summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
AgeCommit message (Collapse)Author
2024-01-18drm: remove I2C_CLASS_DDC supportHeiner Kallweit
After removal of the legacy EEPROM driver and I2C_CLASS_DDC support in olpc_dcon there's no i2c client driver left supporting I2C_CLASS_DDC. Class-based device auto-detection is a legacy mechanism and shouldn't be used in new code. So we can remove this class completely now. Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-09-06drm/bridge: Drop CONFIG_OF conditionals around of_node pointersBiju Das
Having conditional around the of_node pointers turns out to make driver code use ugly #ifdef and #if blocks. So drop the conditionals. Suggested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230831080938.47454-4-biju.das.jz@bp.renesas.com
2023-08-04drm: bridge: dw_hdmi: Fix ELD is not updated issueSandor Yu
The ELD (EDID-Like Data) is not updated when the HDMI cable is plugged into different HDMI monitors. This is because the EDID is not updated in the HDMI HPD function. As a result, the ELD data remains unchanged and may not reflect the capabilities of the newly connected HDMI sink device. To address this issue, the handle_plugged_change function should move to the bridge_atomic_enable and bridge_atomic_disable functions. Make sure the EDID is properly updated before updating ELD. Signed-off-by: Sandor Yu <Sandor.yu@nxp.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230804061145.2824843-1-Sandor.yu@nxp.com
2023-07-24Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging to get v6.5-rc2. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2023-07-21drm: Explicitly include correct DT includesRob Herring
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Steven Price <steven.price@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Acked-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230714174545.4056287-1-robh@kernel.org
2023-07-17Merge tag 'drm-misc-next-2023-07-13' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.6: UAPI Changes: * fbdev: * Make fbdev userspace interfaces optional; only leaves the framebuffer console active * prime: * Support dma-buf self-import for all drivers automatically: improves support for many userspace compositors Cross-subsystem Changes: * backlight: * Fix interaction with fbdev in several drivers * base: Convert struct platform.remove to return void; part of a larger, tree-wide effort * dma-buf: Acquire reservation lock for mmap() in exporters; part of an on-going effort to simplify locking around dma-bufs * fbdev: * Use Linux device instead of fbdev device in many places * Use deferred-I/O helper macros in various drivers * i2c: Convert struct i2c from .probe_new to .probe; part of a larger, tree-wide effort * video: * Avoid including <linux/screen_info.h> Core Changes: * atomic: * Improve logging * prime: * Remove struct drm_driver.gem_prime_mmap plus driver updates: all drivers now implement this callback with drm_gem_prime_mmap() * gem: * Support execution contexts: provides locking over multiple GEM objects * ttm: * Support init_on_free * Swapout fixes Driver Changes: * accel: * ivpu: MMU updates; Support debugfs * ast: * Improve device-model detection * Cleanups * bridge: * dw-hdmi: Improve support for YUV420 bus format * dw-mipi-dsi: Fix enable/disable of DSI controller * lt9611uxc: Use MODULE_FIRMWARE() * ps8640: Remove broken EDID code * samsung-dsim: Fix command transfer * tc358764: Handle HS/VS polarity; Use BIT() macro; Various cleanups * Cleanups * ingenic: * Kconfig REGMAP fixes * loongson: * Support display controller * mgag200: * Minor fixes * mxsfb: * Support disabling overlay planes * nouveau: * Improve VRAM detection * Various fixes and cleanups * panel: * panel-edp: Support AUO B116XAB01.4 * Support Visionox R66451 plus DT bindings * Cleanups * ssd130x: * Support per-controller default resolution plus DT bindings * Reduce memory-allocation overhead * Cleanups * tidss: * Support TI AM625 plus DT bindings * Implement new connector model plus driver updates * vkms * Improve write-back support * Documentation fixes Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230713090830.GA23281@linux-uq9g
2023-07-11Merge v6.5-rc1 into drm-misc-fixesMaxime Ripard
Boris needs 6.5-rc1 in drm-misc-fixes to prevent a conflict. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-06-27drm/bridge: dw-hdmi: remove dead code and fix indentationAdrián Larumbe
The hdmi_datamap enum is no longer in use. Also reindent enable_audio's call params. Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/ca42985814e9be33b7f8e3a33cea9e18505299e3.1687702042.git.adrian.larumbe@collabora.com
2023-06-27drm/bridge: dw-hdmi: truly enforce 420-only formats when drm mode demands itAdrián Larumbe
The current output bus format selection logic is enforcing YUV420 even when the drm mode allows for other bus formats as well. Fix it by adding check for 420-only drm modes. Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/6e6a217c180584a67ed7992c785764ba54af9151.1687702042.git.adrian.larumbe@collabora.com
2023-06-27drm/bridge: dw-hdmi: change YUV420 selection logic at clock setupAdrián Larumbe
Right now clocking value selection code is prioritising RGB, YUV444 modes over YUV420 for HDMI2 sinks. However, because of the bus format selection procedure in dw-hdmi, for HDMI2 sinks YUV420 is the format that will always be picked during the drm bridge chain check stage. Later on dw_hdmi_setup will configure a colour space based on the bus format that doesn't match the pixel value we had calculated as described above. Fix it by bringing back dw-hdmi bus format check when picking the right pixel clock. Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/6230bfae2cd97cf6527fc62ba5c850464919ccf8.1687702042.git.adrian.larumbe@collabora.com
2023-06-22drm: bridge: dw_hdmi: fix connector access for scdcAdrián Larumbe
Commit 5d844091f237 ("drm/scdc-helper: Pimp SCDC debugs") changed the scdc interface to pick up an i2c adapter from a connector instead. However, in the case of dw-hdmi, the wrong connector was being used to pass i2c adapter information, since dw-hdmi's embedded connector structure is only populated when the bridge attachment callback explicitly asks for it. drm-meson is handling connector creation, so this won't happen, leading to a NULL pointer dereference. Fix it by having scdc functions access dw-hdmi's current connector pointer instead, which is assigned during the bridge enablement stage. Fixes: 5d844091f237 ("drm/scdc-helper: Pimp SCDC debugs") Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com> Reported-by: Lukas F. Hartmann <lukas@mntre.com> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> [narmstrong: moved Fixes tag before first S-o-b and added Reported-by tag] Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230601123153.196867-1-adrian.larumbe@collabora.com
2023-05-23drm/bridge: dw-hdmi: Replace all non-returning strlcpy with strscpyAzeem Shaikh
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). No return values were used, so direct replacement is safe. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Robert Foss <rfoss@kernel.org> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230522155210.2336690-1-azeemshaikh38@gmail.com
2023-04-06drm/scdc-helper: Pimp SCDC debugsVille Syrjälä
Include the device and connector information in the SCDC debugs. Makes it easier to figure out who did what. v2: Rely on connector->ddc (Maxime) Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Robert Foss <rfoss@kernel.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Emma Anholt <emma@anholt.net> Cc: Maxime Ripard <mripard@kernel.org> Cc: intel-gfx@lists.freedesktop.org Cc: linux-tegra@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230403223652.18848-1-ville.syrjala@linux.intel.com Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Acked-by: Thierry Reding <treding@nvidia.com>
2022-12-01drm: bridge: dw_hdmi: fix preference of RGB modes over YUV420Guillaume BRUN
Cheap monitors sometimes advertise YUV modes they don't really have (HDMI specification mandates YUV support so even monitors without actual support will often wrongfully advertise it) which results in YUV matches and user forum complaints of a red tint to light colour display areas in common desktop environments. Moving the default RGB fall-back before YUV selection results in RGB mode matching in most cases, reducing complaints. Fixes: 6c3c719936da ("drm/bridge: synopsys: dw-hdmi: add bus format negociation") Signed-off-by: Guillaume BRUN <the.cheaterman@gmail.com> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221116143523.2126-1-the.cheaterman@gmail.com
2022-08-29drm: bridge: dw_hdmi: only trigger hotplug event on link changeLucas Stach
There are two events that signal a real change of the link state: HPD going high means the sink is newly connected or wants the source to re-read the EDID, RX sense going low is a indication that the link has been disconnected. Ignore the other two events that also trigger interrupts, but don't need immediate attention: HPD going low does not necessarily mean the link has been lost and should not trigger a immediate read of the status. RX sense going high also does not require a detect cycle, as HPD going high is the right point in time to read the EDID. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> (v1) Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220826185733.3213248-1-l.stach@pengutronix.de
2022-07-05drm: Remove linux/i2c.h from drm_crtc.hVille Syrjälä
drm_crtc.h has no need for linux/i2c.h, so don't include it. Avoids useless rebuilds of the entire universe when touching linux/i2c.h. Quite a few placs do currently depend on linux/i2c.h without actually including it directly. All of those need to be fixed up. v2: imx and mcde need linux/io.h for readl()/etc. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220630195114.17407-5-ville.syrjala@linux.intel.com
2022-04-25drm/display: Move SCDC helpers into display-helper libraryThomas Zimmermann
SCDC is the Status and Control Data Channel for HDMI. Move the SCDC helpers into display/ and split the header into files for core and helpers. Update all affected drivers. No functional changes. To avoid the proliferation of Kconfig options, SCDC is part of DRM's support for HDMI. If necessary, a new option could make SCDC an independent feature. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-9-tzimmermann@suse.de
2022-04-25drm/display: Move HDMI helpers into display-helper moduleThomas Zimmermann
Move DRM's HMDI helpers into the display/ subdirectoy and add it to DRM's display helpers. Update all affected drivers. No functional changes. The HDMI helpers were implemented in the EDID and connector code, but are actually unrelated. With the move to the display-helper library, we can remove the dependency on drm_edid.{c,h} in some driver's HDMI source files. Several of the HDMI helpers remain in EDID code because both share parts of their implementation internally. With better refractoring of the EDID code, those HDMI helpers could be moved into the display-helper library as well. v3: * fix Kconfig dependencies (Javier) v2: * reduce HDMI helpers to avoid exporting functions (Jani) * fix include statements (Jani, Javier) * update Kconfig symbols Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-8-tzimmermann@suse.de
2022-04-19drm: bridge: dw_hdmi: Audio: Add General Parallel Audio (GPA) driverSandor Yu
General Parallel Audio (GPA) interface is one of the supported audio interface for synopsys HDMI module, which has verified for i.MX8MPlus platform. This is initial version for GPA. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Sandor Yu <Sandor.yu@nxp.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/f21ba3e8c4d9d028ac74c6f3c588ddbffe739399.1649989179.git.Sandor.yu@nxp.com
2022-04-19drm: bridge: dw_hdmi: add reset function for PHY GEN1Sandor Yu
PHY reset register(MC_PHYRSTZ) active high reset control for PHY GEN2, and active low reset control for PHY GEN1. Rename function dw_hdmi_phy_reset to dw_hdmi_phy_gen2_reset. Add dw_hdmi_phy_gen1_reset function for PHY GEN1. Signed-off-by: Sandor Yu <Sandor.yu@nxp.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/e0b3be2d63fe3e95246fb8b8b0dcd57415b29e04.1649989179.git.Sandor.yu@nxp.com
2022-04-19drm: bridge: dw_hdmi: Enable GCP only for Deep ColorSandor Yu
HDMI1.4b specification section 6.5.3: Source shall only send GCPs with non-zero CD to sinks that indicate support for Deep Color. DW HDMI GCP default enabled, but only transmit CD and do not handle AVMUTE, PP norDefault_Phase (yet). Disable Auto GCP when 24-bit color for sinks that not support Deep Color. Signed-off-by: Sandor Yu <Sandor.yu@nxp.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/78fa41e4fb3d3d53354034bc221fcf870dbac617.1649989179.git.Sandor.yu@nxp.com
2022-04-19drm: bridge: dw_hdmi: default enable workaround to clear the overflowSandor Yu
i.MX8MPlus (v2.13a) has verified need the workaround to clear the overflow with one iteration. Only i.MX6Q(v1.30a) need the workaround with 4 iterations, the others versions later than v1.3a have been identified as needing the workaround with a single iteration. Default enable the workaround with one iteration for all versions later than v1.30a. Signed-off-by: Sandor Yu <Sandor.yu@nxp.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/561951005a85574dcdd108e5d6a3a87df930ea3d.1649989179.git.Sandor.yu@nxp.com
2022-03-14drm/bridge: Use drm_mode_copy()Ville Syrjälä
struct drm_display_mode embeds a list head, so overwriting the full struct with another one will corrupt the list (if the destination mode is on a list). Use drm_mode_copy() instead which explicitly preserves the list head of the destination mode. Even if we know the destination mode is not on any list using drm_mode_copy() seems decent as it sets a good example. Bad examples of not using it might eventually get copied into code where preserving the list head actually matters. Obviously one case not covered here is when the mode itself is embedded in a larger structure and the whole structure is copied. But if we are careful when copying into modes embedded in structures I think we can be a little more reassured that bogus list heads haven't been propagated in. @is_mode_copy@ @@ drm_mode_copy(...) { ... } @depends on !is_mode_copy@ struct drm_display_mode *mode; expression E, S; @@ ( - *mode = E + drm_mode_copy(mode, &E) | - memcpy(mode, E, S) + drm_mode_copy(mode, E) ) @depends on !is_mode_copy@ struct drm_display_mode mode; expression E; @@ ( - mode = E + drm_mode_copy(&mode, &E) | - memcpy(&mode, E, S) + drm_mode_copy(&mode, E) ) @@ struct drm_display_mode *mode; @@ - &*mode + mode Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220218100403.7028-7-ville.syrjala@linux.intel.com Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-02-10drm/bridge: dw-hdmi: use safe format when first in bridge chainNeil Armstrong
When the dw-hdmi bridge is in first place of the bridge chain, this means there is no way to select an input format of the dw-hdmi HW component. Since introduction of display-connector, negotiation was broken since the dw-hdmi negotiation code only worked when the dw-hdmi bridge was in last position of the bridge chain or behind another bridge also supporting input & output format negotiation. Commit 7cd70656d128 ("drm/bridge: display-connector: implement bus fmts callbacks") was introduced to make negotiation work again by making display-connector act as a pass-through concerning input & output format negotiation. But in the case where the dw-hdmi is single in the bridge chain, for example on Renesas SoCs, with the display-connector bridge the dw-hdmi is no more single, breaking output format. Reported-by: Biju Das <biju.das.jz@bp.renesas.com> Bisected-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Fixes: 6c3c719936da ("drm/bridge: synopsys: dw-hdmi: add bus format negociation") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: add proper fixes commit] Reviewed-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220204143337.89221-1-narmstrong@baylibre.com
2022-01-25drm/connector: Fix typo in output formatMaxime Ripard
The HDMI specification mentions YCbCr everywhere, but our enums have YCrCb. Let's rename it to match. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-5-maxime@cerno.tech
2021-11-12drm/bridge: dw-hdmi: handle ELD when DRM_BRIDGE_ATTACH_NO_CONNECTORNeil Armstrong
The current ELD handling takes the internal connector ELD buffer and shares it to the I2S and AHB sub-driver. But with DRM_BRIDGE_ATTACH_NO_CONNECTOR, the connector is created elsewhere (or not), and an eventual connector is known only if the bridge chain up to a connector is enabled. The current dw-hdmi code gets the current connector from atomic_enable() so use the already stored connector pointer and replace the buffer pointer with a callback returning the current connector ELD buffer. Since a connector is not always available, either pass an empty ELD to the alsa HDMI driver or don't call snd_pcm_hw_constraint_eld() in AHB driver. Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: fixed typo in commit log] Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211029135947.3022875-1-narmstrong@baylibre.com
2021-10-15drm/bridge: synopsys: dw-hdmi: also allow interlace on bridgeNeil Armstrong
Since we allow interlace on the encoder, also allow it on the bridge so we can allow interlaced modes when using DRM_BRIDGE_ATTACH_NO_CONNECTOR. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211014152606.2289528-5-narmstrong@baylibre.com
2021-07-28drm: bridge: dw-hdmi: Attach to next bridge if availableLaurent Pinchart
On all platforms except i.MX and Rockchip, the dw-hdmi DT bindings require a video output port connected to an HDMI sink (most likely an HDMI connector, in rare cases another bridges converting HDMI to another protocol). For those platforms, retrieve the next bridge and attach it from the dw-hdmi bridge attach handler. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> # On V3U Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2021-07-28drm/bridge: Centralize error message when bridge attach failsLaurent Pinchart
Being informed of a failure to attach a bridge is useful, and many drivers prints an error message in that case. Move the message to drm_bridge_attach() to avoid code duplication. Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
2021-05-07drm/connector: Add helper to compare HDR metadataMaxime Ripard
All the drivers that support the HDR metadata property have a similar function to compare the metadata from one connector state to the next, and force a mode change if they differ. All these functions run pretty much the same code, so let's turn it into an helper that can be shared across those drivers. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210430094451.2145002-2-maxime@cerno.tech
2021-05-07drm/connector: Create a helper to attach the hdr_output_metadata propertyMaxime Ripard
All the drivers that implement HDR output call pretty much the same function to initialise the hdr_output_metadata property, and while the creation of that property is in a helper, every driver uses the same code to attach it. Provide a helper for it as well Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210430094451.2145002-1-maxime@cerno.tech
2021-04-20drm/bridge/synopsys: dw-hdmi: Add an option to suppress loading CEC driverJernej Skrabec
This adds DW-HDMI driver a glue option to disable loading of the CEC sub-driver. On some SoCs, the CEC functionality is enabled in the IP config bits, but the CEC bus is non-functional like on Amlogic SoCs, where the CEC config bit is set but the DW-HDMI CEC signal is not connected to a physical pin, leading to some confusion when the DW-HDMI CEC controller can't communicate on the bus. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210416092737.1971876-2-narmstrong@baylibre.com
2021-01-05drm: bridge: dw-hdmi: Remove redundant null check before clk_disable_unprepareXu Wang
Because clk_disable_unprepare() already checked NULL clock parameter, so the additional check is unnecessary, just remove them. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2020-11-12drm: bridge: dw-hdmi: Avoid resetting force in the detect functionJonathan Liu
It has been observed that resetting force in the detect function can result in the PHY being powered down in response to hot-plug detect being asserted, even when the HDMI connector is forced on. Enabling debug messages and adding a call to dump_stack() in dw_hdmi_phy_power_off() shows the following in dmesg: [ 160.637413] dwhdmi-rockchip ff940000.hdmi: EVENT=plugin [ 160.637433] dwhdmi-rockchip ff940000.hdmi: PHY powered down in 0 iterations Call trace: dw_hdmi_phy_power_off dw_hdmi_phy_disable dw_hdmi_update_power dw_hdmi_detect dw_hdmi_connector_detect drm_helper_probe_detect_ctx drm_helper_hpd_irq_event dw_hdmi_irq irq_thread_fn irq_thread kthread ret_from_fork Fixes: 381f05a7a842 ("drm: bridge/dw_hdmi: add connector mode forcing") Signed-off-by: Jonathan Liu <net147@gmail.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201031081747.372599-1-net147@gmail.com
2020-07-10drm/bridge: dw-hdmi: Always add the bridge in the global bridge listLiu Ying
It doesn't hurt to add the bridge in the global bridge list also for platform specific dw-hdmi drivers which are based on the component framework. This can be achieved by moving the drm_bridge_add() function call from dw_hdmi_probe() to __dw_hdmi_probe(). A counterpart movement for drm_bridge_remove() is also needed then. Moreover, since drm_bridge_add() initializes &bridge->hpd_mutex, this may help those platform specific dw-hdmi drivers(based on the component framework) avoid accessing the uninitialized mutex in drm_bridge_hpd_notify() which is called in dw_hdmi_irq(). Putting drm_bridge_add() in __dw_hdmi_probe() just before it returns successfully should bring no logic change for platforms based on the DRM bridge API, which is a good choice from safety point of view. Also, __dw_hdmi_probe() is renamed to dw_hdmi_probe() since dw_hdmi_probe() does nothing else but calling __dw_hdmi_probe(). Similar renaming applies to the __dw_hdmi_remove()/dw_hdmi_remove() pair. Fixes: ec971aaa6775 ("drm: bridge: dw-hdmi: Make connector creation optional") Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Cheng-Yi Chiang <cychiang@chromium.org> Cc: Dariusz Marcinkiewicz <darekm@google.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Jose Abreu <joabreu@synopsys.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: dri-devel@lists.freedesktop.org Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1594260156-8316-2-git-send-email-victor.liu@nxp.com
2020-07-10drm/bridge: dw-hdmi: Don't cleanup i2c adapter and ddc ptr in ↵Liu Ying
__dw_hdmi_probe() bailout path It's unnecessary to cleanup the i2c adapter and the ddc pointer in the bailout path of __dw_hdmi_probe(), since the adapter is not added and the ddc pointer is not set. Fixes: a23d6265f033 ("drm: bridge: dw-hdmi: Extract PHY interrupt setup to a function") Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Cheng-Yi Chiang <cychiang@chromium.org> Cc: Dariusz Marcinkiewicz <darekm@google.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Jose Abreu <joabreu@synopsys.com> Cc: dri-devel@lists.freedesktop.org Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1594260156-8316-1-git-send-email-victor.liu@nxp.com
2020-06-23drm: bridge: dw-hdmi: Make connector creation optionalLaurent Pinchart
Implement the drm_bridge_funcs .detect() and .get_edid() operations, and call drm_bridge_hpd_notify() notify to report HPD. This provides the necessary API to support disabling connector creation, do so by accepting DRM_BRIDGE_ATTACH_NO_CONNECTOR in dw_hdmi_bridge_attach(). Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-23-laurent.pinchart+renesas@ideasonboard.com
2020-06-23drm: bridge: dw-hdmi: Pass drm_connector to internal functions as neededLaurent Pinchart
To prepare for making connector creation optional in the driver, pass the drm_connector explicitly to the internal functions that require it. The functions that still access the connector from the dw_hdmi structure are dw_hdmi_connector_create() and __dw_hdmi_probe(). The former access is expected, as that's where the internal connector is created. The latter will be addressed separately. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-22-laurent.pinchart+renesas@ideasonboard.com
2020-06-23drm: bridge: dw-hdmi: Store current connector in struct dw_hdmiLaurent Pinchart
Store the connector that the bridge is currently wired to in the dw_hdmi structure. This is currently identical to the connector field, but will differ once the driver supports disabling connector creation. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-21-laurent.pinchart+renesas@ideasonboard.com
2020-06-23drm: bridge: dw-hdmi: Split connector creation to a separate functionLaurent Pinchart
Isolate all the code related to connector creation to a new dw_hdmi_connector_create() function, to prepare for making connector creation optional. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-20-laurent.pinchart+renesas@ideasonboard.com
2020-06-23drm: bridge: dw-hdmi: Pass drm_display_info to dw_hdmi_support_scdc()Laurent Pinchart
To prepare for making connector creation optional in the driver, pass the drm_display_info explicitly to dw_hdmi_support_scdc(). The pointer is passed to the callers where required, particularly to the dw_hdmi_phy_ops .init() function. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-19-laurent.pinchart+renesas@ideasonboard.com
2020-06-23drm: bridge: dw-hdmi: Constify mode argument to internal functionsLaurent Pinchart
Several internal functions take a drm_display_mode argument to configure the HDMI encoder or the HDMI PHY. They must not modify the mode, make the pointer const to enforce that. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-18-laurent.pinchart+renesas@ideasonboard.com
2020-06-23drm: bridge: dw-hdmi: Constify mode argument to dw_hdmi_phy_ops .init()Laurent Pinchart
The PHY .init() must not modify the mode it receives. Make the pointer const to enfore that. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-17-laurent.pinchart+renesas@ideasonboard.com
2020-06-23drm: bridge: dw-hdmi: Pass drm_display_info to .mode_valid()Laurent Pinchart
Replace the drm_connector pointer passed to the .mode_valid() function with a const drm_display_info pointer, as that's all the function should need. Use the display info passed to the bridge .mode_valid() operation instead of retrieving it from the connector, to prepare for make connector creation optional. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-16-laurent.pinchart+renesas@ideasonboard.com
2020-06-23drm: bridge: dw-hdmi: Remove unused field from dw_hdmi_plat_dataLaurent Pinchart
The input_bus_format field of struct dw_hdmi_plat_data is unused. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-14-laurent.pinchart+renesas@ideasonboard.com
2020-06-23drm: bridge: dw-hdmi: Pass private data pointer to .configure_phy()Laurent Pinchart
The .configure_phy() operation takes a dw_hdmi_plat_data pointer as a context argument. This differs from .mode_valid() that takes a custom private context pointer, causing possible confusion. Make the dw_hdmi_plat_data operations more consistent by passing the private context pointer to .configure_phy() as well. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-13-laurent.pinchart+renesas@ideasonboard.com
2020-06-23drm: bridge: dw-hdmi: Pass private data pointer to .mode_valid()Laurent Pinchart
Platform glue drivers for dw_hdmi may need to access device-specific data from their .mode_valid() implementation. They currently have no clean way to do so, and one driver hacks around it by accessing the dev_private data of the drm_device retrieved from the connector. Add a priv_data void pointer to the dw_hdmi_plat_data structure, and pass it to the .mode_valid() function. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-12-laurent.pinchart+renesas@ideasonboard.com
2020-06-23drm: bridge: Pass drm_display_info to drm_bridge_funcs .mode_valid()Laurent Pinchart
When validating a mode, bridges may need to do so in the context of a display, as specified by drm_display_info. An example is the meson dw-hdmi bridge that needs to consider the YUV 4:2:0 output format to perform clock calculations. Bridges that need the display info currently retrieve it from the drm_connector created by the bridge. This gets in the way of moving connector creation out of bridge drivers. To make this possible, pass the drm_display_info to drm_bridge_funcs .mode_valid(). Changes to the bridge drivers have been performed with the following coccinelle semantic patch and have been compile-tested. @ rule1 @ identifier funcs; identifier fn; @@ struct drm_bridge_funcs funcs = { ..., .mode_valid = fn }; @ depends on rule1 @ identifier rule1.fn; identifier bridge; identifier mode; @@ enum drm_mode_status fn( struct drm_bridge *bridge, + const struct drm_display_info *info, const struct drm_display_mode *mode ) { ... } Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Guido Günther <agx@sigxcpu.org> # for the nwl-dsi part: Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-11-laurent.pinchart+renesas@ideasonboard.com
2020-04-17Merge drm/drm-next into drm-misc-nextThomas Zimmermann
Backmerging required to pull topic/phy-compliance. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2020-03-31Merge v5.6 into drm-nextDave Airlie
msm needed rc6, so I just went and merged release (msm has been in drm-next outside of this tree) Signed-off-by: Dave Airlie <airlied@redhat.com>