summaryrefslogtreecommitdiff
path: root/arch/riscv
AgeCommit message (Collapse)Author
2023-11-05Merge patch series "Improve PTDUMP and introduce new fields"Palmer Dabbelt
Yu Chien Peter Lin <peterlin@andestech.com> says: This patchset enhances PTDUMP by providing additional information from pagetable entries. The first patch fixes the RSW field, while the second and third patches introduce the PBMT and NAPOT fields, respectively, for RV64 systems. * b4-shazam-merge: riscv: Introduce NAPOT field to PTDUMP riscv: Introduce PBMT field to PTDUMP riscv: Improve PTDUMP to show RSW with non-zero value Link: https://lore.kernel.org/r/20230921025022.3989723-1-peterlin@andestech.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05riscv: Introduce NAPOT field to PTDUMPYu Chien Peter Lin
This patch introduces the NAPOT field to PTDUMP, allowing it to display the letter "N" for pages that have the 63rd bit set. Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20230921025022.3989723-4-peterlin@andestech.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05riscv: Introduce PBMT field to PTDUMPYu Chien Peter Lin
This patch introduces the PBMT field to the PTDUMP, so it can display the memory attributes for NC or IO. Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20230921025022.3989723-3-peterlin@andestech.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05riscv: Improve PTDUMP to show RSW with non-zero valueYu Chien Peter Lin
RSW field can be used to encode 2 bits of software defined information. Currently, PTDUMP only prints "RSW" when its value is 1 or 3. To fix this issue and improve the debugging experience with PTDUMP, we redefine _PAGE_SPECIAL to its original value and use _PAGE_SOFT as the RSW mask, allow it to print the RSW with any non-zero value. This patch also removes the val from the struct prot_bits as it is no longer needed. Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20230921025022.3989723-2-peterlin@andestech.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05RISC-V: capitalise CMO op macrosConor Dooley
The CMO op macros initially used lower case, as the original iteration of the ALT_CMO_OP alternative stringified the first parameter to finalise the assembly for the standard variant. As a knock-on, the T-Head versions of these CMOs had to use mixed case defines. Commit dd23e9535889 ("RISC-V: replace cbom instructions with an insn-def") removed the asm construction with stringify, replacing it an insn-def macro, rending the lower-case surplus to requirements. As far as I can tell from a brief check, CBO_zero does not see similar use and didn't require the mixed case define in the first place. Replace the lower case characters now for consistency with other insn-def macros in the standard and T-Head forms, and adjust the callsites. Suggested-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Link: https://lore.kernel.org/r/20230915-aloe-dollar-994937477776@spud Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05riscv: don't probe unaligned access speed if already doneJisheng Zhang
If misaligned_access_speed percpu var isn't so called "HWPROBE MISALIGNED UNKNOWN", it means the probe has happened(this is possible for example, hotplug off then hotplug on one cpu), and the percpu var has been set, don't probe again in this case. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Fixes: 584ea6564bca ("RISC-V: Probe for unaligned access speed") Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230912154040.3306-1-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05riscv: defconfig : add CONFIG_MMC_DW for starfiveJinyu Tang
If these config not set, mmc can't run for jh7110, rootfs can't be found when using SD card. So set CONFIG_MMC_DW=y like arm64 defconfig, and set CONFIG_MMC_DW_STARFIVE=y for starfive. Then starfive vf2 board can start SD card rootfs with mainline defconfig and dtb. Signed-off-by: Jinyu Tang <tangjinyu@tinylab.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230912133128.5247-1-tangjinyu@tinylab.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05riscv: signal: handle syscall restart before get_signalHaorong Lu
In the current riscv implementation, blocking syscalls like read() may not correctly restart after being interrupted by ptrace. This problem arises when the syscall restart process in arch_do_signal_or_restart() is bypassed due to changes to the regs->cause register, such as an ebreak instruction. Steps to reproduce: 1. Interrupt the tracee process with PTRACE_SEIZE & PTRACE_INTERRUPT. 2. Backup original registers and instruction at new_pc. 3. Change pc to new_pc, and inject an instruction (like ebreak) to this address. 4. Resume with PTRACE_CONT and wait for the process to stop again after executing ebreak. 5. Restore original registers and instructions, and detach from the tracee process. 6. Now the read() syscall in tracee will return -1 with errno set to ERESTARTSYS. Specifically, during an interrupt, the regs->cause changes from EXC_SYSCALL to EXC_BREAKPOINT due to the injected ebreak, which is inaccessible via ptrace so we cannot restore it. This alteration breaks the syscall restart condition and ends the read() syscall with an ERESTARTSYS error. According to include/linux/errno.h, it should never be seen by user programs. X86 can avoid this issue as it checks the syscall condition using a register (orig_ax) exposed to user space. Arm64 handles syscall restart before calling get_signal, where it could be paused and inspected by ptrace/debugger. This patch adjusts the riscv implementation to arm64 style, which also checks syscall using a kernel register (syscallno). It ensures the syscall restart process is not bypassed when changes to the cause register occur, providing more consistent behavior across various architectures. For a simplified reproduction program, feel free to visit: https://github.com/ancientmodern/riscv-ptrace-bug-demo. Signed-off-by: Haorong Lu <ancientmodern4@gmail.com> Link: https://lore.kernel.org/r/20230803224458.4156006-1-ancientmodern4@gmail.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-05Merge patch series "Add support to handle misaligned accesses in S-mode"Palmer Dabbelt
Clément Léger <cleger@rivosinc.com> says: Since commit 61cadb9 ("Provide new description of misaligned load/store behavior compatible with privileged architecture.") in the RISC-V ISA manual, it is stated that misaligned load/store might not be supported. However, the RISC-V kernel uABI describes that misaligned accesses are supported. In order to support that, this series adds support for S-mode handling of misaligned accesses as well support for prctl(PR_UNALIGN). Handling misaligned access in kernel allows for a finer grain control of the misaligned accesses behavior, and thanks to the prctl() call, can allow disabling misaligned access emulation to generate SIGBUS. User space can then optimize its software by removing such access based on SIGBUS generation. This series is useful when using a SBI implementation that does not handle misaligned traps as well as detecting misaligned accesses generated by userspace application using the prctrl(PR_SET_UNALIGN) feature. This series can be tested using the spike simulator[1] and a modified openSBI version[2] which allows to always delegate misaligned load/store to S-mode. A test[3] that exercise various instructions/registers can be executed to verify the unaligned access support. [1] https://github.com/riscv-software-src/riscv-isa-sim [2] https://github.com/rivosinc/opensbi/tree/dev/cleger/no_misaligned [3] https://github.com/clementleger/unaligned_test * b4-shazam-merge: riscv: add support for PR_SET_UNALIGN and PR_GET_UNALIGN riscv: report misaligned accesses emulation to hwprobe riscv: annotate check_unaligned_access_boot_cpu() with __init riscv: add support for sysctl unaligned_enabled control riscv: add floating point insn support to misaligned access emulation riscv: report perf event for misaligned fault riscv: add support for misaligned trap handling in S-mode riscv: remove unused functions in traps_misaligned.c Link: https://lore.kernel.org/r/20231004151405.521596-1-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-04Merge tag 'kbuild-v6.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Implement the binary search in modpost for faster symbol lookup - Respect HOSTCC when linking host programs written in Rust - Change the binrpm-pkg target to generate kernel-devel RPM package - Fix endianness issues for tee and ishtp MODULE_DEVICE_TABLE - Unify vdso_install rules - Remove unused __memexit* annotations - Eliminate stale whitelisting for __devinit/__devexit from modpost - Enable dummy-tools to handle the -fpatchable-function-entry flag - Add 'userldlibs' syntax * tag 'kbuild-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits) kbuild: support 'userldlibs' syntax kbuild: dummy-tools: pretend we understand -fpatchable-function-entry kbuild: Correct missing architecture-specific hyphens modpost: squash ALL_{INIT,EXIT}_TEXT_SECTIONS to ALL_TEXT_SECTIONS modpost: merge sectioncheck table entries regarding init/exit sections modpost: use ALL_INIT_SECTIONS for the section check from DATA_SECTIONS modpost: disallow the combination of EXPORT_SYMBOL and __meminit* modpost: remove EXIT_SECTIONS macro modpost: remove MEM_INIT_SECTIONS macro modpost: remove more symbol patterns from the section check whitelist modpost: disallow *driver to reference .meminit* sections linux/init: remove __memexit* annotations modpost: remove ALL_EXIT_DATA_SECTIONS macro kbuild: simplify cmd_ld_multi_m kbuild: avoid too many execution of scripts/pahole-flags.sh kbuild: remove ARCH_POSTLINK from module builds kbuild: unify no-compiler-targets and no-sync-config-targets kbuild: unify vdso_install rules docs: kbuild: add INSTALL_DTBS_PATH UML: remove unused cmd_vdso_install ...
2023-11-03Merge tag 'tty-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial updates from Greg KH: "Here is the big set of tty/serial driver changes for 6.7-rc1. Included in here are: - console/vgacon cleanups and removals from Arnd - tty core and n_tty cleanups from Jiri - lots of 8250 driver updates and cleanups - sc16is7xx serial driver updates - dt binding updates - first set of port lock wrapers from Thomas for the printk fixes coming in future releases - other small serial and tty core cleanups and updates All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits) serdev: Replace custom code with device_match_acpi_handle() serdev: Simplify devm_serdev_device_open() function serdev: Make use of device_set_node() tty: n_gsm: add copyright Siemens Mobility GmbH tty: n_gsm: fix race condition in status line change on dead connections serial: core: Fix runtime PM handling for pending tx vgacon: fix mips/sibyte build regression dt-bindings: serial: drop unsupported samsung bindings tty: serial: samsung: drop earlycon support for unsupported platforms tty: 8250: Add note for PX-835 tty: 8250: Fix IS-200 PCI ID comment tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks tty: 8250: Add support for Intashield IX cards tty: 8250: Add support for additional Brainboxes PX cards tty: 8250: Fix up PX-803/PX-857 tty: 8250: Fix port count of PX-257 tty: 8250: Add support for Intashield IS-100 tty: 8250: Add support for Brainboxes UP cards tty: 8250: Add support for additional Brainboxes UC cards tty: 8250: Remove UC-257 and UC-431 ...
2023-11-02Merge tag 'mm-nonmm-stable-2023-11-02-14-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: "As usual, lots of singleton and doubleton patches all over the tree and there's little I can say which isn't in the individual changelogs. The lengthier patch series are - 'kdump: use generic functions to simplify crashkernel reservation in arch', from Baoquan He. This is mainly cleanups and consolidation of the 'crashkernel=' kernel parameter handling - After much discussion, David Laight's 'minmax: Relax type checks in min() and max()' is here. Hopefully reduces some typecasting and the use of min_t() and max_t() - A group of patches from Oleg Nesterov which clean up and slightly fix our handling of reads from /proc/PID/task/... and which remove task_struct.thread_group" * tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits) scripts/gdb/vmalloc: disable on no-MMU scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n .mailmap: add address mapping for Tomeu Vizoso mailmap: update email address for Claudiu Beznea tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions .mailmap: map Benjamin Poirier's address scripts/gdb: add lx_current support for riscv ocfs2: fix a spelling typo in comment proc: test ProtectionKey in proc-empty-vm test proc: fix proc-empty-vm test with vsyscall fs/proc/base.c: remove unneeded semicolon do_io_accounting: use sig->stats_lock do_io_accounting: use __for_each_thread() ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error() ocfs2: fix a typo in a comment scripts/show_delta: add __main__ judgement before main code treewide: mark stuff as __ro_after_init fs: ocfs2: check status values proc: test /proc/${pid}/statm compiler.h: move __is_constexpr() to compiler.h ...
2023-11-02Merge tag 'mm-stable-2023-11-01-14-33' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "Many singleton patches against the MM code. The patch series which are included in this merge do the following: - Kemeng Shi has contributed some compation maintenance work in the series 'Fixes and cleanups to compaction' - Joel Fernandes has a patchset ('Optimize mremap during mutual alignment within PMD') which fixes an obscure issue with mremap()'s pagetable handling during a subsequent exec(), based upon an implementation which Linus suggested - More DAMON/DAMOS maintenance and feature work from SeongJae Park i the following patch series: mm/damon: misc fixups for documents, comments and its tracepoint mm/damon: add a tracepoint for damos apply target regions mm/damon: provide pseudo-moving sum based access rate mm/damon: implement DAMOS apply intervals mm/damon/core-test: Fix memory leaks in core-test mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval - In the series 'Do not try to access unaccepted memory' Adrian Hunter provides some fixups for the recently-added 'unaccepted memory' feature. To increase the feature's checking coverage. 'Plug a few gaps where RAM is exposed without checking if it is unaccepted memory' - In the series 'cleanups for lockless slab shrink' Qi Zheng has done some maintenance work which is preparation for the lockless slab shrinking code - Qi Zheng has redone the earlier (and reverted) attempt to make slab shrinking lockless in the series 'use refcount+RCU method to implement lockless slab shrink' - David Hildenbrand contributes some maintenance work for the rmap code in the series 'Anon rmap cleanups' - Kefeng Wang does more folio conversions and some maintenance work in the migration code. Series 'mm: migrate: more folio conversion and unification' - Matthew Wilcox has fixed an issue in the buffer_head code which was causing long stalls under some heavy memory/IO loads. Some cleanups were added on the way. Series 'Add and use bdev_getblk()' - In the series 'Use nth_page() in place of direct struct page manipulation' Zi Yan has fixed a potential issue with the direct manipulation of hugetlb page frames - In the series 'mm: hugetlb: Skip initialization of gigantic tail struct pages if freed by HVO' has improved our handling of gigantic pages in the hugetlb vmmemmep optimizaton code. This provides significant boot time improvements when significant amounts of gigantic pages are in use - Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code rationalization and folio conversions in the hugetlb code - Yin Fengwei has improved mlock()'s handling of large folios in the series 'support large folio for mlock' - In the series 'Expose swapcache stat for memcg v1' Liu Shixin has added statistics for memcg v1 users which are available (and useful) under memcg v2 - Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable) prctl so that userspace may direct the kernel to not automatically propagate the denial to child processes. The series is named 'MDWE without inheritance' - Kefeng Wang has provided the series 'mm: convert numa balancing functions to use a folio' which does what it says - In the series 'mm/ksm: add fork-exec support for prctl' Stefan Roesch makes is possible for a process to propagate KSM treatment across exec() - Huang Ying has enhanced memory tiering's calculation of memory distances. This is used to permit the dax/kmem driver to use 'high bandwidth memory' in addition to Optane Data Center Persistent Memory Modules (DCPMM). The series is named 'memory tiering: calculate abstract distance based on ACPI HMAT' - In the series 'Smart scanning mode for KSM' Stefan Roesch has optimized KSM by teaching it to retain and use some historical information from previous scans - Yosry Ahmed has fixed some inconsistencies in memcg statistics in the series 'mm: memcg: fix tracking of pending stats updates values' - In the series 'Implement IOCTL to get and optionally clear info about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap which permits us to atomically read-then-clear page softdirty state. This is mainly used by CRIU - Hugh Dickins contributed the series 'shmem,tmpfs: general maintenance', a bunch of relatively minor maintenance tweaks to this code - Matthew Wilcox has increased the use of the VMA lock over file-backed page faults in the series 'Handle more faults under the VMA lock'. Some rationalizations of the fault path became possible as a result - In the series 'mm/rmap: convert page_move_anon_rmap() to folio_move_anon_rmap()' David Hildenbrand has implemented some cleanups and folio conversions - In the series 'various improvements to the GUP interface' Lorenzo Stoakes has simplified and improved the GUP interface with an eye to providing groundwork for future improvements - Andrey Konovalov has sent along the series 'kasan: assorted fixes and improvements' which does those things - Some page allocator maintenance work from Kemeng Shi in the series 'Two minor cleanups to break_down_buddy_pages' - In thes series 'New selftest for mm' Breno Leitao has developed another MM self test which tickles a race we had between madvise() and page faults - In the series 'Add folio_end_read' Matthew Wilcox provides cleanups and an optimization to the core pagecache code - Nhat Pham has added memcg accounting for hugetlb memory in the series 'hugetlb memcg accounting' - Cleanups and rationalizations to the pagemap code from Lorenzo Stoakes, in the series 'Abstract vma_merge() and split_vma()' - Audra Mitchell has fixed issues in the procfs page_owner code's new timestamping feature which was causing some misbehaviours. In the series 'Fix page_owner's use of free timestamps' - Lorenzo Stoakes has fixed the handling of new mappings of sealed files in the series 'permit write-sealed memfd read-only shared mappings' - Mike Kravetz has optimized the hugetlb vmemmap optimization in the series 'Batch hugetlb vmemmap modification operations' - Some buffer_head folio conversions and cleanups from Matthew Wilcox in the series 'Finish the create_empty_buffers() transition' - As a page allocator performance optimization Huang Ying has added automatic tuning to the allocator's per-cpu-pages feature, in the series 'mm: PCP high auto-tuning' - Roman Gushchin has contributed the patchset 'mm: improve performance of accounted kernel memory allocations' which improves their performance by ~30% as measured by a micro-benchmark - folio conversions from Kefeng Wang in the series 'mm: convert page cpupid functions to folios' - Some kmemleak fixups in Liu Shixin's series 'Some bugfix about kmemleak' - Qi Zheng has improved our handling of memoryless nodes by keeping them off the allocation fallback list. This is done in the series 'handle memoryless nodes more appropriately' - khugepaged conversions from Vishal Moola in the series 'Some khugepaged folio conversions'" [ bcachefs conflicts with the dynamically allocated shrinkers have been resolved as per Stephen Rothwell in https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/ with help from Qi Zheng. The clone3 test filtering conflict was half-arsed by yours truly ] * tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits) mm/damon/sysfs: update monitoring target regions for online input commit mm/damon/sysfs: remove requested targets when online-commit inputs selftests: add a sanity check for zswap Documentation: maple_tree: fix word spelling error mm/vmalloc: fix the unchecked dereference warning in vread_iter() zswap: export compression failure stats Documentation: ubsan: drop "the" from article title mempolicy: migration attempt to match interleave nodes mempolicy: mmap_lock is not needed while migrating folios mempolicy: alloc_pages_mpol() for NUMA policy without vma mm: add page_rmappable_folio() wrapper mempolicy: remove confusing MPOL_MF_LAZY dead code mempolicy: mpol_shared_policy_init() without pseudo-vma mempolicy trivia: use pgoff_t in shared mempolicy tree mempolicy trivia: slightly more consistent naming mempolicy trivia: delete those ancient pr_debug()s mempolicy: fix migrate_pages(2) syscall return nr_failed kernfs: drop shared NUMA mempolicy hooks hugetlbfs: drop shared NUMA mempolicy pretence mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets() ...
2023-11-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm updates from Paolo Bonzini: "ARM: - Generalized infrastructure for 'writable' ID registers, effectively allowing userspace to opt-out of certain vCPU features for its guest - Optimization for vSGI injection, opportunistically compressing MPIDR to vCPU mapping into a table - Improvements to KVM's PMU emulation, allowing userspace to select the number of PMCs available to a VM - Guest support for memory operation instructions (FEAT_MOPS) - Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing bugs and getting rid of useless code - Changes to the way the SMCCC filter is constructed, avoiding wasted memory allocations when not in use - Load the stage-2 MMU context at vcpu_load() for VHE systems, reducing the overhead of errata mitigations - Miscellaneous kernel and selftest fixes LoongArch: - New architecture for kvm. The hardware uses the same model as x86, s390 and RISC-V, where guest/host mode is orthogonal to supervisor/user mode. The virtualization extensions are very similar to MIPS, therefore the code also has some similarities but it's been cleaned up to avoid some of the historical bogosities that are found in arch/mips. The kernel emulates MMU, timer and CSR accesses, while interrupt controllers are only emulated in userspace, at least for now. RISC-V: - Support for the Smstateen and Zicond extensions - Support for virtualizing senvcfg - Support for virtualized SBI debug console (DBCN) S390: - Nested page table management can be monitored through tracepoints and statistics x86: - Fix incorrect handling of VMX posted interrupt descriptor in KVM_SET_LAPIC, which could result in a dropped timer IRQ - Avoid WARN on systems with Intel IPI virtualization - Add CONFIG_KVM_MAX_NR_VCPUS, to allow supporting up to 4096 vCPUs without forcing more common use cases to eat the extra memory overhead. - Add virtualization support for AMD SRSO mitigation (IBPB_BRTYPE and SBPB, aka Selective Branch Predictor Barrier). - Fix a bug where restoring a vCPU snapshot that was taken within 1 second of creating the original vCPU would cause KVM to try to synchronize the vCPU's TSC and thus clobber the correct TSC being set by userspace. - Compute guest wall clock using a single TSC read to avoid generating an inaccurate time, e.g. if the vCPU is preempted between multiple TSC reads. - "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which complain about a "Firmware Bug" if the bit isn't set for select F/M/S combos. Likewise "virtualize" (ignore) MSR_AMD64_TW_CFG to appease Windows Server 2022. - Don't apply side effects to Hyper-V's synthetic timer on writes from userspace to fix an issue where the auto-enable behavior can trigger spurious interrupts, i.e. do auto-enabling only for guest writes. - Remove an unnecessary kick of all vCPUs when synchronizing the dirty log without PML enabled. - Advertise "support" for non-serializing FS/GS base MSR writes as appropriate. - Harden the fast page fault path to guard against encountering an invalid root when walking SPTEs. - Omit "struct kvm_vcpu_xen" entirely when CONFIG_KVM_XEN=n. - Use the fast path directly from the timer callback when delivering Xen timer events, instead of waiting for the next iteration of the run loop. This was not done so far because previously proposed code had races, but now care is taken to stop the hrtimer at critical points such as restarting the timer or saving the timer information for userspace. - Follow the lead of upstream Xen and ignore the VCPU_SSHOTTMR_future flag. - Optimize injection of PMU interrupts that are simultaneous with NMIs. - Usual handful of fixes for typos and other warts. x86 - MTRR/PAT fixes and optimizations: - Clean up code that deals with honoring guest MTRRs when the VM has non-coherent DMA and host MTRRs are ignored, i.e. EPT is enabled. - Zap EPT entries when non-coherent DMA assignment stops/start to prevent using stale entries with the wrong memtype. - Don't ignore guest PAT for CR0.CD=1 && KVM_X86_QUIRK_CD_NW_CLEARED=y This was done as a workaround for virtual machine BIOSes that did not bother to clear CR0.CD (because ancient KVM/QEMU did not bother to set it, in turn), and there's zero reason to extend the quirk to also ignore guest PAT. x86 - SEV fixes: - Report KVM_EXIT_SHUTDOWN instead of EINVAL if KVM intercepts SHUTDOWN while running an SEV-ES guest. - Clean up the recognition of emulation failures on SEV guests, when KVM would like to "skip" the instruction but it had already been partially emulated. This makes it possible to drop a hack that second guessed the (insufficient) information provided by the emulator, and just do the right thing. Documentation: - Various updates and fixes, mostly for x86 - MTRR and PAT fixes and optimizations" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (164 commits) KVM: selftests: Avoid using forced target for generating arm64 headers tools headers arm64: Fix references to top srcdir in Makefile KVM: arm64: Add tracepoint for MMIO accesses where ISV==0 KVM: arm64: selftest: Perform ISB before reading PAR_EL1 KVM: arm64: selftest: Add the missing .guest_prepare() KVM: arm64: Always invalidate TLB for stage-2 permission faults KVM: x86: Service NMI requests after PMI requests in VM-Enter path KVM: arm64: Handle AArch32 SPSR_{irq,abt,und,fiq} as RAZ/WI KVM: arm64: Do not let a L1 hypervisor access the *32_EL2 sysregs KVM: arm64: Refine _EL2 system register list that require trap reinjection arm64: Add missing _EL2 encodings arm64: Add missing _EL12 encodings KVM: selftests: aarch64: vPMU test for validating user accesses KVM: selftests: aarch64: vPMU register test for unimplemented counters KVM: selftests: aarch64: vPMU register test for implemented counters KVM: selftests: aarch64: Introduce vpmu_counter_access test tools: Import arm_pmuv3.h KVM: arm64: PMU: Allow userspace to limit PMCR_EL0.N for the guest KVM: arm64: Sanitize PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR} before first run KVM: arm64: Add {get,set}_user for PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR} ...
2023-11-02RISC-V: hwprobe: Fix vDSO SIGSEGVAndrew Jones
A hwprobe pair key is signed, but the hwprobe vDSO function was only checking that the upper bound was valid. In order to help avoid this type of problem in the future, and in anticipation of this check becoming more complicated with sparse keys, introduce and use a "key is valid" predicate function for the check. Fixes: aa5af0aa90ba ("RISC-V: Add hwprobe vDSO function and data") Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Evan Green <evan@rivosinc.com> Link: https://lore.kernel.org/r/20231010165101.14942-2-ajones@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-02riscv: configs: defconfig: Enable configs required for RZ/Five SoCLad Prabhakar
Enable the configs required by the below IP blocks which are present on RZ/Five SoC: * ADC * CANFD * DMAC * eMMC/SDHI * OSTM * RAVB (+ Micrel PHY) * RIIC * RSPI * SSI (Sound+WM8978 codec) * Thermal * USB (PHY/RESET/OTG) Along with the above some core configs are enabled too, -> CPU frequency scaling as RZ/Five does support this. -> MTD is enabled as RSPI can be connected to flash chips -> Enabled I2C chardev so that it enables userspace to read/write i2c devices (similar to arm64) -> Thermal configs as RZ/Five SoC does have thermal unit -> GPIO regulator as we might have IP blocks for which voltage levels are controlled by GPIOs -> OTG configs as RZ/Five USB can support host/function -> Gadget configs so that we can test USB function (as done in arm64 all the gadget configs are enabled) Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230929000704.53217-6-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-02Merge patch series "riscv: SCS support"Palmer Dabbelt
Sami Tolvanen <samitolvanen@google.com> says: This series adds Shadow Call Stack (SCS) support for RISC-V. SCS uses compiler instrumentation to store return addresses in a separate shadow stack to protect them against accidental or malicious overwrites. More information about SCS can be found here: https://clang.llvm.org/docs/ShadowCallStack.html Patch 1 is from Deepak, and it simplifies VMAP_STACK overflow handling by adding support for accessing per-CPU variables directly in assembly. The patch is included in this series to make IRQ stack switching cleaner with SCS, and I've simply rebased it and fixed a couple of minor issues. Patch 2 uses this functionality to clean up the stack switching by moving duplicate code into a single function. On RISC-V, the compiler uses the gp register for storing the current shadow call stack pointer, which is incompatible with global pointer relaxation. Patch 3 moves global pointer loading into a macro that can be easily disabled with SCS. Patch 4 implements SCS register loading and switching, and allows the feature to be enabled, and patch 5 adds separate per-CPU IRQ shadow call stacks when CONFIG_IRQ_STACKS is enabled. Patch 6 fixes the backward-edge CFI test in lkdtm for RISC-V. Note that this series requires Clang 17. Earlier Clang versions support SCS on RISC-V, but use the x18 register instead of gp, which isn't ideal. gcc has SCS support for arm64, but I'm not aware of plans to support RISC-V. Once the Zicfiss extension is ratified, it's probably preferable to use hardware-backed shadow stacks instead of SCS on hardware that supports the extension, and we may want to consider implementing CONFIG_DYNAMIC_SCS to patch between the implementation at runtime (similarly to the arm64 implementation, which switches to SCS when hardware PAC support isn't available). * b4-shazam-merge: lkdtm: Fix CFI_BACKWARD on RISC-V riscv: Use separate IRQ shadow call stacks riscv: Implement Shadow Call Stack riscv: Move global pointer loading to a macro riscv: Deduplicate IRQ stack switching riscv: VMAP_STACK overflow detection thread-safe Link: https://lore.kernel.org/r/20230927224757.1154247-8-samitolvanen@google.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-02Merge patch "riscv: errata: improve T-Head CMO"Palmer Dabbelt
This fixes an encoding issue with T-Head's dcache.cva and fixes the comment about the T-Head encodings. The first of these was a fix and got picked up earlier, I'm merging the second on top of it as they touch the same comment. * b4-shazam-merge: riscv: errata: prefix T-Head mnemonics with th. riscv: errata: fix T-Head dcache.cva encoding Link: https://lore.kernel.org/r/20230827090813.1353-1-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-02riscv: errata: prefix T-Head mnemonics with th.Icenowy Zheng
T-Head now maintains some specification for their extended instructions at [1], in which all instructions are prefixed "th.". Follow this practice in the kernel comments. Link: https://github.com/T-head-Semi/thead-extension-spec [1] Signed-off-by: Icenowy Zheng <uwu@icenowy.me> Reviewed-by: Guo Ren <guoren@kernel.org> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-01Merge tag 'sysctl-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull sysctl updates from Luis Chamberlain: "To help make the move of sysctls out of kernel/sysctl.c not incur a size penalty sysctl has been changed to allow us to not require the sentinel, the final empty element on the sysctl array. Joel Granados has been doing all this work. On the v6.6 kernel we got the major infrastructure changes required to support this. For v6.7-rc1 we have all arch/ and drivers/ modified to remove the sentinel. Both arch and driver changes have been on linux-next for a bit less than a month. It is worth re-iterating the value: - this helps reduce the overall build time size of the kernel and run time memory consumed by the kernel by about ~64 bytes per array - the extra 64-byte penalty is no longer inncurred now when we move sysctls out from kernel/sysctl.c to their own files For v6.8-rc1 expect removal of all the sentinels and also then the unneeded check for procname == NULL. The last two patches are fixes recently merged by Krister Johansen which allow us again to use softlockup_panic early on boot. This used to work but the alias work broke it. This is useful for folks who want to detect softlockups super early rather than wait and spend money on cloud solutions with nothing but an eventual hung kernel. Although this hadn't gone through linux-next it's also a stable fix, so we might as well roll through the fixes now" * tag 'sysctl-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (23 commits) watchdog: move softlockup_panic back to early_param proc: sysctl: prevent aliased sysctls from getting passed to init intel drm: Remove now superfluous sentinel element from ctl_table array Drivers: hv: Remove now superfluous sentinel element from ctl_table array raid: Remove now superfluous sentinel element from ctl_table array fw loader: Remove the now superfluous sentinel element from ctl_table array sgi-xp: Remove the now superfluous sentinel element from ctl_table array vrf: Remove the now superfluous sentinel element from ctl_table array char-misc: Remove the now superfluous sentinel element from ctl_table array infiniband: Remove the now superfluous sentinel element from ctl_table array macintosh: Remove the now superfluous sentinel element from ctl_table array parport: Remove the now superfluous sentinel element from ctl_table array scsi: Remove now superfluous sentinel element from ctl_table array tty: Remove now superfluous sentinel element from ctl_table array xen: Remove now superfluous sentinel element from ctl_table array hpet: Remove now superfluous sentinel element from ctl_table array c-sky: Remove now superfluous sentinel element from ctl_talbe array powerpc: Remove now superfluous sentinel element from ctl_table arrays riscv: Remove now superfluous sentinel element from ctl_table array x86/vdso: Remove now superfluous sentinel element from ctl_table array ...
2023-11-01Merge tag 'docs-6.7' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation updates from Jonathan Corbet: "The number of commits for documentation is not huge this time around, but there are some significant changes nonetheless: - Some more Spanish-language and Chinese translations - The much-discussed documentation of the confidential-computing threat model - Powerpc and RISCV documentation move under Documentation/arch - these complete this particular bit of documentation churn - A large traditional-Chinese documentation update - A new document on backporting and conflict resolution - Some kernel-doc and Sphinx fixes Plus the usual smattering of smaller updates and typo fixes" * tag 'docs-6.7' of git://git.lwn.net/linux: (40 commits) scripts/kernel-doc: Fix the regex for matching -Werror flag docs: backporting: address feedback Documentation: driver-api: pps: Update PPS generator documentation speakup: Document USB support doc: blk-ioprio: Bring the doc in line with the implementation docs: usb: fix reference to nonexistent file in UVC Gadget docs: doc-guide: mention 'make refcheckdocs' Documentation: fix typo in dynamic-debug howto scripts/kernel-doc: match -Werror flag strictly Documentation/sphinx: Remove the repeated word "the" in comments. docs: sparse: add SPDX-License-Identifier docs/zh_CN: Add subsystem-apis Chinese translation docs/zh_TW: update contents for zh_TW docs: submitting-patches: encourage direct notifications to commenters docs: add backporting and conflict resolution document docs: move riscv under arch docs: update link to powerpc/vmemmap_dedup.rst mm/memory-hotplug: fix typo in documentation docs: move powerpc under arch PCI: Update the devres documentation regarding to pcim_*() ...
2023-11-01Merge tag 'soc-drivers-6.7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "The highlights for the driver support this time are - Qualcomm platforms gain support for the Qualcomm Secure Execution Environment firmware interface to access EFI variables on certain devices, and new features for multiple platform and firmware drivers. - Arm FF-A firmware support gains support for v1.1 specification features, in particular notification and memory transaction descriptor changes. - SCMI firmware support now support v3.2 features for clock and DVFS configuration and a new transport for Qualcomm platforms. - Minor cleanups and bugfixes are added to pretty much all the active platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive, amlogic, atmel, tegra, aspeed, vexpress, mediatek, samsung and more. In particular, this contains portions of the treewide conversion to use __counted_by annotations and the device_get_match_data helper" * tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (156 commits) soc: qcom: pmic_glink_altmode: Print return value on error firmware: qcom: scm: remove unneeded 'extern' specifiers firmware: qcom: scm: add a missing forward declaration for struct device firmware: qcom: move Qualcomm code into its own directory soc: samsung: exynos-chipid: Convert to platform remove callback returning void soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size() soc: qcom: pmic_glink: fix connector type to be DisplayPort soc: ti: k3-socinfo: Avoid overriding return value soc: ti: k3-socinfo: Fix typo in bitfield documentation soc: ti: knav_qmss_queue: Use device_get_match_data() firmware: ti_sci: Use device_get_match_data() firmware: qcom: qseecom: add missing include guards soc/pxa: ssp: Convert to platform remove callback returning void soc/mediatek: mtk-mmsys: Convert to platform remove callback returning void soc/mediatek: mtk-devapc: Convert to platform remove callback returning void soc/loongson: loongson2_guts: Convert to platform remove callback returning void soc/litex: litex_soc_ctrl: Convert to platform remove callback returning void soc/ixp4xx: ixp4xx-qmgr: Convert to platform remove callback returning void soc/ixp4xx: ixp4xx-npe: Convert to platform remove callback returning void soc/hisilicon: kunpeng_hccs: Convert to platform remove callback returning void ...
2023-11-01Merge tag 'soc-dt-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull SoC DT updates from Arnd Bergmann: "There are a couple new SoCs that are supported for the first time: - AMD Pensando Elba is a data processing unit based on Cortex-A72 CPU cores - Sophgo makes RISC-V based chips, and we now support the CV1800B chip used in the milkv-duo board and the massive sg2042 chip in the milkv-pioneer, a 64-core developer workstation. - Qualcomm Snapdragon 720G (sm7125) is a close relative of Snapdragon 7c and gets added with some Xiaomi phones - Renesas gains support for the R8A779F4 (R-Car S4-8) automotive SoC and the RZ/G3S (R9A08G045) embedded SoC. There are also a bunch of newly supported machines that use already supported chips. On the 32-bit side, we have: - USRobotics USR8200 is a NAS/Firewall/router based on the ancient Intel IXP4xx platform - A couple of machines based on the NXP i.MX5 and i.MX6 platforms - One machine each for Allwinner V3s, Aspeed AST2600, Microchip sama5d29 and ST STM32mp157 The other ones all use arm64 cores on chips from allwinner, amlogic, freescale, mediatek, qualcomm and rockchip" * tag 'soc-dt-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (641 commits) ARM: dts: BCM5301X: Set switch ports for Linksys EA9200 ARM: dts: BCM5301X: Set fixed-link for extra Netgear R8000 CPU ports ARM: dts: BCM5301X: Explicitly disable unused switch CPU ports ARM: dts: BCM5301X: Relicense Vivek's code to the GPL 2.0+ / MIT ARM: dts: BCM5301X: Relicense Felix's code to the GPL 2.0+ / MIT ARM: dts: BCM5301X: Set MAC address for Asus RT-AC87U arm64: dts: socionext: add missing cache properties riscv: dts: thead: convert isa detection to new properties arm64: dts: Update cache properties for socionext arm64: dts: ti: k3-am654-idk: Add ICSSG Ethernet ports arm64: dts: ti: k3-am654-icssg2: add ICSSG2 Ethernet support arm64: dts: ti: k3-am65-main: Add ICSSG IEP nodes arm64: dts: ti: k3-am62p5-sk: Updates for SK EVM arm64: dts: ti: k3-am62p: Add nodes for more IPs arm64: dts: rockchip: Add Turing RK1 SoM support dt-bindings: arm: rockchip: Add Turing RK1 dt-bindings: vendor-prefixes: add turing arm64: dts: rockchip: Add DFI to rk3588s arm64: dts: rockchip: Add DFI to rk356x arm64: dts: rockchip: Always enable DFI on rk3399 ...
2023-11-01riscv: add support for PR_SET_UNALIGN and PR_GET_UNALIGNClément Léger
Now that trap support is ready to handle misalignment errors in S-mode, allow the user to control the behavior of misaligned accesses using prctl(PR_SET_UNALIGN). Add an align_ctl flag in thread_struct which will be used to determine if we should SIGBUS the process or not on such fault. Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20231004151405.521596-9-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-01riscv: report misaligned accesses emulation to hwprobeClément Léger
hwprobe provides a way to report if misaligned access are emulated. In order to correctly populate that feature, we can check if it actually traps when doing a misaligned access. This can be checked using an exception table entry which will actually be used when a misaligned access is done from kernel mode. Signed-off-by: Clément Léger <cleger@rivosinc.com> Link: https://lore.kernel.org/r/20231004151405.521596-8-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-01riscv: annotate check_unaligned_access_boot_cpu() with __initClément Léger
This function is solely called as an initcall, thus annotate it with __init. Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Evan Green <evan@rivosinc.com> Link: https://lore.kernel.org/r/20231004151405.521596-7-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-01riscv: add support for sysctl unaligned_enabled controlClément Léger
This sysctl tuning option allows the user to disable misaligned access handling globally on the system. This will also be used by misaligned detection code to temporarily disable misaligned access handling. Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20231004151405.521596-6-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-01riscv: add floating point insn support to misaligned access emulationClément Léger
This support is partially based of openSBI misaligned emulation floating point instruction support. It provides support for the existing floating point instructions (both for 32/64 bits as well as compressed ones). Since floating point registers are not part of the pt_regs struct, we need to modify them directly using some assembly. We also dirty the pt_regs status in case we modify them to be sure context switch will save FP state. With this support, Linux is on par with openSBI support. Signed-off-by: Clément Léger <cleger@rivosinc.com> Link: https://lore.kernel.org/r/20231004151405.521596-5-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-01riscv: report perf event for misaligned faultClément Léger
Add missing calls to account for misaligned fault event using perf_sw_event(). Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20231004151405.521596-4-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-01riscv: add support for misaligned trap handling in S-modeClément Léger
Misalignment trap handling is only supported for M-mode and uses direct accesses to user memory. In S-mode, when handling usermode fault, this requires to use the get_user()/put_user() accessors. Implement load_u8(), store_u8() and get_insn() using these accessors for userspace and direct text access for kernel. Signed-off-by: Clément Léger <cleger@rivosinc.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20231004151405.521596-3-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-11-01riscv: remove unused functions in traps_misaligned.cClément Léger
Replace macros by the only two function calls that are done from this file, store_u8() and load_u8(). Signed-off-by: Clément Léger <cleger@rivosinc.com> Link: https://lore.kernel.org/r/20231004151405.521596-2-cleger@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-10-31Merge patch series "RISC-V: ACPI improvements"Palmer Dabbelt
Sunil V L <sunilvl@ventanamicro.com> says: This series is a set of patches which were originally part of RFC v1 series [1] to add ACPI support in RISC-V interrupt controllers. Since these patches are independent of the interrupt controllers, creating this new series which helps to merge instead of waiting for big series. This set of patches primarily adds support below ECR [2] which is approved by the ASWG and adds below features. - Get CBO block sizes from RHCT on ACPI based systems. Additionally, the series contains a patch to improve acpi_os_ioremap(). [1] - https://lore.kernel.org/lkml/20230803175202.3173957-1-sunilvl@ventanamicro.com/ [2] - https://drive.google.com/file/d/1sKbOa8m1UZw1JkquZYe3F1zQBN1xXsaf/view?usp=sharing * b4-shazam-merge: RISC-V: cacheflush: Initialize CBO variables on ACPI systems RISC-V: ACPI: RHCT: Add function to get CBO block sizes RISC-V: ACPI: Update the return value of acpi_get_rhct() RISC-V: ACPI: Enhance acpi_os_ioremap with MMIO remapping Link: https://lore.kernel.org/r/20231018124007.1306159-1-sunilvl@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-10-31riscv: put interrupt entries into .irqentry.textNam Cao
The interrupt entries are expected to be in the .irqentry.text section. For example, for kprobes to work properly, exception code cannot be probed; this is ensured by blacklisting addresses in the .irqentry.text section. Fixes: 7db91e57a0ac ("RISC-V: Task implementation") Signed-off-by: Nam Cao <namcaov@gmail.com> Link: https://lore.kernel.org/r/20230821145708.21270-1-namcaov@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-10-31riscv: mm: Update the comment of CONFIG_PAGE_OFFSETSong Shuai
Since the commit 011f09d12052 set sv57 as default for CONFIG_64BIT, the comment of CONFIG_PAGE_OFFSET should be updated too. Fixes: 011f09d12052 ("riscv: mm: Set sv57 on defaultly") Signed-off-by: Song Shuai <suagrfillet@gmail.com> Link: https://lore.kernel.org/r/20230809031023.3575407-1-songshuaishuai@tinylab.org Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-10-31riscv: Using TOOLCHAIN_HAS_ZIHINTPAUSE marco replace zihintpauseMinda Chen
Actually it is a part of Conor's commit aae538cd03bc ("riscv: fix detection of toolchain Zihintpause support"). It is looks like a merge issue. Samuel's commit 0b1d60d6dd9e ("riscv: Fix build with CONFIG_CC_OPTIMIZE_FOR_SIZE=y") do not base on Conor's commit and revert to __riscv_zihintpause. So this patch can fix it. Signed-off-by: Minda Chen <minda.chen@starfivetech.com> Fixes: 3c349eacc559 ("Merge patch "riscv: Fix build with CONFIG_CC_OPTIMIZE_FOR_SIZE=y"") Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230802064215.31111-1-minda.chen@starfivetech.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-10-31riscv/mm: Fix the comment for swap pte formatXiao Wang
Swap type takes bits 7-11 and swap offset should start from bit 12. Signed-off-by: Xiao Wang <xiao.w.wang@intel.com> Reviewed-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20230921141652.2657054-1-xiao.w.wang@intel.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-10-31RISC-V: clarify the QEMU workaround in ISA parserTsukasa OI
Extensions prefixed with "Su" won't corrupt the workaround in many cases. The only exception is when the first multi-letter extension in the ISA string begins with "Su" and is not prefixed with an underscore. For instance, following ISA string can confuse this QEMU workaround. * "rv64imacsuclic" (RV64I + M + A + C + "Suclic") However, this case is very unlikely because extensions prefixed by either "Z", "Sm" or "Ss" will most likely precede first. For instance, the "Suclic" extension (draft as of now) will be placed after related "Smclic" and "Ssclic" extensions. It's also highly likely that other unprivileged extensions like "Zba" will precede. It's also possible to suppress the issue in the QEMU workaround with an underscore. Following ISA string won't confuse the QEMU workaround. * "rv64imac_suclic" (RV64I + M + A + C + delimited "Suclic") This fix is to tell kernel developers the nature of this workaround precisely. There are some "Su*" extensions to be ratified but don't worry about this workaround too much. This commit comes with other minor editorial fixes (for minor wording and spacing issues, without changing the meaning). Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/8a127608cf6194a6d288289f2520bd1744b81437.1690350252.git.research_trasio@irq.a4lg.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-10-31riscv: correct pt_level name via pgtable_l5/4_enabledSong Shuai
The pt_level uses CONFIG_PGTABLE_LEVELS to display page table names. But if page mode is downgraded from kernel cmdline or restricted by the hardware in 64BIT, it will give a wrong name. Like, using no4lvl for sv39, ptdump named the 1G-mapping as "PUD" that should be "PGD": 0xffffffd840000000-0xffffffd900000000 0x00000000c0000000 3G PUD D A G . . W R V So select "P4D/PUD" or "PGD" via pgtable_l5/4_enabled to correct it. Fixes: e8a62cc26ddf ("riscv: Implement sv48 support") Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Song Shuai <suagrfillet@gmail.com> Link: https://lore.kernel.org/r/20230712115740.943324-1-suagrfillet@gmail.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230830044129.11481-3-palmer@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-10-31RISC-V: Provide pgtable_l5_enabled on rv32Palmer Dabbelt
A few of the other page table level helpers are defined on rv32, but not pgtable_l5_enabled. This adds the definition as a constant and converts pgtable_l4_enabled to a constant as well. Link: https://lore.kernel.org/r/20230830044129.11481-2-palmer@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-10-31Merge patch series "RISC-V: Enable cbo.zero in usermode"Palmer Dabbelt
Andrew Jones <ajones@ventanamicro.com> says: In order for usermode to issue cbo.zero, it needs privilege granted to issue the extension instruction (patch 2) and to know that the extension is available and its block size (patch 3). Patch 1 could be separate from this series (it just fixes up some error messages), patches 4-5 convert the hwprobe selftest to a statically-linked, TAP test and patch 6 adds a new hwprobe test for the new information as well as testing CBO instructions can or cannot be issued as appropriate. * b4-shazam-merge: RISC-V: selftests: Add CBO tests RISC-V: selftests: Convert hwprobe test to kselftest API RISC-V: selftests: Statically link hwprobe test RISC-V: hwprobe: Expose Zicboz extension and its block size RISC-V: Enable cbo.zero in usermode RISC-V: Make zicbom/zicboz errors consistent Link: https://lore.kernel.org/r/20230918131518.56803-8-ajones@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-10-31Merge patch series "riscv: kexec: cleanup and fixups"Palmer Dabbelt
Song Shuai <songshuaishuai@tinylab.org> says: This series contains a cleanup for riscv_kexec_relocate() and two fixups for KEXEC_FILE and had passed the basic kexec test in my 64bit Qemu-virt. You can use this kexec-tools[3] to test the kexec-file-syscall and these patches. riscv: kexec: Cleanup riscv_kexec_relocate (patch1) ================================================== For readability and simplicity, cleanup the riscv_kexec_relocate code: - Re-sort the first 4 `mv` instructions against `riscv_kexec_method()` - Eliminate registers for debugging (s9,s10,s11) and storing const-value (s5,s6) - Replace `jalr` with `jr` for no-link jump riscv: kexec: Align the kexeced kernel entry (patch2) ================================================== The current riscv boot protocol requires 2MB alignment for RV64 and 4MB alignment for RV32. In KEXEC_FILE path, the elf_find_pbase() function should align the kexeced kernel entry according to the requirement, otherwise the kexeced kernel would silently BUG at the setup_vm(). riscv: kexec: Remove -fPIE for PURGATORY_CFLAGS (patch3) ================================================== With CONFIG_RELOCATABLE enabled, KBUILD_CFLAGS had a -fPIE option and then the purgatory/string.o was built to reference _ctype symbol via R_RISCV_GOT_HI20 relocations which can't be handled by purgatory. As a consequence, the kernel failed kexec_load_file() with: [ 880.386562] kexec_image: The entry point of kernel at 0x80200000 [ 880.388650] kexec_image: Unknown rela relocation: 20 [ 880.389173] kexec_image: Error loading purgatory ret=-8 So remove the -fPIE option for PURGATORY_CFLAGS to generate R_RISCV_PCREL_HI20 relocations type making puragtory work as it was. arch/riscv/kernel/elf_kexec.c | 8 ++++- arch/riscv/kernel/kexec_relocate.S | 52 +++++++++++++----------------- arch/riscv/purgatory/Makefile | 4 +++ 3 files changed, 34 insertions(+), 30 deletions(-) * b4-shazam-merge: riscv: kexec: Remove -fPIE for PURGATORY_CFLAGS riscv: kexec: Align the kexeced kernel entry riscv: kexec: Cleanup riscv_kexec_relocate Link: https://lore.kernel.org/r/20230907103304.590739-1-songshuaishuai@tinylab.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-10-31Merge tag 'kvm-riscv-6.7-1' of https://github.com/kvm-riscv/linux into HEADPaolo Bonzini
KVM/riscv changes for 6.7 - Smstateen and Zicond support for Guest/VM - Virtualized senvcfg CSR for Guest/VM - Added Smstateen registers to the get-reg-list selftests - Added Zicond to the get-reg-list selftests - Virtualized SBI debug console (DBCN) for Guest/VM - Added SBI debug console (DBCN) to the get-reg-list selftests
2023-10-28kbuild: remove ARCH_POSTLINK from module buildsMasahiro Yamada
The '%.ko' rule in arch/*/Makefile.postlink does nothing but call the 'true' command. Remove the unneeded code. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <n.schier@avm.de>
2023-10-28kbuild: unify vdso_install rulesMasahiro Yamada
Currently, there is no standard implementation for vdso_install, leading to various issues: 1. Code duplication Many architectures duplicate similar code just for copying files to the install destination. Some architectures (arm, sparc, x86) create build-id symlinks, introducing more code duplication. 2. Unintended updates of in-tree build artifacts The vdso_install rule depends on the vdso files to install. It may update in-tree build artifacts. This can be problematic, as explained in commit 19514fc665ff ("arm, kbuild: make "make install" not depend on vmlinux"). 3. Broken code in some architectures Makefile code is often copied from one architecture to another without proper adaptation. 'make vdso_install' for parisc does not work. 'make vdso_install' for s390 installs vdso64, but not vdso32. To address these problems, this commit introduces a generic vdso_install rule. Architectures that support vdso_install need to define vdso-install-y in arch/*/Makefile. vdso-install-y lists the files to install. For example, arch/x86/Makefile looks like this: vdso-install-$(CONFIG_X86_64) += arch/x86/entry/vdso/vdso64.so.dbg vdso-install-$(CONFIG_X86_X32_ABI) += arch/x86/entry/vdso/vdsox32.so.dbg vdso-install-$(CONFIG_X86_32) += arch/x86/entry/vdso/vdso32.so.dbg vdso-install-$(CONFIG_IA32_EMULATION) += arch/x86/entry/vdso/vdso32.so.dbg These files will be installed to $(MODLIB)/vdso/ with the .dbg suffix, if exists, stripped away. vdso-install-y can optionally take the second field after the colon separator. This is needed because some architectures install a vdso file as a different base name. The following is a snippet from arch/arm64/Makefile. vdso-install-$(CONFIG_COMPAT_VDSO) += arch/arm64/kernel/vdso32/vdso.so.dbg:vdso32.so This will rename vdso.so.dbg to vdso32.so during installation. If such architectures change their implementation so that the base names match, this workaround will go away. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Sven Schnelle <svens@linux.ibm.com> # s390 Reviewed-by: Nicolas Schier <nicolas@fjasle.eu> Reviewed-by: Guo Ren <guoren@kernel.org> Acked-by: Helge Deller <deller@gmx.de> # parisc Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2023-10-27riscv: Use separate IRQ shadow call stacksSami Tolvanen
When both CONFIG_IRQ_STACKS and SCS are enabled, also use a separate per-CPU shadow call stack. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20230927224757.1154247-13-samitolvanen@google.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-10-27riscv: Implement Shadow Call StackSami Tolvanen
Implement CONFIG_SHADOW_CALL_STACK for RISC-V. When enabled, the compiler injects instructions to all non-leaf C functions to store the return address to the shadow stack and unconditionally load it again before returning, which makes it harder to corrupt the return address through a stack overflow, for example. The active shadow call stack pointer is stored in the gp register, which makes SCS incompatible with gp relaxation. Use --no-relax-gp to ensure gp relaxation is disabled and disable global pointer loading. Add SCS pointers to struct thread_info, implement SCS initialization, and task switching Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20230927224757.1154247-12-samitolvanen@google.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-10-27riscv: Move global pointer loading to a macroSami Tolvanen
In Clang 17, -fsanitize=shadow-call-stack uses the newly declared platform register gp for storing shadow call stack pointers. As this is obviously incompatible with gp relaxation, in preparation for CONFIG_SHADOW_CALL_STACK support, move global pointer loading to a single macro, which we can cleanly disable when SCS is used instead. Link: https://reviews.llvm.org/rGaa1d2693c256 Link: https://github.com/riscv-non-isa/riscv-elf-psabi-doc/commit/a484e843e6eeb51f0cb7b8819e50da6d2444d769 Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20230927224757.1154247-11-samitolvanen@google.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-10-27riscv: Deduplicate IRQ stack switchingSami Tolvanen
With CONFIG_IRQ_STACKS, we switch to a separate per-CPU IRQ stack before calling handle_riscv_irq or __do_softirq. We currently have duplicate inline assembly snippets for stack switching in both code paths. Now that we can access per-CPU variables in assembly, implement call_on_irq_stack in assembly, and use that instead of redundant inline assembly. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20230927224757.1154247-10-samitolvanen@google.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-10-27riscv: VMAP_STACK overflow detection thread-safeDeepak Gupta
commit 31da94c25aea ("riscv: add VMAP_STACK overflow detection") added support for CONFIG_VMAP_STACK. If overflow is detected, CPU switches to `shadow_stack` temporarily before switching finally to per-cpu `overflow_stack`. If two CPUs/harts are racing and end up in over flowing kernel stack, one or both will end up corrupting each other state because `shadow_stack` is not per-cpu. This patch optimizes per-cpu overflow stack switch by directly picking per-cpu `overflow_stack` and gets rid of `shadow_stack`. Following are the changes in this patch - Defines an asm macro to obtain per-cpu symbols in destination register. - In entry.S, when overflow is detected, per-cpu overflow stack is located using per-cpu asm macro. Computing per-cpu symbol requires a temporary register. x31 is saved away into CSR_SCRATCH (CSR_SCRATCH is anyways zero since we're in kernel). Please see Links for additional relevant disccussion and alternative solution. Tested by `echo EXHAUST_STACK > /sys/kernel/debug/provoke-crash/DIRECT` Kernel crash log below Insufficient stack space to handle exception!/debug/provoke-crash/DIRECT Task stack: [0xff20000010a98000..0xff20000010a9c000] Overflow stack: [0xff600001f7d98370..0xff600001f7d99370] CPU: 1 PID: 205 Comm: bash Not tainted 6.1.0-rc2-00001-g328a1f96f7b9 #34 Hardware name: riscv-virtio,qemu (DT) epc : __memset+0x60/0xfc ra : recursive_loop+0x48/0xc6 [lkdtm] epc : ffffffff808de0e4 ra : ffffffff0163a752 sp : ff20000010a97e80 gp : ffffffff815c0330 tp : ff600000820ea280 t0 : ff20000010a97e88 t1 : 000000000000002e t2 : 3233206874706564 s0 : ff20000010a982b0 s1 : 0000000000000012 a0 : ff20000010a97e88 a1 : 0000000000000000 a2 : 0000000000000400 a3 : ff20000010a98288 a4 : 0000000000000000 a5 : 0000000000000000 a6 : fffffffffffe43f0 a7 : 00007fffffffffff s2 : ff20000010a97e88 s3 : ffffffff01644680 s4 : ff20000010a9be90 s5 : ff600000842ba6c0 s6 : 00aaaaaac29e42b0 s7 : 00fffffff0aa3684 s8 : 00aaaaaac2978040 s9 : 0000000000000065 s10: 00ffffff8a7cad10 s11: 00ffffff8a76a4e0 t3 : ffffffff815dbaf4 t4 : ffffffff815dbaf4 t5 : ffffffff815dbab8 t6 : ff20000010a9bb48 status: 0000000200000120 badaddr: ff20000010a97e88 cause: 000000000000000f Kernel panic - not syncing: Kernel stack overflow CPU: 1 PID: 205 Comm: bash Not tainted 6.1.0-rc2-00001-g328a1f96f7b9 #34 Hardware name: riscv-virtio,qemu (DT) Call Trace: [<ffffffff80006754>] dump_backtrace+0x30/0x38 [<ffffffff808de798>] show_stack+0x40/0x4c [<ffffffff808ea2a8>] dump_stack_lvl+0x44/0x5c [<ffffffff808ea2d8>] dump_stack+0x18/0x20 [<ffffffff808dec06>] panic+0x126/0x2fe [<ffffffff800065ea>] walk_stackframe+0x0/0xf0 [<ffffffff0163a752>] recursive_loop+0x48/0xc6 [lkdtm] SMP: stopping secondary CPUs ---[ end Kernel panic - not syncing: Kernel stack overflow ]--- Cc: Guo Ren <guoren@kernel.org> Cc: Jisheng Zhang <jszhang@kernel.org> Link: https://lore.kernel.org/linux-riscv/Y347B0x4VUNOd6V7@xhacker/T/#t Link: https://lore.kernel.org/lkml/20221124094845.1907443-1-debug@rivosinc.com/ Signed-off-by: Deepak Gupta <debug@rivosinc.com> Co-developed-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Acked-by: Guo Ren <guoren@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20230927224757.1154247-9-samitolvanen@google.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-10-26Merge tag 'soc-fixes-6.7-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "A couple of platforms have some last-minute fixes, in particular: - riscv gets some fixes for noncoherent DMA on the renesas and thead platforms and dts fix for SPI on the visionfive 2 board - Qualcomm Snapdragon gets three dts fixes to address board specific regressions on the pmic and gpio nodes - Rockchip platforms get multiple dts fixes to address issues on the recent rk3399 platform as well as the older rk3128 platform that apparently regressed a while ago. - TI OMAP gets some trivial code and dts fixes and a regression fix for the omap1 ams-delta modem - NXP i.MX firmware has one fix for a use-after-free but in its error handling" * tag 'soc-fixes-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits) soc: renesas: ARCH_R9A07G043 depends on !RISCV_ISA_ZICBOM riscv: only select DMA_DIRECT_REMAP from RISCV_ISA_ZICBOM and ERRATA_THEAD_PBMT riscv: RISCV_NONSTANDARD_CACHE_OPS shouldn't depend on RISCV_DMA_NONCOHERENT riscv: dts: thead: set dma-noncoherent to soc bus arm64: dts: rockchip: Fix i2s0 pin conflict on ROCK Pi 4 boards arm64: dts: rockchip: Add i2s0-2ch-bus-bclk-off pins to RK3399 clk: ti: Fix missing omap5 mcbsp functional clock and aliases clk: ti: Fix missing omap4 mcbsp functional clock and aliases ARM: OMAP1: ams-delta: Fix MODEM initialization failure soc: renesas: Make ARCH_R9A07G043 depend on required options riscv: dts: starfive: visionfive 2: correct spi's ss pin firmware/imx-dsp: Fix use_after_free in imx_dsp_setup_channels() ARM: OMAP: timer32K: fix all kernel-doc warnings ARM: omap2: fix a debug printk ARM: dts: rockchip: Fix timer clocks for RK3128 ARM: dts: rockchip: Add missing quirk for RK3128's dma engine ARM: dts: rockchip: Add missing arm timer interrupt for RK3128 ARM: dts: rockchip: Fix i2c0 register address for RK3128 arm64: dts: rockchip: set codec system-clock-fixed on px30-ringneck-haikou arm64: dts: rockchip: use codec as clock master on px30-ringneck-haikou ...