summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-02-13Linux 3.13.3v3.13.3Greg Kroah-Hartman
2014-02-13mmc: sdhci-pci: Fix possibility of chip->fixes being nullAdrian Hunter
commit 945be38caa287b177b8c17ffaae7754cab6a658f upstream. It is possible for chip->fixes to be null. Check before dereferencing it. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <chris@printf.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13mmc: sdhci-pci: Fix BYT sd card getting stuck in runtime suspendAdrian Hunter
commit 77a0122e0838663795651aa0beb2325156f98c09 upstream. A host controller for a SD card may need a GPIO for card detect in order to wake up from runtime suspend when a card is inserted. If that GPIO is not configured, then the host controller will not wake up. Fix that for the affected devices by not enabling runtime PM unless the GPIO is successfully set up. This affects BYT sd card host controller which had runtime PM enabled from v3.11. For completeness, the MFD sd card host controller is flagged also. The original patch before rebasing (see link below) was tested on v3.11.10 and v3.12.4 although the patch applied with some offsets and fuzz. The original patch is here: http://marc.info/?l=linux-mmc&m=138676702327057 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <chris@printf.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13rtc-cmos: Add an alarm disable quirkBorislav Petkov
commit d5a1c7e3fc38d9c7d629e1e47f32f863acbdec3d upstream. 41c7f7424259f ("rtc: Disable the alarm in the hardware (v2)") added the functionality to disable the RTC wake alarm when shutting down the box. However, there are at least two b0rked BIOSes we know about: https://bugzilla.novell.com/show_bug.cgi?id=812592 https://bugzilla.novell.com/show_bug.cgi?id=805740 where, when wakeup alarm is enabled in the BIOS, the machine reboots automatically right after shutdown, regardless of what wakeup time is programmed. Bisecting the issue lead to this patch so disable its functionality with a DMI quirk only for those boxes. Cc: Brecht Machiels <brecht@mos6581.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Borislav Petkov <bp@suse.de> [jstultz: Changed variable name for clarity, added extra dmi entry] Tested-by: Brecht Machiels <brecht@mos6581.org> Tested-by: Borislav Petkov <bp@suse.de> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13timekeeping: Fix missing timekeeping_update in suspend pathJohn Stultz
commit 330a1617b0a6268d427aa5922c94d082b1d3e96d upstream. Since 48cdc135d4840 (Implement a shadow timekeeper), we have to call timekeeping_update() after any adjustment to the timekeeping structure in order to make sure that any adjustments to the structure persist. In the timekeeping suspend path, we udpate the timekeeper structure, so we should be sure to update the shadow-timekeeper before releasing the timekeeping locks. Currently this isn't done. In most cases, the next time related code to run would be timekeeping_resume, which does update the shadow-timekeeper, but in an abundence of caution, this patch adds the call to timekeeping_update() in the suspend path. Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13timekeeping: Fix CLOCK_TAI timer/nanosleep delaysJohn Stultz
commit 04005f6011e3b504cd4d791d9769f7cb9a3b2eae upstream. A think-o in the calculation of the monotonic -> tai time offset results in CLOCK_TAI timers and nanosleeps to expire late (the latency is ~2x the tai offset). Fix this by adding the tai offset from the realtime offset instead of subtracting. Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-133.13.y: timekeeping: Fix clock_set/clock_was_set think-oJohn Stultz
In backporting 6fdda9a9c5db367130cf32df5d6618d08b89f46a (timekeeping: Avoid possible deadlock from clock_was_set_delayed), I ralized the patch had a think-o where instead of checking clock_set I accidentally typed clock_was_set (which is a function - so the conditional always is true). Upstream this was resolved in the immediately following patch 47a1b796306356f358e515149d86baf0cc6bf007 (tick/timekeeping: Call update_wall_time outside the jiffies lock). But since that patch really isn't -stable material, so this patch only pulls the name change. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13timekeeping: Avoid possible deadlock from clock_was_set_delayedJohn Stultz
commit 6fdda9a9c5db367130cf32df5d6618d08b89f46a upstream. As part of normal operaions, the hrtimer subsystem frequently calls into the timekeeping code, creating a locking order of hrtimer locks -> timekeeping locks clock_was_set_delayed() was suppoed to allow us to avoid deadlocks between the timekeeping the hrtimer subsystem, so that we could notify the hrtimer subsytem the time had changed while holding the timekeeping locks. This was done by scheduling delayed work that would run later once we were out of the timekeeing code. But unfortunately the lock chains are complex enoguh that in scheduling delayed work, we end up eventually trying to grab an hrtimer lock. Sasha Levin noticed this in testing when the new seqlock lockdep enablement triggered the following (somewhat abrieviated) message: [ 251.100221] ====================================================== [ 251.100221] [ INFO: possible circular locking dependency detected ] [ 251.100221] 3.13.0-rc2-next-20131206-sasha-00005-g8be2375-dirty #4053 Not tainted [ 251.101967] ------------------------------------------------------- [ 251.101967] kworker/10:1/4506 is trying to acquire lock: [ 251.101967] (timekeeper_seq){----..}, at: [<ffffffff81160e96>] retrigger_next_event+0x56/0x70 [ 251.101967] [ 251.101967] but task is already holding lock: [ 251.101967] (hrtimer_bases.lock#11){-.-...}, at: [<ffffffff81160e7c>] retrigger_next_event+0x3c/0x70 [ 251.101967] [ 251.101967] which lock already depends on the new lock. [ 251.101967] [ 251.101967] [ 251.101967] the existing dependency chain (in reverse order) is: [ 251.101967] -> #5 (hrtimer_bases.lock#11){-.-...}: [snipped] -> #4 (&rt_b->rt_runtime_lock){-.-...}: [snipped] -> #3 (&rq->lock){-.-.-.}: [snipped] -> #2 (&p->pi_lock){-.-.-.}: [snipped] -> #1 (&(&pool->lock)->rlock){-.-...}: [ 251.101967] [<ffffffff81194803>] validate_chain+0x6c3/0x7b0 [ 251.101967] [<ffffffff81194d9d>] __lock_acquire+0x4ad/0x580 [ 251.101967] [<ffffffff81194ff2>] lock_acquire+0x182/0x1d0 [ 251.101967] [<ffffffff84398500>] _raw_spin_lock+0x40/0x80 [ 251.101967] [<ffffffff81153e69>] __queue_work+0x1a9/0x3f0 [ 251.101967] [<ffffffff81154168>] queue_work_on+0x98/0x120 [ 251.101967] [<ffffffff81161351>] clock_was_set_delayed+0x21/0x30 [ 251.101967] [<ffffffff811c4bd1>] do_adjtimex+0x111/0x160 [ 251.101967] [<ffffffff811e2711>] compat_sys_adjtimex+0x41/0x70 [ 251.101967] [<ffffffff843a4b49>] ia32_sysret+0x0/0x5 [ 251.101967] -> #0 (timekeeper_seq){----..}: [snipped] [ 251.101967] other info that might help us debug this: [ 251.101967] [ 251.101967] Chain exists of: timekeeper_seq --> &rt_b->rt_runtime_lock --> hrtimer_bases.lock#11 [ 251.101967] Possible unsafe locking scenario: [ 251.101967] [ 251.101967] CPU0 CPU1 [ 251.101967] ---- ---- [ 251.101967] lock(hrtimer_bases.lock#11); [ 251.101967] lock(&rt_b->rt_runtime_lock); [ 251.101967] lock(hrtimer_bases.lock#11); [ 251.101967] lock(timekeeper_seq); [ 251.101967] [ 251.101967] *** DEADLOCK *** [ 251.101967] [ 251.101967] 3 locks held by kworker/10:1/4506: [ 251.101967] #0: (events){.+.+.+}, at: [<ffffffff81154960>] process_one_work+0x200/0x530 [ 251.101967] #1: (hrtimer_work){+.+...}, at: [<ffffffff81154960>] process_one_work+0x200/0x530 [ 251.101967] #2: (hrtimer_bases.lock#11){-.-...}, at: [<ffffffff81160e7c>] retrigger_next_event+0x3c/0x70 [ 251.101967] [ 251.101967] stack backtrace: [ 251.101967] CPU: 10 PID: 4506 Comm: kworker/10:1 Not tainted 3.13.0-rc2-next-20131206-sasha-00005-g8be2375-dirty #4053 [ 251.101967] Workqueue: events clock_was_set_work So the best solution is to avoid calling clock_was_set_delayed() while holding the timekeeping lock, and instead using a flag variable to decide if we should call clock_was_set() once we've released the locks. This works for the case here, where the do_adjtimex() was the deadlock trigger point. Unfortuantely, in update_wall_time() we still hold the jiffies lock, which would deadlock with the ipi triggered by clock_was_set(), preventing us from calling it even after we drop the timekeeping lock. So instead call clock_was_set_delayed() at that point. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13timekeeping: Fix potential lost pv notification of time changeJohn Stultz
commit 5258d3f25c76f6ab86e9333abf97a55a877d3870 upstream. In 780427f0e11 (Indicate that clock was set in the pvclock gtod notifier), logic was added to pass a CLOCK_WAS_SET notification to the pvclock notifier chain. While that patch added a action flag returned from accumulate_nsecs_to_secs(), it only uses the returned value in one location, and not in the logarithmic accumulation. This means if a leap second triggered during the logarithmic accumulation (which is most likely where it would happen), the notification that the clock was set would not make it to the pv notifiers. This patch extends the logarithmic_accumulation pass down that action flag so proper notification will occur. This patch also changes the varialbe action -> clock_set per Ingo's suggestion. Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: <xen-devel@lists.xen.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13timekeeping: Fix lost updates to tai adjustmentJohn Stultz
commit f55c07607a38f84b5c7e6066ee1cfe433fa5643c upstream. Since 48cdc135d4840 (Implement a shadow timekeeper), we have to call timekeeping_update() after any adjustment to the timekeeping structure in order to make sure that any adjustments to the structure persist. Unfortunately, the updates to the tai offset via adjtimex do not trigger this update, causing adjustments to the tai offset to be made and then over-written by the previous value at the next update_wall_time() call. This patch resovles the issue by calling timekeeping_update() right after setting the tai offset. Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13powerpc/mm: Fix compile error of pgtable-ppc64.hLi Zhong
commit fd120dc2e205d2318a8b47d6d8098b789e3af67d upstream. It seems that forward declaration couldn't work well with typedef, use struct spinlock directly to avoiding following build errors: In file included from include/linux/spinlock.h:81, from include/linux/seqlock.h:35, from include/linux/time.h:5, from include/uapi/linux/timex.h:56, from include/linux/timex.h:56, from include/linux/sched.h:17, from arch/powerpc/kernel/asm-offsets.c:17: include/linux/spinlock_types.h:76: error: redefinition of typedef 'spinlock_t' /root/linux-next/arch/powerpc/include/asm/pgtable-ppc64.h:563: note: previous declaration of 'spinlock_t' was here Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13powerpc/thp: Fix crash on mremapAneesh Kumar K.V
commit b3084f4db3aeb991c507ca774337c7e7893ed04f upstream. This patch fix the below crash NIP [c00000000004cee4] .__hash_page_thp+0x2a4/0x440 LR [c0000000000439ac] .hash_page+0x18c/0x5e0 ... Call Trace: [c000000736103c40] [00001ffffb000000] 0x1ffffb000000(unreliable) [437908.479693] [c000000736103d50] [c0000000000439ac] .hash_page+0x18c/0x5e0 [437908.479699] [c000000736103e30] [c00000000000924c] .do_hash_page+0x4c/0x58 On ppc64 we use the pgtable for storing the hpte slot information and store address to the pgtable at a constant offset (PTRS_PER_PMD) from pmd. On mremap, when we switch the pmd, we need to withdraw and deposit the pgtable again, so that we find the pgtable at PTRS_PER_PMD offset from new pmd. We also want to move the withdraw and deposit before the set_pmd so that, when page fault find the pmd as trans huge we can be sure that pgtable can be located at the offset. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13ftrace: Have function graph only trace based on global_ops filtersSteven Rostedt (Red Hat)
commit 23a8e8441a0a74dd612edf81dc89d1600bc0a3d1 upstream. Doing some different tests, I discovered that function graph tracing, when filtered via the set_ftrace_filter and set_ftrace_notrace files, does not always keep with them if another function ftrace_ops is registered to trace functions. The reason is that function graph just happens to trace all functions that the function tracer enables. When there was only one user of function tracing, the function graph tracer did not need to worry about being called by functions that it did not want to trace. But now that there are other users, this becomes a problem. For example, one just needs to do the following: # cd /sys/kernel/debug/tracing # echo schedule > set_ftrace_filter # echo function_graph > current_tracer # cat trace [..] 0) | schedule() { ------------------------------------------ 0) <idle>-0 => rcu_pre-7 ------------------------------------------ 0) ! 2980.314 us | } 0) | schedule() { ------------------------------------------ 0) rcu_pre-7 => <idle>-0 ------------------------------------------ 0) + 20.701 us | } # echo 1 > /proc/sys/kernel/stack_tracer_enabled # cat trace [..] 1) + 20.825 us | } 1) + 21.651 us | } 1) + 30.924 us | } /* SyS_ioctl */ 1) | do_page_fault() { 1) | __do_page_fault() { 1) 0.274 us | down_read_trylock(); 1) 0.098 us | find_vma(); 1) | handle_mm_fault() { 1) | _raw_spin_lock() { 1) 0.102 us | preempt_count_add(); 1) 0.097 us | do_raw_spin_lock(); 1) 2.173 us | } 1) | do_wp_page() { 1) 0.079 us | vm_normal_page(); 1) 0.086 us | reuse_swap_page(); 1) 0.076 us | page_move_anon_rmap(); 1) | unlock_page() { 1) 0.082 us | page_waitqueue(); 1) 0.086 us | __wake_up_bit(); 1) 1.801 us | } 1) 0.075 us | ptep_set_access_flags(); 1) | _raw_spin_unlock() { 1) 0.098 us | do_raw_spin_unlock(); 1) 0.105 us | preempt_count_sub(); 1) 1.884 us | } 1) 9.149 us | } 1) + 13.083 us | } 1) 0.146 us | up_read(); When the stack tracer was enabled, it enabled all functions to be traced, which now the function graph tracer also traces. This is a side effect that should not occur. To fix this a test is added when the function tracing is changed, as well as when the graph tracer is enabled, to see if anything other than the ftrace global_ops function tracer is enabled. If so, then the graph tracer calls a test trampoline that will look at the function that is being traced and compare it with the filters defined by the global_ops. As an optimization, if there's no other function tracers registered, or if the only registered function tracers also use the global ops, the function graph infrastructure will call the registered function graph callback directly and not go through the test trampoline. Fixes: d2d45c7a03a2 "tracing: Have stack_tracer use a separate list of functions" Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13ftrace: Fix synchronization location disabling and freeing ftrace_opsSteven Rostedt (Red Hat)
commit a4c35ed241129dd142be4cadb1e5a474a56d5464 upstream. The synchronization needed after ftrace_ops are unregistered must happen after the callback is disabled from becing called by functions. The current location happens after the function is being removed from the internal lists, but not after the function callbacks were disabled, leaving the functions susceptible of being called after their callbacks are freed. This affects perf and any externel users of function tracing (LTTng and SystemTap). Fixes: cdbe61bfe704 "ftrace: Allow dynamically allocated function tracers" Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13ftrace: Synchronize setting function_trace_op with ftrace_trace_functionSteven Rostedt (Red Hat)
commit 405e1d834807e51b2ebd3dea81cb51e53fb61504 upstream. ftrace_trace_function is a variable that holds what function will be called directly by the assembly code (mcount). If just a single function is registered and it handles recursion itself, then the assembly will call that function directly without any helper function. It also passes in the ftrace_op that was registered with the callback. The ftrace_op to send is stored in the function_trace_op variable. The ftrace_trace_function and function_trace_op needs to be coordinated such that the called callback wont be called with the wrong ftrace_op, otherwise bad things can happen if it expected a different op. Luckily, there's no callback that doesn't use the helper functions that requires this. But there soon will be and this needs to be fixed. Use a set_function_trace_op to store the ftrace_op to set the function_trace_op to when it is safe to do so (during the update function within the breakpoint or stop machine calls). Or if dynamic ftrace is not being used (static tracing) then we have to do a bit more synchronization when the ftrace_trace_function is set as that takes affect immediately (as oppose to dynamic ftrace doing it with the modification of the trampoline). Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13drm/mgag200,ast,cirrus: fix regression with drm_can_sleep conversionDave Airlie
commit 8b7ad1bb3d440da888f2a939dc870eba429b9192 upstream. I totally sign inverted my way out of this one. Reported-by: "Sabrina Dubroca" <sd@queasysnail.net> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13drm/mgag200: fix typo causing bw limits to be ignored on some chipsDave Airlie
commit ec22b4aa993abbd18f5bbbcb20a1c56be3b1d38b upstream. mode->mdev otherwise the bw limits never kick in. Reported in RHEL testing. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13drm/mgag200: fix oops in cursor code.Dave Airlie
commit 53dac830537b51df555ba5e7ebb236705b7eaa7c upstream. In some cases we enter the cursor code with file_priv = NULL causing an oops, we also can try to unpin something that isn't pinned, and this is a good fix for it. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13drm/vmwgfx: Fix regression caused by "drm/ttm: make ttm reservation calls ↵Thomas Hellstrom
behave like reservation calls" commit cf5e3413337309050c05e13dcebe85b7194a21e5 upstream. The call to ttm_eu_backoff_reservation() as part of an error path would cause a lock imbalance if the reservation ticket was not initialized. This error is easily triggered from user-space by submitting a bogus command stream. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13drm/vmwgfx: Fix the driver for large dma addressesThomas Hellstrom
commit 0d00c488f3de59d19784d5ce774528acaa194525 upstream. With dma compliance / IOMMU support added to the driver in kernel 3.13, the dma addresses can exceed 44 bits, which is what we support in 32-bit mode and with GMR1. So in 32-bit mode and optionally in 64-bit mode, restrict the dma addresses to 44 bits, and strip the old GMR1 code. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13drm: ast,cirrus,mgag200: use drm_can_sleepDave Airlie
commit f4b4718b61d1d5a7442a4fd6863ea80c3a10e508 upstream. these 3 were checking in_interrupt but we have situations where calling vunmap under this could cause a BUG to be hit in smp_call_function_many. Use the drm_can_sleep macro instead, which should stop this path from been taken in this case. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13drm/gma500: Lock struct_mutex around cursor updatesPatrik Jakobsson
commit 631794b44bd3dbfba37074954d5c584c9e8725f0 upstream. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64361 Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13drm/rcar-du: Update plane pitch in .mode_set_base() operationLaurent Pinchart
commit eb86301f293da3c362db729a9f40ddb25755902b upstream. When setting a new frame buffer with the mode set base operation the pitch value might change. Set the hardware plane pitch register at the same time as the plane base address in the rcar_du_plane_update_base() function to make sure the pitch value always matches the frame buffer. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13drm/gem: Always initialize the gem object in object_initDaniel Vetter
commit 6ab11a2635ce988ebc2e798947beb72cf7324119 upstream. At least drm/i915 expects that the obj->dev pointer is set even in failure paths. Specifically when the shmem initialization fails we call i915_gem_object_free which needs to deref obj->base.dev to get at the slab pointer in the device private structure. And the shmem allocation can easily fail when userspace is hitting open file limits. Doing the structure init even when the shmem file allocation fails prevents this Oops. This is a regression from commit 89c8233f82d9c8af5b20e72e4a185a38a7d3c50b Author: David Herrmann <dh.herrmann@gmail.com> Date: Thu Jul 11 11:56:32 2013 +0200 drm/gem: simplify object initialization v2: Add regression note which Chris supplied. Testcase: igt/gem_fd_exhaustion Reported-and-Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> References: http://lists.freedesktop.org/archives/intel-gfx/2014-January/038433.html Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Cc: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13drm/cirrus: correct register values for 16bppTakashi Iwai
commit 2510538fa000dd13a3e57b79bf073ffb1748976c upstream. When the mode is set with 16bpp on QEMU, the output gets totally broken. The culprit is the bogus register values set for 16bpp, which was likely copied from from a wrong place. Addresses https://bugzilla.novell.com/show_bug.cgi?id=799216 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: David Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13drm/i915: Decouple GPU error reporting from ring initialisationChris Wilson
commit 372fbb8e3927fc76b0f842d8eb8a798a71d8960f upstream. Currently we report through our error state only the rings that have been initialised (as detected by ring->obj). This check is done after the GPU reset and ring re-initialisation, which means that the software state may not be the same as when we captured the hardware error and we may not print out any of the vital information for debugging the hang. This (and the implied object leak) is a regression from commit 3d57e5bd1284f44e325f3a52d966259ed42f9e05 Author: Ben Widawsky <ben@bwidawsk.net> Date: Mon Oct 14 10:01:36 2013 -0700 drm/i915: Do a fuller init after reset Note that we are already starting to get bug reports with incomplete error states from 3.13, which also hampers debugging userspace driver issues. v2: Prevent a NULL dereference on 830gm/845g after a GPU reset where the scratch obj may be NULL. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=74094 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> [danvet: Add a bit of fluff to make it clear we need this expedited in stable.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13i915: remove pm_qos request on errorStanislaw Gruszka
commit 22accca01713b13dac386ca90b787aadf88f6551 upstream. Not removing pm qos request and free memory for it can cause crash, when some other driver use pm qos. For example, this oops: BUG: unable to handle kernel paging request at fffffffffffffff8 IP: [<ffffffff81307a6b>] plist_add+0x5b/0xd0 Call Trace: [<ffffffff810acf25>] pm_qos_update_target+0x125/0x1e0 [<ffffffff810ad071>] pm_qos_add_request+0x91/0x100 [<ffffffffa053ec14>] e1000_open+0xe4/0x5b0 [e1000e] was caused by earlier i915 probe failure: [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking [drm:init_ring_common] *ERROR* render ring initialization failed ctl 0001f001 head 00003004 tail 00000000 start 00003000 [drm:i915_driver_load] *ERROR* failed to init modeset i915: probe of 0000:00:02.0 failed with error -5 Bug report: http://bugzilla.redhat.com/show_bug.cgi?id=1057533 Reported-by: Giandomenico De Tullio <ghisha@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> [danvet: Drop unnecessary code movement.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13drm/i915: VLV2 - Fix hotplug detect bitsTodd Previte
commit 232a6ee9af8adb185640f67fcaaa9014a9aa0573 upstream. Add new definitions for hotplug live status bits for VLV2 since they're in reverse order from the gen4x ones. Changelog: - Restored gen4 bit definitions - Added new definitions for VLV2 - Added platform check for IS_VALLEYVIEW() in dp_detect to use the correct bit defintions - Replaced a lost trailing brace for the added switch() Signed-off-by: Todd Previte <tprevite@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73951 [danvet: Switch to _VLV postfix instead of prefix and regroupg comments again so that the g4x warning is right next to those defines. Also add a _G4X suffix for those special ones. Also cc stable.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13drm/i915: Fix the offset issue for the stolen GEM objectsAkash Goel
commit ec14ba47791965d2c08e0a681ff44eacbf3c4553 upstream. The 'offset' field of the 'scatterlist' structure was wrongly programmed with the offset value from the base of stolen area, whereas this field indicates the offset from where the interested data starts within the first PAGE pointed to by 'scattterlist' structure. As a result when a new GEM object allocated from stolen area is mapped to GTT, it could lead to an overwrite of GTT entries as the page count calculation will go wrong, refer the function 'sg_page_count'. v2: Modified the commit message. (Chris) Signed-off-by: Akash Goel <akash.goel@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71908 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69104 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13drm/i915: Flush outstanding requests before allocating new seqnoChris Wilson
commit 304d695c3dc8eb65206b9eaf16f8d1a41510d1cf upstream. In very rare cases (such as a memory failure stress test) it is possible to fill the entire ring without emitting a request. Under this circumstance, the outstanding request is flushed and waited upon. After space on the ring is cleared, we return to emitting the new command - except that we just cleared the seqno allocated for this operation and trigger the sanity check that a request is only ever emitted with a valid seqno. The fix is to rearrange the code to make sure the allocation of the seqno for this operation is after any required flushes of outstanding operations. The bug exists since the preallocation was introduced in commit 9d7730914f4cd496e356acfab95b41075aa8eae8 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Nov 27 16:22:52 2012 +0000 drm/i915: Preallocate next seqno before touching the ring Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13drm/nouveau: fix lock unbalance in nouveau_crtc_page_flipMaarten Lankhorst
commit 09c3de135063f93d7137ad112f551f293b1204cf upstream. Fixes a regression introduced by d5c1e84b3a130f0 "drm/nouveau: hold mutex while syncing to kernel channel". Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13drm/nouveau: hold mutex while syncing to kernel channelMaarten Lankhorst
commit d5c1e84b3a130f0743b218b33ff7d9cb493ab5b4 upstream. Not holding the mutex potentially causes corruption of the kernel channel when page flipping. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13drm/nouveau/falcon: use vmalloc to create firwmare copiesIlia Mirkin
commit 90d6db1635d5e225623af2e2e859feb607345287 upstream. Some firmware images may be large (64K), so using kmalloc memory is inappropriate for them. Use vmalloc instead, to avoid high-order allocation failures. Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13drm/nouveau: fix m2mf copy to tiled gartMaarten Lankhorst
commit ce8f7699f2b6ffe4aa8368b8d9d370875accaa5f upstream. Commit de7b7d59d54852c introduced tiled GART, but a linear copy is still performed. This may result in errors on eviction, fix it by checking tiling from memtype. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13target: Fix percpu_ref_put race in transport_lun_remove_cmdNicholas Bellinger
commit 5259a06ef97068b710f45d092a587e8d740f750f upstream. This patch fixes a percpu_ref_put race for se_lun->lun_ref in transport_lun_remove_cmd() where ->lun_ref could end up being put more than once per command via different target completion and fabric release contexts. It adds a cmpxchg() for se_cmd->lun_ref_active to ensure that percpu_ref_put() is only ever called once per se_cmd. This bug was manifesting itself as a LUN shutdown regression bug in >= v3.13 code, where percpu_ref_kill() would end up hanging indefinately due to the incorrect percpu_ref count. (Change se_cmd->lun_ref_active from bool -> int to force at least a 4-byte cmpxchg with MIPS ll/sc ins. - Fengguang) Reported-by: Tommy Apel <tommyapeldk@gmail.com> Cc: Tommy Apel <tommyapeldk@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13dm sysfs: fix a module unload raceMikulas Patocka
commit 2995fa78e423d7193f3b57835f6c1c75006a0315 upstream. This reverts commit be35f48610 ("dm: wait until embedded kobject is released before destroying a device") and provides an improved fix. The kobject release code that calls the completion must be placed in a non-module file, otherwise there is a module unload race (if the process calling dm_kobject_release is preempted and the DM module unloaded after the completion is triggered, but before dm_kobject_release returns). To fix this race, this patch moves the completion code to dm-builtin.c which is always compiled directly into the kernel if BLK_DEV_DM is selected. The patch introduces a new dm_kobject_holder structure, its purpose is to keep the completion and kobject in one place, so that it can be accessed from non-module code without the need to export the layout of struct mapped_device to that code. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13drm/radeon/dce8: workaround for atom BlankCrtc tableAlex Deucher
commit 78fe9e545ce6d510b979dc2d8e14096a279fc519 upstream. Some DCE8 boards have a funky BlankCrtc table that results in a timeout when trying to blank the display. The timeout is harmless (all operations needed from the table are complete), but wastes time and is confusing to users so work around it. bug: https://bugs.freedesktop.org/show_bug.cgi?id=73420 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13drm/radeon/DCE4+: clear bios scratch dpms bit (v2)Alex Deucher
commit 6802d4bad83f50081b2788698570218aaff8d10e upstream. The BlankCrtc table in some DCE8 boards has some logic shortcuts for the vbios when this bit is set. Clear it for driver use. v2: fix typo Bug: https://bugs.freedesktop.org/show_bug.cgi?id=73420 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13drm/radeon: set si_notify_smc_display_change properlyAlex Deucher
commit ffcda352b569dcf5be5c8a5f57545794acf4adb9 upstream. This is effectively a revert of 4573388c92ee60b4ed72b8d95b73df861189988c. Forcing a display active when there is none causes problems with dpm on some SI boards which results in improperly initialized dpm state and boot failures on some boards. As for the bug commit 4573388c92ee tried to address, one can manually force the state to high for better performance when using the card as a headless compute node until a better fix is developed. bugs: https://bugs.freedesktop.org/show_bug.cgi?id=73788 https://bugs.freedesktop.org/show_bug.cgi?id=69395 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13drm/radeon: fix DAC interrupt handling on DCE5+Alex Deucher
commit e9a321c6b2ac954a7dbf235f419c255a424a1273 upstream. DCE5 and newer hardware only has 1 DAC. Use the correct offset. This may fix display problems on certain board configurations. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13drm/radeon/runpm: don't runtime suspend non-PX cardsAlex Deucher
commit 9babd35ad72af631547c7ca294bc2e931cc40e58 upstream. Prevent runtime suspend of non-PX GPUs. Runtime suspend is not what we want in those cases. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13drm/radeon: add UVD support for OLANDAlex Deucher
commit 5d029339bb8ce69aeb68280c3de67d3cea456146 upstream. It seems this got dropped when we merged UVD support last year. Add this back now. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13drm/radeon: set the full cache bit for fences on r7xx+Alex Deucher
commit d45b964a22cad962d3ede1eba8d24f5cee7b2a92 upstream. Needed to properly flush the read caches for fences. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13drm/radeon: fix surface sync in fence on cayman (v2)Alex Deucher
commit 10e9ffae463396c5a25fdfe8a48d7c98a87f6b85 upstream. We need to set the engine bit to select the ME and also set the full cache bit. Should help stability on TN and cayman. V2: fix up surface sync in ib execute as well Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13drm/radeon: disable ss on DP for DCE3.xAlex Deucher
commit d8e24525094200601236fa64a54cf73e3d682f2e upstream. Seems to cause problems with certain DP monitors. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=40699 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13drm/radeon: disable dpm on BTCAlex Deucher
commit 919cf555c04e16dafb1fba56904eb23889a812c3 upstream. Still unstable on some boards. Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=73053 https://bugzilla.kernel.org/show_bug.cgi?id=68571 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13Revert "drm/radeon: disable CIK CP semaphores for now"Alex Deucher
commit 7f4237c6dad7c959615b896d3c6c728c37943f4d upstream. This reverts commit 99b4f25122f43210278cde17a9d100906235a074. Semaphores work fine after further review and testing.
2014-02-13drm/radeon: skip colorbuffer checking if COLOR_INFO.FORMAT is set to INVALIDMarek Olšák
commit 56492e0fac2dbaf7735ffd66b206a90624917789 upstream. This fixes a bug which was causing rejections of valid GPU commands from userspace. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13m88rs2000: set symbol rate accuratelyMalcolm Priestley
commit dd4491dfb9eb4fa3bfa7dc73ba989e69fbce2e10 upstream. Current setting of symbol rate is not very actuate causing loss of lock. Covert temp to u64 and use mclk to calculate from big number. Calculate symbol rate by dividing symbol rate by 1000 times 1 << 24 and dividing sum by mclk. Add other symbol rate settings to function registers 0xa0-0xa3. In set_frontend add changes to register 0xf1 this must be done prior call to fe_reset. Register 0x00 doesn't need a second write of 0x1 Applied after patch m88rs2000: add m88rs2000_set_carrieroffset Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13m88rs2000: add m88rs2000_set_carrieroffsetMalcolm Priestley
commit 06af15d1b6f45c60358feab88004472e5428f01c upstream. Set the carrier offset correctly using the default mclk values. Add function m88rs2000_get_mclk to calculate the mclk value against crystal frequency which will later be used for other functions. Add function m88rs2000_set_carrieroffset to calculate and set the offset value. variable offset becomes a signed value. Register 0x86 is set the appropriate value according to remainder value of frequency % 192857 calculation as shown. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>