summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-03-28Linux 2.6.33.9v2.6.33.9Greg Kroah-Hartman
2011-03-28dcdbas: force SMI to happen when expectedStuart Hayes
commit dd65c736d1b5312c80c88a64bf521db4959eded5 upstream. The dcdbas driver can do an I/O write to cause a SMI to occur. The SMI handler looks at certain registers and memory locations, so the SMI needs to happen immediately. On some systems I/O writes are posted, though, causing the SMI to happen well after the "outb" occurred, which causes random failures. Following the "outb" with an "inb" forces the write to go through even if it is posted. Signed-off-by: Stuart Hayes <stuart_hayes@yahoo.com> Acked-by: Doug Warzecha <douglas_warzecha@dell.com> Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28fs: call security_d_instantiate in d_obtain_alias V2Josef Bacik
commit 24ff6663ccfdaf088dfa7acae489cb11ed4f43c4 upstream. While trying to track down some NFS problems with BTRFS, I kept noticing I was getting -EACCESS for no apparent reason. Eric Paris and printk() helped me figure out that it was SELinux that was giving me grief, with the following denial type=AVC msg=audit(1290013638.413:95): avc: denied { 0x800000 } for pid=1772 comm="nfsd" name="" dev=sda1 ino=256 scontext=system_u:system_r:kernel_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=file Turns out this is because in d_obtain_alias if we can't find an alias we create one and do all the normal instantiation stuff, but we don't do the security_d_instantiate. Usually we are protected from getting a hashed dentry that hasn't yet run security_d_instantiate() by the parent's i_mutex, but obviously this isn't an option there, so in order to deal with the case that a second thread comes in and finds our new dentry before we get to run security_d_instantiate(), we go ahead and call it if we find a dentry already. Eric assures me that this is ok as the code checks to see if the dentry has been initialized already so calling security_d_instantiate() against the same dentry multiple times is ok. With this patch I'm no longer getting errant -EACCESS values. Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28SUNRPC: Never reuse the socket port after an xs_close()Trond Myklebust
commit 246408dcd5dfeef2df437ccb0ef4d6ee87805f58 upstream. If we call xs_close(), we're in one of two situations: - Autoclose, which means we don't expect to resend a request - bind+connect failed, which probably means the port is in use Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28x86: Cleanup highmap after brk is concludedYinghai Lu
commit e5f15b45ddf3afa2bbbb10c7ea34fb32b6de0a0e upstream. Now cleanup_highmap actually is in two steps: one is early in head64.c and only clears above _end; a second one is in init_memory_mapping() and tries to clean from _brk_end to _end. It should check if those boundaries are PMD_SIZE aligned but currently does not. Also init_memory_mapping() is called several times for numa or memory hotplug, so we really should not handle initial kernel mappings there. This patch moves cleanup_highmap() down after _brk_end is settled so we can do everything in one step. Also we honor max_pfn_mapped in the implementation of cleanup_highmap. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> LKML-Reference: <alpine.DEB.2.00.1103171739050.3382@kaball-desktop> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28Input: xen-kbdfront - advertise either absolute or relative coordinatesOlaf Hering
commit 8c3c283e6bf463ab498d6e7823aff6c4762314b6 upstream. A virtualized display device is usually viewed with the vncviewer application, either by 'xm vnc domU' or with vncviewer localhost:port. vncviewer and the RFB protocol provides absolute coordinates to the virtual display. These coordinates are either passed through to a PV guest or converted to relative coordinates for a HVM guest. A PV guest receives these coordinates and passes them to the kernels evdev driver. There it can be picked up by applications such as the xorg-input drivers. Using absolute coordinates avoids issues such as guest mouse pointer not tracking host mouse pointer due to wrong mouse acceleration settings in the guests X display. Advertise either absolute or relative coordinates to the input system and the evdev driver, depending on what dom0 provides. The xorg-input driver prefers relative coordinates even if a devices provides both. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28USB: cdc-acm: fix potential null-pointer dereference on disconnectJohan Hovold
commit 7e7797e7f6f7bfab73fca02c65e40eaa5bb9000c upstream. Fix potential null-pointer exception on disconnect introduced by commit 11ea859d64b69a747d6b060b9ed1520eab1161fe (USB: additional power savings for cdc-acm devices that support remote wakeup). Only access acm->dev after making sure it is non-null in control urb completion handler. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28USB: cdc-acm: fix potential null-pointer dereferenceJohan Hovold
commit 15e5bee33ffc11d0e5c6f819a65e7881c5c407be upstream. Must check return value of tty_port_tty_get. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28USB: cdc-acm: fix memory corruption / panicJohan Hovold
commit 23b80550e2aa61d0ba3af98b831b9195be0db9ee upstream. Prevent read urbs from being resubmitted from tasklet after port close. The receive tasklet was not disabled on port close, which could lead to corruption of receive lists on consecutive port open. In particular, read urbs could be re-submitted before port open, added to free list in open, and then added a second time to the free list in the completion handler. cdc-acm.c: Entering acm_tty_open. cdc-acm.c: acm_control_msg: rq: 0x22 val: 0x3 len: 0x0 result: 0 cdc-acm.c: Entering acm_rx_tasklet cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da280, rcv 0xf57fbc24, buf 0xf57fbd64 cdc-acm.c: set line: 115200 0 0 8 cdc-acm.c: acm_control_msg: rq: 0x20 val: 0x0 len: 0x7 result: 7 cdc-acm.c: acm_tty_close cdc-acm.c: acm_port_down cdc-acm.c: acm_control_msg: rq: 0x22 val: 0x0 len: 0x0 result: 0 cdc-acm.c: acm_ctrl_irq - urb shutting down with status: -2 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da300, rcv 0xf57fbc10, buf 0xf57fbd50 cdc-acm.c: Entering acm_read_bulk with status -2 cdc_acm 4-1:1.1: Aborting, acm not ready cdc-acm.c: Entering acm_read_bulk with status -2 cdc_acm 4-1:1.1: Aborting, acm not ready cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da380, rcv 0xf57fbbfc, buf 0xf57fbd3c cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da400, rcv 0xf57fbbe8, buf 0xf57fbd28 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da480, rcv 0xf57fbbd4, buf 0xf57fbd14 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da900, rcv 0xf57fbbc0, buf 0xf57fbd00 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da980, rcv 0xf57fbbac, buf 0xf57fbcec cdc-acm.c: acm_rx_tasklet: sending urb 0xf50daa00, rcv 0xf57fbb98, buf 0xf57fbcd8 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50daa80, rcv 0xf57fbb84, buf 0xf57fbcc4 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dab00, rcv 0xf57fbb70, buf 0xf57fbcb0 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dab80, rcv 0xf57fbb5c, buf 0xf57fbc9c cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dac00, rcv 0xf57fbb48, buf 0xf57fbc88 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dac80, rcv 0xf57fbb34, buf 0xf57fbc74 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dad00, rcv 0xf57fbb20, buf 0xf57fbc60 cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dad80, rcv 0xf57fbb0c, buf 0xf57fbc4c cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da880, rcv 0xf57fbaf8, buf 0xf57fbc38 cdc-acm.c: Entering acm_tty_open. cdc-acm.c: acm_control_msg: rq: 0x22 val: 0x3 len: 0x0 result: 0 cdc-acm.c: Entering acm_rx_tasklet cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da280, rcv 0xf57fbc24, buf 0xf57fbd64 cdc-acm.c: Entering acm_tty_write to write 3 bytes, cdc-acm.c: Get 3 bytes... cdc-acm.c: acm_write_start susp_count: 0 cdc-acm.c: Entering acm_read_bulk with status 0 ------------[ cut here ]------------ WARNING: at /home/johan/src/linux/linux-2.6/lib/list_debug.c:57 list_del+0x10c/0x120() Hardware name: Vostro 1520 list_del corruption. next->prev should be f57fbc10, but was f57fbaf8 Modules linked in: cdc_acm Pid: 3, comm: ksoftirqd/0 Not tainted 2.6.37+ #39 Call Trace: [<c103c7e2>] warn_slowpath_common+0x72/0xa0 [<c11dd8ac>] ? list_del+0x10c/0x120 [<c11dd8ac>] ? list_del+0x10c/0x120 [<c103c8b3>] warn_slowpath_fmt+0x33/0x40 [<c11dd8ac>] list_del+0x10c/0x120 [<f8051dbf>] acm_rx_tasklet+0xef/0x3e0 [cdc_acm] [<c135465d>] ? net_rps_action_and_irq_enable+0x6d/0x80 [<c1042bb6>] tasklet_action+0xe6/0x140 [<c104342f>] __do_softirq+0xaf/0x210 [<c1043380>] ? __do_softirq+0x0/0x210 <IRQ> [<c1042c9a>] ? run_ksoftirqd+0x8a/0x1c0 [<c1042c10>] ? run_ksoftirqd+0x0/0x1c0 [<c105ac24>] ? kthread+0x74/0x80 [<c105abb0>] ? kthread+0x0/0x80 [<c100337a>] ? kernel_thread_helper+0x6/0x10 ---[ end trace efd9a11434f0082e ]--- ------------[ cut here ]------------ WARNING: at /home/johan/src/linux/linux-2.6/lib/list_debug.c:57 list_del+0x10c/0x120() Hardware name: Vostro 1520 list_del corruption. next->prev should be f57fbd50, but was f57fbdb0 Modules linked in: cdc_acm Pid: 3, comm: ksoftirqd/0 Tainted: G W 2.6.37+ #39 Call Trace: [<c103c7e2>] warn_slowpath_common+0x72/0xa0 [<c11dd8ac>] ? list_del+0x10c/0x120 [<c11dd8ac>] ? list_del+0x10c/0x120 [<c103c8b3>] warn_slowpath_fmt+0x33/0x40 [<c11dd8ac>] list_del+0x10c/0x120 [<f8051dd6>] acm_rx_tasklet+0x106/0x3e0 [cdc_acm] [<c135465d>] ? net_rps_action_and_irq_enable+0x6d/0x80 [<c1042bb6>] tasklet_action+0xe6/0x140 [<c104342f>] __do_softirq+0xaf/0x210 [<c1043380>] ? __do_softirq+0x0/0x210 <IRQ> [<c1042c9a>] ? run_ksoftirqd+0x8a/0x1c0 [<c1042c10>] ? run_ksoftirqd+0x0/0x1c0 [<c105ac24>] ? kthread+0x74/0x80 [<c105abb0>] ? kthread+0x0/0x80 [<c100337a>] ? kernel_thread_helper+0x6/0x10 ---[ end trace efd9a11434f0082f ]--- cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da300, rcv 0xf57fbc10, buf 0xf57fbd50 cdc-acm.c: disconnected from network cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da380, rcv 0xf57fbbfc, buf 0xf57fbd3c cdc-acm.c: Entering acm_rx_tasklet ------------[ cut here ]------------ WARNING: at /home/johan/src/linux/linux-2.6/lib/list_debug.c:48 list_del+0xd5/0x120() Hardware name: Vostro 1520 list_del corruption, next is LIST_POISON1 (00100100) Modules linked in: cdc_acm Pid: 3, comm: ksoftirqd/0 Tainted: G W 2.6.37+ #39 Call Trace: [<c103c7e2>] warn_slowpath_common+0x72/0xa0 [<c11dd875>] ? list_del+0xd5/0x120 [<c11dd875>] ? list_del+0xd5/0x120 [<c103c8b3>] warn_slowpath_fmt+0x33/0x40 [<c11dd875>] list_del+0xd5/0x120 [<f8051fac>] acm_rx_tasklet+0x2dc/0x3e0 [cdc_acm] [<c106dbab>] ? trace_hardirqs_on+0xb/0x10 [<c1042b30>] ? tasklet_action+0x60/0x140 [<c1042bb6>] tasklet_action+0xe6/0x140 [<c104342f>] __do_softirq+0xaf/0x210 [<c1043380>] ? __do_softirq+0x0/0x210 <IRQ> [<c1042c9a>] ? run_ksoftirqd+0x8a/0x1c0 [<c1042c10>] ? run_ksoftirqd+0x0/0x1c0 [<c105ac24>] ? kthread+0x74/0x80 [<c105abb0>] ? kthread+0x0/0x80 [<c100337a>] ? kernel_thread_helper+0x6/0x10 ---[ end trace efd9a11434f00830 ]--- BUG: unable to handle kernel paging request at 00200200 IP: [<c11dd7bd>] list_del+0x1d/0x120 *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/tty/ttyACM0/uevent Modules linked in: cdc_acm Pid: 3, comm: ksoftirqd/0 Tainted: G W 2.6.37+ #39 0T816J/Vostro 1520 EIP: 0060:[<c11dd7bd>] EFLAGS: 00010046 CPU: 0 EIP is at list_del+0x1d/0x120 EAX: f57fbd3c EBX: f57fb800 ECX: ffff8000 EDX: 00200200 ESI: f57fbe90 EDI: f57fbd3c EBP: f600bf54 ESP: f600bf3c DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process ksoftirqd/0 (pid: 3, ti=f600a000 task=f60791c0 task.ti=f6082000) Stack: c1527e84 00000030 c1527e54 00100100 f57fb800 f57fbd3c f600bf98 f8051fac f8053104 f8052b94 f600bf6c c106dbab f600bf80 00000286 f60791c0 c1042b30 f57fbda8 f57f5800 f57fbdb0 f57fbd80 f57fbe7c c1656b04 00000000 f600bfb0 Call Trace: [<f8051fac>] ? acm_rx_tasklet+0x2dc/0x3e0 [cdc_acm] [<c106dbab>] ? trace_hardirqs_on+0xb/0x10 [<c1042b30>] ? tasklet_action+0x60/0x140 [<c1042bb6>] ? tasklet_action+0xe6/0x140 [<c104342f>] ? __do_softirq+0xaf/0x210 [<c1043380>] ? __do_softirq+0x0/0x210 <IRQ> [<c1042c9a>] ? run_ksoftirqd+0x8a/0x1c0 [<c1042c10>] ? run_ksoftirqd+0x0/0x1c0 [<c105ac24>] ? kthread+0x74/0x80 [<c105abb0>] ? kthread+0x0/0x80 [<c100337a>] ? kernel_thread_helper+0x6/0x10 Code: ff 48 14 e9 57 ff ff ff 90 90 90 90 90 90 55 89 e5 83 ec 18 81 38 00 01 10 00 0f 84 9c 00 00 00 8b 50 04 81 fa 00 02 20 00 74 33 <8b> 12 39 d0 75 5c 8b 10 8b 4a 04 39 c8 0f 85 b5 00 00 00 8b 48 EIP: [<c11dd7bd>] list_del+0x1d/0x120 SS:ESP 0068:f600bf3c CR2: 0000000000200200 ---[ end trace efd9a11434f00831 ]--- Kernel panic - not syncing: Fatal exception in interrupt Pid: 3, comm: ksoftirqd/0 Tainted: G D W 2.6.37+ #39 Call Trace: [<c13fede1>] ? printk+0x1d/0x24 [<c13fecce>] panic+0x66/0x15c [<c10067df>] oops_end+0x8f/0x90 [<c1025476>] no_context+0xc6/0x160 [<c10255a8>] __bad_area_nosemaphore+0x98/0x140 [<c103cf68>] ? release_console_sem+0x1d8/0x210 [<c1025667>] bad_area_nosemaphore+0x17/0x20 [<c1025a49>] do_page_fault+0x279/0x420 [<c1006a8f>] ? show_trace+0x1f/0x30 [<c13fede1>] ? printk+0x1d/0x24 [<c10257d0>] ? do_page_fault+0x0/0x420 [<c140333b>] error_code+0x5f/0x64 [<c103007b>] ? select_task_rq_fair+0x37b/0x6a0 [<c10257d0>] ? do_page_fault+0x0/0x420 [<c11dd7bd>] ? list_del+0x1d/0x120 [<f8051fac>] acm_rx_tasklet+0x2dc/0x3e0 [cdc_acm] [<c106dbab>] ? trace_hardirqs_on+0xb/0x10 [<c1042b30>] ? tasklet_action+0x60/0x140 [<c1042bb6>] tasklet_action+0xe6/0x140 [<c104342f>] __do_softirq+0xaf/0x210 [<c1043380>] ? __do_softirq+0x0/0x210 <IRQ> [<c1042c9a>] ? run_ksoftirqd+0x8a/0x1c0 [<c1042c10>] ? run_ksoftirqd+0x0/0x1c0 [<c105ac24>] ? kthread+0x74/0x80 [<c105abb0>] ? kthread+0x0/0x80 [<c100337a>] ? kernel_thread_helper+0x6/0x10 panic occurred, switching back to text console ------------[ cut here ]------------ Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28USB: uss720 fixup refcount positionPeter Holik
commit adaa3c6342b249548ea830fe8e02aa5b45be8688 upstream. My testprog do a lot of bitbang - after hours i got following warning and my machine lockups: WARNING: at /build/buildd/linux-2.6.38/lib/kref.c:34 After debugging uss720 driver i discovered that the completion callback was called before usb_submit_urb returns. The callback frees the request structure that is krefed on return by usb_submit_urb. Signed-off-by: Peter Holik <peter@holik.at> Acked-by: Thomas Sailer <t.sailer@alumni.ethz.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28ehci-hcd: Bug fix: don't set a QH's Halt bitAlan Stern
commit b5a3b3d985493c173925907adfebf3edab236fe7 upstream. This patch (as1453) fixes a long-standing bug in the ehci-hcd driver. There is no need to set the Halt bit in the overlay region for an unlinked or blocked QH. Contrary to what the comment says, setting the Halt bit does not cause the QH to be patched later; that decision (made in qh_refresh()) depends only on whether the QH is currently pointing to a valid qTD. Likewise, setting the Halt bit does not prevent completions from activating the QH while it is "stopped"; they are prevented by the fact that qh_completions() temporarily changes qh->qh_state to QH_STATE_COMPLETING. On the other hand, there are circumstances in which the QH will be reactivated _without_ being patched; this happens after an URB beyond the head of the queue is unlinked. Setting the Halt bit will then cause the hardware to see the QH with both the Active and Halt bits set, an invalid combination that will prevent the queue from advancing and may even crash some controllers. Apparently the only reason this hasn't been reported before is that unlinking URBs from the middle of a running queue is quite uncommon. However Test 17, recently added to the usbtest driver, does exactly this, and it confirms the presence of the bug. In short, there is no reason to set the Halt bit for an unlinked or blocked QH, and there is a very good reason not to set it. Therefore the code that sets it is removed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Andiry Xu <andiry.xu@amd.com> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28uvcvideo: Fix descriptor parsing for video output devicesLaurent Pinchart
commit 4093a5c4a3f59cba1a085bbf87b6ffdddc5a443d upstream. Commit 4057ac6ca9a77c4275b34b5925ab5c99557913b1 V4L/DVB (13505): uvcvideo: Refactor chain scan broke output terminals parsing. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28uvcvideo: Fix uvc_fixup_video_ctrl() format searchStephan Lachowsky
commit 38a66824d96de8aeeb915e6f46f0d3fe55828eb1 upstream. The scheme used to index format in uvc_fixup_video_ctrl() is not robust: format index is based on descriptor ordering, which does not necessarily match bFormatIndex ordering. Searching for first matching format will prevent uvc_fixup_video_ctrl() from using the wrong format/frame to make adjustments. Signed-off-by: Stephan Lachowsky <stephan.lachowsky@maxim-ic.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28nfsd: wrong index used in inner loopMi Jinlong
commit 5a02ab7c3c4580f94d13c683721039855b67cda6 upstream. We must not use dummy for index. After the first index, READ32(dummy) will change dummy!!!! Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com> [bfields@redhat.com: Trond points out READ_BUF alone is sufficient.] Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28nfsd41: modify the members value of nfsd4_op_flagsMi Jinlong
commit 5ece3cafbd88d4da5c734e1810c4a2e6474b57b2 upstream. The members of nfsd4_op_flags, (ALLOWED_WITHOUT_FH | ALLOWED_ON_ABSENT_FS) equals to ALLOWED_AS_FIRST_OP, maybe that's not what we want. OP_PUTROOTFH with op_flags = ALLOWED_WITHOUT_FH | ALLOWED_ON_ABSENT_FS, can't appears as the first operation with out SEQUENCE ops. This patch modify the wrong value of ALLOWED_WITHOUT_FH etc which was introduced by f9bb94c4. Reviewed-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28fbcon: Bugfix soft cursor detection in Tile BlittingHenry Nestler
commit d6244bc0ed0c52a795e6f4dcab3886daf3e74fac upstream. Use mask 0x10 for "soft cursor" detection on in function tile_cursor. (Tile Blitting Operation in framebuffer console). The old mask 0x01 for vc_cursor_type detects CUR_NONE, CUR_LOWER_THIRD and every second mode value as "software cursor". This hides the cursor for these modes (cursor.mode = 0). But, only CUR_NONE or "software cursor" should hide the cursor. See also 0x10 in functions add_softcursor, bit_cursor and cw_cursor. Signed-off-by: Henry Nestler <henry.nestler@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28proc: protect mm start_code/end_code in /proc/pid/statKees Cook
commit 5883f57ca0008ffc93e09cbb9847a1928e50c6f3 upstream. While mm->start_stack was protected from cross-uid viewing (commit f83ce3e6b02d5 ("proc: avoid information leaks to non-privileged processes")), the start_code and end_code values were not. This would allow the text location of a PIE binary to leak, defeating ASLR. Note that the value "1" is used instead of "0" for a protected value since "ps", "killall", and likely other readers of /proc/pid/stat, take start_code of "0" to mean a kernel thread and will misbehave. Thanks to Brad Spengler for pointing this out. Addresses CVE-2011-0726 Signed-off-by: Kees Cook <kees.cook@canonical.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Eugene Teo <eugeneteo@kernel.sg> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28procfs: fix /proc/<pid>/maps heap checkAaro Koskinen
commit 0db0c01b53a1a421513f91573241aabafb87802a upstream. The current code fails to print the "[heap]" marking if the heap is split into multiple mappings. Fix the check so that the marking is displayed in all possible cases: 1. vma matches exactly the heap 2. the heap vma is merged e.g. with bss 3. the heap vma is splitted e.g. due to locked pages Test cases. In all cases, the process should have mapping(s) with [heap] marking: (1) vma matches exactly the heap #include <stdio.h> #include <unistd.h> #include <sys/types.h> int main (void) { if (sbrk(4096) != (void *)-1) { printf("check /proc/%d/maps\n", (int)getpid()); while (1) sleep(1); } return 0; } # ./test1 check /proc/553/maps [1] + Stopped ./test1 # cat /proc/553/maps | head -4 00008000-00009000 r-xp 00000000 01:00 3113640 /test1 00010000-00011000 rw-p 00000000 01:00 3113640 /test1 00011000-00012000 rw-p 00000000 00:00 0 [heap] 4006f000-40070000 rw-p 00000000 00:00 0 (2) the heap vma is merged #include <stdio.h> #include <unistd.h> #include <sys/types.h> char foo[4096] = "foo"; char bar[4096]; int main (void) { if (sbrk(4096) != (void *)-1) { printf("check /proc/%d/maps\n", (int)getpid()); while (1) sleep(1); } return 0; } # ./test2 check /proc/556/maps [2] + Stopped ./test2 # cat /proc/556/maps | head -4 00008000-00009000 r-xp 00000000 01:00 3116312 /test2 00010000-00012000 rw-p 00000000 01:00 3116312 /test2 00012000-00014000 rw-p 00000000 00:00 0 [heap] 4004a000-4004b000 rw-p 00000000 00:00 0 (3) the heap vma is splitted (this fails without the patch) #include <stdio.h> #include <unistd.h> #include <sys/mman.h> #include <sys/types.h> int main (void) { if ((sbrk(4096) != (void *)-1) && !mlockall(MCL_FUTURE) && (sbrk(4096) != (void *)-1)) { printf("check /proc/%d/maps\n", (int)getpid()); while (1) sleep(1); } return 0; } # ./test3 check /proc/559/maps [1] + Stopped ./test3 # cat /proc/559/maps|head -4 00008000-00009000 r-xp 00000000 01:00 3119108 /test3 00010000-00011000 rw-p 00000000 01:00 3119108 /test3 00011000-00012000 rw-p 00000000 00:00 0 [heap] 00012000-00013000 rw-p 00000000 00:00 0 [heap] It looks like the bug has been there forever, and since it only results in some information missing from a procfile, it does not fulfil the -stable "critical issue" criteria. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28ext3: skip orphan cleanup on rocompat fsAmir Goldstein
commit ce654b37f87980d95f339080e4c3bdb2370bdf22 upstream. Orphan cleanup is currently executed even if the file system has some number of unknown ROCOMPAT features, which deletes inodes and frees blocks, which could be very bad for some RO_COMPAT features. This patch skips the orphan cleanup if it contains readonly compatible features not known by this ext3 implementation, which would prevent the fs from being mounted (or remounted) readwrite. Signed-off-by: Amir Goldstein <amir73il@users.sf.net> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28Prevent rt_sigqueueinfo and rt_tgsigqueueinfo from spoofing the signal codeJulien Tinnes
commit da48524eb20662618854bb3df2db01fc65f3070c upstream. Userland should be able to trust the pid and uid of the sender of a signal if the si_code is SI_TKILL. Unfortunately, the kernel has historically allowed sigqueueinfo() to send any si_code at all (as long as it was negative - to distinguish it from kernel-generated signals like SIGILL etc), so it could spoof a SI_TKILL with incorrect siginfo values. Happily, it looks like glibc has always set si_code to the appropriate SI_QUEUE, so there are probably no actual user code that ever uses anything but the appropriate SI_QUEUE flag. So just tighten the check for si_code (we used to allow any negative value), and add a (one-time) warning in case there are binaries out there that might depend on using other si_code values. Signed-off-by: Julien Tinnes <jln@google.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28Revert "intel_idle: PCI quirk to prevent Lenovo Ideapad s10-3 boot hang"Greg Kroah-Hartman
This reverts commit 05f7676dc3559c2b9061fda4e44c085a8d32fb05. To quote Len Brown: intel_idle was deemed a "feature", and thus not included in 2.6.33.stable, and thus 2.6.33.stable does not need this patch. so I'm removing it. Cc: Len Brown <len.brown@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28PCI: return correct value when writing to the "reset" attributeMichal Schmidt
commit 447c5dd7338638f526e9bcf7dcf69b4da5835c7d upstream. A successful write() to the "reset" sysfs attribute should return the number of bytes written, not 0. Otherwise userspace (bash) retries the write over and over again. Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28xen: set max_pfn_mapped to the last pfn mappedStefano Stabellini
commit 14988a4d350ce3b41ecad4f63c4f44c56f5ae34d upstream. Do not set max_pfn_mapped to the end of the initial memory mappings, that also contain pages that don't belong in pfn space (like the mfn list). Set max_pfn_mapped to the last real pfn mapped in the initial memory mappings that is the pfn backing _end. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> LKML-Reference: <alpine.DEB.2.00.1103171739050.3382@kaball-desktop> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28PCI hotplug: acpiphp: set current_state to D0 in register_slotStefano Stabellini
commit 47e9037ac16637cd7f12b8790ea7ce6680e42168 upstream. If a device doesn't support power management (pm_cap == 0) but it is acpi_pci_power_manageable() because there is a _PS0 method declared for it and _EJ0 is also declared for the slot then nobody is going to set current_state = PCI_D0 for this device. This is what I think it is happening: pci_enable_device | __pci_enable_device_flags /* here we do not set current_state because !pm_cap */ | do_pci_enable_device | pci_set_power_state | __pci_start_power_transition | pci_platform_power_transition /* platform_pci_power_manageable() calls acpi_pci_power_manageable that * returns true */ | platform_pci_set_power_state /* acpi_pci_set_power_state gets called and does nothing because the * acpi device has _EJ0, see the comment "If the ACPI device has _EJ0, * ignore the device" */ at this point if we refer to the commit message that introduced the comment above (10b3dcae0f275e2546e55303d64ddbb58cec7599), it is up to the hotplug driver to set the state to D0. However AFAICT the pci hotplug driver never does, in fact drivers/pci/hotplug/acpiphp_glue.c:register_slot sets the slot flags to (SLOT_ENABLED | SLOT_POWEREDON) but it does not set the pci device current state to PCI_D0. So my proposed fix is also to set current_state = PCI_D0 in register_slot. Comments are very welcome. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28shmem: let shared anonymous be nonlinear againHugh Dickins
commit bee4c36a5cf5c9f63ce1d7372aa62045fbd16d47 upstream. Up to 2.6.22, you could use remap_file_pages(2) on a tmpfs file or a shared mapping of /dev/zero or a shared anonymous mapping. In 2.6.23 we disabled it by default, but set VM_CAN_NONLINEAR to enable it on safe mappings. We made sure to set it in shmem_mmap() for tmpfs files, but missed it in shmem_zero_setup() for the others. Fix that at last. Reported-by: Kenny Simpson <theonetruekenny@yahoo.com> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28aio: wake all waiters when destroying ctxRoland Dreier
commit e91f90bb0bb10be9cc8efd09a3cf4ecffcad0db1 upstream. The test program below will hang because io_getevents() uses add_wait_queue_exclusive(), which means the wake_up() in io_destroy() only wakes up one of the threads. Fix this by using wake_up_all() in the aio code paths where we want to make sure no one gets stuck. // t.c -- compile with gcc -lpthread -laio t.c #include <libaio.h> #include <pthread.h> #include <stdio.h> #include <unistd.h> static const int nthr = 2; void *getev(void *ctx) { struct io_event ev; io_getevents(ctx, 1, 1, &ev, NULL); printf("io_getevents returned\n"); return NULL; } int main(int argc, char *argv[]) { io_context_t ctx = 0; pthread_t thread[nthr]; int i; io_setup(1024, &ctx); for (i = 0; i < nthr; ++i) pthread_create(&thread[i], NULL, getev, ctx); sleep(1); io_destroy(ctx); for (i = 0; i < nthr; ++i) pthread_join(thread[i], NULL); return 0; } Signed-off-by: Roland Dreier <roland@purestorage.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28ALSA: hda - VIA: Add missing support for VT1718S in A-A pathLydia Wang
commit ab657e0cacc39d88145871c6a3c844597c02d406 upstream. Modify mute_aa_path() function to support VT1718S codec. Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28ALSA: hda - VIA: Fix stereo mixer recording no sound issueLydia Wang
commit bff5fbf50bd498c217994bd2d41a53ac3141185a upstream. Modify function via_mux_enum_put() to fix stereo mixer recording no sound issue. Signed-off-by: Lydia Wang <lydiawang@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28hwmon: (sht15) Fix integer overflow in humidity calculationVivien Didelot
commit ccd32e735de7a941906e093f8dca924bb05c5794 upstream. An integer overflow occurs in the calculation of RHlinear when the relative humidity is greater than around 30%. The consequence is a subtle (but noticeable) error in the resulting humidity measurement. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28x86, binutils, xen: Fix another wrong size directiveAlexander van Heukelum
commit 371c394af27ab7d1e58a66bc19d9f1f3ac1f67b4 upstream. The latest binutils (2.21.0.20110302/Ubuntu) breaks the build yet another time, under CONFIG_XEN=y due to a .size directive that refers to a slightly differently named (hence, to the now very strict and unforgiving assembler, non-existent) symbol. [ mingo: This unnecessary build breakage caused by new binutils version 2.21 gets escallated back several kernel releases spanning several years of Linux history, affecting over 130,000 upstream kernel commits (!), on CONFIG_XEN=y 64-bit kernels (i.e. essentially affecting all major Linux distro kernel configs). Git annotate tells us that this slight debug symbol code mismatch bug has been introduced in 2008 in commit 3d75e1b8: 3d75e1b8 (Jeremy Fitzhardinge 2008-07-08 15:06:49 -0700 1231) ENTRY(xen_do_hypervisor_callback) # do_hypervisor_callback(struct *pt_regs) The 'bug' is just a slight assymetry in ENTRY()/END() debug-symbols sequences, with lots of assembly code between the ENTRY() and the END(): ENTRY(xen_do_hypervisor_callback) # do_hypervisor_callback(struct *pt_regs) ... END(do_hypervisor_callback) Human reviewers almost never catch such small mismatches, and binutils never even warned about it either. This new binutils version thus breaks the Xen build on all upstream kernels since v2.6.27, out of the blue. This makes a straightforward Git bisection of all 64-bit Xen-enabled kernels impossible on such binutils, for a bisection window of over hundred thousand historic commits. (!) This is a major fail on the side of binutils and binutils needs to turn this show-stopper build failure into a warning ASAP. ] Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Jan Beulich <jbeulich@novell.com> Cc: H.J. Lu <hjl.tools@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kees Cook <kees.cook@canonical.com> LKML-Reference: <1299877178-26063-1-git-send-email-heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28powerpc: rtas_flash needs to use rtas_data_bufMilton Miller
commit bd2b64a12bf55bec0d1b949e3dca3f8863409646 upstream. When trying to flash a machine via the update_flash command, Anton received the following error: Restarting system. FLASH: kernel bug...flash list header addr above 4GB The code in question has a comment that the flash list should be in the kernel data and therefore under 4GB: /* NOTE: the "first" block list is a global var with no data * blocks in the kernel data segment. We do this because * we want to ensure this block_list addr is under 4GB. */ Unfortunately the Kconfig option is marked tristate which means the variable may not be in the kernel data and could be above 4GB. Instead of relying on the data segment being below 4GB, use the static data buffer allocated by the kernel for use by rtas. Since we don't use the header struct directly anymore, convert it to a simple pointer. Reported-By: Anton Blanchard <anton@samba.org> Signed-Off-By: Milton Miller <miltonm@bga.com> Tested-By: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28powerpc/kdump: Fix race in kdump shutdownMichael Neuling
commit 60adec6226bbcf061d4c2d10944fced209d1847d upstream. When we are crashing, the crashing/primary CPU IPIs the secondaries to turn off IRQs, go into real mode and wait in kexec_wait. While this is happening, the primary tears down all the MMU maps. Unfortunately the primary doesn't check to make sure the secondaries have entered real mode before doing this. On PHYP machines, the secondaries can take a long time shutting down the IRQ controller as RTAS calls are need. These RTAS calls need to be serialised which resilts in the secondaries contending in lock_rtas() and hence taking a long time to shut down. We've hit this on large POWER7 machines, where some secondaries are still waiting in lock_rtas(), when the primary tears down the HPTEs. This patch makes sure all secondaries are in real mode before the primary tears down the MMU. It uses the new kexec_state entry in the paca. It times out if the secondaries don't reach real mode after 10sec. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28mmc: sdio: remember new card RCA when redetecting cardStefan Nilsson XK
commit 0aab3995485b8a994bf29a995a008c9ea4a28054 upstream. During redetection of a SDIO card, a request for a new card RCA was submitted to the card, but was then overwritten by the old RCA. This caused the card to be deselected instead of selected when using the incorrect RCA. This bug's been present since the "oldcard" handling was introduced in 2.6.32. Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com> Reviewed-by: Ulf Hansson <ulf.hansson@stericsson.com> Reviewed-by: Pawel Wieczorkiewicz <pawel.wieczorkiewicz@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28i2c: Fix typo in instantiating-devices documentRoman Fietze
commit 6ced9e6b3901af4ab6ac0a11231402c888286ea6 upstream. The struct i2c_board_info member holding the name is "type", not "name". Signed-off-by: Roman Fietze <roman.fietze@telemotive.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28fix per-cpu flag problem in the cpu affinity checkersThomas Gleixner
commit 9804c9eaeacfe78651052c5ddff31099f60ef78c upstream. The CHECK_IRQ_PER_CPU is wrong, it should be checking irq_to_desc(irq)->status not just irq. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-28smp_call_function_many: handle concurrent clearing of maskMilton Miller
commit 723aae25d5cdb09962901d36d526b44d4be1051c upstream. Mike Galbraith reported finding a lockup ("perma-spin bug") where the cpumask passed to smp_call_function_many was cleared by other cpu(s) while a cpu was preparing its call_data block, resulting in no cpu to clear the last ref and unlock the block. Having cpus clear their bit asynchronously could be useful on a mask of cpus that might have a translation context, or cpus that need a push to complete an rcu window. Instead of adding a BUG_ON and requiring yet another cpumask copy, just detect the race and handle it. Note: arch_send_call_function_ipi_mask must still handle an empty cpumask because the data block is globally visible before the that arch callback is made. And (obviously) there are no guarantees to which cpus are notified if the mask is changed during the call; only cpus that were online and had their mask bit set during the whole call are guaranteed to be called. Reported-by: Mike Galbraith <efault@gmx.de> Reported-by: Jan Beulich <JBeulich@novell.com> Acked-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-21Linux 2.6.33.8v2.6.33.8Greg Kroah-Hartman
2011-03-21isdn: avoid calling tty_ldisc_flush() in atomic contextTilman Schmidt
commit bc10f96757bd6ab3721510df8defa8f21c32f974 upstream. Remove the call to tty_ldisc_flush() from the RESULT_NO_CARRIER branch of isdn_tty_modem_result(), as already proposed in commit 00409bb045887ec5e7b9e351bc080c38ab6bfd33. This avoids a "sleeping function called from invalid context" BUG when the hardware driver calls the statcallb() callback with command==ISDN_STAT_DHUP in atomic context, which in turn calls isdn_tty_modem_result(RESULT_NO_CARRIER, ~), and from there, tty_ldisc_flush() which may sleep. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-21x86: Flush TLB if PGD entry is changed in i386 PAE modeShaohua Li
commit 4981d01eada5354d81c8929d5b2836829ba3df7b upstream. According to intel CPU manual, every time PGD entry is changed in i386 PAE mode, we need do a full TLB flush. Current code follows this and there is comment for this too in the code. But current code misses the multi-threaded case. A changed page table might be used by several CPUs, every such CPU should flush TLB. Usually this isn't a problem, because we prepopulate all PGD entries at process fork. But when the process does munmap and follows new mmap, this issue will be triggered. When it happens, some CPUs keep doing page faults: http://marc.info/?l=linux-kernel&m=129915020508238&w=2 Reported-by: Yasunori Goto<y-goto@jp.fujitsu.com> Tested-by: Yasunori Goto<y-goto@jp.fujitsu.com> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Shaohua Li<shaohua.li@intel.com> Cc: Mallick Asit K <asit.k.mallick@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mm <linux-mm@kvack.org> LKML-Reference: <1300246649.2337.95.camel@sli10-conroe> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-21call_function_many: add missing orderingMilton Miller
commit 45a5791920ae643eafc02e2eedef1a58e341b736 upstream. Paul McKenney's review pointed out two problems with the barriers in the 2.6.38 update to the smp call function many code. First, a barrier that would force the func and info members of data to be visible before their consumption in the interrupt handler was missing. This can be solved by adding a smp_wmb between setting the func and info members and setting setting the cpumask; this will pair with the existing and required smp_rmb ordering the cpumask read before the read of refs. This placement avoids the need a second smp_rmb in the interrupt handler which would be executed on each of the N cpus executing the call request. (I was thinking this barrier was present but was not). Second, the previous write to refs (establishing the zero that we the interrupt handler was testing from all cpus) was performed by a third party cpu. This would invoke transitivity which, as a recient or concurrent addition to memory-barriers.txt now explicitly states, would require a full smp_mb(). However, we know the cpumask will only be set by one cpu (the data owner) and any preivous iteration of the mask would have cleared by the reading cpu. By redundantly writing refs to 0 on the owning cpu before the smp_wmb, the write to refs will follow the same path as the writes that set the cpumask, which in turn allows us to keep the barrier in the interrupt handler a smp_rmb instead of promoting it to a smp_mb (which will be be executed by N cpus for each of the possible M elements on the list). I moved and expanded the comment about our (ab)use of the rcu list primitives for the concurrent walk earlier into this function. I considered moving the first two paragraphs to the queue list head and lock, but felt it would have been too disconected from the code. Cc: Paul McKinney <paulmck@linux.vnet.ibm.com> Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-21call_function_many: fix list delete vs add raceMilton Miller
commit e6cd1e07a185d5f9b0aa75e020df02d3c1c44940 upstream. Peter pointed out there was nothing preventing the list_del_rcu in smp_call_function_interrupt from running before the list_add_rcu in smp_call_function_many. Fix this by not setting refs until we have gotten the lock for the list. Take advantage of the wmb in list_add_rcu to save an explicit additional one. I tried to force this race with a udelay before the lock & list_add and by mixing all 64 online cpus with just 3 random cpus in the mask, but was unsuccessful. Still, inspection shows a valid race, and the fix is a extension of the existing protection window in the current code. Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-21ext3: Always set dx_node's fake_dirent explicitly.Eric Sandeen
commit d7433142b63d727b5a217c37b1a1468b116a9771 upstream. (crossport of 1f7bebb9e911d870fa8f997ddff838e82b5715ea by Andreas Schlick <schlick@lavabit.com>) When ext3_dx_add_entry() has to split an index node, it has to ensure that name_len of dx_node's fake_dirent is also zero, because otherwise e2fsck won't recognise it as an intermediate htree node and consider the htree to be corrupted. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-21perf, powerpc: Handle events that raise an exception without overflowingAnton Blanchard
commit 0837e3242c73566fc1c0196b4ec61779c25ffc93 upstream. Events on POWER7 can roll back if a speculative event doesn't eventually complete. Unfortunately in some rare cases they will raise a performance monitor exception. We need to catch this to ensure we reset the PMC. In all cases the PMC will be 256 or less cycles from overflow. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20110309143842.6c22845e@kryten> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-21SUNRPC: Ensure we always run the tk_callback before tk_actionTrond Myklebust
commit e020c6800c9621a77223bf2c1ff68180e41e8ebf upstream. This fixes a race in which the task->tk_callback() puts the rpc_task to sleep, setting a new callback. Under certain circumstances, the current code may end up executing the task->tk_action before it gets round to the callback. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-21scsi_dh_alua: fix deadlock in stpg_endioJoseph Gruher
commit ed0f36bc5719b25659b637f80ceea85494b84502 upstream. The use of blk_execute_rq_nowait() implies __blk_put_request() is needed in stpg_endio() rather than blk_put_request() -- blk_finish_request() is called with queue lock already held. Signed-off-by: Joseph Gruher <joseph.r.gruher@intel.com> Signed-off-by: Ilgu Hong <ilgu.hong@promise.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-21ALSA: ctxfi - Clear input settings before initializationPrzemyslaw Bruski
commit efed5f26664f93991c929d5bb343e65f900d72bc upstream. Clear input settings before initialization. Signed-off-by: Przemyslaw Bruski <pbruskispam@op.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-21ALSA: ctxfi - Fix SPDIF status retrievalPrzemyslaw Bruski
commit f164753a263bfd2daaf3e0273b179de7e099c57d upstream. SDPIF status retrieval always returned the default settings instead of the actual ones. Signed-off-by: Przemyslaw Bruski <pbruskispam@op.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-21ALSA: ctxfi - Fix incorrect SPDIF status bit maskPrzemyslaw Bruski
commit 4c1847e884efddcc3ede371f7839e5e65b25c34d upstream. SPDIF status mask creation was incorrect. Signed-off-by: Przemyslaw Bruski <pbruskispam@op.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-21PCI: sysfs: Fix failure path for addition of "vpd" attributeBen Hutchings
commit 0f12a4e29368a9476076515881d9ef4e5876c6e2 upstream. Commit 280c73d ("PCI: centralize the capabilities code in pci-sysfs.c") changed the initialisation of the "rom" and "vpd" attributes, and made the failure path for the "vpd" attribute incorrect. We must free the new attribute structure (attr), but instead we currently free dev->vpd->attr. That will normally be NULL, resulting in a memory leak, but it might be a stale pointer, resulting in a double-free. Found by inspection; compile-tested only. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-21PCI: do not create quirk I/O regions below PCIBIOS_MIN_IO for ICHJiri Slaby
commit 87e3dc3855430bd254370afc79f2ed92250f5b7c upstream. Some broken BIOSes on ICH4 chipset report an ACPI region which is in conflict with legacy IDE ports when ACPI is disabled. Even though the regions overlap, IDE ports are working correctly (we cannot find out the decoding rules on chipsets). So the only problem is the reported region itself, if we don't reserve the region in the quirk everything works as expected. This patch avoids reserving any quirk regions below PCIBIOS_MIN_IO which is 0x1000. Some regions might be (and are by a fast google query) below this border, but the only difference is that they won't be reserved anymore. They should still work though the same as before. The conflicts look like (1f.0 is bridge, 1f.1 is IDE ctrl): pci 0000:00:1f.1: address space collision: [io 0x0170-0x0177] conflicts with 0000:00:1f.0 [io 0x0100-0x017f] At 0x0100 a 128 bytes long ACPI region is reported in the quirk for ICH4. ata_piix then fails to find disks because the IDE legacy ports are zeroed: ata_piix 0000:00:1f.1: device not available (can't reserve [io 0x0000-0x0007]) References: https://bugzilla.novell.com/show_bug.cgi?id=558740 Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>