summaryrefslogtreecommitdiff
path: root/Documentation
AgeCommit message (Collapse)Author
2017-07-06ksm: introduce ksm_max_page_sharing per page deduplication limitAndrea Arcangeli
Without a max deduplication limit for each KSM page, the list of the rmap_items associated to each stable_node can grow infinitely large. During the rmap walk each entry can take up to ~10usec to process because of IPIs for the TLB flushing (both for the primary MMU and the secondary MMUs with the MMU notifier). With only 16GB of address space shared in the same KSM page, that would amount to dozens of seconds of kernel runtime. A ~256 max deduplication factor will reduce the latencies of the rmap walks on KSM pages to order of a few msec. Just doing the cond_resched() during the rmap walks is not enough, the list size must have a limit too, otherwise the caller could get blocked in (schedule friendly) kernel computations for seconds, unexpectedly. There's room for optimization to significantly reduce the IPI delivery cost during the page_referenced(), but at least for page_migration in the KSM case (used by hard NUMA bindings, compaction and NUMA balancing) it may be inevitable to send lots of IPIs if each rmap_item->mm is active on a different CPU and there are lots of CPUs. Even if we ignore the IPI delivery cost, we've still to walk the whole KSM rmap list, so we can't allow millions or billions (ulimited) number of entries in the KSM stable_node rmap_item lists. The limit is enforced efficiently by adding a second dimension to the stable rbtree. So there are three types of stable_nodes: the regular ones (identical as before, living in the first flat dimension of the stable rbtree), the "chains" and the "dups". Every "chain" and all "dups" linked into a "chain" enforce the invariant that they represent the same write protected memory content, even if each "dup" will be pointed by a different KSM page copy of that content. This way the stable rbtree lookup computational complexity is unaffected if compared to an unlimited max_sharing_limit. It is still enforced that there cannot be KSM page content duplicates in the stable rbtree itself. Adding the second dimension to the stable rbtree only after the max_page_sharing limit hits, provides for a zero memory footprint increase on 64bit archs. The memory overhead of the per-KSM page stable_tree and per virtual mapping rmap_item is unchanged. Only after the max_page_sharing limit hits, we need to allocate a stable_tree "chain" and rb_replace() the "regular" stable_node with the newly allocated stable_node "chain". After that we simply add the "regular" stable_node to the chain as a stable_node "dup" by linking hlist_dup in the stable_node_chain->hlist. This way the "regular" (flat) stable_node is converted to a stable_node "dup" living in the second dimension of the stable rbtree. During stable rbtree lookups the stable_node "chain" is identified as stable_node->rmap_hlist_len == STABLE_NODE_CHAIN (aka is_stable_node_chain()). When dropping stable_nodes, the stable_node "dup" is identified as stable_node->head == STABLE_NODE_DUP_HEAD (aka is_stable_node_dup()). The STABLE_NODE_DUP_HEAD must be an unique valid pointer never used elsewhere in any stable_node->head/node to avoid a clashes with the stable_node->node.rb_parent_color pointer, and different from &migrate_nodes. So the second field of &migrate_nodes is picked and verified as always safe with a BUILD_BUG_ON in case the list_head implementation changes in the future. The STABLE_NODE_DUP is picked as a random negative value in stable_node->rmap_hlist_len. rmap_hlist_len cannot become negative when it's a "regular" stable_node or a stable_node "dup". The stable_node_chain->nid is irrelevant. The stable_node_chain->kpfn is aliased in a union with a time field used to rate limit the stable_node_chain->hlist prunes. The garbage collection of the stable_node_chain happens lazily during stable rbtree lookups (as for all other kind of stable_nodes), or while disabling KSM with "echo 2 >/sys/kernel/mm/ksm/run" while collecting the entire stable rbtree. While the "regular" stable_nodes and the stable_node "dups" must wait for their underlying tree_page to be freed before they can be freed themselves, the stable_node "chains" can be freed immediately if the stable_node->hlist turns empty. This is because the "chains" are never pointed by any page->mapping and they're effectively stable rbtree KSM self contained metadata. [akpm@linux-foundation.org: fix non-NUMA build] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Tested-by: Petr Holasek <pholasek@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Evgheni Dereveanchin <ederevea@redhat.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Gavin Guo <gavin.guo@canonical.com> Cc: Jay Vosburgh <jay.vosburgh@canonical.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06mm: allow slab_nomerge to be set at build timeKees Cook
Some hardened environments want to build kernels with slab_nomerge already set (so that they do not depend on remembering to set the kernel command line option). This is desired to reduce the risk of kernel heap overflows being able to overwrite objects from merged caches and changes the requirements for cache layout control, increasing the difficulty of these attacks. By keeping caches unmerged, these kinds of exploits can usually only damage objects in the same cache (though the risk to metadata exploitation is unchanged). Link: http://lkml.kernel.org/r/20170620230911.GA25238@beast Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Daniel Micay <danielmicay@gmail.com> Cc: David Windsor <dave@nullcore.net> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Daniel Micay <danielmicay@gmail.com> Cc: David Windsor <dave@nullcore.net> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Tejun Heo <tj@kernel.org> Cc: Daniel Mack <daniel@zonque.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Helge Deller <deller@gmx.de> Cc: Rik van Riel <riel@redhat.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06Merge branch 'for-4.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup changes from Tejun Heo: - Waiman made the debug controller work and a lot more useful on cgroup2 - There were a couple issues with cgroup subtree delegation. The documentation on delegating to a non-root user was missing some part and cgroup namespace support wasn't factoring in delegation at all. The documentation is updated and the now there is a mount option to make cgroup namespace fit for delegation * 'for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: implement "nsdelegate" mount option cgroup: restructure cgroup_procs_write_permission() cgroup: "cgroup.subtree_control" should be writeable by delegatee cgroup: fix lockdep warning in debug controller cgroup: refactor cgroup_masks_read() in the debug controller cgroup: make debug an implicit controller on cgroup2 cgroup: Make debug cgroup support v2 and thread mode cgroup: Make Kconfig prompt of debug cgroup more accurate cgroup: Move debug cgroup to its own file cgroup: Keep accurate count of tasks in each css_set
2017-07-06Merge branch 'for-4.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: - Christoph added support for TCG OPAL self encrypting disks - Minwoo added support for ATA PASS-THROUGH(32) - Linus Walleij removed spurious drvdata assignments in some drivers - Support for a few new device and other fixes * 'for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (33 commits) sd: add support for TCG OPAL self encrypting disks libata: fix build warning from unused goto label libata: Support for an ATA PASS-THROUGH(32) command. ahci: Add Device ID for ASMedia 1061R and 1062R sata_via: Enable optional hotplug on VT6420 ata: ahci_brcm: Avoid writing to read-only registers libata: Add the AHCI_HFLAG_NO_WRITE_TO_RO flag libata: Add the AHCI_HFLAG_YES_ALPM flag ata: ftide010: fix resource printing libata: make the function name in comment match the actual function ata: sata_rcar: make of_device_ids const. ata: pata_octeon_cf: make of_device_ids const. libata: Convert bare printks to pr_cont libahci: wrong comments in ahci_do_softreset() ata: declare ata_port_info structures as const ata: Add driver for Faraday Technology FTIDE010 ata: Add DT bindings for the Gemini SATA bridge ata: Add DT bindings for Faraday Technology FTIDE010 libata: implement SECURITY PROTOCOL IN/OUT libata: factor out a ata_identify_page_supported helper ...
2017-07-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Reasonably busy this cycle, but perhaps not as busy as in the 4.12 merge window: 1) Several optimizations for UDP processing under high load from Paolo Abeni. 2) Support pacing internally in TCP when using the sch_fq packet scheduler for this is not practical. From Eric Dumazet. 3) Support mutliple filter chains per qdisc, from Jiri Pirko. 4) Move to 1ms TCP timestamp clock, from Eric Dumazet. 5) Add batch dequeueing to vhost_net, from Jason Wang. 6) Flesh out more completely SCTP checksum offload support, from Davide Caratti. 7) More plumbing of extended netlink ACKs, from David Ahern, Pablo Neira Ayuso, and Matthias Schiffer. 8) Add devlink support to nfp driver, from Simon Horman. 9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa Prabhu. 10) Add stack depth tracking to BPF verifier and use this information in the various eBPF JITs. From Alexei Starovoitov. 11) Support XDP on qed device VFs, from Yuval Mintz. 12) Introduce BPF PROG ID for better introspection of installed BPF programs. From Martin KaFai Lau. 13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann. 14) For loads, allow narrower accesses in bpf verifier checking, from Yonghong Song. 15) Support MIPS in the BPF selftests and samples infrastructure, the MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David Daney. 16) Support kernel based TLS, from Dave Watson and others. 17) Remove completely DST garbage collection, from Wei Wang. 18) Allow installing TCP MD5 rules using prefixes, from Ivan Delalande. 19) Add XDP support to Intel i40e driver, from Björn Töpel 20) Add support for TC flower offload in nfp driver, from Simon Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub Kicinski, and Bert van Leeuwen. 21) IPSEC offloading support in mlx5, from Ilan Tayari. 22) Add HW PTP support to macb driver, from Rafal Ozieblo. 23) Networking refcount_t conversions, From Elena Reshetova. 24) Add sock_ops support to BPF, from Lawrence Brako. This is useful for tuning the TCP sockopt settings of a group of applications, currently via CGROUPs" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits) net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap cxgb4: Support for get_ts_info ethtool method cxgb4: Add PTP Hardware Clock (PHC) support cxgb4: time stamping interface for PTP nfp: default to chained metadata prepend format nfp: remove legacy MAC address lookup nfp: improve order of interfaces in breakout mode net: macb: remove extraneous return when MACB_EXT_DESC is defined bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case bpf: fix return in load_bpf_file mpls: fix rtm policy in mpls_getroute net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t net, ax25: convert ax25_route.refcount from atomic_t to refcount_t net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t ...
2017-07-05Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "Algorithms: - add private key generation to ecdh Drivers: - add generic gcm(aes) to aesni-intel - add SafeXcel EIP197 crypto engine driver - add ecb(aes), cfb(aes) and ecb(des3_ede) to cavium - add support for CNN55XX adapters in cavium - add ctr mode to chcr - add support for gcm(aes) to omap" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (140 commits) crypto: testmgr - Reenable sha1/aes in FIPS mode crypto: ccp - Release locks before returning crypto: cavium/nitrox - dma_mapping_error() returns bool crypto: doc - fix typo in docs Documentation/bindings: Document the SafeXel cryptographic engine driver crypto: caam - fix gfp allocation flags (part II) crypto: caam - fix gfp allocation flags (part I) crypto: drbg - Fixes panic in wait_for_completion call crypto: caam - make of_device_ids const. crypto: vmx - remove unnecessary check crypto: n2 - make of_device_ids const crypto: inside-secure - use the base_end pointer in ring rollback crypto: inside-secure - increase the batch size crypto: inside-secure - only dequeue when needed crypto: inside-secure - get the backlog before dequeueing the request crypto: inside-secure - stop requeueing failed requests crypto: inside-secure - use one queue per hw ring crypto: inside-secure - update the context and request later crypto: inside-secure - align the cipher and hash send functions crypto: inside-secure - optimize DSE bufferability control ...
2017-07-05Merge tag 'gcc-plugins-v4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull GCC plugin updates from Kees Cook: "The big part is the randstruct plugin infrastructure. This is the first of two expected pull requests for randstruct since there are dependencies in other trees that would be easier to merge once those have landed. Notably, the IPC allocation refactoring in -mm, and many trivial merge conflicts across several trees when applying the __randomize_layout annotation. As a result, it seemed like I should send this now since it is relatively self-contained, and once the rest of the trees have landed, send the annotation patches. I'm expecting the final phase of randstruct (automatic struct selection) will land for v4.14, but if its other tree dependencies actually make it for v4.13, I can send that merge request too. Summary: - typo fix in Kconfig (Jean Delvare) - randstruct infrastructure" * tag 'gcc-plugins-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: ARM: Prepare for randomized task_struct randstruct: Whitelist NIU struct page overloading randstruct: Whitelist big_key path struct overloading randstruct: Whitelist UNIXCB cast randstruct: Whitelist struct security_hook_heads cast gcc-plugins: Add the randstruct plugin Fix English in description of GCC_PLUGIN_STRUCTLEAK compiler: Add __designated_init annotation gcc-plugins: Detail c-common.h location for GCC 4.6
2017-07-05Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security layer updates from James Morris: - a major update for AppArmor. From JJ: * several bug fixes and cleanups * the patch to add symlink support to securityfs that was floated on the list earlier and the apparmorfs changes that make use of securityfs symlinks * it introduces the domain labeling base code that Ubuntu has been carrying for several years, with several cleanups applied. And it converts the current mediation over to using the domain labeling base, which brings domain stacking support with it. This finally will bring the base upstream code in line with Ubuntu and provide a base to upstream the new feature work that Ubuntu carries. * This does _not_ contain any of the newer apparmor mediation features/controls (mount, signals, network, keys, ...) that Ubuntu is currently carrying, all of which will be RFC'd on top of this. - Notable also is the Infiniband work in SELinux, and the new file:map permission. From Paul: "While we're down to 21 patches for v4.13 (it was 31 for v4.12), the diffstat jumps up tremendously with over 2k of line changes. Almost all of these changes are the SELinux/IB work done by Daniel Jurgens; some other noteworthy changes include a NFS v4.2 labeling fix, a new file:map permission, and reporting of policy capabilities on policy load" There's also now genfscon labeling support for tracefs, which was lost in v4.1 with the separation from debugfs. - Smack incorporates a safer socket check in file_receive, and adds a cap_capable call in privilege check. - TPM as usual has a bunch of fixes and enhancements. - Multiple calls to security_add_hooks() can now be made for the same LSM, to allow LSMs to have hook declarations across multiple files. - IMA now supports different "ima_appraise=" modes (eg. log, fix) from the boot command line. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (126 commits) apparmor: put back designators in struct initialisers seccomp: Switch from atomic_t to recount_t seccomp: Adjust selftests to avoid double-join seccomp: Clean up core dump logic IMA: update IMA policy documentation to include pcr= option ima: Log the same audit cause whenever a file has no signature ima: Simplify policy_func_show. integrity: Small code improvements ima: fix get_binary_runtime_size() ima: use ima_parse_buf() to parse template data ima: use ima_parse_buf() to parse measurements headers ima: introduce ima_parse_buf() ima: Add cgroups2 to the defaults list ima: use memdup_user_nul ima: fix up #endif comments IMA: Correct Kconfig dependencies for hash selection ima: define is_ima_appraise_enabled() ima: define Kconfig IMA_APPRAISE_BOOTPARAM option ima: define a set of appraisal rules requiring file signatures ima: extend the "ima_policy" boot command line to support multiple policies ...
2017-07-05dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strapMurali Karicheri
The data manual for DP83867IR/CR, SNLS484E[1], revised march 2017, advises that strapping RX_DV/RX_CTRL pin in mode 1 and 2 is not supported (see note below Table 5 (4-Level Strap Pins)). It further advises that if a board has this pin strapped in mode 1 and mode 2, then to ensure proper operation of the PHY, a software workaround must be implemented. Since it is not possible to detect in software if RX_DV/RX_CTRL pin is incorrectly strapped, add a device-tree property for the board to advertise this and allow corrective action in software. [1] http://www.ti.com/lit/ds/snls484e/snls484e.pdf Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> [nsekhar@ti.com: rebase to mainline, split documentation into separate patch] Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-04Merge branch 'merge/randstruct' into for-next/gcc-pluginsKees Cook
2017-07-04Merge tag 'armsoc-dt64' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM 64-bit DT updates from Arnd Bergmann: "Device-tree updates for arm64 platforms. For the first time I can remember, this is actually larger than the corresponding branch for 32-bit platforms overall, though that has more individual changes. A significant portion this time is due to added machine support: - Initial support for the Realtek RTD1295 SoC, along with the Zidoo X9S set-top-box - Initial support for Actions Semi S900 and the Bubblegum-96 single-board-cёmputer. - Rockchips support for the rk3399-Firefly single-board-computer gets added, this one stands out for being relatively fast, affordable and well₋supported, compared to many boards that only fall into one or two of the above categories. - Mediatek gains support for the mt6797 mobile-phone SoC platform and corresponding evaluation board. - Amlogic board support gets added for the NanoPi K2 and S905x LibreTech CC single-board computers and the R-Box Pro set-top-box - Allwinner board support gets added for the OrangePi Win, Orangepi Zero Plus 2, NanoPi NEO2 and Orange Pi Prime single board computers and the SoPine system-on-module. - Renesas board support for Salvator-XS and H3ULCB automotive development systems. - Socionext Uniphier board support for LD11-global and LD20-global, whatever those may be. - Broadcom adds support for the new Stingray communication processor in its iProc family, along with two reference boards. Other updates include: - For the hisicon platform, support for Hi3660-Hikey960 gets extended significantly. - Lots of smaller updates for Renesas, Amlogic, Rockchip, UniPhier, Broadcom, Allwinner, Hisilicon, Qualcomm, Marvell, and NXP" * tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (243 commits) ARM64: dts: marvell: armada37xx: Fix timer interrupt specifiers Revert "arm64: dts: marvell: add dma-mask in crypto nodes for 7k/8k" arm64: dts: mediatek: don't include missing file ARM64: dts: meson-gxl: Add Libre Technology CC support dt-bindings: arm: amlogic: Add Libre Technology CC board dt-bindings: add Libre Technology vendor prefix arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K arm64: dts: zte: Use - instead of @ for DT OPP entries arm64: dts: marvell: add gpio support for Armada 7K/8K arm64: dts: marvell: add pinctrl support for Armada 7K/8K arm64: dts: marvell: use new binding for the system controller on cp110 arm64: dts: marvell: remove *-clock-output-names on cp110 arm64: dts: marvell: use new bindings for xor clocks on ap806 arm64: dts: marvell: mcbin: enable the mdio node arm64: dts: Add Actions Semi S900 and Bubblegum-96 dt-bindings: Add vendor prefix for uCRobotics arm64: dts: marvell: add xmdio nodes for 7k/8k arm64: dts: marvell: add a comment on the cp110 slave node status arm64: dts: marvell: remove cpm crypto nodes from dts files arm64: dts: marvell: cp110: enable the crypto engine at the SoC level ...
2017-07-04Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "New SoC specific drivers: - NVIDIA Tegra PM Domain support for newer SoCs (Tegra186 and later) based on the "BPMP" firmware - Clocksource and system controller drivers for the newly added Action Semi platforms (both arm and arm64). Reset subsystem, merged through arm-soc by tradition: - New drivers for Altera Stratix10, TI Keystone and Cortina Gemini SoCs - Various subsystem-wide cleanups Updates for existing SoC-specific drivers - TI GPMC (General Purpose Memory Controller) - Mediatek "scpsys" system controller support for MT6797 - Broadcom "brcmstb_gisb" bus arbitrer - ARM SCPI firmware - Renesas "SYSC" system controller One more driver update was submitted for the Freescale/NXP DPAA data path acceleration that has previously been used on PowerPC chips. I ended up postponing the merge until some API questions for its unusual MMIO access are resolved" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits) clocksource: owl: Add S900 support clocksource: Add Owl timer soc: renesas: rcar-sysc: Use GENPD_FLAG_ALWAYS_ON firmware: tegra: Fix locking bugs in BPMP soc/tegra: flowctrl: Fix error handling soc/tegra: bpmp: Implement generic PM domains soc/tegra: bpmp: Update ABI header PM / Domains: Allow overriding the ->xlate() callback soc: brcmstb: enable drivers for ARM64 and BMIPS soc: renesas: Rework Kconfig and Makefile logic reset: Add the TI SCI reset driver dt-bindings: reset: Add TI SCI reset binding reset: use kref for reference counting soc: qcom: smsm: Improve error handling, quiesce probe deferral cpufreq: scpi: use new scpi_ops functions to remove duplicate code firmware: arm_scpi: add support to populate OPPs and get transition latency dt-bindings: reset: Add reset manager offsets for Stratix10 memory: omap-gpmc: add error message if bank-width property is absent memory: omap-gpmc: make dts snippet include semicolon reset: Add a Gemini reset controller ...
2017-07-04Merge tag 'armsoc-dt' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM device-tree updates from Arnd Bergmann: "Device-tree continues to see lots of updates. The majority of patches here are smaller changes for new hardware on existing platforms, and there are a few larger changes worth pointing out. New machines: - The new Action Semi S500 platform is added along with initial support for the LeMaker Guitar board. - STM32 gains support for three new boards: stm32h743-disco, stm32f746-disco, and stm32f769-disco, along with new device support for the existing stm32f429 boards. - Renesas adds two new boards, the tiny GR-Peach based on RZ/A1H with 10MB on-chip SRAM, and the iWave G20D-Q7 System-on-Module plus board. - On Marvell "mvebu", we gain support for the Linksys WRT3200ACM wireless router. - For NXP i.MX, we gain support for the Gateworks Ventana GW5600 and the Technexion Pico i.MX7D single-board computers. - The BeagleBone Blue is added for OMAP, it's the latest variation of the popular Beaglebone Black single-board computer. - The Allwinner based Lichee Pi Zero and NanoPi M1 Plus boards are added, these are the latest variations of a seemingly endless supply of similar single-board computers. Other updates: - Linus Walleij improves support for the "Faraday" based SoC platforms from various SoC makers (Moxart, Aspeed, Gemini) - The ARM Mali GPU is now describe on Rockchips SoCs - Mediatek MT7623 is extended significantly, making it much more useful. - Lots of individual updates on Renesas, OMAP, Rockchips, Broadcom, Allwinner, Qualcomm, iMX - For Amlogic, the clock support is extended a lot on meson8b. - We now build the devicetree file for the Raspberry Pi 3 on 32-bit ARM, in addition to the existing ARM64 support, to help users wanting to run a 32-bit system on it" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (345 commits) ARM: dts: socfpga: set the i2c frequency ARM: dts: socfpga: Add second ethernet alias to VINING FPGA ARM: dts: socfpga: Drop LED node from VINING FPGA ARM: dts: socfpga: Remove I2C EEPROMs from VINING FPGA ARM: dts: socfpga: Enable QSPI support on VINING FPGA ARM: dts: socfpga: Fix the ethernet clock phandle ARM: pxa: Use - instead of @ for DT OPP entries ARM: dts: owl-s500: Add SPS node ARM: dts: owl-s500: Set CPU enable-method dt-bindings: arm: cpus: Add S500 enable-method ARM: dts: Add Actions Semi S500 and LeMaker Guitar dt-bindings: arm: Document Actions Semi S900 dt-bindings: timer: Document Owl timer ARM: dts: imx6q-cm-fx6: add sdio wifi/bt nodes dt-bindings: arm: Document Actions Semi S500 dt-bindings: Add vendor prefix for Actions Semi ARM: dts: turris-omnia: Add generic compatible string for I2C EEPROM ARM: dts: mvebu: add support for Linksys WRT3200ACM (Rango) ARM: dts: armada-385-linksys: fixup button node names ARM: dts: armada-385-linksys: group pins in pinctrl ...
2017-07-04Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "SoC platform changes (arch/arm/mach-*). This merge window, the bulk is for a few platforms: - Andres Färber adds initial support for the Actions Semi S500 (aka 'owl') platform, a close relative of the S900 platform he adds for arm64. - in mach-omap2, we remove more legacy code - Rockchips gains support for the RV1108 SoC designed for camera applications. - For Atmel, we gain support for MMU-less SoCs (SAME70/V71/S70/V70) - Minor updates for other platforms, including davinci, s3c64xx, prima2, stm32, broadcom nsp, amlogic, pxa, imx and renesas" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (74 commits) ARM: owl: smp: Drop bogus holding pen ARM: owl: Drop custom machine ARM: owl: smp: Implement SPS power-gating for CPU2 and CPU3 soc: actions: owl-sps: Factor out owl_sps_set_pg() for power-gating soc: actions: Add Owl SPS dt-bindings: power: Add Owl SPS power domains MAINTAINERS: Update Actions Semi section with SPS ARM: owl: Implement CPU enable-method for S500 MAINTAINERS: Add Actions Semi Owl section ARM: Prepare Actions Semi S500 ARM: socfpga: Increase max number of GPIOs ARM: stm32: Introduce MACH_STM32F469 flag ARM: prima2: remove redundant select CPU_V7 ARM: davinci: fix const warnings ARM: shmobile: pm-rmobile: Use GENPD_FLAG_ALWAYS_ON ARM: OMAP4: hwmod_data: add SHAM crypto accelerator ARM: OMAP4: hwmod data: add des ARM: OMAP4: hwmod data: add aes2 ARM: OMAP4: hwmod data: add aes1 ARM: pxa: Delete an error message for a failed memory allocation in pxa3xx_u2d_probe() ...
2017-07-04Merge tag 'armsoc-fixes-nc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull non-urgent ARM SoC fixes from Arnd Bergmann: "Smaller patches that didn't seem to find a home in other branches, and low-priority fixes from late in the merge window. - Lee Jones retires as bcm2835 (raspberry pi) co-maintainer. - a couple of bugfixes for the ARM CCN bus driver that were regarded not important enough - minor device tree fixes for the Renesas and Marvell platforms, that came a little late or did not justify have another pull request after the last -rc" * tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: bus: arm-ccn: Enable stats for CCN-502 interconnect dt-bindings: arm-ccn: Add bindings info for CCN-502 compatible string bus: arm-ccn: Use devm_kcalloc() in arm_ccn_probe() bus: arm-ccn: Fix module autoload MAINTAINERS: add RV1108 Rockchip soc to maintained files ARM: dts: kirkwood: Fix Openblock A6 nand partition overlap ARM: dts: armadillo800eva: Split LCD mux and gpio MAINTAINERS: Remove Lee Jones from bcm2835.
2017-07-04Merge tag 'for-v4.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "New drivers: - Linear ltc3651 charger driver - Motorola CPCAP battery fuel-gauge driver New chip/feature support: - bq27xxx: prepare for chip data setup - axp20x_battery: support max charge current setup New core features: - add Apple Brick ID type - support "supplied-from" device property for generic ACPI/pdata support - support strings for sysfs properties representing enums - introduce battery-info (backend is DT only for now) - provide reboot-mode header globally .. and misc fixes" * tag 'for-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (39 commits) power: supply: sbs-battery: Don't needlessly set CAPACITY_MODE power: supply: sbs-battery: Prevent CAPACITY_MODE races power: supply: bq24735: remove incorrect le16_to_cpu calls power: supply: sbs-battery: remove incorrect le16_to_cpu calls power: supply: cpcap-charger: Add missing power_supply_config power: supply: twl4030-charger: move allocation of iio channel to the beginning power: supply: twl4030-charger: allocate iio by devm_iio_channel_get() and fix error path power: supply: core: constify psy_tcd_ops. dt-bindings: power: supply: cpcap-battery: Add power-supplies property dt-bindings: power: supply: move max8903-charger.txt to proper location dt-bindings: power: supply: move maxim,max14656.txt to proper location power: supply: twl4030_charger: Use sysfs_match_string() helper power: reset: reboot-mode: Make include file global power: supply: axp20x_battery: add DT support for battery max constant charge current power: supply: axp20x_battery: add support for DT battery power: supply: bq27xxx: Add power_supply_battery_info support power: supply: bq27xxx: Add chip data memory read/write support power: supply: bq27xxx: Add bulk transfer bus methods dt-bindings: power: supply: bq27xxx: Add monitored-battery documentation power: supply: core: Add power_supply_prop_precharge ...
2017-07-04Merge tag 'pm-4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "The big ticket items here are the rework of suspend-to-idle in order to add proper support for power button wakeup from it on recent Dell laptops and the rework of interfaces exporting the current CPU frequency on x86. In addition to that, support for a few new pieces of hardware is added, the PCI/ACPI device wakeup infrastructure is simplified significantly and the wakeup IRQ framework is fixed to unbreak the IRQ bus locking infrastructure. Also, there are some functional improvements for intel_pstate, tools updates and small fixes and cleanups all over. Specifics: - Rework suspend-to-idle to allow it to take wakeup events signaled by the EC into account on ACPI-based platforms in order to properly support power button wakeup from suspend-to-idle on recent Dell laptops (Rafael Wysocki). That includes the core suspend-to-idle code rework, support for the Low Power S0 _DSM interface, and support for the ACPI INT0002 Virtual GPIO device from Hans de Goede (required for USB keyboard wakeup from suspend-to-idle to work on some machines). - Stop trying to export the current CPU frequency via /proc/cpuinfo on x86 as that is inaccurate and confusing (Len Brown). - Rework the way in which the current CPU frequency is exported by the kernel (over the cpufreq sysfs interface) on x86 systems with the APERF and MPERF registers by always using values read from these registers, when available, to compute the current frequency regardless of which cpufreq driver is in use (Len Brown). - Rework the PCI/ACPI device wakeup infrastructure to remove the questionable and artificial distinction between "devices that can wake up the system from sleep states" and "devices that can generate wakeup signals in the working state" from it, which allows the code to be simplified quite a bit (Rafael Wysocki). - Fix the wakeup IRQ framework by making it use SRCU instead of RCU which doesn't allow sleeping in the read-side critical sections, but which in turn is expected to be allowed by the IRQ bus locking infrastructure (Thomas Gleixner). - Modify some computations in the intel_pstate driver to avoid rounding errors resulting from them (Srinivas Pandruvada). - Reduce the overhead of the intel_pstate driver in the HWP (hardware-managed P-states) mode and when the "performance" P-state selection algorithm is in use by making it avoid registering scheduler callbacks in those cases (Len Brown). - Rework the energy_performance_preference sysfs knob in intel_pstate by changing the values that correspond to different symbolic hint names used by it (Len Brown). - Make it possible to use more than one cpuidle driver at the same time on ARM (Daniel Lezcano). - Make it possible to prevent the cpuidle menu governor from using the 0 state by disabling it via sysfs (Nicholas Piggin). - Add support for FFH (Fixed Functional Hardware) MWAIT in ACPI C1 on AMD systems (Yazen Ghannam). - Make the CPPC cpufreq driver take the lowest nonlinear performance information into account (Prashanth Prakash). - Add support for hi3660 to the cpufreq-dt driver, fix the imx6q driver and clean up the sfi, exynos5440 and intel_pstate drivers (Colin Ian King, Krzysztof Kozlowski, Octavian Purdila, Rafael Wysocki, Tao Wang). - Fix a few minor issues in the generic power domains (genpd) framework and clean it up somewhat (Krzysztof Kozlowski, Mikko Perttunen, Viresh Kumar). - Fix a couple of minor issues in the operating performance points (OPP) framework and clean it up somewhat (Viresh Kumar). - Fix a CONFIG dependency in the hibernation core and clean it up slightly (Balbir Singh, Arvind Yadav, BaoJun Luo). - Add rk3228 support to the rockchip-io adaptive voltage scaling (AVS) driver (David Wu). - Fix an incorrect bit shift operation in the RAPL power capping driver (Adam Lessnau). - Add support for the EPP field in the HWP (hardware managed P-states) control register, HWP.EPP, to the x86_energy_perf_policy tool and update msr-index.h with HWP.EPP values (Len Brown). - Fix some minor issues in the turbostat tool (Len Brown). - Add support for AMD family 0x17 CPUs to the cpupower tool and fix a minor issue in it (Sherry Hurwitz). - Assorted cleanups, mostly related to the constification of some data structures (Arvind Yadav, Joe Perches, Kees Cook, Krzysztof Kozlowski)" * tag 'pm-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (69 commits) cpufreq: Update scaling_cur_freq documentation cpufreq: intel_pstate: Clean up after performance governor changes PM: hibernate: constify attribute_group structures. cpuidle: menu: allow state 0 to be disabled intel_idle: Use more common logging style PM / Domains: Fix missing default_power_down_ok comment PM / Domains: Fix unsafe iteration over modified list of domains PM / Domains: Fix unsafe iteration over modified list of domain providers PM / Domains: Fix unsafe iteration over modified list of device links PM / Domains: Handle safely genpd_syscore_switch() call on non-genpd device PM / Domains: Call driver's noirq callbacks PM / core: Drop run_wake flag from struct dev_pm_info PCI / PM: Simplify device wakeup settings code PCI / PM: Drop pme_interrupt flag from struct pci_dev ACPI / PM: Consolidate device wakeup settings code ACPI / PM: Drop run_wake from struct acpi_device_wakeup_flags PM / QoS: constify *_attribute_group. PM / AVS: rockchip-io: add io selectors and supplies for rk3228 powercap/RAPL: prevent overridding bits outside of the mask PM / sysfs: Constify attribute groups ...
2017-07-04Merge tag 'spi-v4.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "There's only one big change in this release but it's a very big change: Geert Uytterhoeven has implemented support for SPI slave mode. This feature has been on the cards since the subsystem was originally merged back in the mists of time so it's great that Geert stepped up and finally implemented it. - SPI slave support, together with wholesale renaming of SPI controllers from master to controller which went surprisingly smoothly. This is already used with Renesas SoCs and support is in the works for i.MX too. - New drivers for Meson SPICC and ST STM32" * tag 'spi-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (57 commits) spi: loopback-test: Fix kfree() NULL pointer error. spi: loopback-test: fix spelling mistake: "reruning" -> "rerunning" spi: sirf: fix spelling mistake: "registerred" -> "registered" spi: stm32: fix potential dereference null return value spi: stm32: enhance DMA error management spi: stm32: add runtime PM support spi: stm32: use normal conditional statements instead of ternary operator spi: stm32: replace st, spi-midi with st, spi-midi-ns to fit bindings spi: stm32: fix example with st, spi-midi-ns property spi: stm32: fix compatible to fit with new bindings spi: stm32: use SoC specific compatible spi: rockchip: Disable Runtime PM when chip select is asserted spi: rockchip: Set GPIO_SS flag to enable Slave Select with GPIO CS spi: atmel: fix corrupted data issue on SAM9 family SoCs spi: stm32: fix error check on mbr being -ve spi: add driver for STM32 SPI controller spi: Document the STM32 SPI bindings spi/bcm63xx: Fix checkpatch warnings spi: imx: Check for allocation failure earlier spi: mediatek: add spi support for mt2712 IC ...
2017-07-04Merge tag 'regulator-v4.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "A quiet release for the regulator API, a series of fairly small fixes plus one new feature and a few new drivers: - Support for regulators with different settling times for rising and falling voltage changes. - New drivers for Allwinner AXP803, HiSilicon HI6421V530 and TI LP87565" * tag 'regulator-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (21 commits) regulator: core: Fix size limit of supply_map regulator: core: Fix voltage change propagations to supply regulators regulator: lp87565: Fix the initial voltage range regulator: tps65910: wire up sleep control configuration regulator: hi6421v530: Describe consumed platform device regulator: tps65910: check TPS65910_NUM_REGS at build time regulator: core: Prioritise consumer mappings over regulator name regulator: lp87565: Fix the GPL header regulator: hi6421: Describe consumed platform device regulator: hi6421v530: add driver for hi6421v530 voltage regulator regulator: da9061: BUCK and LDO regulator driver regulator: bd9571mwv: Statize local symbols regulator: tps65917: Add support for SMPS12 regulator: lp87565: Add support for lp87565 PMIC regulators regulator: axp20x-regulator: add support for AXP803 regulator: lp8755: fix spelling mistake "acceess" -> "access" regulator: Allow for asymmetric settling times regulator: DT: Add properties for asymmetric settling times regulator: palmas: Drop unnecessary static MAINTAINERS: Update MAX77802 PMIC entry ...
2017-07-04Merge tag 'hwmon-for-linus-v4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: - Add PMBus client driver for IR35221 - Add support for NCT6795D to nct6775 driver - Functional improvements to adt7475, aspeed-pwm-tacho, and ibmpowernv drivers - Minor fixes and cleanups in various drivers * tag 'hwmon-for-linus-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (22 commits) hwmon: (aspeed-pwm-tacho) Poll with short sleeps. hwmon: (aspeed-pwm-tacho) reduce fan_tach period hwmon: (ibmpowernv) Add current(A) sensor hwmon: (ibmpowernv) introduce a legacy_compatibles array hwmon: (pwm-fan) Switch to new atomic PWM API hwmon: (scpi) Fix the scale of SCP sensor readings hwmon: (aspeed-pwm-tacho) Enable both edge measurement. hwmon: (ibmpowernv) Add highest/lowest attributes to sensors hwmon: (pmbus) move header file out of I2C realm hwmon: (max6639) move header file out of I2C realm hwmon: (ltc4245) move header file out of I2C realm hwmon: (ds620) move header file out of I2C realm hwmon: (ads1015) move header file out of I2C realm hwmon: (adt7475) temperature smoothing hwmon: (adt7475) add high frequency support hwmon: (adt7475) fan stall prevention hwmon: (adt7475) replace find_nearest() with find_closest() hwmon: (pmbus) Add client driver for IR35221 hwmon: (nct6775) Add support for NCT6795D hwmon: (nct6775) Improve fan detection ...
2017-07-04Merge tag 'mmc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "MMC core: - Add support to enable irq wake for slot gpio - Remove MMC_CAP2_HC_ERASE_SZ and make it the default behaviour - Improve R1 response error checks for stop commands - Cleanup and clarify some MMC specific code - Keep card runtime resumed while adding SDIO function devices - Use device_property_read instead of of_property_read in mmc_of_parse() - Move boot partition locking into a driver op to enable proper I/O scheduling - Move multi/single-ioctl() to use block layer to enable proper I/O scheduling - Delete bounce buffer Kconfig option - Improve the eMMC HW reset support provided via the eMMC pwrseq - Add host API to manage SDIO IRQs from a workqueue MMC host: - dw_mmc: Drop support for multiple slots - dw_mmc: Use device_property_read instead of of_property_read - dw_mmc-rockchip: Optional improved tuning to greatly decrease tuning time - dw_mmc: Prevent rpm suspend for SDIO IRQs instead of always for SDIO cards - dw_mmc: Convert to use MMC_CAP2_SDIO_IRQ_NOTHREAD for SDIO IRQs - omap_hsmmc: Convert to mmc regulator APIs to consolidate code - omap_hsmmc: Deprecate "vmmc_aux" in DT and use "vqmmc" instead - tmio: make sure SDIO gets reinitialized after resume - sdhi: add CMD23 support to R-Car Gen2 & Gen3 - tmio: add CMD23 support - sdhi/tmio: Refactor code and rename files to simplify Kconfig options - sdhci-pci: Enable card detect wake for Intel BYT-related SD controllers - sdhci-pci: Add support for Intel CNP - sdhci-esdhc-imx: Remove ENGcm07207 workaround - allow multi block transfers - sdhci-esdhc-imx: Allow all supported prescaler values - sdhci-esdhc-imx: Fix DAT line software reset - sdhci-esdhc: Add SDHCI_QUIRK_32BIT_DMA_ADDR - atmel-mci: Drop AVR32 support" * tag 'mmc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits) mmc: dw_mmc: remove the unnecessary slot variable mmc: dw_mmc: use the 'slot' instead of 'cur_slot' mmc: dw_mmc: remove the 'id' arguments about functions relevant to slot mmc: dw_mmc: change the array of slots mmc: dw_mmc: remove the loop about finding slots mmc: dw_mmc: deprecated the "num-slots" property mmc: dw_mmc-rockchip: parse rockchip, desired-num-phases from DT dt-bindings: rockchip-dw-mshc: add optional rockchip, desired-num-phases mmc: renesas-sdhi: improve checkpatch cleanness mmc: tmio: improve checkpatch cleanness mmc: sdhci-pci: Enable card detect wake for Intel BYT-related SD controllers mmc: slot-gpio: Add support to enable irq wake on cd_irq mmc: core: Remove MMC_CAP2_HC_ERASE_SZ mmc: core: for data errors, take response of stop cmd into account mmc: core: check also R1 response for stop commands mmc: core: Clarify code for sending CSD mmc: core: Drop mmc_all_send_cid() and use mmc_send_cxd_native() instead mmc: core: Re-factor code for sending CID mmc: core: Remove redundant code in mmc_send_cid() mmc: core: Make mmc_can_reset() static ...
2017-07-03Merge tag 'docs-4.13' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation updates from Jonathan Corbet: "There has been a fair amount of activity in the docs tree this time around. Highlights include: - Conversion of a bunch of security documentation into RST - The conversion of the remaining DocBook templates by The Amazing Mauro Machine. We can now drop the entire DocBook build chain. - The usual collection of fixes and minor updates" * tag 'docs-4.13' of git://git.lwn.net/linux: (90 commits) scripts/kernel-doc: handle DECLARE_HASHTABLE Documentation: atomic_ops.txt is core-api/atomic_ops.rst Docs: clean up some DocBook loose ends Make the main documentation title less Geocities Docs: Use kernel-figure in vidioc-g-selection.rst Docs: fix table problems in ras.rst Docs: Fix breakage with Sphinx 1.5 and upper Docs: Include the Latex "ifthen" package doc/kokr/howto: Only send regression fixes after -rc1 docs-rst: fix broken links to dynamic-debug-howto in kernel-parameters doc: Document suitability of IBM Verse for kernel development Doc: fix a markup error in coding-style.rst docs: driver-api: i2c: remove some outdated information Documentation: DMA API: fix a typo in a function name Docs: Insert missing space to separate link from text doc/ko_KR/memory-barriers: Update control-dependencies example Documentation, kbuild: fix typo "minimun" -> "minimum" docs: Fix some formatting issues in request-key.rst doc: ReSTify keys-trusted-encrypted.txt doc: ReSTify keys-request-key.txt ...
2017-07-03Merge tag 'char-misc-4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the "big" char/misc driver patchset for 4.13-rc1. Lots of stuff in here, a large thunderbolt update, w1 driver header reorg, the new mux driver subsystem, google firmware driver updates, and a raft of other smaller things. Full details in the shortlog. All of these have been in linux-next for a while with the only reported issue being a merge problem with this tree and the jc-docs tree in the w1 documentation area" * tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (147 commits) misc: apds990x: Use sysfs_match_string() helper mei: drop unreachable code in mei_start mei: validate the message header only in first fragment. DocBook: w1: Update W1 file locations and names in DocBook mux: adg792a: always require I2C support nvmem: rockchip-efuse: add support for rk322x-efuse nvmem: core: add locking to nvmem_find_cell nvmem: core: Call put_device() in nvmem_unregister() nvmem: core: fix leaks on registration errors nvmem: correct Broadcom OTP controller driver writes w1: Add subsystem kernel public interface drivers/fsi: Add module license to core driver drivers/fsi: Use asynchronous slave mode drivers/fsi: Add hub master support drivers/fsi: Add SCOM FSI client device driver drivers/fsi/gpio: Add tracepoints for GPIO master drivers/fsi: Add GPIO based FSI master drivers/fsi: Document FSI master sysfs files in ABI drivers/fsi: Add error handling for slave drivers/fsi: Add tracepoints for low-level operations ...
2017-07-03Merge tag 'driver-core-4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big driver core update for 4.13-rc1. The large majority of this is a lot of cleanup of old fields in the driver core structures and their remaining usages in random drivers. All of those fixes have been reviewed by the various subsystem maintainers. There's also some small firmware updates in here, a new kobject uevent api interface that makes userspace interaction easier, and a few other minor things. All of these have been in linux-next for a long while with no reported issues" * tag 'driver-core-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (56 commits) arm: mach-rpc: ecard: fix build error zram: convert remaining CLASS_ATTR() to CLASS_ATTR_RO() driver-core: remove struct bus_type.dev_attrs powerpc: vio_cmo: use dev_groups and not dev_attrs for bus_type powerpc: vio: use dev_groups and not dev_attrs for bus_type USB: usbip: convert to use DRIVER_ATTR_RW s390: drivers: convert to use DRIVER_ATTR_RO/WO platform: thinkpad_acpi: convert to use DRIVER_ATTR_RO/RW pcmcia: ds: convert to use DRIVER_ATTR_RO wireless: ipw2x00: convert to use DRIVER_ATTR_RW net: ehea: convert to use DRIVER_ATTR_RO net: caif: convert to use DRIVER_ATTR_RO TTY: hvc: convert to use DRIVER_ATTR_RW PCI: pci-driver: convert to use DRIVER_ATTR_WO IB: nes: convert to use DRIVER_ATTR_RW HID: hid-core: convert to use DRIVER_ATTR_RO and drv_groups arm: ecard: fix dev_groups patch typo tty: serdev: use dev_groups and not dev_attrs for bus_type sparc: vio: use dev_groups and not dev_attrs for bus_type hid: intel-ish-hid: use dev_groups and not dev_attrs for bus_type ...
2017-07-03Merge tag 'tty-4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the large tty/serial patchset for 4.13-rc1. A lot of tty and serial driver updates are in here, along with some fixups for some __get/put_user usages that were reported. Nothing huge, just lots of development by a number of different developers, full details in the shortlog. All of these have been in linux-next for a while" * tag 'tty-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (71 commits) tty: serial: lpuart: add a more accurate baud rate calculation method tty: serial: lpuart: add earlycon support for imx7ulp tty: serial: lpuart: add imx7ulp support dt-bindings: serial: fsl-lpuart: add i.MX7ULP support tty: serial: lpuart: add little endian 32 bit register support tty: serial: lpuart: refactor lpuart32_{read|write} prototype tty: serial: lpuart: introduce lpuart_soc_data to represent SoC property serial: imx-serial - move DMA buffer configuration to DT serial: imx: Enable RTSD only when needed serial: imx: Remove unused members from imx_port struct serial: 8250: 8250_omap: Fix race b/w dma completion and RX timeout serial: 8250: Fix THRE flag usage for CAP_MINI tty/serial: meson_uart: update to stable bindings dt-bindings: serial: Add bindings for the Amlogic Meson UARTs serial: Delete dead code for CIR serial ports serial: sirf: make of_device_ids const serial/mpsc: switch to dma_alloc_attrs tty: serial: Add Actions Semi Owl UART earlycon dt-bindings: serial: Document Actions Semi Owl UARTs tty/serial: atmel: make the driver DT only ...
2017-07-03Merge tag 'staging-4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO updates from Greg KH: "Here's the large set of staging and iio driver patches for 4.13-rc1. After over 500 patches, we removed about 200 more lines of code than we added, not great, but we added some new IIO drivers for unsupported hardware, so it's an overall win. Also here are lots of small fixes, and some tty core api additions (with the tty maintainer's ack) for the speakup drivers, those are finally getting some much needed cleanups and are looking much better now than before. Full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (529 commits) staging: lustre: replace kmalloc with kmalloc_array Staging: ion: fix code style warning from NULL comparisons staging: fsl-mc: make dprc.h header private staging: fsl-mc: move mc-cmd.h contents in the public header staging: fsl-mc: move mc-sys.h contents in the public header staging: fsl-mc: fix a few implicit includes staging: fsl-mc: remove dpmng API files staging: fsl-mc: move rest of mc-bus.h to private header staging: fsl-mc: move couple of definitions to public header staging: fsl-mc: move irq domain creation prototype to public header staging: fsl-mc: turn several exported functions static staging: fsl-mc: delete prototype of unimplemented function staging: fsl-mc: delete duplicated function prototypes staging: fsl-mc: decouple the mc-bus public headers from dprc.h staging: fsl-mc: drop useless #includes staging: fsl-mc: be consistent when checking strcmp() return staging: fsl-mc: move comparison before strcmp() call staging: speakup: make function ser_to_dev static staging: ks7010: fix spelling mistake: "errror" -> "error" staging: rtl8192e: fix spelling mistake: "respose" -> "response" ...
2017-07-03Merge tag 'usb-4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big patchset of USB and PHY driver updates for 4.13-rc1. On the PHY side, they decided to move files around to "make things easier" in their tree. Hopefully that wasn't a mistake, but in linux-next testing, we haven't had any reported problems. There's the usual set of gadget and xhci and musb updates in here as well, along with a number of smaller updates for a raft of different USB drivers. Full details in the shortlog, nothing really major. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (173 commits) Add USB quirk for HVR-950q to avoid intermittent device resets USB hub_probe: rework ugly goto-into-compound-statement usb: host: ohci-pxa27x: Handle return value of clk_prepare_enable USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick usbip: Fix uninitialized variable bug in vhci usb: core: read USB ports from DT in the usbport LED trigger driver dt-bindings: leds: document new trigger-sources property usb: typec: ucsi: Add ACPI driver usb: typec: Add support for UCSI interface usb: musb: compress return logic into one line USB: serial: propagate late probe errors USB: serial: refactor port endpoint setup usb: musb: tusb6010_omap: Convert to DMAengine API ARM: OMAP2+: DMA: Add slave map entries for 24xx external request lines usb: musb: tusb6010: Handle DMA TX completion in DMA callback as well usb: musb: tusb6010_omap: Allocate DMA channels upfront usb: musb: tusb6010_omap: Create new struct for DMA data/parameters usb: musb: tusb6010_omap: Use one musb_ep_select call in tusb_omap_dma_program usb: musb: tusb6010: Add MUSB_G_NO_SKB_RESERVE to quirks usb: musb: Add quirk to avoid skb reserve in gadget mode ...
2017-07-03Merge branch 'ras-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS updates from Thomas Gleixner: "The RAS updates for the 4.13 merge window: - Cleanup of the MCE injection facility (Borsilav Petkov) - Rework of the AMD/SMCA handling (Yazen Ghannam) - Enhancements for ACPI/APEI to handle new notitication types (Shiju Jose) - atomic_t to refcount_t conversion (Elena Reshetova) - A few fixes and enhancements all over the place" * 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: RAS/CEC: Check the correct variable in the debugfs error handling x86/mce: Always save severity in machine_check_poll() x86/MCE, xen/mcelog: Make /dev/mcelog registration messages more precise x86/mce: Update bootlog description to reflect behavior on AMD x86/mce: Don't disable MCA banks when offlining a CPU on AMD x86/mce/mce-inject: Preset the MCE injection struct x86/mce: Clean up include files x86/mce: Get rid of register_mce_write_callback() x86/mce: Merge mce_amd_inj into mce-inject x86/mce/AMD: Use saved threshold block info in interrupt handler x86/mce/AMD: Use msr_stat when clearing MCA_STATUS x86/mce/AMD: Carve out SMCA bank configuration x86/mce/AMD: Redo error logging from APIC LVT interrupt handlers x86/mce: Convert threshold_bank.cpus from atomic_t to refcount_t RAS: Make local function parse_ras_param() static ACPI/APEI: Handle GSIV and GPIO notification types
2017-07-03Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The irq department delivers: - Expand the generic infrastructure handling the irq migration on CPU hotplug and convert X86 over to it. (Thomas Gleixner) Aside of consolidating code this is a preparatory change for: - Finalizing the affinity management for multi-queue devices. The main change here is to shut down interrupts which are affine to a outgoing CPU and reenabling them when the CPU comes online again. That avoids moving interrupts pointlessly around and breaking and reestablishing affinities for no value. (Christoph Hellwig) Note: This contains also the BLOCK-MQ and NVME changes which depend on the rework of the irq core infrastructure. Jens acked them and agreed that they should go with the irq changes. - Consolidation of irq domain code (Marc Zyngier) - State tracking consolidation in the core code (Jeffy Chen) - Add debug infrastructure for hierarchical irq domains (Thomas Gleixner) - Infrastructure enhancement for managing generic interrupt chips via devmem (Bartosz Golaszewski) - Constification work all over the place (Tobias Klauser) - Two new interrupt controller drivers for MVEBU (Thomas Petazzoni) - The usual set of fixes, updates and enhancements all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (112 commits) irqchip/or1k-pic: Fix interrupt acknowledgement irqchip/irq-mvebu-gicp: Allocate enough memory for spi_bitmap irqchip/gic-v3: Fix out-of-bound access in gic_set_affinity nvme: Allocate queues for all possible CPUs blk-mq: Create hctx for each present CPU blk-mq: Include all present CPUs in the default queue mapping genirq: Avoid unnecessary low level irq function calls genirq: Set irq masked state when initializing irq_desc genirq/timings: Add infrastructure for estimating the next interrupt arrival time genirq/timings: Add infrastructure to track the interrupt timings genirq/debugfs: Remove pointless NULL pointer check irqchip/gic-v3-its: Don't assume GICv3 hardware supports 16bit INTID irqchip/gic-v3-its: Add ACPI NUMA node mapping irqchip/gic-v3-its-platform-msi: Make of_device_ids const irqchip/gic-v3-its: Make of_device_ids const irqchip/irq-mvebu-icu: Add new driver for Marvell ICU irqchip/irq-mvebu-gicp: Add new driver for Marvell GICP dt-bindings/interrupt-controller: Add DT binding for the Marvell ICU genirq/irqdomain: Remove auto-recursive hierarchy support irqchip/MSI: Use irq_domain_update_bus_token instead of an open coded access ...
2017-07-03Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "A rather large update for timers/timekeeping: - compat syscall consolidation (Al Viro) - Posix timer consolidation (Christoph Helwig / Thomas Gleixner) - Cleanup of the device tree based initialization for clockevents and clocksources (Daniel Lezcano) - Consolidation of the FTTMR010 clocksource/event driver (Linus Walleij) - The usual set of small fixes and updates all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (93 commits) timers: Make the cpu base lock raw clocksource/drivers/mips-gic-timer: Fix an error code in 'gic_clocksource_of_init()' clocksource/drivers/fsl_ftm_timer: Unmap region obtained by of_iomap clocksource/drivers/tcb_clksrc: Make IO endian agnostic clocksource/drivers/sun4i: Switch to the timer-of common init clocksource/drivers/timer-of: Fix invalid iomap check Revert "ktime: Simplify ktime_compare implementation" clocksource/drivers: Fix uninitialized variable use in timer_of_init kselftests: timers: Add test for frequency step kselftests: timers: Fix inconsistency-check to not ignore first timestamp time: Add warning about imminent deprecation of CONFIG_GENERIC_TIME_VSYSCALL_OLD time: Clean up CLOCK_MONOTONIC_RAW time handling posix-cpu-timers: Make timespec to nsec conversion safe itimer: Make timeval to nsec conversion range limited timers: Fix parameter description of try_to_del_timer_sync() ktime: Simplify ktime_compare implementation clocksource/drivers/fttmr010: Factor out clock read code clocksource/drivers/fttmr010: Implement delay timer clocksource/drivers: Add timer-of common init routine clocksource/drivers/tcb_clksrc: Save timer context on suspend/resume ...
2017-07-03Merge branch 'x86-boot-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 boot updates from Ingo Molnar: "The main changes in this cycle were KASLR improvements for rare environments with special boot options, by Baoquan He. Also misc smaller changes/cleanups" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/debug: Extend the lower bound of crash kernel low reservations x86/boot: Remove unused copy_*_gs() functions x86/KASLR: Use the right memcpy() implementation Documentation/kernel-parameters.txt: Update 'memmap=' boot option description x86/KASLR: Handle the memory limit specified by the 'memmap=' and 'mem=' boot options x86/KASLR: Parse all 'memmap=' boot option entries
2017-07-03Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The main changes in this cycle were: - Add the SYSTEM_SCHEDULING bootup state to move various scheduler debug checks earlier into the bootup. This turns silent and sporadically deadly bugs into nice, deterministic splats. Fix some of the splats that triggered. (Thomas Gleixner) - A round of restructuring and refactoring of the load-balancing and topology code (Peter Zijlstra) - Another round of consolidating ~20 of incremental scheduler code history: this time in terms of wait-queue nomenclature. (I didn't get much feedback on these renaming patches, and we can still easily change any names I might have misplaced, so if anyone hates a new name, please holler and I'll fix it.) (Ingo Molnar) - sched/numa improvements, fixes and updates (Rik van Riel) - Another round of x86/tsc scheduler clock code improvements, in hope of making it more robust (Peter Zijlstra) - Improve NOHZ behavior (Frederic Weisbecker) - Deadline scheduler improvements and fixes (Luca Abeni, Daniel Bristot de Oliveira) - Simplify and optimize the topology setup code (Lauro Ramos Venancio) - Debloat and decouple scheduler code some more (Nicolas Pitre) - Simplify code by making better use of llist primitives (Byungchul Park) - ... plus other fixes and improvements" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits) sched/cputime: Refactor the cputime_adjust() code sched/debug: Expose the number of RT/DL tasks that can migrate sched/numa: Hide numa_wake_affine() from UP build sched/fair: Remove effective_load() sched/numa: Implement NUMA node level wake_affine() sched/fair: Simplify wake_affine() for the single socket case sched/numa: Override part of migrate_degrades_locality() when idle balancing sched/rt: Move RT related code from sched/core.c to sched/rt.c sched/deadline: Move DL related code from sched/core.c to sched/deadline.c sched/cpuset: Only offer CONFIG_CPUSETS if SMP is enabled sched/fair: Spare idle load balancing on nohz_full CPUs nohz: Move idle balancer registration to the idle path sched/loadavg: Generalize "_idle" naming to "_nohz" sched/core: Drop the unused try_get_task_struct() helper function sched/fair: WARN() and refuse to set buddy when !se->on_rq sched/debug: Fix SCHED_WARN_ON() to return a value on !CONFIG_SCHED_DEBUG as well sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming sched/wait: Move bit_wait_table[] and related functionality from sched/core.c to sched/wait_bit.c sched/wait: Split out the wait_bit*() APIs from <linux/wait.h> into <linux/wait_bit.h> sched/wait: Re-adjust macro line continuation backslashes in <linux/wait.h> ...
2017-07-03Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "The sole purpose of these changes is to shrink and simplify the RCU code base, which has suffered from creeping bloat over the past couple of years. The end result is a net removal of ~2700 lines of code: 79 files changed, 1496 insertions(+), 4211 deletions(-) Plus there's a marked reduction in the Kconfig space complexity as well, here's the number of matches on 'grep RCU' in the .config: before after x86-defconfig 17 15 x86-allmodconfig 33 20" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (86 commits) rcu: Remove RCU CPU stall warnings from Tiny RCU rcu: Remove event tracing from Tiny RCU rcu: Move RCU debug Kconfig options to kernel/rcu rcu: Move RCU non-debug Kconfig options to kernel/rcu rcu: Eliminate NOCBs CPU-state Kconfig options rcu: Remove debugfs tracing srcu: Remove Classic SRCU srcu: Fix rcutorture-statistics typo rcu: Remove SPARSE_RCU_POINTER Kconfig option rcu: Remove the now-obsolete PROVE_RCU_REPEATEDLY Kconfig option rcu: Remove typecheck() from RCU locking wrapper functions rcu: Remove #ifdef moving rcu_end_inkernel_boot from rcupdate.h rcu: Remove nohz_full full-system-idle state machine rcu: Remove the RCU_KTHREAD_PRIO Kconfig option rcu: Remove *_SLOW_* Kconfig options srcu: Use rnp->lock wrappers to replace explicit memory barriers rcu: Move rnp->lock wrappers for SRCU use rcu: Convert rnp->lock wrappers to macros for SRCU use rcu: Refactor #includes from include/linux/rcupdate.h bcm47xx: Fix build regression ...
2017-07-03Merge branch 'for-4.13/block' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull core block/IO updates from Jens Axboe: "This is the main pull request for the block layer for 4.13. Not a huge round in terms of features, but there's a lot of churn related to some core cleanups. Note this depends on the UUID tree pull request, that Christoph already sent out. This pull request contains: - A series from Christoph, unifying the error/stats codes in the block layer. We now use blk_status_t everywhere, instead of using different schemes for different places. - Also from Christoph, some cleanups around request allocation and IO scheduler interactions in blk-mq. - And yet another series from Christoph, cleaning up how we handle and do bounce buffering in the block layer. - A blk-mq debugfs series from Bart, further improving on the support we have for exporting internal information to aid debugging IO hangs or stalls. - Also from Bart, a series that cleans up the request initialization differences across types of devices. - A series from Goldwyn Rodrigues, allowing the block layer to return failure if we will block and the user asked for non-blocking. - Patch from Hannes for supporting setting loop devices block size to that of the underlying device. - Two series of patches from Javier, fixing various issues with lightnvm, particular around pblk. - A series from me, adding support for write hints. This comes with NVMe support as well, so applications can help guide data placement on flash to improve performance, latencies, and write amplification. - A series from Ming, improving and hardening blk-mq support for stopping/starting and quiescing hardware queues. - Two pull requests for NVMe updates. Nothing major on the feature side, but lots of cleanups and bug fixes. From the usual crew. - A series from Neil Brown, greatly improving the bio rescue set support. Most notably, this kills the bio rescue work queues, if we don't really need them. - Lots of other little bug fixes that are all over the place" * 'for-4.13/block' of git://git.kernel.dk/linux-block: (217 commits) lightnvm: pblk: set line bitmap check under debug lightnvm: pblk: verify that cache read is still valid lightnvm: pblk: add initialization check lightnvm: pblk: remove target using async. I/Os lightnvm: pblk: use vmalloc for GC data buffer lightnvm: pblk: use right metadata buffer for recovery lightnvm: pblk: schedule if data is not ready lightnvm: pblk: remove unused return variable lightnvm: pblk: fix double-free on pblk init lightnvm: pblk: fix bad le64 assignations nvme: Makefile: remove dead build rule blk-mq: map all HWQ also in hyperthreaded system nvmet-rdma: register ib_client to not deadlock in device removal nvme_fc: fix error recovery on link down. nvmet_fc: fix crashes on bad opcodes nvme_fc: Fix crash when nvme controller connection fails. nvme_fc: replace ioabort msleep loop with completion nvme_fc: fix double calls to nvme_cleanup_cmd() nvme-fabrics: verify that a controller returns the correct NQN nvme: simplify nvme_dev_attrs_are_visible ...
2017-07-03Merge remote-tracking branches 'regulator/topic/settle', ↵Mark Brown
'regulator/topic/tps65910' and 'regulator/topic/tps65917' into regulator-next
2017-07-03Merge remote-tracking branches 'spi/topic/spidev', 'spi/topic/st-ssc4' and ↵Mark Brown
'spi/topic/stm32' into spi-next
2017-07-03Merge remote-tracking branches 'spi/topic/orion', 'spi/topic/pxa2xx', ↵Mark Brown
'spi/topic/rockchip', 'spi/topic/sh-msiof' and 'spi/topic/sirf' into spi-next
2017-07-03Merge remote-tracking branches 'spi/topic/loopback', ↵Mark Brown
'spi/topic/meson-spicc', 'spi/topic/mtk' and 'spi/topic/omap2-mcspi' into spi-next
2017-07-03Merge remote-tracking branch 'spi/topic/master' into spi-nextMark Brown
2017-07-03Merge branch 'acpi-pm'Rafael J. Wysocki
* acpi-pm: PM / core: Drop run_wake flag from struct dev_pm_info PCI / PM: Simplify device wakeup settings code PCI / PM: Drop pme_interrupt flag from struct pci_dev ACPI / PM: Consolidate device wakeup settings code ACPI / PM: Drop run_wake from struct acpi_device_wakeup_flags ACPI / sleep: EC-based wakeup from suspend-to-idle on recent systems platform: x86: intel-hid: Wake up the system from suspend-to-idle platform: x86: intel-vbtn: Wake up the system from suspend-to-idle ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle platform/x86: Add driver for ACPI INT0002 Virtual GPIO device PCI / PM: Restore PME Enable if skipping wakeup setup PM / sleep: Print timing information if debug is enabled ACPI / PM: Clean up device wakeup enable/disable code ACPI / PM: Change log level of wakeup-related message USB / PCI / PM: Allow the PCI core to do the resume cleanup ACPI / PM: Run wakeup notify handlers synchronously Conflicts: drivers/base/power/main.c
2017-07-03Merge branches 'pm-domains', 'pm-avs' and 'powercap'Rafael J. Wysocki
* pm-domains: PM / Domains: Fix missing default_power_down_ok comment PM / Domains: Fix unsafe iteration over modified list of domains PM / Domains: Fix unsafe iteration over modified list of domain providers PM / Domains: Fix unsafe iteration over modified list of device links PM / Domains: Handle safely genpd_syscore_switch() call on non-genpd device PM / Domains: Call driver's noirq callbacks PM / Domains: Constify genpd pointer PM / Domains: pdd->dev can't be NULL in genpd_dev_pm_qos_notifier() * pm-avs: PM / AVS: rockchip-io: add io selectors and supplies for rk3228 * powercap: powercap/RAPL: prevent overridding bits outside of the mask
2017-07-03Merge branches 'pm-core', 'pm-opp' and 'pm-qos'Rafael J. Wysocki
* pm-core: PM / sysfs: Constify attribute groups PM: Constify info string used in messages PM: Constify returned PM event name PM / wakeirq: Convert to SRCU * pm-opp: PM / OPP: Add dev_pm_opp_{set|put}_clkname() PM / OPP: Use - instead of @ for DT entries PM / OPP: Don't create debugfs "supply-0" directory unnecessarily PM / OPP: opp-microvolt is not optional if regulators are set PM / OPP: Don't create copy of regulators unnecessarily PM / OPP: Reorganize _generic_set_opp_regulator() * pm-qos: PM / QoS: constify *_attribute_group.
2017-07-03Merge branches 'pm-cpufreq', 'intel_pstate' and 'pm-cpuidle'Rafael J. Wysocki
* pm-cpufreq: cpufreq / CPPC: Initialize policy->min to lowest nonlinear performance cpufreq: sfi: make freq_table static cpufreq: exynos5440: Fix inconsistent indenting cpufreq: imx6q: imx6ull should use the same flow as imx6ul cpufreq: dt: Add support for hi3660 * intel_pstate: cpufreq: Update scaling_cur_freq documentation cpufreq: intel_pstate: Clean up after performance governor changes intel_pstate: skip scheduler hook when in "performance" mode intel_pstate: delete scheduler hook in HWP mode x86: use common aperfmperf_khz_on_cpu() to calculate KHz using APERF/MPERF cpufreq: intel_pstate: Remove max/min fractions to limit performance x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz" * pm-cpuidle: cpuidle: menu: allow state 0 to be disabled intel_idle: Use more common logging style x86/ACPI/cstate: Allow ACPI C1 FFH MWAIT use on AMD systems ARM: cpuidle: Support asymmetric idle definition
2017-07-03Documentation: fix wrong example commandMatteo Croce
In the IPVLAN documentation there is an example command line where the master and slave interface names are inverted. Fix the command line and also add the optional `name' keyword to better describe what the command is doing. v2: added commit message Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01Merge tag 'nfc-next-4.13-1' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next Samuel Ortiz says: ==================== NFC 4.13 pull request This is the NFC pull requesy for 4.13. We have: - A conversion to unified device and GPIO APIs for the fdp, pn544, and st{21,-nci} drivers. - A fix for NFC device IDs allocation. - A fix for the nfcmrvl driver firmware download mechanism. - A trf7970a DT and GPIO cleanup and clock setting fix. - A few fixes for potential overflows in the digital and LLCP code. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-30net: macb: Add tsu_clk to device treeRafal Ozieblo
Signed-off-by: Rafal Ozieblo <rafalo@cadence.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
A set of overlapping changes in macvlan and the rocker driver, nothing serious. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29cpufreq: Update scaling_cur_freq documentationRafael J. Wysocki
Commit f8475cef9008 "x86: use common aperfmperf_khz_on_cpu() to calculate KHz using APERF/MPERF" modified the way the scaling_cur_freq cpufreq policy attribute in sysfs is handled on contemporary Intel-based x86 systems, so update the documentation to reflect that change. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-29cpufreq: intel_pstate: Clean up after performance governor changesRafael J. Wysocki
After commit 82b4e03e01bc (intel_pstate: skip scheduler hook when in "performance" mode) get_target_pstate_use_performance() and get_target_pstate_use_cpu_load() are never called if scaling_governor is "performance", so drop the CPUFREQ_POLICY_PERFORMANCE checks from them as they will never trigger anyway. Moreover, the documentation needs to be updated to reflect the change made by the above commit, so do that too. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2017-06-29Merge tag 'actions-drivers-for-4.13' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/drivers Pull "Actions Semi SoC drivers for 4.13" from Andreas Färber: This adds clock source and power domain drivers for S500/S900. * tag 'actions-drivers-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions: soc: actions: owl-sps: Factor out owl_sps_set_pg() for power-gating soc: actions: Add Owl SPS dt-bindings: power: Add Owl SPS power domains clocksource: owl: Add S900 support clocksource: Add Owl timer