| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Nothing major, some left-overs from the recent merging window (MTE,
coco) and some newly found issues like the ptrace() ones.
- MTE/hugetlbfs:
- Set VM_MTE_ALLOWED in the arch code and remove it from the core
code for hugetlbfs mappings
- Fix copy_highpage() warning when the source is a huge page but
not MTE tagged, taking the wrong small page path
- drivers/virt/coco:
- Add the pKVM and Arm CCA drivers under the arm64 maintainership
- Fix the pkvm driver to fall back to ioremap() (and warn) if the
MMIO_GUARD hypercall fails
- Keep the Arm CCA driver default 'n' rather than 'm'
- A series of fixes for the arm64 ptrace() implementation,
potentially leading to the kernel consuming uninitialised stack
variables when PTRACE_SETREGSET is invoked with a length of 0
- Fix zone_dma_limit calculation when RAM starts below 4GB and
ZONE_DMA is capped to this limit
- Fix early boot warning with CONFIG_DEBUG_VIRTUAL=y triggered by a
call to page_to_phys() (from patch_map()) which checks pfn_valid()
before vmemmap has been set up
- Do not clobber bits 15:8 of the ASID used for TTBR1_EL1 and TLBI
ops when the kernel assumes 8-bit ASIDs but running under a
hypervisor on a system that implements 16-bit ASIDs (found running
Linux under Parallels on Apple M4)
- ACPI/IORT: Add PMCG platform information for HiSilicon HIP09A as it
is using the same SMMU PMCG as HIP09 and suffers from the same
errata
- Add GCS to cpucap_is_possible(), missed in the recent merge"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: ptrace: fix partial SETREGSET for NT_ARM_GCS
arm64: ptrace: fix partial SETREGSET for NT_ARM_POE
arm64: ptrace: fix partial SETREGSET for NT_ARM_FPMR
arm64: ptrace: fix partial SETREGSET for NT_ARM_TAGGED_ADDR_CTRL
arm64: cpufeature: Add GCS to cpucap_is_possible()
coco: virt: arm64: Do not enable cca guest driver by default
arm64: mte: Fix copy_highpage() warning on hugetlb folios
arm64: Ensure bits ASID[15:8] are masked out when the kernel uses 8-bit ASIDs
ACPI/IORT: Add PMCG platform information for HiSilicon HIP09A
MAINTAINERS: Add CCA and pKVM CoCO guest support to the ARM64 entry
drivers/virt: pkvm: Don't fail ioremap() call if MMIO_GUARD fails
arm64: patching: avoid early page_to_phys()
arm64: mm: Fix zone_dma_limit calculation
arm64: mte: set VM_MTE_ALLOWED for hugetlbfs at correct place
|
|
HiSilicon HIP09A platforms using the same SMMU PMCG with HIP09
and thus suffers the same erratum. List them in the PMCG platform
information list without introducing a new SMMU PMCG Model.
Update the silicon-errata.rst as well.
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Qinxin Xia <xiaqinxin@huawei.com>
Link: https://lore.kernel.org/r/20241205013331.1484017-1-xiaqinxin@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Clean up the existing export namespace code along the same lines of
commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo)
to __section("foo")") and for the same reason, it is not desired for the
namespace argument to be a macro expansion itself.
Scripted using
git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file;
do
awk -i inplace '
/^#define EXPORT_SYMBOL_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/^#define MODULE_IMPORT_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/MODULE_IMPORT_NS/ {
$0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g");
}
/EXPORT_SYMBOL_NS/ {
if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) {
if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ &&
$0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ &&
$0 !~ /^my/) {
getline line;
gsub(/[[:space:]]*\\$/, "");
gsub(/[[:space:]]/, "", line);
$0 = $0 " " line;
}
$0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/,
"\\1(\\2, \"\\3\")", "g");
}
}
{ print }' $file;
done
Requested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- replace power_supply_register_no_ws() with power_supply_register()
and a new "no_wakeup_source" field in struct power_supply_config
- constify battery info tables in the core and all drivers
- switch back to remove callback for all platform drivers
- allow power_supply_put() to be called from atomic context
- mark attribute arrays read-only after init
Power-supply drivers:
- new driver for TWL6030 and TWL6032
- rk817: improve battery capacity calibration
- misc small cleanups and fixes"
* tag 'for-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (42 commits)
power: reset: ep93xx: add AUXILIARY_BUS dependency
dt-bindings: power: reset: Convert mode-.* properties to array
power: supply: sc27xx: Fix battery detect GPIO probe
dt-bindings: power: supply: sc27xx-fg: document deprecated bat-detect-gpio
reset: keystone-reset: remove unused macros
power: supply: axp20x_battery: Use scaled iio_read_channel
power: supply: axp20x_usb_power: Use scaled iio_read_channel
power: supply: generic-adc-battery: change my gmail
power: supply: pmu_battery: Set power supply type to BATTERY
power: Switch back to struct platform_driver::remove()
power: supply: hwmon: move interface to private header
power: supply: rk817: Update battery capacity calibration
power: supply: rk817: stop updating info in suspend
power: supply: rt9471: Use IC status regfield to report real charger status
power: supply: rt9471: Fix wrong WDT function regfield declaration
dt-bindings: power/supply: qcom,pmi8998-charger: Drop incorrect "#interrupt-cells" from example
power: supply: core: mark attribute arrays as ro_after_init
power: supply: core: unexport power_supply_property_is_writeable()
power: supply: core: use device mutex wrappers
power: supply: bq27xxx: Fix registers of bq27426
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These add a common init function for arch-specific ACPI
initialization, clean up idle states initialization in the ACPI
processor_idle driver and update quirks:
- Introduce acpi_arch_init() for architecture-specific ACPI subsystem
initialization (Miao Wang)
- Clean up Asus quirks in acpi_quirk_skip_dmi_ids[] and add a quirk
to skip I2C clients on Acer Iconia One 8 A1-840 (Hans de Goede)
- Make the ACPI processor_idle driver use acpi_idle_play_dead() for
all idle states regardless of their types (Rafael Wysocki)"
* tag 'acpi-6.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: introduce acpi_arch_init()
ACPI: x86: Clean up Asus entries in acpi_quirk_skip_dmi_ids[]
ACPI: x86: Add skip i2c clients quirk for Acer Iconia One 8 A1-840
ACPI: processor_idle: Use acpi_idle_play_dead() for all C-states
|
|
Merge miscellaneous ACPI changes and x86-specific ACPI updates for
6.13-rc1:
- Introduce acpi_arch_init() for architecture-specific ACPI subsystem
initialization (Miao Wang).
- Clean up Asus quirks in acpi_quirk_skip_dmi_ids[] and add a quirk
to skip I2C clients on Acer Iconia One 8 A1-840 (Hans de Goede).
* acpi-misc:
ACPI: introduce acpi_arch_init()
* acpi-x86:
ACPI: x86: Clean up Asus entries in acpi_quirk_skip_dmi_ids[]
ACPI: x86: Add skip i2c clients quirk for Acer Iconia One 8 A1-840
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These mostly are updates of cpufreq drivers used on ARM platforms plus
one new DT-based cpufreq driver for virtualized guests and two cpuidle
changes that should not make any difference on systems currently in
the field, but will be needed for future development:
- Add virtual cpufreq driver for guest kernels (David Dai)
- Minor cleanup to various cpufreq drivers (Andy Shevchenko, Dhruva
Gole, Jie Zhan, Jinjie Ruan, Shuosheng Huang, Sibi Sankar, and Yuan
Can)
- Revert "cpufreq: brcmstb-avs-cpufreq: Fix initial command check"
(Colin Ian King)
- Improve DT bindings for qcom-hw driver (Dmitry Baryshkov, Konrad
Dybcio, and Nikunj Kela)
- Make cpuidle_play_dead() try all idle states with :enter_dead()
callbacks and change their return type to void (Rafael Wysocki)"
* tag 'pm-6.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits)
cpuidle: Change :enter_dead() driver callback return type to void
cpuidle: Do not return from cpuidle_play_dead() on callback failures
arm64: dts: qcom: sc8180x: Add a SoC-specific compatible to cpufreq-hw
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SC8180X compatible
cpufreq: sun50i: add a100 cpufreq support
cpufreq: mediatek-hw: Fix wrong return value in mtk_cpufreq_get_cpu_power()
cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_power()
cpufreq: CPPC: Fix wrong return value in cppc_get_cpu_cost()
cpufreq: loongson3: Check for error code from devm_mutex_init() call
cpufreq: scmi: Fix cleanup path when boost enablement fails
cpufreq: CPPC: Fix possible null-ptr-deref for cppc_get_cpu_cost()
cpufreq: CPPC: Fix possible null-ptr-deref for cpufreq_cpu_get_raw()
Revert "cpufreq: brcmstb-avs-cpufreq: Fix initial command check"
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SAR2130P compatible
cpufreq: add virtual-cpufreq driver
dt-bindings: cpufreq: add virtual cpufreq device
cpufreq: loongson2: Unregister platform_driver on failure
cpufreq: ti-cpufreq: Remove revision offsets in AM62 family
cpufreq: ti-cpufreq: Allow backward compatibility for efuse syscon
cppc_cpufreq: Remove HiSilicon CPPC workaround
...
|
|
To avoid arch-specific code in general ACPI initialization flow,
introduce a weak symbol acpi_arch_init().
Currently, arm64 and riscv can utillize this to insert their
arch-specific flow.
In the future, other architectures can also have a chance to define
their own arch-specific ACPI initialization process if necessary.
Reviewed-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Miao Wang <shankerwangmiao@gmail.com>
Link: https://patch.msgid.link/20241121-intro-acpi-arch-init-v4-1-b1fb517e7d8b@gmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Asus entries in the acpi_quirk_skip_dmi_ids[] table are the only
entries without a comment which model they apply to. Add these comments.
The Asus TF103C entry also is in the wrong place for what is supposed to
be an alphabetically sorted list. Move it up so that the list is properly
sorted and add a comment that the list is alphabetically sorted.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241116095825.11660-2-hdegoede@redhat.com
[ rjw: Changelog and subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Acer Iconia One 8 A1-840 (not to be confused with the A1-840FHD which
is a different model) ships with Android 4.4 as factory OS and has the
usual broken DSDT issues for x86 Android tablets.
Add quirks to skip ACPI I2C client enumeration and disable ACPI battery/AC
and ACPI GPIO event handlers.
Also add the "INT33F5" HID for the TI PMIC used on this tablet to the list
of HIDs for which not to skip i2c_client instantiation, since we do want
an ACPI instantiated i2c_client for the PMIC.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241116095825.11660-1-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Several new features and uAPI for iommufd:
- IOMMU_IOAS_MAP_FILE allows passing in a file descriptor as the
backing memory for an iommu mapping. To date VFIO/iommufd have used
VMA's and pin_user_pages(), this now allows using memfds and
memfd_pin_folios(). Notably this creates a pure folio path from the
memfd to the iommu page table where memory is never broken down to
PAGE_SIZE.
- IOMMU_IOAS_CHANGE_PROCESS moves the pinned page accounting between
two processes. Combined with the above this allows iommufd to
support a VMM re-start using exec() where something like qemu would
exec() a new version of itself and fd pass the memfds/iommufd/etc
to the new process. The memfd allows DMA access to the memory to
continue while the new process is getting setup, and the
CHANGE_PROCESS updates all the accounting.
- Support for fault reporting to userspace on non-PRI HW, such as ARM
stall-mode embedded devices.
- IOMMU_VIOMMU_ALLOC introduces the concept of a HW/driver backed
virtual iommu. This will be used by VMMs to access hardware
features that are contained with in a VM. The first use is to
inform the kernel of the virtual SID to physical SID mapping when
issuing SID based invalidation on ARM. Further uses will tie HW
features that are directly accessed by the VM, such as invalidation
queue assignment and others.
- IOMMU_VDEVICE_ALLOC informs the kernel about the mapping of virtual
device to physical device within a VIOMMU. Minimially this is used
to translate VM issued cache invalidation commands from virtual to
physical device IDs.
- Enhancements to IOMMU_HWPT_INVALIDATE and IOMMU_HWPT_ALLOC to work
with the VIOMMU
- ARM SMMuv3 support for nested translation. Using the VIOMMU and
VDEVICE the driver can model this HW's behavior for nested
translation. This includes a shared branch from Will"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (51 commits)
iommu/arm-smmu-v3: Import IOMMUFD module namespace
iommufd: IOMMU_IOAS_CHANGE_PROCESS selftest
iommufd: Add IOMMU_IOAS_CHANGE_PROCESS
iommufd: Lock all IOAS objects
iommufd: Export do_update_pinned
iommu/arm-smmu-v3: Support IOMMU_HWPT_INVALIDATE using a VIOMMU object
iommu/arm-smmu-v3: Allow ATS for IOMMU_DOMAIN_NESTED
iommu/arm-smmu-v3: Use S2FWB for NESTED domains
iommu/arm-smmu-v3: Support IOMMU_DOMAIN_NESTED
iommu/arm-smmu-v3: Support IOMMU_VIOMMU_ALLOC
Documentation: userspace-api: iommufd: Update vDEVICE
iommufd/selftest: Add vIOMMU coverage for IOMMU_HWPT_INVALIDATE ioctl
iommufd/selftest: Add IOMMU_TEST_OP_DEV_CHECK_CACHE test command
iommufd/selftest: Add mock_viommu_cache_invalidate
iommufd/viommu: Add iommufd_viommu_find_dev helper
iommu: Add iommu_copy_struct_from_full_user_array helper
iommufd: Allow hwpt_id to carry viommu_id for IOMMU_HWPT_INVALIDATE
iommu/viommu: Add cache_invalidate to iommufd_viommu_ops
iommufd/selftest: Add IOMMU_VDEVICE_ALLOC test coverage
iommufd/viommu: Add IOMMUFD_OBJ_VDEVICE and IOMMU_VDEVICE_ALLOC ioctl
...
|
|
After a previous change, cpuidle_play_dead(), which is the only caller
of idle state :enter_dead() callbacks, ignores their return values, so
they may as well be void.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/2285569.iZASKD2KPV@rjwysocki.net
|
|
Notice that acpi_processor_setup_cstates() can set state->enter_dead to acpi_idle_play_dead() for all C-states unconditionally and remove the
confusing C-state type check done before setting it.
No intentional functional impact.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com> # 6.12-rc7
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/2373563.ElGaqSPkdT@rjwysocki.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These include a couple of fixes, a new ACPI backlight quirk for Apple
MacbookPro11,2 and Air7,2 and a bunch of cleanups:
- Fix _CPC register setting issue for registers located in memory in
the ACPI CPPC library code (Lifeng Zheng)
- Use DEFINE_SIMPLE_DEV_PM_OPS in the ACPI battery driver, make it
use devm_ for initializing mutexes and allocating driver data, and
make it check the register_pm_notifier() return value (Thomas
Weißschuh, Andy Shevchenko)
- Make the ACPI EC driver support compile-time conditional and allow
ACPI to be built without CONFIG_HAS_IOPORT (Arnd Bergmann)
- Remove a redundant error check from the pfr_telemetry driver (Colin
Ian King)
- Rearrange the processor_perflib code in the ACPI processor driver
to avoid compiling x86-specific code on other architectures (Arnd
Bergmann)
- Add adev NULL check to acpi_quirk_skip_serdev_enumeration() and
make UART skip quirks work on PCI UARTs without an UID (Hans de
Goede)
- Force native backlight handling Apple MacbookPro11,2 and Air7,2 in
the ACPI video driver (Jonathan Denose)
- Switch several ACPI platform drivers back to using struct
platform_driver::remove() (Uwe Kleine-König)
- Replace strcpy() with strscpy() in multiple places in the ACPI
subsystem (Muhammad Qasim Abdul Majeed, Abdul Rahim)"
* tag 'acpi-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits)
ACPI: video: force native for Apple MacbookPro11,2 and Air7,2
ACPI: CPPC: Fix _CPC register setting issue
ACPI: Switch back to struct platform_driver::remove()
ACPI: x86: Add adev NULL check to acpi_quirk_skip_serdev_enumeration()
ACPI: x86: Make UART skip quirks work on PCI UARTs without an UID
ACPI: allow building without CONFIG_HAS_IOPORT
ACPI: processor_perflib: extend X86 dependency
ACPI: scan: Use strscpy() instead of strcpy()
ACPI: SBSHC: Use strscpy() instead of strcpy()
ACPI: SBS: Use strscpy() instead of strcpy()
ACPI: power: Use strscpy() instead of strcpy()
ACPI: pci_root: Use strscpy() instead of strcpy()
ACPI: pci_link: Use strscpy() instead of strcpy()
ACPI: event: Use strscpy() instead of strcpy()
ACPI: EC: Use strscpy() instead of strcpy()
ACPI: APD: Use strscpy() instead of strcpy()
ACPI: thermal: Use strscpy() instead of strcpy()
ACPI: battery: Check for error code from devm_mutex_init() call
ACPI: EC: make EC support compile-time conditional
ACPI: pfr_telemetry: remove redundant error check on ret
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Support for running Linux in a protected VM under the Arm
Confidential Compute Architecture (CCA)
- Guarded Control Stack user-space support. Current patches follow the
x86 ABI of implicitly creating a shadow stack on clone(). Subsequent
patches (already on the list) will add support for clone3() allowing
finer-grained control of the shadow stack size and placement from
libc
- AT_HWCAP3 support (not running out of HWCAP2 bits yet but we are
getting close with the upcoming dpISA support)
- Other arch features:
- In-kernel use of the memcpy instructions, FEAT_MOPS (previously
only exposed to user; uaccess support not merged yet)
- MTE: hugetlbfs support and the corresponding kselftests
- Optimise CRC32 using the PMULL instructions
- Support for FEAT_HAFT enabling ARCH_HAS_NONLEAF_PMD_YOUNG
- Optimise the kernel TLB flushing to use the range operations
- POE/pkey (permission overlays): further cleanups after bringing
the signal handler in line with the x86 behaviour for 6.12
- arm64 perf updates:
- Support for the NXP i.MX91 PMU in the existing IMX driver
- Support for Ampere SoCs in the Designware PCIe PMU driver
- Support for Marvell's 'PEM' PCIe PMU present in the 'Odyssey' SoC
- Support for Samsung's 'Mongoose' CPU PMU
- Support for PMUv3.9 finer-grained userspace counter access
control
- Switch back to platform_driver::remove() now that it returns
'void'
- Add some missing events for the CXL PMU driver
- Miscellaneous arm64 fixes/cleanups:
- Page table accessors cleanup: type updates, drop unused macros,
reorganise arch_make_huge_pte() and clean up pte_mkcont(), sanity
check addresses before runtime P4D/PUD folding
- Command line override for ID_AA64MMFR0_EL1.ECV (advertising the
FEAT_ECV for the generic timers) allowing Linux to boot with
firmware deployments that don't set SCTLR_EL3.ECVEn
- ACPI/arm64: tighten the check for the array of platform timer
structures and adjust the error handling procedure in
gtdt_parse_timer_block()
- Optimise the cache flush for the uprobes xol slot (skip if no
change) and other uprobes/kprobes cleanups
- Fix the context switching of tpidrro_el0 when kpti is enabled
- Dynamic shadow call stack fixes
- Sysreg updates
- Various arm64 kselftest improvements
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (168 commits)
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
kselftest/arm64: Try harder to generate different keys during PAC tests
kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all()
arm64/ptrace: Clarify documentation of VL configuration via ptrace
kselftest/arm64: Corrupt P0 in the irritator when testing SSVE
acpi/arm64: remove unnecessary cast
arm64/mm: Change protval as 'pteval_t' in map_range()
kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c
kselftest/arm64: Add FPMR coverage to fp-ptrace
kselftest/arm64: Expand the set of ZA writes fp-ptrace does
kselftets/arm64: Use flag bits for features in fp-ptrace assembler code
kselftest/arm64: Enable build of PAC tests with LLVM=1
kselftest/arm64: Check that SVCR is 0 in signal handlers
selftests/mm: Fix unused function warning for aarch64_write_signal_pkey()
kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests
kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test
kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests
kselftest/arm64: Fix build with stricter assemblers
arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux()
arm64/scs: Deal with 64-bit relative offsets in FDE frames
...
|
|
Merge miscellaneous ACPI changes for 6.13-rc1:
- Switch several ACPI platform drivers back to using struct
platform_driver::remove() (Uwe Kleine-König).
- Replace strcpy() with strscpy() in multiple places in the ACPI
subsystem (Muhammad Qasim Abdul Majeed, Abdul Rahim).
* acpi-misc:
ACPI: Switch back to struct platform_driver::remove()
ACPI: scan: Use strscpy() instead of strcpy()
ACPI: SBSHC: Use strscpy() instead of strcpy()
ACPI: SBS: Use strscpy() instead of strcpy()
ACPI: power: Use strscpy() instead of strcpy()
ACPI: pci_root: Use strscpy() instead of strcpy()
ACPI: pci_link: Use strscpy() instead of strcpy()
ACPI: event: Use strscpy() instead of strcpy()
ACPI: EC: Use strscpy() instead of strcpy()
ACPI: APD: Use strscpy() instead of strcpy()
ACPI: thermal: Use strscpy() instead of strcpy()
|
|
Merge and ACPI processor driver update, ACPI x86-specific code updates,
and an ACPI backlight (video) driver quirk for 6.13-rc1:
- Rearrange the processor_perflib code in the ACPI processor driver
to avoid compiling x86-specific code on other architectures (Arnd
Bergmann).
- Add adev NULL check to acpi_quirk_skip_serdev_enumeration() and
make UART skip quirks work on PCI UARTs without an UID (Hans de
Goede).
- Force native backlight handling Apple MacbookPro11,2 and Air7,2 in
the ACPI video driver (Jonathan Denose).
* acpi-processor:
ACPI: processor_perflib: extend X86 dependency
* acpi-x86:
ACPI: x86: Add adev NULL check to acpi_quirk_skip_serdev_enumeration()
ACPI: x86: Make UART skip quirks work on PCI UARTs without an UID
* acpi-video:
ACPI: video: force native for Apple MacbookPro11,2 and Air7,2
|
|
Merge updates of the ACPI battery and EC drivers, an ACPI Platform
Firmware Runtime (PFR) telemetry driver update and an ACPI OS support
layer change for 6.13-rc1:
- Use DEFINE_SIMPLE_DEV_PM_OPS in the ACPI battery driver, make it use
devm_ for initializing mutexes and allocating driver data, and make
it check the register_pm_notifier() return value (Thomas Weißschuh,
Andy Shevchenko).
- Make the ACPI EC driver support compile-time conditional and allow
ACPI to be built without CONFIG_HAS_IOPORT (Arnd Bergmann).
- Remove a redundant error check from the pfr_telemetry driver (Colin
Ian King).
* acpi-battery:
ACPI: battery: Check for error code from devm_mutex_init() call
ACPI: battery: use DEFINE_SIMPLE_DEV_PM_OPS
ACPI: battery: initialize mutexes through devm_ APIs
ACPI: battery: allocate driver data through devm_ APIs
ACPI: battery: check result of register_pm_notifier()
* acpi-ec:
ACPI: EC: make EC support compile-time conditional
* acpi-pfr:
ACPI: pfr_telemetry: remove redundant error check on ret
* acpi-osl:
ACPI: allow building without CONFIG_HAS_IOPORT
|
|
'for-next/tlb', 'for-next/misc', 'for-next/mte', 'for-next/sysreg', 'for-next/stacktrace', 'for-next/hwcap3', 'for-next/kselftest', 'for-next/crc32', 'for-next/guest-cca', 'for-next/haft' and 'for-next/scs', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf: Switch back to struct platform_driver::remove()
perf: arm_pmuv3: Add support for Samsung Mongoose PMU
dt-bindings: arm: pmu: Add Samsung Mongoose core compatible
perf/dwc_pcie: Fix typos in event names
perf/dwc_pcie: Add support for Ampere SoCs
ARM: pmuv3: Add missing write_pmuacr()
perf/marvell: Marvell PEM performance monitor support
perf/arm_pmuv3: Add PMUv3.9 per counter EL0 access control
perf/dwc_pcie: Convert the events with mixed case to lowercase
perf/cxlpmu: Support missing events in 3.1 spec
perf: imx_perf: add support for i.MX91 platform
dt-bindings: perf: fsl-imx-ddr: Add i.MX91 compatible
drivers perf: remove unused field pmu_node
* for-next/gcs: (42 commits)
: arm64 Guarded Control Stack user-space support
kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c
arm64/gcs: Fix outdated ptrace documentation
kselftest/arm64: Ensure stable names for GCS stress test results
kselftest/arm64: Validate that GCS push and write permissions work
kselftest/arm64: Enable GCS for the FP stress tests
kselftest/arm64: Add a GCS stress test
kselftest/arm64: Add GCS signal tests
kselftest/arm64: Add test coverage for GCS mode locking
kselftest/arm64: Add a GCS test program built with the system libc
kselftest/arm64: Add very basic GCS test program
kselftest/arm64: Always run signals tests with GCS enabled
kselftest/arm64: Allow signals tests to specify an expected si_code
kselftest/arm64: Add framework support for GCS to signal handling tests
kselftest/arm64: Add GCS as a detected feature in the signal tests
kselftest/arm64: Verify the GCS hwcap
arm64: Add Kconfig for Guarded Control Stack (GCS)
arm64/ptrace: Expose GCS via ptrace and core files
arm64/signal: Expose GCS state in signal frames
arm64/signal: Set up and restore the GCS context for signal handlers
arm64/mm: Implement map_shadow_stack()
...
* for-next/probes:
: Various arm64 uprobes/kprobes cleanups
arm64: insn: Simulate nop instruction for better uprobe performance
arm64: probes: Remove probe_opcode_t
arm64: probes: Cleanup kprobes endianness conversions
arm64: probes: Move kprobes-specific fields
arm64: probes: Fix uprobes for big-endian kernels
arm64: probes: Fix simulate_ldr*_literal()
arm64: probes: Remove broken LDR (literal) uprobe support
* for-next/asm-offsets:
: arm64 asm-offsets.c cleanup (remove unused offsets)
arm64: asm-offsets: remove PREEMPT_DISABLE_OFFSET
arm64: asm-offsets: remove DMA_{TO,FROM}_DEVICE
arm64: asm-offsets: remove VM_EXEC and PAGE_SZ
arm64: asm-offsets: remove MM_CONTEXT_ID
arm64: asm-offsets: remove COMPAT_{RT_,SIGFRAME_REGS_OFFSET
arm64: asm-offsets: remove VMA_VM_*
arm64: asm-offsets: remove TSK_ACTIVE_MM
* for-next/tlb:
: TLB flushing optimisations
arm64: optimize flush tlb kernel range
arm64: tlbflush: add __flush_tlb_range_limit_excess()
* for-next/misc:
: Miscellaneous patches
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
arm64/ptrace: Clarify documentation of VL configuration via ptrace
acpi/arm64: remove unnecessary cast
arm64/mm: Change protval as 'pteval_t' in map_range()
arm64: uprobes: Optimize cache flushes for xol slot
acpi/arm64: Adjust error handling procedure in gtdt_parse_timer_block()
arm64: fix .data.rel.ro size assertion when CONFIG_LTO_CLANG
arm64/ptdump: Test both PTE_TABLE_BIT and PTE_VALID for block mappings
arm64/mm: Sanity check PTE address before runtime P4D/PUD folding
arm64/mm: Drop setting PTE_TYPE_PAGE in pte_mkcont()
ACPI: GTDT: Tighten the check for the array of platform timer structures
arm64/fpsimd: Fix a typo
arm64: Expose ID_AA64ISAR1_EL1.XS to sanitised feature consumers
arm64: Return early when break handler is found on linked-list
arm64/mm: Re-organize arch_make_huge_pte()
arm64/mm: Drop _PROT_SECT_DEFAULT
arm64: Add command-line override for ID_AA64MMFR0_EL1.ECV
arm64: head: Drop SWAPPER_TABLE_SHIFT
arm64: cpufeature: add POE to cpucap_is_possible()
arm64/mm: Change pgattr_change_is_safe() arguments as pteval_t
* for-next/mte:
: Various MTE improvements
selftests: arm64: add hugetlb mte tests
hugetlb: arm64: add mte support
* for-next/sysreg:
: arm64 sysreg updates
arm64/sysreg: Update ID_AA64MMFR1_EL1 to DDI0601 2024-09
* for-next/stacktrace:
: arm64 stacktrace improvements
arm64: preserve pt_regs::stackframe during exec*()
arm64: stacktrace: unwind exception boundaries
arm64: stacktrace: split unwind_consume_stack()
arm64: stacktrace: report recovered PCs
arm64: stacktrace: report source of unwind data
arm64: stacktrace: move dump_backtrace() to kunwind_stack_walk()
arm64: use a common struct frame_record
arm64: pt_regs: swap 'unused' and 'pmr' fields
arm64: pt_regs: rename "pmr_save" -> "pmr"
arm64: pt_regs: remove stale big-endian layout
arm64: pt_regs: assert pt_regs is a multiple of 16 bytes
* for-next/hwcap3:
: Add AT_HWCAP3 support for arm64 (also wire up AT_HWCAP4)
arm64: Support AT_HWCAP3
binfmt_elf: Wire up AT_HWCAP3 at AT_HWCAP4
* for-next/kselftest: (30 commits)
: arm64 kselftest fixes/cleanups
kselftest/arm64: Try harder to generate different keys during PAC tests
kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all()
kselftest/arm64: Corrupt P0 in the irritator when testing SSVE
kselftest/arm64: Add FPMR coverage to fp-ptrace
kselftest/arm64: Expand the set of ZA writes fp-ptrace does
kselftets/arm64: Use flag bits for features in fp-ptrace assembler code
kselftest/arm64: Enable build of PAC tests with LLVM=1
kselftest/arm64: Check that SVCR is 0 in signal handlers
kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests
kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test
kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests
kselftest/arm64: Fix build with stricter assemblers
kselftest/arm64: Test signal handler state modification in fp-stress
kselftest/arm64: Provide a SIGUSR1 handler in the kernel mode FP stress test
kselftest/arm64: Implement irritators for ZA and ZT
kselftest/arm64: Remove unused ADRs from irritator handlers
kselftest/arm64: Correct misleading comments on fp-stress irritators
kselftest/arm64: Poll less often while waiting for fp-stress children
kselftest/arm64: Increase frequency of signal delivery in fp-stress
kselftest/arm64: Fix encoding for SVE B16B16 test
...
* for-next/crc32:
: Optimise CRC32 using PMULL instructions
arm64/crc32: Implement 4-way interleave using PMULL
arm64/crc32: Reorganize bit/byte ordering macros
arm64/lib: Handle CRC-32 alternative in C code
* for-next/guest-cca:
: Support for running Linux as a guest in Arm CCA
arm64: Document Arm Confidential Compute
virt: arm-cca-guest: TSM_REPORT support for realms
arm64: Enable memory encrypt for Realms
arm64: mm: Avoid TLBI when marking pages as valid
arm64: Enforce bounce buffers for realm DMA
efi: arm64: Map Device with Prot Shared
arm64: rsi: Map unprotected MMIO as decrypted
arm64: rsi: Add support for checking whether an MMIO is protected
arm64: realm: Query IPA size from the RMM
arm64: Detect if in a realm and set RIPAS RAM
arm64: rsi: Add RSI definitions
* for-next/haft:
: Support for arm64 FEAT_HAFT
arm64: pgtable: Warn unexpected pmdp_test_and_clear_young()
arm64: Enable ARCH_HAS_NONLEAF_PMD_YOUNG
arm64: Add support for FEAT_HAFT
arm64: setup: name 'tcr2' register
arm64/sysreg: Update ID_AA64MMFR1_EL1 register
* for-next/scs:
: Dynamic shadow call stack fixes
arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux()
arm64/scs: Deal with 64-bit relative offsets in FDE frames
arm64/scs: Fix handling of DWARF augmentation data in CIE/FDE frames
|
|
There is a bug in the Macbook Pro 11,2 and Air 7,2 firmware similar to
what is described in:
commit 7dc918daaf29 ("ACPI: video: force native for Apple MacbookPro9,2")
This bug causes their backlights not to come back after resume.
Add DMI quirks to select the working native Intel firmware interface
such that the backlght comes back on after resume.
Signed-off-by: Jonathan Denose <jdenose@google.com>
Link: https://patch.msgid.link/20241112222516.1.I7fa78e6acbbed56ed5677f5e2dacc098a269d955@changeid
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since commit 60949b7b8054 ("ACPI: CPPC: Fix MASK_VAL() usage"), _CPC
registers cannot be changed from 1 to 0.
It turns out that there is an extra OR after MASK_VAL_WRITE(), which
has already ORed prev_val with the register mask.
Remove the extra OR to fix the problem.
Fixes: 60949b7b8054 ("ACPI: CPPC: Fix MASK_VAL() usage")
Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20241113103309.761031-1-zhenglifeng1@huawei.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/acpi to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/9ee1a9813f53698be62aab9d810b2d97a2a9f186.1731397722.git.u.kleine-koenig@baylibre.com
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
acpi_dev_hid_match() does not check for adev == NULL, dereferencing
it unconditional.
Add a check for adev being NULL before calling acpi_dev_hid_match().
At the moment acpi_quirk_skip_serdev_enumeration() is never called with
a controller_parent without an ACPI companion, but better safe than sorry.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241109220028.83047-1-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Vexia EDU ATLA 10 tablet (9V version) which shipped with Android 4.2
as factory OS has the usual broken DSDT issues for x86 Android tablets.
On top of that this tablet is special because all its LPSS island
peripherals are enumerated as PCI devices rather then as ACPI devices as
they typically are.
For the x86-android-tablets kmod to be able to instantiate a serdev client
for the Bluetooth HCI on this tablet, an ACPI_QUIRK_UART1_SKIP quirk is
necessary.
Modify acpi_dmi_skip_serdev_enumeration() to work with PCI enumerated
UARTs without an UID, such as the UARTs on this tablet.
Also make acpi_dmi_skip_serdev_enumeration() exit early if there are no
quirks, since there is nothing to do then.
And add the necessary quirks for the Vexia EDU ATLA 10 tablet.
This should compile with CONFIG_PCI being unset without issues because
dev_is_pci() is defined as "(false)" then.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241109215936.83004-1-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
DEFINE_RES_IRQ returns struct resource type, so it is
unnecessary to cast it to struct resource.
Remove the unnecessary cast to fix the following sparse warnings:
drivers/acpi/arm64/gtdt.c:355:19: sparse: warning: cast to non-scalar
drivers/acpi/arm64/gtdt.c:355:19: sparse: warning: cast from non-scalar
No functional changes intended.
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240917233827.73167-1-minhuadotchen@gmail.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
|
|
In case of error in gtdt_parse_timer_block() invalid 'gtdt_frame'
will be used in 'do {} while (i-- >= 0 && gtdt_frame--);' statement block
because do{} block will be executed even if 'i == 0'.
Adjust error handling procedure by replacing 'i-- >= 0' with 'i-- > 0'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a712c3ed9b8a ("acpi/arm64: Add memory-mapped timer support in GTDT driver")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Aleksandr Mishin <amishin@t-argos.ru>
Link: https://lore.kernel.org/r/20240827101239.22020-1-amishin@t-argos.ru
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
arch_init_invariance_cppc() is called at the end of
acpi_cppc_processor_probe() in order to configure frequency invariance
based upon the values from _CPC.
This however doesn't work on AMD CPPC shared memory designs that have
AMD preferred cores enabled because _CPC needs to be analyzed from all
cores to judge if preferred cores are enabled.
This issue manifests to users as a warning since commit 21fb59ab4b97
("ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn"):
```
Could not retrieve highest performance (-19)
```
However the warning isn't the cause of this, it was actually
commit 279f838a61f9 ("x86/amd: Detect preferred cores in
amd_get_boost_ratio_numerator()") which exposed the issue.
To fix this problem, change arch_init_invariance_cppc() into a new weak
symbol that is called at the end of acpi_processor_driver_init().
Each architecture that supports it can declare the symbol to override
the weak one.
Define it for x86, in arch/x86/kernel/acpi/cppc.c, and for all of the
architectures using the generic arch_topology.c code.
Fixes: 279f838a61f9 ("x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()")
Reported-by: Ivan Shapovalov <intelfx@intelfx.name>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219431
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20241104222855.3959267-1-superm1@kernel.org
[ rjw: Changelog edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
CONFIG_HAS_IOPORT will soon become optional and cause a build time
failure when it is disabled but a driver calls inb()/outb(). At the
moment, all architectures that can support ACPI have port I/O, but this
is not necessarily the case in the future on non-x86 architectures.
The result is a set of errors like:
drivers/acpi/osl.c: In function 'acpi_os_read_port':
include/asm-generic/io.h:542:14: error: call to '_inb' declared with attribute error: inb()) requires CONFIG_HAS_IOPORT
Nothing should actually call these functions in this configuration,
and if it does, the result would be undefined behavior today, possibly
a NULL pointer dereference.
Change the low-level functions to return a proper error code when
HAS_IOPORT is disabled.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241030123701.1538919-2-arnd@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The majority of the processor_perflib code is only used by cpufreq
drivers on the x86 architecture and makes no sense without the
x86 SMI interactions that rely on I/O port access.
Replace the existing #ifdef checks with one that covers all of the
code that is only used by x86 drivers, saving a little bit
of kernel code size on other architectures.
There is likely more code under CONFIG_ACPI_PROCESSOR that falls
into this category, but changing those would require a larger
rework.
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20241030123701.1538919-1-arnd@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace strcpy() with strscpy() in the ACPI device enumeration code.
strcpy() has been deprecated because it is generally unsafe, so it
is better to eliminate it from the kernel source.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Muhammad Qasim Abdul Majeed <qasim.majeed20@gmail.com>
Link: https://patch.msgid.link/20240915183822.34588-9-qasim.majeed20@gmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace strcpy() with strscpy() in the ACPI SBSHC driver.
strcpy() has been deprecated because it is generally unsafe, so it
is better to eliminate it from the kernel source.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Muhammad Qasim Abdul Majeed <qasim.majeed20@gmail.com>
Link: https://patch.msgid.link/20240915183822.34588-8-qasim.majeed20@gmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace strcpy() with strscpy() in the ACPI SBS driver.
strcpy() has been deprecated because it is generally unsafe, so it
is better to eliminate it from the kernel source.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Muhammad Qasim Abdul Majeed <qasim.majeed20@gmail.com>
Link: https://patch.msgid.link/20240915183822.34588-7-qasim.majeed20@gmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace strcpy() with strscpy() in the ACPI power resource driver.
strcpy() has been deprecated because it is generally unsafe, so it
is better to eliminate it from the kernel source.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Muhammad Qasim Abdul Majeed <qasim.majeed20@gmail.com>
Link: https://patch.msgid.link/20240915183822.34588-6-qasim.majeed20@gmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace strcpy() with strscpy() in the ACPI pci_root driver.
strcpy() has been deprecated because it is generally unsafe, so it
is better to eliminate it from the kernel source.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Muhammad Qasim Abdul Majeed <qasim.majeed20@gmail.com>
Link: https://patch.msgid.link/20240915183822.34588-5-qasim.majeed20@gmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace strcpy() with strscpy() in the ACPI pci_link driver.
strcpy() has been deprecated because it is generally unsafe, so it
is better to eliminate it from the kernel source.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Muhammad Qasim Abdul Majeed <qasim.majeed20@gmail.com>
Link: https://patch.msgid.link/20240915183822.34588-4-qasim.majeed20@gmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace strcpy() with strscpy() in the ACPI event driver.
strcpy() has been deprecated because it is generally unsafe, so it
is better to eliminate it from the kernel source.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Muhammad Qasim Abdul Majeed <qasim.majeed20@gmail.com>
Link: https://patch.msgid.link/20240915183822.34588-3-qasim.majeed20@gmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace strcpy() with strscpy() in the ACPI EC driver.
strcpy() has been deprecated because it is generally unsafe, so it
is better to eliminate it from the kernel source.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Muhammad Qasim Abdul Majeed <qasim.majeed20@gmail.com>
Link: https://patch.msgid.link/20240915183822.34588-2-qasim.majeed20@gmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace strcpy() with strscpy() in the ACPI APD driver.
strcpy() has been deprecated because it is generally unsafe, so it
is better to eliminate it from the kernel source.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Muhammad Qasim Abdul Majeed <qasim.majeed20@gmail.com>
Link: https://patch.msgid.link/20240915183822.34588-1-qasim.majeed20@gmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
strcpy() is generally considered unsafe and use of strscpy() is
recommended [1].
Also using strscpy() instead of strcpy() makes the following checkpatch
warning go away:
WARNING: Prefer strscpy over strcpy
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy [1]
Signed-off-by: Abdul Rahim <abdul.rahim@myyahoo.com>
Link: https://patch.msgid.link/20240913211156.103864-1-abdul.rahim@myyahoo.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The IORT spec, Issue E.f (April 2024), adds a new CANWBS bit to the Memory
Access Flag field in the Memory Access Properties table, mainly for a PCI
Root Complex.
This CANWBS defines the coherency of memory accesses to be not marked IOWB
cacheable/shareable. Its value further implies the coherency impact from a
pair of mismatched memory attributes (e.g. in a nested translation case):
0x0: Use of mismatched memory attributes for accesses made by this
device may lead to a loss of coherency.
0x1: Coherency of accesses made by this device to locations in
Conventional memory are ensured as follows, even if the memory
attributes for the accesses presented by the device or provided by
the SMMU are different from Inner and Outer Write-back cacheable,
Shareable.
Note that the loss of coherency on a CANWBS-unsupported HW typically could
occur to an SMMU that doesn't implement the S2FWB feature where additional
cache flush operations would be required to prevent that from happening.
Add a new ACPI_IORT_MF_CANWBS flag and set IOMMU_FWSPEC_PCI_RC_CANWBS upon
the presence of this new flag.
CANWBS and S2FWB are similar features, in that they both guarantee the VM
can not violate coherency, however S2FWB can be bypassed by PCI No Snoop
TLPs, while CANWBS cannot. Thus CANWBS meets the requirements to set
IOMMU_CAP_ENFORCE_CACHE_COHERENCY.
Architecturally ARM has expected that VFIO would disable No Snoop through
PCI Config space, if this is done then the two would have the same
protections.
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v4-9e99b76f3518+3a8-smmuv3_nesting_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Even if it's not critical, the avoidance of checking the error code
from devm_mutex_init() call today diminishes the point of using devm
variant of it. Tomorrow it may even leak something. Add the missed
check.
Fixes: 0710c1ce5045 ("ACPI: battery: initialize mutexes through devm_ APIs")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20241030162754.2110946-1-andriy.shevchenko@linux.intel.com
[ rjw: Added 2 empty code lines ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
As suggested by Marc and Lorenzo, first we need to check whether the
platform_timer entry pointer is within gtdt bounds (< gtdt_end) before
de-referencing what it points at to detect the length of the platform
timer struct and then check that the length of current platform_timer
struct is also valid, i.e. the length is not zero and within gtdt_end.
Now next_platform_timer() only checks against gtdt_end for the entry of
subsequent platform timer without checking the length of it and will
not report error if the check failed and the existing check in function
acpi_gtdt_init() is also not enough.
Modify the for_each_platform_timer() iterator and use it combined with
a dedicated check function platform_timer_valid() to do the check
against table length (gtdt_end) for each element of platform timer
array in function acpi_gtdt_init(), making sure that both their entry
and length actually fit in the table.
Suggested-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Co-developed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://lore.kernel.org/r/20241016095458.34126-1-zhengzengkai@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The following BUG was triggered:
=============================
[ BUG: Invalid wait context ]
6.12.0-rc2-XXX #406 Not tainted
-----------------------------
kworker/1:1/62 is trying to lock:
ffffff8801593030 (&cpc_ptr->rmw_lock){+.+.}-{3:3}, at: cpc_write+0xcc/0x370
other info that might help us debug this:
context-{5:5}
2 locks held by kworker/1:1/62:
#0: ffffff897ef5ec98 (&rq->__lock){-.-.}-{2:2}, at: raw_spin_rq_lock_nested+0x2c/0x50
#1: ffffff880154e238 (&sg_policy->update_lock){....}-{2:2}, at: sugov_update_shared+0x3c/0x280
stack backtrace:
CPU: 1 UID: 0 PID: 62 Comm: kworker/1:1 Not tainted 6.12.0-rc2-g9654bd3e8806 #406
Workqueue: 0x0 (events)
Call trace:
dump_backtrace+0xa4/0x130
show_stack+0x20/0x38
dump_stack_lvl+0x90/0xd0
dump_stack+0x18/0x28
__lock_acquire+0x480/0x1ad8
lock_acquire+0x114/0x310
_raw_spin_lock+0x50/0x70
cpc_write+0xcc/0x370
cppc_set_perf+0xa0/0x3a8
cppc_cpufreq_fast_switch+0x40/0xc0
cpufreq_driver_fast_switch+0x4c/0x218
sugov_update_shared+0x234/0x280
update_load_avg+0x6ec/0x7b8
dequeue_entities+0x108/0x830
dequeue_task_fair+0x58/0x408
__schedule+0x4f0/0x1070
schedule+0x54/0x130
worker_thread+0xc0/0x2e8
kthread+0x130/0x148
ret_from_fork+0x10/0x20
sugov_update_shared() locks a raw_spinlock while cpc_write() locks a
spinlock.
To have a correct wait-type order, update rmw_lock to a raw spinlock and
ensure that interrupts will be disabled on the CPU holding it.
Fixes: 60949b7b8054 ("ACPI: CPPC: Fix MASK_VAL() usage")
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://patch.msgid.link/20241028125657.1271512-1-pierre.gondois@arm.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix an ACPI PRM (Platform Runtime Mechanism) issue and add two
new DMI quirks, one for an ACPI IRQ override and one for lid switch
detection:
- Make acpi_parse_prmt() look for EFI_MEMORY_RUNTIME memory regions
only to comply with the UEFI specification and make PRM use
efi_guid_t instead of guid_t to avoid a compiler warning triggered
by that change (Koba Ko, Dan Carpenter)
- Add an ACPI IRQ override quirk for LG 16T90SP (Christian Heusel)
- Add a lid switch detection quirk for Samsung Galaxy Book2 (Shubham
Panwar)"
* tag 'acpi-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PRM: Clean up guid type in struct prm_handler_info
ACPI: button: Add DMI quirk for Samsung Galaxy Book2 to fix initial lid detection issue
ACPI: resource: Add LG 16T90SP to irq1_level_low_skip_override[]
ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM handler and context
|
|
Merge new DMI quirks for 6.12-rc5:
- Add an ACPI IRQ override quirk for LG 16T90SP (Christian Heusel).
- Add a lid switch detection quirk for Samsung Galaxy Book2 (Shubham
Panwar).
* acpi-resource:
ACPI: resource: Add LG 16T90SP to irq1_level_low_skip_override[]
* acpi-button:
ACPI: button: Add DMI quirk for Samsung Galaxy Book2 to fix initial lid detection issue
|
|
The embedded controller code is mainly used on x86 laptops and cannot
work without PC style I/O port access.
Make this a user-visible configuration option that is default enabled
on x86 but otherwise disabled, and that can never be enabled unless
CONFIG_HAS_IOPORT is also available.
The empty stubs in internal.h help ignore the EC code in configurations
that don't support it. In order to see those stubs, the sbshc code also
has to include this header and drop duplicate declarations.
All the direct callers of ec_read/ec_write already had an x86
dependency and now also need to depend on APCI_EC.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241011061948.3211423-1-arnd@kernel.org
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The variable ret is initialized to zero and a littler later in
the PFRT_LOG_IOC_GET_INFO case of a switch statement is being checked
for negative error value. Since ret has not been re-assigned since
the initialization ret can never be less than zero so the check is
redundant and can be removed. Remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20241014130522.1986428-1-colin.i.king@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When the nominal_freq recorded by the kernel is equal to the lowest_freq,
and the frequency adjustment operation is triggered externally, there is
a logic error in cppc_perf_to_khz()/cppc_khz_to_perf(), resulting in perf
and khz conversion errors.
Fix this by adding a branch processing logic when nominal_freq is equal
to lowest_freq.
Fixes: ec1c7ad47664 ("cpufreq: CPPC: Fix performance/frequency conversion")
Signed-off-by: liwei <liwei728@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/20241024022952.2627694-1-liwei728@huawei.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Clang 19 prints a warning when we pass &th->guid to efi_pa_va_lookup():
drivers/acpi/prmt.c:156:29: error: passing 1-byte aligned argument to
4-byte aligned parameter 1 of 'efi_pa_va_lookup' may result in an
unaligned pointer access [-Werror,-Walign-mismatch]
156 | (void *)efi_pa_va_lookup(&th->guid, handler_info->handler_address);
| ^
The problem is that efi_pa_va_lookup() takes a efi_guid_t and &th->guid
is a regular guid_t. The difference between the two types is the
alignment. efi_guid_t is a typedef.
typedef guid_t efi_guid_t __aligned(__alignof__(u32));
It's possible that this a bug in Clang 19. Even though the alignment of
&th->guid is not explicitly specified, it will still end up being aligned
at 4 or 8 bytes.
Anyway, as Ard points out, it's cleaner to change guid to efi_guid_t type
and that also makes the warning go away.
Fixes: 088984c8d54c ("ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM handler and context")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/3777d71b-9e19-45f4-be4e-17bf4fa7a834@stanley.mountain
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
