| Age | Commit message (Collapse) | Author |
|---|
|
WPA key installation must happen as soon as possible after the 4-way handshake
or the EPOL-GTK frame cannot be decrypted and gets dropped. This patch executes
WPA key installation in ioctl context instead of deferring the task to the
association worker.
In a previous patch I had tried to reduce the WPA key installation delay by
forcing immediate execution of the association thread, but that may cause
incomplete association requests.
Signed-off-by: Javier Cardona <javier@cozybit.com>
|
|
This reverts commit 93970329291a9ff73301a96a27c4af274f096835.
The original commit contains changes to psmouse-base.c and
olpc.c that mention an upstream fix and fixing a low power
toggle bug but the commit does not point to an upstream source
or describe what the bug is. Upon searching lkml, it looks
like this commit is a merge of several patches sent upstream.
As this has not received wide-spread testing yet, I am
reverting for now and we can add the changes back in
properly as separate commits after the 8.2 release.
Signed-off-by: Deepak Saxena <dsaxena@laptop.org>
|
|
Commit abe7a66b36f344a822 (in olpc-2.6 repository) addressed the issue of slow
WPA key installation, but could break the ordering of iwconfig commands like:
iwconfig eth0 essid foobar key 235232363632 mode managed channel 11
This patch adds additional guards to ensure that the fast key installation
only applies to WPA.
Thanks to Dan Williams for pointing that out.
Note to maintainer: This patch and abe7a66b36f344a822 have been submitted as
a single patch to wireless-testing: http://marc.info/?l=linux-wireless&m=122161439327313&w=2
Signed-off-by: Javier Cardona <javier@cozybit.com>
|
|
PCI_GOANY was broken without a backported patch..
Signed-off-by: Andres Salomon <dilinger@debian.org>
|
|
Previously, one would have to specifically choose CONFIG_OLPC and
CONFIG_PCI_GOOLPC in order to enable PCI_OLPC. That doesn't really work
for distro kernels, so this patch allows one to choose CONFIG_OLPC and
CONFIG_PCI_GOANY in order to build in OLPC support in a generic kernel (as
requested by Robert Millan).
This also moves GOOLPC before GOANY in the menuconfig list.
Finally, make pci_access_init return early if we detect OLPC hardware.
There's no need to continue probing stuff, and pci_pcbios_init
specifically trashes our settings (we didn't run into that before because
PCI_GOANY wasn't supported).
Signed-off-by: Andres Salomon <dilinger@debian.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
WPA requires that the PTK is installed immediately after the 4-way handshake
in order to properly decrypt the subsequent incoming EAPOL-GTK frame. If the
PTK is not enabled by the time the EAPOL-GTK frame arrives, the frame is
dropped and the supplicant does not receive the group key.
This will happen with fast Access Points that send the EAPOL-GTK frame before
the suplicant has successfully installed and enabled the PTK. To mitigate
this situation, this patch simplifies and accelerates the SIOCSIWENCODEEXT
execution.
|
|
Signed-off-by: Andres Salomon <dilinger@debian.org>
|
|
Signed-off-by: Andres Salomon <dilinger@debian.org>
|
|
The RTC code that was tacked in there defines an arch_initcall;
meanwhile, the code also has a module_init function that conflicts w/
the RTC initcall. The RTC code should probably be separated or..
something. For now, just don't allow modular building of olpc-pm.
Signed-off-by: Andres Salomon <dilinger@debian.org>
|
|
...plus xo.config, of course.
Signed-off-by: Andres Salomon <dilinger@debian.org>
|
|
This config has the config snippets that an XO requires. Everything's
modular, as well. This can be combined w/ a generic distro config, or
to a minimalist, super-optimized config for a tiny kernel.
Signed-off-by: Andres Salomon <dilinger@debian.org>
|
|
Signed-off-by: Andres Salomon <dilinger@debian.org>
|
|
|
|
Signed-off-by: Andres Salomon <dilinger@debian.org>
|
|
We currently do not re-enable the lid events when we wake up, leading
to the following bug, as per OLPC Trac #8117:
Power button -> Suspend
Power button -> Wake up
Lid close -> No Suspend
Signed-off-by: Deepak Saxena <dsaxena@laptop.org>
|
|
driver rmmod-ed, cleanup would block on the work queue stopping, but the
work queue was in turn blocked on the current command being canceled,
which didn't happen. Fix that.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Deepak Saxena <dsaxena@laptop.org>
|
|
As per OLPC trac #7981, we need a fastpath method to enable/disable
all events via a single EC command to decrease resume latency time.
This patch adds an "all" file to /sys/power/wakeup_events that
provides this capability. Writing 1 to this file will enable
all SCI events, writing 0 will disable them all.
Signed-off-by: Deepak Saxena <dsaxena@laptop.org>
|
|
Signed-off-by: Andres Salomon <dilinger@debian.org>
|
|
This reverts commit 8efe444038a205e79b38b7ad03878824901849a8.
|
|
This reverts commit 4cbc76eadf56399cd11fb736b33c53aec9caab8c.
|
|
Spit out either "Charging" or "Charging (trickle)" depending upon
whether or not TRICKLE is set.
Signed-off-by: Andres Salomon <dilinger@debian.org>
|
|
Grab the error code from EC_BAT_ERRCODE and let the user see it (rather
than attempting to decode it as we do with PROP_HEALTH).
Signed-off-by: Andres Salomon <dilinger@debian.org>
|
|
As per richard's request, when the red LED comes on, let that state
be known as EMPTY rather than CRITICAL.
Signed-off-by: Andres Salomon <dilinger@debian.org>
|
|
requested by Richard
Signed-off-by: Andres Salomon <dilinger@debian.org>
|
|
Apparently somewhere along the line, the backlight value gets reset to
full in the DCON silicon after coming back from a DCON sleep.
This patch should remedy that.
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andres Salomon <dilinger@debian.org>
|
|
a) OHM handles this
b) we weren't resetting stuff on resume, which meant the mask was
incorrect. see #8010.
Signed-off-by: Andres Salomon <dilinger@debian.org>
|
|
I was seeing a race with irq and resync handlers that sometimes caused
commands to fail. In particularly bad cases, it would cause the
keyboard to stop working. Hopefully this fixes it.
Signed-off-by: Andres Salomon <dilinger@debian.org>
|
|
This patch from Marvell adds support for enabling WOL based on
matching packet headers to signatures provided via the an iwpriv
call. See http://dev.laptop.org/ticket/6993 for details.
Signed-off-by: Shailendra Govardhan <shailen@marvell.com>
Signed-off-by: Deepak Saxena <dsaxena@laptop.org>
|
|
This patch adds a new olpc_qemu_defconfig file to build a
kernel for use on QEMU images.
Signed-off-by: Deepak Saxena <dsaxena@laptop.org>
|
|
As per OLPC Trac #7603, this enables group scheduling in the
kernel to improve audio performance, specifically that of TamTamMini.
This is not a fix as such as it does not rootcause the issue in
the scheduler changes from 2.6.22 to 2.6.25, but it is a
working solution that allows us to improve audio quality
while we dig deeper.
Signed-off-by: Deepak Saxena <dsaxena@laptop.org>
|
|
|
|
|
|
|
|
commit 82e68f7ffec3800425f2391c8c86277606860442 upstream
snd_seq_oss_synth_make_info() incorrectly reports information
to userspace without first checking for the validity of the
device number, leading to possible information leak (CVE-2008-3272).
Reported-By: Tobias Klein <tk@trapkit.de>
Acked-and-tested-by: Takashi Iwai <tiwai@suse.de>
Cc: stable@kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit d70b67c8bc72ee23b55381bd6a884f4796692f77 upstream
Lookup can install a child dentry for a deleted directory. This keeps
the directory dentry alive, and the inode pinned in the cache and on
disk, even after all external references have gone away.
This isn't a big problem normally, since memory pressure or umount
will clear out the directory dentry and its children, releasing the
inode. But for UBIFS this causes problems because its orphan area can
overflow.
Fix this by returning ENOENT for all lookups on a S_DEAD directory
before creating a child dentry.
Thanks to Zoltan Sogor for noticing this while testing UBIFS, and
Artem for the excellent analysis of the problem and testing.
Reported-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Tested-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit 43785eaeb1cfb8aed3cf8027f298b242f88fdc45 upstream
Don't create mixer volume elements for Headphone and Speaker if they
use the same DAC as normal line-outs on AD1988. Otherwise the amp
value gets screwed up, e.g.
https://bugzilla.novell.com/show_bug.cgi?id=398255
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit 470eaf6be78424fc499a5039e5d5fe58bace2bc3 upstream
Added the missing SSID of Thinkpad Z60m for model=thinkpad with
AD1981HD.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Backport fixes for usb-audio Oops at reconnection.
9eb70e6... [ALSA] usb-audio - Fix race in reconnection
f18638d... [ALSA] Clean up snd_card_free*()
73d38b1... [ALSA] Fix the race of card instance unregistration
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit d2cd74b158d7214a556226e3312f9fb1de64d7ae upstream
On Audigy2 Platinum, the Analog/Digital mixer switch is inverted.
https://bugzilla.novell.com/show_bug.cgi?id=396204
The patch adds a simple workaround.
There might be another device requiring a similar fix, too (or fix for
audigy2 generically), but right now I fix only the known broken one.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit 6c4cc3a8ed15aacc06a5fd369639fef633cee2bc upstream
Added more fallbacks to OSS PHONEOUT mixer mapping. This corresponds
to the speaker output in general, so now "Mono" and "Speaker" are
assigned.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit e48d6d97bb6bd8c008045ea0522ea8278fdccc55 upstream
ASUS A9T laptop uses line-out pin as the real front-output while
other devices use it as the surround.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit 66d715c95a39e84cd25204a665915621457d9691 upstream
It seems VT3336 can't do msi either as with its bro 3351. Disable it.
Reported in the following SUSE bug.
https://bugzilla.novell.com/show_bug.cgi?id=300001
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit d1f114d12bb4db3147e1b1342ae31083c5a79c84 upstream
This patch (as1097) fixes a bug in the remote-wakeup handling in
ehci-hcd. The driver currently does not keep track of whether the
change-suspend feature is enabled for each port; the feature is
automatically reset the first time it is read. But recent changes to
the hub driver require that the feature be read at least twice in
order to work properly.
A bit-vector is added for storing the change-suspend feature values.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit 90d95ef617a535a8832bdcb8dee07bf591e5dd82 upstream
On some boxes the touchpad needs to be reinitialized after resume to make
it function again. This fixes bugzilla #10825.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit 76ecb4f2d7ea5c3aac8970b9529775316507c6d2 upstream
Fix the problem that thermal_get_temp returns the cached value,
which causes the temperature in generic thermal never updates.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit a39a2d7c72b358c6253a2ec28e17b023b7f6f41c upstream
My laptop thinks that it's a good idea to give -73C as the critical
CPU temperature.... which isn't the best thing since it causes a shutdown
right at bootup.
Temperatures below freezing are clearly invalid critical thresholds
so just reject these as such.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit e4cc58944c1e2ce41e3079d4eb60c95e7ce04b2b upstream
Current versions of gdb require a working implementation of
PTRACE_GETSIGINFO for proper watchpoint support. Since struct siginfo
contains pointers it must be converted when passed to a 32-bit debugger.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Commit 6844e63a9458d15b4437aa467c99128d994b0f6c
Hardware encryption doesn't work yet so lets use software
encryption for now.
Changes-licensed-under: 3-Clause-BSD
Signed-off-by: Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Cc: Jiri Benc <jbenc@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit 7efd52a407bed6a2b02015b8ebbff7beba155392 upstream
If acpi_install_notify_handler() for a bay device fails, the bay driver is
superfluous. Most likely, another driver (like libata) is already caring
about this device anyway. Furthermore,
register_hotplug_dock_device(acpi_handle) from the dock driver must not be
called twice with the same handler. This would result in an endless loop
consuming 100% of CPU. So clean up and exit.
Signed-off-by: Holger Macht <hmacht@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit ec8dab36e0738d3059980d144e34f16a26bbda7d upstream
When using the HIDP or BNEP kernel support, the user-space needs to
know if the connection has been terminated for some reasons. Wake up
the application if that happens. Otherwise kernel and user-space are
no longer on the same page and weird behaviors can happen.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
