summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/net/cfg80211.h81
-rw-r--r--include/net/mac80211.h18
-rw-r--r--include/uapi/linux/nl80211.h14
-rw-r--r--include/uapi/linux/wireless.h63
4 files changed, 115 insertions, 61 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 63921672bed0..7bbb00d8b2cd 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -2367,19 +2367,23 @@ struct cfg80211_qos_map {
* (invoked with the wireless_dev mutex held)
*
* @connect: Connect to the ESS with the specified parameters. When connected,
- * call cfg80211_connect_result() with status code %WLAN_STATUS_SUCCESS.
- * If the connection fails for some reason, call cfg80211_connect_result()
- * with the status from the AP. The driver is allowed to roam to other
- * BSSes within the ESS when the other BSS matches the connect parameters.
- * When such roaming is initiated by the driver, the driver is expected to
- * verify that the target matches the configured security parameters and
- * to use Reassociation Request frame instead of Association Request frame.
- * The connect function can also be used to request the driver to perform
- * a specific roam when connected to an ESS. In that case, the prev_bssid
+ * call cfg80211_connect_result()/cfg80211_connect_bss() with status code
+ * %WLAN_STATUS_SUCCESS. If the connection fails for some reason, call
+ * cfg80211_connect_result()/cfg80211_connect_bss() with the status code
+ * from the AP or cfg80211_connect_timeout() if no frame with status code
+ * was received.
+ * The driver is allowed to roam to other BSSes within the ESS when the
+ * other BSS matches the connect parameters. When such roaming is initiated
+ * by the driver, the driver is expected to verify that the target matches
+ * the configured security parameters and to use Reassociation Request
+ * frame instead of Association Request frame.
+ * The connect function can also be used to request the driver to perform a
+ * specific roam when connected to an ESS. In that case, the prev_bssid
* parameter is set to the BSSID of the currently associated BSS as an
- * indication of requesting reassociation. In both the driver-initiated and
- * new connect() call initiated roaming cases, the result of roaming is
- * indicated with a call to cfg80211_roamed() or cfg80211_roamed_bss().
+ * indication of requesting reassociation.
+ * In both the driver-initiated and new connect() call initiated roaming
+ * cases, the result of roaming is indicated with a call to
+ * cfg80211_roamed() or cfg80211_roamed_bss().
* (invoked with the wireless_dev mutex held)
* @disconnect: Disconnect from the BSS/ESS.
* (invoked with the wireless_dev mutex held)
@@ -3080,6 +3084,24 @@ struct wiphy_vendor_command {
};
/**
+ * struct wiphy_iftype_ext_capab - extended capabilities per interface type
+ * @iftype: interface type
+ * @extended_capabilities: extended capabilities supported by the driver,
+ * additional capabilities might be supported by userspace; these are the
+ * 802.11 extended capabilities ("Extended Capabilities element") and are
+ * in the same format as in the information element. See IEEE Std
+ * 802.11-2012 8.4.2.29 for the defined fields.
+ * @extended_capabilities_mask: mask of the valid values
+ * @extended_capabilities_len: length of the extended capabilities
+ */
+struct wiphy_iftype_ext_capab {
+ enum nl80211_iftype iftype;
+ const u8 *extended_capabilities;
+ const u8 *extended_capabilities_mask;
+ u8 extended_capabilities_len;
+};
+
+/**
* struct wiphy - wireless hardware description
* @reg_notifier: the driver's regulatory notification callback,
* note that if your driver uses wiphy_apply_custom_regulatory()
@@ -3199,9 +3221,14 @@ struct wiphy_vendor_command {
* additional capabilities might be supported by userspace; these are
* the 802.11 extended capabilities ("Extended Capabilities element")
* and are in the same format as in the information element. See
- * 802.11-2012 8.4.2.29 for the defined fields.
+ * 802.11-2012 8.4.2.29 for the defined fields. These are the default
+ * extended capabilities to be used if the capabilities are not specified
+ * for a specific interface type in iftype_ext_capab.
* @extended_capabilities_mask: mask of the valid values
* @extended_capabilities_len: length of the extended capabilities
+ * @iftype_ext_capab: array of extended capabilities per interface type
+ * @num_iftype_ext_capab: number of interface types for which extended
+ * capabilities are specified separately.
* @coalesce: packet coalescing support information
*
* @vendor_commands: array of vendor commands supported by the hardware
@@ -3301,6 +3328,9 @@ struct wiphy {
const u8 *extended_capabilities, *extended_capabilities_mask;
u8 extended_capabilities_len;
+ const struct wiphy_iftype_ext_capab *iftype_ext_capab;
+ unsigned int num_iftype_ext_capab;
+
/* If multiple wiphys are registered and you're handed e.g.
* a regular netdev with assigned ieee80211_ptr, you won't
* know whether it points to a wiphy your driver has registered
@@ -4680,7 +4710,7 @@ static inline void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp)
void cfg80211_connect_bss(struct net_device *dev, const u8 *bssid,
struct cfg80211_bss *bss, const u8 *req_ie,
size_t req_ie_len, const u8 *resp_ie,
- size_t resp_ie_len, u16 status, gfp_t gfp);
+ size_t resp_ie_len, int status, gfp_t gfp);
/**
* cfg80211_connect_result - notify cfg80211 of connection result
@@ -4710,6 +4740,29 @@ cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
}
/**
+ * cfg80211_connect_timeout - notify cfg80211 of connection timeout
+ *
+ * @dev: network device
+ * @bssid: the BSSID of the AP
+ * @req_ie: association request IEs (maybe be %NULL)
+ * @req_ie_len: association request IEs length
+ * @gfp: allocation flags
+ *
+ * It should be called by the underlying driver whenever connect() has failed
+ * in a sequence where no explicit authentication/association rejection was
+ * received from the AP. This could happen, e.g., due to not being able to send
+ * out the Authentication or Association Request frame or timing out while
+ * waiting for the response.
+ */
+static inline void
+cfg80211_connect_timeout(struct net_device *dev, const u8 *bssid,
+ const u8 *req_ie, size_t req_ie_len, gfp_t gfp)
+{
+ cfg80211_connect_bss(dev, bssid, NULL, req_ie, req_ie_len, NULL, 0, -1,
+ gfp);
+}
+
+/**
* cfg80211_roamed - notify cfg80211 of roaming
*
* @dev: network device
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index be30b0549b88..a52009ffc19f 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -21,6 +21,7 @@
#include <linux/skbuff.h>
#include <linux/ieee80211.h>
#include <net/cfg80211.h>
+#include <net/codel.h>
#include <asm/unaligned.h>
/**
@@ -895,7 +896,18 @@ struct ieee80211_tx_info {
unsigned long jiffies;
};
/* NB: vif can be NULL for injected frames */
- struct ieee80211_vif *vif;
+ union {
+ /* NB: vif can be NULL for injected frames */
+ struct ieee80211_vif *vif;
+
+ /* When packets are enqueued on txq it's easy
+ * to re-construct the vif pointer. There's no
+ * more space in tx_info so it can be used to
+ * store the necessary enqueue time for packet
+ * sojourn time computation.
+ */
+ codel_time_t enqueue_time;
+ };
struct ieee80211_key_conf *hw_key;
u32 flags;
/* 4 bytes free */
@@ -2147,9 +2159,6 @@ enum ieee80211_hw_flags {
* @n_cipher_schemes: a size of an array of cipher schemes definitions.
* @cipher_schemes: a pointer to an array of cipher scheme definitions
* supported by HW.
- *
- * @txq_ac_max_pending: maximum number of frames per AC pending in all txq
- * entries for a vif.
*/
struct ieee80211_hw {
struct ieee80211_conf conf;
@@ -2180,7 +2189,6 @@ struct ieee80211_hw {
u8 uapsd_max_sp_len;
u8 n_cipher_schemes;
const struct ieee80211_cipher_scheme *cipher_schemes;
- int txq_ac_max_pending;
};
static inline bool _ieee80211_hw_check(struct ieee80211_hw *hw,
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index e23d78685a01..53c8278827a0 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -493,7 +493,12 @@
* This attribute is ignored if driver does not support roam scan.
* It is also sent as an event, with the BSSID and response IEs when the
* connection is established or failed to be established. This can be
- * determined by the STATUS_CODE attribute.
+ * determined by the %NL80211_ATTR_STATUS_CODE attribute (0 = success,
+ * non-zero = failure). If %NL80211_ATTR_TIMED_OUT is included in the
+ * event, the connection attempt failed due to not being able to initiate
+ * authentication/association or not receiving a response from the AP.
+ * Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as
+ * well to remain backwards compatible.
* @NL80211_CMD_ROAM: request that the card roam (currently not implemented),
* sent as an event when the card/driver roamed by itself.
* @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
@@ -1819,6 +1824,11 @@ enum nl80211_commands {
*
* @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment
*
+ * @NL80211_ATTR_IFTYPE_EXT_CAPA: Nested attribute of the following attributes:
+ * %NL80211_ATTR_IFTYPE, %NL80211_ATTR_EXT_CAPA,
+ * %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities per
+ * interface type.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2201,6 +2211,8 @@ enum nl80211_attrs {
NL80211_ATTR_PAD,
+ NL80211_ATTR_IFTYPE_EXT_CAPA,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
diff --git a/include/uapi/linux/wireless.h b/include/uapi/linux/wireless.h
index c1592e3e4036..d9ecd7c6d691 100644
--- a/include/uapi/linux/wireless.h
+++ b/include/uapi/linux/wireless.h
@@ -670,8 +670,7 @@
/*
* Generic format for most parameters that fit in an int
*/
-struct iw_param
-{
+struct iw_param {
__s32 value; /* The value of the parameter itself */
__u8 fixed; /* Hardware should not use auto select */
__u8 disabled; /* Disable the feature */
@@ -682,8 +681,7 @@ struct iw_param
* For all data larger than 16 octets, we need to use a
* pointer to memory allocated in user space.
*/
-struct iw_point
-{
+struct iw_point {
void __user *pointer; /* Pointer to the data (in user space) */
__u16 length; /* number of fields or size in bytes */
__u16 flags; /* Optional params */
@@ -698,8 +696,7 @@ struct iw_point
* of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')...
* The power of 10 is in 'e', the result of the division is in 'm'.
*/
-struct iw_freq
-{
+struct iw_freq {
__s32 m; /* Mantissa */
__s16 e; /* Exponent */
__u8 i; /* List index (when in range struct) */
@@ -709,8 +706,7 @@ struct iw_freq
/*
* Quality of the link
*/
-struct iw_quality
-{
+struct iw_quality {
__u8 qual; /* link quality (%retries, SNR,
%missed beacons or better...) */
__u8 level; /* signal level (dBm) */
@@ -725,8 +721,7 @@ struct iw_quality
* is already pretty exhaustive, and you should use that first.
* This is only additional stats...
*/
-struct iw_discarded
-{
+struct iw_discarded {
__u32 nwid; /* Rx : Wrong nwid/essid */
__u32 code; /* Rx : Unable to code/decode (WEP) */
__u32 fragment; /* Rx : Can't perform MAC reassembly */
@@ -738,16 +733,14 @@ struct iw_discarded
* Packet/Time period missed in the wireless adapter due to
* "wireless" specific problems...
*/
-struct iw_missed
-{
+struct iw_missed {
__u32 beacon; /* Missed beacons/superframe */
};
/*
* Quality range (for spy threshold)
*/
-struct iw_thrspy
-{
+struct iw_thrspy {
struct sockaddr addr; /* Source address (hw/mac) */
struct iw_quality qual; /* Quality of the link */
struct iw_quality low; /* Low threshold */
@@ -765,8 +758,7 @@ struct iw_thrspy
* Especially, scan results are required to include an entry for the
* current BSS if the driver is in Managed mode and associated with an AP.
*/
-struct iw_scan_req
-{
+struct iw_scan_req {
__u8 scan_type; /* IW_SCAN_TYPE_{ACTIVE,PASSIVE} */
__u8 essid_len;
__u8 num_channels; /* num entries in channel_list;
@@ -827,8 +819,7 @@ struct iw_scan_req
* RX_SEQ_VALID for SIOCGIWENCODEEXT are optional, but can be useful for
* debugging/testing.
*/
-struct iw_encode_ext
-{
+struct iw_encode_ext {
__u32 ext_flags; /* IW_ENCODE_EXT_* */
__u8 tx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
__u8 rx_seq[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
@@ -841,8 +832,7 @@ struct iw_encode_ext
};
/* SIOCSIWMLME data */
-struct iw_mlme
-{
+struct iw_mlme {
__u16 cmd; /* IW_MLME_* */
__u16 reason_code;
struct sockaddr addr;
@@ -855,16 +845,14 @@ struct iw_mlme
#define IW_PMKID_LEN 16
-struct iw_pmksa
-{
+struct iw_pmksa {
__u32 cmd; /* IW_PMKSA_* */
struct sockaddr bssid;
__u8 pmkid[IW_PMKID_LEN];
};
/* IWEVMICHAELMICFAILURE data */
-struct iw_michaelmicfailure
-{
+struct iw_michaelmicfailure {
__u32 flags;
struct sockaddr src_addr;
__u8 tsc[IW_ENCODE_SEQ_MAX_SIZE]; /* LSB first */
@@ -872,8 +860,7 @@ struct iw_michaelmicfailure
/* IWEVPMKIDCAND data */
#define IW_PMKID_CAND_PREAUTH 0x00000001 /* RNS pre-authentication enabled */
-struct iw_pmkid_cand
-{
+struct iw_pmkid_cand {
__u32 flags; /* IW_PMKID_CAND_* */
__u32 index; /* the smaller the index, the higher the
* priority */
@@ -884,8 +871,7 @@ struct iw_pmkid_cand
/*
* Wireless statistics (used for /proc/net/wireless)
*/
-struct iw_statistics
-{
+struct iw_statistics {
__u16 status; /* Status
* - device dependent for now */
@@ -897,7 +883,7 @@ struct iw_statistics
/* ------------------------ IOCTL REQUEST ------------------------ */
/*
- * This structure defines the payload of an ioctl, and is used
+ * This structure defines the payload of an ioctl, and is used
* below.
*
* Note that this structure should fit on the memory footprint
@@ -906,8 +892,7 @@ struct iw_statistics
* You should check this when increasing the structures defined
* above in this file...
*/
-union iwreq_data
-{
+union iwreq_data {
/* Config - generic */
char name[IFNAMSIZ];
/* Name : used to verify the presence of wireless extensions.
@@ -944,15 +929,14 @@ union iwreq_data
* convenience...
* Do I need to remind you about structure size (32 octets) ?
*/
-struct iwreq
-{
+struct iwreq {
union
{
char ifrn_name[IFNAMSIZ]; /* if name, e.g. "eth0" */
} ifr_ifrn;
/* Data part (defined just above) */
- union iwreq_data u;
+ union iwreq_data u;
};
/* -------------------------- IOCTL DATA -------------------------- */
@@ -965,8 +949,7 @@ struct iwreq
* Range of parameters
*/
-struct iw_range
-{
+struct iw_range {
/* Informative stuff (to choose between different interface) */
__u32 throughput; /* To give an idea... */
/* In theory this value should be the maximum benchmarked
@@ -1069,9 +1052,8 @@ struct iw_range
/*
* Private ioctl interface information
*/
-
-struct iw_priv_args
-{
+
+struct iw_priv_args {
__u32 cmd; /* Number of the ioctl to issue */
__u16 set_args; /* Type and number of args */
__u16 get_args; /* Type and number of args */
@@ -1088,8 +1070,7 @@ struct iw_priv_args
/*
* A Wireless Event. Contains basically the same data as the ioctl...
*/
-struct iw_event
-{
+struct iw_event {
__u16 len; /* Real length of this stuff */
__u16 cmd; /* Wireless IOCTL */
union iwreq_data u; /* IOCTL fixed payload */