summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-05-07hrtimer: Fix ktime_add_ns() overflow on 32bit architecturesDavid Engraf
commit 51fd36f3fad8447c487137ae26b9d0b3ce77bb25 upstream. One can trigger an overflow when using ktime_add_ns() on a 32bit architecture not supporting CONFIG_KTIME_SCALAR. When passing a very high value for u64 nsec, e.g. 7881299347898368000 the do_div() function converts this value to seconds (7881299347) which is still to high to pass to the ktime_set() function as long. The result in is a negative value. The problem on my system occurs in the tick-sched.c, tick_nohz_stop_sched_tick() when time_delta is set to timekeeping_max_deferment(). The check for time_delta < KTIME_MAX is valid, thus ktime_add_ns() is called with a too large value resulting in a negative expire value. This leads to an endless loop in the ticker code: time_delta: 7881299347898368000 expires = ktime_add_ns(last_update, time_delta) expires: negative value This fix caps the value to KTIME_MAX. This error doesn't occurs on 64bit or architectures supporting CONFIG_KTIME_SCALAR (e.g. ARM, x86-32). Signed-off-by: David Engraf <david.engraf@sysgo.com> [jstultz: Minor tweaks to commit message & header] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07ASoC: max98088: Fix logging of hardware revision.Dylan Reid
commit 98682063549bedd6e2d2b6b7222f150c6fbce68c upstream. The hardware revision of the codec is based at 0x40. Subtract that before convering to ASCII. The same as it is done for 98095. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07ALSA: usb-audio: Fix autopm error during probingTakashi Iwai
commit 60af3d037eb8c670dcce31401501d1271e7c5d95 upstream. We've got strange errors in get_ctl_value() in mixer.c during probing, e.g. on Hercules RMX2 DJ Controller: ALSA mixer.c:352 cannot get ctl value: req = 0x83, wValue = 0x201, wIndex = 0xa00, type = 4 ALSA mixer.c:352 cannot get ctl value: req = 0x83, wValue = 0x200, wIndex = 0xa00, type = 4 .... It turned out that the culprit is autopm: snd_usb_autoresume() returns -ENODEV when called during card->probing = 1. Since the call itself during card->probing = 1 is valid, let's fix the return value of snd_usb_autoresume() as success. Reported-and-tested-by: Daniel Schürmann <daschuer@mixxx.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07ALSA: usb-audio: disable autopm for MIDI devicesClemens Ladisch
commit cbc200bca4b51a8e2406d4b654d978f8503d430b upstream. Commit 88a8516a2128 (ALSA: usbaudio: implement USB autosuspend) introduced autopm for all USB audio/MIDI devices. However, many MIDI devices, such as synthesizers, do not merely transmit MIDI messages but use their MIDI inputs to control other functions. With autopm, these devices would get powered down as soon as the last MIDI port device is closed on the host. Even some plain MIDI interfaces could get broken: they automatically send Active Sensing messages while powered up, but as soon as these messages cease, the receiving device would interpret this as an accidental disconnection. Commit f5f165418cab (ALSA: usb-audio: Fix missing autopm for MIDI input) introduced another regression: some devices (e.g. the Roland GAIA SH-01) are self-powered but do a reset whenever the USB interface's power state changes. To work around all this, just disable autopm for all USB MIDI devices. Reported-by: Laurens Holst Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07fs/fscache/stats.c: fix memory leakAnurup m
commit ec686c9239b4d472052a271c505d04dae84214cc upstream. There is a kernel memory leak observed when the proc file /proc/fs/fscache/stats is read. The reason is that in fscache_stats_open, single_open is called and the respective release function is not called during release. Hence fix with correct release function - single_release(). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=57101 Signed-off-by: Anurup m <anurup.m@huawei.com> Cc: shyju pv <shyju.pv@huawei.com> Cc: Sanil kumar <sanil.kumar@huawei.com> Cc: Nataraj m <nataraj.m@huawei.com> Cc: Li Zefan <lizefan@huawei.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07Wrong asm register contraints in the kvm implementationStephan Schreiber
commit de53e9caa4c6149ef4a78c2f83d7f5b655848767 upstream. The Linux Kernel contains some inline assembly source code which has wrong asm register constraints in arch/ia64/kvm/vtlb.c. I observed this on Kernel 3.2.35 but it is also true on the most recent Kernel 3.9-rc1. File arch/ia64/kvm/vtlb.c: u64 guest_vhpt_lookup(u64 iha, u64 *pte) { u64 ret; struct thash_data *data; data = __vtr_lookup(current_vcpu, iha, D_TLB); if (data != NULL) thash_vhpt_insert(current_vcpu, data->page_flags, data->itir, iha, D_TLB); asm volatile ( "rsm psr.ic|psr.i;;" "srlz.d;;" "ld8.s r9=[%1];;" "tnat.nz p6,p7=r9;;" "(p6) mov %0=1;" "(p6) mov r9=r0;" "(p7) extr.u r9=r9,0,53;;" "(p7) mov %0=r0;" "(p7) st8 [%2]=r9;;" "ssm psr.ic;;" "srlz.d;;" "ssm psr.i;;" "srlz.d;;" : "=r"(ret) : "r"(iha), "r"(pte):"memory"); return ret; } The list of output registers is : "=r"(ret) : "r"(iha), "r"(pte):"memory"); The constraint "=r" means that the GCC has to maintain that these vars are in registers and contain valid info when the program flow leaves the assembly block (output registers). But "=r" also means that GCC can put them in registers that are used as input registers. Input registers are iha, pte on the example. If the predicate p7 is true, the 8th assembly instruction "(p7) mov %0=r0;" is the first one which writes to a register which is maintained by the register constraints; it sets %0. %0 means the first register operand; it is ret here. This instruction might overwrite the %2 register (pte) which is needed by the next instruction: "(p7) st8 [%2]=r9;;" Whether it really happens depends on how GCC decides what registers it uses and how it optimizes the code. The attached patch fixes the register operand constraints in arch/ia64/kvm/vtlb.c. The register constraints should be : "=&r"(ret) : "r"(iha), "r"(pte):"memory"); The & means that GCC must not use any of the input registers to place this output register in. This is Debian bug#702639 (http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=702639). The patch is applicable on Kernel 3.9-rc1, 3.2.35 and many other versions. Signed-off-by: Stephan Schreiber <info@fs-driver.org> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07Wrong asm register contraints in the futex implementationStephan Schreiber
commit 136f39ddc53db3bcee2befbe323a56d4fbf06da8 upstream. The Linux Kernel contains some inline assembly source code which has wrong asm register constraints in arch/ia64/include/asm/futex.h. I observed this on Kernel 3.2.23 but it is also true on the most recent Kernel 3.9-rc1. File arch/ia64/include/asm/futex.h: static inline int futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, u32 oldval, u32 newval) { if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))) return -EFAULT; { register unsigned long r8 __asm ("r8"); unsigned long prev; __asm__ __volatile__( " mf;; \n" " mov %0=r0 \n" " mov ar.ccv=%4;; \n" "[1:] cmpxchg4.acq %1=[%2],%3,ar.ccv \n" " .xdata4 \"__ex_table\", 1b-., 2f-. \n" "[2:]" : "=r" (r8), "=r" (prev) : "r" (uaddr), "r" (newval), "rO" ((long) (unsigned) oldval) : "memory"); *uval = prev; return r8; } } The list of output registers is : "=r" (r8), "=r" (prev) The constraint "=r" means that the GCC has to maintain that these vars are in registers and contain valid info when the program flow leaves the assembly block (output registers). But "=r" also means that GCC can put them in registers that are used as input registers. Input registers are uaddr, newval, oldval on the example. The second assembly instruction " mov %0=r0 \n" is the first one which writes to a register; it sets %0 to 0. %0 means the first register operand; it is r8 here. (The r0 is read-only and always 0 on the Itanium; it can be used if an immediate zero value is needed.) This instruction might overwrite one of the other registers which are still needed. Whether it really happens depends on how GCC decides what registers it uses and how it optimizes the code. The objdump utility can give us disassembly. The futex_atomic_cmpxchg_inatomic() function is inline, so we have to look for a module that uses the funtion. This is the cmpxchg_futex_value_locked() function in kernel/futex.c: static int cmpxchg_futex_value_locked(u32 *curval, u32 __user *uaddr, u32 uval, u32 newval) { int ret; pagefault_disable(); ret = futex_atomic_cmpxchg_inatomic(curval, uaddr, uval, newval); pagefault_enable(); return ret; } Now the disassembly. At first from the Kernel package 3.2.23 which has been compiled with GCC 4.4, remeber this Kernel seemed to work: objdump -d linux-3.2.23/debian/build/build_ia64_none_mckinley/kernel/futex.o 0000000000000230 <cmpxchg_futex_value_locked>: 230: 0b 18 80 1b 18 21 [MMI] adds r3=3168,r13;; 236: 80 40 0d 00 42 00 adds r8=40,r3 23c: 00 00 04 00 nop.i 0x0;; 240: 0b 50 00 10 10 10 [MMI] ld4 r10=[r8];; 246: 90 08 28 00 42 00 adds r9=1,r10 24c: 00 00 04 00 nop.i 0x0;; 250: 09 00 00 00 01 00 [MMI] nop.m 0x0 256: 00 48 20 20 23 00 st4 [r8]=r9 25c: 00 00 04 00 nop.i 0x0;; 260: 08 10 80 06 00 21 [MMI] adds r2=32,r3 266: 00 00 00 02 00 00 nop.m 0x0 26c: 02 08 f1 52 extr.u r16=r33,0,61 270: 05 40 88 00 08 e0 [MLX] addp4 r8=r34,r0 276: ff ff 0f 00 00 e0 movl r15=0xfffffffbfff;; 27c: f1 f7 ff 65 280: 09 70 00 04 18 10 [MMI] ld8 r14=[r2] 286: 00 00 00 02 00 c0 nop.m 0x0 28c: f0 80 1c d0 cmp.ltu p6,p7=r15,r16;; 290: 08 40 fc 1d 09 3b [MMI] cmp.eq p8,p9=-1,r14 296: 00 00 00 02 00 40 nop.m 0x0 29c: e1 08 2d d0 cmp.ltu p10,p11=r14,r33 2a0: 56 01 10 00 40 10 [BBB] (p10) br.cond.spnt.few 2e0 <cmpxchg_futex_value_locked+0xb0> 2a6: 02 08 00 80 21 03 (p08) br.cond.dpnt.few 2b0 <cmpxchg_futex_value_locked+0x80> 2ac: 40 00 00 41 (p06) br.cond.spnt.few 2e0 <cmpxchg_futex_value_locked+0xb0> 2b0: 0a 00 00 00 22 00 [MMI] mf;; 2b6: 80 00 00 00 42 00 mov r8=r0 2bc: 00 00 04 00 nop.i 0x0 2c0: 0b 00 20 40 2a 04 [MMI] mov.m ar.ccv=r8;; 2c6: 10 1a 85 22 20 00 cmpxchg4.acq r33=[r33],r35,ar.ccv 2cc: 00 00 04 00 nop.i 0x0;; 2d0: 10 00 84 40 90 11 [MIB] st4 [r32]=r33 2d6: 00 00 00 02 00 00 nop.i 0x0 2dc: 20 00 00 40 br.few 2f0 <cmpxchg_futex_value_locked+0xc0> 2e0: 09 40 c8 f9 ff 27 [MMI] mov r8=-14 2e6: 00 00 00 02 00 00 nop.m 0x0 2ec: 00 00 04 00 nop.i 0x0;; 2f0: 0b 58 20 1a 19 21 [MMI] adds r11=3208,r13;; 2f6: 20 01 2c 20 20 00 ld4 r18=[r11] 2fc: 00 00 04 00 nop.i 0x0;; 300: 0b 88 fc 25 3f 23 [MMI] adds r17=-1,r18;; 306: 00 88 2c 20 23 00 st4 [r11]=r17 30c: 00 00 04 00 nop.i 0x0;; 310: 11 00 00 00 01 00 [MIB] nop.m 0x0 316: 00 00 00 02 00 80 nop.i 0x0 31c: 08 00 84 00 br.ret.sptk.many b0;; The lines 2b0: 0a 00 00 00 22 00 [MMI] mf;; 2b6: 80 00 00 00 42 00 mov r8=r0 2bc: 00 00 04 00 nop.i 0x0 2c0: 0b 00 20 40 2a 04 [MMI] mov.m ar.ccv=r8;; 2c6: 10 1a 85 22 20 00 cmpxchg4.acq r33=[r33],r35,ar.ccv 2cc: 00 00 04 00 nop.i 0x0;; are the instructions of the assembly block. The line 2b6: 80 00 00 00 42 00 mov r8=r0 sets the r8 register to 0 and after that 2c0: 0b 00 20 40 2a 04 [MMI] mov.m ar.ccv=r8;; prepares the 'oldvalue' for the cmpxchg but it takes it from r8. This is wrong. What happened here is what I explained above: An input register is overwritten which is still needed. The register operand constraints in futex.h are wrong. (The problem doesn't occur when the Kernel is compiled with GCC 4.6.) The attached patch fixes the register operand constraints in futex.h. The code after patching of it: static inline int futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, u32 oldval, u32 newval) { if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))) return -EFAULT; { register unsigned long r8 __asm ("r8") = 0; unsigned long prev; __asm__ __volatile__( " mf;; \n" " mov ar.ccv=%4;; \n" "[1:] cmpxchg4.acq %1=[%2],%3,ar.ccv \n" " .xdata4 \"__ex_table\", 1b-., 2f-. \n" "[2:]" : "+r" (r8), "=&r" (prev) : "r" (uaddr), "r" (newval), "rO" ((long) (unsigned) oldval) : "memory"); *uval = prev; return r8; } } I also initialized the 'r8' var with the C programming language. The _asm qualifier on the definition of the 'r8' var forces GCC to use the r8 processor register for it. I don't believe that we should use inline assembly for zeroing out a local variable. The constraint is "+r" (r8) what means that it is both an input register and an output register. Note that the page fault handler will modify the r8 register which will be the return value of the function. The real fix is "=&r" (prev) The & means that GCC must not use any of the input registers to place this output register in. Patched the Kernel 3.2.23 and compiled it with GCC4.4: 0000000000000230 <cmpxchg_futex_value_locked>: 230: 0b 18 80 1b 18 21 [MMI] adds r3=3168,r13;; 236: 80 40 0d 00 42 00 adds r8=40,r3 23c: 00 00 04 00 nop.i 0x0;; 240: 0b 50 00 10 10 10 [MMI] ld4 r10=[r8];; 246: 90 08 28 00 42 00 adds r9=1,r10 24c: 00 00 04 00 nop.i 0x0;; 250: 09 00 00 00 01 00 [MMI] nop.m 0x0 256: 00 48 20 20 23 00 st4 [r8]=r9 25c: 00 00 04 00 nop.i 0x0;; 260: 08 10 80 06 00 21 [MMI] adds r2=32,r3 266: 20 12 01 10 40 00 addp4 r34=r34,r0 26c: 02 08 f1 52 extr.u r16=r33,0,61 270: 05 40 00 00 00 e1 [MLX] mov r8=r0 276: ff ff 0f 00 00 e0 movl r15=0xfffffffbfff;; 27c: f1 f7 ff 65 280: 09 70 00 04 18 10 [MMI] ld8 r14=[r2] 286: 00 00 00 02 00 c0 nop.m 0x0 28c: f0 80 1c d0 cmp.ltu p6,p7=r15,r16;; 290: 08 40 fc 1d 09 3b [MMI] cmp.eq p8,p9=-1,r14 296: 00 00 00 02 00 40 nop.m 0x0 29c: e1 08 2d d0 cmp.ltu p10,p11=r14,r33 2a0: 56 01 10 00 40 10 [BBB] (p10) br.cond.spnt.few 2e0 <cmpxchg_futex_value_locked+0xb0> 2a6: 02 08 00 80 21 03 (p08) br.cond.dpnt.few 2b0 <cmpxchg_futex_value_locked+0x80> 2ac: 40 00 00 41 (p06) br.cond.spnt.few 2e0 <cmpxchg_futex_value_locked+0xb0> 2b0: 0b 00 00 00 22 00 [MMI] mf;; 2b6: 00 10 81 54 08 00 mov.m ar.ccv=r34 2bc: 00 00 04 00 nop.i 0x0;; 2c0: 09 58 8c 42 11 10 [MMI] cmpxchg4.acq r11=[r33],r35,ar.ccv 2c6: 00 00 00 02 00 00 nop.m 0x0 2cc: 00 00 04 00 nop.i 0x0;; 2d0: 10 00 2c 40 90 11 [MIB] st4 [r32]=r11 2d6: 00 00 00 02 00 00 nop.i 0x0 2dc: 20 00 00 40 br.few 2f0 <cmpxchg_futex_value_locked+0xc0> 2e0: 09 40 c8 f9 ff 27 [MMI] mov r8=-14 2e6: 00 00 00 02 00 00 nop.m 0x0 2ec: 00 00 04 00 nop.i 0x0;; 2f0: 0b 88 20 1a 19 21 [MMI] adds r17=3208,r13;; 2f6: 30 01 44 20 20 00 ld4 r19=[r17] 2fc: 00 00 04 00 nop.i 0x0;; 300: 0b 90 fc 27 3f 23 [MMI] adds r18=-1,r19;; 306: 00 90 44 20 23 00 st4 [r17]=r18 30c: 00 00 04 00 nop.i 0x0;; 310: 11 00 00 00 01 00 [MIB] nop.m 0x0 316: 00 00 00 02 00 80 nop.i 0x0 31c: 08 00 84 00 br.ret.sptk.many b0;; Much better. There is a 270: 05 40 00 00 00 e1 [MLX] mov r8=r0 which was generated by C code r8 = 0. Below 2b6: 00 10 81 54 08 00 mov.m ar.ccv=r34 what means that oldval is no longer overwritten. This is Debian bug#702641 (http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=702641). The patch is applicable on Kernel 3.9-rc1, 3.2.23 and many other versions. Signed-off-by: Stephan Schreiber <info@fs-driver.org> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07PCI / ACPI: Don't query OSC support with all possible controlsYinghai Lu
commit 545d6e189a41c94c11f55045a771118eccc9d9eb upstream. Found problem on system that firmware that could handle pci aer. Firmware get error reporting after pci injecting error, before os boots. But after os boots, firmware can not get report anymore, even pci=noaer is passed. Root cause: BIOS _OSC has problem with query bit checking. It turns out that BIOS vendor is copying example code from ACPI Spec. In ACPI Spec 5.0, page 290: If (Not(And(CDW1,1))) // Query flag clear? { // Disable GPEs for features granted native control. If (And(CTRL,0x01)) // Hot plug control granted? { Store(0,HPCE) // clear the hot plug SCI enable bit Store(1,HPCS) // clear the hot plug SCI status bit } ... } When Query flag is set, And(CDW1,1) will be 1, Not(1) will return 0xfffffffe. So it will get into code path that should be for control set only. BIOS acpi code should be changed to "If (LEqual(And(CDW1,1), 0)))" Current kernel code is using _OSC query to notify firmware about support from OS and then use _OSC to set control bits. During query support, current code is using all possible controls. So will execute code that should be only for control set stage. That will have problem when pci=noaer or aer firmware_first is used. As firmware have that control set for os aer already in query support stage, but later will not os aer handling. We should avoid passing all possible controls, just use osc_control_set instead. That should workaround BIOS bugs with affected systems on the field as more bios vendors are copying sample code from ACPI spec. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07Fix initialization of CMCI/CMCP interruptsTony Luck
commit d303e9e98fce56cdb3c6f2ac92f626fc2bd51c77 upstream. Back 2010 during a revamp of the irq code some initializations were moved from ia64_mca_init() to ia64_mca_late_init() in commit c75f2aa13f5b268aba369b5dc566088b5194377c Cannot use register_percpu_irq() from ia64_mca_init() But this was hideously wrong. First of all these initializations are now down far too late. Specifically after all the other cpus have been brought up and initialized their own CMC vectors from smp_callin(). Also ia64_mca_late_init() may be called from any cpu so the line: ia64_mca_cmc_vector_setup(); /* Setup vector on BSP */ is generally not executed on the BSP, and so the CMC vector isn't setup at all on that processor. Make use of the arch_early_irq_init() hook to get this code executed at just the right moment: not too early, not too late. Reported-by: Fred Hartnett <fred.hartnett@hp.com> Tested-by: Fred Hartnett <fred.hartnett@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07i2c: xiic: must always write 16-bit words to TX_FIFOSteven A. Falco
commit c39e8e4354ce4daf23336de5daa28a3b01f00aa6 upstream. The TX_FIFO register is 10 bits wide. The lower 8 bits are the data to be written, while the upper two bits are flags to indicate stop/start. The driver apparently attempted to optimize write access, by only writing a byte in those cases where the stop/start bits are zero. However, we have seen cases where the lower byte is duplicated onto the upper byte by the hardware, which causes inadvertent stop/starts. This patch changes the write access to the transmit FIFO to always be 16 bits wide. Signed off by: Steven A. Falco <sfalco@harris.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07tracing: Reset ftrace_graph_filter_enabled if count is zeroNamhyung Kim
commit 9f50afccfdc15d95d7331acddcb0f7703df089ae upstream. The ftrace_graph_count can be decreased with a "!" pattern, so that the enabled flag should be updated too. Link: http://lkml.kernel.org/r/1365663698-2413-1-git-send-email-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07tracing: Check return value of tracing_init_dentry()Namhyung Kim
commit ed6f1c996bfe4b6e520cf7a74b51cd6988d84420 upstream. Check return value and bail out if it's NULL. Link: http://lkml.kernel.org/r/1365553093-10180-2-git-send-email-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07tracing: Fix off-by-one on allocating stat->pagesNamhyung Kim
commit 39e30cd1537937d3c00ef87e865324e981434e5b upstream. The first page was allocated separately, so no need to start from 0. Link: http://lkml.kernel.org/r/1364820385-32027-2-git-send-email-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07tracing: Remove most or all of stack tracer stack size from stack_max_sizeSteven Rostedt (Red Hat)
commit 4df297129f622bdc18935c856f42b9ddd18f9f28 upstream. Currently, the depth reported in the stack tracer stack_trace file does not match the stack_max_size file. This is because the stack_max_size includes the overhead of stack tracer itself while the depth does not. The first time a max is triggered, a calculation is not performed that figures out the overhead of the stack tracer and subtracts it from the stack_max_size variable. The overhead is stored and is subtracted from the reported stack size for comparing for a new max. Now the stack_max_size corresponds to the reported depth: # cat stack_max_size 4640 # cat stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 4640 32 _raw_spin_lock+0x18/0x24 1) 4608 112 ____cache_alloc+0xb7/0x22d 2) 4496 80 kmem_cache_alloc+0x63/0x12f 3) 4416 16 mempool_alloc_slab+0x15/0x17 [...] While testing against and older gcc on x86 that uses mcount instead of fentry, I found that pasing in ip + MCOUNT_INSN_SIZE let the stack trace show one more function deep which was missing before. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07tracing: Fix stack tracer with fentry useSteven Rostedt (Red Hat)
commit d4ecbfc49b4b1d4b597fb5ba9e4fa25d62f105c5 upstream. When gcc 4.6 on x86 is used, the function tracer will use the new option -mfentry which does a call to "fentry" at every function instead of "mcount". The significance of this is that fentry is called as the first operation of the function instead of the mcount usage of being called after the stack. This causes the stack tracer to show some bogus results for the size of the last function traced, as well as showing "ftrace_call" instead of the function. This is due to the stack frame not being set up by the function that is about to be traced. # cat stack_trace Depth Size Location (48 entries) ----- ---- -------- 0) 4824 216 ftrace_call+0x5/0x2f 1) 4608 112 ____cache_alloc+0xb7/0x22d 2) 4496 80 kmem_cache_alloc+0x63/0x12f The 216 size for ftrace_call includes both the ftrace_call stack (which includes the saving of registers it does), as well as the stack size of the parent. To fix this, if CC_USING_FENTRY is defined, then the stack_tracer will reserve the first item in stack_dump_trace[] array when calling save_stack_trace(), and it will fill it in with the parent ip. Then the code will look for the parent pointer on the stack and give the real size of the parent's stack pointer: # cat stack_trace Depth Size Location (14 entries) ----- ---- -------- 0) 2640 48 update_group_power+0x26/0x187 1) 2592 224 update_sd_lb_stats+0x2a5/0x4ac 2) 2368 160 find_busiest_group+0x31/0x1f1 3) 2208 256 load_balance+0xd9/0x662 I'm Cc'ing stable, although it's not urgent, as it only shows bogus size for item #0, the rest of the trace is legit. It should still be corrected in previous stable releases. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07tracing: Use stack of calling function for stack tracerSteven Rostedt (Red Hat)
commit 87889501d0adfae10e3b0f0e6f2d7536eed9ae84 upstream. Use the stack of stack_trace_call() instead of check_stack() as the test pointer for max stack size. It makes it a bit cleaner and a little more accurate. Adding stable, as a later fix depends on this patch. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07fbcon: when font is freed, clear also vc_font.dataMika Kuoppala
commit e6637d5427d2af9f3f33b95447bfc5347e5ccd85 upstream. commit ae1287865f5361fa138d4d3b1b6277908b54eac9 Author: Dave Airlie <airlied@redhat.com> Date: Thu Jan 24 16:12:41 2013 +1000 fbcon: don't lose the console font across generic->chip driver switch uses a pointer in vc->vc_font.data to load font into the new driver. However if the font is actually freed, we need to clear the data so that we don't reload font from dangling pointer. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=892340 Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07tty: fix up atime/mtime mess, take threeLinus Torvalds
commit b0b885657b6c8ef63a46bc9299b2a7715d19acde upstream. We first tried to avoid updating atime/mtime entirely (commit b0de59b5733d: "TTY: do not update atime/mtime on read/write"), and then limited it to only update it occasionally (commit 37b7f3c76595: "TTY: fix atime/mtime regression"), but it turns out that this was both insufficient and overkill. It was insufficient because we let people attach to the shared ptmx node to see activity without even reading atime/mtime, and it was overkill because the "only once a minute" means that you can't really tell an idle person from an active one with 'w'. So this tries to fix the problem properly. It marks the shared ptmx node as un-notifiable, and it lowers the "only once a minute" to a few seconds instead - still long enough that you can't time individual keystrokes, but short enough that you can tell whether somebody is active or not. Reported-by: Simon Kirby <sim@hostway.ca> Acked-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07serial_core.c: add put_device() after device_find_child()Federico Vaga
commit 5a65dcc04cda41f4122aacc37a5a348454645399 upstream. The serial core uses device_find_child() but does not drop the reference to the retrieved child after using it. This patch add the missing put_device(). What I have done to test this issue. I used a machine with an AMBA PL011 serial driver. I tested the patch on next-20120408 because the last branch [next-20120415] does not boot on this board. For test purpose, I added some pr_info() messages to print the refcount after device_find_child() (lines: 1937,2009), and after put_device() (lines: 1947, 2021). Boot the machine *without* put_device(). Then: echo reboot > /sys/power/disk echo disk > /sys/power/state [ 87.058575] uart_suspend_port:1937 refcount 4 [ 87.058582] uart_suspend_port:1947 refcount 4 [ 87.098083] uart_resume_port:2009refcount 5 [ 87.098088] uart_resume_port:2021 refcount 5 echo disk > /sys/power/state [ 103.055574] uart_suspend_port:1937 refcount 6 [ 103.055580] uart_suspend_port:1947 refcount 6 [ 103.095322] uart_resume_port:2009 refcount 7 [ 103.095327] uart_resume_port:2021 refcount 7 echo disk > /sys/power/state [ 252.459580] uart_suspend_port:1937 refcount 8 [ 252.459586] uart_suspend_port:1947 refcount 8 [ 252.499611] uart_resume_port:2009 refcount 9 [ 252.499616] uart_resume_port:2021 refcount 9 The refcount continuously increased. Boot the machine *with* this patch. Then: echo reboot > /sys/power/disk echo disk > /sys/power/state [ 159.333559] uart_suspend_port:1937 refcount 4 [ 159.333566] uart_suspend_port:1947 refcount 3 [ 159.372751] uart_resume_port:2009 refcount 4 [ 159.372755] uart_resume_port:2021 refcount 3 echo disk > /sys/power/state [ 185.713614] uart_suspend_port:1937 refcount 4 [ 185.713621] uart_suspend_port:1947 refcount 3 [ 185.752935] uart_resume_port:2009 refcount 4 [ 185.752940] uart_resume_port:2021 refcount 3 echo disk > /sys/power/state [ 207.458584] uart_suspend_port:1937 refcount 4 [ 207.458591] uart_suspend_port:1947 refcount 3 [ 207.498598] uart_resume_port:2009 refcount 4 [ 207.498605] uart_resume_port:2021 refcount 3 The refcount correctly handled. Signed-off-by: Federico Vaga <federico.vaga@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07xen/time: Fix kasprintf splat when allocating timer%d IRQ line.Konrad Rzeszutek Wilk
commit 7918c92ae9638eb8a6ec18e2b4a0de84557cccc8 upstream. When we online the CPU, we get this splat: smpboot: Booting Node 0 Processor 1 APIC 0x2 installing Xen timer for CPU 1 BUG: sleeping function called from invalid context at /home/konrad/ssd/konrad/linux/mm/slab.c:3179 in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/1 Pid: 0, comm: swapper/1 Not tainted 3.9.0-rc6upstream-00001-g3884fad #1 Call Trace: [<ffffffff810c1fea>] __might_sleep+0xda/0x100 [<ffffffff81194617>] __kmalloc_track_caller+0x1e7/0x2c0 [<ffffffff81303758>] ? kasprintf+0x38/0x40 [<ffffffff813036eb>] kvasprintf+0x5b/0x90 [<ffffffff81303758>] kasprintf+0x38/0x40 [<ffffffff81044510>] xen_setup_timer+0x30/0xb0 [<ffffffff810445af>] xen_hvm_setup_cpu_clockevents+0x1f/0x30 [<ffffffff81666d0a>] start_secondary+0x19c/0x1a8 The solution to that is use kasprintf in the CPU hotplug path that 'online's the CPU. That is, do it in in xen_hvm_cpu_notify, and remove the call to in xen_hvm_setup_cpu_clockevents. Unfortunatly the later is not a good idea as the bootup path does not use xen_hvm_cpu_notify so we would end up never allocating timer%d interrupt lines when booting. As such add the check for atomic() to continue. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07s390/memory hotplug: prevent offline of active memory incrementsHeiko Carstens
commit 94c163663fc1dcfc067a5fb3cc1446b9469975ce upstream. In case a machine supports memory hotplug all active memory increments present at IPL time have been initialized with a "usecount" of 1. This is wrong if the memory increment size is larger than the memory section size of the memory hotplug code. If that is the case the usecount must be initialized with the number of memory sections that fit into one memory increment. Otherwise it is possible to put a memory increment into standby state even if there are still active sections. Afterwards addressing exceptions might happen which cause the kernel to panic. However even worse, if a memory increment was put into standby state and afterwards into active state again, it's contents would have been zeroed, leading to memory corruption. This was only an issue for machines that support standby memory and have at least 256GB memory. This is broken since commit fdb1bb15 "[S390] sclp/memory hotplug: fix initial usecount of increments". Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07usb-storage: CY7C68300A chips do not support Cypress ATACBTormod Volden
commit 671b4b2ba9266cbcfe7210a704e9ea487dcaa988 upstream. Many cards based on CY7C68300A/B/C use the USB ID 04b4:6830 but only the B and C variants (EZ-USB AT2LP) support the ATA Command Block functionality, according to the data sheets. The A variant (EZ-USB AT2) locks up if ATACB is attempted, until a typical 30 seconds timeout runs out and a USB reset is performed. https://bugs.launchpad.net/bugs/428469 It seems that one way to spot a CY7C68300A (at least where the card manufacturer left Cypress' EEPROM default vaules, against Cypress' recommendations) is to look at the USB string descriptor indices. A http://media.digikey.com/pdf/Data%20Sheets/Cypress%20PDFs/CY7C68300A.pdf B http://www.farnell.com/datasheets/43456.pdf C http://www.cypress.com/?rID=14189 Note that a CY7C68300B/C chip appears as CY7C68300A if it is running in Backward Compatibility Mode, and if ATACB would be supported in this case there is anyway no way to tell which chip it really is. For 5 years my external USB drive has been locking up for half a minute when plugged in and ata_id is run by udev, or anytime hdparm or similar is run on it. Finally looking at the /correct/ datasheet I think I found the reason. I am aware the quirk in this patch is a bit hacky, but the hardware manufacturers haven't made it easy for us. Signed-off-by: Tormod Volden <debian.tormod@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07usbfs: Always allow ctrl requests with USB_RECIP_ENDPOINT on the ctrl epHans de Goede
commit 1361bf4b9f9ef45e628a5b89e0fd9bedfdcb7104 upstream. When usbfs receives a ctrl-request from userspace it calls check_ctrlrecip, which for a request with USB_RECIP_ENDPOINT tries to map this to an interface to see if this interface is claimed, except for ctrl-requests with a type of USB_TYPE_VENDOR. When trying to use this device: http://www.akaipro.com/eiepro redirected to a Windows vm running on qemu on top of Linux. The windows driver makes a ctrl-req with USB_TYPE_CLASS and USB_RECIP_ENDPOINT with index 0, and the mapping of the endpoint (0) to the interface fails since ep 0 is the ctrl endpoint and thus never is part of an interface. This patch fixes this ctrl-req failing by skipping the checkintf call for USB_RECIP_ENDPOINT ctrl-reqs on the ctrl endpoint. Reported-by: Dave Stikkolorum <d.r.stikkolorum@hhs.nl> Tested-by: Dave Stikkolorum <d.r.stikkolorum@hhs.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07USB: ftdi_sio: correct ST Micro Connect Lite PIDsAdrian Thomasset
commit 9f06d15f8db6946e41f73196a122b84a37938878 upstream. The current ST Micro Connect Lite uses the FT4232H hi-speed quad USB UART FTDI chip. It is also possible to drive STM reference targets populated with an on-board JTAG debugger based on the FT2232H chip with the same STMicroelectronics tools. For this reason, the ST Micro Connect Lite PIDs should be ST_STMCLT_2232_PID: 0x3746 ST_STMCLT_4232_PID: 0x3747 Signed-off-by: Adrian Thomasset <adrian.thomasset@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07USB: add ftdi_sio USB ID for GDM Boost V1.xStefani Seibold
commit 58f8b6c4fa5a13cb2ddb400e26e9e65766d71e38 upstream. This patch add a missing usb device id for the GDMBoost V1.x device The patch is against 3.9-rc5 Signed-off-by: Stefani Seibold <stefani@seibold.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07usb/misc/appledisplay: Add 24" LED Cinema displayBen Jencks
commit e7d3b6e22c871ba36d052ca99bc8ceca4d546a60 upstream. Add the Apple 24" LED Cinema display to the supported devices. Signed-off-by: Ben Jencks <ben@bjencks.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07USB: option: add a D-Link DWM-156 variantBjørn Mork
commit a2a2d6c7f93e160b52a4ad0164db1f43f743ae0f upstream. Adding support for a Mediatek based device labelled as D-Link Model: DWM-156, H/W Ver: A7 Also adding two other device IDs found in the Debian(!) packages included on the embedded device driver CD. This is a composite MBIM + serial ports + card reader device: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 14 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7d01 Rev= 3.00 S: Manufacturer=D-Link,Inc S: Product=D-Link DWM-156 C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=500us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07USB: serial: option: Added support Olivetti Olicard 145Filippo Turato
commit d19bf5cedfd7d53854a3bd699c98b467b139833b upstream. This adds PID for Olivetti Olicard 145 in option.c Signed-off-by: Filippo Turato <nnj7585@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07powerpc/spufs: Initialise inode->i_ino in spufs_new_inode()Michael Ellerman
commit 6747e83235caecd30b186d1282e4eba7679f81b7 upstream. In commit 85fe402 (fs: do not assign default i_ino in new_inode), the initialisation of i_ino was removed from new_inode() and pushed down into the callers. However spufs_new_inode() was not updated. This exhibits as no files appearing in /spu, because all our dirents have a zero inode, which readdir() seems to dislike. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-07powerpc: Add isync to copy_and_flushMichael Neuling
commit 29ce3c5073057991217916abc25628e906911757 upstream. In __after_prom_start we copy the kernel down to zero in two calls to copy_and_flush. After the first call (copy from 0 to copy_to_here:) we jump to the newly copied code soon after. Unfortunately there's no isync between the copy of this code and the jump to it. Hence it's possible that stale instructions could still be in the icache or pipeline before we branch to it. We've seen this on real machines and it's results in no console output after: calling quiesce... returning from prom_init The below adds an isync to ensure that the copy and flushing has completed before any branching to the new instructions occurs. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-01Linux 3.0.76v3.0.76Greg Kroah-Hartman
2013-05-01sparc32: support atomic64_tSam Ravnborg
commit aea1181b0bd0a09c54546399768f359d1e198e45 upstream, Needed to compile ext4 for sparc32 since commit 503f4bdcc078e7abee273a85ce322de81b18a224 There is no-one that really require atomic64_t support on sparc32. But several drivers fails to build without proper atomic64 support. And for an allyesconfig build for sparc32 this is annoying. Include the generic atomic64_t support for sparc32. This has a text footprint cost: $size vmlinux (before atomic64_t support) text data bss dec hex filename 3578860 134260 108781 3821901 3a514d vmlinux $size vmlinux (after atomic64_t support) text data bss dec hex filename 3579892 130684 108781 3819357 3a475d vmlinux text increase (3579892 - 3578860) = 1032 bytes data decreases - but I fail to explain why! I have rebuild twice to check my numbers. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-01net: drop dst before queueing fragmentsEric Dumazet
[ Upstream commit 97599dc792b45b1669c3cdb9a4b365aad0232f65 ] Commit 4a94445c9a5c (net: Use ip_route_input_noref() in input path) added a bug in IP defragmentation handling, as non refcounted dst could escape an RCU protected section. Commit 64f3b9e203bd068 (net: ip_expire() must revalidate route) fixed the case of timeouts, but not the general problem. Tom Parkin noticed crashes in UDP stack and provided a patch, but further analysis permitted us to pinpoint the root cause. Before queueing a packet into a frag list, we must drop its dst, as this dst has limited lifetime (RCU protected) When/if a packet is finally reassembled, we use the dst of the very last skb, still protected by RCU and valid, as the dst of the reassembled packet. Use same logic in IPv6, as there is no need to hold dst references. Reported-by: Tom Parkin <tparkin@katalix.com> Tested-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-01netrom: fix invalid use of sizeof in nr_recvmsg()Wei Yongjun
[ Upstream commit c802d759623acbd6e1ee9fbdabae89159a513913 ] sizeof() when applied to a pointer typed expression gives the size of the pointer, not that of the pointed data. Introduced by commit 3ce5ef(netrom: fix info leak via msg_name in nr_recvmsg) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-01tipc: fix info leaks via msg_name in recv_msg/recv_streamMathias Krause
[ Upstream commit 60085c3d009b0df252547adb336d1ccca5ce52ec ] The code in set_orig_addr() does not initialize all of the members of struct sockaddr_tipc when filling the sockaddr info -- namely the union is only partly filled. This will make recv_msg() and recv_stream() -- the only users of this function -- leak kernel stack memory as the msg_name member is a local variable in net/socket.c. Additionally to that both recv_msg() and recv_stream() fail to update the msg_namelen member to 0 while otherwise returning with 0, i.e. "success". This is the case for, e.g., non-blocking sockets. This will lead to a 128 byte kernel stack leak in net/socket.c. Fix the first issue by initializing the memory of the union with memset(0). Fix the second one by setting msg_namelen to 0 early as it will be updated later if we're going to fill the msg_name member. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-01rose: fix info leak via msg_name in rose_recvmsg()Mathias Krause
[ Upstream commit 4a184233f21645cf0b719366210ed445d1024d72 ] The code in rose_recvmsg() does not initialize all of the members of struct sockaddr_rose/full_sockaddr_rose when filling the sockaddr info. Nor does it initialize the padding bytes of the structure inserted by the compiler for alignment. This will lead to leaking uninitialized kernel stack bytes in net/socket.c. Fix the issue by initializing the memory used for sockaddr info with memset(0). Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-01netrom: fix info leak via msg_name in nr_recvmsg()Mathias Krause
[ Upstream commits 3ce5efad47b62c57a4f5c54248347085a750ce0e and c802d759623acbd6e1ee9fbdabae89159a513913 ] In case msg_name is set the sockaddr info gets filled out, as requested, but the code fails to initialize the padding bytes of struct sockaddr_ax25 inserted by the compiler for alignment. Also the sax25_ndigis member does not get assigned, leaking four more bytes. Both issues lead to the fact that the code will leak uninitialized kernel stack bytes in net/socket.c. Fix both issues by initializing the memory with memset(0). Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-01llc: Fix missing msg_namelen update in llc_ui_recvmsg()Mathias Krause
[ Upstream commit c77a4b9cffb6215a15196ec499490d116dfad181 ] For stream sockets the code misses to update the msg_namelen member to 0 and therefore makes net/socket.c leak the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. The msg_namelen update is also missing for datagram sockets in case the socket is shutting down during receive. Fix both issues by setting msg_namelen to 0 early. It will be updated later if we're going to fill the msg_name member. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-01iucv: Fix missing msg_namelen update in iucv_sock_recvmsg()Mathias Krause
[ Upstream commit a5598bd9c087dc0efc250a5221e5d0e6f584ee88 ] The current code does not fill the msg_name member in case it is set. It also does not set the msg_namelen member to 0 and therefore makes net/socket.c leak the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. Fix that by simply setting msg_namelen to 0 as obviously nobody cared about iucv_sock_recvmsg() not filling the msg_name in case it was set. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-01irda: Fix missing msg_namelen update in irda_recvmsg_dgram()Mathias Krause
[ Upstream commit 5ae94c0d2f0bed41d6718be743985d61b7f5c47d ] The current code does not fill the msg_name member in case it is set. It also does not set the msg_namelen member to 0 and therefore makes net/socket.c leak the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. Fix that by simply setting msg_namelen to 0 as obviously nobody cared about irda_recvmsg_dgram() not filling the msg_name in case it was set. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-01caif: Fix missing msg_namelen update in caif_seqpkt_recvmsg()Mathias Krause
[ Upstream commit 2d6fbfe733f35c6b355c216644e08e149c61b271 ] The current code does not fill the msg_name member in case it is set. It also does not set the msg_namelen member to 0 and therefore makes net/socket.c leak the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. Fix that by simply setting msg_namelen to 0 as obviously nobody cared about caif_seqpkt_recvmsg() not filling the msg_name in case it was set. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-01Bluetooth: RFCOMM - Fix missing msg_namelen update in rfcomm_sock_recvmsg()Mathias Krause
[ Upstream commit e11e0455c0d7d3d62276a0c55d9dfbc16779d691 ] If RFCOMM_DEFER_SETUP is set in the flags, rfcomm_sock_recvmsg() returns early with 0 without updating the possibly set msg_namelen member. This, in turn, leads to a 128 byte kernel stack leak in net/socket.c. Fix this by updating msg_namelen in this case. For all other cases it will be handled in bt_sock_stream_recvmsg(). Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-01Bluetooth: fix possible info leak in bt_sock_recvmsg()Mathias Krause
[ Upstream commit 4683f42fde3977bdb4e8a09622788cc8b5313778 ] In case the socket is already shutting down, bt_sock_recvmsg() returns with 0 without updating msg_namelen leading to net/socket.c leaking the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. Fix this by moving the msg_namelen assignment in front of the shutdown test. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-01ax25: fix info leak via msg_name in ax25_recvmsg()Mathias Krause
[ Upstream commit ef3313e84acbf349caecae942ab3ab731471f1a1 ] When msg_namelen is non-zero the sockaddr info gets filled out, as requested, but the code fails to initialize the padding bytes of struct sockaddr_ax25 inserted by the compiler for alignment. Additionally the msg_namelen value is updated to sizeof(struct full_sockaddr_ax25) but is not always filled up to this size. Both issues lead to the fact that the code will leak uninitialized kernel stack bytes in net/socket.c. Fix both issues by initializing the memory with memset(0). Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-01atm: update msg_namelen in vcc_recvmsg()Mathias Krause
[ Upstream commit 9b3e617f3df53822345a8573b6d358f6b9e5ed87 ] The current code does not fill the msg_name member in case it is set. It also does not set the msg_namelen member to 0 and therefore makes net/socket.c leak the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. Fix that by simply setting msg_namelen to 0 as obviously nobody cared about vcc_recvmsg() not filling the msg_name in case it was set. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-01net: fix incorrect credentials passingLinus Torvalds
[ Upstream commit 83f1b4ba917db5dc5a061a44b3403ddb6e783494 ] Commit 257b5358b32f ("scm: Capture the full credentials of the scm sender") changed the credentials passing code to pass in the effective uid/gid instead of the real uid/gid. Obviously this doesn't matter most of the time (since normally they are the same), but it results in differences for suid binaries when the wrong uid/gid ends up being used. This just undoes that (presumably unintentional) part of the commit. Reported-by: Andy Lutomirski <luto@amacapital.net> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge E. Hallyn <serge@hallyn.com> Cc: David S. Miller <davem@davemloft.net> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-01tcp: call tcp_replace_ts_recent() from tcp_ack()Eric Dumazet
[ Upstream commit 12fb3dd9dc3c64ba7d64cec977cca9b5fb7b1d4e ] commit bd090dfc634d (tcp: tcp_replace_ts_recent() should not be called from tcp_validate_incoming()) introduced a TS ecr bug in slow path processing. 1 A > B P. 1:10001(10000) ack 1 <nop,nop,TS val 1001 ecr 200> 2 B < A . 1:1(0) ack 1 win 257 <sack 9001:10001,TS val 300 ecr 1001> 3 A > B . 1:1001(1000) ack 1 win 227 <nop,nop,TS val 1002 ecr 200> 4 A > B . 1001:2001(1000) ack 1 win 227 <nop,nop,TS val 1002 ecr 200> (ecr 200 should be ecr 300 in packets 3 & 4) Problem is tcp_ack() can trigger send of new packets (retransmits), reflecting the prior TSval, instead of the TSval contained in the currently processed incoming packet. Fix this by calling tcp_replace_ts_recent() from tcp_ack() after the checks, but before the actions. Reported-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-01net: sctp: sctp_auth_key_put: use kzfree instead of kfreeDaniel Borkmann
[ Upstream commit 586c31f3bf04c290dc0a0de7fc91d20aa9a5ee53 ] For sensitive data like keying material, it is common practice to zero out keys before returning the memory back to the allocator. Thus, use kzfree instead of kfree. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-01esp4: fix error return code in esp_output()Wei Yongjun
[ Upstream commit 06848c10f720cbc20e3b784c0df24930b7304b93 ] Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-01tcp: incoming connections might use wrong route under synfloodDmitry Popov
[ Upstream commit d66954a066158781ccf9c13c91d0316970fe57b6 ] There is a bug in cookie_v4_check (net/ipv4/syncookies.c): flowi4_init_output(&fl4, 0, sk->sk_mark, RT_CONN_FLAGS(sk), RT_SCOPE_UNIVERSE, IPPROTO_TCP, inet_sk_flowi_flags(sk), (opt && opt->srr) ? opt->faddr : ireq->rmt_addr, ireq->loc_addr, th->source, th->dest); Here we do not respect sk->sk_bound_dev_if, therefore wrong dst_entry may be taken. This dst_entry is used by new socket (get_cookie_sock -> tcp_v4_syn_recv_sock), so its packets may take the wrong path. Signed-off-by: Dmitry Popov <dp@highloadlab.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>