summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts
AgeCommit message (Collapse)Author
2023-08-12Merge tag 'samsung-dt64-6.6' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt Samsung DTS ARM64 changes for v6.6 1. Add dedicated compatibles for PWM block. 2. Add PWM to ExynosAutov9 SADK board. 3. Few white-space and other cleanups. * tag 'samsung-dt64-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: exynos5433-tm2: drop redundant status=okay arm64: dts: exynos: add pwm node for exynosautov9-sadk dt-bindings: pwm: samsung: add exynosautov9 compatible arm64: dts: fsd: minor whitespace cleanup around '=' arm64: dts: exynos: minor whitespace cleanup around '=' arm64: dts: exynos: add missing space before { Link: https://lore.kernel.org/r/20230810151250.220202-2-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-12Merge tag 'sunxi-dt-for-6.6-1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt - Add D1 GPADC node - Introduce support for OrangePi Zero 3 SBC - Enable DT overlay support for Allwinner H3 boards * tag 'sunxi-dt-for-6.6-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm: dts: Enable device-tree overlay support for sun8i-h3 pi devices arm64: dts: allwinner: h616: Add OrangePi Zero 3 board support dt-bindings: arm: sunxi: document Orange Pi Zero 3 board name arm64: dts: allwinner: h616: Split Orange Pi Zero 2 DT riscv: dts: allwinner: d1: Add GPADC node Link: https://lore.kernel.org/r/20230806180546.GA127039@jernej-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-12arm64: dts: mediatek: Fix "status" valuesRob Herring
The defined value for "status" is "disabled", not "disable". Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230804225813.12493-1-robh@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-12Merge tag 'amlogic-arm64-dt-for-v6.6' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt Amlogic ARM64 DT changes for v6.6: - Add initial support for A311D2 - Add AN400 board - Add gpio_intc, power domain for C3 SoC - Again some DT bindings fixes & cleanups * tag 'amlogic-arm64-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: dts: amlogic: drop cooling-[min|max]-state from pwm-fan arm64: dts: amlogic: meson-g12-common: change aobus-pinctrl node name arm64: dts: amlogic: meson-g12b-odroid-n2: fix usb hub hog name arm64: dts: amlogic: drop redundant status=okay in sound nodes arm64: dts: amlogic: meson-g12b-bananapi: switch to enable-gpios arm64: dts: add support for C3 power domain controller arm64: dts: Add gpio_intc node and pinctrl node for Amlogic C3 SoCs arm64: dts: add board AN400 dt-bindings: arm: amlogic: add board AN400 arm64: dts: amlogic: minor whitespace cleanup around '=' arm64: dts: amlogic-t7-a311d2-khadas-vim4: add initial device-tree dt-bindings: arm: amlogic: add Amlogic A311D2 bindings Link: https://lore.kernel.org/r/d5f95654-ebcd-bd37-02f9-840e50b17e44@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-12Merge tag 'juno-update-6.6' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/dt Armv8 Juno/FVP update for v6.6 Just a single minor whitespace cleanup in couple of FVP device trees. * tag 'juno-update-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: arm: minor whitespace cleanup around '=' Link: https://lore.kernel.org/r/20230804123223.3258086-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-12Merge tag 'zynqmp-dt-for-6.6' of https://github.com/Xilinx/linux-xlnx into ↵Arnd Bergmann
soc/dt arm64: ZynqMP DT changes for v6.6 - Describe caches - Fix i2c gpio recovery description - Setting up default i2c frequency - Describe GEM TSU clock and assigned rates for SOMs - Reserved 1MB for internal firmware usage - Fix dwc3 IRQ description - Describe interrupts by using macros * tag 'zynqmp-dt-for-6.6' of https://github.com/Xilinx/linux-xlnx: arm64: zynqmp: Describe interrupts by using macros arm64: zynqmp: Fix dwc3 usb interrupt description arm64: zynqmp: Add memory reserved node for k26 Kria SOM board arm64: zynqmp: Assign TSU clock frequency for GEMs arm64: zynqmp: Setting default i2c clock frequency to 400kHz arm64: zynqmp: Fix open drain warning on ZynqMP arm64: zynqmp: Add L2 cache nodes Link: https://lore.kernel.org/r/fde6d7b4-c751-219d-3ec5-04e5bad2aa17@monstr.eu Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-12Merge tag 'hisi-arm64-dt-for-6.6' of https://github.com/hisilicon/linux-hisi ↵Arnd Bergmann
into soc/dt ARM64: DT: HiSilicon ARM64 DT updates for v6.6 - Miscellaneous fixes according the DTS coding style - Correct the clocks order of the sd0 for the hi3798cv200 * tag 'hisi-arm64-dt-for-6.6' of https://github.com/hisilicon/linux-hisi: arm64: dts: hi3798cv200: Fix clocks order of sd0 arm64: dts: hisilicon: add missing space before { arm64: dts: hisilicon: minor whitespace cleanup around '=' Link: https://lore.kernel.org/r/64CC99A3.5030701@hisilicon.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-12Merge tag 'microchip-dt64-6.6' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt Microchip ARM64 device tree updates for 6.6 It contains: - one cleanup patch that removes whitespaces around '=' * tag 'microchip-dt64-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: arm64: dts: microchip: minor whitespace cleanup around '=' Link: https://lore.kernel.org/r/20230804044132.231508-1-claudiu.beznea@tuxon.dev Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-12Merge tag 'renesas-dts-for-v6.6-tag1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DTS updates for v6.6 - Add Clocked Serial Interface (CSI) support for the RZ/V2M SoC, - Add PMIC, RTC, and PWM support for the RZ/G2L, RZ/G2LC, and RZ/V2L SMARC EVK development boards, - Add PWM (MTU3a) support for the RZ/G2UL and RZ/Five SoCs, - Add External interrupt (INTC-EX) support for the R-Car S4-8 SoC, - Add LED support for the Spider development board, - Miscellaneous fixes and improvements. * tag 'renesas-dts-for-v6.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: spider-cpu: Add GP LEDs arm64: dts: renesas: r8a779f0: Add INTC-EX node arm64: dts: renesas: rzg2ul-smarc: Add support for enabling MTU3 arm64: dts: renesas: r9a07g043: Add MTU3a node ARM dts: renesas: armadillo800eva: Switch to enable-gpios arm64: dts: renesas: rzg2lc-smarc-som: Enable PMIC and built-in RTC arm64: dts: renesas: rzg2lc-smarc-som: Add PHY interrupt support for ETH0 riscv: dts: renesas: Clean up dtbs_check W=1 warning due to empty phy node arm64: dts: renesas: rzg2lc-smarc: Add support for enabling MTU3 arm64: dts: renesas: rzg2l-smarc: Add support for enabling MTU3 arm64: dts: renesas: Add missing space before { ARM: dts: renesas: Add missing space before { arm64: dts: renesas: Minor whitespace cleanup around '=' arm64: dts: renesas: rzg2l-smarc-som: Enable PMIC and built-in RTC arm64: dts: renesas: r9a09g011: Add CSI nodes arm64: dts: renesas: rzg2l: Fix txdv-skew-psec typos arm64: dts: renesas: rzg2l: Update overfow/underflow IRQ names for MTU3 channels Link: https://lore.kernel.org/r/cover.1690545144.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-12Merge tag 'imx-fixes-6.5-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.5, 2nd round: - Fix i.MX93 ANATOP 'reg' resource size to avoid overlapping with TMU memory area. - Fix RTC interrupt level on imx6qdl-phytec-mira board. - Remove LDB endpoint from from the common imx6sx.dtsi as it causes regression for boards that has the LCDIF connected directly to a parallel display. - Drop CSI1 PHY reference clock configuration from i.MX8MM/N device tree to avoid overclocking. - Set a proper default tuning step for i.MX6SX and i.MX7D uSDHC to fix a tuning failure seen with some SD cards. * tag 'imx-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx93: Fix anatop node size ARM: dts: imx: Set default tuning step for imx6sx usdhc arm64: dts: imx8mm: Drop CSI1 PHY reference clock configuration arm64: dts: imx8mn: Drop CSI1 PHY reference clock configuration ARM: dts: imx: Set default tuning step for imx7d usdhc ARM: dts: imx6: phytec: fix RTC interrupt level ARM: dts: imx6sx: Remove LDB endpoint Link: https://lore.kernel.org/r/20230809100034.GS151430@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-08-12arm64: dts: imx8mq-librem5-devkit: Drop power-supplyGuido Günther
It's not a valid binding. Instead move the sdio_rst line to the power sequence and use w_disable1 as the vmmc-supply bringing it more in line with other SDIO M2 cards. Resolves following warning: arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dtb: mmc@30b50000: Unevaluated properties are not allowed ('power-supply' was unexpected) from schema $id: http://devicetree.org/schemas/mmc/fsl-imx-esdhc.yaml# Reported-by: David Heidelberg <david@ixit.cz> Signed-off-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-12arm64: dts: imx8mq-librem5-devkit: Mark buck2 as always onGuido Günther
Otherwise the A53 cores are shut down which doesn't end well. Reported-by: David Heidelberg <david@ixit.cz> Tested-by: David Heidelberg <david@ixit.cz> Signed-off-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11arm64: dts: ti: Add support for the AM62P5 Starter KitBryan Brattlof
Add basic support for the AM62P5 SK with UART console and ramdisk as rootfs. Schematics is at https://www.ti.com/lit/zip/sprr487 Signed-off-by: Bryan Brattlof <bb@ti.com> Acked-by: Andrew Davis <afd@ti.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20230811184432.732215-4-vigneshr@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-11arm64: dts: ti: Introduce AM62P5 family of SoCsBryan Brattlof
The AM62Px is an extension of the existing Sitara AM62x low-cost family of application processors built for Automotive and Linux Application development. Scalable Arm Cortex-A53 performance and embedded features, such as: multi high-definition display support, 3D-graphics acceleration, 4K video acceleration, and extensive peripherals make the AM62Px well-suited for a broad range of automation and industrial application, including automotive digital instrumentation, automotive displays, industrial HMI, and more. Some highlights of AM62P SoC are: * Quad-Cortex-A53s (running up to 1.4GHz) in a single cluster. Dual/Single core variants are provided in the same package to allow HW compatible designs. * One Device manager Cortext-R5F for system power and resource management, and one Cortex-R5F for Functional Safety or general-purpose usage. * One 3D GPU up to 50 GLFOPS * H.264/H.265 Video Encode/Decode. * Display support: 3x display support over OLDI/LVDS (1x OLDI-DL, 1x or 2x OLDI-SL), DSI, or DPI. Up to 3840x1080@60fps resolution * Integrated Giga-bit Ethernet switch supporting up to a total of two external ports (TSN capable). * 9xUARTs, 5xSPI, 6xI2C, 2xUSB2, 3xCAN-FD, 3xMMC and SD, GPMC for NAND/FPGA connection, OSPI memory controller, 3xMcASP for audio, 1xCSI-RX-4L for Camera, eCAP/eQEP, ePWM, among other peripherals. * Dedicated Centralized Hardware Security Module with support for secure boot, debug security and crypto acceleration and trusted execution environment. * One 32-bit DDR Subsystem that supports LPDDR4, DDR4 memory types. * Multiple low power modes support, ex: Deep sleep, Standby, MCU-only, enabling battery powered system design. For those interested, more details about this SoC can be found in the Technical Reference Manual here: https://www.ti.com/lit/pdf/spruj83 Signed-off-by: Bryan Brattlof <bb@ti.com> Acked-by: Andrew Davis <afd@ti.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20230811184432.732215-3-vigneshr@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-11arm64: dts: ti: k3-am69-sk: Add phase tags markingApurva Nandan
bootph-all as phase tag was added to dt-schema (dtschema/schemas/bootph.yaml) to cover U-Boot challenges with DT. That's why add it also to Linux to be aligned with bootloader requirement. wkup_i2c0, mcu_uart0, main_uart8, main_sdhci0 and main_sdhci1 are required for bootloader operation on TI K3 AM69-SK EVM. These IPs along with pinmuxes need to be marked for all bootloader phases, hence add bootph-all to these nodes in kernel dts. Signed-off-by: Apurva Nandan <a-nandan@ti.com> Reviewed-by: Udit Kumar <u-kumar1@ti.com> Link: https://lore.kernel.org/r/20230811192030.3480616-4-a-nandan@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-11arm64: dts: ti: k3-j784s4-evm: Add phase tags markingApurva Nandan
bootph-all as phase tag was added to dt-schema (dtschema/schemas/bootph.yaml) to cover U-Boot challenges with DT. That's why add it also to Linux to be aligned with bootloader requirement. wkup_i2c0, mcu_uart0, main_uart8, fss, ospi0, ospi1, main_sdhci0 and main_sdhci1 are required for bootloader operation on TI K3 J784S4 EVM. These IPs along with pinmuxes need to be marked for all bootloader phases, hence add bootph-all to these nodes in kernel dts. Signed-off-by: Apurva Nandan <a-nandan@ti.com> Reviewed-by: Udit Kumar <u-kumar1@ti.com> Link: https://lore.kernel.org/r/20230811192030.3480616-3-a-nandan@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-11arm64: dts: ti: k3-j784s4: Add phase tags markingApurva Nandan
bootph-all as phase tag was added to dt-schema (dtschema/schemas/bootph.yaml) to cover U-Boot challenges with DT. That's why add it also to Linux to be aligned with bootloader requirement. On TI K3 J784S4 SoC, only secure_proxy_mcu and secure_proxy_sa3 nodes are exclusively used by R5 bootloader, rest of the dts nodes with bootph-* are used by later boot stages also. And secure_proxy_mcu and secure_proxy_sa3 are disabled in kernel device tree, and will be only enabled in R5 bootloader device tree. So, bootph-pre-ram for secure_proxy_mcu and secure_proxy_sa3 will be added in R5 bootloader device tree only. Add bootph-all for all other nodes that are used in the bootloader on K3 J784S4 SoC, and bootph-pre-ram is not needed specifically for any node in kernel dts. Signed-off-by: Apurva Nandan <a-nandan@ti.com> Reviewed-by: Udit Kumar <u-kumar1@ti.com> Link: https://lore.kernel.org/r/20230811192030.3480616-2-a-nandan@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-11arm64: dts: ti: k3-am625-beagleplay: Add HDMI supportNishanth Menon
The DSS outputs DPI signals via its second video port (VP2). The DPI output from DSS is 24 bits (RGB888) and is forwarded to an HDMI transmitter (ITE-IT66121) on the BeaglePlay platform. For audio output, BeaglePlay uses mcasp1. Add pinmux info for DSS DPI signals. Further, add support for HDMI audio and video output. Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Link: https://lore.kernel.org/r/20230809084559.17322-6-a-bhatia1@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-11arm64: dts: ti: am62x-sk: Add overlay for HDMI audioJai Luthra
Enable audio output over HDMI instead of the 3.5mm jack. A FET switch (U65) on the EVM muxes serial audio lines coming from McASP between the codec (tlv320aic3106) and the HDMI bridge (sii9022). By default it uses the codec, but it can be toggled to use the HDMI bridge by shorting a (J24) header on the board. Signed-off-by: Jai Luthra <j-luthra@ti.com> [a-bhatia1: Cosmetic changes] Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Link: https://lore.kernel.org/r/20230809084559.17322-5-a-bhatia1@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-11arm64: dts: ti: k3-am62x-sk-common: Add HDMI supportAradhya Bhatia
The DSS outputs DPI signals via its second video port (VP2). The DPI output from DSS is 24 bits (RGB888) and is forwarded to an HDMI transmitter (SIL9022) on the board. Add pinmux info for DSS DPI output. Add DT nodes for SIL9022 HDMI transmitter (TX), and the HDMI connector on the AM625 SK and AM62-LP SK platforms. Additionally, connect the output of DSS (VP2) with input of the HDMI TX, and the output of HDMI TX to the input of the HDMI connector. Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Link: https://lore.kernel.org/r/20230809084559.17322-4-a-bhatia1@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-11arm64: dts: ti: k3-am62-main: Add node for DSSAradhya Bhatia
Add Display SubSystem (DSS) DT node for the AM625 SoC. The DSS supports one each of video pipeline (vid) and video-lite pipeline (vidl1). It outputs OLDI signals on one video port (VP1) and DPI signals on another (VP2). The video ports are connected to the pipelines via 2 identical overlay managers (ovr1 and ovr2). Also add the DT node for DSS clock divider. This is a fixed-factor-clock and does not have any register. This comes into effect whenenver OLDI display is used. The input to this divider is a serial clock used by OLDI TXes. The divider divides the input clock by 7, and provides the pixel clock to VP1. Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Link: https://lore.kernel.org/r/20230809084559.17322-3-a-bhatia1@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-11arm64: dts: ti: k3-am62x-sk-common: Update main-i2c1 frequencyAradhya Bhatia
The Display Data Channel (DDC) transactions between an HDMI transmitter (SIL9022A in this case) and an HDMI monitor, occur at a maximum of 100KHz. That's the maximum supported frequency within DDC standards. While the SIL9022A can transact with the core at 400KHz, it needs to drop the frequency to 100KHz when communicating with the monitor, otherwise, the i2c controller times out and shows warning like this. [ 985.773431] omap_i2c 20010000.i2c: controller timed out That feature, however, has not been enabled in the SIL9022 driver. Since, dropping the frequency doesn't affect any other devices on the bus, drop the main-i2c1 frequency from 400KHz to 100KHz. Fixes: a841581451af ("arm64: dts: ti: Refractor AM625 SK dts") Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com> Link: https://lore.kernel.org/r/20230809084559.17322-2-a-bhatia1@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-11arm64: dts: Add ipq5018 SoC and rdp432-c2 board supportSricharan Ramabadhran
Add initial device tree support for the Qualcomm IPQ5018 SoC and rdp432-c2 board. Few things like 'reboot' does not work because, couple of more 'SCM' APIS are needed to clear some TrustZone settings. Those will be posted separately. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> Co-developed-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com> Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> Link: https://lore.kernel.org/r/1690533192-22220-6-git-send-email-quic_srichara@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-11arm64: dts: qcom: sa8775p-ride: enable EMAC1Bartosz Golaszewski
Enable the second MAC on sa8775p-ride. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20230810080909.6259-10-brgl@bgdev.pl Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-11arm64: dts: qcom: sa8775p-ride: add an alias for ethernet0Bartosz Golaszewski
Once we add a second ethernet node, the MDIO bus names will conflict unless we provide aliases. Add one for the existing ethernet node. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20230810080909.6259-9-brgl@bgdev.pl Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-11arm64: dts: qcom: sa8775p-ride: sort aliases alphabeticallyBartosz Golaszewski
For improved readability order the aliases alphabetically for sa8775p-ride. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20230810080909.6259-8-brgl@bgdev.pl Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-11arm64: dts: qcom: sa8775p-ride: add the second SGMII PHYBartosz Golaszewski
Add a second SGMII PHY that will be used by EMAC1 on sa8775p-ride. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20230810080909.6259-7-brgl@bgdev.pl Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-11arm64: dts: qcom: sa8775p-ride: index the first SGMII PHYBartosz Golaszewski
We'll be adding a second SGMII PHY on the same MDIO bus, so let's index the first one for better readability. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20230810080909.6259-6-brgl@bgdev.pl Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-11arm64: dts: qcom: sa8775p-ride: move the reset-gpios property of the PHYBartosz Golaszewski
Device-tree bindings for MDIO define per-PHY reset-gpios as well as a global reset-gpios property at the MDIO node level which controls all devices on the bus. The latter is most likely a workaround for the chicken-and-egg problem where we cannot read the ID of the PHY before bringing it out of reset but we cannot bring it out of reset until we've read its ID. I have proposed a comprehensive solution for this problem in 2020 but it never got upstream. We do however have workaround in place which allows us to hard-code the PHY id in the compatible property, thus skipping the ID scanning. Let's make the device-tree for sa8775p-ride slightly more correct by moving the reset-gpios property to the PHY node with its ID put into the PHY node's compatible. Link: https://lore.kernel.org/all/20200622093744.13685-1-brgl@bgdev.pl/ Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20230810080909.6259-5-brgl@bgdev.pl Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-11arm64: dts: qcom: sa8775p-ride: enable the second SerDes PHYBartosz Golaszewski
Enable the second SerDes PHY on sa8775p-ride development board. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20230810080909.6259-4-brgl@bgdev.pl Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-11arm64: dts: qcom: sa8775p: add a node for EMAC1Bartosz Golaszewski
Add a node for the second MAC on sa8775p platforms. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20230810080909.6259-3-brgl@bgdev.pl Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-11arm64: dts: qcom: sa8775p: add a node for the second serdes PHYBartosz Golaszewski
Add a node for the SerDes PHY used by EMAC1 on sa8775p-ride. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20230810080909.6259-2-brgl@bgdev.pl Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-11arm64: dts: imx8mm-beacon-baseboard: Remove usbotg2 pinctrl-namesFabio Estevam
There is no pinctrl description under usbotg2 node, so remove the unneeded 'pinctrl-names' property. This fixes the following schema warning: imx8mm-beacon-kit.dtb: usb@32e50000: 'pinctrl-0' is a dependency of 'pinctrl-names' Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11arm64: dts: imx8mm-emcon: Remove iomuxc pinctrl-namesFabio Estevam
Remove a 'pinctrl-names' that is not associated with a corresponding 'pinctrl-names'. This fixes the following schema warning: imx8mm-emcon-avari.dtb: pinctrl@30330000: 'pinctrl-0' is a dependency of 'pinctrl-names' Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11arm64: dts: imx8m-beacon-kit: Remove extra sound-sai entryFabio Estevam
'sound-dai' should contain only 'sai5'. Remove the extra entry to fix the following schema warning: imx8mm-beacon-kit.dtb: sound-hdmi: simple-audio-card,cpu:sound-dai: [[110], [0]] is too long from schema $id: http://devicetree.org/schemas/sound/simple-card.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11arm64: dts: freescale: Add DEBIX SOM A and SOM A I/O Board supportMarco Felsch
Add support for the Debix SOM A + SOM A I/O board. The commit enables only the basic features like: - 2x UART - 2x Network - eMMC/µSD - CAN - QSPI - USB Host / Device Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11arm64: dts: imx8mp-debix: remove unused fec pinctrl nodeMarco Felsch
The SoM A uses the EQOS ethernet interface and not the FEC, so drop the interface pinctrl node from the device tree. Fixes: c86d350aae68 ("arm64: dts: Add device tree for the Debix Model A Board") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11arm64: dts: imx8mp-debix-model-a: Remove invalid rtc propertyFabio Estevam
Per haoyu,hym8563.yaml, 'clock-frequency' is not a valid property. Remove it to fix the following schema warning: imx8mp-debix-model-a.dtb: rtc@51: Unevaluated properties are not allowed ('clock-frequency' was unexpected) Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11arm64: dts: imx8mp-msc-sm2s-ep1: Remove invalid sgtl5000 propertyFabio Estevam
As per sgtl5000.yaml, 'clock-names' is not a valid property. Remove it to fix the following schema warning: imx8mp-msc-sm2s-ep1.dtb: audio-codec@a: Unevaluated properties are not allowed ('clock-names' was unexpected) Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11arm64: dts: imx8m-venice: Pass "brcm,bcm4329-fmac"Fabio Estevam
Pass "brcm,bcm4329-fmac" to fix the following schema warnings: imx8mp-venice-gw74xx.dtb: wifi@0: compatible: 'oneOf' conditional failed, one must be fixed: ['cypress,cyw4373-fmac'] is too short 'cypress,cyw4373-fmac' is not one of ['brcm,bcm4329-fmac', 'pci14e4,43dc', 'pci14e4,4464', 'pci14e4,4488', 'pci14e4,4425', 'pci14e4,4433'] from schema $id: http://devicetree.org/schemas/net/wireless/brcm,bcm4329-fmac.yaml# imx8mn-venice-gw7902.dtb: wifi@0: compatible: 'oneOf' conditional failed, one must be fixed: ['brcm,bcm43455-fmac'] is too short 'brcm,bcm43455-fmac' is not one of ['brcm,bcm4329-fmac', 'pci14e4,43dc', 'pci14e4,4464', 'pci14e4,4488', 'pci14e4,4425', 'pci14e4,4433'] from schema $id: http://devicetree.org/schemas/net/wireless/brcm,bcm4329-fmac.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11arm64: dts: imx8mp-evk: Add HDMI supportFabio Estevam
imx8mp-evk has a MIPI DSI port that can be used with a ADV7535 MIPI DSI to HDMI bridge. Add support for it. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-10arm64: dts: ti: k3-j721e: Enable C6x DSP nodes at the board levelAndrew Davis
C6x DSP nodes defined in the top-level J721e SoC dtsi files are incomplete and will not be functional unless they are extended with both mboxes and memory-region information. As theses only known about at the board integration level, these nodes should only be enabled when provided with this information. Disable the C6x DSP nodes in the dtsi files and only enable the ones that are given the required mboxes and memory-region on a given board. Signed-off-by: Andrew Davis <afd@ti.com> Acked-by: Hari Nagalla <hnagalla@ti.com> Tested-by: Udit Kumar <u-kumar1@ti.com> Link: https://lore.kernel.org/r/20230809180145.53158-3-afd@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-10arm64: dts: ti: k3-j784s4: Enable C7x DSP nodes at the board levelAndrew Davis
C7x DSP nodes defined in the top-level J784s4 SoC dtsi files are incomplete and will not be functional unless they are extended with both mboxes and memory-region information. As theses only known about at the board integration level, these nodes should only be enabled when provided with this information. Disable the C7x DSP nodes in the dtsi files and only enable the ones that are given the required mboxes and memory-region on a given board. Signed-off-by: Andrew Davis <afd@ti.com> Acked-by: Hari Nagalla <hnagalla@ti.com> Tested-by: Udit Kumar <u-kumar1@ti.com> Link: https://lore.kernel.org/r/20230809180145.53158-2-afd@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-10arm64: dts: ti: k3-j721e: Enable C7x DSP nodes at the board levelAndrew Davis
C7x DSP nodes defined in the top-level J721e SoC dtsi files are incomplete and will not be functional unless they are extended with both mboxes and memory-region information. As theses only known about at the board integration level, these nodes should only be enabled when provided with this information. Disable the C7x DSP nodes in the dtsi files and only enable the ones that are given the required mboxes and memory-region on a given board. Signed-off-by: Andrew Davis <afd@ti.com> Acked-by: Hari Nagalla <hnagalla@ti.com> Tested-by: Udit Kumar <u-kumar1@ti.com> Link: https://lore.kernel.org/r/20230809180145.53158-1-afd@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-10arm64: dts: ti: k3-*: fix fss node dtbs check warningsDhruva Gole
Fix these fss node warnings that dtbs_check throws: fss@47000000: $nodename:0: 'fss@47000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' By renaming fss to bus. Cc: Nishant Menon <nm@ti.com> Suggested-by: Andrew Davis <afd@ti.com> Signed-off-by: Dhruva Gole <d-gole@ti.com> Reviewed-by: Reid Tonking <reidt@ti.com> Link: https://lore.kernel.org/r/20230810081847.277094-1-d-gole@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-10arm64: dts: qcom: sdm845: Enable CAMSS on the bare rb3 boardBryan O'Donoghue
Enable CAMSS on the standard RB3 as it is possible to run the test pattern generator (TPG) without any populated ports/endpoints. media-ctl --reset yavta --no-query -w '0x009f0903 9' /dev/v4l-subdev4 yavta --list /dev/v4l-subdev4 media-ctl -d /dev/media0 -V '"msm_csid0":0[fmt:SGRBG10_1X10/3280x2464]' media-ctl -d /dev/media0 -V '"msm_vfe0_rdi0":0[fmt:SGRBG10_1X10/3280x2464]' media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]' media-ctl -d /dev/media0 -p yavta -B capture-mplane --capture=5 -n 5 -I -f SGRBG10P -s 3280x2464 --file=TPG-SGRBG10-3280x2464-000-#.bin /dev/video2 Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20230809203534.1100030-2-bryan.odonoghue@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-10arm64: dts: qcom: sa8540p-ride: enable rtcEric Chanudet
SA8540P-ride is one of the Qualcomm platforms that does not have access to UEFI runtime services and on which the RTC registers are read-only, as described in: https://lore.kernel.org/all/20230202155448.6715-1-johan+linaro@kernel.org/ Reserve four bytes in one of the PMIC registers to hold the RTC offset the same way as it was done for sc8280xp-crd which has similar limitations: commit e67b45582c5e ("arm64: dts: qcom: sc8280xp-crd: enable rtc") On SA8540P-ride, the register bank SDAM6 of the first PMIC is not writable. Following recommendations provided during the review, use SDAM2 from the second PMIC at offset 0xa0 instead. Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> Signed-off-by: Eric Chanudet <echanude@redhat.com> Link: https://lore.kernel.org/r/20230809203506.1833205-1-echanude@redhat.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-09arm64: dts: ti: k3-am64: Enable TSCADC nodes at the board levelAndrew Davis
TSCADC nodes defined in the top-level AM64 SoC dtsi files are incomplete and may not be functional unless they are extended with pinmux and/or device information. Disable the TSCADC nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20230810003814.85450-14-afd@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-09arm64: dts: ti: k3-am65: Enable TSCADC nodes at the board levelAndrew Davis
TSCADC nodes defined in the top-level AM65 SoC dtsi files are incomplete and may not be functional unless they are extended with pinmux and/or device information. Disable the TSCADC nodes in the top-level dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by: Andrew Davis <afd@ti.com> Link: https://lore.kernel.org/r/20230810003814.85450-13-afd@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
2023-08-09arm64: dts: ti: k3-j721e: Enable TSCADC nodes at the board levelAndrew Davis
TSCADC nodes defined in the top-level J721e SoC dtsi files are incomplete and may not be functional unless they are extended with pinmux and/or device information. Disable the TSCADC nodes in the dtsi files and only enable the ones that are actually pinned out on a given board. Signed-off-by: Andrew Davis <afd@ti.com> Link: https://lore.kernel.org/r/20230810003814.85450-12-afd@ti.com Signed-off-by: Nishanth Menon <nm@ti.com>