summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-02-14ROSE: AX25: finding routes simplificationBernard Pidoux
With previous patch, rose_get_neigh() routine investigates the full list of neighbor nodes until it finds or not an already connected node whether it is called locally or through a level 3 transit frame. If no routes are opened through an adjacent connected node then a classical connect request is attempted. Then there is no more reason for an extra loop such as the one removed by this patch. Signed-off-by: Bernard Pidoux <f6bvp@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-14ROSE: rose AX25 packet routing improvementBernard Pidoux
FPAC AX25 packet application is using Linux kernel ROSE routing skills in order to connect or send packets to remote stations knowing their ROSE address via a network of interconnected nodes. Each FPAC node has a ROSE routing table that Linux ROSE module is looking at each time a ROSE frame is relayed by the node or when a connect request to a neighbor node is received. A previous patch improved the system time response by looking at already established routes each time the system was looking for a route to relay a frame. If a neighbor node routing the destination address was already connected, then the frame would be sent through him. If not, a connection request would be issued. The present patch extends the same routing capability to a connect request asked by a user locally connected into an FPAC node. Without this patch, a connect request was not well handled unless it was directed to an immediate connected neighbor of the local node. Implemented at a number of ROSE FPAC node stations, the present patch improved dramatically FPAC ROSE routing time response and efficiency. Signed-off-by: Bernard Pidoux <f6bvp@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-14ipv4: fix rcu lock imbalance in fib_select_default()Eric Dumazet
Commit 0c838ff1ade7 (ipv4: Consolidate all default route selection implementations.) forgot to remove one rcu_read_unlock() from fib_select_default(). Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13can: c_can: Added support for Bosch C_CAN controllerBhupesh Sharma
Bosch C_CAN controller is a full-CAN implementation which is compliant to CAN protocol version 2.0 part A and B. Bosch C_CAN user manual can be obtained from: http://www.semiconductors.bosch.de/media/en/pdf/ipmodules_1/c_can/users_manual_c_can.pdf This patch adds the support for this controller. The following are the design choices made while writing the controller driver: 1. Interface Register set IF1 has be used only in the current design. 2. Out of the 32 Message objects available, 16 are kept aside for RX purposes and the rest for TX purposes. 3. NAPI implementation is such that both the TX and RX paths function in polling mode. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13jme: Advance driver versionGuo-Fu Tseng
Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13jme: Don't show UDP Checksum error if HW misjudgedGuo-Fu Tseng
Some JMicron Chip treat 0 as error checksum for UDP packets. Which should be "No checksum needed". Reported-by: Adam Swift <Adam.Swift@omnitude.net> Confirmed-by: "Aries Lee" <arieslee@jmicron.com> Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13jme: Refill receive unicase MAC addr after resumeGuo-Fu Tseng
The value of the register which holds receive Unicast MAC Address sometimes get messed-up after resume. This patch refill it before enabling the hardware filter. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13jme: Safer MAC processor reset sequenceGuo-Fu Tseng
Adding control to clk_rx, and makes the control of clk_{rx|tx|tcp} with safer sequence. This sequence is provided by JMicron. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13jme: Fix hardware action of full-duplexGuo-Fu Tseng
Clear Transmit Timer/Retry setting while full-duplex. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13jme: Rename phyfifo function for easier understandGuo-Fu Tseng
Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13jme: Fix bit typo of JMC250A2 workaroundGuo-Fu Tseng
Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13jme: PHY Power control for new chipGuo-Fu Tseng
After main chip rev 5, the hardware support more power saving control registers. Some Non-Linux drivers might turn off the phy power with new interfaces, this patch makes it possible for Linux to turn it on again. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13jme: Extract main and sub chip revisionGuo-Fu Tseng
Get the main and sub chip revision for later workaround use. Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13bridge: implement [add/del]_slave opsJiri Pirko
add possibility to addif/delif via rtnetlink Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13bond: implement [add/del]_slave opsJiri Pirko
allow enslaving/releasing using netlink interface Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13rtnetlink: implement setting of master deviceJiri Pirko
This patch allows userspace to enslave/release slave devices via netlink interface using IFLA_MASTER. This introduces generic way to add/remove underling devices. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13tlan: Fix bugs introduced by the last tlan cleanup patchSakari Ailus
Fix two bugs introduced by the commit c659c38b2796578638548b77ef626d93609ec8ac ("tlan: Code cleanup: checkpatch.pl is relatively happy now.") In that change, TLAN_CSTAT_READY was considered as a bit mask containing a single bit set while it was actually had two set instead. Many thanks to Dan Carpenter for finding the mistake. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13net: make dev->master generalJiri Pirko
dev->master is now tightly connected to bonding driver. This patch makes this pointer more general and ready to be used by others. - netdev_set_master() - bond specifics moved to new function netdev_set_bond_master() - introduced netif_is_bond_slave() to check if device is a bonding slave Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13net: remove the unnecessary dance around skb_bond_should_dropJiri Pirko
No need to check (master) twice and to drive in and out the header file. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11phy: Remove unneeded depends on PHYLIBhartleys
Remove unneeded depends on PHYLIB. The config selection is already in an if PHYLIB / endif block. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11network: Allow af_packet to transmit +4 bytes for VLAN packets.Ben Greear
This allows user-space to send a '1500' MTU VLAN packet on a 1500 MTU ethernet frame. The extra 4 bytes of a VLAN header is not usually charged against the MTU when other parts of the network stack is transmitting vlans... Signed-off-by: Ben Greear <greearb@candelatech.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11Merge branch 'batman-adv/next' of git://git.open-mesh.org/ecsv/linux-mergeDavid S. Miller
2011-02-11be2net: restrict WOL to PFs only.Ajit Khaparde
WOL is not supported for Vrtual Functions. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11be2net: detect a UE even when a interface is down.Ajit Khaparde
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11be2net: gracefully handle situations when UE is detectedAjit Khaparde
Avoid accessing the hardware when UE is detected. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11be2net: fix be_suspend/resume/shutdownAjit Khaparde
> call pci msix disable in be_suspend > call pci msix enable in be_resume > stop worker thread in be_suspend > start worker thread in be_resume > stop worker thread in be_shutdown Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11be2net: pass proper hdr_size while flashing redboot.Ajit Khaparde
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11be2net: Fix broken priority setting when vlan tagging is enabled.Ajit Khaparde
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11be2net: Allow VFs to call be_cmd_reset_function.Ajit Khaparde
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11be2net: pass domain numbers for pmac_add/del functionsAjit Khaparde
be_cmd_pmac_add/del functions need to pass domain number to the firmware. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11be2net: For the VF MAC, use the OUI from current MAC addressAjit Khaparde
Currently we are always using the Emulex OUI for a VF MAC address while generating MAC for a VF. Use OUI from current MAC instead. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11be2net: Cleanup the VF interface handlesAjit Khaparde
The PF needs to cleanup all the interface handles that it created for the VFs. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11be2net: call be_vf_eth_addr_config() after register_netdevAjit Khaparde
This is to avoid the completion processing for be_vf_eth_addr_config to consume the link status notification before netdev_register. Otherwise this causes the PF miss its first link status update. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11be2net: Initialize and cleanup sriov resources only if pci_enable_sriov has ↵Ajit Khaparde
succeeded. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11be2net: Use domain id when be_cmd_if_destroy is called.Ajit Khaparde
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11be2net: endianness fix in be_cmd_set_qos().Ajit Khaparde
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11be2net: While configuring QOS for VF, pass proper domain idAjit Khaparde
While configuring QOS for VFs, the VF number should be translated to domain number correctly. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-next-2.6
2011-02-11batman-adv: Disallow originator addressing within mesh layerLinus Lüssing
For a host in the mesh network, the batman layer should be transparent. However, we had one exception, data packets within the mesh network which have the same destination as a originator are being routed to that node, although there is no host that node's bat0 interface and therefore gets dropped anyway. This commit removes this exception. Signed-off-by: Linus Lüssing <linus.luessing@ascom.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-02-11batman-adv: Remove duplicate types.h inclusionsLinus Lüssing
types.h is included by main.h, which is included at the beginning of any other c-file anyway. Therefore this commit removes those duplicate inclussions. Signed-off-by: Linus Lüssing <linus.luessing@ascom.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-02-11batman-adv: Split combined variable declarationsMarek Lindner
Multiple variable declarations in a single statements over multiple lines can be split into multiple variable declarations without changing the actual behavior. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-02-11atl1: Do not use legacy PCI power managementRafael J. Wysocki
The atl1 driver uses the legacy PCI power management, so it has to do some PCI-specific things in its ->suspend() and ->resume() callbacks, which isn't necessary and should better be done by the PCI subsystem-level power management code. Convert atl1 to the new PCI power management framework and make it let the PCI subsystem take care of all the PCI-specific aspects of device handling during system power transitions. Tested-by: Thomas Fjellstrom <thomas@fjellstrom.ca> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11atl1c: Do not call device_init_wakeup() in atl1c_probe()Rafael J. Wysocki
The atl1c driver shouldn't call device_init_wakeup() in its probe routine with the second argument equal to 1, because for PCI devices the wakeup capability setting is initialized as appropriate by the PCI subsystem. Remove the potentially harmful call. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11tg3: Avoid setting power.can_wakeup for devices that cannot wake upRafael J. Wysocki
The tg3 driver uses device_init_wakeup() in such a way that the device's power.can_wakeup flag may be set even though the PCI subsystem cleared it before, in which case the device cannot wake up the system from sleep states. Modify the driver to only change the power.can_wakeup flag if the device is not capable of generating wakeup signals. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-11ixgbe: Adding 100MB FULL support in ethtoolAtita Shirwaikar
Current driver does not show 100MB support in ethtool. Adding support for the same. Signed-off-by: Atita Shirwaikar <atita.shirwaikar@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-11ixgbe: cleanup ixgbe_init_mbx_params_pf namespace issueDon Skidmore
The function ixgbe_init_mbx_params_pf isn't used unless CONFIG_PCI_IOV is defined. This is causing namespace warnings. So I wrapped its definition in CONFIG_PCI_IOV too. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-11ixgbe: cleanup namespace complaint by removing little used functionDon Skidmore
We had a support function that just walked a few pointers to get from the ixgbe_hw struct to the netdev pointer. This was causing a namespace warning so I removed it and just reference the pointers directly. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-11ixgbe: fix namespace issue with ixgbe_dcb_txq_to_tcDon Skidmore
We didn't need the prototype and it was causing namespace complaints so I made it static. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-11ixgbe: DCB, use hardware independent routinesJohn Fastabend
This consolidates hardware specifics to ixgbe_dcb.c this simplifies code that was previously branching based on hardware type. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-02-11ixgbe: DCB, remove RESET bit it is no longer neededJohn Fastabend
This removes the RESET bit previously used to force a device reset when DCB bandwidth configurations were changed. This can now be done dynamically without a reset so the bit is no longer needed. The only remaining operations that force a device reset are DCB enable/disable and FCoE application priority changes. DCB enable/disable is a hardware requirement. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>