summaryrefslogtreecommitdiff
path: root/arch/arm/mach-at91/Kconfig
AgeCommit message (Collapse)Author
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull clocksource updates from Ingo Molnar: "Misc clocksource/clockevent driver updates that came in a bit late but are ready for v5.2" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: misc: atmel_tclib: Do not probe already used TCBs clocksource/drivers/timer-atmel-tcb: Convert tc_clksrc_suspend|resume() to static clocksource/drivers/tcb_clksrc: Rename the file for consistency clocksource/drivers/timer-atmel-pit: Rework Kconfig option clocksource/drivers/tcb_clksrc: Move Kconfig option ARM: at91: Implement clocksource selection clocksource/drivers/tcb_clksrc: Use tcb as sched_clock clocksource/drivers/tcb_clksrc: Stop depending on atmel_tclib ARM: at91: move SoC specific definitions to SoC folder clocksource/drivers/timer-milbeaut: Cleanup common register accesses clocksource/drivers/timer-milbeaut: Add shutdown function clocksource/drivers/timer-milbeaut: Fix to enable one-shot timer clocksource/drivers/tegra: Rework for compensation of suspend time clocksource/drivers/sp804: Add COMPILE_TEST to CONFIG_ARM_TIMER_SP804 clocksource/drivers/sun4i: Add a compatible for suniv dt-bindings: timer: Add Allwinner suniv timer
2019-05-02ARM: at91: Implement clocksource selectionAlexandre Belloni
Allow selecting and unselecting the PIT clocksource driver so it doesn't have to be compiled when unused. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-04-04ARM: at91: remove HAVE_FB_ATMEL for sama5 SoC as they use DRMNicolas Ferre
SAMA5 devices use the newer DRM driver for LCD. They don't need the older FB driver: remove the Kconfig option for them. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
2018-07-06clk: at91: add I2S clock mux driverCodrin Ciubotariu
This driver is a simple muxing driver that controls the I2S's clock input by using syscon/regmap to change the parent. The available inputs can be peripheral clock and generated clock. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> [sboyd@kernel.org: Fix SPDX tag comment style] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-02-28ARM: at91: Kconfig: Update company to MicrochipNicolas Ferre
Update AT91 Kconfig text and help to move from Atmel to Microchip. The AT91 wording is kept in the title for historical reasons. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2017-09-13Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The diff is dominated by the Allwinner A10/A20 SoCs getting converted to the sunxi-ng framework. Otherwise, the heavy hitters are various drivers for SoCs like AT91, Amlogic, Renesas, and Rockchip. There are some other new clk drivers in here too but overall this is just a bunch of clk drivers for various different pieces of hardware and a collection of non-critical fixes for clk drivers. New Drivers: - Allwinner R40 SoCs - Renesas R-Car Gen3 USB 2.0 clock selector PHY - Atmel AT91 audio PLL - Uniphier PXs3 SoCs - ARC HSDK Board PLLs - AXS10X Board PLLs - STMicroelectronics STM32H743 SoCs Removed Drivers: - Non-compiling mb86s7x support Updates: - Allwinner A10/A20 SoCs converted to sunxi-ng framework - Allwinner H3 CPU clk fixes - Renesas R-Car D3 SoC - Renesas V2H and M3-W modules - Samsung Exynos5420/5422/5800 audio fixes - Rockchip fractional clk approximation fixes - Rockchip rk3126 SoC support within the rk3128 driver - Amlogic gxbb CEC32 and sd_emmc clks - Amlogic meson8b reset controller support - IDT VersaClock 5P49V5925/5P49V6901 support - Qualcomm MSM8996 SMMU clks - Various 'const' applications for struct clk_ops - si5351 PLL reset bugfix - Uniphier audio on LD11/LD20 and ethernet support on LD11/LD20/Pro4/PXs2 - Assorted Tegra clk driver fixes" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (120 commits) clk: si5351: fix PLL reset ASoC: atmel-classd: remove aclk clock ASoC: atmel-classd: remove aclk clock from DT binding clk: at91: clk-generated: make gclk determine audio_pll rate clk: at91: clk-generated: create function to find best_diff clk: at91: add audio pll clock drivers dt-bindings: clk: at91: add audio plls to the compatible list clk: at91: clk-generated: remove useless divisor loop clk: mb86s7x: Drop non-building driver clk: ti: check for null return in strrchr to avoid null dereferencing clk: Don't write error code into divider register clk: uniphier: add video input subsystem clock clk: uniphier: add audio system clock clk: stm32h7: Add stm32h743 clock driver clk: gate: expose clk_gate_ops::is_enabled clk: nxp: clk-lpc32xx: rename clk_gate_is_enabled() clk: uniphier: add PXs3 clock data clk: hi6220: change watchdog clock source clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808 clk: cs2000: Add cs2000_set_saved_rate ...
2017-09-01clk: at91: add audio pll clock driversQuentin Schulz
This new clock driver set allows to have a fractional divided clock that would generate a precise clock particularly suitable for audio applications. The main audio pll clock has two children clocks: one that is connected to the PMC, the other that can directly drive a pad. As these two routes have different enable bits and different dividers and divider formulas, they are handled by two different drivers. Each of them could modify the rate of the main audio pll parent. The main audio pll clock can output 620MHz to 700MHz. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-08-23ARM: at91: don't select CONFIG_ARM_CPU_SUSPEND for old platformsArnd Bergmann
My previous patch fixed a link error for all at91 platforms when CONFIG_ARM_CPU_SUSPEND was not set, however this caused another problem on a configuration that enabled CONFIG_ARCH_AT91 but none of the individual SoCs, and that also enabled CPU_ARM720 as the only CPU: warning: (ARCH_AT91 && SOC_IMX23 && SOC_IMX28 && ARCH_PXA && MACH_MVEBU_V7 && SOC_IMX6 && ARCH_OMAP3 && ARCH_OMAP4 && SOC_OMAP5 && SOC_AM33XX && SOC_DRA7XX && ARCH_EXYNOS3 && ARCH_EXYNOS4 && EXYNOS5420_MCPM && EXYNOS_CPU_SUSPEND && ARCH_VEXPRESS_TC2_PM && ARM_BIG_LITTLE_CPUIDLE && ARM_HIGHBANK_CPUIDLE && QCOM_PM) selects ARM_CPU_SUSPEND which has unmet direct dependencies (ARCH_SUSPEND_POSSIBLE) arch/arm/kernel/sleep.o: In function `cpu_resume': (.text+0xf0): undefined reference to `cpu_arm720_suspend_size' arch/arm/kernel/suspend.o: In function `__cpu_suspend_save': suspend.c:(.text+0x134): undefined reference to `cpu_arm720_do_suspend' This improves the hack some more by only selecting ARM_CPU_SUSPEND for the part that requires it, and changing pm.c to drop the contents of unused init functions so we no longer refer to cpu_resume on at91 platforms that don't need it. Fixes: cc7a938f5f30 ("ARM: at91: select CONFIG_ARM_CPU_SUSPEND") Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-06-18Merge tag 'at91-4.12-fixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/soc Bring in the fixes branch to avoid a merge conflict between new SoC options and the build fix adding CONFIG_AMR_CPU_SUSPEND. Fixes for 4.12: Fix two compilation issues * tag 'at91-4.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: at91: select CONFIG_ARM_CPU_SUSPEND memory: atmel-ebi: mark PM ops as __maybe_unused Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-02ARM: at91: handle CONFIG_PM for armv7m configurationsAlexandre Belloni
There is currently no PM support for samx7 but the symbol can still be selected. This avoids compilation issues. Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-02ARM: at91: Add armv7m supportSzemző András
Add Atmel SAME70/SAMS70/SAMV71 SoC support. Signed-off-by: Szemző András <sza@esh.hu> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-29ARM: at91: select CONFIG_ARM_CPU_SUSPENDArnd Bergmann
The reference to cpu_resume requires the corresponding generic code to be enabled when CONFIG_PM is set: arch/arm/mach-at91/pm.o: In function `sama5d2_pm_init': pm.c:(.init.text+0x5e8): undefined reference to `cpu_resume' Fixes: 24a0f5c539f9 ("ARM: at91: pm: Add sama5d2 backup mode") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-09-21ARM: stop *MIGHT_HAVE_PCI* config from being selected redundantlyKishon Vijay Abraham I
*MIGHT_HAVE_PCI* config is already selected in ARCH_MULTIPLATFORM. Don't select it redundantly in all ARCH_MULTIPLATFORM based machines. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-06-03ARM: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIBLinus Walleij
This replaces: - "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB" as this can now be selected directly. - "select ARCH_WANT_OPTIONAL_GPIOLIB" with no dependency: GPIOLIB is now selectable by everyone, so we need not declare our intent to select it. When ordering the symbols the following rationale was used: if the selects were in alphabetical order, I moved select GPIOLIB to be in alphabetical order, but if the selects were not maintained in alphabetical order, I just replaced "select ARCH_REQUIRE_GPIOLIB" with "select GPIOLIB". Cc: Michael Büsch <m@bues.ch> Cc: arm@kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-17clk: at91: make use of syscon to share PMC registers in several driversBoris Brezillon
The PMC block is providing several functionnalities: - system clk management - cpuidle - platform suspend Replace the void __iomem *regs field by a regmap (retrieved using syscon) so that we can later share the regmap across several drivers without exporting a new specific API or a global void __iomem * variable. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2016-01-20Merge tag 'armsoc-cleanup' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "A smallish number of general cleanup commits this release cycle. Some of these are minor tweaks: - shmobile change of binding for their GIC (using arm,pl390 now) - ARCH_RENESAS introduction - Misc other renesas updates There's also a couple of treewide commits from Masahiro Yamada cleaning up const/__initconst for SMP operation structs and a switch to using "depends on" instead of if-constructs on most of the Kconfig platform targets" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: staging: board: armadillo800eva: Use "arm,pl390" staging: board: kzm9d: Use "arm,pl390" ARM: shmobile: r8a7778 dtsi: Use "arm,pl390" for GIC ARM: shmobile: emev2 dtsi: Use "arm,pl390" for GIC ARM: shmobile: r8a7740 dtsi: Use "arm,pl390" for GIC ARM: shmobile: r7s72100 dtsi: Use "arm,pl390" for GIC ARM: use "depends on" for SoC configs instead of "if" after prompt ARM/clocksource: use automatic DT probing for ux500 PRCMU ARM: use const and __initconst for smp_operations ARM: hisi: do not export smp_operations structures ARM: mvebu: remove unused mach/gpio.h ARM: shmobile: Remove legacy mach/irqs.h ARM: shmobile: Introduce ARCH_RENESAS MAINTAINERS: Remove link to oss.renesas.com which is closed
2015-12-04ARM: at91: fix pinctrl driver selectionLudovic Desroches
Move the selection of the pinctrl driver to SoC family level since we have two pinctrl drivers. It is useless to select one which is not compatible with the SoC. [abelloni: fixed pm.c when only sama2d2 is selected] Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-12-01ARM: use "depends on" for SoC configs instead of "if" after promptMasahiro Yamada
Many ARM sub-architectures use prompts followed by "if" conditional, but it is wrong. Please notice the difference between config ARCH_FOO bool "Foo SoCs" if ARCH_MULTI_V7 and config ARCH_FOO bool "Foo SoCs" depends on ARCH_MULTI_V7 These two are *not* equivalent! In the former statement, it is not ARCH_FOO, but its prompt that depends on ARCH_MULTI_V7. So, it is completely valid that ARCH_FOO is selected by another, but ARCH_MULTI_V7 is still disabled. As it is not unmet dependency, Kconfig never warns. This is probably not what you want. The former should be used only when you need to do so, and you really understand what you are doing. (In most cases, it should be wrong!) For enabling/disabling sub-architectures, the latter is always correct. As a good side effect, this commit fixes some entries over 80 columns (mach-imx, mach-integrator, mach-mbevu). [Arnd: I note that there is not really a bug here, according to the discussion that followed, but I can see value in being consistent and in making the lines shorter] Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Jun Nie <jun.nie@linaro.org> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Krzysztof Halasa <khc@piap.pl> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-01clk: at91: add generated clock driverNicolas Ferre
Add a new type of clocks that can be provided to a peripheral. In addition to the peripheral clock, this new clock that can use several input clocks as parents can generate divided rates. This would allow a peripheral to have finer grained clocks for generating a baud rate, clocking an asynchronous part or having more options in frequency. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [sboyd@codeaurora.org: Transition to new clk_hw provider APIs] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-08-05ARM: at91/soc: add basic support for new sama5d2 SoCNicolas Ferre
Add Kconfig entries, header file changes and addition to the documentation. The early debug infrastructure is also added for easy development. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-03ARM: at91: add a Kconfig dependency on multi-platformNicolas Ferre
When building a legacy (non-multi) platforms and if the ARCH_AT91 config option is enabled there is a build error. We need AT91 to depend on multi-platform core type options. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-03-19ARM: at91: drop AT91_TIMER_HZAlexandre Belloni
Drop AT91_TIMER_HZ as this can be handled using HZ_FIXED. Initial help message was: On AT91rm9200 chips where you're using a system clock derived from the 32768 Hz hardware clock, this tick rate should divide it exactly: use a power-of-two value, such as 128 or 256, to reduce timing errors caused by rounding. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-19ARM: at91: switch to multiplatformAlexandre Belloni
Switch AT91 to multiplatform as all SoCs are properly handled. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-16ARM: at91: time: move the system timer driver to drivers/clocksourceAlexandre Belloni
Import at91rm9200_time.c from mach-at91 as timer-atmel-st.c. Further cleanup is required to get rid of the mach-at91 headers. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13ARM: at91: remove NEED_MACH_IO_HArnd Bergmann
The mach/io.h header on at91 is used to support a nonstandard I/O space window for the cf card driver. This changes the driver to use pci_ioremap_io in order to have the standard location, and then removes the custom mach/io.h. [alexandre.belloni@free-electrons.com: Added PCI dependency] Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13ARM: at91/pm: remove CONFIG_AT91_SLOW_CLOCK config optionWenyou Yang
The slow clock always exists, selecting CONFIG_AT91_SLOW_CLOCK config is unnecessary for the suspend to memory mode. For this mode the master clock should always switch to the slow clock. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-13ARM: at91: move "select SRAM" under SOC_AT91SAM9 and SOC_SAMA5Wenyou Yang
To simply the PM config the CONFIG_AT91_SLOW_CLOCK option will be removed, so move "select SRAM" from under AT91_SLOW_CLOCK, add "select SRAM if PM" under SOC_AT91SAM9 and SOC_SAMA5 Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-12ARM: at91: remove ksz8081 phy fixup registration for sama5d4ek boardBoris Brezillon
Commit 2b0ba96cea60 ("net: phy: micrel: disable NAND-tree for KSZ8021, KSZ8031, KSZ8051, KSZ8081") automated the NAND-tree mode deactivation process, thus making this phy fixup useless. Remove it along with the associated headers inclusion. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> [nicolas.ferre@atmel.com: remove selection of PHYLIB in at91 Kconfig] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-02-18ARM: mm: Remove Kconfig symbol CACHE_PL310Paul Bolle
Commit 20e783e39e55 ("ARM: 8296/1: cache-l2x0: clean up aurora cache handling") removed the only user of the Kconfig symbol CACHE_PL310. Setting CACHE_PL310 is now pointless. Remove its Kconfig entry, and one select of this symbol. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-02ARM: at91: merge all SOC_AT91SAM9xxxAlexandre Belloni
Only use SOC_AT91SAM9 for all the at91sam9 SoCs. It removes all the empty at91sam9xxx.c SoC files. It also removes the useless at91_init_soc affectation procedure and its "init" function pointer. Only the SoC detection and display are kept for the at91sam9: at91_soc_is_enabled() and at91_boot_soc.map_io() function calls are also removed. It enables HAVE_AT91_SMD and HAVE_AT91_UTMI for all the sam9 SoCs but this only represents 96 bytes of uncompressed kernel code. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> [nicolas.ferre@atmel.com: different organization of the patches] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-26ARM: at91: stop using HAVE_AT91_DBGUxAlexandre Belloni
In order to remove SOC_SAM9xxx options, stop using HAVE_AT91_DBGUx. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-16ARM: at91: pm: use the mmio-sram pool to access SRAMAlexandre Belloni
Now that the SRAM is part of a genpool, use it to allocate memory to use for the slowclock implementation. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: remove useless config MACH_AT91SAM9_DTAlexandre Belloni
Now that at91sam9 SoCs are only supported through DT, remove CONFIG_MACH_AT91SAM9_DT and use CONFIG_SOC_AT91SAM9 instead. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-15ARM: at91: remove useless config MACH_AT91RM9200_DTAlexandre Belloni
Now that rm9200 is only supported through DT, remove CONFIG_MACH_AT91RM9200_DT and use CONFIG_SOC_AT91RM9200 instead. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-12-02ARM: at91/Kconfig: select board files automaticallyArnd Bergmann
An explicit selection option is not needed for board files so now we select the board from SoC option. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [nicolas.ferre@atmel.com: remove option's comments; split patch] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-26ARM: at91: remove all !DT related configuration optionsNicolas Ferre
OLD_CLK_AT91 & OLD_IRQ_AT91 were only selected by entries in Kconfig.non_dt that are now gone. So we remove all this legacy stuff and select the proper options in the SOC_ entries. As USE_OF is now selected directly in arch/arm/Kconfig AT91 entry, we can safely remove it everywhere in this file. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
2014-11-21ARM: at91: switch configuration option to SOC_AT91RM9200Nicolas Ferre
As the ARCH_AT91RM9200 is removed because being !DT, we use the SOC_AT91RM9200 variant. This option can certainly be removed once the ST driver is reworked a bit. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
2014-11-21ARM: at91: remove at91rm9200 legacy board supportNicolas Ferre
Second part of at91rm9200 legacy !DT removal. This is the core !DT support removal for this Atmel SoC. Note that from now on, the Kconfig.non_dt file and its specialized options are completely removed. Use the Device Tree for running this board with newer kernels. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
2014-11-13ARM: at91: remove CONFIG_MACH_SAMA5_DTAlexandre Belloni
CONFIG_MACH_SAMA5_DT is useless as the only way to boot on sama5 based boards is to use device tree. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> [nicolas.ferre@atmel.com: adapt on top of cleanup branch] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-03ARM: at91: remove no-MMU at91x40 supportNicolas Ferre
As there is currently no-one to take care of this old !MMU target and as its support in recent kernels is a bit rotten, remove this at91x40 support and the board file associated with it (at91eb01). There are modern ARM !MMU in Mainline now so this target is not interesting for building tests anymore. It would be better to start from these modern ARM !MMU platforms to reintroduce at91x40 support if needed. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2014-10-08Merge tag 'drivers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "These are changes for drivers that are intimately tied to some SoC and for some reason could not get merged through the respective subsystem maintainer tree. Most of the new code is for the Keystone Navigator driver, which is new base support that is going to be needed for their hardware accelerated network driver and other units. Most of the commits are for moving old code around from at91 and omap for things that are done in device drivers nowadays. - at91: move reset, poweroff, memory and clocksource code into drivers directories - socfpga: add edac driver (through arm-soc, as requested by Boris) - omap: move omap-intc code to drivers/irqchip - sunxi: added an RTC driver for sun6i - omap: mailbox driver related changes - keystone: support for the "Navigator" component - versatile: new reboot, led and soc drivers" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (92 commits) bus: arm-ccn: Fix spurious warning message leds: add device tree bindings for register bit LEDs soc: add driver for the ARM RealView power: reset: driver for the Versatile syscon reboot leds: add a driver for syscon-based LEDs drivers/soc: ti: fix build break with modules MAINTAINERS: Add Keystone Multicore Navigator drivers entry soc: ti: add Keystone Navigator DMA support Documentation: dt: soc: add Keystone Navigator DMA bindings soc: ti: add Keystone Navigator QMSS driver Documentation: dt: soc: add Keystone Navigator QMSS bindings rtc: sunxi: Depend on platforms sun4i/sun7i that actually have the rtc rtc: sun6i: Add sun6i RTC driver irqchip: omap-intc: remove unnecessary comments irqchip: omap-intc: correct maximum number or MIR registers irqchip: omap-intc: enable TURBO idle mode irqchip: omap-intc: enable IP protection irqchip: omap-intc: remove unnecesary of_address_to_resource() call irqchip: omap-intc: comment style cleanup irqchip: omap-intc: minor improvement to omap_irq_pending() ...
2014-10-08Merge tag 'soc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Arnd Bergmann: "New and updated SoC support. Among the things new for this release are: - at91: Added support for the new SAMA5D4 SoC, following the earlier SAMA5D3 - bcm: Added support for BCM63XX family of DSL SoCs - hisi: Added support for HiP04 server-class SoC - meson: Initial support for the Amlogic Meson6 (aka 8726MX) platform - shmobile: added support for new r8a7794 (R-Car E2) automotive SoC Noteworthy changes to existing SoC support are: - imx: convert i.MX1 to device tree - omap: lots of power management work - omap: base support to enable moving to standard UART driver - shmobile: lots of progress for multiplatform support, still ongoing" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (171 commits) ARM: hisi: depend on ARCH_MULTI_V7 CNS3xxx: Fix debug UART. ARM: at91: fix nommu build regression ARM: meson: add basic support for MesonX SoCs ARM: meson: debug: add debug UART for earlyprintk support irq: Export handle_fasteoi_irq ARM: mediatek: Add earlyprintk support for mt6589 ARM: hisi: Fix platmcpm compilation when ARMv6 is selected ARM: debug: fix alphanumerical order on debug uarts ARM: at91: document Atmel SMART compatibles ARM: at91: add sama5d4 support to sama5_defconfig ARM: at91: dt: add device tree file for SAMA5D4ek board ARM: at91: dt: add device tree file for SAMA5D4 SoC ARM: at91: SAMA5D4 SoC detection code and low level routines ARM: at91: introduce basic SAMA5D4 support clk: at91: add a driver for the h32mx clock ARM: pxa3xx: provide specific platform_devices for all ssp ports ARM: pxa: ssp: provide platform_device_id for PXA3xx ARM: OMAP4+: Remove static iotable mappings for SRAM ARM: OMAP4+: Move SRAM data to DT ...
2014-09-22ARM: at91: introduce basic SAMA5D4 supportNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2014-09-22clk: at91: add a driver for the h32mx clockAlexandre Belloni
Newer SoCs have two different AHB interconnect. The AHB 32 bits Matrix interconnect (h32mx) has a clock that can be setup at the half of the h64mx clock (which is mck). The h32mx clock can not exceed 90 MHz. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-09-15ARM: at91: PIT: Move the driver to drivers/clocksourceMaxime Ripard
Now that we don't depend on anyting in the mach-at91 directory, we can just move the driver to where it belongs. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Conflicts: arch/arm/mach-at91/Kconfig arch/arm/mach-at91/Makefile
2014-09-03ARM: at91: PIT: Rework probe functionsMaxime Ripard
The PIT timer driver until now had a single probe function, disregarding wether it was probed through DT or in the old-style way. This code later on was calling some DT function to retrieve the proper values for its base address, interrupts and clocks. While this was working, it was preventing the usage of CLOCKSOURCE_OF_DECLARE, and the two different probe path were not as clearly separated as they could be. Rework the probe path to take this into account, and switch to CLOCKSOURCE_OF_DECLARE. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-08-25ARM: at91: Remove reset code from the machine codeMaxime Ripard
Now that the transition is over and that we probe our reset driver in every case, we can remove the legacy code from the machine directory. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-08-25Merge tag 'at91-drivers-for-3.17' of ↵Nicolas Ferre
git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux Pull AT91 reset, poweroff and ram drivers from Maxime Ripard: "This tag holds the various new drivers introduced to move code that used to be in mach-at91 over to the proper frameworks. These files are the reboot and poweroff code for all AT91 SoCs but the RM9200, and the ram controller driver is not doing much at the time, except for grabing the RAM clock in order to leave it always enabled." Conflicts: arch/arm/mach-at91/Kconfig
2014-08-19ARM: at91: make use of the new AIC driver for dt enabled boardsBoris BREZILLON
Remove selection of OLD_IRQ_AT91 when selecting dt boards. Select ATMEL_AIC_IRQ for sama5 SoCs (a kernel compiled for this SoC will always use ATMEL_AIC_IRQ driver). Select ATMEL_AIC_IRQ for at91rm9200 and at91sam9 SoCs only if OLD_IRQ_AT91 is not selected (which means we are compiling a pure DT kernel, without any legacy board support). Remove specific irq init code in all dt board files: this init procedure is automatically handled in of_irq_init which is called by the arm irq core code and is in charge of calling the appropriate aic init functions. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>