summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/Makefile
AgeCommit message (Collapse)Author
2017-06-29Merge tag 'actions-arm-dt-for-4.13' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/dt Pull "Actions Semi ARM based SoC DT for v4.13" from Andreas Färber: This adds an initial DT for the S500 SoC and a devboard based on it. * tag 'actions-arm-dt-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions: ARM: dts: owl-s500: Add SPS node ARM: dts: owl-s500: Set CPU enable-method dt-bindings: arm: cpus: Add S500 enable-method ARM: dts: Add Actions Semi S500 and LeMaker Guitar dt-bindings: arm: Document Actions Semi S900 dt-bindings: timer: Document Owl timer dt-bindings: arm: Document Actions Semi S500 dt-bindings: Add vendor prefix for Actions Semi
2017-06-18Merge tag 'imx-dt-4.13' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt The i.MX device tree updates for 4.13: - New board support: Gateworks Ventana GW5600, Technexion Pico i.MX7D Board. - A series from Alexandre Belloni to correct the vendor prefix for rv4162 compatible. - A patch-set from Andrey Smirnov ot enable PCIe support for i.MX7 and imx7d-sdb board. - Increase the SGTL5000 LRCLK pad strength to fix a random audio channel swapping seen on imx6qdl-wandboard and imx6qdl-colibri boards. - Clean up non-existing property 'enable-active-low' from fixed regulator device nodes. - Correct GPIO polarity for Ethernet PHY and PCI reset lines, even though device drivers do not use the polarity for now. - Add Wifi and Bluetooth support for imx7d-sdb board. - Adopt the i.MX6Q/DL DT to the new and more flexible GPC binding. - Update zii-rdu2 device tree source to use #include "..." for local inclusion. - A series from Philipp Zabel and Steve Longerbeam to enable video capture support for imx6qdl platforms. - A number of small random updates on various board support. * tag 'imx-dt-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (47 commits) ARM: dts: imx6q-cm-fx6: add sdio wifi/bt nodes ARM: dts: ls1021a: update the clockgen node ARM: dts: imx6-sabreauto: add the ADV7180 video decoder ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b ARM: dts: imx6-sabreauto: create i2cmux for i2c3 ARM: dts: imx6-sabresd: add OV5642 and OV5640 camera sensors ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround ARM: dts: imx6qdl: add capture-subsystem device ARM: dts: imx6qdl: Add video multiplexers, mipi_csi, and their connections ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node ARM: dts: imx6qdl: add multiplexer controls ARM: dts: imx6: Fix PCI GPIO reset polarity ARM: dts: imx7d-sdb: Add Bluetooth support ARM: dts: imx7d-sdb: Add Wifi support ARM: dts: imx7d-sdb: Adjust the regulator nodes ARM: dts: imx: Fix Ethernet PHY reset polarity ARM: dts: imx7: Fix typo in watchdog pin name ARM: dts: vf610-zii: Add switch eeprom-length properties ... Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18Merge tag 'mvebu-dt-4.13-1' of git://git.infradead.org/linux-mvebu into next/dtOlof Johansson
mvebu dt for 4.13 (part 1) - Add Linksys WRT3200ACM (Rango) support - Add PWM properties for gpio on Aramda XP and 38x - A couple of minor updates for the 98dx3236 and 98dx4251 * tag 'mvebu-dt-4.13-1' of git://git.infradead.org/linux-mvebu: ARM: dts: turris-omnia: Add generic compatible string for I2C EEPROM ARM: dts: mvebu: add support for Linksys WRT3200ACM (Rango) ARM: dts: armada-385-linksys: fixup button node names ARM: dts: armada-385-linksys: group pins in pinctrl ARM: dts: armada-385-linksys: partition layout is board specific ARM: dts: armada-385-linksys: use binary unit prefixes ARM: dts: armada-385-linksys: drop legacy DSA bindings ARM: dts: armada-385-linksys: usb3 label cleanup ARM: dts: armada-385-linksys: bm pools by label order ARM: dts: armada-385-linksys: drop redundant properties in dependants ARM: dts: armada-385-linksys: flatten dependants ARM: dts: armada-385-linksys: label nodes ARM: dts: armada-385-linksys: flatten dtsi ARM: dts: mvebu: disable the rtc on 98dx3236 SoC ARM: dts: mvebu: add missing interrupt to 98dx4251 switch ARM: dts: armada-xp: Use pwm-fan rather than gpio-fan ARM: dts: mvebu: Add PWM properties for armada-38x ARM: dts: mvebu: Add PWM properties to .dtsi files Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18Merge tag 'renesas-dt2-for-v4.13' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Second Round of Renesas ARM Based SoC DT Updates for v4.13 Cleanup: * Correct PCI bus dtc warnings for r8a779x SoCs Enhancements: * Add support for iWave G20D-Q7 board based on RZ/G1M SoC * Add support for GR-Peach board based on r7s72100 SoC * Add composite video and HDMI input to gose board * tag 'renesas-dt2-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: dts: r8a779x: Fix PCI bus dtc warnings ARM: dts: iwg20d-q7: Add support for iWave G20D-Q7 board based on RZ/G1M ARM: dts: iwg20m: Add iWave RZG1M Qseven SOM ARM: dts: gose: add composite video input ARM: dts: r7s72100: Add support for GR-Peach ARM: dts: gose: add HDMI input Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18Merge tag 'tegra-for-4.13-arm-dt' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt ARM: tegra: Device tree changes for v4.13-rc1 This removes support for the Whistler board, which only a handful of people ever had access to and which doesn't provide any features over other Tegra20 devices that we support. Also this cleans up some PCI related device tree content in preparation for a future DTC release that has additional checks for the PCI bus. * tag 'tegra-for-4.13-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: dts: tegra: fix PCI bus dtc warnings ARM: tegra: remove Whistler support Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18Merge tag 'sunxi-dt-for-4.13' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Allwinner DT changes for 4.13 The usual chunk of patches. The most notable improvements are the power supplies improvements (battery and AC-IN), crypto support for the sun5i family, HDMI support for the A10s, plus a lot of new things for the V3S and the A83T. * tag 'sunxi-dt-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (47 commits) ARM: sun6i: a31s: primo81: Enable battery power supply ARM: sun6i: a31s: primo81: Change USB OTG to OTG mode ARM: sun8i: a83t: Add dt node for the syscon control module ARM: sun8i: a83t: Add device node for R_PIO ARM: sun8i: v3s: add device nodes for DE2 display pipeline ARM: dts: sunxi: add SoC specific compatibles for the crypto nodes ARM: sun5i: add a cryptographic engine node ARM: sun8i: a83t: Add device node for PRCM ARM: dts: sun8i: h3: Add initial NanoPi M1 Plus support ARM: dts: orange-pi-zero: add node for SPI NOR ARM: sun7i: a20: cubietruck: Tie AXP209's USB power supply to USB PHY ARM: sun6i: a31: hummingbird: Enable AXP221's ACIN power supply ARM: sun4i: a10: cubieboard: Enable AXP209's ACIN power supply ARM: sun7i: a20: bananapi-m1-plus: Enable AXP209's ACIN power supply ARM: sun7i: a20: cubieboard2: Enable AXP209's ACIN power supply ARM: sun7i: a20: cubieboard2: Move usb_otg node for alphabetical ordering ARM: sun8i: a83t: cubietruck-plus: Enable SPDIF output ARM: sun8i: a83t: cubietruck-plus: Add LED device nodes ARM: sun8i: a83t: Add device node for SPDIF transmitter ARM: sun8i: a83t: Add device node for DMA controller ... Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18Merge tag 'arm-soc/for-4.13/devicetree' of ↵Olof Johansson
http://github.com/Broadcom/stblinux into next/dt This pull request contains Broadcom ARM-based Device Tree changes for 4.13. Note that Baruch's changes are fixes that are currently included in v4.12-rc2, but they are also included here in order to keep this tag based off v4.12-rc1. Please pull the following: - Rafal adds CPU and thermal zones to the Northstar (BCM5301X) Device Tree and he also adds the MDIO controller nodes for later use by USB PHYs - Eric adds support for the V3D engine and Ethernet switch on the Cygnus platforms, he also adds a set of Device Tree sources and include files for the Raspberry Pi 3 (BCM2837) to be used with the ARM/Linux kernel, - Jon adds CPU and thermal zones to the Northstar Plus Device Tree files - Stefan updates the Raspberry Pi DTS files with thermal trip points and zones, adds support for the USB OTG on the Raspberry Pi Zero which includes the proper dwc2 configuration, a generic USB PHY and finally the enabling of the OTG controller by including the proper DTS include file - Gerd switches the Raspberry Pi DTS files to use the SDHOST controller (faster than the SDHCI) * tag 'arm-soc/for-4.13/devicetree' of http://github.com/Broadcom/stblinux: ARM: dts: bcm2835-rpi-zero: Enable OTG mode ARM: dts: bcm283x: Add generic USB PHY ARM: dts: bcm283x: Add dtsi for OTG mode ARM: dts: Cygnus: Add the ethernet switch and ethernet PHY ARM: dts: NSP: Add Thermal Support ARM: dts: Cygnus: Add BCM11360's V3D device ARM: dts: BCM5301X: Specify MDIO bus in the DT ARM: dts: BCM5301X: Add CPU thermal sensor and zone ARM: dts: bcm283x: switch from &sdhci to &sdhost ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6) Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18Merge tag 'stm32-dt-for-v4.13-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/dt STM32 DT updates for v4.13, round 1 Highlights: ---------- - Add stm32h743-disco board support - Add stm32f746-disco board support - Add stm32f769-disco board support - Enable LTDC & simple pannel on stm32f429-eval - Enable Watchdog on stm32f429-eval - Enable DCMI on stm32f429-eval - Enable STMPE1600 io expander on stm32f429-eval - Enable OV2640 camera on stm32f429-eval - Enable CRC on stm32f429-eval & stm32f429-disco * tag 'stm32-dt-for-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: Add stm32h743i-disco board ARM: dts: stm32: Add usart2 support on stm32h743 ARM: dts: stm32: Add usart2_pins on stm32h743 ARM: dts: stm32: enable CRC32 on stm32429i-eval board ARM: dts: stm32: enable CRC32 on stm32429-disco board ARM: dts: stm32: Add CRC support to stm32f429 ARM: dts: stm32: Enable OV2640 camera support of STM32F429-EVAL board ARM: dts: stm32: Enable STMPE1600 gpio expander of STM32F429-EVAL board ARM: dts: stm32: Enable DCMI camera interface on STM32F429-EVAL board ARM: dts: stm32: Enable DCMI support on STM32F429 MCU ARM: dts: stm32: Add missing reset-cells node in stm32f746 ARM: dts: stm32: Set gpio controller as interrupt controller on F4 and F7 ARM: dts: stm32: Add watchdog support for STM32F429 eval board ARM: dts: stm32: Add watchdog support for STM32F429 SoC ARM: dts: stm32: Enable ltdc & simple panel on stm32f429-Eval board ARM: dts: stm32: Add ltdc support on stm32f429 MCU ARM: dts: stm32: add stm32f769I & stm32f746 discovery board support Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18Merge tag 'keystone_dts_for_4.13' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt ARM: dts: Keystone K2G ICE EVM support for v4.13 * tag 'keystone_dts_for_4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: dts: keystone: Add minimum support for K2G ICE evm ARM: keystone: Create new binding for K2G ICE evm ARM: dts: k2g-evm: Add unit address to memory node ARM: dts: keystone-k2g: Remove skeleton.dtsi Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18Merge tag 'v4.13-rockchip-dts32-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt A bunch of changes including mali gpu nodes for rk3288 boards following (and including) the new Mali Midgard binding; a lot of improvements for the rk3228/rk3229 socs (tsadc, operating points, usb, clock-rates, pinctrl, watchdog); finalizing the rk1108->rv1108 rename and adc buttons for the rk3288 firefly boards. * tag 'v4.13-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: enable usb for rk3229 evb board ARM: dts: rockchip: add usb nodes on rk322x ARM: dts: rockchip: add adc button for Firefly ARM: dts: rockchip: enable ARM Mali GPU on rk3288-veyron ARM: dts: rockchip: enable ARM Mali GPU on rk3288-firefly ARM: dts: rockchip: enable ARM Mali GPU on rk3288-rock2-som ARM: dts: rockchip: add ARM Mali GPU node for rk3288 dt-bindings: gpu: add bindings for the ARM Mali Midgard GPU ARM: dts: rockchip: set a sane frequence for tsadc on rk322x ARM: dts: rockchip: add operating-points-v2 for cpu on rk322x ARM: dts: rockchip: set default rates for core clocks on rk322x ARM: dts: rockchip: add second uart2 pinctrl on rk322x ARM: dts: rockchip: correct rk322x uart2 pinctrl ARM: dts: rockchip: add watchdog device node on rk322x clk: rockchip: add clock-ids for more rk3228 clocks clk: rockchip: add ids for camera on rk3399 ARM: dts: rockchip: fix rk322x i2s1 pinctrl error ARM: dts: rockchip: rename RK1108-evb to RV1108-evb ARM: dts: rockchip: rename core dtsi from RK1108 to RV1108 ARM: dts: rockchip: Setup usb vbus-supply on rk3288-rock2 Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-19ARM: dts: Add Actions Semi S500 and LeMaker GuitarAndreas Färber
Add Device Trees for Actions Semiconductor S500 SoC and LeMaker Guitar SoM and base board. Signed-off-by: Andreas Färber <afaerber@suse.de>
2017-06-17ARM: dts: mvebu: add support for Linksys WRT3200ACM (Rango)Ralph Sennhauser
The Linksys WRT3200ACM (Rango) is the lates Armada-385 based router in the Linksys WRT AC Series which got released in October 2016. Key differences to the earlier Armada-385 based devices in the series is a bigger flash chip, next generation wireless modules (Marvell 88W8964) in the mini pcie slots as well as a Marvell SD8887. Finally the CPU is clocked at 1866 GHz by default. The file armada-385-linksys-rango.dts is loosly based off of a DTS authored by Imre Kaloz. As Rango is part of the armada-385-linksys family of boards use the armada-385-linksys.dtsi as basis. As for functional differences to Imre Kaloz dts, the wlan LEDs aren't connected to the expander chip pca9635 but directly to GPIOs. Then mpp47 controls the USB2.0 port and not the USB3.0 port, so use the correct GPIO mpp44 for it. Finally use non-removable instead of broken-cd with the sdhci node to avoid polling. Other changes can be categorized as just cleanup / reorganization due to using the armada-385-linksys.dtsi. URL: https://github.com/openwrt/openwrt/blob/0abc3fa5a996daf7dafdc7794ccfe3fa7e955c5a/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-linksys-rango.dts Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-06-13ARM: tegra: remove Whistler supportStephen Warren
Whistler is an ancient Tegra 2 reference board. I may have been the only person who ever used it with upstream software, and I've just recycled the board hardware. Hence, it makes sense to remove support from software. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-06-12ARM: dts: iwg20d-q7: Add support for iWave G20D-Q7 board based on RZ/G1MBiju Das
Add support for iWave RainboW-G20D-Qseven board based on RZ/G1M. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-06-12ARM: dts: r7s72100: Add support for GR-PeachJacopo Mondi
Add device tree source for Renesas GR-Peach board. GR-Peach is an RZ/A1H based board with 10MB of on-chip SRAM and 8MB QSPI flash storage. Add support for the board, and create a 2MB partition to use as rootfs. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-06-09ARM: dts: stm32: Add stm32h743i-disco boardPatrice Chotard
Add basic support for stm32h743i-discovery board This board offers : _ 2MBytes Flash _ 1 x micro USB OTG port _ 1 x STLink connector (micro USB) _ 1 x micro SD card slot _ 1 x RJ45 connector _ 1 x RCA connector _ 2 x Audio jack connectors (in and out) _ 2 x speaker connectors (left and right) _ 1 x joystick _ 1 x DCMI connector (Digital camera interface) _ 1 x 4 inch DSI LCD (Display Serial Interface) _ Arduino Uno Connectors _ 2 x PIO connectors (PMOD and PMOD+) _ 1 x wakeup button _ 1 x reset button Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-06-07ARM: dts: stm32: add stm32f769I & stm32f746 discovery board supportVikas Manocha
Stm32f769I & stm32f746 are MCUs of stm32f7 family. Here are the major specs of the two boards: stm32f769I discovery board: - Cortex-M7 core @216MHz - 2MB mcu internal flash - 512KB internal sram - 16MB sdram memory - 64MB qspi flash memory - 4 inch wvga LCD-TFT Display stm32f746 discovery board: - Cortex-M7 core @216MHz - 1MB mcu internal flash - 320KB internal sram - 8MB sdram memory - 16MB qspi flash memory - 4.3 inch 480x272 LCD-TFT display Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-06-06ARM: dts: Add am335x-boneblueRobert Nelson
BeagleBone Blue is robotics-oriented version of the BeagleBone Black (BBB). This board can be indentified by the BLAx value after A335BNLT (BBB) in the at24 eeprom: BLAx [aa 55 33 ee 41 33 33 35 42 4e 4c 54 42 4c 41 30 |.U3.A335BNLTBLA2|] http://beagleboard.org/blue https://github.com/beagleboard/beaglebone-blue firmware: https://github.com/beagleboard/beaglebone-black-wireless/tree/master/firmware wl18xx mac address: /proc/device-tree/ocp/ethernet@4a100000/slave@4a100200/mac-address Signed-off-by: Robert Nelson <robertcnelson@gmail.com> CC: Jason Kridner <jkridner@beagleboard.org> CC: Drew Fustini <drew@beagleboard.org> Acked-by: Jason Kridner <jkridner@beagleboard.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-05-31ARM: dts: sun8i: h3: Add initial NanoPi M1 Plus supportJagan Teki
NanoPi M1 Plus is designed and developed by FriendlyElec for professionals, enterprise users, makers and hobbyists using the Allwinner H3 SOC. NanoPi M1 Plus key features - Allwinner H3, Quad-core Cortex-A7@1.2GHz - 1GB DDR3 RAM - 8GB eMMC - microSD slot - 10/100/1000M Ethernet - Serial Debug Port - 5V 2A DC power-supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-05-21ARM: dts: keystone: Add minimum support for K2G ICE evmFranklin S Cooper Jr
Add barebones dts support for TI's K2G Industrial Communication Engine evm. This dts allows the board to boot using a ram based filesystem. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2017-05-21ARM: dts: imx7d-pico: Add initial supportVanessa Maegima
Add the initial support for imx7d-pico board. Add support for eMMC, USB host, USB device, PMIC, Ethernet and audio. For more information about this board, please visit: http://www.technexion.org/products/pico/pico-som/pico-imx7-emmc Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-05-18ARM: sun8i: v3s: add support for Lichee Pi Zero w/ dock boardIcenowy Zheng
The Lichee Pi Zero board has a "dock board" which needs to be soldered with the 1.27mm stamp holes on a Lichee Pi Zero board. It features: - Onboard MIC and headphone jack (not supported yet) - Ethernet port (not supported yet) - An extra MicroSD slot connected to MMC1 controller - four keys connected to the LRADC. As it needs to be soldered with the main board to use, add a stand-alone device tree for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-05-15ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6)Eric Anholt
Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for now, so it's useful to be able to test that mode on an upstream kernel. It's also been useful for me to use the same board for 32-bit and 64-bit development. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Olof Johansson <olof@lixom.net>
2017-05-15ARM: dts: imx: add Gateworks Ventana GW5600 supportTim Harvey
The Gateworks Ventana GW5600 is a media-centric single-board computer based on the NXP IMX6 SoC with the following features: * PoE (emulated 802.3af) * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q) * 1GiB DDR3 DRAM (supports up to 4GiB) * 8GB eMMC * 1x microSD connector * Gateworks System Controller: - hardware watchdog - hardware monitor - pushbutton controller - EEPROM storage - power control * 1x bi-color USER LED * 1x front-panel pushbutton * 1x front-panel GbE * 2x front panel USB 2.0 * 1x front panel USB OTG * 1x SIM socket * 1x miniPCIe socket with SATA (mSATA) * 1x miniPCIe socket with USB 2.0 (Modem) * 1x miniPCIe socket with PCIe, USB 2.0, and SIM * RS232/RS485 serial - 2x RS232 UARTs (off-board connector) - 1x RS485 (loading option) * 4x digital I/O signals (PWM/I2C/GPIO/5V/3.3V options) * 1x analog input (0 to 5V) * 1x CAN (loading option) * off-board LVDS: - I2C - 12V - LED driver (4x 330mA strings) - matrix keypad controller (8row x 10col) - I2S - dual-channel LVDS - PWM * off-board video input: - 16bit parallel / MIPI (IPU1_CSI0) * GPS (loading option) * Analog Video Input (CVBS) 3 inputs (1 active at a time) * Analog Audio Input/Output (2ch Line level, optional MIC/HP drivers) * HDMI out * JTAG programmable * Inertial Module Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-05-14ARM: dts: rockchip: rename RK1108-evb to RV1108-evbAndy Yan
Rockchip finally named the SOC as RV1108, so change it for compatible. The rk1108/rv1108 is completely new to the market, so there no real devices exist in the wild, only the Rockchip internal evaluation board. Therefore we're not breaking any existing devices when changing compatible values. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Acked-by: Rob Herring <robh@kernel.org> [added paragraph about no real devices existing] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-04-19Merge tag 'imx-dt-4.12' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt i.MX device tree updates for 4.12: - New board support: I2SE's i.MX28 Duckbill-2 boards, Gateworks Ventana i.MX6 GW5903/GW5904, Zodiac Inflight Innovations RDU2 board, Engicam i.CoreM6 Quad/Dual OpenFrame modules, Boundary Device i.MX6 Quad Plus SOM. - Improve compatible string for i.MX50 eSDHC, i.MX7S SRC devices and i.MX6SX UART device. - Add interrupts for switch and PHY devices on VF610 ZII Devel C board. - Add LVDS, LCD backlight, touchscreen and SAI2 support for i.MX6 icore, geam, and isiot boards. - A series from Lucas Stach to improve i.MX6Q Plus device tree and add PRE/PRG devices. - A series from Stefan Agner to update imx7-colibri device tree regarding to display, PMIC/regulator support. - Fix PCI bus DTC warnings seen with the latest compiler. - Set default phy_type and dr_mode for i.MX25 USBOTG port. - A couple of small improvements on i.MX25 pin function DT header. - Add audio support for imx6q-cm-fx6 board using Wolfson wm8731 codec which is muxed to SSI2 device. - Other random updates, small fixes and trivial cleanups. * tag 'imx-dt-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (56 commits) ARM: dts: imx6q-utilite-pro: add hpd gpio ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply ARM: dts: imx6qdl-sabresd: Set LDO regulator supply ARM: dts: imx: add Gateworks Ventana GW5903 support ARM: dts: i.MX25: add AIPS control registers ARM: dts: imx7-colibri: add Carrier Board 3.3V/5V regulators ARM: dts: imx7-colibri: remove 1.8V fixed regulator ARM: dts: imx7-colibri: allow to disable Ethernet rail ARM: dts: imx7-colibri: fix PMIC voltages ARM: dts: imx7-colibri: use OF graph to describe the display ARM: dts: imx6qp-nitrogen6_som2: add Quad Plus variant of the SOM ARM: dts: imx6q-icore: Add touchscreen node ARM: dts: vf610-zii-dev-rev-b: change switch2 label ARM: dts: imx6ul-[geam|isiot]: Add sai2 node ARM: dts: imx6ul-isiot-common: Add touchscreen node ARM: dts: imx6ul-isiot: Add i2c nodes ARM: dts: imx6ul-isiot: Add imx6ul-isiot-common.dtsi ARM: dts: imx6ul-isiot: Add backlight support for lcdif ARM: dts: imx6ul-geam: Add backlight support for lcdif ARM: dts: imx6: add ZII RDU2 boards ... Signed-off-by: Olof Johansson <olof@lixom.net>
2017-04-19Merge tag 'v4.12-rockchip-dts32-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Support for the usb-sata controller on the rock2 and another new rk3288 board, the phyCORE som and its PCM-947 carrier board from Phytec. * tag 'v4.12-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Add support for PCM-947 carrier board dt-bindings: Document Phytec phyCORE-RK3288 RDK ARM: dts: rockchip: Add support for phyCORE-RK3288 SoM ARM: dts: rockchip: Enable sata support on rock2 square Signed-off-by: Olof Johansson <olof@lixom.net>
2017-04-19Merge tag 'sunxi-dt-for-4.12' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Allwinner DT changes for 4.12 As usual a number of changes, among which: - All the sun5i DTSI has been reworked based on the new documentation and the IPs that are actually found in all those SoCs. Part of that rework also brought the GR8 DTSI to include sun5i.dtsi - Mali devfreq and thermal throttling support on the A33 - AC power supplies for the AXP209 and AXP22X PMIC - CAN support for the A20 - CPUFreq-based thermal throttling for the A33 - New board: NanoPi NEO Air * tag 'sunxi-dt-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (38 commits) ARM: sun8i: sina33: add highest OPP of CPUs ARM: sun8i: a33: Add devfreq-based GPU cooling ARM: sun8i: a33: add CPU thermal throttling ARM: sun8i: a33: add thermal sensor ARM: dts: sun7i: fix device node ordering ARM: dts: sun4i: fix device node ordering ARM: dts: sun7i: Add can0_pins_a pinctrl settings ARM: dts: sun7i: Add CAN node ARM: dts: sun4i: Add can0_pins_a pinctrl settings ARM: dts: sun4i: Add CAN node ARM: sun7i: cubietruck: enable ACIN und USB power supply subnode ARM: dts: sun5i: Add interrupt for display backend dt-bindings: display: sun4i: Add display backend interrupt to device tree binding ARM: dts: sun7i: Use axp209.dtsi on A20-OLinuXino-Micro ARM: dts: sun6i: sina31s: Enable SPDIF out ARM: sun8i: sina33: add cpu-supply ARM: sun8i: a33: add all operating points ARM: sun5i: chip: enable ACIN power supply subnode ARM: dts: sun8i: sina33: enable ACIN power supply subnode ARM: dtsi: axp22x: add AC power supply subnode ... Signed-off-by: Olof Johansson <olof@lixom.net>
2017-04-19Merge tag 'stm32-dt-for-v4.12-1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/dt STM32 DT updates for v4.12, round 1 Highlights: ---------- - ADD RTC support on STM32F746 MCU - Enable RTC on STM32F746 Eval board - Enable clocks on STM32F746 MCU - Enable DMA, pwm1 and pwm3 on STM32F429I Eval - Add support of STM32H743 MCU and his Eval board - Enable USB HS and FS on STM32F469 Disco board * tag 'stm32-dt-for-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: dt-bindings: Document the STM32 USB OTG DWC2 core binding ARM: dts: stm32: Enable USB HS in FS mode (embedded phy) on stm32f429-disco ARM: dts: stm32: Enable USB FS on stm32f469-disco ARM: dts: stm32: Add USB FS support for STM32F429 MCU ARM: dts: stm32: Add STM32H743 MCU and STM32H743i-EVAL board ARM: dts: stm32: Enable pwm1 and pwm3 on stm32f429i-eval ARM: dts: stm32: Enable dma by default on stm32f4 adc ARM: dts: stm32: enable RTC on stm32746g-eval ARM: dts: stm32: Add RTC support for STM32F746 MCU ARM: dts: stm32: set HSE_RTC clock frequency to 1 MHz on stm32f746 dt-bindings: mfd: Add STM32F7 RCC numeric constants into DT include file ARM: dts: stm32: Enable clocks for STM32F746 MCU Signed-off-by: Olof Johansson <olof@lixom.net>
2017-04-10ARM: dts: imx: add Gateworks Ventana GW5903 supportTim Harvey
The Gateworks Ventana GW5903 is a single-board computer based on the NXP IMX6 SoC with the following features: * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q) * 4GiB DDR3 DRAM * 32GB eMMC * 1x microSD connector * Gateworks System Controller: - hardware watchdog - hardware monitor - pushbutton controller - EEPROM storage - power control * JTAG programmable * Inertial Module * uBlox EMMY-W1 (bluetooth/nfc/802.11ac) Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-04-10ARM: dts: imx6qp-nitrogen6_som2: add Quad Plus variant of the SOMGary Bisson
https://boundarydevices.com/product/nit6x-som-v2/ Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-04-10ARM: dts: imx6: add ZII RDU2 boardsLucas Stach
This adds support for the Zodiac Inflight Innovations RDU2 board, which has both a Quad and a QuadPlus variant. The board supports different panels, with the bootloader patching in the correct compatible, depending on the hardware configuration. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-04-10ARM: dts: imx: add Gateworks Ventana GW5904 supportTim Harvey
The Gateworks Ventana GW5904 is a single-board computer based on the NXP IMX6 SoC with the following features: * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q) * 2048MB DDR3 DRAM (4x64bit) (options up to 4GiB) * 8GB eMMC * Gateworks System Controller: - hardware watchdog - hardware monitor - pushbutton controller - EEPROM storage - power control * JTAG programmable * 1x miniPCIe socket (with PCIe, USB) * 1x miniPCIe socket (USB) * 1x M.2 socket (USB, 2x SIM) * Inertial Module (LSM9DS1 9DOF: 3x acc, 3x rate, 3x mag) * GPS (optional uBlox EVA-M8M) * Application headers: - 2x RS232 UART (TX/RX/CTS/RTS) - 8x TTL GPIO (3x configurable as PWM) - 1x LVDS display 3D+C with i2c touch and PWM backlight * MV88E6176 GbE Switch (uplink to IMX FEC) * Front panel connectors: - 1x user programmable LED - 1x configurable user pushbutton - 1x USB OTG - 4x GbE LAN Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-04-10ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 12.3 initial ↵Jagan Teki
support i.CoreM6 Quad/Dual OpenFrame modules are "system on modules plus openframe display carriers" which are good solution for develop user friendly graphic user interface. General features: CPU NXP i.MX6Q rev1.2 at 792 MHz RAM 1GB, 32, 64 bit, DDR3-800/1066 NAND SLC,512MB LVDS Display TFT 12.3" industrial, 1280x480 resolution Backlight LED backlight, brightness 350 Cd/m2 Power supply 15 to 30 Vdc Cc: Domenico Acri <domenico.acri@engicam.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-04-10ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 10.1 initial ↵Jagan Teki
support i.CoreM6 Quad/Dual OpenFrame modules are "system on modules plus openframe display carriers" which are good solution for develop user friendly graphic user interface. General features: CPU NXP i.MX6Q rev1.2 at 792 MHz RAM 1GB, 32, 64 bit, DDR3-800/1066 NAND SLC,512MB LVDS Display TFT 10.1" industrial, 1280x800 resolution Backlight LED backlight, brightness 350 Cd/m2 Power supply 15 to 30 Vdc Cc: Domenico Acri <domenico.acri@engicam.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-04-10ARM: dts: imx7d-sdb: Add sht11 Click Board supportMarco Franchi
The imx7d-sdb has a mickro bus connector that can be connected to a Sensirion SHT11 click board (temperature and humidity sensor): https://shop.mikroe.com/click/sensors/sht1x Add a new device tree file to describe such hardware. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-04-10ARM: dts: add support for I2SE Duckbill 2 SPIMichael Heimpold
This machine is based on I2SE's Duckbill 2 board and is sold as part of I2SE's PLC Bundle for IoT. This is a development kit for Homeplug Green PHY based powerline products based on Qualcomms QCA7000 chip. Signed-off-by: Michael Heimpold <mhei@heimpold.de> Cc: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-04-10ARM: dts: add support for I2SE Duckbill 2 EnOceanMichael Heimpold
This machine is based on I2SE's Duckbill 2 board and features a EnOcean daugther board based on the popular TCM310 chipset. This product is intended to be used for e.g. home automation purposes. Signed-off-by: Michael Heimpold <mhei@heimpold.de> Cc: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-04-10ARM: dts: add support for I2SE Duckbill 2 485Michael Heimpold
This machine is based on I2SE's Duckbill 2 board and features a RS-485 daugther board. This device is intended to be used for e.g. home automation purposes. Signed-off-by: Michael Heimpold <mhei@heimpold.de> Cc: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-04-10ARM: dts: add support for I2SE Duckbill 2 boardsMichael Heimpold
This machine is an USB pen drive sized development board, based on NXP's i.MX28 CPU. In contrast to the previous model "Duckbill", the "Duckbill 2" series has internal eMMC storage. Signed-off-by: Michael Heimpold <mhei@heimpold.de> Cc: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-04-06ARM: dts: rockchip: Add support for PCM-947 carrier boardWadim Egorov
Add basic support for the PCM-947 carrier board, a RK3288 based development board made by PHYTEC. This board works in a combination with the phyCORE-RK3288 System on Module. Following interfaces and devices are available on the PCM-947 carrier board: - 2x UART - micro SDMMC - USB host and USB otg - USB 3503 HSIC hub - Ethernet - 2nd alternative KSZ9031 ethernet phy - Display connectors: PHYTEC LVDS, DDG LVDS, parallel signals, HDMI - Parallel Camera CIF - SGTL5000-32QFN audio codec - 4x LEDs connected via PCA9533 - 2 user buttons - Expansion connectors for WiFi and other modules - RTC RV-4162-C7 - Resistive touch STMPE811 - EEPROM M24C32 Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-03-31Merge tag 'v4.12-rockchip-dts32-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Pull "Rockchip dts32 updates for 4.12 part1" from Heiko Stübner: Contains one new board, the Tinkerboard from Asus based on the rk3288, definitions for the mmc resets in the socs reset controller, sound support for the Rock2, dma support for mmc controllers on the rk3188 and a led-fix for the MiQi board and and irq-fix for older Cortex-A9 socs. * tag 'v4.12-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: setup DMA-channels for mmc0 and emmc for rk3188 ARM: dts: rockchip: fix PPI misconfiguration on Cortex-A9 socs ARM: dts: rockchip: add rk322x dw-mmc resets ARM: dts: rockchip: add rk3066/rk3188 dw-mmc resets ARM: dts: rockchip: add rk3036 dw-mmc resets ARM: dts: rockchip: add rk3288 dw-mmc resets ARM: dts: rockchip: add dts for RK3288-Tinker board dt-bindings: add rk3288-based Asus Tinker board ARM: dts: rockchip: fix the MiQi board's LED definition ARM: dts: rockchip: Add support for ES8388 to the Radxa Rock 2
2017-03-31Merge tag 'arm-soc/for-4.12/devicetree' of ↵Arnd Bergmann
http://github.com/Broadcom/stblinux into next/dt Pull "Broadcom devicetree changes for 4.12" from Florian Fainelli: This pull request contains Broadcom ARM-based SoCs Device Tree updates for 4.12, please pull the following: - Rafal: * adds basic support for the Linksys EA9200, Linksys EA6300 V1, Linksys EA9500, TP-Link Archer C5 V2 which are all based on BCM470x SoCs with a bunch of BCM43602 radios. * updates the BCM5301X DTS and DTS include file and moves the serial console parameters to the DTS include file since all BCM5301X that we have so far are consistent in using the same UART. He also does the same for the BCM53573 DTS. * makes some updates to the Tenda AC9 platform by describing its PCIe controllers and endpoints in order to be able to represent GPIOs attached to the on-chip Wi-Fi module. Once done, he adds the 2Ghz LED which is connected to one of these GPIOs. * re-licenses the DTS files he created to the ISC license * removes the use of the non-existend "default-off" LED trigger in the BCM53573 and BCM5301X DTS files - Aditya adds missing Netgear R8000 LEDS and keys for WAN status LEDS and brightness - Jon: * adds NAND controller Device Tree nodes to the BCM953012K reference board * converts the BCM5301X SoC to use the recently introduced Broadcom QSPI controller Device Tree nodes. * fixes the GIC PPI interrupt flags that the kernel now reports about. * adds ARM TWD watchdog entries to the BCM5301X DTS include file * adds I2C entries to the BCM5301X DTS include files. * disables i2c by default in the Northstar Plus DTS include file, and ,enables it at the board level instead. * adds USB (OHCI & EHCI) Device Tree nodes to the Northstar Plus DTS include files. - Steven adds the mailbox (PDC) unit and the crytographic unit (SPU) to the Broadcom Northstar Plus SoC DTS include file. Steven also adds proper ethernet aliases to the BCM53012HR board since some bootloaders require that for MAC address patching. - Eric adds the DSI and its corresponding clock nodes to the BCM283x DTS files but leaves them disabled by default (overlays should take care of enabling it) - Boris adds support for HDMI audio and related DMA channels to the BCM283x SoCs - Gerd adds support for the BCM2835 specific SDHCI controller to the BCM283x SoCs - Rob fixes the iProc msi-controller name and unit address now that DTC can produce additional errors * tag 'arm-soc/for-4.12/devicetree' of http://github.com/Broadcom/stblinux: (27 commits) ARM: dts: bcm: fix msi-controller name and unit address ARM: dts: BCM53573: Specify serial console parameters ARM: dts: BCM5301X: Specify serial console params in dtsi files ARM: dts: NSP: Add crypto (SPU) to dtsi ARM: dts: NSP: Add mailbox (PDC) to NSP ARM: dts: BCM953012HR: Add ethernet aliases ARM: dts: BCM5301X: Add support for TP-LINK Archer C5 V2 ARM: dts: NSP: disable i2c DT entry by default ARM: dts: NSP: Add EHCI/OHCI USB nodes to device tree ARM: dts: BCM5301X: Add I2C support to the DT ARM: dts: BCM5301X: Add TWD WD Support to DT ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags ARM: dts: bcm2835: add sdhost controller to devicetree ARM: dts: bcm283x: Add HDMI audio related properties ARM: dts: BCM5301X: Don't use nonexistent "default-off" LED trigger ARM: dts: BCM53573: Don't use nonexistent "default-off" LED trigger ARM: dts: BCM5301X: Add missing Netgear R8000 LEDs and Keys ARM: dts: BCM5301X: Relicense DTS files I created to the ISC ARM: dts: bcm2835: Add the DSI module nodes and clocks. ARM: dts: BCM53573: Add Tenda AC9 2 GHz LED ...
2017-03-31Merge tag 'mvebu-dt-4.12-1' of git://git.infradead.org/linux-mvebu into next/dtArnd Bergmann
Pull "mvebu dt for 4.12 (part 1)" from Gregory CLEMENT: - Add node lable for Armada 38x - Add support for Synology DS116 NAS and Linksys WRT1900ACS - Update mbus controller description on Armada 38x allowing entering in standby - Add default trigger for sata led on various linksys boards - Update newly added armada-xp-98dx3236 - Enable hardware buffer manager support for the devices in the Linksys WRT AC Serie * tag 'mvebu-dt-4.12-1' of git://git.infradead.org/linux-mvebu: ARM: dts: mvebu: linksys: enable buffer manager support ARM: dts: mvebu: remove unnecessary PCI range from 98dx3236 ARM: dts: mvebu: Move mv98dx3236 clock bindings ARM: dts: Use armada-370-xp as a base for armada-xp-98dx3236 ARM: dts: armada-xp-98dx3236: combine dfx server nodes ARM: dts: armada: Add default trigger for sata led ARM: dts: armada-38x: Adjust mbus controller description on Armada 38x ARM: dts: armada-385: add support for the Linksys WRT1900ACS (Shelby) ARM: dts: armada-385-synology-ds116: add support for Synology DS116 NAS ARM: dts: armada-38x add node labels
2017-03-24ARM: dts: stm32: Add STM32H743 MCU and STM32H743i-EVAL boardAlexandre TORGUE
Add basic support for STM32H743 MCU and his eval board. The STMicrolectornics's STM32H743 MCU is based on Cortex-M7 core running up to @400MHz with 2MB internal flash and 1MB internal RAM. For more details see: Documentation/arm/stm32/stm32h743-overview.txt Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2017-03-21Merge tag 'renesas-dt-for-v4.12' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Renesas ARM Based SoC DT Updates for v4.12 Cleanup: * Drop superfluous status update for frequency override on various boards * Always use status "okay" to enable devices on porger board * Add INTC-SYS clock to device tree of various SoCs * Tidyup Audio-DMAC channel for DVC on r8a779[013] SoCs * Remove unit-address and reg from integrated cache on various SoCs * Switch from ARCH_SHMOBILE_MULTI to ARCH_RENESAS * Fix SCIFB0 dmas indentation on r8a774[35] SoCs Enhancements: * Add watchdog timer to r7s72100 SoC * Update sdhi clock bindings on r7s72100 SoC * tag 'renesas-dt-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (31 commits) ARM: dts: silk: Drop superfluous status update for frequency override ARM: dts: alt: Drop superfluous status update for frequency override ARM: dts: gose: Drop superfluous status update for frequency override ARM: dts: porter: Drop superfluous status update for frequency override ARM: dts: koelsch: Drop superfluous status updates for frequency overrides ARM: dts: lager: Drop superfluous status update for frequency override ARM: dts: marzen: Drop superfluous status update for frequency override ARM: dts: bockw: Drop superfluous status update for frequency override ARM: dts: porter: Always use status "okay" to enable devices ARM: dts: r8a7793: Add INTC-SYS clock to device tree ARM: dts: r8a7793: Tidyup Audio-DMAC channel for DVC ARM: dts: r8a7791: Tidyup Audio-DMAC channel for DVC ARM: dts: r8a7794: Add INTC-SYS clock to device tree ARM: dts: r8a7792: Add INTC-SYS clock to device tree ARM: dts: r8a7791: Add INTC-SYS clock to device tree ARM: dts: r8a7790: Add INTC-SYS clock to device tree ARM: dts: r8a73a4: Add INTC-SYS clock to device tree ARM: dts: r7s72100: Add watchdog timer ARM: dts: r8a7790: Tidyup Audio-DMAC channel for DVC ARM: dts: r8a7794: Remove unit-address and reg from integrated cache ... Signed-off-by: Olof Johansson <olof@lixom.net>
2017-03-18ARM: dts: BCM5301X: Add support for TP-LINK Archer C5 V2Rafał Miłecki
This is BCM47081A0 based home router with BCM43217 and BCM4352 wireless chipsets. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-03-12ARM: dts: add a devicetree for Wiliboard WBD-222Linus Walleij
This devicetree is simply based on the board file in arch/arm/mach-gemini/board-wbd222.c and contain the equivalent platform data, mainly just moving the GPIOs from the global numberspace to explicitly reference their parent GPIO. Cc: Janos Laube <janos.dev@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-12ARM: dts: add a devicetree for Wiliboard WBD-111Linus Walleij
This devicetree is simply based on the board file in arch/arm/mach-gemini/board-wbd111.c and contain the equivalent platform data, mainly just moving the GPIOs from the global numberspace to explicitly reference their parent GPIO. Cc: Janos Laube <janos.dev@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-03-12ARM: dts: add a devicetree for Teltonika RUT1xxLinus Walleij
This devicetree is simply based on the board file in arch/arm/mach-gemini/board-rut1xx.c and contain the equivalent platform data, mainly just moving the GPIOs from the global numberspace to explicitly reference their parent GPIO. Cc: Janos Laube <janos.dev@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>