summaryrefslogtreecommitdiff
path: root/arch/x86/kvm/svm/svm.h
AgeCommit message (Collapse)Author
2023-09-23KVM: SVM: Fix TSC_AUX virtualization setupTom Lendacky
The checks for virtualizing TSC_AUX occur during the vCPU reset processing path. However, at the time of initial vCPU reset processing, when the vCPU is first created, not all of the guest CPUID information has been set. In this case the RDTSCP and RDPID feature support for the guest is not in place and so TSC_AUX virtualization is not established. This continues for each vCPU created for the guest. On the first boot of an AP, vCPU reset processing is executed as a result of an APIC INIT event, this time with all of the guest CPUID information set, resulting in TSC_AUX virtualization being enabled, but only for the APs. The BSP always sees a TSC_AUX value of 0 which probably went unnoticed because, at least for Linux, the BSP TSC_AUX value is 0. Move the TSC_AUX virtualization enablement out of the init_vmcb() path and into the vcpu_after_set_cpuid() path to allow for proper initialization of the support after the guest CPUID information has been set. With the TSC_AUX virtualization support now in the vcpu_set_after_cpuid() path, the intercepts must be either cleared or set based on the guest CPUID input. Fixes: 296d5a17e793 ("KVM: SEV-ES: Use V_TSC_AUX if available instead of RDTSC/MSR_TSC_AUX intercepts") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Message-Id: <4137fbcb9008951ab5f0befa74a0399d2cce809a.1694811272.git.thomas.lendacky@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-08-31Merge tag 'kvm-x86-misc-6.6' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini
KVM x86 changes for 6.6: - Misc cleanups - Retry APIC optimized recalculation if a vCPU is added/enabled - Overhaul emergency reboot code to bring SVM up to par with VMX, tie the "emergency disabling" behavior to KVM actually being loaded, and move all of the logic within KVM - Fix user triggerable WARNs in SVM where KVM incorrectly assumes the TSC ratio MSR can diverge from the default iff TSC scaling is enabled, and clean up related code - Add a framework to allow "caching" feature flags so that KVM can check if the guest can use a feature without needing to search guest CPUID
2023-08-31Merge tag 'kvm-x86-svm-6.6' of https://github.com/kvm-x86/linux into HEADPaolo Bonzini
KVM: x86: SVM changes for 6.6: - Add support for SEV-ES DebugSwap, i.e. allow SEV-ES guests to use debug registers and generate/handle #DBs - Clean up LBR virtualization code - Fix a bug where KVM fails to set the target pCPU during an IRTE update - Fix fatal bugs in SEV-ES intrahost migration - Fix a bug where the recent (architecturally correct) change to reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to skip it)
2023-08-25KVM: SVM: Require nrips support for SEV guests (and beyond)Sean Christopherson
Disallow SEV (and beyond) if nrips is disabled via module param, as KVM can't read guest memory to partially emulate and skip an instruction. All CPUs that support SEV support NRIPS, i.e. this is purely stopping the user from shooting themselves in the foot. Cc: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20230825013621.2845700-3-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-08-17KVM: nSVM: Use KVM-governed feature framework to track "vNMI enabled"Sean Christopherson
Track "virtual NMI exposed to L1" via a governed feature flag instead of using a dedicated bit/flag in vcpu_svm. Note, checking KVM's capabilities instead of the "vnmi" param means that the code isn't strictly equivalent, as vnmi_enabled could have been set if nested=false where as that the governed feature cannot. But that's a glorified nop as the feature/flag is consumed only by paths that are gated by nSVM being enabled. Link: https://lore.kernel.org/r/20230815203653.519297-15-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-08-17KVM: nSVM: Use KVM-governed feature framework to track "vGIF enabled"Sean Christopherson
Track "virtual GIF exposed to L1" via a governed feature flag instead of using a dedicated bit/flag in vcpu_svm. Note, checking KVM's capabilities instead of the "vgif" param means that the code isn't strictly equivalent, as vgif_enabled could have been set if nested=false where as that the governed feature cannot. But that's a glorified nop as the feature/flag is consumed only by paths that are Link: https://lore.kernel.org/r/20230815203653.519297-14-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-08-17KVM: nSVM: Use KVM-governed feature framework to track "Pause Filter enabled"Sean Christopherson
Track "Pause Filtering is exposed to L1" via governed feature flags instead of using dedicated bits/flags in vcpu_svm. No functional change intended. Reviewed-by: Yuan Yao <yuan.yao@intel.com> Link: https://lore.kernel.org/r/20230815203653.519297-13-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-08-17KVM: nSVM: Use KVM-governed feature framework to track "LBRv enabled"Sean Christopherson
Track "LBR virtualization exposed to L1" via a governed feature flag instead of using a dedicated bit/flag in vcpu_svm. Note, checking KVM's capabilities instead of the "lbrv" param means that the code isn't strictly equivalent, as lbrv_enabled could have been set if nested=false where as that the governed feature cannot. But that's a glorified nop as the feature/flag is consumed only by paths that are gated by nSVM being enabled. Link: https://lore.kernel.org/r/20230815203653.519297-12-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-08-17KVM: nSVM: Use KVM-governed feature framework to track "vVM{SAVE,LOAD} enabled"Sean Christopherson
Track "virtual VMSAVE/VMLOAD exposed to L1" via a governed feature flag instead of using a dedicated bit/flag in vcpu_svm. Opportunistically add a comment explaining why KVM disallows virtual VMLOAD/VMSAVE when the vCPU model is Intel. No functional change intended. Link: https://lore.kernel.org/r/20230815203653.519297-11-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-08-17KVM: nSVM: Use KVM-governed feature framework to track "TSC scaling enabled"Sean Christopherson
Track "TSC scaling exposed to L1" via a governed feature flag instead of using a dedicated bit/flag in vcpu_svm. Note, this fixes a benign bug where KVM would mark TSC scaling as exposed to L1 even if overall nested SVM supported is disabled, i.e. KVM would let L1 write MSR_AMD64_TSC_RATIO even when KVM didn't advertise TSCRATEMSR support to userspace. Reviewed-by: Yuan Yao <yuan.yao@intel.com> Link: https://lore.kernel.org/r/20230815203653.519297-10-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-08-17KVM: nSVM: Use KVM-governed feature framework to track "NRIPS enabled"Sean Christopherson
Track "NRIPS exposed to L1" via a governed feature flag instead of using a dedicated bit/flag in vcpu_svm. No functional change intended. Reviewed-by: Yuan Yao <yuan.yao@intel.com> Link: https://lore.kernel.org/r/20230815203653.519297-9-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-08-04KVM: SEV: snapshot the GHCB before accessing itPaolo Bonzini
Validation of the GHCB is susceptible to time-of-check/time-of-use vulnerabilities. To avoid them, we would like to always snapshot the fields that are read in sev_es_validate_vmgexit(), and not use the GHCB anymore after it returns. This means: - invoking sev_es_sync_from_ghcb() before any GHCB access, including before sev_es_validate_vmgexit() - snapshotting all fields including the valid bitmap and the sw_scratch field, which are currently not caching anywhere. The valid bitmap is the first thing to be copied out of the GHCB; then, further accesses will use the copy in svm->sev_es. Fixes: 291bd20d5d88 ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT") Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-08-03KVM: x86: Always write vCPU's current TSC offset/ratio in vendor hooksSean Christopherson
Drop the @offset and @multiplier params from the kvm_x86_ops hooks for propagating TSC offsets/multipliers into hardware, and instead have the vendor implementations pull the information directly from the vCPU structure. The respective vCPU fields _must_ be written at the same time in order to maintain consistent state, i.e. it's not random luck that the value passed in by all callers is grabbed from the vCPU. Explicitly grabbing the value from the vCPU field in SVM's implementation in particular will allow for additional cleanup without introducing even more subtle dependencies. Specifically, SVM can skip the WRMSR if guest state isn't loaded, i.e. svm_prepare_switch_to_guest() will load the correct value for the vCPU prior to entering the guest. This also reconciles KVM's handling of related values that are stored in the vCPU, as svm_write_tsc_offset() already assumes/requires the caller to have updated l1_tsc_offset. Link: https://lore.kernel.org/r/20230729011608.1065019-6-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-08-03KVM: nSVM: Use the "outer" helper for writing multiplier to MSR_AMD64_TSC_RATIOSean Christopherson
When emulating nested SVM transitions, use the outer helper for writing the TSC multiplier for L2. Using the inner helper only for one-off cases, i.e. for paths where KVM is NOT emulating or modifying vCPU state, will allow for multiple cleanups: - Explicitly disabling preemption only in the outer helper - Getting the multiplier from the vCPU field in the outer helper - Skipping the WRMSR in the outer helper if guest state isn't loaded Opportunistically delete an extra newline. No functional change intended. Link: https://lore.kernel.org/r/20230729011608.1065019-4-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-07-28KVM: SEV: move set_dr_intercepts/clr_dr_intercepts from the headerAlexey Kardashevskiy
Static functions set_dr_intercepts() and clr_dr_intercepts() are only called from SVM so move them to .c. No functional change intended. Signed-off-by: Alexey Kardashevskiy <aik@amd.com> Reviewed-by: Carlos Bilbao <carlos.bilbao@amd.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Santosh Shukla <santosh.shukla@amd.com> Link: https://lore.kernel.org/r/20230615063757.3039121-2-aik@amd.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-06-01KVM: SVM: Remove TSS reloading code after VMEXITMingwei Zhang
Remove the dedicated post-VMEXIT TSS reloading code now that KVM uses VMLOAD to load host segment state, which includes TSS state. Fixes: e79b91bb3c91 ("KVM: SVM: use vmsave/vmload for saving/restoring additional host state") Reported-by: Venkatesh Srinivas <venkateshs@google.com> Suggested-by: Jim Mattson <jmattson@google.com> Signed-off-by: Mingwei Zhang <mizhang@google.com> Link: https://lore.kernel.org/r/20230523165635.4002711-1-mizhang@google.com [sean: massage changelog] Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-03-22KVM: nSVM: Implement support for nested VNMISantosh Shukla
Allow L1 to use vNMI to accelerate its injection of NMI to L2 by propagating vNMI int_ctl bits from/to vmcb12 to/from vmcb02. To handle both the case where vNMI is enabled for L1 and L2, and where vNMI is enabled for L1 but _not_ L2, move pending L1 vNMIs to nmi_pending on nested VM-Entry and raise KVM_REQ_EVENT, i.e. rely on existing code to route the NMI to the correct domain. On nested VM-Exit, reverse the process and set/clear V_NMI_PENDING for L1 based one whether nmi_pending is zero or non-zero. There is no need to consider vmcb02 in this case, as V_NMI_PENDING can be set in vmcb02 if vNMI is disabled for L2, and if vNMI is enabled for L2, then L1 and L2 have different NMI contexts. Co-developed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Santosh Shukla <santosh.shukla@amd.com> Link: https://lore.kernel.org/r/20230227084016.3368-12-santosh.shukla@amd.com [sean: massage changelog to match the code] Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-03-22KVM: x86: Add support for SVM's Virtual NMISantosh Shukla
Add support for SVM's Virtual NMIs implementation, which adds proper tracking of virtual NMI blocking, and an intr_ctrl flag that software can set to mark a virtual NMI as pending. Pending virtual NMIs are serviced by hardware if/when virtual NMIs become unblocked, i.e. act more or less like real NMIs. Introduce two new kvm_x86_ops callbacks so to support SVM's vNMI, as KVM needs to treat a pending vNMI as partially injected. Specifically, if two NMIs (for L1) arrive concurrently in KVM's software model, KVM's ABI is to inject one and pend the other. Without vNMI, KVM manually tracks the pending NMI and uses NMI windows to detect when the NMI should be injected. With vNMI, the pending NMI is simply stuffed into the VMCB and handed off to hardware. This means that KVM needs to be able to set a vNMI pending on-demand, and also query if a vNMI is pending, e.g. to honor the "at most one NMI pending" rule and to preserve all NMIs across save and restore. Warn if KVM attempts to open an NMI window when vNMI is fully enabled, as the above logic should prevent KVM from ever getting to kvm_check_and_inject_events() with two NMIs pending _in software_, and the "at most one NMI pending" logic should prevent having an NMI pending in hardware and an NMI pending in software if NMIs are also blocked, i.e. if KVM can't immediately inject the second NMI. Signed-off-by: Santosh Shukla <Santosh.Shukla@amd.com> Co-developed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Link: https://lore.kernel.org/r/20230227084016.3368-11-santosh.shukla@amd.com [sean: rewrite shortlog and changelog, massage code comments] Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-01-31KVM: x86: Move HF_NMI_MASK and HF_IRET_MASK into "struct vcpu_svm"Maxim Levitsky
Move HF_NMI_MASK and HF_IRET_MASK (a.k.a. "waiting for IRET") out of the common "hflags" and into dedicated flags in "struct vcpu_svm". The flags are used only for the SVM and thus should not be in hflags. Tracking NMI masking in software isn't SVM specific, e.g. VMX has a similar flag (soft_vnmi_blocked), but that's much more of a hack as VMX can't intercept IRET, is useful only for ancient CPUs, i.e. will hopefully be removed at some point, and again the exact behavior is vendor specific and shouldn't ever be referenced in common code. converting VMX No functional change is intended. Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Tested-by: Santosh Shukla <Santosh.Shukla@amd.com> Link: https://lore.kernel.org/r/20221129193717.513824-5-mlevitsk@redhat.com [sean: split from HF_GIF_MASK patch] Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-01-31KVM: x86: Move HF_GIF_MASK into "struct vcpu_svm" as "guest_gif"Maxim Levitsky
Move HF_GIF_MASK out of the common "hflags" and into vcpu_svm.guest_gif. GIF is an SVM-only concept and has should never be consulted outside of SVM-specific code. No functional change is intended. Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Tested-by: Santosh Shukla <Santosh.Shukla@amd.com> Link: https://lore.kernel.org/r/20221129193717.513824-5-mlevitsk@redhat.com [sean: split to separate patch] Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-01-24KVM: svm/avic: Drop "struct kvm_x86_ops" for avic_hardware_setup()Like Xu
Even in commit 4bdec12aa8d6 ("KVM: SVM: Detect X2APIC virtualization (x2AVIC) support"), where avic_hardware_setup() was first introduced, its only pass-in parameter "struct kvm_x86_ops *ops" is not used at all. Clean it up a bit to avoid compiler ranting from LLVM toolchain. Signed-off-by: Like Xu <likexu@tencent.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/r/20221109115952.92816-1-likexu@tencent.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-01-13KVM: x86: Track required APICv inhibits with variable, not callbackSean Christopherson
Track the per-vendor required APICv inhibits with a variable instead of calling into vendor code every time KVM wants to query the set of required inhibits. The required inhibits are a property of the vendor's virtualization architecture, i.e. are 100% static. Using a variable allows the compiler to inline the check, e.g. generate a single-uop TEST+Jcc, and thus eliminates any desire to avoid checking inhibits for performance reasons. No functional change intended. Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20230106011306.85230-32-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-01-13KVM: SVM: Replace "avic_mode" enum with "x2avic_enabled" booleanSean Christopherson
Replace the "avic_mode" enum with a single bool to track whether or not x2AVIC is enabled. KVM already has "apicv_enabled" that tracks if any flavor of AVIC is enabled, i.e. AVIC_MODE_NONE and AVIC_MODE_X1 are redundant and unnecessary noise. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20230106011306.85230-12-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-01-13KVM: SVM: Don't put/load AVIC when setting virtual APIC modeSean Christopherson
Move the VMCB updates from avic_refresh_apicv_exec_ctrl() into avic_set_virtual_apic_mode() and invert the dependency being said functions to avoid calling avic_vcpu_{load,put}() and avic_set_pi_irte_mode() when "only" setting the virtual APIC mode. avic_set_virtual_apic_mode() is invoked from common x86 with preemption enabled, which makes avic_vcpu_{load,put}() unhappy. Luckily, calling those and updating IRTE stuff is unnecessary as the only reason avic_set_virtual_apic_mode() is called is to handle transitions between xAPIC and x2APIC that don't also toggle APICv activation. And if activation doesn't change, there's no need to fiddle with the physical APIC ID table or update IRTE. The "full" refresh is guaranteed to be called if activation changes in this case as the only call to the "set" path is: kvm_vcpu_update_apicv(vcpu); static_call_cond(kvm_x86_set_virtual_apic_mode)(vcpu); and kvm_vcpu_update_apicv() invokes the refresh if activation changes: if (apic->apicv_active == activate) goto out; apic->apicv_active = activate; kvm_apic_update_apicv(vcpu); static_call(kvm_x86_refresh_apicv_exec_ctrl)(vcpu); Rename the helper to reflect that it is also called during "refresh". WARNING: CPU: 183 PID: 49186 at arch/x86/kvm/svm/avic.c:1081 avic_vcpu_put+0xde/0xf0 [kvm_amd] CPU: 183 PID: 49186 Comm: stable Tainted: G O 6.0.0-smp--fcddbca45f0a-sink #34 Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 10.48.0 01/27/2022 RIP: 0010:avic_vcpu_put+0xde/0xf0 [kvm_amd] avic_refresh_apicv_exec_ctrl+0x142/0x1c0 [kvm_amd] avic_set_virtual_apic_mode+0x5a/0x70 [kvm_amd] kvm_lapic_set_base+0x149/0x1a0 [kvm] kvm_set_apic_base+0x8f/0xd0 [kvm] kvm_set_msr_common+0xa3a/0xdc0 [kvm] svm_set_msr+0x364/0x6b0 [kvm_amd] __kvm_set_msr+0xb8/0x1c0 [kvm] kvm_emulate_wrmsr+0x58/0x1d0 [kvm] msr_interception+0x1c/0x30 [kvm_amd] svm_invoke_exit_handler+0x31/0x100 [kvm_amd] svm_handle_exit+0xfc/0x160 [kvm_amd] vcpu_enter_guest+0x21bb/0x23e0 [kvm] vcpu_run+0x92/0x450 [kvm] kvm_arch_vcpu_ioctl_run+0x43e/0x6e0 [kvm] kvm_vcpu_ioctl+0x559/0x620 [kvm] Fixes: 05c4fe8c1bd9 ("KVM: SVM: Refresh AVIC configuration when changing APIC mode") Cc: stable@vger.kernel.org Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20230106011306.85230-8-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18x86/hyperv: KVM: Rename "hv_enlightenments" to "hv_vmcb_enlightenments"Sean Christopherson
Now that KVM isn't littered with "struct hv_enlightenments" casts, rename the struct to "hv_vmcb_enlightenments" to highlight the fact that the struct is specifically for SVM's VMCB. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-5-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-18KVM: SVM: Add a proper field for Hyper-V VMCB enlightenmentsSean Christopherson
Add a union to provide hv_enlightenments side-by-side with the sw_reserved bytes that Hyper-V's enlightenments overlay. Casting sw_reserved everywhere is messy, confusing, and unnecessarily unsafe. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20221101145426.251680-4-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-09KVM: SVM: move MSR_IA32_SPEC_CTRL save/restore to assemblyPaolo Bonzini
Restoration of the host IA32_SPEC_CTRL value is probably too late with respect to the return thunk training sequence. With respect to the user/kernel boundary, AMD says, "If software chooses to toggle STIBP (e.g., set STIBP on kernel entry, and clear it on kernel exit), software should set STIBP to 1 before executing the return thunk training sequence." I assume the same requirements apply to the guest/host boundary. The return thunk training sequence is in vmenter.S, quite close to the VM-exit. On hosts without V_SPEC_CTRL, however, the host's IA32_SPEC_CTRL value is not restored until much later. To avoid this, move the restoration of host SPEC_CTRL to assembly and, for consistency, move the restoration of the guest SPEC_CTRL as well. This is not particularly difficult, apart from some care to cover both 32- and 64-bit, and to share code between SEV-ES and normal vmentry. Cc: stable@vger.kernel.org Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk") Suggested-by: Jim Mattson <jmattson@google.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-09KVM: SVM: restore host save area from assemblyPaolo Bonzini
Allow access to the percpu area via the GS segment base, which is needed in order to access the saved host spec_ctrl value. In linux-next FILL_RETURN_BUFFER also needs to access percpu data. For simplicity, the physical address of the save area is added to struct svm_cpu_data. Cc: stable@vger.kernel.org Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk") Reported-by: Nathan Chancellor <nathan@kernel.org> Analyzed-by: Andrew Cooper <andrew.cooper3@citrix.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-09KVM: SVM: do not allocate struct svm_cpu_data dynamicallyPaolo Bonzini
The svm_data percpu variable is a pointer, but it is allocated via svm_hardware_setup() when KVM is loaded. Unlike hardware_enable() this means that it is never NULL for the whole lifetime of KVM, and static allocation does not waste any memory compared to the status quo. It is also more efficient and more easily handled from assembly code, so do it and don't look back. Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-09KVM: SVM: remove dead field from struct svm_cpu_dataPaolo Bonzini
The "cpu" field of struct svm_cpu_data has been write-only since commit 4b656b120249 ("KVM: SVM: force new asid on vcpu migration", 2009-08-05). Remove it. Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-09KVM: SVM: remove unused field from struct vcpu_svmPaolo Bonzini
The pointer to svm_cpu_data in struct vcpu_svm looks interesting from the point of view of accessing it after vmexit, when the GSBASE is still containing the guest value. However, despite existing since the very first commit of drivers/kvm/svm.c (commit 6aa8b732ca01, "[PATCH] kvm: userspace interface", 2006-12-10), it was never set to anything. Ignore the opportunity to fix a 16 year old "bug" and delete it; doing things the "harder" way makes it possible to remove more old cruft. Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-09KVM: SVM: retrieve VMCB from assemblyPaolo Bonzini
Continue moving accesses to struct vcpu_svm to vmenter.S. Reducing the number of arguments limits the chance of mistakes due to different registers used for argument passing in 32- and 64-bit ABIs; pushing the VMCB argument and almost immediately popping it into a different register looks pretty weird. 32-bit ABI is not a concern for __svm_sev_es_vcpu_run() which is 64-bit only; however, it will soon need @svm to save/restore SPEC_CTRL so stay consistent with __svm_vcpu_run() and let them share the same prototype. No functional change intended. Cc: stable@vger.kernel.org Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk") Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-09KVM: SVM: replace regs argument of __svm_vcpu_run() with vcpu_svmPaolo Bonzini
Since registers are reachable through vcpu_svm, and we will need to access more fields of that struct, pass it instead of the regs[] array. No functional change intended. Cc: stable@vger.kernel.org Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk") Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-01Merge remote-tracking branch 'kvm/next' into kvm-next-5.20Paolo Bonzini
KVM/s390, KVM/x86 and common infrastructure changes for 5.20 x86: * Permit guests to ignore single-bit ECC errors * Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache * Intel IPI virtualization * Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS * PEBS virtualization * Simplify PMU emulation by just using PERF_TYPE_RAW events * More accurate event reinjection on SVM (avoid retrying instructions) * Allow getting/setting the state of the speaker port data bit * Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent * "Notify" VM exit (detect microarchitectural hangs) for Intel * Cleanups for MCE MSR emulation s390: * add an interface to provide a hypervisor dump for secure guests * improve selftests to use TAP interface * enable interpretive execution of zPCI instructions (for PCI passthrough) * First part of deferred teardown * CPU Topology * PV attestation * Minor fixes Generic: * new selftests API using struct kvm_vcpu instead of a (vm, id) tuple x86: * Use try_cmpxchg64 instead of cmpxchg64 * Bugfixes * Ignore benign host accesses to PMU MSRs when PMU is disabled * Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior * x86/MMU: Allow NX huge pages to be disabled on a per-vm basis * Port eager page splitting to shadow MMU as well * Enable CMCI capability by default and handle injected UCNA errors * Expose pid of vcpu threads in debugfs * x2AVIC support for AMD * cleanup PIO emulation * Fixes for LLDT/LTR emulation * Don't require refcounted "struct page" to create huge SPTEs x86 cleanups: * Use separate namespaces for guest PTEs and shadow PTEs bitmasks * PIO emulation * Reorganize rmap API, mostly around rmap destruction * Do not workaround very old KVM bugs for L0 that runs with nesting enabled * new selftests API for CPUID
2022-06-24KVM: x86: nSVM: optimize svm_set_x2apic_msr_interceptionMaxim Levitsky
- Avoid toggling the x2apic msr interception if it is already up to date. - Avoid touching L0 msr bitmap when AVIC is inhibited on entry to the guest mode, because in this case the guest usually uses its own msr bitmap. Later on VM exit, the 1st optimization will allow KVM to skip touching the L0 msr bitmap as well. Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20220519102709.24125-18-suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-06-24KVM: SVM: Introduce logic to (de)activate x2AVIC modeSuravee Suthikulpanit
Introduce logic to (de)activate AVIC, which also allows switching between AVIC to x2AVIC mode at runtime. When an AVIC-enabled guest switches from APIC to x2APIC mode, the SVM driver needs to perform the following steps: 1. Set the x2APIC mode bit for AVIC in VMCB along with the maximum APIC ID support for each mode accodingly. 2. Disable x2APIC MSRs interception in order to allow the hardware to virtualize x2APIC MSRs accesses. Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Message-Id: <20220519102709.24125-12-suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-06-24KVM: x86: nSVM: always intercept x2apic msrsMaxim Levitsky
As a preparation for x2avic, this patch ensures that x2apic msrs are always intercepted for the nested guest. Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20220519102709.24125-11-suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-06-24KVM: SVM: Refresh AVIC configuration when changing APIC modeSuravee Suthikulpanit
AMD AVIC can support xAPIC and x2APIC virtualization, which requires changing x2APIC bit VMCB and MSR intercepton for x2APIC MSRs. Therefore, call avic_refresh_apicv_exec_ctrl() to refresh configuration accordingly. Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Message-Id: <20220519102709.24125-10-suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-06-24KVM: SVM: Adding support for configuring x2APIC MSRs interceptionSuravee Suthikulpanit
When enabling x2APIC virtualization (x2AVIC), the interception of x2APIC MSRs must be disabled to let the hardware virtualize guest MSR accesses. Current implementation keeps track of list of MSR interception state in the svm_direct_access_msrs array. Therefore, extends the array to include x2APIC MSRs. Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Message-Id: <20220519102709.24125-8-suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-06-24KVM: SVM: Detect X2APIC virtualization (x2AVIC) supportSuravee Suthikulpanit
Add CPUID check for the x2APIC virtualization (x2AVIC) feature. If available, the SVM driver can support both AVIC and x2AVIC modes when load the kvm_amd driver with avic=1. The operating mode will be determined at runtime depending on the guest APIC mode. Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Message-Id: <20220519102709.24125-4-suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-06-24KVM: SEV: Init target VMCBs in sev_migrate_fromPeter Gonda
The target VMCBs during an intra-host migration need to correctly setup for running SEV and SEV-ES guests. Add sev_init_vmcb() function and make sev_es_init_vmcb() static. sev_init_vmcb() uses the now private function to init SEV-ES guests VMCBs when needed. Fixes: 0b020f5af092 ("KVM: SEV: Add support for SEV-ES intra host migration") Fixes: b56639318bb2 ("KVM: SEV: Add support for SEV intra host migration") Signed-off-by: Peter Gonda <pgonda@google.com> Cc: Marc Orr <marcorr@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Message-Id: <20220623173406.744645-1-pgonda@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-06-20KVM: SVM: Drop unused AVIC / kvm_x86_ops declarationsSean Christopherson
Drop a handful of unused AVIC function declarations whose implementations were removed during the conversion to optional static calls. No functional change intended. Fixes: abb6d479e226 ("KVM: x86: make several APIC virtualization callbacks optional") Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220614230548.3852141-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-06-09Merge branch 'kvm-5.20-early'Paolo Bonzini
s390: * add an interface to provide a hypervisor dump for secure guests * improve selftests to show tests x86: * Intel IPI virtualization * Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS * PEBS virtualization * Simplify PMU emulation by just using PERF_TYPE_RAW events * More accurate event reinjection on SVM (avoid retrying instructions) * Allow getting/setting the state of the speaker port data bit * Rewrite gfn-pfn cache refresh * Refuse starting the module if VM-Entry/VM-Exit controls are inconsistent * "Notify" VM exit
2022-06-09KVM: x86: SVM: drop preempt-safe wrappers for avic_vcpu_load/putMaxim Levitsky
Now that these functions are always called with preemption disabled, remove the preempt_disable()/preempt_enable() pair inside them. No functional change intended. Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20220606180829.102503-8-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-06-09Merge tag 'kvm-riscv-fixes-5.19-1' of https://github.com/kvm-riscv/linux ↵Paolo Bonzini
into HEAD KVM/riscv fixes for 5.19, take #1 - Typo fix in arch/riscv/kvm/vmid.c - Remove broken reference pattern from MAINTAINERS entry
2022-06-08KVM: nSVM: Transparently handle L1 -> L2 NMI re-injectionMaciej S. Szmigiero
A NMI that L1 wants to inject into its L2 should be directly re-injected, without causing L0 side effects like engaging NMI blocking for L1. It's also worth noting that in this case it is L1 responsibility to track the NMI window status for its L2 guest. Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <f894d13501cd48157b3069a4b4c7369575ddb60e.1651440202.git.maciej.szmigiero@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-06-08KVM: SVM: Re-inject INT3/INTO instead of retrying the instructionSean Christopherson
Re-inject INT3/INTO instead of retrying the instruction if the CPU encountered an intercepted exception while vectoring the software exception, e.g. if vectoring INT3 encounters a #PF and KVM is using shadow paging. Retrying the instruction is architecturally wrong, e.g. will result in a spurious #DB if there's a code breakpoint on the INT3/O, and lack of re-injection also breaks nested virtualization, e.g. if L1 injects a software exception and vectoring the injected exception encounters an exception that is intercepted by L0 but not L1. Due to, ahem, deficiencies in the SVM architecture, acquiring the next RIP may require flowing through the emulator even if NRIPS is supported, as the CPU clears next_rip if the VM-Exit is due to an exception other than "exceptions caused by the INT3, INTO, and BOUND instructions". To deal with this, "skip" the instruction to calculate next_rip (if it's not already known), and then unwind the RIP write and any side effects (RFLAGS updates). Save the computed next_rip and use it to re-stuff next_rip if injection doesn't complete. This allows KVM to do the right thing if next_rip was known prior to injection, e.g. if L1 injects a soft event into L2, and there is no backing INTn instruction, e.g. if L1 is injecting an arbitrary event. Note, it's impossible to guarantee architectural correctness given SVM's architectural flaws. E.g. if the guest executes INTn (no KVM injection), an exit occurs while vectoring the INTn, and the guest modifies the code stream while the exit is being handled, KVM will compute the incorrect next_rip due to "skipping" the wrong instruction. A future enhancement to make this less awful would be for KVM to detect that the decoded instruction is not the correct INTn and drop the to-be-injected soft event (retrying is a lesser evil compared to shoving the wrong RIP on the exception stack). Reported-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <65cb88deab40bc1649d509194864312a89bbe02e.1651440202.git.maciej.szmigiero@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-06-08KVM: nSVM: Sync next_rip field from vmcb12 to vmcb02Maciej S. Szmigiero
The next_rip field of a VMCB is *not* an output-only field for a VMRUN. This field value (instead of the saved guest RIP) in used by the CPU for the return address pushed on stack when injecting a software interrupt or INT3 or INTO exception. Make sure this field gets synced from vmcb12 to vmcb02 when entering L2 or loading a nested state and NRIPS is exposed to L1. If NRIPS is supported in hardware but not exposed to L1 (nrips=0 or hidden by userspace), stuff vmcb02's next_rip from the new L2 RIP to emulate a !NRIPS CPU (which saves RIP on the stack as-is). Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Co-developed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <c2e0a3d78db3ae30530f11d4e9254b452a89f42b.1651440202.git.maciej.szmigiero@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-06-07Merge branch 'kvm-5.19-early-fixes' into HEADPaolo Bonzini
2022-06-07KVM: SVM: fix tsc scaling cache logicMaxim Levitsky
SVM uses a per-cpu variable to cache the current value of the tsc scaling multiplier msr on each cpu. Commit 1ab9287add5e2 ("KVM: X86: Add vendor callbacks for writing the TSC multiplier") broke this caching logic. Refactor the code so that all TSC scaling multiplier writes go through a single function which checks and updates the cache. This fixes the following scenario: 1. A CPU runs a guest with some tsc scaling ratio. 2. New guest with different tsc scaling ratio starts on this CPU and terminates almost immediately. This ensures that the short running guest had set the tsc scaling ratio just once when it was set via KVM_SET_TSC_KHZ. Due to the bug, the per-cpu cache is not updated. 3. The original guest continues to run, it doesn't restore the msr value back to its own value, because the cache matches, and thus continues to run with a wrong tsc scaling ratio. Fixes: 1ab9287add5e2 ("KVM: X86: Add vendor callbacks for writing the TSC multiplier") Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20220606181149.103072-1-mlevitsk@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>