summaryrefslogtreecommitdiff
path: root/drivers/media/platform/exynos4-is/fimc-lite.c
AgeCommit message (Collapse)Author
2021-06-17media: v4l2-subdev: add subdev-wide state structTomi Valkeinen
We have 'struct v4l2_subdev_pad_config' which contains configuration for a single pad used for the TRY functionality, and an array of those structs is passed to various v4l2_subdev_pad_ops. I was working on subdev internal routing between pads, and realized that there's no way to add TRY functionality for routes, which is not pad specific configuration. Adding a separate struct for try-route config wouldn't work either, as e.g. set-fmt needs to know the try-route configuration to propagate the settings. This patch adds a new struct, 'struct v4l2_subdev_state' (which at the moment only contains the v4l2_subdev_pad_config array) and the new struct is used in most of the places where v4l2_subdev_pad_config was used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config are changed to instead take v4l2_subdev_state. The changes to drivers/media/v4l2-core/v4l2-subdev.c and include/media/v4l2-subdev.h were written by hand, and all the driver changes were done with the semantic patch below. The spatch needs to be applied to a select list of directories. I used the following shell commands to apply the spatch: dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media" for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done Note that Coccinelle chokes on a few drivers (gcc extensions?). With minor changes we can make Coccinelle run fine, and these changes can be reverted after spatch. The diff for these changes is: For drivers/media/i2c/s5k5baf.c: @@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd, &s5k5baf_cis_rect, v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS), v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS), - v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT) + v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT), }; s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r); return 0; For drivers/media/platform/s3c-camif/camif-capture.c: @@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd, *mf = camif->mbus_fmt; break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* crop rectangle at camera interface input */ mf->width = camif->camif_crop.width; mf->height = camif->camif_crop.height; @@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd, } break; - case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P: + case CAMIF_SD_PAD_SOURCE_C: /* Pixel format can be only changed on the sink pad. */ mf->code = camif->mbus_fmt.code; mf->width = crop->width; The semantic patch is: // <smpl> // Change function parameter @@ identifier func; identifier cfg; @@ func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...) { <... - cfg + sd_state ...> } // Change function declaration parameter @@ identifier func; identifier cfg; type T; @@ T func(..., - struct v4l2_subdev_pad_config *cfg + struct v4l2_subdev_state *sd_state , ...); // Change function return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...) { ... } // Change function declaration return value @@ identifier func; @@ - struct v4l2_subdev_pad_config + struct v4l2_subdev_state *func(...); // Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it // inside a pad_state. @@ identifier func; identifier pad_cfg; @@ func(...) { ... struct v4l2_subdev_pad_config pad_cfg; + struct v4l2_subdev_state pad_state = { .pads = &pad_cfg }; <+... ( v4l2_subdev_call | sensor_call | isi_try_fse | isc_try_fse | saa_call_all ) (..., - &pad_cfg + &pad_state ,...) ...+> } // If the function uses fields from pad_config, access via state->pads @@ identifier func; identifier state; @@ func(..., struct v4l2_subdev_state *state , ...) { <... ( - state->try_fmt + state->pads->try_fmt | - state->try_crop + state->pads->try_crop | - state->try_compose + state->pads->try_compose ) ...> } // If the function accesses the filehandle, use fh->state instead @@ struct v4l2_subdev_fh *fh; @@ - fh->pad + fh->state @@ struct v4l2_subdev_fh fh; @@ - fh.pad + fh.state // Start of vsp1 specific @@ @@ struct vsp1_entity { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... }; @@ symbol entity; @@ vsp1_entity_init(...) { ... entity->config = - v4l2_subdev_alloc_pad_config + v4l2_subdev_alloc_state (&entity->subdev); ... } @@ symbol entity; @@ vsp1_entity_destroy(...) { ... - v4l2_subdev_free_pad_config + v4l2_subdev_free_state (entity->config); ... } @exists@ identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)"; symbol config; @@ func(...) { ... - struct v4l2_subdev_pad_config *config; + struct v4l2_subdev_state *config; ... } // End of vsp1 specific // Start of rcar specific @@ identifier sd; identifier pad_cfg; @@ rvin_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } // End of rcar specific // Start of rockchip specific @@ identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)"; symbol rsz; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = rsz->pad_cfg }; ... - rsz->pad_cfg + &state ... } @@ identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)"; symbol isp; symbol pad_cfg; @@ func(...) { + struct v4l2_subdev_state state = { .pads = isp->pad_cfg }; ... - isp->pad_cfg + &state ... } @@ symbol rkisp1; symbol isp; symbol pad_cfg; @@ rkisp1_isp_register(...) { + struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg }; ... - rkisp1->isp.pad_cfg + &state ... } // End of rockchip specific // Start of tegra-video specific @@ identifier sd; identifier pad_cfg; @@ __tegra_channel_try_format(...) { ... - struct v4l2_subdev_pad_config *pad_cfg; + struct v4l2_subdev_state *sd_state; ... - pad_cfg = v4l2_subdev_alloc_pad_config(sd); + sd_state = v4l2_subdev_alloc_state(sd); <... - pad_cfg + sd_state ...> - v4l2_subdev_free_pad_config(pad_cfg); + v4l2_subdev_free_state(sd_state); ... } @@ identifier sd_state; @@ __tegra_channel_try_format(...) { ... struct v4l2_subdev_state *sd_state; <... - sd_state->try_crop + sd_state->pads->try_crop ...> } // End of tegra-video specific // </smpl> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-10media: exynos4-is: fix pm_runtime_get_sync() usage countMauro Carvalho Chehab
The pm_runtime_get_sync() internally increments the dev->power.usage_count without decrementing it, even on errors. On some places, this is ok, but on others the usage count ended being unbalanced on failures. Replace it by the new pm_runtime_resume_and_get(), introduced by: commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") in order to properly decrement the usage counter, avoiding a potential PM usage counter leak. As a bonus, such function always return zero on success. So, some code can be simplified. Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: platform: exynos4-is: remove all references to physical addressesMarek Szyprowski
This driver always operates on the DMA/IOVA addresses, so calling them physical addresses is misleading, although when no IOMMU is used they equal each other. Fix this by renaming all such entries to 'addr' and adjusting comments. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-27media: exynos4-is: Fix several reference count leaks due to pm_runtime_get_syncQiushi Wu
On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the reference count before returning the error. Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-04media: use v4l2_rect_enclosed helperBenoit Parrot
Several drivers implement the same enclosed_rectangle() function to check if a rectangle is enclosed into another. Replace this with the newly added v4l2_rect_enclosed() helper function. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com> Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-02-24media: media/platform: rename VFL_TYPE_GRABBER to _VIDEOHans Verkuil
'GRABBER' is a weird name, all other types map to the /dev device names. Rename to 'VIDEO' to be consistent with the other types. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-02-24media: exynos4-is: add missed clk_disable_unprepare in removeChuhong Yuan
This driver forgets to disable and unprepare clock when remove. Add a call to clk_disable_unprepare() to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2019-07-22media: media/platform: don't set description in ENUM_FMTHans Verkuil
The V4L2 core sets the format description and flags for the driver in order to ensure consistent naming. So drop the strscpy of the description in drivers. Also remove any description strings in driver-internal structures since those are no longer needed. And in am437x-vpfe.c drop an unnecessary f->type assignment in vpfe_enum_fmt(). Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Benoit Parrot <bparrot@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [hverkuil-cisco@xs4all.nl: addressed some small suggestions from Laurent] Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-09Merge tag 'media/v5.3-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new Atmel microship ISC driver - coda has gained support for mpeg2 and mpeg4 - cxusb gained support for analog TV - rockchip staging driver was split into two separate staging drivers - added a new staging driver for Allegro DVT video IP core - added a new staging driver for Amlogic Meson video decoder - lots of improvements and cleanups * tag 'media/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (398 commits) media: allegro: use new v4l2_m2m_ioctl_try_encoder_cmd funcs media: doc-rst: Fix typos media: radio-raremono: change devm_k*alloc to k*alloc media: stv0297: fix frequency range limit media: rc: Prefer KEY_NUMERIC_* for number buttons on remotes media: dvb_frontend: split dvb_frontend_handle_ioctl function media: mceusb: disable "nonsensical irdata" messages media: rc: remove redundant dev_err message media: cec-notifier: add new notifier functions media: cec: add struct cec_connector_info support media: cec-notifier: rename variables, check kstrdup and n->conn_name media: MAINTAINERS: Add maintainers for Media Controller media: staging: media: tegra-vde: Defer dmabuf's unmapping media: staging: media: tegra-vde: Add IOMMU support media: hdpvr: fix locking and a missing msleep media: v4l2: Test type instead of cfg->type in v4l2_ctrl_new_custom() media: atmel: atmel-isc: fix i386 build error media: v4l2-ctrl: Move compound control initialization media: hantro: Use vb2_get_buffer media: pci: cx88: Change the type of 'missed' to u64 ...
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05media: v4l2: Get rid of ->vidioc_enum_fmt_vid_{cap, out}_mplaneBoris Brezillon
Support for multiplanar and singleplanar formats is mutually exclusive, at least in practice. In our attempt to unify support for support for mplane and !mplane in v4l, let's get rid of the ->vidioc_enum_fmt_{vid,out}_cap_mplane() hooks and call ->vidioc_enum_fmt_{vid,out}_cap() instead. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> [hverkuil-cisco@xs4all.nl: fix typos: pirv -> priv and prov -> priv] Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-05media: v4l2: Make sure all drivers set _MPLANE caps in vdev->device_capsBoris Brezillon
This is needed if we want the core to be able to check _MPLANE support without having to call the ->vidioc_querycap() hook. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11media: use strscpy() instead of strlcpy()Mauro Carvalho Chehab
The implementation of strscpy() is more robust and safer. That's now the recommended way to copy NUL terminated strings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2017-12-18media: exynos4-is: Remove dependency on obsolete SoC supportMarek Szyprowski
Support for Exynos4212 SoCs has been removed by commit bca9085e0ae9 ("ARM: dts: exynos: remove Exynos4212 support (dead code)"), so there is no need to keep remaining dead code related to this SoC version. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08media: exynos4-is: Use PTR_ERR_OR_ZERO()Vasyl Gomonovych
Fix ptr_ret.cocci warnings: drivers/media/platform/exynos4-is/fimc-lite.c:1465:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: Convert to using %pOF instead of full_nameRob Herring
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Songjun Wu <songjun.wu@microchip.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Javier Martinez Canillas <javier@osg.samsung.com> Cc: Minghsiu Tsai <minghsiu.tsai@mediatek.com> Cc: Houlong Wei <houlong.wei@mediatek.com> Cc: Andrew-CT Chen <andrew-ct.chen@mediatek.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Hyun Kwon <hyun.kwon@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: exynos4-is: constify video_subdev structuresJulia Lawall
The v4l2_subdev_ops structures are only passed as the second argument of v4l2_subdev_init, which is const, so the v4l2_subdev_ops structures can be const as well. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-23[media] v4l2-ioctl/exynos: fix G/S_SELECTION's type handlingHans Verkuil
The type field in struct v4l2_selection is supposed to never use the _MPLANE variants. E.g. if the driver supports V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE, then userspace should still pass V4L2_BUF_TYPE_VIDEO_CAPTURE. The reasons for this are lost in the mists of time, but it is really annoying. In addition, the exynos drivers didn't follow this rule and instead expected the _MPLANE type. To fix that code is added to the v4l2 core that maps the _MPLANE buffer types to their regular equivalents before calling the driver. Effectively this allows for userspace to use either _MPLANE or the regular buffer type. This keeps backwards compatibility while making things easier for userspace. Since drivers now never see the _MPLANE buffer types the exynos drivers had to be adapted as well. Signed-off-by: Hans Verkuil <hansverk@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-01-27[media] media: Rename graph and pipeline structs and functionsSakari Ailus
The media_entity_pipeline_start() and media_entity_pipeline_stop() functions are renamed as media_pipeline_start() and media_pipeline_stop(), respectively. The reason is two-fold: the pipeline struct is, rightly, already called media_pipeline (rather than media_entity_pipeline) and what this really is about is a pipeline. A pipeline consists of entities --- and, well, other objects embedded in these entities. As the pipeline object will be in the future moved from entities to pads in order to support multiple pipelines through a single entity, do the renaming now. Similarly, functions operating on struct media_entity_graph as well as the struct itself are renamed by dropping the "entity_" part from the prefix of the function family and the data structure. The graph traversal which is what the functions are about is not specifically about entities only and will operate on pads for the same reason as the media pipeline. The patch has been generated using the following command: git grep -l media_entity |xargs perl -i -pe ' s/media_entity_pipeline/media_pipeline/g; s/media_entity_graph/media_graph/g' And a few manual edits related to line start alignment and line wrapping. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-22[media] exynos4-is: Add missing entity function initializationSylwester Nawrocki
Suppresses following warnings: s5p-fimc-md camera: Entity type for entity FIMC.0 was not initialized! s5p-fimc-md camera: Entity type for entity FIMC.1 was not initialized! s5p-fimc-md camera: Entity type for entity s5p-mipi-csis.0 was not initialized! s5p-fimc-md camera: Entity type for entity s5p-mipi-csis.1 was not initialized! s5p-fimc-md camera: Entity type for entity FIMC-LITE.0 was not initialized! s5p-fimc-md camera: Entity type for entity FIMC-LITE.1 was not initialized! s5p-fimc-md camera: Entity type for entity FIMC-IS-ISP was not initialized! Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-22[media] exynos4-is: Improve clock managementMarek Szyprowski
There is no need to keep all clocks prepared all the time. Call to clk_prepare/unprepare can be done on demand from runtime pm callbacks (it is allowed to call sleeping functions from that context). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08[media] vb2: replace void *alloc_ctxs by struct device *alloc_devsHans Verkuil
Make this a proper typed array. Drop the old allocate context code since that is no longer used. Note that the memops functions now get a struct device pointer instead of the struct device ** that was there initially (actually a void pointer to a struct containing only a struct device pointer). This code is now a lot cleaner. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08[media] media/platform: convert drivers to use the new vb2_queue dev fieldHans Verkuil
Stop using alloc_ctx and just fill in the device pointer. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-03media: set proper max seg size for devices on Exynos SoCsMarek Szyprowski
All multimedia devices found on Exynos SoCs support only contiguous buffers, so set DMA max segment size to DMA_BIT_MASK(32) to let memory allocator to correctly create contiguous memory mappings. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2016-03-05[media] v4l: exynos4-is: Drop unneeded check when setting up fimc-lite linksLaurent Pinchart
The driver verifies that the type of the remote entity matches its expectations when setting up fimc-lite links and returns an error if it doesn't. Those checks can never fail as the links are created by the driver in a way that always match its expectations (the SINK and SOURCE_ISP pads are connected to subdevs only and the SOURCE_DMA pad is connected to a video node only). Remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-11[media] media framework: rename pads init function to media_entity_pads_init()Mauro Carvalho Chehab
With the MC next gen rework, what's left for media_entity_init() is to just initialize the PADs. However, certain devices, like a FLASH led/light doesn't have any input or output PAD. So, there's no reason why calling media_entity_init() would be mandatory. Also, despite its name, what this function actually does is to initialize the PADs data. So, rename it to media_entity_pads_init() in order to reflect that. The media entity actual init happens during entity register, at media_device_register_entity(). We should move init of num_links and num_backlinks to it. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-11[media] media: use macros to check for V4L2 subdev entitiesMauro Carvalho Chehab
Instead of relying on media subtype, use the new macros to detect if an entity is a subdev or an A/V DMA entity. Please note that most drivers assume that there's just AV_DMA or V4L2 subdevs. This is not true anymore, as we've added MC support for DVB, and there are plans to add support for ALSA and FB/DRM too. Ok, on the current pipelines supported by those drivers, just V4L stuff are there, but, assuming that some day a pipeline that also works with other subsystems will ever added, it is better to add explicit checks for the AV_DMA stuff. Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-11[media] media: use entity.graph_obj.mdev instead of .parentJavier Martinez Canillas
The struct media_entity has a .parent field that stores a pointer to the parent struct media_device. But recently a media_gobj was embedded into the entities and since struct media_gojb already has a pointer to a struct media_device in the .mdev field, the .parent field becomes redundant and can be removed. This patch replaces all the usage of .parent by .graph_obj.mdev so that field will become unused and can be removed on a later patch. No functional changes. The transformation was made using the following coccinelle spatch: @@ struct media_entity *me; @@ - me->parent + me->graph_obj.mdev @@ struct media_entity *link; @@ - link->source->entity->parent + link->source->entity->graph_obj.mdev @@ struct exynos_video_entity *ve; @@ - ve->vdev.entity.parent + ve->vdev.entity.graph_obj.mdev Suggested-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-11[media] media: get rid of unused "extra_links" param on media_entity_init()Mauro Carvalho Chehab
Currently, media_entity_init() creates an array with the links, allocated at init time. It provides a parameter (extra_links) that would allocate more links than the current needs, but this is not used by any driver. As we want to be able to do dynamic link allocation/removal, we'll need to change the implementation of the links. So, before doing that, let's first remove that extra unused parameter, in order to cleanup the interface first. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-12-18[media] media: videobuf2: Move timestamp to vb2_bufferJunghak Sung
Move timestamp from struct vb2_v4l2_buffer to struct vb2_buffer for common use, and change its type to u64 in order to handling y2038 problem. This patch also includes all device drivers' changes related to this restructuring. Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-12-18[media] vb2: drop v4l2_format argument from queue_setupHans Verkuil
The queue_setup callback has a void pointer that is just for V4L2 and is the pointer to the v4l2_format struct that was passed to VIDIOC_CREATE_BUFS. The idea was that drivers would use the information from that struct to buffers suitable for the requested format. After the vb2 split series this pointer is now a void pointer, which is ugly, and the reality is that all existing drivers will effectively just look at the sizeimage field of v4l2_format. To make this more generic the queue_setup callback is changed: the void pointer is dropped, instead if the *num_planes argument is 0, then use the current format size, if it is non-zero, then it contains the number of requested planes and the sizes array contains the requested sizes. If either is unsupported, then return -EINVAL, otherwise use the requested size(s). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-17[media] include/media: move driver interface headers to a separate dirMauro Carvalho Chehab
Let's not mix headers used by the core with those headers that are needed by some driver-specific interface header. The headers used on drivers were manually moved using: mkdir include/media/drv-intf/ git mv include/media/cx2341x.h include/media/cx25840.h \ include/media/exynos-fimc.h include/media/msp3400.h \ include/media/s3c_camif.h include/media/saa7146.h \ include/media/saa7146_vv.h include/media/sh_mobile_ceu.h \ include/media/sh_mobile_csi2.h include/media/sh_vou.h \ include/media/si476x.h include/media/soc_mediabus.h \ include/media/tea575x.h include/media/drv-intf/ And the references for those headers were corrected using: MAIN_DIR="media/" PREV_DIR="media/" DIRS="drv-intf/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-10-20[media] media: videobuf2: Change queue_setup argumentJunghak Sung
Replace struct v4l2_format * with void * to make queue_setup() for common use. And then, modify all device drivers related with this change. Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: fix missing const in fimc-lite.c] Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-01[media] media: videobuf2: Restructure vb2_bufferJunghak Sung
Remove v4l2 stuff - v4l2_buf, v4l2_plane - from struct vb2_buffer. Add new member variables - bytesused, length, offset, userptr, fd, data_offset - to struct vb2_plane in order to cover all information of v4l2_plane. struct vb2_plane { <snip> unsigned int bytesused; unsigned int length; union { unsigned int offset; unsigned long userptr; int fd; } m; unsigned int data_offset; } Replace v4l2_buf with new member variables - index, type, memory - which are common fields for buffer management. struct vb2_buffer { <snip> unsigned int index; unsigned int type; unsigned int memory; unsigned int num_planes; struct vb2_plane planes[VIDEO_MAX_PLANES]; <snip> }; v4l2 specific fields - flags, field, timestamp, timecode, sequence - are moved to vb2_v4l2_buffer in videobuf2-v4l2.c struct vb2_v4l2_buffer { struct vb2_buffer vb2_buf; __u32 flags; __u32 field; struct timeval timestamp; struct v4l2_timecode timecode; __u32 sequence; }; Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-01[media] media: videobuf2: Replace videobuf2-core with videobuf2-v4l2Junghak Sung
Make videobuf2-v4l2 as a wrapper of videobuf2-core for v4l2-use. And replace videobuf2-core.h with videobuf2-v4l2.h. This renaming change should be accompanied by the modifications of all device drivers that include videobuf2-core.h. It can be done with just running this shell script. replace() { str1=$1 str2=$2 dir=$3 for file in $(find $dir -name *.h -o -name *.c -o -name Makefile) do echo $file sed "s/$str1/$str2/g" $file > $file.out mv $file.out $file done } replace "videobuf2-core" "videobuf2-v4l2" "include/media/" replace "videobuf2-core" "videobuf2-v4l2" "drivers/media/" replace "videobuf2-core" "videobuf2-v4l2" "drivers/usb/gadget/" replace "videobuf2-core" "videobuf2-v4l2" "drivers/staging/media/" Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-10-01[media] use v4l2_get_timestamp where possibleArnd Bergmann
This is a preparation for a change to the type of v4l2 timestamps. v4l2_get_timestamp() is a helper function that reads the monotonic time and stores it into a 'struct timeval'. Multiple drivers implement the same thing themselves for historic reasons. Changing them all to use v4l2_get_timestamp() is more consistent and reduces the amount of code duplication, and most importantly simplifies the following changes. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> [hans.verkuil@cisco.com: dropped the v4l2-dev.c patch that didn't belong here] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-23[media] v4l2-subdev: replace v4l2_subdev_fh by v4l2_subdev_pad_configHans Verkuil
If a subdevice pad op is called from a bridge driver, then there is no v4l2_subdev_fh struct that can be passed to the subdevice. This made it hard to use such subdevs from a bridge driver. This patch replaces the v4l2_subdev_fh pointer by a v4l2_subdev_pad_config pointer in the pad ops. This allows bridge drivers to use the various try_ pad ops by creating a v4l2_subdev_pad_config struct and passing it along to the pad op. The v4l2_subdev_get_try_* macros had to be changed because of this, so I also took the opportunity to use the full name of the v4l2_subdev_get_try_* functions in the __V4L2_SUBDEV_MK_GET_TRY macro arguments: if you now do 'git grep v4l2_subdev_get_try_format' you will actually find the header where it is defined. One remark regarding the drivers/staging/media/davinci_vpfe patches: the *_init_formats() functions assumed that fh could be NULL. However, that's not true for this driver, it's always set. This is almost certainly a copy and paste from the omap3isp driver. I've updated the code to reflect the fact that fh is never NULL. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-11Merge tag 'media/v3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Two new dvb frontend drivers: mn88472 and mn88473 - A new driver for some PCIe DVBSky cards - A new remote controller driver: meson-ir - One LIRC staging driver got rewritten and promoted to mainstream: igorplugusb - A new tuner driver (m88rs6000t) - The old omap2 media driver got removed from staging. This driver uses an old DMA API and it is likely broken on recent kernels. Nobody cared enough to fix it - Media bus format moved to a separate header, as DRM will also use the definitions there - mem2mem_testdev were renamed to vim2m, in order to use the same naming convention taken by the other virtual test driver (vivid) - Added a new driver for coda SoC (coda-jpeg) - The cx88 driver got converted to use videobuf2 core - Make DMABUF export buffer to work with DMA Scatter/Gather and Vmalloc cores - Lots of other fixes, improvements and cleanups on the drivers. * tag 'media/v3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (384 commits) [media] mn88473: One function call less in mn88473_init() after error [media] mn88473: Remove uneeded check before release_firmware() [media] lirc_zilog: Deletion of unnecessary checks before vfree() [media] MAINTAINERS: Add myself as img-ir maintainer [media] img-ir: Don't set driver's module owner [media] img-ir: Depend on METAG or MIPS or COMPILE_TEST [media] img-ir/hw: Drop [un]register_decoder declarations [media] img-ir/hw: Fix potential deadlock stopping timer [media] img-ir/hw: Always read data to clear buffer [media] redrat3: ensure dma is setup properly [media] ddbridge: remove unneeded check before dvb_unregister_device() [media] si2157: One function call less in si2157_init() after error [media] tuners: remove uneeded checks before release_firmware() [media] arm: omap2: rx51-peripherals: fix build warning [media] stv090x: add an extra protetion against buffer overflow [media] stv090x: Remove an unreachable code [media] stv090x: Some whitespace cleanups [media] em28xx: checkpatch cleanup: whitespaces/new lines cleanups [media] si2168: add support for firmware files in new format [media] si2168: debug printout for firmware version ...
2014-12-05media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PMRafael J. Wysocki
After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. The alternative of CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME may be replaced with CONFIG_PM too. Make these changes everywhere under drivers/media/. Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Kamil Debski <k.debski@samsung.com> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-14[media] platform: Make use of media_bus_format enumBoris BREZILLON
In order to have subsytem agnostic media bus format definitions we've moved media bus definition to include/uapi/linux/media-bus-format.h and prefixed values with MEDIA_BUS_FMT instead of V4L2_MBUS_FMT. Reference new definitions in all platform drivers. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-20media: platform: exynos4-is: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-23[media] exynos4-is: Remove support for non-dt platformsSylwester Nawrocki
All platforms supported by this driver are going to get device tree support in this kernel release so remove code that would have been actually not used any more. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-23[media] vb2: stop_streaming should return voidHans Verkuil
The vb2 core ignores any return code from the stop_streaming op. And there really isn't anything it can do anyway in case of an error. So change the return type to void and update any drivers that implement it. The int return gave drivers the idea that this operation could actually fail, but that's really not the case. The pwc amd sdr-msi3101 drivers both had this construction: if (mutex_lock_interruptible(&s->v4l2_lock)) return -ERESTARTSYS; This has been updated to just call mutex_lock(). The stop_streaming op expects this to really stop streaming and I very much doubt this will work reliably if stop_streaming just returns without really stopping the DMA. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Pawel Osciak <pawel@osciak.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-11Merge tag 'v3.14-rc5' into patchworkMauro Carvalho Chehab
Linux 3.14-rc5 * tag 'v3.14-rc5': (1117 commits) Linux 3.14-rc5 drm/vmwgfx: avoid null pointer dereference at failure paths drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date. drm/vmwgfx: Remove some unused surface formats MAINTAINERS: add maintainer entry for Armada DRM driver arm64: Fix !CONFIG_SMP kernel build arm64: mm: Add double logical invert to pte accessors dm cache: fix truncation bug when mapping I/O to >2TB fast device perf tools: Fix strict alias issue for find_first_bit powerpc/powernv: Fix indirect XSCOM unmangling powerpc/powernv: Fix opal_xscom_{read,write} prototype powerpc/powernv: Refactor PHB diag-data dump powerpc/powernv: Dump PHB diag-data immediately powerpc: Increase stack redzone for 64-bit userspace to 512 bytes powerpc/ftrace: bugfix for test_24bit_addr powerpc/crashdump : Fix page frame number check in copy_oldmem_page powerpc/le: Ensure that the 'stop-self' RTAS token is handled correctly kvm, vmx: Really fix lazy FPU on nested guest perf tools: fix BFD detection on opensuse drm/radeon: enable speaker allocation setup on dce3.2 ...
2014-03-05[media] v4l: Rename vb2_queue.timestamp_type as timestamp_flagsSakari Ailus
The timestamp_type field used to contain only the timestamp type. Soon it will be used for timestamp source flags as well. Rename the field accordingly. [m.chehab@samsung.com: do the change also to drivers/staging/media and at s2255] Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-04[media] exynos4-is: Compile in fimc-lite runtime PM callbacks conditionallySylwester Nawrocki
Enclose the runtime PM helpers in #ifdef CONFIG_PM_RUNTIME/#endif to avoid following compile warning when CONFIG_PM_RUNTIME is disabled: CC drivers/media/platform/exynos4-is/fimc-lite.o drivers/media/platform/exynos4-is/fimc-lite.c:1591:12: warning: ‘fimc_lite_runtime_resume’ defined but not used [-Wunused-function] drivers/media/platform/exynos4-is/fimc-lite.c:1599:12: warning: ‘fimc_lite_runtime_suspend’ defined but not used [-Wunused-function] Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-04[media] exynos4-is: Fix error paths in probe() for !pm_runtime_enabled()Sylwester Nawrocki
Ensure clk_disable() is called on error paths only when clk_enable() was previously called. This fixes following build warning: .../media-git/drivers/media/platform/exynos4-is/fimc-lite.c: In function 'fimc_lite_probe': .../media-git/drivers/media/platform/exynos4-is/fimc-lite.c:1583:1: warning: label 'err_sd' defined but not used [-Wunused-label] Reported-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-01-02[media] exynos4-is: Enable FIMC-LITE clock if runtime PM is not usedSylwester Nawrocki
Ensure the device also works when runtime PM is disabled. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-09[media] videobuf2: Add missing lock held on vb2_fop_releaseRicardo Ribalda
vb2_fop_release does not hold the lock although it is modifying the queue->owner field. This could lead to race conditions on the vb2_perform_io function when multiple applications are accessing the video device via read/write API: [ 308.297741] BUG: unable to handle kernel NULL pointer dereference at 0000000000000260 [ 308.297759] IP: [<ffffffffa07a9fd2>] vb2_perform_fileio+0x372/0x610 [videobuf2_core] [ 308.297794] PGD 159719067 PUD 158119067 PMD 0 [ 308.297812] Oops: 0000 #1 SMP [ 308.297826] Modules linked in: qt5023_video videobuf2_dma_sg qtec_xform videobuf2_vmalloc videobuf2_memops videobuf2_core qtec_white qtec_mem gpio_xilinx qtec_cmosis qtec_pcie fglrx(PO) spi_xilinx spi_bitbang qt5023 [ 308.297888] CPU: 1 PID: 2189 Comm: java Tainted: P O 3.11.0-qtec-standard #1 [ 308.297919] Hardware name: QTechnology QT5022/QT5022, BIOS PM_2.1.0.309 X64 05/23/2013 [ 308.297952] task: ffff8801564e1690 ti: ffff88014dc02000 task.ti: ffff88014dc02000 [ 308.297962] RIP: 0010:[<ffffffffa07a9fd2>] [<ffffffffa07a9fd2>] vb2_perform_fileio+0x372/0x610 [videobuf2_core] [ 308.297985] RSP: 0018:ffff88014dc03df8 EFLAGS: 00010202 [ 308.297995] RAX: 0000000000000000 RBX: ffff880158a23000 RCX: dead000000100100 [ 308.298003] RDX: 0000000000000000 RSI: dead000000200200 RDI: 0000000000000000 [ 308.298012] RBP: ffff88014dc03e58 R08: 0000000000000000 R09: 0000000000000001 [ 308.298020] R10: ffffea00051e8380 R11: ffff88014dc03fd8 R12: ffff880158a23070 [ 308.298029] R13: ffff8801549040b8 R14: 0000000000198000 R15: 0000000001887e60 [ 308.298040] FS: 00007f65130d5700(0000) GS:ffff88015ed00000(0000) knlGS:0000000000000000 [ 308.298049] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 308.298057] CR2: 0000000000000260 CR3: 0000000159630000 CR4: 00000000000007e0 [ 308.298064] Stack: [ 308.298071] ffff880156416c00 0000000000198000 0000000000000000 ffff880100000001 [ 308.298087] ffff88014dc03f50 00000000810a79ca 0002000000000001 ffff880154904718 [ 308.298101] ffff880156416c00 0000000000198000 ffff880154904338 ffff88014dc03f50 [ 308.298116] Call Trace: [ 308.298143] [<ffffffffa07aa3c4>] vb2_read+0x14/0x20 [videobuf2_core] [ 308.298198] [<ffffffffa07aa494>] vb2_fop_read+0xc4/0x120 [videobuf2_core] [ 308.298252] [<ffffffff8154ee9e>] v4l2_read+0x7e/0xc0 [ 308.298296] [<ffffffff8116e639>] vfs_read+0xa9/0x160 [ 308.298312] [<ffffffff8116e882>] SyS_read+0x52/0xb0 [ 308.298328] [<ffffffff81784179>] tracesys+0xd0/0xd5 [ 308.298335] Code: e5 d6 ff ff 83 3d be 24 00 00 04 89 c2 4c 8b 45 b0 44 8b 4d b8 0f 8f 20 02 00 00 85 d2 75 32 83 83 78 03 00 00 01 4b 8b 44 c5 48 <8b> 88 60 02 00 00 85 c9 0f 84 b0 00 00 00 8b 40 58 89 c2 41 89 [ 308.298487] RIP [<ffffffffa07a9fd2>] vb2_perform_fileio+0x372/0x610 [videobuf2_core] [ 308.298507] RSP <ffff88014dc03df8> [ 308.298514] CR2: 0000000000000260 [ 308.298526] ---[ end trace e8f01717c96d1e41 ]--- Signed-off-by: Ricardo Ribalda <ricardo.ribalda@gmail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>