summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-11-20NFSv4.1: Fix the CREATE_SESSION slot number accountingTrond Myklebust
commit b519d408ea32040b1c7e10b155a3ee9a36660947 upstream. Ensure that we conform to the algorithm described in RFC5661, section 18.36.4 for when to bump the sequence id. In essence we do it for all cases except when the RPC call timed out, or in case of the server returning NFS4ERR_DELAY or NFS4ERR_STALE_CLIENTID. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> [bwh: Backported to 3.2: - Add the 'out' label - Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20mtd: nand: davinci: Reinitialize the HW ECC engine in 4bit hwctlKarl Beldan
commit f6d7c1b5598b6407c3f1da795dd54acf99c1990c upstream. This fixes subpage writes when using 4-bit HW ECC. There has been numerous reports about ECC errors with devices using this driver for a while. Also the 4-bit ECC has been reported as broken with subpages in [1] and with 16 bits NANDs in the driver and in mach* board files both in mainline and in the vendor BSPs. What I saw with 4-bit ECC on a 16bits NAND (on an LCDK) which got me to try reinitializing the ECC engine: - R/W on whole pages properly generates/checks RS code - try writing the 1st subpage only of a blank page, the subpage is well written and the RS code properly generated, re-reading the same page the HW detects some ECC error, reading the same page again no ECC error is detected Note that the ECC engine is already reinitialized in the 1-bit case. Tested on my LCDK with UBI+UBIFS using subpages. This could potentially get rid of the issue workarounded in [1]. [1] 28c015a9daab ("mtd: davinci-nand: disable subpage write for keystone-nand") Fixes: 6a4123e581b3 ("mtd: nand: davinci_nand, 4-bit ECC for smallpage") Signed-off-by: Karl Beldan <kbeldan@baylibre.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20asm-generic: make copy_from_user() zero the destination properlyAl Viro
commit 2545e5da080b4839dd859e3b09343a884f6ab0e3 upstream. ... in all cases, including the failing access_ok() Note that some architectures using asm-generic/uaccess.h have __copy_from_user() not zeroing the tail on failure halfway through. This variant works either way. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20alpha: fix copy_from_user()Al Viro
commit 2561d309dfd1555e781484af757ed0115035ddb3 upstream. it should clear the destination even when access_ok() fails. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20xfrm_user: propagate sec ctx allocation errorsMathias Krause
commit 2f30ea5090cbc57ea573cdc66421264b3de3fb0a upstream. When we fail to attach the security context in xfrm_state_construct() we'll return 0 as error value which, in turn, will wrongly claim success to userland when, in fact, we won't be adding / updating the XFRM state. This is a regression introduced by commit fd21150a0fe1 ("[XFRM] netlink: Inline attach_encap_tmpl(), attach_sec_ctx(), and attach_one_addr()"). Fix it by propagating the error returned by security_xfrm_state_alloc() in this case. Fixes: fd21150a0fe1 ("[XFRM] netlink: Inline attach_encap_tmpl()...") Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20ALSA: rawmidi: Fix possible deadlock with virmidi registrationTakashi Iwai
commit 816f318b2364262a51024096da7ca3b84e78e3b5 upstream. When a seq-virmidi driver is initialized, it registers a rawmidi instance with its callback to create an associated seq kernel client. Currently it's done throughly in rawmidi's register_mutex context. Recently it was found that this may lead to a deadlock another rawmidi device that is being attached with the sequencer is accessed, as both open with the same register_mutex. This was actually triggered by syzkaller, as Dmitry Vyukov reported: ====================================================== [ INFO: possible circular locking dependency detected ] 4.8.0-rc1+ #11 Not tainted ------------------------------------------------------- syz-executor/7154 is trying to acquire lock: (register_mutex#5){+.+.+.}, at: [<ffffffff84fd6d4b>] snd_rawmidi_kernel_open+0x4b/0x260 sound/core/rawmidi.c:341 but task is already holding lock: (&grp->list_mutex){++++.+}, at: [<ffffffff850138bb>] check_and_subscribe_port+0x5b/0x5c0 sound/core/seq/seq_ports.c:495 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&grp->list_mutex){++++.+}: [<ffffffff8147a3a8>] lock_acquire+0x208/0x430 kernel/locking/lockdep.c:3746 [<ffffffff863f6199>] down_read+0x49/0xc0 kernel/locking/rwsem.c:22 [< inline >] deliver_to_subscribers sound/core/seq/seq_clientmgr.c:681 [<ffffffff85005c5e>] snd_seq_deliver_event+0x35e/0x890 sound/core/seq/seq_clientmgr.c:822 [<ffffffff85006e96>] > snd_seq_kernel_client_dispatch+0x126/0x170 sound/core/seq/seq_clientmgr.c:2418 [<ffffffff85012c52>] snd_seq_system_broadcast+0xb2/0xf0 sound/core/seq/seq_system.c:101 [<ffffffff84fff70a>] snd_seq_create_kernel_client+0x24a/0x330 sound/core/seq/seq_clientmgr.c:2297 [< inline >] snd_virmidi_dev_attach_seq sound/core/seq/seq_virmidi.c:383 [<ffffffff8502d29f>] snd_virmidi_dev_register+0x29f/0x750 sound/core/seq/seq_virmidi.c:450 [<ffffffff84fd208c>] snd_rawmidi_dev_register+0x30c/0xd40 sound/core/rawmidi.c:1645 [<ffffffff84f816d3>] __snd_device_register.part.0+0x63/0xc0 sound/core/device.c:164 [< inline >] __snd_device_register sound/core/device.c:162 [<ffffffff84f8235d>] snd_device_register_all+0xad/0x110 sound/core/device.c:212 [<ffffffff84f7546f>] snd_card_register+0xef/0x6c0 sound/core/init.c:749 [<ffffffff85040b7f>] snd_virmidi_probe+0x3ef/0x590 sound/drivers/virmidi.c:123 [<ffffffff833ebf7b>] platform_drv_probe+0x8b/0x170 drivers/base/platform.c:564 ...... -> #0 (register_mutex#5){+.+.+.}: [< inline >] check_prev_add kernel/locking/lockdep.c:1829 [< inline >] check_prevs_add kernel/locking/lockdep.c:1939 [< inline >] validate_chain kernel/locking/lockdep.c:2266 [<ffffffff814791f4>] __lock_acquire+0x4d44/0x4d80 kernel/locking/lockdep.c:3335 [<ffffffff8147a3a8>] lock_acquire+0x208/0x430 kernel/locking/lockdep.c:3746 [< inline >] __mutex_lock_common kernel/locking/mutex.c:521 [<ffffffff863f0ef1>] mutex_lock_nested+0xb1/0xa20 kernel/locking/mutex.c:621 [<ffffffff84fd6d4b>] snd_rawmidi_kernel_open+0x4b/0x260 sound/core/rawmidi.c:341 [<ffffffff8502e7c7>] midisynth_subscribe+0xf7/0x350 sound/core/seq/seq_midi.c:188 [< inline >] subscribe_port sound/core/seq/seq_ports.c:427 [<ffffffff85013cc7>] check_and_subscribe_port+0x467/0x5c0 sound/core/seq/seq_ports.c:510 [<ffffffff85015da9>] snd_seq_port_connect+0x2c9/0x500 sound/core/seq/seq_ports.c:579 [<ffffffff850079b8>] snd_seq_ioctl_subscribe_port+0x1d8/0x2b0 sound/core/seq/seq_clientmgr.c:1480 [<ffffffff84ffe9e4>] snd_seq_do_ioctl+0x184/0x1e0 sound/core/seq/seq_clientmgr.c:2225 [<ffffffff84ffeae8>] snd_seq_kernel_client_ctl+0xa8/0x110 sound/core/seq/seq_clientmgr.c:2440 [<ffffffff85027664>] snd_seq_oss_midi_open+0x3b4/0x610 sound/core/seq/oss/seq_oss_midi.c:375 [<ffffffff85023d67>] snd_seq_oss_synth_setup_midi+0x107/0x4c0 sound/core/seq/oss/seq_oss_synth.c:281 [<ffffffff8501b0a8>] snd_seq_oss_open+0x748/0x8d0 sound/core/seq/oss/seq_oss_init.c:274 [<ffffffff85019d8a>] odev_open+0x6a/0x90 sound/core/seq/oss/seq_oss.c:138 [<ffffffff84f7040f>] soundcore_open+0x30f/0x640 sound/sound_core.c:639 ...... other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&grp->list_mutex); lock(register_mutex#5); lock(&grp->list_mutex); lock(register_mutex#5); *** DEADLOCK *** ====================================================== The fix is to simply move the registration parts in snd_rawmidi_dev_register() to the outside of the register_mutex lock. The lock is needed only to manage the linked list, and it's not necessarily to cover the whole initialization process. Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20ALSA: timer: Fix zero-division by continue of uninitialized instanceTakashi Iwai
commit 9f8a7658bcafb2a7853f7a2eae8a94e87e6e695b upstream. When a user timer instance is continued without the explicit start beforehand, the system gets eventually zero-division error like: divide error: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN CPU: 1 PID: 27320 Comm: syz-executor Not tainted 4.8.0-rc3-next-20160825+ #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff88003c9b2280 task.stack: ffff880027280000 RIP: 0010:[<ffffffff858e1a6c>] [< inline >] ktime_divns include/linux/ktime.h:195 RIP: 0010:[<ffffffff858e1a6c>] [<ffffffff858e1a6c>] snd_hrtimer_callback+0x1bc/0x3c0 sound/core/hrtimer.c:62 Call Trace: <IRQ> [< inline >] __run_hrtimer kernel/time/hrtimer.c:1238 [<ffffffff81504335>] __hrtimer_run_queues+0x325/0xe70 kernel/time/hrtimer.c:1302 [<ffffffff81506ceb>] hrtimer_interrupt+0x18b/0x420 kernel/time/hrtimer.c:1336 [<ffffffff8126d8df>] local_apic_timer_interrupt+0x6f/0xe0 arch/x86/kernel/apic/apic.c:933 [<ffffffff86e13056>] smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:957 [<ffffffff86e1210c>] apic_timer_interrupt+0x8c/0xa0 arch/x86/entry/entry_64.S:487 <EOI> ..... Although a similar issue was spotted and a fix patch was merged in commit [6b760bb2c63a: ALSA: timer: fix division by zero after SNDRV_TIMER_IOCTL_CONTINUE], it seems covering only a part of iceberg. In this patch, we fix the issue a bit more drastically. Basically the continue of an uninitialized timer is supposed to be a fresh start, so we do it for user timers. For the direct snd_timer_continue() call, there is no way to pass the initial tick value, so we kick out for the uninitialized case. Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> [bwh: Backported to 3.2: - Adjust context - In _snd_timer_stop(), check the value of 'event' instead of 'stop'] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20ALSA: timer: Code cleanupTakashi Iwai
commit c3b1681375dc6e71d89a3ae00cc3ce9e775a8917 upstream. This is a minor code cleanup without any functional changes: - Kill keep_flag argument from _snd_timer_stop(), as all callers pass only it false. - Remove redundant NULL check in _snd_timer_stop(). Signed-off-by: Takashi Iwai <tiwai@suse.de> [bwh: Backported to 3.2: adjust to apply after previously backported "ALSA: timer: Fix race between stop and interrupt"] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20crypto: cryptd - initialize child shash_desc on importArd Biesheuvel
commit 0bd2223594a4dcddc1e34b15774a3a4776f7749e upstream. When calling .import() on a cryptd ahash_request, the structure members that describe the child transform in the shash_desc need to be initialized like they are when calling .init() Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20sched/core: Fix a race between try_to_wake_up() and a woken up taskBalbir Singh
commit 135e8c9250dd5c8c9aae5984fde6f230d0cbfeaf upstream. The origin of the issue I've seen is related to a missing memory barrier between check for task->state and the check for task->on_rq. The task being woken up is already awake from a schedule() and is doing the following: do { schedule() set_current_state(TASK_(UN)INTERRUPTIBLE); } while (!cond); The waker, actually gets stuck doing the following in try_to_wake_up(): while (p->on_cpu) cpu_relax(); Analysis: The instance I've seen involves the following race: CPU1 CPU2 while () { if (cond) break; do { schedule(); set_current_state(TASK_UN..) } while (!cond); wakeup_routine() spin_lock_irqsave(wait_lock) raw_spin_lock_irqsave(wait_lock) wake_up_process() } try_to_wake_up() set_current_state(TASK_RUNNING); .. list_del(&waiter.list); CPU2 wakes up CPU1, but before it can get the wait_lock and set current state to TASK_RUNNING the following occurs: CPU3 wakeup_routine() raw_spin_lock_irqsave(wait_lock) if (!list_empty) wake_up_process() try_to_wake_up() raw_spin_lock_irqsave(p->pi_lock) .. if (p->on_rq && ttwu_wakeup()) .. while (p->on_cpu) cpu_relax() .. CPU3 tries to wake up the task on CPU1 again since it finds it on the wait_queue, CPU1 is spinning on wait_lock, but immediately after CPU2, CPU3 got it. CPU3 checks the state of p on CPU1, it is TASK_UNINTERRUPTIBLE and the task is spinning on the wait_lock. Interestingly since p->on_rq is checked under pi_lock, I've noticed that try_to_wake_up() finds p->on_rq to be 0. This was the most confusing bit of the analysis, but p->on_rq is changed under runqueue lock, rq_lock, the p->on_rq check is not reliable without this fix IMHO. The race is visible (based on the analysis) only when ttwu_queue() does a remote wakeup via ttwu_queue_remote. In which case the p->on_rq change is not done uder the pi_lock. The result is that after a while the entire system locks up on the raw_spin_irqlock_save(wait_lock) and the holder spins infintely Reproduction of the issue: The issue can be reproduced after a long run on my system with 80 threads and having to tweak available memory to very low and running memory stress-ng mmapfork test. It usually takes a long time to reproduce. I am trying to work on a test case that can reproduce the issue faster, but thats work in progress. I am still testing the changes on my still in a loop and the tests seem OK thus far. Big thanks to Benjamin and Nick for helping debug this as well. Ben helped catch the missing barrier, Nick caught every missing bit in my theory. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [ Updated comment to clarify matching barriers. Many architectures do not have a full barrier in switch_to() so that cannot be relied upon. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nicholas Piggin <nicholas.piggin@gmail.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/e02cce7b-d9ca-1ad0-7a61-ea97c7582b37@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20iio: accel: kxsd9: Fix scaling bugLinus Walleij
commit 307fe9dd11ae44d4f8881ee449a7cbac36e1f5de upstream. All the scaling of the KXSD9 involves multiplication with a fraction number < 1. However the scaling value returned from IIO_INFO_SCALE was unpredictable as only the micros of the value was assigned, and not the integer part, resulting in scaling like this: $cat in_accel_scale -1057462640.011978 Fix this by assigning zero to the integer part. Tested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org> [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20IB/ipoib: Fix memory corruption in ipoib cm mode connect flowErez Shitrit
commit 546481c2816ea3c061ee9d5658eb48070f69212e upstream. When a new CM connection is being requested, ipoib driver copies data from the path pointer in the CM/tx object, the path object might be invalid at the point and memory corruption will happened later when now the CM driver will try using that data. The next scenario demonstrates it: neigh_add_path --> ipoib_cm_create_tx --> queue_work (pointer to path is in the cm/tx struct) #while the work is still in the queue, #the port goes down and causes the ipoib_flush_paths: ipoib_flush_paths --> path_free --> kfree(path) #at this point the work scheduled starts. ipoib_cm_tx_start --> copy from the (invalid)path pointer: (memcpy(&pathrec, &p->path->pathrec, sizeof pathrec);) -> memory corruption. To fix that the driver now starts the CM/tx connection only if that specific path exists in the general paths database. This check is protected with the relevant locks, and uses the gid from the neigh member in the CM/tx object which is valid according to the ref count that was taken by the CM/tx. Fixes: 839fcaba35 ('IPoIB: Connected mode experimental support') Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com> [bwh: Backported to 3.2: s/neigh->daddr/neigh->neighbour->ha/] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20IB/core: Fix use after free in send_leave functionErez Shitrit
commit 68c6bcdd8bd00394c234b915ab9b97c74104130c upstream. The function send_leave sets the member: group->query_id (group->query_id = ret) after calling the sa_query, but leave_handler can be executed before the setting and it might delete the group object, and will get a memory corruption. Additionally, this patch gets rid of group->query_id variable which is not used. Fixes: faec2f7b96b5 ('IB/sa: Track multicast join/leave requests') Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20x86/paravirt: Do not trace _paravirt_ident_*() functionsSteven Rostedt
commit 15301a570754c7af60335d094dd2d1808b0641a5 upstream. Łukasz Daniluk reported that on a RHEL kernel that his machine would lock up after enabling function tracer. I asked him to bisect the functions within available_filter_functions, which he did and it came down to three: _paravirt_nop(), _paravirt_ident_32() and _paravirt_ident_64() It was found that this is only an issue when noreplace-paravirt is added to the kernel command line. This means that those functions are most likely called within critical sections of the funtion tracer, and must not be traced. In newer kenels _paravirt_nop() is defined within gcc asm(), and is no longer an issue. But both _paravirt_ident_{32,64}() causes the following splat when they are traced: mm/pgtable-generic.c:33: bad pmd ffff8800d2435150(0000000001d00054) mm/pgtable-generic.c:33: bad pmd ffff8800d3624190(0000000001d00070) mm/pgtable-generic.c:33: bad pmd ffff8800d36a5110(0000000001d00054) mm/pgtable-generic.c:33: bad pmd ffff880118eb1450(0000000001d00054) NMI watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [systemd-journal:469] Modules linked in: e1000e CPU: 2 PID: 469 Comm: systemd-journal Not tainted 4.6.0-rc4-test+ #513 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012 task: ffff880118f740c0 ti: ffff8800d4aec000 task.ti: ffff8800d4aec000 RIP: 0010:[<ffffffff81134148>] [<ffffffff81134148>] queued_spin_lock_slowpath+0x118/0x1a0 RSP: 0018:ffff8800d4aefb90 EFLAGS: 00000246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88011eb16d40 RDX: ffffffff82485760 RSI: 000000001f288820 RDI: ffffea0000008030 RBP: ffff8800d4aefb90 R08: 00000000000c0000 R09: 0000000000000000 R10: ffffffff821c8e0e R11: 0000000000000000 R12: ffff880000200fb8 R13: 00007f7a4e3f7000 R14: ffffea000303f600 R15: ffff8800d4b562e0 FS: 00007f7a4e3d7840(0000) GS:ffff88011eb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7a4e3f7000 CR3: 00000000d3e71000 CR4: 00000000001406e0 Call Trace: _raw_spin_lock+0x27/0x30 handle_pte_fault+0x13db/0x16b0 handle_mm_fault+0x312/0x670 __do_page_fault+0x1b1/0x4e0 do_page_fault+0x22/0x30 page_fault+0x28/0x30 __vfs_read+0x28/0xe0 vfs_read+0x86/0x130 SyS_read+0x46/0xa0 entry_SYSCALL_64_fastpath+0x1e/0xa8 Code: 12 48 c1 ea 0c 83 e8 01 83 e2 30 48 98 48 81 c2 40 6d 01 00 48 03 14 c5 80 6a 5d 82 48 89 0a 8b 41 08 85 c0 75 09 f3 90 8b 41 08 <85> c0 74 f7 4c 8b 09 4d 85 c9 74 08 41 0f 18 09 eb 02 f3 90 8b Reported-by: Łukasz Daniluk <lukasz.daniluk@intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20ALSA: timer: fix NULL pointer dereference in read()/ioctl() raceVegard Nossum
commit 11749e086b2766cccf6217a527ef5c5604ba069c upstream. I got this with syzkaller: ================================================================== BUG: KASAN: null-ptr-deref on address 0000000000000020 Read of size 32 by task syz-executor/22519 CPU: 1 PID: 22519 Comm: syz-executor Not tainted 4.8.0-rc2+ #169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2 014 0000000000000001 ffff880111a17a00 ffffffff81f9f141 ffff880111a17a90 ffff880111a17c50 ffff880114584a58 ffff880114584a10 ffff880111a17a80 ffffffff8161fe3f ffff880100000000 ffff880118d74a48 ffff880118d74a68 Call Trace: [<ffffffff81f9f141>] dump_stack+0x83/0xb2 [<ffffffff8161fe3f>] kasan_report_error+0x41f/0x4c0 [<ffffffff8161ff74>] kasan_report+0x34/0x40 [<ffffffff82c84b54>] ? snd_timer_user_read+0x554/0x790 [<ffffffff8161e79e>] check_memory_region+0x13e/0x1a0 [<ffffffff8161e9c1>] kasan_check_read+0x11/0x20 [<ffffffff82c84b54>] snd_timer_user_read+0x554/0x790 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff817d0831>] ? proc_fault_inject_write+0x1c1/0x250 [<ffffffff817d0670>] ? next_tgid+0x2a0/0x2a0 [<ffffffff8127c278>] ? do_group_exit+0x108/0x330 [<ffffffff8174653a>] ? fsnotify+0x72a/0xca0 [<ffffffff81674dfe>] __vfs_read+0x10e/0x550 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff81674cf0>] ? do_sendfile+0xc50/0xc50 [<ffffffff81745e10>] ? __fsnotify_update_child_dentry_flags+0x60/0x60 [<ffffffff8143fec6>] ? kcov_ioctl+0x56/0x190 [<ffffffff81e5ada2>] ? common_file_perm+0x2e2/0x380 [<ffffffff81746b0e>] ? __fsnotify_parent+0x5e/0x2b0 [<ffffffff81d93536>] ? security_file_permission+0x86/0x1e0 [<ffffffff816728f5>] ? rw_verify_area+0xe5/0x2b0 [<ffffffff81675355>] vfs_read+0x115/0x330 [<ffffffff81676371>] SyS_read+0xd1/0x1a0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff82001c2c>] ? __this_cpu_preempt_check+0x1c/0x20 [<ffffffff8150455a>] ? __context_tracking_exit.part.4+0x3a/0x1e0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0 [<ffffffff810052fc>] ? syscall_return_slowpath+0x16c/0x1d0 [<ffffffff83c3276a>] entry_SYSCALL64_slow_path+0x25/0x25 ================================================================== There are a couple of problems that I can see: - ioctl(SNDRV_TIMER_IOCTL_SELECT), which potentially sets tu->queue/tu->tqueue to NULL on memory allocation failure, so read() would get a NULL pointer dereference like the above splat - the same ioctl() can free tu->queue/to->tqueue which means read() could potentially see (and dereference) the freed pointer We can fix both by taking the ioctl_lock mutex when dereferencing ->queue/->tqueue, since that's always held over all the ioctl() code. Just looking at the code I find it likely that there are more problems here such as tu->qhead pointing outside the buffer if the size is changed concurrently using SNDRV_TIMER_IOCTL_PARAMS. Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20ALSA: timer: fix NULL pointer dereference on memory allocation failureVegard Nossum
commit 8ddc05638ee42b18ba4fe99b5fb647fa3ad20456 upstream. I hit this with syzkaller: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 1327 Comm: a.out Not tainted 4.8.0-rc2+ #190 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 task: ffff88011278d600 task.stack: ffff8801120c0000 RIP: 0010:[<ffffffff82c8ba07>] [<ffffffff82c8ba07>] snd_hrtimer_start+0x77/0x100 RSP: 0018:ffff8801120c7a60 EFLAGS: 00010006 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000007 RDX: 0000000000000009 RSI: 1ffff10023483091 RDI: 0000000000000048 RBP: ffff8801120c7a78 R08: ffff88011a5cf768 R09: ffff88011a5ba790 R10: 0000000000000002 R11: ffffed00234b9ef1 R12: ffff880114843980 R13: ffffffff84213c00 R14: ffff880114843ab0 R15: 0000000000000286 FS: 00007f72958f3700(0000) GS:ffff88011aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000603001 CR3: 00000001126ab000 CR4: 00000000000006f0 Stack: ffff880114843980 ffff880111eb2dc0 ffff880114843a34 ffff8801120c7ad0 ffffffff82c81ab1 0000000000000000 ffffffff842138e0 0000000100000000 ffff880111eb2dd0 ffff880111eb2dc0 0000000000000001 ffff880111eb2dc0 Call Trace: [<ffffffff82c81ab1>] snd_timer_start1+0x331/0x670 [<ffffffff82c85bfd>] snd_timer_start+0x5d/0xa0 [<ffffffff82c8795e>] snd_timer_user_ioctl+0x88e/0x2830 [<ffffffff8159f3a0>] ? __follow_pte.isra.49+0x430/0x430 [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80 [<ffffffff815a26fa>] ? do_wp_page+0x3aa/0x1c90 [<ffffffff8132762f>] ? put_prev_entity+0x108f/0x21a0 [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80 [<ffffffff816b0733>] do_vfs_ioctl+0x193/0x1050 [<ffffffff813510af>] ? cpuacct_account_field+0x12f/0x1a0 [<ffffffff816b05a0>] ? ioctl_preallocate+0x200/0x200 [<ffffffff81002f2f>] ? syscall_trace_enter+0x3cf/0xdb0 [<ffffffff815045ba>] ? __context_tracking_exit.part.4+0x9a/0x1e0 [<ffffffff81002b60>] ? exit_to_usermode_loop+0x190/0x190 [<ffffffff82001a97>] ? check_preemption_disabled+0x37/0x1e0 [<ffffffff81d93889>] ? security_file_ioctl+0x89/0xb0 [<ffffffff816b167f>] SyS_ioctl+0x8f/0xc0 [<ffffffff816b15f0>] ? do_vfs_ioctl+0x1050/0x1050 [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0 [<ffffffff83c32b2a>] entry_SYSCALL64_slow_path+0x25/0x25 Code: c7 c7 c4 b9 c8 82 48 89 d9 4c 89 ee e8 63 88 7f fe e8 7e 46 7b fe 48 8d 7b 48 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 04 84 c0 7e 65 80 7b 48 00 74 0e e8 52 46 RIP [<ffffffff82c8ba07>] snd_hrtimer_start+0x77/0x100 RSP <ffff8801120c7a60> ---[ end trace 5955b08db7f2b029 ]--- This can happen if snd_hrtimer_open() fails to allocate memory and returns an error, which is currently not checked by snd_timer_open(): ioctl(SNDRV_TIMER_IOCTL_SELECT) - snd_timer_user_tselect() - snd_timer_close() - snd_hrtimer_close() - (struct snd_timer *) t->private_data = NULL - snd_timer_open() - snd_hrtimer_open() - kzalloc() fails; t->private_data is still NULL ioctl(SNDRV_TIMER_IOCTL_START) - snd_timer_user_start() - snd_timer_start() - snd_timer_start1() - snd_hrtimer_start() - t->private_data == NULL // boom Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> [bwh: Backported to 3.2: don't put_device() since snd_timer_instance_new() doesn't take a device reference] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20ALSA: timer: fix division by zero after SNDRV_TIMER_IOCTL_CONTINUEVegard Nossum
commit 6b760bb2c63a9e322c0e4a0b5daf335ad93d5a33 upstream. I got this: divide error: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 1327 Comm: a.out Not tainted 4.8.0-rc2+ #189 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 task: ffff8801120a9580 task.stack: ffff8801120b0000 RIP: 0010:[<ffffffff82c8bd9a>] [<ffffffff82c8bd9a>] snd_hrtimer_callback+0x1da/0x3f0 RSP: 0018:ffff88011aa87da8 EFLAGS: 00010006 RAX: 0000000000004f76 RBX: ffff880112655e88 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff880112655ea0 RDI: 0000000000000001 RBP: ffff88011aa87e00 R08: ffff88013fff905c R09: ffff88013fff9048 R10: ffff88013fff9050 R11: 00000001050a7b8c R12: ffff880114778a00 R13: ffff880114778ab4 R14: ffff880114778b30 R15: 0000000000000000 FS: 00007f071647c700(0000) GS:ffff88011aa80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000603001 CR3: 0000000112021000 CR4: 00000000000006e0 Stack: 0000000000000000 ffff880114778ab8 ffff880112655ea0 0000000000004f76 ffff880112655ec8 ffff880112655e80 ffff880112655e88 ffff88011aa98fc0 00000000b97ccf2b dffffc0000000000 ffff88011aa98fc0 ffff88011aa87ef0 Call Trace: <IRQ> [<ffffffff813abce7>] __hrtimer_run_queues+0x347/0xa00 [<ffffffff82c8bbc0>] ? snd_hrtimer_close+0x130/0x130 [<ffffffff813ab9a0>] ? retrigger_next_event+0x1b0/0x1b0 [<ffffffff813ae1a6>] ? hrtimer_interrupt+0x136/0x4b0 [<ffffffff813ae220>] hrtimer_interrupt+0x1b0/0x4b0 [<ffffffff8120f91e>] local_apic_timer_interrupt+0x6e/0xf0 [<ffffffff81227ad3>] ? kvm_guest_apic_eoi_write+0x13/0xc0 [<ffffffff83c35086>] smp_apic_timer_interrupt+0x76/0xa0 [<ffffffff83c3416c>] apic_timer_interrupt+0x8c/0xa0 <EOI> [<ffffffff83c3239c>] ? _raw_spin_unlock_irqrestore+0x2c/0x60 [<ffffffff82c8185d>] snd_timer_start1+0xdd/0x670 [<ffffffff82c87015>] snd_timer_continue+0x45/0x80 [<ffffffff82c88100>] snd_timer_user_ioctl+0x1030/0x2830 [<ffffffff8159f3a0>] ? __follow_pte.isra.49+0x430/0x430 [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80 [<ffffffff815a26fa>] ? do_wp_page+0x3aa/0x1c90 [<ffffffff815aa4f8>] ? handle_mm_fault+0xbc8/0x27f0 [<ffffffff815a9930>] ? __pmd_alloc+0x370/0x370 [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80 [<ffffffff816b0733>] do_vfs_ioctl+0x193/0x1050 [<ffffffff816b05a0>] ? ioctl_preallocate+0x200/0x200 [<ffffffff81002f2f>] ? syscall_trace_enter+0x3cf/0xdb0 [<ffffffff815045ba>] ? __context_tracking_exit.part.4+0x9a/0x1e0 [<ffffffff81002b60>] ? exit_to_usermode_loop+0x190/0x190 [<ffffffff82001a97>] ? check_preemption_disabled+0x37/0x1e0 [<ffffffff81d93889>] ? security_file_ioctl+0x89/0xb0 [<ffffffff816b167f>] SyS_ioctl+0x8f/0xc0 [<ffffffff816b15f0>] ? do_vfs_ioctl+0x1050/0x1050 [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0 [<ffffffff83c32b2a>] entry_SYSCALL64_slow_path+0x25/0x25 Code: e8 fc 42 7b fe 8b 0d 06 8a 50 03 49 0f af cf 48 85 c9 0f 88 7c 01 00 00 48 89 4d a8 e8 e0 42 7b fe 48 8b 45 c0 48 8b 4d a8 48 99 <48> f7 f9 49 01 c7 e8 cb 42 7b fe 48 8b 55 d0 48 b8 00 00 00 00 RIP [<ffffffff82c8bd9a>] snd_hrtimer_callback+0x1da/0x3f0 RSP <ffff88011aa87da8> ---[ end trace 6aa380f756a21074 ]--- The problem happens when you call ioctl(SNDRV_TIMER_IOCTL_CONTINUE) on a completely new/unused timer -- it will have ->sticks == 0, which causes a divide by 0 in snd_hrtimer_callback(). Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20fs/seq_file: fix out-of-bounds readVegard Nossum
commit 088bf2ff5d12e2e32ee52a4024fec26e582f44d3 upstream. seq_read() is a nasty piece of work, not to mention buggy. It has (I think) an old bug which allows unprivileged userspace to read beyond the end of m->buf. I was getting these: BUG: KASAN: slab-out-of-bounds in seq_read+0xcd2/0x1480 at addr ffff880116889880 Read of size 2713 by task trinity-c2/1329 CPU: 2 PID: 1329 Comm: trinity-c2 Not tainted 4.8.0-rc1+ #96 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 Call Trace: kasan_object_err+0x1c/0x80 kasan_report_error+0x2cb/0x7e0 kasan_report+0x4e/0x80 check_memory_region+0x13e/0x1a0 kasan_check_read+0x11/0x20 seq_read+0xcd2/0x1480 proc_reg_read+0x10b/0x260 do_loop_readv_writev.part.5+0x140/0x2c0 do_readv_writev+0x589/0x860 vfs_readv+0x7b/0xd0 do_readv+0xd8/0x2c0 SyS_readv+0xb/0x10 do_syscall_64+0x1b3/0x4b0 entry_SYSCALL64_slow_path+0x25/0x25 Object at ffff880116889100, in cache kmalloc-4096 size: 4096 Allocated: PID = 1329 save_stack_trace+0x26/0x80 save_stack+0x46/0xd0 kasan_kmalloc+0xad/0xe0 __kmalloc+0x1aa/0x4a0 seq_buf_alloc+0x35/0x40 seq_read+0x7d8/0x1480 proc_reg_read+0x10b/0x260 do_loop_readv_writev.part.5+0x140/0x2c0 do_readv_writev+0x589/0x860 vfs_readv+0x7b/0xd0 do_readv+0xd8/0x2c0 SyS_readv+0xb/0x10 do_syscall_64+0x1b3/0x4b0 return_from_SYSCALL_64+0x0/0x6a Freed: PID = 0 (stack is not available) Memory state around the buggy address: ffff88011688a000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88011688a080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff88011688a100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff88011688a180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88011688a200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Disabling lock debugging due to kernel taint This seems to be the same thing that Dave Jones was seeing here: https://lkml.org/lkml/2016/8/12/334 There are multiple issues here: 1) If we enter the function with a non-empty buffer, there is an attempt to flush it. But it was not clearing m->from after doing so, which means that if we try to do this flush twice in a row without any call to traverse() in between, we are going to be reading from the wrong place -- the splat above, fixed by this patch. 2) If there's a short write to userspace because of page faults, the buffer may already contain multiple lines (i.e. pos has advanced by more than 1), but we don't save the progress that was made so the next call will output what we've already returned previously. Since that is a much less serious issue (and I have a headache after staring at seq_read() for the past 8 hours), I'll leave that for now. Link: http://lkml.kernel.org/r/1471447270-32093-1-git-send-email-vegard.nossum@oracle.com Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Reported-by: Dave Jones <davej@codemonkey.org.uk> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20USB: serial: option: add WeTelecom 0x6802 and 0x6803 productsAleksandr Makarov
commit 40d9c32525cba79130612650b1abc47c0c0f19a8 upstream. These product IDs are listed in Windows driver. 0x6803 corresponds to WeTelecom WM-D300. 0x6802 name is unknown. Signed-off-by: Aleksandr Makarov <aleksandr.o.makarov@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20x86/apic: Do not init irq remapping if ioapic is disabledWanpeng Li
commit 2e63ad4bd5dd583871e6602f9d398b9322d358d9 upstream. native_smp_prepare_cpus -> default_setup_apic_routing -> enable_IR_x2apic -> irq_remapping_prepare -> intel_prepare_irq_remapping -> intel_setup_irq_remapping So IR table is setup even if "noapic" boot parameter is added. As a result we crash later when the interrupt affinity is set due to a half initialized remapping infrastructure. Prevent remap initialization when IOAPIC is disabled. Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Link: http://lkml.kernel.org/r/1471954039-3942-1-git-send-email-wanpeng.li@hotmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20ubifs: Fix assertion in layout_in_gaps()Vincent Stehlé
commit c0082e985fdf77b02fc9e0dac3b58504dcf11b7a upstream. An assertion in layout_in_gaps() verifies that the gap_lebs pointer is below the maximum bound. When computing this maximum bound the idx_lebs count is multiplied by sizeof(int), while C pointers arithmetic does take into account the size of the pointed elements implicitly already. Remove the multiplication to fix the assertion. Fixes: 1e51764a3c2ac05a ("UBIFS: add new flash file system") Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20USB: avoid left shift by -1Alan Stern
commit 53e5f36fbd2453ad69a3369a1db62dc06c30a4aa upstream. UBSAN complains about a left shift by -1 in proc_do_submiturb(). This can occur when an URB is submitted for a bulk or control endpoint on a high-speed device, since the code doesn't bother to check the endpoint type; normally only interrupt or isochronous endpoints have a nonzero bInterval value. Aside from the fact that the operation is illegal, it shouldn't matter because the result isn't used. Still, in theory it could cause a hardware exception or other problem, so we should work around it. This patch avoids doing the left shift unless the shift amount is >= 0. The same piece of code has another problem. When checking the device speed (the exponential encoding for interrupt endpoints is used only by high-speed or faster devices), we need to look for speed >= USB_SPEED_SUPER as well as speed == USB_SPEED HIGH. The patch adds this check. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Vittorio Zecca <zeccav@gmail.com> Tested-by: Vittorio Zecca <zeccav@gmail.com> Suggested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20USB: fix typo in wMaxPacketSize validationAlan Stern
commit 6c73358c83ce870c0cf32413e5cadb3b9a39c606 upstream. The maximum value allowed for wMaxPacketSize of a high-speed interrupt endpoint is 1024 bytes, not 1023. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Fixes: aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20usb: gadget: fsl_qe_udc: signedness bug in qe_get_frame()Dan Carpenter
commit f4693b08cc901912a87369c46537b94ed4084ea0 upstream. We can't assign -EINVAL to a u16. Fixes: 3948f0e0c999 ('usb: add Freescale QE/CPM USB peripheral controller driver') Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20drm: Reject page_flip for !DRIVER_MODESETDaniel Vetter
commit 6f00975c619064a18c23fd3aced325ae165a73b9 upstream. Somehow this one slipped through, which means drivers without modeset support can be oopsed (since those also don't call drm_mode_config_init, which means the crtc lookup will chase an uninitalized idr). Reported-by: Alexander Potapenko <glider@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20iio: accel: kxsd9: Fix raw read returnLinus Walleij
commit 7ac61a062f3147dc23e3f12b9dfe7c4dd35f9cb8 upstream. Any readings from the raw interface of the KXSD9 driver will return an empty string, because it does not return IIO_VAL_INT but rather some random value from the accelerometer to the caller. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org> [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20USB: serial: option: add WeTelecom WM-D200Aleksandr Makarov
commit 6695593e4a7659db49ac6eca98c164f7b5589f72 upstream. Add support for WeTelecom WM-D200. T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22de ProdID=6801 Rev=00.00 S: Manufacturer=WeTelecom Incorporated S: Product=WeTelecom Mobile Products C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Signed-off-by: Aleksandr Makarov <aleksandr.o.makarov@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20parisc: Fix order of EREFUSED define in errno.hHelge Deller
commit 3eb53b20d7bd1374598cfb1feaa081fcac0e76cd upstream. When building gccgo in userspace, errno.h gets parsed and the go include file sysinfo.go is generated. Since EREFUSED is defined to the same value as ECONNREFUSED, and ECONNREFUSED is defined later on in errno.h, this leads to go complaining that EREFUSED isn't defined yet. Fix this trivial problem by moving the define of EREFUSED down after ECONNREFUSED in errno.h (and clean up the indenting while touching this line). Signed-off-by: Helge Deller <deller@gmx.de> [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20Input: i8042 - set up shared ps2_cmd_mutex for AUX portsDmitry Torokhov
commit 47af45d684b5f3ae000ad448db02ce4f13f73273 upstream. The commit 4097461897df ("Input: i8042 - break load dependency ...") correctly set up ps2_cmd_mutex pointer for the KBD port but forgot to do the same for AUX port(s), which results in communication on KBD and AUX ports to clash with each other. Fixes: 4097461897df ("Input: i8042 - break load dependency ...") Reported-by: Bruno Wolff III <bruno@wolff.to> Tested-by: Bruno Wolff III <bruno@wolff.to> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20drm/radeon: fix radeon_move_blit on 32bit systemsChristian König
commit 13f479b9df4e2bbf2d16e7e1b02f3f55f70e2455 upstream. This bug seems to be present for a very long time. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20tcp: fix use after free in tcp_xmit_retransmit_queue()Eric Dumazet
commit bb1fceca22492109be12640d49f5ea5a544c6bb4 upstream. When tcp_sendmsg() allocates a fresh and empty skb, it puts it at the tail of the write queue using tcp_add_write_queue_tail() Then it attempts to copy user data into this fresh skb. If the copy fails, we undo the work and remove the fresh skb. Unfortunately, this undo lacks the change done to tp->highest_sack and we can leave a dangling pointer (to a freed skb) Later, tcp_xmit_retransmit_queue() can dereference this pointer and access freed memory. For regular kernels where memory is not unmapped, this might cause SACK bugs because tcp_highest_sack_seq() is buggy, returning garbage instead of tp->snd_nxt, but with various debug features like CONFIG_DEBUG_PAGEALLOC, this can crash the kernel. This bug was found by Marco Grassi thanks to syzkaller. Fixes: 6859d49475d4 ("[TCP]: Abstract tp->highest_sack accessing & point to next skb") Reported-by: Marco Grassi <marco.gra@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20xhci: don't dereference a xhci member after removing xhciMathias Nyman
commit f1f6d9a8b540df22b87a5bf6bc104edaade81f47 upstream. Remove the hcd after checking for the xhci last quirks, not before. This caused a hang on a Alpine Ridge xhci based maching which remove the whole xhci controller when unplugging the last usb device Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20usb: xhci: Fix panic if disconnectJim Lin
commit 88716a93766b8f095cdef37a8e8f2c93aa233b21 upstream. After a device is disconnected, xhci_stop_device() will be invoked in xhci_bus_suspend(). Also the "disconnect" IRQ will have ISR to invoke xhci_free_virt_device() in this sequence. xhci_irq -> xhci_handle_event -> handle_cmd_completion -> xhci_handle_cmd_disable_slot -> xhci_free_virt_device If xhci->devs[slot_id] has been assigned to NULL in xhci_free_virt_device(), then virt_dev->eps[i].ring in xhci_stop_device() may point to an invlid address to cause kernel panic. virt_dev = xhci->devs[slot_id]; : if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue) [] Unable to handle kernel paging request at virtual address 00001a68 [] pgd=ffffffc001430000 [] [00001a68] *pgd=000000013c807003, *pud=000000013c807003, *pmd=000000013c808003, *pte=0000000000000000 [] Internal error: Oops: 96000006 [#1] PREEMPT SMP [] CPU: 0 PID: 39 Comm: kworker/0:1 Tainted: G U [] Workqueue: pm pm_runtime_work [] task: ffffffc0bc0e0bc0 ti: ffffffc0bc0ec000 task.ti: ffffffc0bc0ec000 [] PC is at xhci_stop_device.constprop.11+0xb4/0x1a4 This issue is found when running with realtek ethernet device (0bda:8153). Signed-off-by: Jim Lin <jilin@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20cdc-acm: fix wrong pipe type on rx interrupt xfersGavin Li
commit add125054b8727103631dce116361668436ef6a7 upstream. This fixes the "BOGUS urb xfer" warning logged by usb_submit_urb(). Signed-off-by: Gavin Li <git@thegavinli.com> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20USB: serial: mos7840: fix non-atomic allocation in write pathAlexey Khoroshilov
commit 3b7c7e52efda0d4640060de747768360ba70a7c0 upstream. There is an allocation with GFP_KERNEL flag in mos7840_write(), while it may be called from interrupt context. Follow-up for commit 191252837626 ("USB: kobil_sct: fix non-atomic allocation in write path") Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Johan Hovold <johan@kernel.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20USB: serial: mos7720: fix non-atomic allocation in write pathAlexey Khoroshilov
commit 5a5a1d614287a647b36dff3f40c2b0ceabbc83ec upstream. There is an allocation with GFP_KERNEL flag in mos7720_write(), while it may be called from interrupt context. Follow-up for commit 191252837626 ("USB: kobil_sct: fix non-atomic allocation in write path") Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Johan Hovold <johan@kernel.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20megaraid_sas: Fix probing cards without io portYinghai Lu
commit e7f851684efb3377e9c93aca7fae6e76212e5680 upstream. Found one megaraid_sas HBA probe fails, [ 187.235190] scsi host2: Avago SAS based MegaRAID driver [ 191.112365] megaraid_sas 0000:89:00.0: BAR 0: can't reserve [io 0x0000-0x00ff] [ 191.120548] megaraid_sas 0000:89:00.0: IO memory region busy! and the card has resource like, [ 125.097714] pci 0000:89:00.0: [1000:005d] type 00 class 0x010400 [ 125.104446] pci 0000:89:00.0: reg 0x10: [io 0x0000-0x00ff] [ 125.110686] pci 0000:89:00.0: reg 0x14: [mem 0xce400000-0xce40ffff 64bit] [ 125.118286] pci 0000:89:00.0: reg 0x1c: [mem 0xce300000-0xce3fffff 64bit] [ 125.125891] pci 0000:89:00.0: reg 0x30: [mem 0xce200000-0xce2fffff pref] that does not io port resource allocated from BIOS, and kernel can not assign one as io port shortage. The driver is only looking for MEM, and should not fail. It turns out megasas_init_fw() etc are using bar index as mask. index 1 is used as mask 1, so that pci_request_selected_regions() is trying to request BAR0 instead of BAR1. Fix all related reference. Fixes: b6d5d8808b4c ("megaraid_sas: Use lowest memory bar for SR-IOV VF support") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20arm: oabi compat: add missing access checksDave Weinstein
commit 7de249964f5578e67b99699c5f0b405738d820a2 upstream. Add access checks to sys_oabi_epoll_wait() and sys_oabi_semtimedop(). This fixes CVE-2016-3857, a local privilege escalation under CONFIG_OABI_COMPAT. Reported-by: Chiachih Wu <wuchiachih@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Dave Weinstein <olorin@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20x86/mm: Disable preemption during CR3 read+writeSebastian Andrzej Siewior
commit 5cf0791da5c162ebc14b01eb01631cfa7ed4fa6e upstream. There's a subtle preemption race on UP kernels: Usually current->mm (and therefore mm->pgd) stays the same during the lifetime of a task so it does not matter if a task gets preempted during the read and write of the CR3. But then, there is this scenario on x86-UP: TaskA is in do_exit() and exit_mm() sets current->mm = NULL followed by: -> mmput() -> exit_mmap() -> tlb_finish_mmu() -> tlb_flush_mmu() -> tlb_flush_mmu_tlbonly() -> tlb_flush() -> flush_tlb_mm_range() -> __flush_tlb_up() -> __flush_tlb() -> __native_flush_tlb() At this point current->mm is NULL but current->active_mm still points to the "old" mm. Let's preempt taskA _after_ native_read_cr3() by taskB. TaskB has its own mm so CR3 has changed. Now preempt back to taskA. TaskA has no ->mm set so it borrows taskB's mm and so CR3 remains unchanged. Once taskA gets active it continues where it was interrupted and that means it writes its old CR3 value back. Everything is fine because userland won't need its memory anymore. Now the fun part: Let's preempt taskA one more time and get back to taskB. This time switch_mm() won't do a thing because oldmm (->active_mm) is the same as mm (as per context_switch()). So we remain with a bad CR3 / PGD and return to userland. The next thing that happens is handle_mm_fault() with an address for the execution of its code in userland. handle_mm_fault() realizes that it has a PTE with proper rights so it returns doing nothing. But the CPU looks at the wrong PGD and insists that something is wrong and faults again. And again. And one more time… This pagefault circle continues until the scheduler gets tired of it and puts another task on the CPU. It gets little difficult if the task is a RT task with a high priority. The system will either freeze or it gets fixed by the software watchdog thread which usually runs at RT-max prio. But waiting for the watchdog will increase the latency of the RT task which is no good. Fix this by disabling preemption across the critical code section. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/1470404259-26290-1-git-send-email-bigeasy@linutronix.de [ Prettified the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20s390/dasd: fix hanging device after clear subchannelStefan Haberland
commit 9ba333dc55cbb9523553df973adb3024d223e905 upstream. When a device is in a status where CIO has killed all I/O by itself the interrupt for a clear request may not contain an irb to determine the clear function. Instead it contains an error pointer -EIO. This was ignored by the DASD int_handler leading to a hanging device waiting for a clear interrupt. Handle -EIO error pointer correctly for requests that are clear pending and treat the clear as successful. Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com> Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20USB: validate wMaxPacketValue entries in endpoint descriptorsAlan Stern
commit aed9d65ac3278d4febd8665bd7db59ef53e825fe upstream. Erroneous or malicious endpoint descriptors may have non-zero bits in reserved positions, or out-of-bounds values. This patch helps prevent these from causing problems by bounds-checking the wMaxPacketValue entries in endpoint descriptors and capping the values at the maximum allowed. This issue was first discovered and tests were conducted by Jake Lamberson <jake.lamberson1@gmail.com>, an intern working for Rosie Hall. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: roswest <roswest@cisco.com> Tested-by: roswest <roswest@cisco.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: drop the USB_SPEED_SUPER_PLUS case] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20netfilter: nfnetlink_queue: reject verdict request from different portidLiping Zhang
commit 00a3101f561816e58de054a470484996f78eb5eb upstream. Like NFQNL_MSG_VERDICT_BATCH do, we should also reject the verdict request when the portid is not same with the initial portid(maybe from another process). Fixes: 97d32cf9440d ("netfilter: nfnetlink_queue: batch verdict support") Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20aacraid: Check size values after double-fetch from userDave Carroll
commit fa00c437eef8dc2e7b25f8cd868cfa405fcc2bb3 upstream. In aacraid's ioctl_send_fib() we do two fetches from userspace, one the get the fib header's size and one for the fib itself. Later we use the size field from the second fetch to further process the fib. If for some reason the size from the second fetch is different than from the first fix, we may encounter an out-of- bounds access in aac_fib_send(). We also check the sender size to insure it is not out of bounds. This was reported in https://bugzilla.kernel.org/show_bug.cgi?id=116751 and was assigned CVE-2016-6480. Reported-by: Pengfei Wang <wpengfeinudt@gmail.com> Fixes: 7c00ffa31 '[SCSI] 2.6 aacraid: Variable FIB size (updated patch)' Signed-off-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20drm/edid: Add 6 bpc quirk for display AEO model 0.Mario Kleiner
commit e10aec652f31ec61d6a0b4d00d8ef8d2b66fa0fd upstream. Bugzilla https://bugzilla.kernel.org/show_bug.cgi?id=105331 reports that the "AEO model 0" display is driven with 8 bpc without dithering by default, which looks bad because that panel is apparently a 6 bpc DP panel with faulty EDID. A fix for this was made by commit 013dd9e03872 ("drm/i915/dp: fall back to 18 bpp when sink capability is unknown"). That commit triggers new regressions in precision for DP->DVI and DP->VGA displays. A patch is out to revert that commit, but it will revert video output for the AEO model 0 panel to 8 bpc without dithering. The EDID 1.3 of that panel, as decoded from the xrandr output attached to that bugzilla bug report, is somewhat faulty, and beyond other problems also sets the "DFP 1.x compliant TMDS" bit, which according to DFP spec means to drive the panel with 8 bpc and no dithering in absence of other colorimetry information. Try to make the original bug reporter happy despite the faulty EDID by adding a quirk to mark that panel as 6 bpc, so 6 bpc output with dithering creates a nice picture. Tested by injecting the edid from the fdo bug into a DP connector via drm_kms_helper.edid_firmware and verifying the 6 bpc + dithering is selected. This patch should be backported to stable. Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20USB: serial: ftdi_sio: add device ID for WICED USB UART dev boardSheng-Hui J. Chu
commit ae34d12cc1e212ffcd92e069030e54dae69c832f upstream. BCM20706V2_EVAL is a WICED dev board designed with FT2232H USB 2.0 UART/FIFO IC. To support BCM920706V2_EVAL dev board for WICED development on Linux. Add the VID(0a5c) and PID(6422) to ftdi_sio driver to allow loading ftdi_sio for this board. Signed-off-by: Sheng-Hui J. Chu <s.jeffrey.chu@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20USB: serial: ftdi_sio: add PIDs for Ivium Technologies devicesRobert Deliën
commit 6977495c06f7f47636a076ee5a0ca571279d9697 upstream. Ivium Technologies uses the FTDI VID with custom PIDs for their line of electrochemical interfaces and the PalmSens they developed for PalmSens BV. Signed-off-by: Robert Delien <robert@delien.nl> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20USB: serial: option: add D-Link DWM-156/A3Lubomir Rintel
commit cf1b18030de29e4e5b0a57695ae5db4a89da0ff7 upstream. The device has four interfaces; the three serial ports ought to be handled by this driver: 00 Diagnostic interface serial port 01 NMEA device serial port 02 Mass storage (sd card) 03 Modem serial port The other product ids listed in the Windows driver are present already. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Johan Hovold <johan@kernel.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20block: fix use-after-free in seq fileVegard Nossum
commit 77da160530dd1dc94f6ae15a981f24e5f0021e84 upstream. I got a KASAN report of use-after-free: ================================================================== BUG: KASAN: use-after-free in klist_iter_exit+0x61/0x70 at addr ffff8800b6581508 Read of size 8 by task trinity-c1/315 ============================================================================= BUG kmalloc-32 (Not tainted): kasan: bad access detected ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Allocated in disk_seqf_start+0x66/0x110 age=144 cpu=1 pid=315 ___slab_alloc+0x4f1/0x520 __slab_alloc.isra.58+0x56/0x80 kmem_cache_alloc_trace+0x260/0x2a0 disk_seqf_start+0x66/0x110 traverse+0x176/0x860 seq_read+0x7e3/0x11a0 proc_reg_read+0xbc/0x180 do_loop_readv_writev+0x134/0x210 do_readv_writev+0x565/0x660 vfs_readv+0x67/0xa0 do_preadv+0x126/0x170 SyS_preadv+0xc/0x10 do_syscall_64+0x1a1/0x460 return_from_SYSCALL_64+0x0/0x6a INFO: Freed in disk_seqf_stop+0x42/0x50 age=160 cpu=1 pid=315 __slab_free+0x17a/0x2c0 kfree+0x20a/0x220 disk_seqf_stop+0x42/0x50 traverse+0x3b5/0x860 seq_read+0x7e3/0x11a0 proc_reg_read+0xbc/0x180 do_loop_readv_writev+0x134/0x210 do_readv_writev+0x565/0x660 vfs_readv+0x67/0xa0 do_preadv+0x126/0x170 SyS_preadv+0xc/0x10 do_syscall_64+0x1a1/0x460 return_from_SYSCALL_64+0x0/0x6a CPU: 1 PID: 315 Comm: trinity-c1 Tainted: G B 4.7.0+ #62 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 ffffea0002d96000 ffff880119b9f918 ffffffff81d6ce81 ffff88011a804480 ffff8800b6581500 ffff880119b9f948 ffffffff8146c7bd ffff88011a804480 ffffea0002d96000 ffff8800b6581500 fffffffffffffff4 ffff880119b9f970 Call Trace: [<ffffffff81d6ce81>] dump_stack+0x65/0x84 [<ffffffff8146c7bd>] print_trailer+0x10d/0x1a0 [<ffffffff814704ff>] object_err+0x2f/0x40 [<ffffffff814754d1>] kasan_report_error+0x221/0x520 [<ffffffff8147590e>] __asan_report_load8_noabort+0x3e/0x40 [<ffffffff83888161>] klist_iter_exit+0x61/0x70 [<ffffffff82404389>] class_dev_iter_exit+0x9/0x10 [<ffffffff81d2e8ea>] disk_seqf_stop+0x3a/0x50 [<ffffffff8151f812>] seq_read+0x4b2/0x11a0 [<ffffffff815f8fdc>] proc_reg_read+0xbc/0x180 [<ffffffff814b24e4>] do_loop_readv_writev+0x134/0x210 [<ffffffff814b4c45>] do_readv_writev+0x565/0x660 [<ffffffff814b8a17>] vfs_readv+0x67/0xa0 [<ffffffff814b8de6>] do_preadv+0x126/0x170 [<ffffffff814b92ec>] SyS_preadv+0xc/0x10 This problem can occur in the following situation: open() - pread() - .seq_start() - iter = kmalloc() // succeeds - seqf->private = iter - .seq_stop() - kfree(seqf->private) - pread() - .seq_start() - iter = kmalloc() // fails - .seq_stop() - class_dev_iter_exit(seqf->private) // boom! old pointer As the comment in disk_seqf_stop() says, stop is called even if start failed, so we need to reinitialise the private pointer to NULL when seq iteration stops. An alternative would be to set the private pointer to NULL when the kmalloc() in disk_seqf_start() fails. Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20hostfs: Freeing an ERR_PTR in hostfs_fill_sb_common()Dan Carpenter
commit 8a545f185145e3c09348cd74326268ecfc6715a3 upstream. We can't pass error pointers to kfree() or it causes an oops. Fixes: 52b209f7b848 ('get rid of hostfs_read_inode()') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-11-20mm/hugetlb: avoid soft lockup in set_max_huge_pages()Jia He
commit 649920c6ab93429b94bc7c1aa7c0e8395351be32 upstream. In powerpc servers with large memory(32TB), we watched several soft lockups for hugepage under stress tests. The call traces are as follows: 1. get_page_from_freelist+0x2d8/0xd50 __alloc_pages_nodemask+0x180/0xc20 alloc_fresh_huge_page+0xb0/0x190 set_max_huge_pages+0x164/0x3b0 2. prep_new_huge_page+0x5c/0x100 alloc_fresh_huge_page+0xc8/0x190 set_max_huge_pages+0x164/0x3b0 This patch fixes such soft lockups. It is safe to call cond_resched() there because it is out of spin_lock/unlock section. Link: http://lkml.kernel.org/r/1469674442-14848-1-git-send-email-hejianet@gmail.com Signed-off-by: Jia He <hejianet@gmail.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>