| Age | Commit message (Collapse) | Author |
|---|
|
The TLB is organized in groups of 8 entries, each one is 4K.
On Tahiti, the HW requires these GART entries to be 32K-aligned.
This fixes a VCE 1 firmware validation failure that can happen
after suspend/resume since we use amdgpu_gtt_mgr for VCE 1.
v2:
- Change variable declaration order
- Add comment about "V bit HW bug"
Fixes: 698fa62f56aa ("drm/amdgpu: Add helper to alloc GART entries")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
suspend_all_sdma_gangs is supported in new MES firmware for gfx 12.1
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michael Chen<michael.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
v3:
improve the coding style.
v2:
use debugfs_create_x64 and debugfs_create_x8 to create node.
v1:
1. Add guest driver CUID support
2. Do not expose vf index(variable "fcn_idx") to customers,
replace the fcn_idx with pad.
Only expose the unitid to customers.
background:
Change fcn_idx to pad, VF index won't expose to guest vm.
Introduce a new unitid field as the VF identifier to replace the VF index:
1).unitid is assigned by the host driver
2).It is delivered to the guest via the pf2vf message
3).The application or umd can retrieve united from the sysfs node
Signed-off-by: chong li <chongli2@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Discovery table may be kept at offset 0 by host driver. Remove the
validation check.
Fixes: 01bdc7e219c4 ("drm/amdgpu: New interface to get IP discovery binary v3")
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
va_cursor struct needs to be cleaned even if the mapping
has been removed already.
Also simplify it by make it a void function as return value
check isn't needed as its called during tear down.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
amdgpu_gem_userptr_ioctl() currently accepts any value of args->addr
and only discovers an out-of-range pointer much later, inside
amdgpu_gem_object_create() and the HMM mirror registration path.
Userspace can drive that path with kernel-side virtual addresses;
the get_user_pages() layer rejects them, but only after the driver
has already allocated a GEM object and started wiring up notifier
state that then has to be torn down on failure.
Add an access_ok() guard at the top of the ioctl, right after the
existing page-alignment check and before flag validation, so any
address that does not lie within the calling task's user address
range is rejected with -EFAULT before any allocation occurs. No
legitimate ROCm/HSA userspace passes kernel-mode pointers through
this interface, so this is defense-in-depth rather than a behaviour
change for valid callers; -EFAULT matches the convention already
used by other uaccess-style rejections in the kernel.
Also add an explicit #include <linux/uaccess.h>; access_ok() is
otherwise only available transitively through other headers in
this translation unit.
Signed-off-by: Amir Shetaia <Amir.Shetaia@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
VPE1 could possibly hang and fail to power off at the end of commands in
collaboration mode. This workaround adds a COLLAB_SYNC after TRAP to
force instances synchronized to avoid VPE1 fail to power off.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alan liu <haoping.liu@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5171
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pagefaults does not have process information correctly populated
as vm->task is not set during vm_init but should be updated while
real submission. So setting that up during signal_ioctl to get
the correct submission process details.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
While tear down of a userq_mgr is happening when all the queues
are free we should cancel any reset work if pending before exiting.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The depends on !UML was added in commit dffe68131707 ("amdgpu: Avoid
building on UML") to work around build failures with allyesconfig on
UML. The original errors were:
- smu7_hwmgr.c: incompatible pointer type 'struct cpuinfo_um *' vs
'struct cpuinfo_x86 *' in intel_core_rkl_chk()
- kfd_topology.c: 'struct cpuinfo_um' has no member named 'apicid'
Both issues have since been resolved independently:
- intel_core_rkl_chk() has been removed entirely.
- kfd_topology.c now uses a proper #ifdef CONFIG_X86_64 guard.
- All other cpuinfo_x86/cpu_data() references in the driver are
guarded by #if IS_ENABLED(CONFIG_X86) or #ifdef CONFIG_X86_64.
Removing this exclusion allows CONFIG_DRM_AMDGPU to be selected on UML,
which in turn enables running KUnit tests (such as amdgpu_dm_crc_test)
under UML without needing a full hardware-capable kernel build.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It is illegal to schedule reset work from another reset work!
Fix this by scheduling the userq reset work directly on the work queue
of the reset domain.
Not fully tested, I leave that to the IGT test cases.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
mqd and fw objects are queue core objects which should remain
valid and never be unmapped and evicted for user queues to work
properly.
During eviction if these buffers are evicted the hw continue to
use the invalid addresses and caused page faults and system hung.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To access the bo from vm mapping first lock the root bo and
then the object bo of the mapping to make sure both locks
are taken safely.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
gfx_v12_0_init_microcode() always loads RS64 CP ucode but never set
adev->gfx.rs64_enable, so it stayed false and code that branches on it
(e.g. MEC pipe reset) used the legacy CP_MEC_CNTL path incorrectly.
Match GFX11: derive RS64 mode from the PFP firmware header (v2.0) via
amdgpu_ucode_hdr_version(). Log at debug when RS64 is enabled.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch adds support for vpe v2.0.0 with new structs and ip functions
Acked-by: Roy Chan <Roy.Chan@amd.com>
Signed-off-by: Caden Chien <chih-wei.chien@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
A callback function is added to setup doorbell range during vpe hw
queue initialization on nbio 7.11.4.
Signed-off-by: Caden Chien <chih-wei.chien@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
S2A doorbell entry 5 on nbio 7.11.4 is used by vpe 2.0
Signed-off-by: Caden Chien <chih-wei.chien@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove the wrapper function.
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When we do a full adapter reset, if we know the timedout fence
mark the fence with -ETIME rather than -ECANCELED so it
gets properly handled by userspace.
v2: rebase
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The legacy CPER debugfs reader can reach the payload path without a
valid pointer snapshot. The remaining user byte count is also treated as
the ring occupancy in dwords, so reads past the header can copy more than
requested.
Take the CPER lock before sampling pointers. Resample rptr/wptr for
payload reads, bound the payload copy by available dwords and the
remaining user size, and advance the file position for each dword copied.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There are gaps in the pf2vf message structure
between the guest driver and the host driver.
The pf2vf message info structure must be kept in sync
between both sides to ensure correct interpretation of fields.
Signed-off-by: chong li <chongli2@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The function mes_v12_1_map_test_bo incorrectly returned 0 unconditionallyon error path,
which would hide the real error code and mislead upperlayers about the failure status.
Fix it by returning the correct error code 'r' instead of 0.
Fixes: 44e5195fa3d4 ("drm/amdgpu/mes_v12_1: add mes self test");
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix lock inversions pointed out by Prike and Sunil. The hang detection
timeout *CAN'T* grab locks under which we wait for fences, especially
not the userq_mutex lock.
Then instead of this completely broken handling with the
hang_detect_fence just cancel the work when fences are processed and
re-start if necessary.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Well the reset handling seems broken on multiple levels.
As first step of fixing this remove most calls to the hang detection.
That function should only be called after we run into a timeout! And *NOT*
as random check spread over the code in multiple places.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This one was fortunately not looking so bad as the wait ioctl path, but
there were still a few things which could be fixed/improved:
1. Allocating with GFP_ATOMIC was quite unnecessary, we can do that
before taking the userq_lock.
2. Use a new mutex as protection for the fence_drv_xa so that we can do
memory allocations while holding it.
3. Starting the reset timer is unnecessary when the fence is already
signaled when we create it.
4. Cleanup error handling, avoid trying to free the queue when we don't
even got one.
v2: fix incorrect usage of xa_find, destroy the new mutex on error
v3: cleanup ref ordering
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The purpose of a GPU reset is to make sure that fence can be signaled
again and the signal and resume workers can make progress again.
So waiting for the resume worker or any fence in the GPU reset path is
just utterly nonsense.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix this by skipping the sysfs disable mapping when the GPU is
currently undergoing a reset or suspend flow.
Additionally, add debug logging in psp_ptl_invoke() to better
trace PTL state and format queries/updates cmd.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
During RAS UE-triggered GPU reset, gfx_v9_4_3_hw_fini() attempts to
send a PTL disable command to PSP. Since PSP is unresponsive at that
point, this produces spurious error logs on all hive nodes:
PTL command 0xa0000001 failed, PSP response status: 0xFFFFFFFF
PTL initialization failed (-5)
Skip the PTL disable command when GPU reset is in progress, as PTL
will be properly re-initialized during post-reset recovery via
gfx_v9_4_3_late_init().
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Only set the bit when PTL is actually being disabled (state=0)
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Create PTL sysfs in xgmi_reset_on_init restore path for MINIMAL_XGMI
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move amdgpu_amdkfd_stop/start_sched calls from kfd_ptl_control()
into amdgpu_ptl_perf_monitor_ctrl() so all PTL callers (KFD ioctl,
sysfs, GFX init) get consistent scheduling management.
Add amdgpu_amdkfd_stop/start_sched_all() wrappers to stop and
restart KFD scheduling on all nodes without assuming node ID ordering.
v3:
* call start/stop for PTL Set Only
v2:
* move the stop/start sched function to
amdgpu_ptl_perf_monitor_ctrl(Lijo)
* add wrapper amdgpu_amdkfd_stop_sched_all and
amdgpu_amdkfd_start_sched_all (Lijo)
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
GC 9.4.4 uses SPI busy status for idle detection instead of GRBM GUI_ACTIVE.
Add version check to use SPI_BUSY for 9.4.4 while keeping GRBM_STATUS
GUI_ACTIVE check for other GC versions.
v2: move this check into amdgpu_ptl_perf_monitor_ctrl(Lijo)
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add an explicit check on cmd->resp.status after psp_cmd_submit_buf()
returns to ensure PTL state is only updated on actual success.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add F8 and VECTOR to amdgpu_ptl_fmt and PSP format mapping.
Update PTL format strings and GFX format enum to keep PSP/KFD in sync.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add a new kernel module parameter 'amdgpu.ptl' to allow
users to enable or disable PTL feature at driver loading time.
Parameter values:
*) 0 or -1: disable PTL (default)
*) 1: enable PTL
*) 2: permanently disable PTL
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use a bitmap to track PTL disable requests from sysfs and profiler.
PTL is only re-enabled once all sources have released their disable
requests, avoiding premature enablement.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Introduce a new IOCTL option to allow userspace explicit control over
the Peak Tops Limiter (PTL) state for profiling
Link: https://github.com/ROCm/rocm-systems/tree/develop/projects/rocprofiler-sdk
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add per-GPU sysfs files under /sys/class/drm/cardX/device/ptl to
control the Peak Tops Limiter (PTL) feature. Exposes ptl_enable
(enable/disable PTL), ptl_format (set/query preferred formats),
and ptl_supported_formats (list supported formats)
Example usage
-------------
Query PTL status:
`cat /sys/class/drm/card1/device/ptl/ptl_enable`
Enable PTL:
`sudo bash -c "echo 1 > /sys/class/drm/card1/device/ptl/ptl_enable"`
Disable PTL:
`sudo bash -c "echo 0 > /sys/class/drm/card1/device/ptl/ptl_enable"`
Set PTL preferred formats:
`sudo bash -c "echo I8,F32 > /sys/class/drm/card1/device/ptl/ptl_format"`
Query supported formats:
`cat /sys/class/drm/card1/device/ptl/ptl_supported_formats`
v3 changes:
* move N/A to previous format in format show(Alex)
* fix format check for format store(Alex)
* drop the ptl declarations into amdgpu_ptl.h(Alex)
v2 changes:
* add usage commands in commit info (Alex)
* move amdgpu_ptl_fmt into kgd_kfd_interface.h (Alex)
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add kgd->ptl_ctrl() callback so KFD can query/enable/disable
PTL state through the PSP performance monitor interface.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Introduce hardware detection, runtime state tracking and a
kgd->ptl_ctrl() callback to enable/disable/query PTL via the
PSP performance-monitor interface (commands 0xA0000000/1).
The driver now exposes PTL capability to KFD and keeps the
software state in sync with the hardware.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Introduce a Peak Tops Limiter (PTL) driver that dynamically caps
engine frequency to ensure delivered TOPS never exceeds a defined
TOPS_limit. This initial implementation provides core data structures
and kernel-space interfaces (set/get, enable/disable) to manage PTL state.
PTL performs a firmware handshake to initialize its state and update
predefined format types. It supports updating these format types at
runtime while user-space tools automatically switch PTL state, and
also allows explicitly switching PTL state via newly added commands.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Introduce new psp interfaces and structures for performance
monitoring hardware control.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-7.2-2026-05-06:
amdgpu:
- GFX9 fixes
- Hawaii SMU fixes
- SDMA4 fix
- GART fixes
- Userq fixes
- Finish support for using multiple SDMA queues for TTM operations
- SWSMU updates
- Misc cleanups and fixes
- GC 12.1 updates
- RAS updates
- SMU 15.0.8 updates
- DCN 4.2 updates
- DC type conversion fixes
- Enable DC power module
- Replay/PSR updates
- SMU 13.x updates
- Compute queue quantum MQD updates
- ASPM fix
- GPUVM fixes
- DCE 6 fixes
- Align VKMS with common implementation
- RDNA 4 fix
- DC analog support fixes
- UVD 3 fixes
- TCC harvesting fixes for SI
- GC 11 APU module reload fix
- NBIO 6.3.2 support
- IH 7.1 updates
- DC cursor fixes
- VCN user fence fixes
- JPEG user fence fixes
- DC support for connectors without DDC
- Prefer ROM BAR for default VGA device
- DC bandwidth fixes
amdkfd:
- GPUVM TLB flush fix
- Hotplug fix
- Boundary check fixes
- Misc cleanups and fixes
- SVM fixes
- CRIU fixes
radeon:
- Hawaii SMU fixes
- Misc cleanups and fixes
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260506164726.1733646-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.1-rc1:
UAPI Changes:
- Expose per-client BO memory usage via fdinfo in amdxdna. (Hou)
- Change the default priority of drm scheduler to fair. (Tvrtko)
Cross-subsystem Changes:
- Revert hugetlb support in udmabuf. (Gunthorpe)
- Fix error in udmabuf with CONFIG_DMA_API_DEBUG(/ _SG). (Gavrilov)
- Add Docbook for DRM_IOCTL_SYNCOBJ_EVENTFD, (Ser)
clarify drm_bridge_get/put. (Tvrtko)
- Change signature of drm_connector_attach_hdr_output_metadata_property. (Canal)
- Use IOVA allocations in gpusvm and pagemap APIs. (Brost)
- Fix tracepoints vs dma-fence lifetime. (Tvrtko)
- Convert st-dma*.c tests to use kunit. (Gunthorpe)
Core Changes:
- Deduplicate counter and timestamp retrieval in vblank code. (Ville)
- Parse AMD VSDB v3 in CTA extension blocks, and use it in amdgpu. (Chen)
- Prevent bridge and encoder chain changes at inopportune times. (Ceresoli)
- Map the run queue 1:1 to the drm scheduler. (Tvrtko)
Driver Changes:
- Assorted bugfixes and (documentation) updates to rockchip, bridge/synopsis,
panfrost, tidss, accel/qaic, tilcdc, vc4, ast, imagination, panthor,
renesas, accel/amdxdna, msxfb, bridge/imx8mp, nouveau.
bridge/analogix_dp, bridge/exynos_dp, omap.
- Add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1, panels.
- Add support for a lot of waveshare panels (Baryshkov)
- Support for AIE4 devices in accel/wamdxdna. (Zhang)
- Enable support for GEM shrinking in panthor. (Goel/Brezillon)
- Runtime Power Management is added to v3d. (Canal)
- Allow panel probing and use the panel bridge helper in analogix_dp. (Ding)
- Support XRGB1555 and C8 in mgag and XRGB1555 in ast. (Zimmermann)
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/bf31b1a1-951b-4f60-b226-22e8c083697d@linux.intel.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
As preparation for independent fences remove the extra slab, kmalloc
should do just fine.
v2: use GFP_KERNEL instead of GFP_ATOMIC
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use drm_exec to take both locks i.e vm root bo and
wptr_obj bo to access the mapping data properly.
This fixes the security issue of unmap the wptr_obj while
a queue creation is in progress and passing other
bo at same address.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Find the default size required and use the helper funcction to set gart size.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add a helper to make any adjustments to gart size based on other
parameters or conditions.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fetching from platform ROM doesn't work with hybrid ROM images. For
default VGA devices also prefer ROM BAR.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
GART TLB is flushed after unmapping but not after mapping. Since
amdgpu_bo_create_kernel() does not zero-initialize the buffer, when a
single PTE is written the TLB may speculatively load other uninitialized
entries from the same cacheline. Those garbage entries can appear valid,
and a subsequent write to another PTE in the same cacheline may cause the
GPU to use a stale garbage PTE from the TLB.
Fix this by calling memset_io() to zero-initialize the GART table with
gart_pte_flags immediately after allocation.
Using AMDGPU_GEM_CREATE_VRAM_CLEARED, SDMA-based clear will not work
since SDMA needs GART to be initialized to work.
Suggested-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
