diff options
Diffstat (limited to 'sound/soc')
| -rw-r--r-- | sound/soc/blackfin/Kconfig | 16 | ||||
| -rw-r--r-- | sound/soc/blackfin/Makefile | 3 | ||||
| -rw-r--r-- | sound/soc/blackfin/bf5xx-ad73311.c | 240 |
3 files changed, 258 insertions, 1 deletions
diff --git a/sound/soc/blackfin/Kconfig b/sound/soc/blackfin/Kconfig index f98331d099e7..dc006206f622 100644 --- a/sound/soc/blackfin/Kconfig +++ b/sound/soc/blackfin/Kconfig @@ -17,6 +17,22 @@ config SND_BF5XX_SOC_SSM2602 help Say Y if you want to add support for SoC audio on BF527-EZKIT. +config SND_BF5XX_SOC_AD73311 + tristate "SoC AD73311 Audio support for Blackfin" + depends on SND_BF5XX_I2S + select SND_BF5XX_SOC_I2S + select SND_SOC_AD73311 + help + Say Y if you want to add support for AD73311 codec on Blackfin. + +config SND_BFIN_AD73311_SE + int "PF pin for AD73311L Chip Select" + depends on SND_BF5XX_SOC_AD73311 + default 4 + help + Enter the GPIO used to control AD73311's SE pin. Acceptable + values are 0 to 7 + config SND_BF5XX_AC97 tristate "SoC AC97 Audio for the ADI BF5xx chip" depends on BLACKFIN && SND_SOC diff --git a/sound/soc/blackfin/Makefile b/sound/soc/blackfin/Makefile index 9ea8bd9e0ba3..97bb37a6359c 100644 --- a/sound/soc/blackfin/Makefile +++ b/sound/soc/blackfin/Makefile @@ -14,7 +14,8 @@ obj-$(CONFIG_SND_BF5XX_SOC_I2S) += snd-soc-bf5xx-i2s.o # Blackfin Machine Support snd-ad1980-objs := bf5xx-ad1980.o snd-ssm2602-objs := bf5xx-ssm2602.o - +snd-ad73311-objs := bf5xx-ad73311.o obj-$(CONFIG_SND_BF5XX_SOC_AD1980) += snd-ad1980.o obj-$(CONFIG_SND_BF5XX_SOC_SSM2602) += snd-ssm2602.o +obj-$(CONFIG_SND_BF5XX_SOC_AD73311) += snd-ad73311.o diff --git a/sound/soc/blackfin/bf5xx-ad73311.c b/sound/soc/blackfin/bf5xx-ad73311.c new file mode 100644 index 000000000000..622c9b909532 --- /dev/null +++ b/sound/soc/blackfin/bf5xx-ad73311.c @@ -0,0 +1,240 @@ +/* + * File: sound/soc/blackfin/bf5xx-ad73311.c + * Author: Cliff Cai <Cliff.Cai@analog.com> + * + * Created: Thur Sep 25 2008 + * Description: Board driver for ad73311 sound chip + * + * Modified: + * Copyright 2008 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/gpio.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/pcm_params.h> + +#include <asm/blackfin.h> +#include <asm/cacheflush.h> +#include <asm/irq.h> +#include <asm/dma.h> +#include <asm/portmux.h> + +#include "../codecs/ad73311.h" +#include "bf5xx-sport.h" +#include "bf5xx-i2s-pcm.h" +#include "bf5xx-i2s.h" + +#if CONFIG_SND_BF5XX_SPORT_NUM == 0 +#define bfin_write_SPORT_TCR1 bfin_write_SPORT0_TCR1 +#define bfin_read_SPORT_TCR1 bfin_read_SPORT0_TCR1 +#define bfin_write_SPORT_TCR2 bfin_write_SPORT0_TCR2 +#define bfin_write_SPORT_TX16 bfin_write_SPORT0_TX16 +#define bfin_read_SPORT_STAT bfin_read_SPORT0_STAT +#else +#define bfin_write_SPORT_TCR1 bfin_write_SPORT1_TCR1 +#define bfin_read_SPORT_TCR1 bfin_read_SPORT1_TCR1 +#define bfin_write_SPORT_TCR2 bfin_write_SPORT1_TCR2 +#define bfin_write_SPORT_TX16 bfin_write_SPORT1_TX16 +#define bfin_read_SPORT_STAT bfin_read_SPORT1_STAT +#endif + +#define GPIO_SE CONFIG_SND_BFIN_AD73311_SE + +static struct snd_soc_machine bf5xx_ad73311; + +static int snd_ad73311_startup(void) +{ + pr_debug("%s enter\n", __func__); + + /* Pull up SE pin on AD73311L */ + gpio_set_value(GPIO_SE, 1); + return 0; +} + +static int snd_ad73311_configure(void) +{ + unsigned short ctrl_regs[6]; + unsigned short status = 0; + int count = 0; + + /* DMCLK = MCLK = 16.384 MHz + * SCLK = DMCLK/8 = 2.048 MHz + * Sample Rate = DMCLK/2048 = 8 KHz + */ + ctrl_regs[0] = AD_CONTROL | AD_WRITE | CTRL_REG_B | REGB_MCDIV(0) | \ + REGB_SCDIV(0) | REGB_DIRATE(0); + ctrl_regs[1] = AD_CONTROL | AD_WRITE | CTRL_REG_C | REGC_PUDEV | \ + REGC_PUADC | REGC_PUDAC | REGC_PUREF | REGC_REFUSE ; + ctrl_regs[2] = AD_CONTROL | AD_WRITE | CTRL_REG_D | REGD_OGS(2) | \ + REGD_IGS(2); + ctrl_regs[3] = AD_CONTROL | AD_WRITE | CTRL_REG_E | REGE_DA(0x1f); + ctrl_regs[4] = AD_CONTROL | AD_WRITE | CTRL_REG_F | REGF_SEEN ; + ctrl_regs[5] = AD_CONTROL | AD_WRITE | CTRL_REG_A | REGA_MODE_DATA; + + local_irq_disable(); + snd_ad73311_startup(); + udelay(1); + + bfin_write_SPORT_TCR1(TFSR); + bfin_write_SPORT_TCR2(0xF); + SSYNC(); + + /* SPORT Tx Register is a 8 x 16 FIFO, all the data can be put to + * FIFO before enable SPORT to transfer the data + */ + for (count = 0; count < 6; count++) + bfin_write_SPORT_TX16(ctrl_regs[count]); + SSYNC(); + bfin_write_SPORT_TCR1(bfin_read_SPORT_TCR1() | TSPEN); + SSYNC(); + + /* When TUVF is set, the data is already send out */ + while (!(status & TUVF) && count++ < 10000) { + udelay(1); + status = bfin_read_SPORT_STAT(); + SSYNC(); + } + bfin_write_SPORT_TCR1(bfin_read_SPORT_TCR1() & ~TSPEN); + SSYNC(); + local_irq_enable(); + + if (count == 10000) { + printk(KERN_ERR "ad73311: failed to configure codec\n"); + return -1; + } + return 0; +} + +static int bf5xx_probe(struct platform_device *pdev) +{ + int err; + if (gpio_request(GPIO_SE, "AD73311_SE")) { + printk(KERN_ERR "%s: Failed ro request GPIO_%d\n", __func__, GPIO_SE); + return -EBUSY; + } + + gpio_direction_output(GPIO_SE, 0); + + err = snd_ad73311_configure(); + if (err < 0) + return -EFAULT; + + return 0; +} + +static int bf5xx_ad73311_startup(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + + pr_debug("%s enter\n", __func__); + cpu_dai->private_data = sport_handle; + return 0; +} + +static int bf5xx_ad73311_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + int ret = 0; + + pr_debug("%s rate %d format %x\n", __func__, params_rate(params), + params_format(params)); + + /* set cpu DAI configuration */ + ret = cpu_dai->dai_ops.set_fmt(cpu_dai, SND_SOC_DAIFMT_DSP_A | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + return ret; + + return 0; +} + + +static struct snd_soc_ops bf5xx_ad73311_ops = { + .startup = bf5xx_ad73311_startup, + .hw_params = bf5xx_ad73311_hw_params, +}; + +static struct snd_soc_dai_link bf5xx_ad73311_dai = { + .name = "ad73311", + .stream_name = "AD73311", + .cpu_dai = &bf5xx_i2s_dai, + .codec_dai = &ad73311_dai, + .ops = &bf5xx_ad73311_ops, +}; + +static struct snd_soc_machine bf5xx_ad73311 = { + .name = "bf5xx_ad73311", + .probe = bf5xx_probe, + .dai_link = &bf5xx_ad73311_dai, + .num_links = 1, +}; + +static struct snd_soc_device bf5xx_ad73311_snd_devdata = { + .machine = &bf5xx_ad73311, + .platform = &bf5xx_i2s_soc_platform, + .codec_dev = &soc_codec_dev_ad73311, +}; + +static struct platform_device *bf52x_ad73311_snd_device; + +static int __init bf5xx_ad73311_init(void) +{ + int ret; + + pr_debug("%s enter\n", __func__); + bf52x_ad73311_snd_device = platform_device_alloc("soc-audio", -1); + if (!bf52x_ad73311_snd_device) + return -ENOMEM; + + platform_set_drvdata(bf52x_ad73311_snd_device, &bf5xx_ad73311_snd_devdata); + bf5xx_ad73311_snd_devdata.dev = &bf52x_ad73311_snd_device->dev; + ret = platform_device_add(bf52x_ad73311_snd_device); + + if (ret) + platform_device_put(bf52x_ad73311_snd_device); + + return ret; +} + +static void __exit bf5xx_ad73311_exit(void) +{ + pr_debug("%s enter\n", __func__); + platform_device_unregister(bf52x_ad73311_snd_device); +} + +module_init(bf5xx_ad73311_init); +module_exit(bf5xx_ad73311_exit); + +/* Module information */ +MODULE_AUTHOR("Cliff Cai"); +MODULE_DESCRIPTION("ALSA SoC AD73311 Blackfin"); +MODULE_LICENSE("GPL"); + |