diff options
Diffstat (limited to 'init/Kconfig')
| -rw-r--r-- | init/Kconfig | 143 |
1 files changed, 81 insertions, 62 deletions
diff --git a/init/Kconfig b/init/Kconfig index 01180da49add..22616cd434bc 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -20,12 +20,8 @@ config CONSTRUCTORS bool depends on !UML -config HAVE_IRQ_WORK - bool - config IRQ_WORK bool - depends on HAVE_IRQ_WORK config BUILDTIME_EXTABLE_SORT bool @@ -33,35 +29,8 @@ config BUILDTIME_EXTABLE_SORT menu "General setup" config EXPERIMENTAL - bool "Prompt for development and/or incomplete code/drivers" - ---help--- - Some of the various things that Linux supports (such as network - drivers, file systems, network protocols, etc.) can be in a state - of development where the functionality, stability, or the level of - testing is not yet high enough for general use. This is usually - known as the "alpha-test" phase among developers. If a feature is - currently in alpha-test, then the developers usually discourage - uninformed widespread use of this feature by the general public to - avoid "Why doesn't this work?" type mail messages. However, active - testing and use of these systems is welcomed. Just be aware that it - may not meet the normal level of reliability or it may fail to work - in some special cases. Detailed bug reports from people familiar - with the kernel internals are usually welcomed by the developers - (before submitting bug reports, please read the documents - <file:README>, <file:MAINTAINERS>, <file:REPORTING-BUGS>, - <file:Documentation/BUG-HUNTING>, and - <file:Documentation/oops-tracing.txt> in the kernel source). - - This option will also make obsoleted drivers available. These are - drivers that have been replaced by something else, and/or are - scheduled to be removed in a future kernel release. - - Unless you intend to help test and develop a feature or driver that - falls into this category, or you have a situation that requires - using these features, you should probably say N here, which will - cause the configurator to present you with fewer choices. If - you say Y here, you will be offered the choice of using features or - drivers that are currently considered to be in the alpha-test phase. + bool + default y config BROKEN bool @@ -247,7 +216,7 @@ config SYSVIPC_SYSCTL config POSIX_MQUEUE bool "POSIX Message Queues" - depends on NET && EXPERIMENTAL + depends on NET ---help--- POSIX variant of message queues is a part of IPC. In POSIX message queues every message has a priority which decides about succession @@ -326,10 +295,13 @@ source "kernel/time/Kconfig" menu "CPU/Task time and stats accounting" +config VIRT_CPU_ACCOUNTING + bool + choice prompt "Cputime accounting" default TICK_CPU_ACCOUNTING if !PPC64 - default VIRT_CPU_ACCOUNTING if PPC64 + default VIRT_CPU_ACCOUNTING_NATIVE if PPC64 # Kind of a stub config for the pure tick based cputime accounting config TICK_CPU_ACCOUNTING @@ -342,9 +314,10 @@ config TICK_CPU_ACCOUNTING If unsure, say Y. -config VIRT_CPU_ACCOUNTING +config VIRT_CPU_ACCOUNTING_NATIVE bool "Deterministic task and CPU time accounting" depends on HAVE_VIRT_CPU_ACCOUNTING + select VIRT_CPU_ACCOUNTING help Select this option to enable more accurate task and CPU time accounting. This is done by reading a CPU counter on each @@ -354,6 +327,23 @@ config VIRT_CPU_ACCOUNTING this also enables accounting of stolen time on logically-partitioned systems. +config VIRT_CPU_ACCOUNTING_GEN + bool "Full dynticks CPU time accounting" + depends on HAVE_CONTEXT_TRACKING && 64BIT + select VIRT_CPU_ACCOUNTING + select CONTEXT_TRACKING + help + Select this option to enable task and CPU time accounting on full + dynticks systems. This accounting is implemented by watching every + kernel-user boundaries using the context tracking subsystem. + The accounting is thus performed at the expense of some significant + overhead. + + For now this is only useful if you are working on the full + dynticks subsystem development. + + If unsure, say N. + config IRQ_TIME_ACCOUNTING bool "Fine granularity task level IRQ time accounting" depends on HAVE_IRQ_TIME_ACCOUNTING @@ -393,7 +383,7 @@ config BSD_PROCESS_ACCT_V3 at <http://www.gnu.org/software/acct/>. config TASKSTATS - bool "Export task/process statistics through netlink (EXPERIMENTAL)" + bool "Export task/process statistics through netlink" depends on NET default n help @@ -406,7 +396,7 @@ config TASKSTATS Say N if unsure. config TASK_DELAY_ACCT - bool "Enable per-task delay accounting (EXPERIMENTAL)" + bool "Enable per-task delay accounting" depends on TASKSTATS help Collect information on time spent by a task waiting for system @@ -417,7 +407,7 @@ config TASK_DELAY_ACCT Say N if unsure. config TASK_XACCT - bool "Enable extended accounting over taskstats (EXPERIMENTAL)" + bool "Enable extended accounting over taskstats" depends on TASKSTATS help Collect extended task accounting data and send the data @@ -426,7 +416,7 @@ config TASK_XACCT Say N if unsure. config TASK_IO_ACCOUNTING - bool "Enable per-task storage I/O accounting (EXPERIMENTAL)" + bool "Enable per-task storage I/O accounting" depends on TASK_XACCT help Collect information on the number of bytes of storage I/O which this @@ -453,7 +443,7 @@ config TREE_RCU config TREE_PREEMPT_RCU bool "Preemptible tree-based hierarchical RCU" - depends on PREEMPT && SMP + depends on PREEMPT help This option selects the RCU implementation that is designed for very large SMP systems with hundreds or @@ -461,6 +451,8 @@ config TREE_PREEMPT_RCU is also required. It also scales down nicely to smaller systems. + Select this option if you are unsure. + config TINY_RCU bool "UP-only small-memory-footprint RCU" depends on !PREEMPT && !SMP @@ -486,6 +478,14 @@ config PREEMPT_RCU This option enables preemptible-RCU code that is common between the TREE_PREEMPT_RCU and TINY_PREEMPT_RCU implementations. +config RCU_STALL_COMMON + def_bool ( TREE_RCU || TREE_PREEMPT_RCU || RCU_TRACE ) + help + This option enables RCU CPU stall code that is common between + the TINY and TREE variants of RCU. The purpose is to allow + the tiny variants to disable RCU CPU stall warnings, while + making these warnings mandatory for the tree variants. + config CONTEXT_TRACKING bool @@ -880,8 +880,8 @@ config MEMCG_SWAP_ENABLED select this option (if, for some reason, they need to disable it then swapaccount=0 does the trick). config MEMCG_KMEM - bool "Memory Resource Controller Kernel Memory accounting (EXPERIMENTAL)" - depends on MEMCG && EXPERIMENTAL + bool "Memory Resource Controller Kernel Memory accounting" + depends on MEMCG depends on SLUB || SLAB help The Kernel Memory extension for Memory Resource Controller can limit @@ -893,7 +893,7 @@ config MEMCG_KMEM config CGROUP_HUGETLB bool "HugeTLB Resource Controller for Control Groups" - depends on RESOURCE_COUNTERS && HUGETLB_PAGE && EXPERIMENTAL + depends on RESOURCE_COUNTERS && HUGETLB_PAGE default n help Provides a cgroup Resource Controller for HugeTLB pages. @@ -932,7 +932,6 @@ config FAIR_GROUP_SCHED config CFS_BANDWIDTH bool "CPU bandwidth provisioning for FAIR_GROUP_SCHED" - depends on EXPERIMENTAL depends on FAIR_GROUP_SCHED default n help @@ -944,7 +943,6 @@ config CFS_BANDWIDTH config RT_GROUP_SCHED bool "Group scheduling for SCHED_RR/FIFO" - depends on EXPERIMENTAL depends on CGROUP_SCHED default n help @@ -1026,8 +1024,7 @@ config IPC_NS different IPC objects in different namespaces. config USER_NS - bool "User namespace (EXPERIMENTAL)" - depends on EXPERIMENTAL + bool "User namespace" depends on UIDGID_CONVERTED select UIDGID_STRICT_TYPE_CHECKS @@ -1035,6 +1032,13 @@ config USER_NS help This allows containers, i.e. vservers, to use user namespaces to provide different user info for different servers. + + When user namespaces are enabled in the kernel it is + recommended that the MEMCG and MEMCG_KMEM options also be + enabled and that user-space use the memory control groups to + limit the amount of memory a memory unprivileged users can + use. + If unsure, say N. config PID_NS @@ -1063,20 +1067,7 @@ config UIDGID_CONVERTED bool default y - # Networking - depends on NET_9P = n - # Filesystems - depends on 9P_FS = n - depends on AFS_FS = n - depends on CEPH_FS = n - depends on CIFS = n - depends on CODA_FS = n - depends on GFS2_FS = n - depends on NCP_FS = n - depends on NFSD = n - depends on NFS_FS = n - depends on OCFS2_FS = n depends on XFS_FS = n config UIDGID_STRICT_TYPE_CHECKS @@ -1232,6 +1223,13 @@ config SYSCTL_EXCEPTION_TRACE help Enable support for /proc/sys/debug/exception-trace. +config SYSCTL_ARCH_UNALIGN_NO_WARN + bool + help + Enable support for /proc/sys/kernel/ignore-unaligned-usertrap + Allows arch to define/use @no_unaligned_warning to possibly warn + about unaligned access emulation going on under the hood. + config SYSCTL_ARCH_UNALIGN_ALLOW bool help @@ -1271,6 +1269,7 @@ config HOTPLUG config PRINTK default y bool "Enable support for printk" if EXPERT + select IRQ_WORK help This option enables normal printk support. Removing it eliminates most of the message strings from the kernel image @@ -1616,7 +1615,7 @@ config MODULE_UNLOAD config MODULE_FORCE_UNLOAD bool "Forced module unloading" - depends on MODULE_UNLOAD && EXPERIMENTAL + depends on MODULE_UNLOAD help This option allows you to force a module to unload, even if the kernel believes it is unsafe: the kernel will remove the module @@ -1673,6 +1672,17 @@ config MODULE_SIG_FORCE Reject unsigned modules or signed modules for which we don't have a key. Without this, such modules will simply taint the kernel. +config MODULE_SIG_ALL + bool "Automatically sign all modules" + default y + depends on MODULE_SIG + help + Sign all modules during make modules_install. Without this option, + modules must be signed manually, using the scripts/sign-file tool. + +comment "Do not forget to sign required modules with scripts/sign-file" + depends on MODULE_SIG_FORCE && !MODULE_SIG_ALL + choice prompt "Which hash algorithm should modules be signed with?" depends on MODULE_SIG @@ -1705,6 +1715,15 @@ config MODULE_SIG_SHA512 endchoice +config MODULE_SIG_HASH + string + depends on MODULE_SIG + default "sha1" if MODULE_SIG_SHA1 + default "sha224" if MODULE_SIG_SHA224 + default "sha256" if MODULE_SIG_SHA256 + default "sha384" if MODULE_SIG_SHA384 + default "sha512" if MODULE_SIG_SHA512 + endif # MODULES config INIT_ALL_POSSIBLE |