summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-01-10mailmap: add codeaurora.org names for nameless email commitsStephen Boyd
Some codeaurora.org emails have crept in but the names don't exist for them. Add the names for the emails so git can match everyone up. Link: http://lkml.kernel.org/r/20170104194611.25933-1-sboyd@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Sarangdhar Joshi <spjoshi@codeaurora.org> Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Cc: Subhash Jadavani <subhashj@codeaurora.org> Cc: Thomas Pedersen <twp@codeaurora.org> Cc: Andy Gross <andy.gross@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-10signal: protect SIGNAL_UNKILLABLE from unintentional clearing.Jamie Iles
Since commit 00cd5c37afd5 ("ptrace: permit ptracing of /sbin/init") we can now trace init processes. init is initially protected with SIGNAL_UNKILLABLE which will prevent fatal signals such as SIGSTOP, but there are a number of paths during tracing where SIGNAL_UNKILLABLE can be implicitly cleared. This can result in init becoming stoppable/killable after tracing. For example, running: while true; do kill -STOP 1; done & strace -p 1 and then stopping strace and the kill loop will result in init being left in state TASK_STOPPED. Sending SIGCONT to init will resume it, but init will now respond to future SIGSTOP signals rather than ignoring them. Make sure that when setting SIGNAL_STOP_CONTINUED/SIGNAL_STOP_STOPPED that we don't clear SIGNAL_UNKILLABLE. Link: http://lkml.kernel.org/r/20170104122017.25047-1-jamie.iles@oracle.com Signed-off-by: Jamie Iles <jamie.iles@oracle.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-10mm: pmd dirty emulation in page fault handlerMinchan Kim
Andreas reported [1] made a test in jemalloc hang in THP mode in arm64: http://lkml.kernel.org/r/mvmmvfy37g1.fsf@hawking.suse.de The problem is currently page fault handler doesn't supports dirty bit emulation of pmd for non-HW dirty-bit architecture so that application stucks until VM marked the pmd dirty. How the emulation work depends on the architecture. In case of arm64, when it set up pte firstly, it sets pte PTE_RDONLY to get a chance to mark the pte dirty via triggering page fault when store access happens. Once the page fault occurs, VM marks the pmd dirty and arch code for setting pmd will clear PTE_RDONLY for application to proceed. IOW, if VM doesn't mark the pmd dirty, application hangs forever by repeated fault(i.e., store op but the pmd is PTE_RDONLY). This patch enables pmd dirty-bit emulation for those architectures. [1] b8d3c4c3009d, mm/huge_memory.c: don't split THP page when MADV_FREE syscall is called Fixes: b8d3c4c3009d ("mm/huge_memory.c: don't split THP page when MADV_FREE syscall is called") Link: http://lkml.kernel.org/r/1482506098-6149-1-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: Andreas Schwab <schwab@suse.de> Tested-by: Andreas Schwab <schwab@suse.de> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Jason Evans <je@fb.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> [4.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-10ipc/sem.c: fix incorrect sem_lock pairingManfred Spraul
Based on the syzcaller test case from dvyukov: https://gist.githubusercontent.com/dvyukov/d0e5efefe4d7d6daed829f5c3ca26a40/raw/08d0a261fe3c987bed04fbf267e08ba04bd533ea/gistfile1.txt The slow (i.e.: failure to acquire) syscall exit from semtimedop() incorrectly assumed that the the same lock is acquired as it was at the initial syscall entry. This is wrong: - thread A: single semop semop(), sleeps - thread B: multi semop semop(), sleeps - thread A: woken up by signal/timeout With this sequence, the initial sem_lock() call locks the per-semaphore spinlock, and it is unlocked with sem_unlock(). The call at the syscall return locks the global spinlock. Because locknum is not updated, the following sem_unlock() call unlocks the per-semaphore spinlock, which is actually not locked. The fix is trivial: Use the return value from sem_lock. Fixes: 370b262c896e ("ipc/sem: avoid idr tree lookup for interrupted semop") Link: http://lkml.kernel.org/r/1482215645-22328-1-git-send-email-manfred@colorfullife.com Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Johanna Abrahamsson <johanna@mjao.org> Tested-by: Johanna Abrahamsson <johanna@mjao.org> Acked-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-10lib/Kconfig.debug: fix frv build failureSudip Mukherjee
The build of frv allmodconfig was failing with the errors like: /tmp/cc0JSPc3.s: Assembler messages: /tmp/cc0JSPc3.s:1839: Error: symbol `.LSLT0' is already defined /tmp/cc0JSPc3.s:1842: Error: symbol `.LASLTP0' is already defined /tmp/cc0JSPc3.s:1969: Error: symbol `.LELTP0' is already defined /tmp/cc0JSPc3.s:1970: Error: symbol `.LELT0' is already defined Commit 866ced950bcd ("kbuild: Support split debug info v4") introduced splitting the debug info and keeping that in a separate file. Somehow, the frv-linux gcc did not like that and I am guessing that instead of splitting it started copying. The first report about this is at: https://lists.01.org/pipermail/kbuild-all/2015-July/010527.html. I will try and see if this can work with frv and if still fails I will open a bug report with gcc. But meanwhile this is the easiest option to solve build failure of frv. Fixes: 866ced950bcd ("kbuild: Support split debug info v4") Link: http://lkml.kernel.org/r/1482062348-5352-1-git-send-email-sudipm.mukherjee@gmail.com Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-10mm: get rid of __GFP_OTHER_NODEMichal Hocko
The flag was introduced by commit 78afd5612deb ("mm: add __GFP_OTHER_NODE flag") to allow proper accounting of remote node allocations done by kernel daemons on behalf of a process - e.g. khugepaged. After "mm: fix remote numa hits statistics" we do not need and actually use the flag so we can safely remove it because all allocations which are satisfied from their "home" node are accounted properly. [mhocko@suse.com: fix build] Link: http://lkml.kernel.org/r/20170106122225.GK5556@dhcp22.suse.cz Link: http://lkml.kernel.org/r/20170102153057.9451-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-10mm: fix remote numa hits statisticsMichal Hocko
Jia He has noticed that commit b9f00e147f27 ("mm, page_alloc: reduce branches in zone_statistics") has an unintentional side effect that remote node allocation requests are accounted as NUMA_MISS rathat than NUMA_HIT and NUMA_OTHER if such a request doesn't use __GFP_OTHER_NODE. There are many of these potentially because the flag is used very rarely while we have many users of __alloc_pages_node. Fix this by simply ignoring __GFP_OTHER_NODE (it can be removed in a follow up patch) and treat all allocations that were satisfied from the preferred zone's node as NUMA_HITS because this is the same node we requested the allocation from in most cases. If this is not the local node then we just account it as NUMA_OTHER rather than NUMA_LOCAL. One downsize would be that an allocation request for a node which is outside of the mempolicy nodemask would be reported as a hit which is a bit weird but that was the case before b9f00e147f27 already. Fixes: b9f00e147f27 ("mm, page_alloc: reduce branches in zone_statistics") Link: http://lkml.kernel.org/r/20170102153057.9451-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Jia He <hejianet@gmail.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> # with cbmc[1] superpowers Acked-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-10mm: fix devm_memremap_pages crash, use mem_hotplug_{begin, done}Dan Williams
Both arch_add_memory() and arch_remove_memory() expect a single threaded context. For example, arch/x86/mm/init_64.c::kernel_physical_mapping_init() does not hold any locks over this check and branch: if (pgd_val(*pgd)) { pud = (pud_t *)pgd_page_vaddr(*pgd); paddr_last = phys_pud_init(pud, __pa(vaddr), __pa(vaddr_end), page_size_mask); continue; } pud = alloc_low_page(); paddr_last = phys_pud_init(pud, __pa(vaddr), __pa(vaddr_end), page_size_mask); The result is that two threads calling devm_memremap_pages() simultaneously can end up colliding on pgd initialization. This leads to crash signatures like the following where the loser of the race initializes the wrong pgd entry: BUG: unable to handle kernel paging request at ffff888ebfff0000 IP: memcpy_erms+0x6/0x10 PGD 2f8e8fc067 PUD 0 /* <---- Invalid PUD */ Oops: 0000 [#1] SMP DEBUG_PAGEALLOC CPU: 54 PID: 3818 Comm: systemd-udevd Not tainted 4.6.7+ #13 task: ffff882fac290040 ti: ffff882f887a4000 task.ti: ffff882f887a4000 RIP: memcpy_erms+0x6/0x10 [..] Call Trace: ? pmem_do_bvec+0x205/0x370 [nd_pmem] ? blk_queue_enter+0x3a/0x280 pmem_rw_page+0x38/0x80 [nd_pmem] bdev_read_page+0x84/0xb0 Hold the standard memory hotplug mutex over calls to arch_{add,remove}_memory(). Fixes: 41e94a851304 ("add devm_memremap_pages") Link: http://lkml.kernel.org/r/148357647831.9498.12606007370121652979.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-10ocfs2: fix crash caused by stale lvb with fsdlm pluginEric Ren
The crash happens rather often when we reset some cluster nodes while nodes contend fiercely to do truncate and append. The crash backtrace is below: dlm: C21CBDA5E0774F4BA5A9D4F317717495: dlm_recover_grant 1 locks on 971 resources dlm: C21CBDA5E0774F4BA5A9D4F317717495: dlm_recover 9 generation 5 done: 4 ms ocfs2: Begin replay journal (node 318952601, slot 2) on device (253,18) ocfs2: End replay journal (node 318952601, slot 2) on device (253,18) ocfs2: Beginning quota recovery on device (253,18) for slot 2 ocfs2: Finishing quota recovery on device (253,18) for slot 2 (truncate,30154,1):ocfs2_truncate_file:470 ERROR: bug expression: le64_to_cpu(fe->i_size) != i_size_read(inode) (truncate,30154,1):ocfs2_truncate_file:470 ERROR: Inode 290321, inode i_size = 732 != di i_size = 937, i_flags = 0x1 ------------[ cut here ]------------ kernel BUG at /usr/src/linux/fs/ocfs2/file.c:470! invalid opcode: 0000 [#1] SMP Modules linked in: ocfs2_stack_user(OEN) ocfs2(OEN) ocfs2_nodemanager ocfs2_stackglue(OEN) quota_tree dlm(OEN) configfs fuse sd_mod iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi af_packet iscsi_ibft iscsi_boot_sysfs softdog xfs libcrc32c ppdev parport_pc pcspkr parport joydev virtio_balloon virtio_net i2c_piix4 acpi_cpufreq button processor ext4 crc16 jbd2 mbcache ata_generic cirrus virtio_blk ata_piix drm_kms_helper ahci syscopyarea libahci sysfillrect sysimgblt fb_sys_fops ttm floppy libata drm virtio_pci virtio_ring uhci_hcd virtio ehci_hcd usbcore serio_raw usb_common sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4 Supported: No, Unsupported modules are loaded CPU: 1 PID: 30154 Comm: truncate Tainted: G OE N 4.4.21-69-default #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.1-0-g4adadbd-20151112_172657-sheep25 04/01/2014 task: ffff88004ff6d240 ti: ffff880074e68000 task.ti: ffff880074e68000 RIP: 0010:[<ffffffffa05c8c30>] [<ffffffffa05c8c30>] ocfs2_truncate_file+0x640/0x6c0 [ocfs2] RSP: 0018:ffff880074e6bd50 EFLAGS: 00010282 RAX: 0000000000000074 RBX: 000000000000029e RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000246 RDI: 0000000000000246 RBP: ffff880074e6bda8 R08: 000000003675dc7a R09: ffffffff82013414 R10: 0000000000034c50 R11: 0000000000000000 R12: ffff88003aab3448 R13: 00000000000002dc R14: 0000000000046e11 R15: 0000000000000020 FS: 00007f839f965700(0000) GS:ffff88007fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f839f97e000 CR3: 0000000036723000 CR4: 00000000000006e0 Call Trace: ocfs2_setattr+0x698/0xa90 [ocfs2] notify_change+0x1ae/0x380 do_truncate+0x5e/0x90 do_sys_ftruncate.constprop.11+0x108/0x160 entry_SYSCALL_64_fastpath+0x12/0x6d Code: 24 28 ba d6 01 00 00 48 c7 c6 30 43 62 a0 8b 41 2c 89 44 24 08 48 8b 41 20 48 c7 c1 78 a3 62 a0 48 89 04 24 31 c0 e8 a0 97 f9 ff <0f> 0b 3d 00 fe ff ff 0f 84 ab fd ff ff 83 f8 fc 0f 84 a2 fd ff RIP [<ffffffffa05c8c30>] ocfs2_truncate_file+0x640/0x6c0 [ocfs2] It's because ocfs2_inode_lock() get us stale LVB in which the i_size is not equal to the disk i_size. We mistakenly trust the LVB because the underlaying fsdlm dlm_lock() doesn't set lkb_sbflags with DLM_SBF_VALNOTVALID properly for us. But, why? The current code tries to downconvert lock without DLM_LKF_VALBLK flag to tell o2cb don't update RSB's LVB if it's a PR->NULL conversion, even if the lock resource type needs LVB. This is not the right way for fsdlm. The fsdlm plugin behaves different on DLM_LKF_VALBLK, it depends on DLM_LKF_VALBLK to decide if we care about the LVB in the LKB. If DLM_LKF_VALBLK is not set, fsdlm will skip recovering RSB's LVB from this lkb and set the right DLM_SBF_VALNOTVALID appropriately when node failure happens. The following diagram briefly illustrates how this crash happens: RSB1 is inode metadata lock resource with LOCK_TYPE_USES_LVB; The 1st round: Node1 Node2 RSB1: PR RSB1(master): NULL->EX ocfs2_downconvert_lock(PR->NULL, set_lvb==0) ocfs2_dlm_lock(no DLM_LKF_VALBLK) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - dlm_lock(no DLM_LKF_VALBLK) convert_lock(overwrite lkb->lkb_exflags with no DLM_LKF_VALBLK) RSB1: NULL RSB1: EX reset Node2 dlm_recover_rsbs() recover_lvb() /* The LVB is not trustable if the node with EX fails and * no lock >= PR is left. We should set RSB_VALNOTVALID for RSB1. */ if(!(kb_exflags & DLM_LKF_VALBLK)) /* This means we miss the chance to return; * to invalid the LVB here. */ The 2nd round: Node 1 Node2 RSB1(become master from recovery) ocfs2_setattr() ocfs2_inode_lock(NULL->EX) /* dlm_lock() return the stale lvb without setting DLM_SBF_VALNOTVALID */ ocfs2_meta_lvb_is_trustable() return 1 /* so we don't refresh inode from disk */ ocfs2_truncate_file() mlog_bug_on_msg(disk isize != i_size_read(inode)) /* crash! */ The fix is quite straightforward. We keep to set DLM_LKF_VALBLK flag for dlm_lock() if the lock resource type needs LVB and the fsdlm plugin is uesed. Link: http://lkml.kernel.org/r/1481275846-6604-1-git-send-email-zren@suse.com Signed-off-by: Eric Ren <zren@suse.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-10bpf: do not use KMALLOC_SHIFT_MAXMichal Hocko
Commit 01b3f52157ff ("bpf: fix allocation warnings in bpf maps and integer overflow") has added checks for the maximum allocateable size. It (ab)used KMALLOC_SHIFT_MAX for that purpose. While this is not incorrect it is not very clean because we already have KMALLOC_MAX_SIZE for this very reason so let's change both checks to use KMALLOC_MAX_SIZE instead. The original motivation for using KMALLOC_SHIFT_MAX was to work around an incorrect KMALLOC_MAX_SIZE which could lead to allocation warnings but it is no longer needed since "slab: make sure that KMALLOC_MAX_SIZE will fit into MAX_ORDER". Link: http://lkml.kernel.org/r/20161220130659.16461-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-10mm, slab: make sure that KMALLOC_MAX_SIZE will fit into MAX_ORDERMichal Hocko
Andrey Konovalov has reported the following warning triggered by the syzkaller fuzzer. WARNING: CPU: 1 PID: 9935 at mm/page_alloc.c:3511 __alloc_pages_nodemask+0x159c/0x1e20 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 9935 Comm: syz-executor0 Not tainted 4.9.0-rc7+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __alloc_pages_slowpath mm/page_alloc.c:3511 __alloc_pages_nodemask+0x159c/0x1e20 mm/page_alloc.c:3781 alloc_pages_current+0x1c7/0x6b0 mm/mempolicy.c:2072 alloc_pages include/linux/gfp.h:469 kmalloc_order+0x1f/0x70 mm/slab_common.c:1015 kmalloc_order_trace+0x1f/0x160 mm/slab_common.c:1026 kmalloc_large include/linux/slab.h:422 __kmalloc+0x210/0x2d0 mm/slub.c:3723 kmalloc include/linux/slab.h:495 ep_write_iter+0x167/0xb50 drivers/usb/gadget/legacy/inode.c:664 new_sync_write fs/read_write.c:499 __vfs_write+0x483/0x760 fs/read_write.c:512 vfs_write+0x170/0x4e0 fs/read_write.c:560 SYSC_write fs/read_write.c:607 SyS_write+0xfb/0x230 fs/read_write.c:599 entry_SYSCALL_64_fastpath+0x1f/0xc2 The issue is caused by a lack of size check for the request size in ep_write_iter which should be fixed. It, however, points to another problem, that SLUB defines KMALLOC_MAX_SIZE too large because the its KMALLOC_SHIFT_MAX is (MAX_ORDER + PAGE_SHIFT) which means that the resulting page allocator request might be MAX_ORDER which is too large (see __alloc_pages_slowpath). The same applies to the SLOB allocator which allows even larger sizes. Make sure that they are capped properly and never request more than MAX_ORDER order. Link: http://lkml.kernel.org/r/20161220130659.16461-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-10dax: wrprotect pmd_t in dax_mapping_entry_mkcleanRoss Zwisler
Currently dax_mapping_entry_mkclean() fails to clean and write protect the pmd_t of a DAX PMD entry during an *sync operation. This can result in data loss in the following sequence: 1) mmap write to DAX PMD, dirtying PMD radix tree entry and making the pmd_t dirty and writeable 2) fsync, flushing out PMD data and cleaning the radix tree entry. We currently fail to mark the pmd_t as clean and write protected. 3) more mmap writes to the PMD. These don't cause any page faults since the pmd_t is dirty and writeable. The radix tree entry remains clean. 4) fsync, which fails to flush the dirty PMD data because the radix tree entry was clean. 5) crash - dirty data that should have been fsync'd as part of 4) could still have been in the processor cache, and is lost. Fix this by marking the pmd_t clean and write protected in dax_mapping_entry_mkclean(), which is called as part of the fsync operation 2). This will cause the writes in step 3) above to generate page faults where we'll re-dirty the PMD radix tree entry, resulting in flushes in the fsync that happens in step 4). Fixes: 4b4bb46d00b3 ("dax: clear dirty entry tags on cache flush") Link: http://lkml.kernel.org/r/1482272586-21177-3-git-send-email-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-10mm: add follow_pte_pmd()Ross Zwisler
Patch series "Write protect DAX PMDs in *sync path". Currently dax_mapping_entry_mkclean() fails to clean and write protect the pmd_t of a DAX PMD entry during an *sync operation. This can result in data loss, as detailed in patch 2. This series is based on Dan's "libnvdimm-pending" branch, which is the current home for Jan's "dax: Page invalidation fixes" series. You can find a working tree here: https://git.kernel.org/cgit/linux/kernel/git/zwisler/linux.git/log/?h=dax_pmd_clean This patch (of 2): Similar to follow_pte(), follow_pte_pmd() allows either a PTE leaf or a huge page PMD leaf to be found and returned. Link: http://lkml.kernel.org/r/1482272586-21177-2-git-send-email-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Dave Hansen <dave.hansen@intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-10mm/thp/pagecache/collapse: free the pte page table on collapse for thp page ↵Aneesh Kumar K.V
cache. With THP page cache, when trying to build a huge page from regular pte pages, we just clear the pmd entry. We will take another fault and at that point we will find the huge page in the radix tree, thereby using the huge page to complete the page fault The second fault path will allocate the needed pgtable_t page for archs like ppc64. So no need to deposit the same in collapse path. Depositing them in the collapse path resulting in a pgtable_t memory leak also giving errors like BUG: non-zero nr_ptes on freeing mm: 3 Fixes: 953c66c2b22a ("mm: THP page cache support for ppc64") Link: http://lkml.kernel.org/r/20161212163428.6780-2-aneesh.kumar@linux.vnet.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-10dax: fix deadlock with DAX 4k holesRoss Zwisler
Currently in DAX if we have three read faults on the same hole address we can end up with the following: Thread 0 Thread 1 Thread 2 -------- -------- -------- dax_iomap_fault grab_mapping_entry lock_slot <locks empty DAX entry> dax_iomap_fault grab_mapping_entry get_unlocked_mapping_entry <sleeps on empty DAX entry> dax_iomap_fault grab_mapping_entry get_unlocked_mapping_entry <sleeps on empty DAX entry> dax_load_hole find_or_create_page ... page_cache_tree_insert dax_wake_mapping_entry_waiter <wakes one sleeper> __radix_tree_replace <swaps empty DAX entry with 4k zero page> <wakes> get_page lock_page ... put_locked_mapping_entry unlock_page put_page <sleeps forever on the DAX wait queue> The crux of the problem is that once we insert a 4k zero page, all locking from then on is done in terms of that 4k zero page and any additional threads sleeping on the empty DAX entry will never be woken. Fix this by waking all sleepers when we replace the DAX radix tree entry with a 4k zero page. This will allow all sleeping threads to successfully transition from locking based on the DAX empty entry to locking on the 4k zero page. With the test case reported by Xiong this happens very regularly in my test setup, with some runs resulting in 9+ threads in this deadlocked state. With this fix I've been able to run that same test dozens of times in a loop without issue. Fixes: ac401cc78242 ("dax: New fault locking") Link: http://lkml.kernel.org/r/1483479365-13607-1-git-send-email-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reported-by: Xiong Zhou <xzhou@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: <stable@vger.kernel.org> [4.7+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-10MAINTAINERS: remove duplicate bug filling descriptionVlastimil Babka
I have noticed that two different descriptions for B: entries in MAINTAINERS were merged: commit 686564434e88 ("MAINTAINERS: Add bug tracking system location entry type") and 2de2bd95f456 ("MAINTAINERS: add "B:" for URI where to file bugs"). This patch keeps the description from 2de2bd95f456. There has been a discussion [1] about whether this more detailed description is useful and what it exactly implies. I find it more useful and general, and the author of 686564434e88 agreed in the end that either is fine. [1] https://lkml.org/lkml/2016/12/8/71 Link: http://lkml.kernel.org/r/20161219085158.12114-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-09Merge tag 'drm-fixes-for-v4.10-rc4' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "amdgpu, radeon, msm, meson, tilcdc, drm fixes. Just back online for a couple of days, gathered up the remaining fixes pull requests. This contains fixes for a few ARM platforms (msm, tilcdc, meson), and one core atomic fix. The AMD pull has some new hardware support (Polaris12) in it, but this is pretty limited to just hw enablement and shouldn't cause any problems" * tag 'drm-fixes-for-v4.10-rc4' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: drop verde dpm quirks drm/radeon: drop verde dpm quirks drm/radeon: update smc firmware selection for SI drm/amdgpu: update si kicker smc firmware drm/amd/powerplay: extend smu's response timeout time. drm/amdgpu: remove static integer for uvd pp state drm/amd/amdgpu: add Polaris12 PCI ID drm/amdgpu/powerplay: add Polaris12 support drm/amd/amdgpu: add Polaris12 support (v3) MAINTAINERS: Update mailing list for radeon and amdgpu drm/meson: Fix CVBS VDAC disable drm/meson: Fix CVBS initialization when HDMI is configured by bootloader drm: Clean up planes in atomic commit helper failure path drm: tilcdc: simplify the recovery from sync lost error on rev1 drm/meson: Fix plane atomic check when no crtc for the plane drm/msm: Verify that MSM_SUBMIT_BO_FLAGS are set drm/msm: Put back the vaddr in submit_reloc() drm/msm: Ensure that the hardware write pointer is valid
2017-01-09Merge tag 'gpio-v4.10-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: - move freeing of GPIO hogs to after freeing the device to get rid of a warning state. - a small compile warning fix * tag 'gpio-v4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: Move freeing of GPIO hogs before numbing of the device gpio: mxs: remove __init annotation
2017-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix dumping of nft_quota entries, from Pablo Neira Ayuso. 2) Fix out of bounds access in nf_tables discovered by KASAN, from Florian Westphal. 3) Fix IRQ enabling in dp83867 driver, from Grygorii Strashko. 4) Fix unicast filtering in be2net driver, from Ivan Vecera. 5) tg3_get_stats64() can race with driver close and ethtool reconfigurations, fix from Michael Chan. 6) Fix error handling when pass limit is reached in bpf code gen on x86. From Daniel Borkmann. 7) Don't clobber switch ops and use proper MDIO nested reads and writes in bcm_sf2 driver, from Florian Fainelli. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits) net: dsa: bcm_sf2: Utilize nested MDIO read/write net: dsa: bcm_sf2: Do not clobber b53_switch_ops net: stmmac: fix maxmtu assignment to be within valid range bpf: change back to orig prog on too many passes tg3: Fix race condition in tg3_get_stats64(). be2net: fix unicast list filling be2net: fix accesses to unicast list netlabel: add CALIPSO to the list of built-in protocols vti6: fix device register to report IFLA_INFO_KIND net: phy: dp83867: fix irq generation amd-xgbe: Fix IRQ processing when running in single IRQ mode sh_eth: R8A7740 supports packet shecksumming sh_eth: fix EESIPR values for SH77{34|63} r8169: fix the typo in the comment nl80211: fix sched scan netlink socket owner destruction bridge: netfilter: Fix dropping packets that moving through bridge interface netfilter: ipt_CLUSTERIP: check duplicate config when initializing netfilter: nft_payload: mangle ckecksum if NFT_PAYLOAD_L4CSUM_PSEUDOHDR is set netfilter: nf_tables: fix oob access netfilter: nft_queue: use raw_smp_processor_id() ...
2017-01-08Merge branch 'bcm_sf2-fixes'David S. Miller
Florian Fainelli says: ==================== net: dsa: bcm_sf2: Couple fixes Here are a couple of fixes for bcm_sf2, please queue these up for -stable as well, thank you very much! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-08net: dsa: bcm_sf2: Utilize nested MDIO read/writeFlorian Fainelli
We are implementing a MDIO bus which is behind another one, so use the nested version of the accessors to get lockdep annotations correct. Fixes: 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-08net: dsa: bcm_sf2: Do not clobber b53_switch_opsFlorian Fainelli
We make the bcm_sf2 driver override ds->ops which points to b53_switch_ops since b53_switch_alloc() did the assignent. This is all well and good until a second b53 switch comes in, and ends up using the bcm_sf2 operations. Make a proper local copy, substitute the ds->ops pointer and then override the operations. Fixes: f458995b9ad8 ("net: dsa: bcm_sf2: Utilize core B53 driver when possible") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09Merge branch 'drm-fixes-4.10' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Fixes for 4.10: - Polaris 12 support - Add new amd-gfx mailing list to MAINTAINERS file - UVD clockgating fix - SI dpm fixes * 'drm-fixes-4.10' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: drop verde dpm quirks drm/radeon: drop verde dpm quirks drm/radeon: update smc firmware selection for SI drm/amdgpu: update si kicker smc firmware drm/amd/powerplay: extend smu's response timeout time. drm/amdgpu: remove static integer for uvd pp state drm/amd/amdgpu: add Polaris12 PCI ID drm/amdgpu/powerplay: add Polaris12 support drm/amd/amdgpu: add Polaris12 support (v3) MAINTAINERS: Update mailing list for radeon and amdgpu
2017-01-08net: stmmac: fix maxmtu assignment to be within valid rangeKweh, Hock Leong
There is no checking valid value of maxmtu when getting it from device tree. This resolution added the checking condition to ensure the assignment is made within a valid range. Signed-off-by: Kweh, Hock Leong <hock.leong.kweh@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09Merge branch 'msm-fixes-4.10' of ↵Dave Airlie
git://people.freedesktop.org/~robclark/linux into drm-fixes A few fixes for 4.10.. the first fixes a long-standing logic bug, that by luck (ie. size of packets written into RB for a submit) wasn't hit on a3xx/a4xx but was causing intermittent GPU lockups on a5xx. And a couple other robustness issues that Jordan noticed. * 'msm-fixes-4.10' of git://people.freedesktop.org/~robclark/linux: drm/msm: Verify that MSM_SUBMIT_BO_FLAGS are set drm/msm: Put back the vaddr in submit_reloc() drm/msm: Ensure that the hardware write pointer is valid
2017-01-09Merge tag 'meson-drm-fixes-for-4.10' of ↵Dave Airlie
git://people.freedesktop.org/~narmstrong/linux into drm-fixes - plan atomic check oops fix - fix CVBS init when HDMI is configured by bootloader - fix CVBS VDAC disable * tag 'meson-drm-fixes-for-4.10' of git://people.freedesktop.org/~narmstrong/linux: drm/meson: Fix CVBS VDAC disable drm/meson: Fix CVBS initialization when HDMI is configured by bootloader drm/meson: Fix plane atomic check when no crtc for the plane
2017-01-09Merge tag 'tilcdc-4.10-fixes' of https://github.com/jsarha/linux into drm-fixesDave Airlie
tilcdc fixes for v4.10. * tag 'tilcdc-4.10-fixes' of https://github.com/jsarha/linux: drm: tilcdc: simplify the recovery from sync lost error on rev1
2017-01-09Merge tag 'drm-misc-fixes-2017-01-04' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-fixes single drm fix. * tag 'drm-misc-fixes-2017-01-04' of git://anongit.freedesktop.org/git/drm-misc: drm: Clean up planes in atomic commit helper failure path
2017-01-08Linux 4.10-rc3v4.10-rc3Linus Torvalds
2017-01-08bpf: change back to orig prog on too many passesDaniel Borkmann
If after too many passes still no image could be emitted, then swap back to the original program as we do in all other cases and don't use the one with blinding. Fixes: 959a75791603 ("bpf, x86: add support for constant blinding") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-08Merge tag 'usb-4.10-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a bunch of USB fixes for 4.10-rc3. Yeah, it's a lot, an artifact of the holiday break I think. Lots of gadget and the usual XHCI fixups for reported issues (one day that driver will calm down...) Also included are a bunch of usb-serial driver fixes, and for good measure, a number of much-reported MUSB driver issues have finally been resolved. All of these have been in linux-next with no reported issues" * tag 'usb-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (72 commits) USB: fix problems with duplicate endpoint addresses usb: ohci-at91: use descriptor-based gpio APIs correctly usb: storage: unusual_uas: Add JMicron JMS56x to unusual device usb: hub: Move hub_port_disable() to fix warning if PM is disabled usb: musb: blackfin: add bfin_fifo_offset in bfin_ops usb: musb: fix compilation warning on unused function usb: musb: Fix trying to free already-free IRQ 4 usb: musb: dsps: implement clear_ep_rxintr() callback usb: musb: core: add clear_ep_rxintr() to musb_platform_ops USB: serial: ti_usb_3410_5052: fix NULL-deref at open USB: serial: spcp8x5: fix NULL-deref at open USB: serial: quatech2: fix sleep-while-atomic in close USB: serial: pl2303: fix NULL-deref at open USB: serial: oti6858: fix NULL-deref at open USB: serial: omninet: fix NULL-derefs at open and disconnect USB: serial: mos7840: fix misleading interrupt-URB comment USB: serial: mos7840: remove unused write URB USB: serial: mos7840: fix NULL-deref at open USB: serial: mos7720: remove obsolete port initialisation USB: serial: mos7720: fix parallel probe ...
2017-01-08Merge tag 'char-misc-4.10-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are a few small char/misc driver fixes for 4.10-rc3. Two MEI driver fixes, and three NVMEM patches for reported issues, and a new Hyper-V driver MAINTAINER update. Nothing major at all, all have been in linux-next with no reported issues" * tag 'char-misc-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: hyper-v: Add myself as additional MAINTAINER nvmem: fix nvmem_cell_read() return type doc nvmem: imx-ocotp: Fix wrong register size nvmem: qfprom: Allow single byte accesses for read/write mei: move write cb to completion on credentials failures mei: bus: fix mei_cldev_enable KDoc
2017-01-08Merge tag 'staging-4.10-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO fixes from Greg KH: "Here are some staging and IIO driver fixes for 4.10-rc3. Most of these are minor IIO fixes of reported issues, along with one network driver fix to resolve an issue. And a MAINTAINERS update with a new mailing list. All of these, except the MAINTAINERS file update, have been in linux-next with no reported issues (the MAINTAINERS patch happened on Friday...)" * tag 'staging-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: MAINTAINERS: add greybus subsystem mailing list staging: octeon: Call SET_NETDEV_DEV() iio: accel: st_accel: fix LIS3LV02 reading and scaling iio: common: st_sensors: fix channel data parsing iio: max44000: correct value in illuminance_integration_time_available iio: adc: TI_AM335X_ADC should depend on HAS_DMA iio: bmi160: Fix time needed to sleep after command execution iio: 104-quad-8: Fix active level mismatch for the preset enable option iio: 104-quad-8: Fix off-by-one errors when addressing IOR iio: 104-quad-8: Fix index control configuration
2017-01-07tg3: Fix race condition in tg3_get_stats64().Michael Chan
The driver's ndo_get_stats64() method is not always called under RTNL. So it can race with driver close or ethtool reconfigurations. Fix the race condition by taking tp->lock spinlock in tg3_free_consistent() when freeing the tp->hw_stats memory block. tg3_get_stats64() is already taking tp->lock. Reported-by: Wang Yufen <wangyufen@huawei.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-07be2net: fix unicast list fillingIvan Vecera
The adapter->pmac_id[0] item is used for primary MAC address but this is not true for adapter->uc_list[0] as is assumed in be_set_uc_list(). There are N UC addresses copied first from net_device to adapter->uc_list[1..N] and then N UC addresses from adapter->uc_list[0..N-1] are sent to HW. So the last UC address is never stored into HW and address 00:00:00:00;00:00 (from uc_list[0]) is used instead. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Fixes: b717241 be2net: replace polling with sleeping in the FW completion path Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-07mm: workingset: fix use-after-free in shadow node shrinkerJohannes Weiner
Several people report seeing warnings about inconsistent radix tree nodes followed by crashes in the workingset code, which all looked like use-after-free access from the shadow node shrinker. Dave Jones managed to reproduce the issue with a debug patch applied, which confirmed that the radix tree shrinking indeed frees shadow nodes while they are still linked to the shadow LRU: WARNING: CPU: 2 PID: 53 at lib/radix-tree.c:643 delete_node+0x1e4/0x200 CPU: 2 PID: 53 Comm: kswapd0 Not tainted 4.10.0-rc2-think+ #3 Call Trace: delete_node+0x1e4/0x200 __radix_tree_delete_node+0xd/0x10 shadow_lru_isolate+0xe6/0x220 __list_lru_walk_one.isra.4+0x9b/0x190 list_lru_walk_one+0x23/0x30 scan_shadow_nodes+0x2e/0x40 shrink_slab.part.44+0x23d/0x5d0 shrink_node+0x22c/0x330 kswapd+0x392/0x8f0 This is the WARN_ON_ONCE(!list_empty(&node->private_list)) placed in the inlined radix_tree_shrink(). The problem is with 14b468791fa9 ("mm: workingset: move shadow entry tracking to radix tree exceptional tracking"), which passes an update callback into the radix tree to link and unlink shadow leaf nodes when tree entries change, but forgot to pass the callback when reclaiming a shadow node. While the reclaimed shadow node itself is unlinked by the shrinker, its deletion from the tree can cause the left-most leaf node in the tree to be shrunk. If that happens to be a shadow node as well, we don't unlink it from the LRU as we should. Consider this tree, where the s are shadow entries: root->rnode | [0 n] | | [s ] [sssss] Now the shadow node shrinker reclaims the rightmost leaf node through the shadow node LRU: root->rnode | [0 ] | [s ] Because the parent of the deleted node is the first level below the root and has only one child in the left-most slot, the intermediate level is shrunk and the node containing the single shadow is put in its place: root->rnode | [s ] The shrinker again sees a single left-most slot in a first level node and thus decides to store the shadow in root->rnode directly and free the node - which is a leaf node on the shadow node LRU. root->rnode | s Without the update callback, the freed node remains on the shadow LRU, where it causes later shrinker runs to crash. Pass the node updater callback into __radix_tree_delete_node() in case the deletion causes the left-most branch in the tree to collapse too. Also add warnings when linked nodes are freed right away, rather than wait for the use-after-free when the list is scanned much later. Fixes: 14b468791fa9 ("mm: workingset: move shadow entry tracking to radix tree exceptional tracking") Reported-by: Dave Chinner <david@fromorbit.com> Reported-by: Hugh Dickins <hughd@google.com> Reported-by: Andrea Arcangeli <aarcange@redhat.com> Reported-and-tested-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Chris Leech <cleech@redhat.com> Cc: Lee Duncan <lduncan@suse.com> Cc: Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox <mawilcox@linuxonhyperv.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-07mm: stop leaking PageTablesHugh Dickins
4.10-rc loadtest (even on x86, and even without THPCache) fails with "fork: Cannot allocate memory" or some such; and /proc/meminfo shows PageTables growing. Commit 953c66c2b22a ("mm: THP page cache support for ppc64") that got merged in rc1 removed the freeing of an unused preallocated pagetable after do_fault_around() has called map_pages(). This is usually a good optimization, so that the followup doesn't have to reallocate one; but it's not sufficient to shift the freeing into alloc_set_pte(), since there are failure cases (most commonly VM_FAULT_RETRY) which never reach finish_fault(). Check and free it at the outer level in do_fault(), then we don't need to worry in alloc_set_pte(), and can restore that to how it was (I cannot find any reason to pte_free() under lock as it was doing). And fix a separate pagetable leak, or crash, introduced by the same change, that could only show up on some ppc64: why does do_set_pmd()'s failure case attempt to withdraw a pagetable when it never deposited one, at the same time overwriting (so leaking) the vmf->prealloc_pte? Residue of an earlier implementation, perhaps? Delete it. Fixes: 953c66c2b22a ("mm: THP page cache support for ppc64") Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-07Merge branch 'rc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild fix from Michal Marek: "The asm-prototypes.h file added in the last merge window results in invalid code with CONFIG_KMEMCHECK=y. The net result is that genksyms segfaults. This pull request fixes the header, the genksyms fix is in my kbuild branch for 4.11" * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: asm-prototypes: Clear any CPP defines before declaring the functions
2017-01-07MAINTAINERS: add greybus subsystem mailing listGreg Kroah-Hartman
The Greybus driver subsystem has a mailing list, so list it in the MAINTAINERS file so that people know to send patches there as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Johan Hovold <johan@kernel.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-06be2net: fix accesses to unicast listIvan Vecera
Commit 988d44b "be2net: Avoid redundant addition of mac address in HW" introduced be_dev_mac_add & be_uc_mac_add helpers that incorrectly access adapter->uc_list as an array of bytes instead of an array of be_eth_addr. Consequently NIC is not filled with valid data so unicast filtering is broken. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Fixes: 988d44b be2net: Avoid redundant addition of mac address in HW Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-06netlabel: add CALIPSO to the list of built-in protocolsPaul Moore
When we added CALIPSO support in Linux v4.8 we forgot to add it to the list of supported protocols with display at boot. Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-06Merge tag 'sound-4.10-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Nothing particular stands out, only a few small fixes for USB-audio, HD-audio and Firewire. The USB-audio fix is the respin of the previous race fix after a revert due to the regression" * tag 'sound-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: Revert "ALSA: firewire-lib: change structure member with proper type" ALSA: usb-audio: test EP_FLAG_RUNNING at urb completion ALSA: usb-audio: Fix irq/process data synchronization ALSA: hda - Apply asus-mode8 fixup to ASUS X71SL ALSA: hda - Fix up GPIO for ASUS ROG Ranger ALSA: firewire-lib: change structure member with proper type ALSA: firewire-tascam: Fix to handle error from initialization of stream data ALSA: fireworks: fix asymmetric API call at unit removal
2017-01-06Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "One fix for a broken driver on Renesas RZ/A1 SoCs with bootloaders that don't turn all the clks on and another fix for stm32f4 SoCs where we have multiple drivers attaching to the same DT node" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: stm32f4: Use CLK_OF_DECLARE_DRIVER initialization method clk: renesas: mstp: Support 8-bit registers for r7s72100
2017-01-06Merge tag 'hwmon-for-linus-v4.10-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Fix temp1_max_alarm attribute in lm90 driver" * tag 'hwmon-for-linus-v4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (lm90) fix temp1_max_alarm attribute
2017-01-06Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Radim Krčmář: "MIPS: - fix host kernel crashes when receiving a signal with 64-bit userspace - flush instruction cache on all vcpus after generating entry code (both for stable) x86: - fix NULL dereference in MMU caused by SMM transitions (for stable) - correct guest instruction pointer after emulating some VMX errors - minor cleanup" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: remove duplicated declaration KVM: MIPS: Flush KVM entry code from icache globally KVM: MIPS: Don't clobber CP0_Status.UX KVM: x86: reset MMU on KVM_SET_VCPU_EVENTS KVM: nVMX: fix instruction skipping during emulated vm-entry
2017-01-06Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - re-introduce the arm64 get_current() optimisation - KERN_CONT fallout fix in show_pte() * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: restore get_current() optimisation arm64: mm: fix show_pte KERN_CONT fallout
2017-01-06drm/amdgpu: drop verde dpm quirksAlex Deucher
Port of radeon change to amdgpu. Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2017-01-06drm/radeon: drop verde dpm quirksAlex Deucher
fixes: https://bugs.freedesktop.org/show_bug.cgi?id=98897 https://bugs.launchpad.net/bugs/1651981 Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Cc: Adrian Fiergolski <A.Fiergolski@gmail.com>
2017-01-06drm/radeon: update smc firmware selection for SIAlex Deucher
Use the appropriate smc firmware for each chip revision. Using the wrong one can cause stability issues. Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2017-01-06drm/amdgpu: update si kicker smc firmwareFlora Cui
Use the appropriate smc firmware for each chip revision. Using the wrong one can cause stability issues. Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org