| Age | Commit message (Collapse) | Author |
|---|
|
Wedge the entire device, not just GT which may have triggered the wedge.
To implement this, cleanup the layering so xe_device_declare_wedged()
calls into the lower layers (GT) to ensure entire device is wedged.
While we are here, also signal any pending GT TLB invalidations upon
wedging device.
Lastly, short circuit reset wait if device is wedged.
v2:
- Short circuit reset wait if device is wedged (Local testing)
Fixes: 8ed9aaae39f3 ("drm/xe: Force wedged state and block GT reset upon any GPU hang")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240716063902.1390130-1-matthew.brost@intel.com
(cherry picked from commit 7dbe8af13c189f5937e87e9fb924d5bbc49e6f71)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
VF drivers can't modify WOPCM registers nor upload firmwares to
GuC, HuC or GSC. Modify xe_uc initialization functions to skip
those steps if running in the VF mode, or defer to a new custom
helper function that would not include those steps.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604212231.1416-3-michal.wajdeczko@intel.com
|
|
When running in execlist mode (using force_execlist=1 modparam)
we incorrectly select the error path in xe_uc_init(), leading to
an unwanted error message like this:
[ ] xe 0000:00:00.0: [drm] *ERROR* GT0: Failed to initialize uC (0000000000000000)
Fix that by doing early return like we do in other similar cases.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240521114857.712-1-michal.wajdeczko@intel.com
|
|
We shouldn't need anything from the GuC submission code until we
finish GuC initialization in post hwconfig step.
While around add diagnostic message if we fail uC init.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510203810.1952-3-michal.wajdeczko@intel.com
|
|
While xe_assert.h is now included and used by the xe_force_wake.h,
we want to stop include xe_force_wake.h from xe_device.h as it's
not needed there. Explicitly include xe_assert.h where needed.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240507110959.2747-2-michal.wajdeczko@intel.com
|
|
The function xe_guc_submit_stop consistently returns 0 without an error
state, prompting the caller to verify it, which is redundant.
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240424041911.2184868-1-himal.prasad.ghimiray@intel.com
|
|
xe_pm_init is the very last thing during the xe_pci_probe(),
hence these protections are useless from the point of view
of ensuring that the device is awake.
Let's remove it so we continue towards the goal of killing
xe_device_mem_access.
v2: Adding more cases
v3: Provide a separate fix for xe_tile_init_noalloc return (Matt)
Adding a new case where display HDCP init calls which
are also called at display probe time.
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417203952.25503-5-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
SR-IOV VF has limited access to MMIO registers. Fortunately, it is able
to access a curated subset that is needed to initialize the driver by
communicating with SR-IOV PF using GuC CT.
Initialize GuC earlier in order to keep the unified probe ordering
between VF and PF modes.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219130530.1406044-4-michal.winiarski@intel.com
|
|
Similar to GuC, we're using system memory for the initial stage, and
move the image to vram when it's available for subsequent loads (e.g.
after reset).
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219130530.1406044-2-michal.winiarski@intel.com
|
|
The GSC uC needs to communicate with the CSME to perform certain
operations. Since the GSC can't perform this communication directly on
platforms where it is integrated in GT, the graphics driver needs to
transfer the messages from GSC to CSME and back. The proxy flow must be
manually started after the GSC is loaded to signal to GSC that we're
ready to handle its messages and allow it to query its init data from
CSME.
Note that the component must be removed before the pci_remove call
completes, so we can't use a drmm helper for it and we need to instead
perform the cleanup as part of the removal flow.
v2: add function documentation, more targeted memory clear, clearer logs
and variable names (Alan)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240117182621.2653049-2-daniele.ceraolospurio@intel.com
|
|
The GFX doorbell solution provides a mechanism for submission of
workload to the graphics hardware by a ring3 application without
the penalty of ring transition for each workload submission.
This feature is not currently used by the Linux drivers, but in
SR-IOV mode the doorbells are treated as shared resource and the
PF driver must be able to provision exclusive range of doorbells
IDs across all enabled VFs.
Introduce simple GuC doorbell ID manager that will be used by the
PF driver for VFs provisioning and can later be used by submission
code once we are ready to switch from H2G based notifications to
doorbells mechanism.
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20231218190629.502-4-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
|
|
Starting on MTL, the HuC is authenticated twice, once via GuC (same as
with older integrated platforms) and once via GSC; the first
authentication allows the HuC to be used for clear-media workloads,
while the second one unlocks support for protected content.
Ahead of adding the authentication flow via GSC, this patch adds support
for differentiating the 2 auth steps and checking if they're complete.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Vivaik Balasubrawmanian <vivaik.balasubrawmanian@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Earlier GuC load will require more fine-grained control over reset.
Extract it outside of xe_uc_init_hw.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The GSC FW must be copied in a 4MB stolen memory allocation, whose GGTT
address is then passed as a parameter to a dedicated load instruction
submitted via the GSC engine.
Since the GSC load is relatively slow (up to 250ms), we perform it
asynchronously via a worker. This requires us to make sure that the
worker has stopped before suspending/unloading.
Note that we can't yet use xe_migrate_copy for the copy because it
doesn't work with stolen memory right now, so we do a memcpy from the
CPU side instead.
v2: add comment about timeout value, fix GSC status checking
before load (John)
Bspec: 65306, 65346
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Add the basic definitions and init function. Same as HuC, GSC is only
supported on the media GT on MTL and newer platforms.
Note that the GSC requires submission resources which can't be allocated
during init (because we don't have the hwconfig yet), so it can't be
marked as loadable at the end of the init function. The allocation of
those resources will come in the patch that makes use of them to load
the FW.
v2: better comment, move num FWs define inside the enum (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The current uC status tracking has a few issues:
1) the HuC is moved to "disabled" instead of "not supported"
2) the status is left uninitialized instead of "disabled" when the
modparam is used to disable support
3) due to #1, a number of checks are done against "disabled" instead of
the appropriate status.
Address all of those by making sure to follow the appropriate state
transition and checking against the required state.
v2: rebase on s/guc_submission_enabled/uc_enabled/
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The guc_submission_enabled() function is being used as a boolean toggle
for all firmwares and all related features, not just GuC submission. We
could add additional flags/functions to distinguish and allow different
use-cases (e.g. loading HuC but not using GuC submission), but given
that not using GuC is a debug-only scenario having a global switch for
all FWs is enough. However, we want to make it clear that this switch
turns off everything, so rename it to uc_enabled().
v2: rebase on s/XE_WARN_ON/xe_assert
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The XE_WARN_ON macro maps to WARN_ON which is not justified
in many cases where only a simple debug check is needed.
Replace the use of the XE_WARN_ON macro with the new xe_assert
macros which relies on drm_*. This takes a struct drm_device
argument, which is one of the main changes in this commit. The
other main change is that the condition is reversed, as with
XE_WARN_ON a message is displayed if the condition is true,
whereas with xe_assert it is if the condition is false.
v2:
- Rebase
- Keep WARN splats in xe_wopcm.c (Matt Roper)
v3:
- Rebase
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
On PVC unloading followed by reloading the module often results in a
completely dead machine (seems to be plaguing CI). Resetting the GuC
like we do at load seems to cure it at least when locally testing this.
v2:
- Move pc_fini into guc_fini. We want to do the GuC reset just after
calling pc_fini, otherwise we encounter communication failures. It
also seems like a good idea to do the reset before we start releasing
the various other GuC resources. In the case of pc_fini there is an
explicit stop, but for other stuff like logs, ads, ctb there is not.
References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/542
References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/597
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently GuCRC is disabled in suspend path for xe.
Rc6 is a prerequiste to enable s0ix and
should not be disabled for s2idle. There is no requirement
to disable GuCRC for S3+.
Remove it from xe_guc_pc_stop, thus removing from suspend path.
Retain the call in other places where xe_guc_pc_stop is
called.
v2: add description and return statement to kernel-doc (Rodrigo)
v3: update commit message (Rodrigo)
v4: add mem_access_get to the gucrc disable function
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Remove all existing style issues of type CODE_INDENT reported
by checkpatch.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
In general, this is due to FW load failure, should just report
error and fail the probe so that user can easily retry again.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Bruce Chang <yu.bruce.chang@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Sort includes and split them in blocks:
1) .h corresponding to the .c. Example: xe_bb.c should have a "#include
"xe_bb.h" first.
2) #include <linux/...>
3) #include <drm/...>
4) local includes
5) i915 includes
This is accomplished by running
`clang-format --style=file -i --sort-includes drivers/gpu/drm/xe/*.[ch]`
and ignoring all the changes after the includes. There are also some
manual tweaks to split the blocks.
v2: Also sort includes in headers
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Only the GuC should be issuing TLB invalidations if it is enabled. Part
of this patch is sanitize the device on driver unload to ensure we do
not send GuC based TLB invalidations during driver unload.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
|
|
Xe, is a new driver for Intel GPUs that supports both integrated and
discrete platforms starting with Tiger Lake (first Intel Xe Architecture).
The code is at a stage where it is already functional and has experimental
support for multiple platforms starting from Tiger Lake, with initial
support implemented in Mesa (for Iris and Anv, our OpenGL and Vulkan
drivers), as well as in NEO (for OpenCL and Level0).
The new Xe driver leverages a lot from i915.
As for display, the intent is to share the display code with the i915
driver so that there is maximum reuse there. But it is not added
in this patch.
This initial work is a collaboration of many people and unfortunately
the big squashed patch won't fully honor the proper credits. But let's
get some git quick stats so we can at least try to preserve some of the
credits:
Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Co-developed-by: Matthew Auld <matthew.auld@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Co-developed-by: Francois Dugast <francois.dugast@intel.com>
Co-developed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Co-developed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Co-developed-by: Philippe Lecluse <philippe.lecluse@intel.com>
Co-developed-by: Nirmoy Das <nirmoy.das@intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Co-developed-by: José Roberto de Souza <jose.souza@intel.com>
Co-developed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Co-developed-by: Dave Airlie <airlied@redhat.com>
Co-developed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Co-developed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Co-developed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
