summaryrefslogtreecommitdiff
path: root/arch/x86/pci
AgeCommit message (Collapse)Author
2015-09-01Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "This updated pull request does not contain the last few GIC related patches which were reported to cause a regression. There is a fix available, but I let it breed for a couple of days first. The irq departement provides: - new infrastructure to support non PCI based MSI interrupts - a couple of new irq chip drivers - the usual pile of fixlets and updates to irq chip drivers - preparatory changes for removal of the irq argument from interrupt flow handlers - preparatory changes to remove IRQF_VALID" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits) irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2 irqchip: Add documentation for the bcm2836 interrupt controller irqchip/bcm2835: Add support for being used as a second level controller irqchip/bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ PCI: xilinx: Fix typo in function name irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance irqchip/gic: Only allow the primary GIC to set the CPU map PCI/MSI: pci-xgene-msi: Consolidate chained IRQ handler install/remove unicore32/irq: Prepare puv3_gpio_handler for irq argument removal tile/pci_gx: Prepare trio_handle_level_irq for irq argument removal m68k/irq: Prepare irq handlers for irq argument removal C6X/megamode-pic: Prepare megamod_irq_cascade for irq argument removal blackfin: Prepare irq handlers for irq argument removal arc/irq: Prepare idu_cascade_isr for irq argument removal sparc/irq: Use access helper irq_data_get_affinity_mask() sparc/irq: Use helper irq_data_get_irq_handler_data() parisc/irq: Use access helper irq_data_get_affinity_mask() mn10300/irq: Use access helper irq_data_get_affinity_mask() irqchip/i8259: Prepare i8259_irq_dispatch for irq argument removal ...
2015-09-01Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 core platform updates from Ingo Molnar: "The main changes are: - Intel Atom platform updates. (Andy Shevchenko) - modularity fixlets. (Paul Gortmaker) - x86 platform clockevents driver updates for lguest, uv and Xen. (Viresh Kumar) - Microsoft Hyper-V TSC fixlet. (Vitaly Kuznetsov)" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/platform: Make atom/pmc_atom.c explicitly non-modular x86/hyperv: Mark the Hyper-V TSC as unstable x86/xen/time: Migrate to new set-state interface x86/uv/time: Migrate to new set-state interface x86/lguest/timer: Migrate to new set-state interface x86/pci/intel_mid_pci: Use proper constants for irq polarity x86/pci/intel_mid_pci: Make intel_mid_pci_ops static x86/pci/intel_mid_pci: Propagate actual return code x86/pci/intel_mid_pci: Work around for IRQ0 assignment x86/platform/iosf_mbi: Add Intel Tangier PCI id x86/platform/iosf_mbi: Source cleanup x86/platform/iosf_mbi: Remove NULL pointer checks for pci_dev_put() x86/platform/iosf_mbi: Check return value of debugfs_create properly x86/platform/iosf_mbi: Move to dedicated folder x86/platform/intel/pmc_atom: Move the PMC-Atom code to arch/x86/platform/atom x86/platform/intel/pmc_atom: Add Cherrytrail PMC interface x86/platform/intel/pmc_atom: Supply register mappings via PMC object x86/platform/intel/pmc_atom: Print index of device in loop x86/platform/intel/pmc_atom: Export accessors to PMC registers
2015-08-04Merge branches 'pci/irq', 'pci/misc', 'pci/resource' and ↵Bjorn Helgaas
'pci/virtualization' into next * pci/irq: PCI/MSI: Free legacy IRQ when enabling MSI/MSI-X PCI: Add helpers to manage pci_dev->irq and pci_dev->irq_managed PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq() PCI: Add pcibios_alloc_irq() and pcibios_free_irq() * pci/misc: PCI: Remove unused "pci_probe" flags PCI: Add VPD function 0 quirk for Intel Ethernet devices PCI: Add dev_flags bit to access VPD through function 0 PCI / ACPI: Fix pci_acpi_optimize_delay() comment PCI: Remove a broken link in quirks.c PCI: Remove useless redundant code PCI: Simplify pci_find_(ext_)capability() return value checks PCI: Move PCI_FIND_CAP_TTL to pci.h and use it in quirks PCI: Add pcie_downstream_port() (true for Root and Switch Downstream Ports) PCI: Fix pcie_port_device_resume() comment PCI: Shift PCI_CLASS_NOT_DEFINED consistently with other classes PCI: Revert aeb30016fec3 ("PCI: add Intel USB specific reset method") PCI: Fix TI816X class code quirk PCI: Fix generic NCR 53c810 class code quirk PCI: Use PCI_CLASS_SERIAL_USB instead of bare number PCI: Add quirk for Intersil/Techwell TW686[4589] AV capture cards PCI: Remove Intel Cherrytrail D3 delays * pci/resource: PCI: Call pci_read_bridge_bases() from core instead of arch code * pci/virtualization: PCI: Restore ACS configuration as part of pci_restore_state()
2015-07-30PCI: Add helpers to manage pci_dev->irq and pci_dev->irq_managedJiang Liu
Add pci_has_managed_irq(), pci_set_managed_irq(), and pci_reset_managed_irq() to simplify code. No functional change. [bhelgaas: changelog] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-30PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()Jiang Liu
To support IOAPIC hotplug, we need to allocate PCI IRQ resources on demand and free them when not used anymore. Implement pcibios_alloc_irq() and pcibios_free_irq() to dynamically allocate and free PCI IRQs. Remove mp_should_keep_irq(), which is no longer used. [bhelgaas: changelog] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-29x86/pci/intel_mid_pci: Use proper constants for irq polarityThomas Gleixner
polarity = 0 means active high. Not really intuitive, so people add comments to it instead of just using a self explaining constant. Use the IOAPIC_POL_ constants and get rid of those horrible to read tail comments. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com>
2015-07-29x86/pci/intel_mid_pci: Make intel_mid_pci_ops staticAndy Shevchenko
This fixes the following sparse warning. arch/x86/pci/intel_mid_pci.c:265:16: warning: symbol 'intel_mid_pci_ops' was not declared. Should it be static? Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1438161409-4671-4-git-send-email-andriy.shevchenko@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-29x86/pci/intel_mid_pci: Propagate actual return codeAndy Shevchenko
mp_map_gsi_to_irq() returns different codes if it fails. intel_mid_pci_irq_enable() hides this under -EBUSY. Return the actual failure code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1438161409-4671-3-git-send-email-andriy.shevchenko@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-29x86/pci/intel_mid_pci: Work around for IRQ0 assignmentAndy Shevchenko
On Intel Tangier the MMC host controller is wired up to irq 0. But several other devices have irq 0 associated as well due to a bogus PCI configuration. The first initialized driver will acquire irq 0 and make it unavailable for other devices. If the sdhci driver is not the first one it will fail to acquire the interrupt and therefor be non functional. Add a quirk to the pci irq enable function which denies irq 0 to anything else than the MMC host controller driver on Tangier platforms. Fixes: 90b9aacf912a (serial: 8250_pci: add Intel Tangier support) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1438161409-4671-2-git-send-email-andriy.shevchenko@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-23PCI: Call pci_read_bridge_bases() from core instead of arch codeLorenzo Pieralisi
When we scan a PCI bus, we read PCI-PCI bridge window registers with pci_read_bridge_bases() so we can validate the resource hierarchy. Most architectures call pci_read_bridge_bases() from pcibios_fixup_bus(), but PCI-PCI bridges are not arch-specific, so this doesn't need to be in arch-specific code. Call pci_read_bridge_bases() directly from the PCI core instead of from arch code. For alpha and mips, we now call pci_read_bridge_bases() always; previously we only called it if PCI_PROBE_ONLY was set. [bhelgaas: changelog] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: James E.J. Bottomley <jejb@parisc-linux.org> CC: Michael Ellerman <mpe@ellerman.id.au> CC: Bjorn Helgaas <bhelgaas@google.com> CC: Richard Henderson <rth@twiddle.net> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: David Howells <dhowells@redhat.com> CC: Russell King <linux@arm.linux.org.uk> CC: Tony Luck <tony.luck@intel.com> CC: David S. Miller <davem@davemloft.net> CC: Ingo Molnar <mingo@redhat.com> CC: Guenter Roeck <linux@roeck-us.net> CC: Michal Simek <monstr@monstr.eu> CC: Chris Zankel <chris@zankel.net>
2015-07-22x86/PCI: Use for_pci_msi_entry() to access MSI device listJiang Liu
Use accessor for_each_pci_msi_entry() to access MSI device list, so we could easily move msi_list from struct pci_dev into struct device later. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: xen-devel@lists.xenproject.org Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Stuart Yoder <stuart.yoder@freescale.com> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/1436428847-8886-6-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-14PCI: Fix generic NCR 53c810 class code quirkBjorn Helgaas
In the generic quirk fixup_rev1_53c810(), added by a5312e28c195 ("[PATCH] PCI: NCR 53c810 quirk"), we assigned "class = PCI_CLASS_STORAGE_SCSI". But PCI_CLASS_STORAGE_SCSI is only the two-byte base class/sub-class and needs to be shifted to make space for the low-order interface byte. Furthermore, we had a similar quirk, pci_fixup_ncr53c810(), for arch/x86, which assigned class correctly. The arch code is linked before the PCI core, so arch quirks run before generic quirks. Therefore, on x86, the x86 arch quirk ran first, and the generic quirk did nothing because it saw that dev->class was already set. But on other arches, the generic quirk set the wrong class code. Fix the generic quirk to set the correct class code and remove the now-unnecessary x86-specific quirk. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Matthew Wilcox <matthew@wil.cx>
2015-06-23Merge tag 'pci-v4.2-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for the v4.2 merge window: Enumeration - Move pci_ari_enabled() to global header (Alex Williamson) - Account for ARI in _PRT lookups (Alex Williamson) - Remove unused pci_scan_bus_parented() (Yijing Wang) Resource management - Use host bridge _CRS info on systems with >32 bit addressing (Bjorn Helgaas) - Use host bridge _CRS info on Foxconn K8M890-8237A (Bjorn Helgaas) - Fix pci_address_to_pio() conversion of CPU address to I/O port (Zhichang Yuan) - Add pci_bus_addr_t (Yinghai Lu) PCI device hotplug - Wait for pciehp command completion where necessary (Alex Williamson) - Drop pointless ACPI-based "slot detection" check (Rafael J. Wysocki) - Check ignore_hotplug for all downstream devices (Rafael J. Wysocki) - Propagate the "ignore hotplug" setting to parent (Rafael J. Wysocki) - Inline pciehp "handle event" functions into the ISR (Bjorn Helgaas) - Clean up pciehp debug logging (Bjorn Helgaas) Power management - Remove redundant PCIe port type checking (Yijing Wang) - Add dev->has_secondary_link to track downstream PCIe links (Yijing Wang) - Use dev->has_secondary_link to find downstream links for ASPM (Yijing Wang) - Drop __pci_disable_link_state() useless "force" parameter (Bjorn Helgaas) - Simplify Clock Power Management setting (Bjorn Helgaas) Virtualization - Add ACS quirks for Intel 9-series PCH root ports (Alex Williamson) - Add function 1 DMA alias quirk for Marvell 9120 (Sakari Ailus) MSI - Disable MSI at enumeration even if kernel doesn't support MSI (Michael S. Tsirkin) - Remove unused pci_msi_off() (Bjorn Helgaas) - Rename msi_set_enable(), msix_clear_and_set_ctrl() (Michael S. Tsirkin) - Export pci_msi_set_enable(), pci_msix_clear_and_set_ctrl() (Michael S. Tsirkin) - Drop pci_msi_off() calls during probe (Michael S. Tsirkin) APM X-Gene host bridge driver - Add APM X-Gene v1 PCIe MSI/MSIX termination driver (Duc Dang) - Add APM X-Gene PCIe MSI DTS nodes (Duc Dang) - Disable Configuration Request Retry Status for v1 silicon (Duc Dang) - Allow config access to Root Port even when link is down (Duc Dang) Broadcom iProc host bridge driver - Allow override of device tree IRQ mapping function (Hauke Mehrtens) - Add BCMA PCIe driver (Hauke Mehrtens) - Directly add PCI resources (Hauke Mehrtens) - Free resource list after registration (Hauke Mehrtens) Freescale i.MX6 host bridge driver - Add speed change timeout message (Troy Kisky) - Rename imx6_pcie_start_link() to imx6_pcie_establish_link() (Bjorn Helgaas) Freescale Layerscape host bridge driver - Use dw_pcie_link_up() consistently (Bjorn Helgaas) - Factor out ls_pcie_establish_link() (Bjorn Helgaas) Marvell MVEBU host bridge driver - Remove mvebu_pcie_scan_bus() (Yijing Wang) NVIDIA Tegra host bridge driver - Remove tegra_pcie_scan_bus() (Yijing Wang) Synopsys DesignWare host bridge driver - Consolidate outbound iATU programming functions (Jisheng Zhang) - Use iATU0 for cfg and IO, iATU1 for MEM (Jisheng Zhang) - Add support for x8 links (Zhou Wang) - Wait for link to come up with consistent style (Bjorn Helgaas) - Use pci_scan_root_bus() for simplicity (Yijing Wang) TI DRA7xx host bridge driver - Use dw_pcie_link_up() consistently (Bjorn Helgaas) Miscellaneous - Include <linux/pci.h>, not <asm/pci.h> (Bjorn Helgaas) - Remove unnecessary #includes of <asm/pci.h> (Bjorn Helgaas) - Remove unused pcibios_select_root() (again) (Bjorn Helgaas) - Remove unused pci_dma_burst_advice() (Bjorn Helgaas) - xen/pcifront: Don't use deprecated function pci_scan_bus_parented() (Arnd Bergmann)" * tag 'pci-v4.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (58 commits) PCI: pciehp: Inline the "handle event" functions into the ISR PCI: pciehp: Rename queue_interrupt_event() to pciehp_queue_interrupt_event() PCI: pciehp: Make queue_interrupt_event() void PCI: xgene: Allow config access to Root Port even when link is down PCI: xgene: Disable Configuration Request Retry Status for v1 silicon PCI: pciehp: Clean up debug logging x86/PCI: Use host bridge _CRS info on systems with >32 bit addressing PCI: imx6: Add #define PCIE_RC_LCSR PCI: imx6: Use "u32", not "uint32_t" PCI: Remove unused pci_scan_bus_parented() xen/pcifront: Don't use deprecated function pci_scan_bus_parented() PCI: imx6: Add speed change timeout message PCI/ASPM: Simplify Clock Power Management setting PCI: designware: Wait for link to come up with consistent style PCI: layerscape: Factor out ls_pcie_establish_link() PCI: layerscape: Use dw_pcie_link_up() consistently PCI: dra7xx: Use dw_pcie_link_up() consistently x86/PCI: Use host bridge _CRS info on Foxconn K8M890-8237A PCI: pciehp: Wait for hotplug command completion where necessary PCI: Remove unused pci_dma_burst_advice() ...
2015-06-17x86/PCI: Use host bridge _CRS info on systems with >32 bit addressingBjorn Helgaas
We enable _CRS on all systems from 2008 and later. On older systems, we ignore _CRS and assume the whole physical address space (excluding RAM and other devices) is available for PCI devices, but on systems that support physical address spaces larger than 4GB, it's doubtful that the area above 4GB is really available for PCI. After d56dbf5bab8c ("PCI: Allocate 64-bit BARs above 4G when possible"), we try to use that space above 4GB *first*, so we're more likely to put a device there. On Juan's Toshiba Satellite Pro U200, BIOS left the graphics, sound, 1394, and card reader devices unassigned (but only after Windows had been booted). Only the sound device had a 64-bit BAR, so it was the only device placed above 4GB, and hence the only device that didn't work. Keep _CRS enabled even on pre-2008 systems if they support physical address space larger than 4GB. Fixes: d56dbf5bab8c ("PCI: Allocate 64-bit BARs above 4G when possible") Reported-and-tested-by: Juan Dayer <jdayer@outlook.com> Reported-and-tested-by: Alan Horsfield <alan@hazelgarth.co.uk> Link: https://bugzilla.kernel.org/show_bug.cgi?id=99221 Link: https://bugzilla.opensuse.org/show_bug.cgi?id=907092 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.14+
2015-06-09x86/PCI: Use host bridge _CRS info on Foxconn K8M890-8237ABjorn Helgaas
The Foxconn K8M890-8237A has two PCI host bridges, and we can't assign resources correctly without the information from _CRS that tells us which address ranges are claimed by which bridge. In the bugs mentioned below, we incorrectly assign a sound card address (this example is from 1033299): bus: 00 index 2 [mem 0x80000000-0xfcffffffff] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f]) pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xbfefffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored) ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff]) pci_root PNP0A08:01: host bridge window [mem 0xbff00000-0xbfffffff] (ignored) pci 0000:80:01.0: [1106:3288] type 0 class 0x000403 pci 0000:80:01.0: reg 10: [mem 0xbfffc000-0xbfffffff 64bit] pci 0000:80:01.0: address space collision: [mem 0xbfffc000-0xbfffffff 64bit] conflicts with PCI Bus #00 [mem 0x80000000-0xfcffffffff] pci 0000:80:01.0: BAR 0: assigned [mem 0xfd00000000-0xfd00003fff 64bit] BUG: unable to handle kernel paging request at ffffc90000378000 IP: [<ffffffffa0345f63>] azx_create+0x37c/0x822 [snd_hda_intel] We assigned 0xfd_0000_0000, but that is not in any of the host bridge windows, and the sound card doesn't work. Turn on pci=use_crs automatically for this system. Link: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/931368 Link: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1033299 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org
2015-06-03Merge branches 'x86/mm', 'x86/build', 'x86/apic' and 'x86/platform' into ↵Ingo Molnar
x86/core, to apply dependent patch Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-28PCI / ACPI: Do not set ACPI companions for host bridges with parentsRafael J. Wysocki
Commit 97badf873ab6 (device property: Make it possible to use secondary firmware nodes) uncovered a bug in the x86 (and ia64) PCI host bridge initialization code that assumes bridge->bus->sysdata to always point to a struct pci_sysdata object which need not be the case (in particular, the Xen PCI frontend driver sets it to point to a different data type). If it is not the case, an incorrect pointer (or a piece of data that is not a pointer at all) will be passed to ACPI_COMPANION_SET() and that may cause interesting breakage to happen going forward. To work around this problem use the observation that the ACPI host bridge initialization always passes NULL as parent to pci_create_root_bus(), so if pcibios_root_bridge_prepare() sees a non-NULL parent of the bridge, it should not attempt to set an ACPI companion for it, because that means that pci_create_root_bus() has been called by someone else. Fixes: 97badf873ab6 (device property: Make it possible to use secondary firmware nodes) Reported-and-tested-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2015-05-27x86/mm/pat: Wrap pat_enabled into a function APILuis R. Rodriguez
We use pat_enabled in x86-specific code to see if PAT is enabled or not but we're granting full access to it even though readers do not need to set it. If, for instance, we granted access to it to modules later they then could override the variable setting... no bueno. This renames pat_enabled to a new static variable __pat_enabled. Folks are redirected to use pat_enabled() now. Code that sets this can only be internal to pat.c. Apart from the early kernel parameter "nopat" to disable PAT, we also have a few cases that disable it later and make use of a helper pat_disable(). It is wrapped under an ifdef but since that code cannot run unless PAT was enabled its not required to wrap it with ifdefs, unwrap that. Likewise, since "nopat" doesn't really change non-PAT systems just remove that ifdef as well. Although we could add and use an early_param_off(), these helpers don't use __read_mostly but we want to keep __read_mostly for __pat_enabled as this is a hot path -- upon boot, for instance, a simple guest may see ~4k accesses to pat_enabled(). Since __read_mostly early boot params are not that common we don't add a helper for them just yet. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Doug Ledford <dledford@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kyle McMartin <kyle@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1430425520-22275-3-git-send-email-mcgrof@do-not-panic.com Link: http://lkml.kernel.org/r/1432628901-18044-13-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-19x86: Rename eisa_set_level_irq to elcr_set_level_irqPaul Gortmaker
This routine has been around for over a decade, but with EISA being dead and abandoned for about twice that long, the name can be kind of confusing. The function is going at the PIC Edge/Level Configuration Registers (ELCR), so rename it as such and mentally decouple it from the long since dead EISA bus. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Reviewed-by: Maciej W. Rozycki <macro@linux-mips.org> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Len Brown <len.brown@intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/1431217657-934-1-git-send-email-paul.gortmaker@windriver.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-11Merge branch 'x86/asm' into x86/apic, to resolve a conflictIngo Molnar
Conflicts: arch/x86/kernel/apic/io_apic.c arch/x86/kernel/apic/vector.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-30x86/PCI/ACPI: Make all resources except [io 0xcf8-0xcff] available on PCI busJiang Liu
An IO port or MMIO resource assigned to a PCI host bridge may be consumed by the host bridge itself or available to its child bus/devices. The ACPI specification defines a bit (Producer/Consumer) to tell whether the resource is consumed by the host bridge itself, but firmware hasn't used that bit consistently, so we can't rely on it. Before commit 593669c2ac0f ("x86/PCI/ACPI: Use common ACPI resource interfaces to simplify implementation"), arch/x86/pci/acpi.c ignored all IO port resources defined by acpi_resource_io and acpi_resource_fixed_io to filter out IO ports consumed by the host bridge itself. Commit 593669c2ac0f ("x86/PCI/ACPI: Use common ACPI resource interfaces to simplify implementation") started accepting all IO port and MMIO resources, which caused a regression that IO port resources consumed by the host bridge itself became available to its child devices. Then commit 63f1789ec716 ("x86/PCI/ACPI: Ignore resources consumed by host bridge itself") ignored resources consumed by the host bridge itself by checking the IORESOURCE_WINDOW flag, which accidently removed MMIO resources defined by acpi_resource_memory24, acpi_resource_memory32 and acpi_resource_fixed_memory32. On x86 and IA64 platforms, all IO port and MMIO resources are assumed to be available to child bus/devices except one special case: IO port [0xCF8-0xCFF] is consumed by the host bridge itself to access PCI configuration space. So explicitly filter out PCI CFG IO ports[0xCF8-0xCFF]. This solution will also ease the way to consolidate ACPI PCI host bridge common code from x86, ia64 and ARM64. Related ACPI table are archived at: https://bugzilla.kernel.org/show_bug.cgi?id=94221 Related discussions at: http://patchwork.ozlabs.org/patch/461633/ https://lkml.org/lkml/2015/3/29/304 Fixes: 63f1789ec716 (Ignore resources consumed by host bridge itself) Reported-by: Bernhard Thaler <bernhard.thaler@wvnet.at> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: 4.0+ <stable@vger.kernel.org> # 4.0+ Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-24x86/irq: Convert IOAPIC to use hierarchical irqdomain interfacesJiang Liu
Convert IOAPIC driver to support and use hierarchical irqdomain interfaces. It's a little big, but would break bisecting if we split it into multiple patches. Fold in a patch from Andy Shevchenko <andriy.shevchenko@linux.intel.com> to make it bisectable. http://lkml.org/lkml/2014/12/10/622 Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Tested-by: Joerg Roedel <jroedel@suse.de> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Sander Eikelenboom <linux@eikelenboom.it> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: sfi-devel@simplefirmware.org Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dimitri Sivanich <sivanich@sgi.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: David Cohen <david.a.cohen@linux.intel.com> Link: http://lkml.kernel.org/r/1428905519-23704-38-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-24x86/irq: Prepare IOAPIC interfaces to support hierarchical irqdomainsJiang Liu
Introduce helper functions to manipulate struct irq_alloc_info for IOAPIC. Also add an extra parameter to IOAPIC interfaces to prepare for hierarchical irqdomain. Function mp_set_gsi_attr() will be removed once we have switched to hierarchical irqdomains. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Tested-by: Joerg Roedel <jroedel@suse.de> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Sander Eikelenboom <linux@eikelenboom.it> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dimitri Sivanich <sivanich@sgi.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Jan Beulich <JBeulich@suse.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: David Cohen <david.a.cohen@linux.intel.com> Link: http://lkml.kernel.org/r/1428905519-23704-33-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-13Merge tag 'pci-v4.1-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Enumeration - Read capability list as dwords, not bytes (Sean O. Stalley) Resource management - Don't check for PNP overlaps with unassigned PCI BARs (Bjorn Helgaas) - Mark invalid BARs as unassigned (Bjorn Helgaas) - Show driver, BAR#, and resource on pci_ioremap_bar() failure (Bjorn Helgaas) - Fail pci_ioremap_bar() on unassigned resources (Bjorn Helgaas) - Assign resources before drivers claim devices (Yijing Wang) - Claim bus resources before pci_bus_add_devices() (Yijing Wang) Power management - Optimize device state transition delays (Aaron Lu) - Don't clear ASPM bits when the FADT declares it's unsupported (Matthew Garrett) Virtualization - Add ACS quirks for Intel 1G NICs (Alex Williamson) IOMMU - Add ptr to OF node arg to of_iommu_configure() (Murali Karicheri) - Move of_dma_configure() to device.c to help re-use (Murali Karicheri) - Fix size when dma-range is not used (Murali Karicheri) - Add helper functions pci_get[put]_host_bridge_device() (Murali Karicheri) - Add of_pci_dma_configure() to update DMA configuration (Murali Karicheri) - Update DMA configuration from DT (Murali Karicheri) - dma-mapping: limit IOMMU mapping size (Murali Karicheri) - Calculate device DMA masks based on DT dma-range size (Murali Karicheri) ARM Versatile host bridge driver - Check for devm_ioremap_resource() failures (Jisheng Zhang) Broadcom iProc host bridge driver - Add Broadcom iProc PCIe driver (Ray Jui) Marvell MVEBU host bridge driver - Add suspend/resume support (Thomas Petazzoni) Renesas R-Car host bridge driver - Fix position of MSI enable bit (Nobuhiro Iwamatsu) - Write zeroes to reserved PCIEPARL bits (Nobuhiro Iwamatsu) - Change PCIEPARL and PCIEPARH to PCIEPALR and PCIEPAUR (Nobuhiro Iwamatsu) - Verify that mem_res is 64K-aligned (Nobuhiro Iwamatsu) Samsung Exynos host bridge driver - Fix INTx enablement statement termination error (Jaehoon Chung) Miscellaneous - Make a shareable UUID for PCI firmware ACPI _DSM (Aaron Lu) - Clarify policy for vendor IDs in pci.txt (Michael S. Tsirkin)" * tag 'pci-v4.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (36 commits) PCI: Read capability list as dwords, not bytes PCI: layerscape: Simplify platform_get_resource_byname() failure checking PCI: keystone: Don't dereference possible NULL pointer PCI: versatile: Check for devm_ioremap_resource() failures PCI: Don't clear ASPM bits when the FADT declares it's unsupported PCI: Clarify policy for vendor IDs in pci.txt PCI/ACPI: Optimize device state transition delays PCI: Export pci_find_host_bridge() for use inside PCI core PCI: Make a shareable UUID for PCI firmware ACPI _DSM PCI: Fix typo in Thunderbolt kernel message PCI: exynos: Fix INTx enablement statement termination error PCI: iproc: Add Broadcom iProc PCIe support PCI: iproc: Add DT docs for Broadcom iProc PCIe driver PCI: Export symbols required for loadable host driver modules PCI: Add ACS quirks for Intel 1G NICs PCI: mvebu: Add suspend/resume support PCI: Cleanup control flow sparc/PCI: Claim bus resources before pci_bus_add_devices() PCI: Assign resources before drivers claim devices (pci_scan_root_bus()) PCI: Fail pci_ioremap_bar() on unassigned resources ...
2015-03-23Merge branches 'pci/enumeration' and 'pci/virtualization' into nextBjorn Helgaas
* pci/enumeration: PCI: Cleanup control flow sparc/PCI: Claim bus resources before pci_bus_add_devices() PCI: Assign resources before drivers claim devices (pci_scan_root_bus()) PCI: Assign resources before drivers claim devices (pci_scan_bus()) * pci/virtualization: PCI: Add ACS quirks for Intel 1G NICs
2015-03-20Revert "x86/PCI: Refine the way to release PCI IRQ resources"Rafael J. Wysocki
Commit b4b55cda5874 (Refine the way to release PCI IRQ resources) introduced a regression in the PCI IRQ resource management by causing the IRQ resource of a device, established when pci_enabled_device() is called on a fully disabled device, to be released when the driver is unbound from the device, regardless of the enable_cnt. This leads to the situation that an ill-behaved driver can now make a device unusable to subsequent drivers by an imbalance in their use of pci_enable/disable_device(). That is a serious problem for secondary drivers like vfio-pci, which are innocent of the transgressions of the previous driver. Since the solution of this problem is not immediate and requires further discussion, revert commit b4b55cda5874 and the issue it was supposed to address (a bug related to xen-pciback) will be taken care of in a different way going forward. Reported-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-19PCI: Assign resources before drivers claim devices (pci_scan_root_bus())Yijing Wang
Previously, pci_scan_root_bus() created a root PCI bus, enumerated the devices on it, and called pci_bus_add_devices(), which made the devices available for drivers to claim them. Most callers assigned resources to devices after pci_scan_root_bus() returns, which may be after drivers have claimed the devices. This is incorrect; the PCI core should not change device resources while a driver is managing the device. Remove pci_bus_add_devices() from pci_scan_root_bus() and do it after any resource assignment in the callers. Note that ARM's pci_common_init_dev() already called pci_bus_add_devices() after pci_scan_root_bus(), so we only need to remove the first call: pci_common_init_dev pcibios_init_hw pci_scan_root_bus pci_bus_add_devices # first call pci_bus_assign_resources pci_bus_add_devices # second call [bhelgaas: changelog, drop "root_bus" var in alpha common_init_pci(), return failure earlier in mn10300, add "return" in x86 pcibios_scan_root(), return early if xtensa platform_pcibios_fixup() fails] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Richard Henderson <rth@twiddle.net> CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru> CC: Matt Turner <mattst88@gmail.com> CC: David Howells <dhowells@redhat.com> CC: Tony Luck <tony.luck@intel.com> CC: Michal Simek <monstr@monstr.eu> CC: Ralf Baechle <ralf@linux-mips.org> CC: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> CC: Sebastian Ott <sebott@linux.vnet.ibm.com> CC: "David S. Miller" <davem@davemloft.net> CC: Chris Metcalf <cmetcalf@ezchip.com> CC: Chris Zankel <chris@zankel.net> CC: Max Filippov <jcmvbkbc@gmail.com> CC: Thomas Gleixner <tglx@linutronix.de>
2015-03-04x86/PCI/ACPI: Ignore resources consumed by host bridge itselfJiang Liu
When parsing resources for PCI host bridge, we should ignore resources consumed by host bridge itself and only report window resources available to child PCI busses. Fixes: 593669c2ac0f (x86/PCI/ACPI: Use common ACPI resource interfaces ...) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-10Merge tag 'pm+acpi-3.20-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "We have a few new features this time, including a new SFI-based cpufreq driver, a new devfreq driver for Tegra Activity Monitor, a new devfreq class for providing its governors with raw utilization data and a new ACPI driver for AMD SoCs. Still, the majority of changes here are reworks of existing code to make it more straightforward or to prepare it for implementing new features on top of it. The primary example is the rework of ACPI resources handling from Jiang Liu, Thomas Gleixner and Lv Zheng with support for IOAPIC hotplug implemented on top of it, but there is quite a number of changes of this kind in the cpufreq core, ACPICA, ACPI EC driver, ACPI processor driver and the generic power domains core code too. The most active developer is Viresh Kumar with his cpufreq changes. Specifics: - Rework of the core ACPI resources parsing code to fix issues in it and make using resource offsets more convenient and consolidation of some resource-handing code in a couple of places that have grown analagous data structures and code to cover the the same gap in the core (Jiang Liu, Thomas Gleixner, Lv Zheng). - ACPI-based IOAPIC hotplug support on top of the resources handling rework (Jiang Liu, Yinghai Lu). - ACPICA update to upstream release 20150204 including an interrupt handling rework that allows drivers to install raw handlers for ACPI GPEs which then become entirely responsible for the given GPE and the ACPICA core code won't touch it (Lv Zheng, David E Box, Octavian Purdila). - ACPI EC driver rework to fix several concurrency issues and other problems related to events handling on top of the ACPICA's new support for raw GPE handlers (Lv Zheng). - New ACPI driver for AMD SoCs analogous to the LPSS (Low-Power Subsystem) driver for Intel chips (Ken Xue). - Two minor fixes of the ACPI LPSS driver (Heikki Krogerus, Jarkko Nikula). - Two new blacklist entries for machines (Samsung 730U3E/740U3E and 510R) where the native backlight interface doesn't work correctly while the ACPI one does (Hans de Goede). - Rework of the ACPI processor driver's handling of idle states to make the code more straightforward and less bloated overall (Rafael J Wysocki). - Assorted minor fixes related to ACPI and SFI (Andreas Ruprecht, Andy Shevchenko, Hanjun Guo, Jan Beulich, Rafael J Wysocki, Yaowei Bai). - PCI core power management modification to avoid resuming (some) runtime-suspended devices during system suspend if they are in the right states already (Rafael J Wysocki). - New SFI-based cpufreq driver for Intel platforms using SFI (Srinidhi Kasagar). - cpufreq core fixes, cleanups and simplifications (Viresh Kumar, Doug Anderson, Wolfram Sang). - SkyLake CPU support and other updates for the intel_pstate driver (Kristen Carlson Accardi, Srinivas Pandruvada). - cpufreq-dt driver cleanup (Markus Elfring). - Init fix for the ARM big.LITTLE cpuidle driver (Sudeep Holla). - Generic power domains core code fixes and cleanups (Ulf Hansson). - Operating Performance Points (OPP) core code cleanups and kernel documentation update (Nishanth Menon). - New dabugfs interface to make the list of PM QoS constraints available to user space (Nishanth Menon). - New devfreq driver for Tegra Activity Monitor (Tomeu Vizoso). - New devfreq class (devfreq_event) to provide raw utilization data to devfreq governors (Chanwoo Choi). - Assorted minor fixes and cleanups related to power management (Andreas Ruprecht, Krzysztof Kozlowski, Rickard Strandqvist, Pavel Machek, Todd E Brandt, Wonhong Kwon). - turbostat updates (Len Brown) and cpupower Makefile improvement (Sriram Raghunathan)" * tag 'pm+acpi-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (151 commits) tools/power turbostat: relax dependency on APERF_MSR tools/power turbostat: relax dependency on invariant TSC Merge branch 'pci/host-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into acpi-resources tools/power turbostat: decode MSR_*_PERF_LIMIT_REASONS tools/power turbostat: relax dependency on root permission ACPI / video: Add disable_native_backlight quirk for Samsung 510R ACPI / PM: Remove unneeded nested #ifdef USB / PM: Remove unneeded #ifdef and associated dead code intel_pstate: provide option to only use intel_pstate with HWP ACPI / EC: Add GPE reference counting debugging messages ACPI / EC: Add query flushing support ACPI / EC: Refine command storm prevention support ACPI / EC: Add command flushing support. ACPI / EC: Introduce STARTED/STOPPED flags to replace BLOCKED flag ACPI: add AMD ACPI2Platform device support for x86 system ACPI / table: remove duplicate NULL check for the handler of acpi_table_parse() ACPI / EC: Update revision due to raw handler mode. ACPI / EC: Reduce ec_poll() by referencing the last register access timestamp. ACPI / EC: Fix several GPE handling issues by deploying ACPI_GPE_DISPATCH_RAW_HANDLER mode. ACPICA: Events: Enable APIs to allow interrupt/polling adaptive request based GPE handling model ...
2015-02-10Merge tag 'pci-v3.20-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Enumeration - Move domain assignment from arm64 to generic code (Lorenzo Pieralisi) - ARM: Remove artificial dependency on pci_sys_data domain (Lorenzo Pieralisi) - ARM: Move to generic PCI domains (Lorenzo Pieralisi) - Generate uppercase hex for modalias var in uevent (Ricardo Ribalda Delgado) - Add and use generic config accessors on ARM, PowerPC (Rob Herring) Resource management - Free resources on failure in of_pci_get_host_bridge_resources() (Lorenzo Pieralisi) - Fix infinite loop with ROM image of size 0 (Michel Dänzer) PCI device hotplug - Handle surprise add even if surprise removal isn't supported (Bjorn Helgaas) Virtualization - Mark AMD/ATI VGA devices that don't reset on D3hot->D0 transition (Alex Williamson) - Add DMA alias quirk for Adaptec 3405 (Alex Williamson) - Add Wellsburg (X99) to Intel PCH root port ACS quirk (Alex Williamson) - Add ACS quirk for Emulex NICs (Vasundhara Volam) MSI - Fail MSI-X mappings if there's no space assigned to MSI-X BAR (Yijing Wang) Freescale Layerscape host bridge driver - Fix platform_no_drv_owner.cocci warnings (Julia Lawall) NVIDIA Tegra host bridge driver - Remove unnecessary tegra_pcie_fixup_bridge() (Lucas Stach) Renesas R-Car host bridge driver - Fix error handling of irq_of_parse_and_map() (Dmitry Torokhov) TI Keystone host bridge driver - Fix error handling of irq_of_parse_and_map() (Dmitry Torokhov) - Fix misspelling of current function in debug output (Julia Lawall) Xilinx AXI host bridge driver - Fix harmless format string warning (Arnd Bergmann) Miscellaneous - Use standard parsing functions for ASPM sysfs setters (Chris J Arges) - Add pci_device_to_OF_node() stub for !CONFIG_OF (Kevin Hao) - Delete unnecessary NULL pointer checks (Markus Elfring) - Add and use defines for PCIe Max_Read_Request_Size (Rafał Miłecki) - Include clk.h instead of clk-private.h (Stephen Boyd)" * tag 'pci-v3.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits) PCI: Add pci_device_to_OF_node() stub for !CONFIG_OF PCI: xilinx: Convert to use generic config accessors PCI: xgene: Convert to use generic config accessors PCI: tegra: Convert to use generic config accessors PCI: rcar: Convert to use generic config accessors PCI: generic: Convert to use generic config accessors powerpc/powermac: Convert PCI to use generic config accessors powerpc/fsl_pci: Convert PCI to use generic config accessors ARM: ks8695: Convert PCI to use generic config accessors ARM: sa1100: Convert PCI to use generic config accessors ARM: integrator: Convert PCI to use generic config accessors PCI: versatile: Add DT-based ARM Versatile PB PCIe host driver ARM: dts: versatile: add PCI controller binding of/pci: Free resources on failure in of_pci_get_host_bridge_resources() PCI: versatile: Add DT docs for ARM Versatile PB PCIe driver PCI: Fail MSI-X mappings if there's no space assigned to MSI-X BAR r8169: use PCI define for Max_Read_Request_Size [SCSI] esas2r: use PCI define for Max_Read_Request_Size tile: use PCI define for Max_Read_Request_Size rapidio/tsi721: use PCI define for Max_Read_Request_Size ...
2015-02-10Merge branch 'acpi-resources'Rafael J. Wysocki
* acpi-resources: (23 commits) Merge branch 'pci/host-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into acpi-resources x86/irq, ACPI: Implement ACPI driver to support IOAPIC hotplug ACPI: Add interfaces to parse IOAPIC ID for IOAPIC hotplug x86/PCI: Refine the way to release PCI IRQ resources x86/PCI/ACPI: Use common ACPI resource interfaces to simplify implementation x86/PCI: Fix the range check for IO resources PCI: Use common resource list management code instead of private implementation resources: Move struct resource_list_entry from ACPI into resource core ACPI: Introduce helper function acpi_dev_filter_resource_type() ACPI: Add field offset to struct resource_list_entry ACPI: Translate resource into master side address for bridge window resources ACPI: Return translation offset when parsing ACPI address space resources ACPI: Enforce stricter checks for address space descriptors ACPI: Set flag IORESOURCE_UNSET for unassigned resources ACPI: Normalize return value of resource parser functions ACPI: Fix a bug in parsing ACPI Memory24 resource ACPI: Add prefetch decoding to the address space parser ACPI: Move the window flag logic to the combined parser ACPI: Unify the parsing of address_space and ext_address_space ACPI: Let the parser return false for disabled resources ...
2015-02-10Merge branch 'acpica'Rafael J. Wysocki
* acpica: ACPICA: Events: Enable APIs to allow interrupt/polling adaptive request based GPE handling model ACPICA: Events: Introduce acpi_set_gpe()/acpi_finish_gpe() to reduce divergences ACPICA: Events: Introduce ACPI_GPE_DISPATCH_RAW_HANDLER to fix 2 issues for the current GPE APIs ACPICA: Update version to 20150204 ACPICA: Update Copyright headers to 2015 ACPICA: Hardware: Cast GPE enable_mask before storing ACPICA: Events: Cleanup GPE dispatcher type obtaining code ACPICA: Events: Cleanup to move acpi_gbl_global_event_handler invocation out of acpi_ev_gpe_dispatch() ACPICA: Events: Cleanup of resetting the GPE handler to NULL before removing ACPICA: Events: Fix uninitialized variable ACPICA: Events: Remove acpi_ev_valid_gpe_event() due to current restriction ACPICA: Events: Remove duplicated sanity check in acpi_ev_enable_gpe() ACPICA: Events: Back port "ACPICA: Save current masks of enabled GPEs after enable register writes" ACPICA: Resources: Provide common part for struct acpi_resource_address structures. ACPI: Introduce acpi_unload_parent_table() usages in Linux kernel ACPICA: take ACPI_MTX_INTERPRETER in acpi_unload_table_id()
2015-02-09Merge branch 'x86-ras-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 RAS update from Ingo Molnar: "The changes in this cycle were: - allow mmcfg access to APEI error injection handlers - improve MCE error messages - smaller cleanups" * 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, mce: Fix sparse errors x86, mce: Improve timeout error messages ACPI, EINJ: Enhance error injection tolerance level
2015-02-09Merge tag 'spi-v3.20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The major highlight this release is a refactoring of the core to allow us to run synchronous transfers in the context of the caller when there is no contention for the bus. This improves performance in the very common case by eliminating context switches and reducing the number of hardware setup and teardown operations we need to perform. Other changes: - New drivers for DLN-2 USB-SPI adapter and ST SPI controllers. - A big round of cleanups, performance and feature improvements for the xilinx driver from Ricardo Ribalda Delgado. - A wide range of smaller cleanups, fixes and feature improvements throughout the subsystem" * tag 'spi-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (68 commits) spi: mxs: cleanup wait_for_completion return handling spi: ti-qspi: cleanup wait_for_completion return handling spi: spi-imx: cleanup wait_for_completion handling spi: sh-msiof: cleanup wait_for_completion return handling spi: match var type to return type of wait_for_completion spi: spi-pxa2xx: only include mach/dma.h for legacy DMA spi: atmel: cleanup wait_for_completion return handling spi: fsl-dspi: Remove possible memory leak of 'chip' spi: sh-msiof: Update calculation of frequency dividing spi: spidev: Convert buf pointers for 32-bit compat SPI_IOC_MESSAGE(n) spi/xilinx: Fix access invalid memory on xilinx_spi_tx spi: Revert "spi/xilinx: Remove iowrite/ioread wrappers" spi/xilinx: Check number of slaves range spi/xilinx: Use polling mode on small transfers spi/xilinx: Remove remaining_words driver data variable spi/xilinx: Remove iowrite/ioread wrappers spi/xilinx: Convert bits_per_word in bytes_per_word spi/xilinx: Convert remainding_bytes in remaining words spi/xilinx: Make spi_tx and spi_rx simmetric spi/xilinx: Remove rx_fn and tx_fn pointer ...
2015-02-08Merge remote-tracking branches 'spi/topic/atmel', 'spi/topic/config', ↵Mark Brown
'spi/topic/dln2' and 'spi/topic/dw' into spi-next
2015-02-05Merge tag 'pci-v3.19-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "Enumeration - Scan all device numbers on NEC as well as Stratus (Charlotte Richardson) Resource management - Handle read-only BARs on AMD CS553x devices (Myron Stowe) Synopsys DesignWare - Reject MSI-X IRQs (Lucas Stach)" * tag 'pci-v3.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Handle read-only BARs on AMD CS553x devices PCI: Add NEC variants to Stratus ftServer PCIe DMI check PCI: designware: Reject MSI-X IRQs
2015-02-05x86/PCI: Refine the way to release PCI IRQ resourcesJiang Liu
Some PCI device drivers assume that pci_dev->irq won't change after calling pci_disable_device() and pci_enable_device() during suspend and resume. Commit c03b3b0738a5 ("x86, irq, mpparse: Release IOAPIC pin when PCI device is disabled") frees PCI IRQ resources when pci_disable_device() is called and reallocate IRQ resources when pci_enable_device() is called again. This breaks above assumption. So commit 3eec595235c1 ("x86, irq, PCI: Keep IRQ assignment for PCI devices during suspend/hibernation") and 9eabc99a635a ("x86, irq, PCI: Keep IRQ assignment for runtime power management") fix the issue by avoiding freeing/reallocating IRQ resources during PCI device suspend/resume. They achieve this by checking dev.power.is_prepared and dev.power.runtime_status. PM maintainer, Rafael, then pointed out that it's really an ugly fix which leaking PM internal state information to IRQ subsystem. Recently David Vrabel <david.vrabel@citrix.com> also reports an regression in pciback driver caused by commit cffe0a2b5a34 ("x86, irq: Keep balance of IOAPIC pin reference count"). Please refer to: http://lkml.org/lkml/2015/1/14/546 So this patch refine the way to release PCI IRQ resources. Instead of releasing PCI IRQ resources in pci_disable_device()/ pcibios_disable_device(), we now release it at driver unbinding notification BUS_NOTIFY_UNBOUND_DRIVER. In other word, we only release PCI IRQ resources when there's no driver bound to the PCI device, and it keeps the assumption that pci_dev->irq won't through multiple invocation of pci_enable_device()/pci_disable_device(). Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-05x86/PCI/ACPI: Use common ACPI resource interfaces to simplify implementationJiang Liu
Use common ACPI resource discovery interfaces to simplify PCI host bridge resource enumeration. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-05x86/PCI: Fix the range check for IO resourcesJiang Liu
The range check in setup_res() checks the IO range against iomem_resource. That's just wrong. Reworked based on Thomas original patch. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-05PCI: Use common resource list management code instead of private implementationJiang Liu
Use common resource list management data structure and interfaces instead of private implementation. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-03Merge branch 'acpica' into acpi-resourcesRafael J. Wysocki
2015-02-02PCI: Add NEC variants to Stratus ftServer PCIe DMI checkCharlotte Richardson
NEC OEMs the same platforms as Stratus does, which have multiple devices on some PCIe buses under downstream ports. Link: https://bugzilla.kernel.org/show_bug.cgi?id=51331 Fixes: 1278998f8ff6 ("PCI: Work around Stratus ftServer broken PCIe hierarchy (fix DMI check)") Signed-off-by: Charlotte Richardson <charlotte.richardson@stratus.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.5+ CC: Myron Stowe <myron.stowe@redhat.com>
2015-01-28PCI: Fail MSI-X mappings if there's no space assigned to MSI-X BARYijing Wang
Unlike MSI, which is configured via registers in the MSI capability in Configuration Space, MSI-X is configured via tables in Memory Space. These MSI-X tables are mapped by a device BAR, and if no Memory Space has been assigned to the BAR, MSI-X cannot be used. Fail MSI-X setup if no space has been assigned for the BAR. Previously, we ioremapped the MSI-X table even if the resource hadn't been assigned. In this case, the resource address is undefined (and is often zero), which may lead to warnings or oopses in this path: pci_enable_msix msix_capability_init msix_map_region ioremap_nocache The PCI core sets resource flags to zero when it can't assign space for the resource (see reset_resource()). There are also some cases where it sets the IORESOURCE_UNSET flag, e.g., pci_reassigndev_resource_alignment(), pci_assign_resource(), etc. So we must check for both cases. [bhelgaas: changelog] Reported-by: Zhang Jukuo <zhangjukuo@huawei.com> Tested-by: Zhang Jukuo <zhangjukuo@huawei.com> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-01-26ACPICA: Resources: Provide common part for struct acpi_resource_address ↵Lv Zheng
structures. struct acpi_resource_address and struct acpi_resource_extended_address64 share substracts just at different offsets. To unify the parsing functions, OSPMs like Linux need a new ACPI_ADDRESS64_ATTRIBUTE as their substructs, so they can extract the shared data. This patch also synchronizes the structure changes to the Linux kernel. The usages are searched by matching the following keywords: 1. acpi_resource_address 2. acpi_resource_extended_address 3. ACPI_RESOURCE_TYPE_ADDRESS 4. ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS And we found and fixed the usages in the following files: arch/ia64/kernel/acpi-ext.c arch/ia64/pci/pci.c arch/x86/pci/acpi.c arch/x86/pci/mmconfig-shared.c drivers/xen/xen-acpi-memhotplug.c drivers/acpi/acpi_memhotplug.c drivers/acpi/pci_root.c drivers/acpi/resource.c drivers/char/hpet.c drivers/pnp/pnpacpi/rsparser.c drivers/hv/vmbus_drv.c Build tests are passed with defconfig/allnoconfig/allyesconfig and defconfig+CONFIG_ACPI=n. Original-by: Thomas Gleixner <tglx@linutronix.de> Original-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-01-25Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "Hopefully the last round of fixes for 3.19 - regression fix for the LDT changes - regression fix for XEN interrupt handling caused by the APIC changes - regression fixes for the PAT changes - last minute fixes for new the MPX support - regression fix for 32bit UP - fix for a long standing relocation issue on 64bit tagged for stable - functional fix for the Hyper-V clocksource tagged for stable - downgrade of a pr_err which tends to confuse users Looks a bit on the large side, but almost half of it are valuable comments" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tsc: Change Fast TSC calibration failed from error to info x86/apic: Re-enable PCI_MSI support for non-SMP X86_32 x86, mm: Change cachemode exports to non-gpl x86, tls: Interpret an all-zero struct user_desc as "no segment" x86, tls, ldt: Stop checking lm in LDT_empty x86, mpx: Strictly enforce empty prctl() args x86, mpx: Fix potential performance issue on unmaps x86, mpx: Explicitly disable 32-bit MPX support on 64-bit kernels x86, hyperv: Mark the Hyper-V clocksource as being continuous x86: Don't rely on VMWare emulating PAT MSR correctly x86, irq: Properly tag virtualization entry in /proc/interrupts x86, boot: Skip relocs when load address unchanged x86/xen: Override ACPI IRQ management callback __acpi_unregister_gsi ACPI: pci: Do not clear pci_dev->irq in acpi_pci_irq_disable() x86/xen: Treat SCI interrupt as normal GSI interrupt
2015-01-20x86/xen: Override ACPI IRQ management callback __acpi_unregister_gsiJiang Liu
Xen overrides __acpi_register_gsi and leaves __acpi_unregister_gsi as is. That means, an IRQ allocated by acpi_register_gsi_xen_hvm() or acpi_register_gsi_xen() will be freed by acpi_unregister_gsi_ioapic(), which may cause undesired effects. So override __acpi_unregister_gsi to NULL for safety. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Tested-by: Sander Eikelenboom <linux@eikelenboom.it> Cc: Tony Luck <tony.luck@intel.com> Cc: xen-devel@lists.xenproject.org Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Graeme Gregory <graeme.gregory@linaro.org> Cc: Lv Zheng <lv.zheng@intel.com> Link: http://lkml.kernel.org/r/1421720467-7709-4-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-20x86/xen: Treat SCI interrupt as normal GSI interruptJiang Liu
Currently Xen Domain0 has special treatment for ACPI SCI interrupt, that is initialize irq for ACPI SCI at early stage in a special way as: xen_init_IRQ() ->pci_xen_initial_domain() ->xen_setup_acpi_sci() Allocate and initialize irq for ACPI SCI Function xen_setup_acpi_sci() calls acpi_gsi_to_irq() to get an irq number for ACPI SCI. But unfortunately acpi_gsi_to_irq() depends on IOAPIC irqdomains through following path acpi_gsi_to_irq() ->mp_map_gsi_to_irq() ->mp_map_pin_to_irq() ->check IOAPIC irqdomain For PV domains, it uses Xen event based interrupt manangement and doesn't make uses of native IOAPIC, so no irqdomains created for IOAPIC. This causes Xen domain0 fail to install interrupt handler for ACPI SCI and all ACPI events will be lost. Please refer to: https://lkml.org/lkml/2014/12/19/178 So the fix is to get rid of special treatment for ACPI SCI, just treat ACPI SCI as normal GSI interrupt as: acpi_gsi_to_irq() ->acpi_register_gsi() ->acpi_register_gsi_xen() ->xen_register_gsi() With above change, there's no need for xen_setup_acpi_sci() anymore. The above change also works with bare metal kernel too. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Tested-by: Sander Eikelenboom <linux@eikelenboom.it> Cc: Tony Luck <tony.luck@intel.com> Cc: xen-devel@lists.xenproject.org Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1421720467-7709-2-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-16x86/PCI: Clip bridge windows to fit in upstream windowsYinghai Lu
Every PCI-PCI bridge window should fit inside an upstream bridge window because orphaned address space is unreachable from the primary side of the upstream bridge. If we inherit invalid bridge windows that overlap an upstream window from firmware, clip them to fit and update the bridge accordingly. [bhelgaas: changelog] Link: https://bugzilla.kernel.org/show_bug.cgi?id=85491 Reported-by: Marek Kordik <kordikmarek@gmail.com> Tested-by: Marek Kordik <kordikmarek@gmail.com> Fixes: 5b28541552ef ("PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Thomas Gleixner <tglx@linutronix.de> CC: Ingo Molnar <mingo@redhat.com> CC: "H. Peter Anvin" <hpa@zytor.com> CC: x86@kernel.org CC: stable@vger.kernel.org # v3.16+
2015-01-15Merge tag 'please-pull-einj-mmcfg' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras into x86/ras Pull RAS update from Tony Luck: "When checking addresses in APEI action entries for validity, allow access to the mmcfg space - some error injection functions need to do this." Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-07spi: dw-pci: describe Intel MID controllers betterAndy Shevchenko
There are more that one SPI controller on the Intel MID boards. This patch describes the status and IDs of them. From now on we also have to care about bus number that must be unique per host. According to the specification the SPI1 has 5 bits for chip selects and SPI2 only 2 bits. The patch makes it depend to PCI ID. The first controller (SPI1) is DMA capable, meanwhile SPI2 can share same channels (via software switch) such functionality is not in the scope of this patch. Thus, attempt to init DMA for SPI2 will always fail for now. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>