summaryrefslogtreecommitdiff
path: root/arch/loongarch
AgeCommit message (Collapse)Author
2022-10-09Merge tag 'efi-next-for-v6.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI updates from Ard Biesheuvel: "A bit more going on than usual in the EFI subsystem. The main driver for this has been the introduction of the LoonArch architecture last cycle, which inspired some cleanup and refactoring of the EFI code. Another driver for EFI changes this cycle and in the future is confidential compute. The LoongArch architecture does not use either struct bootparams or DT natively [yet], and so passing information between the EFI stub and the core kernel using either of those is undesirable. And in general, overloading DT has been a source of issues on arm64, so using DT for this on new architectures is a to avoid for the time being (even if we might converge on something DT based for non-x86 architectures in the future). For this reason, in addition to the patch that enables EFI boot for LoongArch, there are a number of refactoring patches applied on top of which separate the DT bits from the generic EFI stub bits. These changes are on a separate topich branch that has been shared with the LoongArch maintainers, who will include it in their pull request as well. This is not ideal, but the best way to manage the conflicts without stalling LoongArch for another cycle. Another development inspired by LoongArch is the newly added support for EFI based decompressors. Instead of adding yet another arch-specific incarnation of this pattern for LoongArch, we are introducing an EFI app based on the existing EFI libstub infrastructure that encapulates the decompression code we use on other architectures, but in a way that is fully generic. This has been developed and tested in collaboration with distro and systemd folks, who are eager to start using this for systemd-boot and also for arm64 secure boot on Fedora. Note that the EFI zimage files this introduces can also be decompressed by non-EFI bootloaders if needed, as the image header describes the location of the payload inside the image, and the type of compression that was used. (Note that Fedora's arm64 GRUB is buggy [0] so you'll need a recent version or switch to systemd-boot in order to use this.) Finally, we are adding TPM measurement of the kernel command line provided by EFI. There is an oversight in the TCG spec which results in a blind spot for command line arguments passed to loaded images, which means that either the loader or the stub needs to take the measurement. Given the combinatorial explosion I am anticipating when it comes to firmware/bootloader stacks and firmware based attestation protocols (SEV-SNP, TDX, DICE, DRTM), it is good to set a baseline now when it comes to EFI measured boot, which is that the kernel measures the initrd and command line. Intermediate loaders can measure additional assets if needed, but with the baseline in place, we can deploy measured boot in a meaningful way even if you boot into Linux straight from the EFI firmware. Summary: - implement EFI boot support for LoongArch - implement generic EFI compressed boot support for arm64, RISC-V and LoongArch, none of which implement a decompressor today - measure the kernel command line into the TPM if measured boot is in effect - refactor the EFI stub code in order to isolate DT dependencies for architectures other than x86 - avoid calling SetVirtualAddressMap() on arm64 if the configured size of the VA space guarantees that doing so is unnecessary - move some ARM specific code out of the generic EFI source files - unmap kernel code from the x86 mixed mode 1:1 page tables" * tag 'efi-next-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits) efi/arm64: libstub: avoid SetVirtualAddressMap() when possible efi: zboot: create MemoryMapped() device path for the parent if needed efi: libstub: fix up the last remaining open coded boot service call efi/arm: libstub: move ARM specific code out of generic routines efi/libstub: measure EFI LoadOptions efi/libstub: refactor the initrd measuring functions efi/loongarch: libstub: remove dependency on flattened DT efi: libstub: install boot-time memory map as config table efi: libstub: remove DT dependency from generic stub efi: libstub: unify initrd loading between architectures efi: libstub: remove pointless goto kludge efi: libstub: simplify efi_get_memory_map() and struct efi_boot_memmap efi: libstub: avoid efi_get_memory_map() for allocating the virt map efi: libstub: drop pointless get_memory_map() call efi: libstub: fix type confusion for load_options_size arm64: efi: enable generic EFI compressed boot loongarch: efi: enable generic EFI compressed boot riscv: efi: enable generic EFI compressed boot efi/libstub: implement generic EFI zboot efi/libstub: move efi_system_table global var into separate object ...
2022-10-07Merge tag 'tty-6.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of TTY and Serial driver updates for 6.1-rc1. Lots of cleanups in here, no real new functionality this time around, with the diffstat being that we removed more lines than we added! Included in here are: - termios unification cleanups from Al Viro, it's nice to finally get this work done - tty serial transmit cleanups in various drivers in preparation for more cleanup and unification in future releases (that work was not ready for this release) - n_gsm fixes and updates - ktermios cleanups and code reductions - dt bindings json conversions and updates for new devices - some serial driver updates for new devices - lots of other tiny cleanups and janitorial stuff. Full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits) serial: cpm_uart: Don't request IRQ too early for console port tty: serial: do unlock on a common path in altera_jtaguart_console_putc() tty: serial: unify TX space reads under altera_jtaguart_tx_space() tty: serial: use FIELD_GET() in lqasc_tx_ready() tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar() tty: serial: allow pxa.c to be COMPILE_TESTed serial: stm32: Fix unused-variable warning tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL serial: 8250: Fix restoring termios speed after suspend serial: Deassert Transmit Enable on probe in driver-specific way serial: 8250_dma: Convert to use uart_xmit_advance() serial: 8250_omap: Convert to use uart_xmit_advance() MAINTAINERS: Solve warning regarding inexistent atmel-usart binding serial: stm32: Deassert Transmit Enable on ->rs485_config() serial: ar933x: Deassert Transmit Enable on ->rs485_config() tty: serial: atmel: Use FIELD_PREP/FIELD_GET tty: serial: atmel: Make the driver aware of the existence of GCLK tty: serial: atmel: Only divide Clock Divisor if the IP is USART tty: serial: atmel: Separate mode clearing between UART and USART dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock ...
2022-10-03Merge tag 'acpi-6.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "ACPI and PNP updates for 6.1-rc1. These rearrange the ACPI device object initialization code (to get rid of a redundant parent pointer from struct acpi_device among other things), unify the _UID handling, drop support for some _OSI strings that should not be necessary any more, add new IDs to support more hardware and some more quirks, fix a few issues and clean up code all over. Specifics: - Reimplement acpi_get_pci_dev() using the list of physical devices associated with the given ACPI device object (Rafael Wysocki) - Rename ACPI device object reference counting functions (Rafael Wysocki) - Rearrange ACPI device object initialization code (Rafael Wysocki) - Drop parent field from struct acpi_device (Rafael Wysocki) - Extend the the int3472-tps68470 driver to support multiple consumers of a single TPS68470 along with the requisite framework-level support (Daniel Scally) - Filter out non-memory resources in is_memory(), add a helper function to find all memory type resources of an ACPI device object and use that function in 3 places (Heikki Krogerus) - Add IRQ override quirks for Asus Vivobook K3402ZA/K3502ZA and ASUS model S5402ZA (Tamim Khan, Kellen Renshaw) - Fix acpi_dev_state_d0() kerneldoc (Sakari Ailus) - Fix up suspend-to-idle support on ASUS Rembrandt laptops (Mario Limonciello) - Clean up ACPI platform devices support code (Andy Shevchenko, John Garry) - Clean up ACPI bus management code (Andy Shevchenko, ye xingchen) - Add support for multiple DMA windows with different offsets to the ACPI device enumeration code and use it on LoongArch (Jianmin Lv) - Clean up the ACPI LPSS (Intel SoC) driver (Andy Shevchenko) - Add a quirk for Dell Inspiron 14 2-in-1 for StorageD3Enable (Mario Limonciello) - Drop unused dev_fmt() and redundant 'HMAT' prefix from the HMAT parsing code (Liu Shixin) - Make ACPI FPDT parsing code avoid calling acpi_os_map_memory() on invalid physical addresses (Hans de Goede) - Silence missing-declarations warning related to Apple device properties management (Lukas Wunner) - Disable frequency invariance in the CPPC library if registers used by cppc_get_perf_ctrs() are accessed via PCC (Jeremy Linton) - Add ACPI disabled check to acpi_cpc_valid() (Perry Yuan) - Fix Tx acknowledge in the PCC address space handler (Huisong Li) - Use wait_for_completion_timeout() for PCC mailbox operations (Huisong Li) - Release resources on PCC address space setup failure path (Rafael Mendonca) - Remove unneeded result variables from APEI code (ye xingchen) - Print total number of records found during BERT log parsing (Dmitry Monakhov) - Drop support for 3 _OSI strings that should not be necessary any more and update documentation on custom _OSI strings so that adding new ones is not encouraged any more (Mario Limonciello) - Drop unneeded result variable from ec_write() (ye xingchen) - Remove the leftover struct acpi_ac_bl from the ACPI AC driver (Hanjun Guo) - Reorder symbols to get rid of a few forward declarations in the ACPI fan driver (Uwe Kleine-König) - Add Toshiba Satellite/Portege Z830 ACPI backlight quirk (Arvid Norlander) - Add ARM DMA-330 controller to the supported list in the ACPI AMBA driver (Vijayenthiran Subramaniam) - Drop references to non-functional 01.org/linux-acpi web site from MAINTAINERS and Kconfig help texts (Rafael Wysocki) - Replace strlcpy() with unused retval with strscpy() in the ACPI support code (Wolfram Sang) - Do not initialize ret in main() in the pfrut utility (Shi junming) - Drop useless ACPI DSDT override documentation (Rafael Wysocki) - Fix a few typos and wording mistakes in the ACPI device enumeration documentation (Jean Delvare) - Introduce acpi_dev_uid_to_integer() to convert a _UID string into an integer value (Andy Shevchenko) - Use acpi_dev_uid_to_integer() in several places to unify _UID handling (Andy Shevchenko) - Drop unused pnpid32_to_pnpid() declaration from PNP code (Gaosheng Cui)" * tag 'acpi-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (79 commits) ACPI: LPSS: Deduplicate skipping device in acpi_lpss_create_device() ACPI: LPSS: Replace loop with first entry retrieval ACPI: x86: s2idle: Add another ID to s2idle_dmi_table ACPI: x86: s2idle: Fix a NULL pointer dereference MAINTAINERS: Drop records pointing to 01.org/linux-acpi ACPI: Kconfig: Drop link to https://01.org/linux-acpi ACPI: docs: Drop useless DSDT override documentation ACPI: DPTF: Drop stale link from Kconfig help ACPI: x86: s2idle: Add a quirk for ASUSTeK COMPUTER INC. ROG Flow X13 ACPI: x86: s2idle: Add a quirk for Lenovo Slim 7 Pro 14ARH7 ACPI: x86: s2idle: Add a quirk for ASUS ROG Zephyrus G14 ACPI: x86: s2idle: Add a quirk for ASUS TUF Gaming A17 FA707RE ACPI: x86: s2idle: Add module parameter to prefer Microsoft GUID ACPI: x86: s2idle: If a new AMD _HID is missing assume Rembrandt ACPI: x86: s2idle: Move _HID handling for AMD systems into structures platform/x86: int3472: Add board data for Surface Go2 IR camera platform/x86: int3472: Support multiple gpio lookups in board data platform/x86: int3472: Support multiple clock consumers ACPI: bus: Add iterator for dependent devices ACPI: scan: Add acpi_dev_get_next_consumer_dev() ...
2022-09-29LoongArch: Clean up loongson3_smp_ops declarationYanteng Si
Since loongson3_smp_ops is not used in LoongArch anymore, let's remove it for cleanup. Fixes: f2ac457a6138 ("LoongArch: Add CPU definition headers") Signed-off-by: Yanteng Si <siyanteng@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-09-29LoongArch: Fix and cleanup csr_era handling in do_ri()Huacai Chen
We don't emulate reserved instructions and just send a signal to the current process now. So we don't need to call compute_return_era() to add 4 (point to the next instruction) to csr_era in pt_regs. RA/ERA's backup/restore is cleaned up as well. Signed-off-by: Jun Yi <yijun@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-09-29LoongArch: Align the address of kernel_entry to 4KBHuacai Chen
Align the address of kernel_entry to 4KB, to avoid early tlb miss exception in case the entry code crosses page boundary. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-09-27Merge tag 'efi-loongarch-for-v6.1-2' into HEADArd Biesheuvel
Second shared stable tag between EFI and LoongArch trees This is necessary because the EFI libstub refactoring patches are mostly directed at enabling LoongArch to wire up generic EFI boot support without being forced to consume DT properties that conflict with information that EFI also provides, e.g., memory map and reservations, etc.
2022-09-27efi/loongarch: libstub: remove dependency on flattened DTArd Biesheuvel
LoongArch does not use FDT or DT natively [yet], and the only reason it currently uses it is so that it can reuse the existing EFI stub code. Overloading the DT with data passed between the EFI stub and the core kernel has been a source of problems: there is the overlap between information provided by EFI which DT can also provide (initrd base/size, command line, memory descriptions), requiring us to reason about which is which and what to prioritize. It has also resulted in ABI leaks, i.e., internal ABI being promoted to external ABI inadvertently because the bootloader can set the EFI stub's DT properties as well (e.g., "kaslr-seed"). This has become especially problematic with boot environments that want to pretend that EFI boot is being done (to access ACPI and SMBIOS tables, for instance) but have no ability to execute the EFI stub, and so the environment that the EFI stub creates is emulated [poorly, in some cases]. Another downside of treating DT like this is that the DT binary that the kernel receives is different from the one created by the firmware, which is undesirable in the context of secure and measured boot. Given that LoongArch support in Linux is brand new, we can avoid these pitfalls, and treat the DT strictly as a hardware description, and use a separate handover method between the EFI stub and the kernel. Now that initrd loading and passing the EFI memory map have been refactored into pure EFI routines that use EFI configuration tables, the only thing we need to pass directly is the kernel command line (even if we could pass this via a config table as well, it is used extremely early, so passing it directly is preferred in this case.) Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Huacai Chen <chenhuacai@loongson.cn>
2022-09-24LoongArch: Use acpi_arch_dma_setup() and remove ARCH_HAS_PHYS_TO_DMAJianmin Lv
Use _DMA defined in ACPI spec for translation between DMA address and CPU address, and implement acpi_arch_dma_setup for initializing dev->dma_range_map, where acpi_dma_get_range is called for parsing _DMA. e.g. If we have two dma ranges: cpu address dma address size offset 0x200080000000 0x2080000000 0x400000000 0x1fe000000000 0x400080000000 0x4080000000 0x400000000 0x3fc000000000 _DMA for pci devices should be declared in host bridge as flowing: Name (_DMA, ResourceTemplate() { QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite, 0x0, 0x4080000000, 0x447fffffff, 0x3fc000000000, 0x400000000, , , ) QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite, 0x0, 0x2080000000, 0x247fffffff, 0x1fe000000000, 0x400000000, , , ) }) Acked-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-09-20loongarch: efi: enable generic EFI compressed bootArd Biesheuvel
Wire up the generic EFI zboot support for LoongArch64 Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2022-09-17efi/libstub: use EFI provided memcpy/memset routinesArd Biesheuvel
The stub is used in different execution environments, but on arm64, RISC-V and LoongArch, we still use the core kernel's implementation of memcpy and memset, as they are just a branch instruction away, and can generally be reused even from code such as the EFI stub that runs in a completely different address space. KAsan complicates this slightly, resulting in the need for some hacks to expose the uninstrumented, __ prefixed versions as the normal ones, as the latter are instrumented to include the KAsan checks, which only work in the core kernel. Unfortunately, #define'ing memcpy to __memcpy when building C code does not guarantee that no explicit memcpy() calls will be emitted. And with the upcoming zboot support, which consists of a separate binary which therefore needs its own implementation of memcpy/memset anyway, it's better to provide one explicitly instead of linking to the existing one. Given that EFI exposes implementations of memmove() and memset() via the boot services table, let's wire those up in the appropriate way, and drop the references to the core kernel ones. Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2022-09-06efi/loongarch: Add efistub booting supportHuacai Chen
This patch adds efistub booting support, which is the standard UEFI boot protocol for LoongArch to use. We use generic efistub, which means we can pass boot information (i.e., system table, memory map, kernel command line, initrd) via a light FDT and drop a lot of non-standard code. We use a flat mapping to map the efi runtime in the kernel's address space. In efi, VA = PA; in kernel, VA = PA + PAGE_OFFSET. As a result, flat mapping is not identity mapping, SetVirtualAddressMap() is still needed for the efi runtime. Tested-by: Xi Ruoyao <xry111@xry111.site> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> [ardb: change fpic to fpie as suggested by Xi Ruoyao] Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2022-09-05Merge 6.0-rc4 into tty-nextGreg Kroah-Hartman
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-03LoongArch: mm: Remove the unneeded result variableye xingchen
Return the value pa_to_nid() directly instead of storing it in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-09-03LoongArch: Fix arch_remove_memory() undefined build errorYupeng Li
The kernel build error when unslected CONFIG_MEMORY_HOTREMOVE because arch_remove_memory() is needed by mm/memory_hotplug.c but undefined. Some build error messages like: LD vmlinux.o MODPOST vmlinux.symvers MODINFO modules.builtin.modinfo GEN modules.builtin LD .tmp_vmlinux.kallsyms1 loongarch64-linux-gnu-ld: mm/memory_hotplug.o: in function `.L242': memory_hotplug.c:(.ref.text+0x930): undefined reference to `arch_remove_memory' make: *** [Makefile:1169：vmlinux] 错误 1 Removed CONFIG_MEMORY_HOTREMOVE requirement and rearrange the file refer to the definitions of other platform architectures. Signed-off-by: Yupeng Li <liyupeng@zbhlos.com> Signed-off-by: Caicai <caizp2008@163.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-09-03LoongArch: Fix section mismatch due to acpi_os_ioremap()Huacai Chen
Now acpi_os_ioremap() is marked with __init because it calls memblock_ is_memory() which is also marked with __init in the !ARCH_KEEP_MEMBLOCK case. However, acpi_os_ioremap() is called by ordinary functions such as acpi_os_{read, write}_memory() and causes section mismatch warnings: WARNING: modpost: vmlinux.o: section mismatch in reference: acpi_os_read_memory (section: .text) -> acpi_os_ioremap (section: .init.text) WARNING: modpost: vmlinux.o: section mismatch in reference: acpi_os_write_memory (section: .text) -> acpi_os_ioremap (section: .init.text) Fix these warnings by selecting ARCH_KEEP_MEMBLOCK unconditionally and removing the __init modifier of acpi_os_ioremap(). This can also give a chance to track "memory" and "reserved" memblocks after early boot. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-09-03LoongArch: Improve dump_tlb() output messagesHuacai Chen
1, Use nr/nx to replace ri/xi; 2, Add 0x prefix for hexadecimal data. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-09-03LoongArch: Adjust arch_do_signal_or_restart() to adapt generic entryHuacai Chen
Commit 8ba62d37949e248c69 ("task_work: Call tracehook_notify_signal from get_signal on all architectures") adjust arch_do_signal_or_restart() for all architectures. LoongArch hasn't been upstream yet at that time and can be still built successfully without adjustment because this function has a weak version with the correct prototype. It is obviously that we should convert LoongArch to use new API, otherwise some signal handlings will be lost. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-09-03LoongArch: Avoid orphan input sectionsArd Biesheuvel
Ensure that all input sections are listed explicitly in the linker script, and issue a warning otherwise. This ensures that the binary image matches the PE/COFF and other image metadata exactly, which is important for things like code signing. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-30loongarch: remove generic-y += termios.hAl Viro
not really needed - UAPI mandatory-y += termios.h is sufficient... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Huacai Chen <chenhuacai@kernel.org> Link: https://lore.kernel.org/r/20220821010239.1554132-1-viro@zeniv.linux.org.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25LoongArch: mm: Avoid unnecessary page fault retires on shared memory typesHuacai Chen
Commit d92725256b4f22d0 ("mm: avoid unnecessary page fault retires on shared memory types") modifies do_page_fault() to handle the VM_FAULT_ COMPLETED case, but forget to change for LoongArch, so fix it as other architectures does. Fixes: d92725256b4f22d0 ("mm: avoid unnecessary page fault retires on shared memory types") Reviewed-by: Guo Ren <guoren@kernel.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-25LoongArch: Add subword xchg/cmpxchg emulationHuacai Chen
LoongArch only support 32-bit/64-bit xchg/cmpxchg in native. But percpu operation, qspinlock and some drivers need 8-bit/16-bit xchg/cmpxchg. We add subword xchg/cmpxchg emulation in this patch because the emulation has better performance than the generic implementation (on NUMA system), and it can fix some build errors meanwhile [1]. LoongArch's guarantee for forward progress (avoid many ll/sc happening at the same time and no one succeeds): We have the "exclusive access (with timeout) of ll" feature to avoid simultaneous ll (which also blocks other memory load/store on the same address), and the "random delay of sc" feature to avoid simultaneous sc. It is a mandatory requirement for multi-core LoongArch processors to implement such features, only except those single-core and dual-core processors (they also don't support multi-chip interconnection). Feature bits are introduced in CPUCFG3, bit 3 and bit 4 [2]. [1] https://lore.kernel.org/loongarch/CAAhV-H6vvkuOzy8OemWdYK3taj5Jn3bFX0ZTwE=twM8ywpBUYA@mail.gmail.com/T/#t [2] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#_cpucfg Reported-by: Sudip Mukherjee (Codethink) <sudipm.mukherjee@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Rui Wang <wangrui@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-25LoongArch: Cleanup headers to avoid circular dependencyHuacai Chen
When enable GENERIC_IOREMAP, there will be circular dependency to cause build errors. The root cause is that pgtable.h shouldn't include io.h but pgtable.h need some macros defined in io.h. So cleanup those macros and remove the unnecessary inclusions, as other architectures do. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-25LoongArch: Cleanup reset routines with new APIHuacai Chen
Cleanup reset routines by using new do_kernel_power_off() instead of old pm_power_off(), and then simplify the whole file (reset.c) organization by inlining some functions. This cleanup also fix a poweroff error if EFI runtime is disabled. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-25LoongArch: Fix build warnings in VDSOHuacai Chen
Fix build warnings in VDSO as below: arch/loongarch/vdso/vgettimeofday.c:9:5: warning: no previous prototype for '__vdso_clock_gettime' [-Wmissing-prototypes] 9 | int __vdso_clock_gettime(clockid_t clock, | ^~~~~~~~~~~~~~~~~~~~ arch/loongarch/vdso/vgettimeofday.c:15:5: warning: no previous prototype for '__vdso_gettimeofday' [-Wmissing-prototypes] 15 | int __vdso_gettimeofday(struct __kernel_old_timeval *tv, | ^~~~~~~~~~~~~~~~~~~ arch/loongarch/vdso/vgettimeofday.c:21:5: warning: no previous prototype for '__vdso_clock_getres' [-Wmissing-prototypes] 21 | int __vdso_clock_getres(clockid_t clock_id, | ^~~~~~~~~~~~~~~~~~~ arch/loongarch/vdso/vgetcpu.c:27:5: warning: no previous prototype for '__vdso_getcpu' [-Wmissing-prototypes] 27 | int __vdso_getcpu(unsigned int *cpu, unsigned int *node, struct getcpu_cache *unused) Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-25LoongArch: Select PCI_QUIRKS to avoid build errorHuacai Chen
PCI_LOONGSON is a mandatory for LoongArch and it is selected in Kconfig unconditionally, but its dependency PCI_QUIRKS is missing and may cause a build error when "make randconfig": arch/loongarch/pci/acpi.c: In function 'pci_acpi_setup_ecam_mapping': >> arch/loongarch/pci/acpi.c:103:29: error: 'loongson_pci_ecam_ops' undeclared (first use in this function) 103 | ecam_ops = &loongson_pci_ecam_ops; | ^~~~~~~~~~~~~~~~~~~~~ arch/loongarch/pci/acpi.c:103:29: note: each undeclared identifier is reported only once for each function it appears in Kconfig warnings: (for reference only) WARNING: unmet direct dependencies detected for PCI_LOONGSON Depends on [n]: PCI [=y] && (MACH_LOONGSON64 [=y] || COMPILE_TEST [=y]) && (OF [=y] || ACPI [=y]) && PCI_QUIRKS [=n] Selected by [y]: - LOONGARCH [=y] Fix it by selecting PCI_QUIRKS unconditionally, too. Reported-by: kernel test robot <lkp@intel.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-18Merge tag 'irqchip-fixes-6.0-1' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - A bunch of small fixes for the recently merged LoongArch drivers - A leftover from the non-SMP IRQ affinity rework affecting the Hyper-V IOMMU code Link: https://lore.kernel.org/r/20220812125910.2227338-1-maz@kernel.org
2022-08-12Merge tag 'loongarch-5.20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Optimise getcpu() with vDSO - PCI enablement on top of pci & irqchip changes - Stack unwinder and stack trace support - Some bug fixes and build error fixes - Update the default config file * tag 'loongarch-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: docs/zh_CN/LoongArch: Add I14 description docs/LoongArch: Add I14 description LoongArch: Update Loongson-3 default config file LoongArch: Add USER_STACKTRACE support LoongArch: Add STACKTRACE support LoongArch: Add prologue unwinder support LoongArch: Add guess unwinder support LoongArch: Add vDSO syscall __vdso_getcpu() LoongArch: Add PCI controller support LoongArch: Parse MADT to get multi-processor information LoongArch: Jump to the link address before enable PG LoongArch: Requires __force attributes for any casts LoongArch: Fix unsigned comparison with less than zero LoongArch: Adjust arch/loongarch/Kconfig LoongArch: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
2022-08-12LoongArch: Update Loongson-3 default config fileHuacai Chen
1, Add NVME related options; 2, Add compressed firmware support; 3, Add virtio drivers in order to run in qemu. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-12LoongArch: Add USER_STACKTRACE supportQing Zhang
To get the best stacktrace output, you can compile your userspace programs with frame pointers (at least glibc + the app you are tracing). 1, export "CC = gcc -fno-omit-frame-pointer"; 2, compile your programs with "CC"; 3, use uprobe to get stacktrace output. ... echo 'p:malloc /usr/lib64/libc.so.6:0x0a4704 size=%r4:u64' > uprobe_events echo 'p:free /usr/lib64/libc.so.6:0x0a4d50 ptr=%r4:x64' >> uprobe_events echo 'comm == "demo"' > ./events/uprobes/malloc/filter echo 'comm == "demo"' > ./events/uprobes/free/filter echo 1 > ./options/userstacktrace echo 1 > ./options/sym-userobj ... Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-12LoongArch: Add STACKTRACE supportQing Zhang
1. Use common arch_stack_walk() infrastructure to avoid duplicated code and avoid taking care of the stack storage and filtering. 2. Add sched_ra (means sched return address) and sched_cfa (means sched call frame address) to thread_info, and store them in switch_to(). 3. Add __get_wchan() implementation. Now we can print the process stack and wait channel by cat /proc/*/stack and /proc/*/wchan. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-12LoongArch: Add prologue unwinder supportQing Zhang
It unwind the stack frame based on prologue code analyze. CONFIG_KALLSYMS is needed, at least the address and length of each function. Three stages when we do unwind, 1) unwind_start(), the prapare of unwinding, fill unwind_state. 2) unwind_done(), judge whether the unwind process is finished or not. 3) unwind_next_frame(), unwind the next frame. Dividing unwinder helps to add new unwinders in the future, e.g.: unwinder_frame, unwinder_orc, .etc. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-12LoongArch: Add guess unwinder supportQing Zhang
Name "guess unwinder" comes from x86, it scans the stack and reports every kernel text address it finds. Unwinders can be used by dump_stack() and other stacktrace functions. Three stages when we do unwind, 1) unwind_start(), the prapare of unwinding, fill unwind_state. 2) unwind_done(), judge whether the unwind process is finished or not. 3) unwind_next_frame(), unwind the next frame. Add get_stack_info() to get stack info. At present we have irq stack and task stack. The next_sp is the key info between two types of stacks. Dividing unwinder helps to add new unwinders in the future. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-12LoongArch: Add vDSO syscall __vdso_getcpu()Huacai Chen
We test 20 million times of getcpu(), the real syscall version take 25 seconds, while the vsyscall version take only 2.4 seconds. Signed-off-by: Rui Wang <wangrui@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-12LoongArch: Add PCI controller supportHuacai Chen
Loongson64 based systems are PC-like systems which use PCI/PCIe as its I/O bus, This patch adds the PCI host controller support for LoongArch. Reviewed-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-12LoongArch: Parse MADT to get multi-processor informationHuacai Chen
Parse MADT to get multi-processor information, in order to fix the boot problem and cpu-hotplug problem for SMP platform. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-12LoongArch: Jump to the link address before enable PGHuacai Chen
The kernel entry points of both boot CPU (i.e., kernel_entry) and non- boot CPUs (i.e., smpboot_entry) may be physical address from BootLoader (in DA mode or identity-mapping PG mode). So we should jump to the link address before PG enabled (because DA is disabled at the same time) and just after DMW configured. Specifically: With some older firmwares, non-boot CPUs started with PG enabled, but this need firmware cooperation in the form of a temporary page table, which is deemed unnecessary. OTOH, latest firmware versions configure the non-boot CPUs to start in DA mode, so kernel-side changes are needed. Reviewed-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-12LoongArch: Requires __force attributes for any castsQing Zhang
This fix a warning when "make C=2": arch/loongarch/kernel/ptrace.c: note: in included file (through include/linux/uaccess.h, include/linux/sched/task.h, include/linux/sched/signal.h, include/linux/ptrace.h, include/linux/audit.h): ./arch/loongarch/include/asm/uaccess.h:232:32: warning: incorrect type in argument 2 (different address spaces) ./arch/loongarch/include/asm/uaccess.h:232:32: expected void const *from ./arch/loongarch/include/asm/uaccess.h:232:32: got void const [noderef] __user *from Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-12LoongArch: Fix unsigned comparison with less than zeroYang Li
The return value from the call to get_timer_irq() is int, which can be a negative error code. However, the return value is being assigned to an unsigned int variable 'irq', so making 'irq' an int. Eliminate the following coccicheck warning: ./arch/loongarch/kernel/time.c:146:5-8: WARNING: Unsigned expression compared with zero: irq < 0 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-12LoongArch: Adjust arch/loongarch/KconfigHuacai Chen
1, ACPI, EFI and SMP are mandatories for LoongArch, select them unconditionally to avoid various build errors for 'make randconfig'. 2, Move the MMU_GATHER_MERGE_VMAS selection to the correct place. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-12LoongArch: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACKHuacai Chen
When CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS is selected, cpu_max_bits_warn() generates a runtime warning similar as below while we show /proc/cpuinfo. Fix this by using nr_cpu_ids (the runtime limit) instead of NR_CPUS to iterate CPUs. [ 3.052463] ------------[ cut here ]------------ [ 3.059679] WARNING: CPU: 3 PID: 1 at include/linux/cpumask.h:108 show_cpuinfo+0x5e8/0x5f0 [ 3.070072] Modules linked in: efivarfs autofs4 [ 3.076257] CPU: 0 PID: 1 Comm: systemd Not tainted 5.19-rc5+ #1052 [ 3.084034] Hardware name: Loongson Loongson-3A5000-7A1000-1w-V0.1-CRB/Loongson-LS3A5000-7A1000-1w-EVB-V1.21, BIOS Loongson-UDK2018-V2.0.04082-beta7 04/27 [ 3.099465] Stack : 9000000100157b08 9000000000f18530 9000000000cf846c 9000000100154000 [ 3.109127] 9000000100157a50 0000000000000000 9000000100157a58 9000000000ef7430 [ 3.118774] 90000001001578e8 0000000000000040 0000000000000020 ffffffffffffffff [ 3.128412] 0000000000aaaaaa 1ab25f00eec96a37 900000010021de80 900000000101c890 [ 3.138056] 0000000000000000 0000000000000000 0000000000000000 0000000000aaaaaa [ 3.147711] ffff8000339dc220 0000000000000001 0000000006ab4000 0000000000000000 [ 3.157364] 900000000101c998 0000000000000004 9000000000ef7430 0000000000000000 [ 3.167012] 0000000000000009 000000000000006c 0000000000000000 0000000000000000 [ 3.176641] 9000000000d3de08 9000000001639390 90000000002086d8 00007ffff0080286 [ 3.186260] 00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c [ 3.195868] ... [ 3.199917] Call Trace: [ 3.203941] [<90000000002086d8>] show_stack+0x38/0x14c [ 3.210666] [<9000000000cf846c>] dump_stack_lvl+0x60/0x88 [ 3.217625] [<900000000023d268>] __warn+0xd0/0x100 [ 3.223958] [<9000000000cf3c90>] warn_slowpath_fmt+0x7c/0xcc [ 3.231150] [<9000000000210220>] show_cpuinfo+0x5e8/0x5f0 [ 3.238080] [<90000000004f578c>] seq_read_iter+0x354/0x4b4 [ 3.245098] [<90000000004c2e90>] new_sync_read+0x17c/0x1c4 [ 3.252114] [<90000000004c5174>] vfs_read+0x138/0x1d0 [ 3.258694] [<90000000004c55f8>] ksys_read+0x70/0x100 [ 3.265265] [<9000000000cfde9c>] do_syscall+0x7c/0x94 [ 3.271820] [<9000000000202fe4>] handle_syscall+0xc4/0x160 [ 3.281824] ---[ end trace 8b484262b4b8c24c ]--- Cc: stable@vger.kernel.org Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-08-11Merge 'irq/loongarch', 'pci/ctrl/loongson' and 'pci/header-cleanup-immutable'Huacai Chen
LoongArch architecture changes for 5.20 depend on the irqchip and pci changes to work, so merge them to create a base.
2022-08-08irqchip/loongson-pch-pic: Move find_pch_pic() into CONFIG_ACPIHuacai Chen
MIPS doesn't declare find_pch_pic(), which makes a build warning: >> drivers/irqchip/irq-loongson-pch-pic.c:51:5: warning: no previous prototype for function 'find_pch_pic' [-Wmissing-prototypes] int find_pch_pic(u32 gsi) ^ drivers/irqchip/irq-loongson-pch-pic.c:51:1: note: declare 'static' if the function is not intended to be used outside of this translation unit int find_pch_pic(u32 gsi) ^ static 1 warning generated. Move find_pch_pic() into CONFIG_ACPI which only used by LoongArch to fix the warning. BTW, remove the duplicated declaration of find_pch_pic() in irq.h. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220808093205.3658485-1-chenhuacai@loongson.cn
2022-08-05Merge tag 'mm-stable-2022-08-03' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "Most of the MM queue. A few things are still pending. Liam's maple tree rework didn't make it. This has resulted in a few other minor patch series being held over for next time. Multi-gen LRU still isn't merged as we were waiting for mapletree to stabilize. The current plan is to merge MGLRU into -mm soon and to later reintroduce mapletree, with a view to hopefully getting both into 6.1-rc1. Summary: - The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe Lin, Yang Shi, Anshuman Khandual and Mike Rapoport - Some kmemleak fixes from Patrick Wang and Waiman Long - DAMON updates from SeongJae Park - memcg debug/visibility work from Roman Gushchin - vmalloc speedup from Uladzislau Rezki - more folio conversion work from Matthew Wilcox - enhancements for coherent device memory mapping from Alex Sierra - addition of shared pages tracking and CoW support for fsdax, from Shiyang Ruan - hugetlb optimizations from Mike Kravetz - Mel Gorman has contributed some pagealloc changes to improve latency and realtime behaviour. - mprotect soft-dirty checking has been improved by Peter Xu - Many other singleton patches all over the place" [ XFS merge from hell as per Darrick Wong in https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ] * tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits) tools/testing/selftests/vm/hmm-tests.c: fix build mm: Kconfig: fix typo mm: memory-failure: convert to pr_fmt() mm: use is_zone_movable_page() helper hugetlbfs: fix inaccurate comment in hugetlbfs_statfs() hugetlbfs: cleanup some comments in inode.c hugetlbfs: remove unneeded header file hugetlbfs: remove unneeded hugetlbfs_ops forward declaration hugetlbfs: use helper macro SZ_1{K,M} mm: cleanup is_highmem() mm/hmm: add a test for cross device private faults selftests: add soft-dirty into run_vmtests.sh selftests: soft-dirty: add test for mprotect mm/mprotect: fix soft-dirty check in can_change_pte_writable() mm: memcontrol: fix potential oom_lock recursion deadlock mm/gup.c: fix formatting in check_and_migrate_movable_page() xfs: fail dax mount if reflink is enabled on a partition mm/memcontrol.c: remove the redundant updating of stats_flush_threshold userfaultfd: don't fail on unrecognized features hugetlb_cgroup: fix wrong hugetlb cgroup numa stat ...
2022-08-03Merge tag 'efi-next-for-v5.20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI updates from Ard Biesheuvel: - Enable mirrored memory for arm64 - Fix up several abuses of the efivar API - Refactor the efivar API in preparation for moving the 'business logic' part of it into efivarfs - Enable ACPI PRM on arm64 * tag 'efi-next-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits) ACPI: Move PRM config option under the main ACPI config ACPI: Enable Platform Runtime Mechanism(PRM) support on ARM64 ACPI: PRM: Change handler_addr type to void pointer efi: Simplify arch_efi_call_virt() macro drivers: fix typo in firmware/efi/memmap.c efi: vars: Drop __efivar_entry_iter() helper which is no longer used efi: vars: Use locking version to iterate over efivars linked lists efi: pstore: Omit efivars caching EFI varstore access layer efi: vars: Add thin wrapper around EFI get/set variable interface efi: vars: Don't drop lock in the middle of efivar_init() pstore: Add priv field to pstore_record for backend specific use Input: applespi - avoid efivars API and invoke EFI services directly selftests/kexec: remove broken EFI_VARS secure boot fallback check brcmfmac: Switch to appropriate helper to load EFI variable contents iwlwifi: Switch to proper EFI variable store interface media: atomisp_gmin_platform: stop abusing efivar API efi: efibc: avoid efivar API for setting variables efi: avoid efivars layer when loading SSDTs from variables efi: Correct comment on efi_memmap_alloc memblock: Disable mirror feature if kernelcore is not specified ...
2022-08-02Merge tag 'rcu.2022.07.26a' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU updates from Paul McKenney: - Documentation updates - Miscellaneous fixes - Callback-offload updates, perhaps most notably a new RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be offloaded at boot time, regardless of kernel boot parameters. This is useful to battery-powered systems such as ChromeOS and Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot parameter prevents offloaded callbacks from interfering with real-time workloads and with energy-efficiency mechanisms - Polled grace-period updates, perhaps most notably making these APIs account for both normal and expedited grace periods - Tasks RCU updates, perhaps most notably reducing the CPU overhead of RCU tasks trace grace periods by more than a factor of two on a system with 15,000 tasks. The reduction is expected to increase with the number of tasks, so it seems reasonable to hypothesize that a system with 150,000 tasks might see a 20-fold reduction in CPU overhead - Torture-test updates - Updates that merge RCU's dyntick-idle tracking into context tracking, thus reducing the overhead of transitioning to kernel mode from either idle or nohz_full userspace execution for kernels that track context independently of RCU. This is expected to be helpful primarily for kernels built with CONFIG_NO_HZ_FULL=y * tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (98 commits) rcu: Add irqs-disabled indicator to expedited RCU CPU stall warnings rcu: Diagnose extended sync_rcu_do_polled_gp() loops rcu: Put panic_on_rcu_stall() after expedited RCU CPU stall warnings rcutorture: Test polled expedited grace-period primitives rcu: Add polled expedited grace-period primitives rcutorture: Verify that polled GP API sees synchronous grace periods rcu: Make Tiny RCU grace periods visible to polled APIs rcu: Make polled grace-period API account for expedited grace periods rcu: Switch polled grace-period APIs to ->gp_seq_polled rcu/nocb: Avoid polling when my_rdp->nocb_head_rdp list is empty rcu/nocb: Add option to opt rcuo kthreads out of RT priority rcu: Add nocb_cb_kthread check to rcu_is_callbacks_kthread() rcu/nocb: Add an option to offload all CPUs on boot rcu/nocb: Fix NOCB kthreads spawn failure with rcu_nocb_rdp_deoffload() direct call rcu/nocb: Invert rcu_state.barrier_mutex VS hotplug lock locking order rcu/nocb: Add/del rdp to iterate from rcuog itself rcu/tree: Add comment to describe GP-done condition in fqs loop rcu: Initialize first_gp_fqs at declaration in rcu_gp_fqs() rcu/kvfree: Remove useless monitor_todo flag rcu: Cleanup RCU urgency state for offline CPU ...
2022-08-01Merge tag 'irq-core-2022-08-01' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Updates for interrupt core and drivers: Core: - Fix a few inconsistencies between UP and SMP vs interrupt affinities - Small updates and cleanups all over the place New drivers: - LoongArch interrupt controller - Renesas RZ/G2L interrupt controller Updates: - Hotpath optimization for SiFive PLIC - Workaround for broken PLIC edge triggered interrupts - Simall cleanups and improvements as usual" * tag 'irq-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits) irqchip/mmp: Declare init functions in common header file irqchip/mips-gic: Check the return value of ioremap() in gic_of_init() genirq: Use for_each_action_of_desc in actions_show() irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArch irqchip: Add LoongArch CPU interrupt controller support irqchip: Add Loongson Extended I/O interrupt controller support irqchip/loongson-liointc: Add ACPI init support irqchip/loongson-pch-msi: Add ACPI init support irqchip/loongson-pch-pic: Add ACPI init support irqchip: Add Loongson PCH LPC controller support LoongArch: Prepare to support multiple pch-pic and pch-msi irqdomain LoongArch: Use ACPI_GENERIC_GSI for gsi handling genirq/generic_chip: Export irq_unmap_generic_chip ACPI: irq: Allow acpi_gsi_to_irq() to have an arch-specific fallback APCI: irq: Add support for multiple GSI domains LoongArch: Provisionally add ACPICA data structures irqdomain: Use hwirq_max instead of revmap_size for NOMAP domains irqdomain: Report irq number for NOMAP domains irqchip/gic-v3: Fix comment typo dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/V2L SoC ...
2022-07-29LoongArch: Fix wrong "ROM Size" of boardinfoTiezhu Yang
We can see the "ROM Size" is different in the following outputs: [root@linux loongson]# cat /sys/firmware/loongson/boardinfo BIOS Information Vendor : Loongson Version : vUDK2018-LoongArch-V2.0.pre-beta8 ROM Size : 63 KB Release Date : 06/15/2022 Board Information Manufacturer : Loongson Board Name : Loongson-LS3A5000-7A1000-1w-A2101 Family : LOONGSON64 [root@linux loongson]# dmidecode | head -11 ... Handle 0x0000, DMI type 0, 26 bytes BIOS Information Vendor: Loongson Version: vUDK2018-LoongArch-V2.0.pre-beta8 Release Date: 06/15/2022 ROM Size: 4 MB According to "BIOS Information (Type 0) structure" in the SMBIOS Reference Specification [1], it shows 64K * (n+1) is the size of the physical device containing the BIOS if the size is less than 16M. Additionally, we can see the related code in dmidecode [2]: u64 s = { .l = (code1 + 1) << 6 }; So the output of dmidecode is correct, the output of boardinfo is wrong, fix it. By the way, at present no need to consider the size is 16M or greater on LoongArch, because it is usually 4M or 8M which is enough to use. [1] https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.6.0.pdf [2] https://git.savannah.nongnu.org/cgit/dmidecode.git/tree/dmidecode.c#n347 Fixes: 628c3bb40e9a ("LoongArch: Add boot and setup routines") Reviewed-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-07-29LoongArch: Fix missing fcsr in ptrace's fpr_setQi Hu
In file ptrace.c, function fpr_set does not copy fcsr data from ubuf to kbuf. That's the reason why fcsr cannot be modified by ptrace. This patch fixs this problem and allows users using ptrace to modify the fcsr. Co-developed-by: Xu Li <lixu@loongson.cn> Signed-off-by: Qi Hu <huqi@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-07-29LoongArch: Fix shared cache size calculationHuacai Chen
Current calculation of shared cache size is from the node (die) scope, but we hope 'lscpu' to show the shared cache size of the whole package for multi-die chips (e.g., Loongson-3C5000L, which contains 4 dies in one package). So fix it by multiplying nodes_per_package. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>