summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-05-02x86, PAT, PCI: Change vma prot in pci_mmap to reflect inherited protPallipadi, Venkatesh
upstream commit: 9cdec049389ce2c324fd1ec508a71528a27d4a07 While looking at the issue in the thread: http://marc.info/?l=dri-devel&m=123606627824556&w=2 noticed a bug in pci PAT code and memory type setting. PCI mmap code did not set the proper protection in vma, when it inherited protection in reserve_memtype. This bug only affects the case where there exists a WC mapping before X does an mmap with /proc or /sys pci interface. This will cause X userlevel mmap from /proc or /sysfs to fail on fork. Reported-by: Kevin Winchester <kjwinchester@gmail.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Dave Airlie <airlied@redhat.com> Cc: <stable@kernel.org> LKML-Reference: <20090323190720.GA16831@linux-os.sc.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-02Add a missing unlock_kernel() in raw_open()Dan Carpenter
upstream commit: 996ff68d8b358885c1de82a45517c607999947c7 Cc: stable@kernel.org Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-02CIFS: Fix memory overwrite when saving nativeFileSystem field during mountSteve French
upstream commit: b363b3304bcf68c4541683b2eff70b29f0446a5b CIFS can allocate a few bytes to little for the nativeFileSystem field during tree connect response processing during mount. This can result in a "Redzone overwritten" message to be logged. Signed-off-by: Sridhar Vinay <vinaysridhar@in.ibm.com> Acked-by: Shirish Pargaonkar <shirishp@us.ibm.com> CC: Stable <stable@kernel.org> Signed-off-by: Steve French <sfrench@us.ibm.com> [chrisw: minor backport to CHANGES file] Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-02b43: fix b43_plcp_get_bitrate_idx_ofdm return typeLorenzo Nava
upstream commit: a3c0b87c4f21911fb7185902dd13f0e3cd7f33f7 This patch fixes the return type of b43_plcp_get_bitrate_idx_ofdm. If the plcp contains an error, the function return value is 255 instead of -1, and the packet was not dropped. This causes a warning in __ieee80211_rx function because rate idx is out of range. Cc: stable@kernel.org Signed-off-by: Lorenzo Nava <navalorenx@gmail.com> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-02cifs: fix buffer format byte on NT Rename/hardlinkJeff Layton
upstream commit: fcc7c09d94be7b75c9ea2beb22d0fae191c6b4b9 Discovered at Connnectathon 2009... The buffer format byte and the pad are transposed in NT_RENAME calls (which are used to set hardlinks). Most servers seem to ignore this fact, but NetApp filers throw back an error due to this problem. This patch fixes it. CC: Stable <stable@kernel.org> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-02USB: gadget: fix rndis regressionDavid Brownell
upstream commit: 090b90118207e786d2990310d063fda5d52cce6e Restore some code that was wrongly dropped from the RNDIS driver, and caused interop problems observed with OpenMoko. The issue is with hardware which needs help conforming to part of the USB 2.0 spec (section 8.5.3.2); some can automagically send a ZLP in response to an unexpected IN, but not all chips will do that. We don't need to check the packet length ourselves the way earlier code did, since the UDC must already check it. But we do need to tell the UDC when it must force a short packet termination of the data stage. (Based on a patch from Aric D. Blumer <aric at sdgsystems.com>) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Chris Wright <chrisw@sous-sol.org>
2009-05-02USB: usb-storage: increase max_sectors for tape drivesAlan Stern
upstream commit: 5c16034d73da2c1b663aa25dedadbc533b3d811c This patch (as1203) increases the max_sector limit for USB tape drives. By default usb-storage sets max_sectors to 240 (i.e., 120 KB) for all devices. But tape drives need a higher limit, since tapes can and do have very large block sizes. Without the ability to transfer an entire large block in a single command, such tapes can't be used. This fixes Bugzilla #12207. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Phil Mitchell <philipm@sybase.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Chris Wright <chrisw@sous-sol.org>
2009-05-02USB: fix USB_STORAGE_CYPRESS_ATACBBoaz Harrosh
upstream commit: 1f4159c1620f74377e26d8a569d10ca5907ef475 commit 64a87b24: [SCSI] Let scsi_cmnd->cmnd use request->cmd buffer changed the scsi_eh_prep_cmnd logic by making it clear the ->cmnd buffer. But the sat to cypress atacb translation supposed the ->cmnd buffer wasn't modified. This patch makes it set the ->cmnd buffer after scsi_eh_prep_cmnd call. The problem and a fix was reported by Matthieu CASTET <castet.matthieu@free.fr> It also removes all the hackery fiddling of scsi_cmnd and scsi_eh_save by requesting from scsi_eh_prep_cmnd to prepare a read into ->sense_buffer, which is much more suitable a buffer for HW transfers, then after the command execution the regs read is copied into regs buffer before actual preparation of sense_buffer. Also fix an alien comment character to my utf-8 editor. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Cc: stable <stable@kernel.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Matthew Dharm <mdharm-kernel@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Chris Wright <chrisw@sous-sol.org>
2009-05-02USB: EHCI: add software retry for transaction errorsAlan Stern
upstream commit: a2c2706e1043c17139c2dafd171c4a5cf008ef7e This patch (as1204) adds a software retry mechanism to ehci-hcd. It gets invoked when the driver encounters transaction errors on an asynchronous endpoint. On many systems, hardware deficiencies cause such errors to occur if one device is unplugged while the host is communicating with another device. With the patch, the failed transactions are retried and generally succeed the second or third time through. This is based on code originally written by Koichiro Saito. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested by: Koichiro Saito <Saito.Koichiro@adniss.jp> CC: David Brownell <david-b@pacbell.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Chris Wright <chrisw@sous-sol.org>
2009-03-23Linux 2.6.27.21v2.6.27.21Greg Kroah-Hartman
2009-03-23USB: usbfs: keep async URBs until the device file is closedAlan Stern
commit 6ff10464096540e14d7575a72c50d0316d003714 upstream. The usbfs driver manages a list of completed asynchronous URBs. But it is too eager to free the entries on this list: destroy_async() gets called whenever an interface is unbound or a device is removed, and it deallocates the outstanding struct async entries for all URBs on that interface or device. This is wrong; the user program should be able to reap an URB any time after it has completed, regardless of whether or not the interface is still bound or the device is still present. This patch (as1222) moves the code for deallocating the completed list entries from destroy_async() to usbdev_release(). The outstanding entries won't be freed until the user program has closed the device file, thereby eliminating any possibility that the remaining URBs might still be reaped. This fixes a bug in which a program can hang in the USBDEVFS_REAPURB ioctl when the device is unplugged. Reported-and-tested-by: Martin Poupe <martin.poupe@upek.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23USB: Updated unusual-devs entry for USB mass storage on Nokia 6233Moritz Muehlenhoff
commit 716a9c8561d9c50ec454f4fbd39a265892feda2c upstream. Current firmware revision 5.60 still behaves the same, so update the quirk up a (non-existing) 99.99 revision. http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=493415 Signed-off-by: Moritz Muehlenhoff <jmm@debian.org> Tested-by: Jan Heitkoetter <devnull@heitkoetter.net> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23USB: unusual_devs: Add support for GI 0431 SD-Card interfaceJan Dumon
commit c497e715f93d148d751c055401568684eea0bf6b upstream. Enable the SD-Card interface on the GI 0431 HSUPA stick from Option. The unusual_devs.h entry is necessary because the device descriptor is vendor-specific. That prevents usb-storage from binding to it as an interface driver. T: Bus=07 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 15 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 P: Vendor=0af0 ProdID=7501 Rev= 0.00 S: Manufacturer=Option N.V. S: Product=Globetrotter HSUPA Modem C:* #Ifs=11 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 9 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=10 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Jan Dumon <j.dumon@option.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23USB: storage: Unusual USB device Prolific 2507 variation addedThomas Bartosik
commit 8a0845c51b2e300f5204a323b874f7f58ea0eff7 upstream. The "c-enter" USB to Toshiba 1.8" IDE enclosure needs special treatment to work flawlessly. This patch is absolutely trivial, as the integrated USB-IDE bridge is already identified to be an "unusual" device, only the bcdDevice is different (lower) to the bcdDeviceMin already included in the kernel. It is a Prolific 2507 bridge. T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=067b ProdID=2507 Rev= 0.01 S: Manufacturer=Prolific Technology Inc. S: Product=ATAPI-6 Bridge Controller S: SerialNumber=00000272 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Thomas Bartosik <tbartdev@gmx-topmail.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23USB: serial: new cp2101 device idRobert M. Kenney
commit c6535668798b0644e1af5934c2aec0e912280449 upstream. From: Robert M. Kenney <rmk@unh.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23USB: serial: ftdi: enable UART detection on gnICE JTAG adaptors blacklist ↵Michael Hennerich
interface0 commit b0d659002168146ec6b03d1ef062d8dcf05ff510 upstream. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23USB: serial: add FTDI USB/Serial converter devicesAxel Wachtler
commit 7f82b6dd7015aabca2fd55fb690248f742cd67f3 upstream. Add the following devices to the USB FTDI SIO device table: Bus 001 Device 009: ID 03eb:2109 Atmel Corp. http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4187 Bus 001 Device 008: ID 1cf1:0001 http://www.dresden-elektronik.de/shop/prod75.html Bus 001 Device 007: ID 1c1f:0004 http://www.dresden-elektronik.de/shop/prod64.html Signed-off-by: Axel Wachtler <axel.wachtler@atmel.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23USB: Option: let cdc-acm handle Sony Ericsson F3507g / Dell 5530Dan Williams
commit 0cc6bfe901b946df125d8e37186d8e45f876457d upstream. The generic cdc-acm driver is now the best one to handle Sony Ericsson F3507g-based devices (which the Dell 5530 is a rebrand of), now that all the pieces are in place (ie, cac477e8f1038c41b6f29d3161ce351462ef3df7). Removing the IDs from option allows cdc-acm to handle the device. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23USB: Add device id for Option GTM380 to option driverAchilleas Kotsis
commit e7f2f0d77a7b483a26054f29ba8393831b25a8a4 upstream. Option GTM380 in Modem mode uses Product ID 0x7201. This has been tested and works on production systems for over 6 months. Signed-off-by: Achilleas Kotsis <akots@exponent.gr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23USB: option.c: add ZTE 622 modem deviceAlbert Pauw
commit 9ea19b82f3126da4e47d6b94563a3c2cd586f6e2 upstream. Please consider this small patch for the usb option-card driver. This patch adds the ZTE 622 usb modem device. Signed-off-by: Albert Pauw <albert.pauw@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23USB: Add Vendor/Product ID for new CDMA U727 to option driverDirk Hohndel
commit 56a21827439a4d715b510bfaf488534e6f4ad2f8 upstream. * newer versions of the Novatel Wireless U727 CDMA 3G USB stick have a different Product ID (0x5010); adding this ID makes them work just fine with the option driver Signed-off-by: Dirk Hohndel <hohndel@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23USB: EHCI: Fix isochronous URB leakKarsten Wiese
commit 508db8c954d55ed30f870d2c24d741ba6269d13c upstream. ehci-hcd uses usb_get_urb() and usb_put_urb() in an unbalanced way causing isochronous URB's kref.counts incrementing once per usb_submit_urb() call. The culprit is *usb being set to NULL when usb_put_urb() is called after URB is given back. Due to other fixes there is no need for ehci-hcd to deal with usb_get_urb() nor usb_put_urb() anymore, so patch removes their usages in ehci-hcd. Patch also makes ehci_to_hcd(ehci)->self.bandwidth_allocated adjust, if a stream finishes. Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23USB: EHCI: expedite unlinks when the root hub is suspendedAlan Stern
commit 391016f6e2fe3b9979b4c6880a76e5e434d6947c upstream. This patch (as1225) fixes a bug in ehci-hcd. The condition for whether unlinked QHs can become IDLE should not be that the controller is halted, but rather that the controller isn't running. In other words when the root hub is suspended, the hardware doesn't own any QHs. This fixes a problem that can show up during hibernation: If a QH is only partially unlinked when the root hub is frozen, then when the root hub is thawed the QH won't be in the IDLE state. As a result it can't be used properly for new URB submissions. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Brandon Philips <brandon@ifup.org> Tested-by: Brandon Philips <brandon@ifup.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23powerpc: Remove extra semicolon in fsl_soc.cJohns Daniel
TSEC/MDIO will not work with older device trees because of a semicolon at the end of a macro resulting in an empty for loop body. This fix only applies to 2.6.28; this code is gone in 2.6.29, according to Grant Likely! Signed-off-by: Johns Daniel <johns.daniel@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23Fix misreporting of #cores as #hyperthreads for Q9550Joe Korty
Fix misreporting of #cores for the Intel Quad Core Q9550. For the Q9550, in x86_64 mode, /proc/cpuinfo mistakenly reports the #cores present as the #hyperthreads present. i386 mode was not examined but is assumed to have the same problem. A backport of the following three 2.6.29-rc1 patches fixes the problem: 066941bd4eeb159307a5d7d795100d0887c00442: [PATCH] x86: unmask CPUID levels on Intel CPUs 99fb4d349db7e7dacb2099c5cc320a9e2d31c1ef: [PATCH] x86: unmask CPUID levels on Intel CPUs, fix bdf21a49bab28f0d9613e8d8724ef9c9168b61b9: [PATCH] x86: add MSR_IA32_MISC_ENABLE bits to <asm/msr-index.h> From the first patch: "If the CPUID limit bit in MSR_IA32_MISC_ENABLE is set, clear it to make all CPUID information available. This is required for some features to work, in particular XSAVE." Originally-Developed-by: H. Peter Anvin <hpa@linux.intel.com> Backported-by: Joe Korty <joe.korty@ccur.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Joe Korty <joe.korty@ccur.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23V4L/DVB (10218): cx23885: Fix Oops for mixed install of analog and digital ↵Andy Walls
only cards commit cd8f894eacf13996d920fdd2aef1afc55156b191 upstream. Analog support for HVR-1250 has not been completed, but does exist for the HVR-1800. Since both cards use the same driver, it tries to create the analog dev for both devices, which is not possible. This causes a NULL error to show up in video_open and mpeg_open. -Mark Iterations through the cx23885_devlist must check for NULL pointers as some supported devices only have DVB support at the moment. Mark Jenks encoutered an Oops in a system with both an HVR-1250 and HVR-1800 installed. -Andy Reported-by: Mark Jenks <mjenks1968@gmail.com> Tested-by: Mark Jenks <mjenks1968@gmail.com> Signed-off-by: Mark Jenks <mjenks1968@gmail.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23thinkpad-acpi: fix module autoloading for older modelsMathieu Chouquet-Stringer
commit b36a50f92d1c4300a88f606b4d2bbdc4f442a2d7 upstream. Looking at the source, there seems to be a missing * to match my DMI string. I mean for newer IBM and Lenovo's laptops you match either one of the following: MODULE_ALIAS("dmi:bvnIBM:*:svnIBM:*:pvrThinkPad*:rvnIBM:*"); MODULE_ALIAS("dmi:bvnLENOVO:*:svnLENOVO:*:pvrThinkPad*:rvnLENOVO:*"); While for older Thinkpads, you do this (for instance): IBM_BIOS_MODULE_ALIAS("1[0,3,6,8,A-G,I,K,M-P,S,T]"); with IBM_BIOS_MODULE_ALIAS being MODULE_ALIAS("dmi:bvnIBM:bvr" __type "ET??WW") Note there's no * terminating the string. As result, udev doesn't load anything because modprobe cannot find anything matching this (my machine actually): udevtest: run: '/sbin/modprobe dmi:bvnIBM:bvr1IET71WW(2.10):bd06/16/2006:svnIBM:pn236621U:pvrNotAv Signed-off-by: Mathieu Chouquet-Stringer <mchouque@free.fr> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23S390: __div64_31 broken for CONFIG_MARCH_G5Martin Schwidefsky
commit 4fa81ed27781a12f6303b9263056635ae74e3e21 upstream. The implementation of __div64_31 for G5 machines is broken. The comments in __div64_31 are correct, only the code does not do what the comments say. The part "If the remainder has overflown subtract base and increase the quotient" is only partially realized, the base is subtracted correctly but the quotient is only increased if the dividend had the last bit set. Using the correct instruction fixes the problem. Reported-by: Frans Pop <elendil@planet.nl> Tested-by: Frans Pop <elendil@planet.nl> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23eventfd: remove fput() call from possible IRQ contextDavide Libenzi
commit 87c3a86e1c220121d0ced59d1a71e78ed9abc6dd upstream. Remove a source of fput() call from inside IRQ context. Myself, like Eric, wasn't able to reproduce an fput() call from IRQ context, but Jeff said he was able to, with the attached test program. Independently from this, the bug is conceptually there, so we might be better off fixing it. This patch adds an optimization similar to the one we already do on ->ki_filp, on ->ki_eventfd. Playing with ->f_count directly is not pretty in general, but the alternative here would be to add a brand new delayed fput() infrastructure, that I'm not sure is worth it. Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Cc: Zach Brown <zach.brown@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23dm io: respect BIO_MAX_PAGES limitMikulas Patocka
commit d659e6cc98766a1a61d6bdd283f95d149abd7719 upstream. dm-io calls bio_get_nr_vecs to get the maximum number of pages to use for a given device. It allocates one additional bio_vec to use internally but failed to respect BIO_MAX_PAGES, so fix this. This was the likely cause of: https://bugzilla.redhat.com/show_bug.cgi?id=173153 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23dm ioctl: validate name length when renamingMilan Broz
commit bc0fd67feba2e0770aad85393500ba77c6489f1c upstream. When renaming a mapped device validate the length of the new name. The rename ioctl accepted any correctly-terminated string enclosed within the data passed from userspace. The other ioctls enforce a size limit of DM_NAME_LEN. If the name is changed and becomes longer than that, the device can no longer be addressed by name. Fix it by properly checking for device name length (including terminating zero). Signed-off-by: Milan Broz <mbroz@redhat.com> Reviewed-by: Jonathan Brassow <jbrassow@redhat.com> Reviewed-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23dm crypt: fix kcryptd_async_done parameterHuang Ying
commit b2174eebd1fadb76454dad09a1dacbc17081e6b0 upstream. In the async encryption-complete function (kcryptd_async_done), the crypto_async_request passed in may be different from the one passed to crypto_ablkcipher_encrypt/decrypt. Only crypto_async_request->data is guaranteed to be same as the one passed in. The current kcryptd_async_done uses the passed-in crypto_async_request directly which may cause the AES-NI-based AES algorithm implementation to panic. This patch fixes this bug by only using crypto_async_request->data, which points to dm_crypt_request, the crypto_async_request passed in. The original data (convert_context) is gotten from dm_crypt_request. [mbroz@redhat.com: reworked] Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23ata_piix: add workaround for Samsung DB-P70Tejun Heo
commit e9c1670c2a14ef9cc20d86b24b829f3947aad34e upstream. Samsung DB-P70 somehow botched the first ICH9 SATA port. The board doesn't expose the first port but somehow SStatus reports link online while failing SRST protocol leading to repeated probe failures and thus long boot delay. Because the BIOS doesn't carry any identifying DMI information, the port can't be blacklisted safely. Fortunately, the controller does have subsystem vendor and ID set. It's unclear whether the subsystem IDs are used only for the board but it can be safely worked around by disabling SIDPR access and just using SRST works around the problem. Even when the workaround is triggered on an unaffected board the only side effect will be missing SCR access. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Joseph Jang <josephjang@gmail.com> Reported-by: Jonghyon Sohn <mrsohn@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23ALSA: pcm_oss, fix locking typoJiri Slaby
commit 91054598f794fb5d8a0b1e747ff8e2e8fc2115b3 upstream. s/mutex_lock/mutex_unlock/ on 2 fail paths in snd_pcm_oss_proc_write. Probably a typo, lock should be unlocked when leaving the function. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23ALSA: mixart, fix lock imbalanceJiri Slaby
commit 82f5d57163abed2e5ff271d03217b6f90c616eb8 upstream. There is an omitted unlock in one snd_mixart_hw_params fail path. Fix it. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23ALSA: hda - Fix DMA mask for ATI controllersTakashi Iwai
commit 09240cf429505891d6123ce14a29f58f2a60121e upstream. ATI controllers (at least some SB0600 models) appear buggy to handle 64bit DMA. As a workaround, reset GCAP bit0 and let the driver to use only 32bit DMA on these controllers. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23ALSA: Fix vunmap and free order in snd_free_sgbuf_pages()Takashi Iwai
commit 6af845e4eb36fb91b322aaf77ec1cab2220a48ad upstream. In snd_free_sgbuf_pags(), vunmap() is called after releasing the SG pages, and it causes errors on Xen as Xen manages the pages differently. Although no significant errors have been reported on the actual hardware, this order should be fixed other way round, first vunmap() then free pages. Cc: Jan Beulich <jbeulich@novell.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23NFSD: provide encode routine for OP_OPENATTRBenny Halevy
commit 84f09f46b4ee9e4e9b6381f8af31817516d2091b upstream. Although this operation is unsupported by our implementation we still need to provide an encode routine for it to merely encode its (error) status back in the compound reply. Thanks for Bill Baker at sun.com for testing with the Sun OpenSolaris' client, finding, and reporting this bug at Connectathon 2009. This bug was introduced in 2.6.27 Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23nfsd: nfsd should drop CAP_MKNOD for non-rootJ. Bruce Fields
commit 76a67ec6fb79ff3570dcb5342142c16098299911 upstream. Since creating a device node is normally an operation requiring special privilege, Igor Zhbanov points out that it is surprising (to say the least) that a client can, for example, create a device node on a filesystem exported with root_squash. So, make sure CAP_MKNOD is among the capabilities dropped when an nfsd thread handles a request from a non-root user. Reported-by: Igor Zhbanov <izh1979@gmail.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23Move cc-option to below arch-specific setupLinus Torvalds
commit d0115552cdb0b4d4146975889fee2e9355515c4b upstream. Sam Ravnborg says: "We have several architectures that plays strange games with $(CC) and $(CROSS_COMPILE). So we need to postpone any use of $(call cc-option..) until we have included the arch specific Makefile so we try with the correct $(CC) version." Requested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23Add '-fwrapv' to gcc CFLAGSLinus Torvalds
commit 68df3755e383e6fecf2354a67b08f92f18536594 upstream. This makes sure that gcc doesn't try to optimize away wrapping arithmetic, which the kernel occasionally uses for overflow testing, ie things like if (ptr + offset < ptr) which technically is undefined for non-unsigned types. See http://bugzilla.kernel.org/show_bug.cgi?id=12597 for details. Not all versions of gcc support it, so we need to make it conditional (it looks like it was introduced in gcc-3.4). Reminded-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-23Build fix for __early_pfn_to_nid() undefined link errorTony Luck
commit 334f85b647bc46ff4d27ace55aa65f44d6a2f4db upstream. ia64 only defines __early_pfn_to_nid() for SPARSEMEM && NUMA configurations, so the recent: commit: f2dbcfa738368c8a40d4a5f0b65dc9879577cb21 mm: clean up for early_pfn_to_nid() ends up with some link problems for certain configuration files. Fix arch/ia64/Kconfig to only define HAVE_ARCH_EARLY_PFN_TO_NID in the cases where we do provide this function. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-16Linux 2.6.27.20v2.6.27.20Greg Kroah-Hartman
2009-03-16hwmon: (it87) Properly decode -128 degrees C temperatureJean Delvare
commit e267d25005c861fe6afda343f044536342c9f8b4 upstream The it87 driver is reporting -128 degrees C as +128 degrees C. That's not a terribly likely temperature value but let's still get it right, especially when it simplifies the code. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-16MIPS: compat: Implement is_compat_task.Ralf Baechle
commit 4302e5d53b9166d45317e3ddf0a7a9dab3efd43b upstream. This is a build fix required after "x86-64: seccomp: fix 32/64 syscall hole" (commit 5b1017404aea6d2e552e991b3fd814d839e9cd67). MIPS doesn't have the issue that was fixed for x86-64 by that patch. This also doesn't solve the N32 issue which is that N32 seccomp processes will be treated as non-compat processes thus only have access to N64 syscalls. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-16ext4: Fix deadlock in ext4_write_begin() and ext4_da_write_begin()Jan Kara
(cherry picked from commit ebd3610b110bbb18ea6f9f2aeed1e1068c537227) Functions ext4_write_begin() and ext4_da_write_begin() call grab_cache_page_write_begin() without AOP_FLAG_NOFS. Thus it can happen that page reclaim is triggered in that function and it recurses back into the filesystem (or some other filesystem). But this can lead to various problems as a transaction is already started at that point. Add the necessary flag. http://bugzilla.kernel.org/show_bug.cgi?id=11688 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-16ext4: Add fallback for find_group_flexTheodore Ts'o
(cherry picked from commit 05bf9e839d9de4e8a094274a0a2fd07beb47eaf1) This is a workaround for find_group_flex() which badly needs to be replaced. One of its problems (besides ignoring the Orlov algorithm) is that it is a bit hyperactive about returning failure under suspicious circumstances. This can lead to spurious ENOSPC failures even when there are inodes still available. Work around this for now by retrying the search using find_group_other() if find_group_flex() returns -1. If find_group_other() succeeds when find_group_flex() has failed, log a warning message. A better block/inode allocator that will fix this problem for real has been queued up for the next merge window. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-16ext4: Fix NULL dereference in ext4_ext_migrate()'s error handlingDan Carpenter
(cherry picked from commit 090542641de833c6f756895fc2f139f046e298f9) This was found through a code checker (http://repo.or.cz/w/smatch.git/). It looks like you might be able to trigger the error by trying to migrate a readonly file system. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-16ext4: Initialize preallocation list_head's properlyAneesh Kumar K.V
(cherry picked from commit d794bf8e0936dce45104565cd48c571061f4c1e3) When creating a new ext4_prealloc_space structure, we have to initialize its list_head pointers before we add them to any prealloc lists. Otherwise, with list debug enabled, we will get list corruption warnings. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-16ext4: Fix lockdep warningAneesh Kumar K.V
(cherry picked from commit ba4439165f0f0d25b2fe065cf0c1ff8130b802eb) We should not call ext4_mb_add_n_trim while holding alloc_semp. ============================================= [ INFO: possible recursive locking detected ] 2.6.29-rc4-git1-dirty #124 --------------------------------------------- ffsb/3116 is trying to acquire lock: (&meta_group_info[i]->alloc_sem){----}, at: [<ffffffff8035a6e8>] ext4_mb_load_buddy+0xd2/0x343 but task is already holding lock: (&meta_group_info[i]->alloc_sem){----}, at: [<ffffffff8035a6e8>] ext4_mb_load_buddy+0xd2/0x343 http://bugzilla.kernel.org/show_bug.cgi?id=12672 Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>