summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)Author
2015-02-06Merge tag 'v3.20-rockchip-dts3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Merge "ARM: rockchip: third (and last) batch of dts updates for 3.20" from Heiko Stübner: Change are regulator nodes for the cpu and gpu regulators on the act8846 variant of the rk3288-evb and the setting of a clock for the watchdog. Also the lcd and hdmi controllers on both the firefly and the evb get enabled and let us now boot into fbcon console sucessfully. * tag 'v3.20-rockchip-dts3' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb ARM: dts: rockchip: housekeeping off i2c0 on rk3288-evb boards ARM: dts: rockchip: add cpu and gpu regulators to rk3288-evb-act8846 ARM: dts: rockchip: add rk3288 watchdog clock clk: rockchip: add id for watchdog pclk on rk3288 clk: rockchip: add clock IDs for the PVTM clocks clk: rockchip: add clock ID for usbphy480m_src Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-30ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boardsHeiko Stuebner
Currently the hdmi driver is using one of the soc i2c busses for ddc probing and while documentation always specifies i2c5 as hdmi-i2c it could very well be any other bus as well. Therefore this is a property of the board and should be specified there. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-01-30ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evbHeiko Stuebner
This enables the recently added display nodes on the firefly and evb, letting the boards output graphic data over the hdmi port. This includes enabling of i2c5 on the evb that is used for ddc probing and setting the lcd-regulators to always on until the hdmi driver learns about using them. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-01-29ARM: dts: rockchip: housekeeping off i2c0 on rk3288-evb boardsHeiko Stuebner
Use the same transfer speed on both the rk808 and act8846 variants and remove the status=okay from the rk808 one which is already set in the shared rk3288-evb.dtsi . Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-01-29ARM: dts: rockchip: add cpu and gpu regulators to rk3288-evb-act8846Heiko Stuebner
The evaluation board using the act8846 as main pmic uses two additional regulators to provide the cpu and gpu voltage. Add these and also add the link to cpu supply from vdd_cpu. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-01-29Merge tag 'zynq-dt-for-3.20' of https://github.com/Xilinx/linux-xlnx into ↵Olof Johansson
next/dt Merge "Zync DT for v3.20" from Michal Simek: arm: Xilinx Zynq dt patches for v3.20 - Add USB chipidea driver to DT - Add pincontrol - Add aliases node - Fix WDT node * tag 'zynq-dt-for-3.20' of https://github.com/Xilinx/linux-xlnx: ARM: zynq: DT: Add aliases node ARM: zynq: DT: Fix binding for cadence WDT ARM: zynq: DT: Add pinctrl information to USB nodes ARM: zynq: DT: Remove bogus value from 'bias-disable' property ARM: zynq: DT: Add pinctrl information ARM: zynq: DT: Add USB to device tree Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-29Merge tag 'samsung-dt-3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt Merge "Samsung 3rd DT updates for v3.20" from Kukjin Kim: - add DISP1 power domain for support HDMI support on exynos5420/5422/5800 and the power domain node including FIMD1, MIXER and HDMI modules (tested on exynos5420 Peach Pit and exynos5800 Peach Pi Chromebooks and exynos5422 Odroid XU3 by Javier Martinez Canillas) Note this is including a patch for adding clock IDs for the DISP1 power domain with Mike and Sylwester's acks so that could be handled together to avoid non-working. * tag 'samsung-dt-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Add DISP1 power domain for exynos5420 clk: exynos5420: Add IDs for clocks used in DISP1 power domain Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-29Merge tag 'samsung-dt-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt Merge "Samsung 2nd DT updates for v3.20" from Kukjin Kim: - for all of Samsung SoCs : use generic power domain bindings : add 'dr_mode' property for hsotg/dwc2 devices - exynos3250-rinato and exynos3250-monk : add regulator-haptic - exynos5422-odroidxu3 : reduce total RAM by 22 MiB because last 22 MiB for secure monitor cannot be accessed by kernel : add on-board INA231 sensors and LDO26 of PMIC for the sensors * tag 'samsung-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: reduce total RAM by 22 MiB for exynos5422-odroidxu3 ARM: dts: add on-board INA231 sensors for exynos5422-odroidxu3 ARM: dts: Add regulator-haptic node for exynos3250-monk ARM: dts: Add regulator-haptic node for exynos3250-rinato ARM: dts: add 'dr_mode' property to hsotg devices for exynos boards ARM: dts: convert to generic power domain bindings for exynos DT Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-29ARM: digicolor: add minimal device tree descriptionBaruch Siach
cx92755.dtsi describes CX92755 on chip peripherals. cx92755_equinox.dts describes the Equinox evaluation board for the CX92755 SoC. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-29ARM: dts: Add DISP1 power domain for exynos5420Javier Martinez Canillas
The DISP1 power domain on Exynos5420 SoC includes the FIMD1, MIXER and HDMI modules. Add a device node for this power domain and mark these modules as consumer of the DISP1 power domain. When a power domain is powered on and off, the input clocks of the devices attached to it are reparented. So a reference to the input and parent clocks of the devices are needed to manage that. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-28ARM: zynq: DT: Add aliases nodeMichal Simek
Add aliases node to DTs. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-28ARM: zynq: DT: Fix binding for cadence WDTMichal Simek
Based on: "devicetree: Add Cadence WDT devicetree bindings documentation" (sha1: 191891c0378f44aec8e06e889a08d0b76fe6c5cb) - compatible string is cdns,wdt-r1p2 - remove device_type property - remove int reset property (reset-on-timeout is bool) Signed-off-by: Michal Simek <michal.simek@xilinx.com> Series-to: arm-soc Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-28ARM: zynq: DT: Add pinctrl information to USB nodesSoren Brinkmann
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-28ARM: zynq: DT: Remove bogus value from 'bias-disable' propertySoren Brinkmann
In one pinctrl node, a 'bias-disable' property is erroneously assigned a value. Fixes: ARM: zynq: DT: Add pinctrl information Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-28ARM: dts: rockchip: add rk3288 watchdog clockHeiko Stuebner
Add the clock property for the watchdog on rk3288 socs. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org>
2015-01-27Merge tag 'v3.20-rockchip-dts2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Merge "ARM: rockchip: second batch of dts updates for 3.20" from Heiko Stübner: Basic display nodes for crtcs and hdmi encoder, timer node for the broadcast timer going through the clocksource tree and two new boards, the rk3288-based Firefly and the PX2-based Rayeager board (the PX2 is identical to the rk3066 but made for industrial users). * tag 'v3.20-rockchip-dts2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: add dts for ChipSPARK Rayeager PX2 board ARM: dts: rockchip: add dts for Firefly Firefly-RK3288 boards dt-bindings: add vendor prefix and root compatible property for Rockchip boards ARM: dts: rockchip: Add rockchip timer node for rk3288 ARM: dts: rockchip: add rk3288 hdmi nodes ARM: dts: rockchip: Add rk3288 vop and display-subsystem Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-26Merge tag 'at91-dt2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt Merge "at91: dt for 3.20 #2" from Nicolas Ferre: Second DT batch for 3.20: - correct some pin configuration for at91sam9x5ek - add pioD on sama5d4 following a modification of pinctrl driver - add more precise nand compatibility string for sama5d4 - audio modifications for wm8904 or ac97 * tag 'at91-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91/dt: sam9263: Add ac97 device node dt: atmel_ac97c: Add device tree documentation ARM: at91: at91sam9n12ek/dt: use dt ids for wm8904 ARM: at91: sama5d3xek/dt: use dt ids for wm8904 ARM: at91: sama5d4: dts: change the nand compatible string ARM: at91/dt: sama5d4: add pioD controller ARM: at91/dt: disable pull-up on vbus-gpio (PB16) to reduce power consumption Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-26Merge tag 'sunxi-dt-for-3.20' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt Merge "Allwinner device tree changes for 3.20" from Maxime Ripard: A lot of changes to the device tree for the 3.20 merge window, mostly with: - More DT license convertions, only two DTS and two DTSI are still uncertain and have not been converted yet - Use the C-preprocessor includes in the device trees. - Add support for the A31s SoC and improve the A80 support - Add IR receiver, lradc, PS/2 support - Add cpufreq support for all SoCs but the A23 and A80. - And a lot of new boards * tag 'sunxi-dt-for-3.20' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (64 commits) ARM: dts: sun5i: Enable axp209 support on A13-OLinuxIno ARM: sunxi: dts: Add A10/A20 PS2 pin muxing options ARM: sunxi: dts: Add PS2 nodes to dtsi for A10,A20 ARM: dts: sun6i: Add resistive touchscreen controller node to dtsi ARM: dts: sun4i: Add Hyundau A7HD board ARM: dts: sun4i: Add Marsboard A10 board ARM: dts: sun9i: Enable mmc2 on A80 Optimus Board ARM: dts: sun9i: Add 8 bit mmc pinmux setting for mmc2 ARM: dts: sun9i: Enable mmc0 on A80 Optimus Board ARM: dts: sun9i: Convert a80 optimus board dts to label referencing ARM: dts: sun9i: Add mmc controller nodes to the A80 dtsi ARM: dts: sun9i: Add mmc config clock nodes ARM: dts: sunxi: Add missing mdio label ARM: dts: sun5i: Add mk802_a10s board ARM: dts: sun4i: Add mk802ii board ARM: dts: sun4i: Add mk802 board ARM: dts: sun4i: Add dts file for Chuwi V7 CW0825 tablet ARM: dts: sun7i: Add dts file for Bananapro board ARM: sun6i: Enable ARM arch timers ARM: dts: sun6i: Convert hummingbird a31 dts to label references ... Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-26Merge tag 'samsung-dt' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt Merge "Samsung DT updates for v3.20" from Kukjin Kim: - exynos3250 : add exynos_usbphy node and hsotg nodes - exynos3250-rinato : enable usb : cleanup and use macro for gpio-keys : add fimd and Panel devices support - exynos3250-monk : enable usb : cleanup and use macro for gpio-keys - exynos5250-snow : add power and lid gpio-keys pinctrl - exynos5420-peach-pit and exynos5800-peach-pi : configure regulators for suspend : set always on for USB webCam regulators : add lid GPIO key device - exynos5422 : add support new board Odroid XU3 - dt-bindings : add exynos-chipid * tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Configure regulators for suspend on exynos Peach boards ARM: dts: Set Peach boards USB WebCam regulators to always on ARM: dts: Add lid GPIO key device node for Peach boards ARM: dts: Add power and lid GPIO keys pinctrl for exynos5250-snow Documentation: dt-bindings: add exynos-chipid binding information ARM: dts: add Panel device support for exynos3250-rinato ARM: dts: add fimd device support for exynos3250-rinato ARM: dts: use macro in gpio keys for exynos3250 boards ARM: dts: remove unnecessary gpio-key nodes for exynos3250 boards ARM: dts: Enable USB node for exynos3250-monk ARM: dts: Enable USB node for exynos3250-rinato ARM: dts: Add hsotg node for exynos3250 ARM: dts: Add exynos_usbphy node for exynos3250 ARM: dts: Add dts file for Odroid XU3 board Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-26ARM: dts: re-fromat AT91 part to match other entriesNicolas Ferre
The entries are separated as ARM V4/V5 and ARM V7 as some other per-SoC config options may be removed in the near future. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-26ARM: at91/dt: sam9263: Add ac97 device nodeAlexander Stein
This adds the device node for the ac97 controller. Signed-off-by: Alexander Stein <alexanders83@web.de> Acked-By Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-26ARM: at91: at91sam9n12ek/dt: use dt ids for wm8904Bo Shen
Using the device tree ids for wm8904 codec. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-26ARM: at91: sama5d3xek/dt: use dt ids for wm8904Alexander Morozov
Using the wm8904 device tree compatible string. Signed-off-by: Alexander Morozov <linux@meltdown.ru> Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-26ARM: at91: sama5d4: dts: change the nand compatible stringJosh Wu
As we introduce a new "atmel,sama5d4-nand" compatible string for sama5d4, so we need to apply it for sama5d4 chip. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-26ARM: dts: rockchip: add dts for ChipSPARK Rayeager PX2 boardFUKAUMI Naoki
This add support for Rayeager PX2, Rockchip PX2 based development board made by ChipSPARK. Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com> Tested-by: Andy Yan <andy.yan@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-01-26ARM: dts: rockchip: add dts for Firefly Firefly-RK3288 boardsFUKAUMI Naoki
This adds support for Firefly-RK3288, Rockchip RK3288 based development boards made by Firefly. There are 2 dts for 2 versions of the board. rk3288-firefly-beta.dts is for the beta version, rk3288-firefly.dts is for the mass production version. Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com> [removed gmac reference, due to the gmac node going through the net-tree] Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-01-25ARM: dts: rockchip: Add rockchip timer node for rk3288Daniel Lezcano
The rk3288 board uses the architected timers and these ones are shutdown when the cpu is powered down. There is a need of a broadcast timer in this case to ensure proper wakeup when the cpus are in sleep mode and a timer expires. Add the timer node for the broadcast timer. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-01-25ARM: dts: sun5i: Enable axp209 support on A13-OLinuxInoHans de Goede
The (non micro) A13-OLinuxIno has an axp203 pmic, enable support for this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-25ARM: sunxi: dts: Add A10/A20 PS2 pin muxing optionsVishnu Patekar
Signed-off-by: VishnuPatekar <vishnupatekar0510@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-25ARM: sunxi: dts: Add PS2 nodes to dtsi for A10,A20Vishnu Patekar
Signed-off-by: VishnuPatekar <vishnupatekar0510@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-24ARM: dts: sun6i: Add resistive touchscreen controller node to dtsiChen-Yu Tsai
Now that we support the sun6i variant of the touchscreen controller, add the device node to the dtsi so we can use it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-24ARM: dts: reduce total RAM by 22 MiB for exynos5422-odroidxu3Marek Szyprowski
Last 22 MiB is RAM is reserved by secure monitor code and cannot be accessed from Linux kernel, so adjust total RAM size to 0x7EA00000 (2 GiB - 22 MiB). This fixes random 'imprecise kernel abort' kernel failures. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-24ARM: dts: add on-board INA231 sensors for exynos5422-odroidxu3Kevin Hilman
The odroid-xu3 has 4 INA231 current sensors on board which can be accessed from the Linux via the hwmon interface. There is one sensor for each of these power rails: - A15 cluster: VDD_ARM - A7 cluster: VDD_KFC - GPU: VDD_G3D - memory: VDD_MEM In addition to adding the sensors, LDO26 from the PMIC needs to be enabled because it's powering these sensor. Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Cc: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-24ARM: dts: Add regulator-haptic node for exynos3250-monkJaewon Kim
This patch adds regulator-haptic device node controlled by regulator. Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-24ARM: dts: Add regulator-haptic node for exynos3250-rinatoJaewon Kim
This patch adds regulator-haptic device node controlled by regulator. Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-24ARM: dts: add 'dr_mode' property to hsotg devices for exynos boardsMarek Szyprowski
All currently supported boards use hsotg/dwc2 controller in device ('peripheral') mode, so add property which sets correct operation mode. This patch fixes support in recent changes in dwc2 driver, which added support for dual-role devices. Suggested-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-24ARM: dts: convert to generic power domain bindings for exynos DTMarek Szyprowski
This patch replaces all custom samsung,power-domain dt properties with generic power domain bindings and updates documentation Samsung's devices referring to old binding. Suggested-by: Kevin Hilman <khilman@kernel.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> [javier.martinez@collabora.co.uk: tested on the Exynos5800 Peach Pi Chromebook] Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-01-23Merge tag 'tegra-for-3.20-dt' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Merge "ARM: tegra: Device tree changes for v3.20" from Thierry Reding: A couple of unit addresses fixes in device trees, addition of microphone detection on Chromebook 13 and a vendor prefix update. * tag 'tegra-for-3.20-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Update isl29028 compatible string to use isil vendor prefix ARM: tegra: Fix unit address for Cortex-A9 TWD timer ARM: dts: tegra20: fix GR3D, DSI unit and reg base addresses ARM: tegra: Enable the mic-detect gpio on Acer Chromebook 13 Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-23ARM: dts: imx6q: sort dtbs in makefileOlof Johansson
Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-23Merge tag 'imx-dt-3.20' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt Merge "ARM: imx: device tree changes for 3.20" from Shawn Guo: The i.MX device tree update for 3.20: - Update i.MX6 operating-points setting in device tree to match the latest i.MX6 data sheet - Add i.MX6SX sabreauto board support - Add imx6dl-udoo board support based off imx6q-udoo - Update sabrelite board to include I2C and HDMI support - Update the VPU compatible strings to also use cnm,coda<model> - Remove the ocram clock from the VPU node, as the clock is already provided inside the ocram node - Add system reset controller and syscon-reboot for VF610 - Update VF610 device tree to use zero based naming for GPIO nodes, so that the number scheme matches hardware manual - A number of random device additions like watchdog for VF610, sahara for i.MX53, QSPI for imx6sx-sdb board, etc. Note: the branch imx/soc was merged into imx/dt because the SNVS device tree node needs to refer to the new clock ID added by the imx/soc patch. * tag 'imx-dt-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (28 commits) ARM: dts: imx28-evk: remove duplicate property ARM: vf610: use zero based naming for GPIO nodes ARM: dts: imx6q: enable dma for ecspi5 ARM: dts: vfxxx: Add SNVS node ARM: imx: clk-vf610: Add clock for SNVS ARM: imx: clk-vf610: Add clock for UART4 and UART5 ARM: imx: drop CPUIDLE_FLAG_TIME_VALID from cpuidle-imx6sx ARM: dts: imx6dl-udoo: Add board support based off imx6q-udoo ARM: imx: support arm power off in cpuidle for i.mx6sx ARM: imx: remove unnecessary setting for DSM ARM: dts: imx6sx: add i.mx6sx sabreauto board support ARM: dts: imx6sx-sdb: Add QSPI support ARM: dts: imx6qdl: Remove OCRAM clock from VPU node ARM: imx: apf51dev: add gpio-backlight support ARM: imx: correct the hardware clock gate setting for shared nodes ARM: imx: pllv3: add shift for frequency multiplier ARM vf610: add compatibilty strings of supported Vybrid SoC's ARM: i.MX53: dts: add sahara module ARM: dts: imx6dl: correct cpufreq volt/freq table ARM: dts: imx6q: update cpufreq volt/freq table ... Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-23Merge tag 'v3.20-next-dts2' of https://github.com/mbgg/linux-mediatek into ↵Olof Johansson
next/dt Merge "ARM: mediatek: DT changes for v3.20 (round 2)" from Matthias Brugger: This adds uart support for mt6592 SoC. * tag 'v3.20-next-dts2' of https://github.com/mbgg/linux-mediatek: ARM: mediatek: dts: Add uart to mt6592 Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-23Merge tag 'mvebu-dt-3.20-2' of git://git.infradead.org/linux-mvebu into next/dtOlof Johansson
Merge "mvebu/dt #2" from Andrew Lunn: Second set of dt patches for mvebu for v3.20. * tag 'mvebu-dt-3.20-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: make DTS comments reflect DEBUG_LL changes ARM: mvebu: Armada 385 GP: Add regulators to the SATA port ARM: Kirkwood: Added support for pogoplug e02 (pink/gray) ARM: mvebu: fix compatible strings of MBus on Armada 375 and Armada 38x dt: bindings: update mvebu-mbus DT binding with new compatible properties Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-23Merge tag 'v3.20-rockchip-dts1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Merge "ARM: rockchip: soc updates for 3.20" [sic!] from Heiko Stübner: dts part of core suspend support and limiting of rk3288 sd-card clockspeed to 150mhz * tag 'v3.20-rockchip-dts1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: add suspend settings for rk3288-evb-rk808 ARM: dts: rockchip: add RK3288 suspend support ARM: dts: rockchip: set dw_mmc max-freq 150Mhz Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-23Merge tag 'bcm5301x-dt-2015-01-20' of https://github.com/hauke/linux into ↵Olof Johansson
next/dt Merge "ARM: BCM5301X: DT changes for v3.20" from Hauke Mehrtens: bcm5301x-dt-2015-01-20: ARM: BCM5301X: dts updates for 3.20 * tag 'bcm5301x-dt-2015-01-20' of https://github.com/hauke/linux: ARM: BCM5301X: Add DT for Buffalo WZR-900DHP ARM: BCM5301X: Add LEDs for Buffalo devices ARM: BCM5301X: Drop unused poll-interval from gpio-keys ARM: BCM5301X: Add DT for Luxul XWC-1000 Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-23Merge tag 'omap-for-v3.20/dt-pt2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "omap device tree changes for v3.20, part 2" from Tony Lindgren: More changes for omap dts files mostly to add support for dm816x devices and clocks. Also adds a qspi device for dra72x-evm. * tag 'omap-for-v3.20/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra72-evm: Add qspi device ARM: dts: Add minimal support for dm8168-evm ARM: dts: Add basic clocks for dm816x ARM: dts: Add basic dm816x device tree configuration Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-23ARM: dts: sun4i: Add Hyundau A7HD boardHans de Goede
The Hyundai A7HD is a 7" 16:9 A10 powered tablet featuring 1G RAM, 8G nand, 1024x600 IPS screen, a mini hdmi port, mini usb receptacle and a headphones port for details see: http://linux-sunxi.org/Hyundai_A7HD Cc: Mark Janssen <maniac@maniac.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-23ARM: at91/dt: sama5d4: add pioD controllerLudovic Desroches
PioD controller was not described in the device tree since we don't use it. As pinctrl-at91 allows disabled gpio controllers in the device tree, we can add it to complete the device description. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-22ARM: dts: rockchip: add rk3288 hdmi nodesAndy Yan
Add an hdmi node, and also add hdmi endpoints to vopb and vopl output port nodes. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Signed-off-by: Yakir Yang <ykk@rock-chips.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Tested-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-01-22ARM: dts: rockchip: Add rk3288 vop and display-subsystemDaniel Kurtz
Add devicetree nodes for rk3288 VOP (Video Output Processors), and the top level display-subsystem root node. Later patches add endpoints (eDP, HDMI, LVDS, etc) that attach to the VOPs' output ports. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Mark yao <mark.yao@rock-chips.com> Reviewed-by: Stephane Marchesin <marcheu@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-01-21Merge tag 'qcom-dt-for-3.20' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/dt Merge "qcom DT changes for v3.20" from Kumar Gala: Qualcomm ARM Based Device Tree Updates for v3.20 * Correct IPQ8064 tlmm interrupt * Add Support for SD Card Detect for ifc6410 board * tag 'qcom-dt-for-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom: ARM: dts: qcom: Correct IPQ8064 tlmm interrupt ARM: dts: qcom: Add Support for SD Card Detect for ifc6410 board Signed-off-by: Olof Johansson <olof@lixom.net>