diff options
Diffstat (limited to 'net/mac80211/mesh_plink.c')
-rw-r--r-- | net/mac80211/mesh_plink.c | 120 |
1 files changed, 104 insertions, 16 deletions
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index 81e612682bc3..f7526e509aa8 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -55,6 +55,66 @@ static inline void mesh_plink_fsm_restart(struct sta_info *sta) sta->plink_retries = 0; } +/* + * mesh_set_short_slot_time - enable / disable ERP short slot time. + * + * The standard indirectly mandates mesh STAs to turn off short slot time by + * disallowing advertising this (802.11-2012 8.4.1.4), but that doesn't mean we + * can't be sneaky about it. Enable short slot time if all mesh STAs in the + * MBSS support ERP rates. + * + * Returns BSS_CHANGED_ERP_SLOT or 0 for no change. + */ +static u32 mesh_set_short_slot_time(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_local *local = sdata->local; + enum ieee80211_band band = ieee80211_get_sdata_band(sdata); + struct ieee80211_supported_band *sband = local->hw.wiphy->bands[band]; + struct sta_info *sta; + u32 erp_rates = 0, changed = 0; + int i; + bool short_slot = false; + + if (band == IEEE80211_BAND_5GHZ) { + /* (IEEE 802.11-2012 19.4.5) */ + short_slot = true; + goto out; + } else if (band != IEEE80211_BAND_2GHZ || + (band == IEEE80211_BAND_2GHZ && + local->hw.flags & IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE)) + goto out; + + for (i = 0; i < sband->n_bitrates; i++) + if (sband->bitrates[i].flags & IEEE80211_RATE_ERP_G) + erp_rates |= BIT(i); + + if (!erp_rates) + goto out; + + rcu_read_lock(); + list_for_each_entry_rcu(sta, &local->sta_list, list) { + if (sdata != sta->sdata || + sta->plink_state != NL80211_PLINK_ESTAB) + continue; + + short_slot = false; + if (erp_rates & sta->sta.supp_rates[band]) + short_slot = true; + else + break; + } + rcu_read_unlock(); + +out: + if (sdata->vif.bss_conf.use_short_slot != short_slot) { + sdata->vif.bss_conf.use_short_slot = short_slot; + changed = BSS_CHANGED_ERP_SLOT; + mpl_dbg(sdata, "mesh_plink %pM: ERP short slot time %d\n", + sdata->vif.addr, short_slot); + } + return changed; +} + /** * mesh_set_ht_prot_mode - set correct HT protection mode * @@ -141,6 +201,9 @@ static u32 __mesh_plink_deactivate(struct sta_info *sta) sta->plink_state = NL80211_PLINK_BLOCKED; mesh_path_flush_by_nexthop(sta); + ieee80211_mps_sta_status_update(sta); + changed |= ieee80211_mps_local_status_update(sdata); + return changed; } @@ -151,7 +214,7 @@ static u32 __mesh_plink_deactivate(struct sta_info *sta) * * All mesh paths with this peer as next hop will be flushed */ -void mesh_plink_deactivate(struct sta_info *sta) +u32 mesh_plink_deactivate(struct sta_info *sta) { struct ieee80211_sub_if_data *sdata = sta->sdata; u32 changed; @@ -164,7 +227,7 @@ void mesh_plink_deactivate(struct sta_info *sta) sta->reason); spin_unlock_bh(&sta->lock); - ieee80211_bss_info_change_notify(sdata, changed); + return changed; } static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata, @@ -310,8 +373,7 @@ static void mesh_sta_info_init(struct ieee80211_sub_if_data *sdata, if (elems->ht_cap_elem && sdata->vif.bss_conf.chandef.width != NL80211_CHAN_WIDTH_20_NOHT) ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, - elems->ht_cap_elem, - &sta->sta.ht_cap); + elems->ht_cap_elem, sta); else memset(&sta->sta.ht_cap, 0, sizeof(sta->sta.ht_cap)); @@ -320,8 +382,7 @@ static void mesh_sta_info_init(struct ieee80211_sub_if_data *sdata, if (!(elems->ht_operation->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) - sta->sta.ht_cap.cap &= - ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; + sta->sta.bandwidth = IEEE80211_STA_RX_BW_20; ieee80211_ht_oper_to_chandef(sdata->vif.bss_conf.chandef.chan, elems->ht_operation, &chandef); if (sta->ch_width != chandef.width) @@ -431,6 +492,7 @@ void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata, struct ieee802_11_elems *elems) { struct sta_info *sta; + u32 changed = 0; sta = mesh_sta_info_get(sdata, hw_addr, elems); if (!sta) @@ -441,10 +503,12 @@ void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata, sdata->u.mesh.accepting_plinks && sdata->u.mesh.mshcfg.auto_open_plinks && rssi_threshold_check(sta, sdata)) - mesh_plink_open(sta); + changed = mesh_plink_open(sta); + ieee80211_mps_frame_release(sta, elems); out: rcu_read_unlock(); + ieee80211_mbss_info_change_notify(sdata, changed); } static void mesh_plink_timer(unsigned long data) @@ -528,6 +592,13 @@ static void mesh_plink_timer(unsigned long data) #ifdef CONFIG_PM void mesh_plink_quiesce(struct sta_info *sta) { + if (!ieee80211_vif_is_mesh(&sta->sdata->vif)) + return; + + /* no kernel mesh sta timers have been initialized */ + if (sta->sdata->u.mesh.security != IEEE80211_MESH_SEC_NONE) + return; + if (del_timer_sync(&sta->plink_timer)) sta->plink_timer_was_running = true; } @@ -550,13 +621,14 @@ static inline void mesh_plink_timer_set(struct sta_info *sta, int timeout) add_timer(&sta->plink_timer); } -int mesh_plink_open(struct sta_info *sta) +u32 mesh_plink_open(struct sta_info *sta) { __le16 llid; struct ieee80211_sub_if_data *sdata = sta->sdata; + u32 changed; if (!test_sta_flag(sta, WLAN_STA_AUTH)) - return -EPERM; + return 0; spin_lock_bh(&sta->lock); get_random_bytes(&llid, 2); @@ -564,7 +636,7 @@ int mesh_plink_open(struct sta_info *sta) if (sta->plink_state != NL80211_PLINK_LISTEN && sta->plink_state != NL80211_PLINK_BLOCKED) { spin_unlock_bh(&sta->lock); - return -EBUSY; + return 0; } sta->plink_state = NL80211_PLINK_OPN_SNT; mesh_plink_timer_set(sta, sdata->u.mesh.mshcfg.dot11MeshRetryTimeout); @@ -573,13 +645,16 @@ int mesh_plink_open(struct sta_info *sta) "Mesh plink: starting establishment with %pM\n", sta->sta.addr); - return mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_OPEN, - sta->sta.addr, llid, 0, 0); + /* set the non-peer mode to active during peering */ + changed = ieee80211_mps_local_status_update(sdata); + + mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_OPEN, + sta->sta.addr, llid, 0, 0); + return changed; } -void mesh_plink_block(struct sta_info *sta) +u32 mesh_plink_block(struct sta_info *sta) { - struct ieee80211_sub_if_data *sdata = sta->sdata; u32 changed; spin_lock_bh(&sta->lock); @@ -587,7 +662,7 @@ void mesh_plink_block(struct sta_info *sta) sta->plink_state = NL80211_PLINK_BLOCKED; spin_unlock_bh(&sta->lock); - ieee80211_bss_info_change_notify(sdata, changed); + return changed; } @@ -806,6 +881,10 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m sta->llid = llid; mesh_plink_timer_set(sta, mshcfg->dot11MeshRetryTimeout); + + /* set the non-peer mode to active during peering */ + changed |= ieee80211_mps_local_status_update(sdata); + spin_unlock_bh(&sta->lock); mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_OPEN, @@ -896,8 +975,12 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m spin_unlock_bh(&sta->lock); changed |= mesh_plink_inc_estab_count(sdata); changed |= mesh_set_ht_prot_mode(sdata); + changed |= mesh_set_short_slot_time(sdata); mpl_dbg(sdata, "Mesh plink with %pM ESTABLISHED\n", sta->sta.addr); + ieee80211_mps_sta_status_update(sta); + changed |= ieee80211_mps_set_sta_local_pm(sta, + mshcfg->power_mode); break; default: spin_unlock_bh(&sta->lock); @@ -931,11 +1014,15 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m spin_unlock_bh(&sta->lock); changed |= mesh_plink_inc_estab_count(sdata); changed |= mesh_set_ht_prot_mode(sdata); + changed |= mesh_set_short_slot_time(sdata); mpl_dbg(sdata, "Mesh plink with %pM ESTABLISHED\n", sta->sta.addr); mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_CONFIRM, sta->sta.addr, llid, plid, 0); + ieee80211_mps_sta_status_update(sta); + changed |= ieee80211_mps_set_sta_local_pm(sta, + mshcfg->power_mode); break; default: spin_unlock_bh(&sta->lock); @@ -954,6 +1041,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m mod_plink_timer(sta, mshcfg->dot11MeshHoldingTimeout); spin_unlock_bh(&sta->lock); changed |= mesh_set_ht_prot_mode(sdata); + changed |= mesh_set_short_slot_time(sdata); mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_CLOSE, sta->sta.addr, llid, plid, reason); break; @@ -1002,5 +1090,5 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m rcu_read_unlock(); if (changed) - ieee80211_bss_info_change_notify(sdata, changed); + ieee80211_mbss_info_change_notify(sdata, changed); } |