| Age | Commit message (Collapse) | Author |
|---|
|
|
|
commit b79f4a1c68bb99152d0785ee4ea3ab4396cdacc6 upstream.
When we do inode readahead in log recovery, we do can do the
readahead before we've replayed the icreate transaction that stamps
the buffer with inode cores. The inode readahead verifier catches
this and marks the buffer as !done to indicate that it doesn't yet
contain valid inodes.
In adding buffer error notification (i.e. setting b_error = -EIO at
the same time as as we clear the done flag) to such a readahead
verifier failure, we can then get subsequent inode recovery failing
with this error:
XFS (dm-0): metadata I/O error: block 0xa00060 ("xlog_recover_do..(read#2)") error 5 numblks 32
This occurs when readahead completion races with icreate item replay
such as:
inode readahead
find buffer
lock buffer
submit RA io
....
icreate recovery
xfs_trans_get_buffer
find buffer
lock buffer
<blocks on RA completion>
.....
<ra completion>
fails verifier
clear XBF_DONE
set bp->b_error = -EIO
release and unlock buffer
<icreate gains lock>
icreate initialises buffer
marks buffer as done
adds buffer to delayed write queue
releases buffer
At this point, we have an initialised inode buffer that is up to
date but has an -EIO state registered against it. When we finally
get to recovering an inode in that buffer:
inode item recovery
xfs_trans_read_buffer
find buffer
lock buffer
sees XBF_DONE is set, returns buffer
sees bp->b_error is set
fail log recovery!
Essentially, we need xfs_trans_get_buf_map() to clear the error status of
the buffer when doing a lookup. This function returns uninitialised
buffers, so the buffer returned can not be in an error state and
none of the code that uses this function expects b_error to be set
on return. Indeed, there is an ASSERT(!bp->b_error); in the
transaction case in xfs_trans_get_buf_map() that would have caught
this if log recovery used transactions....
This patch firstly changes the inode readahead failure to set -EIO
on the buffer, and secondly changes xfs_buf_get_map() to never
return a buffer with an error state set so this first change doesn't
cause unexpected log recovery failures.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 96f859d52bcb1c6ea6f3388d39862bf7143e2f30 upstream.
Because struct xfs_agfl is 36 bytes long and has a 64-bit integer
inside it, gcc will quietly round the structure size up to the nearest
64 bits -- in this case, 40 bytes. This results in the XFS_AGFL_SIZE
macro returning incorrect results for v5 filesystems on 64-bit
machines (118 items instead of 119). As a result, a 32-bit xfs_repair
will see garbage in AGFL item 119 and complain.
Therefore, tell gcc not to pad the structure so that the AGFL size
calculation is correct.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 2e7bac536106236104e9e339531ff0fcdb7b8147 upstream.
This trivial wrapper adds clarity and makes the following patch
smaller.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit fb75a4282d0d9a3c7c44d940582c2d226cf3acfb upstream.
If the proxy lock in the requeue loop acquires the rtmutex for a
waiter then it acquired also refcount on the pi_state related to the
futex, but the waiter side does not drop the reference count.
Add the missing free_pi_state() call.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Darren Hart <darren@dvhart.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Bhuvanesh_Surachari@mentor.com
Cc: Andy Lowe <Andy_Lowe@mentor.com>
Link: http://lkml.kernel.org/r/20151219200607.178132067@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit b1d353ad3d5835b16724653b33c05124e1b5acf1 upstream.
"count" is controlled by the user and it can be negative. Let's prevent
that by making it unsigned. You have to have CAP_SYS_RAWIO to call this
function so the bug is not as serious as it could be.
Fixes: 5369c02d951a ('intel_scu_ipc: Utility driver for intel scu ipc')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit d7ce36924344ace0dbdc855b1206cacc46b36d45 upstream.
Some servers experienced fatal deadlocks because of a combination of
bugs, leading to multiple cpus calling dump_stack().
The checksumming bug was fixed in commit 34ae6a1aa054 ("ipv6: update
skb->csum when CE mark is propagated").
The second problem is a faulty locking in dump_stack()
CPU1 runs in process context and calls dump_stack(), grabs dump_lock.
CPU2 receives a TCP packet under softirq, grabs socket spinlock, and
call dump_stack() from netdev_rx_csum_fault().
dump_stack() spins on atomic_cmpxchg(&dump_lock, -1, 2), since
dump_lock is owned by CPU1
While dumping its stack, CPU1 is interrupted by a softirq, and happens
to process a packet for the TCP socket locked by CPU2.
CPU1 spins forever in spin_lock() : deadlock
Stack trace on CPU1 looked like :
NMI backtrace for cpu 1
RIP: _raw_spin_lock+0x25/0x30
...
Call Trace:
<IRQ>
tcp_v6_rcv+0x243/0x620
ip6_input_finish+0x11f/0x330
ip6_input+0x38/0x40
ip6_rcv_finish+0x3c/0x90
ipv6_rcv+0x2a9/0x500
process_backlog+0x461/0xaa0
net_rx_action+0x147/0x430
__do_softirq+0x167/0x2d0
call_softirq+0x1c/0x30
do_softirq+0x3f/0x80
irq_exit+0x6e/0xc0
smp_call_function_single_interrupt+0x35/0x40
call_function_single_interrupt+0x6a/0x70
<EOI>
printk+0x4d/0x4f
printk_address+0x31/0x33
print_trace_address+0x33/0x3c
print_context_stack+0x7f/0x119
dump_trace+0x26b/0x28e
show_trace_log_lvl+0x4f/0x5c
show_stack_log_lvl+0x104/0x113
show_stack+0x42/0x44
dump_stack+0x46/0x58
netdev_rx_csum_fault+0x38/0x3c
__skb_checksum_complete_head+0x6e/0x80
__skb_checksum_complete+0x11/0x20
tcp_rcv_established+0x2bd5/0x2fd0
tcp_v6_do_rcv+0x13c/0x620
sk_backlog_rcv+0x15/0x30
release_sock+0xd2/0x150
tcp_recvmsg+0x1c1/0xfc0
inet_recvmsg+0x7d/0x90
sock_recvmsg+0xaf/0xe0
___sys_recvmsg+0x111/0x3b0
SyS_recvmsg+0x5c/0xb0
system_call_fastpath+0x16/0x1b
Fixes: b58d977432c8 ("dump_stack: serialize the output from dump_stack()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alex Thorlton <athorlton@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 732042821cfa106b3c20b9780e4c60fee9d68900 upstream.
Helper radix_tree_iter_retry() resets next_index to the current index.
In following radix_tree_next_slot current chunk size becomes zero. This
isn't checked and it tries to dereference null pointer in slot.
Tagged iterator is fine because retry happens only at slot 0 where tag
bitmask in iter->tags is filled with single bit.
Fixes: 46437f9a554f ("radix-tree: fix race in gang lookup")
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 46437f9a554fbe3e110580ca08ab703b59f2f95a upstream.
If the indirect_ptr bit is set on a slot, that indicates we need to redo
the lookup. Introduce a new function radix_tree_iter_retry() which
forces the loop to retry the lookup by setting 'slot' to NULL and
turning the iterator back to point at the problematic entry.
This is a pretty rare problem to hit at the moment; the lookup has to
race with a grow of the radix tree from a height of 0. The consequences
of hitting this race are that gang lookup could return a pointer to a
radix_tree_node instead of a pointer to whatever the user had inserted
in the tree.
Fixes: cebbd29e1c2f ("radix-tree: rewrite gang lookup using iterator")
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 6611d8d76132f86faa501de9451a89bf23fb2371 upstream.
A spare array holding mem cgroup threshold events is kept around to make
sure we can always safely deregister an event and have an array to store
the new set of events in.
In the scenario where we're going from 1 to 0 registered events, the
pointer to the primary array containing 1 event is copied to the spare
slot, and then the spare slot is freed because no events are left.
However, it is freed before calling synchronize_rcu(), which means
readers may still be accessing threshold->primary after it is freed.
Fixed by only freeing after synchronize_rcu().
Signed-off-by: Martijn Coenen <maco@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 72214a24a7677d4c7501eecc9517ed681b5f2db2 upstream.
In Python3+ print is a function so the old syntax is not correct
anymore:
$ ./scripts/bloat-o-meter vmlinux.o vmlinux.o.old
File "./scripts/bloat-o-meter", line 61
print "add/remove: %s/%s grow/shrink: %s/%s up/down: %s/%s (%s)" % \
^
SyntaxError: invalid syntax
Fix by calling print as a function.
Tested on python 2.7.11, 3.5.1
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit ea535e418c01837d07b6c94e817540f50bfdadb0 upstream.
In include/asm-generic/sections.h:
/*
* Usage guidelines:
* _text, _data: architecture specific, don't use them in
* arch-independent code
* [_stext, _etext]: contains .text.* sections, may also contain
* .rodata.*
* and/or .init.* sections
_text is not guaranteed across architectures. Architectures such as ARM
may reuse parts which are not actually text and erroneously trigger a bug.
Switch to using _stext which is guaranteed to contain text sections.
Came out of https://lkml.kernel.org/g/<567B1176.4000106@redhat.com>
Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 601f1db653217f205ffa5fb33514b4e1711e56d1 upstream.
The build of m32104ut_defconfig for m32r arch was failing for long long
time with the error:
ERROR: "memory_start" [fs/udf/udf.ko] undefined!
ERROR: "memory_end" [fs/udf/udf.ko] undefined!
ERROR: "memory_end" [drivers/scsi/sg.ko] undefined!
ERROR: "memory_start" [drivers/scsi/sg.ko] undefined!
ERROR: "memory_end" [drivers/i2c/i2c-dev.ko] undefined!
ERROR: "memory_start" [drivers/i2c/i2c-dev.ko] undefined!
As done in other architectures export the symbols to fix the error.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 5c82171167adb8e4ac77b91a42cd49fb211a81a0 upstream.
xhci driver frees data for all devices, both usb2 and and usb3 the
first time usb_remove_hcd() is called, including td_list and and xhci_ring
structures.
When usb_remove_hcd() is called a second time for the second xhci bus it
will try to dequeue all pending urbs, and touches td_list which is already
freed for that endpoint.
Reported-by: Joe Lawrence <joe.lawrence@stratus.com>
Tested-by: Joe Lawrence <joe.lawrence@stratus.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 5f0f2887f4de9508dcf438deab28f1de8070c271 upstream.
test_pages_in_a_zone() does not account for the possibility of missing
sections in the given pfn range. pfn_valid_within always returns 1 when
CONFIG_HOLES_IN_ZONE is not set, allowing invalid pfns from missing
sections to pass the test, leading to a kernel oops.
Wrap an additional pfn loop with PAGES_PER_SECTION granularity to check
for missing sections before proceeding into the zone-check code.
This also prevents a crash from offlining memory devices with missing
sections. Despite this, it may be a good idea to keep the related patch
'[PATCH 3/3] drivers: memory: prohibit offlining of memory blocks with
missing sections' because missing sections in a memory block may lead to
other problems not covered by the scope of this fix.
Signed-off-by: Andrew Banman <abanman@sgi.com>
Acked-by: Alex Thorlton <athorlton@sgi.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Greg KH <greg@kroah.com>
Cc: Seth Jennings <sjennings@variantweb.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit fda3bec12d0979aae3f02ee645913d66fbc8a26e upstream.
This is a 32-bit register. Apparently harmless on real hardware, but
causing justified warnings in simulation.
Signed-off-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit dd0d0d4de582a6a61c032332c91f4f4cb2bab569 upstream.
Without i8042.nomux=1 the Elantech touch pad is not working at all on
a Fujitsu Lifebook U745. This patch does not seem necessary for all
U745 (maybe because of different BIOS versions?). However, it was
verified that the patch does not break those (see opensuse bug 883192:
https://bugzilla.opensuse.org/show_bug.cgi?id=883192).
Signed-off-by: Aurélien Francillon <aurelien@francillon.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 6544a1df11c48c8413071aac3316792e4678fbfb upstream.
When using a protocol v2 or v3 hardware, elantech uses the function
elantech_report_semi_mt_data() to report data. This devices are rather
creepy because if num_finger is 3, (x2,y2) is (0,0). Yes, only one valid
touch is reported.
Anyway, userspace (libinput) is now confused by these (0,0) touches,
and detect them as palm, and rejects them.
Commit 3c0213d17a09 ("Input: elantech - fix semi-mt protocol for v3 HW")
was sufficient enough for xf86-input-synaptics and libinput before it has
palm rejection. Now we need to actually tell libinput that this device is
a semi-mt one and it should not rely on the actual values of the 2 touches.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 60603950f836ef4e88daddf61a273b91e671db2d upstream.
Another Lifebook machine that needs the same quirk as other similar
models to make the driver working.
Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=883192
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit d96b339f453997f2f08c52da3f41423be48c978f upstream.
I saw the following BUG_ON triggered in a testcase where a process calls
madvise(MADV_SOFT_OFFLINE) on thps, along with a background process that
calls migratepages command repeatedly (doing ping-pong among different
NUMA nodes) for the first process:
Soft offlining page 0x60000 at 0x700000600000
__get_any_page: 0x60000 free buddy page
page:ffffea0001800000 count:0 mapcount:-127 mapping: (null) index:0x1
flags: 0x1fffc0000000000()
page dumped because: VM_BUG_ON_PAGE(atomic_read(&page->_count) == 0)
------------[ cut here ]------------
kernel BUG at /src/linux-dev/include/linux/mm.h:342!
invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC
Modules linked in: cfg80211 rfkill crc32c_intel serio_raw virtio_balloon i2c_piix4 virtio_blk virtio_net ata_generic pata_acpi
CPU: 3 PID: 3035 Comm: test_alloc_gene Tainted: G O 4.4.0-rc8-v4.4-rc8-160107-1501-00000-rc8+ #74
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
task: ffff88007c63d5c0 ti: ffff88007c210000 task.ti: ffff88007c210000
RIP: 0010:[<ffffffff8118998c>] [<ffffffff8118998c>] put_page+0x5c/0x60
RSP: 0018:ffff88007c213e00 EFLAGS: 00010246
Call Trace:
put_hwpoison_page+0x4e/0x80
soft_offline_page+0x501/0x520
SyS_madvise+0x6bc/0x6f0
entry_SYSCALL_64_fastpath+0x12/0x6a
Code: 8b fc ff ff 5b 5d c3 48 89 df e8 b0 fa ff ff 48 89 df 31 f6 e8 c6 7d ff ff 5b 5d c3 48 c7 c6 08 54 a2 81 48 89 df e8 a4 c5 01 00 <0f> 0b 66 90 66 66 66 66 90 55 48 89 e5 41 55 41 54 53 48 8b 47
RIP [<ffffffff8118998c>] put_page+0x5c/0x60
RSP <ffff88007c213e00>
The root cause resides in get_any_page() which retries to get a refcount
of the page to be soft-offlined. This function calls
put_hwpoison_page(), expecting that the target page is putback to LRU
list. But it can be also freed to buddy. So the second check need to
care about such case.
Fixes: af8fae7c0886 ("mm/memory-failure.c: clean up soft_offline_page()")
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 3ca8138f014a913f98e6ef40e939868e1e9ea876 upstream.
I got a report about unkillable task eating CPU. Further
investigation shows, that the problem is in the fuse_fill_write_pages()
function. If iov's first segment has zero length, we get an infinite
loop, because we never reach iov_iter_advance() call.
Fix this by calling iov_iter_advance() before repeating an attempt to
copy data from userspace.
A similar problem is described in 124d3b7041f ("fix writev regression:
pan hanging unkillable and un-straceable"). If zero-length segmend
is followed by segment with invalid address,
iov_iter_fault_in_readable() checks only first segment (zero-length),
iov_iter_copy_from_user_atomic() skips it, fails at second and
returns zero -> goto again without skipping zero-length segment.
Patch calls iov_iter_advance() before goto again: we'll skip zero-length
segment at second iteraction and iov_iter_fault_in_readable() will detect
invalid address.
Special thanks to Konstantin Khlebnikov, who helped a lot with the commit
description.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Maxim Patlasov <mpatlasov@parallels.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Roman Gushchin <klamm@yandex-team.ru>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Fixes: ea9b9907b82a ("fuse: implement perform_write")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 5070fb14a0154f075c8b418e5bc58a620ae85a45 upstream.
When trying to set the ICST 307 clock to 25174000 Hz I ran into
this arithmetic error: the icst_hz_to_vco() correctly figure out
DIVIDE=2, RDW=100 and VDW=99 yielding a frequency of
25174000 Hz out of the VCO. (I replicated the icst_hz() function
in a spreadsheet to verify this.)
However, when I called icst_hz() on these VCO settings it would
instead return 4122709 Hz. This causes an error in the common
clock driver for ICST as the common clock framework will call
.round_rate() on the clock which will utilize icst_hz_to_vco()
followed by icst_hz() suggesting the erroneous frequency, and
then the clock gets set to this.
The error did not manifest in the old clock framework since
this high frequency was only used by the CLCD, which calls
clk_set_rate() without first calling clk_round_rate() and since
the old clock framework would not call clk_round_rate() before
setting the frequency, the correct values propagated into
the VCO.
After some experimenting I figured out that it was due to a simple
arithmetic overflow: the divisor for 24Mhz reference frequency
as reference becomes 24000000*2*(99+8)=0x132212400 and the "1"
in bit 32 overflows and is lost.
But introducing an explicit 64-by-32 bit do_div() and casting
the divisor into (u64) we get the right frequency back, and the
right frequency gets set.
Tested on the ARM Versatile.
Cc: linux-clk@vger.kernel.org
Cc: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit e972c37459c813190461dabfeaac228e00aae259 upstream.
Since the dawn of time the ICST code has only supported divide
by one or hang in an eternal loop. Luckily we were always dividing
by one because the reference frequency for the systems using
the ICSTs is 24MHz and the [min,max] values for the PLL input
if [10,320] MHz for ICST307 and [6,200] for ICST525, so the loop
will always terminate immediately without assigning any divisor
for the reference frequency.
But for the code to make sense, let's insert the missing i++
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit fa0708b320f6da4c1104fe56e01b7abf66fd16ad upstream.
In cpu_v7_do_suspend routine, r11 is used while it is NOT
saved/restored, different compiler may have different usage
of ARM general registers, so it may cause issues during
calling cpu_v7_do_suspend.
We meet kernel fault occurs when using GCC 4.8.3, r11 contains
valid value before calling into cpu_v7_do_suspend, but when returned
from this routine, r11 is corrupted and lead to kernel fault.
Doing save/restore for those corrupted registers is a must in
assemble code.
Signed-off-by: Anson Huang <Anson.Huang@freescale.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 5442f0eadf2885453d5b2ed8c8592f32a3744f8e upstream.
The "reg" entry in the "poweroff" section of "kirkwood-ts219.dtsi"
addressed the wrong uart (0 = console). This patch changes the address
to select uart 1, which is the uart connected to the pic
microcontroller, which can switch the device off.
Signed-off-by: Helmut Klein <hgkr.klein@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 4350a47bbac3 ("ARM: Kirkwood: Make use of the QNAP Power off driver.")
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit bb00c898ad1ce40c4bb422a8207ae562e9aea7ae upstream.
If a name contains at least some characters with Unicode values
exceeding single byte, the CS0 output should have 2 bytes per character.
And if other input characters have single byte Unicode values, then
the single input byte is converted to 2 output bytes, and the length
of output becomes larger than the length of input. And if the input
name is long enough, the output length may exceed the allocated buffer
length.
All this means that conversion from UTF8 or NLS to CS0 requires
checking of output length in order to stop when it exceeds the given
output buffer size.
[JK: Make code return -ENAMETOOLONG instead of silently truncating the
name]
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit ad402b265ecf6fa22d04043b41444cdfcdf4f52d upstream.
udf_CS0toUTF8 function stops the conversion when the output buffer
length reaches UDF_NAME_LEN-2, which is correct maximum name length,
but, when checking, it leaves the space for a single byte only,
while multi-bytes output characters can take more space, causing
buffer overflow.
Similar error exists in udf_CS0toNLS function, that restricts
the output length to UDF_NAME_LEN, while actual maximum allowed
length is UDF_NAME_LEN-2.
In these cases the output can override not only the current buffer
length field, causing corruption of the name buffer itself, but also
following allocation structures, causing kernel crash.
Adjust the output length checks in both functions to prevent buffer
overruns in case of multi-bytes UTF8 or NLS characters.
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit b0918d9f476a8434b055e362b83fa4fd1d462c3f upstream.
udf_next_aext() just follows extent pointers while extents are marked as
indirect. This can loop forever for corrupted filesystem. Limit number
the of indirect extents we are willing to follow in a row.
[JK: Updated changelog, limit, style]
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Cc: Jan Kara <jack@suse.com>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 361cad3c89070aeb37560860ea8bfc092d545adc upstream.
We've seen this in a packet capture - I've intermixed what I
think was going on. The fix here is to grab the so_lock sooner.
1964379 -> #1 open (for write) reply seqid=1
1964393 -> #2 open (for read) reply seqid=2
__nfs4_close(), state->n_wronly--
nfs4_state_set_mode_locked(), changes state->state = [R]
state->flags is [RW]
state->state is [R], state->n_wronly == 0, state->n_rdonly == 1
1964398 -> #3 open (for write) call -> because close is already running
1964399 -> downgrade (to read) call seqid=2 (close of #1)
1964402 -> #3 open (for write) reply seqid=3
__update_open_stateid()
nfs_set_open_stateid_locked(), changes state->flags
state->flags is [RW]
state->state is [R], state->n_wronly == 0, state->n_rdonly == 1
new sequence number is exposed now via nfs4_stateid_copy()
next step would be update_open_stateflags(), pending so_lock
1964403 -> downgrade reply seqid=2, fails with OLD_STATEID (close of #1)
nfs4_close_prepare() gets so_lock and recalcs flags -> send close
1964405 -> downgrade (to read) call seqid=3 (close of #1 retry)
__update_open_stateid() gets so_lock
* update_open_stateflags() updates state->n_wronly.
nfs4_state_set_mode_locked() updates state->state
state->flags is [RW]
state->state is [RW], state->n_wronly == 1, state->n_rdonly == 1
* should have suppressed the preceding nfs4_close_prepare() from
sending open_downgrade
1964406 -> write call
1964408 -> downgrade (to read) reply seqid=4 (close of #1 retry)
nfs_clear_open_stateid_locked()
state->flags is [R]
state->state is [RW], state->n_wronly == 1, state->n_rdonly == 1
1964409 -> write reply (fails, openmode)
Signed-off-by: Andrew Elble <aweits@rit.edu>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 4b550af519854421dfec9f7732cdddeb057134b2 upstream.
The setup_ntlmv2_rsp() function may return positive value ENOMEM instead
of -ENOMEM in case of kmalloc failure.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 01b9b0b28626db4a47d7f48744d70abca9914ef1 upstream.
In some cases tmp_bug can be not filled in cifs_filldir and stay uninitialized,
therefore its printk with "%s" modifier can leak content of kernelspace memory.
If old content of this buffer does not contain '\0' access bejond end of
allocated object can crash the host.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Steve French <steve.french@primarydata.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 97a249e98a72d6b79fb7350a8dd56b147e9d5bdb upstream.
Without this change, the name entity for mcp4725 is missing in
/sys/bus/iio/devices/iio\:device*/name
With this change, name is reported correctly
Signed-off-by: Yong Li <sdliyong@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit d590faf9e8f8509a0a0aa79c38e87fcc6b913248 upstream.
The SPI tx and rx buffers are both supposed to be scan_bytes amount of
bytes large and a common allocation is used to allocate both buffers. This
puts the beginning of the tx buffer scan_bytes bytes after the rx buffer.
The initialization of the tx buffer pointer is done adding scan_bytes to
the beginning of the rx buffer, but since the rx buffer is of type __be16
this will actually add two times as much and the tx buffer ends up pointing
after the allocated buffer.
Fix this by using scan_count, which is scan_bytes / 2, instead of
scan_bytes when initializing the tx buffer pointer.
Fixes: aacff892cbd5 ("staging:iio:adis: Preallocate transfer message")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 231bfe53c57e89857753c940192acba933cba56c upstream.
WARN_ON() only takes a condition argument. I have changed these to
WARN() instead.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 5dcbe97bedd6ba4b0f574a96cc2e293d26f3d857 upstream.
The ad5629/ad5669 are the I2C variant of the ad5628/ad5668, which has a SPI
interface. They are mostly identical with the exception that the shift
factor is different. Currently the driver does not take care of this
difference which leads to incorrect DAC output values.
Fix this by introducing a custom channel spec for the ad5629/ad5669 with
the correct shift factor.
Fixes: commit 6a17a0768f77 ("iio:dac:ad5064: Add support for the ad5629r and ad5669r")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 03fe472ef33b7f31fbd11d300dbb3fdab9c00fd4 upstream.
i2c_master_send() returns the number of bytes transferred on success while
the ad5064 driver expects that the write() callback returns 0 on success.
Fix that by translating any non negative return value of i2c_master_send()
to 0.
Fixes: commit 6a17a0768f77 ("iio:dac:ad5064: Add support for the ad5629r and ad5669r")
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 01bb70ae0b98d266fa3e860482c7ce22fa482a6e upstream.
If common clock framework is configured, the driver generates a warning,
which is fixed by this change:
root@devkit3250:~# cat /sys/bus/iio/devices/iio\:device0/in_voltage0_raw
------------[ cut here ]------------
WARNING: CPU: 0 PID: 724 at drivers/clk/clk.c:727 clk_core_enable+0x2c/0xa4()
Modules linked in: sc16is7xx snd_soc_uda1380
CPU: 0 PID: 724 Comm: cat Not tainted 4.3.0-rc2+ #198
Hardware name: LPC32XX SoC (Flattened Device Tree)
Backtrace:
[<>] (dump_backtrace) from [<>] (show_stack+0x18/0x1c)
[<>] (show_stack) from [<>] (dump_stack+0x20/0x28)
[<>] (dump_stack) from [<>] (warn_slowpath_common+0x90/0xb8)
[<>] (warn_slowpath_common) from [<>] (warn_slowpath_null+0x24/0x2c)
[<>] (warn_slowpath_null) from [<>] (clk_core_enable+0x2c/0xa4)
[<>] (clk_core_enable) from [<>] (clk_enable+0x24/0x38)
[<>] (clk_enable) from [<>] (lpc32xx_read_raw+0x38/0x80)
[<>] (lpc32xx_read_raw) from [<>] (iio_read_channel_info+0x70/0x94)
[<>] (iio_read_channel_info) from [<>] (dev_attr_show+0x28/0x4c)
[<>] (dev_attr_show) from [<>] (sysfs_kf_seq_show+0x8c/0xf0)
[<>] (sysfs_kf_seq_show) from [<>] (kernfs_seq_show+0x2c/0x30)
[<>] (kernfs_seq_show) from [<>] (seq_read+0x1c8/0x440)
[<>] (seq_read) from [<>] (kernfs_fop_read+0x38/0x170)
[<>] (kernfs_fop_read) from [<>] (do_readv_writev+0x16c/0x238)
[<>] (do_readv_writev) from [<>] (vfs_readv+0x50/0x58)
[<>] (vfs_readv) from [<>] (default_file_splice_read+0x1a4/0x308)
[<>] (default_file_splice_read) from [<>] (do_splice_to+0x78/0x84)
[<>] (do_splice_to) from [<>] (splice_direct_to_actor+0xc8/0x1cc)
[<>] (splice_direct_to_actor) from [<>] (do_splice_direct+0xa0/0xb8)
[<>] (do_splice_direct) from [<>] (do_sendfile+0x1a8/0x30c)
[<>] (do_sendfile) from [<>] (SyS_sendfile64+0x104/0x10c)
[<>] (SyS_sendfile64) from [<>] (ret_fast_syscall+0x0/0x38)
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 785171fd6cd7dcd7ada5a733b6a2d44ec566c3a0 upstream.
While the datasheet for the AD7785 lists 0xXB as the product ID the actual
product ID is 0xX3.
Fix the product ID otherwise the driver will reject the device due to non
matching IDs.
Fixes: e786cc26dcc5 ("staging:iio:ad7793: Implement stricter id checking")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 90a88d6ef88edcfc4f644dddc7eef4ea41bccf8b upstream.
This softlockup is currently happening:
[ 444.088002] NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [kworker/1:1:29]
[ 444.088002] Modules linked in: lpfc(-) qla2x00tgt(O) qla2xxx_scst(O) scst_vdisk(O) scsi_transport_fc libcrc32c scst(O) dlm configfs nfsd lockd grace nfs_acl auth_rpcgss sunrpc ed
d snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device dm_mod iTCO_wdt snd_hda_codec_realtek snd_hda_codec_generic gpio_ich iTCO_vendor_support ppdev snd_hda_intel snd_hda_codec snd_hda
_core snd_hwdep tg3 snd_pcm snd_timer libphy lpc_ich parport_pc ptp acpi_cpufreq snd pps_core fjes parport i2c_i801 ehci_pci tpm_tis tpm sr_mod cdrom soundcore floppy hwmon sg 8250_
fintek pcspkr i915 drm_kms_helper uhci_hcd ehci_hcd drm fb_sys_fops sysimgblt sysfillrect syscopyarea i2c_algo_bit usbcore button video usb_common fan ata_generic ata_piix libata th
ermal
[ 444.088002] CPU: 1 PID: 29 Comm: kworker/1:1 Tainted: G O 4.4.0-rc5-2.g1e923a3-default #1
[ 444.088002] Hardware name: FUJITSU SIEMENS ESPRIMO E /D2164-A1, BIOS 5.00 R1.10.2164.A1 05/08/2006
[ 444.088002] Workqueue: fc_wq_4 fc_rport_final_delete [scsi_transport_fc]
[ 444.088002] task: f6266ec0 ti: f6268000 task.ti: f6268000
[ 444.088002] EIP: 0060:[<c07e7044>] EFLAGS: 00000286 CPU: 1
[ 444.088002] EIP is at _raw_spin_unlock_irqrestore+0x14/0x20
[ 444.088002] EAX: 00000286 EBX: f20d3800 ECX: 00000002 EDX: 00000286
[ 444.088002] ESI: f50ba800 EDI: f2146848 EBP: f6269ec8 ESP: f6269ec8
[ 444.088002] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 444.088002] CR0: 8005003b CR2: 08f96600 CR3: 363ae000 CR4: 000006d0
[ 444.088002] Stack:
[ 444.088002] f6269eec c066b0f7 00000286 f2146848 f50ba808 f50ba800 f50ba800 f2146a90
[ 444.088002] f2146848 f6269f08 f8f0a4ed f3141000 f2146800 f2146a90 f619fa00 00000040
[ 444.088002] f6269f40 c026cb25 00000001 166c6392 00000061 f6757140 f6136340 00000004
[ 444.088002] Call Trace:
[ 444.088002] [<c066b0f7>] scsi_remove_target+0x167/0x1c0
[ 444.088002] [<f8f0a4ed>] fc_rport_final_delete+0x9d/0x1e0 [scsi_transport_fc]
[ 444.088002] [<c026cb25>] process_one_work+0x155/0x3e0
[ 444.088002] [<c026cde7>] worker_thread+0x37/0x490
[ 444.088002] [<c027214b>] kthread+0x9b/0xb0
[ 444.088002] [<c07e72c1>] ret_from_kernel_thread+0x21/0x40
What appears to be happening is that something has pinned the target
so it can't go into STARGET_DEL via final release and the loop in
scsi_remove_target spins endlessly until that happens.
The fix for this soft lockup is to not keep looping over a device that
we've called remove on but which hasn't gone into DEL state. This
patch will retain a simplistic memory of the last target and not keep
looping over it.
Reported-by: Sebastian Herbszt <herbszt@gmx.de>
Tested-by: Sebastian Herbszt <herbszt@gmx.de>
Fixes: 40998193560dab6c3ce8d25f4fa58a23e252ef38
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 82c43310508eb19eb41fe7862e89afeb74030b84 upstream.
I have a Marvell 88SE9230 SATA Controller that has some sort of
integrated console SCSI device attached to one of the ports.
ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
ata14.00: configured for UDMA/66
scsi 13:0:0:0: Processor Marvell Console 1.01 PQ: 0 ANSI: 5
Sending it VPD INQUIRY command seem to always fail with following error:
ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata14.00: irq_stat 0x40000001
ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 2 dma 16640 in
Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
ata14: hard resetting link
This has been minor annoyance (only error printed on dmesg) until commit
09e2b0b14690 ("scsi: rescan VPD attributes") added call to scsi_attach_vpd()
in scsi_rescan_device(). The commit causes the system to splat out
following errors continuously without ever reaching the UI:
ata14.00: configured for UDMA/66
ata14: EH complete
ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata14.00: irq_stat 0x40000001
ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 6 dma 16640 in
Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
ata14: hard resetting link
ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata14.00: configured for UDMA/66
ata14: EH complete
ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata14.00: irq_stat 0x40000001
ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 7 dma 16640 in
Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
Without in-depth understanding of SCSI layer and the Marvell controller,
I suspect this happens because when the link goes down (because of an
error) we schedule scsi_rescan_device() which again fails to read VPD
data... ad infinitum.
Since VPD data cannot be read from the device anyway we prevent the SCSI
layer from even trying by blacklisting the device. This gets away the
error and the system starts up normally.
[mkp: Widened the match to all revisions of this device]
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reported-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit d2d06d4fe0f2cc2df9b17fefec96e6e1a1271d91 upstream.
If MODE SELECT returns with sense '05/91/36' (command lock violation)
it should always be retried without counting the number of retries.
During an HBA upgrade or similar circumstances one might see a flood
of MODE SELECT command from various HBAs, which will easily trigger
the sense code and exceed the retry count.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 461c7fa126794157484dca48e88effa4963e3af3 upstream.
Reduced testcase:
#include <fcntl.h>
#include <unistd.h>
#include <sys/mman.h>
#include <numaif.h>
#define SIZE 0x2000
int main()
{
int fd;
void *p;
fd = open("/dev/sg0", O_RDWR);
p = mmap(NULL, SIZE, PROT_EXEC, MAP_PRIVATE | MAP_LOCKED, fd, 0);
mbind(p, SIZE, 0, NULL, 0, MPOL_MF_MOVE);
return 0;
}
We shouldn't try to migrate pages in sg VMA as we don't have a way to
update Sg_scatter_hold::pages accordingly from mm core.
Let's mark the VMA as VM_IO to indicate to mm core that the VMA is not
migratable.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Shiraz Hashim <shashim@codeaurora.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 13b4389143413a1f18127c07f72c74cad5b563e8 upstream.
Runtime suspend during driver probe and removal can cause problems.
The driver's runtime_suspend or runtime_resume callbacks may invoked
before the driver has finished binding to the device or after the
driver has unbound from the device.
This problem shows up with the sd and sr drivers, and can cause disk
or CD/DVD drives to become unusable as a result. The fix is simple.
The drivers store a pointer to the scsi_disk or scsi_cd structure as
their private device data when probing is finished, so we simply have
to be sure to clear the private data during removal and test it during
runtime suspend/resume.
This fixes <https://bugs.debian.org/801925>.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Paul Menzel <paul.menzel@giantmonkey.de>
Reported-by: Erich Schubert <erich@debian.org>
Reported-by: Alexandre Rossi <alexandre.rossi@gmail.com>
Tested-by: Paul Menzel <paul.menzel@giantmonkey.de>
Tested-by: Erich Schubert <erich@debian.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 26a99c19f810b2593410899a5b304b21b47428a6 upstream.
This patch is a iscsi-target specific bug-fix for a dead-lock
that can occur during explicit struct se_node_acl->acl_group
se_session deletion via configfs rmdir(2), when iscsi-target
time2retain timer is still active.
It changes iscsi-target to obtain se_portal_group->session_lock
internally using spin_in_locked() to check for the specific
se_node_acl configfs shutdown rmdir(2) case.
Note this patch is intended for stable, and the subsequent
v4.5-rc patch converts target_core_tpg.c to use proper
se_sess->sess_kref reference counting for both se_node_acl
deletion + se_node_acl->queue_depth se_session restart.
Reported-by:: Sagi Grimberg <sagig@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 4fd41a8552afc01054d9d9fc7f1a63c324867d27 upstream.
The routines in scsi_pm.c assume that if a runtime-PM callback is
invoked for a SCSI device, it can only mean that the device's driver
has asked the block layer to handle the runtime power management (by
calling blk_pm_runtime_init(), which among other things sets q->dev).
However, this assumption turns out to be wrong for things like the ses
driver. Normally ses devices are not allowed to do runtime PM, but
userspace can override this setting. If this happens, the kernel gets
a NULL pointer dereference when blk_post_runtime_resume() tries to use
the uninitialized q->dev pointer.
This patch fixes the problem by checking q->dev in block layer before
handle runtime PM. Since ses doesn't define any PM callbacks and call
blk_pm_runtime_init(), the crash won't occur.
This fixes Bugzilla #101371.
https://bugzilla.kernel.org/show_bug.cgi?id=101371
More discussion can be found from below link.
http://marc.info/?l=linux-scsi&m=144163730531875&w=2
Signed-off-by: Ken Xue <Ken.Xue@amd.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Xiangliang Yu <Xiangliang.Yu@amd.com>
Cc: James E.J. Bottomley <JBottomley@odin.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Michael Terry <Michael.terry@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit b49493f99690c8eaacfbc635bafaad629ea2c036 upstream.
Avoid that kmemleak reports the following memory leak if a
SCSI LLD calls scsi_host_alloc() and scsi_host_put() but neither
scsi_host_add() nor scsi_host_remove(). The following shell
command triggers that scenario:
for ((i=0; i<2; i++)); do
srp_daemon -oac |
while read line; do
echo $line >/sys/class/infiniband_srp/srp-mlx4_0-1/add_target
done
done
unreferenced object 0xffff88021b24a220 (size 8):
comm "srp_daemon", pid 56421, jiffies 4295006762 (age 4240.750s)
hex dump (first 8 bytes):
68 6f 73 74 35 38 00 a5 host58..
backtrace:
[<ffffffff8151014a>] kmemleak_alloc+0x7a/0xc0
[<ffffffff81165c1e>] __kmalloc_track_caller+0xfe/0x160
[<ffffffff81260d2b>] kvasprintf+0x5b/0x90
[<ffffffff81260e2d>] kvasprintf_const+0x8d/0xb0
[<ffffffff81254b0c>] kobject_set_name_vargs+0x3c/0xa0
[<ffffffff81337e3c>] dev_set_name+0x3c/0x40
[<ffffffff81355757>] scsi_host_alloc+0x327/0x4b0
[<ffffffffa03edc8e>] srp_create_target+0x4e/0x8a0 [ib_srp]
[<ffffffff8133778b>] dev_attr_store+0x1b/0x20
[<ffffffff811f27fa>] sysfs_kf_write+0x4a/0x60
[<ffffffff811f1e8e>] kernfs_fop_write+0x14e/0x180
[<ffffffff81176eef>] __vfs_write+0x2f/0xf0
[<ffffffff811771e4>] vfs_write+0xa4/0x100
[<ffffffff81177c64>] SyS_write+0x54/0xc0
[<ffffffff8151b257>] entry_SYSCALL_64_fastpath+0x12/0x6f
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit ca82c2bded29b38d36140bfa1e76a7bbfcade390 upstream.
This patch addresses a case where iscsi_target_do_tx_login_io()
fails sending the last login response PDU, after the RX/TX
threads have already been started.
The case centers around iscsi_target_rx_thread() not invoking
allow_signal(SIGINT) before the send_sig(SIGINT, ...) occurs
from the failure path, resulting in RX thread hanging
indefinately on iscsi_conn->rx_login_comp.
Note this bug is a regression introduced by:
commit e54198657b65625085834847ab6271087323ffea
Author: Nicholas Bellinger <nab@linux-iscsi.org>
Date: Wed Jul 22 23:14:19 2015 -0700
iscsi-target: Fix iscsit_start_kthreads failure OOPs
To address this bug, complete ->rx_login_complete for good
measure in the failure path, and immediately return from
RX thread context if connection state did not actually reach
full feature phase (TARG_CONN_STATE_LOGGED_IN).
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 863e02d0e173bb9d8cea6861be22820b25c076cc upstream.
Writing a number to /sys/bus/scsi/devices/<sdev>/queue_ramp_up_period
returns the value of that number instead of the number of bytes written.
This behavior can confuse programs expecting POSIX write() semantics.
Fix this by returning the number of bytes written instead.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 40998193560dab6c3ce8d25f4fa58a23e252ef38 upstream.
When dropping a lock while iterating a list we must restart the search
as other threads could have manipulated the list under us. Without this
we can get stuck in an endless loop. This bug was introduced by
commit bc3f02a795d3b4faa99d37390174be2a75d091bd
Author: Dan Williams <djbw@fb.com>
Date: Tue Aug 28 22:12:10 2012 -0700
[SCSI] scsi_remove_target: fix softlockup regression on hot remove
Which was itself trying to fix a reported soft lockup issue
http://thread.gmane.org/gmane.linux.kernel/1348679
However, we believe even with this revert of the original patch, the soft
lockup problem has been fixed by
commit f2495e228fce9f9cec84367547813cbb0d6db15a
Author: James Bottomley <JBottomley@Parallels.com>
Date: Tue Jan 21 07:01:41 2014 -0800
[SCSI] dual scan thread bug fix
Thanks go to Dan Williams <dan.j.williams@intel.com> for tracking all this
prior history down.
Reported-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Fixes: bc3f02a795d3b4faa99d37390174be2a75d091bd
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 00cd29b799e3449f0c68b1cc77cd4a5f95b42d17 upstream.
The starting node for a klist iteration is often passed in from
somewhere way above the klist infrastructure, meaning there's no
guarantee the node is still on the list. We've seen this in SCSI where
we use bus_find_device() to iterate through a list of devices. In the
face of heavy hotplug activity, the last device returned by
bus_find_device() can be removed before the next call. This leads to
Dec 3 13:22:02 localhost kernel: WARNING: CPU: 2 PID: 28073 at include/linux/kref.h:47 klist_iter_init_node+0x3d/0x50()
Dec 3 13:22:02 localhost kernel: Modules linked in: scsi_debug x86_pkg_temp_thermal kvm_intel kvm irqbypass crc32c_intel joydev iTCO_wdt dcdbas ipmi_devintf acpi_power_meter iTCO_vendor_support ipmi_si imsghandler pcspkr wmi acpi_cpufreq tpm_tis tpm shpchp lpc_ich mfd_core nfsd nfs_acl lockd grace sunrpc tg3 ptp pps_core
Dec 3 13:22:02 localhost kernel: CPU: 2 PID: 28073 Comm: cat Not tainted 4.4.0-rc1+ #2
Dec 3 13:22:02 localhost kernel: Hardware name: Dell Inc. PowerEdge R320/08VT7V, BIOS 2.0.22 11/19/2013
Dec 3 13:22:02 localhost kernel: ffffffff81a20e77 ffff880613acfd18 ffffffff81321eef 0000000000000000
Dec 3 13:22:02 localhost kernel: ffff880613acfd50 ffffffff8107ca52 ffff88061176b198 0000000000000000
Dec 3 13:22:02 localhost kernel: ffffffff814542b0 ffff880610cfb100 ffff88061176b198 ffff880613acfd60
Dec 3 13:22:02 localhost kernel: Call Trace:
Dec 3 13:22:02 localhost kernel: [<ffffffff81321eef>] dump_stack+0x44/0x55
Dec 3 13:22:02 localhost kernel: [<ffffffff8107ca52>] warn_slowpath_common+0x82/0xc0
Dec 3 13:22:02 localhost kernel: [<ffffffff814542b0>] ? proc_scsi_show+0x20/0x20
Dec 3 13:22:02 localhost kernel: [<ffffffff8107cb4a>] warn_slowpath_null+0x1a/0x20
Dec 3 13:22:02 localhost kernel: [<ffffffff8167225d>] klist_iter_init_node+0x3d/0x50
Dec 3 13:22:02 localhost kernel: [<ffffffff81421d41>] bus_find_device+0x51/0xb0
Dec 3 13:22:02 localhost kernel: [<ffffffff814545ad>] scsi_seq_next+0x2d/0x40
[...]
And an eventual crash. It can actually occur in any hotplug system
which has a device finder and a starting device.
We can fix this globally by making sure the starting node for
klist_iter_init_node() is actually a member of the list before using it
(and by starting from the beginning if it isn't).
Reported-by: Ewan D. Milne <emilne@redhat.com>
Tested-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
