| Age | Commit message (Collapse) | Author |
|---|
|
Convert the PolarFire SoC devicetrees to use the new properties
"riscv,isa-base" & "riscv,isa-extensions".
For compatibility with other projects, "riscv,isa" remains.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
The mailbox on PolarFire SoC should really have three reg properties,
not two. Without splitting into three sections, the system controller's
QSPI cannot be accessed as it sits inside the current first range. The
driver & binding have been adapted to account for both two & three
ranges, so fix the dts too.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
The macb on PolarFire SoC has reset support which the generic compatible
does not use. Add the newly introduced MPFS specific compatible as the
primary compatible to avail of this support & wire up the reset to the
clock controllers devicetree entry.
Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
The "fabric clocks" in current PolarFire SoC device trees are not
really fixed clocks. Their frequency is set by the bitstream, so having
them located in -fabric.dtsi is not a problem - they're just as "fixed"
as the IP blocks etc used in the FPGA fabric.
However, their configuration can be read at runtime (and to an extent
they can be controlled, although the intended usage is static
configurations set by the bitstream) through the system controller bus.
In the v2022.09 icicle kit reference design a single CCC (north-west
corner) is enabled, using a 50 MHz off-chip oscillator as its reference.
Updating to the v2022.09 icicle kit reference design is required, as
prior to this release, the CCC was not fixed & could change for any
given run of the synthesis tool.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into for-next
Microchip RISC-V devicetrees for v6.1
Fixups, reference design changes and new boards:
- The addition of QSPI support for mpfs had a corresponding change to
the devicetree node.
- The v2022.{09,10} reference designs brought with them several memory
map changes which are not backwards compatible. The old devicetrees
from the v2022.08 and earlier releases still work with current
kernels.
- Two new devicetrees for a first-party development kit and for the
Aries Embedded M100FPSEVP kit.
- Corresponding dt-bindings changes for the above.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'dt-for-palmer-v6.1-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: microchip: fix fabric i2c reg size
riscv: dts: microchip: update memory configuration for v2022.10
riscv: dts: microchip: add a devicetree for aries' m100pfsevp
riscv: dts: microchip: add sevkit device tree
riscv: dts: microchip: reduce the fic3 clock rate
riscv: dts: microchip: icicle: re-jig fabric peripheral addresses
riscv: dts: microchip: icicle: update pci address properties
riscv: dts: microchip: move the mpfs' pci node to -fabric.dtsi
riscv: dts: microchip: add pci dma ranges for the icicle kit
dt-bindings: riscv: microchip: document the sev kit
dt-bindings: riscv: microchip: document the aries m100pfsevp
dt-bindings: riscv: microchip: document icicle reference design
riscv: dts: microchip: add qspi compatible fallback
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
In today's edition of moving things around:
The PCIe root port on PolarFire SoC is more part of the FPGA than of
the Core Complex. It is located on the other side of the chip and,
apart from its interrupts, most of its configuration is determined
by the FPGA bitstream rather. This includes:
- address translation in both directions
- the addresses at which the config and data regions appear to the
core complex
- the clocks used by the AXI bus
- the plic interrupt used
Moving the PCIe node to the -fabric.dtsi makes it clearer than a
singular configuration for root port is not correct & allows the
base SoC dtsi to be more easily included.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
PolarFire SoC does not have the same l2 cache controller as the fu540,
featuring an extra interrupt. Appease the devicetree checker overlords
by adding a PolarFire SoC specific compatible to fix the below sort of
warnings:
mpfs-polarberry.dtb: cache-controller@2010000: interrupts: [[1], [3], [4], [2]] is too long
Fixes: 0fa6107eca41 ("RISC-V: Initial DTS for Microchip ICICLE board")
Fixes: 34fc9cc3aebe ("riscv: dts: microchip: correct L2 cache interrupts")
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
An AXI master address translation table property was inadvertently
added to the device tree & this was not caught by dtbs_check at the
time. Remove the property - it should not be in mpfs.dtsi anyway as
it would be more suitable in -fabric.dtsi nor does it actually apply
to the version of the reference design we are using for upstream.
Link: https://www.microsemi.com/document-portal/doc_download/1245812-polarfire-fpga-and-polarfire-soc-fpga-pci-express-user-guide # Section 1.3.3
Fixes: 528a5b1f2556 ("riscv: dts: microchip: add new peripherals to icicle kit device tree")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Recent versions of dt-schema complain about the PCIe controller's child
node name:
arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dtb: pcie@2000000000: Unevaluated properties are not allowed ('clock-names', 'clocks', 'legacy-interrupt-controller', 'microchip,axi-m-atr0' were unexpected)
From schema: Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
Make the dts match the correct property name in the dts.
Fixes: 528a5b1f2556 ("riscv: dts: microchip: add new peripherals to icicle kit device tree")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
The "PolarFire SoC MSS Technical Reference Manual" documents the
following PLIC interrupts:
1 - L2 Cache Controller Signals when a metadata correction event occurs
2 - L2 Cache Controller Signals when an uncorrectable metadata event occurs
3 - L2 Cache Controller Signals when a data correction event occurs
4 - L2 Cache Controller Signals when an uncorrectable data event occurs
This differs from the SiFive FU540 which only has three L2 cache related
interrupts.
The sequence in the device tree is defined by an enum:
enum {
DIR_CORR = 0,
DATA_CORR,
DATA_UNCORR,
DIR_UNCORR,
};
So the correct sequence of the L2 cache interrupts is
interrupts = <1>, <3>, <4>, <2>;
[Conor]
This manifests as an unusable system if the l2-cache driver is enabled,
as the wrong interrupt gets cleared & the handler prints errors to the
console ad infinitum.
Fixes: 0fa6107eca41 ("RISC-V: Initial DTS for Microchip ICICLE board")
CC: stable@vger.kernel.org # 5.15: e35b07a7df9b: riscv: dts: microchip: mpfs: Group tuples in interrupt properties
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
The "hard" QSPI peripheral on PolarFire SoC is derived from version 2
of the FPGA IP core. The original binding had no fallback etc, so this
device tree is valid as is. There was also no functional driver for the
QSPI IP, so no device with a devicetree from a previous mainline
release will regress.
Link: https://lore.kernel.org/linux-spi/7c9f0d96-2882-964a-cd1f-916ddb3f0410@linaro.org/
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Enabling the FPU is now a static_key
- Improvements to the Svpbmt support
- CPU topology bindings for a handful of systems
- Support for systems with 64-bit hart IDs
- Many settings have been enabled in the defconfig, including both
support for the StarFive systems and many of the Docker requirements
There are also a handful of cleanups and improvements, as usual.
* tag 'riscv-for-linus-5.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (28 commits)
riscv: enable Docker requirements in defconfig
riscv: convert the t-head pbmt errata to use the __nops macro
riscv: introduce nops and __nops macros for NOP sequences
RISC-V: Add fast call path of crash_kexec()
riscv: mmap with PROT_WRITE but no PROT_READ is invalid
riscv/efi_stub: Add 64bit boot-hartid support on RV64
riscv: cpu: Add 64bit hartid support on RV64
riscv: smp: Add 64bit hartid support on RV64
riscv: spinwait: Fix hartid variable type
riscv: cpu_ops_sbi: Add 64bit hartid support on RV64
riscv: dts: sifive: "fix" pmic watchdog node name
riscv: dts: canaan: Add k210 topology information
riscv: dts: sifive: Add fu740 topology information
riscv: dts: sifive: Add fu540 topology information
riscv: dts: starfive: Add JH7100 CPU topology
RISC-V: Add CONFIG_{NON,}PORTABLE
riscv: config: enable SOC_STARFIVE in defconfig
riscv: dts: microchip: Add mpfs' topology information
riscv: Kconfig.socs: Add comments
riscv: Kconfig.erratas: Add comments
...
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mpfs has no cpu-map node, so tools like hwloc cannot correctly
parse the topology. Add the node using the existing node labels.
Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Link: https://github.com/open-mpi/hwloc/issues/536
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
The initial PolarFire SoC devicetree must have been forked off from
the fu540 one prior to the addition of l2cache controller support being
added there. When the controller node was added to mpfs.dtsi, it was
not hooked up to the CPUs & thus sysfs reports an incorrect cache
configuration. Hook it up.
Fixes: 0fa6107eca41 ("RISC-V: Initial DTS for Microchip ICICLE board")
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-06-25
this is a pull request of 22 patches for net-next/master.
The first 2 patches target the xilinx driver. Srinivas Neeli's patch
adds Transmitter Delay Compensation (TDC) support, a patch by me fixes
a typo.
The next patch is by me and fixes a typo in the m_can driver.
Another patch by me allows the configuration of fixed bit rates
without need for do_set_bittiming callback.
The following 7 patches are by Vincent Mailhol and refactor the
can-dev module and Kbuild, de-inline the can_dropped_invalid_skb()
function, which has grown over the time, and drop outgoing skbs if the
controller is in listen only mode.
Max Staudt's patch fixes a reference in the networking/can.rst
documentation.
Vincent Mailhol provides 2 patches with cleanups for the etas_es58x
driver.
Conor Dooley adds bindings for the mpfs-can to the PolarFire SoC dtsi.
Another patch by me allows the configuration of fixed data bit rates
without need for do_set_data_bittiming callback.
The last 5 patches are by Frank Jungclaus. They prepare the esd_usb
driver to add support for the the CAN-USB/3 device in a later series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove the spi-max-frequency property from the spi0 controller
node as it is supposed to be a per SPI peripheral device property.
Reported-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/lkml/20220526014141.2872567-1-robh@kernel.org/
Signed-off-by: Nagasuresh Relli <nagasuresh.relli@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
PolarFire SoC has a pair of CAN controllers, but as they were
undocumented there were omitted from the device tree. Add them.
Link: https://lore.kernel.org/all/20220607065459.2035746-3-conor.dooley@microchip.com
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
PolarFire SoC /does/ have a SiFive pdma, despite what I suggested as a
conflict resolution to Zong. Somehow the entry fell through the cracks
between versions of my dt patches, so re-add it with Zong's updated
compatible & dma-channels property.
Fixes: c5094f371008 ("riscv: dts: microchip: refactor icicle kit device tree")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
spi-max-frequency property is supposed to be a per SPI peripheral device
property, not a SPI controller property, so remove it.
Reported-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/lkml/20220526014141.2872567-1-robh@kernel.org/
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Currently mpfs-fabric.dtsi is included by mpfs.dtsi - which is fine
currently since there is only one board with this SoC upstream.
However if another board was added, it would include the fabric contents
of the Icicle Kit's reference design. To avoid this, rename
mpfs-fabric.dtsi to mpfs-icicle-kit-fabric.dtsi & include it in the dts
rather than mpfs.dtsi.
mpfs-icicle-kit-fabric.dtsi specifically matches the 22.03 reference
design for the icicle kit's FPGA fabric & an older version of the
design may not have the i2c or pwm devices - so add the compatible
string to document this.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220509142610.128590-6-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Having the SoC vendor both as the directory and in the filename adds
little. Remove microchip from the filenames so that the files will
resemble the other directories in riscv (and arm64). The new names
follow a soc-board.dts & soc{,-fabric}.dtsi pattern.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220509142610.128590-4-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
