diff options
Diffstat (limited to 'net/sctp/socket.c')
| -rw-r--r-- | net/sctp/socket.c | 691 |
1 files changed, 567 insertions, 124 deletions
diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 9df888e932c5..fc04d185fa33 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -1941,107 +1941,379 @@ static int sctp_setsockopt_autoclose(struct sock *sk, char __user *optval, * address's parameters: * * struct sctp_paddrparams { - * sctp_assoc_t spp_assoc_id; - * struct sockaddr_storage spp_address; - * uint32_t spp_hbinterval; - * uint16_t spp_pathmaxrxt; - * }; - * - * spp_assoc_id - (UDP style socket) This is filled in the application, - * and identifies the association for this query. + * sctp_assoc_t spp_assoc_id; + * struct sockaddr_storage spp_address; + * uint32_t spp_hbinterval; + * uint16_t spp_pathmaxrxt; + * uint32_t spp_pathmtu; + * uint32_t spp_sackdelay; + * uint32_t spp_flags; + * }; + * + * spp_assoc_id - (one-to-many style socket) This is filled in the + * application, and identifies the association for + * this query. * spp_address - This specifies which address is of interest. * spp_hbinterval - This contains the value of the heartbeat interval, - * in milliseconds. A value of 0, when modifying the - * parameter, specifies that the heartbeat on this - * address should be disabled. A value of UINT32_MAX - * (4294967295), when modifying the parameter, - * specifies that a heartbeat should be sent - * immediately to the peer address, and the current - * interval should remain unchanged. + * in milliseconds. If a value of zero + * is present in this field then no changes are to + * be made to this parameter. * spp_pathmaxrxt - This contains the maximum number of * retransmissions before this address shall be - * considered unreachable. + * considered unreachable. If a value of zero + * is present in this field then no changes are to + * be made to this parameter. + * spp_pathmtu - When Path MTU discovery is disabled the value + * specified here will be the "fixed" path mtu. + * Note that if the spp_address field is empty + * then all associations on this address will + * have this fixed path mtu set upon them. + * + * spp_sackdelay - When delayed sack is enabled, this value specifies + * the number of milliseconds that sacks will be delayed + * for. This value will apply to all addresses of an + * association if the spp_address field is empty. Note + * also, that if delayed sack is enabled and this + * value is set to 0, no change is made to the last + * recorded delayed sack timer value. + * + * spp_flags - These flags are used to control various features + * on an association. The flag field may contain + * zero or more of the following options. + * + * SPP_HB_ENABLE - Enable heartbeats on the + * specified address. Note that if the address + * field is empty all addresses for the association + * have heartbeats enabled upon them. + * + * SPP_HB_DISABLE - Disable heartbeats on the + * speicifed address. Note that if the address + * field is empty all addresses for the association + * will have their heartbeats disabled. Note also + * that SPP_HB_ENABLE and SPP_HB_DISABLE are + * mutually exclusive, only one of these two should + * be specified. Enabling both fields will have + * undetermined results. + * + * SPP_HB_DEMAND - Request a user initiated heartbeat + * to be made immediately. + * + * SPP_PMTUD_ENABLE - This field will enable PMTU + * discovery upon the specified address. Note that + * if the address feild is empty then all addresses + * on the association are effected. + * + * SPP_PMTUD_DISABLE - This field will disable PMTU + * discovery upon the specified address. Note that + * if the address feild is empty then all addresses + * on the association are effected. Not also that + * SPP_PMTUD_ENABLE and SPP_PMTUD_DISABLE are mutually + * exclusive. Enabling both will have undetermined + * results. + * + * SPP_SACKDELAY_ENABLE - Setting this flag turns + * on delayed sack. The time specified in spp_sackdelay + * is used to specify the sack delay for this address. Note + * that if spp_address is empty then all addresses will + * enable delayed sack and take on the sack delay + * value specified in spp_sackdelay. + * SPP_SACKDELAY_DISABLE - Setting this flag turns + * off delayed sack. If the spp_address field is blank then + * delayed sack is disabled for the entire association. Note + * also that this field is mutually exclusive to + * SPP_SACKDELAY_ENABLE, setting both will have undefined + * results. */ +int sctp_apply_peer_addr_params(struct sctp_paddrparams *params, + struct sctp_transport *trans, + struct sctp_association *asoc, + struct sctp_sock *sp, + int hb_change, + int pmtud_change, + int sackdelay_change) +{ + int error; + + if (params->spp_flags & SPP_HB_DEMAND && trans) { + error = sctp_primitive_REQUESTHEARTBEAT (trans->asoc, trans); + if (error) + return error; + } + + if (params->spp_hbinterval) { + if (trans) { + trans->hbinterval = msecs_to_jiffies(params->spp_hbinterval); + } else if (asoc) { + asoc->hbinterval = msecs_to_jiffies(params->spp_hbinterval); + } else { + sp->hbinterval = params->spp_hbinterval; + } + } + + if (hb_change) { + if (trans) { + trans->param_flags = + (trans->param_flags & ~SPP_HB) | hb_change; + } else if (asoc) { + asoc->param_flags = + (asoc->param_flags & ~SPP_HB) | hb_change; + } else { + sp->param_flags = + (sp->param_flags & ~SPP_HB) | hb_change; + } + } + + if (params->spp_pathmtu) { + if (trans) { + trans->pathmtu = params->spp_pathmtu; + sctp_assoc_sync_pmtu(asoc); + } else if (asoc) { + asoc->pathmtu = params->spp_pathmtu; + sctp_frag_point(sp, params->spp_pathmtu); + } else { + sp->pathmtu = params->spp_pathmtu; + } + } + + if (pmtud_change) { + if (trans) { + int update = (trans->param_flags & SPP_PMTUD_DISABLE) && + (params->spp_flags & SPP_PMTUD_ENABLE); + trans->param_flags = + (trans->param_flags & ~SPP_PMTUD) | pmtud_change; + if (update) { + sctp_transport_pmtu(trans); + sctp_assoc_sync_pmtu(asoc); + } + } else if (asoc) { + asoc->param_flags = + (asoc->param_flags & ~SPP_PMTUD) | pmtud_change; + } else { + sp->param_flags = + (sp->param_flags & ~SPP_PMTUD) | pmtud_change; + } + } + + if (params->spp_sackdelay) { + if (trans) { + trans->sackdelay = + msecs_to_jiffies(params->spp_sackdelay); + } else if (asoc) { + asoc->sackdelay = + msecs_to_jiffies(params->spp_sackdelay); + } else { + sp->sackdelay = params->spp_sackdelay; + } + } + + if (sackdelay_change) { + if (trans) { + trans->param_flags = + (trans->param_flags & ~SPP_SACKDELAY) | + sackdelay_change; + } else if (asoc) { + asoc->param_flags = + (asoc->param_flags & ~SPP_SACKDELAY) | + sackdelay_change; + } else { + sp->param_flags = + (sp->param_flags & ~SPP_SACKDELAY) | + sackdelay_change; + } + } + + if (params->spp_pathmaxrxt) { + if (trans) { + trans->pathmaxrxt = params->spp_pathmaxrxt; + } else if (asoc) { + asoc->pathmaxrxt = params->spp_pathmaxrxt; + } else { + sp->pathmaxrxt = params->spp_pathmaxrxt; + } + } + + return 0; +} + static int sctp_setsockopt_peer_addr_params(struct sock *sk, char __user *optval, int optlen) { - struct sctp_paddrparams params; - struct sctp_transport *trans; + struct sctp_paddrparams params; + struct sctp_transport *trans = NULL; + struct sctp_association *asoc = NULL; + struct sctp_sock *sp = sctp_sk(sk); int error; + int hb_change, pmtud_change, sackdelay_change; if (optlen != sizeof(struct sctp_paddrparams)) - return -EINVAL; + return - EINVAL; + if (copy_from_user(¶ms, optval, optlen)) return -EFAULT; - /* - * API 7. Socket Options (setting the default value for the endpoint) - * All options that support specific settings on an association by - * filling in either an association id variable or a sockaddr_storage - * SHOULD also support setting of the same value for the entire endpoint - * (i.e. future associations). To accomplish this the following logic is - * used when setting one of these options: - - * c) If neither the sockaddr_storage or association identification is - * set i.e. the sockaddr_storage is set to all 0's (INADDR_ANY) and - * the association identification is 0, the settings are a default - * and to be applied to the endpoint (all future associations). - */ + /* Validate flags and value parameters. */ + hb_change = params.spp_flags & SPP_HB; + pmtud_change = params.spp_flags & SPP_PMTUD; + sackdelay_change = params.spp_flags & SPP_SACKDELAY; + + if (hb_change == SPP_HB || + pmtud_change == SPP_PMTUD || + sackdelay_change == SPP_SACKDELAY || + params.spp_sackdelay > 500 || + (params.spp_pathmtu + && params.spp_pathmtu < SCTP_DEFAULT_MINSEGMENT)) + return -EINVAL; - /* update default value for endpoint (all future associations) */ - if (!params.spp_assoc_id && - sctp_is_any(( union sctp_addr *)¶ms.spp_address)) { - /* Manual heartbeat on an endpoint is invalid. */ - if (0xffffffff == params.spp_hbinterval) + /* If an address other than INADDR_ANY is specified, and + * no transport is found, then the request is invalid. + */ + if (!sctp_is_any(( union sctp_addr *)¶ms.spp_address)) { + trans = sctp_addr_id2transport(sk, ¶ms.spp_address, + params.spp_assoc_id); + if (!trans) return -EINVAL; - else if (params.spp_hbinterval) - sctp_sk(sk)->paddrparam.spp_hbinterval = - params.spp_hbinterval; - if (params.spp_pathmaxrxt) - sctp_sk(sk)->paddrparam.spp_pathmaxrxt = - params.spp_pathmaxrxt; - return 0; } - trans = sctp_addr_id2transport(sk, ¶ms.spp_address, - params.spp_assoc_id); - if (!trans) + /* Get association, if assoc_id != 0 and the socket is a one + * to many style socket, and an association was not found, then + * the id was invalid. + */ + asoc = sctp_id2assoc(sk, params.spp_assoc_id); + if (!asoc && params.spp_assoc_id && sctp_style(sk, UDP)) return -EINVAL; - /* Applications can enable or disable heartbeats for any peer address - * of an association, modify an address's heartbeat interval, force a - * heartbeat to be sent immediately, and adjust the address's maximum - * number of retransmissions sent before an address is considered - * unreachable. - * - * The value of the heartbeat interval, in milliseconds. A value of - * UINT32_MAX (4294967295), when modifying the parameter, specifies - * that a heartbeat should be sent immediately to the peer address, - * and the current interval should remain unchanged. + /* Heartbeat demand can only be sent on a transport or + * association, but not a socket. */ - if (0xffffffff == params.spp_hbinterval) { - error = sctp_primitive_REQUESTHEARTBEAT (trans->asoc, trans); - if (error) - return error; - } else { - /* The value of the heartbeat interval, in milliseconds. A value of 0, - * when modifying the parameter, specifies that the heartbeat on this - * address should be disabled. + if (params.spp_flags & SPP_HB_DEMAND && !trans && !asoc) + return -EINVAL; + + /* Process parameters. */ + error = sctp_apply_peer_addr_params(¶ms, trans, asoc, sp, + hb_change, pmtud_change, + sackdelay_change); + + if (error) + return error; + + /* If changes are for association, also apply parameters to each + * transport. */ - if (params.spp_hbinterval) { - trans->hb_allowed = 1; - trans->hb_interval = - msecs_to_jiffies(params.spp_hbinterval); - } else - trans->hb_allowed = 0; + if (!trans && asoc) { + struct list_head *pos; + + list_for_each(pos, &asoc->peer.transport_addr_list) { + trans = list_entry(pos, struct sctp_transport, + transports); + sctp_apply_peer_addr_params(¶ms, trans, asoc, sp, + hb_change, pmtud_change, + sackdelay_change); + } } - /* spp_pathmaxrxt contains the maximum number of retransmissions - * before this address shall be considered unreachable. - */ - if (params.spp_pathmaxrxt) - trans->max_retrans = params.spp_pathmaxrxt; + return 0; +} + +/* 7.1.24. Delayed Ack Timer (SCTP_DELAYED_ACK_TIME) + * + * This options will get or set the delayed ack timer. The time is set + * in milliseconds. If the assoc_id is 0, then this sets or gets the + * endpoints default delayed ack timer value. If the assoc_id field is + * non-zero, then the set or get effects the specified association. + * + * struct sctp_assoc_value { + * sctp_assoc_t assoc_id; + * uint32_t assoc_value; + * }; + * + * assoc_id - This parameter, indicates which association the + * user is preforming an action upon. Note that if + * this field's value is zero then the endpoints + * default value is changed (effecting future + * associations only). + * + * assoc_value - This parameter contains the number of milliseconds + * that the user is requesting the delayed ACK timer + * be set to. Note that this value is defined in + * the standard to be between 200 and 500 milliseconds. + * + * Note: a value of zero will leave the value alone, + * but disable SACK delay. A non-zero value will also + * enable SACK delay. + */ +static int sctp_setsockopt_delayed_ack_time(struct sock *sk, + char __user *optval, int optlen) +{ + struct sctp_assoc_value params; + struct sctp_transport *trans = NULL; + struct sctp_association *asoc = NULL; + struct sctp_sock *sp = sctp_sk(sk); + + if (optlen != sizeof(struct sctp_assoc_value)) + return - EINVAL; + + if (copy_from_user(¶ms, optval, optlen)) + return -EFAULT; + + /* Validate value parameter. */ + if (params.assoc_value > 500) + return -EINVAL; + + /* Get association, if assoc_id != 0 and the socket is a one + * to many style socket, and an association was not found, then + * the id was invalid. + */ + asoc = sctp_id2assoc(sk, params.assoc_id); + if (!asoc && params.assoc_id && sctp_style(sk, UDP)) + return -EINVAL; + + if (params.assoc_value) { + if (asoc) { + asoc->sackdelay = + msecs_to_jiffies(params.assoc_value); + asoc->param_flags = + (asoc->param_flags & ~SPP_SACKDELAY) | + SPP_SACKDELAY_ENABLE; + } else { + sp->sackdelay = params.assoc_value; + sp->param_flags = + (sp->param_flags & ~SPP_SACKDELAY) | + SPP_SACKDELAY_ENABLE; + } + } else { + if (asoc) { + asoc->param_flags = + (asoc->param_flags & ~SPP_SACKDELAY) | + SPP_SACKDELAY_DISABLE; + } else { + sp->param_flags = + (sp->param_flags & ~SPP_SACKDELAY) | + SPP_SACKDELAY_DISABLE; + } + } + + /* If change is for association, also apply to each transport. */ + if (asoc) { + struct list_head *pos; + + list_for_each(pos, &asoc->peer.transport_addr_list) { + trans = list_entry(pos, struct sctp_transport, + transports); + if (params.assoc_value) { + trans->sackdelay = + msecs_to_jiffies(params.assoc_value); + trans->param_flags = + (trans->param_flags & ~SPP_SACKDELAY) | + SPP_SACKDELAY_ENABLE; + } else { + trans->param_flags = + (trans->param_flags & ~SPP_SACKDELAY) | + SPP_SACKDELAY_DISABLE; + } + } + } + return 0; } @@ -2334,7 +2606,7 @@ static int sctp_setsockopt_maxseg(struct sock *sk, char __user *optval, int optl /* Update the frag_point of the existing associations. */ list_for_each(pos, &(sp->ep->asocs)) { asoc = list_entry(pos, struct sctp_association, asocs); - asoc->frag_point = sctp_frag_point(sp, asoc->pmtu); + asoc->frag_point = sctp_frag_point(sp, asoc->pathmtu); } return 0; @@ -2491,6 +2763,10 @@ SCTP_STATIC int sctp_setsockopt(struct sock *sk, int level, int optname, retval = sctp_setsockopt_peer_addr_params(sk, optval, optlen); break; + case SCTP_DELAYED_ACK_TIME: + retval = sctp_setsockopt_delayed_ack_time(sk, optval, optlen); + break; + case SCTP_INITMSG: retval = sctp_setsockopt_initmsg(sk, optval, optlen); break; @@ -2715,8 +2991,13 @@ SCTP_STATIC int sctp_init_sock(struct sock *sk) /* Default Peer Address Parameters. These defaults can * be modified via SCTP_PEER_ADDR_PARAMS */ - sp->paddrparam.spp_hbinterval = jiffies_to_msecs(sctp_hb_interval); - sp->paddrparam.spp_pathmaxrxt = sctp_max_retrans_path; + sp->hbinterval = jiffies_to_msecs(sctp_hb_interval); + sp->pathmaxrxt = sctp_max_retrans_path; + sp->pathmtu = 0; // allow default discovery + sp->sackdelay = sctp_sack_timeout; + sp->param_flags = SPP_HB_ENABLE | + SPP_PMTUD_ENABLE | + SPP_SACKDELAY_ENABLE; /* If enabled no SCTP message fragmentation will be performed. * Configure through SCTP_DISABLE_FRAGMENTS socket option. @@ -2865,7 +3146,7 @@ static int sctp_getsockopt_sctp_status(struct sock *sk, int len, status.sstat_primary.spinfo_cwnd = transport->cwnd; status.sstat_primary.spinfo_srtt = transport->srtt; status.sstat_primary.spinfo_rto = jiffies_to_msecs(transport->rto); - status.sstat_primary.spinfo_mtu = transport->pmtu; + status.sstat_primary.spinfo_mtu = transport->pathmtu; if (status.sstat_primary.spinfo_state == SCTP_UNKNOWN) status.sstat_primary.spinfo_state = SCTP_ACTIVE; @@ -2924,7 +3205,7 @@ static int sctp_getsockopt_peer_addr_info(struct sock *sk, int len, pinfo.spinfo_cwnd = transport->cwnd; pinfo.spinfo_srtt = transport->srtt; pinfo.spinfo_rto = jiffies_to_msecs(transport->rto); - pinfo.spinfo_mtu = transport->pmtu; + pinfo.spinfo_mtu = transport->pathmtu; if (pinfo.spinfo_state == SCTP_UNKNOWN) pinfo.spinfo_state = SCTP_ACTIVE; @@ -3086,69 +3367,227 @@ out: * address's parameters: * * struct sctp_paddrparams { - * sctp_assoc_t spp_assoc_id; - * struct sockaddr_storage spp_address; - * uint32_t spp_hbinterval; - * uint16_t spp_pathmaxrxt; - * }; - * - * spp_assoc_id - (UDP style socket) This is filled in the application, - * and identifies the association for this query. + * sctp_assoc_t spp_assoc_id; + * struct sockaddr_storage spp_address; + * uint32_t spp_hbinterval; + * uint16_t spp_pathmaxrxt; + * uint32_t spp_pathmtu; + * uint32_t spp_sackdelay; + * uint32_t spp_flags; + * }; + * + * spp_assoc_id - (one-to-many style socket) This is filled in the + * application, and identifies the association for + * this query. * spp_address - This specifies which address is of interest. * spp_hbinterval - This contains the value of the heartbeat interval, - * in milliseconds. A value of 0, when modifying the - * parameter, specifies that the heartbeat on this - * address should be disabled. A value of UINT32_MAX - * (4294967295), when modifying the parameter, - * specifies that a heartbeat should be sent - * immediately to the peer address, and the current - * interval should remain unchanged. + * in milliseconds. If a value of zero + * is present in this field then no changes are to + * be made to this parameter. * spp_pathmaxrxt - This contains the maximum number of * retransmissions before this address shall be - * considered unreachable. + * considered unreachable. If a value of zero + * is present in this field then no changes are to + * be made to this parameter. + * spp_pathmtu - When Path MTU discovery is disabled the value + * specified here will be the "fixed" path mtu. + * Note that if the spp_address field is empty + * then all associations on this address will + * have this fixed path mtu set upon them. + * + * spp_sackdelay - When delayed sack is enabled, this value specifies + * the number of milliseconds that sacks will be delayed + * for. This value will apply to all addresses of an + * association if the spp_address field is empty. Note + * also, that if delayed sack is enabled and this + * value is set to 0, no change is made to the last + * recorded delayed sack timer value. + * + * spp_flags - These flags are used to control various features + * on an association. The flag field may contain + * zero or more of the following options. + * + * SPP_HB_ENABLE - Enable heartbeats on the + * specified address. Note that if the address + * field is empty all addresses for the association + * have heartbeats enabled upon them. + * + * SPP_HB_DISABLE - Disable heartbeats on the + * speicifed address. Note that if the address + * field is empty all addresses for the association + * will have their heartbeats disabled. Note also + * that SPP_HB_ENABLE and SPP_HB_DISABLE are + * mutually exclusive, only one of these two should + * be specified. Enabling both fields will have + * undetermined results. + * + * SPP_HB_DEMAND - Request a user initiated heartbeat + * to be made immediately. + * + * SPP_PMTUD_ENABLE - This field will enable PMTU + * discovery upon the specified address. Note that + * if the address feild is empty then all addresses + * on the association are effected. + * + * SPP_PMTUD_DISABLE - This field will disable PMTU + * discovery upon the specified address. Note that + * if the address feild is empty then all addresses + * on the association are effected. Not also that + * SPP_PMTUD_ENABLE and SPP_PMTUD_DISABLE are mutually + * exclusive. Enabling both will have undetermined + * results. + * + * SPP_SACKDELAY_ENABLE - Setting this flag turns + * on delayed sack. The time specified in spp_sackdelay + * is used to specify the sack delay for this address. Note + * that if spp_address is empty then all addresses will + * enable delayed sack and take on the sack delay + * value specified in spp_sackdelay. + * SPP_SACKDELAY_DISABLE - Setting this flag turns + * off delayed sack. If the spp_address field is blank then + * delayed sack is disabled for the entire association. Note + * also that this field is mutually exclusive to + * SPP_SACKDELAY_ENABLE, setting both will have undefined + * results. */ static int sctp_getsockopt_peer_addr_params(struct sock *sk, int len, - char __user *optval, int __user *optlen) + char __user *optval, int __user *optlen) { - struct sctp_paddrparams params; - struct sctp_transport *trans; + struct sctp_paddrparams params; + struct sctp_transport *trans = NULL; + struct sctp_association *asoc = NULL; + struct sctp_sock *sp = sctp_sk(sk); if (len != sizeof(struct sctp_paddrparams)) return -EINVAL; + if (copy_from_user(¶ms, optval, len)) return -EFAULT; - /* If no association id is specified retrieve the default value - * for the endpoint that will be used for all future associations + /* If an address other than INADDR_ANY is specified, and + * no transport is found, then the request is invalid. */ - if (!params.spp_assoc_id && - sctp_is_any(( union sctp_addr *)¶ms.spp_address)) { - params.spp_hbinterval = sctp_sk(sk)->paddrparam.spp_hbinterval; - params.spp_pathmaxrxt = sctp_sk(sk)->paddrparam.spp_pathmaxrxt; - - goto done; + if (!sctp_is_any(( union sctp_addr *)¶ms.spp_address)) { + trans = sctp_addr_id2transport(sk, ¶ms.spp_address, + params.spp_assoc_id); + if (!trans) { + SCTP_DEBUG_PRINTK("Failed no transport\n"); + return -EINVAL; + } } - trans = sctp_addr_id2transport(sk, ¶ms.spp_address, - params.spp_assoc_id); - if (!trans) + /* Get association, if assoc_id != 0 and the socket is a one + * to many style socket, and an association was not found, then + * the id was invalid. + */ + asoc = sctp_id2assoc(sk, params.spp_assoc_id); + if (!asoc && params.spp_assoc_id && sctp_style(sk, UDP)) { + SCTP_DEBUG_PRINTK("Failed no association\n"); return -EINVAL; + } - /* The value of the heartbeat interval, in milliseconds. A value of 0, - * when modifying the parameter, specifies that the heartbeat on this - * address should be disabled. - */ - if (!trans->hb_allowed) - params.spp_hbinterval = 0; - else - params.spp_hbinterval = jiffies_to_msecs(trans->hb_interval); + if (trans) { + /* Fetch transport values. */ + params.spp_hbinterval = jiffies_to_msecs(trans->hbinterval); + params.spp_pathmtu = trans->pathmtu; + params.spp_pathmaxrxt = trans->pathmaxrxt; + params.spp_sackdelay = jiffies_to_msecs(trans->sackdelay); + + /*draft-11 doesn't say what to return in spp_flags*/ + params.spp_flags = trans->param_flags; + } else if (asoc) { + /* Fetch association values. */ + params.spp_hbinterval = jiffies_to_msecs(asoc->hbinterval); + params.spp_pathmtu = asoc->pathmtu; + params.spp_pathmaxrxt = asoc->pathmaxrxt; + params.spp_sackdelay = jiffies_to_msecs(asoc->sackdelay); + + /*draft-11 doesn't say what to return in spp_flags*/ + params.spp_flags = asoc->param_flags; + } else { + /* Fetch socket values. */ + params.spp_hbinterval = sp->hbinterval; + params.spp_pathmtu = sp->pathmtu; + params.spp_sackdelay = sp->sackdelay; + params.spp_pathmaxrxt = sp->pathmaxrxt; + + /*draft-11 doesn't say what to return in spp_flags*/ + params.spp_flags = sp->param_flags; + } - /* spp_pathmaxrxt contains the maximum number of retransmissions - * before this address shall be considered unreachable. - */ - params.spp_pathmaxrxt = trans->max_retrans; + if (copy_to_user(optval, ¶ms, len)) + return -EFAULT; + + if (put_user(len, optlen)) + return -EFAULT; + + return 0; +} + +/* 7.1.24. Delayed Ack Timer (SCTP_DELAYED_ACK_TIME) + * + * This options will get or set the delayed ack timer. The time is set + * in milliseconds. If the assoc_id is 0, then this sets or gets the + * endpoints default delayed ack timer value. If the assoc_id field is + * non-zero, then the set or get effects the specified association. + * + * struct sctp_assoc_value { + * sctp_assoc_t assoc_id; + * uint32_t assoc_value; + * }; + * + * assoc_id - This parameter, indicates which association the + * user is preforming an action upon. Note that if + * this field's value is zero then the endpoints + * default value is changed (effecting future + * associations only). + * + * assoc_value - This parameter contains the number of milliseconds + * that the user is requesting the delayed ACK timer + * be set to. Note that this value is defined in + * the standard to be between 200 and 500 milliseconds. + * + * Note: a value of zero will leave the value alone, + * but disable SACK delay. A non-zero value will also + * enable SACK delay. + */ +static int sctp_getsockopt_delayed_ack_time(struct sock *sk, int len, + char __user *optval, + int __user *optlen) +{ + struct sctp_assoc_value params; + struct sctp_association *asoc = NULL; + struct sctp_sock *sp = sctp_sk(sk); + + if (len != sizeof(struct sctp_assoc_value)) + return - EINVAL; + + if (copy_from_user(¶ms, optval, len)) + return -EFAULT; + + /* Get association, if assoc_id != 0 and the socket is a one + * to many style socket, and an association was not found, then + * the id was invalid. + */ + asoc = sctp_id2assoc(sk, params.assoc_id); + if (!asoc && params.assoc_id && sctp_style(sk, UDP)) + return -EINVAL; + + if (asoc) { + /* Fetch association values. */ + if (asoc->param_flags & SPP_SACKDELAY_ENABLE) + params.assoc_value = jiffies_to_msecs( + asoc->sackdelay); + else + params.assoc_value = 0; + } else { + /* Fetch socket values. */ + if (sp->param_flags & SPP_SACKDELAY_ENABLE) + params.assoc_value = sp->sackdelay; + else + params.assoc_value = 0; + } -done: if (copy_to_user(optval, ¶ms, len)) return -EFAULT; @@ -4015,6 +4454,10 @@ SCTP_STATIC int sctp_getsockopt(struct sock *sk, int level, int optname, retval = sctp_getsockopt_peer_addr_params(sk, len, optval, optlen); break; + case SCTP_DELAYED_ACK_TIME: + retval = sctp_getsockopt_delayed_ack_time(sk, len, optval, + optlen); + break; case SCTP_INITMSG: retval = sctp_getsockopt_initmsg(sk, len, optval, optlen); break; |