summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
AgeCommit message (Collapse)Author
2016-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Just several instances of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-19bnxt_en: Workaround Nitro A0 hardware RX bug (part 2).Prashant Sreedharan
The hardware is unable to drop rx packets not matching the RX filters. To workaround it, we create a special VNIC and configure the hardware to direct all packets not matching the filters to it. We then setup the driver to drop packets received on this VNIC. This patch creates the infrastructure for this VNIC, reserves a completion ring, and rx rings. Only shared completion ring mode is supported. The next 2 patches add a NAPI to handle packets from this VNIC and the setup of the VNIC. Signed-off-by: Prashant Sreedharan <prashant.sreedharan@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-11bnxt_en: initialize rc to zero to avoid returning garbageColin Ian King
rc is not initialized so it can contain garbage if it is not set by the call to bnxt_read_sfp_module_eeprom_info. Ensure garbage is not returned by initializing rc to 0. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-02bnxt_en: Allow statistics DMA to be configurable using ethtool -C.Michael Chan
The allowable range is 0.25 seconds to 1 second interval. Default is 1 second. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-02bnxt_en: Add support for firmware updates for additional processors.Rob Swindell
Add support to the Ethtool FLASHDEV command handler for additional firmware types to cover all the on-chip processors. Signed-off-by: Rob Swindell <rob.swindell@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-02bnxt_en: Request firmware reset after successful firwmare updateRob Swindell
Upon successful mgmt processor firmware update, request a self reset upon next PCIe reset (e.g. system reboot). Signed-off-by: Rob Swindell <rob.swindell@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-02bnxt_en: Add support for updating flash more securelyRob Swindell
To support Secure Firmware Update, we must be able to allocate a staging area in the Flash. This patch adds support for the "update" type to tell firmware to do that. Signed-off-by: Rob Swindell <rob.swindell@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-02bnxt_en: VF/NPAR should return -EOPNOTSUPP for unsupported ethtool ops.Michael Chan
Returning 0 for doing nothing is confusing to the user. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14bnxt_en: Support new ETHTOOL_{G|S}LINKSETTINGS API.Michael Chan
To fully support 25G and 50G link settings. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14bnxt_en: Don't allow autoneg on cards that don't support it.Michael Chan
Some cards do not support autoneg. The current code does not prevent the user from enabling autoneg with ethtool on such cards, causing confusion. Firmware provides the autoneg capability information and we just need to store it in the support_auto_speeds field in bnxt_link_info struct. The ethtool set_settings() call will check this field before proceeding with autoneg. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14bnxt_en: Enable NPAR (NIC Partitioning) Support.Satish Baddipadige
NPAR type is read from bnxt_hwrm_func_qcfg. Do not allow changing link parameters if in NPAR mode sinc ethe port is shared among multiple partitions. The link parameters are set up by firmware. Signed-off-by: Satish Baddipadige <sbaddipa@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-15bnxt_en: Add Support for ETHTOOL_GMODULEINFO and ETHTOOL_GMODULEEEPROAjit Khaparde
Add support to fetch the SFP EEPROM settings from the firmware and display it via the ethtool -m command. We support SFP+ and QSFP modules. v2: Fixed a bug in bnxt_get_module_eeprom() found by Ben Hutchings. Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-15bnxt_en: Fix invalid max channel parameter in ethtool -l.Satish Baddipadige
When there is only 1 MSI-X vector or in INTA mode, tx and rx pre-set max channel parameters are shown incorrectly in ethtool -l. With only 1 vector, bnxt_get_max_rings() will return -ENOMEM. bnxt_get_channels should check this return value, and set max_rx/max_tx to 0 if it is non-zero. Signed-off-by: Satish Baddipadige <sbaddipa@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-11bnxt_en: Disallow forced speed for 10GBaseT devices.Michael Chan
10GBaseT devices must autonegotiate to determine master/slave clocking. Disallow forced speed in ethtool .set_settings() for these devices. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-05bnxt_en: Improve ethtool .get_settings().Michael Chan
If autoneg is off, we should always report the speed and duplex settings even if it is link down so the user knows the current settings. The unknown speed and duplex should only be used for autoneg when link is down. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-05bnxt_en: Check for valid forced speed during ethtool -s.Michael Chan
Check that the forced speed is a valid speed supported by firmware. If not supported, return -EINVAL. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-05bnxt_en: Add get_eee() and set_eee() ethtool support.Michael Chan
Allow users to get|set EEE parameters. v2: Added comment for preserving the tx_lpi_timer value in get_eee. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-05bnxt_en: Add EEE setup code.Michael Chan
1. Add bnxt_hwrm_set_eee() function to setup EEE firmware parameters based on the bp->eee settings. 2. The new function bnxt_eee_config_ok() will check if EEE parameters need to be modified due to autoneg changes. 3. bnxt_hwrm_set_link() has added a new parameter to update EEE. If the parameter is set, it will call bnxt_hwrm_set_eee(). Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-05bnxt_en: Add basic EEE support.Michael Chan
Get EEE capability and the initial EEE settings from firmware. Add "EEE is active | not active" to link up dmesg. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-05bnxt_en: Improve flow control autoneg with Firmware 1.2.1 interface.Michael Chan
Make use of the new AUTONEG_PAUSE bit in the new interface to better control autoneg flow control settings, independent of RX and TX advertisement settings. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-05bnxt_en: Update to Firmware 1.2.2 spec.Michael Chan
Use new field names in API structs and stop using deprecated fields auto_link_speed and auto_duplex in phy_cfg/phy_qcfg structs. Update copyright year to 2016. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-30bnxt_en: Fix ethtool -a reporting.Michael Chan
To report flow control tx/rx settings accurately regardless of autoneg setting, we should use link_info->req_flow_ctrl. Before this patch, the reported settings were only correct when autoneg was on. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08bnxt_en: Include hardware port statistics in ethtool -S.Michael Chan
Include the more useful port statistics in ethtool -S for the PF device. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08bnxt_en: Extend autoneg to all speeds.Michael Chan
Allow all autoneg speeds aupported by firmware to be advertised. If the advertising parameter is 0, then all supported speeds will be advertised. Remove BNXT_ALL_COPPER_ETHTOOL_SPEED which is no longer used as all supported speeds can be advertised. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08bnxt_en: Use common function to get ethtool supported flags.Michael Chan
The supported bits and advertising bits in ethtool have the same definitions. The same is true for the firmware bits. So use the common function to handle the conversion for both supported and advertising bits. v2: Don't use parentheses on function return. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08bnxt_en: Add reporting of link partner advertisement.Michael Chan
And report actual pause settings to ETHTOOL_GPAUSEPARAM to let ethtool resolve the actual pause settings. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08bnxt_en: Refactor bnxt_fw_to_ethtool_advertised_spds().Michael Chan
Include the conversion of pause bits and add one extra call layer so that the same refactored function can be reused to get the link partner advertisement bits. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01bnxt_en: Add hwrm_send_message_silent().Michael Chan
This is used to send NVM_FIND_DIR_ENTRY messages which can return error if the entry is not found. This is normal and the error message will cause unnecessary alarm, so silence it. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01bnxt_en: Add installed-package firmware version reporting via Ethtool GDRVINFORob Swindell
For everything to fit, we remove the PHY microcode version and replace it with the firmware package version in the fw_version string. Signed-off-by: Rob Swindell <swindell@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01bnxt_en: Add coalescing support for tx rings.Michael Chan
When tx and rx rings don't share the same completion ring, tx coalescing parameters can be set differently from the rx coalescing parameters. Otherwise, use rx coalescing parameters on shared completion rings. Adjust rx coalescing default values to lower interrupt rate. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01bnxt_en: Store irq coalescing timer values in micro seconds.Michael Chan
Don't convert these to internal hardware tick values before storing them. This avoids the confusion of ethtool -c returning slightly different values than the ones set using ethtool -C when we convert hardware tick values back to micro seconds. Add better comments for the hardware settings. Also, rename the current set of coalescing fields with rx_ prefix. The next patch will add support of tx coalescing values. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16bnxt_en: Remove 20G support and advertise only 40GbaseCR4.Michael Chan
20G is not supported by production hardware and only the 40GbaseCR4 standard is supported. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16bnxt_en: Cleanup and Fix flow control setup logicMichael Chan
Cleanup bnxt_probe_phy() to cleanly separate 2 code blocks for autoneg on and off. Autoneg flow control is possible only if autoneg is enabled. In bnxt_get_settings(), Pause and Asym_Pause are always supported. Only the advertisement bits change depending on the ethtool -A setting in auto mode. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16bnxt_en: Fix ethtool autoneg logic.Michael Chan
1. Determine autoneg on|off setting from link_info->autoneg. Using the firmware returned setting can be misleading if autoneg is changed and there hasn't been a phy update from the firmware. 2. If autoneg is disabled, link_info->autoneg should be set to 0 to indicate both speed and flow control autoneg are disabled. 3. To enable autoneg flow control, speed autoneg must be enabled. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10bnxt_en: Reset embedded processor after applying firmware upgradeRob Swindell
Use HWRM_FW_RESET command to request a self-reset of the embedded processor(s) after successfully applying a firmware update. For boot processor, the self-reset is currently deferred until the next PCIe reset. Signed-off-by: Rob Swindell <swindell@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04bnxt_en: Modify ethtool -l|-L to support combined or rx/tx rings.Michael Chan
The driver can support either all combined or all rx/tx rings. The default is combined, but the user can now select rx/tx rings. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04bnxt_en: Modify bnxt_get_max_rings() to support shared or non shared rings.Michael Chan
Add logic to calculate how many shared or non shared rings can be supported. Default is to use shared rings. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-28bnxt_en: Check hardware resources before enabling NTUPLE.Michael Chan
The hardware resources required to enable NTUPLE varies depending on how many rx channels are configured. We need to make sure we have the resources before we enable NTUPLE. Add bnxt_rfs_capable() to do the checking. In addition, we need to do the same checking in ndo_fix_features(). As the rx channels are changed using ethtool -L, we call netdev_update_features() to make the necessary adjustment for NTUPLE. Calling netdev_update_features() in netif_running() state but before calling bnxt_open_nic() would be a problem. To make this work, bnxt_set_features() has to be modified to test for BNXT_STATE_OPEN for the true hardware state instead of checking netif_running(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-28bnxt_en: Add support for upgrading APE/NC-SI firmware via Ethtool FLASHDEVRob Swindell
NC-SI firmware of type apeFW (10) is now supported. Signed-off-by: Rob Swindell <swindell@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22bnxt_en: New Broadcom ethernet driver.Michael Chan
Broadcom ethernet driver for the new family of NetXtreme-C/E ethernet devices. v5: - Removed empty blank lines at end of files (noted by David Miller). - Moved busy poll helper functions to bnxt.h to at least make the .c file look less cluttered with #ifdef (noted by Stephen Hemminger). v4: - Broke up 2 long message strings with "\n" (suggested by John Linville) - Constify an array of strings (suggested by Stephen Hemminger) - Improve bnxt_vf_pciid() (suggested by Stephen Hemminger) - Use PCI_VDEVICE() to populate pci_device_id table for more compact source. v3: - Fixed 2 more sparse warnings. - Removed some unused structures in .h files. v2: - Fixed all kbuild test robot reported warnings. - Fixed many of the checkpatch.pl errors and warnings. - Fixed the Kconfig description (noted by Dmitry Kravkov). Acked-by: Eddie Wai <eddie.wai@broadcom.com> Acked-by: Jeffrey Huang <huangjw@broadcom.com> Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>