summaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)Author
2021-08-17Merge tag 'qcom-dts-for-5.15' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm dts updates for v5.15 This introduces the MSM8226 platform and an initial dts for the Samsung Galaxy S III Neo phone. MSM8974 gains another UART and this is used to enable Bluetooth on the Sony Xperia Z2 Tablet. Samsung Galaxy S5 gains regulator definitions for audio and modem remoteprocs, effectively enabling these. DSI clocks on APQ8064 are updates as the old legacy clock names are no longer supported by the driver. And IPQ806x GMAC nodes gains AHB resets wired up. Lastly APQ8060 is converted to a SPDX header and the ethernet node is updates in accordance with the binding. * tag 'qcom-dts-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: add ahb reset to ipq806x-gmac ARM: dts: qcom: Fix up APQ8060 DragonBoard license ARM: dts: qcom: msm8974: castor: Add Bluetooth-related nodes ARM: dts: qcom: msm8974: Add blsp2_uart7 for bluetooth on sirius ARM: dts: qcom: Add initial DTS file for Samsung Galaxy S III Neo phone dt-bindings: arm: qcom: Document MSM8226 SoC binding ARM: dts: qcom: Add support for MSM8226 SoC ARM: dts: qcom: apq8060: Correct Ethernet node name and drop bogus irq property ARM: dts: qcom: apq8064: correct clock names ARM: dts: qcom: msm8974-klte: Enable remote processors Link: https://lore.kernel.org/r/20210816211957.579365-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-17ARM: dts: aspeed: p10bmc: Add power control pinsJim Wright
Add to p10bmc systems the GPIO line names used in chassis power on / off control and chassis power good monitoring. Names used are as documented at [1]. [1] https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md Signed-off-by: Jim Wright <jlwright@us.ibm.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210816160002.18645-1-jlwright@us.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-08-16Merge tag 'imx-dt-5.15' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm32 device tree changes for 5.15: - A series from Christoph Niedermaier to clean up i.MX6 DHCOM support. - New board support: DHCOM based PicoITX, DHSOM based DRC02, SolidRun SolidSense, SKOV i.MX6 boards. - Add WiFi support for i.MX7D base reMkarkable2 device. - Add FTM devices for i.MX7 to have Flex Timers support. - Configure ENET_REF clock to 125MHz for imx6qp-prtwd3 to support RGMII PHY mode. - Drop unneeded #address-cells and #size-cells from vf610-zii SPI EEPROM device node. - Add missing USB OTG OC pinmux and Crypto device for i.MX6QDL Gateworks boards. * tag 'imx-dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (23 commits) ARM: dts: imx6qp-prtwd3: configure ENET_REF clock to 125MHz ARM: dts: vf610-zii-dev-rev-b: Remove #address-cells and #size-cells property from at93c46d dt node ARM: dts: add SKOV imx6q and imx6dl based boards ARM: dts: imx7: add ftm nodes for Flex Timers ARM: dts: imx6qdl-dhcom: Add DHSOM based DRC02 board ARM: dts: imx6qdl-dhcom: Add DHCOM based PicoITX board ARM: dts: imx6qdl-dhcom: Split SoC-independent parts of DHCOM SOM and PDK2 ARM: dts: imx6q-dhcom: Cleanup of the devicetrees ARM: dts: imx6q-dhcom: Rearrange of iomux ARM: dts: imx6q-dhcom: Rework of the DHCOM GPIO pinctrls ARM: dts: imx6q-dhcom: Use 1G ethernet on the PDK2 board ARM: dts: imx6q-dhcom: Set minimum memory size of all DHCOM i.MX6 variants ARM: dts: imx6q-dhcom: Remove ddc-i2c-bus property ARM: dts: imx6q-dhcom: Add keys and leds to the PDK2 board ARM: dts: imx6q-dhcom: Align stdout-path with other DHCOM SoMs ARM: dts: imx6q-dhcom: Adding Wake pin to the PCIe pinctrl ARM: dts: imx6q-dhcom: Fill GPIO line names on DHCOM SoM ARM: dts: imx6q-dhcom: Add interrupt and compatible to the ethernet PHY ARM: dts: imx6q-dhcom: Add the parallel system bus ARM: dts: imx7d-remarkable2: Add WiFi support ... Link: https://lore.kernel.org/r/20210814133853.9981-2-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-16Merge tag 'tegra-for-5.15-arm-dt' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt ARM: tegra: Device tree changes for v5.15-rc1 The majority of this is temperature sensor additions for various devices and fixes to the trigger type of the thermal interrupts. Other than that there are various minor fixes across the board. * tag 'tegra-for-5.15-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: tamonten: Fix UART pad setting ARM: tegra: nexus7: Improve thermal zones ARM: tegra: acer-a500: Improve thermal zones ARM: tegra: acer-a500: Use verbose variant of atmel,wakeup-method value ARM: tegra: acer-a500: Add power supplies to accelerometer ARM: tegra: acer-a500: Remove bogus USB VBUS regulators ARM: tegra: jetson-tk1: Correct interrupt trigger type of temperature sensor ARM: tegra: dalmore: Correct interrupt trigger type of temperature sensor ARM: tegra: cardhu: Correct interrupt trigger type of temperature sensor ARM: tegra: apalis: Correct interrupt trigger type of temperature sensor ARM: tegra: nyan: Correct interrupt trigger type of temperature sensor ARM: tegra: acer-a500: Add interrupt to temperature sensor node ARM: tegra: nexus7: Add interrupt to temperature sensor node ARM: tegra: paz00: Add interrupt to temperature sensor node ARM: tegra: ouya: Add interrupt to temperature sensor node ARM: tegra: Add SoC thermal sensor to Tegra30 device-trees Link: https://lore.kernel.org/r/20210813162157.2820913-4-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-16Merge tag 'renesas-arm-dt-for-v5.15-tag2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.15 (take two) - Pin control, ADC, and CANFD support for the RZ/G2L SoC, - Add interrupt-names properties to the Renesas RZ/A and RZ/G2L I2C Bus Interface. * tag 'renesas-arm-dt-for-v5.15-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: dt-bindings: i2c: renesas,riic: Make interrupt-names required arm64: dts: renesas: r9a07g044: Add I2C interrupt-names ARM: dts: rza: Add I2C interrupt-names dt-bindings: i2c: renesas,riic: Add interrupt-names arm64: dts: renesas: r9a07g044: Add CANFD node arm64: dts: renesas: r9a07g044: Add ADC node arm64: dts: renesas: r9a07g044: Add pinctrl node dt-bindings: clock: r9a07g044-cpg: Add entry for P0_DIV2 core clock Link: https://lore.kernel.org/r/cover.1628849623.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-16ARM: dts: aspeed: cloudripper: Add comments for "mdio1"Tao Ren
Add some comments to explain the purpose of "mdio1" controller: it's connected to the MDC/MDIO interface of the on-board management switch. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Link: https://lore.kernel.org/r/20210813061900.24539-1-rentao.bupt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-08-16ARM: dts: aspeed: minipack: Update flash partition tableTao Ren
Update firmware flash "data0" partition size from 4MB to 8MB for larger persistent storage on minipack BMC. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Link: https://lore.kernel.org/r/20210720002704.7390-1-rentao.bupt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-08-14ARM: dts: imx6qp-prtwd3: configure ENET_REF clock to 125MHzOleksij Rempel
By default ENET_REF is configured to 50MHz, which is usable for the RMII link. In case RGMII is used, we need 125MHz clock. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-14ARM: dts: vf610-zii-dev-rev-b: Remove #address-cells and #size-cells ↵Aswath Govindraju
property from at93c46d dt node Remove #address-cells and #size-cells property from at93c46d device tree node as it does not have child nodes. Fixes: 1556063fde42 ("ARM: dts: vf610-zii-dev: Add ZII development board.") Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-14ARM: dts: add SKOV imx6q and imx6dl based boardsSam Ravnborg
Add SKOV imx6q/dl LT2, LT6 and mi1010ait-1cp1 boards. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Søren Andersen <san@skov.dk> Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-13ARM: tegra: tamonten: Fix UART pad settingAndreas Obergschwandtner
This patch fixes the tristate and pullup configuration for UART 1 to 3 on the Tamonten SOM. Signed-off-by: Andreas Obergschwandtner <andreas.obergschwandtner@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h 9e26680733d5 ("bnxt_en: Update firmware call to retrieve TX PTP timestamp") 9e518f25802c ("bnxt_en: 1PPS functions to configure TSIO pins") 099fdeda659d ("bnxt_en: Event handler for PPS events") kernel/bpf/helpers.c include/linux/bpf-cgroup.h a2baf4e8bb0f ("bpf: Fix potentially incorrect results with bpf_get_local_storage()") c7603cfa04e7 ("bpf: Add ambient BPF runtime context stored in current") drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c 5957cc557dc5 ("net/mlx5: Set all field of mlx5_irq before inserting it to the xarray") 2d0b41a37679 ("net/mlx5: Refcount mlx5_irq with integer") MAINTAINERS 7b637cd52f02 ("MAINTAINERS: fix Microchip CAN BUS Analyzer Tool entry typo") 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-13ARM: tegra: nexus7: Improve thermal zonesDmitry Osipenko
Use skin temperature for maintaining temperature that is suitable specifically for Nexus 7. Add CPU thermal zone that protects silicon. All these changes don't make a significant difference, but it is a more correct definition of thermal zones. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-13ARM: tegra: acer-a500: Improve thermal zonesDmitry Osipenko
Use skin temperature for maintaining temperature that is suitable specifically for A500. Add CPU thermal zone that protects silicon. All these changes don't make a significant difference, but it is a more correct definition of thermal zones. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-13ARM: tegra: acer-a500: Use verbose variant of atmel,wakeup-method valueDmitry Osipenko
The verbose variant of the atmel,wakeup-method value was lost when patch that added the property was merged because it conflicted with other patch, re-add it for consistency. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-13ARM: tegra: acer-a500: Add power supplies to accelerometerDmitry Osipenko
Add power supplies to accelerometer node, for completeness. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-13ARM: tegra: acer-a500: Remove bogus USB VBUS regulatorsDmitry Osipenko
The configuration of USB VBUS regulators was borrowed from downstream kernel, which is incorrect because the corresponding GPIOs are connected to PROX_EN (A501 3G model) and LED_EN pins in accordance to the board schematics. USB works fine with both GPIOs being disabled, so remove the bogus USB VBUS regulators. The USB VBUS of USB3 is supplied from the fixed 5v system regulator and device-mode USB1 doesn't have VBUS switches. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-13ARM: tegra: jetson-tk1: Correct interrupt trigger type of temperature sensorDmitry Osipenko
The LM90 temperature sensor should use edge-triggered interrupt because LM90 hardware doesn't deassert interrupt line until temperature is back to normal state, which results in interrupt storm. Correct the interrupt trigger type. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-13ARM: tegra: dalmore: Correct interrupt trigger type of temperature sensorDmitry Osipenko
The LM90 temperature sensor should use edge-triggered interrupt because LM90 hardware doesn't deassert interrupt line until temperature is back to normal state, which results in interrupt storm. Correct the interrupt trigger type. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-13ARM: tegra: cardhu: Correct interrupt trigger type of temperature sensorDmitry Osipenko
The LM90 temperature sensor should use edge-triggered interrupt because LM90 hardware doesn't deassert interrupt line until temperature is back to normal state, which results in interrupt storm. Correct the interrupt trigger type. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-13ARM: tegra: apalis: Correct interrupt trigger type of temperature sensorDmitry Osipenko
The LM90 temperature sensor should use edge-triggered interrupt because LM90 hardware doesn't deassert interrupt line until temperature is back to normal state, which results in interrupt storm. Correct the interrupt trigger type. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-13ARM: tegra: nyan: Correct interrupt trigger type of temperature sensorDmitry Osipenko
The LM90 temperature sensor should use edge-triggered interrupt because LM90 hardware doesn't deassert interrupt line until temperature is back to normal state, which results in interrupt storm. Correct the interrupt trigger type. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-13ARM: tegra: acer-a500: Add interrupt to temperature sensor nodeDmitry Osipenko
The TEMP_ALERT pin of LM90 temperature sensor is connected to Tegra SoC. Add interrupt property to the temperature sensor for completeness. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-13ARM: tegra: nexus7: Add interrupt to temperature sensor nodeDmitry Osipenko
The TEMP_ALERT pin of LM90 temperature sensor is connected to Tegra SoC. Add interrupt property to the temperature sensor for completeness. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-13ARM: tegra: paz00: Add interrupt to temperature sensor nodeDmitry Osipenko
The TEMP_ALERT pin of LM90 temperature sensor is connected to Tegra SoC. Add interrupt property to the temperature sensor for completeness. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-13ARM: tegra: ouya: Add interrupt to temperature sensor nodeDmitry Osipenko
The TEMP_ALERT pin of LM90 temperature sensor is connected to Tegra SoC. Add interrupt property to the temperature sensor and enable it in pinmux, for completeness. Tested-by: Matt Merhar <mattmerhar@protonmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-13ARM: tegra: Add SoC thermal sensor to Tegra30 device-treesDmitry Osipenko
Add the on-chip SoC thermal sensor to Tegra30 device-trees. Now CPU temperature reporting and thermal throttling is available on all Tegra30 devices universally. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-08-13ARM: dts: aspeed: Add Facebook Fuji (AST2600) BMCTao Ren
Add initial version of device tree for Facebook Fuji (AST2600) BMC. Fuji is Facebook's next generation switch platform with an AST2600 BMC integrated for health monitoring purpose. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210805222818.8391-7-rentao.bupt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-08-13ARM: dts: aspeed: Add Facebook Elbert (AST2600) BMCTao Ren
Add initial version of device tree for Facebook Elbert (AST2600) BMC. Elbert is Facebook's next generation switch platform with an AST2600 BMC integrated for health monitoring purpose. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210805222818.8391-6-rentao.bupt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-08-13ARM: dts: aspeed: Add Facebook Cloudripper (AST2600) BMCTao Ren
Add initial version of device tree for Facebook Cloudripper (AST2600) BMC. Cloudripper is Facebook's next generation switch platform with an AST2600 BMC integrated for health monitoring purpose. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210805222818.8391-5-rentao.bupt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-08-13ARM: dts: aspeed: Common dtsi for Facebook AST2600 Network BMCsTao Ren
This common descirption is included by all Facebook AST2600 Network BMC platforms to minimize duplicated device entries across Facebook Network BMC device trees. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210805222818.8391-4-rentao.bupt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-08-13ARM: dts: aspeed: wedge400: Use common flash layoutTao Ren
Simplify wedge400 flash layout by using the common layout defined in "facebook-bmc-flash-layout-128.dtsi". Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210805222818.8391-3-rentao.bupt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-08-13ARM: dts: Add Facebook BMC 128MB flash layoutTao Ren
This is the layout used by Facebook BMC systems. It describes the fixed flash layout of a 128MB mtd device. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210805222818.8391-2-rentao.bupt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-08-12Merge tag 'omap-for-v5.15/dt-am3-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Changes for am3 cpsw and SanCloud for v5.15 A series of changes to update am3 to use cpsw switch driver and few updates to earlier SanCloud changes. The plan was to send the cpsw switch driver changes earlier but looks like I never tagged the mail thread in my inbox to apply for v5.15. * tag 'omap-for-v5.15/dt-am3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-sancloud-bbe: Drop usb wifi comment ARM: dts: am335x-sancloud-bbe: Fix missing pinctrl refs ARM: dts: am335x-bone: switch to new cpsw switch drv ARM: dts: am33xx: update ethernet aliases ARM: dts: am335x-sl50: switch to new cpsw switch drv ARM: dts: am335x-shc: switch to new cpsw switch drv ARM: dts: am335x-phycore: switch to new cpsw switch drv ARM: dts: am335x-pepper: switch to new cpsw switch drv ARM: dts: am335x-pdu001: switch to new cpsw switch drv ARM: dts: am335x-osd3358-sm-red: switch to new cpsw switch drv ARM: dts: am335x-myirtech: switch to new cpsw switch drv ARM: dts: am335x-moxa-uc: switch to new cpsw switch drv ARM: dts: am335x-lxm: switch to new cpsw switch drv ARM: dts: am335x-igep0033: switch to new cpsw switch drv ARM: dts: am335x-cm-t335: switch to new cpsw switch drv ARM: dts: am335x-chiliboard: switch to new cpsw switch drv ARM: dts: am335x-nano: switch to new cpsw switch drv ARM: dts: am335x-baltos: switch to new cpsw switch drv Link: https://lore.kernel.org/r/pull-1628751694-126144@atomide.com-3 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-12Merge tag 'samsung-dt-5.15' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.15 Add CPU topology to all Exynos DTSI files. * tag 'samsung-dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: add CPU topology to Exynos5422 ARM: dts: exynos: add CPU topology to Exynos5420 ARM: dts: exynos: add CPU topology to Exynos5260 ARM: dts: exynos: add CPU topology to Exynos5250 ARM: dts: exynos: add CPU topology to Exynos4412 ARM: dts: exynos: add CPU topology to Exynos4210 ARM: dts: exynos: add CPU topology to Exynos3250 Link: https://lore.kernel.org/r/20210811085128.30103-1-krzysztof.kozlowski@canonical.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-12Merge tag 'amlogic-arm-dt-for-v5.15' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dt Amlogic ARM DT changes for v5.15: - meson8: use a default higher default GPU clock to solve probe failure - meson: add AIU audio controller and codec for ec100 - meson8b: fix pwm regulator supply property name * tag 'amlogic-arm-dt-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: ARM: dts: meson8b: ec100: Fix the pwm regulator supply properties ARM: dts: meson8b: mxq: Fix the pwm regulator supply properties ARM: dts: meson8b: odroidc1: Fix the pwm regulator supply properties ARM: dts: meson8b: ec100: wire up the RT5640 audio codec ARM: dts: meson: Add the AIU audio controller ARM: dts: meson8: Use a higher default GPU clock frequency Link: https://lore.kernel.org/r/87519792-c9e7-76a6-5db5-0e955286b564@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-12Merge tag 'v5.14-next-dts32' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt Increase trip point on MT7623 * tag 'v5.14-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm: dts: mt7623: increase passive cooling trip Link: https://lore.kernel.org/r/289ded1c-dae7-54ef-6b56-9433bfcaf9de@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-12Merge tag 'ixp4xx-dts-arm-soc-v5.15-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt IXP4xx DTS file updates for the v5.15 kernel cycle: - Fix up some (non-urgent) IRQ flags for the PCI buses. - Add the second UART to the generic ixp4xx.dtsi - Make use of the new expansion bus driver in all device trees with e.g. flash memory on the expansion bus. - Adds the CF card slot to the Gateworks GW2358. - Add new device trees for: - Iomega NAS 100D - D-Link DSM-G600 - Netgear WG302v2 - Arcom Vulcan - Gateworks Avila GW2348 - Intel IXPD425 and siblings - Coyote and IXDPG425 - Linksys WRV54G * tag 'ixp4xx-dts-arm-soc-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: ixp4xx: Add a devicetree for Freecom FSG-3 ARM: dts: ixp4xx: Add devicetree for Linksys WRV54G ARM: dts: ixp4xx: Add device trees for Coyote and IXDPG425 ARM: dts: ixp4xx: Add Intel IXDP425 etc reference designs ARM: dts: ixp4xx: Add CF to GW2358 ARM: dts: ixp4xx: Add Gateworks Avila GW2348 device tree ARM: dts: ixp4xx: Add Arcom Vulcan device tree ARM: dts: ixp4xx: Add devicetree for Netgear WG302v2 ARM: dts: ixp4xx: Use the expansion bus ARM: dts: ixp4xx: Add second UART ARM: dts: ixp4xx: Add devicetree for D-Link DSM-G600 rev A ARM: dts: ixp4xx: Move EPBX100 flash to external bus node ARM: dts: ixp4xx: Add devicetree for Iomega NAS 100D ARM: dts: ixp4xx: Fix up bad interrupt flags Link: https://lore.kernel.org/r/CACRpkdY19AvWT--OcmEKbwFue_EcThVs7uZeHkzORten7xj-RA@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-12Merge tag 'stm32-dt-for-v5.15-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT for v5.15, round 1 Highlights: ---------- -MPU: - ST boards: - Add coporcessor detach mailbox on ED and DKx boards - Fix dtbs_check SAI warnings - DH boards: -Fix some dtbs_check warnings: usb, backlight, hdmi * tag 'stm32-dt-for-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: Update AV96 adv7513 node per dtbs_check ARM: dts: stm32: Set {bitclock,frame}-master phandles on ST DKx ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15x-dkx boards ARM: dts: stm32: Add coprocessor detach mbox on stm32mp157c-ed1 board ARM: dts: stm32: Add usbphyc_port1 supply on DHCOM SoM ARM: dts: stm32: Add backlight and panel supply on DHCOM SoM ARM: dts: stm32: Set {bitclock,frame}-master phandles on DHCOM SoM ARM: dts: stm32: Fix touchscreen IRQ line assignment on DHCOM ARM: dts: stm32: Disable LAN8710 EDPD on DHCOM ARM: dts: stm32: Prefer HW RTC on DHCOM SoM Link: https://lore.kernel.org/r/e4f0bea3-4065-38d5-f1b2-007e4094c4a8@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-12Merge tag 'sti-dt-for-v5.15-round1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into arm/dt Highlights: ----------- - Introduce 4KOpen STiH418-b2264 board - Remove clk_ignore_unused from STi boards DT - Remove clock-output-names and clk_critical properties - Update some clock compatible * tag 'sti-dt-for-v5.15-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti: ARM: dts: sti: remove clk_ignore_unused from bootargs for stih410-b2260 ARM: dts: sti: remove clk_ignore_unused from bootargs for stih418-b2199 ARM: dts: sti: remove clk_ignore_unused from bootargs for stih410-b2120 ARM: dts: sti: remove clk_ignore_unused from bootargs for stih407-b2120 ARM: dts: sti: Introduce 4KOpen (stih418-b2264) board ARM: dts: sti: add the thermal sensor node within stih418 ARM: dts: sti: disable rng11 on the stih418 platform ARM: dts: sti: add the spinor controller node within stih407-family ARM: dts: sti: update clkgen-fsyn entries in stih418-clock ARM: dts: sti: update clkgen-fsyn entries in stih410-clock ARM: dts: sti: update clkgen-fsyn entries in stih407-clock ARM: dts: sti: update clkgen-pll entries in stih418-clock ARM: dts: sti: update clkgen-pll entries in stih410-clock ARM: dts: sti: update clkgen-pll entries in stih407-clock ARM: dts: sti: update flexgen compatible within stih410-clock ARM: dts: sti: update flexgen compatible within stih407-clock ARM: dts: sti: update flexgen compatible within stih418-clock Link: https://lore.kernel.org/r/1d95209f-9cb4-47a3-2696-7a93df7cdc05@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-12Merge tag 'omap-for-v5.15/dt-signed' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Devicetree changes for omaps for v5.15 Devicetree changes for omaps to configure more devices, and add support for new SoC variants and devices: - Add add gpio-line-names for am335x-boneblue - Add support for dra762 abz package - Two patches for McASP support on omap4 - Three patches to add support for am335x-sancloud-bbe-lite - A series of changes to configure PRUSS for am3/4/5 * tag 'omap-for-v5.15/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am57xx: Add PRUSS MDIO controller nodes ARM: dts: am57xx: Add PRU-ICSS nodes ARM: dts: am4372: Add PRUSS MDIO controller node ARM: dts: am4372: Add the PRU-ICSS0 DT node ARM: dts: am4372: Add the PRU-ICSS1 DT node ARM: dts: am335x-icev2: Enable PRU-ICSS module ARM: dts: am335x-evmsk: Enable PRU-ICSS module ARM: dts: am335x-evm: Enable PRU-ICSS module ARM: dts: am335x-bone-common: Enable PRU-ICSS node ARM: dts: am33xx-l4: Add PRUSS MDIO controller node ARM: dts: am33xx-l4: Add PRUSS node ARM: dts: am335x-sancloud-bbe-lite: New devicetree ARM: dts: am335x-sancloud-bbe: Extract common code ARM: dts: am335x-boneblack: Extract HDMI config ARM: dts: omap4-l4-abe: Add McASP configuration ARM: dts: omap4-l4-abe: Correct sidle modes for McASP ARM: dts: Add support for dra762 abz package ARM: dts: am335x-boneblue: add gpio-line-names Link: https://lore.kernel.org/r/pull-1628153040-834155@atomide.com-3 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-12Merge tag 'imx-ecspi-5.15' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers i.MX eCSPI errata handling for 5.15: It includes all required changes for handling i.MX6/7 eCSPI errata ERR009165, which causes FIFO transfer to be sent twice in DMA mode. Both SPI and DMA maintainers agree to merge it through arm-soc tree. * tag 'imx-ecspi-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dmaengine: imx-sdma: add terminated list for freed descriptor in worker dmaengine: imx-sdma: add uart rom script dma: imx-sdma: add i.mx6ul compatible name dmaengine: imx-sdma: remove ERR009165 on i.mx6ul spi: imx: remove ERR009165 workaround on i.mx6ul spi: imx: fix ERR009165 dmaengine: imx-sdma: add mcu_2_ecspi script dmaengine: dma: imx-sdma: add fw_loaded and is_ram_script dmaengine: imx-sdma: remove duplicated sdma_load_context Revert "dmaengine: imx-sdma: refine to load context only once" Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores" Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core" Link: https://lore.kernel.org/r/20210809071838.GF30984@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-12ARM: dts: rza: Add I2C interrupt-namesGeert Uytterhoeven
Add "interrupt-names" properties to the I2C device nodes of the RZ/A1H and RZ/A2M DTS files, to make it easier to review the interrupt mappings. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/7a073439e37f6672e4809af0a2ee9cd4ac820ec6.1626267422.git.geert+renesas@glider.be
2021-08-11arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrlHsin-Yi Wang
Move mt8135-pinfunc.h into include/dt-bindings/pinctrl so that we can include it in yaml examples. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Link: https://lore.kernel.org/r/20210804044033.3047296-1-hsinyi@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-10ARM: 9105/1: atags_to_fdt: don't warn about stack sizeDavid Heidelberg
The merge_fdt_bootargs() function by definition consumes more than 1024 bytes of stack because it has a 1024 byte command line on the stack, meaning that we always get a warning when building this file: arch/arm/boot/compressed/atags_to_fdt.c: In function 'merge_fdt_bootargs': arch/arm/boot/compressed/atags_to_fdt.c:98:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] However, as this is the decompressor and we know that it has a very shallow call chain, and we do not actually risk overflowing the kernel stack at runtime here. This just shuts up the warning by disabling the warning flag for this file. Tested on Nexus 7 2012 builds. Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: <stable@vger.kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2021-08-10ARM: 9102/1: move theinstall rules to arch/arm/MakefileMasahiro Yamada
Currently, the (z/u)install targets in arch/arm/Makefile descend into arch/arm/boot/Makefile to invoke the shell script, but there is no good reason to do so. arch/arm/Makefile can run the shell script directly. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2021-08-10ARM: dts: am335x-sancloud-bbe: Drop usb wifi commentPaul Barker
The wifi chip on USB port 4 may not be present on all BBE variants. Signed-off-by: Paul Barker <paul.barker@sancloud.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-08-10ARM: dts: am335x-sancloud-bbe: Fix missing pinctrl refsPaul Barker
pinctrl settings for the USB hub, barometer & accelerometer need to be referenced from the relevant nodes to work. Signed-off-by: Paul Barker <paul.barker@sancloud.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-08-09ARM: dts: imx7: add ftm nodes for Flex TimersThomas Perrot
The i.MX7 has two possible Flex Timers, disabled by default. Moreover, the block is the same as LS1021a, then the drivers can be used as-is. Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-09ARM: dts: imx6qdl-dhcom: Add DHSOM based DRC02 boardChristoph Niedermaier
Add DT for DH DRC02 unit, which is a universal controller device. The system has two ethernet ports, two CANs, RS485 and RS232, USB, capacitive buttons and an OLED display. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>