summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-03-26spi: pl022: Fix race in giveback() leading to driver lock-upAlexander Sverdlin
commit cd6fa8d2ca53cac3226fdcffcf763be390abae32 upstream. Commit fd316941c ("spi/pl022: disable port when unused") introduced a race, which leads to possible driver lock up (easily reproducible on SMP). The problem happens in giveback() function where the completion of the transfer is signalled to SPI subsystem and then the HW SPI controller is disabled. Another transfer might be setup in between, which brings driver in locked-up state. Exact event sequence on SMP: core0 core1 => pump_transfers() /* message->state == STATE_DONE */ => giveback() => spi_finalize_current_message() => pl022_unprepare_transfer_hardware() => pl022_transfer_one_message => flush() => do_interrupt_dma_transfer() => set_up_next_transfer() /* Enable SSP, turn on interrupts */ writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE), SSP_CR1(pl022->virtbase)); ... => pl022_interrupt_handler() => readwriter() /* disable the SPI/SSP operation */ => writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase)); Lockup! SPI controller is disabled and the data will never be received. Whole SPI subsystem is waiting for transfer ACK and blocked. So, only signal transfer completion after disabling the controller. Fixes: fd316941c (spi/pl022: disable port when unused) Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26tpm/ibmvtpm: Additional LE support for tpm_ibmvtpm_sendjmlatten@linux.vnet.ibm.com
commit 62dfd912ab3b5405b6fe72d0135c37e9648071f1 upstream. Problem: When IMA and VTPM are both enabled in kernel config, kernel hangs during bootup on LE OS. Why?: IMA calls tpm_pcr_read() which results in tpm_ibmvtpm_send and tpm_ibmtpm_recv getting called. A trace showed that tpm_ibmtpm_recv was hanging. Resolution: tpm_ibmtpm_recv was hanging because tpm_ibmvtpm_send was sending CRQ message that probably did not make much sense to phype because of Endianness. The fix below sends correctly converted CRQ for LE. This was not caught before because it seems IMA is not enabled by default in kernel config and IMA exercises this particular code path in vtpm. Tested with IMA and VTPM enabled in kernel config and VTPM enabled on both a BE OS and a LE OS ppc64 lpar. This exercised CRQ and TPM command code paths in vtpm. Patch is against Peter's tpmdd tree on github which included Vicky's previous vtpm le patches. Signed-off-by: Joy Latten <jmlatten@linux.vnet.ibm.com> Reviewed-by: Ashley Lai <ashley@ahsleylai.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26workqueue: fix hang involving racing cancel[_delayed]_work_sync()'s for ↵Tejun Heo
PREEMPT_NONE commit 8603e1b30027f943cc9c1eef2b291d42c3347af1 upstream. cancel[_delayed]_work_sync() are implemented using __cancel_work_timer() which grabs the PENDING bit using try_to_grab_pending() and then flushes the work item with PENDING set to prevent the on-going execution of the work item from requeueing itself. try_to_grab_pending() can always grab PENDING bit without blocking except when someone else is doing the above flushing during cancelation. In that case, try_to_grab_pending() returns -ENOENT. In this case, __cancel_work_timer() currently invokes flush_work(). The assumption is that the completion of the work item is what the other canceling task would be waiting for too and thus waiting for the same condition and retrying should allow forward progress without excessive busy looping Unfortunately, this doesn't work if preemption is disabled or the latter task has real time priority. Let's say task A just got woken up from flush_work() by the completion of the target work item. If, before task A starts executing, task B gets scheduled and invokes __cancel_work_timer() on the same work item, its try_to_grab_pending() will return -ENOENT as the work item is still being canceled by task A and flush_work() will also immediately return false as the work item is no longer executing. This puts task B in a busy loop possibly preventing task A from executing and clearing the canceling state on the work item leading to a hang. task A task B worker executing work __cancel_work_timer() try_to_grab_pending() set work CANCELING flush_work() block for work completion completion, wakes up A __cancel_work_timer() while (forever) { try_to_grab_pending() -ENOENT as work is being canceled flush_work() false as work is no longer executing } This patch removes the possible hang by updating __cancel_work_timer() to explicitly wait for clearing of CANCELING rather than invoking flush_work() after try_to_grab_pending() fails with -ENOENT. Link: http://lkml.kernel.org/g/20150206171156.GA8942@axis.com v3: bit_waitqueue() can't be used for work items defined in vmalloc area. Switched to custom wake function which matches the target work item and exclusive wait and wakeup. v2: v1 used wake_up() on bit_waitqueue() which leads to NULL deref if the target bit waitqueue has wait_bit_queue's on it. Use DEFINE_WAIT_BIT() and __wake_up_bit() instead. Reported by Tomeu Vizoso. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Rabin Vincent <rabin.vincent@axis.com> Cc: Tomeu Vizoso <tomeu.vizoso@gmail.com> Tested-by: Jesper Nilsson <jesper.nilsson@axis.com> Tested-by: Rabin Vincent <rabin.vincent@axis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26can: add missing initialisations in CAN related skbuffsOliver Hartkopp
commit 969439016d2cf61fef53a973d7e6d2061c3793b1 upstream. When accessing CAN network interfaces with AF_PACKET sockets e.g. by dhclient this can lead to a skb_under_panic due to missing skb initialisations. Add the missing initialisations at the CAN skbuff creation times on driver level (rx path) and in the network layer (tx path). Reported-by: Austin Schuh <austin@peloton-tech.com> Reported-by: Daniel Steer <daniel.steer@mclaren.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26Change email address for 8250_pciRussell King
commit f2e0ea861117bda073d1d7ffbd3120c07c0d5d34 upstream. I'm still receiving reports to my email address, so let's point this at the linux-serial mailing list instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26virtio_console: init work unconditionallyMichael S. Tsirkin
commit 4f6e24ed9de8634d6471ef86b382cba6d4e57ca8 upstream. when multiport is off, we don't initialize config work, but we then cancel uninitialized control_work on freeze. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26fuse: notify: don't move pagesMiklos Szeredi
commit 0d2783626a53d4c922f82d51fa675cb5d13f0d36 upstream. fuse_try_move_page() is not prepared for replacing pages that have already been read. Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26fuse: set stolen page uptodateMiklos Szeredi
commit aa991b3b267e24f578bac7b09cc57579b660304b upstream. Regular pipe buffers' ->steal method (generic_pipe_buf_steal()) doesn't set PG_uptodate. Don't warn on this condition, just set the uptodate flag. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26drm/radeon: drop setting UPLL to sleep modeChristian König
commit a17d4996e051e78d164989b894608cf37cd5110b upstream. Just keep it working, seems to fix some PLL problems. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=73378 Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26drm/radeon: do a posting read in rs600_set_irqAlex Deucher
commit 54acf107e4e66d1f4a697e08a7f60dba9fcf07c3 upstream. To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26drm/radeon: do a posting read in si_set_irqAlex Deucher
commit 0586915ec10d0ae60de5cd3381ad25a704760402 upstream. To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26drm/radeon: do a posting read in r600_set_irqAlex Deucher
commit 9d1393f23d5656cdd5f368efd60694d4aeed81d3 upstream. To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26drm/radeon: do a posting read in r100_set_irqAlex Deucher
commit f957063fee6392bb9365370db6db74dc0b2dce0a upstream. To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26drm/radeon: do a posting read in evergreen_set_irqAlex Deucher
commit c320bb5f6dc0cb88a811cbaf839303e0a3916a92 upstream. To make sure the writes go through the pci bridge. bug: https://bugzilla.kernel.org/show_bug.cgi?id=90741 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26drm/radeon: fix DRM_IOCTL_RADEON_CS oopsTommi Rantala
commit a28b2a47edcd0cb7c051b445f71a426000394606 upstream. Passing zeroed drm_radeon_cs struct to DRM_IOCTL_RADEON_CS produces the following oops. Fix by always calling INIT_LIST_HEAD() to avoid the crash in list_sort(). ---------------------------------- #include <stdint.h> #include <fcntl.h> #include <unistd.h> #include <sys/ioctl.h> #include <drm/radeon_drm.h> static const struct drm_radeon_cs cs; int main(int argc, char **argv) { return ioctl(open(argv[1], O_RDWR), DRM_IOCTL_RADEON_CS, &cs); } ---------------------------------- [ttrantal@test2 ~]$ ./main /dev/dri/card0 [ 46.904650] BUG: unable to handle kernel NULL pointer dereference at (null) [ 46.905022] IP: [<ffffffff814d6df2>] list_sort+0x42/0x240 [ 46.905022] PGD 68f29067 PUD 688b5067 PMD 0 [ 46.905022] Oops: 0002 [#1] SMP [ 46.905022] CPU: 0 PID: 2413 Comm: main Not tainted 4.0.0-rc1+ #58 [ 46.905022] Hardware name: Hewlett-Packard HP Compaq dc5750 Small Form Factor/0A64h, BIOS 786E3 v02.10 01/25/2007 [ 46.905022] task: ffff880058e2bcc0 ti: ffff880058e64000 task.ti: ffff880058e64000 [ 46.905022] RIP: 0010:[<ffffffff814d6df2>] [<ffffffff814d6df2>] list_sort+0x42/0x240 [ 46.905022] RSP: 0018:ffff880058e67998 EFLAGS: 00010246 [ 46.905022] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 46.905022] RDX: ffffffff81644410 RSI: ffff880058e67b40 RDI: ffff880058e67a58 [ 46.905022] RBP: ffff880058e67a88 R08: 0000000000000000 R09: 0000000000000000 [ 46.905022] R10: ffff880058e2bcc0 R11: ffffffff828e6ca0 R12: ffffffff81644410 [ 46.905022] R13: ffff8800694b8018 R14: 0000000000000000 R15: ffff880058e679b0 [ 46.905022] FS: 00007fdc65a65700(0000) GS:ffff88006d600000(0000) knlGS:0000000000000000 [ 46.905022] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 46.905022] CR2: 0000000000000000 CR3: 0000000058dd9000 CR4: 00000000000006f0 [ 46.905022] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 46.905022] DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400 [ 46.905022] Stack: [ 46.905022] ffff880058e67b40 ffff880058e2bcc0 ffff880058e67a78 0000000000000000 [ 46.905022] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 46.905022] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 46.905022] Call Trace: [ 46.905022] [<ffffffff81644a65>] radeon_cs_parser_fini+0x195/0x220 [ 46.905022] [<ffffffff81645069>] radeon_cs_ioctl+0xa9/0x960 [ 46.905022] [<ffffffff815e1f7c>] drm_ioctl+0x19c/0x640 [ 46.905022] [<ffffffff810f8fdd>] ? trace_hardirqs_on_caller+0xfd/0x1c0 [ 46.905022] [<ffffffff810f90ad>] ? trace_hardirqs_on+0xd/0x10 [ 46.905022] [<ffffffff8160c066>] radeon_drm_ioctl+0x46/0x80 [ 46.905022] [<ffffffff81211868>] do_vfs_ioctl+0x318/0x570 [ 46.905022] [<ffffffff81462ef6>] ? selinux_file_ioctl+0x56/0x110 [ 46.905022] [<ffffffff81211b41>] SyS_ioctl+0x81/0xa0 [ 46.905022] [<ffffffff81dc6312>] system_call_fastpath+0x12/0x17 [ 46.905022] Code: 48 89 b5 10 ff ff ff 0f 84 03 01 00 00 4c 8d bd 28 ff ff ff 31 c0 48 89 fb b9 15 00 00 00 49 89 d4 4c 89 ff f3 48 ab 48 8b 46 08 <48> c7 00 00 00 00 00 48 8b 0e 48 85 c9 0f 84 7d 00 00 00 c7 85 [ 46.905022] RIP [<ffffffff814d6df2>] list_sort+0x42/0x240 [ 46.905022] RSP <ffff880058e67998> [ 46.905022] CR2: 0000000000000000 [ 47.149253] ---[ end trace 09576b4e8b2c20b8 ]--- Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26tcp: make connect() mem charging friendlyEric Dumazet
[ Upstream commit 355a901e6cf1b2b763ec85caa2a9f04fbcc4ab4a ] While working on sk_forward_alloc problems reported by Denys Fedoryshchenko, we found that tcp connect() (and fastopen) do not call sk_wmem_schedule() for SYN packet (and/or SYN/DATA packet), so sk_forward_alloc is negative while connect is in progress. We can fix this by calling regular sk_stream_alloc_skb() both for the SYN packet (in tcp_connect()) and the syn_data packet in tcp_send_syn_data() Then, tcp_send_syn_data() can avoid copying syn_data as we simply can manipulate syn_data->cb[] to remove SYN flag (and increment seq) Instead of open coding memcpy_fromiovecend(), simply use this helper. This leaves in socket write queue clean fast clone skbs. This was tested against our fastopen packetdrill tests. Reported-by: Denys Fedoryshchenko <nuclearcat@nuclearcat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26net: compat: Update get_compat_msghdr() to match copy_msghdr_from_user() ↵Catalin Marinas
behaviour [ Upstream commit 91edd096e224941131f896b86838b1e59553696a ] Commit db31c55a6fb2 (net: clamp ->msg_namelen instead of returning an error) introduced the clamping of msg_namelen when the unsigned value was larger than sizeof(struct sockaddr_storage). This caused a msg_namelen of -1 to be valid. The native code was subsequently fixed by commit dbb490b96584 (net: socket: error on a negative msg_namelen). In addition, the native code sets msg_namelen to 0 when msg_name is NULL. This was done in commit (6a2a2b3ae075 net:socket: set msg_namelen to 0 if msg_name is passed as NULL in msghdr struct from userland) and subsequently updated by 08adb7dabd48 (fold verify_iovec() into copy_msghdr_from_user()). This patch brings the get_compat_msghdr() in line with copy_msghdr_from_user(). Fixes: db31c55a6fb2 (net: clamp ->msg_namelen instead of returning an error) Cc: David S. Miller <davem@davemloft.net> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26tcp: fix tcp fin memory accountingJosh Hunt
[ Upstream commit d22e1537181188e5dc8cbc51451832625035bdc2 ] tcp_send_fin() does not account for the memory it allocates properly, so sk_forward_alloc can be negative in cases where we've sent a FIN: ss example output (ss -amn | grep -B1 f4294): tcp FIN-WAIT-1 0 1 192.168.0.1:45520 192.0.2.1:8080 skmem:(r0,rb87380,t0,tb87380,f4294966016,w1280,o0,bl0) Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26Revert "net: cx82310_eth: use common match macro"Ondrej Zary
[ Upstream commit 8d006e0105978619fb472e150c88b0d49337fe2b ] This reverts commit 11ad714b98f6d9ca0067568442afe3e70eb94845 because it breaks cx82310_eth. The custom USB_DEVICE_CLASS macro matches bDeviceClass, bDeviceSubClass and bDeviceProtocol but the common USB_DEVICE_AND_INTERFACE_INFO matches bInterfaceClass, bInterfaceSubClass and bInterfaceProtocol instead, which are not specified. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26rxrpc: bogus MSG_PEEK test in rxrpc_recvmsg()Al Viro
[ Upstream commit 7d985ed1dca5c90535d67ce92ef6ca520302340a ] [I would really like an ACK on that one from dhowells; it appears to be quite straightforward, but...] MSG_PEEK isn't passed to ->recvmsg() via msg->msg_flags; as the matter of fact, neither the kernel users of rxrpc, nor the syscalls ever set that bit in there. It gets passed via flags; in fact, another such check in the same function is done correctly - as flags & MSG_PEEK. It had been that way (effectively disabled) for 8 years, though, so the patch needs beating up - that case had never been tested. If it is correct, it's -stable fodder. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26caif: fix MSG_OOB test in caif_seqpkt_recvmsg()Al Viro
[ Upstream commit 3eeff778e00c956875c70b145c52638c313dfb23 ] It should be checking flags, not msg->msg_flags. It's ->sendmsg() instances that need to look for that in ->msg_flags, ->recvmsg() ones (including the other ->recvmsg() instance in that file, as well as unix_dgram_recvmsg() this one claims to be imitating) check in flags. Braino had been introduced in commit dcda13 ("caif: Bugfix - use MSG_TRUNC in receive") back in 2010, so it goes quite a while back. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26inet_diag: fix possible overflow in inet_diag_dump_one_icsk()Eric Dumazet
[ Upstream commit c8e2c80d7ec00d020320f905822bf49c5ad85250 ] inet_diag_dump_one_icsk() allocates too small skb. Add inet_sk_attr_size() helper right before inet_sk_diag_fill() so that it can be updated if/when new attributes are added. iproute2/ss currently does not use this dump_one() interface, this might explain nobody noticed this problem yet. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26rds: avoid potential stack overflowArnd Bergmann
[ Upstream commit f862e07cf95d5b62a5fc5e981dd7d0dbaf33a501 ] The rds_iw_update_cm_id function stores a large 'struct rds_sock' object on the stack in order to pass a pair of addresses. This happens to just fit withint the 1024 byte stack size warning limit on x86, but just exceed that limit on ARM, which gives us this warning: net/rds/iw_rdma.c:200:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=] As the use of this large variable is basically bogus, we can rearrange the code to not do that. Instead of passing an rds socket into rds_iw_get_device, we now just pass the two addresses that we have available in rds_iw_update_cm_id, and we change rds_iw_get_mr accordingly, to create two address structures on the stack there. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26net: sysctl_net_core: check SNDBUF and RCVBUF for min lengthAlexey Kodanev
[ Upstream commit b1cb59cf2efe7971d3d72a7b963d09a512d994c9 ] sysctl has sysctl.net.core.rmem_*/wmem_* parameters which can be set to incorrect values. Given that 'struct sk_buff' allocates from rcvbuf, incorrectly set buffer length could result to memory allocation failures. For example, set them as follows: # sysctl net.core.rmem_default=64 net.core.wmem_default = 64 # sysctl net.core.wmem_default=64 net.core.wmem_default = 64 # ping localhost -s 1024 -i 0 > /dev/null This could result to the following failure: skbuff: skb_over_panic: text:ffffffff81628db4 len:-32 put:-32 head:ffff88003a1cc200 data:ffff88003a1cc200 tail:0xffffffe0 end:0xc0 dev:<NULL> kernel BUG at net/core/skbuff.c:102! invalid opcode: 0000 [#1] SMP ... task: ffff88003b7f5550 ti: ffff88003ae88000 task.ti: ffff88003ae88000 RIP: 0010:[<ffffffff8155fbd1>] [<ffffffff8155fbd1>] skb_put+0xa1/0xb0 RSP: 0018:ffff88003ae8bc68 EFLAGS: 00010296 RAX: 000000000000008d RBX: 00000000ffffffe0 RCX: 0000000000000000 RDX: ffff88003fdcf598 RSI: ffff88003fdcd9c8 RDI: ffff88003fdcd9c8 RBP: ffff88003ae8bc88 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 00000000000002b2 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88003d3f7300 R15: ffff88000012a900 FS: 00007fa0e2b4a840(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000d0f7e0 CR3: 000000003b8fb000 CR4: 00000000000006f0 Stack: ffff88003a1cc200 00000000ffffffe0 00000000000000c0 ffffffff818cab1d ffff88003ae8bd68 ffffffff81628db4 ffff88003ae8bd48 ffff88003b7f5550 ffff880031a09408 ffff88003b7f5550 ffff88000012aa48 ffff88000012ab00 Call Trace: [<ffffffff81628db4>] unix_stream_sendmsg+0x2c4/0x470 [<ffffffff81556f56>] sock_write_iter+0x146/0x160 [<ffffffff811d9612>] new_sync_write+0x92/0xd0 [<ffffffff811d9cd6>] vfs_write+0xd6/0x180 [<ffffffff811da499>] SyS_write+0x59/0xd0 [<ffffffff81651532>] system_call_fastpath+0x12/0x17 Code: 00 00 48 89 44 24 10 8b 87 c8 00 00 00 48 89 44 24 08 48 8b 87 d8 00 00 00 48 c7 c7 30 db 91 81 48 89 04 24 31 c0 e8 4f a8 0e 00 <0f> 0b eb fe 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 48 83 RIP [<ffffffff8155fbd1>] skb_put+0xa1/0xb0 RSP <ffff88003ae8bc68> Kernel panic - not syncing: Fatal exception Moreover, the possible minimum is 1, so we can get another kernel panic: ... BUG: unable to handle kernel paging request at ffff88013caee5c0 IP: [<ffffffff815604cf>] __alloc_skb+0x12f/0x1f0 ... Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26sparc64: Fix several bugs in memmove().David S. Miller
[ Upstream commit 2077cef4d5c29cf886192ec32066f783d6a80db8 ] Firstly, handle zero length calls properly. Believe it or not there are a few of these happening during early boot. Next, we can't just drop to a memcpy() call in the forward copy case where dst <= src. The reason is that the cache initializing stores used in the Niagara memcpy() implementations can end up clearing out cache lines before we've sourced their original contents completely. For example, considering NG4memcpy, the main unrolled loop begins like this: load src + 0x00 load src + 0x08 load src + 0x10 load src + 0x18 load src + 0x20 store dst + 0x00 Assume dst is 64 byte aligned and let's say that dst is src - 8 for this memcpy() call. That store at the end there is the one to the first line in the cache line, thus clearing the whole line, which thus clobbers "src + 0x28" before it even gets loaded. To avoid this, just fall through to a simple copy only mildly optimized for the case where src and dst are 8 byte aligned and the length is a multiple of 8 as well. We could get fancy and call GENmemcpy() but this is good enough for how this thing is actually used. Reported-by: David Ahern <david.ahern@oracle.com> Reported-by: Bob Picco <bpicco@meloft.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26sparc: Touch NMI watchdog when walking cpus and calling printkDavid Ahern
[ Upstream commit 31aaa98c248da766ece922bbbe8cc78cfd0bc920 ] With the increase in number of CPUs calls to functions that dump output to console (e.g., arch_trigger_all_cpu_backtrace) can take a long time to complete. If IRQs are disabled eventually the NMI watchdog kicks in and creates more havoc. Avoid by telling the NMI watchdog everything is ok. Signed-off-by: David Ahern <david.ahern@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26sparc: perf: Make counting mode actually workDavid Ahern
[ Upstream commit d51291cb8f32bfae6b331e1838651f3ddefa73a5 ] Currently perf-stat (aka, counting mode) does not work: $ perf stat ls ... Performance counter stats for 'ls': 1.585665 task-clock (msec) # 0.580 CPUs utilized 24 context-switches # 0.015 M/sec 0 cpu-migrations # 0.000 K/sec 86 page-faults # 0.054 M/sec <not supported> cycles <not supported> stalled-cycles-frontend <not supported> stalled-cycles-backend <not supported> instructions <not supported> branches <not supported> branch-misses 0.002735100 seconds time elapsed The reason is that state is never reset (stays with PERF_HES_UPTODATE set). Add a call to sparc_pmu_enable_event during the added_event handling. Clean up the encoding since pmu_start calls sparc_pmu_enable_event which does the same. Passing PERF_EF_RELOAD to sparc_pmu_start means the call to sparc_perf_event_set_period can be removed as well. With this patch: $ perf stat ls ... Performance counter stats for 'ls': 1.552890 task-clock (msec) # 0.552 CPUs utilized 24 context-switches # 0.015 M/sec 0 cpu-migrations # 0.000 K/sec 86 page-faults # 0.055 M/sec 5,748,997 cycles # 3.702 GHz <not supported> stalled-cycles-frontend:HG <not supported> stalled-cycles-backend:HG 1,684,362 instructions:HG # 0.29 insns per cycle 295,133 branches:HG # 190.054 M/sec 28,007 branch-misses:HG # 9.49% of all branches 0.002815665 seconds time elapsed Signed-off-by: David Ahern <david.ahern@oracle.com> Acked-by: Bob Picco <bob.picco@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26sparc: perf: Remove redundant perf_pmu_{en|dis}able callsDavid Ahern
[ Upstream commit 5b0d4b5514bbcce69b516d0742f2cfc84ebd6db3 ] perf_pmu_disable is called by core perf code before pmu->del and the enable function is called by core perf code afterwards. No need to call again within sparc_pmu_del. Ditto for pmu->add and sparc_pmu_add. Signed-off-by: David Ahern <david.ahern@oracle.com> Acked-by: Bob Picco <bob.picco@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26sparc: semtimedop() unreachable due to comparison errorRob Gardner
[ Upstream commit 53eb2516972b8c4628651dfcb926cb9ef8b2864a ] A bug was reported that the semtimedop() system call was always failing eith ENOSYS. Since SEMCTL is defined as 3, and SEMTIMEDOP is defined as 4, the comparison "call <= SEMCTL" will always prevent SEMTIMEDOP from getting through to the semaphore ops switch statement. This is corrected by changing the comparison to "call <= SEMTIMEDOP". Orabug: 20633375 Signed-off-by: Rob Gardner <rob.gardner@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26sparc32: destroy_context() and switch_mm() needs to disable interrupts.Andreas Larsson
[ Upstream commit 66d0f7ec9f1038452178b1993fc07fd96d30fd38 ] Load balancing can be triggered in the critical sections protected by srmmu_context_spinlock in destroy_context() and switch_mm() and can hang the cpu waiting for the rq lock of another cpu that in turn has called switch_mm hangning on srmmu_context_spinlock leading to deadlock. So, disable interrupt while taking srmmu_context_spinlock in destroy_context() and switch_mm() so we don't deadlock. See also commit 77b838fa1ef0 ("[SPARC64]: destroy_context() needs to disable interrupts.") Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18Linux 3.10.72v3.10.72Greg Kroah-Hartman
2015-03-18ath5k: fix spontaneus AR5312 freezesSergey Ryazanov
commit 8bfae4f9938b6c1f033a5159febe97e441d6d526 upstream. Sometimes while CPU have some load and ath5k doing the wireless interface reset the whole WiSoC completely freezes. Set of tests shows that using atomic delay function while we wait interface reset helps to avoid such freezes. The easiest way to reproduce this issue: create a station interface, start continous scan with wpa_supplicant and load CPU by something. Or just create multiple station interfaces and put them all in continous scan. This patch partially reverts the commit 1846ac3dbec0 ("ath5k: Use usleep_range where possible"), which replaces initial udelay() by usleep_range(). I do not know actual source of this issue, but all looks like that HW freeze is caused by transaction on internal SoC bus, while wireless block is in reset state. Also I should note that I do not know how many chips are affected, but I did not see this issue with chips, other than AR5312. CC: Jiri Slaby <jirislaby@gmail.com> CC: Nick Kossifidis <mickflemm@gmail.com> CC: Luis R. Rodriguez <mcgrof@do-not-panic.com> Fixes: 1846ac3dbec0 ("ath5k: Use usleep_range where possible") Reported-by: Christophe Prevotaux <c.prevotaux@rural-networks.com> Tested-by: Christophe Prevotaux <c.prevotaux@rural-networks.com> Tested-by: Eric Bree <ebree@nltinc.com> Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18ACPI / video: Load the module even if ACPI is disabledChris Wilson
commit 6e17cb12881ba8d5e456b89f072dc6b70048af36 upstream. i915.ko depends upon the acpi/video.ko module and so refuses to load if ACPI is disabled at runtime if for example the BIOS is broken beyond repair. acpi/video provides an optional service for i915.ko and so we should just allow the modules to load, but do no nothing in order to let the machines boot correctly. Reported-by: Bill Augur <bill-auger@programmer.net> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@intel.com> Acked-by: Aaron Lu <aaron.lu@intel.com> [ rjw: Fixed up the new comment in acpi_video_init() ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18drm/radeon: fix 1 RB harvest config setup for TN/RLAlex Deucher
commit dbfb00c3e7e18439f2ebf67fe99bf7a50b5bae1e upstream. The logic was reversed from what the hw actually exposed. Fixes graphics corruption in certain harvest configurations. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18Drivers: hv: vmbus: incorrect device name is printed when child device is ↵Fernando Soto
unregistered commit 84672369ffb98a51d4ddf74c20a23636da3ad615 upstream. Whenever a device is unregistered in vmbus_device_unregister (drivers/hv/vmbus_drv.c), the device name in the log message may contain garbage as the memory has already been freed by the time pr_info is called. Log example: [ 3149.170475] hv_vmbus: child device àõsèè0_5 unregistered By logging the message just before calling device_unregister, the correct device name is printed: [ 3145.034652] hv_vmbus: child device vmbus_0_5 unregistered Also changing register & unregister messages to debug to avoid unnecessarily cluttering the kernel log. Signed-off-by: Fernando M Soto <fsoto@bluecatnetworks.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Cc: Joseph Salisbury <joseph.salisbury@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18HID: fixup the conflicting keyboard mappings quirkJiri Kosina
commit 8e7b341037db1835ee6eea64663013cbfcf33575 upstream. The ignore check that got added in 6ce901eb61 ("HID: input: fix confusion on conflicting mappings") needs to properly check for VARIABLE reports as well (ARRAY reports should be ignored), otherwise legitimate keyboards might break. Fixes: 6ce901eb61 ("HID: input: fix confusion on conflicting mappings") Reported-by: Fredrik Hallenberg <megahallon@gmail.com> Reported-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18HID: input: fix confusion on conflicting mappingsDavid Herrmann
commit 6ce901eb61aa30ba8565c62049ee80c90728ef14 upstream. On an PC-101/103/104 keyboard (American layout) the 'Enter' key and its neighbours look like this: +---+ +---+ +-------+ | 1 | | 2 | | 5 | +---+ +---+ +-------+ +---+ +-----------+ | 3 | | 4 | +---+ +-----------+ On a PC-102/105 keyboard (European layout) it looks like this: +---+ +---+ +-------+ | 1 | | 2 | | | +---+ +---+ +-+ 4 | +---+ +---+ | | | 3 | | 5 | | | +---+ +---+ +-----+ (Note that the number of keys is the same, but key '5' is moved down and the shape of key '4' is changed. Keys '1' to '3' are exactly the same.) The keys 1-4 report the same scan-code in HID in both layouts, even though the keysym they produce is usually different depending on the XKB-keymap used by user-space. However, key '5' (US 'backslash'/'pipe') reports 0x31 for the upper layout and 0x32 for the lower layout, as defined by the HID spec. This is highly confusing as the linux-input API uses a single keycode for both. So far, this was never a problem as there never has been a keyboard with both of those keys present at the same time. It would have to look something like this: +---+ +---+ +-------+ | 1 | | 2 | | x31 | +---+ +---+ +-------+ +---+ +---+ +-----+ | 3 | |x32| | 4 | +---+ +---+ +-----+ HID can represent such a keyboard, but the linux-input API cannot. Furthermore, any user-space mapping would be confused by this and, luckily, no-one ever produced such hardware. Now, the HID input layer fixed this mess by mapping both 0x31 and 0x32 to the same keycode (KEY_BACKSLASH==0x2b). As only one of both physical keys is present on a hardware, this works just fine. Lets introduce hardware-vendors into this: ------------------------------------------ Unfortunately, it seems way to expensive to produce a different device for American and European layouts. Therefore, hardware-vendors put both keys, (0x31 and 0x32) on the same keyboard, but only one of them is hooked up to the physical button, the other one is 'dead'. This means, they can use the same hardware, with a different button-layout and automatically produce the correct HID events for American *and* European layouts. This is unproblematic for normal keyboards, as the 'dead' key will never report any KEY-DOWN events. But RollOver keyboards send the whole matrix on each key-event, allowing n-key roll-over mode. This means, we get a 0x31 and 0x32 event on each key-press. One of them will always be 0, the other reports the real state. As we map both to the same keycode, we will get spurious key-events, even though the real key-state never changed. The easiest way would be to blacklist 'dead' keys and never handle those. We could simply read the 'country' tag of USB devices and blacklist either key according to the layout. But... hardware vendors... want the same device for all countries and thus many of them set 'country' to 0 for all devices. Meh.. So we have to deal with this properly. As we cannot know which of the keys is 'dead', we either need a heuristic and track those keys, or we simply make use of our value-tracking for HID fields. We simply ignore HID events for absolute data if the data didn't change. As HID tracks events on the HID level, we haven't done the keycode translation, yet. Therefore, the 'dead' key is tracked independently of the real key, therefore, any events on it will be ignored. This patch simply discards any HID events for absolute data if it didn't change compared to the last report. We need to ignore relative and buffered-byte reports for obvious reasons. But those cannot be affected by this bug, so we're fine. Preferably, we'd do this filtering on the HID-core level. But this might break a lot of custom drivers, if they do not follow the HID specs. Therefore, we do this late in hid-input just before we inject it into the input layer (which does the exact same filtering, but on the keycode level). If this turns out to break some devices, we might have to limit filtering to EV_KEY events. But lets try to do the Right Thing first, and properly filter any absolute data that didn't change. This patch is tagged for 'stable' as it fixes a lot of n-key RollOver hardware. We might wanna wait with backporting for a while, before we know it doesn't break anything else, though. Reported-by: Adam Goode <adam@spicenitz.org> Reported-by: Fredrik Hallenberg <megahallon@gmail.com> Tested-by: Fredrik Hallenberg <megahallon@gmail.com> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18staging: comedi: cb_pcidas64: fix incorrect AI range code handlingIan Abbott
commit be8e89087ec2d2c8a1ad1e3db64bf4efdfc3c298 upstream. The hardware range code values and list of valid ranges for the AI subdevice is incorrect for several supported boards. The hardware range code values for all boards except PCI-DAS4020/12 is determined by calling `ai_range_bits_6xxx()` based on the maximum voltage of the range and whether it is bipolar or unipolar, however it only returns the correct hardware range code for the PCI-DAS60xx boards. For PCI-DAS6402/16 (and /12) it returns the wrong code for the unipolar ranges. For PCI-DAS64/Mx/16 it returns the wrong code for all the ranges and the comedi range table is incorrect. Change `ai_range_bits_6xxx()` to use a look-up table pointed to by new member `ai_range_codes` of `struct pcidas64_board` to map the comedi range table indices to the hardware range codes. Use a new comedi range table for the PCI-DAS64/Mx/16 boards (and the commented out variants). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18dm snapshot: fix a possible invalid memory access on unloadMikulas Patocka
commit 22aa66a3ee5b61e0f4a0bfeabcaa567861109ec3 upstream. When the snapshot target is unloaded, snapshot_dtr() waits until pending_exceptions_count drops to zero. Then, it destroys the snapshot. Therefore, the function that decrements pending_exceptions_count should not touch the snapshot structure after the decrement. pending_complete() calls free_pending_exception(), which decrements pending_exceptions_count, and then it performs up_write(&s->lock) and it calls retry_origin_bios() which dereferences s->origin. These two memory accesses to the fields of the snapshot may touch the dm_snapshot struture after it is freed. This patch moves the call to free_pending_exception() to the end of pending_complete(), so that the snapshot will not be destroyed while pending_complete() is in progress. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18dm: fix a race condition in dm_get_mdMikulas Patocka
commit 2bec1f4a8832e74ebbe859f176d8a9cb20dd97f4 upstream. The function dm_get_md finds a device mapper device with a given dev_t, increases the reference count and returns the pointer. dm_get_md calls dm_find_md, dm_find_md takes _minor_lock, finds the device, tests that the device doesn't have DMF_DELETING or DMF_FREEING flag, drops _minor_lock and returns pointer to the device. dm_get_md then calls dm_get. dm_get calls BUG if the device has the DMF_FREEING flag, otherwise it increments the reference count. There is a possible race condition - after dm_find_md exits and before dm_get is called, there are no locks held, so the device may disappear or DMF_FREEING flag may be set, which results in BUG. To fix this bug, we need to call dm_get while we hold _minor_lock. This patch renames dm_find_md to dm_get_md and changes it so that it calls dm_get while holding the lock. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18dm io: reject unsupported DISCARD requests with EOPNOTSUPPDarrick J. Wong
commit 37527b869207ad4c208b1e13967d69b8bba1fbf9 upstream. I created a dm-raid1 device backed by a device that supports DISCARD and another device that does NOT support DISCARD with the following dm configuration: # echo '0 2048 mirror core 1 512 2 /dev/sda 0 /dev/sdb 0' | dmsetup create moo # lsblk -D NAME DISC-ALN DISC-GRAN DISC-MAX DISC-ZERO sda 0 4K 1G 0 `-moo (dm-0) 0 4K 1G 0 sdb 0 0B 0B 0 `-moo (dm-0) 0 4K 1G 0 Notice that the mirror device /dev/mapper/moo advertises DISCARD support even though one of the mirror halves doesn't. If I issue a DISCARD request (via fstrim, mount -o discard, or ioctl BLKDISCARD) through the mirror, kmirrord gets stuck in an infinite loop in do_region() when it tries to issue a DISCARD request to sdb. The problem is that when we call do_region() against sdb, num_sectors is set to zero because q->limits.max_discard_sectors is zero. Therefore, "remaining" never decreases and the loop never terminates. To fix this: before entering the loop, check for the combination of REQ_DISCARD and no discard and return -EOPNOTSUPP to avoid hanging up the mirror device. This bug was found by the unfortunate coincidence of pvmove and a discard operation in the RHEL 6.5 kernel; upstream is also affected. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Acked-by: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18dm mirror: do not degrade the mirror on discard errorMikulas Patocka
commit f2ed51ac64611d717d1917820a01930174c2f236 upstream. It may be possible that a device claims discard support but it rejects discards with -EOPNOTSUPP. It happens when using loopback on ext2/ext3 filesystem driven by the ext4 driver. It may also happen if the underlying devices are moved from one disk on another. If discard error happens, we reject the bio with -EOPNOTSUPP, but we do not degrade the array. This patch fixes failed test shell/lvconvert-repair-transient.sh in the lvm2 testsuite if the testsuite is extracted on an ext2 or ext3 filesystem and it is being driven by the ext4 driver. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18staging: comedi: comedi_compat32.c: fix COMEDI_CMD copy backIan Abbott
commit 42b8ce6f55facfa101462e694d33fc6bca471138 upstream. `do_cmd_ioctl()` in "comedi_fops.c" handles the `COMEDI_CMD` ioctl. This returns `-EAGAIN` if it has copied a modified `struct comedi_cmd` back to user-space. (This occurs when the low-level Comedi driver's `do_cmdtest()` handler returns non-zero to indicate a problem with the contents of the `struct comedi_cmd`, or when the `struct comedi_cmd` has the `CMDF_BOGUS` flag set.) `compat_cmd()` in "comedi_compat32.c" handles the 32-bit compatible version of the `COMEDI_CMD` ioctl. Currently, it never copies a 32-bit compatible version of `struct comedi_cmd` back to user-space, which is at odds with the way the regular `COMEDI_CMD` ioctl is handled. To fix it, change `compat_cmd()` to copy a 32-bit compatible version of the `struct comedi_cmd` back to user-space when the main ioctl handler returns `-EAGAIN`. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18clk: sunxi: Support factor clocks with N factor starting not from 0Chen-Yu Tsai
commit 9a5e6c7eb5ccbb5f0d3a1dffce135f0a727f40e1 upstream. The PLLs on newer Allwinner SoC's, such as the A31 and A23, have a N multiplier factor that starts from 1, not 0. This patch adds an option to the factor clk driver's config data structures to specify the base value of N. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18fixed invalid assignment of 64bit mask to host dma_boundary for scatter ↵Minh Duc Tran
gather segment boundary limit. commit f76a610a8b4b6280eaedf48f3af9d5d74e418b66 upstream. In reference to bug https://bugzilla.redhat.com/show_bug.cgi?id=1097141 Assert is seen with AMD cpu whenever calling pci_alloc_consistent. [ 29.406183] ------------[ cut here ]------------ [ 29.410505] kernel BUG at lib/iommu-helper.c:13! Signed-off-by: Minh Tran <minh.tran@emulex.com> Fixes: 6733b39a1301b0b020bbcbf3295852e93e624cb1 Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18nilfs2: fix potential memory overrun on inodeRyusuke Konishi
commit 957ed60b53b519064a54988c4e31e0087e47d091 upstream. Each inode of nilfs2 stores a root node of a b-tree, and it turned out to have a memory overrun issue: Each b-tree node of nilfs2 stores a set of key-value pairs and the number of them (in "bn_nchildren" member of nilfs_btree_node struct), as well as a few other "bn_*" members. Since the value of "bn_nchildren" is used for operations on the key-values within the b-tree node, it can cause memory access overrun if a large number is incorrectly set to "bn_nchildren". For instance, nilfs_btree_node_lookup() function determines the range of binary search with it, and too large "bn_nchildren" leads nilfs_btree_node_get_key() in that function to overrun. As for intermediate b-tree nodes, this is prevented by a sanity check performed when each node is read from a drive, however, no sanity check has been done for root nodes stored in inodes. This patch fixes the issue by adding missing sanity check against b-tree root nodes so that it's called when on-memory inodes are read from ifile, inode metadata file. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18IB/qib: Do not write EEPROMMitko Haralanov
commit 18c0b82a3e4501511b08d0e8676fb08ac08734a3 upstream. This changeset removes all the code that allows the driver to write to the EEPROM and update the recorded error counters and power on hours. These two stats are unused and writing them exposes a timing risk which could leave the EEPROM in a bad state preventing further normal operation of the HCA. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18sg: fix read() error reportingTony Battersby
commit 3b524a683af8991b4eab4182b947c65f0ce1421b upstream. Fix SCSI generic read() incorrectly returning success after detecting an error. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18ALSA: hda - Add pin configs for ASUS mobo with IDT 92HD73XX codecTakashi Iwai
commit 6426460e5d87810e042962281fe3c1e8fc256162 upstream. BIOS doesn't seem to set up pins for 5.1 and the SPDIF out, so we need to give explicitly here. Reported-and-tested-by: Misan Thropos <misanthropos@gmx.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18ALSA: pcm: Don't leave PREPARED state after drainingTakashi Iwai
commit 70372a7566b5e552dbe48abdac08c275081d8558 upstream. When a PCM draining is performed to an empty stream that has been already in PREPARED state, the current code just ignores and leaves as it is, although the drain is supposed to set all such streams to SETUP state. This patch covers that overlooked case. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>