| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/dt
ARM: dts: OMAP updates for v6.13
Misc. minor updates for OMAP3, OMAP4, AM3 and DRA7 platforms.
* tag 'omap-for-v6.13/dt-signed-1' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
ARM: dts: omap4-kc1: fix twl6030 power node
ARM: dts: am335x-bone-common: Increase MDIO reset deassert delay to 50ms
ARM: dts: ti/omap: omap4-epson-embt2ws: add charger
ARM: dts: omap36xx: declare 1GHz OPP as turbo again
ARM: ti/omap: omap3-gta04a5: add Bluetooth
ARM: dts: ti/omap: dra7: fix redundant clock divider definition
ARM: dts: ti/omap: use standard node name for twl4030 charger
ARM: dts: omap: omap4-epson-embt2ws: add GPIO expander
ARM: dts: omap: omap4-epson-embt2ws: add unknown gpio outputs
ARM: dts: omap: omap4-epson-embt2ws: wire up regulators
ARM: dts: omap: omap4-epson-embt2ws: define GPIO regulators
ARM: dts: ti: dra7: Remove double include of clock bindings
ARM: dts: ti: omap3434-sdp: drop linux,mtd-name from onenand node
ARM: dts: ti: omap: am335x-baltos: drop "gpmc,device-nand" from NAND node
ARM: dts: ti: drop linux,mtd-name from NAND nodes
ARM: dts: ti/omap: Fix at24 EEPROM node names
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.13 (take two)
- Add a CPU Operating Performance Points table for the RZ/V2H SoC,
- Add Battery Backup Function (VBATTB) and RTC support for the RZ/G3S
SoC and the RZ/G3S SMARC SoM,
- Add DMAC support for MMC on the RZ/A1H SoC and the Genmai
development board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.13-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: rzg3s-smarc-som: Enable RTC
arm64: dts: renesas: rzg3s-smarc-som: Enable VBATTB
arm64: dts: renesas: r9a08g045: Add RTC node
arm64: dts: renesas: r9a08g045: Add VBATTB node
arm64: dts: renesas: white-hawk-cpu-common: Add pin control for DSI-eDP IRQ
ARM: dts: renesas: r7s72100: Add DMA support to MMCIF
ARM: dts: renesas: r7s72100: Add DMAC node
arm64: dts: renesas: hihope: Drop #sound-dai-cells
dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB
dt-bindings: clock: r9a08g045-cpg: Add power domain ID for RTC
arm64: dts: renesas: r9a09g057: Add OPP table
Link: https://lore.kernel.org/r/cover.1730726155.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree changes for 6.13:
- New device support: Kobo Clara 2E, Comvetia LXR board, i.MX6DL DHCOM
SoM on PDK2 carrier
- A bunch of dt-schema warning fixes from Fabio Estevam
- A set of changes from Hiago De Franco to update audio card for Apalis
and Colibri devices
- A series from Marek Vasut to improve pin config nodes according to
bindings
- A couple of changes from Sean Nyekjaer to add DMA support i.MX6UL
UART ports
- Other small and random changes
* tag 'imx-dt-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (39 commits)
ARM: dts: imx: Add devicetree for Kobo Clara 2E
ARM: dts: imx6sll: Improve gpc description
ARM: dts: imx6sl: Pass tempmon #thermal-sensor-cells
ARM: dts: imx6sx: Fix tempmon description
ARM: dts: imx6sll: Remove regulator-3p0 unit address
ARM: dts: imx6sll: Fix the last SPDIF clock name
ARM: dts: imx7ulp: Remove incorrect mmc fallback compatible
ARM: dts: imx6sl: Remove incorrect mmc fallback compatible
ARM: dts: imx6sx: Remove incorrect mmc fallback compatible
ARM: dts: imx6sl/sll: Add the "fsl,imx6dl-gpt" fallback
ARM: dts: imx6ul: Drop duplicate space in iomux node groups
ARM: dts: imx6sx: Align pin config nodes with bindings
ARM: dts: imx6sl: imx6sll: Align pin config nodes with bindings
ARM: dts: imx6qp: Align pin config nodes with bindings
ARM: dts: imx6qdl: Align pin config nodes with bindings
ARM: dts: imx6q: Align pin config nodes with bindings
ARM: dts: imx6dl: Align pin config nodes with bindings
ARM: dts: imx53: Align pin config nodes with bindings
ARM: dts: imx51: Align pin config nodes with bindings
ARM: dts: imx50: Align pin config nodes with bindings
...
Link: https://lore.kernel.org/r/20241104090055.1881860-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm32 DeviceTree updates for v6.13
IPQ4019 flash partition scheme is moved to nvmem-layout. SDX55 and SDX65
PCIe EP controllers gain missing linux,pci-domain properties.
Stylistic improvements across a range of platforms and devices.
* tag 'qcom-arm32-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: ipq4019: use nvmem-layout
ARM: dts: qcom: change labels to lower-case
ARM: dts: qcom: sdx65: Add 'linux,pci-domain' to PCIe EP controller node
ARM: dts: qcom: sdx55: Add 'linux,pci-domain' to PCIe EP controller node
ARM: dts: qcom: minor whitespace cleanup
ARM: dts: qcom: drop underscore in node names
Link: https://lore.kernel.org/r/20241104034744.14378-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt
SoCFPGA DTS updates for v6.13
- Fix dts warning for at24 EEPROM node names
* tag 'socfpga_dts_updates_for_v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: socfpga: Fix at24 EEPROM node names
Link: https://lore.kernel.org/r/20241101190046.912598-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into soc/dt
Ux500 DTS file updates for the v6.13 kernel cycle:
- Add touchkeys to the Samsung Codina variants
- Re-work the Codina device tree for eMMC
* tag 'ux500-dts-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: Reconfigure the MC2 eMMC interface
ARM: dts: ux500: Add touchkeys to Codinas
Link: https://lore.kernel.org/r/CACRpkda5rix2JLYpexXTeGqKBcHeWxZx7A49jYCCmDPU7CFLSA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.13
- Add support for PCIe on the R-Car V4M SoC and the Gray Hawk
development board,
- Add support for watchdog, OS timer, keyboard switch, SDHI, and MMCIF
on the Genmai development board,
- Add support for watchdog on the RSK+RZA1 development board,
- Add support for QSPI NOR FLASH on the RZ/G2UL SMARC SoM,
- Add support for E-FUSE on the R-Car V3U, S4-8, V4H, and V4M SoCs,
- Use interrupts-extended where it makes sense,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.13-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (53 commits)
arm64: dts: renesas: rzg3s-smarc: Use interrupts-extended for gpio-keys
arm64: dts: renesas: beacon-renesom: Use interrupts-extended for touchscreen
arm64: dts: renesas: Use interrupts-extended for WLAN
arm64: dts: renesas: Use interrupts-extended for video decoders
arm64: dts: renesas: Use interrupts-extended for USB muxes
arm64: dts: renesas: Use interrupts-extended for PMICs
arm64: dts: renesas: Use interrupts-extended for I/O expanders
arm64: dts: renesas: Use interrupts-extended for HDMI bridges
arm64: dts: renesas: Use interrupts-extended for Ethernet PHYs
arm64: dts: renesas: Use interrupts-extended for DisplayPort bridges
ARM: dts: renesas: kzm9g: Use interrupts-extended for sensors
ARM: dts: renesas: kzm9g: Use interrupts-extended for I/O expander
ARM: dts: renesas: r8a7742-iwg21m: Use interrupts-extended for RTC
ARM: dts: renesas: iwg22d-sodimm: Use interrupts-extended for port expander
ARM: dts: renesas: Use interrupts-extended for video decoders
ARM: dts: renesas: Use interrupts-extended for touchpanels
ARM: dts: renesas: Use interrupts-extended for PMICs
ARM: dts: renesas: Use interrupts-extended for HDMI bridges
ARM: dts: renesas: Use interrupts-extended for Ethernet PHYs
ARM: dts: renesas: Use interrupts-extended for Ethernet MACs
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
VFP_bounce() is invoked from within vfp_support_entry() and may send a
signal. Sending a signal uses spinlock_t which becomes a sleeping lock
on PREEMPT_RT and must not be acquired within a preempt-disabled
section.
Move the vfp_raise_sigfpe() block outside of the vfp_state_hold() section.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
vfp_entry() is invoked from exception handler and is fully preemptible.
It uses local_bh_disable() to remain uninterrupted while checking the
VFP state.
This is not working on PREEMPT_RT because local_bh_disable()
synchronizes the relevant section but the context remains fully
preemptible.
Use vfp_state_hold() for uninterrupted access.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
vfp_sync_hwstate() uses preempt_disable() followed by local_bh_disable()
to ensure that it won't get interrupted while checking the VFP state.
This harms PREEMPT_RT because softirq handling can get preempted and
local_bh_disable() synchronizes the related section with a sleeping lock
which does not work with disabled preemption.
Use the vfp_state_hold() to synchronize the access.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
kernel_neon_begin() uses local_bh_disable() to ensure exclusive access
to the VFP unit. This is broken on PREEMPT_RT because a BH disabled
section remains preemptible on PREEMPT_RT.
Introduce vfp_state_hold() which uses local_bh_disable() and
preempt_disable() on PREEMPT_RT. Since softirqs are processed always in
thread context, disabling preemption is enough to ensure that the
current context won't get interrupted by something that is using the
VFP. Use it in kernel_neon_begin().
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Fix the physical address calculation of the following to get smp working
on xip kernels.
- secondary_data needed for secondary cpu bootup.
- secondary_startup address passed through psci.
- identity mapped code region needed for enabling mmu for secondary cpus.
Signed-off-by: Harith George <harith.g@alifsemi.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
The patchset introducing kernel_sec_start/end variables to separate the
kernel/lowmem memory mappings, broke the mapping of the kernel memory
for xipkernels.
kernel_sec_start/end variables are in RO area before the MMU is switched
on for xipkernels.
So these cannot be set early in boot in head.S. Fix this by setting these
after MMU is switched on.
xipkernels need two different mappings for kernel text (starting at
CONFIG_XIP_PHYS_ADDR) and data (starting at CONFIG_PHYS_OFFSET).
Also, move the kernel code mapping from devicemaps_init() to map_kernel().
Fixes: a91da5457085 ("ARM: 9089/1: Define kernel physical section start and end")
Signed-off-by: Harith George <harith.g@alifsemi.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Remove the use of contractions and use proper punctuation in #error
directive messages that discourage the direct inclusion of header files.
Link: https://lkml.kernel.org/r/20241105032231.28833-1-natanielfarzan@gmail.com
Signed-off-by: Nataniel Farzan <natanielfarzan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The preferred nodename for fixed-regulators has changed to
pattern: '^regulator(-[0-9]+v[0-9]+|-[0-9a-z-]+)?$'
Fix all Rockchip DT regulator nodenames.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/cfc3cfe1-086b-48f1-9b89-f17c9391d3cc@gmail.com
[Also include the backlight-regulator and panel-regulator from
rk3288-veyron-edp, and adapt the Pinky device accordingly]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Several architectures support text patching, but they name the header
files that declare patching functions differently.
Make all such headers consistently named text-patching.h and add an empty
header in asm-generic for architectures that do not support text patching.
Link: https://lkml.kernel.org/r/20241023162711.2579610-4-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Tested-by: kdevops <kdevops@lists.linux.dev>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Song Liu <song@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add the four syscalls setxattrat(), getxattrat(), listxattrat() and
removexattrat(). Those can be used to operate on extended attributes,
especially security related ones, either relative to a pinned directory
or on a file descriptor without read access, avoiding a
/proc/<pid>/fd/<fd> detour, requiring a mounted procfs.
One use case will be setfiles(8) setting SELinux file contexts
("security.selinux") without race conditions and without a file
descriptor opened with read access requiring SELinux read permission.
Use the do_{name}at() pattern from fs/open.c.
Pass the value of the extended attribute, its length, and for
setxattrat(2) the command (XATTR_CREATE or XATTR_REPLACE) via an added
struct xattr_args to not exceed six syscall arguments and not
merging the AT_* and XATTR_* flags.
[AV: fixes by Christian Brauner folded in, the entire thing rebased on
top of {filename,file}_...xattr() primitives, treatment of empty
pathnames regularized. As the result, AT_EMPTY_PATH+NULL handling
is cheap, so f...(2) can use it]
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Link: https://lore.kernel.org/r/20240426162042.191916-1-cgoettsche@seltendoof.de
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
CC: x86@kernel.org
CC: linux-alpha@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
CC: linux-ia64@vger.kernel.org
CC: linux-m68k@lists.linux-m68k.org
CC: linux-mips@vger.kernel.org
CC: linux-parisc@vger.kernel.org
CC: linuxppc-dev@lists.ozlabs.org
CC: linux-s390@vger.kernel.org
CC: linux-sh@vger.kernel.org
CC: sparclinux@vger.kernel.org
CC: linux-fsdevel@vger.kernel.org
CC: audit@vger.kernel.org
CC: linux-arch@vger.kernel.org
CC: linux-api@vger.kernel.org
CC: linux-security-module@vger.kernel.org
CC: selinux@vger.kernel.org
[brauner: slight tweaks]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Allwinner suniv boards' DT files were accidentally duplicated
in the Makefile when they were moved to the new directory
structure. Remove these duplicates for code cleanness.
Fixes: 724ba6751532 ("ARM: dts: Move .dts files to vendor sub-directories")
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20241104230628.3736186-1-csokas.bence@prolan.hu
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
In do_adjust_pte(), we may modify the pte entry. The corresponding pmd
entry may have been modified concurrently. Therefore, in order to ensure
the stability if pmd entry, use pte_offset_map_rw_nolock() to replace
pte_offset_map_nolock(), and do pmd_same() check after holding the PTL.
All callers of update_mmu_cache_range() hold the vmf->ptl, so we can
determined whether split PTE locks is being used by doing the following,
just as we do elsewhere in the kernel.
ptl != vmf->ptl
And then we can delete the do_pte_lock() and do_pte_unlock().
Link: https://lkml.kernel.org/r/0eaf6b69aeb2fe35092a633fed12537efe645303.1727332572.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add device tree file for sam9x75 curiosity board.
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Reviewed-by: Hari Prasath Gujulan Elango <hari.prasathge@microchip.com>
Link: https://lore.kernel.org/r/20241010120444.93252-1-varshini.rajendran@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add device tree file for SAM9X7 SoC family.
Co-developed-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20241010120432.93151-1-varshini.rajendran@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
To avoid duplication of inline asm between C and Rust, we need to
import the inline asm from the relevant `jump_label.h` header into Rust.
To make that easier, this patch updates the header files to expose the
inline asm via a new ARCH_STATIC_BRANCH_ASM macro.
The header files are all updated to define a ARCH_STATIC_BRANCH_ASM that
takes the same arguments in a consistent order so that Rust can use the
same logic for every architecture.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: " =?utf-8?q?Bj=C3=B6rn_Roy_Baron?= " <bjorn3_gh@protonmail.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Anup Patel <apatel@ventanamicro.com>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Conor Dooley <conor.dooley@microchip.com>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tianrui Zhao <zhaotianrui@loongson.cn>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/20241030-tracepoint-v12-4-eec7f0f8ad22@google.com
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Co-developed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com> # RISC-V
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
dtbs_check was moaning about twl6030-power, use the standard property
instead.
Apparently that twl6030 power snippet slipped in without the
corresponding driver. Now it is handled by the standard property.
CC: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Paul Kocialkowski <contact@paulk.fr>
Link: https://lore.kernel.org/r/20240915193527.1071792-1-andreas@kemnade.info
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Commit b9bf5612610aa7e3 ("ARM: dts: am335x-bone-common: Increase MDIO
reset deassert time") already increased the MDIO reset deassert delay
from 6.5 to 13 ms, but this may still cause Ethernet PHY probe failures:
SMSC LAN8710/LAN8720 4a101000.mdio:00: probe with driver SMSC LAN8710/LAN8720 failed with error -5
On BeagleBone Black Rev. C3, ETH_RESETn is controlled by an open-drain
AND gate. It is pulled high by a 10K resistor, and has a 4.7µF
capacitor to ground, giving an RC time constant of 47ms. As it takes
0.7RC to charge the capacitor above the threshold voltage of a CMOS
input (VDD/2), the delay should be at least 33ms. Considering the
typical tolerance of 20% on capacitors, 40ms would be safer. Add an
additional safety margin and settle for 50ms.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/9002a58daa1b2983f39815b748ee9d2f8dcc4829.1730366936.git.geert+renesas@glider.be
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
When global LED brightness is changed by pressing the front button on
Turris Omnia, the MCU can produce an interrupt to the CPU. Add the
description of this interrupt to the LED controller node.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
at24.yaml defines the node name for at24 EEPROMs as 'eeprom'.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Enable drivers used on Kobo Clara 2E
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Adds a devicetree for the Kobo Clara 2E Ebook reader. It is based
on boards marked with "37NB-E60K2M+4A2" or "37NB-E60K2M+4B0". It is
equipped with an i.MX6SLL SoC.
Expected to work:
- Buttons
- Wifi
- Bluetooth
(if Wifi is initialized first, driver does not handle regulators
yet)
- LED
- uSD
- USB
- RTC
- Touchscreen
Add human-readable comments for devices without mainlined driver and
binding. Such comments can e.g. be help to find testers if someone
starts to work on the missing drivers.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add DMA properties to the device node for the MMC Host Interface.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241015224801.2535-6-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add a device node for the Direct Memory Access Controller on the RZ/A1H
SoC.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241015224801.2535-5-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
vdso/datapage.h provides a hidden declaration for _vdso_data.
When using it the compiler will automatically generate PC-relative
accesses which avoids the need for a custom assembly-based accessor.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-7-b64f0842d512@linutronix.de
|
|
According to fsl,imx-gpc.yaml, 'clocks', 'clock-names', and 'pgc'
are required properties.
Describe them to fix the following dt-schema warnings:
interrupt-controller@20dc000: 'clocks' is a required property
interrupt-controller@20dc000: 'clock-names' is a required property
interrupt-controller@20dc000: 'pgc' is a required property
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to fsl,imx-anatop.yaml, #thermal-sensor-cells is a required
property.
Add it to fix the following dt-schema warning:
tempmon: '#thermal-sensor-cells' is a required property
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to imx-thermal.yaml, the valid compatible string
for i.MX6SX is just: compatible = "fsl,imx6sx-tempmon".
Also pass #thermal-sensor-cells = <0> as it is a required property.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to imx-thermal.yaml, the anatop regulators should not
contain unit-address/reg entries.
Change it accordingly.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The last SPDIF clock is IMX6SLL_CLK_SPBA, so change the last
clock-name entry to 'spba' as expected by fsl,spdif.yaml.
This fixes the following dt-schema warning:
spdif@2004000: clock-names:9: 'spba' was expected
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into HEAD
A number of DTS correctnes fixes, to bring down the amount of errors
reported by dtbscheck.
* tag 'v6.12-rockchip-dtsfixes1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (23 commits)
arm64: dts: rockchip: Correct GPIO polarity on brcm BT nodes
arm64: dts: rockchip: Drop invalid clock-names from es8388 codec nodes
ARM: dts: rockchip: Fix the realtek audio codec on rk3036-kylin
ARM: dts: rockchip: Fix the spi controller on rk3036
ARM: dts: rockchip: drop grf reference from rk3036 hdmi
ARM: dts: rockchip: fix rk3036 acodec node
arm64: dts: rockchip: remove orphaned pinctrl-names from pinephone pro
arm64: dts: rockchip: remove num-slots property from rk3328-nanopi-r2s-plus
arm64: dts: rockchip: Fix LED triggers on rk3308-roc-cc
arm64: dts: rockchip: Remove #cooling-cells from fan on Theobroma lion
arm64: dts: rockchip: Remove undocumented supports-emmc property
arm64: dts: rockchip: Fix bluetooth properties on Rock960 boards
arm64: dts: rockchip: Fix bluetooth properties on rk3566 box demo
arm64: dts: rockchip: Drop regulator-init-microvolt from two boards
arm64: dts: rockchip: fix i2c2 pinctrl-names property on anbernic-rg353p/v
arm64: dts: rockchip: Fix reset-gpios property on brcm BT nodes
arm64: dts: rockchip: Fix wakeup prop names on PineNote BT node
arm64: dts: rockchip: Remove hdmi's 2nd interrupt on rk3328
arm64: dts: rockchip: Designate Turing RK1's system power controller
arm64: dts: rockchip: Start cooling maps numbering from zero on ROCK 5B
...
Link: https://lore.kernel.org/r/2847150.mvXUDI8C0e@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Per fsl-imx-esdhc.yaml, the correct compatible string for i.MX7ULP is:
compatible = "fsl,imx7ulp-usdhc"
Remove the undocumented "fsl,imx6sx-usdhc" fallback compatible.
This fixes the following dt-schema warnings:
mmc@2198000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6sl-usdhc', 'fsl,imx6q-usdhc'] is too long
['fsl,imx6sl-usdhc', 'fsl,imx6q-usdhc'] is too short
'fsl,imx50-esdhc' was expected
...
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Per fsl-imx-esdhc.yaml, the correct compatible string for i.MX6SL is:
compatible = "fsl,imx6sl-usdhc"
Remove the undocumented "fsl,imx6q-usdhc" fallback compatible.
This fixes the following dt-schema warnings:
mmc@2190000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6sl-usdhc', 'fsl,imx6q-usdhc'] is too long
['fsl,imx6sl-usdhc', 'fsl,imx6q-usdhc'] is too short
'fsl,imx50-esdhc' was expected
...
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Per fsl-imx-esdhc.yaml, the correct compatible string for i.MX6SX is:
compatible = "fsl,imx6sx-usdhc"
Remove the undocumented "fsl,imx6sl-usdhc" fallback compatible.
This fixes the following dt-schema warnings:
mmc@2198000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6sl-usdhc', 'fsl,imx6q-usdhc'] is too long
['fsl,imx6sl-usdhc', 'fsl,imx6q-usdhc'] is too short
'fsl,imx50-esdhc' was expected
...
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Per fsl,imxgpt.yaml, the i.MX6SL GPT compatible should be described as:
compatible = "fsl,imx6sl-gpt", "fsl,imx6dl-gpt";
Do as suggested to fix the following dt-schema warnings:
timer@2098000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6sl-gpt'] is too short
'fsl,imx1-gpt' was expected
'fsl,imx21-gpt' was expected
'fsl,imx27-gpt' was expected
'fsl,imx31-gpt' was expected
'fsl,imx6sl-gpt' is not one of ['fsl,imx25-gpt', 'fsl,imx50-gpt', 'fsl,imx51-gpt', 'fsl,imx53-gpt', 'fsl,imx6q-gpt']
'fsl,imx6dl-gpt' was expected
'fsl,imx6sl-gpt' is not one of ['fsl,imx6ul-gpt', 'fsl,imx7d-gpt']
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Drop space between node name and opening brace {.
No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx6q-mba6
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
