summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/freescale/fec_main.c
AgeCommit message (Collapse)Author
2023-05-19net: fec: add dma_wmb to ensure correct descriptor valuesShenwei Wang
Two dma_wmb() are added in the XDP TX path to ensure proper ordering of descriptor and buffer updates: 1. A dma_wmb() is added after updating the last BD to make sure the updates to rest of the descriptor are visible before transferring ownership to FEC. 2. A dma_wmb() is also added after updating the bdp to ensure these updates are visible before updating txq->bd.cur. 3. Start the xmit of the frame immediately right after configuring the tx descriptor. Fixes: 6d6b39f180b8 ("net: fec: add initial XDP support") Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Reviewed-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-15net: fec: remove the xdp_return_frame when lack of tx BDsShenwei Wang
In the implementation, the sent_frame count does not increment when transmit errors occur. Therefore, bq_xmit_all() will take care of returning the XDP frames. Fixes: 26312c685ae0 ("net: fec: correct the counting of XDP sent frames") Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-11net: fec: Better handle pm_runtime_get() failing in .remove()Uwe Kleine-König
In the (unlikely) event that pm_runtime_get() (disguised as pm_runtime_resume_and_get()) fails, the remove callback returned an error early. The problem with this is that the driver core ignores the error value and continues removing the device. This results in a resource leak. Worse the devm allocated resources are freed and so if a callback of the driver is called later the register mapping is already gone which probably results in a crash. Fixes: a31eda65ba21 ("net: fec: fix clock count mis-match") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230510200020.1534610-1-u.kleine-koenig@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-05net: fec: correct the counting of XDP sent framesShenwei Wang
In the current xdp_xmit implementation, if any single frame fails to transmit due to insufficient buffer descriptors, the function nevertheless reports success in sending all frames. This results in erroneously indicating that frames were transmitted when in fact they were dropped. This patch fixes the issue by ensureing the return value properly indicates the actual number of frames successfully transmitted, rather than potentially reporting success for all frames when some could not transmit. Fixes: 6d6b39f180b8 ("net: fec: add initial XDP support") Signed-off-by: Gagandeep Singh <g.singh@nxp.com> Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-05net: fec: make use of MDIO C45 quirkGreg Ungerer
Not all fec MDIO bus drivers support C45 mode transactions. The older fec hardware block in many ColdFire SoCs does not appear to support them, at least according to most of the different ColdFire SoC reference manuals. The bits used to generate C45 access on the iMX parts, in the OP field of the MMFR register, are documented as generating non-compliant MII frames (it is not documented as to exactly how they are non-compliant). Commit 8d03ad1ab0b0 ("net: fec: Separate C22 and C45 transactions") means the fec driver will always register c45 MDIO read and write methods. During probe these will always be accessed now generating non-compliant MII accesses on ColdFire based devices. Add a quirk define, FEC_QUIRK_HAS_MDIO_C45, that can be used to distinguish silicon that supports MDIO C45 framing or not. Add this to all the existing iMX quirks, so they will be behave as they do now (*). (*) it seems that some iMX parts may not support C45 transactions either. The iMX25 and iMX50 Reference Manuals contain similar wording to the ColdFire Reference Manuals on this. Fixes: 8d03ad1ab0b0 ("net: fec: Separate C22 and C45 transactions") Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Reviewed-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230404052207.3064861-1-gerg@linux-m68k.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-16net: Use of_property_read_bool() for boolean propertiesRob Herring
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to of_property_read_bool(). Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for net/can Acked-by: Kalle Valo <kvalo@kernel.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Reviewed-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-02net: fec: do not double-parse 'phy-reset-active-high' propertyDmitry Torokhov
Conversion to gpiod API done in commit 468ba54bd616 ("fec: convert to gpio descriptor") clashed with gpiolib applying the same quirk to the reset GPIO polarity (introduced in commit b02c85c9458c). This results in the reset line being left active/device being left in reset state when reset line is "active low". Remove handling of 'phy-reset-active-high' property from the driver and rely on gpiolib to apply needed adjustments to avoid ending up with the double inversion/flipped logic. Fixes: 468ba54bd616 ("fec: convert to gpio descriptor") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230201215320.528319-2-dmitry.torokhov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-02net: fec: restore handling of PHY reset line as optionalDmitry Torokhov
Conversion of the driver to gpiod API done in 468ba54bd616 ("fec: convert to gpio descriptor") incorrectly made reset line mandatory and resulted in aborting driver probe in cases where reset line was not specified (note: this way of specifying PHY reset line is actually deprecated). Switch to using devm_gpiod_get_optional() and skip manipulating reset line if it can not be located. Fixes: 468ba54bd616 ("fec: convert to gpio descriptor") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230201215320.528319-1-dmitry.torokhov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-30fec: convert to gpio descriptorArnd Bergmann
The driver can be trivially converted, as it only triggers the gpio pin briefly to do a reset, and it already only supports DT. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: drivers/net/ethernet/intel/ice/ice_main.c 418e53401e47 ("ice: move devlink port creation/deletion") 643ef23bd9dd ("ice: Introduce local var for readability") https://lore.kernel.org/all/20230127124025.0dacef40@canb.auug.org.au/ https://lore.kernel.org/all/20230124005714.3996270-1-anthony.l.nguyen@intel.com/ drivers/net/ethernet/engleder/tsnep_main.c 3d53aaef4332 ("tsnep: Fix TX queue stop/wake for multiple queues") 25faa6a4c5ca ("tsnep: Replace TX spin_lock with __netif_tx_lock") https://lore.kernel.org/all/20230127123604.36bb3e99@canb.auug.org.au/ net/netfilter/nf_conntrack_proto_sctp.c 13bd9b31a969 ("Revert "netfilter: conntrack: add sctp DATA_SENT state"") a44b7651489f ("netfilter: conntrack: unify established states for SCTP paths") f71cb8f45d09 ("netfilter: conntrack: sctp: use nf log infrastructure for invalid packets") https://lore.kernel.org/all/20230127125052.674281f9@canb.auug.org.au/ https://lore.kernel.org/all/d36076f3-6add-a442-6d4b-ead9f7ffff86@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-23net: fec: Use page_pool_put_full_page when freeing rx buffersWei Fang
The page_pool_release_page was used when freeing rx buffers, and this function just unmaps the page (if mapped) and does not recycle the page. So after hundreds of down/up the eth0, the system will out of memory. For more details, please refer to the following reproduce steps and bug logs. To solve this issue and refer to the doc of page pool, the page_pool_put_full_page should be used to replace page_pool_release_page. Because this API will try to recycle the page if the page refcnt equal to 1. After testing 20000 times, the issue can not be reproduced anymore (about testing 391 times the issue will occur on i.MX8MN-EVK before). Reproduce steps: Create the test script and run the script. The script content is as follows: LOOPS=20000 i=1 while [ $i -le $LOOPS ] do echo "TINFO:ENET $curface up and down test $i times" org_macaddr=$(cat /sys/class/net/eth0/address) ifconfig eth0 down ifconfig eth0 hw ether $org_macaddr up i=$(expr $i + 1) done sleep 5 if cat /sys/class/net/eth0/operstate | grep 'up';then echo "TEST PASS" else echo "TEST FAIL" fi Bug detail logs: TINFO:ENET up and down test 391 times [ 850.471205] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) [ 853.535318] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 853.541694] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 870.590531] page_pool_release_retry() stalled pool shutdown 199 inflight 60 sec [ 931.006557] page_pool_release_retry() stalled pool shutdown 199 inflight 120 sec TINFO:ENET up and down test 392 times [ 991.426544] page_pool_release_retry() stalled pool shutdown 192 inflight 181 sec [ 1051.838531] page_pool_release_retry() stalled pool shutdown 170 inflight 241 sec [ 1093.751217] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) [ 1096.446520] page_pool_release_retry() stalled pool shutdown 308 inflight 60 sec [ 1096.831245] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 1096.839092] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1112.254526] page_pool_release_retry() stalled pool shutdown 103 inflight 302 sec [ 1156.862533] page_pool_release_retry() stalled pool shutdown 308 inflight 120 sec [ 1172.674516] page_pool_release_retry() stalled pool shutdown 103 inflight 362 sec [ 1217.278532] page_pool_release_retry() stalled pool shutdown 308 inflight 181 sec TINFO:ENET up and down test 393 times [ 1233.086535] page_pool_release_retry() stalled pool shutdown 103 inflight 422 sec [ 1277.698513] page_pool_release_retry() stalled pool shutdown 308 inflight 241 sec [ 1293.502525] page_pool_release_retry() stalled pool shutdown 86 inflight 483 sec [ 1338.110518] page_pool_release_retry() stalled pool shutdown 308 inflight 302 sec [ 1353.918540] page_pool_release_retry() stalled pool shutdown 32 inflight 543 sec [ 1361.179205] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) [ 1364.255298] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 1364.263189] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1371.998532] page_pool_release_retry() stalled pool shutdown 310 inflight 60 sec [ 1398.530542] page_pool_release_retry() stalled pool shutdown 308 inflight 362 sec [ 1414.334539] page_pool_release_retry() stalled pool shutdown 16 inflight 604 sec [ 1432.414520] page_pool_release_retry() stalled pool shutdown 310 inflight 120 sec [ 1458.942523] page_pool_release_retry() stalled pool shutdown 308 inflight 422 sec [ 1474.750521] page_pool_release_retry() stalled pool shutdown 16 inflight 664 sec TINFO:ENET up and down test 394 times [ 1492.830522] page_pool_release_retry() stalled pool shutdown 310 inflight 181 sec [ 1519.358519] page_pool_release_retry() stalled pool shutdown 308 inflight 483 sec [ 1535.166545] page_pool_release_retry() stalled pool shutdown 2 inflight 724 sec [ 1537.090278] eth_test2.sh invoked oom-killer: gfp_mask=0x400dc0(GFP_KERNEL_ACCOUNT|__GFP_ZERO), order=0, oom_score_adj=0 [ 1537.101192] CPU: 3 PID: 2379 Comm: eth_test2.sh Tainted: G C 6.1.1+g56321e101aca #1 [ 1537.110249] Hardware name: NXP i.MX8MNano EVK board (DT) [ 1537.115561] Call trace: [ 1537.118005] dump_backtrace.part.0+0xe0/0xf0 [ 1537.122289] show_stack+0x18/0x40 [ 1537.125608] dump_stack_lvl+0x64/0x80 [ 1537.129276] dump_stack+0x18/0x34 [ 1537.132592] dump_header+0x44/0x208 [ 1537.136083] oom_kill_process+0x2b4/0x2c0 [ 1537.140097] out_of_memory+0xe4/0x594 [ 1537.143766] __alloc_pages+0xb68/0xd00 [ 1537.147521] alloc_pages+0xac/0x160 [ 1537.151013] __get_free_pages+0x14/0x40 [ 1537.154851] pgd_alloc+0x1c/0x30 [ 1537.158082] mm_init+0xf8/0x1d0 [ 1537.161228] mm_alloc+0x48/0x60 [ 1537.164368] alloc_bprm+0x7c/0x240 [ 1537.167777] do_execveat_common.isra.0+0x70/0x240 [ 1537.172486] __arm64_sys_execve+0x40/0x54 [ 1537.176502] invoke_syscall+0x48/0x114 [ 1537.180255] el0_svc_common.constprop.0+0xcc/0xec [ 1537.184964] do_el0_svc+0x2c/0xd0 [ 1537.188280] el0_svc+0x2c/0x84 [ 1537.191340] el0t_64_sync_handler+0xf4/0x120 [ 1537.195613] el0t_64_sync+0x18c/0x190 [ 1537.199334] Mem-Info: [ 1537.201620] active_anon:342 inactive_anon:10343 isolated_anon:0 [ 1537.201620] active_file:54 inactive_file:112 isolated_file:0 [ 1537.201620] unevictable:0 dirty:0 writeback:0 [ 1537.201620] slab_reclaimable:2620 slab_unreclaimable:7076 [ 1537.201620] mapped:1489 shmem:2473 pagetables:466 [ 1537.201620] sec_pagetables:0 bounce:0 [ 1537.201620] kernel_misc_reclaimable:0 [ 1537.201620] free:136672 free_pcp:96 free_cma:129241 [ 1537.240419] Node 0 active_anon:1368kB inactive_anon:41372kB active_file:216kB inactive_file:5052kB unevictable:0kB isolated(anon):0kB isolated(file):0kB s [ 1537.271422] Node 0 DMA free:541636kB boost:0kB min:30000kB low:37500kB high:45000kB reserved_highatomic:0KB active_anon:1368kB inactive_anon:41372kB actiB [ 1537.300219] lowmem_reserve[]: 0 0 0 0 [ 1537.303929] Node 0 DMA: 1015*4kB (UMEC) 743*8kB (UMEC) 417*16kB (UMEC) 235*32kB (UMEC) 116*64kB (UMEC) 25*128kB (UMEC) 4*256kB (UC) 2*512kB (UC) 0*1024kBB [ 1537.323938] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=1048576kB [ 1537.332708] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=32768kB [ 1537.341292] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB [ 1537.349776] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=64kB [ 1537.358087] 2939 total pagecache pages [ 1537.361876] 0 pages in swap cache [ 1537.365229] Free swap = 0kB [ 1537.368147] Total swap = 0kB [ 1537.371065] 516096 pages RAM [ 1537.373959] 0 pages HighMem/MovableOnly [ 1537.377834] 17302 pages reserved [ 1537.381103] 163840 pages cma reserved [ 1537.384809] 0 pages hwpoisoned [ 1537.387902] Tasks state (memory values in pages): [ 1537.392652] [ pid ] uid tgid total_vm rss pgtables_bytes swapents oom_score_adj name [ 1537.401356] [ 201] 993 201 1130 72 45056 0 0 rpcbind [ 1537.409772] [ 202] 0 202 4529 1640 77824 0 -250 systemd-journal [ 1537.418861] [ 222] 0 222 4691 801 69632 0 -1000 systemd-udevd [ 1537.427787] [ 248] 994 248 20914 130 65536 0 0 systemd-timesyn [ 1537.436884] [ 497] 0 497 620 31 49152 0 0 atd [ 1537.444938] [ 500] 0 500 854 77 53248 0 0 crond [ 1537.453165] [ 503] 997 503 1470 160 49152 0 -900 dbus-daemon [ 1537.461908] [ 505] 0 505 633 24 40960 0 0 firmwared [ 1537.470491] [ 513] 0 513 2507 180 61440 0 0 ofonod [ 1537.478800] [ 514] 990 514 69640 137 81920 0 0 parsec [ 1537.487120] [ 533] 0 533 599 39 40960 0 0 syslogd [ 1537.495518] [ 534] 0 534 4546 148 65536 0 0 systemd-logind [ 1537.504560] [ 535] 0 535 690 24 45056 0 0 tee-supplicant [ 1537.513564] [ 540] 996 540 2769 168 61440 0 0 systemd-network [ 1537.522680] [ 566] 0 566 3878 228 77824 0 0 connmand [ 1537.531168] [ 645] 998 645 1538 133 57344 0 0 avahi-daemon [ 1537.540004] [ 646] 998 646 1461 64 57344 0 0 avahi-daemon [ 1537.548846] [ 648] 992 648 781 41 45056 0 0 rpc.statd [ 1537.557415] [ 650] 64371 650 590 23 45056 0 0 ninfod [ 1537.565754] [ 653] 61563 653 555 24 45056 0 0 rdisc [ 1537.573971] [ 655] 0 655 374569 2999 290816 0 -999 containerd [ 1537.582621] [ 658] 0 658 1311 20 49152 0 0 agetty [ 1537.590922] [ 663] 0 663 1529 97 49152 0 0 login [ 1537.599138] [ 666] 0 666 3430 202 69632 0 0 wpa_supplicant [ 1537.608147] [ 667] 0 667 2344 96 61440 0 0 systemd-userdbd [ 1537.617240] [ 677] 0 677 2964 314 65536 0 100 systemd [ 1537.625651] [ 679] 0 679 3720 646 73728 0 100 (sd-pam) [ 1537.634138] [ 687] 0 687 1289 403 45056 0 0 sh [ 1537.642108] [ 789] 0 789 970 93 45056 0 0 eth_test2.sh [ 1537.650955] [ 2355] 0 2355 2346 94 61440 0 0 systemd-userwor [ 1537.660046] [ 2356] 0 2356 2346 94 61440 0 0 systemd-userwor [ 1537.669137] [ 2358] 0 2358 2346 95 57344 0 0 systemd-userwor [ 1537.678258] [ 2379] 0 2379 970 93 45056 0 0 eth_test2.sh [ 1537.687098] oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null),cpuset=/,mems_allowed=0,global_oom,task_memcg=/user.slice/user-0.slice/user@0.service,tas0 [ 1537.703009] Out of memory: Killed process 679 ((sd-pam)) total-vm:14880kB, anon-rss:2584kB, file-rss:0kB, shmem-rss:0kB, UID:0 pgtables:72kB oom_score_ad0 [ 1553.246526] page_pool_release_retry() stalled pool shutdown 310 inflight 241 sec Fixes: 95698ff6177b ("net: fec: using page pool to manage RX buffers") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: shenwei wang <Shenwei.wang@nxp.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-10net: fec: Separate C22 and C45 transactionsAndrew Lunn
The fec MDIO bus driver can perform both C22 and C45 transfers. Create separate functions for each and register the C45 versions using the new API calls where appropriate. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-20net: fec: check the return value of build_skb()Wei Fang
The build_skb might return a null pointer but there is no check on the return value in the fec_enet_rx_queue(). So a null pointer dereference might occur. To avoid this, we check the return value of build_skb. If the return value is a null pointer, the driver will recycle the page and update the statistic of ndev. Then jump to rx_processing_done to clear the status flags of the BD so that the hardware can recycle the BD. Fixes: 95698ff6177b ("net: fec: using page pool to manage RX buffers") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Shenwei Wang <Shenwei.wang@nxp.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20221219022755.1047573-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-12-06net: fec: properly guard irq coalesce setupRasmus Villemoes
Prior to the Fixes: commit, the initialization code went through the same fec_enet_set_coalesce() function as used by ethtool, and that function correctly checks whether the current variant has support for irq coalescing. Now that the initialization code instead calls fec_enet_itr_coal_set() directly, that call needs to be guarded by a check for the FEC_QUIRK_HAS_COALESCE bit. Fixes: df727d4547de (net: fec: don't reset irq coalesce settings to defaults on "ip link up") Reported-by: Greg Ungerer <gregungerer@westnet.com.au> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221205204604.869853-1-linux@rasmusvillemoes.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
tools/lib/bpf/ringbuf.c 927cbb478adf ("libbpf: Handle size overflow for ringbuf mmap") b486d19a0ab0 ("libbpf: checkpatch: Fixed code alignments in ringbuf.c") https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-25net: fec: don't reset irq coalesce settings to defaults on "ip link up"Rasmus Villemoes
Currently, when a FEC device is brought up, the irq coalesce settings are reset to their default values (1000us, 200 frames). That's unexpected, and breaks for example use of an appropriate .link file to make systemd-udev apply the desired settings (https://www.freedesktop.org/software/systemd/man/systemd.link.html), or any other method that would do a one-time setup during early boot. Refactor the code so that fec_restart() instead uses fec_enet_itr_coal_set(), which simply applies the settings that are stored in the private data, and initialize that private data with the default values. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-14net: fec: add xdp and page pool statisticsShenwei Wang
Added xdp and page pool statistics. In order to make the implementation simple and compatible, the patch uses the 32bit integer to record the XDP statistics. Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07net: fec: simplify the code logic of quirksShenwei Wang
Simplify the code logic of handling the quirk of FEC_QUIRK_HAS_RACC. If a SoC has the RACC quirk, the driver will enable the 16bit shift by default in the probe function for a better performance. This patch handles the logic in one place to make the logic simple and clean. The patch optimizes the fec_enet_xdp_get_tx_queue function according to Paolo Abeni's comments, and it also exludes the SoCs that require to do frame swap from XDP support. Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-03net: fec: add initial XDP supportShenwei Wang
This patch adds the initial XDP support to Freescale driver. It supports XDP_PASS, XDP_DROP and XDP_REDIRECT actions. Upcoming patches will add support for XDP_TX and Zero Copy features. As the patch is rather large, the part of codes to collect the statistics is separated and will prepare a dedicated patch for that part. I just tested with the application of xdpsock. -- Native here means running command of "xdpsock -i eth0" -- SKB-Mode means running command of "xdpsock -S -i eth0" The following are the testing result relating to XDP mode: root@imx8qxpc0mek:~/bpf# ./xdpsock -i eth0 sock0@eth0:0 rxdrop xdp-drv pps pkts 1.00 rx 371347 2717794 tx 0 0 root@imx8qxpc0mek:~/bpf# ./xdpsock -S -i eth0 sock0@eth0:0 rxdrop xdp-skb pps pkts 1.00 rx 202229 404528 tx 0 0 root@imx8qxpc0mek:~/bpf# ./xdp2 eth0 proto 0: 496708 pkt/s proto 0: 505469 pkt/s proto 0: 505283 pkt/s proto 0: 505443 pkt/s proto 0: 505465 pkt/s root@imx8qxpc0mek:~/bpf# ./xdp2 -S eth0 proto 0: 0 pkt/s proto 17: 118778 pkt/s proto 17: 118989 pkt/s proto 0: 1 pkt/s proto 17: 118987 pkt/s proto 0: 0 pkt/s proto 17: 118943 pkt/s proto 17: 118976 pkt/s proto 0: 1 pkt/s proto 17: 119006 pkt/s proto 0: 0 pkt/s proto 17: 119071 pkt/s proto 17: 119092 pkt/s Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20221031185350.2045675-1-shenwei.wang@nxp.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-10-31net: fec: fix improper use of NETDEV_TX_BUSYZhang Changzhong
The ndo_start_xmit() method must not free skb when returning NETDEV_TX_BUSY, since caller is going to requeue freed skb. Fix it by returning NETDEV_TX_OK in case of dma_map_single() fails. Fixes: 79f339125ea3 ("net: fec: Add software TSO support") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-31drivers: net: convert to boolean for the mac_managed_pm flagDenis Kirjanov
Signed-off-by: Dennis Kirjanov <dkirjanov@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c 2871edb32f46 ("can: kvaser_usb: Fix possible completions during init_completion") abb8670938b2 ("can: kvaser_usb_leaf: Ignore stale bus-off after start") 8d21f5927ae6 ("can: kvaser_usb_leaf: Fix improved state not being reported") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-26net: fec: limit register access on i.MX6ULJuergen Borleis
Using 'ethtool -d […]' on an i.MX6UL leads to a kernel crash: Unhandled fault: external abort on non-linefetch (0x1008) at […] due to this SoC has less registers in its FEC implementation compared to other i.MX6 variants. Thus, a run-time decision is required to avoid access to non-existing registers. Fixes: a51d3ab50702 ("net: fec: use a more proper compatible string for i.MX6UL type device") Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221024080552.21004-1-jbe@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-18net: fec: remove the unused functionsShenwei Wang
Removed those unused functions since we simplified the driver by using the page pool to manage RX buffers. Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Link: https://lore.kernel.org/r/20221017161236.1563975-1-shenwei.wang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net: fec: using page pool to manage RX buffersShenwei Wang
This patch optimizes the RX buffer management by using the page pool. The purpose for this change is to prepare for the following XDP support. The current driver uses one frame per page for easy management. Added __maybe_unused attribute to the following functions to avoid the compiling warning. Those functions will be removed by a separate patch once this page pool solution is accepted. - fec_enet_new_rxbdp - fec_enet_copybreak The following are the comparing result between page pool implementation and the original implementation (non page pool). --- small packet (64 bytes) testing are almost the same --- no matter what the implementation is --- on both i.MX8 and i.MX6SX platforms. shenwei@5810:~/pktgen$ iperf -c 10.81.16.245 -w 2m -i 1 -l 64 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 39728 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 37.0 MBytes 311 Mbits/sec [ 1] 1.0000-2.0000 sec 36.6 MBytes 307 Mbits/sec [ 1] 2.0000-3.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 3.0000-4.0000 sec 37.1 MBytes 312 Mbits/sec [ 1] 4.0000-5.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 5.0000-6.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 6.0000-7.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 7.0000-8.0000 sec 37.2 MBytes 312 Mbits/sec [ 1] 0.0000-8.0943 sec 299 MBytes 310 Mbits/sec --- Page Pool implementation on i.MX8 ---- shenwei@5810:~$ iperf -c 10.81.16.245 -w 2m -i 1 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 43204 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 111 MBytes 933 Mbits/sec [ 1] 1.0000-2.0000 sec 111 MBytes 934 Mbits/sec [ 1] 2.0000-3.0000 sec 112 MBytes 935 Mbits/sec [ 1] 3.0000-4.0000 sec 111 MBytes 933 Mbits/sec [ 1] 4.0000-5.0000 sec 111 MBytes 934 Mbits/sec [ 1] 5.0000-6.0000 sec 111 MBytes 933 Mbits/sec [ 1] 6.0000-7.0000 sec 111 MBytes 931 Mbits/sec [ 1] 7.0000-8.0000 sec 112 MBytes 935 Mbits/sec [ 1] 8.0000-9.0000 sec 111 MBytes 933 Mbits/sec [ 1] 9.0000-10.0000 sec 112 MBytes 935 Mbits/sec [ 1] 0.0000-10.0077 sec 1.09 GBytes 933 Mbits/sec --- Non Page Pool implementation on i.MX8 ---- shenwei@5810:~$ iperf -c 10.81.16.245 -w 2m -i 1 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 49154 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 104 MBytes 868 Mbits/sec [ 1] 1.0000-2.0000 sec 105 MBytes 878 Mbits/sec [ 1] 2.0000-3.0000 sec 105 MBytes 881 Mbits/sec [ 1] 3.0000-4.0000 sec 105 MBytes 879 Mbits/sec [ 1] 4.0000-5.0000 sec 105 MBytes 878 Mbits/sec [ 1] 5.0000-6.0000 sec 105 MBytes 878 Mbits/sec [ 1] 6.0000-7.0000 sec 104 MBytes 875 Mbits/sec [ 1] 7.0000-8.0000 sec 104 MBytes 875 Mbits/sec [ 1] 8.0000-9.0000 sec 104 MBytes 873 Mbits/sec [ 1] 9.0000-10.0000 sec 104 MBytes 875 Mbits/sec [ 1] 0.0000-10.0073 sec 1.02 GBytes 875 Mbits/sec --- Page Pool implementation on i.MX6SX ---- shenwei@5810:~/pktgen$ iperf -c 10.81.16.245 -w 2m -i 1 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 57288 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 78.8 MBytes 661 Mbits/sec [ 1] 1.0000-2.0000 sec 82.5 MBytes 692 Mbits/sec [ 1] 2.0000-3.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 3.0000-4.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 4.0000-5.0000 sec 82.5 MBytes 692 Mbits/sec [ 1] 5.0000-6.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 6.0000-7.0000 sec 82.5 MBytes 692 Mbits/sec [ 1] 7.0000-8.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 8.0000-9.0000 sec 82.4 MBytes 691 Mbits/sec [ 1] 9.0000-9.5506 sec 45.0 MBytes 686 Mbits/sec [ 1] 0.0000-9.5506 sec 783 MBytes 688 Mbits/sec --- Non Page Pool implementation on i.MX6SX ---- shenwei@5810:~/pktgen$ iperf -c 10.81.16.245 -w 2m -i 1 ------------------------------------------------------------ Client connecting to 10.81.16.245, TCP port 5001 TCP window size: 416 KByte (WARNING: requested 1.91 MByte) ------------------------------------------------------------ [ 1] local 10.81.17.20 port 36486 connected with 10.81.16.245 port 5001 [ ID] Interval Transfer Bandwidth [ 1] 0.0000-1.0000 sec 70.5 MBytes 591 Mbits/sec [ 1] 1.0000-2.0000 sec 64.5 MBytes 541 Mbits/sec [ 1] 2.0000-3.0000 sec 73.6 MBytes 618 Mbits/sec [ 1] 3.0000-4.0000 sec 73.6 MBytes 618 Mbits/sec [ 1] 4.0000-5.0000 sec 72.9 MBytes 611 Mbits/sec [ 1] 5.0000-6.0000 sec 73.4 MBytes 616 Mbits/sec [ 1] 6.0000-7.0000 sec 73.5 MBytes 617 Mbits/sec [ 1] 7.0000-8.0000 sec 73.4 MBytes 616 Mbits/sec [ 1] 8.0000-9.0000 sec 73.4 MBytes 616 Mbits/sec [ 1] 9.0000-10.0000 sec 73.9 MBytes 620 Mbits/sec [ 1] 0.0000-10.0174 sec 723 MBytes 605 Mbits/sec Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/ethernet/freescale/fec.h 7b15515fc1ca ("Revert "fec: Restart PPS after link state change"") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/ drivers/pinctrl/pinctrl-ocelot.c c297561bc98a ("pinctrl: ocelot: Fix interrupt controller") 181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration") https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/ tools/testing/selftests/drivers/net/bonding/Makefile bbb774d921e2 ("net: Add tests for bonding and team address list management") 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target") https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/ drivers/net/can/usb/gs_usb.c 5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition") 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20Revert "net: fec: Use a spinlock to guard `fep->ptp_clk_on`"Francesco Dolcini
This reverts commit b353b241f1eb9b6265358ffbe2632fdcb563354f, this is creating multiple issues, just not ready to be merged yet. Link: https://lore.kernel.org/all/CAHk-=wj1obPoTu1AHj9Bd_BGYjdjDyPP+vT5WMj8eheb3A9WHw@mail.gmail.com/ Link: https://lore.kernel.org/all/20220907143915.5w65kainpykfobte@pengutronix.de/ Fixes: b353b241f1eb ("net: fec: Use a spinlock to guard `fep->ptp_clk_on`") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-20Revert "fec: Restart PPS after link state change"Francesco Dolcini
This reverts commit f79959220fa5fbda939592bf91c7a9ea90419040, this is creating multiple issues, just not ready to be merged yet. Link: https://lore.kernel.org/all/20220905180542.GA3685102@roeck-us.net/ Link: https://lore.kernel.org/all/CAHk-=wj1obPoTu1AHj9Bd_BGYjdjDyPP+vT5WMj8eheb3A9WHw@mail.gmail.com/ Fixes: f79959220fa5 ("fec: Restart PPS after link state change") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-19net: fec: Add initial s32v234 supportWei Fang
Update Kconfig to also check for ARCH_S32. Add compatible string and quirks for fsl,s32v234 Signed-off-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-16net: fec: add pm runtime force suspend and resume supportWei Fang
Force mii bus into runtime pm suspend state during device suspends, since phydev state is already PHY_HALTED, and there is no need to access mii bus during device suspend state. Then force mii bus into runtime pm resume state when device resumes. Signed-off-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
drivers/net/ethernet/freescale/fec.h 7d650df99d52 ("net: fec: add pm_qos support on imx6q platform") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-03net: fec: add stop mode support for imx8 platformWei Fang
The current driver support stop mode by calling machine api. The patch add dts support to set GPR register for stop request. imx8mq enter stop/exit stop mode by setting GPR bit, which can be accessed by A core. imx8qm enter stop/exit stop mode by calling IMX_SC ipc APIs that communicate with M core ipc service, and the M core set the related GPR bit at last. Signed-off-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-02net: fec: Use a spinlock to guard `fep->ptp_clk_on`Csókás Bence
Mutexes cannot be taken in a non-preemptible context, causing a panic in `fec_ptp_save_state()`. Replacing `ptp_clk_mutex` by `tmreg_lock` fixes this. Fixes: 6a4d7234ae9a ("net: fec: ptp: avoid register access when ipg clock is disabled") Fixes: f79959220fa5 ("fec: Restart PPS after link state change") Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/all/20220827160922.642zlcd5foopozru@pengutronix.de/ Signed-off-by: Csókás Bence <csokas.bence@prolan.hu> Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Apalis iMX6 Link: https://lore.kernel.org/r/20220901140402.64804-1-csokas.bence@prolan.hu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-02net: fec: add pm_qos support on imx6q platformWei Fang
There is a very low probability that tx timeout will occur during suspend and resume stress test on imx6q platform. So we add pm_qos support to prevent system from entering low level idles which may affect the transmission of tx. Signed-off-by: Wei Fang <wei.fang@nxp.com> Link: https://lore.kernel.org/r/20220830070148.2021947-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-24fec: Restart PPS after link state changeCsókás Bence
On link state change, the controller gets reset, causing PPS to drop out and the PHC to lose its time and calibration. So we restart it if needed, restoring calibration and time registers. Changes since v2: * Add `fec_ptp_save_state()`/`fec_ptp_restore_state()` * Use `ktime_get_real_ns()` * Use `BIT()` macro Changes since v1: * More ECR #define's * Stop PPS in `fec_ptp_stop()` Signed-off-by: Csókás Bence <csokas.bence@prolan.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02net: add skb_[inner_]tcp_all_headers helpersEric Dumazet
Most drivers use "skb_transport_offset(skb) + tcp_hdrlen(skb)" to compute headers length for a TCP packet, but others use more convoluted (but equivalent) ways. Add skb_tcp_all_headers() and skb_inner_tcp_all_headers() helpers to harmonize this a bit. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/ethernet/cadence/macb_main.c 5cebb40bc955 ("net: macb: Fix PTP one step sync support") 138badbc21a0 ("net: macb: use NAPI for TX completion path") https://lore.kernel.org/all/20220523111021.31489367@canb.auug.org.au/ net/smc/af_smc.c 75c1edf23b95 ("net/smc: postpone sk_refcnt increment in connect()") 3aba103006bc ("net/smc: align the connect behaviour with TCP") https://lore.kernel.org/all/20220524114408.4bf1af38@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-22net: fec: Do proper error checking for enet_out clkUwe Kleine-König
An error code returned by devm_clk_get() might have other meanings than "This clock doesn't exist". So use devm_clk_get_optional() and handle all remaining errors as fatal. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22net: fec: Do proper error checking for optional clksUwe Kleine-König
An error code returned by devm_clk_get() might have other meanings than "This clock doesn't exist". So use devm_clk_get_optional() and handle all remaining errors as fatal. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-19net: fec: Avoid allocating rx buffer using ATOMIC in ndo_openMichael Trimarchi
Make ndo_open less sensitive to memory pressure. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20220518062007.10056-1-michael@amarulasolutions.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-06net: make drivers set the TSO limit not the GSO limitJakub Kicinski
Drivers should call the TSO setting helper, GSO is controllable by user space. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-27net: fec: add missing of_node_put() in fec_enet_init_stop_mode()Yang Yingliang
Put device node in error path in fec_enet_init_stop_mode(). Fixes: 8a448bf832af ("net: ethernet: fec: move GPR register offset and bit into DT") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220426125231.375688-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-24net: use bool values to pass bool param of phy_init_eee()Jisheng Zhang
The 2nd param of phy_init_eee(): clk_stop_enable is a bool param, use true or false instead of 1/0. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220123152241.1480-1-jszhang@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-15net: fec: fix system hang during suspend/resumeJoakim Zhang
1. During normal suspend (WoL not enabled) process, system has posibility to hang. The root cause is TXF interrupt coming after clocks disabled, system hang when accessing registers from interrupt handler. To fix this issue, disable all interrupts when system suspend. 2. System also has posibility to hang with WoL enabled during suspend, after entering stop mode, then magic pattern coming after clocks disabled, system will be waked up, and interrupt handler will be called, system hang when access registers. To fix this issue, disable wakeup irq in .suspend(), and enable it in .resume(). Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-07net: fec: only clear interrupt of handling queue in fec_enet_rx_queue()Joakim Zhang
Background: We have a customer is running a Profinet stack on the 8MM which receives and responds PNIO packets every 4ms and PNIO-CM packets every 40ms. However, from time to time the received PNIO-CM package is "stock" and is only handled when receiving a new PNIO-CM or DCERPC-Ping packet (tcpdump shows the PNIO-CM and the DCERPC-Ping packet at the same time but the PNIO-CM HW timestamp is from the expected 40 ms and not the 2s delay of the DCERPC-Ping). After debugging, we noticed PNIO, PNIO-CM and DCERPC-Ping packets would be handled by different RX queues. The root cause should be driver ack all queues' interrupt when handle a specific queue in fec_enet_rx_queue(). The blamed patch is introduced to receive as much packets as possible once to avoid interrupt flooding. But it's unreasonable to clear other queues'interrupt when handling one queue, this patch tries to fix it. Fixes: ed63f1dcd578 (net: fec: clear receive interrupts before processing a packet) Cc: Russell King <rmk+kernel@arm.linux.org.uk> Reported-by: Nicolas Diaz <nicolas.diaz@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20211206135457.15946-1-qiangqing.zhang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>