Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
- Smattering of miscellanous fixes
- A five patch series for i40iw that had a patch (5/5) that was larger
than I would like, but I took it because it's needed for large scale
users
- An 8 patch series for bnxt_re that landed right as I was leaving on
PTO and so had to wait until now...they are all appropriate fixes for
-rc IMO
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (22 commits)
bnxt_re: Don't issue cmd to delete GID for QP1 GID entry before the QP is destroyed
bnxt_re: Fix memory leak in FRMR path
bnxt_re: Remove RTNL lock dependency in bnxt_re_query_port
bnxt_re: Fix race between the netdev register and unregister events
bnxt_re: Free up devices in module_exit path
bnxt_re: Fix compare and swap atomic operands
bnxt_re: Stop issuing further cmds to FW once a cmd times out
bnxt_re: Fix update of qplib_qp.mtu when modified
i40iw: Add support for port reuse on active side connections
i40iw: Add missing VLAN priority
i40iw: Call i40iw_cm_disconn on modify QP to disconnect
i40iw: Prevent multiple netdev event notifier registrations
i40iw: Fail open if there are no available MSI-X vectors
RDMA/vmw_pvrdma: Fix reporting correct opcodes for completion
IB/bnxt_re: Fix frame stack compilation warning
IB/mlx5: fix debugfs cleanup
IB/ocrdma: fix incorrect fall-through on switch statement
IB/ipoib: Suppress the retry related completion errors
iw_cxgb4: remove the stid on listen create failure
iw_cxgb4: drop listen destroy replies if no ep found
...
|
|
Pull networking fixes from David Miller:
1) Fix NAPI poll list corruption in enic driver, from Christian
Lamparter.
2) Fix route use after free, from Eric Dumazet.
3) Fix regression in reuseaddr handling, from Josef Bacik.
4) Assert the size of control messages in compat handling since we copy
it in from userspace twice. From Meng Xu.
5) SMC layer bug fixes (missing RCU locking, bad refcounting, etc.)
from Ursula Braun.
6) Fix races in AF_PACKET fanout handling, from Willem de Bruijn.
7) Don't use ARRAY_SIZE on spinlock array which might have zero
entries, from Geert Uytterhoeven.
8) Fix miscomputation of checksum in ipv6 udp code, from Subash Abhinov
Kasiviswanathan.
9) Push the ipv6 header properly in ipv6 GRE tunnel driver, from Xin
Long.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits)
inet: fix improper empty comparison
net: use inet6_rcv_saddr to compare sockets
net: set tb->fast_sk_family
net: orphan frags on stand-alone ptype in dev_queue_xmit_nit
MAINTAINERS: update git tree locations for ieee802154 subsystem
net: prevent dst uses after free
net: phy: Fix truncation of large IRQ numbers in phy_attached_print()
net/smc: no close wait in case of process shut down
net/smc: introduce a delay
net/smc: terminate link group if out-of-sync is received
net/smc: longer delay for client link group removal
net/smc: adapt send request completion notification
net/smc: adjust net_device refcount
net/smc: take RCU read lock for routing cache lookup
net/smc: add receive timeout check
net/smc: add missing dev_put
net: stmmac: Cocci spatch "of_table"
lan78xx: Use default values loaded from EEPROM/OTP after reset
lan78xx: Allow EEPROM write for less than MAX_EEPROM_SIZE
lan78xx: Fix for eeprom read/write when device auto suspend
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor updates from John Johansen:
"This is the apparmor pull request, similar to SELinux and seccomp.
It's the same series that I was sent to James' security tree + one
regression fix that was found after the series was sent to James and
would have been sent for v4.14-rc2.
Features:
- in preparation for secid mapping add support for absolute root view
based labels
- add base infastructure for socket mediation
- add mount mediation
- add signal mediation
minor cleanups and changes:
- be defensive, ensure unconfined profiles have dfas initialized
- add more debug asserts to apparmorfs
- enable policy unpacking to audit different reasons for failure
- cleanup conditional check for label in label_print
- Redundant condition: prev_ns. in [label.c:1498]
Bug Fixes:
- fix regression in apparmorfs DAC access permissions
- fix build failure on sparc caused by undeclared signals
- fix sparse report of incorrect type assignment when freeing label proxies
- fix race condition in null profile creation
- Fix an error code in aafs_create()
- Fix logical error in verify_header()
- Fix shadowed local variable in unpack_trans_table()"
* tag 'apparmor-pr-2017-09-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: fix apparmorfs DAC access permissions
apparmor: fix build failure on sparc caused by undeclared signals
apparmor: fix incorrect type assignment when freeing proxies
apparmor: ensure unconfined profiles have dfas initialized
apparmor: fix race condition in null profile creation
apparmor: move new_null_profile to after profile lookup fns()
apparmor: add base infastructure for socket mediation
apparmor: add more debug asserts to apparmorfs
apparmor: make policy_unpack able to audit different info messages
apparmor: add support for absolute root view based labels
apparmor: cleanup conditional check for label in label_print
apparmor: add mount mediation
apparmor: add the ability to mediate signals
apparmor: Redundant condition: prev_ns. in [label.c:1498]
apparmor: Fix an error code in aafs_create()
apparmor: Fix logical error in verify_header()
apparmor: Fix shadowed local variable in unpack_trans_table()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix the initialization of resources in the ACPI WDAT watchdog
driver, a recent regression in the ACPI device properties handling, a
recent change in behavior causing the ACPI_HANDLE() macro to only work
for GPL code and create a MAINTAINERS entry for ACPI PMIC drivers in
order to specify the official reviewers for that code.
Specifics:
- Fix the initialization of resources in the ACPI WDAT watchdog
driver that uses unititialized memory which causes compiler
warnings to be triggered (Arnd Bergmann).
- Fix a recent regression in the ACPI device properties handling that
causes some device properties data to be skipped during enumeration
(Sakari Ailus).
- Fix a recent change in behavior that caused the ACPI_HANDLE() macro
to stop working for non-GPL code which is a problem for the NVidia
binary graphics driver, for example (John Hubbard).
- Add a MAINTAINERS entry for the ACPI PMIC drivers to specify the
official reviewers for that code (Rafael Wysocki)"
* tag 'acpi-4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: properties: Return _DSD hierarchical extension (data) sub-nodes correctly
ACPI / bus: Make ACPI_HANDLE() work for non-GPL code again
ACPI / watchdog: properly initialize resources
ACPI / PMIC: Add code reviewers to MAINTAINERS
|
|
Josef Bacik says:
====================
net: fix reuseaddr regression
I introduced a regression when reworking the fastreuse port stuff that allows
bind conflicts to occur once a reuseaddr successfully opens on an existing tb.
The root cause is I reversed an if statement which caused us to set the tb as if
there were no owners on the socket if there were, which obviously is not
correct.
Dave could you please queue these changes up for -stable, I've run them through
the net tests and added another test to check for this problem specifically.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When doing my reuseport rework I screwed up and changed a
if (hlist_empty(&tb->owners))
to
if (!hlist_empty(&tb->owners))
This is obviously bad as all of the reuseport/reuse logic was reversed,
which caused weird problems like allowing an ipv4 bind conflict if we
opened an ipv4 only socket on a port followed by an ipv6 only socket on
the same port.
Fixes: b9470c27607b ("inet: kill smallest_size and smallest_port")
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In ipv6_rcv_saddr_equal() we need to use inet6_rcv_saddr(sk) for the
ipv6 compare with the fast socket information to make sure we're doing
the proper comparisons.
Fixes: 637bc8bbe6c0 ("inet: reset tb->fastreuseport when adding a reuseport sk")
Reported-and-tested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need to set the tb->fast_sk_family properly so we can use the proper
comparison function for all subsequent reuseport bind requests.
Fixes: 637bc8bbe6c0 ("inet: reset tb->fastreuseport when adding a reuseport sk")
Reported-and-tested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Zerocopy skbs frags are copied when the skb is looped to a local sock.
Commit 1080e512d44d ("net: orphan frags on receive") introduced calls
to skb_orphan_frags to deliver_skb and __netif_receive_skb for this.
With msg_zerocopy, these skbs can also exist in the tx path and thus
loop from dev_queue_xmit_nit. This already calls deliver_skb in its
loop. But it does not orphan before a separate pt_prev->func().
Add the missing skb_orphan_frags_rx.
Changes
v1->v2: handle skb_orphan_frags_rx failure
Fixes: 1f8b977ab32d ("sock: enable MSG_ZEROCOPY")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a cpufreq regression introduced by recent changes related to
the generic DT driver, an initialization time memory leak in cpuidle
on ARM, a PM core bug that may cause system suspend/resume to fail on
some systems, a request type validation issue in the PM QoS framework
and two documentation-related issues.
Specifics:
- Fix a regression in cpufreq on systems using DT as the source of
CPU configuration information where two different code paths
attempt to create the cpufreq-dt device object (there can be only
one) and fix up the "compatible" matching for some TI platforms on
top of that (Viresh Kumar, Dave Gerlach).
- Fix an initialization time memory leak in cpuidle on ARM which
occurs if the cpuidle driver initialization fails (Stefan Wahren).
- Fix a PM core function that checks whether or not there are any
system suspend/resume callbacks for a device, but forgets to check
legacy callbacks which then may be skipped incorrectly and the
system may crash and/or the device may become unusable after a
suspend-resume cycle (Rafael Wysocki).
- Fix request type validation for latency tolerance PM QoS requests
which may lead to unexpected behavior (Jan Schönherr).
- Fix a broken link to PM documentation from a header file and a typo
in a PM document (Geert Uytterhoeven, Rafael Wysocki)"
* tag 'pm-4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: ti-cpufreq: Support additional am43xx platforms
ARM: cpuidle: Avoid memleak if init fail
cpufreq: dt-platdev: Add some missing platforms to the blacklist
PM: core: Fix device_pm_check_callbacks()
PM: docs: Drop an excess character from devices.rst
PM / QoS: Use the correct variable to check the QoS request type
driver core: Fix link to device power management documentation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- fixes for two long standing issues (lock up and a crash) in force
feedback handling in uinput driver
- tweak to firmware update timing in Elan I2C touchpad driver.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elan_i2c - extend Flash-Write delay
Input: uinput - avoid crash when sending FF request to device going away
Input: uinput - avoid FF flush when destroying device
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
"Major additions:
- sysctl and seccomp operation to discover available actions
(tyhicks)
- new per-filter configurable logging infrastructure and sysctl
(tyhicks)
- SECCOMP_RET_LOG to log allowed syscalls (tyhicks)
- SECCOMP_RET_KILL_PROCESS as the new strictest possible action
- self-tests for new behaviors"
[ This is the seccomp part of the security pull request during the merge
window that was nixed due to unrelated problems - Linus ]
* tag 'seccomp-v4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
samples: Unrename SECCOMP_RET_KILL
selftests/seccomp: Test thread vs process killing
seccomp: Implement SECCOMP_RET_KILL_PROCESS action
seccomp: Introduce SECCOMP_RET_KILL_PROCESS
seccomp: Rename SECCOMP_RET_KILL to SECCOMP_RET_KILL_THREAD
seccomp: Action to log before allowing
seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW
seccomp: Selftest for detection of filter flag support
seccomp: Sysctl to configure actions that are allowed to be logged
seccomp: Operation for checking if an action is available
seccomp: Sysctl to display available actions
seccomp: Provide matching filter for introspection
selftests/seccomp: Refactor RET_ERRNO tests
selftests/seccomp: Add simple seccomp overhead benchmark
selftests/seccomp: Add tests for basic ptrace actions
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Various SMB3 fixes for stable and security improvements from the
recently completed SMB3/Samba test events
* tag '4.14-smb3-fixes-from-recent-test-events-for-stable' of git://git.samba.org/sfrench/cifs-2.6:
SMB3: Don't ignore O_SYNC/O_DSYNC and O_DIRECT flags
SMB3: handle new statx fields
SMB: Validate negotiate (to protect against downgrade) even if signing off
cifs: release auth_key.response for reconnect.
cifs: release cifs root_cred after exit_cifs
CIFS: make arrays static const, reduces object code size
[SMB3] Update session and share information displayed for debugging SMB2/SMB3
cifs: show 'soft' in the mount options for hard mounts
SMB3: Warn user if trying to sign connection that authenticated as guest
SMB3: Fix endian warning
Fix SMB3.1.1 guest authentication to Samba
|
|
Pull ceph fixes from Ilya Dryomov:
"Two small but important fixes: RADOS semantic change in upcoming v12.2.1
release and a rare NULL dereference in create_session_open_msg()"
* tag 'ceph-for-4.14-rc2' of git://github.com/ceph/ceph-client:
ceph: avoid panic in create_session_open_msg() if utsname() returns NULL
libceph: don't allow bidirectional swap of pg-upmap-items
|
|
Patches for ieee802154 will go through my new trees towards netdev from
now on. The 6LoWPAN subsystem will stay as is (shared between ieee802154
and bluetooth) and go through the bluetooth tree as usual.
Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- fix endpoint "end of test" interrupt issue (introduced in v4.14-rc1)
(John Keeping)
- fix MIPS use-after-free map_irq() issue (introduced in v4.14-rc1)
(Lorenzo Pieralisi)
* tag 'pci-v4.14-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: endpoint: Use correct "end of test" interrupt
MIPS: PCI: Move map_irq() hooks out of initdata
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
- two Kconfig fixes to fix dependencies that cause compile failures
when they are not fulfilled.
- a section mismatch fix for Intel VT-d
- a fix for PCI topology detection in ARM device-tree code
* tag 'iommu-fixes-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/of: Remove PCI host bridge node check
iommu/qcom: Depend on HAS_DMA to fix compile error
iommu/vt-d: Fix harmless section mismatch warning
iommu: Add missing dependencies
|
|
Pull arch/tile fixes from Chris Metcalf:
"These are a code cleanup and config cleanup, respectively"
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
tile: array underflow in setup_maxnodemem()
tile: defconfig: Cleanup from old Kconfig options
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- #ifdef CONFIG_EFI around __efi_fpsimd_begin/end
- Assembly code alignment reduced to 4 bytes from 16
- Ensure the kernel is compiled for LP64 (there are some arm64
compilers around defaulting to ILP32)
- Fix arm_pmu_acpi memory leak on the error path
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
drivers/perf: arm_pmu_acpi: Release memory obtained by kasprintf
arm64: ensure the kernel is compiled for LP64
arm64: relax assembly code alignment from 16 byte to 4 byte
arm64: efi: Don't include EFI fpsimd save/restore code in non-EFI kernels
|
|
We weren't returning the creation time or the two easily supported
attributes (ENCRYPTED or COMPRESSED) for the getattr call to
allow statx to return these fields.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>\
Acked-by: Jeff Layton <jlayton@poochiereds.net>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
Some architectures define the no-op macros/functions copy_segments,
release_segments and forget_segments. These are used nowhere in the
tree, so removed them.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Vineet Gupta <vgupta@synopsys.com> [for arch/arc]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* acpi-pmic:
ACPI / PMIC: Add code reviewers to MAINTAINERS
* acpi-bus:
ACPI / bus: Make ACPI_HANDLE() work for non-GPL code again
* acpi-wdat:
ACPI / watchdog: properly initialize resources
* acpi-properties:
ACPI: properties: Return _DSD hierarchical extension (data) sub-nodes correctly
|
|
* pm-cpufreq:
cpufreq: ti-cpufreq: Support additional am43xx platforms
cpufreq: dt-platdev: Add some missing platforms to the blacklist
* pm-cpuidle:
ARM: cpuidle: Avoid memleak if init fail
|
|
* pm-core:
PM: core: Fix device_pm_check_callbacks()
* pm-qos:
PM / QoS: Use the correct variable to check the QoS request type
* pm-docs:
PM: docs: Drop an excess character from devices.rst
driver core: Fix link to device power management documentation
|
|
The DAC access permissions for several apparmorfs files are wrong.
.access - needs to be writable by all tasks to perform queries
the others in the set only provide a read fn so should be read only.
With policy namespace virtualization all apparmor needs to control
the permission and visibility checks directly which means DAC
access has to be allowed for all user, group, and other.
BugLink: http://bugs.launchpad.net/bugs/1713103
Fixes: c97204baf840b ("apparmor: rename apparmor file fns and data to indicate use")
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
In file included from security/apparmor/ipc.c:23:0:
security/apparmor/include/sig_names.h:26:3: error: 'SIGSTKFLT' undeclared here (not in a function)
[SIGSTKFLT] = 16, /* -, 16, - */
^
security/apparmor/include/sig_names.h:26:3: error: array index in initializer not of integer type
security/apparmor/include/sig_names.h:26:3: note: (near initialization for 'sig_map')
security/apparmor/include/sig_names.h:51:3: error: 'SIGUNUSED' undeclared here (not in a function)
[SIGUNUSED] = 34, /* -, 31, - */
^
security/apparmor/include/sig_names.h:51:3: error: array index in initializer not of integer type
security/apparmor/include/sig_names.h:51:3: note: (near initialization for 'sig_map')
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: c6bf1adaecaa ("apparmor: add the ability to mediate signals")
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
sparse reports
poisoning the proxy->label before freeing the struct is resulting in
a sparse build warning.
../security/apparmor/label.c:52:30: warning: incorrect type in assignment (different address spaces)
../security/apparmor/label.c:52:30: expected struct aa_label [noderef] <asn:4>*label
../security/apparmor/label.c:52:30: got struct aa_label *<noident>
fix with RCU_INIT_POINTER as this is one of those cases where
rcu_assign_pointer() is not needed.
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
Generally unconfined has early bailout tests and does not need the
dfas initialized, however if an early bailout test is ever missed
it will result in an oops.
Be defensive and initialize the unconfined profile to have null dfas
(no permission) so if an early bailout test is missed we fail
closed (no perms granted) instead of oopsing.
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
There is a race when null- profile is being created between the
initial lookup/creation of the profile and lock/addition of the
profile. This could result in multiple version of a profile being
added to the list which need to be removed/replaced.
Since these are learning profile their is no affect on mediation.
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
new_null_profile will need to use some of the profile lookup fns()
so move instead of doing forward fn declarations.
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
Provide a basic mediation of sockets. This is not a full net mediation
but just whether a spcific family of socket can be used by an
application, along with setting up some basic infrastructure for
network mediation to follow.
the user space rule hav the basic form of
NETWORK RULE = [ QUALIFIERS ] 'network' [ DOMAIN ]
[ TYPE | PROTOCOL ]
DOMAIN = ( 'inet' | 'ax25' | 'ipx' | 'appletalk' | 'netrom' |
'bridge' | 'atmpvc' | 'x25' | 'inet6' | 'rose' |
'netbeui' | 'security' | 'key' | 'packet' | 'ash' |
'econet' | 'atmsvc' | 'sna' | 'irda' | 'pppox' |
'wanpipe' | 'bluetooth' | 'netlink' | 'unix' | 'rds' |
'llc' | 'can' | 'tipc' | 'iucv' | 'rxrpc' | 'isdn' |
'phonet' | 'ieee802154' | 'caif' | 'alg' | 'nfc' |
'vsock' | 'mpls' | 'ib' | 'kcm' ) ','
TYPE = ( 'stream' | 'dgram' | 'seqpacket' | 'rdm' | 'raw' |
'packet' )
PROTOCOL = ( 'tcp' | 'udp' | 'icmp' )
eg.
network,
network inet,
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
|
|
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
|
|
Switch unpack auditing to using the generic name field in the audit
struct and make it so we can start adding new info messages about
why an unpack failed.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
|
|
With apparmor policy virtualization based on policy namespace View's
we don't generally want/need absolute root based views, however there
are cases like debugging and some secid based conversions where
using a root based view is important.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
|
|
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
|
|
Add basic mount mediation. That allows controlling based on basic
mount parameters. It does not include special mount parameters for
apparmor, super block labeling, or any triggers for apparmor namespace
parameter modifications on pivot root.
default userspace policy rules have the form of
MOUNT RULE = ( MOUNT | REMOUNT | UMOUNT )
MOUNT = [ QUALIFIERS ] 'mount' [ MOUNT CONDITIONS ] [ SOURCE FILEGLOB ]
[ '->' MOUNTPOINT FILEGLOB ]
REMOUNT = [ QUALIFIERS ] 'remount' [ MOUNT CONDITIONS ]
MOUNTPOINT FILEGLOB
UMOUNT = [ QUALIFIERS ] 'umount' [ MOUNT CONDITIONS ] MOUNTPOINT FILEGLOB
MOUNT CONDITIONS = [ ( 'fstype' | 'vfstype' ) ( '=' | 'in' )
MOUNT FSTYPE EXPRESSION ]
[ 'options' ( '=' | 'in' ) MOUNT FLAGS EXPRESSION ]
MOUNT FSTYPE EXPRESSION = ( MOUNT FSTYPE LIST | MOUNT EXPRESSION )
MOUNT FSTYPE LIST = Comma separated list of valid filesystem and
virtual filesystem types (eg ext4, debugfs, etc)
MOUNT FLAGS EXPRESSION = ( MOUNT FLAGS LIST | MOUNT EXPRESSION )
MOUNT FLAGS LIST = Comma separated list of MOUNT FLAGS.
MOUNT FLAGS = ( 'ro' | 'rw' | 'nosuid' | 'suid' | 'nodev' | 'dev' |
'noexec' | 'exec' | 'sync' | 'async' | 'remount' |
'mand' | 'nomand' | 'dirsync' | 'noatime' | 'atime' |
'nodiratime' | 'diratime' | 'bind' | 'rbind' | 'move' |
'verbose' | 'silent' | 'loud' | 'acl' | 'noacl' |
'unbindable' | 'runbindable' | 'private' | 'rprivate' |
'slave' | 'rslave' | 'shared' | 'rshared' |
'relatime' | 'norelatime' | 'iversion' | 'noiversion' |
'strictatime' | 'nouser' | 'user' )
MOUNT EXPRESSION = ( ALPHANUMERIC | AARE ) ...
PIVOT ROOT RULE = [ QUALIFIERS ] pivot_root [ oldroot=OLD PUT FILEGLOB ]
[ NEW ROOT FILEGLOB ]
SOURCE FILEGLOB = FILEGLOB
MOUNTPOINT FILEGLOB = FILEGLOB
eg.
mount,
mount /dev/foo,
mount options=ro /dev/foo -> /mnt/,
mount options in (ro,atime) /dev/foo -> /mnt/,
mount options=ro options=atime,
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
|
|
Add signal mediation where the signal can be mediated based on the
signal, direction, or the label or the peer/target. The signal perms
are verified on a cross check to ensure policy consistency in the case
of incremental policy load/replacement.
The optimization of skipping the cross check when policy is guaranteed
to be consistent (single compile unit) remains to be done.
policy rules have the form of
SIGNAL_RULE = [ QUALIFIERS ] 'signal' [ SIGNAL ACCESS PERMISSIONS ]
[ SIGNAL SET ] [ SIGNAL PEER ]
SIGNAL ACCESS PERMISSIONS = SIGNAL ACCESS | SIGNAL ACCESS LIST
SIGNAL ACCESS LIST = '(' Comma or space separated list of SIGNAL
ACCESS ')'
SIGNAL ACCESS = ( 'r' | 'w' | 'rw' | 'read' | 'write' | 'send' |
'receive' )
SIGNAL SET = 'set' '=' '(' SIGNAL LIST ')'
SIGNAL LIST = Comma or space separated list of SIGNALS
SIGNALS = ( 'hup' | 'int' | 'quit' | 'ill' | 'trap' | 'abrt' |
'bus' | 'fpe' | 'kill' | 'usr1' | 'segv' | 'usr2' |
'pipe' | 'alrm' | 'term' | 'stkflt' | 'chld' | 'cont' |
'stop' | 'stp' | 'ttin' | 'ttou' | 'urg' | 'xcpu' |
'xfsz' | 'vtalrm' | 'prof' | 'winch' | 'io' | 'pwr' |
'sys' | 'emt' | 'exists' | 'rtmin+0' ... 'rtmin+32'
)
SIGNAL PEER = 'peer' '=' AARE
eg.
signal, # allow all signals
signal send set=(hup, kill) peer=foo,
Signed-off-by: John Johansen <john.johansen@canonical.com>
Acked-by: Seth Arnold <seth.arnold@canonical.com>
|
|
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
We accidentally forgot to set the error code on this path. It means we
return NULL instead of an error pointer. I looked through a bunch of
callers and I don't think it really causes a big issue, but the
documentation says we're supposed to return error pointers here.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
verify_header() is currently checking whether interface version is less
than 5 *and* greater than 7, which always evaluates to false. Instead it
should check whether it is less than 5 *or* greater than 7.
Signed-off-by: Christos Gkekas <chris.gekas@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
with W=2:
security/apparmor/policy_unpack.c: In function ‘unpack_trans_table’:
security/apparmor/policy_unpack.c:469: warning: declaration of ‘pos’ shadows a previous local
security/apparmor/policy_unpack.c:451: warning: shadowed declaration is here
Rename the old "pos" to "saved_pos" to fix this.
Fixes: 5379a3312024a8be ("apparmor: support v7 transition format compatible with label_parse")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
destroyed
FW needs the 0th GID Entry in the Table to be preserved before
it's corresponding QP1 is deleted, else it will fail the cmd.
Check for the same and return to prevent error msg being logged for
cmd failure.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch fixes a memory leak issue when alloc_mr is used.
mr->pages and mr->npages are used only in alloc_mr path. mr->pages
is allocated when alloc_mr is called or in the case of FRMR, while
creating the MR. mr->npages is updated only when the MR created
is used i.e. after invoking map_mr_sg verb, before data transfer.
In the dereg_mr path, if mr->npages is 0, driver ends up not freeing
the memory created.
Removing the npages check from the dereg_mr path for kernel consumers.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
When there is a NETDEV_UNREGISTER event, bnxt_re driver calls
ib_unregister_device() (RTNL lock held).
ib_unregister_device attempts to flush a worker queue scheduled by
ib_core and that queue might have a pending ib_query_port().
ib_query_port in turn calls bnxt_re_query_port(), which while querying the
link speed using ib_get_eth_speed(), tries to acquire the rtnl_lock() which
was already held by NETDEV_UNREGISTER.
Fixing the issue by removing the link speed query from bnxt_re_query_port()
Now the speed is queried post a successful ib_register_device or whenever
there is a NETDEV_CHANGE event.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Upon receipt of the NETDEV_REGISTER event from the netdev notifier chain,
the IB stack registration is spawned off to a workqueue since that also
requires an rtnl lock.
There could be 2 kinds of races between the NETDEV_REGISTER and the
NETDEV_UNREGISTER event handling.
a)The NETDEV_UNREGISTER event is received in rapid succession after
the NETDEV_REGISTER event even before the work queue got a chance to run.
b)The NETDEV_UNREGISTER event is received while the workqueue that handles
registration with the IB stack is still in progress.
Handle both the races with a bit flag that is set just before the work item
is queued and cleared in the workqueue after the event is handled just
before the workqueue item is freed.
While adding the new flag, it was noted that the flags are all used in
*_bit() operations which expect a bit number and not a literal constant
with a bit set. So change the numbers to be bit numbers.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Clean up all devices added to the bnxt_re_dev_list in the
module_exit entry point.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Driver must assign the user supplied compare/swap values in
the wqe to successfully complete the atomic compare and
swap operation.
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Once a cmd to FW times out(after 20s) it is reasonable to
assume the FW or atleast the control path is dead.
No point issuing further cmds to the FW as each subsequent cmd
with another 20s timeout will cascade resulting in unnecessary
traces and/or NMI Lockups.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The MTU value in the qplib_qp.mtu should be
consistent with whatever mtu was set during
INIT to RTR.The Next PSN and number of packets
are calculated based on this member in the qplib_qp structure.
Signed-off-by: Narender Reddy <narender.reddy@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|