| Age | Commit message (Collapse) | Author |
|---|
|
In confidential computing usages, whether a page is private or shared is
necessary information for KVM to perform operations like page fault
handling, page zapping etc. There are other potential use cases for
per-page memory attributes, e.g. to make memory read-only (or no-exec,
or exec-only, etc.) without having to modify memslots.
Introduce the KVM_SET_MEMORY_ATTRIBUTES ioctl, advertised by
KVM_CAP_MEMORY_ATTRIBUTES, to allow userspace to set the per-page memory
attributes to a guest memory range.
Use an xarray to store the per-page attributes internally, with a naive,
not fully optimized implementation, i.e. prioritize correctness over
performance for the initial implementation.
Use bit 3 for the PRIVATE attribute so that KVM can use bits 0-2 for RWX
attributes/protections in the future, e.g. to give userspace fine-grained
control over read, write, and execute protections for guest memory.
Provide arch hooks for handling attribute changes before and after common
code sets the new attributes, e.g. x86 will use the "pre" hook to zap all
relevant mappings, and the "post" hook to track whether or not hugepages
can be used to map the range.
To simplify the implementation wrap the entire sequence with
kvm_mmu_invalidate_{begin,end}() even though the operation isn't strictly
guaranteed to be an invalidation. For the initial use case, x86 *will*
always invalidate memory, and preventing arch code from creating new
mappings while the attributes are in flux makes it much easier to reason
about the correctness of consuming attributes.
It's possible that future usages may not require an invalidation, e.g.
if KVM ends up supporting RWX protections and userspace grants _more_
protections, but again opt for simplicity and punt optimizations to
if/when they are needed.
Suggested-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/all/Y2WB48kD0J4VGynX@google.com
Cc: Fuad Tabba <tabba@google.com>
Cc: Xu Yilun <yilun.xu@intel.com>
Cc: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20231027182217.3615211-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a new KVM exit type to allow userspace to handle memory faults that
KVM cannot resolve, but that userspace *may* be able to handle (without
terminating the guest).
KVM will initially use KVM_EXIT_MEMORY_FAULT to report implicit
conversions between private and shared memory. With guest private memory,
there will be two kind of memory conversions:
- explicit conversion: happens when the guest explicitly calls into KVM
to map a range (as private or shared)
- implicit conversion: happens when the guest attempts to access a gfn
that is configured in the "wrong" state (private vs. shared)
On x86 (first architecture to support guest private memory), explicit
conversions will be reported via KVM_EXIT_HYPERCALL+KVM_HC_MAP_GPA_RANGE,
but reporting KVM_EXIT_HYPERCALL for implicit conversions is undesriable
as there is (obviously) no hypercall, and there is no guarantee that the
guest actually intends to convert between private and shared, i.e. what
KVM thinks is an implicit conversion "request" could actually be the
result of a guest code bug.
KVM_EXIT_MEMORY_FAULT will be used to report memory faults that appear to
be implicit conversions.
Note! To allow for future possibilities where KVM reports
KVM_EXIT_MEMORY_FAULT and fills run->memory_fault on _any_ unresolved
fault, KVM returns "-EFAULT" (-1 with errno == EFAULT from userspace's
perspective), not '0'! Due to historical baggage within KVM, exiting to
userspace with '0' from deep callstacks, e.g. in emulation paths, is
infeasible as doing so would require a near-complete overhaul of KVM,
whereas KVM already propagates -errno return codes to userspace even when
the -errno originated in a low level helper.
Report the gpa+size instead of a single gfn even though the initial usage
is expected to always report single pages. It's entirely possible, likely
even, that KVM will someday support sub-page granularity faults, e.g.
Intel's sub-page protection feature allows for additional protections at
128-byte granularity.
Link: https://lore.kernel.org/all/20230908222905.1321305-5-amoorthy@google.com
Link: https://lore.kernel.org/all/ZQ3AmLO2SYv3DszH@google.com
Cc: Anish Moorthy <amoorthy@google.com>
Cc: David Matlack <dmatlack@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20231027182217.3615211-10-seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Introduce a "version 2" of KVM_SET_USER_MEMORY_REGION so that additional
information can be supplied without setting userspace up to fail. The
padding in the new kvm_userspace_memory_region2 structure will be used to
pass a file descriptor in addition to the userspace_addr, i.e. allow
userspace to point at a file descriptor and map memory into a guest that
is NOT mapped into host userspace.
Alternatively, KVM could simply add "struct kvm_userspace_memory_region2"
without a new ioctl(), but as Paolo pointed out, adding a new ioctl()
makes detection of bad flags a bit more robust, e.g. if the new fd field
is guarded only by a flag and not a new ioctl(), then a userspace bug
(setting a "bad" flag) would generate out-of-bounds access instead of an
-EINVAL error.
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Message-Id: <20231027182217.3615211-9-seanjc@google.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.7
- Generalized infrastructure for 'writable' ID registers, effectively
allowing userspace to opt-out of certain vCPU features for its guest
- Optimization for vSGI injection, opportunistically compressing MPIDR
to vCPU mapping into a table
- Improvements to KVM's PMU emulation, allowing userspace to select
the number of PMCs available to a VM
- Guest support for memory operation instructions (FEAT_MOPS)
- Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
bugs and getting rid of useless code
- Changes to the way the SMCCC filter is constructed, avoiding wasted
memory allocations when not in use
- Load the stage-2 MMU context at vcpu_load() for VHE systems, reducing
the overhead of errata mitigations
- Miscellaneous kernel and selftest fixes
|
|
KVM x86 Documentation updates for 6.7:
- Fix various typos, notably a confusing reference to the non-existent
"struct kvm_vcpu_event" (the actual structure is kvm_vcpu_events, plural).
- Update x86's kvm_mmu_page documentation to bring it closer to the code
(this raced with the removal of async zapping and so the documentation is
already stale; my bad).
- Document the behavior of x86 PMU filters on fixed counters.
|
|
KVM/riscv changes for 6.7
- Smstateen and Zicond support for Guest/VM
- Virtualized senvcfg CSR for Guest/VM
- Added Smstateen registers to the get-reg-list selftests
- Added Zicond to the get-reg-list selftests
- Virtualized SBI debug console (DBCN) for Guest/VM
- Added SBI debug console (DBCN) to the get-reg-list selftests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.7
Add LoongArch's KVM support. Loongson 3A5000/3A6000 supports hardware
assisted virtualization. With cpu virtualization, there are separate
hw-supported user mode and kernel mode in guest mode. With memory
virtualization, there are two-level hw mmu table for guest mode and host
mode. Also there is separate hw cpu timer with consant frequency in
guest mode, so that vm can migrate between hosts with different freq.
Currently, we are able to boot LoongArch Linux Guests.
Few key aspects of KVM LoongArch added by this series are:
1. Enable kvm hardware function when kvm module is loaded.
2. Implement VM and vcpu related ioctl interface such as vcpu create,
vcpu run etc. GET_ONE_REG/SET_ONE_REG ioctl commands are use to
get general registers one by one.
3. Hardware access about MMU, timer and csr are emulated in kernel.
4. Hardwares such as mmio and iocsr device are emulated in user space
such as IPI, irqchips, pci devices etc.
|
|
* kvm-arm64/writable-id-regs:
: Writable ID registers, courtesy of Jing Zhang
:
: This series significantly expands the architectural feature set that
: userspace can manipulate via the ID registers. A new ioctl is defined
: that makes the mutable fields in the ID registers discoverable to
: userspace.
KVM: selftests: Avoid using forced target for generating arm64 headers
tools headers arm64: Fix references to top srcdir in Makefile
KVM: arm64: selftests: Test for setting ID register from usersapce
tools headers arm64: Update sysreg.h with kernel sources
KVM: selftests: Generate sysreg-defs.h and add to include path
perf build: Generate arm64's sysreg-defs.h and add to include path
tools: arm64: Add a Makefile for generating sysreg-defs.h
KVM: arm64: Document vCPU feature selection UAPIs
KVM: arm64: Allow userspace to change ID_AA64ZFR0_EL1
KVM: arm64: Allow userspace to change ID_AA64PFR0_EL1
KVM: arm64: Allow userspace to change ID_AA64MMFR{0-2}_EL1
KVM: arm64: Allow userspace to change ID_AA64ISAR{0-2}_EL1
KVM: arm64: Bump up the default KVM sanitised debug version to v8p8
KVM: arm64: Reject attempts to set invalid debug arch version
KVM: arm64: Advertise selected DebugVer in DBGDIDR.Version
KVM: arm64: Use guest ID register values for the sake of emulation
KVM: arm64: Document KVM_ARM_GET_REG_WRITABLE_MASKS
KVM: arm64: Allow userspace to get the writable masks for feature ID registers
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/sgi-injection:
: vSGI injection improvements + fixes, courtesy Marc Zyngier
:
: Avoid linearly searching for vSGI targets using a compressed MPIDR to
: index a cache. While at it, fix some egregious bugs in KVM's mishandling
: of vcpuid (user-controlled value) and vcpu_idx.
KVM: arm64: Clarify the ordering requirements for vcpu/RD creation
KVM: arm64: vgic-v3: Optimize affinity-based SGI injection
KVM: arm64: Fast-track kvm_mpidr_to_vcpu() when mpidr_data is available
KVM: arm64: Build MPIDR to vcpu index cache at runtime
KVM: arm64: Simplify kvm_vcpu_get_mpidr_aff()
KVM: arm64: Use vcpu_idx for invalidation tracking
KVM: arm64: vgic: Use vcpu_idx for the debug information
KVM: arm64: vgic-v2: Use cpuid from userspace as vcpu_id
KVM: arm64: vgic-v3: Refactor GICv3 SGI generation
KVM: arm64: vgic-its: Treat the collection target address as a vcpu_id
KVM: arm64: vgic: Make kvm_vgic_inject_irq() take a vcpu pointer
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some very small driver fixes for 6.6-final that have shown up
in the past two weeks. Included in here are:
- tiny fastrpc bugfixes for reported errors
- nvmem register fixes
- iio driver fixes for some reported problems
- fpga test fix
- MAINTAINERS file update for fpga
All of these have been in linux-next this week with no reported
problems"
* tag 'char-misc-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
fpga: Fix memory leak for fpga_region_test_class_find()
fpga: m10bmc-sec: Change contact for secure update driver
fpga: disable KUnit test suites when module support is enabled
iio: afe: rescale: Accept only offset channels
nvmem: imx: correct nregs for i.MX6ULL
nvmem: imx: correct nregs for i.MX6UL
nvmem: imx: correct nregs for i.MX6SLL
misc: fastrpc: Unmap only if buffer is unmapped from DSP
misc: fastrpc: Clean buffers on remote invocation failures
misc: fastrpc: Free DMA handles for RPC calls with no arguments
misc: fastrpc: Reset metadata buffer to avoid incorrect free
iio: exynos-adc: request second interupt only when touchscreen mode is used
iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScale
iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholds
dt-bindings: iio: add missing reset-gpios constrain
|
|
Change the maintainer for the Intel MAX10 BMC Secure Update driver from
Russ Weight to Peter Colberg. Update the ABI documentation contact
information as well.
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Acked-by: Peter Colberg <peter.colberg@intel.com>
Link: https://lore.kernel.org/r/20230928164753.278684-1-russell.h.weight@intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Link: https://lore.kernel.org/r/20231023032857.902699-2-yilun.xu@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- mapphone-mdm6600 runtime pm & pinctrl handling fixes
- Qualcomm qmp usb pcs register fixes, qmp pcie register size warning
fix, m31 fixes for wrong pointer in PTR_ERR and dropping wrong vreg
check, qmp combo fix for 8550 power config register
- realtek usb fix for debugfs_create_dir() and kconfig dependency
* tag 'phy-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: realtek: Realtek PHYs should depend on ARCH_REALTEK
phy: qualcomm: Fix typos in comments
phy: qcom-qmp-combo: initialize PCS_USB registers
phy: qcom-qmp-combo: Square out 8550 POWER_STATE_CONFIG1
phy: qcom: m31: Remove unwanted qphy->vreg is NULL check
phy: realtek: usb: Drop unnecessary error check for debugfs_create_dir()
phy: qcom: phy-qcom-m31: change m31_ipq5332_regs to static
phy: qcom: phy-qcom-m31: fix wrong pointer pass to PTR_ERR()
dt-bindings: phy: qcom,ipq8074-qmp-pcie: fix warning regarding reg size
phy: qcom-qmp-usb: split PCS_USB init table for sc8280xp and sa8775p
phy: qcom-qmp-usb: initialize PCS_USB registers
phy: mapphone-mdm6600: Fix pinctrl_pm handling for sleep pins
phy: mapphone-mdm6600: Fix runtime PM for remove
phy: mapphone-mdm6600: Fix runtime disable on probe
|
|
Pull rust fixes from Miguel Ojeda:
- GCC build: fix bindgen build error with '-fstrict-flex-arrays'
- Error module: fix the description for 'ECHILD' and fix Markdown
style nit
- Code docs: fix logo replacement
- Docs: update docs output path
- Kbuild: remove old docs output path in 'cleandocs' target
* tag 'rust-fixes-6.6' of https://github.com/Rust-for-Linux/linux:
rust: docs: fix logo replacement
kbuild: remove old Rust docs output path
docs: rust: update Rust docs output path
rust: fix bindgen build error with fstrict-flex-arrays
rust: error: Markdown style nit
rust: error: fix the description for `ECHILD`
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
2nd set of IIO fixes for the 6.6 cycle.
Note, given timing my expectation is these will be queued for the
6.7 merge window but they could go quicker if the 6.6 cycle ends up
being extended.
afe:
* Allow for channels with offset but no scale. In this case the scale
can be assumed to be 1.
adi,ad74115:
* Add missing dt-binding constraint on number of reset-gpios.
samsung,exynos:
* Don't request touchscreen interrupt if it is not going to be used,
getting rid of an incorrect resulting warning message.
xilinx,xadc:
* Avoid changing preset voltage and themperature thresholds as they
are typicaly set as part of FPGA image building so should be left
alone.
* Fix wrong temperature offset and scale for some devices.
* tag 'iio-fixes-for-6.6b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: afe: rescale: Accept only offset channels
iio: exynos-adc: request second interupt only when touchscreen mode is used
iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScale
iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholds
dt-bindings: iio: add missing reset-gpios constrain
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Capture correct oemid-bits for eMMC cards
- Fix error propagation for some ioctl commands
- Hold retuning if SDIO is in 1-bit mode
MMC host:
- mtk-sd: Use readl_poll_timeout_atomic to not "schedule while atomic"
- sdhci-msm: Correct minimum number of clocks
- sdhci-pci-gli: Fix LPM negotiation so x86/S0ix SoCs can suspend
- sdhci-sprd: Fix error code in sdhci_sprd_tuning()"
* tag 'mmc-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: Capture correct oemid-bits for eMMC cards
mmc: mtk-sd: Use readl_poll_timeout_atomic in msdc_reset_hw
mmc: core: Fix error propagation for some ioctl commands
mmc: sdhci-sprd: Fix error code in sdhci_sprd_tuning()
mmc: sdhci-pci-gli: fix LPM negotiation so x86/S0ix SoCs can suspend
mmc: core: sdio: hold retuning if sdio in 1-bit mode
dt-bindings: mmc: sdhci-msm: correct minimum number of clocks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Still higher volume than wished, but all are driver-specific small
fixes and look safe for this late RC.
The majority of changes are for ASoC, especially for wcd938x driver
and Cirrus codec drivers, while there are other random fixes including
usual HD-audio quirks"
* tag 'sound-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (22 commits)
ASoC: da7219: Correct the process of setting up Gnd switch in AAD
ALSA: hda/realtek - Fixed ASUS platform headset Mic issue
ALSA: hda/realtek: Add quirk for ASUS ROG GU603ZV
ALSA: hda/relatek: Enable Mute LED on HP Laptop 15s-fq5xxx
ASoC: dwc: Fix non-DT instantiation
ASoC: codecs: tas2780: Fix log of failed reset via I2C.
ASoC: rt5650: fix the wrong result of key button
ASoC: cs42l42: Fix missing include of gpio/consumer.h
ASoC: cs42l43: Update values for bias sense
ASoC: dt-bindings: cirrus,cs42l43: Update values for bias sense
ASoC: cs35l56: ASP1 DOUT must default to Hi-Z when not transmitting
ASoC: pxa: fix a memory leak in probe()
ASoC: cs35l56: Fix illegal use of init_completion()
ASoC: codecs: wcd938x-sdw: fix runtime PM imbalance on probe errors
ASoC: codecs: wcd938x-sdw: fix use after free on driver unbind
ASoC: codecs: wcd938x: fix runtime PM imbalance on remove
ASoC: codecs: wcd938x: fix regulator leaks on probe errors
ASoC: codecs: wcd938x: fix resource leaks on bind errors
ASoC: codecs: wcd938x: fix unbind tear down order
ASoC: codecs: wcd938x: drop bogus bind error handling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, netfilter, WiFi.
Feels like an up-tick in regression fixes, mostly for older releases.
The hfsc fix, tcp_disconnect() and Intel WWAN fixes stand out as
fairly clear-cut user reported regressions. The mlx5 DMA bug was
causing strife for 390x folks. The fixes themselves are not
particularly scary, tho. No open investigations / outstanding reports
at the time of writing.
Current release - regressions:
- eth: mlx5: perform DMA operations in the right locations, make
devices usable on s390x, again
- sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner
curve, previous fix of rejecting invalid config broke some scripts
- rfkill: reduce data->mtx scope in rfkill_fop_open, avoid deadlock
- revert "ethtool: Fix mod state of verbose no_mask bitset", needs
more work
Current release - new code bugs:
- tcp: fix listen() warning with v4-mapped-v6 address
Previous releases - regressions:
- tcp: allow tcp_disconnect() again when threads are waiting, it was
denied to plug a constant source of bugs but turns out .NET depends
on it
- eth: mlx5: fix double-free if buffer refill fails under OOM
- revert "net: wwan: iosm: enable runtime pm support for 7560", it's
causing regressions and the WWAN team at Intel disappeared
- tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a
single skb, fix single-stream perf regression on some devices
Previous releases - always broken:
- Bluetooth:
- fix issues in legacy BR/EDR PIN code pairing
- correctly bounds check and pad HCI_MON_NEW_INDEX name
- netfilter:
- more fixes / follow ups for the large "commit protocol" rework,
which went in as a fix to 6.5
- fix null-derefs on netlink attrs which user may not pass in
- tcp: fix excessive TLP and RACK timeouts from HZ rounding (bless
Debian for keeping HZ=250 alive)
- net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation, prevent
letting frankenstein UDP super-frames from getting into the stack
- net: fix interface altnames when ifc moves to a new namespace
- eth: qed: fix the size of the RX buffers
- mptcp: avoid sending RST when closing the initial subflow"
* tag 'net-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
Revert "ethtool: Fix mod state of verbose no_mask bitset"
selftests: mptcp: join: no RST when rm subflow/addr
mptcp: avoid sending RST when closing the initial subflow
mptcp: more conservative check for zero probes
tcp: check mptcp-level constraints for backlog coalescing
selftests: mptcp: join: correctly check for no RST
net: ti: icssg-prueth: Fix r30 CMDs bitmasks
selftests: net: add very basic test for netdev names and namespaces
net: move altnames together with the netdevice
net: avoid UAF on deleted altname
net: check for altname conflicts when changing netdev's netns
net: fix ifname in netlink ntf during netns move
net: ethernet: ti: Fix mixed module-builtin object
net: phy: bcm7xxx: Add missing 16nm EPHY statistics
ipv4: fib: annotate races around nh->nh_saddr_genid and nh->nh_saddr
tcp_bpf: properly release resources on error paths
net/sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner curve
net: mdio-mux: fix C45 access returning -EIO after API change
tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a single skb
octeon_ep: update BQL sent bytes before ringing doorbell
...
|
|
The Rust code documentation output path moved from `rust/doc` to
`Documentation/output/rust/rustdoc`, thus update the old reference.
Fixes: 48fadf440075 ("docs: Move rustdoc output, cross-reference it")
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Link: https://lore.kernel.org/r/20231018160145.1017340-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.6
A fairly large set of fixes here but all driver specific, the biggest
block is Johan's work shaking out issues with device setup and teardown
for the wcd938x driver which is a relatively large but clearly broken
down set of changes.
There is one core helper function added as part of a fix for wsa-macro.
|
|
Add a new ret_ip callback parameter description.
Link: https://lore.kernel.org/all/169556257133.146934.13560704846459957726.stgit@devnote2/
Fixes: cb16330d1274 ("fprobe: Pass return address to the handlers")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Florent Revest <revest@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here is a small set of char/misc and other smaller driver subsystem
fixes for 6.6-rc6. Included in here are:
- lots of iio driver fixes
- binder memory leak fix
- mcb driver fixes
- counter driver fixes
- firmware loader documentation fix
- documentation update for embargoed hardware issues
All of these have been in linux-next for over a week with no reported
issues"
* tag 'char-misc-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (22 commits)
iio: pressure: ms5611: ms5611_prom_is_valid false negative bug
dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes
iio: adc: ad7192: Correct reference voltage
iio: light: vcnl4000: Don't power on/off chip in config
iio: addac: Kconfig: update ad74413r selections
iio: pressure: dps310: Adjust Timeout Settings
iio: imu: bno055: Fix missing Kconfig dependencies
iio: adc: imx8qxp: Fix address for command buffer registers
iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()
iio: irsd200: fix -Warray-bounds bug in irsd200_trigger_handler
dt-bindings: iio: rohm,bu27010: add missing vdd-supply to example
binder: fix memory leaks of spam and pending work
firmware_loader: Update contact emails for ABI docs
Documentation: embargoed-hardware-issues.rst: Clarify prenotifaction
mcb: remove is_added flag from mcb_device struct
coresight: tmc-etr: Disable warnings for allocation failures
coresight: Fix run time warnings while reusing ETR buffer
iio: admv1013: add mixer_vgate corner cases
iio: pressure: bmp280: Fix NULL pointer exception
iio: dac: ad3552r: Correct device IDs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs fixes from Amir Goldstein:
- Various fixes for regressions due to conversion to new mount
api in v6.5
- Disable a new mount option syntax (append lowerdir) that was
added in v6.5 because we plan to add a different lowerdir
append syntax in v6.7
* tag 'ovl-fixes-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: temporarily disable appending lowedirs
ovl: fix regression in showing lowerdir mount option
ovl: fix regression in parsing of mount options with escaped comma
fs: factor out vfs_parse_monolithic_sep() helper
|
|
Before commit b36a5780cb44 ("ovl: modify layer parameter parsing"),
spaces and commas in lowerdir mount option value used to be escaped using
seq_show_option().
In current upstream, when lowerdir value has a space, it is not escaped
in /proc/mounts, e.g.:
none /mnt overlay rw,relatime,lowerdir=l l,upperdir=u,workdir=w 0 0
which results in broken output of the mount utility:
none on /mnt type overlay (rw,relatime,lowerdir=l)
Store the original lowerdir mount options before unescaping and show
them using the same escaping used for seq_show_option() in addition to
escaping the colon separator character.
Fixes: b36a5780cb44 ("ovl: modify layer parameter parsing")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
Update the "How are representors identified?" documentation
subchapter. For newer kernels driver should use
SET_NETDEV_DEVLINK_PORT instead of ndo_get_devlink_port()
callback.
Fixes: 7712b3e966ea ("Merge branch 'net-fix-netdev-to-devlink_port-linkage-and-expose-to-user'")
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20231012123144.15768-1-mateusz.polchlopek@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure that the command values used for replies are correct. This is
only affecting generated userspace helpers, no change on kernel code.
Fixes: 7199c86247e9 ("netlink: specs: devlink: add commands that do per-instance dump")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231012115811.298129-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"Driver fixes for:
- stm32 dma residue calculation and chaining
- stm32 mdma for setting inflight bytes, residue calculation and
resume abort
- channel request, channel enable and dma error in fsl_edma
- runtime pm imbalance in ste_dma40 driver
- deadlock fix in mediatek driver"
* tag 'dmaengine-fix-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: fsl-edma: fix all channels requested when call fsl_edma3_xlate()
dmaengine: stm32-dma: fix residue in case of MDMA chaining
dmaengine: stm32-dma: fix stm32_dma_prep_slave_sg in case of MDMA chaining
dmaengine: stm32-mdma: set in_flight_bytes in case CRQA flag is set
dmaengine: stm32-mdma: use Link Address Register to compute residue
dmaengine: stm32-mdma: abort resume if no ongoing transfer
dmaengine: ste_dma40: Fix PM disable depth imbalance in d40_probe
dmaengine: mediatek: Fix deadlock caused by synchronize_irq()
dmaengine: idxd: use spin_lock_irqsave before wait_event_lock_irq
dmaengine: fsl-edma: fix edma4 channel enable failure on second attempt
dt-bindings: dmaengine: zynqmp_dma: add xlnx,bus-width required property
dmaengine: fsl-dma: fix DMA error when enabling sg if 'DONE' bit is set
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
- Fix access-after-free in pwq allocation error path
- Implicitly ordered unbound workqueues should lose the implicit
ordering if an attribute change which isn't compatible with ordered
operation is requested. However, attribute changes requested through
the sysfs interface weren't doing that leaving no way to override the
implicit ordering through the sysfs interface. Fix it.
- Other doc and misc updates
* tag 'wq-for-6.6-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix -Wformat-truncation in create_worker
workqueue: Override implicit ordered attribute in workqueue_apply_unbound_cpumask()
workqueue: Use the kmem_cache_free() instead of kfree() to release pwq
workqueue: doc: Fix function and sysfs path errors
workqueue: Fix UAF report by KASAN in pwq_release_workfn()
|
|
alloc_ordered_queue -> alloc_ordered_workqueue
/sys/devices/virtual/WQ_NAME/
-> /sys/devices/virtual/workqueue/WQ_NAME/
Signed-off-by: WangJinchao <wangjinchao@xfusion.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Add an entry for the Zicond extension to the riscv,isa-extensions property.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Add an entry for the Smstateen extension to the riscv,isa-extensions
property.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of updates for interrupt chip drivers:
- Fix the fail of the Qualcomm PDC driver on v3.2 hardware which is
caused by a control bit being moved to a different location
- Update the SM8150 device tree PDC resource so the version register
can be read
- Make the Renesas RZG2L driver correct for interrupts which are
outside of the LSB in the TSSR register by using the proper macro
for calculating the mask
- Document the Renesas RZ2GL device tree binding correctly and update
them for a few devices which faul to boot otherwise
- Use the proper accessor in the RZ2GL driver instead of blindly
dereferencing an unchecked pointer
- Make GICv3 handle the dma-non-coherent attribute correctly
- Ensure that all interrupt controller nodes on RISCV are marked as
initialized correctly
Maintainer changes:
- Add a new entry for GIC interrupt controllers and assign Marc
Zyngier as the maintainer
- Remove Marc Zyngier from the core and driver maintainer entries as
he is burried in work and short of time to handle that.
Thanks to Marc for all the great work he has done in the past couple
of years!
Also note that commit 5873d380f4c0 ("irqchip/qcom-pdc: Add support for
v3.2 HW") has a incorrect SOB chain.
The real author is Neil. His patch was posted by Dmitry once and Neil
picked it up from the list and reposted it with the bogus SOB chain.
Not a big deal, but worth to mention. I wanted to fix that up, but
then got distracted and Marc piled more changes on top. So I decided
to leave it as is instead of rebasing world"
* tag 'irq-urgent-2023-10-10-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Remove myself from the general IRQ subsystem maintenance
MAINTAINERS: Add myself as the ARM GIC maintainer
irqchip/renesas-rzg2l: Convert to irq_data_get_irq_chip_data()
irqchip/stm32-exti: add missing DT IRQ flag translation
irqchip/riscv-intc: Mark all INTC nodes as initialized
irqchip/gic-v3: Enable non-coherent redistributors/ITSes DT probing
irqchip/gic-v3-its: Split allocation from initialisation of its_node
dt-bindings: interrupt-controller: arm,gic-v3: Add dma-noncoherent property
dt-bindings: interrupt-controller: renesas,irqc: Add r8a779f0 support
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G2UL SoC
irqchip: renesas-rzg2l: Fix logic to clear TINT interrupt source
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Update description for '#interrupt-cells' property
arm64: dts: qcom: sm8150: extend the size of the PDC resource
irqchip/qcom-pdc: Add support for v3.2 HW
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of pending fixes since a couple of weeks ago, which
became slightly bigger than usual due to my vacation.
Most of changes are about ASoC device-specific fixes while USB- and
HD-audio received quirks as usual. All fixes, including two ASoC core
changes, are reasonably small and safe to apply"
* tag 'sound-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: usb-audio: Fix microphone sound on Nexigo webcam.
ALSA: hda/realtek: Change model for Intel RVP board
ALSA: usb-audio: Fix microphone sound on Opencomm2 Headset
ALSA: hda: cs35l41: Cleanup and fix double free in firmware request
ASoC: dt-bindings: fsl,micfil: Document #sound-dai-cells
ASoC: amd: yc: Fix non-functional mic on Lenovo 82YM
ASoC: tlv320adc3xxx: BUG: Correct micbias setting
ASoC: rt5682: Fix regulator enable/disable sequence
ASoC: hdmi-codec: Fix broken channel map reporting
ASoC: core: Do not call link_exit() on uninitialized rtd objects
ASoC: core: Print component name when printing log
ASoC: SOF: amd: fix for firmware reload failure after playback
ASoC: fsl-asoc-card: use integer type for fll_id and pll_id
ASoC: fsl_sai: Don't disable bitclock for i.MX8MP
dt-bindings: ASoC: rockchip: Add compatible for RK3128 spdif
ASoC: soc-generic-dmaengine-pcm: Fix function name in comment
ALSA: hda/realtek - ALC287 merge RTK codec with CS CS35L41 AMP
ASoC: simple-card: fixup asoc_simple_probe() error handling
ASoC: simple-card-utils: fixup simple_util_startup() error handling
ASoC: Intel: sof_sdw: add support for SKU 0B14
...
|
|
The Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml
schema does not enforce number of reset GPIOs, thus each device binding
must do it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231005083650.92222-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Due to an error in the datasheet the bias sense values currently don't
match the hardware. Whilst this is a change to the binding no devices
have yet shipped so updating the binding will not cause any issues.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231010102425.3662364-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix potential memory leak in of_changeset_action()
- Fix some i.MX binding warnings
- Fix typo in renesas,vin binding field-even-active property
- Fix andestech,ax45mp-cache example unit-address
- Add missing additionalProperties on RiscV CPU interrupt-controller
node
- Add missing unevaluatedProperties on media bindings
- Fix brcm,iproc-pcie binding 'msi' child node schema
- Fix MEMSIC MXC4005 compatible string
* tag 'devicetree-fixes-for-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: trivial-devices: Fix MEMSIC MXC4005 compatible string
dt-bindings: PCI: brcm,iproc-pcie: Fix 'msi' child node schema
dt-bindings: PCI: brcm,iproc-pcie: Drop common pci-bus properties
dt-bindings: PCI: brcm,iproc-pcie: Fix example indentation
media: dt-bindings: Add missing unevaluatedProperties on child node schemas
dt-bindings: bus: fsl,imx8qxp-pixel-link-msi-bus: Drop child 'reg' property
media: dt-bindings: imx7-csi: Make power-domains not required for imx8mq
dt-bindings: media: renesas,vin: Fix field-even-active spelling
dt-bindings: cache: andestech,ax45mp-cache: Fix unit address in example
of: overlay: Reorder struct fragment fields kerneldoc
dt-bindings: display: fsl,imx6-hdmi: Change to 'unevaluatedProperties: false'
dt-bindings: riscv: cpus: Add missing additionalProperties on interrupt-controller node
of: dynamic: Fix potential memory leak in of_changeset_action()
|
|
The GIC v3 specifications allow redistributors and ITSes interconnect
ports used to access memory to be wired up in a way that makes the
respective initiators/memory observers non-coherent.
Add the standard dma-noncoherent property to the GICv3 bindings to
allow firmware to describe the redistributors/ITSes components and
interconnect ports behaviour in system designs where the redistributors
and ITSes are not coherent with the CPU.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231006125929.48591-2-lpieralisi@kernel.org
|
|
Document support for the Interrupt Controller for External Devices
(INT-EX) in the Renesas R-Car S4-8 (R8A779F0) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/9467a1c67d5d240211f88336973fa968d39cc860.1690446928.git.geert+renesas@glider.be
|
|
Document RZ/G2UL (R9A07G043U) IRQC bindings. The IRQC block on RZ/G2UL SoC
is almost identical to one found on the RZ/G2L SoC the only difference
being it can support BUS_ERR_INT for which it has additional registers.
Hence new generic compatible string "renesas,r9a07g043u-irqc" is added
for RZ/G2UL SoC.
Now that we have additional interrupt for RZ/G2UL and RZ/Five SoC
interrupt-names property is added so that we can parse them based on
names.
While at it updated the example node to four spaces and added
interrupt-names property.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231006121058.13890-1-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
The correct name of this chip is MXC4005, not MX4005. This is confirmed
both by the manufacturer website and by the title of the original commit,
which added other MXCxxxx devices as well but only this one misses a "c" in
the compatible string.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Fixes: d9bf5d37fd58 ("dt-bindings:trivial-devices: Add memsic,mxc4005/mxc6255/mxc6655 entries")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231004-mxc4005-device-tree-support-v1-1-e7c0faea72e4@bootlin.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The 'msi' child node schema is missing constraints on additional properties.
It turns out it is incomplete and properties for it are documented in the
parent node by mistake. Move the reference to msi-controller.yaml and
the custom properties to the 'msi' node. Adding 'unevaluatedProperties'
ensures all the properties in the 'msi' node are documented.
With the schema corrected, a minimal interrupt controller node is needed
to properly decode the interrupt properties since the example has
multiple interrupt parents.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Fixes: 905b986d099c ("dt-bindings: pci: Convert iProc PCIe to YAML")
Link: https://lore.kernel.org/r/20230926155613.33904-3-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Drop the unnecessary listing of properties already defined in
pci-bus.yaml. Unless there are additional constraints, it is not
necessary.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230926155351.31117-2-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The example's indentation is off. While fixing this, the 'bus' node
is unnecessary and can be dropped. It is also preferred to split up
unrelated examples to their own entries.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230926155351.31117-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Just as unevaluatedProperties or additionalProperties are required at
the top level of schemas, they should (and will) also be required for
child node schemas. That ensures only documented properties are
present for any node.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230925212803.1976803-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
A bus schema based on simple-pm-bus shouldn't define how many 'reg' entries
a child device has. That is a property of the device. Drop the 'reg' entry.
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230925212639.1975002-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
On i.MX8MQ the MIPI CSI block does have an associated power-domain, but
the CSI bridge does not.
Remove the power-domains requirement from the i.MX8MQ CSI bridge
to fix the following schema warning:
imx8mq-librem5-r4.dtb: csi@30a90000: 'power-domains' is a required property
from schema $id: http://devicetree.org/schemas/media/nxp,imx7-csi.yaml#
Fixes: de655386845a ("media: dt-bindings: media: imx7-csi: Document i.MX8M power-domains property")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20231004201105.2323758-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
1st set of IIO fixes for 6.6
Note last minute rebase to fix up a stale Fixes tag. All patches have been
in Linux-next for some time.
adi,ad3552r
- Fix swapped device IDs for the two parts that are supported.
adi,ad7192
- Use the right reference voltage source.
adi,ad7292
- Fix additionalProperties to be false, not true.
adi,ad74413
- Add missing Kconfig depends on IIO_BUFFER and IIO_TRIGGERED_BUFFER
adi,admv1013
- Fix up some corner cases for the mixer vgate register value.
bosch,bmp280
- Fix a null pointer dereference caused by a wrong boolean operator.
bosch,bno055
- Add missing Kconfig depends on IIO_BUFFER and IIO_TRIGGERED_BUFFER
freescale,imx8eqxp
- Fix some wrong register addresses.
google,cros_ec
- Fix a use after free if very badly timed buffer disable occurs by
holding the device in buffered mode.
infineon,dps310
- Expand a timeout so we don't hit it on working parts.
meas,m5611
- Allow for a ROM CRC of 0 as it is a valid value and there are devices
out there where it happens.
murata,irsd200
- Make sure the buffer used to build up the scan is large enough to take
the timestamp.
rohm,bu27010 binding
- Add a missing required vdd-supply
vishay,vcnl4000
- Don't power down chip in wrong place.
* tag 'iio-fixes-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: pressure: ms5611: ms5611_prom_is_valid false negative bug
dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes
iio: adc: ad7192: Correct reference voltage
iio: light: vcnl4000: Don't power on/off chip in config
iio: addac: Kconfig: update ad74413r selections
iio: pressure: dps310: Adjust Timeout Settings
iio: imu: bno055: Fix missing Kconfig dependencies
iio: adc: imx8qxp: Fix address for command buffer registers
iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()
iio: irsd200: fix -Warray-bounds bug in irsd200_trigger_handler
dt-bindings: iio: rohm,bu27010: add missing vdd-supply to example
iio: admv1013: add mixer_vgate corner cases
iio: pressure: bmp280: Fix NULL pointer exception
iio: dac: ad3552r: Correct device IDs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"A typo fix for a PMU driver, a workround for a side-channel erratum on
Cortex-A520 and a fix for the local timer save/restore when using ACPI
with Qualcomm's custom CPUs:
- Workaround for Cortex-A520 erratum #2966298
- Fix typo in Arm CMN PMU driver that breaks counter overflow handling
- Fix timer handling across idle for Qualcomm custom CPUs"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
cpuidle, ACPI: Evaluate LPI arch_flags for broadcast timer
arm64: errata: Add Cortex-A520 speculative unprivileged load workaround
arm64: Add Cortex-A520 CPU part definition
perf/arm-cmn: Fix the unhandled overflow status of counter 4 to 7
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: More fixes for v6.6
Some additional fixes for v6.6, some fairly unremarkable driver specific
ones and a couple of minor core fixes for error handling and improved
logging.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Fix a memory leak issue when using LZMA global compressed
deduplication
- Fix empty device tags in flatdev mode
- Update documentation for recent new features
* tag 'erofs-for-6.6-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: update documentation
erofs: allow empty device tags in flatdev mode
erofs: fix memory leak of LZMA global compressed deduplication
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD fixes from Lee Jones:
"A couple of small fixes:
- Potential build failure in CS42L43
- Device Tree bindings clean-up for a superseded patch"
* tag 'mfd-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
dt-bindings: mfd: Revert "dt-bindings: mfd: maxim,max77693: Add USB connector"
mfd: cs42l43: Fix MFD_CS42L43 dependency on REGMAP_IRQ
|
