summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2020-11-16ARM: dts: am335x: Fix comments for AM335X_PIN_GPMC_WPN pin in GPIO modeAlexander Shiyan
According to AM335x datasheet pin AM335X_PIN_GPMC_WPN in MODE7 works as GPIO0[31]. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: am335x-boneblue: Enable eQEPDavid Lechner
This enables the Enhanced Quadrature Encoder Pulse (eQEP) module for connectors E1, E2 and E3 on BeagleBone Blue. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: am33xx: Add nodes for eQEPDavid Lechner
This adds new nodes for the Texas Instruments Enhanced Quadrature Encoder Pulse (eQEP) module in the PWM subsystem on AM33XX. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-16ARM: dts: dra7: add second SHA instanceTero Kristo
DRA7 SoC has two SHA instances, add the missing second one under the main dts file. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-10Merge branch 'omap-for-v5.11/dt-mot-take2' into omap-for-v5.11/dtTony Lindgren
2020-11-10ARM: dts: xt875: add section for kionix kxtf9Carl Philipp Klemm
Add section for kionix kxtf9. Signed-off-by: Carl Philipp Klemm <philipp@uvos.xyz> [tony@atomide.com: removed extra header from description] Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-10ARM: dts: mapphone: separate out xt894 specific thingsCarl Philipp Klemm
Remove xt894 specific things from motorola-mapphone-common.dtsi and add them to omap4-droid4-xt894.dts and omap4-droid-bionic-xt875.dts as applicable. Signed-off-by: Carl Philipp Klemm <philipp@uvos.xyz> [tony@atomide.com: shortened subject, wrapped description] Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-10ARM: dts: omap: Fix schema warnings for pwm-ledsAlexander Dahl
The node names for devices using the pwm-leds driver follow a certain naming scheme (now). Parent node name is not enforced, but recommended by DT project. DTC arch/arm/boot/dts/omap3-beagle-xm.dt.yaml CHECK arch/arm/boot/dts/omap3-beagle-xm.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-beagle-xm.dt.yaml: pwmleds: 'pmu_stat' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-beagle-xm-ab.dt.yaml CHECK arch/arm/boot/dts/omap3-beagle-xm-ab.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-beagle-xm-ab.dt.yaml: pwmleds: 'pmu_stat' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-alto35.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-alto35.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-alto35.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-chestnut43.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-chestnut43.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-chestnut43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-gallop43.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-gallop43.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-gallop43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-palo35.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-palo35.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-palo35.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-palo43.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-palo43.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-palo43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-storm-alto35.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-storm-alto35.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-alto35.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-storm-chestnut43.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-storm-chestnut43.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-storm-gallop43.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-storm-gallop43.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-gallop43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-storm-palo35.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-storm-palo35.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-palo35.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-storm-palo43.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-storm-palo43.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-palo43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-storm-summit.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-storm-summit.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-summit.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-storm-tobi.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-storm-tobi.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-tobi.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-storm-tobiduo.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-storm-tobiduo.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-summit.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-summit.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-summit.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-tobi.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-tobi.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-tobi.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-tobiduo.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-tobiduo.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-tobiduo.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap4-kc1.dt.yaml CHECK arch/arm/boot/dts/omap4-kc1.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap4-kc1.dt.yaml: pwmleds: 'green', 'orange' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap4-sdp.dt.yaml CHECK arch/arm/boot/dts/omap4-sdp.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap4-sdp.dt.yaml: pwmleds: 'charging', 'kpad' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap4-sdp-es23plus.dt.yaml CHECK arch/arm/boot/dts/omap4-sdp-es23plus.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap4-sdp-es23plus.dt.yaml: pwmleds: 'charging', 'kpad' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml Signed-off-by: Alexander Dahl <post@lespocky.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-10ARM: dts: omap5: Harmonize DWC USB3 DT nodes nameSerge Semin
In accordance with the DWC USB3 bindings the corresponding node name is suppose to comply with the Generic USB HCD DT schema, which requires the USB nodes to have the name acceptable by the regexp: "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly named. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-10ARM: dts: am437x: Correct DWC USB3 compatible stringSerge Semin
Syonpsys IP cores are supposed to be defined with "snps" vendor-prefix. Use it instead of the deprecated "synopsys" one. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-10ARM: dts: pandaboard es: add bluetooth uart for HCIH. Nikolaus Schaller
The wl271 bluetooth uart is connected to uart2. Setup a serdev uart child and separate bluetooth and uart2 pinmux from wl12xx pinmux to better group the pins and muxes. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-11-10ARM: dts: pandaboard: fix pinmux for gpio user button of Pandaboard ESH. Nikolaus Schaller
The pinmux control register offset passed to OMAP4_IOPAD is odd. Fixes: ab9a13665e7c ("ARM: dts: pandaboard: add gpio user button") Cc: stable@vger.kernel.org Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-10-25treewide: Convert macro and uses of __section(foo) to __section("foo")Joe Perches
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-25Merge branch 'parisc-5.10-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull more parisc updates from Helge Deller: - During this merge window O_NONBLOCK was changed to become 000200000, but we missed that the syscalls timerfd_create(), signalfd4(), eventfd2(), pipe2(), inotify_init1() and userfaultfd() do a strict bit-wise check of the flags parameter. To provide backward compatibility with existing userspace we introduce parisc specific wrappers for those syscalls which filter out the old O_NONBLOCK value and replaces it with the new one. - Prevent HIL bus driver to get stuck when keyboard or mouse isn't attached - Improve error return codes when setting rtc time - Minor documentation fix in pata_ns87415.c * 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: ata: pata_ns87415.c: Document support on parisc with superio chip parisc: Add wrapper syscalls to fix O_NONBLOCK flag usage hil/parisc: Disable HIL driver when it gets stuck parisc: Improve error return codes when setting rtc time
2020-10-25Merge tag 'for-linus-5.10b-rc1c-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: - a series for the Xen pv block drivers adding module parameters for better control of resource usge - a cleanup series for the Xen event driver * tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: Documentation: add xen.fifo_events kernel parameter description xen/events: unmask a fifo event channel only if it was masked xen/events: only register debug interrupt for 2-level events xen/events: make struct irq_info private to events_base.c xen: remove no longer used functions xen-blkfront: Apply changed parameter name to the document xen-blkfront: add a parameter for disabling of persistent grants xen-blkback: add a parameter for disabling of persistent grants
2020-10-24Merge tag 'dma-mapping-5.10-1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping fixes from Christoph Hellwig: - document the new dma_{alloc,free}_pages() API - two fixups for the dma-mapping.h split * tag 'dma-mapping-5.10-1' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: document dma_{alloc,free}_pages dma-mapping: move more functions to dma-map-ops.h ARM/sa1111: add a missing include of dma-map-ops.h
2020-10-24Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "Two fixes for this merge window, and an unrelated bugfix for a host hang" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: ioapic: break infinite recursion on lazy EOI KVM: vmx: rename pi_init to avoid conflict with paride KVM: x86/mmu: Avoid modulo operator on 64-bit value to fix i386 build
2020-10-24Merge tag 'x86_seves_fixes_for_v5.10_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 SEV-ES fixes from Borislav Petkov: "Three fixes to SEV-ES to correct setting up the new early pagetable on 5-level paging machines, to always map boot_params and the kernel cmdline, and disable stack protector for ../compressed/head{32,64}.c. (Arvind Sankar)" * tag 'x86_seves_fixes_for_v5.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot/64: Explicitly map boot_params and command line x86/head/64: Disable stack protection for head$(BITS).o x86/boot/64: Initialize 5-level paging variables earlier
2020-10-24Merge tag 'powerpc-5.10-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - A fix for undetected data corruption on Power9 Nimbus <= DD2.1 in the emulation of VSX loads. The affected CPUs were not widely available. - Two fixes for machine check handling in guests under PowerVM. - A fix for our recent changes to SMP setup, when CONFIG_CPUMASK_OFFSTACK=y. - Three fixes for races in the handling of some of our powernv sysfs attributes. - One change to remove TM from the set of Power10 CPU features. - A couple of other minor fixes. Thanks to: Aneesh Kumar K.V, Christophe Leroy, Ganesh Goudar, Jordan Niethe, Mahesh Salgaonkar, Michael Neuling, Oliver O'Halloran, Qian Cai, Srikar Dronamraju, Vasant Hegde. * tag 'powerpc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries: Avoid using addr_to_pfn in real mode powerpc/uaccess: Don't use "m<>" constraint with GCC 4.9 powerpc/eeh: Fix eeh_dev_check_failure() for PE#0 powerpc/64s: Remove TM from Power10 features selftests/powerpc: Make alignment handler test P9N DD2.1 vector CI load workaround powerpc: Fix undetected data corruption with P9N DD2.1 VSX CI load emulation powerpc/powernv/dump: Handle multiple writes to ack attribute powerpc/powernv/dump: Fix race while processing OPAL dump powerpc/smp: Use GFP_ATOMIC while allocating tmp mask powerpc/smp: Remove unnecessary variable powerpc/mce: Avoid nmi_enter/exit in real mode on pseries hash powerpc/opal_elog: Handle multiple writes to ack attribute
2020-10-24Merge tag 'riscv-for-linus-5.10-mw1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: "Just a single patch set: the remainder of Christoph's work to remove set_fs, including the RISC-V portion" * tag 'riscv-for-linus-5.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: remove address space overrides using set_fs() riscv: implement __get_kernel_nofault and __put_user_nofault riscv: refactor __get_user and __put_user riscv: use memcpy based uaccess for nommu again asm-generic: make the set_fs implementation optional asm-generic: add nommu implementations of __{get,put}_kernel_nofault asm-generic: improve the nommu {get,put}_user handling uaccess: provide a generic TASK_SIZE_MAX definition
2020-10-24Merge tag 'armsoc-defconfig' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC defconfig updates from Olof Johansson: "We keep this in a separate branch to avoid cross-branch conflicts, but most of the material here is fairly boring -- some new drivers turned on for hardware since they were merged, and some refreshed files due to time having moved a lot of entries around" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (33 commits) ARM: multi_v7_defconfig: add FMC2 EBI controller support arm64: defconfig: enable Qualcomm ASoC modules arm64: defconfig: qcom: enable GPU clock controller for SM8[12]50 arm64: defconfig: enable INTERCONNECT for Qualcomm chipsets arm64: defconfig: enable the sl28cpld board management controller arm64: defconfig: Enable the eLCDIF and Raydium RM67191 drivers arm64: defconfig: Enable Qcom SNPS Femto PHY ARM: configs: Update Realview defconfig ARM: configs: Update Versatile defconfig ARM: config: aspeed_g5: Enable IBM OP Panel driver ARM: config: aspeed-g5: Enable I2C GPIO mux driver ARM: config: aspeed: Fix selection of media drivers arm64: defconfig: Enable Samsung S3FWRN5 NFC driver ARM: omap2plus_defconfig: enable generic net options ARM: omap2plus_defconfig: enable twl4030_madc as a loadable module arm64: defconfig: Enable clock driver for ROHM BD718x7 PMIC arm64: defconfig: Build ADMA and ACONNECT driver arm64: defconfig: Build AHUB component drivers arm64: defconfig: Enable Lontium LT9611 driver arm64: defcondfig: Enable USB ACM and FTDI drivers ...
2020-10-24Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM Devicetree updates from Olof Johansson: "As usual, most of the changes are to devicetrees. Besides smaller fixes, some refactorings and cleanups, some of the new platforms and chips (or significant features) supported are below: Broadcom boards: - Cisco Meraki MR32 (BCM53016-based) - BCM2711 (RPi4) display pipeline support Actions Semi boards: - Caninos Loucos Labrador SBC (S500-based) - RoseapplePi SBC (S500-based) Allwinner SoCs/boards: - A100 SoC with Perf1 board - Mali, DMA, Cetrus and IR support for R40 SoC Amlogic boards: - Libretch S905x CC V2 board - Hardkernel ODROID-N2+ board Aspeed boards/platforms: - Wistron Mowgli (AST2500-based, Power9 OpenPower server) - Facebook Wedge400 (AST2500-based, ToR switch) Hisilicon SoC: - SD5203 SoC Nvidia boards: - Tegra234 VDK, for pre-silicon Orin SoC NXP i.MX boards: - Librem 5 phone - i.MX8MM DDR4 EVK - Variscite VAR-SOM-MX8MN SoM - Symphony board - Tolino Shine 2 HD - TQMa6 SoM - Y Soft IOTA Orion Rockchip boards: - NanoPi R2S board - A95X-Z2 board - more Rock-Pi4 variants STM32 boards: - Odyssey SOM board (STM32MP157CAC-based) - DH DRC02 board Toshiba SoCs/boards: - Visconti SoC and TPMV7708 board" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (638 commits) ARM: dts: nspire: Fix SP804 users arm64: dts: lg: Fix SP804 users arm64: dts: lg: Fix SP805 clocks ARM: mstar: Fix up the fallout from moving the dts/dtsi files ARM: mstar: Add mstar prefix to all of the dtsi/dts files ARM: mstar: Add interrupt to pm_uart ARM: mstar: Add interrupt controller to base dtsi ARM: dts: meson8: remove two invalid interrupt lines from the GPU node arm64: dts: ti: k3-j7200-common-proc-board: Add USB support arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function arm64: dts: ti: k3-j7200-main: Add USB controller arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux dt-bindings: ti-serdes-mux: Add defines for J7200 SoC ARM: dts: hisilicon: add SD5203 dts ARM: dts: hisilicon: fix the system controller compatible nodes arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1 arm64: dts: zynqmp: Remove undocumented u-boot properties arm64: dts: zynqmp: Remove additional compatible string for i2c IPs arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml ...
2020-10-24Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms. A bulk of this is smaller fixes or cleanups, but some of the new material this time around is: - Support for Nvidia Tegra234 SoC - Ring accelerator support for TI AM65x - PRUSS driver for TI platforms - Renesas support for R-Car V3U SoC - Reset support for Cortex-M4 processor on i.MX8MQ There are also new socinfo entries for a handful of different SoCs and platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits) drm/mediatek: reduce clear event soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api soc: mediatek: cmdq: add jump function soc: mediatek: cmdq: add write_s_mask value function soc: mediatek: cmdq: add write_s value function soc: mediatek: cmdq: add read_s function soc: mediatek: cmdq: add write_s_mask function soc: mediatek: cmdq: add write_s function soc: mediatek: cmdq: add address shift in jump soc: mediatek: mtk-infracfg: Fix kerneldoc soc: amlogic: pm-domains: use always-on flag reset: sti: reset-syscfg: fix struct description warnings reset: imx7: add the cm4 reset for i.MX8MQ dt-bindings: reset: imx8mq: add m4 reset reset: Fix and extend kerneldoc reset: reset-zynqmp: Added support for Versal platform dt-bindings: reset: Updated binding for Versal reset driver reset: imx7: Support module build soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk soc: fsl: qman: convert to use be32_add_cpu() ...
2020-10-24Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC platform updates from Olof Johansson: "SoC changes, a substantial part of this is cleanup of some of the older platforms that used to have a bunch of board files. In particular: - Remove non-DT i.MX platforms that haven't seen activity in years, it's time to remove them. - A bunch of cleanup and removal of platform data for TI/OMAP platforms, moving over to genpd for power/reset control (yay!) - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them closer to multiplatform support (not quite there yet, but getting close). There are a few other changes too, smaller fixlets, etc. For new platform support, the primary ones are: - New SoC: Hisilicon SD5203, ARM926EJ-S platform. - Cpufreq support for i.MX7ULP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits) ARM: mstar: Select MStar intc ARM: stm32: Replace HTTP links with HTTPS ones ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC ARM: omap3: enable off mode automatically clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: imx: Remove remnant board file support pieces ...
2020-10-24Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "I had queued up a batch of fixes that got a bit close to the release for sending in before the merge window opened, so I'm including them in the merge window batch instead. Mostly smaller DT tweaks and fixes, the usual mix that we tend to have through the releases" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: dts: iwg20d-q7-common: Fix touch controller probe failure ARM: OMAP2+: Restore MPU power domain if cpu_cluster_pm_enter() fails ARM: dts: am33xx: modify AM33XX_IOPAD for #pinctrl-cells = 2 soc: actions: include header to fix missing prototype arm64: dts: ti: k3-j721e: Rename mux header and update macro names soc: qcom: pdr: Fixup array type of get_domain_list_resp message arm64: dts: qcom: pm660: Fix missing pound sign in interrupt-cells arm64: dts: qcom: kitakami: Temporarily disable SDHCI1 arm64: dts: sdm630: Temporarily disable SMMUs by default arm64: dts: sdm845: Fixup OPP table for all qup devices arm64: dts: allwinner: h5: remove Mali GPU PMU module ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix dcdc1 regulator soc: xilinx: Fix error code in zynqmp_pm_probe()
2020-10-24KVM: ioapic: break infinite recursion on lazy EOIVitaly Kuznetsov
During shutdown the IOAPIC trigger mode is reset to edge triggered while the vfio-pci INTx is still registered with a resampler. This allows us to get into an infinite loop: ioapic_set_irq -> ioapic_lazy_update_eoi -> kvm_ioapic_update_eoi_one -> kvm_notify_acked_irq -> kvm_notify_acked_gsi -> (via irq_acked fn ptr) irqfd_resampler_ack -> kvm_set_irq -> (via set fn ptr) kvm_set_ioapic_irq -> kvm_ioapic_set_irq -> ioapic_set_irq Commit 8be8f932e3db ("kvm: ioapic: Restrict lazy EOI update to edge-triggered interrupts", 2020-05-04) acknowledges that this recursion loop exists and tries to avoid it at the call to ioapic_lazy_update_eoi, but at this point the scenario is already set, we have an edge interrupt with resampler on the same gsi. Fortunately, the only user of irq ack notifiers (in addition to resamplefd) is i8254 timer interrupt reinjection. These are edge-triggered, so in principle they would need the call to kvm_ioapic_update_eoi_one from ioapic_lazy_update_eoi, but they already disable AVIC(*), so they don't need the lazy EOI behavior. Therefore, remove the call to kvm_ioapic_update_eoi_one from ioapic_lazy_update_eoi. This fixes CVE-2020-27152. Note that this issue cannot happen with SR-IOV assigned devices because virtual functions do not have INTx, only MSI. Fixes: f458d039db7e ("kvm: ioapic: Lazy update IOAPIC EOI") Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-24KVM: vmx: rename pi_init to avoid conflict with paridePaolo Bonzini
allyesconfig results in: ld: drivers/block/paride/paride.o: in function `pi_init': (.text+0x1340): multiple definition of `pi_init'; arch/x86/kvm/vmx/posted_intr.o:posted_intr.c:(.init.text+0x0): first defined here make: *** [Makefile:1164: vmlinux] Error 1 because commit: commit 8888cdd0996c2d51cd417f9a60a282c034f3fa28 Author: Xiaoyao Li <xiaoyao.li@intel.com> Date: Wed Sep 23 11:31:11 2020 -0700 KVM: VMX: Extract posted interrupt support to separate files added another pi_init(), though one already existed in the paride code. Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-24KVM: x86/mmu: Avoid modulo operator on 64-bit value to fix i386 buildSean Christopherson
Replace a modulo operator with the more common pattern for computing the gfn "offset" of a huge page to fix an i386 build error. arch/x86/kvm/mmu/tdp_mmu.c:212: undefined reference to `__umoddi3' In fact, almost all of tdp_mmu.c can be elided on 32-bit builds, but that is a much larger patch. Fixes: 2f2fad0897cb ("kvm: x86/mmu: Add functions to handle changed TDP SPTEs") Reported-by: Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20201024031150.9318-1-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23Merge tag 'pm-5.10-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "First of all, the adaptive voltage scaling (AVS) drivers go to new platform-specific locations as planned (this part was reported to have merge conflicts against the new arm-soc updates in linux-next). In addition to that, there are some fixes (intel_idle, intel_pstate, RAPL, acpi_cpufreq), the addition of on/off notifiers and idle state accounting support to the generic power domains (genpd) code and some janitorial changes all over. Specifics: - Move the AVS drivers to new platform-specific locations and get rid of the drivers/power/avs directory (Ulf Hansson). - Add on/off notifiers and idle state accounting support to the generic power domains (genpd) framework (Ulf Hansson, Lina Iyer). - Ulf will maintain the PM domain part of cpuidle-psci (Ulf Hansson). - Make intel_idle disregard ACPI _CST if it cannot use the data returned by that method (Mel Gorman). - Modify intel_pstate to avoid leaving useless sysfs directory structure behind if it cannot be registered (Chen Yu). - Fix domain detection in the RAPL power capping driver and prevent it from failing to enumerate the Psys RAPL domain (Zhang Rui). - Allow acpi-cpufreq to use ACPI _PSD information with Family 19 and later AMD chips (Wei Huang). - Update the driver assumptions comment in intel_idle and fix a kerneldoc comment in the runtime PM framework (Alexander Monakov, Bean Huo). - Avoid unnecessary resets of the cached frequency in the schedutil cpufreq governor to reduce overhead (Wei Wang). - Clean up the cpufreq core a bit (Viresh Kumar). - Make assorted minor janitorial changes (Daniel Lezcano, Geert Uytterhoeven, Hubert Jasudowicz, Tom Rix). - Clean up and optimize the cpupower utility somewhat (Colin Ian King, Martin Kaistra)" * tag 'pm-5.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits) PM: sleep: remove unreachable break PM: AVS: Drop the avs directory and the corresponding Kconfig PM: AVS: qcom-cpr: Move the driver to the qcom specific drivers PM: runtime: Fix typo in pm_runtime_set_active() helper comment PM: domains: Fix build error for genpd notifiers powercap: Fix typo in Kconfig "Plance" -> "Plane" cpufreq: schedutil: restore cached freq when next_f is not changed acpi-cpufreq: Honor _PSD table setting on new AMD CPUs PM: AVS: smartreflex Move driver to soc specific drivers PM: AVS: rockchip-io: Move the driver to the rockchip specific drivers PM: domains: enable domain idle state accounting PM: domains: Add curly braces to delimit comment + statement block PM: domains: Add support for PM domain on/off notifiers for genpd powercap/intel_rapl: enumerate Psys RAPL domain together with package RAPL domain powercap/intel_rapl: Fix domain detection intel_idle: Ignore _CST if control cannot be taken from the platform cpuidle: Remove pointless stub intel_idle: mention assumption that WBINVD is not needed MAINTAINERS: Add section for cpuidle-psci PM domain cpufreq: intel_pstate: Delete intel_pstate sysfs if failed to register the driver ...
2020-10-23x86/uaccess: fix code generation in put_user()Rasmus Villemoes
Quoting https://gcc.gnu.org/onlinedocs/gcc/Local-Register-Variables.html: You can define a local register variable and associate it with a specified register... The only supported use for this feature is to specify registers for input and output operands when calling Extended asm (see Extended Asm). This may be necessary if the constraints for a particular machine don't provide sufficient control to select the desired register. On 32-bit x86, this is used to ensure that gcc will put an 8-byte value into the %edx:%eax pair, while all other cases will just use the single register %eax (%rax on x86-64). While the _ASM_AX actually just expands to "%eax", note this comment next to get_user() which does something very similar: * The use of _ASM_DX as the register specifier is a bit of a * simplification, as gcc only cares about it as the starting point * and not size: for a 64-bit value it will use %ecx:%edx on 32 bits * (%ecx being the next register in gcc's x86 register sequence), and * %rdx on 64 bits. However, getting this to work requires that there is no code between the assignment to the local register variable and its use as an input to the asm() which can possibly clobber any of the registers involved - including evaluation of the expressions making up other inputs. In the current code, the ptr expression used directly as an input may cause such code to be emitted. For example, Sean Christopherson observed that with KASAN enabled and ptr being current->set_child_tid (from chedule_tail()), the load of current->set_child_tid causes a call to __asan_load8() to be emitted immediately prior to the __put_user_4 call, and Naresh Kamboju reports that various mmstress tests fail on KASAN-enabled builds. It's also possible to synthesize a broken case without KASAN if one uses "foo()" as the ptr argument, with foo being some "extern u64 __user *foo(void);" (though I don't know if that appears in real code). Fix it by making sure ptr gets evaluated before the assignment to __val_pu, and add a comment that __val_pu must be the last thing computed before the asm() is entered. Cc: Sean Christopherson <sean.j.christopherson@intel.com> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Fixes: d55564cfc222 ("x86: Make __put_user() generate an out-of-line call") Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-23Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "For x86, there is a new alternative and (in the future) more scalable implementation of extended page tables that does not need a reverse map from guest physical addresses to host physical addresses. For now it is disabled by default because it is still lacking a few of the existing MMU's bells and whistles. However it is a very solid piece of work and it is already available for people to hammer on it. Other updates: ARM: - New page table code for both hypervisor and guest stage-2 - Introduction of a new EL2-private host context - Allow EL2 to have its own private per-CPU variables - Support of PMU event filtering - Complete rework of the Spectre mitigation PPC: - Fix for running nested guests with in-kernel IRQ chip - Fix race condition causing occasional host hard lockup - Minor cleanups and bugfixes x86: - allow trapping unknown MSRs to userspace - allow userspace to force #GP on specific MSRs - INVPCID support on AMD - nested AMD cleanup, on demand allocation of nested SVM state - hide PV MSRs and hypercalls for features not enabled in CPUID - new test for MSR_IA32_TSC writes from host and guest - cleanups: MMU, CPUID, shared MSRs - LAPIC latency optimizations ad bugfixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (232 commits) kvm: x86/mmu: NX largepage recovery for TDP MMU kvm: x86/mmu: Don't clear write flooding count for direct roots kvm: x86/mmu: Support MMIO in the TDP MMU kvm: x86/mmu: Support write protection for nesting in tdp MMU kvm: x86/mmu: Support disabling dirty logging for the tdp MMU kvm: x86/mmu: Support dirty logging for the TDP MMU kvm: x86/mmu: Support changed pte notifier in tdp MMU kvm: x86/mmu: Add access tracking for tdp_mmu kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU kvm: x86/mmu: Add TDP MMU PF handler kvm: x86/mmu: Remove disallowed_hugepage_adjust shadow_walk_iterator arg kvm: x86/mmu: Support zapping SPTEs in the TDP MMU KVM: Cache as_id in kvm_memory_slot kvm: x86/mmu: Add functions to handle changed TDP SPTEs kvm: x86/mmu: Allocate and free TDP MMU roots kvm: x86/mmu: Init / Uninit the TDP MMU kvm: x86/mmu: Introduce tdp_iter KVM: mmu: extract spte.h and spte.c KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp ...
2020-10-23parisc: Add wrapper syscalls to fix O_NONBLOCK flag usageHelge Deller
The commit 75ae04206a4d ("parisc: Define O_NONBLOCK to become 000200000") changed the O_NONBLOCK constant to have only one bit set (like all other architectures). This change broke some existing userspace code (e.g. udevadm, systemd-udevd, elogind) which called specific syscalls which do strict value checking on their flag parameter. This patch adds wrapper functions for the relevant syscalls. The wrappers masks out any old invalid O_NONBLOCK flags, reports in the syslog if the old O_NONBLOCK value was used and then calls the target syscall with the new O_NONBLOCK value. Fixes: 75ae04206a4d ("parisc: Define O_NONBLOCK to become 000200000") Signed-off-by: Helge Deller <deller@gmx.de> Tested-by: Meelis Roos <mroos@linux.ee> Tested-by: Jeroen Roovers <jer@xs4all.nl>
2020-10-23Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: "vhost, vdpa, and virtio cleanups and fixes A very quiet cycle, no new features" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: MAINTAINERS: add URL for virtio-mem vhost_vdpa: remove unnecessary spin_lock in vhost_vring_call vringh: fix __vringh_iov() when riov and wiov are different vdpa/mlx5: Setup driver only if VIRTIO_CONFIG_S_DRIVER_OK s390: virtio: PV needs VIRTIO I/O device protection virtio: let arch advertise guest's memory access restrictions vhost_vdpa: Fix duplicate included kernel.h vhost: reduce stack usage in log_used virtio-mem: Constify mem_id_table virtio_input: Constify id_table virtio-balloon: Constify id_table vdpa/mlx5: Fix failure to bring link up vdpa/mlx5: Make use of a specific 16 bit endianness API
2020-10-23Merge tag 'tag-chrome-platform-for-v5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "cros-ec: - Error code cleanup across cros-ec by Guenter - Remove cros_ec_cmd_xfer in favor of cros_ec_cmd_xfer_status cros_ec_typec: - Landed initial USB4 support in typec connector class driver for cros_ec - Role switch bugfix on disconnect, and reordering configuration steps cros_ec_lightbar: - Fix buffer outsize and result for get_lightbar_version misc: - Remove config MFD_CROS_EC, now that transition from MFD is complete - Enable KEY_LEFTMETA in new location on arm based cros-ec-keyboard keymap" * tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: ARM: dts: cros-ec-keyboard: Add alternate keymap for KEY_LEFTMETA platform/chrome: Use kobj_to_dev() instead of container_of() platform/chrome: cros_ec_proto: Drop cros_ec_cmd_xfer() platform/chrome: cros_ec_proto: Update cros_ec_cmd_xfer() call-sites platform/chrome: Kconfig: Remove the transitional MFD_CROS_EC config platform/chrome: cros_ec_lightbar: Reduce ligthbar get version command platform/chrome: cros_ec_trace: Add fields to command traces platform/chrome: cros_ec_typec: Re-order connector configuration steps platform/chrome: cros_ec_typec: Avoid setting usb role twice during disconnect platform/chrome: cros_ec_typec: Send enum values to usb_role_switch_set_role() platform/chrome: cros_ec_typec: USB4 support pwm: cros-ec: Simplify EC error handling platform/chrome: cros_ec_proto: Convert EC error codes to Linux error codes platform/input: cros_ec: Replace -ENOTSUPP with -ENOPROTOOPT pwm: cros-ec: Accept more error codes from cros_ec_cmd_xfer_status platform/chrome: cros_ec_sysfs: Report range of error codes from EC cros_ec_lightbar: Accept more error codes from cros_ec_cmd_xfer_status iio: cros_ec: Accept -EOPNOTSUPP as 'not supported' error code
2020-10-23Merge tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull arch task_work cleanups from Jens Axboe: "Two cleanups that don't fit other categories: - Finally get the task_work_add() cleanup done properly, so we don't have random 0/1/false/true/TWA_SIGNAL confusing use cases. Updates all callers, and also fixes up the documentation for task_work_add(). - While working on some TIF related changes for 5.11, this TIF_NOTIFY_RESUME cleanup fell out of that. Remove some arch duplication for how that is handled" * tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block: task_work: cleanup notification modes tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()
2020-10-23Merge tag 'arc-5.10-rc1-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fix from Vineet Gupta: "I found a snafu in perf driver which made it into 5.9-rc4 and the fix should go in now than wait" * tag 'arc-5.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: perf: redo the pct irq missing in device-tree handling
2020-10-23Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull more arm64 updates from Will Deacon: "A small selection of further arm64 fixes and updates. Most of these are fixes that came in during the merge window, with the exception of the HAVE_MOVE_PMD mremap() speed-up which we discussed back in 2018 and somehow forgot to enable upstream. - Improve performance of Spectre-v2 mitigation on Falkor CPUs (if you're lucky enough to have one) - Select HAVE_MOVE_PMD. This has been shown to improve mremap() performance, which is used heavily by the Android runtime GC, and it seems we forgot to enable this upstream back in 2018. - Ensure linker flags are consistent between LLVM and BFD - Fix stale comment in Spectre mitigation rework - Fix broken copyright header - Fix KASLR randomisation of the linear map - Prevent arm64-specific prctl()s from compat tasks (return -EINVAL)" Link: https://lore.kernel.org/kvmarm/20181108181201.88826-3-joelaf@google.com/ * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: proton-pack: Update comment to reflect new function name arm64: spectre-v2: Favour CPU-specific mitigation at EL2 arm64: link with -z norelro regardless of CONFIG_RELOCATABLE arm64: Fix a broken copyright header in gen_vdso_offsets.sh arm64: mremap speedup - Enable HAVE_MOVE_PMD arm64: mm: use single quantity to represent the PA to VA translation arm64: reject prctl(PR_PAC_RESET_KEYS) on compat tasks
2020-10-23Merge branch 'pm-avs'Rafael J. Wysocki
* pm-avs: PM: AVS: Drop the avs directory and the corresponding Kconfig PM: AVS: qcom-cpr: Move the driver to the qcom specific drivers PM: AVS: smartreflex Move driver to soc specific drivers PM: AVS: rockchip-io: Move the driver to the rockchip specific drivers
2020-10-23xen/events: only register debug interrupt for 2-level eventsJuergen Gross
xen_debug_interrupt() is specific to 2-level event handling. So don't register it with fifo event handling being active. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Link: https://lore.kernel.org/r/20201022094907.28560-4-jgross@suse.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-10-23kvm: x86/mmu: NX largepage recovery for TDP MMUBen Gardon
When KVM maps a largepage backed region at a lower level in order to make it executable (i.e. NX large page shattering), it reduces the TLB performance of that region. In order to avoid making this degradation permanent, KVM must periodically reclaim shattered NX largepages by zapping them and allowing them to be rebuilt in the page fault handler. With this patch, the TDP MMU does not respect KVM's rate limiting on reclaim. It traverses the entire TDP structure every time. This will be addressed in a future patch. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-21-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Don't clear write flooding count for direct rootsBen Gardon
Direct roots don't have a write flooding count because the guest can't affect that paging structure. Thus there's no need to clear the write flooding count on a fast CR3 switch for direct roots. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-20-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Support MMIO in the TDP MMUBen Gardon
In order to support MMIO, KVM must be able to walk the TDP paging structures to find mappings for a given GFN. Support this walk for the TDP MMU. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 v2: Thanks to Dan Carpenter and kernel test robot for finding that root was used uninitialized in get_mmio_spte. Signed-off-by: Ben Gardon <bgardon@google.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Message-Id: <20201014182700.2888246-19-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Support write protection for nesting in tdp MMUBen Gardon
To support nested virtualization, KVM will sometimes need to write protect pages which are part of a shadowed paging structure or are not writable in the shadowed paging structure. Add a function to write protect GFN mappings for this purpose. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-18-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Support disabling dirty logging for the tdp MMUBen Gardon
Dirty logging ultimately breaks down MMU mappings to 4k granularity. When dirty logging is no longer needed, these granaular mappings represent a useless performance penalty. When dirty logging is disabled, search the paging structure for mappings that could be re-constituted into a large page mapping. Zap those mappings so that they can be faulted in again at a higher mapping level. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-17-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Support dirty logging for the TDP MMUBen Gardon
Dirty logging is a key feature of the KVM MMU and must be supported by the TDP MMU. Add support for both the write protection and PML dirty logging modes. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-16-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Support changed pte notifier in tdp MMUBen Gardon
In order to interoperate correctly with the rest of KVM and other Linux subsystems, the TDP MMU must correctly handle various MMU notifiers. Add a hook and handle the change_pte MMU notifier. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-15-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Add access tracking for tdp_mmuBen Gardon
In order to interoperate correctly with the rest of KVM and other Linux subsystems, the TDP MMU must correctly handle various MMU notifiers. The main Linux MM uses the access tracking MMU notifiers for swap and other features. Add hooks to handle the test/flush HVA (range) family of MMU notifiers. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-14-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMUBen Gardon
In order to interoperate correctly with the rest of KVM and other Linux subsystems, the TDP MMU must correctly handle various MMU notifiers. Add hooks to handle the invalidate range family of MMU notifiers. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-13-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMUBen Gardon
Attach struct kvm_mmu_pages to every page in the TDP MMU to track metadata, facilitate NX reclaim, and enable inproved parallelism of MMU operations in future patches. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-12-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-23kvm: x86/mmu: Add TDP MMU PF handlerBen Gardon
Add functions to handle page faults in the TDP MMU. These page faults are currently handled in much the same way as the x86 shadow paging based MMU, however the ordering of some operations is slightly different. Future patches will add eager NX splitting, a fast page fault handler, and parallel page faults. Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell machine. This series introduced no new failures. This series can be viewed in Gerrit at: https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538 Signed-off-by: Ben Gardon <bgardon@google.com> Message-Id: <20201014182700.2888246-11-bgardon@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>