summaryrefslogtreecommitdiff
path: root/arch/x86/kernel
AgeCommit message (Collapse)Author
2019-05-18treewide: prefix header search paths with $(srctree)/Masahiro Yamada
Currently, the Kbuild core manipulates header search paths in a crazy way [1]. To fix this mess, I want all Makefiles to add explicit $(srctree)/ to the search paths in the srctree. Some Makefiles are already written in that way, but not all. The goal of this work is to make the notation consistent, and finally get rid of the gross hacks. Having whitespaces after -I does not matter since commit 48f6e3cf5bc6 ("kbuild: do not drop -I without parameter"). [1]: https://patchwork.kernel.org/patch/9632347/ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-17Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "ARM: - support for SVE and Pointer Authentication in guests - PMU improvements POWER: - support for direct access to the POWER9 XIVE interrupt controller - memory and performance optimizations x86: - support for accessing memory not backed by struct page - fixes and refactoring Generic: - dirty page tracking improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (155 commits) kvm: fix compilation on aarch64 Revert "KVM: nVMX: Expose RDPMC-exiting only when guest supports PMU" kvm: x86: Fix L1TF mitigation for shadow MMU KVM: nVMX: Disable intercept for FS/GS base MSRs in vmcs02 when possible KVM: PPC: Book3S: Remove useless checks in 'release' method of KVM device KVM: PPC: Book3S HV: XIVE: Fix spelling mistake "acessing" -> "accessing" KVM: PPC: Book3S HV: Make sure to load LPID for radix VCPUs kvm: nVMX: Set nested_run_pending in vmx_set_nested_state after checks complete tests: kvm: Add tests for KVM_SET_NESTED_STATE KVM: nVMX: KVM_SET_NESTED_STATE - Tear down old EVMCS state before setting new state tests: kvm: Add tests for KVM_CAP_MAX_VCPUS and KVM_CAP_MAX_CPU_ID tests: kvm: Add tests to .gitignore KVM: Introduce KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 KVM: Fix kvm_clear_dirty_log_protect off-by-(minus-)one KVM: Fix the bitmap range to copy during clear dirty KVM: arm64: Fix ptrauth ID register masking logic KVM: x86: use direct accessors for RIP and RSP KVM: VMX: Use accessors for GPRs outside of dedicated caching logic KVM: x86: Omit caching logic for always-available GPRs kvm, x86: Properly check whether a pfn is an MMIO or not ...
2019-05-16Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes and updates: - a handful of MDS documentation/comment updates - a cleanup related to hweight interfaces - a SEV guest fix for large pages - a kprobes LTO fix - and a final cleanup commit for vDSO HPET support removal" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/speculation/mds: Improve CPU buffer clear documentation x86/speculation/mds: Revert CPU buffer clear on double fault exit x86/kconfig: Disable CONFIG_GENERIC_HWEIGHT and remove __HAVE_ARCH_SW_HWEIGHT x86/mm: Do not use set_{pud, pmd}_safe() when splitting a large page x86/kprobes: Make trampoline_handler() global and visible x86/vdso: Remove hpet_page from vDSO
2019-05-16x86/speculation/mds: Revert CPU buffer clear on double fault exitAndy Lutomirski
The double fault ESPFIX path doesn't return to user mode at all -- it returns back to the kernel by simulating a #GP fault. prepare_exit_to_usermode() will run on the way out of general_protection before running user code. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jon Masters <jcm@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: 04dcbdb80578 ("x86/speculation/mds: Clear CPU buffers on exit to user") Link: http://lkml.kernel.org/r/ac97612445c0a44ee10374f6ea79c222fe22a5c4.1557865329.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-16Merge branch 'linus' into x86/urgent, to pick up dependent changesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-15Merge tag 'trace-v5.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "The major changes in this tracing update includes: - Removal of non-DYNAMIC_FTRACE from 32bit x86 - Removal of mcount support from x86 - Emulating a call from int3 on x86_64, fixes live kernel patching - Consolidated Tracing Error logs file Minor updates: - Removal of klp_check_compiler_support() - kdb ftrace dumping output changes - Accessing and creating ftrace instances from inside the kernel - Clean up of #define if macro - Introduction of TRACE_EVENT_NOP() to disable trace events based on config options And other minor fixes and clean ups" * tag 'trace-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits) x86: Hide the int3_emulate_call/jmp functions from UML livepatch: Remove klp_check_compiler_support() ftrace/x86: Remove mcount support ftrace/x86_32: Remove support for non DYNAMIC_FTRACE tracing: Simplify "if" macro code tracing: Fix documentation about disabling options using trace_options tracing: Replace kzalloc with kcalloc tracing: Fix partial reading of trace event's id file tracing: Allow RCU to run between postponed startup tests tracing: Fix white space issues in parse_pred() function tracing: Eliminate const char[] auto variables ring-buffer: Fix mispelling of Calculate tracing: probeevent: Fix to make the type of $comm string tracing: probeevent: Do not accumulate on ret variable tracing: uprobes: Re-enable $comm support for uprobe events ftrace/x86_64: Emulate call function while updating in breakpoint handler x86_64: Allow breakpoints to emulate call instructions x86_64: Add gap to int3 to allow for call emulation tracing: kdb: Allow ftdump to skip all but the last few entries tracing: Add trace_total_entries() / trace_total_entries_cpu() ...
2019-05-15Merge tag 'pm-5.2-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These fix a recent regression causing kernels built with CONFIG_PM unset to crash on systems that support the Performance and Energy Bias Hint (EPB), clean up the cpufreq core and some users of transition notifiers and introduce a new power domain flag into the generic power domains framework (genpd). Specifics: - Fix recent regression causing kernels built with CONFIG_PM unset to crash on systems that support the Performance and Energy Bias Hint (EPB) by avoiding to compile the EPB-related code depending on CONFIG_PM when it is unset (Rafael Wysocki). - Clean up the transition notifier invocation code in the cpufreq core and change some users of cpufreq transition notifiers accordingly (Viresh Kumar). - Change MAINTAINERS to cover the schedutil governor as part of cpufreq (Viresh Kumar). - Simplify cpufreq_init_policy() to avoid redundant computations (Yue Hu). - Add explanatory comment to the cpufreq core (Rafael Wysocki). - Introduce a new flag, GENPD_FLAG_RPM_ALWAYS_ON, to the generic power domains (genpd) framework along with the first user of it (Leonard Crestez)" * tag 'pm-5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: soc: imx: gpc: Use GENPD_FLAG_RPM_ALWAYS_ON for ERR009619 PM / Domains: Add GENPD_FLAG_RPM_ALWAYS_ON flag cpufreq: Update MAINTAINERS to include schedutil governor cpufreq: Don't find governor for setpolicy drivers in cpufreq_init_policy() cpufreq: Explain the kobject_put() in cpufreq_policy_alloc() cpufreq: Call transition notifier only once for each policy x86: intel_epb: Take CONFIG_PM into account
2019-05-15Merge branches 'pm-cpufreq' and 'pm-domains'Rafael J. Wysocki
* pm-cpufreq: cpufreq: Update MAINTAINERS to include schedutil governor cpufreq: Don't find governor for setpolicy drivers in cpufreq_init_policy() cpufreq: Explain the kobject_put() in cpufreq_policy_alloc() cpufreq: Call transition notifier only once for each policy * pm-domains: soc: imx: gpc: Use GENPD_FLAG_RPM_ALWAYS_ON for ERR009619 PM / Domains: Add GENPD_FLAG_RPM_ALWAYS_ON flag
2019-05-14Merge branch 'x86-mds-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 MDS mitigations from Thomas Gleixner: "Microarchitectural Data Sampling (MDS) is a hardware vulnerability which allows unprivileged speculative access to data which is available in various CPU internal buffers. This new set of misfeatures has the following CVEs assigned: CVE-2018-12126 MSBDS Microarchitectural Store Buffer Data Sampling CVE-2018-12130 MFBDS Microarchitectural Fill Buffer Data Sampling CVE-2018-12127 MLPDS Microarchitectural Load Port Data Sampling CVE-2019-11091 MDSUM Microarchitectural Data Sampling Uncacheable Memory MDS attacks target microarchitectural buffers which speculatively forward data under certain conditions. Disclosure gadgets can expose this data via cache side channels. Contrary to other speculation based vulnerabilities the MDS vulnerability does not allow the attacker to control the memory target address. As a consequence the attacks are purely sampling based, but as demonstrated with the TLBleed attack samples can be postprocessed successfully. The mitigation is to flush the microarchitectural buffers on return to user space and before entering a VM. It's bolted on the VERW instruction and requires a microcode update. As some of the attacks exploit data structures shared between hyperthreads, full protection requires to disable hyperthreading. The kernel does not do that by default to avoid breaking unattended updates. The mitigation set comes with documentation for administrators and a deeper technical view" * 'x86-mds-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) x86/speculation/mds: Fix documentation typo Documentation: Correct the possible MDS sysfs values x86/mds: Add MDSUM variant to the MDS documentation x86/speculation/mds: Add 'mitigations=' support for MDS x86/speculation/mds: Print SMT vulnerable on MSBDS with mitigations off x86/speculation/mds: Fix comment x86/speculation/mds: Add SMT warning message x86/speculation: Move arch_smt_update() call to after mitigation decisions x86/speculation/mds: Add mds=full,nosmt cmdline option Documentation: Add MDS vulnerability documentation Documentation: Move L1TF to separate directory x86/speculation/mds: Add mitigation mode VMWERV x86/speculation/mds: Add sysfs reporting for MDS x86/speculation/mds: Add mitigation control for MDS x86/speculation/mds: Conditionally clear CPU buffers on idle entry x86/kvm/vmx: Add MDS protection when L1D Flush is not active x86/speculation/mds: Clear CPU buffers on exit to user x86/speculation/mds: Add mds_clear_cpu_buffers() x86/kvm: Expose X86_FEATURE_MD_CLEAR to guests x86/speculation/mds: Add BUG_MSBDS_ONLY ...
2019-05-10ftrace/x86: Remove mcount supportSteven Rostedt (VMware)
There's two methods of enabling function tracing in Linux on x86. One is with just "gcc -pg" and the other is "gcc -pg -mfentry". The former will use calls to a special function "mcount" after the frame is set up in all C functions. The latter will add calls to a special function called "fentry" as the very first instruction of all C functions. At compile time, there is a check to see if gcc supports, -mfentry, and if it does, it will use that, because it is more versatile and less error prone for function tracing. Starting with v4.19, the minimum gcc supported to build the Linux kernel, was raised to version 4.6. That also happens to be the first gcc version to support -mfentry. Since on x86, using gcc versions from 4.6 and beyond will unconditionally enable the -mfentry, it will no longer use mcount as the method for inserting calls into the C functions of the kernel. This means that there is no point in continuing to maintain mcount in x86. Remove support for using mcount. This makes the code less complex, and will also allow it to be simplified in the future. Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-05-10ftrace/x86_32: Remove support for non DYNAMIC_FTRACESteven Rostedt (VMware)
When DYNAMIC_FTRACE is enabled in the kernel, all the functions that can be traced by the function tracer have a "nop" placeholder at the start of the function. When function tracing is enabled, the nop is converted into a call to the tracing infrastructure where the functions get traced. This also allows for specifying specific functions to trace, and a lot of infrastructure is built on top of this. When DYNAMIC_FTRACE is not enabled, all the functions have a call to the ftrace trampoline. A check is made to see if a function pointer is the ftrace_stub or not, and if it is not, it calls the function pointer to trace the code. This adds over 10% overhead to the kernel even when tracing is disabled. When an architecture supports DYNAMIC_FTRACE there really is no reason to use the static tracing. I have kept non DYNAMIC_FTRACE available in x86 so that the generic code for non DYNAMIC_FTRACE can be tested. There is no reason to support non DYNAMIC_FTRACE for both x86_64 and x86_32. As the non DYNAMIC_FTRACE for x86_32 does not even support fentry, and we want to remove mcount completely, there's no reason to keep non DYNAMIC_FTRACE around for x86_32. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-05-10cpufreq: Call transition notifier only once for each policyViresh Kumar
Currently, the notifiers are called once for each CPU of the policy->cpus cpumask. It would be more optimal if the notifier can be called only once and all the relevant information be provided to it. Out of the 23 drivers that register for the transition notifiers today, only 4 of them do per-cpu updates and the callback for the rest can be called only once for the policy without any impact. This would also avoid multiple function calls to the notifier callbacks and reduce multiple iterations of notifier core's code (which does locking as well). This patch adds pointer to the cpufreq policy to the struct cpufreq_freqs, so the notifier callback has all the information available to it with a single call. The five drivers which perform per-cpu updates are updated to use the cpufreq policy. The freqs->cpu field is redundant now and is removed. Acked-by: David S. Miller <davem@davemloft.net> (sparc) Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-05-10x86: intel_epb: Take CONFIG_PM into accountRafael J. Wysocki
Commit b9c273babce7 ("PM / arch: x86: MSR_IA32_ENERGY_PERF_BIAS sysfs interface") caused kernels built with CONFIG_PM unset to crash on systems supporting the Performance and Energy Bias Hint (EPB), because it attempts to add files to sysfs directories that don't exist on those systems. Prevent that from happening by taking CONFIG_PM into account so that the code depending on it is not compiled at all when it is not set. Fixes: b9c273babce7 ("PM / arch: x86: MSR_IA32_ENERGY_PERF_BIAS sysfs interface") Reported-by: Ido Schimmel <idosch@mellanox.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org>
2019-05-09Merge branch 'next-integrity' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull intgrity updates from James Morris: "This contains just three patches, the remainder were either included in other pull requests (eg. audit, lockdown) or will be upstreamed via other subsystems (eg. kselftests, Power). Included here is one bug fix, one documentation update, and extending the x86 IMA arch policy rules to coordinate the different kernel module signature verification methods" * 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: doc/kernel-parameters.txt: Deprecate ima_appraise_tcb x86/ima: add missing include x86/ima: require signed kernel modules
2019-05-09Merge tag 'dma-mapping-5.2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull DMA mapping updates from Christoph Hellwig: - remove the already broken support for NULL dev arguments to the DMA API calls - Kconfig tidyups * tag 'dma-mapping-5.2' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: add a Kconfig symbol to indicate arch_dma_prep_coherent presence dma-mapping: remove an unnecessary NULL check x86/dma: Remove the x86_dma_fallback_dev hack dma-mapping: remove leftover NULL device support arm: use a dummy struct device for ISA DMA use of the DMA API pxa3xx-gcu: pass struct device to dma_mmap_coherent gbefb: switch to managed version of the DMA allocator da8xx-fb: pass struct device to DMA API functions parport_ip32: pass struct device to DMA API functions dma: select GENERIC_ALLOCATOR for DMA_REMAP
2019-05-08Merge tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "This has two exciting community drivers for ARM Mali accelerators. Since ARM has never been open source friendly on the GPU side of the house, the community has had to create open source drivers for the Mali GPUs. Lima covers the older t4xx and panfrost the newer 6xx/7xx series. Well done to all involved and hopefully this will help ARM head in the right direction. There is also now the ability if you don't have any of the legacy drivers enabled (pre-KMS) to remove all the pre-KMS support code from the core drm, this saves 10% or so in codesize on my machine. i915 also enable Icelake/Elkhart Lake Gen11 GPUs by default, vboxvideo moves out of staging. There are also some rcar-du patches which crossover with media tree but all should be acked by Mauro. Summary: uapi changes: - Colorspace connector property - fourcc - new YUV formts - timeline sync objects initially merged - expose FB_DAMAGE_CLIPS to atomic userspace new drivers: - vboxvideo: moved out of staging - aspeed: ASPEED SoC BMC chip display support - lima: ARM Mali4xx GPU acceleration driver support - panfrost: ARM Mali6xx/7xx Midgard/Bitfrost acceleration driver support core: - component helper docs - unplugging fixes - devm device init - MIPI/DSI rate control - shmem backed gem objects - connector, display_info, edid_quirks cleanups - dma_buf fence chain support - 64-bit dma-fence seqno comparison fixes - move initial fb config code to core - gem fence array helpers for Lima - ability to remove legacy support code if no drivers requires it (removes 10% of drm.ko size) - lease fixes ttm: - unified DRM_FILE_PAGE_OFFSET handling - Account for kernel allocations in kernel zone only panel: - OSD070T1718-19TS panel support - panel-tpo-td028ttec1 backlight support - Ronbo RB070D30 MIPI/DSI - Feiyang FY07024DI26A30-D MIPI-DSI panel - Rocktech jh057n00900 MIPI-DSI panel i915: - Comet Lake (Gen9) PCI IDs - Updated Icelake PCI IDs - Elkhartlake (Gen11) support - DP MST property addtions - plane and watermark fixes - Icelake port sync and VEBOX disable fixes - struct_mutex usage reduction - Icelake gamma fix - GuC reset fixes - make mmap more asynchronous - sound display power well race fixes - DDI/MIPI-DSI clocks for Icelake - Icelake RPS frequency changing support - Icelake workarounds amdgpu: - Use HMM for userptr - vega20 experimental smu11 support - RAS support for vega20 - BACO support for vega12 + fixes for vega20 - reworked IH interrupt handling - amdkfd RAS support - Freesync improvements - initial timeline sync object support - DC Z ordering fixes - NV12 planes support - colorspace properties for planes= - eDP opts if eDP already initialized nouveau: - misc fixes etnaviv: - misc fixes msm: - GPU zap shader support expansion - robustness ABI addition exynos: - Logging cleanups tegra: - Shared reset fix - CPU cache maintenance fix cirrus: - driver rewritten using simple helpers meson: - G12A support vmwgfx: - Resource dirtying management improvements - Userspace logging improvements virtio: - PRIME fixes rockchip: - rk3066 hdmi support sun4i: - DSI burst mode support vc4: - load tracker to detect underflow v3d: - v3d v4.2 support malidp: - initial Mali D71 support in komeda driver tfp410: - omap related improvement omapdrm: - drm bridge/panel support - drop some omap specific panels rcar-du: - Display writeback support" * tag 'drm-next-2019-05-09' of git://anongit.freedesktop.org/drm/drm: (1507 commits) drm/msm/a6xx: No zap shader is not an error drm/cma-helper: Fix drm_gem_cma_free_object() drm: Fix timestamp docs for variable refresh properties. drm/komeda: Mark the local functions as static drm/komeda: Fixed warning: Function parameter or member not described drm/komeda: Expose bus_width to Komeda-CORE drm/komeda: Add sysfs attribute: core_id and config_id drm: add non-desktop quirk for Valve HMDs drm/panfrost: Show stored feature registers drm/panfrost: Don't scream about deferred probe drm/panfrost: Disable PM on probe failure drm/panfrost: Set DMA masks earlier drm/panfrost: Add sanity checks to submit IOCTL drm/etnaviv: initialize idle mask before querying the HW db drm: introduce a capability flag for syncobj timeline support drm: report consistent errors when checking syncobj capibility drm/nouveau/nouveau: forward error generated while resuming objects tree drm/nouveau/fb/ramgk104: fix spelling mistake "sucessfully" -> "successfully" drm/nouveau/i2c: Disable i2c bus access after ->fini() drm/nouveau: Remove duplicate ACPI_VIDEO_NOTIFY_PROBE definition ...
2019-05-08ftrace/x86_64: Emulate call function while updating in breakpoint handlerPeter Zijlstra
Nicolai Stange discovered[1] that if live kernel patching is enabled, and the function tracer started tracing the same function that was patched, the conversion of the fentry call site during the translation of going from calling the live kernel patch trampoline to the iterator trampoline, would have as slight window where it didn't call anything. As live kernel patching depends on ftrace to always call its code (to prevent the function being traced from being called, as it will redirect it). This small window would allow the old buggy function to be called, and this can cause undesirable results. Nicolai submitted new patches[2] but these were controversial. As this is similar to the static call emulation issues that came up a while ago[3]. But after some debate[4][5] adding a gap in the stack when entering the breakpoint handler allows for pushing the return address onto the stack to easily emulate a call. [1] http://lkml.kernel.org/r/20180726104029.7736-1-nstange@suse.de [2] http://lkml.kernel.org/r/20190427100639.15074-1-nstange@suse.de [3] http://lkml.kernel.org/r/3cf04e113d71c9f8e4be95fb84a510f085aa4afa.1541711457.git.jpoimboe@redhat.com [4] http://lkml.kernel.org/r/CAHk-=wh5OpheSU8Em_Q3Hg8qw_JtoijxOdPtHru6d+5K8TWM=A@mail.gmail.com [5] http://lkml.kernel.org/r/CAHk-=wjvQxY4DvPrJ6haPgAa6b906h=MwZXO6G8OtiTGe=N7_w@mail.gmail.com [ Live kernel patching is not implemented on x86_32, thus the emulate calls are only for x86_64. ] Cc: Andy Lutomirski <luto@kernel.org> Cc: Nicolai Stange <nstange@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: the arch/x86 maintainers <x86@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Petr Mladek <pmladek@suse.com> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Juergen Gross <jgross@suse.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Nayna Jain <nayna@linux.ibm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: "open list:KERNEL SELFTEST FRAMEWORK" <linux-kselftest@vger.kernel.org> Cc: stable@vger.kernel.org Fixes: b700e7f03df5 ("livepatch: kernel: add support for live patching") Tested-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> [ Changed to only implement emulated calls for x86_64 ] Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-05-08x86/kprobes: Make trampoline_handler() global and visibleAndi Kleen
This function is referenced from assembler, so in LTO it needs to be global and visible to not be optimized away. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lkml.kernel.org/r/20190330004743.29541-7-andi@firstfloor.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-07Merge tag 'driver-core-5.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core/kobject updates from Greg KH: "Here is the "big" set of driver core patches for 5.2-rc1 There are a number of ACPI patches in here as well, as Rafael said they should go through this tree due to the driver core changes they required. They have all been acked by the ACPI developers. There are also a number of small subsystem-specific changes in here, due to some changes to the kobject core code. Those too have all been acked by the various subsystem maintainers. As for content, it's pretty boring outside of the ACPI changes: - spdx cleanups - kobject documentation updates - default attribute groups for kobjects - other minor kobject/driver core fixes All have been in linux-next for a while with no reported issues" * tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (47 commits) kobject: clean up the kobject add documentation a bit more kobject: Fix kernel-doc comment first line kobject: Remove docstring reference to kset firmware_loader: Fix a typo ("syfs" -> "sysfs") kobject: fix dereference before null check on kobj Revert "driver core: platform: Fix the usage of platform device name(pdev->name)" init/config: Do not select BUILD_BIN2C for IKCONFIG Provide in-kernel headers to make extending kernel easier kobject: Improve doc clarity kobject_init_and_add() kobject: Improve docs for kobject_add/del driver core: platform: Fix the usage of platform device name(pdev->name) livepatch: Replace klp_ktype_patch's default_attrs with groups cpufreq: schedutil: Replace default_attrs field with groups padata: Replace padata_attr_type default_attrs field with groups irqdesc: Replace irq_kobj_type's default_attrs field with groups net-sysfs: Replace ktype default_attrs field with groups block: Replace all ktype default_attrs with groups samples/kobject: Replace foo_ktype's default_attrs field with groups kobject: Add support for default attribute groups to kobj_type driver core: Postpone DMA tear-down until after devres release for probe failure ...
2019-05-07Merge tag 'stream_open-5.2' of https://lab.nexedi.com/kirr/linuxLinus Torvalds
Pull stream_open conversion from Kirill Smelkov: - remove unnecessary double nonseekable_open from drivers/char/dtlk.c as noticed by Pavel Machek while reviewing nonseekable_open -> stream_open mass conversion. - the mass conversion patch promised in commit 10dce8af3422 ("fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock") and is automatically generated by running $ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci I've verified each generated change manually - that it is correct to convert - and each other nonseekable_open instance left - that it is either not correct to convert there, or that it is not converted due to current stream_open.cocci limitations. More details on this in the patch. - finally, change VFS to pass ppos=NULL into .read/.write for files that declare themselves streams. It was suggested by Rasmus Villemoes and makes sure that if ppos starts to be erroneously used in a stream file, such bug won't go unnoticed and will produce an oops instead of creating illusion of position change being taken into account. Note: this patch does not conflict with "fuse: Add FOPEN_STREAM to use stream_open()" that will be hopefully coming via FUSE tree, because fs/fuse/ uses new-style .read_iter/.write_iter, and for these accessors position is still passed as non-pointer kiocb.ki_pos . * tag 'stream_open-5.2' of https://lab.nexedi.com/kirr/linux: vfs: pass ppos=NULL to .read()/.write() of FMODE_STREAM files *: convert stream-like files from nonseekable_open -> stream_open dtlk: remove double call to nonseekable_open
2019-05-07Merge branch 'x86-fpu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 FPU state handling updates from Borislav Petkov: "This contains work started by Rik van Riel and brought to fruition by Sebastian Andrzej Siewior with the main goal to optimize when to load FPU registers: only when returning to userspace and not on every context switch (while the task remains in the kernel). In addition, this optimization makes kernel_fpu_begin() cheaper by requiring registers saving only on the first invocation and skipping that in following ones. What is more, this series cleans up and streamlines many aspects of the already complex FPU code, hopefully making it more palatable for future improvements and simplifications. Finally, there's a __user annotations fix from Jann Horn" * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits) x86/fpu: Fault-in user stack if copy_fpstate_to_sigframe() fails x86/pkeys: Add PKRU value to init_fpstate x86/fpu: Restore regs in copy_fpstate_to_sigframe() in order to use the fastpath x86/fpu: Add a fastpath to copy_fpstate_to_sigframe() x86/fpu: Add a fastpath to __fpu__restore_sig() x86/fpu: Defer FPU state load until return to userspace x86/fpu: Merge the two code paths in __fpu__restore_sig() x86/fpu: Restore from kernel memory on the 64-bit path too x86/fpu: Inline copy_user_to_fpregs_zeroing() x86/fpu: Update xstate's PKRU value on write_pkru() x86/fpu: Prepare copy_fpstate_to_sigframe() for TIF_NEED_FPU_LOAD x86/fpu: Always store the registers in copy_fpstate_to_sigframe() x86/entry: Add TIF_NEED_FPU_LOAD x86/fpu: Eager switch PKRU state x86/pkeys: Don't check if PKRU is zero before writing it x86/fpu: Only write PKRU if it is different from current x86/pkeys: Provide *pkru() helpers x86/fpu: Use a feature number instead of mask in two more helpers x86/fpu: Make __raw_xsave_addr() use a feature number instead of mask x86/fpu: Add an __fpregs_load_activate() internal helper ...
2019-05-06Merge branch 'ras-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS updates from Borislav Petkov: - Support for varying MCA bank numbers per CPU: this is in preparation for future CPU enablement (Yazen Ghannam) - MCA banks read race fix (Tony Luck) - Facility to filter MCEs which should not be logged (Yazen Ghannam) - The usual round of cleanups and fixes * 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/MCE/AMD: Don't report L1 BTB MCA errors on some family 17h models x86/MCE: Add an MCE-record filtering function RAS/CEC: Increment cec_entered under the mutex lock x86/mce: Fix debugfs_simple_attr.cocci warnings x86/mce: Remove mce_report_event() x86/mce: Handle varying MCA bank counts x86/mce: Fix machine_check_poll() tests for error types MAINTAINERS: Fix file pattern for X86 MCE INFRASTRUCTURE x86/MCE: Group AMD function prototypes in <asm/mce.h>
2019-05-06Merge tag 'pm-5.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These fix the (Intel-specific) Performance and Energy Bias Hint (EPB) handling and expose it to user space via sysfs, fix and clean up several cpufreq drivers, add support for two new chips to the qoriq cpufreq driver, fix, simplify and clean up the cpufreq core and the schedutil governor, add support for "CPU" domains to the generic power domains (genpd) framework and provide low-level PSCI firmware support for that feature, fix the exynos cpuidle driver and fix a couple of issues in the devfreq subsystem and clean it up. Specifics: - Fix the handling of Performance and Energy Bias Hint (EPB) on Intel processors and expose it to user space via sysfs to avoid having to access it through the generic MSR I/F (Rafael Wysocki). - Improve the handling of global turbo changes made by the platform firmware in the intel_pstate driver (Rafael Wysocki). - Convert some slow-path static_cpu_has() callers to boot_cpu_has() in cpufreq (Borislav Petkov). - Fix the frequency calculation loop in the armada-37xx cpufreq driver (Gregory CLEMENT). - Fix possible object reference leaks in multuple cpufreq drivers (Wen Yang). - Fix kerneldoc comment in the centrino cpufreq driver (dongjian). - Clean up the ACPI and maple cpufreq drivers (Viresh Kumar, Mohan Kumar). - Add support for lx2160a and ls1028a to the qoriq cpufreq driver (Vabhav Sharma, Yuantian Tang). - Fix kobject memory leak in the cpufreq core (Viresh Kumar). - Simplify the IOwait boosting in the schedutil cpufreq governor and rework the TSC cpufreq notifier on x86 (Rafael Wysocki). - Clean up the cpufreq core and statistics code (Yue Hu, Kyle Lin). - Improve the cpufreq documentation, add SPDX license tags to some PM documentation files and unify copyright notices in them (Rafael Wysocki). - Add support for "CPU" domains to the generic power domains (genpd) framework and provide low-level PSCI firmware support for that feature (Ulf Hansson). - Rearrange the PSCI firmware support code and add support for SYSTEM_RESET2 to it (Ulf Hansson, Sudeep Holla). - Improve genpd support for devices in multiple power domains (Ulf Hansson). - Unify target residency for the AFTR and coupled AFTR states in the exynos cpuidle driver (Marek Szyprowski). - Introduce new helper routine in the operating performance points (OPP) framework (Andrew-sh.Cheng). - Add support for passing on-die termination (ODT) and auto power down parameters from the kernel to Trusted Firmware-A (TF-A) to the rk3399_dmc devfreq driver (Enric Balletbo i Serra). - Add tracing to devfreq (Lukasz Luba). - Make the exynos-bus devfreq driver suspend all devices on system shutdown (Marek Szyprowski). - Fix a few minor issues in the devfreq subsystem and clean it up somewhat (Enric Balletbo i Serra, MyungJoo Ham, Rob Herring, Saravana Kannan, Yangtao Li). - Improve system wakeup diagnostics (Stephen Boyd). - Rework filesystem sync messages emitted during system suspend and hibernation (Harry Pan)" * tag 'pm-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits) cpufreq: Fix kobject memleak cpufreq: armada-37xx: fix frequency calculation for opp cpufreq: centrino: Fix centrino_setpolicy() kerneldoc comment cpufreq: qoriq: add support for lx2160a x86: tsc: Rework time_cpufreq_notifier() PM / Domains: Allow to attach a CPU via genpd_dev_pm_attach_by_id|name() PM / Domains: Search for the CPU device outside the genpd lock PM / Domains: Drop unused in-parameter to some genpd functions PM / Domains: Use the base device for driver_deferred_probe_check_state() cpufreq: qoriq: Add ls1028a chip support PM / Domains: Enable genpd_dev_pm_attach_by_id|name() for single PM domain PM / Domains: Allow OF lookup for multi PM domain case from ->attach_dev() PM / Domains: Don't kfree() the virtual device in the error path cpufreq: Move ->get callback check outside of __cpufreq_get() PM / Domains: remove unnecessary unlikely() cpufreq: Remove needless bios_limit check in show_bios_limit() drivers/cpufreq/acpi-cpufreq.c: This fixes the following checkpatch warning firmware/psci: add support for SYSTEM_RESET2 PM / devfreq: add tracing for scheduling work trace: events: add devfreq trace event file ...
2019-05-06Merge branch 'x86-microcode-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 microcode loading update from Borislav Petkov: "A nice Intel microcode blob loading cleanup which gets rid of the ugly memcpy wrappers and switches the driver to use the iov_iter API. By Jann Horn. In addition, the /dev/cpu/microcode interface is finally deprecated as it is inadequate for the same reasons the late microcode loading is" * 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode: Deprecate MICROCODE_OLD_INTERFACE x86/microcode: Fix the ancient deprecated microcode loading method x86/microcode/intel: Refactor Intel microcode blob loading
2019-05-06Merge branch 'x86-topology-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 topology updates from Ingo Molnar: "Two main changes: preparatory changes for Intel multi-die topology support, plus a syslog message tweak" * 'x86-topology-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/topology: Make DEBUG_HOTPLUG_CPU0 pr_info() more descriptive x86/smpboot: Rename match_die() to match_pkg() topology: Simplify cputopology.txt formatting and wording x86/topology: Fix documentation typo
2019-05-06Merge branch 'x86-timers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 timer updates from Ingo Molnar: "Two changes: an LTO improvement, plus the new 'nowatchdog' boot option to disable the clocksource watchdog" * 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/timer: Don't inline __const_udelay() x86/tsc: Add option to disable tsc clocksource watchdog
2019-05-06Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform updates from Ingo Molnar: "Smaller update for Hyper-V to support EOI assist, plus LTO fixes" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kvm: Make steal_time visible x86/hyperv: Make hv_vcpu_is_preempted() visible x86/hyper-v: Implement EOI assist
2019-05-06Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mm updates from Ingo Molnar: "The changes in here are: - text_poke() fixes and an extensive set of executability lockdowns, to (hopefully) eliminate the last residual circumstances under which we are using W|X mappings even temporarily on x86 kernels. This required a broad range of surgery in text patching facilities, module loading, trampoline handling and other bits. - tweak page fault messages to be more informative and more structured. - remove DISCONTIGMEM support on x86-32 and make SPARSEMEM the default. - reduce KASLR granularity on 5-level paging kernels from 512 GB to 1 GB. - misc other changes and updates" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) x86/mm: Initialize PGD cache during mm initialization x86/alternatives: Add comment about module removal races x86/kprobes: Use vmalloc special flag x86/ftrace: Use vmalloc special flag bpf: Use vmalloc special flag modules: Use vmalloc special flag mm/vmalloc: Add flag for freeing of special permsissions mm/hibernation: Make hibernation handle unmapped pages x86/mm/cpa: Add set_direct_map_*() functions x86/alternatives: Remove the return value of text_poke_*() x86/jump-label: Remove support for custom text poker x86/modules: Avoid breaking W^X while loading modules x86/kprobes: Set instruction page as executable x86/ftrace: Set trampoline pages as executable x86/kgdb: Avoid redundant comparison of patched code x86/alternatives: Use temporary mm for text poking x86/alternatives: Initialize temporary mm for patching fork: Provide a function for copying init_mm uprobes: Initialize uprobes earlier x86/mm: Save debug registers when loading a temporary mm ...
2019-05-06Merge branch 'x86-kdump-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 kdump update from Ingo Molnar: "This includes two changes: - Raise the crash kernel reservation limit from from ~896MB to ~4GB. Only very old (and already known-broken) kexec-tools is supposed to be affected by this negatively. - Allow higher than 4GB crash kernel allocations when low allocations fail" * 'x86-kdump-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kdump: Fall back to reserve high crashkernel memory x86/kdump: Have crashkernel=X reserve under 4G by default
2019-05-06Merge branch 'x86-irq-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 irq updates from Ingo Molnar: "Here are the main changes in this tree: - Introduce x86-64 IRQ/exception/debug stack guard pages to detect stack overflows immediately and deterministically. - Clean up over a decade worth of cruft accumulated. The outcome of this should be more clear-cut faults/crashes when any of the low level x86 CPU stacks overflow, instead of silent memory corruption and sporadic failures much later on" * 'x86-irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) x86/irq: Fix outdated comments x86/irq/64: Remove stack overflow debug code x86/irq/64: Remap the IRQ stack with guard pages x86/irq/64: Split the IRQ stack into its own pages x86/irq/64: Init hardirq_stack_ptr during CPU hotplug x86/irq/32: Handle irq stack allocation failure proper x86/irq/32: Invoke irq_ctx_init() from init_IRQ() x86/irq/64: Rename irq_stack_ptr to hardirq_stack_ptr x86/irq/32: Rename hard/softirq_stack to hard/softirq_stack_ptr x86/irq/32: Make irq stack a character array x86/irq/32: Define IRQ_STACK_SIZE x86/dumpstack/64: Speedup in_exception_stack() x86/exceptions: Split debug IST stack x86/exceptions: Enable IST guard pages x86/exceptions: Disconnect IST index and stack order x86/cpu: Remove orig_ist array x86/cpu: Prepare TSS.IST setup for guard pages x86/dumpstack/64: Use cpu_entry_area instead of orig_ist x86/irq/64: Use cpu entry area instead of orig_ist x86/traps: Use cpu_entry_area instead of orig_ist ...
2019-05-06Merge branch 'x86-cpu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu updates from Ingo Molnar: "Two changes: a Hygon CPU fix, and an optimization Centaur CPUs" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/power: Optimize C3 entry on Centaur CPUs x86/CPU/hygon: Fix phys_proc_id calculation logic for multi-die processors
2019-05-06Merge branch 'x86-cleanups-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Ingo Molnar: "A handful of cleanups: dma-ops cleanups, missing boot time kcalloc() check, a Sparse fix and use struct_size() to simplify a vzalloc() call" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/pci: Clean up usage of X86_DEV_DMA_OPS x86/Kconfig: Remove the unused X86_DMA_REMAP KConfig symbol x86/kexec/crash: Use struct_size() in vzalloc() x86/mm/tlb: Define LOADED_MM_SWITCHING with pointer-sized number x86/platform/uv: Fix missing checks of kcalloc() return values
2019-05-06Merge branch 'x86-cache-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cache QoS updates from Ingo Molnar: "An RDT cleanup and a fix for RDT initialization of new resource groups" * 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/resctrl: Initialize a new resource group with default MBA values x86/resctrl: Move per RDT domain initialization to a separate function
2019-05-06Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm updates from Ingo Molnar: "This includes the following changes: - cpu_has() cleanups - sync_bitops.h modernization to the rmwcc.h facility, similarly to bitops.h - continued LTO annotations/fixes - misc cleanups and smaller cleanups" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/um/vdso: Drop unnecessary cc-ldoption x86/vdso: Rename variable to fix -Wshadow warning x86/cpu/amd: Exclude 32bit only assembler from 64bit build x86/asm: Mark all top level asm statements as .text x86/build/vdso: Add FORCE to the build rule of %.so x86/asm: Modernize sync_bitops.h x86/mm: Convert some slow-path static_cpu_has() callers to boot_cpu_has() x86: Convert some slow-path static_cpu_has() callers to boot_cpu_has() x86/asm: Clarify static_cpu_has()'s intended use x86/uaccess: Fix implicit cast of __user pointer x86/cpufeature: Remove __pure attribute to _static_cpu_has()
2019-05-06Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 apic update from Ingo Molnar: "A single commit which unifies the unnecessarily diverged implementations of APIC timer initialization. As a result the max_delta parameter is now consistently taken into account" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Unify duplicated local apic timer clockevent initialization
2019-05-06Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "The main kernel changes were: - add support for Intel's "adaptive PEBS v4" - which embedds LBS data in PEBS records and can thus batch up and reduce the IRQ (NMI) rate significantly - reducing overhead and making call-graph profiling less intrusive. - add Intel CPU core and uncore support updates for Tremont, Icelake, - extend the x86 PMU constraints scheduler with 'constraint ranges' to better support Icelake hw constraints, - make x86 call-chain support work better with CONFIG_FRAME_POINTER=y - misc other changes Tooling changes: - updates to the main tools: 'perf record', 'perf trace', 'perf stat' - updated Intel and S/390 vendor events - libtraceevent updates - misc other updates and fixes" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (69 commits) perf/x86: Make perf callchains work without CONFIG_FRAME_POINTER watchdog: Fix typo in comment perf/x86/intel: Add Tremont core PMU support perf/x86/intel/uncore: Add Intel Icelake uncore support perf/x86/msr: Add Icelake support perf/x86/intel/rapl: Add Icelake support perf/x86/intel/cstate: Add Icelake support perf/x86/intel: Add Icelake support perf/x86: Support constraint ranges perf/x86/lbr: Avoid reading the LBRs when adaptive PEBS handles them perf/x86/intel: Support adaptive PEBS v4 perf/x86/intel/ds: Extract code of event update in short period perf/x86/intel: Extract memory code PEBS parser for reuse perf/x86: Support outputting XMM registers perf/x86/intel: Force resched when TFA sysctl is modified perf/core: Add perf_pmu_resched() as global function perf/headers: Fix stale comment for struct perf_addr_filter perf/core: Make perf_swevent_init_cpu() static perf/x86: Add sanity checks to x86_schedule_events() perf/x86: Optimize x86_schedule_events() ...
2019-05-06Merge branch 'efi-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI updates from Ingo Molnar: "The changes in this cycle were: - Squash a spurious warning when using the EFI framebuffer on a non-EFI boot - Use DMI data to annotate RAS memory errors on ARM just like we do on Intel - Followup cleanups for DMI - libstub Makefile cleanups" * 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/libstub/arm: Omit unneeded stripping of ksymtab/kcrctab sections efi: Unify DMI setup code over the arm/arm64, ia64 and x86 architectures efi/arm: Show SMBIOS bank/device location in CPER and GHES error logs efifb: Omit memory map check on legacy boot efi/libstub: Refactor the cmd_stubcopy Makefile command
2019-05-06Merge branch 'core-stacktrace-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull stack trace updates from Ingo Molnar: "So Thomas looked at the stacktrace code recently and noticed a few weirdnesses, and we all know how such stories of crummy kernel code meeting German engineering perfection end: a 45-patch series to clean it all up! :-) Here's the changes in Thomas's words: 'Struct stack_trace is a sinkhole for input and output parameters which is largely pointless for most usage sites. In fact if embedded into other data structures it creates indirections and extra storage overhead for no benefit. Looking at all usage sites makes it clear that they just require an interface which is based on a storage array. That array is either on stack, global or embedded into some other data structure. Some of the stack depot usage sites are outright wrong, but fortunately the wrongness just causes more stack being used for nothing and does not have functional impact. Another oddity is the inconsistent termination of the stack trace with ULONG_MAX. It's pointless as the number of entries is what determines the length of the stored trace. In fact quite some call sites remove the ULONG_MAX marker afterwards with or without nasty comments about it. Not all architectures do that and those which do, do it inconsistenly either conditional on nr_entries == 0 or unconditionally. The following series cleans that up by: 1) Removing the ULONG_MAX termination in the architecture code 2) Removing the ULONG_MAX fixups at the call sites 3) Providing plain storage array based interfaces for stacktrace and stackdepot. 4) Cleaning up the mess at the callsites including some related cleanups. 5) Removing the struct stack_trace based interfaces This is not changing the struct stack_trace interfaces at the architecture level, but it removes the exposure to the generic code'" * 'core-stacktrace-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits) x86/stacktrace: Use common infrastructure stacktrace: Provide common infrastructure lib/stackdepot: Remove obsolete functions stacktrace: Remove obsolete functions livepatch: Simplify stack trace retrieval tracing: Remove the last struct stack_trace usage tracing: Simplify stack trace retrieval tracing: Make ftrace_trace_userstack() static and conditional tracing: Use percpu stack trace buffer more intelligently tracing: Simplify stacktrace retrieval in histograms lockdep: Simplify stack trace handling lockdep: Remove save argument from check_prev_add() lockdep: Remove unused trace argument from print_circular_bug() drm: Simplify stacktrace handling dm persistent data: Simplify stack trace handling dm bufio: Simplify stack trace retrieval btrfs: ref-verify: Simplify stack trace retrieval dma/debug: Simplify stracktrace retrieval fault-inject: Simplify stacktrace retrieval mm/page_owner: Simplify stack trace handling ...
2019-05-06Merge branch 'core-speculation-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull speculation mitigation update from Ingo Molnar: "This adds the "mitigations=" bootline option, which offers a cross-arch set of options that will work on x86, PowerPC and s390 that will map to the arch specific option internally" * 'core-speculation-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: s390/speculation: Support 'mitigations=' cmdline option powerpc/speculation: Support 'mitigations=' cmdline option x86/speculation: Support 'mitigations=' cmdline option cpu/speculation: Add 'mitigations=' cmdline option
2019-05-06Merge branch 'core-rseq-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull rseq updates from Ingo Molnar: "A cleanup and a fix to comments" * 'core-rseq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rseq: Remove superfluous rseq_len from task_struct rseq: Clean up comments by reflecting removal of event counter
2019-05-06Merge branch 'core-objtool-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool updates from Ingo Molnar: "This is a series from Peter Zijlstra that adds x86 build-time uaccess validation of SMAP to objtool, which will detect and warn about the following uaccess API usage bugs and weirdnesses: - call to %s() with UACCESS enabled - return with UACCESS enabled - return with UACCESS disabled from a UACCESS-safe function - recursive UACCESS enable - redundant UACCESS disable - UACCESS-safe disables UACCESS As it turns out not leaking uaccess permissions outside the intended uaccess functionality is hard when the interfaces are complex and when such bugs are mostly dormant. As a bonus we now also check the DF flag. We had at least one high-profile bug in that area in the early days of Linux, and the checking is fairly simple. The checks performed and warnings emitted are: - call to %s() with DF set - return with DF set - return with modified stack frame - recursive STD - redundant CLD It's all x86-only for now, but later on this can also be used for PAN on ARM and objtool is fairly cross-platform in principle. While all warnings emitted by this new checking facility that got reported to us were fixed, there might be GCC version dependent warnings that were not reported yet - which we'll address, should they trigger. The warnings are non-fatal build warnings" * 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) mm/uaccess: Use 'unsigned long' to placate UBSAN warnings on older GCC versions x86/uaccess: Dont leak the AC flag into __put_user() argument evaluation sched/x86_64: Don't save flags on context switch objtool: Add Direction Flag validation objtool: Add UACCESS validation objtool: Fix sibling call detection objtool: Rewrite alt->skip_orig objtool: Add --backtrace support objtool: Rewrite add_ignores() objtool: Handle function aliases objtool: Set insn->func for alternatives x86/uaccess, kcov: Disable stack protector x86/uaccess, ftrace: Fix ftrace_likely_update() vs. SMAP x86/uaccess, ubsan: Fix UBSAN vs. SMAP x86/uaccess, kasan: Fix KASAN vs SMAP x86/smap: Ditch __stringify() x86/uaccess: Introduce user_access_{save,restore}() x86/uaccess, signal: Fix AC=1 bloat x86/uaccess: Always inline user_access_begin() x86/uaccess, xen: Suppress SMAP warnings ...
2019-05-06*: convert stream-like files from nonseekable_open -> stream_openKirill Smelkov
Using scripts/coccinelle/api/stream_open.cocci added in 10dce8af3422 ("fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock"), search and convert to stream_open all in-kernel nonseekable_open users for which read and write actually do not depend on ppos and where there is no other methods in file_operations which assume @offset access. I've verified each generated change manually - that it is correct to convert - and each other nonseekable_open instance left - that it is either not correct to convert there, or that it is not converted due to current stream_open.cocci limitations. The script also does not convert files that should be valid to convert, but that currently have .llseek = noop_llseek or generic_file_llseek for unknown reason despite file being opened with nonseekable_open (e.g. drivers/input/mousedev.c) Among cases converted 14 were potentially vulnerable to read vs write deadlock (see details in 10dce8af3422): drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/infiniband/core/user_mad.c:988:1-17: ERROR: umad_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/misc/uinput.c:401:1-17: ERROR: uinput_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. and the rest were just safe to convert to stream_open because their read and write do not use ppos at all and corresponding file_operations do not have methods that assume @offset file access(*): arch/powerpc/platforms/52xx/mpc52xx_gpt.c:631:8-24: WARNING: mpc52xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/um/drivers/harddog_kern.c:88:8-24: WARNING: harddog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/x86/kernel/cpu/microcode/core.c:430:33-49: WARNING: microcode_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ds1620.c:215:8-24: WARNING: ds1620_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/dtlk.c:301:1-17: WARNING: dtlk_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ipmi/ipmi_watchdog.c:840:9-25: WARNING: ipmi_wdog_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/pcmcia/scr24x_cs.c:95:8-24: WARNING: scr24x_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/tb0219.c:246:9-25: WARNING: tb0219_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/firewire/nosy.c:306:8-24: WARNING: nosy_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/fschmd.c:840:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/w83793.c:1344:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucma.c:1747:8-24: WARNING: ucma_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucm.c:1178:8-24: WARNING: ucm_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/uverbs_main.c:1086:8-24: WARNING: uverbs_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/input/joydev.c:282:1-17: WARNING: joydev_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/pci/switch/switchtec.c:393:1-17: WARNING: switchtec_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/platform/chrome/cros_ec_debugfs.c:135:8-24: WARNING: cros_ec_console_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-ds1374.c:470:9-25: WARNING: ds1374_wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-m41t80.c:805:9-25: WARNING: wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/tape_char.c:293:2-18: WARNING: tape_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/zcore.c:194:8-24: WARNING: zcore_reipl_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/crypto/zcrypt_api.c:528:8-24: WARNING: zcrypt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/spi/spidev.c:594:1-17: WARNING: spidev_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/staging/pi433/pi433_if.c:974:1-17: WARNING: pi433_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/acquirewdt.c:203:8-24: WARNING: acq_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/advantechwdt.c:202:8-24: WARNING: advwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim1535_wdt.c:252:8-24: WARNING: ali_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim7101_wdt.c:217:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ar7_wdt.c:166:8-24: WARNING: ar7_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/at91rm9200_wdt.c:113:8-24: WARNING: at91wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ath79_wdt.c:135:8-24: WARNING: ath79_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/bcm63xx_wdt.c:119:8-24: WARNING: bcm63xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpu5wdt.c:143:8-24: WARNING: cpu5wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpwd.c:397:8-24: WARNING: cpwd_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/eurotechwdt.c:319:8-24: WARNING: eurwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/f71808e_wdt.c:528:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/gef_wdt.c:232:8-24: WARNING: gef_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/geodewdt.c:95:8-24: WARNING: geodewdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ib700wdt.c:241:8-24: WARNING: ibwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ibmasr.c:326:8-24: WARNING: asr_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/indydog.c:80:8-24: WARNING: indydog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/intel_scu_watchdog.c:307:8-24: WARNING: intel_scu_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/iop_wdt.c:104:8-24: WARNING: iop_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/it8712f_wdt.c:330:8-24: WARNING: it8712f_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ixp4xx_wdt.c:68:8-24: WARNING: ixp4xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ks8695_wdt.c:145:8-24: WARNING: ks8695wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/m54xx_wdt.c:88:8-24: WARNING: m54xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/machzwd.c:336:8-24: WARNING: zf_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mixcomwd.c:153:8-24: WARNING: mixcomwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mtx-1_wdt.c:121:8-24: WARNING: mtx1_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mv64x60_wdt.c:136:8-24: WARNING: mv64x60_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nuc900_wdt.c:134:8-24: WARNING: nuc900wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nv_tco.c:164:8-24: WARNING: nv_tco_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pc87413_wdt.c:289:8-24: WARNING: pc87413_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:698:8-24: WARNING: pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:737:8-24: WARNING: pcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:581:8-24: WARNING: pcipcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:623:8-24: WARNING: pcipcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:488:8-24: WARNING: usb_pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:527:8-24: WARNING: usb_pcwd_temperature_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pika_wdt.c:121:8-24: WARNING: pikawdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pnx833x_wdt.c:119:8-24: WARNING: pnx833x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rc32434_wdt.c:153:8-24: WARNING: rc32434_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rdc321x_wdt.c:145:8-24: WARNING: rdc321x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/riowd.c:79:1-17: WARNING: riowd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sa1100_wdt.c:62:8-24: WARNING: sa1100dog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc60xxwdt.c:211:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc7240_wdt.c:139:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc8360.c:274:8-24: WARNING: sbc8360_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_epx_c3.c:81:8-24: WARNING: epx_c3_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_fitpc2_wdt.c:78:8-24: WARNING: fitpc2_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sb_wdog.c:108:1-17: WARNING: sbwdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc1200wdt.c:181:8-24: WARNING: sc1200wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc520_wdt.c:261:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sch311x_wdt.c:319:8-24: WARNING: sch311x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/scx200_wdt.c:105:8-24: WARNING: scx200_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/smsc37b787_wdt.c:369:8-24: WARNING: wb_smsc_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83877f_wdt.c:227:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83977f_wdt.c:301:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wafer5823wdt.c:200:8-24: WARNING: wafwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/watchdog_dev.c:828:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:379:8-24: WARNING: wdrtas_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:445:8-24: WARNING: wdrtas_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt285.c:104:1-17: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt977.c:276:8-24: WARNING: wdt977_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:424:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:484:8-24: WARNING: wdt_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:464:8-24: WARNING: wdtpci_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:527:8-24: WARNING: wdtpci_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. net/batman-adv/log.c:105:1-17: WARNING: batadv_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/control.c:57:7-23: WARNING: snd_ctl_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/rawmidi.c:385:7-23: WARNING: snd_rawmidi_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/seq/seq_clientmgr.c:310:7-23: WARNING: snd_seq_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/timer.c:1428:7-23: WARNING: snd_timer_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. One can also recheck/review the patch via generating it with explanation comments included via $ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci SPFLAGS="-D explain" (*) This second group also contains cases with read/write deadlocks that stream_open.cocci don't yet detect, but which are still valid to convert to stream_open since ppos is not used. For example drivers/pci/switch/switchtec.c calls wait_for_completion_interruptible() in its .read, but stream_open.cocci currently detects only "wait_event*" as blocking. Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yongzhi Pan <panyongzhi@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Tejun Heo <tj@kernel.org> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Nikolaus Rath <Nikolaus@rath.org> Cc: Han-Wen Nienhuys <hanwen@google.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James R. Van Zandt" <jrv@vanzandt.mv.com> Cc: Corey Minyard <minyard@acm.org> Cc: Harald Welte <laforge@gnumonks.org> Acked-by: Lubomir Rintel <lkundrak@v3.sk> [scr24x_cs] Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Johan Hovold <johan@kernel.org> Cc: David Herrmann <dh.herrmann@googlemail.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Jean Delvare <jdelvare@suse.com> Acked-by: Guenter Roeck <linux@roeck-us.net> [watchdog/* hwmon/*] Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Logan Gunthorpe <logang@deltatee.com> [drivers/pci/switch/switchtec] Acked-by: Bjorn Helgaas <bhelgaas@google.com> [drivers/pci/switch/switchtec] Cc: Benson Leung <bleung@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> [platform/chrome] Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [rtc/*] Cc: Mark Brown <broonie@kernel.org> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Zwane Mwaikambo <zwanem@gmail.com> Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <a@unstable.cc> Cc: "David S. Miller" <davem@davemloft.net> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
2019-05-06Merge branch 'pm-x86'Rafael J. Wysocki
* pm-x86: x86: tsc: Rework time_cpufreq_notifier() admin-guide: pm: intel_epb: Add SPDX license tag and copyright notice PM / arch: x86: MSR_IA32_ENERGY_PERF_BIAS sysfs interface PM / arch: x86: Rework the MSR_IA32_ENERGY_PERF_BIAS handling
2019-05-06x86/fpu: Fault-in user stack if copy_fpstate_to_sigframe() failsSebastian Andrzej Siewior
In the compacted form, XSAVES may save only the XMM+SSE state but skip FP (x87 state). This is denoted by header->xfeatures = 6. The fastpath (copy_fpregs_to_sigframe()) does that but _also_ initialises the FP state (cwd to 0x37f, mxcsr as we do, remaining fields to 0). The slowpath (copy_xstate_to_user()) leaves most of the FP state untouched. Only mxcsr and mxcsr_flags are set due to xfeatures_mxcsr_quirk(). Now that XFEATURE_MASK_FP is set unconditionally, see 04944b793e18 ("x86: xsave: set FP, SSE bits in the xsave header in the user sigcontext"), on return from the signal, random garbage is loaded as the FP state. Instead of utilizing copy_xstate_to_user(), fault-in the user memory and retry the fast path. Ideally, the fast path succeeds on the second attempt but may be retried again if the memory is swapped out due to memory pressure. If the user memory can not be faulted-in then get_user_pages() returns an error so we don't loop forever. Fault in memory via get_user_pages_unlocked() so copy_fpregs_to_sigframe() succeeds without a fault. Fixes: 69277c98f5eef ("x86/fpu: Always store the registers in copy_fpstate_to_sigframe()") Reported-by: Kurt Kanzenbach <kurt.kanzenbach@linutronix.de> Suggested-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: "linux-mm@kvack.org" <linux-mm@kvack.org> Cc: Qian Cai <cai@lca.pw> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190502171139.mqtegctsg35cir2e@linutronix.de
2019-04-30kvm, x86: Properly check whether a pfn is an MMIO or notKarimAllah Ahmed
pfn_valid check is not sufficient because it only checks if a page has a struct page or not, if "mem=" was passed to the kernel some valid pages won't have a struct page. This means that if guests were assigned valid memory that lies after the mem= boundary it will be passed uncached to the guest no matter what the guest caching attributes are for this memory. Introduce a new function e820__mapped_raw_any which is equivalent to e820__mapped_any but uses the original e820 unmodified and use it to identify real *RAM*. Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-30x86/alternatives: Add comment about module removal racesNadav Amit
Add a comment to clarify that users of text_poke() must ensure that no races with module removal take place. Signed-off-by: Nadav Amit <namit@vmware.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <akpm@linux-foundation.org> Cc: <ard.biesheuvel@linaro.org> Cc: <deneen.t.dock@intel.com> Cc: <kernel-hardening@lists.openwall.com> Cc: <kristen@linux.intel.com> Cc: <linux_dti@icloud.com> Cc: <will.deacon@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190426001143.4983-22-namit@vmware.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-30x86/kprobes: Use vmalloc special flagRick Edgecombe
Use new flag VM_FLUSH_RESET_PERMS for handling freeing of special permissioned memory in vmalloc and remove places where memory was set NX and RW before freeing which is no longer needed. Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <akpm@linux-foundation.org> Cc: <ard.biesheuvel@linaro.org> Cc: <deneen.t.dock@intel.com> Cc: <kernel-hardening@lists.openwall.com> Cc: <kristen@linux.intel.com> Cc: <linux_dti@icloud.com> Cc: <will.deacon@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190426001143.4983-21-namit@vmware.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-30x86/ftrace: Use vmalloc special flagRick Edgecombe
Use new flag VM_FLUSH_RESET_PERMS for handling freeing of special permissioned memory in vmalloc and remove places where memory was set NX and RW before freeing which is no longer needed. Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: <akpm@linux-foundation.org> Cc: <ard.biesheuvel@linaro.org> Cc: <deneen.t.dock@intel.com> Cc: <kernel-hardening@lists.openwall.com> Cc: <kristen@linux.intel.com> Cc: <linux_dti@icloud.com> Cc: <will.deacon@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190426001143.4983-20-namit@vmware.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-30x86/alternatives: Remove the return value of text_poke_*()Nadav Amit
The return value of text_poke_early() and text_poke_bp() is useless. Remove it. Signed-off-by: Nadav Amit <namit@vmware.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <akpm@linux-foundation.org> Cc: <ard.biesheuvel@linaro.org> Cc: <deneen.t.dock@intel.com> Cc: <kernel-hardening@lists.openwall.com> Cc: <kristen@linux.intel.com> Cc: <linux_dti@icloud.com> Cc: <will.deacon@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190426001143.4983-14-namit@vmware.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-30x86/jump-label: Remove support for custom text pokerNadav Amit
There are only two types of text poking: early and breakpoint based. The use of a function pointer to perform text poking complicates the code and is probably inefficient due to the use of indirect branches. Signed-off-by: Nadav Amit <namit@vmware.com> Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <akpm@linux-foundation.org> Cc: <ard.biesheuvel@linaro.org> Cc: <deneen.t.dock@intel.com> Cc: <kernel-hardening@lists.openwall.com> Cc: <kristen@linux.intel.com> Cc: <linux_dti@icloud.com> Cc: <will.deacon@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190426001143.4983-13-namit@vmware.com Signed-off-by: Ingo Molnar <mingo@kernel.org>