summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-01-25Linux 2.6.32.6v2.6.32.6Greg Kroah-Hartman
2010-01-25perf: Honour event state for aux stream dataPeter Zijlstra
commit 22e190851f8709c48baf00ed9ce6144cdc54d025 upstream. Anton reported that perf record kept receiving events even after calling ioctl(PERF_EVENT_IOC_DISABLE). It turns out that FORK,COMM and MMAP events didn't respect the disabled state and kept flowing in. Reported-by: Anton Blanchard <anton@samba.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: Anton Blanchard <anton@samba.org> LKML-Reference: <1263459187.4244.265.camel@laptop> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25perf events: Dont report side-band events on each cpu for per-task-per-cpu ↵Peter Zijlstra
events commit 5d27c23df09b702868d9a3bff86ec6abd22963ac upstream. Acme noticed that his FORK/MMAP numbers were inflated by about the same factor as his cpu-count. This led to the discovery of a few more sites that need to respect the event->cpu filter. Reported-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20091217121830.215333434@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25perf timechart: Use tid not pid for COMM changeArjan van de Ven
commit 8f06d7e6e1bbfb32698d6d455583ab7460c090e2 upstream. A process that changes its comm field, does this on a per kernel task struct basis. The timechart tool used, incorrectly, the pid to track this, and should have used the tid instead... Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20100116125319.34ac3edd@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25vmalloc: remove BUG_ON due to racy counting of VM_LAZY_FREEYongseok Koh
commit 88f5004430babb836cfce886d5d54c82166f8ba4 upstream. In free_unmap_area_noflush(), va->flags is marked as VM_LAZY_FREE first, and then vmap_lazy_nr is increased atomically. But, in __purge_vmap_area_lazy(), while traversing of vmap_are_list, nr is counted by checking VM_LAZY_FREE is set to va->flags. After counting the variable nr, kernel reads vmap_lazy_nr atomically and checks a BUG_ON condition whether nr is greater than vmap_lazy_nr to prevent vmap_lazy_nr from being negative. The problem is that, if interrupted right after marking VM_LAZY_FREE, increment of vmap_lazy_nr can be delayed. Consequently, BUG_ON condition can be met because nr is counted more than vmap_lazy_nr. It is highly probable when vmalloc/vfree are called frequently. This scenario have been verified by adding delay between marking VM_LAZY_FREE and increasing vmap_lazy_nr in free_unmap_area_noflush(). Even the vmap_lazy_nr is for checking high watermark, it never be the strict watermark. Although the BUG_ON condition is to prevent vmap_lazy_nr from being negative, vmap_lazy_nr is signed variable. So, it could go down to negative value temporarily. Consequently, removing the BUG_ON condition is proper. A possible BUG_ON message is like the below. kernel BUG at mm/vmalloc.c:517! invalid opcode: 0000 [#1] SMP EIP: 0060:[<c04824a4>] EFLAGS: 00010297 CPU: 3 EIP is at __purge_vmap_area_lazy+0x144/0x150 EAX: ee8a8818 EBX: c08e77d4 ECX: e7c7ae40 EDX: c08e77ec ESI: 000081fe EDI: e7c7ae60 EBP: e7c7ae64 ESP: e7c7ae3c DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Call Trace: [<c0482ad9>] free_unmap_vmap_area_noflush+0x69/0x70 [<c0482b02>] remove_vm_area+0x22/0x70 [<c0482c15>] __vunmap+0x45/0xe0 [<c04831ec>] vmalloc+0x2c/0x30 Code: 8d 59 e0 eb 04 66 90 89 cb 89 d0 e8 87 fe ff ff 8b 43 20 89 da 8d 48 e0 8d 43 20 3b 04 24 75 e7 fe 05 a8 a5 a3 c0 e9 78 ff ff ff <0f> 0b eb fe 90 8d b4 26 00 00 00 00 56 89 c6 b8 ac a5 a3 c0 31 EIP: [<c04824a4>] __purge_vmap_area_lazy+0x144/0x150 SS:ESP 0068:e7c7ae3c [ See also http://marc.info/?l=linux-kernel&m=126335856228090&w=2 ] Signed-off-by: Yongseok Koh <yongseok.koh@samsung.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25USB: fix usbstorage for 2770:915d delivers no FATRyan May
commit 10d2cdb6102669279bee2d9a00a22431b74583d5 upstream. Resolves kernel.org bug 14914. Remove entry for 2770:915d (usb digital camera with mass storage support) from unusual_devs.h. The fix triggered by the entry causes the file system on the camera to be completely inaccessible (no partition table, the device is not mountable). The patch works, but let me clarify a few things about it. All the patch does is remove the entry for this device from the drivers/usb/storage/unusual_devs.h, which is supposed to help with a problem with the device's reported size (I think). I'm pretty sure it was originally added for a reason, so I'm not sure removing it won't cause other problems to reappear. Also, I should note that this unusual_devs.h entry was present (and activating workarounds) in 2.6.29, but in that version everything works fine. Starting with 2.6.30, things no longer work. Signed-off-by: Ryan May <rmay31@gmail.com> Cc: Rohan Hart <rohan.hart17@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25x86/PCI/PAT: return EINVAL for pci mmap WC request for !pat_enabledSuresh Siddha
commit 2992e545ea006992ec9dc91c4fa996ce1e15f921 upstream. Thomas Schlichter reported: > X.org uses libpciaccess which tries to mmap with write combining enabled via > /sys/bus/pci/devices/*/resource0_wc. Currently, when PAT is not enabled, the > kernel does fall back to uncached mmap. Then libpciaccess thinks it succeeded > mapping with write combining enabled and does not set up suited MTRR entries. > ;-( Instead of silently mapping pci mmap region as UC minus in the case of !pat_enabled and wc request, we can return error. Eric Anholt mentioned that caller (like X) typically follows up with UC minus pci mmap request and if there is a free mtrr slot, caller will manage adding WC mtrr. Jesse Barnes says: > Older versions of libpciaccess will behave better if we do it that way > (iirc it only allocates an MTRR if the resource_wc file doesn't exist or > fails to get mapped). Reported-by: Thomas Schlichter <thomas.schlichter@web.de> Signed-off-by: Thomas Schlichter <thomas.schlichter@web.de> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Eric Anholt <eric@anholt.net> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25DM: Fix device mapper topology stackingMartin K. Petersen
commit b27d7f16d3c6c27345d4280a739809c1c2c4c0b5 upstream. Make DM use bdev_stack_limits() function so that partition offsets get taken into account when calculating alignment. Clarify stacking warnings. Also remove obsolete clearing of final alignment_offset and misalignment flag. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair G. Kergon <agk@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25block: bdev_stack_limits wrapperMartin K. Petersen
commit 17be8c245054b9c7786545af3ba3ca4e54cd4ad9 upstream. DM does not want to know about partition offsets. Add a partition-aware wrapper that DM can use when stacking block devices. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25drm/i915: try another possible DDC bus for the SDVO device with multiple outputsZhao Yakui
commit 7c3f0a2726fed78e0e0afe3b6fc3c1f5b298e447 upstream. There exist multiple DDC buses for the SDVO cards with multiple outputs. When we can't get the EDID by using the select DDC bus, we can try the other possible DDC bus to see whether the EDID can be obtained. https://bugs.freedesktop.org/show_bug.cgi?id=23842 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Tested-by: Sebastien Caty <sebastien.caty@mrnf.gouv.qc.ca> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25drm/i915: Read the response after issuing DDC bus switch commandZhao Yakui
commit 6a304caf0bf9c429fc261f260b86cabf5bde2cbb upstream. For some SDVO cards based on conexant chip, we can't read the EDID if we don't read the response after issuing SDVO DDC bus switch command. From the SDVO spec once when another I2C transaction is finished after completing the I2C transaction of issuing the bus switch command, it will be switched back to the SDVO internal state again. So we can't initiate a new I2C transaction to read the response after issuing the DDC bus switch command. Instead we should issue DDC bus switch command and read the response in the same I2C transaction. https://bugs.freedesktop.org/show_bug.cgi?id=23842 https://bugs.freedesktop.org/show_bug.cgi?id=24458 https://bugs.freedesktop.org/show_bug.cgi?id=24522 https://bugs.freedesktop.org/show_bug.cgi?id=24282 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Tested-by: Sebastien Caty <sebastien.caty@mrnf.gouv.qc.ca> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25SCSI: enclosure: fix oops while iterating enclosure_status arrayJames Bottomley
commit cc9b2e9f6603190c009e5d2629ce8e3f99571346 upstream. Based on patch originally by Jeff Mahoney <jeffm@suse.com> enclosure_status is expected to be a NULL terminated array of strings but isn't actually NULL terminated. When writing an invalid value to /sys/class/enclosure/.../.../status, it goes off the end of the array and Oopses. Fix by making the assumption true and adding NULL at the end. Reported-by: Artur Wojcik <artur.wojcik@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25ACPI: EC: Add wait for irq stormAlexey Starikovskiy
commit 54070101f86ca9a6e9ba243c999d144721ec3db7 upstream. Merge of poll and irq modes accelerated EC transaction, so that keyboard starts to suffer again. Add msleep(1) into transaction path for the storm to allow keyboard controller to do its job. Reference: http://bugzilla.kernel.org/show_bug.cgi?id=14747 Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com> Cc: François Valenduc <francois.valenduc@tvcablenet.be> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25ACPI: EC: Accelerate query executionAlexey Starikovskiy
commit a62e8f1978f49e52f87a711ff6711b323d4b12ff upstream. Split EC query handling into acknowledge and execution phase. This allows much smaller pending query lattency and lowers chances of EC going "wild" and losing events. Reference: http://bugzilla.kernel.org/show_bug.cgi?id=14858 Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com> Cc: François Valenduc <francois.valenduc@tvcablenet.be> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25USB: add speed values for USB 3.0 and wireless controllersGreg Kroah-Hartman
commit b132b04e193908a94d95065d0628f8fb0159cc55 upstream. These controllers say "unknown" for their speed in sysfs, which obviously isn't correct. Reported-by: Kurt Garloff <garloff@novell.com> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: David Vrabel <david.vrabel@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25USB: add missing delay during remote wakeupAlan Stern
commit 49d0f078f494b9d81e820a13dd8093a9bfb0b6b1 upstream. This patch (as1330) fixes a bug in khbud's handling of remote wakeups. When a device sends a remote-wakeup request, the parent hub (or the host controller driver, for directly attached devices) begins the resume sequence and notifies khubd when the sequence finishes. At this point the port's SUSPEND feature is automatically turned off. However the device needs an additional 10-ms resume-recovery time (TRSMRCY in the USB spec). Khubd does not wait for this delay if the SUSPEND feature is off, and as a result some devices fail to behave properly following a remote wakeup. This patch adds the missing delay to the remote-wakeup path. It also extends the resume-signalling delay used by ehci-hcd and uhci-hcd from 20 ms (the value in the spec) to 25 ms (the value we use for non-remote-wakeup resumes). The extra time appears to help some devices. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Rickard Bellini <rickard.bellini@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25USB: EHCI & UHCI: fix race between root-hub suspend and port resumeAlan Stern
commit cec3a53c7fe794237b582e8e77fc0e48465e65ee upstream. This patch (as1321) fixes a problem with EHCI and UHCI root-hub suspends: If the suspend occurs while a port is trying to resume, the resume doesn't finish and simply gets lost. When remote wakeup is enabled, this is undesirable behavior. The patch checks first to see if any port resumes are in progress, and if they are then it fails the root-hub suspend with -EBUSY. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25USB: EHCI: fix handling of unusual interrupt intervalsAlan Stern
commit 1b9a38bfa6e664ff02511314f5586d711c83cc91 upstream. This patch (as1320) fixes two problems related to interrupt-URB scheduling in ehci-hcd. URBs with an interval of 2 or 4 microframes aren't handled. For the time being, the patch reduces to interval to 1 uframe. URBs are constrained to have an interval no larger than 1024 frames by usb_submit_urb(). But some EHCI controllers allow use of a schedule as short as 256 frames; for these controllers we may have to decrease the interval to the actual schedule length. The second problem isn't very significant since few devices expose interrupt endpoints with an interval larger than 256 frames. But the first problem is critical; it will prevent the kernel from working with devices having interrupt intervals of 2 or 4 uframes. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Glynn Farrow <farrowg@sg.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25USB: Don't use GFP_KERNEL while we cannot reset a storage deviceOliver Neukum
commit acbe2febe71abb2360b008e9ab3ee5c44169f78c upstream. Memory allocations with GFP_KERNEL can cause IO to a storage device which can fail resulting in a need to reset the device. Therefore GFP_KERNEL cannot be safely used between usb_lock_device() and usb_unlock_device(). Replace by GFP_NOIO. Signed-off-by: Oliver Neukum <oliver@neukum.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25USB: fix bitmask merge errorAlan Stern
commit a91b593edd4b3e8aa91f671b763b27b8119eb49d upstream. This patch adds a mask bit which was mistakenly omitted from the as1311 patch (usb-storage: add BAD_SENSE flag). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25usb: serial: fix memory leak in generic driverJohan Hovold
commit 2591530204a76fecc843529ade56afe865dd2657 upstream. Fix a regression introduced by commit 715b1dc01fe44537e8fce9566e4bb48d6821d84b ("USB: usb_debug, usb_generic_serial: implement multi urb write"). URB transfer buffer was never freed when using multi-urb writes. Currently the only driver enabling multi-urb writes is usb_debug. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Greg KH <greg@kroah.com> Acked-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25serial: 8250_pnp: use wildcard for serial Wacom tabletsMatthew Garrett
commit 6d34855d9aa281f72c533ecb827405139d1b0fe9 upstream. Wacom claims that the WACF namespace will always be devoted to serial Wacom tablets. Remove the existing entries and add a wildcard to avoid having to update the kernel every time they add a new device. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Tested-by: Ping Cheng <pingc@wacom.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25nozomi: quick fix for the close/close bugAlan Cox
commit eeec32a731631a9bad9abb21c626b9f2840bee0d upstream. Nozomi goes wrong if you get the sequence open open close [stuff] close which turns out to occur on some ppp type setups. This is a quick patch up for the problem. It's not really fixing Nozomi which completely fails to implement tty open/close semantics and all the other needed stuff. Doing it right is a rather more invasive patch set and not one that will backport. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25ecryptfs: initialize private persistent file before dereferencing pointerErez Zadok
commit e27759d7a333d1f25d628c4f7caf845c51be51c2 upstream. Ecryptfs_open dereferences a pointer to the private lower file (the one stored in the ecryptfs inode), without checking if the pointer is NULL. Right afterward, it initializes that pointer if it is NULL. Swap order of statements to first initialize. Bug discovered by Duckjin Kang. Signed-off-by: Duckjin Kang <fromdj2k@gmail.com> Signed-off-by: Erez Zadok <ezk@cs.sunysb.edu> Cc: Dustin Kirkland <kirkland@canonical.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25ecryptfs: use after freeDan Carpenter
commit ece550f51ba175c14ec3ec047815927d7386ea1f upstream. The "full_alg_name" variable is used on a couple error paths, so we shouldn't free it until the end. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25tty: fix race in tty_fasyncGreg Kroah-Hartman
commit 703625118069f9f8960d356676662d3db5a9d116 upstream. We need to keep the lock held over the call to __f_setown() to prevent a PID race. Thanks to Al Viro for pointing out the problem, and to Travis for making us look here in the first place. Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Tavis Ormandy <taviso@google.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Julien Tinnes <jln@google.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25Staging: hv: fix smp problems in the hyperv core codeGreg Kroah-Hartman
commit 7692fd4d441afac728cb83fdd33349d5ba07406c upstream. This fixes a number of SMP problems that were in the hyperv core code. Patch originally written by K. Y. Srinivasan <ksrinivasan@novell.com> but forward ported to the latest in-kernel code and tweaked slightly by me. Novell, Inc. hereby disclaims all copyright in any derivative work copyright associated with this patch. Signed-off-by: K. Y. Srinivasan <ksrinivasan@novell.com> Cc: Hank Janssen <hjanssen@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25Staging: asus_oled: fix oops in 2.6.32.2Eugeni Dodonov
commit 20633bf0141c5e93e3396770d5eb7d200ee4068a upstream. After updating to 2.6.32 kernel, I started experiencing Oopses caused by the asus_oled module. After quick investigation, I wrapped this simple patch which fixes an Oops in by asus_oled module on 2.6.32.2 kernel, caused by incorrect usage of strict_strtoul function call within set_enabled and set_disabled functions. This can be triggered by simple running the userspace client for asus_old (e.g., 'asusoled -e' or 'asusoled -d'). Signed-off-by: Eugeni Dodonov <eugeni@mandriva.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25V4L/DVB (13900): gspca - sunplus: Fix bridge exchanges.Jean-Francois Moine
commit 07d1c69b2dcfdd1b21e36af0ff8b9506234908ee upstream. A previous code optimization inverted bridge registers and values, doing a regression in kernel 2.6.32. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-25x86, msr/cpuid: Register enough minors for the MSR and CPUID driversH. Peter Anvin
commit 0b962d473af32ec334df271b54ff4973cb2b4c73 upstream. register_chrdev() hardcodes registering 256 minors, presumably to avoid breaking old drivers. However, we need to register enough minors so that we have all possible CPUs. checkpatch warns on this patch, but the patch is correct: NR_CPUS here is a static *upper bound* on the *maximum CPU index* (not *number of CPUs!*) and that is what we want. Reported-and-tested-by: Russ Anderson <rja@sgi.com> Cc: Tejun Heo <tj@kernel.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Takashi Iwai <tiwai@suse.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: H. Peter Anvin <hpa@zytor.com> LKML-Reference: <tip-*@git.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-22Linux 2.6.32.5v2.6.32.5Greg Kroah-Hartman
2010-01-22vfs: Fix vmtruncate() regressionOGAWA Hirofumi
commit cedabed49b39b4319bccc059a63344b6232b619c upstream. If __block_prepare_write() was failed in block_write_begin(), the allocated blocks can be outside of ->i_size. But new truncate_pagecache() in vmtuncate() does nothing if new < old. It means the above usage is not working anymore. So, this patch fixes it by removing "new < old" check. It would need more cleanup/change. But, now -rc and truncate working is in progress, so, this tried to fix it minimum change. Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-22sched: Fix task priority bugPeter Zijlstra
commit 57785df5ac53c70da9fb53696130f3c551bfe1f9 upstream. 83f9ac removed a call to effective_prio() in wake_up_new_task(), which leads to tasks running at MAX_PRIO. This is caused by the idle thread being set to MAX_PRIO before forking off init. O(1) used that to make sure idle was always preempted, CFS uses check_preempt_curr_idle() for that so we can savely remove this bit of legacy code. Reported-by: Mike Galbraith <efault@gmx.de> Tested-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1259754383.4003.610.camel@laptop> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-22serial/8250_pnp: add a new Fujitsu Wacom Tablet PC devicePing
commit 3018aa4b1a46946dfd0ee73a533038f24e390539 upstream. This is a new two finger touch Fujitsu Wacom Tablet PC. Signed-off-by: Ping Cheng <pingc@wacom.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-22i2c/pca: Don't use *_interruptibleWolfram Sang
commit 22f8b2695eda496026623020811cae34590ee3d7 upstream. Unexpected signals can disturb the bus-handling and lock it up. Don't use interruptible in 'wait_event_*' and 'wake_*' as in commits dc1972d02747d2170fb1d78d114801f5ecb27506 (for cpm), 1ab082d7cbd0f34e39a5396cc6340c00bc5d66ef (for mpc), b7af349b175af45f9d87b3bf3f0a221e1831ed39 (for omap). Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-22i2c: Do not use device name after device_unregisterThadeu Lima de Souza Cascardo
commit c556752109794a5ff199b80a1673336b4df8433a upstream. dev_dbg outputs dev_name, which is released with device_unregister. This bug resulted in output like this: i2c Xy2�0: adapter [SMBus I801 adapter at 1880] unregistered The right output would be: i2c i2c-0: adapter [SMBus I801 adapter at 1880] unregistered Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-22sparc64: Fix Niagara2 perf event handling.David S. Miller
[ Upstream commit e04ed38d4e0cd32141f723560efcc8252b0241e2 ] For chips like Niagara2 that have true overflow indications in the %pcr (which we don't actually need and don't use) the interrupt signal persists until the overflow bits are cleared by an explicit %pcr write. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-22sparc64: Fix NMI programming when perf events are active.David S. Miller
[ Upstream commit 8183e2b38480672a1f61d416812ac078ce94b67b ] If perf events are active, we should not reset the %pcr to PCR_PIC_PRIV. That perf events code does the management. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-22sched: Fix cpu_clock() in NMIs, on !CONFIG_HAVE_UNSTABLE_SCHED_CLOCKDavid Miller
commit b9f8fcd55bbdb037e5332dbdb7b494f0b70861ac upstream. Relax stable-sched-clock architectures to not save/disable/restore hardirqs in cpu_clock(). The background is that I was trying to resolve a sparc64 perf issue when I discovered this problem. On sparc64 I implement pseudo NMIs by simply running the kernel at IRQ level 14 when local_irq_disable() is called, this allows performance counter events to still come in at IRQ level 15. This doesn't work if any code in an NMI handler does local_irq_save() or local_irq_disable() since the "disable" will kick us back to cpu IRQ level 14 thus letting NMIs back in and we recurse. The only path which that does that in the perf event IRQ handling path is the code supporting frequency based events. It uses cpu_clock(). cpu_clock() simply invokes sched_clock() with IRQs disabled. And that's a fundamental bug all on it's own, particularly for the HAVE_UNSTABLE_SCHED_CLOCK case. NMIs can thus get into the sched_clock() code interrupting the local IRQ disable code sections of it. Furthermore, for the not-HAVE_UNSTABLE_SCHED_CLOCK case, the IRQ disabling done by cpu_clock() is just pure overhead and completely unnecessary. So the core problem is that sched_clock() is not NMI safe, but we are invoking it from NMI contexts in the perf events code (via cpu_clock()). A less important issue is the overhead of IRQ disabling when it isn't necessary in cpu_clock(). CONFIG_HAVE_UNSTABLE_SCHED_CLOCK architectures are not affected by this patch. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <20091213.182502.215092085.davem@davemloft.net> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-22asus-laptop: add Lenovo SL hotkey supportIke Panhc
commit 14f8af311e7d3e4198cbaade84a34f86505dcb37 upstream. Lenovo SL series laptop has a very similar DSDT with Asus laptops. We can easily have the extra ACPI function support with little modification in asus-laptop.c Here is the hotkey enablement for Lenovo SL series laptop. This patch will enable the following hotkey: - Volumn Up - Volumn Down - Mute - Screen Lock (Fn+F2) - Battery Status (Fn+F3) - WLAN switch (Fn+F5) - Video output switch (Fn+F7) - Touchpad switch (Fn+F8) - Screen Magnifier (Fn+Space) The following function of Lenovo SL laptop is still need to be enabled: - Hotkey: KEY_SUSPEND (Fn+F4), KEY_SLEEP (Fn+F12), Dock Eject (Fn+F9) - Rfkill for bluetooth and wlan - LenovoCare LED - Hwmon for fan speed - Fingerprint scanner - Active Protection System Signed-off-by: Ike Panhc <ike.pan@canonical.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-22Input: pmouse - move Sentelic probe down the listTai-hwa Liang
commit 4a18b3ab6ed537b055e3fcfca64ab870b4f9acf0 upstream. Sentelic probes confuse IBM trackpoints so they stop responding to TP_READ_ID command. See: http://bugzilla.kernel.org/show_bug.cgi?id=14970 Let's move FSP detection lower so it is probed after trackpoint and others, just before we strat probing for Intellimouse Explorer. Signed-off-by: Tai-hwa Liang <avatar@sentelic.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-22megaraid_sas: remove sysfs poll_mode_io world writeable permissionsBryn M. Reeves
commit bb7d3f24c71e528989501617651b669fbed798cb upstream. /sys/bus/pci/drivers/megaraid_sas/poll_mode_io defaults to being world-writable, which seems bad (letting any user affect kernel driver behavior). This turns off group and user write permissions, so that on typical production systems only root can write to it. Signed-off-by: Bryn M. Reeves <bmr@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-22PCI/cardbus: Add a fixup hook and fix powerpcBenjamin Herrenschmidt
commit 2d1c861871d767153538a77c498752b36d4bb4b8 upstream The cardbus code creates PCI devices without ever going through the necessary fixup bits and pieces that normal PCI devices go through. There's in fact a commented out call to pcibios_fixup_bus() in there, it's commented because ... it doesn't work. I could make pcibios_fixup_bus() do the right thing on powerpc easily but I felt it cleaner instead to provide a specific hook pci_fixup_cardbus for which a weak empty implementation is provided by the PCI core. This fixes cardbus on powerbooks and probably all other PowerPC platforms which was broken completely for ever on some platforms and since 2.6.31 on others such as PowerBooks when we made the DMA ops mandatory (since those are setup by the fixups). Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-22HID: add device IDs for new model of Apple Wireless KeyboardChristian Schuerer-Waldheim
commit 23aeb61e7e1f02fb0f3b8f9e798e75537ca1731d upstream. Added device IDs for the new model of the Apple Wireless Keyboard (November 2009). Signed-off-by: Christian Schuerer-Waldheim <csw@xray.at> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-22reiserfs: truncate blocks not used by a writeJan Kara
commit ec8e2f7466ca370f5e09000ca40a71759afc9ac8 upstream. It can happen that write does not use all the blocks allocated in write_begin either because of some filesystem error (like ENOSPC) or because page with data to write has been removed from memory. We truncate these blocks so that we don't have dangling blocks beyond i_size. Cc: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-22V4L/DVB (13868): gspca - sn9c20x: Fix test of unsigned.Roel Kluin
commit c60503c1db76bd46577cc7ff4fafa033b675e0e5 upstream. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-22ALSA: hda - Fix missing capture mixer for ALC861/660 codecsTakashi Iwai
commit c7a8eb103248a110cdbe0530d8c5ce987f099eee upstream. The capture-related mixer elements are missing with ALC861/ALC660 codecs when quirks are present, due to missing call of set_capture_mixer(). Reference: Novell bnc#567340 http://bugzilla.novell.com/show_bug.cgi?id=567340 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-22mfd: Correct WM835x ISINK ramp time definesMark Brown
commit 9dffe2a32b0deef52605d50527c0d240b15cabf7 upstream. The constants used to specify ISINK ramp times for WM835x had the wrong shifts so that the on times applied to the off ramp and vice versa. The masks for the bitfields are correct. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-22mfd: WM835x GPIO direction register is not lockedMark Brown
commit 8e6ba2dfa2d6c4691a83a63e211990a8bd7b788b upstream. No need to set the security key when writing to it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-22x86: SGI UV: Fix mapping of MMIO registersMike Travis
commit fcfbb2b5facd65efa7284cc315225bfe3d1856c2 upstream. This fixes the problem of the initialization code not correctly mapping the entire MMIO space on a UV system. A side effect is the map_high() interface needed to be changed to accommodate different address and size shifts. Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Mike Habeck <habeck@sgi.com> Cc: Jack Steiner <steiner@sgi.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <4B479202.7080705@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>