summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/ast/ast_mode.c
AgeCommit message (Collapse)Author
2023-11-28drm/ast: Turn ioregs_lock to modeset_lockThomas Zimmermann
The lock for the I/O registers is only relevant during mode-setting operations. It protects the registers from concurrent access from reading EDID information. Reduce lock coverage to mode setting, rename the lock and move it entirely into the mode-setting code. No functional changes, as the I/O lock was never used for anything else than mode setting. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231116100240.22975-2-tzimmermann@suse.de
2023-11-21drm/ast: Disconnect BMC if physical connector is connectedThomas Zimmermann
Many user-space compositors fail with mode setting if a CRTC has more than one connected connector. This is the case with the BMC on Aspeed systems. Work around this problem by setting the BMC's connector status to disconnected when the physical connector has a display attached. This way compositors will only see one connected connector at a time; either the physical one or the BMC. Suggested-by: Jocelyn Falempe <jfalempe@redhat.com> Fixes: e329cb53b45d ("drm/ast: Add BMC virtual connector") Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: <stable@vger.kernel.org> # v6.6+ Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231116130217.22931-1-tzimmermann@suse.de
2023-10-19drm/ast: Rename AST_IO_MISC_PORT_READ to AST_IO_VGAMR_RThomas Zimmermann
Rename AST_IO_MISC_PORT_READ to AST_IO_VGAMR_R to align naming in the driver with documentation. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017083653.10063-12-tzimmermann@suse.de
2023-10-19drm/ast: Rename AST_IO_INPUT_STATUS1_READ to AST_IO_VGAIR1_RThomas Zimmermann
Rename AST_IO_INPUT_STATUS1_READ to AST_IO_VGAIR1_R to align naming in the driver with documentation. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017083653.10063-11-tzimmermann@suse.de
2023-10-19drm/ast: Rename AST_IO_CRTC_PORT to AST_IO_VGACRIThomas Zimmermann
Rename AST_IO_CRTC_PORT to AST_IO_VGACRI to align naming in the driver with documentation. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017083653.10063-10-tzimmermann@suse.de
2023-10-19drm/ast: Rename AST_IO_GR_PORT to AST_IO_VGAGRIThomas Zimmermann
Rename AST_IO_GR_PORT to AST_IO_VGAGRI to align naming in the driver with documentation. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017083653.10063-9-tzimmermann@suse.de
2023-10-19drm/ast: Rename AST_IO_DAC_DATA to AST_IO_VGAPDRThomas Zimmermann
Rename AST_IO_DAC_DATA to AST_IO_VGAPDR to align naming in the driver with documentation. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017083653.10063-8-tzimmermann@suse.de
2023-10-19drm/ast: Rename AST_IO_DAC_INDEX_WRITE to AST_IO_VGADWRThomas Zimmermann
Rename AST_IO_DAC_INDEX_WRITE to AST_IO_VGADWR to align naming in the driver with documentation. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017083653.10063-7-tzimmermann@suse.de
2023-10-19drm/ast: Rename AST_IO_SEQ_PORT to AST_IO_VGASRIThomas Zimmermann
Rename AST_IO_VGA_SEQ_PORT to AST_IO_VGASRI to align naming in the driver with documentation. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017083653.10063-5-tzimmermann@suse.de
2023-10-19drm/ast: Rename AST_IO_MISC_PORT_WRITE to AST_IO_VGAMR_WThomas Zimmermann
Rename AST_IO_MISC_PORT_WRITE to AST_IO_VGAMR_W to align naming in the driver with documentation. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017083653.10063-3-tzimmermann@suse.de
2023-10-19drm/ast: Rename AST_IO_AR_PORT_WRITE to AST_IO_VGAARI_WThomas Zimmermann
Rename AST_IO_AR_PORT_WRITE to AST_IO_VGAARI_W to align naming in the driver with documentation. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017083653.10063-2-tzimmermann@suse.de
2023-07-28drm/ast: report connection status on Display Port.Jocelyn Falempe
Aspeed always report the display port as "connected", because it doesn't set a .detect_ctx callback. Fix this by providing the proper detect callback for astdp and dp501. This also fixes the following regression: Since commit fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP") The default resolution is now 640x480 when no monitor is connected. But Aspeed graphics is mostly used in servers, where no monitor is attached. This also affects the remote BMC resolution to 640x480, which is inconvenient, and breaks the anaconda installer. v2: Add .detect callback to the dp/dp501 connector (Jani Nikula) v3: Use .detect_ctx callback, and refactors (Thomas Zimmermann) Add a BMC virtual connector v4: Better indent detect_ctx() functions (Thomas Zimmermann) v5: Enable polling of the dp and dp501 connector status (Thomas Zimmermann) v6: Change check order in ast_astdp_is_connected (Jammy Huang) Fixes: fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP") Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230713134316.332502-2-jfalempe@redhat.com
2023-07-28drm/ast: Add BMC virtual connectorJocelyn Falempe
Most aspeed devices have a BMC, which allows to remotely see the screen. Also in the common use case, those servers don't have a display connected. So add a Virtual connector, to reflect that even if no display is connected, the framebuffer can still be seen remotely. This prepares the work to implement a detect_ctx() for the Display port connector. v4: call drm_add_modes_noedid() with 4096x4096 (Thomas Zimmermann) remove useless struct field init to 0 (Thomas Zimmermann) don't use drm_simple_encoder_init() (Thomas Zimmermann) inline ast_bmc_connector_init() (Thomas Zimmermann) Fixes: fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP") Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230713134316.332502-1-jfalempe@redhat.com
2023-06-27drm/ast: Distinguish among chip generationsThomas Zimmermann
ASpeed distinguishes among various generations of the AST graphics chipset with various models. [1] The most-recent model AST 2600 is of the 7th generation, the AST 2500 is of the 6th generation, and so on. The ast driver simply picks one of the models as representative for the whole generation. In several places, individual models of the same generation need to be handled differently, which then requires additional code for detecting the model. Introduce different generations of the Aspeed chipset. In the source code, refer to the generation instead of the representation model where possible. The few places that require per-model handling are now clearly marked. In the enum ast_chip, we arrange each model's value such that it encodes the generation. This allows for an easy test. The actual values are ordered, but not of interest to the driver. v2: * use __ast_gen_is_eq() (Jingfeng) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://web.archive.org/web/20141007093258/http://www.aspeedtech.com/products.php?fPath=20 # 1 Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600 Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-10-tzimmermann@suse.de
2023-06-01drm/ast: Fix modeset failed on DisplayPortJammy Huang
If we switch display and update cursor together, it could lead to modeset failed because of concurrent access to IO registers. Add lock protection in DP's edid access to avoid this problem. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230601004847.1115-1-jammy_huang@aspeedtech.com
2023-03-14Merge tag 'drm-misc-next-2023-03-07' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.4-rc1: Note: Only changes since pull request from 2023-02-23 are included here. UAPI Changes: - Convert rockchip bindings to YAML. - Constify kobj_type structure in dma-buf. - FBDEV cmdline parser fixes, and other small fbdev fixes for mode parsing. Cross-subsystem Changes: - Add Neil Armstrong as linaro maintainer. - Actually signal the private stub dma-fence. Core Changes: - Add function for adding syncobj dep to sched_job and use it in panfrost, v3d. - Improve DisplayID 2.0 topology parsing and EDID parsing in general. - Add a gem eviction function and callback for generic GEM shrinker purposes. - Prepare to convert shmem helper to use the GEM reservation lock instead of own locking. (Actual commit itself got reverted for now) - Move the suballocator from radeon and amdgpu drivers to core in preparation for Xe. - Assorted small fixes and documentation. - Fixes to HPD polling. - Assorted small fixes in simpledrm, bridge, accel, shmem-helper, and the selftest of format-helper. - Remove dummy resource when ttm bo is created, and during pipelined gutting. Fix all drivers to accept a NULL ttm_bo->resource. - Handle pinned BO moving prevention in ttm core. - Set drm panel-bridge orientation before connector is registered. - Remove dumb_destroy callback. - Add documentation to GEM_CLOSE, PRIME_HANDLE_TO_FD, PRIME_FD_TO_HANDLE, GETFB2 ioctl's. - Add atomic enable_plane callback, use it in ast, mgag200, tidss. Driver Changes: - Use drm_gem_objects_lookup in vc4. - Assorted small fixes to virtio, ast, bridge/tc358762, meson, nouveau. - Allow virtio KMS to be disabled and compiled out. - Add Radxa 8/10HD, Samsung AMS495QA01 panels. - Fix ivpu compiler errors. - Assorted fixes to drm/panel, malidp, rockchip, ivpu, amdgpu, vgem, nouveau, vc4. - Assorted cleanups, simplifications and fixes to vmwgfx. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ac1f5186-54bb-02f4-ac56-907f5b76f3de@linux.intel.com
2023-03-01drm/ast: Rename to_ast_private() to to_ast_device()Thomas Zimmermann
The helper to_ast_private() now upcasts to struct ast_device. Rename it accordingly. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230221155745.27484-5-tzimmermann@suse.de
2023-03-01drm/ast: Rename struct ast_private to struct ast_deviceThomas Zimmermann
The data structure struct ast_private represents an AST device. Its name comes from the time when it was allocated and stored separately in struct drm_device.dev_private. The DRM device is now embedded, so rename struct ast_private to struct ast_device. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230221155745.27484-4-tzimmermann@suse.de
2023-02-22Merge tag 'drm-next-2023-02-23' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "There are a bunch of changes all over in the usual places. Highlights: - habanalabs moves from misc to accel - first accel driver for Intel VPU (Versatile Processing Unit) inference engine - dropped all the ancient legacy DRI1 drivers. I think it's been at least 10 years since anyone has heard about these. - Intel DG2 updates and prelim Meteorlake enablement - etnaviv adds support for Versilicon NPU device (a GPU like engine with inference accelerators) Detailed summary: Removals: - remove legacy dri1 drivers: i810, mga, r128, savage, sis, tdfx, via New driver: - intel VPU accelerator driver - habanalabs comes via drm tree now drm/core: - use drm_dbg_ helpers in several places - Document defaults for CRTC backgrounds - Document use of drm_minor edid: - improve mode parsing and refactoring connector: - support analog TV mode property media: - add some common formats udmabuf: - add vmap/vunmap methods fourcc: - add XRGB1555 and RGB565 formats - document open source user waiver firmware: - fix color-format selection for system framebuffer format-helper: - Add conversion from XRGB8888 to various sysfb formats - Make XRGB8888 the only driver-emulated legacy format - Add conversion from XRGB8888 to XBGR8888 and ABGR8888 fb-helper: - fix preferred depth and bpp values across drivers - Avoid blank consoles from selecting an incorrect color format probe-helper: - Enable/disable HPD on connectors scheduler: - Fix lockup in drm_sched_entity_kill() - Deprecate drm_sched_resubmit_jobs() bridge: - remove unused functions - implement i2c probe_new in various drivers - ite-it6505: Locking fixes, Cache EDID data - ite-it66121: Support IT6610 chip - lontium-tl9611: Fix HDMI on DragonBoard 845c - parade-ps8640: Use atomic bridge functions - Support i.MX93 LDB plus DT bindings debugfs: - add per device helpers and convert drivers displayport: - mst fixes - add DP adaptive sync DPCD definitions fbdev: - always pick 32bpp as default - remove some unused code simpledrm: - support system memory framebuffers panel: - add orientation quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50 - Use ktime_get_boottime() to measure power-down delay - Fix auto-suspend delay - Visionox VTDR6130 AMOLED DSI - Support Himax HX8394 - Convert many drivers to common generic DSI write-sequence helper - AUO A030JTN01 ttm: - drop bo wait wrapper - fix MIPS build habanalabs: - moved driver to accel subsystem - gaudi2 decoder error improvement - more trace events - Gaudi2 abrupt reset by firmware support - add uAPI to flush memory transactions - add uAPI to pass through userspace reqs to fw - remove dma-buf export by handle amdgpu: - add new INFO queries for peak and min sclk/mclk for profile modes - Add PCIe info to the INFO IOCTL - secure display support for multiple displays - DML optimizations - DCN 3.2 updates - PSR updates - DP 2.1 updates - SR-IOV RAS updates - VCN RAS support - SMU 13.x updates - Switch 1 element arrays to flexible arrays - Add RAS support for DF 4.3 - Stack size improvements - S0ix rework - Allow 0 as a vram limit on APUs - Handle profiling modes for SMU13.x - Fix possible segfault in failure case - Rework FW requests to happen in early_init for all IPs so that we don't lose the sbios console if FW is missing - Fix power reporting on certain firmwares for CZN/RN - Allow S0ix without BIOS support - Enable freesync over PCon - Re-enable the AGP aperture on GMC 11.x amdkfd: - Error handling fixes - PASID fixes - Fix for cleared VRAM BOs - Fix cleanup if GPUVM creation fails - Memory accounting fix - Use resource_size rather than open codeing it - GC11 mGPU fix radeon: - Switch 1 element arrays to flexible arrays - Fix memory leak on shutdown - move to new logging i915: - Meteorlake display/OA/GSC fw/workarounds enabling - DP MST DSC support - Gamma/degamma readout support for the state checker - Enable SDP split support for DP 2.0 - Add probe blocking support to i915.force_probe parameter - Enable Xe HP 4tile support - Avoid display direct calls to uncore - Fix HuC delayed load memory leaks - Add DG2 workarounds Wa_18018764978 and Wa_18019271663 - Improve suspend / resume times with VT-d scanout workaround active - Fix DG2 visual corruption on small BAR systems by not forgetting to copy CCS aux state - Fix TLB invalidation for Gen12.50 video and compute engines - Enable HF-EEODB by switching HDMI, DP and LVDS to use struct drm_edid - Start using unversioned DMC firmware paths for new platforms - ELD refactor: Stop using hardware buffer, precompute ELD - lots of display code refactoring nouveau: - drop legacy ioctl support - replace 0-sized array msm: - dpu/dsi/mdss: Support for SM8350, SM8450 SM8550 and SC8280XP platform - Added bindings for SM8150 - dpu: Partial support for DSC on SM8150 and SM8250 - dpu: Fixed color transformation matrix being lost on suspend/resume - dp: Support SDM845 and SC8280XP platforms - dp: Support for limiting DP link rate via DT property - dsi: Validate display modes according to the DSI OPP table - dsi: DSI PHY support for the SM6375 platform - Add MSM_SUBMIT_BO_NO_IMPLICI - a2xx: Support to load legacy firmware - a6xx: GPU devcore dump updates for a650/a660 - GPU devfreq tuning and fixes - Turn 8960 HDMI PHY into clock provider, - Make 8960 HDMI PHY use PXO clock from DT etnaviv: - experimental versilicon NPU support - report GPU load via fdinfo format - MMU fault message improvements tegra: - rework syncpoint interrupt mediatek: - DSI timing fix - fix config deps ast: - various fixes exynos: - restore bridge chain order fixes gud: - convert to shadow plane buffers - perform flushing synchronously during atomic update - Use new debugfs helpers arm/hdlcd: - Use new debugfs helper ili9486: - Support 16-bit pixel data imx: - Split off IPUv3 driver mipi-dbi: - convert to DRM shadow-plane helpers - rsp driver changes - Support separate I/O-voltage supply mxsfb: - Depend on ARCH_MXS or ARCH_MXC sun4i: - convert to new TV mode property vc4: - convert to new TV mode property - kunit tests - Support RGB565 and RGB666 formats - convert dsi driver to bridge - Various HVS an CRTC fixes v3d: - Do not opencode drm_gem_object_lookup() virtio: - improve tracing vkms: - support small cursors in IGT tests - Fix SEGFAULT from incorrect GEM-buffer mapping rcar-du: - fixes and improvements" * tag 'drm-next-2023-02-23' of git://anongit.freedesktop.org/drm/drm: (1455 commits) msm/fbdev: fix unused variable warning with clang. drm/fb-helper: Remove drm_fb_helper_unprepare() from drm_fb_helper_fini() dma-buf: make kobj_type structure constant drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt() drm/amd/display: disable SubVP + DRR to prevent underflow drm/amd/display: Fail atomic_check early on normalize_zpos error drm/amd/pm: avoid unaligned access warnings drm/amd/display: avoid unaligned access warnings drm/amd/display: Remove duplicate/repeating expressions drm/amd/display: Remove duplicate/repeating expression drm/amd/display: Make variables declaration inside ifdef guard drm/amd/display: Fix excess arguments on kernel-doc drm/amd/display: Add previously missing includes drm/amd/amdgpu: Add function prototypes to headers drm/amd/display: Add function prototypes to headers drm/amd/display: Turn global functions into static drm/amd/display: remove unused _calculate_degamma_curve function drm/amd/display: remove unused func declaration from resource headers drm/amd/display: unset initial value for tf since it's never used drm/amd/display: camel case cleanup in color_gamma file ...
2023-02-20drm/ast: Implement struct drm_plane_helper_funcs.atomic_enableThomas Zimmermann
Enable the primary plane for ast hardware via atomic_enable. Atomic helpers invoke this callback only when the plane becomes active. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230209154107.30680-3-tzimmermann@suse.de
2023-02-10drm/ast: Fix start address computationJocelyn Falempe
During the driver conversion to shmem, the start address for the scanout buffer was set to the base PCI address. In most cases it works because only the lower 24bits are used, and due to alignment it was almost always 0. But on some unlucky hardware, it's not the case, and some uninitialized memory is displayed on the BMC. With shmem, the primary plane is always at offset 0 in GPU memory. * v2: rewrite the patch to set the offset to 0. (Thomas Zimmermann) * v3: move the change to plane_init() and also fix the cursor plane. (Jammy Huang) Tested on a sr645 affected by this bug. Fixes: f2fa5a99ca81 ("drm/ast: Convert ast to SHMEM") Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jammy Huang <jammy_huang@aspeedtech.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230209094417.21630-1-jfalempe@redhat.com
2023-01-18drm/ast: Remove unnecessary include statements for drm_crtc_helper.hThomas Zimmermann
Several source files include drm_crtc_helper.h without needing it or only to get its transitive include statements; leading to unnecessary compile-time dependencies. Drop drm_crtc_helper.h where possible. v2: * update commit message (Sam) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230116131235.18917-7-tzimmermann@suse.de
2022-12-20drm/ast: Init iosys_map pointer as I/O memory for damage handlingThomas Zimmermann
Ast hardware scans out the primary plane from video memory, which is in I/O-memory space. Hence init the damage handler's iosys_map pointer as I/O memory. Not all platforms support accessing I/O memory as system memory, although it's usually not a problem in ast's x86-based systems. The error report is at [1]. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Fixes: f2fa5a99ca81 ("drm/ast: Convert ast to SHMEM") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Link: https://lore.kernel.org/lkml/202212170111.eInM0unS-lkp@intel.com/T/#u # 1 Link: https://patchwork.freedesktop.org/patch/msgid/20221216193005.30280-1-tzimmermann@suse.de
2022-10-19drm: Remove drm_mode_config::fb_baseZack Rusin
The fb_base in struct drm_mode_config has been unused for a long time. Some drivers set it and some don't leading to a very confusing state where the variable can't be relied upon, because there's no indication as to which driver sets it and which doesn't. The only usage of fb_base is internal to two drivers so instead of trying to force it into all the drivers to get it into a coherent state completely remove it. Signed-off-by: Zack Rusin <zackr@vmware.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Thomas Zimmermann <tzimemrmann@suse.de> Acked-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221019024401.394617-1-zack@kde.org
2022-10-16drm/ast: Avoid reprogramming primary-plane scanout addressThomas Zimmermann
Some AST-based BMCs stop display output for up to 5 seconds after reprogramming the scanout address. As the address is fixed, avoid re-setting the address' value. v2: * only update offset if it changed (Jocelyn) Reported-by: Jocelyn Falempe <jfalempe@redhat.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221013112923.769-9-tzimmermann@suse.de
2022-10-16drm/ast: Convert ast to SHMEMThomas Zimmermann
Replace GEM VRAM helpers with GEM SHMEM helpers in ast. Avoids OOM errors when allocating video memory. Also adds support for dma-buf functionality. Aspeed display hardware supports display resolutions of FullHD and higher at 32-bit pixel depth. But the amount of video memory is in the range of 8 MiB to 32 MiB, which adds constraints to the actually available resolutions. As atomic modesetting with VRAM helpers requires double buffering in video memory, ast fails to pageflip in some configurations. For example, FullHD with an active cursor plane does not work on devices with 16 MiB of video memory. Resolve this problem by converting the ast driver to GEM SHMEM helpers. Keep the buffer objects in system memory and copy to video memory on pageflips via shadow-plane helpers. Userspace used to require shadow planes for decent performance, but that's now provided by the driver. To replace the memory management, the patch also implements damage handling for the primary plane. With GEM SHMEM helpers, dma-buf import and export is now supported by ast. This allows easier screen mirroring across devices or with an Aspeed-based BMC. A corresponding feature request is available at [1]. v2: * fix typos in commit message (Jocelyn) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://lore.kernel.org/dri-devel/20220901124451.2523077-1-oushixiong@kylinos.cn/ # [1] Link: https://patchwork.freedesktop.org/patch/msgid/20221013112923.769-8-tzimmermann@suse.de
2022-10-16drm/ast: Style cleanups in plane codeThomas Zimmermann
Rename some of the variables in the plane code to better reflect the old and new state during checks and updates. Change some indention as well. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221013112923.769-7-tzimmermann@suse.de
2022-10-16drm/ast: Rename struct ast_cursor_plane to struct ast_planeThomas Zimmermann
Rename the plane structure struct ast_cursor_plane to struct ast_plane as it will be used for the primary plane as well. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221013112923.769-6-tzimmermann@suse.de
2022-10-16drm/ast: Remove cursor double bufferingThomas Zimmermann
Update the cursor image via damage handling in-place. The cursor's double buffering has no visible effect on the output, so remove it. Done in preparation of switching ast to GEM SHMEM helpers. Removing double buffering will allow us to use the same data structure for primary and cursor plane. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221013112923.769-5-tzimmermann@suse.de
2022-10-16drm/ast: Do not call drm_atomic_add_affected_planes()Thomas Zimmermann
There's no need to add planes to the atomic state. Remove the call to drm_atomic_add_affected_planes() from ast. On full modesets, the DRM helpers already add a CRTC's planes to the atomic state; see drm_atomic_helper_check_modeset(). There's no reason to call drm_atomic_add_affected_planes() unconditionally in the CRTC's atomic_check() in ast. It's also too late, as the atomic_check() of the added planes will not be called before the commit. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221013112923.769-4-tzimmermann@suse.de
2022-10-16drm/ast: Call drm_atomic_helper_check_plane_state() unconditionallyThomas Zimmermann
Always call drm_atomic_helper_check_plane_state() in each plane's atomic_check function. At the minimum, it needs to set or clear the plane state's 'visible' field. Otherwise the plane-state handling is bogus and would keep updating planes that have been disabled. While at it, also warn if the primary plane has been enabled, but is not visible. This cannot legally happen as the plane always covers the entire screen. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221013112923.769-3-tzimmermann@suse.de
2022-10-16drm/ast: Acquire I/O-register lock in atomic_commit_tail functionThomas Zimmermann
Hold I/O-register lock in atomic_commit_tail to protect all pipeline updates at once. Protects modesetting against concurrent EDID reads. Complex modesetting operations involve mode changes and plane updates. These steps used to be protected individually against concurrent I/O. Make all this atomic wrt to reading display modes via EDID. The EDID code in the connector's get_modes helper already acquires the necessary lock. A similar issue was fixed in commit 2d70b9a1482e ("drm/mgag200: Acquire I/O-register lock in atomic_commit_tail function") for mgag200. v2: * fix typo in commit message (Jocelyn) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221013112923.769-2-tzimmermann@suse.de
2022-10-08drm/atomic-helper: Replace drm_atomic_helper_check_crtc_state()Thomas Zimmermann
Rename the atomic helper function drm_atomic_helper_check_crtc_state() to drm_atomic_helper_check_crtc_primary_plane() and only check for an attached primary plane. Adapt callers. Instead of having one big function to check for various CRTC state conditions, we rather want smaller functions that drivers can pick individually. v5: * rebase on top of udl changes Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221007124338.24152-3-tzimmermann@suse.de
2022-10-05drm/ast: Add Atomic gamma lut support for aspeedJocelyn Falempe
The current ast driver only supports legacy gamma interface. This also fixes a Gnome3/Wayland error which incorrectly adds gamma to atomic commit: "Page flip discarded: CRTC property (GAMMA_LUT) not found" I only tested remotely, so I wasn't able to check that it had an effect on the VGA output. But when activating "Night Light" in Gnome, ast_crtc_load_lut() is called. v2: use the same functions as mgag200. handle 16bits color mode. v3: Check gamma_lut size in atomic check. v4: revert 16bits mode, v1 was correct. make sure gamma table are set when primary plane format changes. remove rgb888 format that is not used. Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220930094754.745626-1-jfalempe@redhat.com
2022-09-20drm/ast: Fix video broken in some resolutions on ast2600Jammy Huang
Some cases are not handled well for ast2600. Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220916091706.4559-1-jammy_huang@aspeedtech.com
2022-09-20drm/ast: Add resolution support for 1152x864@75Jammy Huang
Add 1152x864 into support list. Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220916085058.3386-1-jammy_huang@aspeedtech.com
2022-07-26drm/atomic-helper: Remove _HELPER_ infix from DRM_PLANE_HELPER_NO_SCALINGThomas Zimmermann
Rename DRM_PLANE_HELPER_NO_SCALING to DRM_PLANE_NO_SCALING. The constant is not really a helper, but rather a characteristic of the plane itself. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-4-tzimmermann@suse.de
2022-07-26drm/atomic-helper: Move DRM_PLANE_HELPER_NO_SCALING to atomic helpersThomas Zimmermann
The macro DRM_PLANE_HELPER_NO_SCALING is only useful with the interfaces in drm_atomic_helper.h, but defined in drm_plane_helper.h. So half of DRM includes the latter header file for using this macro. Move the macro and remove the include statements. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-3-tzimmermann@suse.de
2022-06-27drm/ast: Enable primary plane with CRTCThomas Zimmermann
As the CRTC requires a primary plane for display, ensure that the primary plane is enabled with the CRTC. Use drm_atomic_helper_check_crtc_state(). Add all affected planes to the atomic state so that their state will be checked as well. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220617103226.25617-4-tzimmermann@suse.de
2022-06-27drm/ast: Fix black screen when getting out of suspendJocelyn Falempe
With an AST2600, the screen is garbage when going out of suspend. This is because color settings are lost, and not restored on resume. Force the color settings on DPMS_ON, to make sure the settings are correct. I didn't write this code, it comes from the out-of-tree aspeed driver v1.13 https://www.aspeedtech.com/support_driver/ Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Venkat Tadikonda <venkateswara.rao@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Tested-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220622124815.356035-1-jfalempe@redhat.com
2022-06-20drm: Drop drm_edid.h from drm_crtc.hVille Syrjälä
drm_crtc.h has no need for drm_edid.h, so don't include it. Avoids useless rebuilds of the entire universe when touching drm_edid.h. Quite a few placs do currently depend on drm_edid.h without actually including it directly. All of those need to be fixed up. v2: Fix up i915 and msm some more v3: Fix alphabetical ordering (Sam) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220614090245.30283-1-ville.syrjala@linux.intel.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com>
2022-06-08drm/ast: Support multiple outputsThomas Zimmermann
Systems with AST graphics can have multiple output; typically VGA plus some other port. Record detected output chips in a bitmask and initialize each output on its own. Assume a VGA output by default and use SIL164 and DP501 if available. For ASTDP assume that it can run in parallel with VGA. Tested on AST2100. v3: * define a macro for each BIT(ast_tx_chip) (Patrik) v2: * make VGA/SIL164/DP501 mutually exclusive Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Fixes: a59b026419f3 ("drm/ast: Initialize encoder and connector for VGA in helper function") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220607092008.22123-2-tzimmermann@suse.de
2022-05-05drm/ast: Protect concurrent access to I/O registers with lockThomas Zimmermann
Add a mutex lock to protect concurrent access to I/O registers against each other. This happens between invocation of commit- tail functions and get-mode operations. Both with use the CRTC index register AST_IO_CRTC_PORT. Concurrent access can lead to failed mode-setting operations. v2: * fix typo in commit description (Jocelyn) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reported-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220502142514.2174-3-tzimmermann@suse.de
2022-05-03drm/ast: Create the driver for ASPEED proprietory Display-PortKuoHsiang Chou
V1: 1. The MCU FW controling ASPEED DP is loaded by BMC boot loader. 2. Driver starts after CR[3:1] == 111b that indicates Tx is ASTDP, and CRD1[5] has been asserted by BMVC boot loader. 3. EDID is prioritized by DP monitor. 4. DP's EDID has high priority to decide resolution supporting. V2: Modules description: 1. ASTDP (ASPEED DisplayPort) is controlled by dedicated AST-MCU (ASPEED propriatary MCU). 2. MCU is looping in charged of HPD, Read EDID, Link Training with DP sink. 3. ASTDP and AST-MUC reside in BMC (Baseboard Management controller) addressing-space. 4. ASPEED DRM driver requests MCU to get HPD and EDID by CR-scratched register. Booting sequence: 1. Check if TX is ASTDP // ast_dp_launch() 2. Check if DP-MCU FW has loaded // ast_dp_launch() 3. Read EDID // ast_dp_read_edid() 4. Resolution switch // ast_dp_SetOutput() V3: 1. Remove unneeded semicolon. 2. Apply to git://anongit.freedesktop.org/drm/drm, instead of git://anongit.freedesktop.org/drm/drm-misc 3. Resolve auto build test WARNINGs on V1 patch. V4: 1. Sync code-base with kernel 5.17_rc6 2. Remove the define of DPControlPower, because DP chips need to be powered on to be used. 3. Remove the switches of PHY and Display from EDID procedure. 4. Revise increaing delay to fixed delay, because this version kernel doesn't detect minitor consistenntly. 5. Create clean-up code used for reset of power state on errors with -EIO manner. 6. Revise the DP detection by TX type and its DP-FW status during booting and resume. 7. Correct the CamelCase Style. 8. Use register reading while needing, and remove to hold full register. 9. Instead of 'u8', revise to 'bool' on swwitch of PHY and video. 10.Correct typo 11.Remove the duplicated copy of TX definition. 12.Use EDID_LENGTH as the constant of 128. Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220428075603.20904-1-kuohsiang_chou@aspeedtech.com
2022-02-25Merge tag 'drm-misc-next-2022-02-23' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.18: UAPI Changes: Cross-subsystem Changes: - Split out panel-lvds and lvds dt bindings . - Put yes/no on/off disabled/enabled strings in linux/string_helpers.h and use it in drivers and tomoyo. - Clarify dma_fence_chain and dma_fence_array should never include eachother. - Flatten chains in syncobj's. - Don't double add in fbdev/defio when page is already enlisted. - Don't sort deferred-I/O pages by default in fbdev. Core Changes: - Fix missing pm_runtime_put_sync in bridge. - Set modifier support to only linear fb modifier if drivers don't advertise support. - As a result, we remove allow_fb_modifiers. - Add missing clear for EDID Deep Color Modes in drm_reset_display_info. - Assorted documentation updates. - Warn once in drm_clflush if there is no arch support. - Add missing select for dp helper in drm_panel_edp. - Assorted small fixes. - Improve fb-helper's clipping handling. - Don't dump shmem mmaps in a core dump. - Add accounting to ttm resource manager, and use it in amdgpu. - Allow querying the detected eDP panel through debugfs. - Add helpers for xrgb8888 to 8 and 1 bits gray. - Improve drm's buddy allocator. - Add selftests for the buddy allocator. Driver Changes: - Add support for nomodeset to a lot of drm drivers. - Use drm_module_*_driver in a lot of drm drivers. - Assorted small fixes to bridge/lt9611, v3d, vc4, vmwgfx, mxsfb, nouveau, bridge/dw-hdmi, panfrost, lima, ingenic, sprd, bridge/anx7625, ti-sn65dsi86. - Add bridge/it6505. - Create DP and DVI-I connectors in ast. - Assorted nouveau backlight fixes. - Rework amdgpu reset handling. - Add dt bindings for ingenic,jz4780-dw-hdmi. - Support reading edid through aux channel in ingenic. - Add a drm driver for Solomon SSD130x OLED displays. - Add simple support for sharp LQ140M1JW46. - Add more panels to nt35560. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/686ec871-e77f-c230-22e5-9e3bb80f064a@linux.intel.com
2022-02-11Merge tag 'drm-intel-next-2022-02-08' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Cross-subsystem Changes: ------------------------ dma-buf: - dma-buf-map: Rename to iosys-map (Lucas) Core Changes: ------------- drm: - Always include the debugfs_entry in drm_crtc (Ville) - Add orientation quirk for GPD Win Max (Anisse) Driver Changes: --------------- gvt: - Constify some pointers. (Rikard Falkeborn) - Use list_entry to access list members. (Guenter Roeck) - Fix cmd parser error for Passmark9. (Zhenyu Wang) i915: - Various clean-ups including headers and removing unused and unnecessary stuff\ (Jani, Hans, Andy, Ville) - Cleaning up on our registers definitions i915_reg.h (Matt) - More multi-FBC refactoring (Ville) - Baytrail backlight fix (Hans) - DG1 OPROM read through SPI controller (Clint) - ADL-N platform enabling (Tejas) - Fix slab-out-of-bounds access (Jani) - Add opregion mailbox #5 support for possible EDID override (Anisse) - Fix possible NULL dereferences (Harish) - Updates and fixes around display voltage swing values (Clint, Jose) - Fix RPM wekeref on PXP code (Juston) - Many register definitions clean-up, including planes registers (Ville) - More conversion towards display version over the old gen (Madhumitha, Ville) - DP MST ESI handling improvements (Jani) - drm device based logging conversions (Jani) - Prevent divide by zero (Dan) - Introduce ilk_pch_pre_enable for complete modeset abstraction (Ville) - Async flip optimization for DG2 (Stanislav) - Multiple DSC and bigjoiner fixes and improvements (Ville) - Fix ADL-P TypeC Phy ready status readout (Imre) - Fix up DP DFP 4:2:0 handling more display related fixes (Ville) - Display M/N cleanup (Ville) - Switch to use VGA definitions from video/vga.h (Jani) - Fixes and improvements to abstract CPU architecture (Lucas) - Disable unsused power wells left enabled by BIOS (Imre) - Allow !join_mbus cases for adlp+ dbuf configuration (Ville) - Populate pipe dbuf slices more accurately during readout (Ville) - Workaround broken BIOS DBUF configuration on TGL/RKL (Ville) - Fix trailing semicolon (Lucas) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YgKFLmCgpv4vQEa1@intel.com
2022-02-08drm/ast: Move SIL164-based connector code into separate helpersThomas Zimmermann
Add helpers for initializing SIL164-based connectors. These used to be handled by the VGA connector code. But SIL164 provides output via DVI-I, so set the encoder and connector types accordingly. If a SIL164 chip has been detected, ast will now create a DVI-I connector instead of a VGA connector. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-10-tzimmermann@suse.de
2022-02-08drm/ast: Move DP501-based connector code into separate helpersThomas Zimmermann
Add helpers for DP501-based connectors. DP501 provides output via DisplayPort. This used to be handled by the VGA connector code. If a DP501 chip has been detected, ast will now create a DisplayPort connector instead of a VGA connector. Remove the DP501 code from ast_vga_connector_helper_get_modes(). Also remove the call to drm_connector_update_edid_property(), which is performed by drm_get_edid(). Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-9-tzimmermann@suse.de
2022-02-08drm/ast: Read encoder possible-CRTC mask from drm_crtc_mask()Thomas Zimmermann
Read the encoder's possible-CRTC mask from the involved CRTC instead of hard-coding it. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-8-tzimmermann@suse.de
2022-02-08drm/ast: Initialize encoder and connector for VGA in helper functionThomas Zimmermann
Move encoder and connector initialization into a single helper and put all related mode-setting structures into a single place. Done in preparation of moving transmitter code into separate helpers. No functional changes. v2: * move encoder CRTC bitmask fix into separate patch (Javier) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220207141544.30015-7-tzimmermann@suse.de