summaryrefslogtreecommitdiff
path: root/arch/s390/kernel/process.c
AgeCommit message (Collapse)Author
2023-07-03s390: include linux/io.h instead of asm/io.hHeiko Carstens
Include linux/io.h instead of asm/io.h everywhere. linux/io.h includes asm/io.h, so this shouldn't cause any problems. Instead this might help for some randconfig build errors which were reported due to some undefined io related functions. Also move the changed include so it stays grouped together with other includes from the same directory. For ctcm_mpc.c also remove not needed comments (actually questions). Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2023-03-13s390: trim ancient junk from copy_thread()Al Viro
Setting and ->psw.addr in childregs of kernel thread is a rudiment of the old kernel_thread()/kernel_execve() implementation. Mainline hadn't been using them since 2012. And clarify the assignments to frame->sf.gprs - the array stores grp6..gpr15 values to be set by __switch_to(), so frame->sf.gprs[5] actually affects grp11, etc. Better spell that as frame->sf.gprs[11 - 6]... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/r/ZAU6BYFisE8evmYf@ZenIV Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2023-01-13s390/mm: start kernel with DAT enabledAlexander Gordeev
The setup of the kernel virtual address space is spread throughout the sources, boot stages and config options like this: 1. The available physical memory regions are queried and stored as mem_detect information for later use in the decompressor. 2. Based on the physical memory availability the virtual memory layout is established in the decompressor; 3. If CONFIG_KASAN is disabled the kernel paging setup code populates kernel pgtables and turns DAT mode on. It uses the information stored at step [1]. 4. If CONFIG_KASAN is enabled the kernel early boot kasan setup populates kernel pgtables and turns DAT mode on. It uses the information stored at step [1]. The kasan setup creates early_pg_dir directory and directly overwrites swapper_pg_dir entries to make shadow memory pages available. Move the kernel virtual memory setup to the decompressor and start the kernel with DAT turned on right from the very first istruction. That completely eliminates the boot phase when the kernel runs in DAT-off mode, simplies the overall design and consolidates pgtables setup. The identity mapping is created in the decompressor, while kasan shadow mappings are still created by the early boot kernel code. Share with decompressor the existing kasan memory allocator. It decreases the size of a newly requested memory block from pgalloc_pos and ensures that kernel image is not overwritten. pgalloc_low and pgalloc_pos pointers are made preserved boot variables for that. Use the bootdata infrastructure to setup swapper_pg_dir and invalid_pg_dir directories used by the kernel later. The interim early_pg_dir directory established by the kasan initialization code gets eliminated as result. As the kernel runs in DAT-on mode only the PSW_KERNEL_BITS define gets PSW_MASK_DAT bit by default. Additionally, the setup_lowcore_dat_off() and setup_lowcore_dat_on() routines get merged, since there is no DAT-off mode stage anymore. The memory mappings are created with RW+X protection that allows the early boot code setting up all necessary data and services for the kernel being booted. Just before the paging is enabled the memory protection is changed to RO+X for text, RO+NX for read-only data and RW+NX for kernel data and the identity mapping. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-11-18treewide: use get_random_u32_below() instead of deprecated functionJason A. Donenfeld
This is a simple mechanical transformation done by: @@ expression E; @@ - prandom_u32_max + get_random_u32_below (E) Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Reviewed-by: SeongJae Park <sj@kernel.org> # for damon Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11treewide: use get_random_{u8,u16}() when possible, part 2Jason A. Donenfeld
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value, simply use the get_random_{u8,u16}() functions, which are faster than wasting the additional bytes from a 32-bit value. This was done by hand, identifying all of the places where one of the random integer functions was used in a non-32-bit context. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11treewide: use prandom_u32_max() when possible, part 1Jason A. Donenfeld
Rather than incurring a division or requesting too many random bytes for the given range, use the prandom_u32_max() function, which only takes the minimum required bytes from the RNG and avoids divisions. This was done mechanically with this coccinelle script: @basic@ expression E; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u64; @@ ( - ((T)get_random_u32() % (E)) + prandom_u32_max(E) | - ((T)get_random_u32() & ((E) - 1)) + prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2) | - ((u64)(E) * get_random_u32() >> 32) + prandom_u32_max(E) | - ((T)get_random_u32() & ~PAGE_MASK) + prandom_u32_max(PAGE_SIZE) ) @multi_line@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; identifier RAND; expression E; @@ - RAND = get_random_u32(); ... when != RAND - RAND %= (E); + RAND = prandom_u32_max(E); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Add one to the literal. @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1: print("Skipping 0x%x for cleanup elsewhere" % (value)) cocci.include_match(False) elif value & (value + 1) != 0: print("Skipping 0x%x because it's not a power of two minus one" % (value)) cocci.include_match(False) elif literal.startswith('0x'): coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1)) else: coccinelle.RESULT = cocci.make_expr("%d" % (value + 1)) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; expression add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + prandom_u32_max(RESULT) @collapse_ret@ type T; identifier VAR; expression E; @@ { - T VAR; - VAR = (E); - return VAR; + return E; } @drop_var@ type T; identifier VAR; @@ { - T VAR; ... when != VAR } Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: KP Singh <kpsingh@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-08-25s390: fix double free of GS and RI CBs on fork() failureBrian Foster
The pointers for guarded storage and runtime instrumentation control blocks are stored in the thread_struct of the associated task. These pointers are initially copied on fork() via arch_dup_task_struct() and then cleared via copy_thread() before fork() returns. If fork() happens to fail after the initial task dup and before copy_thread(), the newly allocated task and associated thread_struct memory are freed via free_task() -> arch_release_task_struct(). This results in a double free of the guarded storage and runtime info structs because the fields in the failed task still refer to memory associated with the source task. This problem can manifest as a BUG_ON() in set_freepointer() (with CONFIG_SLAB_FREELIST_HARDENED enabled) or KASAN splat (if enabled) when running trinity syscall fuzz tests on s390x. To avoid this problem, clear the associated pointer fields in arch_dup_task_struct() immediately after the new task is copied. Note that the RI flag is still cleared in copy_thread() because it resides in thread stack memory and that is where stack info is copied. Signed-off-by: Brian Foster <bfoster@redhat.com> Fixes: 8d9047f8b967c ("s390/runtime instrumentation: simplify task exit handling") Fixes: 7b83c6297d2fc ("s390/guarded storage: simplify task exit handling") Cc: <stable@vger.kernel.org> # 4.15 Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Link: https://lore.kernel.org/r/20220816155407.537372-1-bfoster@redhat.com Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-05-07fork: Generalize PF_IO_WORKER handlingEric W. Biederman
Add fn and fn_arg members into struct kernel_clone_args and test for them in copy_thread (instead of testing for PF_KTHREAD | PF_IO_WORKER). This allows any task that wants to be a user space task that only runs in kernel mode to use this functionality. The code on x86 is an exception and still retains a PF_KTHREAD test because x86 unlikely everything else handles kthreads slightly differently than user space tasks that start with a function. The functions that created tasks that start with a function have been updated to set ".fn" and ".fn_arg" instead of ".stack" and ".stack_size". These functions are fork_idle(), create_io_thread(), kernel_thread(), and user_mode_thread(). Link: https://lkml.kernel.org/r/20220506141512.516114-4-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2022-05-07fork: Pass struct kernel_clone_args into copy_threadEric W. Biederman
With io_uring we have started supporting tasks that are for most purposes user space tasks that exclusively run code in kernel mode. The kernel task that exec's init and tasks that exec user mode helpers are also user mode tasks that just run kernel code until they call kernel execve. Pass kernel_clone_args into copy_thread so these oddball tasks can be supported more cleanly and easily. v2: Fix spelling of kenrel_clone_args on h8300 Link: https://lkml.kernel.org/r/20220506141512.516114-2-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-12-16s390/exit: remove dead reference to do_exit from copy_threadEric W. Biederman
My s390 assembly is not particularly good so I have read the history of the reference to do_exit copy_thread and have been able to verify that do_exit is not used. The general argument is that s390 has been changed to use the generic kernel_thread and kernel_execve and the generic versions do not call do_exit. So it is strange to see a do_exit reference sitting there. The history of the do_exit reference in s390's version of copy_thread seems conclusive that the do_exit reference is something that lingers and should have been removed several years ago. Up through 8d19f15a60be ("[PATCH] s390 update (1/27): arch.") the s390 code made a call to the exit(2) system call when a kernel thread finished. Then kernel_thread_starter was added which branched directly to the value in register 11 when the kernel thread finshed. The value in register 11 was set in kernel_thread to "regs.gprs[11] = (unsigned long) do_exit" In commit 37fe5d41f640 ("s390: fold kernel_thread_helper() into ret_from_fork()") kernel_thread_starter was moved into entry.S and entry64.S unchanged (except for the syntax differences between inline assemly and in the assembly file). In commit f9a7e025dfc2 ("s390: switch to generic kernel_thread()") the assignment to "gprs[11]" was moved into copy_thread from the old kernel_thread. The helper kernel_thread_starter was still being used and was still branching to "%r11" at the end. In commit 30dcb0996e40 ("s390: switch to saner kernel_execve() semantics") kernel_thread_starter was changed to unconditionally branch to sysc_tracenogo instead to %r11 which held the value of do_exit. Unfortunately copy_thread was not updated to stop passing do_exit in "gprs[11]". In commit 56e62a737028 ("s390: convert to generic entry") kernel_thread_starter was replaced by __ret_from_fork. And the code still continued to pass do_exit in "gprs[11]" despite __ret_from_fork not caring in the slightest. Remove this dead reference to do_exit to make it clear that s390 is not doing anything with do_exit in copy_thread. History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Fixes: 30dcb0996e40 ("s390: switch to saner kernel_execve() semantics") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Link: https://lore.kernel.org/r/20211208202532.16409-1-ebiederm@xmission.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-11-06Merge tag 's390-5.16-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Add support for ftrace with direct call and ftrace direct call samples. - Add support for kernel command lines longer than current 896 bytes and make its length configurable. - Add support for BEAR enhancement facility to improve last breaking event instruction tracking. - Add kprobes sanity checks and testcases to prevent kprobe in the mid of an instruction. - Allow concurrent access to /dev/hwc for the CPUMF users. - Various ftrace / jump label improvements. - Convert unwinder tests to KUnit. - Add s390_iommu_aperture kernel parameter to tweak the limits on concurrently usable DMA mappings. - Add ap.useirq AP module option which can be used to disable interrupt use. - Add add_disk() error handling support to block device drivers. - Drop arch specific and use generic implementation of strlcpy and strrchr. - Several __pa/__va usages fixes. - Various cio, crypto, pci, kernel doc and other small fixes and improvements all over the code. [ Merge fixup as per https://lore.kernel.org/all/YXAqZ%2FEszRisunQw@osiris/ ] * tag 's390-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (63 commits) s390: make command line configurable s390: support command lines longer than 896 bytes s390/kexec_file: move kernel image size check s390/pci: add s390_iommu_aperture kernel parameter s390/spinlock: remove incorrect kernel doc indicator s390/string: use generic strlcpy s390/string: use generic strrchr s390/ap: function rework based on compiler warning s390/cio: make ccw_device_dma_* more robust s390/vfio-ap: s390/crypto: fix all kernel-doc warnings s390/hmcdrv: fix kernel doc comments s390/ap: new module option ap.useirq s390/cpumf: Allow multiple processes to access /dev/hwc s390/bitops: return true/false (not 1/0) from bool functions s390: add support for BEAR enhancement facility s390: introduce nospec_uses_trampoline() s390: rename last_break to pgm_last_break s390/ptrace: add last_break member to pt_regs s390/sclp: sort out physical vs virtual pointers usage s390/setup: convert start and end initrd pointers to virtual ...
2021-10-26s390: add support for BEAR enhancement facilitySven Schnelle
The Breaking-Event-Address-Register (BEAR) stores the address of the last breaking event instruction. Breaking events are usually instructions that change the program flow - for example branches, and instructions that modify the address in the PSW like lpswe. This is useful for debugging wild branches, because one could easily figure out where the wild branch was originating from. What is problematic is that lpswe is considered a breaking event, and therefore overwrites BEAR on kernel exit. The BEAR enhancement facility adds new instructions that allow to save/restore BEAR and also an lpswey instruction that doesn't cause a breaking event. So we can save BEAR on kernel entry and restore it on exit to user space. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-15sched: Add wrapper for get_wchan() to keep task blockedKees Cook
Having a stable wchan means the process must be blocked and for it to stay that way while performing stack unwinding. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [arm] Tested-by: Mark Rutland <mark.rutland@arm.com> [arm64] Link: https://lkml.kernel.org/r/20211008111626.332092234@infradead.org
2021-07-08s390/signal: switch to using vdso for sigreturn and syscall restartSven Schnelle
with generic entry, there's a bug when it comes to restarting of signals. The failing sequence is: a) a signal is coming in, and no handler is registered, so the lower part of arch_do_signal_or_restart() in arch/s390/kernel/signal.c sets PIF_SYSCALL_RESTART. b) a second signal gets pending while the kernel is still in the exit loop, and for that one, a handler exists. c) The first part of arch_do_signal_or_restart() is called. That part calls handle_signal(), which sets up stack + registers for handling the signal. d) __do_syscall() in arch/s390/kernel/syscall.c checks for PIF_SYSCALL_RESTART right before leaving to userspace. If it is set, it restart's the syscall. However, the registers are already setup for handling a signal from c). The syscall is now restarted with the wrong arguments. Change the code to: - use vdso for syscall_restart() instead of PIF_SYSCALL_RESTART because we cannot rewind and go back to userspace on s390 because the system call number might be encoded in the svc instruction. - for all other syscalls we rewind the PSW and return to userspace. Cc: <stable@kernel.org> # v5.12+ d57778feb987: s390/vdso: always enable vdso Cc: <stable@kernel.org> # v5.12+ 686341f2548b: s390/vdso64: add sigreturn,rt_sigreturn and restart_syscall Cc: <stable@kernel.org> # v5.12+ 43e1f76b0b69: s390/vdso: rename VDSO64_LBASE to VDSO_LBASE Cc: <stable@kernel.org> # v5.12+ 779df2248739: s390/vdso: add minimal compat vdso Cc: <stable@kernel.org> # v5.12+ Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-18sched: Introduce task_is_running()Peter Zijlstra
Replace a bunch of 'p->state == TASK_RUNNING' with a new helper: task_is_running(p). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Davidlohr Bueso <dave@stgolabs.net> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210611082838.222401495@infradead.org
2021-02-21arch: setup PF_IO_WORKER threads like PF_KTHREADJens Axboe
PF_IO_WORKER are kernel threads too, but they aren't PF_KTHREAD in the sense that we don't assign ->set_child_tid with our own structure. Just ensure that every arch sets up the PF_IO_WORKER threads like kthreads in the arch implementation of copy_thread(). Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-19s390: convert to generic entrySven Schnelle
This patch converts s390 to use the generic entry infrastructure from kernel/entry/*. There are a few special things on s390: - PIF_PER_TRAP is moved to TIF_PER_TRAP as the generic code doesn't know about our PIF flags in exit_to_user_mode_loop(). - The old code had several ways to restart syscalls: a) PIF_SYSCALL_RESTART, which was only set during execve to force a restart after upgrading a process (usually qemu-kvm) to pgste page table extensions. b) PIF_SYSCALL, which is set by do_signal() to indicate that the current syscall should be restarted. This is changed so that do_signal() now also uses PIF_SYSCALL_RESTART. Continuing to use PIF_SYSCALL doesn't work with the generic code, and changing it to PIF_SYSCALL_RESTART makes PIF_SYSCALL and PIF_SYSCALL_RESTART more unique. - On s390 calling sys_sigreturn or sys_rt_sigreturn is implemented by executing a svc instruction on the process stack which causes a fault. While handling that fault the fault code sets PIF_SYSCALL to hand over processing to the syscall code on exit to usermode. The patch introduces PIF_SYSCALL_RET_SET, which is set if ptrace sets a return value for a syscall. The s390x ptrace ABI uses r2 both for the syscall number and return value, so ptrace cannot set the syscall number + return value at the same time. The flag makes handling that a bit easier. do_syscall() will just skip executing the syscall if PIF_SYSCALL_RET_SET is set. CONFIG_DEBUG_ASCE was removd in favour of the generic CONFIG_DEBUG_ENTRY. CR1/7/13 will be checked both on kernel entry and exit to contain the correct asces. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-11-23s390/mm: remove set_fs / rework address space handlingHeiko Carstens
Remove set_fs support from s390. With doing this rework address space handling and simplify it. As a result address spaces are now setup like this: CPU running in | %cr1 ASCE | %cr7 ASCE | %cr13 ASCE ----------------------------|-----------|-----------|----------- user space | user | user | kernel kernel, normal execution | kernel | user | kernel kernel, kvm guest execution | gmap | user | kernel To achieve this the getcpu vdso syscall is removed in order to avoid secondary address mode and a separate vdso address space in for user space. The getcpu vdso syscall will be implemented differently with a subsequent patch. The kernel accesses user space always via secondary address space. This happens in different ways: - with mvcos in home space mode and directly read/write to secondary address space - with mvcs/mvcp in primary space mode and copy from primary space to secondary space or vice versa - with e.g. cs in secondary space mode and access secondary space Switching translation modes happens with sacf before and after instructions which access user space, like before. Lazy handling of control register reloading is removed in the hope to make everything simpler, but at the cost of making kernel entry and exit a bit slower. That is: on kernel entry the primary asce is always changed to contain the kernel asce, and on kernel exit the primary asce is changed again so it contains the user asce. In kernel mode there is only one exception to the primary asce: when kvm guests are executed the primary asce contains the gmap asce (which describes the guest address space). The primary asce is reset to kernel asce whenever kvm guest execution is interrupted, so that this doesn't has to be taken into account for any user space accesses. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-08-09Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull regset conversion fix from Al Viro: "Fix a regression from an unnoticed bisect hazard in the regset series. A bunch of old (aout, originally) primitives used by coredumps became dead code after fdpic conversion to regsets. Removal of that dead code had been the first commit in the followups to regset series; unfortunately, it happened to hide the bisect hazard on sh (extern for fpregs_get() had not been updated in the main series when it should have been; followup simply made fpregs_get() static). And without that followup commit this bisect hazard became breakage in the mainline" Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: kill unused dump_fpu() instances
2020-07-27kill unused dump_fpu() instancesAl Viro
dump_fpu() is used only on the architectures that support elf and have neither CORE_DUMP_USE_REGSET nor ELF_CORE_COPY_FPREGS defined. Currently that's csky, m68k, microblaze, nds32 and unicore32. The rest of the instances are dead code. NB: THIS MUST GO AFTER ELF_FDPIC CONVERSION Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-07-04arch: rename copy_thread_tls() back to copy_thread()Christian Brauner
Now that HAVE_COPY_THREAD_TLS has been removed, rename copy_thread_tls() back simply copy_thread(). It's a simpler name, and doesn't imply that only tls is copied here. This finishes an outstanding chunk of internal process creation work since we've added clone3(). Cc: linux-arch@vger.kernel.org Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>A Acked-by: Stafford Horne <shorne@gmail.com> Acked-by: Greentime Hu <green.hu@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>A Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-03-10s390: prevent leaking kernel address in BEARSven Schnelle
When userspace executes a syscall or gets interrupted, BEAR contains a kernel address when returning to userspace. This make it pretty easy to figure out where the kernel is mapped even with KASLR enabled. To fix this, add lpswe to lowcore and always execute it there, so userspace sees only the lowcore address of lpswe. For this we have to extend both critical_cleanup and the SWITCH_ASYNC macro to also check for lpswe addresses in lowcore. Fixes: b2d24b97b2a9 ("s390/kernel: add support for kernel address space layout randomization (KASLR)") Cc: <stable@vger.kernel.org> # v5.2+ Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-10-31s390/process: avoid custom stack unwinding in get_wchanVasily Gorbik
Currently get_wchan uses custom stack unwinding implementation which relies on back_chain presence. Replace it with more abstract stack unwinding api usage. Suggested-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-08-21s390/kasan: avoid report in get_wchanVasily Gorbik
Reading other running task's stack can be a dangerous endeavor. Kasan stack memory access instrumentation includes special prologue and epilogue to mark/remove red zones in shadow memory between stack variables. For that reason there is always a race between a task reading value in other task's stack and that other task returning from a function and entering another one generating different red zones pattern. To avoid kasan reports simply perform uninstrumented memory reads. Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-08-21s390/process: avoid potential reading of freed stackVasily Gorbik
With THREAD_INFO_IN_TASK (which is selected on s390) task's stack usage is refcounted and should always be protected by get/put when touching other task's stack to avoid race conditions with task's destruction code. Fixes: d5c352cdd022 ("s390: move thread_info into task_struct") Cc: stable@vger.kernel.org # v4.10+ Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-05-02s390/unwind: introduce stack unwind APIMartin Schwidefsky
Rework the dump_trace() stack unwinder interface to support different unwinding algorithms. The new interface looks like this: struct unwind_state state; unwind_for_each_frame(&state, task, regs, start_stack) do_something(state.sp, state.ip, state.reliable); The unwind_bc.c file contains the implementation for the classic back-chain unwinder. One positive side effect of the new code is it now handles ftraced functions gracefully. It prints the real name of the return function instead of 'return_to_handler'. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-04-23s390: update sampling tag after task pid changeMartin Schwidefsky
In a multi-threaded program any thread can call execve(). If this is not done by the thread group leader, the de_thread() function replaces the pid of the task that calls execve() with the pid of thread group leader. If the task reaches user space again without going over __switch_to() the sampling tag is still set to the old pid. Define the arch_setup_new_exec function to verify the task pid and udpate the tag with LPP if it has changed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-11-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: "Since Martin is on vacation you get the s390 pull request for the v4.15 merge window this time from me. Besides a lot of cleanups and bug fixes these are the most important changes: - a new regset for runtime instrumentation registers - hardware accelerated AES-GCM support for the aes_s390 module - support for the new CEX6S crypto cards - support for FORTIFY_SOURCE - addition of missing z13 and new z14 instructions to the in-kernel disassembler - generate opcode tables for the in-kernel disassembler out of a simple text file instead of having to manually maintain those tables - fast memset16, memset32 and memset64 implementations - removal of named saved segment support - hardware counter support for z14 - queued spinlocks and queued rwlocks implementations for s390 - use the stack_depth tracking feature for s390 BPF JIT - a new s390_sthyi system call which emulates the sthyi (store hypervisor information) instruction - removal of the old KVM virtio transport - an s390 specific CPU alternatives implementation which is used in the new spinlock code" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (88 commits) MAINTAINERS: add virtio-ccw.h to virtio/s390 section s390/noexec: execute kexec datamover without DAT s390: fix transactional execution control register handling s390/bpf: take advantage of stack_depth tracking s390: simplify transactional execution elf hwcap handling s390/zcrypt: Rework struct ap_qact_ap_info. s390/virtio: remove unused header file kvm_virtio.h s390: avoid undefined behaviour s390/disassembler: generate opcode tables from text file s390/disassembler: remove insn_to_mnemonic() s390/dasd: avoid calling do_gettimeofday() s390: vfio-ccw: Do not attempt to free no-op, test and tic cda. s390: remove named saved segment support s390/archrandom: Reconsider s390 arch random implementation s390/pci: do not require AIS facility s390/qdio: sanitize put_indicator s390/qdio: use atomic_cmpxchg s390/nmi: avoid using long-displacement facility s390: pass endianness info to sparse s390/decompressor: remove informational messages ...
2017-11-10s390: fix transactional execution control register handlingHeiko Carstens
Dan Horák reported the following crash related to transactional execution: User process fault: interruption code 0013 ilc:3 in libpthread-2.26.so[3ff93c00000+1b000] CPU: 2 PID: 1 Comm: /init Not tainted 4.13.4-300.fc27.s390x #1 Hardware name: IBM 2827 H43 400 (z/VM 6.4.0) task: 00000000fafc8000 task.stack: 00000000fafc4000 User PSW : 0705200180000000 000003ff93c14e70 R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:1 AS:0 CC:2 PM:0 RI:0 EA:3 User GPRS: 0000000000000077 000003ff00000000 000003ff93144d48 000003ff93144d5e 0000000000000000 0000000000000002 0000000000000000 000003ff00000000 0000000000000000 0000000000000418 0000000000000000 000003ffcc9fe770 000003ff93d28f50 000003ff9310acf0 000003ff92b0319a 000003ffcc9fe6d0 User Code: 000003ff93c14e62: 60e0b030 std %f14,48(%r11) 000003ff93c14e66: 60f0b038 std %f15,56(%r11) #000003ff93c14e6a: e5600000ff0e tbegin 0,65294 >000003ff93c14e70: a7740006 brc 7,3ff93c14e7c 000003ff93c14e74: a7080000 lhi %r0,0 000003ff93c14e78: a7f40023 brc 15,3ff93c14ebe 000003ff93c14e7c: b2220000 ipm %r0 000003ff93c14e80: 8800001c srl %r0,28 There are several bugs with control register handling with respect to transactional execution: - on task switch update_per_regs() is only called if the next task has an mm (is not a kernel thread). This however is incorrect. This breaks e.g. for user mode helper handling, where the kernel creates a kernel thread and then execve's a user space program. Control register contents related to transactional execution won't be updated on execve. If the previous task ran with transactional execution disabled then the new task will also run with transactional execution disabled, which is incorrect. Therefore call update_per_regs() unconditionally within switch_to(). - on startup the transactional execution facility is not enabled for the idle thread. This is not really a bug, but an inconsistency to other facilities. Therefore enable the facility if it is available. - on fork the new thread's per_flags field is not cleared. This means that a child process inherits the PER_FLAG_NO_TE flag. This flag can be set with a ptrace request to disable transactional execution for the current process. It should not be inherited by new child processes in order to be consistent with the handling of all other PER related debugging options. Therefore clear the per_flags field in copy_thread_tls(). Reported-and-tested-by: Dan Horák <dan@danny.cz> Fixes: d35339a42dd1 ("s390: add support for transactional memory") Cc: <stable@vger.kernel.org> # v3.7+ Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-28s390: get rid of exit_thread()Heiko Carstens
exit_thread() is empty now. Therefore remove it and get rid of a pointless branch. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-28s390/guarded storage: simplify task exit handlingHeiko Carstens
Free data structures required for guarded storage from arch_release_task_struct(). This allows to simplify the code a bit, and also makes the semantics a bit easier: arch_release_task_struct() is never called from the task that is being removed. In addition this allows to get rid of exit_thread() in a later patch. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-28s390/runtime instrumentation: simplify task exit handlingHeiko Carstens
Free data structures required for runtime instrumentation from arch_release_task_struct(). This allows to simplify the code a bit, and also makes the semantics a bit easier: arch_release_task_struct() is never called from the task that is being removed. In addition this allows to get rid of exit_thread() in a later patch. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-09-28s390: convert release_thread() into a static inline functionHeiko Carstens
release_thread() is an empty function that gets called on every task exit. Move the function to a header file and force inlining of it, so that the compiler can optimize it away instead of generating a pointless function call. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-06-28arch: remove unused macro/function thread_saved_pc()Tobias Klauser
The only user of thread_saved_pc() in non-arch-specific code was removed in commit 8243d5597793 ("sched/core: Remove pointless printout in sched_show_task()"). Remove the implementations as well. Some architectures use thread_saved_pc() in their arch-specific code. Leave their thread_saved_pc() intact. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-22s390: add a system call for guarded storageMartin Schwidefsky
This adds a new system call to enable the use of guarded storage for user space processes. The system call takes two arguments, a command and pointer to a guarded storage control block: s390_guarded_storage(int command, struct gs_cb *gs_cb); The second argument is relevant only for the GS_SET_BC_CB command. The commands in detail: 0 - GS_ENABLE Enable the guarded storage facility for the current task. The initial content of the guarded storage control block will be all zeros. After the enablement the user space code can use load-guarded-storage-controls instruction (LGSC) to load an arbitrary control block. While a task is enabled the kernel will save and restore the current content of the guarded storage registers on context switch. 1 - GS_DISABLE Disables the use of the guarded storage facility for the current task. The kernel will cease to save and restore the content of the guarded storage registers, the task specific content of these registers is lost. 2 - GS_SET_BC_CB Set a broadcast guarded storage control block. This is called per thread and stores a specific guarded storage control block in the task struct of the current task. This control block will be used for the broadcast event GS_BROADCAST. 3 - GS_CLEAR_BC_CB Clears the broadcast guarded storage control block. The guarded- storage control block is removed from the task struct that was established by GS_SET_BC_CB. 4 - GS_BROADCAST Sends a broadcast to all thread siblings of the current task. Every sibling that has established a broadcast guarded storage control block will load this control block and will be enabled for guarded storage. The broadcast guarded storage control block is used up, a second broadcast without a refresh of the stored control block with GS_SET_BC_CB will not have any effect. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-03-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: - four patches to get the new cputime code in shape for s390 - add the new statx system call - a few bug fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: wire up statx system call KVM: s390: Fix guest migration for huge guests resulting in panic s390/ipl: always use load normal for CCW-type re-IPL s390/timex: micro optimization for tod_to_ns s390/cputime: provide archicture specific cputime_to_nsecs s390/cputime: reset all accounting fields on fork s390/cputime: remove last traces of cputime_t s390: fix in-kernel program checks s390/crypt: fix missing unlock in ctr_paes_crypt on error path
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar
<linux/sched/task_stack.h> We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task_stack.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar
<linux/sched/task.h> We are going to split <linux/sched/task.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar
<linux/sched/debug.h> We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/debug.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-01s390/cputime: reset all accounting fields on forkMartin Schwidefsky
copy_thread has to reset all cputime related field in the task struct, not only user_timer and system_timer. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-23s390: opt into HAVE_COPY_THREAD_TLSHeiko Carstens
This the s390 version of commit c1bd55f922a2d ("x86: opt into HAVE_COPY_THREAD_TLS, for both 32-bit and 64-bit"). Simply use the tls system call argument instead of extracting the tls argument by magic from the pt_regs structure. See commit 3033f14ab78c3 ("clone: support passing tls argument via C rather than pt_regs magic") for more background. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-23s390: restore address space when returning to user spaceHeiko Carstens
Unbalanced set_fs usages (e.g. early exit from a function and a forgotten set_fs(USER_DS) call) may lead to a situation where the secondary asce is the kernel space asce when returning to user space. This would allow user space to modify kernel space at will. This would only be possible with the above mentioned kernel bug, however we can detect this and fix the secondary asce before returning to user space. Therefore a new TIF_ASCE_SECONDARY which is used within set_fs. When returning to user space check if TIF_ASCE_SECONDARY is set, which would indicate a bug. If it is set print a message to the console, fixup the secondary asce, and then return to user space. This is similar to what is being discussed for x86 and arm: "[RFC] syscalls: Restore address limit after a syscall". Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-02-17s390: kernel: Audit and remove any unnecessary uses of module.hPaul Gortmaker
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. The advantage in doing so is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each change instance for the presence of either and replace as needed. Build testing revealed some implicit header usage that was fixed up accordingly. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-11-11s390: move cputime accounting fields from thread_info to thread_structMartin Schwidefsky
The user_timer and system_timer fields are used for the per-thread cputime accounting code. The access to these values is simpler if they are moved to the thread_struct as the task_thread_info(tsk) indirection is not needed anymore. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-05-20exit_thread: accept a task parameter to be exitedJiri Slaby
We need to call exit_thread from copy_process in a fail path. So make it accept task_struct as a parameter. [v2] * s390: exit_thread_runtime_instr doesn't make sense to be called for non-current tasks. * arm: fix the comment in vfp_thread_copy * change 'me' to 'tsk' for task_struct * now we can change only archs that actually have exit_thread [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: "David S. Miller" <davem@davemloft.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Chris Zankel <chris@zankel.net> Cc: David Howells <dhowells@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Jonas Bonn <jonas@southpole.se> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mikael Starvik <starvik@axis.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@arm.linux.org.uk> Cc: Steven Miao <realmz6@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-10s390: add missing include statementsHeiko Carstens
arch_mmap_rnd, cpu_have_feature, and arch_randomize_brk are all defined as globally visible variables. However the files they are defined in do not include the header files with the declaration. To avoid a possible mismatch add the missing include statements so we have proper type checking in place. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-04-21s390/fpu: allocate 'struct fpu' with the task_structMartin Schwidefsky
Analog to git commit 0c8c0f03e3a292e031596484275c14cf39c0ab7a "x86/fpu, sched: Dynamically allocate 'struct fpu'" move the struct fpu to the end of the struct thread_struct, set CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and add the setup_task_size() function to calculate the correct size fo the task struct. For the performance_defconfig this increases the size of struct task_struct from 7424 bytes to 7936 bytes (MACHINE_HAS_VX==1) or 7552 bytes (MACHINE_HAS_VX==0). The dynamic allocation of the struct fpu is removed. The slab cache uses an 8KB block for the task struct in all cases, there is enough room for the struct fpu. For MACHINE_HAS_VX==1 each task now needs 512 bytes less memory. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-19s390: remove all usages of PSW_ADDR_INSNHeiko Carstens
Yet another leftover from the 31 bit era. The usual operation "y = x & PSW_ADDR_INSN" with the PSW_ADDR_INSN mask is a nop for CONFIG_64BIT. Therefore remove all usages and hope the code is a bit less confusing. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
2016-01-19s390: remove all usages of PSW_ADDR_AMODEHeiko Carstens
This is a leftover from the 31 bit area. For CONFIG_64BIT the usual operation "y = x | PSW_ADDR_AMODE" is a nop. Therefore remove all usages of PSW_ADDR_AMODE and make the code a bit less confusing. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>