| Age | Commit message (Collapse) | Author |
|---|
|
The return value of xa_store() needs to be checked. This fix adds an
error handling path that resolves the kref inconsistency on failure. As
suggested by Oliver Upton, this function does not return the error code
intentionally because the translation cache is best effort.
Fixes: 8201d1028caa ("KVM: arm64: vgic-its: Maintain a translation cache per ITS")
Signed-off-by: Keisuke Nishimura <keisuke.nishimura@inria.fr>
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241130144952.23729-1-keisuke.nishimura@inria.fr
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Catalin reports that a hypervisor lying to a guest about the size
of the ASID field may result in unexpected issues:
- if the underlying HW does only supports 8 bit ASIDs, the ASID
field in a TLBI VAE1* operation is only 8 bits, and the HW will
ignore the other 8 bits
- if on the contrary the HW is 16 bit capable, the ASID field
in the same TLBI operation is always 16 bits, irrespective of
the value of TCR_ELx.AS.
This could lead to missed invalidations if the guest was lead to
assume that the HW had 8 bit ASIDs while they really are 16 bit wide.
In order to avoid any potential disaster that would be hard to debug,
prenent the migration between a host with 8 bit ASIDs to one with
wider ASIDs (the converse was obviously always forbidden). This is
also consistent with what we already do for VMIDs.
If it becomes absolutely mandatory to support such a migration path
in the future, we will have to trap and emulate all TLBIs, something
that nobody should look forward to.
Fixes: d5a32b60dc18 ("KVM: arm64: Allow userspace to change ID_AA64MMFR{0-2}_EL1")
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20241203190236.505759-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The G.a revision of the ARM ARM had it pretty clear that HCR_EL2.FWB
had no influence on "The way that stage 1 memory types and attributes
are combined with stage 2 Device type and attributes." (D5.5.5).
However, this wording was lost in further revisions of the architecture.
Restore the intended behaviour, which is to take the strongest memory
type of S1 and S2 in this case, as if FWB was 0. The specification is
being fixed accordingly.
Fixes: be04cebf3e788 ("KVM: arm64: nv: Add emulation of AT S12E{0,1}{R,W}")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241125094756.609590-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Since the linked fixes commit, these masks are already shifted so remove
the shifts. One issue that this fixes is SPE and TRBE not being
available anymore:
arm_spe_pmu arm,spe-v1: profiling buffer owned by higher exception level
Fixes: 641630313e9c ("arm64: sysreg: Migrate MDCR_EL2 definition to table")
Signed-off-by: James Clark <james.clark@linaro.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241122164636.2944180-1-james.clark@linaro.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The 'global enable control' (as it is termed in the architecture) for
counters reserved by EL2 is MDCR_EL2.HPME. Use that instead of
PMCR_EL0.E when evaluating the overflow state for hyp counters.
Change the return value to a bool while at it, which better reflects the
fact that the overflow state is a shared signal and not a per-counter
property.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241120005230.2335682-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
DDI0487K.a D13.3.1 describes the PMU overflow condition, which evaluates
to true if any counter's global enable (PMCR_EL0.E), overflow flag
(PMOVSSET_EL0[n]), and interrupt enable (PMINTENSET_EL1[n]) are all 1.
Of note, this does not require a counter to be enabled
(i.e. PMCNTENSET_EL0[n] = 1) to generate an overflow.
Align kvm_pmu_overflow_status() with the reality of the architecture
and stop using PMCNTENSET_EL0 as part of the overflow condition. The
bug was discovered while running an SBSA PMU test [*], which only sets
PMCR.E, PMOVSSET<0>, PMINTENSET<0>, and expects an overflow interrupt.
Cc: stable@vger.kernel.org
Fixes: 76d883c4e640 ("arm64: KVM: Add access handler for PMOVSSET and PMOVSCLR register")
Link: https://github.com/ARM-software/sbsa-acs/blob/master/test_pool/pmu/operating_system/test_pmu001.c
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
[ oliver: massaged changelog ]
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241120005230.2335682-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
When compiling with CONFIG_CC_OPTIMIZE_FOR_SIZE=y, set_sysreg_masks()
fails to compile thanks to:
BUILD_BUG_ON(!__builtin_constant_p(sr));
as the compiler doesn't identify sr as a constant, despite all the
callers passing constants.
Fix the issue by always inlining this function, which allows GCC to
do the right thing.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411201857.ZNudtGJl-lkp@intel.com/
Fixes: a0162020095e2 ("KVM: arm64: Extend masking facility to arbitrary registers")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20241120111516.304250-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The ITS ABI infrastructure allows for some pretty lax code, where
the size of the data doesn't have to match the size of the entry,
potentially leading to a collection of interesting bugs.
Commit 7fe28d7e68f9 ("KVM: arm64: vgic-its: Add a data length check
in vgic_its_save_*") added some checks, but starts by implicitly
casting all writes to a 64bit value, hiding some of the issues.
Instead, introduce macros that will check the data type actually used
for dealing with the table entries. The macros are taking a symbolic
entry type that is used to fetch the size of the entry type for the
current ABI. This immediately catches a couple of low-impact gotchas
(zero values that are implicitly 32bit), easy enough to fix.
Given that we currently only have a single ABI, hardcode a couple of
BUILD_BUG_ON()s that will fire if we use anything but a 64bit quantity,
and some (currently unreachable) fallback code that may become useful
one day.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241117165757.247686-5-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
VGIC_MAX_PRIVATE is a pretty useless definition, and is better
replaced with VGIC_NR_PRIVATE_IRQS.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241117165757.247686-4-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
vgic_get_irq() has an awkward signature, as it takes both a kvm
*and* a vcpu, where the vcpu is allowed to be NULL if the INTID
being looked up is a global interrupt (SPI or LPI).
This leads to potentially problematic situations where the INTID
passed is a private interrupt, but that there is no vcpu.
In order to make things less ambiguous, let have *two* helpers
instead:
- vgic_get_irq(struct kvm *kvm, u32 intid), which is only concerned
with *global* interrupts, as indicated by the lack of vcpu.
- vgic_get_vcpu_irq(struct kvm_vcpu *vcpu, u32 intid), which can
return *any* interrupt class, but must have of course a non-NULL
vcpu.
Most of the code nicely falls under one or the other situations,
except for a couple of cases (close to the UABI or in the debug code)
where we have to distinguish between the two cases.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241117165757.247686-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Make sure we filter out non-LPI invalidation when handling writes
to GICR_INVLPIR.
Fixes: 4645d11f4a553 ("KVM: arm64: vgic-v3: Implement MMIO-based LPI invalidation")
Reported-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241117165757.247686-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
This function can fail but its return value isn't passed onto the
caller. Presumably this could result in a broken state.
Fixes: 66d5b53e20a6 ("KVM: arm64: Allocate memory mapped at hyp for host sve state in pKVM")
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241112105604.795809-1-james.clark@linaro.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/vgic-its-fixes:
: Fixes for vgic-its save/restore, courtesy of Kunkun Jiang and Jing Zhang
:
: Address bugs where restoring an ITS consumes a stale DTE/ITE, which
: may lead to either garbage mappings in the ITS or the overall restore
: ioctl failing. The fix in both cases is to zero a DTE/ITE when its
: translation has been invalidated by the guest.
KVM: arm64: vgic-its: Clear ITE when DISCARD frees an ITE
KVM: arm64: vgic-its: Clear DTE when MAPD unmaps a device
KVM: arm64: vgic-its: Add a data length check in vgic_its_save_*
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
When DISCARD frees an ITE, it does not invalidate the
corresponding ITE. In the scenario of continuous saves and
restores, there may be a situation where an ITE is not saved
but is restored. This is unreasonable and may cause restore
to fail. This patch clears the corresponding ITE when DISCARD
frees an ITE.
Cc: stable@vger.kernel.org
Fixes: eff484e0298d ("KVM: arm64: vgic-its: ITT save and restore")
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
[Jing: Update with entry write helper]
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Link: https://lore.kernel.org/r/20241107214137.428439-6-jingzhangos@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
vgic_its_save_device_tables will traverse its->device_list to
save DTE for each device. vgic_its_restore_device_tables will
traverse each entry of device table and check if it is valid.
Restore if valid.
But when MAPD unmaps a device, it does not invalidate the
corresponding DTE. In the scenario of continuous saves
and restores, there may be a situation where a device's DTE
is not saved but is restored. This is unreasonable and may
cause restore to fail. This patch clears the corresponding
DTE when MAPD unmaps a device.
Cc: stable@vger.kernel.org
Fixes: 57a9a117154c ("KVM: arm64: vgic-its: Device table save/restore")
Co-developed-by: Shusen Li <lishusen2@huawei.com>
Signed-off-by: Shusen Li <lishusen2@huawei.com>
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
[Jing: Update with entry write helper]
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Link: https://lore.kernel.org/r/20241107214137.428439-5-jingzhangos@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
In all the vgic_its_save_*() functinos, they do not check whether
the data length is 8 bytes before calling vgic_write_guest_lock.
This patch adds the check. To prevent the kernel from being blown up
when the fault occurs, KVM_BUG_ON() is used. And the other BUG_ON()s
are replaced together.
Cc: stable@vger.kernel.org
Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com>
[Jing: Update with the new entry read/write helpers]
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Link: https://lore.kernel.org/r/20241107214137.428439-4-jingzhangos@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/nv-pmu:
: Support for vEL2 PMU controls
:
: Align the vEL2 PMU support with the current state of non-nested KVM,
: including:
:
: - Trap routing, with the annoying complication of EL2 traps that apply
: in Host EL0
:
: - PMU emulation, using the correct configuration bits depending on
: whether a counter falls in the hypervisor or guest range of PMCs
:
: - Perf event swizzling across nested boundaries, as the event filtering
: needs to be remapped to cope with vEL2
KVM: arm64: nv: Reprogram PMU events affected by nested transition
KVM: arm64: nv: Apply EL2 event filtering when in hyp context
KVM: arm64: nv: Honor MDCR_EL2.HLP
KVM: arm64: nv: Honor MDCR_EL2.HPME
KVM: arm64: Add helpers to determine if PMC counts at a given EL
KVM: arm64: nv: Adjust range of accessible PMCs according to HPMN
KVM: arm64: Rename kvm_pmu_valid_counter_mask()
KVM: arm64: nv: Advertise support for FEAT_HPMN0
KVM: arm64: nv: Describe trap behaviour of MDCR_EL2.HPMN
KVM: arm64: nv: Honor MDCR_EL2.{TPM, TPMCR} in Host EL0
KVM: arm64: nv: Reinject traps that take effect in Host EL0
KVM: arm64: nv: Rename BEHAVE_FORWARD_ANY
KVM: arm64: nv: Allow coarse-grained trap combos to use complex traps
KVM: arm64: Describe RES0/RES1 bits of MDCR_EL2
arm64: sysreg: Add new definitions for ID_AA64DFR0_EL1
arm64: sysreg: Migrate MDCR_EL2 definition to table
arm64: sysreg: Describe ID_AA64DFR2_EL1 fields
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/mmio-sea:
: Fix for SEA injection in response to MMIO
:
: Fix + test coverage for SEA injection in response to an unhandled MMIO
: exit to userspace. Naturally, if userspace decides to abort an MMIO
: instruction KVM shouldn't continue with instruction emulation...
KVM: arm64: selftests: Add tests for MMIO external abort injection
KVM: arm64: selftests: Convert to kernel's ESR terminology
tools: arm64: Grab a copy of esr.h from kernel
KVM: arm64: Don't retire aborted MMIO instruction
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/misc:
: Miscellaneous updates
:
: - Drop useless check against vgic state in ICC_CLTR_EL1.SEIS read
: emulation
:
: - Fix trap configuration for pKVM
:
: - Close the door on initialization bugs surrounding userspace irqchip
: static key by removing it.
KVM: selftests: Don't bother deleting memslots in KVM when freeing VMs
KVM: arm64: Get rid of userspace_irqchip_in_use
KVM: arm64: Initialize trap register values in hyp in pKVM
KVM: arm64: Initialize the hypervisor's VM state at EL2
KVM: arm64: Refactor kvm_vcpu_enable_ptrauth() for hyp use
KVM: arm64: Move pkvm_vcpu_init_traps() to init_pkvm_hyp_vcpu()
KVM: arm64: Don't map 'kvm_vgic_global_state' at EL2 with pKVM
KVM: arm64: Just advertise SEIS as 0 when emulating ICC_CTLR_EL1
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/mpam-ni:
: Hiding FEAT_MPAM from KVM guests, courtesy of James Morse + Joey Gouly
:
: Fix a longstanding bug where FEAT_MPAM was accidentally exposed to KVM
: guests + the EL2 trap configuration was not explicitly configured. As
: part of this, bring in skeletal support for initialising the MPAM CPU
: context so KVM can actually set traps for its guests.
:
: Be warned -- if this series leads to boot failures on your system,
: you're running on turd firmware.
:
: As an added bonus (that builds upon the infrastructure added by the MPAM
: series), allow userspace to configure CTR_EL0.L1Ip, courtesy of Shameer
: Kolothum.
KVM: arm64: Make L1Ip feature in CTR_EL0 writable from userspace
KVM: arm64: selftests: Test ID_AA64PFR0.MPAM isn't completely ignored
KVM: arm64: Disable MPAM visibility by default and ignore VMM writes
KVM: arm64: Add a macro for creating filtered sys_reg_descs entries
KVM: arm64: Fix missing traps of guest accesses to the MPAM registers
arm64: cpufeature: discover CPU support for MPAM
arm64: head.S: Initialise MPAM EL2 registers and disable traps
arm64/sysreg: Convert existing MPAM sysregs and add the remaining entries
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/psci-1.3:
: PSCI v1.3 support, courtesy of David Woodhouse
:
: Bump KVM's PSCI implementation up to v1.3, with the added bonus of
: implementing the SYSTEM_OFF2 call. Like other system-scoped PSCI calls,
: this gets relayed to userspace for further processing with a new
: KVM_SYSTEM_EVENT_SHUTDOWN flag.
:
: As an added bonus, implement client-side support for hibernation with
: the SYSTEM_OFF2 call.
arm64: Use SYSTEM_OFF2 PSCI call to power off for hibernate
KVM: arm64: nvhe: Pass through PSCI v1.3 SYSTEM_OFF2 call
KVM: selftests: Add test for PSCI SYSTEM_OFF2
KVM: arm64: Add support for PSCI v1.2 and v1.3
KVM: arm64: Add PSCI v1.3 SYSTEM_OFF2 function for hibernation
firmware/psci: Add definitions for PSCI v1.3 specification
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Only allow userspace to set VIPT(0b10) or PIPT(0b11) for L1Ip based on
what hardware reports as both AIVIVT (0b01) and VPIPT (0b00) are
documented as reserved.
Using a VIPT for Guest where hardware reports PIPT may lead to over
invalidation, but is still correct. Hence, we can allow downgrading
PIPT to VIPT, but not the other way around.
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20241022073943.35764-1-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Improper use of userspace_irqchip_in_use led to syzbot hitting the
following WARN_ON() in kvm_timer_update_irq():
WARNING: CPU: 0 PID: 3281 at arch/arm64/kvm/arch_timer.c:459
kvm_timer_update_irq+0x21c/0x394
Call trace:
kvm_timer_update_irq+0x21c/0x394 arch/arm64/kvm/arch_timer.c:459
kvm_timer_vcpu_reset+0x158/0x684 arch/arm64/kvm/arch_timer.c:968
kvm_reset_vcpu+0x3b4/0x560 arch/arm64/kvm/reset.c:264
kvm_vcpu_set_target arch/arm64/kvm/arm.c:1553 [inline]
kvm_arch_vcpu_ioctl_vcpu_init arch/arm64/kvm/arm.c:1573 [inline]
kvm_arch_vcpu_ioctl+0x112c/0x1b3c arch/arm64/kvm/arm.c:1695
kvm_vcpu_ioctl+0x4ec/0xf74 virt/kvm/kvm_main.c:4658
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__arm64_sys_ioctl+0x108/0x184 fs/ioctl.c:893
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x78/0x1b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0xe8/0x1b0 arch/arm64/kernel/syscall.c:132
do_el0_svc+0x40/0x50 arch/arm64/kernel/syscall.c:151
el0_svc+0x54/0x14c arch/arm64/kernel/entry-common.c:712
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598
The following sequence led to the scenario:
- Userspace creates a VM and a vCPU.
- The vCPU is initialized with KVM_ARM_VCPU_PMU_V3 during
KVM_ARM_VCPU_INIT.
- Without any other setup, such as vGIC or vPMU, userspace issues
KVM_RUN on the vCPU. Since the vPMU is requested, but not setup,
kvm_arm_pmu_v3_enable() fails in kvm_arch_vcpu_run_pid_change().
As a result, KVM_RUN returns after enabling the timer, but before
incrementing 'userspace_irqchip_in_use':
kvm_arch_vcpu_run_pid_change()
ret = kvm_arm_pmu_v3_enable()
if (!vcpu->arch.pmu.created)
return -EINVAL;
if (ret)
return ret;
[...]
if (!irqchip_in_kernel(kvm))
static_branch_inc(&userspace_irqchip_in_use);
- Userspace ignores the error and issues KVM_ARM_VCPU_INIT again.
Since the timer is already enabled, control moves through the
following flow, ultimately hitting the WARN_ON():
kvm_timer_vcpu_reset()
if (timer->enabled)
kvm_timer_update_irq()
if (!userspace_irqchip())
ret = kvm_vgic_inject_irq()
ret = vgic_lazy_init()
if (unlikely(!vgic_initialized(kvm)))
if (kvm->arch.vgic.vgic_model !=
KVM_DEV_TYPE_ARM_VGIC_V2)
return -EBUSY;
WARN_ON(ret);
Theoretically, since userspace_irqchip_in_use's functionality can be
simply replaced by '!irqchip_in_kernel()', get rid of the static key
to avoid the mismanagement, which also helps with the syzbot issue.
Cc: <stable@vger.kernel.org>
Reported-by: syzbot <syzkaller@googlegroups.com>
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Start reprogramming PMU events at nested boundaries now that everything
is in place to handle the EL2 event filter. Only repaint events where
the filter differs between EL1 and EL2 as a slight optimization.
PMU now 'works' for nested VMs, albeit slow.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182559.3364829-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
It hopefully comes as no surprise when I say that vEL2 actually runs at
EL1. So, the guest hypervisor's EL2 event filter (NSH) needs to actually
be applied to EL1 in the perf event. In addition to this, the disable
bit for the guest counter range (HPMD) needs to have the effect of
stopping the affected counters.
Do exactly that by stuffing ::exclude_kernel with the combined effect of
these controls. This isn't quite enough yet, as the backing perf events
need to be reprogrammed upon nested ERET/exception entry to remap the
effective filter onto ::exclude_kernel.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-18-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Counters that fall in the hypervisor range (i.e. N >= HPMN) have a
separate control for enabling 64 bit overflow. Take it into account.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-17-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
When the PMU is configured with split counter ranges, HPME becomes the
enable bit for the counters reserved for EL2.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-16-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Checking the exception level filters for a PMC is a minor annoyance to
open code. Add helpers to check if an event counts at EL0 and EL1, which
will prove useful in a subsequent change.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-15-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The value of MDCR_EL2.HPMN controls the number of event counters made
visible to EL0 and EL1. This means it is possible for the guest
hypervisor to allow direct access to event counters to the L2.
Rework KVM's PMU register emulation to take the effects of HPMN into
account when handling a trap. For bitmask-style registers, writes only
affect accessible registers.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-14-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Nested PMU support requires dynamically changing the visible range of
PMU counters based on the exception level and value of MDCR_EL2.HPMN. At
the same time, the PMU emulation code needs to know the absolute number
of implemented counters, regardless of context.
Rename the existing helper to make it obvious that it returns the number
of implemented counters and not anything else.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-13-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Everything is in place now for KVM to actually handle MDCR_EL2.HPMN. Not
only that, the emulation is capable of doing FEAT_HPMN0. Advertise
support for the feature in the VM's ID registers. It is possible to
emulate FEAT_HPMN0 on hardware that doesn't support it since KVM
currently traps all PMU registers. Having said that, let's only
advertise the feature on supporting hardware in case KVM ever provides
'direct' PMU support to VMs w/o involving host perf.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-12-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
MDCR_EL2.HPMN splits the PMU event counters into two ranges: the first
range is accessible from all ELs, and the second range is accessible
only to EL2/3. Supposing the guest hypervisor allows direct access to
the PMU counters from the L2, KVM needs to locally handle those
accesses.
Add a new complex trap configuration for HPMN that checks if the counter
index is accessible to the current context. As written, the architecture
suggests HPMN only causes PMEVCNTR<n>_EL0 to trap, though intuition (and
the pseudocode) suggest that the trap applies to PMEVTYPER<n>_EL0 as
well.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-11-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
TPM and TPMCR trap bits also affect Host EL0. How fun.
Mark these two trap bits as such and take advantage of the new
infrastructure for dealing w/ EL0 traps.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-10-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Wire up the other end of traps that affect host EL0 by actually
injecting them into the guest hypervisor. Skip over FGT entirely, as a
cursory glance suggests no FGT is effective in host EL0.
Note that kvm_inject_nested() is already equipped for handling
exceptions while the VM is already in a host context.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-9-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
BEHAVE_FORWARD_ANY is slightly ambiguous, especially since we're about
to cram some more information into the enum. Rephrase it.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-8-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
KVM uses a sanity-check to avoid infinite recursion in trap combinations
that could potentially depend on itself. Narrow the scope of this sanity
check to the exact CGT IDs that correspond w/ trap combos, opening the
door to using 'complex' traps as part of a combination.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-7-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Add support for sanitising MDCR_EL2 and describe the RES0/RES1 bits
according to the feature set exposed to the VM.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-6-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Align the field definitions w/ DDI0601 2024-09 and opportunistically
declare MTPMU as a signed field.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-5-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Migrate MDCR_EL2 over to the sysreg table and align definitions with
DDI0601 2024-09.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-4-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Describe the new ID register in line with DDI0601 2024-09.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Handle the initialization of trap registers at the hypervisor in
pKVM, even for non-protected guests. The host is not trusted with
the values of the trap registers, regardless of the VM type.
Therefore, when switching between the host and the guests, only
flush the HCR_EL2 TWI and TWE bits. The host is allowed to
configure these for opportunistic scheduling, as neither affects
the protection of VMs or the hypervisor.
Reported-by: Will Deacon <will@kernel.org>
Fixes: 814ad8f96e92 ("KVM: arm64: Drop trapping of PAuth instructions/keys")
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241018074833.2563674-5-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Do not trust the state of the VM as provided by the host when
initializing the hypervisor's view of the VM sate. Initialize it
instead at EL2 to a known good and safe state, as pKVM already
does with hypervisor VCPU states.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241018074833.2563674-4-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Move kvm_vcpu_enable_ptrauth() to a shared header to be used by
hypervisor code in protected mode.
No functional change intended.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241018074833.2563674-3-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Move pkvm_vcpu_init_traps() to the initialization of the
hypervisor's vcpu state in init_pkvm_hyp_vcpu(), and remove the
associated hypercall.
In protected mode, traps need to be initialized whenever a VCPU
is initialized anyway, and not only for protected VMs. This also
saves an unnecessary hypercall.
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241018074833.2563674-2-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
commit 011e5f5bf529f ("arm64/cpufeature: Add remaining feature bits in
ID_AA64PFR0 register") exposed the MPAM field of AA64PFR0_EL1 to guests,
but didn't add trap handling. A previous patch supplied the missing trap
handling.
Existing VMs that have the MPAM field of ID_AA64PFR0_EL1 set need to
be migratable, but there is little point enabling the MPAM CPU
interface on new VMs until there is something a guest can do with it.
Clear the MPAM field from the guest's ID_AA64PFR0_EL1 and on hardware
that supports MPAM, politely ignore the VMMs attempts to set this bit.
Guests exposed to this bug have the sanitised value of the MPAM field,
so only the correct value needs to be ignored. This means the field
can continue to be used to block migration to incompatible hardware
(between MPAM=1 and MPAM=5), and the VMM can't rely on the field
being ignored.
Signed-off-by: James Morse <james.morse@arm.com>
Co-developed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241030160317.2528209-7-joey.gouly@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The sys_reg_descs array holds function pointers and reset value for
managing the user-space and guest view of system registers. These
are mostly created by a set of macro's as only some combinations
of behaviour are needed.
If a register needs special treatment, its sys_reg_descs entry is
open-coded. This is true of some id registers where the value provided
by user-space is validated by some helpers.
Before adding another one of these, add a helper that covers the
existing special cases. 'ID_FILTERED' expects helpers to set the
user-space value, and retrieve the modified reset value.
Like ID_WRITABLE() this uses id_visibility(), which should have no
functional change for the registers converted to use ID_FILTERED().
read_sanitised_id_aa64dfr0_el1() and read_sanitised_id_aa64pfr0_el1()
have been refactored to be called from kvm_read_sanitised_id_reg(), to
try be consistent with ID_WRITABLE().
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241030160317.2528209-6-joey.gouly@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
commit 011e5f5bf529f ("arm64/cpufeature: Add remaining feature bits in
ID_AA64PFR0 register") exposed the MPAM field of AA64PFR0_EL1 to guests,
but didn't add trap handling.
If you are unlucky, this results in an MPAM aware guest being delivered
an undef during boot. The host prints:
| kvm [97]: Unsupported guest sys_reg access at: ffff800080024c64 [00000005]
| { Op0( 3), Op1( 0), CRn(10), CRm( 5), Op2( 0), func_read },
Which results in:
| Internal error: Oops - Undefined instruction: 0000000002000000 [#1] PREEMPT SMP
| Modules linked in:
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.0-rc7-00559-gd89c186d50b2 #14616
| Hardware name: linux,dummy-virt (DT)
| pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : test_has_mpam+0x18/0x30
| lr : test_has_mpam+0x10/0x30
| sp : ffff80008000bd90
...
| Call trace:
| test_has_mpam+0x18/0x30
| update_cpu_capabilities+0x7c/0x11c
| setup_cpu_features+0x14/0xd8
| smp_cpus_done+0x24/0xb8
| smp_init+0x7c/0x8c
| kernel_init_freeable+0xf8/0x280
| kernel_init+0x24/0x1e0
| ret_from_fork+0x10/0x20
| Code: 910003fd 97ffffde 72001c00 54000080 (d538a500)
| ---[ end trace 0000000000000000 ]---
| Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
| ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
Add the support to enable the traps, and handle the three guest accessible
registers by injecting an UNDEF. This stops KVM from spamming the host
log, but doesn't yet hide the feature from the id registers.
With MPAM v1.0 we can trap the MPAMIDR_EL1 register only if
ARM64_HAS_MPAM_HCR, with v1.1 an additional MPAM2_EL2.TIDR bit traps
MPAMIDR_EL1 on platforms that don't have MPAMHCR_EL2. Enable one of
these if either is supported. If neither is supported, the guest can
discover that the CPU has MPAM support, and how many PARTID etc the
host has ... but it can't influence anything, so its harmless.
Fixes: 011e5f5bf529f ("arm64/cpufeature: Add remaining feature bits in ID_AA64PFR0 register")
CC: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/linux-arm-kernel/20200925160102.118858-1-james.morse@arm.com/
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241030160317.2528209-5-joey.gouly@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
ARMv8.4 adds support for 'Memory Partitioning And Monitoring' (MPAM)
which describes an interface to cache and bandwidth controls wherever
they appear in the system.
Add support to detect MPAM. Like SVE, MPAM has an extra id register that
describes some more properties, including the virtualisation support,
which is optional. Detect this separately so we can detect
mismatched/insane systems, but still use MPAM on the host even if the
virtualisation support is missing.
MPAM needs enabling at the highest implemented exception level, otherwise
the register accesses trap. The 'enabled' flag is accessible to lower
exception levels, but its in a register that traps when MPAM isn't enabled.
The cpufeature 'matches' hook is extended to test this on one of the
CPUs, so that firmware can emulate MPAM as disabled if it is reserved
for use by secure world.
Secondary CPUs that appear late could trip cpufeature's 'lower safe'
behaviour after the MPAM properties have been advertised to user-space.
Add a verify call to ensure late secondaries match the existing CPUs.
(If you have a boot failure that bisects here its likely your CPUs
advertise MPAM in the id registers, but firmware failed to either enable
or MPAM, or emulate the trap as if it were disabled)
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241030160317.2528209-4-joey.gouly@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Add code to head.S's el2_setup to detect MPAM and disable any EL2 traps.
This register resets to an unknown value, setting it to the default
parititons/pmg before we enable the MMU is the best thing to do.
Kexec/kdump will depend on this if the previous kernel left the CPU
configured with a restrictive configuration.
If linux is booted at the highest implemented exception level el2_setup
will clear the enable bit, disabling MPAM.
This code can't be enabled until a subsequent patch adds the Kconfig
and cpufeature boiler plate.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241030160317.2528209-3-joey.gouly@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Move the existing MPAM system register defines from sysreg.h to
tools/sysreg and add the remaining system registers.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241030160317.2528209-2-joey.gouly@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
