summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-09-30bridge: re-introduce 'fix parsing of MLDv2 reports'Davide Caratti
[ Upstream commit 9264251ee2a55bce8fb93826b3f581fb9eb7e2c2 ] commit bc8c20acaea1 ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave") seems to have accidentally reverted commit 47cc84ce0c2f ("bridge: fix parsing of MLDv2 reports"). This commit brings back a change to br_ip6_multicast_mld2_report() where parsing of MLDv2 reports stops when the first group is successfully added to the MDB cache. Fixes: bc8c20acaea1 ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30net: smc91x: fix SMC accessesRussell King
[ Upstream commit 2fb04fdf30192ff1e2b5834e9b7745889ea8bbcb ] Commit b70661c70830 ("net: smc91x: use run-time configuration on all ARM machines") broke some ARM platforms through several mistakes. Firstly, the access size must correspond to the following rule: (a) at least one of 16-bit or 8-bit access size must be supported (b) 32-bit accesses are optional, and may be enabled in addition to the above. Secondly, it provides no emulation of 16-bit accesses, instead blindly making 16-bit accesses even when the platform specifies that only 8-bit is supported. Reorganise smc91x.h so we can make use of the existing 16-bit access emulation already provided - if 16-bit accesses are supported, use 16-bit accesses directly, otherwise if 8-bit accesses are supported, use the provided 16-bit access emulation. If neither, BUG(). This exactly reflects the driver behaviour prior to the commit being fixed. Since the conversion incorrectly cut down the available access sizes on several platforms, we also need to go through every platform and fix up the overly-restrictive access size: Arnd assumed that if a platform can perform 32-bit, 16-bit and 8-bit accesses, then only a 32-bit access size needed to be specified - not so, all available access sizes must be specified. This likely fixes some performance regressions in doing this: if a platform does not support 8-bit accesses, 8-bit accesses have been emulated by performing a 16-bit read-modify-write access. Tested on the Intel Assabet/Neponset platform, which supports only 8-bit accesses, which was broken by the original commit. Fixes: b70661c70830 ("net: smc91x: use run-time configuration on all ARM machines") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30Revert "phy: IRQ cannot be shared"Xander Huff
[ Upstream commit c3e70edd7c2eed6acd234627a6007627f5c76e8e ] This reverts: commit 33c133cc7598 ("phy: IRQ cannot be shared") On hardware with multiple PHY devices hooked up to the same IRQ line, allow them to share it. Sergei Shtylyov says: "I'm not sure now what was the reason I concluded that the IRQ sharing was impossible... most probably I thought that the kernel IRQ handling code exited the loop over the IRQ actions once IRQ_HANDLED was returned -- which is obviously not so in reality..." Signed-off-by: Xander Huff <xander.huff@ni.com> Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30net: dsa: bcm_sf2: Fix race condition while unmasking interruptsFlorian Fainelli
[ Upstream commit 4f101c47791cdcb831b3ef1f831b1cc51e4fe03c ] We kept shadow copies of which interrupt sources we have enabled and disabled, but due to an order bug in how intrl2_mask_clear was defined, we could run into the following scenario: CPU0 CPU1 intrl2_1_mask_clear(..) sets INTRL2_CPU_MASK_CLEAR bcm_sf2_switch_1_isr read INTRL2_CPU_STATUS and masks with stale irq1_mask value updates irq1_mask value Which would make us loop again and again trying to process and interrupt we are not clearing since our copy of whether it was enabled before still indicates it was not. Fix this by updating the shadow copy first, and then unasking at the HW level. Fixes: 246d7f773c13 ("net: dsa: add Broadcom SF2 switch driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30net/mlx5: Added missing check of msg length in verifying its signaturePaul Blakey
[ Upstream commit 2c0f8ce1b584a4d7b8ff53140d21dfed99834940 ] Set and verify signature calculates the signature for each of the mailbox nodes, even for those that are unused (from cache). Added a missing length check to set and verify only those which are used. While here, also moved the setting of msg's nodes token to where we already go over them. This saves a pass because checksum is disabled, and the only useful thing remaining that set signature does is setting the token. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30tipc: fix NULL pointer dereference in shutdown()Vegard Nossum
[ Upstream commit d2fbdf76b85bcdfe57b8ef2ba09d20e8ada79abd ] tipc_msg_create() can return a NULL skb and if so, we shouldn't try to call tipc_node_xmit_skb() on it. general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 3 PID: 30298 Comm: trinity-c0 Not tainted 4.7.0-rc7+ #19 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff8800baf09980 ti: ffff8800595b8000 task.ti: ffff8800595b8000 RIP: 0010:[<ffffffff830bb46b>] [<ffffffff830bb46b>] tipc_node_xmit_skb+0x6b/0x140 RSP: 0018:ffff8800595bfce8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000003023b0e0 RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffffffff83d12580 RBP: ffff8800595bfd78 R08: ffffed000b2b7f32 R09: 0000000000000000 R10: fffffbfff0759725 R11: 0000000000000000 R12: 1ffff1000b2b7f9f R13: ffff8800595bfd58 R14: ffffffff83d12580 R15: dffffc0000000000 FS: 00007fcdde242700(0000) GS:ffff88011af80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcddde1db10 CR3: 000000006874b000 CR4: 00000000000006e0 DR0: 00007fcdde248000 DR1: 00007fcddd73d000 DR2: 00007fcdde248000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000090602 Stack: 0000000000000018 0000000000000018 0000000041b58ab3 ffffffff83954208 ffffffff830bb400 ffff8800595bfd30 ffffffff8309d767 0000000000000018 0000000000000018 ffff8800595bfd78 ffffffff8309da1a 00000000810ee611 Call Trace: [<ffffffff830c84a3>] tipc_shutdown+0x553/0x880 [<ffffffff825b4a3b>] SyS_shutdown+0x14b/0x170 [<ffffffff8100334c>] do_syscall_64+0x19c/0x410 [<ffffffff83295ca5>] entry_SYSCALL64_slow_path+0x25/0x25 Code: 90 00 b4 0b 83 c7 00 f1 f1 f1 f1 4c 8d 6d e0 c7 40 04 00 00 00 f4 c7 40 08 f3 f3 f3 f3 48 89 d8 48 c1 e8 03 c7 45 b4 00 00 00 00 <80> 3c 30 00 75 78 48 8d 7b 08 49 8d 75 c0 48 b8 00 00 00 00 00 RIP [<ffffffff830bb46b>] tipc_node_xmit_skb+0x6b/0x140 RSP <ffff8800595bfce8> ---[ end trace 57b0484e351e71f1 ]--- I feel like we should maybe return -ENOMEM or -ENOBUFS, but I'm not sure userspace is equipped to handle that. Anyway, this is better than a GPF and looks somewhat consistent with other tipc_msg_create() callers. Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30net/irda: handle iriap_register_lsap() allocation failureVegard Nossum
[ Upstream commit 5ba092efc7ddff040777ae7162f1d195f513571b ] If iriap_register_lsap() fails to allocate memory, self->lsap is set to NULL. However, none of the callers handle the failure and irlmp_connect_request() will happily dereference it: iriap_register_lsap: Unable to allocated LSAP! ================================================================================ UBSAN: Undefined behaviour in net/irda/irlmp.c:378:2 member access within null pointer of type 'struct lsap_cb' CPU: 1 PID: 15403 Comm: trinity-c0 Not tainted 4.8.0-rc1+ #81 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 0000000000000000 ffff88010c7e78a8 ffffffff82344f40 0000000041b58ab3 ffffffff84f98000 ffffffff82344e94 ffff88010c7e78d0 ffff88010c7e7880 ffff88010630ad00 ffffffff84a5fae0 ffffffff84d3f5c0 000000000000017a Call Trace: [<ffffffff82344f40>] dump_stack+0xac/0xfc [<ffffffff8242f5a8>] ubsan_epilogue+0xd/0x8a [<ffffffff824302bf>] __ubsan_handle_type_mismatch+0x157/0x411 [<ffffffff83b7bdbc>] irlmp_connect_request+0x7ac/0x970 [<ffffffff83b77cc0>] iriap_connect_request+0xa0/0x160 [<ffffffff83b77f48>] state_s_disconnect+0x88/0xd0 [<ffffffff83b78904>] iriap_do_client_event+0x94/0x120 [<ffffffff83b77710>] iriap_getvaluebyclass_request+0x3e0/0x6d0 [<ffffffff83ba6ebb>] irda_find_lsap_sel+0x1eb/0x630 [<ffffffff83ba90c8>] irda_connect+0x828/0x12d0 [<ffffffff833c0dfb>] SYSC_connect+0x22b/0x340 [<ffffffff833c7e09>] SyS_connect+0x9/0x10 [<ffffffff81007bd3>] do_syscall_64+0x1b3/0x4b0 [<ffffffff845f946a>] entry_SYSCALL64_slow_path+0x25/0x25 ================================================================================ The bug seems to have been around since forever. There's more problems with missing error checks in iriap_init() (and indeed all of irda_init()), but that's a bigger problem that needs very careful review and testing. This patch will fix the most serious bug (as it's easily reached from unprivileged userspace). I have tested my patch with a reproducer. Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30vti: flush x-netns xfrm cache when vti interface is removedLance Richardson
[ Upstream commit a5d0dc810abf3d6b241777467ee1d6efb02575fc ] When executing the script included below, the netns delete operation hangs with the following message (repeated at 10 second intervals): kernel:unregister_netdevice: waiting for lo to become free. Usage count = 1 This occurs because a reference to the lo interface in the "secure" netns is still held by a dst entry in the xfrm bundle cache in the init netns. Address this problem by garbage collecting the tunnel netns flow cache when a cross-namespace vti interface receives a NETDEV_DOWN notification. A more detailed description of the problem scenario (referencing commands in the script below): (1) ip link add vti_test type vti local 1.1.1.1 remote 1.1.1.2 key 1 The vti_test interface is created in the init namespace. vti_tunnel_init() attaches a struct ip_tunnel to the vti interface's netdev_priv(dev), setting the tunnel net to &init_net. (2) ip link set vti_test netns secure The vti_test interface is moved to the "secure" netns. Note that the associated struct ip_tunnel still has tunnel->net set to &init_net. (3) ip netns exec secure ping -c 4 -i 0.02 -I 192.168.100.1 192.168.200.1 The first packet sent using the vti device causes xfrm_lookup() to be called as follows: dst = xfrm_lookup(tunnel->net, skb_dst(skb), fl, NULL, 0); Note that tunnel->net is the init namespace, while skb_dst(skb) references the vti_test interface in the "secure" namespace. The returned dst references an interface in the init namespace. Also note that the first parameter to xfrm_lookup() determines which flow cache is used to store the computed xfrm bundle, so after xfrm_lookup() returns there will be a cached bundle in the init namespace flow cache with a dst referencing a device in the "secure" namespace. (4) ip netns del secure Kernel begins to delete the "secure" namespace. At some point the vti_test interface is deleted, at which point dst_ifdown() changes the dst->dev in the cached xfrm bundle flow from vti_test to lo (still in the "secure" namespace however). Since nothing has happened to cause the init namespace's flow cache to be garbage collected, this dst remains attached to the flow cache, so the kernel loops waiting for the last reference to lo to go away. <Begin script> ip link add br1 type bridge ip link set dev br1 up ip addr add dev br1 1.1.1.1/8 ip netns add secure ip link add vti_test type vti local 1.1.1.1 remote 1.1.1.2 key 1 ip link set vti_test netns secure ip netns exec secure ip link set vti_test up ip netns exec secure ip link s lo up ip netns exec secure ip addr add dev lo 192.168.100.1/24 ip netns exec secure ip route add 192.168.200.0/24 dev vti_test ip xfrm policy flush ip xfrm state flush ip xfrm policy add dir out tmpl src 1.1.1.1 dst 1.1.1.2 \ proto esp mode tunnel mark 1 ip xfrm policy add dir in tmpl src 1.1.1.2 dst 1.1.1.1 \ proto esp mode tunnel mark 1 ip xfrm state add src 1.1.1.1 dst 1.1.1.2 proto esp spi 1 \ mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788 ip xfrm state add src 1.1.1.2 dst 1.1.1.1 proto esp spi 1 \ mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788 ip netns exec secure ping -c 4 -i 0.02 -I 192.168.100.1 192.168.200.1 ip netns del secure <End script> Reported-by: Hangbin Liu <haliu@redhat.com> Reported-by: Jan Tluka <jtluka@redhat.com> Signed-off-by: Lance Richardson <lrichard@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30af_unix: split 'u->readlock' into two: 'iolock' and 'bindlock'Linus Torvalds
commit 6e1ce3c3451291142a57c4f3f6f999a29fb5b3bc upstream. Right now we use the 'readlock' both for protecting some of the af_unix IO path and for making the bind be single-threaded. The two are independent, but using the same lock makes for a nasty deadlock due to ordering with regards to filesystem locking. The bind locking would want to nest outside the VSF pathname locking, but the IO locking wants to nest inside some of those same locks. We tried to fix this earlier with commit c845acb324aa ("af_unix: Fix splice-bind deadlock") which moved the readlock inside the vfs locks, but that caused problems with overlayfs that will then call back into filesystem routines that take the lock in the wrong order anyway. Splitting the locks means that we can go back to having the bind lock be the outermost lock, and we don't have any deadlocks with lock ordering. Acked-by: Rainer Weikusat <rweikusat@cyberadapt.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30Revert "af_unix: Fix splice-bind deadlock"Linus Torvalds
commit 38f7bd94a97b542de86a2be9229289717e33a7a4 upstream. This reverts commit c845acb324aa85a39650a14e7696982ceea75dc1. It turns out that it just replaces one deadlock with another one: we can still get the wrong lock ordering with the readlock due to overlayfs calling back into the filesystem layer and still taking the vfs locks after the readlock. The proper solution ends up being to just split the readlock into two pieces: the bind lock (taken *outside* the vfs locks) and the IO lock (taken *inside* the filesystem locks). The two locks are independent anyway. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30bonding: Fix bonding crashMahesh Bandewar
[ Upstream commit 24b27fc4cdf9e10c5e79e5923b6b7c2c5c95096c ] Following few steps will crash kernel - (a) Create bonding master > modprobe bonding miimon=50 (b) Create macvlan bridge on eth2 > ip link add link eth2 dev mvl0 address aa:0:0:0:0:01 \ type macvlan (c) Now try adding eth2 into the bond > echo +eth2 > /sys/class/net/bond0/bonding/slaves <crash> Bonding does lots of things before checking if the device enslaved is busy or not. In this case when the notifier call-chain sends notifications, the bond_netdev_event() assumes that the rx_handler /rx_handler_data is registered while the bond_enslave() hasn't progressed far enough to register rx_handler for the new slave. This patch adds a rx_handler check that can be performed right at the beginning of the enslave code to avoid getting into this situation. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30megaraid: fix null pointer check in megasas_detach_one().Maurizio Lombardi
commit 546e559c79b1a8d27c23262907a00fc209e392a0 upstream. The pd_seq_sync pointer can't be NULL, we have to check its entries instead. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30nouveau: fix nv40_perfctr_next() cleanup regressionArnd Bergmann
commit 86d65b7e7a0c927d07d18605c276d0f142438ead upstream. gcc-6 warns about code in the nouveau driver that is obviously silly: drivers/gpu/drm/nouveau/nvkm/engine/pm/nv40.c: In function 'nv40_perfctr_next': drivers/gpu/drm/nouveau/nvkm/engine/pm/nv40.c:62:19: warning: self-comparison always evaluats to false [-Wtautological-compare] if (pm->sequence != pm->sequence) { The behavior was accidentally introduced in a patch described as "This is purely preparation for upcoming commits, there should be no code changes here.". As far as I can tell, that was true for the rest of that patch except for this one function, which has been changed to a NOP. This patch restores the original behavior. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 8c1aeaa13954 ("drm/nouveau/pm: cosmetic changes") Reviewed-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30Staging: iio: adc: fix indent on break statementColin Ian King
commit b6acb0cfc21293a1bfc283e9217f58f7474ef728 upstream. Fix indent warning when building with gcc 6: drivers/staging/iio/adc/ad7192.c:239:4: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30iwlegacy: avoid warning about missing bracesArnd Bergmann
commit 2cce76c3fab410520610a7d2f52faebc3cfcf843 upstream. gcc-6 warns about code in il3945_hw_txq_ctx_free() being somewhat ambiguous: drivers/net/wireless/intel/iwlegacy/3945.c:1022:5: warning: suggest explicit braces to avoid ambiguous 'else' [-Wparentheses] This adds a set of curly braces to avoid the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30ath9k: fix misleading indentationArnd Bergmann
commit 362210e0dff4eb7bb36a9b34dbef3b39d779d95e upstream. A cleanup patch in linux-3.18 moved around some code in the ath9k driver and left some code to be indented in a misleading way, made worse by the addition of some new code for p2p mode, as discovered by a new gcc-6 warning: drivers/net/wireless/ath/ath9k/init.c: In function 'ath9k_set_hw_capab': drivers/net/wireless/ath/ath9k/init.c:851:4: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation] hw->wiphy->iface_combinations = if_comb; ^~ drivers/net/wireless/ath/ath9k/init.c:847:3: note: ...this 'if' clause, but it is not if (ath9k_is_chanctx_enabled()) ^~ The code is in fact correct, but the indentation is not, so I'm reformatting it as it should have been after the original cleanup. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 499afaccf6f3 ("ath9k: Isolate ath9k_use_chanctx module parameter") Fixes: eb61f9f623f7 ("ath9k: advertise p2p dev support when chanctx") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30am437x-vfpe: fix typo in vpfe_get_app_input_indexArnd Bergmann
commit 0fb504001192c1df62c847a8bb6558753c36ebef upstream. gcc-6 points out an obviously silly comparison in vpfe_get_app_input_index(): drivers/media/platform/am437x/am437x-vpfe.c: In function 'vpfe_get_app_input_index': drivers/media/platform/am437x/am437x-vpfe.c:1709:27: warning: self-comparison always evaluats to true [-Wtautological-compare] client->adapter->nr == client->adapter->nr) { ^~ This was introduced in a slighly incorrect conversion, and it's clear that the comparison was meant to compare the iterator to the current subdev instead, as we do in the line above. Fixes: d37232390fd4 ("[media] media: am437x-vpfe: match the OF node/i2c addr instead of name") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30Add braces to avoid "ambiguous ‘else’" compiler warningsLinus Torvalds
commit 194dc870a5890e855ecffb30f3b80ba7c88f96d6 upstream. Some of our "for_each_xyz()" macro constructs make gcc unhappy about lack of braces around if-statements inside or outside the loop, because the loop construct itself has a "if-then-else" statement inside of it. The resulting warnings look something like this: drivers/gpu/drm/i915/i915_debugfs.c: In function ‘i915_dump_lrc’: drivers/gpu/drm/i915/i915_debugfs.c:2103:6: warning: suggest explicit braces to avoid ambiguous ‘else’ [-Wparentheses] if (ctx != dev_priv->kernel_context) ^ even if the code itself is fine. Since the warning is fairly easy to avoid by adding a braces around the if-statement near the for_each_xyz() construct, do so, rather than disabling the otherwise potentially useful warning. (The if-then-else statements used in the "for_each_xyz()" constructs are designed to be inherently safe even with no braces, but in this case it's quite understandable that gcc isn't really able to tell that). This finally leaves the standard "allmodconfig" build with just a handful of remaining warnings, so new and valid warnings hopefully will stand out. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30net: caif: fix misleading indentationArnd Bergmann
commit 8e0cc8c326d99e41468c96fea9785ab78883a281 upstream. gcc points out code that is not indented the way it is interpreted: net/caif/cfpkt_skbuff.c: In function 'cfpkt_setlen': net/caif/cfpkt_skbuff.c:289:4: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation] return cfpkt_getlen(pkt); ^~~~~~ net/caif/cfpkt_skbuff.c:286:3: note: ...this 'else' clause, but it is not else ^~~~ It is clear from the context that not returning here would be a bug, as we'd end up passing a negative length into a function that takes a u16 length, so it is not missing curly braces here, and I'm assuming that the indentation is the only part that's wrong about it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30Makefile: Mute warning for __builtin_return_address(>0) for tracing onlySteven Rostedt
commit 377ccbb483738f84400ddf5840c7dd8825716985 upstream. With the latest gcc compilers, they give a warning if __builtin_return_address() parameter is greater than 0. That is because if it is used by a function called by a top level function (or in the case of the kernel, by assembly), it can try to access stack frames outside the stack and crash the system. The tracing system uses __builtin_return_address() of up to 2! But it is well aware of the dangers that it may have, and has even added precautions to protect against it (see the thunk code in arch/x86/entry/thunk*.S) Linus originally added KBUILD_CFLAGS that would suppress the warning for the entire kernel, as simply adding KBUILD_CFLAGS to the tracing directory wouldn't work. The tracing directory plays a bit with the CFLAGS and requires a little more logic. This adds that special logic to only suppress the warning for the tracing directory. If it is used anywhere else outside of tracing, the warning will still be triggered. Link: http://lkml.kernel.org/r/20160728223043.51996267@grimm.local.home Tested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30Disable "frame-address" warningLinus Torvalds
commit 124a3d88fa20e1869fc229d7d8c740cc81944264 upstream. Newer versions of gcc warn about the use of __builtin_return_address() with a non-zero argument when "-Wall" is specified: kernel/trace/trace_irqsoff.c: In function ‘stop_critical_timings’: kernel/trace/trace_irqsoff.c:433:86: warning: calling ‘__builtin_return_address’ with a nonzero argument is unsafe [-Wframe-address] stop_critical_timing(CALLER_ADDR0, CALLER_ADDR1); [ .. repeats a few times for other similar cases .. ] It is true that a non-zero argument is somewhat dangerous, and we do not actually have very many uses of that in the kernel - but the ftrace code does use it, and as Stephen Rostedt says: "We are well aware of the danger of using __builtin_return_address() of > 0. In fact that's part of the reason for having the "thunk" code in x86 (See arch/x86/entry/thunk_{64,32}.S). [..] it adds extra frames when tracking irqs off sections, to prevent __builtin_return_address() from accessing bad areas. In fact the thunk_32.S states: 'Trampoline to trace irqs off. (otherwise CALLER_ADDR1 might crash)'." For now, __builtin_return_address() with a non-zero argument is the best we can do, and the warning is not helpful and can end up making people miss other warnings for real problems. So disable the frame-address warning on compilers that need it. Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30Disable "maybe-uninitialized" warning globallyLinus Torvalds
commit 6e8d666e925333c55378e8d5540a8a9ee0eea9c5 upstream. Several build configurations had already disabled this warning because it generates a lot of false positives. But some had not, and it was still enabled for "allmodconfig" builds, for example. Looking at the warnings produced, every single one I looked at was a false positive, and the warnings are frequent enough (and big enough) that they can easily hide real problems that you don't notice in the noise generated by -Wmaybe-uninitialized. The warning is good in theory, but this is a classic case of a warning that causes more problems than the warning can solve. If gcc gets better at avoiding false positives, we may be able to re-enable this warning. But as is, we're better off without it, and I want to be able to see the *real* warnings. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30gcov: disable -Wmaybe-uninitialized warningArnd Bergmann
commit e72e2dfe7c16ffbfbabf9cb24adc6d9f93a4fe37 upstream. When gcov profiling is enabled, we see a lot of spurious warnings about possibly uninitialized variables being used: arch/arm/mm/dma-mapping.c: In function 'arm_coherent_iommu_map_page': arch/arm/mm/dma-mapping.c:1085:16: warning: 'start' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/clk/st/clk-flexgen.c: In function 'st_of_flexgen_setup': drivers/clk/st/clk-flexgen.c:323:9: warning: 'num_parents' may be used uninitialized in this function [-Wmaybe-uninitialized] kernel/cgroup.c: In function 'cgroup_mount': kernel/cgroup.c:2119:11: warning: 'root' may be used uninitialized in this function [-Wmaybe-uninitialized] All of these are false positives, so it seems better to just disable the warnings whenever GCOV is enabled. Most users don't enable GCOV, and based on a prior patch, it is now also disabled for 'allmodconfig' builds, so there should be no downsides of doing this. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Michal Marek <mmarek@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30Kbuild: disable 'maybe-uninitialized' warning for CONFIG_PROFILE_ALL_BRANCHESArnd Bergmann
commit 815eb71e7149ecce40db9dd0ad09c4dd9d33c60f upstream. CONFIG_PROFILE_ALL_BRANCHES confuses gcc-5.x to the degree that it prints incorrect warnings about a lot of variables that it thinks can be used uninitialized, e.g.: i2c/busses/i2c-diolan-u2c.c: In function 'diolan_usb_xfer': i2c/busses/i2c-diolan-u2c.c:391:16: warning: 'byte' may be used uninitialized in this function iio/gyro/itg3200_core.c: In function 'itg3200_probe': iio/gyro/itg3200_core.c:213:6: warning: 'val' may be used uninitialized in this function leds/leds-lp55xx-common.c: In function 'lp55xx_update_bits': leds/leds-lp55xx-common.c:350:6: warning: 'tmp' may be used uninitialized in this function misc/bmp085.c: In function 'show_pressure': misc/bmp085.c:363:10: warning: 'pressure' may be used uninitialized in this function power/ds2782_battery.c: In function 'ds2786_get_capacity': power/ds2782_battery.c:214:17: warning: 'raw' may be used uninitialized in this function These are all false positives that either rob someone's time when trying to figure out whether they are real, or they get people to send wrong patches to shut up the warnings. Nobody normally wants to run a CONFIG_PROFILE_ALL_BRANCHES kernel in production, so disabling the whole class of warnings for this configuration has no serious downsides either. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Steven Rostedt <rostedtgoodmis.org> Signed-off-by: Michal Marek <mmarek@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30kbuild: forbid kernel directory to contain spaces and colonsRobert Jarzmik
commit 51193b76bfff5027cf96ba63effae808ad67cca7 upstream. When the kernel path contains a space or a colon somewhere in the path name, the modules_install target doesn't work anymore, as the path names are not enclosed in double quotes. It is also supposed that and O= build will suffer from the same weakness as modules_install. Instead of checking and improving kbuild to resist to directories including these characters, error out early to prevent any build if the kernel's main directory contains a space. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Michal Marek <mmarek@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30tools: Support relative directory path for 'O='Josh Poimboeuf
commit e17cf3a80d4ba0c4e40bf1a89deb1354c2e10e14 upstream. Running "make O=foo" (with a relative directory path) fails with: scripts/Makefile.include:3: *** O=foo does not exist. Stop. /home/jpoimboe/git/linux/Makefile:1547: recipe for target 'tools/objtool' failed The tools Makefile gets confused by the relative path and tries to build objtool in tools/foo. Convert the output directory to an absolute path before passing it to the tools Makefile. Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-next@vger.kernel.org Cc: linux@roeck-us.net Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/94a078c6c998fac9f01a14f574008bf7dff40191.1457016803.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30Makefile: revert "Makefile: Document ability to make file.lst and file.S" ↵Wang YanQing
partially commit 40ab87a4003c7952976ce901a2b9ece5ed833168 upstream. Commit 627189797807 ("Makefile: Document ability to make file.lst and file.S") document ability to make file.S, but there isn't such ability in kbuild, so revert it. Signed-off-by: Wang YanQing <udknight@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30kbuild: Do not run modules_install and install in paralelMichal Marek
commit a85a41ed69f27c4c667d8c418df14b4fb220c4ad upstream. Based on a x86-only patch by Andy Lutomirski <luto@amacapital.net> With modular kernels, 'make install' is going to need the installed modules at some point to generate the initramfs. Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30ocfs2: fix start offset to ocfs2_zero_range_for_truncate()Ashish Samant
commit d21c353d5e99c56cdd5b5c1183ffbcaf23b8b960 upstream. If we punch a hole on a reflink such that following conditions are met: 1. start offset is on a cluster boundary 2. end offset is not on a cluster boundary 3. (end offset is somewhere in another extent) or (hole range > MAX_CONTIG_BYTES(1MB)), we dont COW the first cluster starting at the start offset. But in this case, we were wrongly passing this cluster to ocfs2_zero_range_for_truncate() to zero out. This will modify the cluster in place and zero it in the source too. Fix this by skipping this cluster in such a scenario. To reproduce: 1. Create a random file of say 10 MB xfs_io -c 'pwrite -b 4k 0 10M' -f 10MBfile 2. Reflink it reflink -f 10MBfile reflnktest 3. Punch a hole at starting at cluster boundary with range greater that 1MB. You can also use a range that will put the end offset in another extent. fallocate -p -o 0 -l 1048615 reflnktest 4. sync 5. Check the first cluster in the source file. (It will be zeroed out). dd if=10MBfile iflag=direct bs=<cluster size> count=1 | hexdump -C Link: http://lkml.kernel.org/r/1470957147-14185-1-git-send-email-ashish.samant@oracle.com Signed-off-by: Ashish Samant <ashish.samant@oracle.com> Reported-by: Saar Maoz <saar.maoz@oracle.com> Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Eric Ren <zren@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30ocfs2/dlm: fix race between convert and migrationJoseph Qi
commit e6f0c6e6170fec175fe676495f29029aecdf486c upstream. Commit ac7cf246dfdb ("ocfs2/dlm: fix race between convert and recovery") checks if lockres master has changed to identify whether new master has finished recovery or not. This will introduce a race that right after old master does umount ( means master will change), a new convert request comes. In this case, it will reset lockres state to DLM_RECOVERING and then retry convert, and then fail with lockres->l_action being set to OCFS2_AST_INVALID, which will cause inconsistent lock level between ocfs2 and dlm, and then finally BUG. Since dlm recovery will clear lock->convert_pending in dlm_move_lockres_to_recovery_list, we can use it to correctly identify the race case between convert and recovery. So fix it. Fixes: ac7cf246dfdb ("ocfs2/dlm: fix race between convert and recovery") Link: http://lkml.kernel.org/r/57CE1569.8010704@huawei.com Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30crypto: echainiv - Replace chaining with multiplicationHerbert Xu
commit 53a5d5ddccf849dbc27a8c1bba0b43c3a45fb792 upstream. The current implementation uses a global per-cpu array to store data which are used to derive the next IV. This is insecure as the attacker may change the stored data. This patch removes all traces of chaining and replaces it with multiplication of the salt and the sequence number. Fixes: a10f554fa7e0 ("crypto: echainiv - Add encrypted chain IV...") Reported-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30crypto: skcipher - Fix blkcipher walk OOM crashHerbert Xu
commit acdb04d0b36769b3e05990c488dc74d8b7ac8060 upstream. When we need to allocate a temporary blkcipher_walk_next and it fails, the code is supposed to take the slow path of processing the data block by block. However, due to an unrelated change we instead end up dereferencing the NULL pointer. This patch fixes it by moving the unrelated bsize setting out of the way so that we enter the slow path as inteded. Fixes: 7607bd8ff03b ("[CRYPTO] blkcipher: Added blkcipher_walk_virt_block") Reported-by: xiakaixu <xiakaixu@huawei.com> Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30crypto: arm/aes-ctr - fix NULL dereference in tail processingArd Biesheuvel
commit f82e90b28654804ab72881d577d87c3d5c65e2bc upstream. The AES-CTR glue code avoids calling into the blkcipher API for the tail portion of the walk, by comparing the remainder of walk.nbytes modulo AES_BLOCK_SIZE with the residual nbytes, and jumping straight into the tail processing block if they are equal. This tail processing block checks whether nbytes != 0, and does nothing otherwise. However, in case of an allocation failure in the blkcipher layer, we may enter this code with walk.nbytes == 0, while nbytes > 0. In this case, we should not dereference the source and destination pointers, since they may be NULL. So instead of checking for nbytes != 0, check for (walk.nbytes % AES_BLOCK_SIZE) != 0, which implies the former in non-error conditions. Fixes: 86464859cc77 ("crypto: arm - AES in ECB/CBC/CTR/XTS modes using ARMv8 Crypto Extensions") Reported-by: xiakaixu <xiakaixu@huawei.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30crypto: arm64/aes-ctr - fix NULL dereference in tail processingArd Biesheuvel
commit 2db34e78f126c6001d79d3b66ab1abb482dc7caa upstream. The AES-CTR glue code avoids calling into the blkcipher API for the tail portion of the walk, by comparing the remainder of walk.nbytes modulo AES_BLOCK_SIZE with the residual nbytes, and jumping straight into the tail processing block if they are equal. This tail processing block checks whether nbytes != 0, and does nothing otherwise. However, in case of an allocation failure in the blkcipher layer, we may enter this code with walk.nbytes == 0, while nbytes > 0. In this case, we should not dereference the source and destination pointers, since they may be NULL. So instead of checking for nbytes != 0, check for (walk.nbytes % AES_BLOCK_SIZE) != 0, which implies the former in non-error conditions. Fixes: 49788fe2a128 ("arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions") Reported-by: xiakaixu <xiakaixu@huawei.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30tcp: properly scale window in tcp_v[46]_reqsk_send_ack()Eric Dumazet
[ Upstream commit 20a2b49fc538540819a0c552877086548cff8d8d ] When sending an ack in SYN_RECV state, we must scale the offered window if wscale option was negotiated and accepted. Tested: Following packetdrill test demonstrates the issue : 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 // Establish a connection. +0 < S 0:0(0) win 20000 <mss 1000,sackOK,wscale 7, nop, TS val 100 ecr 0> +0 > S. 0:0(0) ack 1 win 28960 <mss 1460,sackOK, TS val 100 ecr 100, nop, wscale 7> +0 < . 1:11(10) ack 1 win 156 <nop,nop,TS val 99 ecr 100> // check that window is properly scaled ! +0 > . 1:1(0) ack 1 win 226 <nop,nop,TS val 200 ecr 100> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
2016-09-30tcp: fix use after free in tcp_xmit_retransmit_queue()Eric Dumazet
[ Upstream commit bb1fceca22492109be12640d49f5ea5a544c6bb4 ] When tcp_sendmsg() allocates a fresh and empty skb, it puts it at the tail of the write queue using tcp_add_write_queue_tail() Then it attempts to copy user data into this fresh skb. If the copy fails, we undo the work and remove the fresh skb. Unfortunately, this undo lacks the change done to tp->highest_sack and we can leave a dangling pointer (to a freed skb) Later, tcp_xmit_retransmit_queue() can dereference this pointer and access freed memory. For regular kernels where memory is not unmapped, this might cause SACK bugs because tcp_highest_sack_seq() is buggy, returning garbage instead of tp->snd_nxt, but with various debug features like CONFIG_DEBUG_PAGEALLOC, this can crash the kernel. This bug was found by Marco Grassi thanks to syzkaller. Fixes: 6859d49475d4 ("[TCP]: Abstract tp->highest_sack accessing & point to next skb") Reported-by: Marco Grassi <marco.gra@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
2016-09-30tcp: cwnd does not increase in TCP YeAHArtem Germanov
[ Upstream commit db7196a0d0984b933ccf2cd6a60e26abf466e8a3 ] Commit 76174004a0f19785a328f40388e87e982bbf69b9 (tcp: do not slow start when cwnd equals ssthresh ) introduced regression in TCP YeAH. Using 100ms delay 1% loss virtual ethernet link kernel 4.2 shows bandwidth ~500KB/s for single TCP connection and kernel 4.3 and above (including 4.8-rc4) shows bandwidth ~100KB/s. That is caused by stalled cwnd when cwnd equals ssthresh. This patch fixes it by proper increasing cwnd in this case. Signed-off-by: Artem Germanov <agermanov@anchorfree.com> Acked-by: Dmitry Adamushko <d.adamushko@anchorfree.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Holger Hoffstätte <holger@applied-asynchrony.com>
2016-09-30ipv6: release dst in ping_v6_sendmsgDave Jones
[ Upstream commit 03c2778a938aaba0893f6d6cdc29511d91a79848 ] Neither the failure or success paths of ping_v6_sendmsg release the dst it acquires. This leads to a flood of warnings from "net/core/dst.c:288 dst_release" on older kernels that don't have 8bf4ada2e21378816b28205427ee6b0e1ca4c5f1 backported. That patch optimistically hoped this had been fixed post 3.10, but it seems at least one case wasn't, where I've seen this triggered a lot from machines doing unprivileged icmp sockets. Cc: Martin Lau <kafai@fb.com> Signed-off-by: Dave Jones <davej@codemonkey.org.uk> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
2016-09-30ipv4: panic in leaf_walk_rcu due to stale node pointerDavid Forster
[ Upstream commit 94d9f1c5906b20053efe375b6d66610bca4b8b64 ] Panic occurs when issuing "cat /proc/net/route" whilst populating FIB with > 1M routes. Use of cached node pointer in fib_route_get_idx is unsafe. BUG: unable to handle kernel paging request at ffffc90001630024 IP: [<ffffffff814cf6a0>] leaf_walk_rcu+0x10/0xe0 PGD 11b08d067 PUD 11b08e067 PMD dac4b067 PTE 0 Oops: 0000 [#1] SMP Modules linked in: nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscac snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep virti acpi_cpufreq button parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd tio_ring virtio floppy uhci_hcd ehci_hcd usbcore usb_common libata scsi_mod CPU: 1 PID: 785 Comm: cat Not tainted 4.2.0-rc8+ #4 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 task: ffff8800da1c0bc0 ti: ffff88011a05c000 task.ti: ffff88011a05c000 RIP: 0010:[<ffffffff814cf6a0>] [<ffffffff814cf6a0>] leaf_walk_rcu+0x10/0xe0 RSP: 0018:ffff88011a05fda0 EFLAGS: 00010202 RAX: ffff8800d8a40c00 RBX: ffff8800da4af940 RCX: ffff88011a05ff20 RDX: ffffc90001630020 RSI: 0000000001013531 RDI: ffff8800da4af950 RBP: 0000000000000000 R08: ffff8800da1f9a00 R09: 0000000000000000 R10: ffff8800db45b7e4 R11: 0000000000000246 R12: ffff8800da4af950 R13: ffff8800d97a74c0 R14: 0000000000000000 R15: ffff8800d97a7480 FS: 00007fd3970e0700(0000) GS:ffff88011fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffffc90001630024 CR3: 000000011a7e4000 CR4: 00000000000006e0 Stack: ffffffff814d00d3 0000000000000000 ffff88011a05ff20 ffff8800da1f9a00 ffffffff811dd8b9 0000000000000800 0000000000020000 00007fd396f35000 ffffffff811f8714 0000000000003431 ffffffff8138dce0 0000000000000f80 Call Trace: [<ffffffff814d00d3>] ? fib_route_seq_start+0x93/0xc0 [<ffffffff811dd8b9>] ? seq_read+0x149/0x380 [<ffffffff811f8714>] ? fsnotify+0x3b4/0x500 [<ffffffff8138dce0>] ? process_echoes+0x70/0x70 [<ffffffff8121cfa7>] ? proc_reg_read+0x47/0x70 [<ffffffff811bb823>] ? __vfs_read+0x23/0xd0 [<ffffffff811bbd42>] ? rw_verify_area+0x52/0xf0 [<ffffffff811bbe61>] ? vfs_read+0x81/0x120 [<ffffffff811bcbc2>] ? SyS_read+0x42/0xa0 [<ffffffff81549ab2>] ? entry_SYSCALL_64_fastpath+0x16/0x75 Code: 48 85 c0 75 d8 f3 c3 31 c0 c3 f3 c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 a 04 89 f0 33 02 44 89 c9 48 d3 e8 0f b6 4a 05 49 89 RIP [<ffffffff814cf6a0>] leaf_walk_rcu+0x10/0xe0 RSP <ffff88011a05fda0> CR2: ffffc90001630024 Signed-off-by: Dave Forster <dforster@brocade.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
2016-09-30reiserfs: fix "new_insert_key may be used uninitialized ..."Jeff Mahoney
commit 0a11b9aae49adf1f952427ef1a1d9e793dd6ffb6 upstream. new_insert_key only makes any sense when it's associated with a new_insert_ptr, which is initialized to NULL and changed to a buffer_head when we also initialize new_insert_key. We can key off of that to avoid the uninitialized warning. Link: http://lkml.kernel.org/r/5eca5ffb-2155-8df2-b4a2-f162f105efed@suse.com Signed-off-by: Jeff Mahoney <jeffm@suse.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jan Kara <jack@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30Fix build warning in kernel/cpuset.cArnd Bergmann
> 2 ../kernel/cpuset.c:2101:11: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types] > 1 ../kernel/cpuset.c:2101:2: warning: initialization from incompatible pointer type > 1 ../kernel/cpuset.c:2101:2: warning: (near initialization for 'cpuset_cgrp_subsys.fork') This got introduced by 06ec7a1d7646 ("cpuset: make sure new tasks conform to the current config of the cpuset"). In the upstream kernel, the function prototype was changed as of b53202e63089 ("cgroup: kill cgrp_ss_priv[CGROUP_CANFORK_COUNT] and friends"). That patch is not suitable for stable kernels, and fortunately the warning seems harmless as the prototypes only differ in the second argument that is unused. Adding that argument gets rid of the warning: Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-30include/linux/kernel.h: change abs() macro so it uses consistent return typeMichal Nazarewicz
commit 8f57e4d930d48217268315898212518d4d3e0773 upstream. Rewrite abs() so that its return type does not depend on the architecture and no unexpected type conversion happen inside of it. The only conversion is from unsigned to signed type. char is left as a return type but treated as a signed type regradless of it's actual signedness. With the old version, int arguments were promoted to long and depending on architecture a long argument might result in s64 or long return type (which may or may not be the same). This came after some back and forth with Nicolas. The current macro has different return type (for the same input type) depending on architecture which might be midly iritating. An alternative version would promote to int like so: #define abs(x) __abs_choose_expr(x, long long, \ __abs_choose_expr(x, long, \ __builtin_choose_expr( \ sizeof(x) <= sizeof(int), \ ({ int __x = (x); __x<0?-__x:__x; }), \ ((void)0)))) I have no preference but imagine Linus might. :] Nicolas argument against is that promoting to int causes iconsistent behaviour: int main(void) { unsigned short a = 0, b = 1, c = a - b; unsigned short d = abs(a - b); unsigned short e = abs(c); printf("%u %u\n", d, e); // prints: 1 65535 } Then again, no sane person expects consistent behaviour from C integer arithmetic. ;) Note: __builtin_types_compatible_p(unsigned char, char) is always false, and __builtin_types_compatible_p(signed char, char) is also always false. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-24Linux 4.4.22v4.4.22Greg Kroah-Hartman
2016-09-24openrisc: fix the fix of copy_from_user()Guenter Roeck
commit 8e4b72054f554967827e18be1de0e8122e6efc04 upstream. Since commit acb2505d0119 ("openrisc: fix copy_from_user()"), copy_from_user() returns the number of bytes requested, not the number of bytes not copied. Cc: Al Viro <viro@zeniv.linux.org.uk> Fixes: acb2505d0119 ("openrisc: fix copy_from_user()") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-24avr32: fix 'undefined reference to `___copy_from_user'Guenter Roeck
commit 65c0044ca8d7c7bbccae37f0ff2972f0210e9f41 upstream. avr32 builds fail with: arch/avr32/kernel/built-in.o: In function `arch_ptrace': (.text+0x650): undefined reference to `___copy_from_user' arch/avr32/kernel/built-in.o:(___ksymtab+___copy_from_user+0x0): undefined reference to `___copy_from_user' kernel/built-in.o: In function `proc_doulongvec_ms_jiffies_minmax': (.text+0x5dd8): undefined reference to `___copy_from_user' kernel/built-in.o: In function `proc_dointvec_minmax_sysadmin': sysctl.c:(.text+0x6174): undefined reference to `___copy_from_user' kernel/built-in.o: In function `ptrace_has_cap': ptrace.c:(.text+0x69c0): undefined reference to `___copy_from_user' kernel/built-in.o:ptrace.c:(.text+0x6b90): more undefined references to `___copy_from_user' follow Fixes: 8630c32275ba ("avr32: fix copy_from_user()") Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-24ia64: copy_from_user() should zero the destination on access_ok() failureAl Viro
commit a5e541f796f17228793694d64b507f5f57db4cd7 upstream. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-24genirq/msi: Fix broken debug outputThomas Gleixner
commit 4364e1a29be16b2783c0bcbc263f61236af64281 upstream. virq is not required to be the same for all msi descs. Use the base irq number from the desc in the debug printk. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-24ppc32: fix copy_from_user()Al Viro
commit 224264657b8b228f949b42346e09ed8c90136a8e upstream. should clear on access_ok() failures. Also remove the useless range truncation logics. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-24sparc32: fix copy_from_user()Al Viro
commit 917400cecb4b52b5cde5417348322bb9c8272fa6 upstream. Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-24mn10300: copy_from_user() should zero on access_ok() failure...Al Viro
commit ae7cc577ec2a4a6151c9e928fd1f595d953ecef1 upstream. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>