diff options
Diffstat (limited to 'include')
187 files changed, 2107 insertions, 18405 deletions
diff --git a/include/asm-mips/barrier.h b/include/asm-mips/barrier.h index 9d8cfbb5e796..8e9ac313ca3b 100644 --- a/include/asm-mips/barrier.h +++ b/include/asm-mips/barrier.h @@ -92,11 +92,25 @@ #define fast_wmb() __sync() #define fast_rmb() __sync() #define fast_mb() __sync() +#ifdef CONFIG_SGI_IP28 +#define fast_iob() \ + __asm__ __volatile__( \ + ".set push\n\t" \ + ".set noreorder\n\t" \ + "lw $0,%0\n\t" \ + "sync\n\t" \ + "lw $0,%0\n\t" \ + ".set pop" \ + : /* no output */ \ + : "m" (*(int *)CKSEG1ADDR(0x1fa00004)) \ + : "memory") +#else #define fast_iob() \ do { \ __sync(); \ __fast_iob(); \ } while (0) +#endif #ifdef CONFIG_CPU_HAS_WB diff --git a/include/asm-mips/bitops.h b/include/asm-mips/bitops.h index 642724734eba..9a7274ba6a0b 100644 --- a/include/asm-mips/bitops.h +++ b/include/asm-mips/bitops.h @@ -82,7 +82,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr) "2: b 1b \n" " .previous \n" : "=&r" (temp), "=m" (*m) - : "ir" (bit), "m" (*m), "r" (~0)); + : "i" (bit), "m" (*m), "r" (~0)); #endif /* CONFIG_CPU_MIPSR2 */ } else if (cpu_has_llsc) { __asm__ __volatile__( @@ -147,7 +147,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr) "2: b 1b \n" " .previous \n" : "=&r" (temp), "=m" (*m) - : "ir" (bit), "m" (*m)); + : "i" (bit), "m" (*m)); #endif /* CONFIG_CPU_MIPSR2 */ } else if (cpu_has_llsc) { __asm__ __volatile__( @@ -428,7 +428,7 @@ static inline int test_and_clear_bit(unsigned long nr, "2: b 1b \n" " .previous \n" : "=&r" (temp), "=m" (*m), "=&r" (res) - : "ri" (bit), "m" (*m) + : "i" (bit), "m" (*m) : "memory"); #endif } else if (cpu_has_llsc) { diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h index e031bdff9920..d39e143b4a3c 100644 --- a/include/asm-mips/bootinfo.h +++ b/include/asm-mips/bootinfo.h @@ -26,13 +26,6 @@ #define MACH_UNKNOWN 0 /* whatever... */ /* - * Valid machtype values for group JAZZ - */ -#define MACH_ACER_PICA_61 0 /* Acer PICA-61 (PICA1) */ -#define MACH_MIPS_MAGNUM_4000 1 /* Mips Magnum 4000 "RC4030" */ -#define MACH_OLIVETTI_M700 2 /* Olivetti M700-10 (-15 ??) */ - -/* * Valid machtype for group DEC */ #define MACH_DSUNKNOWN 0 @@ -48,42 +41,6 @@ #define MACH_DS5900 10 /* DECsystem 5900 */ /* - * Valid machtype for group SNI_RM - */ -#define MACH_SNI_RM200_PCI 0 /* RM200/RM300/RM400 PCI series */ - -/* - * Valid machtype for group SGI - */ -#define MACH_SGI_IP22 0 /* Indy, Indigo2, Challenge S */ -#define MACH_SGI_IP27 1 /* Origin 200, Origin 2000, Onyx 2 */ -#define MACH_SGI_IP28 2 /* Indigo2 Impact */ -#define MACH_SGI_IP32 3 /* O2 */ -#define MACH_SGI_IP30 4 /* Octane, Octane2 */ - -/* - * Valid machtypes for group Toshiba - */ -#define MACH_PALLAS 0 -#define MACH_TOPAS 1 -#define MACH_JMR 2 -#define MACH_TOSHIBA_JMR3927 3 /* JMR-TX3927 CPU/IO board */ -#define MACH_TOSHIBA_RBTX4927 4 -#define MACH_TOSHIBA_RBTX4937 5 -#define MACH_TOSHIBA_RBTX4938 6 - -/* - * Valid machtype for group LASAT - */ -#define MACH_LASAT_100 0 /* Masquerade II/SP100/SP50/SP25 */ -#define MACH_LASAT_200 1 /* Masquerade PRO/SP200 */ - -/* - * Valid machtype for group NEC EMMA2RH - */ -#define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */ - -/* * Valid machtype for group PMC-MSP */ #define MACH_MSP4200_EVAL 0 /* PMC-Sierra MSP4200 Evaluation */ diff --git a/include/asm-mips/cpu.h b/include/asm-mips/cpu.h index 1c35cac6f35b..229a786101d9 100644 --- a/include/asm-mips/cpu.h +++ b/include/asm-mips/cpu.h @@ -66,8 +66,10 @@ #define PRID_IMP_RM7000 0x2700 #define PRID_IMP_NEVADA 0x2800 /* RM5260 ??? */ #define PRID_IMP_RM9000 0x3400 +#define PRID_IMP_LOONGSON1 0x4200 #define PRID_IMP_R5432 0x5400 #define PRID_IMP_R5500 0x5500 +#define PRID_IMP_LOONGSON2 0x6300 #define PRID_IMP_UNKNOWN 0xff00 @@ -90,8 +92,6 @@ #define PRID_IMP_24KE 0x9600 #define PRID_IMP_74K 0x9700 #define PRID_IMP_1004K 0x9900 -#define PRID_IMP_LOONGSON1 0x4200 -#define PRID_IMP_LOONGSON2 0x6300 /* * These are the PRID's for when 23:16 == PRID_COMP_SIBYTE diff --git a/include/asm-mips/dec/kn05.h b/include/asm-mips/dec/kn05.h index 15fe8f881e60..56d22dc8803a 100644 --- a/include/asm-mips/dec/kn05.h +++ b/include/asm-mips/dec/kn05.h @@ -6,7 +6,7 @@ * KN04-CA) and DECsystem 5900/260 (KN05) R4k CPU card MB ASIC * definitions. * - * Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki + * Copyright (C) 2002, 2003, 2005, 2008 Maciej W. Rozycki * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -54,11 +54,11 @@ */ #define KN4K_MB_INT_TC (1<<0) /* TURBOchannel? */ #define KN4K_MB_INT_RTC (1<<1) /* RTC? */ -#define KN4K_MB_INT_MT (1<<3) /* ??? */ +#define KN4K_MB_INT_MT (1<<3) /* I/O ASIC cascade */ /* * Bits for the MB control & status register. - * Set to 0x00bf8001 on my system by the ROM. + * Set to 0x00bf8001 for KN05 and to 0x003f8000 for KN04 by the firmware. */ #define KN4K_MB_CSR_PF (1<<0) /* PreFetching enable? */ #define KN4K_MB_CSR_F (1<<1) /* ??? */ @@ -69,7 +69,8 @@ #define KN4K_MB_CSR_IM (1<<13) /* ??? */ #define KN4K_MB_CSR_NC (1<<14) /* ??? */ #define KN4K_MB_CSR_EE (1<<15) /* (bus) Exception Enable? */ -#define KN4K_MB_CSR_MSK (0x1f<<16) /* ??? */ +#define KN4K_MB_CSR_MSK (0x1f<<16) /* CPU Int[4:0] mask */ #define KN4K_MB_CSR_FW (1<<21) /* ??? */ +#define KN4K_MB_CSR_W (1<<31) /* ??? */ #endif /* __ASM_MIPS_DEC_KN05_H */ diff --git a/include/asm-mips/inventory.h b/include/asm-mips/inventory.h deleted file mode 100644 index cc88aed23f0f..000000000000 --- a/include/asm-mips/inventory.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Miguel de Icaza - */ -#ifndef __ASM_INVENTORY_H -#define __ASM_INVENTORY_H - -#include <linux/compiler.h> - -typedef struct inventory_s { - struct inventory_s *inv_next; - int inv_class; - int inv_type; - int inv_controller; - int inv_unit; - int inv_state; -} inventory_t; - -extern int inventory_items; - -extern void add_to_inventory(int class, int type, int controller, int unit, int state); -extern int dump_inventory_to_user(void __user *userbuf, int size); -extern int __init init_inventory(void); - -#endif /* __ASM_INVENTORY_H */ diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h index f18d2816cbec..501a40b9f18d 100644 --- a/include/asm-mips/io.h +++ b/include/asm-mips/io.h @@ -161,13 +161,6 @@ static inline void * isa_bus_to_virt(unsigned long address) #define bus_to_virt phys_to_virt /* - * isa_slot_offset is the address where E(ISA) busaddress 0 is mapped - * for the processor. This implies the assumption that there is only - * one of these busses. - */ -extern unsigned long isa_slot_offset; - -/* * Change "struct page" to physical address. */ #define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT) @@ -528,16 +521,6 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int } /* - * ISA space is 'always mapped' on currently supported MIPS systems, no need - * to explicitly ioremap() it. The fact that the ISA IO space is mapped - * to PAGE_OFFSET is pure coincidence - it does not mean ISA values - * are physical addresses. The following constant pointer can be - * used as the IO-area pointer (it can be iounmapped as well, so the - * analogy with PCI is quite large): - */ -#define __ISA_IO_base ((char *)(isa_slot_offset)) - -/* * The caches on some architectures aren't dma-coherent and have need to * handle this in software. There are three types of operations that * can be applied to dma buffers. diff --git a/include/asm-mips/lasat/lasat.h b/include/asm-mips/lasat/lasat.h index ea04d9262edc..caeba1e302a2 100644 --- a/include/asm-mips/lasat/lasat.h +++ b/include/asm-mips/lasat/lasat.h @@ -240,6 +240,8 @@ static inline void lasat_ndelay(unsigned int ns) __delay(ns / lasat_ndelay_divider); } +#define IS_LASAT_200() (current_cpu_data.cputype == CPU_R5000) + #endif /* !defined (_LANGUAGE_ASSEMBLY) */ #define LASAT_SERVICEMODE_MAGIC_1 0xdeadbeef diff --git a/include/asm-mips/mach-atlas/mc146818rtc.h b/include/asm-mips/mach-atlas/mc146818rtc.h deleted file mode 100644 index 51d337e1bbd1..000000000000 --- a/include/asm-mips/mach-atlas/mc146818rtc.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Copyright (C) 1999, 2000, 2005 MIPS Technologies, Inc. - * All rights reserved. - * Authors: Carsten Langgaard <carstenl@mips.com> - * Maciej W. Rozycki <macro@mips.com> - * Copyright (C) 2003, 05 Ralf Baechle (ralf@linux-mips.org) - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#ifndef __ASM_MACH_ATLAS_MC146818RTC_H -#define __ASM_MACH_ATLAS_MC146818RTC_H - -#include <linux/types.h> - -#include <asm/addrspace.h> - -#include <asm/mips-boards/atlas.h> -#include <asm/mips-boards/atlasint.h> - -#define ARCH_RTC_LOCATION - -#define RTC_PORT(x) (ATLAS_RTC_ADR_REG + (x) * 8) -#define RTC_IO_EXTENT 0x100 -#define RTC_IOMAPPED 0 -#define RTC_IRQ ATLAS_INT_RTC - -static inline unsigned char CMOS_READ(unsigned long addr) -{ - volatile u32 *ireg = (void *)CKSEG1ADDR(RTC_PORT(0)); - volatile u32 *dreg = (void *)CKSEG1ADDR(RTC_PORT(1)); - - *ireg = addr; - return *dreg; -} - -static inline void CMOS_WRITE(unsigned char data, unsigned long addr) -{ - volatile u32 *ireg = (void *)CKSEG1ADDR(RTC_PORT(0)); - volatile u32 *dreg = (void *)CKSEG1ADDR(RTC_PORT(1)); - - *ireg = addr; - *dreg = data; -} - -#define RTC_ALWAYS_BCD 0 - -#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1900) - -#endif /* __ASM_MACH_ATLAS_MC146818RTC_H */ diff --git a/include/asm-mips/mach-db1x00/db1x00.h b/include/asm-mips/mach-db1x00/db1x00.h index 612ae90dbcb8..1a515b8c870f 100644 --- a/include/asm-mips/mach-db1x00/db1x00.h +++ b/include/asm-mips/mach-db1x00/db1x00.h @@ -146,51 +146,6 @@ typedef volatile struct ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) /* - * SD controller macros - */ - -/* Detect card. */ -#define mmc_card_inserted(_n_, _res_) \ - do { \ - BCSR * const bcsr = (BCSR *)0xAE000000; \ - unsigned long mmc_wp, board_specific; \ - if ((_n_)) { \ - mmc_wp = BCSR_BOARD_SD1_WP; \ - } else { \ - mmc_wp = BCSR_BOARD_SD0_WP; \ - } \ - board_specific = au_readl((unsigned long)(&bcsr->specific)); \ - if (!(board_specific & mmc_wp)) {/* low means card present */ \ - *(int *)(_res_) = 1; \ - } else { \ - *(int *)(_res_) = 0; \ - } \ - } while (0) - -/* - * Apply power to card slot(s). - */ -#define mmc_power_on(_n_) \ - do { \ - BCSR * const bcsr = (BCSR *)0xAE000000; \ - unsigned long mmc_pwr, mmc_wp, board_specific; \ - if ((_n_)) { \ - mmc_pwr = BCSR_BOARD_SD1_PWR; \ - mmc_wp = BCSR_BOARD_SD1_WP; \ - } else { \ - mmc_pwr = BCSR_BOARD_SD0_PWR; \ - mmc_wp = BCSR_BOARD_SD0_WP; \ - } \ - board_specific = au_readl((unsigned long)(&bcsr->specific)); \ - if (!(board_specific & mmc_wp)) {/* low means card present */ \ - board_specific |= mmc_pwr; \ - au_writel(board_specific, (int)(&bcsr->specific)); \ - au_sync(); \ - } \ - } while (0) - - -/* * NAND defines * * Timing values as described in databook, * ns value stripped of the diff --git a/include/asm-mips/mach-mips/cpu-feature-overrides.h b/include/asm-mips/mach-malta/cpu-feature-overrides.h index 7f3e3f9bd23a..7f3e3f9bd23a 100644 --- a/include/asm-mips/mach-mips/cpu-feature-overrides.h +++ b/include/asm-mips/mach-malta/cpu-feature-overrides.h diff --git a/include/asm-mips/mach-mips/irq.h b/include/asm-mips/mach-malta/irq.h index 9b9da26683c2..9b9da26683c2 100644 --- a/include/asm-mips/mach-mips/irq.h +++ b/include/asm-mips/mach-malta/irq.h diff --git a/include/asm-mips/mach-mips/kernel-entry-init.h b/include/asm-mips/mach-malta/kernel-entry-init.h index 0b793e7bf67e..0b793e7bf67e 100644 --- a/include/asm-mips/mach-mips/kernel-entry-init.h +++ b/include/asm-mips/mach-malta/kernel-entry-init.h diff --git a/include/asm-mips/mach-mips/mach-gt64120.h b/include/asm-mips/mach-malta/mach-gt64120.h index 0f863148f3b6..0f863148f3b6 100644 --- a/include/asm-mips/mach-mips/mach-gt64120.h +++ b/include/asm-mips/mach-malta/mach-gt64120.h diff --git a/include/asm-mips/mach-mips/mc146818rtc.h b/include/asm-mips/mach-malta/mc146818rtc.h index ea612f37f614..ea612f37f614 100644 --- a/include/asm-mips/mach-mips/mc146818rtc.h +++ b/include/asm-mips/mach-malta/mc146818rtc.h diff --git a/include/asm-mips/mach-mips/war.h b/include/asm-mips/mach-malta/war.h index 7c6931d5f45f..7c6931d5f45f 100644 --- a/include/asm-mips/mach-mips/war.h +++ b/include/asm-mips/mach-malta/war.h diff --git a/include/asm-mips/mach-jmr3927/ioremap.h b/include/asm-mips/mach-tx39xx/ioremap.h index 29989ff10d66..93c6c04ffda3 100644 --- a/include/asm-mips/mach-jmr3927/ioremap.h +++ b/include/asm-mips/mach-tx39xx/ioremap.h @@ -1,13 +1,13 @@ /* - * include/asm-mips/mach-jmr3927/ioremap.h + * include/asm-mips/mach-tx39xx/ioremap.h * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ -#ifndef __ASM_MACH_JMR3927_IOREMAP_H -#define __ASM_MACH_JMR3927_IOREMAP_H +#ifndef __ASM_MACH_TX39XX_IOREMAP_H +#define __ASM_MACH_TX39XX_IOREMAP_H #include <linux/types.h> @@ -35,4 +35,4 @@ static inline int plat_iounmap(const volatile void __iomem *addr) return (unsigned long)addr >= TXX9_DIRECTMAP_BASE; } -#endif /* __ASM_MACH_JMR3927_IOREMAP_H */ +#endif /* __ASM_MACH_TX39XX_IOREMAP_H */ diff --git a/include/asm-mips/mach-jmr3927/mangle-port.h b/include/asm-mips/mach-tx39xx/mangle-port.h index 11bffcd1043b..ef0b502fd8b7 100644 --- a/include/asm-mips/mach-jmr3927/mangle-port.h +++ b/include/asm-mips/mach-tx39xx/mangle-port.h @@ -1,7 +1,12 @@ -#ifndef __ASM_MACH_JMR3927_MANGLE_PORT_H -#define __ASM_MACH_JMR3927_MANGLE_PORT_H +#ifndef __ASM_MACH_TX39XX_MANGLE_PORT_H +#define __ASM_MACH_TX39XX_MANGLE_PORT_H -extern unsigned long __swizzle_addr_b(unsigned long port); +#if defined(CONFIG_TOSHIBA_JMR3927) +extern unsigned long (*__swizzle_addr_b)(unsigned long port); +#define NEEDS_TXX9_SWIZZLE_ADDR_B +#else +#define __swizzle_addr_b(port) (port) +#endif #define __swizzle_addr_w(port) (port) #define __swizzle_addr_l(port) (port) #define __swizzle_addr_q(port) (port) @@ -15,4 +20,4 @@ extern unsigned long __swizzle_addr_b(unsigned long port); #define ioswabq(a, x) le64_to_cpu(x) #define __mem_ioswabq(a, x) (x) -#endif /* __ASM_MACH_JMR3927_MANGLE_PORT_H */ +#endif /* __ASM_MACH_TX39XX_MANGLE_PORT_H */ diff --git a/include/asm-mips/mach-jmr3927/war.h b/include/asm-mips/mach-tx39xx/war.h index 1ff55fb3fbcb..433814616359 100644 --- a/include/asm-mips/mach-jmr3927/war.h +++ b/include/asm-mips/mach-tx39xx/war.h @@ -5,8 +5,8 @@ * * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> */ -#ifndef __ASM_MIPS_MACH_JMR3927_WAR_H -#define __ASM_MIPS_MACH_JMR3927_WAR_H +#ifndef __ASM_MIPS_MACH_TX39XX_WAR_H +#define __ASM_MIPS_MACH_TX39XX_WAR_H #define R4600_V1_INDEX_ICACHEOP_WAR 0 #define R4600_V1_HIT_CACHEOP_WAR 0 @@ -22,4 +22,4 @@ #define R10000_LLSC_WAR 0 #define MIPS34K_MISSED_ITLB_WAR 0 -#endif /* __ASM_MIPS_MACH_JMR3927_WAR_H */ +#endif /* __ASM_MIPS_MACH_TX39XX_WAR_H */ diff --git a/include/asm-mips/mach-vr41xx/irq.h b/include/asm-mips/mach-vr41xx/irq.h index 848812296052..862058d3f81b 100644 --- a/include/asm-mips/mach-vr41xx/irq.h +++ b/include/asm-mips/mach-vr41xx/irq.h @@ -2,9 +2,6 @@ #define __ASM_MACH_VR41XX_IRQ_H #include <asm/vr41xx/irq.h> /* for MIPS_CPU_IRQ_BASE */ -#ifdef CONFIG_NEC_CMBVR4133 -#include <asm/vr41xx/cmbvr4133.h> /* for I8259A_IRQ_BASE */ -#endif #include_next <irq.h> diff --git a/include/asm-mips/mips-boards/generic.h b/include/asm-mips/mips-boards/generic.h index 33407bee4e73..7f0b034dd9a5 100644 --- a/include/asm-mips/mips-boards/generic.h +++ b/include/asm-mips/mips-boards/generic.h @@ -27,12 +27,8 @@ /* * Display register base. */ -#ifdef CONFIG_MIPS_SEAD -#define ASCII_DISPLAY_POS_BASE 0x1f0005c0 -#else #define ASCII_DISPLAY_WORD_BASE 0x1f000410 #define ASCII_DISPLAY_POS_BASE 0x1f000418 -#endif /* @@ -44,13 +40,8 @@ /* * Reset register. */ -#ifdef CONFIG_MIPS_SEAD -#define SOFTRES_REG 0x1e800050 -#define GORESET 0x4d -#else #define SOFTRES_REG 0x1f000500 #define GORESET 0x42 -#endif /* * Revision register. diff --git a/include/asm-mips/namei.h b/include/asm-mips/namei.h index c94d12d1f868..a6605a752469 100644 --- a/include/asm-mips/namei.h +++ b/include/asm-mips/namei.h @@ -1,26 +1,11 @@ #ifndef _ASM_NAMEI_H #define _ASM_NAMEI_H -#include <linux/personality.h> -#include <linux/stddef.h> +/* + * This dummy routine maybe changed to something useful + * for /usr/gnemul/ emulation stuff. + */ -#define IRIX_EMUL "/usr/gnemul/irix/" -#define RISCOS_EMUL "/usr/gnemul/riscos/" - -static inline char *__emul_prefix(void) -{ - switch (current->personality) { - case PER_IRIX32: - case PER_IRIXN32: - case PER_IRIX64: - return IRIX_EMUL; - - case PER_RISCOS: - return RISCOS_EMUL; - - default: - return NULL; - } -} +#define __emul_prefix() NULL #endif /* _ASM_NAMEI_H */ diff --git a/include/asm-mips/pci.h b/include/asm-mips/pci.h index 301ff2f28012..d3be83436070 100644 --- a/include/asm-mips/pci.h +++ b/include/asm-mips/pci.h @@ -172,4 +172,7 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) return channel ? 15 : 14; } +extern int pci_probe_only; +extern unsigned int pcibios_max_latency; + #endif /* _ASM_PCI_H */ diff --git a/include/asm-mips/prctl.h b/include/asm-mips/prctl.h deleted file mode 100644 index 8121a9a75bfd..000000000000 --- a/include/asm-mips/prctl.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * IRIX prctl interface - * - * The IRIX kernel maps a page at PRDA_ADDRESS with the - * contents of prda and fills it the bits on prda_sys. - */ - -#ifndef __PRCTL_H__ -#define __PRCTL_H__ - -#define PRDA_ADDRESS 0x200000L -#define PRDA ((struct prda *) PRDA_ADDRESS) - -struct prda_sys { - pid_t t_pid; - u32 t_hint; - u32 t_dlactseq; - u32 t_fpflags; - u32 t_prid; /* processor type, $prid CP0 register */ - u32 t_dlendseq; - u64 t_unused1[5]; - pid_t t_rpid; - s32 t_resched; - u32 t_unused[8]; - u32 t_cpu; /* current/last cpu */ - - /* FIXME: The signal information, not supported by Linux now */ - u32 t_flags; /* if true, then the sigprocmask is in userspace */ - u32 t_sigprocmask [1]; /* the sigprocmask */ -}; - -struct prda { - char fill [0xe00]; - struct prda_sys prda_sys; -}; - -#define t_sys prda_sys - -ptrdiff_t prctl(int op, int v1, int v2); - -#endif diff --git a/include/asm-mips/setup.h b/include/asm-mips/setup.h index 70009a902639..883f59bfa097 100644 --- a/include/asm-mips/setup.h +++ b/include/asm-mips/setup.h @@ -3,4 +3,6 @@ #define COMMAND_LINE_SIZE 256 +extern void setup_early_printk(void); + #endif /* __SETUP_H */ diff --git a/include/asm-mips/signal.h b/include/asm-mips/signal.h index 7a28989f7ee3..bee5153aca48 100644 --- a/include/asm-mips/signal.h +++ b/include/asm-mips/signal.h @@ -119,9 +119,6 @@ struct sigaction { struct k_sigaction { struct sigaction sa; -#ifdef CONFIG_BINFMT_IRIX - void (*sa_restorer)(void); -#endif }; /* IRIX compatible stack_t */ diff --git a/include/asm-mips/traps.h b/include/asm-mips/traps.h index e5dbde625ec2..90ff2f497c50 100644 --- a/include/asm-mips/traps.h +++ b/include/asm-mips/traps.h @@ -24,6 +24,5 @@ extern int (*board_be_handler)(struct pt_regs *regs, int is_fixup); extern void (*board_nmi_handler_setup)(void); extern void (*board_ejtag_handler_setup)(void); extern void (*board_bind_eic_interrupt)(int irq, int regset); -extern void (*board_watchpoint_handler)(struct pt_regs *regs); #endif /* _ASM_TRAPS_H */ diff --git a/include/asm-mips/tx4927/tx4927.h b/include/asm-mips/tx4927/tx4927.h deleted file mode 100644 index 193e80a17c12..000000000000 --- a/include/asm-mips/tx4927/tx4927.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2001-2006 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#ifndef __ASM_TX4927_TX4927_H -#define __ASM_TX4927_TX4927_H - -#include <asm/txx9irq.h> - -#define TX4927_IRQ_CP0_BEG MIPS_CPU_IRQ_BASE -#define TX4927_IRQ_CP0_END (MIPS_CPU_IRQ_BASE + 8 - 1) - -#define TX4927_IRQ_PIC_BEG TXX9_IRQ_BASE -#define TX4927_IRQ_PIC_END (TXX9_IRQ_BASE + TXx9_MAX_IR - 1) - - -#define TX4927_IRQ_USER0 (TX4927_IRQ_CP0_BEG+0) -#define TX4927_IRQ_USER1 (TX4927_IRQ_CP0_BEG+1) -#define TX4927_IRQ_NEST_PIC_ON_CP0 (TX4927_IRQ_CP0_BEG+2) -#define TX4927_IRQ_CPU_TIMER (TX4927_IRQ_CP0_BEG+7) - -#define TX4927_IRQ_NEST_EXT_ON_PIC (TX4927_IRQ_PIC_BEG+3) - -#endif /* __ASM_TX4927_TX4927_H */ diff --git a/include/asm-mips/tx4927/tx4927_pci.h b/include/asm-mips/tx4927/tx4927_pci.h deleted file mode 100644 index 0be77df70f2b..000000000000 --- a/include/asm-mips/tx4927/tx4927_pci.h +++ /dev/null @@ -1,268 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000-2001 Toshiba Corporation - */ -#ifndef __ASM_TX4927_TX4927_PCI_H -#define __ASM_TX4927_TX4927_PCI_H - -#define TX4927_CCFG_TOE 0x00004000 -#define TX4927_CCFG_WR 0x00008000 -#define TX4927_CCFG_TINTDIS 0x01000000 - -#define TX4927_PCIMEM 0x08000000 -#define TX4927_PCIMEM_SIZE 0x08000000 -#define TX4927_PCIIO 0x16000000 -#define TX4927_PCIIO_SIZE 0x01000000 - -#define TX4927_SDRAMC_REG 0xff1f8000 -#define TX4927_EBUSC_REG 0xff1f9000 -#define TX4927_PCIC_REG 0xff1fd000 -#define TX4927_CCFG_REG 0xff1fe000 -#define TX4927_IRC_REG 0xff1ff600 -#define TX4927_NR_TMR 3 -#define TX4927_TMR_REG(ch) (0xff1ff000 + (ch) * 0x100) -#define TX4927_CE3 0x17f00000 /* 1M */ -#define TX4927_PCIRESET_ADDR 0xbc00f006 -#define TX4927_PCI_CLK_ADDR (KSEG1 + TX4927_CE3 + 0x00040020) - -#define TX4927_IMSTAT_ADDR(n) (KSEG1 + TX4927_CE3 + 0x0004001a + (n)) -#define tx4927_imstat_ptr(n) \ - ((volatile unsigned char *)TX4927_IMSTAT_ADDR(n)) - -/* bits for ISTAT3/IMASK3/IMSTAT3 */ -#define TX4927_INT3B_PCID 0 -#define TX4927_INT3B_PCIC 1 -#define TX4927_INT3B_PCIB 2 -#define TX4927_INT3B_PCIA 3 -#define TX4927_INT3F_PCID (1 << TX4927_INT3B_PCID) -#define TX4927_INT3F_PCIC (1 << TX4927_INT3B_PCIC) -#define TX4927_INT3F_PCIB (1 << TX4927_INT3B_PCIB) -#define TX4927_INT3F_PCIA (1 << TX4927_INT3B_PCIA) - -/* bits for PCI_CLK (S6) */ -#define TX4927_PCI_CLK_HOST 0x80 -#define TX4927_PCI_CLK_MASK (0x0f << 3) -#define TX4927_PCI_CLK_33 (0x01 << 3) -#define TX4927_PCI_CLK_25 (0x04 << 3) -#define TX4927_PCI_CLK_66 (0x09 << 3) -#define TX4927_PCI_CLK_50 (0x0c << 3) -#define TX4927_PCI_CLK_ACK 0x04 -#define TX4927_PCI_CLK_ACE 0x02 -#define TX4927_PCI_CLK_ENDIAN 0x01 -#define TX4927_NR_IRQ_LOCAL TX4927_IRQ_PIC_BEG -#define TX4927_NR_IRQ_IRC 32 /* On-Chip IRC */ - -#define TX4927_IR_PCIC 16 -#define TX4927_IR_PCIERR 22 -#define TX4927_IR_PCIPMA 23 -#define TX4927_IRQ_IRC_PCIC (TX4927_NR_IRQ_LOCAL + TX4927_IR_PCIC) -#define TX4927_IRQ_IRC_PCIERR (TX4927_NR_IRQ_LOCAL + TX4927_IR_PCIERR) -#define TX4927_IRQ_IOC1 (TX4927_NR_IRQ_LOCAL + TX4927_NR_IRQ_IRC) -#define TX4927_IRQ_IOC_PCID (TX4927_IRQ_IOC1 + TX4927_INT3B_PCID) -#define TX4927_IRQ_IOC_PCIC (TX4927_IRQ_IOC1 + TX4927_INT3B_PCIC) -#define TX4927_IRQ_IOC_PCIB (TX4927_IRQ_IOC1 + TX4927_INT3B_PCIB) -#define TX4927_IRQ_IOC_PCIA (TX4927_IRQ_IOC1 + TX4927_INT3B_PCIA) - -#ifdef _LANGUAGE_ASSEMBLY -#define _CONST64(c) c -#else -#define _CONST64(c) c##ull - -#include <asm/byteorder.h> - -#define tx4927_pcireset_ptr \ - ((volatile unsigned char *)TX4927_PCIRESET_ADDR) -#define tx4927_pci_clk_ptr \ - ((volatile unsigned char *)TX4927_PCI_CLK_ADDR) - -struct tx4927_sdramc_reg { - volatile unsigned long long cr[4]; - volatile unsigned long long unused0[4]; - volatile unsigned long long tr; - volatile unsigned long long unused1[2]; - volatile unsigned long long cmd; -}; - -struct tx4927_ebusc_reg { - volatile unsigned long long cr[8]; -}; - -struct tx4927_ccfg_reg { - volatile unsigned long long ccfg; - volatile unsigned long long crir; - volatile unsigned long long pcfg; - volatile unsigned long long tear; - volatile unsigned long long clkctr; - volatile unsigned long long unused0; - volatile unsigned long long garbc; - volatile unsigned long long unused1; - volatile unsigned long long unused2; - volatile unsigned long long ramp; -}; - -struct tx4927_pcic_reg { - volatile unsigned long pciid; - volatile unsigned long pcistatus; - volatile unsigned long pciccrev; - volatile unsigned long pcicfg1; - volatile unsigned long p2gm0plbase; /* +10 */ - volatile unsigned long p2gm0pubase; - volatile unsigned long p2gm1plbase; - volatile unsigned long p2gm1pubase; - volatile unsigned long p2gm2pbase; /* +20 */ - volatile unsigned long p2giopbase; - volatile unsigned long unused0; - volatile unsigned long pcisid; - volatile unsigned long unused1; /* +30 */ - volatile unsigned long pcicapptr; - volatile unsigned long unused2; - volatile unsigned long pcicfg2; - volatile unsigned long g2ptocnt; /* +40 */ - volatile unsigned long unused3[15]; - volatile unsigned long g2pstatus; /* +80 */ - volatile unsigned long g2pmask; - volatile unsigned long pcisstatus; - volatile unsigned long pcimask; - volatile unsigned long p2gcfg; /* +90 */ - volatile unsigned long p2gstatus; - volatile unsigned long p2gmask; - volatile unsigned long p2gccmd; - volatile unsigned long unused4[24]; /* +a0 */ - volatile unsigned long pbareqport; /* +100 */ - volatile unsigned long pbacfg; - volatile unsigned long pbastatus; - volatile unsigned long pbamask; - volatile unsigned long pbabm; /* +110 */ - volatile unsigned long pbacreq; - volatile unsigned long pbacgnt; - volatile unsigned long pbacstate; - volatile unsigned long long g2pmgbase[3]; /* +120 */ - volatile unsigned long long g2piogbase; - volatile unsigned long g2pmmask[3]; /* +140 */ - volatile unsigned long g2piomask; - volatile unsigned long long g2pmpbase[3]; /* +150 */ - volatile unsigned long long g2piopbase; - volatile unsigned long pciccfg; /* +170 */ - volatile unsigned long pcicstatus; - volatile unsigned long pcicmask; - volatile unsigned long unused5; - volatile unsigned long long p2gmgbase[3]; /* +180 */ - volatile unsigned long long p2giogbase; - volatile unsigned long g2pcfgadrs; /* +1a0 */ - volatile unsigned long g2pcfgdata; - volatile unsigned long unused6[8]; - volatile unsigned long g2pintack; - volatile unsigned long g2pspc; - volatile unsigned long unused7[12]; /* +1d0 */ - volatile unsigned long long pdmca; /* +200 */ - volatile unsigned long long pdmga; - volatile unsigned long long pdmpa; - volatile unsigned long long pdmcut; - volatile unsigned long long pdmcnt; /* +220 */ - volatile unsigned long long pdmsts; - volatile unsigned long long unused8[2]; - volatile unsigned long long pdmdb[4]; /* +240 */ - volatile unsigned long long pdmtdh; /* +260 */ - volatile unsigned long long pdmdms; -}; - -#endif /* _LANGUAGE_ASSEMBLY */ - -/* - * PCIC - */ - -/* bits for G2PSTATUS/G2PMASK */ -#define TX4927_PCIC_G2PSTATUS_ALL 0x00000003 -#define TX4927_PCIC_G2PSTATUS_TTOE 0x00000002 -#define TX4927_PCIC_G2PSTATUS_RTOE 0x00000001 - -/* bits for PCIMASK (see also PCI_STATUS_XXX in linux/pci.h */ -#define TX4927_PCIC_PCISTATUS_ALL 0x0000f900 - -/* bits for PBACFG */ -#define TX4927_PCIC_PBACFG_RPBA 0x00000004 -#define TX4927_PCIC_PBACFG_PBAEN 0x00000002 -#define TX4927_PCIC_PBACFG_BMCEN 0x00000001 - -/* bits for G2PMnGBASE */ -#define TX4927_PCIC_G2PMnGBASE_BSDIS _CONST64(0x0000002000000000) -#define TX4927_PCIC_G2PMnGBASE_ECHG _CONST64(0x0000001000000000) - -/* bits for G2PIOGBASE */ -#define TX4927_PCIC_G2PIOGBASE_BSDIS _CONST64(0x0000002000000000) -#define TX4927_PCIC_G2PIOGBASE_ECHG _CONST64(0x0000001000000000) - -/* bits for PCICSTATUS/PCICMASK */ -#define TX4927_PCIC_PCICSTATUS_ALL 0x000007dc - -/* bits for PCICCFG */ -#define TX4927_PCIC_PCICCFG_LBWC_MASK 0x0fff0000 -#define TX4927_PCIC_PCICCFG_HRST 0x00000800 -#define TX4927_PCIC_PCICCFG_SRST 0x00000400 -#define TX4927_PCIC_PCICCFG_IRBER 0x00000200 -#define TX4927_PCIC_PCICCFG_IMSE0 0x00000100 -#define TX4927_PCIC_PCICCFG_IMSE1 0x00000080 -#define TX4927_PCIC_PCICCFG_IMSE2 0x00000040 -#define TX4927_PCIC_PCICCFG_IISE 0x00000020 -#define TX4927_PCIC_PCICCFG_ATR 0x00000010 -#define TX4927_PCIC_PCICCFG_ICAE 0x00000008 - -/* bits for P2GMnGBASE */ -#define TX4927_PCIC_P2GMnGBASE_TMEMEN _CONST64(0x0000004000000000) -#define TX4927_PCIC_P2GMnGBASE_TBSDIS _CONST64(0x0000002000000000) -#define TX4927_PCIC_P2GMnGBASE_TECHG _CONST64(0x0000001000000000) - -/* bits for P2GIOGBASE */ -#define TX4927_PCIC_P2GIOGBASE_TIOEN _CONST64(0x0000004000000000) -#define TX4927_PCIC_P2GIOGBASE_TBSDIS _CONST64(0x0000002000000000) -#define TX4927_PCIC_P2GIOGBASE_TECHG _CONST64(0x0000001000000000) - -#define TX4927_PCIC_IDSEL_AD_TO_SLOT(ad) ((ad) - 11) -#define TX4927_PCIC_MAX_DEVNU TX4927_PCIC_IDSEL_AD_TO_SLOT(32) - -/* - * CCFG - */ -/* CCFG : Chip Configuration */ -#define TX4927_CCFG_PCI66 0x00800000 -#define TX4927_CCFG_PCIMIDE 0x00400000 -#define TX4927_CCFG_PCIXARB 0x00002000 -#define TX4927_CCFG_PCIDIVMODE_MASK 0x00001800 -#define TX4927_CCFG_PCIDIVMODE_2_5 0x00000000 -#define TX4927_CCFG_PCIDIVMODE_3 0x00000800 -#define TX4927_CCFG_PCIDIVMODE_5 0x00001000 -#define TX4927_CCFG_PCIDIVMODE_6 0x00001800 - -#define TX4937_CCFG_PCIDIVMODE_MASK 0x00001c00 -#define TX4937_CCFG_PCIDIVMODE_8 0x00000000 -#define TX4937_CCFG_PCIDIVMODE_4 0x00000400 -#define TX4937_CCFG_PCIDIVMODE_9 0x00000800 -#define TX4937_CCFG_PCIDIVMODE_4_5 0x00000c00 -#define TX4937_CCFG_PCIDIVMODE_10 0x00001000 -#define TX4937_CCFG_PCIDIVMODE_5 0x00001400 -#define TX4937_CCFG_PCIDIVMODE_11 0x00001800 -#define TX4937_CCFG_PCIDIVMODE_5_5 0x00001c00 - -/* PCFG : Pin Configuration */ -#define TX4927_PCFG_PCICLKEN_ALL 0x003f0000 -#define TX4927_PCFG_PCICLKEN(ch) (0x00010000<<(ch)) - -/* CLKCTR : Clock Control */ -#define TX4927_CLKCTR_PCICKD 0x00400000 -#define TX4927_CLKCTR_PCIRST 0x00000040 - - -#ifndef _LANGUAGE_ASSEMBLY - -#define tx4927_sdramcptr ((struct tx4927_sdramc_reg *)TX4927_SDRAMC_REG) -#define tx4927_pcicptr ((struct tx4927_pcic_reg *)TX4927_PCIC_REG) -#define tx4927_ccfgptr ((struct tx4927_ccfg_reg *)TX4927_CCFG_REG) -#define tx4927_ebuscptr ((struct tx4927_ebusc_reg *)TX4927_EBUSC_REG) - -#endif /* _LANGUAGE_ASSEMBLY */ - -#endif /* __ASM_TX4927_TX4927_PCI_H */ diff --git a/include/asm-mips/txx9/generic.h b/include/asm-mips/txx9/generic.h new file mode 100644 index 000000000000..d8756660523d --- /dev/null +++ b/include/asm-mips/txx9/generic.h @@ -0,0 +1,41 @@ +/* + * linux/include/asm-mips/txx9/generic.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_TXX9_GENERIC_H +#define __ASM_TXX9_GENERIC_H + +#include <linux/init.h> +#include <linux/ioport.h> /* for struct resource */ + +extern struct resource txx9_ce_res[]; +extern char txx9_pcode_str[8]; +void txx9_reg_res_init(unsigned int pcode, unsigned long base, + unsigned long size); + +extern unsigned int txx9_master_clock; +extern unsigned int txx9_cpu_clock; +extern unsigned int txx9_gbus_clock; + +struct pci_dev; +struct txx9_board_vec { + const char *system; + void (*prom_init)(void); + void (*mem_setup)(void); + void (*irq_setup)(void); + void (*time_init)(void); + void (*arch_init)(void); + void (*device_init)(void); +#ifdef CONFIG_PCI + int (*pci_map_irq)(const struct pci_dev *dev, u8 slot, u8 pin); +#endif +}; +extern struct txx9_board_vec *txx9_board_vec; +extern int (*txx9_irq_dispatch)(int pending); +void prom_init_cmdline(void); +char *prom_getcmdline(void); + +#endif /* __ASM_TXX9_GENERIC_H */ diff --git a/include/asm-mips/jmr3927/jmr3927.h b/include/asm-mips/txx9/jmr3927.h index a162268f17df..d6eb1b6a54eb 100644 --- a/include/asm-mips/jmr3927/jmr3927.h +++ b/include/asm-mips/txx9/jmr3927.h @@ -7,10 +7,10 @@ * * Copyright (C) 2000-2001 Toshiba Corporation */ -#ifndef __ASM_TX3927_JMR3927_H -#define __ASM_TX3927_JMR3927_H +#ifndef __ASM_TXX9_JMR3927_H +#define __ASM_TXX9_JMR3927_H -#include <asm/jmr3927/tx3927.h> +#include <asm/txx9/tx3927.h> #include <asm/addrspace.h> #include <asm/system.h> #include <asm/txx9irq.h> @@ -174,4 +174,9 @@ * INT[3:0] */ -#endif /* __ASM_TX3927_JMR3927_H */ +void jmr3927_prom_init(void); +void jmr3927_irq_setup(void); +struct pci_dev; +int jmr3927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); + +#endif /* __ASM_TXX9_JMR3927_H */ diff --git a/include/asm-mips/txx9/pci.h b/include/asm-mips/txx9/pci.h new file mode 100644 index 000000000000..d89a45091e24 --- /dev/null +++ b/include/asm-mips/txx9/pci.h @@ -0,0 +1,36 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_TXX9_PCI_H +#define __ASM_TXX9_PCI_H + +#include <linux/pci.h> + +extern struct pci_controller txx9_primary_pcic; +struct pci_controller * +txx9_alloc_pci_controller(struct pci_controller *pcic, + unsigned long mem_base, unsigned long mem_size, + unsigned long io_base, unsigned long io_size); + +int txx9_pci66_check(struct pci_controller *hose, int top_bus, + int current_bus); +extern int txx9_pci_mem_high __initdata; + +extern int txx9_pci_option; +#define TXX9_PCI_OPT_PICMG 0x0002 +#define TXX9_PCI_OPT_CLK_33 0x0008 +#define TXX9_PCI_OPT_CLK_66 0x0010 +#define TXX9_PCI_OPT_CLK_MASK \ + (TXX9_PCI_OPT_CLK_33 | TXX9_PCI_OPT_CLK_66) +#define TXX9_PCI_OPT_CLK_AUTO TXX9_PCI_OPT_CLK_MASK + +enum txx9_pci_err_action { + TXX9_PCI_ERR_REPORT, + TXX9_PCI_ERR_IGNORE, + TXX9_PCI_ERR_PANIC, +}; +extern enum txx9_pci_err_action txx9_pci_err_action; + +#endif /* __ASM_TXX9_PCI_H */ diff --git a/include/asm-mips/tx4927/toshiba_rbtx4927.h b/include/asm-mips/txx9/rbtx4927.h index b188a659ce02..bf194589216f 100644 --- a/include/asm-mips/tx4927/toshiba_rbtx4927.h +++ b/include/asm-mips/txx9/rbtx4927.h @@ -24,18 +24,42 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#ifndef __ASM_TX4927_TOSHIBA_RBTX4927_H -#define __ASM_TX4927_TOSHIBA_RBTX4927_H +#ifndef __ASM_TXX9_RBTX4927_H +#define __ASM_TXX9_RBTX4927_H -#include <asm/tx4927/tx4927.h> -#ifdef CONFIG_PCI -#include <asm/tx4927/tx4927_pci.h> -#endif +#include <asm/txx9/tx4927.h> + +#define RBTX4927_PCIMEM 0x08000000 +#define RBTX4927_PCIMEM_SIZE 0x08000000 +#define RBTX4927_PCIIO 0x16000000 +#define RBTX4927_PCIIO_SIZE 0x01000000 + +#define rbtx4927_pcireset_addr ((__u8 __iomem *)0xbc00f006UL) + +/* bits for ISTAT/IMASK/IMSTAT */ +#define RBTX4927_INTB_PCID 0 +#define RBTX4927_INTB_PCIC 1 +#define RBTX4927_INTB_PCIB 2 +#define RBTX4927_INTB_PCIA 3 +#define RBTX4927_INTF_PCID (1 << RBTX4927_INTB_PCID) +#define RBTX4927_INTF_PCIC (1 << RBTX4927_INTB_PCIC) +#define RBTX4927_INTF_PCIB (1 << RBTX4927_INTB_PCIB) +#define RBTX4927_INTF_PCIA (1 << RBTX4927_INTB_PCIA) + +#define RBTX4927_NR_IRQ_IOC 8 /* IOC */ + +#define RBTX4927_IRQ_IOC (TXX9_IRQ_BASE + TX4927_NUM_IR) +#define RBTX4927_IRQ_IOC_PCID (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCID) +#define RBTX4927_IRQ_IOC_PCIC (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIC) +#define RBTX4927_IRQ_IOC_PCIB (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIB) +#define RBTX4927_IRQ_IOC_PCIA (RBTX4927_IRQ_IOC + RBTX4927_INTB_PCIA) + +#define RBTX4927_IRQ_IOCINT (TXX9_IRQ_BASE + TX4927_IR_INT(1)) #ifdef CONFIG_PCI -#define TBTX4927_ISA_IO_OFFSET TX4927_PCIIO +#define RBTX4927_ISA_IO_OFFSET RBTX4927_PCIIO #else -#define TBTX4927_ISA_IO_OFFSET 0 +#define RBTX4927_ISA_IO_OFFSET 0 #endif #define RBTX4927_SW_RESET_DO (void __iomem *)0xbc00f000UL @@ -44,10 +68,12 @@ #define RBTX4927_SW_RESET_ENABLE (void __iomem *)0xbc00f002UL #define RBTX4927_SW_RESET_ENABLE_SET 0x01 +#define RBTX4927_RTL_8019_BASE (0x1c020280 - RBTX4927_ISA_IO_OFFSET) +#define RBTX4927_RTL_8019_IRQ (TXX9_IRQ_BASE + TX4927_IR_INT(3)) -#define RBTX4927_RTL_8019_BASE (0x1c020280-TBTX4927_ISA_IO_OFFSET) -#define RBTX4927_RTL_8019_IRQ (TX4927_IRQ_PIC_BEG + 5) - -int toshiba_rbtx4927_irq_nested(int sw_irq); +void rbtx4927_prom_init(void); +void rbtx4927_irq_setup(void); +struct pci_dev; +int rbtx4927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); -#endif /* __ASM_TX4927_TOSHIBA_RBTX4927_H */ +#endif /* __ASM_TXX9_RBTX4927_H */ diff --git a/include/asm-mips/tx4938/rbtx4938.h b/include/asm-mips/txx9/rbtx4938.h index dfed7beb533f..2f5d5e705a41 100644 --- a/include/asm-mips/tx4938/rbtx4938.h +++ b/include/asm-mips/txx9/rbtx4938.h @@ -1,5 +1,4 @@ /* - * linux/include/asm-mips/tx4938/rbtx4938.h * Definitions for TX4937/TX4938 * * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the @@ -9,12 +8,12 @@ * * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) */ -#ifndef __ASM_TX_BOARDS_RBTX4938_H -#define __ASM_TX_BOARDS_RBTX4938_H +#ifndef __ASM_TXX9_RBTX4938_H +#define __ASM_TXX9_RBTX4938_H #include <asm/addrspace.h> -#include <asm/tx4938/tx4938.h> #include <asm/txx9irq.h> +#include <asm/txx9/tx4938.h> /* CS */ #define RBTX4938_CE0 0x1c000000 /* 64M */ @@ -102,35 +101,12 @@ * that particular IRQ on an RBTX4938 machine. Add new 'spaces' as new * IRQ hardware is supported. */ -#define RBTX4938_NR_IRQ_LOCAL 8 -#define RBTX4938_NR_IRQ_IRC 32 /* On-Chip IRC */ #define RBTX4938_NR_IRQ_IOC 8 -#define TX4938_IRQ_CP0_BEG MIPS_CPU_IRQ_BASE -#define TX4938_IRQ_CP0_END (MIPS_CPU_IRQ_BASE + 8 - 1) - -#define TX4938_IRQ_PIC_BEG TXX9_IRQ_BASE -#define TX4938_IRQ_PIC_END (TXX9_IRQ_BASE + TXx9_MAX_IR - 1) -#define TX4938_IRQ_NEST_EXT_ON_PIC (TX4938_IRQ_PIC_BEG+2) -#define TX4938_IRQ_NEST_PIC_ON_CP0 (TX4938_IRQ_CP0_BEG+2) -#define TX4938_IRQ_USER0 (TX4938_IRQ_CP0_BEG+0) -#define TX4938_IRQ_USER1 (TX4938_IRQ_CP0_BEG+1) -#define TX4938_IRQ_CPU_TIMER (TX4938_IRQ_CP0_BEG+7) - -#define TOSHIBA_RBTX4938_IRQ_IOC_RAW_BEG 0 -#define TOSHIBA_RBTX4938_IRQ_IOC_RAW_END 7 - -#define TOSHIBA_RBTX4938_IRQ_IOC_BEG ((TX4938_IRQ_PIC_END+1)+TOSHIBA_RBTX4938_IRQ_IOC_RAW_BEG) /* 56 */ -#define TOSHIBA_RBTX4938_IRQ_IOC_END ((TX4938_IRQ_PIC_END+1)+TOSHIBA_RBTX4938_IRQ_IOC_RAW_END) /* 63 */ -#define RBTX4938_IRQ_LOCAL TX4938_IRQ_CP0_BEG -#define RBTX4938_IRQ_IRC (RBTX4938_IRQ_LOCAL + RBTX4938_NR_IRQ_LOCAL) -#define RBTX4938_IRQ_IOC (RBTX4938_IRQ_IRC + RBTX4938_NR_IRQ_IRC) +#define RBTX4938_IRQ_IRC TXX9_IRQ_BASE +#define RBTX4938_IRQ_IOC (TXX9_IRQ_BASE + TX4938_NUM_IR) #define RBTX4938_IRQ_END (RBTX4938_IRQ_IOC + RBTX4938_NR_IRQ_IOC) -#define RBTX4938_IRQ_LOCAL_SOFT0 (RBTX4938_IRQ_LOCAL + RBTX4938_SOFT_INT0) -#define RBTX4938_IRQ_LOCAL_SOFT1 (RBTX4938_IRQ_LOCAL + RBTX4938_SOFT_INT1) -#define RBTX4938_IRQ_LOCAL_IRC (RBTX4938_IRQ_LOCAL + RBTX4938_IRC_INT) -#define RBTX4938_IRQ_LOCAL_TIMER (RBTX4938_IRQ_LOCAL + RBTX4938_TIMER_INT) #define RBTX4938_IRQ_IRC_ECCERR (RBTX4938_IRQ_IRC + TX4938_IR_ECCERR) #define RBTX4938_IRQ_IRC_WTOERR (RBTX4938_IRQ_IRC + TX4938_IR_WTOERR) #define RBTX4938_IRQ_IRC_INT(n) (RBTX4938_IRQ_IRC + TX4938_IR_INT(n)) @@ -158,11 +134,16 @@ /* IOC (PCI, etc) */ -#define RBTX4938_IRQ_IOCINT (TX4938_IRQ_NEST_EXT_ON_PIC) +#define RBTX4938_IRQ_IOCINT (TXX9_IRQ_BASE + TX4938_IR_INT(0)) /* Onboard 10M Ether */ -#define RBTX4938_IRQ_ETHER (TX4938_IRQ_NEST_EXT_ON_PIC + 1) +#define RBTX4938_IRQ_ETHER (TXX9_IRQ_BASE + TX4938_IR_INT(1)) #define RBTX4938_RTL_8019_BASE (RBTX4938_ETHER_ADDR - mips_io_port_base) #define RBTX4938_RTL_8019_IRQ (RBTX4938_IRQ_ETHER) -#endif /* __ASM_TX_BOARDS_RBTX4938_H */ +void rbtx4938_prom_init(void); +void rbtx4938_irq_setup(void); +struct pci_dev; +int rbtx4938_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); + +#endif /* __ASM_TXX9_RBTX4938_H */ diff --git a/include/asm-mips/tx4927/smsc_fdc37m81x.h b/include/asm-mips/txx9/smsc_fdc37m81x.h index 5d93bab51254..9375e4fc2289 100644 --- a/include/asm-mips/tx4927/smsc_fdc37m81x.h +++ b/include/asm-mips/txx9/smsc_fdc37m81x.h @@ -1,6 +1,4 @@ /* - * linux/include/asm-mips/tx4927/smsc_fdc37m81x.h - * * Interface for smsc fdc48m81x Super IO chip * * Author: MontaVista Software, Inc. source@mvista.com diff --git a/include/asm-mips/tx4938/spi.h b/include/asm-mips/txx9/spi.h index 6a60c83e152b..ddfb2a0dc432 100644 --- a/include/asm-mips/tx4938/spi.h +++ b/include/asm-mips/txx9/spi.h @@ -1,5 +1,4 @@ /* - * linux/include/asm-mips/tx4938/spi.h * Definitions for TX4937/TX4938 SPI * * Copyright (C) 2000-2001 Toshiba Corporation @@ -11,10 +10,10 @@ * * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) */ -#ifndef __ASM_TX_BOARDS_TX4938_SPI_H -#define __ASM_TX_BOARDS_TX4938_SPI_H +#ifndef __ASM_TXX9_SPI_H +#define __ASM_TXX9_SPI_H extern int spi_eeprom_register(int chipid); extern int spi_eeprom_read(int chipid, int address, unsigned char *buf, int len); -#endif /* __ASM_TX_BOARDS_TX4938_SPI_H */ +#endif /* __ASM_TXX9_SPI_H */ diff --git a/include/asm-mips/jmr3927/tx3927.h b/include/asm-mips/txx9/tx3927.h index fb580333c102..ca414c7624e1 100644 --- a/include/asm-mips/jmr3927/tx3927.h +++ b/include/asm-mips/txx9/tx3927.h @@ -5,10 +5,10 @@ * * Copyright (C) 2000 Toshiba Corporation */ -#ifndef __ASM_TX3927_H -#define __ASM_TX3927_H +#ifndef __ASM_TXX9_TX3927_H +#define __ASM_TXX9_TX3927_H -#include <asm/jmr3927/txx927.h> +#include <asm/txx9/txx927.h> #define TX3927_SDRAMC_REG 0xfffe8000 #define TX3927_ROMC_REG 0xfffe9000 @@ -316,4 +316,8 @@ struct tx3927_ccfg_reg { #define tx3927_sioptr(ch) ((struct txx927_sio_reg *)TX3927_SIO_REG(ch)) #define tx3927_pioptr ((struct txx9_pio_reg __iomem *)TX3927_PIO_REG) -#endif /* __ASM_TX3927_H */ +struct pci_controller; +void __init tx3927_pcic_setup(struct pci_controller *channel, + unsigned long sdram_size, int extarb); + +#endif /* __ASM_TXX9_TX3927_H */ diff --git a/include/asm-mips/txx9/tx4927.h b/include/asm-mips/txx9/tx4927.h new file mode 100644 index 000000000000..46d60afc038b --- /dev/null +++ b/include/asm-mips/txx9/tx4927.h @@ -0,0 +1,219 @@ +/* + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * Copyright 2001-2006 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR + * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE + * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __ASM_TXX9_TX4927_H +#define __ASM_TXX9_TX4927_H + +#include <linux/types.h> +#include <linux/io.h> +#include <asm/txx9irq.h> +#include <asm/txx9/tx4927pcic.h> + +#define TX4927_SDRAMC_REG 0xff1f8000 +#define TX4927_EBUSC_REG 0xff1f9000 +#define TX4927_PCIC_REG 0xff1fd000 +#define TX4927_CCFG_REG 0xff1fe000 +#define TX4927_IRC_REG 0xff1ff600 +#define TX4927_NR_TMR 3 +#define TX4927_TMR_REG(ch) (0xff1ff000 + (ch) * 0x100) + +#define TX4927_IR_INT(n) (2 + (n)) +#define TX4927_IR_SIO(n) (8 + (n)) +#define TX4927_IR_PCIC 16 +#define TX4927_IR_PCIERR 22 +#define TX4927_NUM_IR 32 + +#define TX4927_IRC_INT 2 /* IP[2] in Status register */ + +struct tx4927_sdramc_reg { + volatile unsigned long long cr[4]; + volatile unsigned long long unused0[4]; + volatile unsigned long long tr; + volatile unsigned long long unused1[2]; + volatile unsigned long long cmd; +}; + +struct tx4927_ebusc_reg { + volatile unsigned long long cr[8]; +}; + +struct tx4927_ccfg_reg { + u64 ccfg; + u64 crir; + u64 pcfg; + u64 toea; + u64 clkctr; + u64 unused0; + u64 garbc; + u64 unused1; + u64 unused2; + u64 ramp; +}; + +/* + * CCFG + */ +/* CCFG : Chip Configuration */ +#define TX4927_CCFG_WDRST 0x0000020000000000ULL +#define TX4927_CCFG_WDREXEN 0x0000010000000000ULL +#define TX4927_CCFG_BCFG_MASK 0x000000ff00000000ULL +#define TX4927_CCFG_TINTDIS 0x01000000 +#define TX4927_CCFG_PCI66 0x00800000 +#define TX4927_CCFG_PCIMODE 0x00400000 +#define TX4927_CCFG_DIVMODE_MASK 0x000e0000 +#define TX4927_CCFG_DIVMODE_8 (0x0 << 17) +#define TX4927_CCFG_DIVMODE_12 (0x1 << 17) +#define TX4927_CCFG_DIVMODE_16 (0x2 << 17) +#define TX4927_CCFG_DIVMODE_10 (0x3 << 17) +#define TX4927_CCFG_DIVMODE_2 (0x4 << 17) +#define TX4927_CCFG_DIVMODE_3 (0x5 << 17) +#define TX4927_CCFG_DIVMODE_4 (0x6 << 17) +#define TX4927_CCFG_DIVMODE_2_5 (0x7 << 17) +#define TX4927_CCFG_BEOW 0x00010000 +#define TX4927_CCFG_WR 0x00008000 +#define TX4927_CCFG_TOE 0x00004000 +#define TX4927_CCFG_PCIARB 0x00002000 +#define TX4927_CCFG_PCIDIVMODE_MASK 0x00001800 +#define TX4927_CCFG_PCIDIVMODE_2_5 0x00000000 +#define TX4927_CCFG_PCIDIVMODE_3 0x00000800 +#define TX4927_CCFG_PCIDIVMODE_5 0x00001000 +#define TX4927_CCFG_PCIDIVMODE_6 0x00001800 +#define TX4927_CCFG_SYSSP_MASK 0x000000c0 +#define TX4927_CCFG_ENDIAN 0x00000004 +#define TX4927_CCFG_HALT 0x00000002 +#define TX4927_CCFG_ACEHOLD 0x00000001 +#define TX4927_CCFG_W1CBITS (TX4927_CCFG_WDRST | TX4927_CCFG_BEOW) + +/* PCFG : Pin Configuration */ +#define TX4927_PCFG_SDCLKDLY_MASK 0x30000000 +#define TX4927_PCFG_SDCLKDLY(d) ((d)<<28) +#define TX4927_PCFG_SYSCLKEN 0x08000000 +#define TX4927_PCFG_SDCLKEN_ALL 0x07800000 +#define TX4927_PCFG_SDCLKEN(ch) (0x00800000<<(ch)) +#define TX4927_PCFG_PCICLKEN_ALL 0x003f0000 +#define TX4927_PCFG_PCICLKEN(ch) (0x00010000<<(ch)) +#define TX4927_PCFG_SEL2 0x00000200 +#define TX4927_PCFG_SEL1 0x00000100 +#define TX4927_PCFG_DMASEL_ALL 0x000000ff +#define TX4927_PCFG_DMASEL0_MASK 0x00000003 +#define TX4927_PCFG_DMASEL1_MASK 0x0000000c +#define TX4927_PCFG_DMASEL2_MASK 0x00000030 +#define TX4927_PCFG_DMASEL3_MASK 0x000000c0 +#define TX4927_PCFG_DMASEL0_DRQ0 0x00000000 +#define TX4927_PCFG_DMASEL0_SIO1 0x00000001 +#define TX4927_PCFG_DMASEL0_ACL0 0x00000002 +#define TX4927_PCFG_DMASEL0_ACL2 0x00000003 +#define TX4927_PCFG_DMASEL1_DRQ1 0x00000000 +#define TX4927_PCFG_DMASEL1_SIO1 0x00000004 +#define TX4927_PCFG_DMASEL1_ACL1 0x00000008 +#define TX4927_PCFG_DMASEL1_ACL3 0x0000000c +#define TX4927_PCFG_DMASEL2_DRQ2 0x00000000 /* SEL2=0 */ +#define TX4927_PCFG_DMASEL2_SIO0 0x00000010 /* SEL2=0 */ +#define TX4927_PCFG_DMASEL2_ACL1 0x00000000 /* SEL2=1 */ +#define TX4927_PCFG_DMASEL2_ACL2 0x00000020 /* SEL2=1 */ +#define TX4927_PCFG_DMASEL2_ACL0 0x00000030 /* SEL2=1 */ +#define TX4927_PCFG_DMASEL3_DRQ3 0x00000000 +#define TX4927_PCFG_DMASEL3_SIO0 0x00000040 +#define TX4927_PCFG_DMASEL3_ACL3 0x00000080 +#define TX4927_PCFG_DMASEL3_ACL1 0x000000c0 + +/* CLKCTR : Clock Control */ +#define TX4927_CLKCTR_ACLCKD 0x02000000 +#define TX4927_CLKCTR_PIOCKD 0x01000000 +#define TX4927_CLKCTR_DMACKD 0x00800000 +#define TX4927_CLKCTR_PCICKD 0x00400000 +#define TX4927_CLKCTR_TM0CKD 0x00100000 +#define TX4927_CLKCTR_TM1CKD 0x00080000 +#define TX4927_CLKCTR_TM2CKD 0x00040000 +#define TX4927_CLKCTR_SIO0CKD 0x00020000 +#define TX4927_CLKCTR_SIO1CKD 0x00010000 +#define TX4927_CLKCTR_ACLRST 0x00000200 +#define TX4927_CLKCTR_PIORST 0x00000100 +#define TX4927_CLKCTR_DMARST 0x00000080 +#define TX4927_CLKCTR_PCIRST 0x00000040 +#define TX4927_CLKCTR_TM0RST 0x00000010 +#define TX4927_CLKCTR_TM1RST 0x00000008 +#define TX4927_CLKCTR_TM2RST 0x00000004 +#define TX4927_CLKCTR_SIO0RST 0x00000002 +#define TX4927_CLKCTR_SIO1RST 0x00000001 + +#define tx4927_sdramcptr ((struct tx4927_sdramc_reg *)TX4927_SDRAMC_REG) +#define tx4927_pcicptr \ + ((struct tx4927_pcic_reg __iomem *)TX4927_PCIC_REG) +#define tx4927_ccfgptr \ + ((struct tx4927_ccfg_reg __iomem *)TX4927_CCFG_REG) +#define tx4927_ebuscptr ((struct tx4927_ebusc_reg *)TX4927_EBUSC_REG) + +/* utilities */ +static inline void txx9_clear64(__u64 __iomem *adr, __u64 bits) +{ +#ifdef CONFIG_32BIT + unsigned long flags; + local_irq_save(flags); +#endif + ____raw_writeq(____raw_readq(adr) & ~bits, adr); +#ifdef CONFIG_32BIT + local_irq_restore(flags); +#endif +} +static inline void txx9_set64(__u64 __iomem *adr, __u64 bits) +{ +#ifdef CONFIG_32BIT + unsigned long flags; + local_irq_save(flags); +#endif + ____raw_writeq(____raw_readq(adr) | bits, adr); +#ifdef CONFIG_32BIT + local_irq_restore(flags); +#endif +} + +/* These functions are not interrupt safe. */ +static inline void tx4927_ccfg_clear(__u64 bits) +{ + ____raw_writeq(____raw_readq(&tx4927_ccfgptr->ccfg) + & ~(TX4927_CCFG_W1CBITS | bits), + &tx4927_ccfgptr->ccfg); +} +static inline void tx4927_ccfg_set(__u64 bits) +{ + ____raw_writeq((____raw_readq(&tx4927_ccfgptr->ccfg) + & ~TX4927_CCFG_W1CBITS) | bits, + &tx4927_ccfgptr->ccfg); +} +static inline void tx4927_ccfg_change(__u64 change, __u64 new) +{ + ____raw_writeq((____raw_readq(&tx4927_ccfgptr->ccfg) + & ~(TX4927_CCFG_W1CBITS | change)) | + new, + &tx4927_ccfgptr->ccfg); +} + +int tx4927_report_pciclk(void); +int tx4927_pciclk66_setup(void); +void tx4927_irq_init(void); + +#endif /* __ASM_TXX9_TX4927_H */ diff --git a/include/asm-mips/txx9/tx4927pcic.h b/include/asm-mips/txx9/tx4927pcic.h new file mode 100644 index 000000000000..d61c3d09c4a2 --- /dev/null +++ b/include/asm-mips/txx9/tx4927pcic.h @@ -0,0 +1,199 @@ +/* + * include/asm-mips/txx9/tx4927pcic.h + * TX4927 PCI controller definitions. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_TXX9_TX4927PCIC_H +#define __ASM_TXX9_TX4927PCIC_H + +#include <linux/pci.h> + +struct tx4927_pcic_reg { + u32 pciid; + u32 pcistatus; + u32 pciccrev; + u32 pcicfg1; + u32 p2gm0plbase; /* +10 */ + u32 p2gm0pubase; + u32 p2gm1plbase; + u32 p2gm1pubase; + u32 p2gm2pbase; /* +20 */ + u32 p2giopbase; + u32 unused0; + u32 pcisid; + u32 unused1; /* +30 */ + u32 pcicapptr; + u32 unused2; + u32 pcicfg2; + u32 g2ptocnt; /* +40 */ + u32 unused3[15]; + u32 g2pstatus; /* +80 */ + u32 g2pmask; + u32 pcisstatus; + u32 pcimask; + u32 p2gcfg; /* +90 */ + u32 p2gstatus; + u32 p2gmask; + u32 p2gccmd; + u32 unused4[24]; /* +a0 */ + u32 pbareqport; /* +100 */ + u32 pbacfg; + u32 pbastatus; + u32 pbamask; + u32 pbabm; /* +110 */ + u32 pbacreq; + u32 pbacgnt; + u32 pbacstate; + u64 g2pmgbase[3]; /* +120 */ + u64 g2piogbase; + u32 g2pmmask[3]; /* +140 */ + u32 g2piomask; + u64 g2pmpbase[3]; /* +150 */ + u64 g2piopbase; + u32 pciccfg; /* +170 */ + u32 pcicstatus; + u32 pcicmask; + u32 unused5; + u64 p2gmgbase[3]; /* +180 */ + u64 p2giogbase; + u32 g2pcfgadrs; /* +1a0 */ + u32 g2pcfgdata; + u32 unused6[8]; + u32 g2pintack; + u32 g2pspc; + u32 unused7[12]; /* +1d0 */ + u64 pdmca; /* +200 */ + u64 pdmga; + u64 pdmpa; + u64 pdmctr; + u64 pdmcfg; /* +220 */ + u64 pdmsts; +}; + +/* bits for PCICMD */ +/* see PCI_COMMAND_XXX in linux/pci_regs.h */ + +/* bits for PCISTAT */ +/* see PCI_STATUS_XXX in linux/pci_regs.h */ + +/* bits for IOBA/MBA */ +/* see PCI_BASE_ADDRESS_XXX in linux/pci_regs.h */ + +/* bits for G2PSTATUS/G2PMASK */ +#define TX4927_PCIC_G2PSTATUS_ALL 0x00000003 +#define TX4927_PCIC_G2PSTATUS_TTOE 0x00000002 +#define TX4927_PCIC_G2PSTATUS_RTOE 0x00000001 + +/* bits for PCIMASK (see also PCI_STATUS_XXX in linux/pci_regs.h */ +#define TX4927_PCIC_PCISTATUS_ALL 0x0000f900 + +/* bits for PBACFG */ +#define TX4927_PCIC_PBACFG_FIXPA 0x00000008 +#define TX4927_PCIC_PBACFG_RPBA 0x00000004 +#define TX4927_PCIC_PBACFG_PBAEN 0x00000002 +#define TX4927_PCIC_PBACFG_BMCEN 0x00000001 + +/* bits for PBASTATUS/PBAMASK */ +#define TX4927_PCIC_PBASTATUS_ALL 0x00000001 +#define TX4927_PCIC_PBASTATUS_BM 0x00000001 + +/* bits for G2PMnGBASE */ +#define TX4927_PCIC_G2PMnGBASE_BSDIS 0x0000002000000000ULL +#define TX4927_PCIC_G2PMnGBASE_ECHG 0x0000001000000000ULL + +/* bits for G2PIOGBASE */ +#define TX4927_PCIC_G2PIOGBASE_BSDIS 0x0000002000000000ULL +#define TX4927_PCIC_G2PIOGBASE_ECHG 0x0000001000000000ULL + +/* bits for PCICSTATUS/PCICMASK */ +#define TX4927_PCIC_PCICSTATUS_ALL 0x000007b8 +#define TX4927_PCIC_PCICSTATUS_PME 0x00000400 +#define TX4927_PCIC_PCICSTATUS_TLB 0x00000200 +#define TX4927_PCIC_PCICSTATUS_NIB 0x00000100 +#define TX4927_PCIC_PCICSTATUS_ZIB 0x00000080 +#define TX4927_PCIC_PCICSTATUS_PERR 0x00000020 +#define TX4927_PCIC_PCICSTATUS_SERR 0x00000010 +#define TX4927_PCIC_PCICSTATUS_GBE 0x00000008 +#define TX4927_PCIC_PCICSTATUS_IWB 0x00000002 +#define TX4927_PCIC_PCICSTATUS_E2PDONE 0x00000001 + +/* bits for PCICCFG */ +#define TX4927_PCIC_PCICCFG_GBWC_MASK 0x0fff0000 +#define TX4927_PCIC_PCICCFG_HRST 0x00000800 +#define TX4927_PCIC_PCICCFG_SRST 0x00000400 +#define TX4927_PCIC_PCICCFG_IRBER 0x00000200 +#define TX4927_PCIC_PCICCFG_G2PMEN(ch) (0x00000100>>(ch)) +#define TX4927_PCIC_PCICCFG_G2PM0EN 0x00000100 +#define TX4927_PCIC_PCICCFG_G2PM1EN 0x00000080 +#define TX4927_PCIC_PCICCFG_G2PM2EN 0x00000040 +#define TX4927_PCIC_PCICCFG_G2PIOEN 0x00000020 +#define TX4927_PCIC_PCICCFG_TCAR 0x00000010 +#define TX4927_PCIC_PCICCFG_ICAEN 0x00000008 + +/* bits for P2GMnGBASE */ +#define TX4927_PCIC_P2GMnGBASE_TMEMEN 0x0000004000000000ULL +#define TX4927_PCIC_P2GMnGBASE_TBSDIS 0x0000002000000000ULL +#define TX4927_PCIC_P2GMnGBASE_TECHG 0x0000001000000000ULL + +/* bits for P2GIOGBASE */ +#define TX4927_PCIC_P2GIOGBASE_TIOEN 0x0000004000000000ULL +#define TX4927_PCIC_P2GIOGBASE_TBSDIS 0x0000002000000000ULL +#define TX4927_PCIC_P2GIOGBASE_TECHG 0x0000001000000000ULL + +#define TX4927_PCIC_IDSEL_AD_TO_SLOT(ad) ((ad) - 11) +#define TX4927_PCIC_MAX_DEVNU TX4927_PCIC_IDSEL_AD_TO_SLOT(32) + +/* bits for PDMCFG */ +#define TX4927_PCIC_PDMCFG_RSTFIFO 0x00200000 +#define TX4927_PCIC_PDMCFG_EXFER 0x00100000 +#define TX4927_PCIC_PDMCFG_REQDLY_MASK 0x00003800 +#define TX4927_PCIC_PDMCFG_REQDLY_NONE (0 << 11) +#define TX4927_PCIC_PDMCFG_REQDLY_16 (1 << 11) +#define TX4927_PCIC_PDMCFG_REQDLY_32 (2 << 11) +#define TX4927_PCIC_PDMCFG_REQDLY_64 (3 << 11) +#define TX4927_PCIC_PDMCFG_REQDLY_128 (4 << 11) +#define TX4927_PCIC_PDMCFG_REQDLY_256 (5 << 11) +#define TX4927_PCIC_PDMCFG_REQDLY_512 (6 << 11) +#define TX4927_PCIC_PDMCFG_REQDLY_1024 (7 << 11) +#define TX4927_PCIC_PDMCFG_ERRIE 0x00000400 +#define TX4927_PCIC_PDMCFG_NCCMPIE 0x00000200 +#define TX4927_PCIC_PDMCFG_NTCMPIE 0x00000100 +#define TX4927_PCIC_PDMCFG_CHNEN 0x00000080 +#define TX4927_PCIC_PDMCFG_XFRACT 0x00000040 +#define TX4927_PCIC_PDMCFG_BSWAP 0x00000020 +#define TX4927_PCIC_PDMCFG_XFRSIZE_MASK 0x0000000c +#define TX4927_PCIC_PDMCFG_XFRSIZE_1DW 0x00000000 +#define TX4927_PCIC_PDMCFG_XFRSIZE_1QW 0x00000004 +#define TX4927_PCIC_PDMCFG_XFRSIZE_4QW 0x00000008 +#define TX4927_PCIC_PDMCFG_XFRDIRC 0x00000002 +#define TX4927_PCIC_PDMCFG_CHRST 0x00000001 + +/* bits for PDMSTS */ +#define TX4927_PCIC_PDMSTS_REQCNT_MASK 0x3f000000 +#define TX4927_PCIC_PDMSTS_FIFOCNT_MASK 0x00f00000 +#define TX4927_PCIC_PDMSTS_FIFOWP_MASK 0x000c0000 +#define TX4927_PCIC_PDMSTS_FIFORP_MASK 0x00030000 +#define TX4927_PCIC_PDMSTS_ERRINT 0x00000800 +#define TX4927_PCIC_PDMSTS_DONEINT 0x00000400 +#define TX4927_PCIC_PDMSTS_CHNEN 0x00000200 +#define TX4927_PCIC_PDMSTS_XFRACT 0x00000100 +#define TX4927_PCIC_PDMSTS_ACCMP 0x00000080 +#define TX4927_PCIC_PDMSTS_NCCMP 0x00000040 +#define TX4927_PCIC_PDMSTS_NTCMP 0x00000020 +#define TX4927_PCIC_PDMSTS_CFGERR 0x00000008 +#define TX4927_PCIC_PDMSTS_PCIERR 0x00000004 +#define TX4927_PCIC_PDMSTS_CHNERR 0x00000002 +#define TX4927_PCIC_PDMSTS_DATAERR 0x00000001 +#define TX4927_PCIC_PDMSTS_ALL_CMP 0x000000e0 +#define TX4927_PCIC_PDMSTS_ALL_ERR 0x0000000f + +struct tx4927_pcic_reg __iomem *get_tx4927_pcicptr( + struct pci_controller *channel); +void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr, + struct pci_controller *channel, int extarb); +void tx4927_report_pcic_status(void); + +#endif /* __ASM_TXX9_TX4927PCIC_H */ diff --git a/include/asm-mips/tx4938/tx4938.h b/include/asm-mips/txx9/tx4938.h index e8807f5c61e9..12de68a4c10a 100644 --- a/include/asm-mips/tx4938/tx4938.h +++ b/include/asm-mips/txx9/tx4938.h @@ -1,5 +1,4 @@ /* - * linux/include/asm-mips/tx4938/tx4938.h * Definitions for TX4937/TX4938 * Copyright (C) 2000-2001 Toshiba Corporation * @@ -10,17 +9,15 @@ * * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) */ -#ifndef __ASM_TX_BOARDS_TX4938_H -#define __ASM_TX_BOARDS_TX4938_H +#ifndef __ASM_TXX9_TX4938_H +#define __ASM_TXX9_TX4938_H + +/* some controllers are compatible with 4927 */ +#include <asm/txx9/tx4927.h> #define tx4938_read_nfmc(addr) (*(volatile unsigned int *)(addr)) #define tx4938_write_nfmc(b, addr) (*(volatile unsigned int *)(addr)) = (b) -#define TX4938_NR_IRQ_LOCAL TX4938_IRQ_PIC_BEG - -#define TX4938_IRQ_IRC_PCIC (TX4938_NR_IRQ_LOCAL + TX4938_IR_PCIC) -#define TX4938_IRQ_IRC_PCIERR (TX4938_NR_IRQ_LOCAL + TX4938_IR_PCIERR) - #define TX4938_PCIIO_0 0x10000000 #define TX4938_PCIIO_1 0x01010000 #define TX4938_PCIMEM_0 0x08000000 @@ -52,9 +49,6 @@ #define TX4938_ACLC_REG (TX4938_REG_BASE + 0xf700) #define TX4938_SPI_REG (TX4938_REG_BASE + 0xf800) -#ifdef __ASSEMBLY__ -#define _CONST64(c) c -#else #define _CONST64(c) c##ull #include <asm/byteorder.h> @@ -114,68 +108,6 @@ struct tx4938_dma_reg { endian_def_l2(unused0, mcr); }; -struct tx4938_pcic_reg { - volatile unsigned long pciid; - volatile unsigned long pcistatus; - volatile unsigned long pciccrev; - volatile unsigned long pcicfg1; - volatile unsigned long p2gm0plbase; /* +10 */ - volatile unsigned long p2gm0pubase; - volatile unsigned long p2gm1plbase; - volatile unsigned long p2gm1pubase; - volatile unsigned long p2gm2pbase; /* +20 */ - volatile unsigned long p2giopbase; - volatile unsigned long unused0; - volatile unsigned long pcisid; - volatile unsigned long unused1; /* +30 */ - volatile unsigned long pcicapptr; - volatile unsigned long unused2; - volatile unsigned long pcicfg2; - volatile unsigned long g2ptocnt; /* +40 */ - volatile unsigned long unused3[15]; - volatile unsigned long g2pstatus; /* +80 */ - volatile unsigned long g2pmask; - volatile unsigned long pcisstatus; - volatile unsigned long pcimask; - volatile unsigned long p2gcfg; /* +90 */ - volatile unsigned long p2gstatus; - volatile unsigned long p2gmask; - volatile unsigned long p2gccmd; - volatile unsigned long unused4[24]; /* +a0 */ - volatile unsigned long pbareqport; /* +100 */ - volatile unsigned long pbacfg; - volatile unsigned long pbastatus; - volatile unsigned long pbamask; - volatile unsigned long pbabm; /* +110 */ - volatile unsigned long pbacreq; - volatile unsigned long pbacgnt; - volatile unsigned long pbacstate; - volatile unsigned long long g2pmgbase[3]; /* +120 */ - volatile unsigned long long g2piogbase; - volatile unsigned long g2pmmask[3]; /* +140 */ - volatile unsigned long g2piomask; - volatile unsigned long long g2pmpbase[3]; /* +150 */ - volatile unsigned long long g2piopbase; - volatile unsigned long pciccfg; /* +170 */ - volatile unsigned long pcicstatus; - volatile unsigned long pcicmask; - volatile unsigned long unused5; - volatile unsigned long long p2gmgbase[3]; /* +180 */ - volatile unsigned long long p2giogbase; - volatile unsigned long g2pcfgadrs; /* +1a0 */ - volatile unsigned long g2pcfgdata; - volatile unsigned long unused6[8]; - volatile unsigned long g2pintack; - volatile unsigned long g2pspc; - volatile unsigned long unused7[12]; /* +1d0 */ - volatile unsigned long long pdmca; /* +200 */ - volatile unsigned long long pdmga; - volatile unsigned long long pdmpa; - volatile unsigned long long pdmctr; - volatile unsigned long long pdmcfg; /* +220 */ - volatile unsigned long long pdmsts; -}; - struct tx4938_aclc_reg { volatile unsigned long acctlen; volatile unsigned long acctldis; @@ -263,18 +195,18 @@ struct tx4938_sramc_reg { }; struct tx4938_ccfg_reg { - volatile unsigned long long ccfg; - volatile unsigned long long crir; - volatile unsigned long long pcfg; - volatile unsigned long long tear; - volatile unsigned long long clkctr; - volatile unsigned long long unused0; - volatile unsigned long long garbc; - volatile unsigned long long unused1; - volatile unsigned long long unused2; - volatile unsigned long long ramp; - volatile unsigned long long unused3; - volatile unsigned long long jmpadr; + u64 ccfg; + u64 crir; + u64 pcfg; + u64 toea; + u64 clkctr; + u64 unused0; + u64 garbc; + u64 unused1; + u64 unused2; + u64 ramp; + u64 unused3; + u64 jmpadr; }; #undef endian_def_l2 @@ -283,8 +215,6 @@ struct tx4938_ccfg_reg { #undef endian_def_b2s #undef endian_def_b4 -#endif /* __ASSEMBLY__ */ - /* * NDFMC */ @@ -336,6 +266,8 @@ struct tx4938_ccfg_reg { #define TX4938_IR_ETH0 TX4938_IR_INT(4) #define TX4938_IR_ETH1 TX4938_IR_INT(3) +#define TX4938_IRC_INT 2 /* IP[2] in Status register */ + /* * CCFG */ @@ -361,7 +293,7 @@ struct tx4938_ccfg_reg { #define TX4938_CCFG_BEOW 0x00010000 #define TX4938_CCFG_WR 0x00008000 #define TX4938_CCFG_TOE 0x00004000 -#define TX4938_CCFG_PCIXARB 0x00002000 +#define TX4938_CCFG_PCIARB 0x00002000 #define TX4938_CCFG_PCIDIVMODE_MASK 0x00001c00 #define TX4938_CCFG_PCIDIVMODE_4 (0x1 << 10) #define TX4938_CCFG_PCIDIVMODE_4_5 (0x3 << 10) @@ -437,110 +369,6 @@ struct tx4938_ccfg_reg { #define TX4938_CLKCTR_SIO0RST 0x00000002 #define TX4938_CLKCTR_SIO1RST 0x00000001 -/* bits for G2PSTATUS/G2PMASK */ -#define TX4938_PCIC_G2PSTATUS_ALL 0x00000003 -#define TX4938_PCIC_G2PSTATUS_TTOE 0x00000002 -#define TX4938_PCIC_G2PSTATUS_RTOE 0x00000001 - -/* bits for PCIMASK (see also PCI_STATUS_XXX in linux/pci.h */ -#define TX4938_PCIC_PCISTATUS_ALL 0x0000f900 - -/* bits for PBACFG */ -#define TX4938_PCIC_PBACFG_FIXPA 0x00000008 -#define TX4938_PCIC_PBACFG_RPBA 0x00000004 -#define TX4938_PCIC_PBACFG_PBAEN 0x00000002 -#define TX4938_PCIC_PBACFG_BMCEN 0x00000001 - -/* bits for G2PMnGBASE */ -#define TX4938_PCIC_G2PMnGBASE_BSDIS _CONST64(0x0000002000000000) -#define TX4938_PCIC_G2PMnGBASE_ECHG _CONST64(0x0000001000000000) - -/* bits for G2PIOGBASE */ -#define TX4938_PCIC_G2PIOGBASE_BSDIS _CONST64(0x0000002000000000) -#define TX4938_PCIC_G2PIOGBASE_ECHG _CONST64(0x0000001000000000) - -/* bits for PCICSTATUS/PCICMASK */ -#define TX4938_PCIC_PCICSTATUS_ALL 0x000007b8 -#define TX4938_PCIC_PCICSTATUS_PME 0x00000400 -#define TX4938_PCIC_PCICSTATUS_TLB 0x00000200 -#define TX4938_PCIC_PCICSTATUS_NIB 0x00000100 -#define TX4938_PCIC_PCICSTATUS_ZIB 0x00000080 -#define TX4938_PCIC_PCICSTATUS_PERR 0x00000020 -#define TX4938_PCIC_PCICSTATUS_SERR 0x00000010 -#define TX4938_PCIC_PCICSTATUS_GBE 0x00000008 -#define TX4938_PCIC_PCICSTATUS_IWB 0x00000002 -#define TX4938_PCIC_PCICSTATUS_E2PDONE 0x00000001 - -/* bits for PCICCFG */ -#define TX4938_PCIC_PCICCFG_GBWC_MASK 0x0fff0000 -#define TX4938_PCIC_PCICCFG_HRST 0x00000800 -#define TX4938_PCIC_PCICCFG_SRST 0x00000400 -#define TX4938_PCIC_PCICCFG_IRBER 0x00000200 -#define TX4938_PCIC_PCICCFG_G2PMEN(ch) (0x00000100>>(ch)) -#define TX4938_PCIC_PCICCFG_G2PM0EN 0x00000100 -#define TX4938_PCIC_PCICCFG_G2PM1EN 0x00000080 -#define TX4938_PCIC_PCICCFG_G2PM2EN 0x00000040 -#define TX4938_PCIC_PCICCFG_G2PIOEN 0x00000020 -#define TX4938_PCIC_PCICCFG_TCAR 0x00000010 -#define TX4938_PCIC_PCICCFG_ICAEN 0x00000008 - -/* bits for P2GMnGBASE */ -#define TX4938_PCIC_P2GMnGBASE_TMEMEN _CONST64(0x0000004000000000) -#define TX4938_PCIC_P2GMnGBASE_TBSDIS _CONST64(0x0000002000000000) -#define TX4938_PCIC_P2GMnGBASE_TECHG _CONST64(0x0000001000000000) - -/* bits for P2GIOGBASE */ -#define TX4938_PCIC_P2GIOGBASE_TIOEN _CONST64(0x0000004000000000) -#define TX4938_PCIC_P2GIOGBASE_TBSDIS _CONST64(0x0000002000000000) -#define TX4938_PCIC_P2GIOGBASE_TECHG _CONST64(0x0000001000000000) - -#define TX4938_PCIC_IDSEL_AD_TO_SLOT(ad) ((ad) - 11) -#define TX4938_PCIC_MAX_DEVNU TX4938_PCIC_IDSEL_AD_TO_SLOT(32) - -/* bits for PDMCFG */ -#define TX4938_PCIC_PDMCFG_RSTFIFO 0x00200000 -#define TX4938_PCIC_PDMCFG_EXFER 0x00100000 -#define TX4938_PCIC_PDMCFG_REQDLY_MASK 0x00003800 -#define TX4938_PCIC_PDMCFG_REQDLY_NONE (0 << 11) -#define TX4938_PCIC_PDMCFG_REQDLY_16 (1 << 11) -#define TX4938_PCIC_PDMCFG_REQDLY_32 (2 << 11) -#define TX4938_PCIC_PDMCFG_REQDLY_64 (3 << 11) -#define TX4938_PCIC_PDMCFG_REQDLY_128 (4 << 11) -#define TX4938_PCIC_PDMCFG_REQDLY_256 (5 << 11) -#define TX4938_PCIC_PDMCFG_REQDLY_512 (6 << 11) -#define TX4938_PCIC_PDMCFG_REQDLY_1024 (7 << 11) -#define TX4938_PCIC_PDMCFG_ERRIE 0x00000400 -#define TX4938_PCIC_PDMCFG_NCCMPIE 0x00000200 -#define TX4938_PCIC_PDMCFG_NTCMPIE 0x00000100 -#define TX4938_PCIC_PDMCFG_CHNEN 0x00000080 -#define TX4938_PCIC_PDMCFG_XFRACT 0x00000040 -#define TX4938_PCIC_PDMCFG_BSWAP 0x00000020 -#define TX4938_PCIC_PDMCFG_XFRSIZE_MASK 0x0000000c -#define TX4938_PCIC_PDMCFG_XFRSIZE_1DW 0x00000000 -#define TX4938_PCIC_PDMCFG_XFRSIZE_1QW 0x00000004 -#define TX4938_PCIC_PDMCFG_XFRSIZE_4QW 0x00000008 -#define TX4938_PCIC_PDMCFG_XFRDIRC 0x00000002 -#define TX4938_PCIC_PDMCFG_CHRST 0x00000001 - -/* bits for PDMSTS */ -#define TX4938_PCIC_PDMSTS_REQCNT_MASK 0x3f000000 -#define TX4938_PCIC_PDMSTS_FIFOCNT_MASK 0x00f00000 -#define TX4938_PCIC_PDMSTS_FIFOWP_MASK 0x000c0000 -#define TX4938_PCIC_PDMSTS_FIFORP_MASK 0x00030000 -#define TX4938_PCIC_PDMSTS_ERRINT 0x00000800 -#define TX4938_PCIC_PDMSTS_DONEINT 0x00000400 -#define TX4938_PCIC_PDMSTS_CHNEN 0x00000200 -#define TX4938_PCIC_PDMSTS_XFRACT 0x00000100 -#define TX4938_PCIC_PDMSTS_ACCMP 0x00000080 -#define TX4938_PCIC_PDMSTS_NCCMP 0x00000040 -#define TX4938_PCIC_PDMSTS_NTCMP 0x00000020 -#define TX4938_PCIC_PDMSTS_CFGERR 0x00000008 -#define TX4938_PCIC_PDMSTS_PCIERR 0x00000004 -#define TX4938_PCIC_PDMSTS_CHNERR 0x00000002 -#define TX4938_PCIC_PDMSTS_DATAERR 0x00000001 -#define TX4938_PCIC_PDMSTS_ALL_CMP 0x000000e0 -#define TX4938_PCIC_PDMSTS_ALL_ERR 0x0000000f - /* * DMA */ @@ -596,15 +424,15 @@ struct tx4938_ccfg_reg { #define TX4938_DMA_CSR_DESERR 0x00000002 #define TX4938_DMA_CSR_SORERR 0x00000001 -#ifndef __ASSEMBLY__ - #define tx4938_sdramcptr ((struct tx4938_sdramc_reg *)TX4938_SDRAMC_REG) #define tx4938_ebuscptr ((struct tx4938_ebusc_reg *)TX4938_EBUSC_REG) #define tx4938_dmaptr(ch) ((struct tx4938_dma_reg *)TX4938_DMA_REG(ch)) #define tx4938_ndfmcptr ((struct tx4938_ndfmc_reg *)TX4938_NDFMC_REG) -#define tx4938_pcicptr ((struct tx4938_pcic_reg *)TX4938_PCIC_REG) -#define tx4938_pcic1ptr ((struct tx4938_pcic_reg *)TX4938_PCIC1_REG) -#define tx4938_ccfgptr ((struct tx4938_ccfg_reg *)TX4938_CCFG_REG) +#define tx4938_pcicptr tx4927_pcicptr +#define tx4938_pcic1ptr \ + ((struct tx4927_pcic_reg __iomem *)TX4938_PCIC1_REG) +#define tx4938_ccfgptr \ + ((struct tx4938_ccfg_reg __iomem *)TX4938_CCFG_REG) #define tx4938_sioptr(ch) ((struct tx4938_sio_reg *)TX4938_SIO_REG(ch)) #define tx4938_pioptr ((struct txx9_pio_reg __iomem *)TX4938_PIO_REG) #define tx4938_aclcptr ((struct tx4938_aclc_reg *)TX4938_ACLC_REG) @@ -612,17 +440,26 @@ struct tx4938_ccfg_reg { #define tx4938_sramcptr ((struct tx4938_sramc_reg *)TX4938_SRAMC_REG) -#define TX4938_REV_MAJ_MIN() ((unsigned long)tx4938_ccfgptr->crir & 0x00ff) -#define TX4938_REV_PCODE() ((unsigned long)tx4938_ccfgptr->crir >> 16) +#define TX4938_REV_PCODE() \ + ((__u32)__raw_readq(&tx4938_ccfgptr->crir) >> 16) + +#define tx4938_ccfg_clear(bits) tx4927_ccfg_clear(bits) +#define tx4938_ccfg_set(bits) tx4927_ccfg_set(bits) +#define tx4938_ccfg_change(change, new) tx4927_ccfg_change(change, new) #define TX4938_SDRAMC_BA(ch) ((tx4938_sdramcptr->cr[ch] >> 49) << 21) #define TX4938_SDRAMC_SIZE(ch) (((tx4938_sdramcptr->cr[ch] >> 33) + 1) << 21) +#define TX4938_EBUSC_CR(ch) __raw_readq(&tx4938_ebuscptr->cr[(ch)]) #define TX4938_EBUSC_BA(ch) ((tx4938_ebuscptr->cr[ch] >> 48) << 20) #define TX4938_EBUSC_SIZE(ch) \ (0x00100000 << ((unsigned long)(tx4938_ebuscptr->cr[ch] >> 8) & 0xf)) - -#endif /* !__ASSEMBLY__ */ +int tx4938_report_pciclk(void); +void tx4938_report_pci1clk(void); +int tx4938_pciclk66_setup(void); +struct pci_dev; +int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot); +void tx4938_irq_init(void); #endif diff --git a/include/asm-mips/jmr3927/txx927.h b/include/asm-mips/txx9/txx927.h index 25dcf2feb095..97dd7ad1a890 100644 --- a/include/asm-mips/jmr3927/txx927.h +++ b/include/asm-mips/txx9/txx927.h @@ -7,8 +7,8 @@ * * Copyright (C) 2000 Toshiba Corporation */ -#ifndef __ASM_TXX927_H -#define __ASM_TXX927_H +#ifndef __ASM_TXX9_TXX927_H +#define __ASM_TXX9_TXX927_H struct txx927_sio_reg { volatile unsigned long lcr; @@ -118,4 +118,4 @@ struct txx927_sio_reg { * PIO */ -#endif /* __ASM_TXX927_H */ +#endif /* __ASM_TXX9_TXX927_H */ diff --git a/include/asm-mips/vr41xx/cmbvr4133.h b/include/asm-mips/vr41xx/cmbvr4133.h deleted file mode 100644 index 42300037d593..000000000000 --- a/include/asm-mips/vr41xx/cmbvr4133.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * include/asm-mips/vr41xx/cmbvr4133.h - * - * Include file for NEC CMB-VR4133. - * - * Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com> and - * Jun Sun <jsun@mvista.com, or source@mvista.com> and - * Alex Sapkov <asapkov@ru.mvista.com> - * - * 2002-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __NEC_CMBVR4133_H -#define __NEC_CMBVR4133_H - -#include <asm/vr41xx/irq.h> - -/* - * General-Purpose I/O Pin Number - */ -#define CMBVR41XX_INTA_PIN 1 -#define CMBVR41XX_INTB_PIN 1 -#define CMBVR41XX_INTC_PIN 3 -#define CMBVR41XX_INTD_PIN 1 -#define CMBVR41XX_INTE_PIN 1 - -/* - * Interrupt Number - */ -#define CMBVR41XX_INTA_IRQ GIU_IRQ(CMBVR41XX_INTA_PIN) -#define CMBVR41XX_INTB_IRQ GIU_IRQ(CMBVR41XX_INTB_PIN) -#define CMBVR41XX_INTC_IRQ GIU_IRQ(CMBVR41XX_INTC_PIN) -#define CMBVR41XX_INTD_IRQ GIU_IRQ(CMBVR41XX_INTD_PIN) -#define CMBVR41XX_INTE_IRQ GIU_IRQ(CMBVR41XX_INTE_PIN) - -#define I8259A_IRQ_BASE 72 -#define I8259_IRQ(x) (I8259A_IRQ_BASE + (x)) -#define TIMER_IRQ I8259_IRQ(0) -#define KEYBOARD_IRQ I8259_IRQ(1) -#define I8259_SLAVE_IRQ I8259_IRQ(2) -#define UART3_IRQ I8259_IRQ(3) -#define UART1_IRQ I8259_IRQ(4) -#define UART2_IRQ I8259_IRQ(5) -#define FDC_IRQ I8259_IRQ(6) -#define PARPORT_IRQ I8259_IRQ(7) -#define RTC_IRQ I8259_IRQ(8) -#define USB_IRQ I8259_IRQ(9) -#define I8259_INTA_IRQ I8259_IRQ(10) -#define AUDIO_IRQ I8259_IRQ(11) -#define AUX_IRQ I8259_IRQ(12) -#define IDE_PRIMARY_IRQ I8259_IRQ(14) -#define IDE_SECONDARY_IRQ I8259_IRQ(15) - -#endif /* __NEC_CMBVR4133_H */ diff --git a/include/asm-powerpc/Kbuild b/include/asm-powerpc/Kbuild index bca352e033c3..04ce8f8a2ee7 100644 --- a/include/asm-powerpc/Kbuild +++ b/include/asm-powerpc/Kbuild @@ -2,7 +2,6 @@ include include/asm-generic/Kbuild.asm header-y += auxvec.h header-y += ioctls.h -header-y += mman.h header-y += sembuf.h header-y += siginfo.h header-y += stat.h @@ -23,7 +22,6 @@ header-y += sigcontext.h header-y += statfs.h header-y += ps3fb.h -unifdef-y += asm-compat.h unifdef-y += bootx.h unifdef-y += byteorder.h unifdef-y += cputable.h diff --git a/include/asm-powerpc/asm-compat.h b/include/asm-powerpc/asm-compat.h index c19e7367fce6..8ec2e1da68bf 100644 --- a/include/asm-powerpc/asm-compat.h +++ b/include/asm-powerpc/asm-compat.h @@ -15,57 +15,6 @@ #endif -/* - * Feature section common macros - * - * Note that the entries now contain offsets between the table entry - * and the code rather than absolute code pointers in order to be - * useable with the vdso shared library. There is also an assumption - * that values will be negative, that is, the fixup table has to be - * located after the code it fixes up. - */ -#ifdef CONFIG_PPC64 -#ifdef __powerpc64__ -/* 64 bits kernel, 64 bits code */ -#define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect) \ -99: \ - .section sect,"a"; \ - .align 3; \ -98: \ - .llong msk; \ - .llong val; \ - .llong label##b-98b; \ - .llong 99b-98b; \ - .previous -#else /* __powerpc64__ */ -/* 64 bits kernel, 32 bits code (ie. vdso32) */ -#define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect) \ -99: \ - .section sect,"a"; \ - .align 3; \ -98: \ - .llong msk; \ - .llong val; \ - .long 0xffffffff; \ - .long label##b-98b; \ - .long 0xffffffff; \ - .long 99b-98b; \ - .previous -#endif /* !__powerpc64__ */ -#else /* CONFIG_PPC64 */ -/* 32 bits kernel, 32 bits code */ -#define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect) \ -99: \ - .section sect,"a"; \ - .align 2; \ -98: \ - .long msk; \ - .long val; \ - .long label##b-98b; \ - .long 99b-98b; \ - .previous -#endif /* !CONFIG_PPC64 */ - #ifdef __powerpc64__ /* operations for longs and pointers */ diff --git a/include/asm-powerpc/cache.h b/include/asm-powerpc/cache.h index 53507046a1b1..81de6eb3455d 100644 --- a/include/asm-powerpc/cache.h +++ b/include/asm-powerpc/cache.h @@ -8,6 +8,9 @@ #if defined(CONFIG_8xx) || defined(CONFIG_403GCX) #define L1_CACHE_SHIFT 4 #define MAX_COPY_PREFETCH 1 +#elif defined(CONFIG_PPC_E500MC) +#define L1_CACHE_SHIFT 6 +#define MAX_COPY_PREFETCH 4 #elif defined(CONFIG_PPC32) #define L1_CACHE_SHIFT 5 #define MAX_COPY_PREFETCH 4 diff --git a/include/asm-powerpc/code-patching.h b/include/asm-powerpc/code-patching.h new file mode 100644 index 000000000000..107d9b915e33 --- /dev/null +++ b/include/asm-powerpc/code-patching.h @@ -0,0 +1,54 @@ +#ifndef _ASM_POWERPC_CODE_PATCHING_H +#define _ASM_POWERPC_CODE_PATCHING_H + +/* + * Copyright 2008, Michael Ellerman, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <asm/types.h> + +#define PPC_NOP_INSTR 0x60000000 +#define PPC_LWSYNC_INSTR 0x7c2004ac + +/* Flags for create_branch: + * "b" == create_branch(addr, target, 0); + * "ba" == create_branch(addr, target, BRANCH_ABSOLUTE); + * "bl" == create_branch(addr, target, BRANCH_SET_LINK); + * "bla" == create_branch(addr, target, BRANCH_ABSOLUTE | BRANCH_SET_LINK); + */ +#define BRANCH_SET_LINK 0x1 +#define BRANCH_ABSOLUTE 0x2 + +unsigned int create_branch(const unsigned int *addr, + unsigned long target, int flags); +unsigned int create_cond_branch(const unsigned int *addr, + unsigned long target, int flags); +void patch_branch(unsigned int *addr, unsigned long target, int flags); +void patch_instruction(unsigned int *addr, unsigned int instr); + +int instr_is_relative_branch(unsigned int instr); +int instr_is_branch_to_addr(const unsigned int *instr, unsigned long addr); +unsigned long branch_target(const unsigned int *instr); +unsigned int translate_branch(const unsigned int *dest, + const unsigned int *src); + +static inline unsigned long ppc_function_entry(void *func) +{ +#ifdef CONFIG_PPC64 + /* + * On PPC64 the function pointer actually points to the function's + * descriptor. The first entry in the descriptor is the address + * of the function text. + */ + return ((func_descr_t *)func)->entry; +#else + return (unsigned long)func; +#endif +} + +#endif /* _ASM_POWERPC_CODE_PATCHING_H */ diff --git a/include/asm-powerpc/cpm.h b/include/asm-powerpc/cpm.h index ede38ffe466a..63a55337c2de 100644 --- a/include/asm-powerpc/cpm.h +++ b/include/asm-powerpc/cpm.h @@ -96,6 +96,7 @@ unsigned long cpm_muram_alloc(unsigned long size, unsigned long align); int cpm_muram_free(unsigned long offset); unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size); void __iomem *cpm_muram_addr(unsigned long offset); +unsigned long cpm_muram_offset(void __iomem *addr); dma_addr_t cpm_muram_dma(void __iomem *addr); int cpm_command(u32 command, u8 opcode); diff --git a/include/asm-powerpc/cpm1.h b/include/asm-powerpc/cpm1.h index 3df439678006..2ff798744c1d 100644 --- a/include/asm-powerpc/cpm1.h +++ b/include/asm-powerpc/cpm1.h @@ -42,35 +42,15 @@ #define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4)) -#ifndef CONFIG_PPC_CPM_NEW_BINDING -/* The dual ported RAM is multi-functional. Some areas can be (and are - * being) used for microcode. There is an area that can only be used - * as data ram for buffer descriptors, which is all we use right now. - * Currently the first 512 and last 256 bytes are used for microcode. - */ -#define CPM_DATAONLY_BASE ((uint)0x0800) -#define CPM_DATAONLY_SIZE ((uint)0x0700) -#define CPM_DP_NOSPACE ((uint)0x7fffffff) -#endif - /* Export the base address of the communication processor registers * and dual port ram. */ extern cpm8xx_t __iomem *cpmp; /* Pointer to comm processor */ -#ifdef CONFIG_PPC_CPM_NEW_BINDING #define cpm_dpalloc cpm_muram_alloc #define cpm_dpfree cpm_muram_free #define cpm_dpram_addr cpm_muram_addr #define cpm_dpram_phys cpm_muram_dma -#else -extern unsigned long cpm_dpalloc(uint size, uint align); -extern int cpm_dpfree(unsigned long offset); -extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align); -extern void cpm_dpdump(void); -extern void *cpm_dpram_addr(unsigned long offset); -extern uint cpm_dpram_phys(u8 *addr); -#endif extern void cpm_setbrg(uint brg, uint rate); diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h index 4c85ed9cd43f..2c7fd9cee291 100644 --- a/include/asm-powerpc/cpm2.h +++ b/include/asm-powerpc/cpm2.h @@ -78,24 +78,6 @@ #define mk_cr_cmd(PG, SBC, MCN, OP) \ ((PG << 26) | (SBC << 21) | (MCN << 6) | OP) -#ifndef CONFIG_PPC_CPM_NEW_BINDING -/* Dual Port RAM addresses. The first 16K is available for almost - * any CPM use, so we put the BDs there. The first 128 bytes are - * used for SMC1 and SMC2 parameter RAM, so we start allocating - * BDs above that. All of this must change when we start - * downloading RAM microcode. - */ -#define CPM_DATAONLY_BASE ((uint)128) -#define CPM_DP_NOSPACE ((uint)0x7fffffff) -#if defined(CONFIG_8272) || defined(CONFIG_MPC8555) -#define CPM_DATAONLY_SIZE ((uint)(8 * 1024) - CPM_DATAONLY_BASE) -#define CPM_FCC_SPECIAL_BASE ((uint)0x00009000) -#else -#define CPM_DATAONLY_SIZE ((uint)(16 * 1024) - CPM_DATAONLY_BASE) -#define CPM_FCC_SPECIAL_BASE ((uint)0x0000b000) -#endif -#endif - /* The number of pages of host memory we allocate for CPM. This is * done early in kernel initialization to get physically contiguous * pages. @@ -107,17 +89,9 @@ */ extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */ -#ifdef CONFIG_PPC_CPM_NEW_BINDING #define cpm_dpalloc cpm_muram_alloc #define cpm_dpfree cpm_muram_free #define cpm_dpram_addr cpm_muram_addr -#else -extern unsigned long cpm_dpalloc(uint size, uint align); -extern int cpm_dpfree(unsigned long offset); -extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align); -extern void cpm_dpdump(void); -extern void *cpm_dpram_addr(unsigned long offset); -#endif extern void cpm_setbrg(uint brg, uint rate); extern void cpm2_fastbrg(uint brg, uint rate, int div16); diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index 1e79673b7316..2a3e9075a5a0 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -1,8 +1,6 @@ #ifndef __ASM_POWERPC_CPUTABLE_H #define __ASM_POWERPC_CPUTABLE_H -#include <asm/asm-compat.h> - #define PPC_FEATURE_32 0x80000000 #define PPC_FEATURE_64 0x40000000 #define PPC_FEATURE_601_INSTR 0x20000000 @@ -26,11 +24,20 @@ #define PPC_FEATURE_PA6T 0x00000800 #define PPC_FEATURE_HAS_DFP 0x00000400 #define PPC_FEATURE_POWER6_EXT 0x00000200 +#define PPC_FEATURE_ARCH_2_06 0x00000100 +#define PPC_FEATURE_HAS_VSX 0x00000080 + +#define PPC_FEATURE_PSERIES_PERFMON_COMPAT \ + 0x00000040 #define PPC_FEATURE_TRUE_LE 0x00000002 #define PPC_FEATURE_PPC_LE 0x00000001 #ifdef __KERNEL__ + +#include <asm/asm-compat.h> +#include <asm/feature-fixups.h> + #ifndef __ASSEMBLY__ /* This structure can grow, it's real size is used by head.S code @@ -132,7 +139,7 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, #define CPU_FTR_TAU ASM_CONST(0x0000000000000010) #define CPU_FTR_CAN_DOZE ASM_CONST(0x0000000000000020) #define CPU_FTR_USE_TB ASM_CONST(0x0000000000000040) -#define CPU_FTR_604_PERF_MON ASM_CONST(0x0000000000000080) +#define CPU_FTR_L2CSR ASM_CONST(0x0000000000000080) #define CPU_FTR_601 ASM_CONST(0x0000000000000100) #define CPU_FTR_HPTE_TABLE ASM_CONST(0x0000000000000200) #define CPU_FTR_CAN_NAP ASM_CONST(0x0000000000000400) @@ -152,6 +159,7 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, #define CPU_FTR_UNIFIED_ID_CACHE ASM_CONST(0x0000000001000000) #define CPU_FTR_SPE ASM_CONST(0x0000000002000000) #define CPU_FTR_NEED_PAIRED_STWCX ASM_CONST(0x0000000004000000) +#define CPU_FTR_LWSYNC ASM_CONST(0x0000000008000000) /* * Add the 64-bit processor unique features in the top half of the word; @@ -180,6 +188,8 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, #define CPU_FTR_DSCR LONG_ASM_CONST(0x0002000000000000) #define CPU_FTR_1T_SEGMENT LONG_ASM_CONST(0x0004000000000000) #define CPU_FTR_NO_SLBIE_B LONG_ASM_CONST(0x0008000000000000) +#define CPU_FTR_VSX LONG_ASM_CONST(0x0010000000000000) +#define CPU_FTR_SAO LONG_ASM_CONST(0x0020000000000000) #ifndef __ASSEMBLY__ @@ -198,6 +208,17 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, #define PPC_FEATURE_HAS_ALTIVEC_COMP 0 #endif +/* We only set the VSX features if the kernel was compiled with VSX + * support + */ +#ifdef CONFIG_VSX +#define CPU_FTR_VSX_COMP CPU_FTR_VSX +#define PPC_FEATURE_HAS_VSX_COMP PPC_FEATURE_HAS_VSX +#else +#define CPU_FTR_VSX_COMP 0 +#define PPC_FEATURE_HAS_VSX_COMP 0 +#endif + /* We only set the spe features if the kernel was compiled with spe * support */ @@ -245,8 +266,7 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \ CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE) #define CPU_FTRS_604 (CPU_FTR_COMMON | \ - CPU_FTR_USE_TB | CPU_FTR_604_PERF_MON | CPU_FTR_HPTE_TABLE | \ - CPU_FTR_PPC_LE) + CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_PPC_LE) #define CPU_FTRS_740_NOTAU (CPU_FTR_COMMON | \ CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \ CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE) @@ -347,40 +367,50 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, #define CPU_FTRS_E200 (CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \ CPU_FTR_NODSISRALIGN | CPU_FTR_COHERENT_ICACHE | \ CPU_FTR_UNIFIED_ID_CACHE) -#define CPU_FTRS_E500 (CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \ +#define CPU_FTRS_E500 (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \ + CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN) +#define CPU_FTRS_E500_2 (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \ + CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | \ CPU_FTR_NODSISRALIGN) -#define CPU_FTRS_E500_2 (CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \ - CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN) +#define CPU_FTRS_E500MC (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \ + CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN | \ + CPU_FTR_L2CSR | CPU_FTR_LWSYNC) #define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN) /* 64-bit CPUs */ -#define CPU_FTRS_POWER3 (CPU_FTR_USE_TB | \ +#define CPU_FTRS_POWER3 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | CPU_FTR_PPC_LE) -#define CPU_FTRS_RS64 (CPU_FTR_USE_TB | \ +#define CPU_FTRS_RS64 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | \ CPU_FTR_MMCRA | CPU_FTR_CTRL) -#define CPU_FTRS_POWER4 (CPU_FTR_USE_TB | \ +#define CPU_FTRS_POWER4 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_MMCRA) -#define CPU_FTRS_PPC970 (CPU_FTR_USE_TB | \ +#define CPU_FTRS_PPC970 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_ALTIVEC_COMP | CPU_FTR_CAN_NAP | CPU_FTR_MMCRA) -#define CPU_FTRS_POWER5 (CPU_FTR_USE_TB | \ +#define CPU_FTRS_POWER5 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_MMCRA | CPU_FTR_SMT | \ CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ CPU_FTR_PURR) -#define CPU_FTRS_POWER6 (CPU_FTR_USE_TB | \ +#define CPU_FTRS_POWER6 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_MMCRA | CPU_FTR_SMT | \ CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ CPU_FTR_DSCR) -#define CPU_FTRS_CELL (CPU_FTR_USE_TB | \ +#define CPU_FTRS_POWER7 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ + CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ + CPU_FTR_MMCRA | CPU_FTR_SMT | \ + CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ + CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ + CPU_FTR_DSCR | CPU_FTR_SAO) +#define CPU_FTRS_CELL (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \ CPU_FTR_PAUSE_ZERO | CPU_FTR_CI_LARGE_PAGE | CPU_FTR_CELL_TB_BUG) -#define CPU_FTRS_PA6T (CPU_FTR_USE_TB | \ +#define CPU_FTRS_PA6T (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | \ CPU_FTR_ALTIVEC_COMP | CPU_FTR_CI_LARGE_PAGE | \ CPU_FTR_PURR | CPU_FTR_REAL_LE | CPU_FTR_NO_SLBIE_B) @@ -391,7 +421,8 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, #define CPU_FTRS_POSSIBLE \ (CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 | \ CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 | \ - CPU_FTRS_CELL | CPU_FTRS_PA6T | CPU_FTR_1T_SEGMENT) + CPU_FTRS_POWER7 | CPU_FTRS_CELL | CPU_FTRS_PA6T | \ + CPU_FTR_1T_SEGMENT | CPU_FTR_VSX) #else enum { CPU_FTRS_POSSIBLE = @@ -421,7 +452,7 @@ enum { CPU_FTRS_E200 | #endif #ifdef CONFIG_E500 - CPU_FTRS_E500 | CPU_FTRS_E500_2 | + CPU_FTRS_E500 | CPU_FTRS_E500_2 | CPU_FTRS_E500MC | #endif 0, }; @@ -431,7 +462,7 @@ enum { #define CPU_FTRS_ALWAYS \ (CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 & \ CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_POWER6 & \ - CPU_FTRS_CELL & CPU_FTRS_PA6T & CPU_FTRS_POSSIBLE) + CPU_FTRS_POWER7 & CPU_FTRS_CELL & CPU_FTRS_PA6T & CPU_FTRS_POSSIBLE) #else enum { CPU_FTRS_ALWAYS = @@ -461,7 +492,7 @@ enum { CPU_FTRS_E200 & #endif #ifdef CONFIG_E500 - CPU_FTRS_E500 & CPU_FTRS_E500_2 & + CPU_FTRS_E500 & CPU_FTRS_E500_2 & CPU_FTRS_E500MC & #endif CPU_FTRS_POSSIBLE, }; @@ -477,18 +508,5 @@ static inline int cpu_has_feature(unsigned long feature) #endif /* !__ASSEMBLY__ */ -#ifdef __ASSEMBLY__ - -#define BEGIN_FTR_SECTION_NESTED(label) label: -#define BEGIN_FTR_SECTION BEGIN_FTR_SECTION_NESTED(97) -#define END_FTR_SECTION_NESTED(msk, val, label) \ - MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup) -#define END_FTR_SECTION(msk, val) \ - END_FTR_SECTION_NESTED(msk, val, 97) - -#define END_FTR_SECTION_IFSET(msk) END_FTR_SECTION((msk), (msk)) -#define END_FTR_SECTION_IFCLR(msk) END_FTR_SECTION((msk), 0) -#endif /* __ASSEMBLY__ */ - #endif /* __KERNEL__ */ #endif /* __ASM_POWERPC_CPUTABLE_H */ diff --git a/include/asm-powerpc/dcr-generic.h b/include/asm-powerpc/dcr-generic.h new file mode 100644 index 000000000000..35b71599ec46 --- /dev/null +++ b/include/asm-powerpc/dcr-generic.h @@ -0,0 +1,49 @@ +/* + * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp. + * <benh@kernel.crashing.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ASM_POWERPC_DCR_GENERIC_H +#define _ASM_POWERPC_DCR_GENERIC_H +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ + +enum host_type_t {DCR_HOST_MMIO, DCR_HOST_NATIVE, DCR_HOST_INVALID}; + +typedef struct { + enum host_type_t type; + union { + dcr_host_mmio_t mmio; + dcr_host_native_t native; + } host; +} dcr_host_t; + +extern bool dcr_map_ok_generic(dcr_host_t host); + +extern dcr_host_t dcr_map_generic(struct device_node *dev, unsigned int dcr_n, + unsigned int dcr_c); +extern void dcr_unmap_generic(dcr_host_t host, unsigned int dcr_c); + +extern u32 dcr_read_generic(dcr_host_t host, unsigned int dcr_n); + +extern void dcr_write_generic(dcr_host_t host, unsigned int dcr_n, u32 value); + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_DCR_GENERIC_H */ + + diff --git a/include/asm-powerpc/dcr-mmio.h b/include/asm-powerpc/dcr-mmio.h index 08532ff1899c..acd491dbd45a 100644 --- a/include/asm-powerpc/dcr-mmio.h +++ b/include/asm-powerpc/dcr-mmio.h @@ -27,20 +27,26 @@ typedef struct { void __iomem *token; unsigned int stride; unsigned int base; -} dcr_host_t; +} dcr_host_mmio_t; -#define DCR_MAP_OK(host) ((host).token != NULL) +static inline bool dcr_map_ok_mmio(dcr_host_mmio_t host) +{ + return host.token != NULL; +} -extern dcr_host_t dcr_map(struct device_node *dev, unsigned int dcr_n, - unsigned int dcr_c); -extern void dcr_unmap(dcr_host_t host, unsigned int dcr_c); +extern dcr_host_mmio_t dcr_map_mmio(struct device_node *dev, + unsigned int dcr_n, + unsigned int dcr_c); +extern void dcr_unmap_mmio(dcr_host_mmio_t host, unsigned int dcr_c); -static inline u32 dcr_read(dcr_host_t host, unsigned int dcr_n) +static inline u32 dcr_read_mmio(dcr_host_mmio_t host, unsigned int dcr_n) { return in_be32(host.token + ((host.base + dcr_n) * host.stride)); } -static inline void dcr_write(dcr_host_t host, unsigned int dcr_n, u32 value) +static inline void dcr_write_mmio(dcr_host_mmio_t host, + unsigned int dcr_n, + u32 value) { out_be32(host.token + ((host.base + dcr_n) * host.stride), value); } diff --git a/include/asm-powerpc/dcr-native.h b/include/asm-powerpc/dcr-native.h index f8398ce80372..72d2b72c7390 100644 --- a/include/asm-powerpc/dcr-native.h +++ b/include/asm-powerpc/dcr-native.h @@ -26,14 +26,18 @@ typedef struct { unsigned int base; -} dcr_host_t; +} dcr_host_native_t; -#define DCR_MAP_OK(host) (1) +static inline bool dcr_map_ok_native(dcr_host_native_t host) +{ + return 1; +} -#define dcr_map(dev, dcr_n, dcr_c) ((dcr_host_t){ .base = (dcr_n) }) -#define dcr_unmap(host, dcr_c) do {} while (0) -#define dcr_read(host, dcr_n) mfdcr(dcr_n + host.base) -#define dcr_write(host, dcr_n, value) mtdcr(dcr_n + host.base, value) +#define dcr_map_native(dev, dcr_n, dcr_c) \ + ((dcr_host_native_t){ .base = (dcr_n) }) +#define dcr_unmap_native(host, dcr_c) do {} while (0) +#define dcr_read_native(host, dcr_n) mfdcr(dcr_n + host.base) +#define dcr_write_native(host, dcr_n, value) mtdcr(dcr_n + host.base, value) /* Device Control Registers */ void __mtdcr(int reg, unsigned int val); diff --git a/include/asm-powerpc/dcr.h b/include/asm-powerpc/dcr.h index 9338d50538f1..53b283050ab3 100644 --- a/include/asm-powerpc/dcr.h +++ b/include/asm-powerpc/dcr.h @@ -20,14 +20,50 @@ #ifndef _ASM_POWERPC_DCR_H #define _ASM_POWERPC_DCR_H #ifdef __KERNEL__ +#ifndef __ASSEMBLY__ #ifdef CONFIG_PPC_DCR #ifdef CONFIG_PPC_DCR_NATIVE #include <asm/dcr-native.h> -#else +#endif + +#ifdef CONFIG_PPC_DCR_MMIO #include <asm/dcr-mmio.h> #endif + +/* Indirection layer for providing both NATIVE and MMIO support. */ + +#if defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) + +#include <asm/dcr-generic.h> + +#define DCR_MAP_OK(host) dcr_map_ok_generic(host) +#define dcr_map(dev, dcr_n, dcr_c) dcr_map_generic(dev, dcr_n, dcr_c) +#define dcr_unmap(host, dcr_c) dcr_unmap_generic(host, dcr_c) +#define dcr_read(host, dcr_n) dcr_read_generic(host, dcr_n) +#define dcr_write(host, dcr_n, value) dcr_write_generic(host, dcr_n, value) + +#else + +#ifdef CONFIG_PPC_DCR_NATIVE +typedef dcr_host_native_t dcr_host_t; +#define DCR_MAP_OK(host) dcr_map_ok_native(host) +#define dcr_map(dev, dcr_n, dcr_c) dcr_map_native(dev, dcr_n, dcr_c) +#define dcr_unmap(host, dcr_c) dcr_unmap_native(host, dcr_c) +#define dcr_read(host, dcr_n) dcr_read_native(host, dcr_n) +#define dcr_write(host, dcr_n, value) dcr_write_native(host, dcr_n, value) +#else +typedef dcr_host_mmio_t dcr_host_t; +#define DCR_MAP_OK(host) dcr_map_ok_mmio(host) +#define dcr_map(dev, dcr_n, dcr_c) dcr_map_mmio(dev, dcr_n, dcr_c) +#define dcr_unmap(host, dcr_c) dcr_unmap_mmio(host, dcr_c) +#define dcr_read(host, dcr_n) dcr_read_mmio(host, dcr_n) +#define dcr_write(host, dcr_n, value) dcr_write_mmio(host, dcr_n, value) +#endif + +#endif /* defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) */ + /* * On CONFIG_PPC_MERGE, we have additional helpers to read the DCR * base from the device-tree @@ -41,5 +77,6 @@ extern unsigned int dcr_resource_len(struct device_node *np, #endif /* CONFIG_PPC_MERGE */ #endif /* CONFIG_PPC_DCR */ +#endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_DCR_H */ diff --git a/include/asm-powerpc/dma-mapping.h b/include/asm-powerpc/dma-mapping.h index bbefb69bfb67..74c549780987 100644 --- a/include/asm-powerpc/dma-mapping.h +++ b/include/asm-powerpc/dma-mapping.h @@ -13,6 +13,7 @@ /* need struct page definitions */ #include <linux/mm.h> #include <linux/scatterlist.h> +#include <linux/dma-attrs.h> #include <asm/io.h> #define DMA_ERROR_CODE (~(dma_addr_t)0x0) @@ -44,6 +45,15 @@ extern void __dma_sync_page(struct page *page, unsigned long offset, #endif /* ! CONFIG_NOT_COHERENT_CACHE */ #ifdef CONFIG_PPC64 + +static inline unsigned long device_to_mask(struct device *dev) +{ + if (dev->dma_mask && *dev->dma_mask) + return *dev->dma_mask; + /* Assume devices without mask can take 32 bit addresses */ + return 0xfffffffful; +} + /* * DMA operations are abstracted for G5 vs. i/pSeries, PCI vs. VIO */ @@ -53,13 +63,17 @@ struct dma_mapping_ops { void (*free_coherent)(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle); dma_addr_t (*map_single)(struct device *dev, void *ptr, - size_t size, enum dma_data_direction direction); + size_t size, enum dma_data_direction direction, + struct dma_attrs *attrs); void (*unmap_single)(struct device *dev, dma_addr_t dma_addr, - size_t size, enum dma_data_direction direction); + size_t size, enum dma_data_direction direction, + struct dma_attrs *attrs); int (*map_sg)(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction direction); + int nents, enum dma_data_direction direction, + struct dma_attrs *attrs); void (*unmap_sg)(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction direction); + int nents, enum dma_data_direction direction, + struct dma_attrs *attrs); int (*dma_supported)(struct device *dev, u64 mask); int (*set_dma_mask)(struct device *dev, u64 dma_mask); }; @@ -109,6 +123,77 @@ static inline int dma_set_mask(struct device *dev, u64 dma_mask) return 0; } +static inline dma_addr_t dma_map_single_attrs(struct device *dev, + void *cpu_addr, + size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + return dma_ops->map_single(dev, cpu_addr, size, direction, attrs); +} + +static inline void dma_unmap_single_attrs(struct device *dev, + dma_addr_t dma_addr, + size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + dma_ops->unmap_single(dev, dma_addr, size, direction, attrs); +} + +static inline dma_addr_t dma_map_page_attrs(struct device *dev, + struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + return dma_ops->map_single(dev, page_address(page) + offset, size, + direction, attrs); +} + +static inline void dma_unmap_page_attrs(struct device *dev, + dma_addr_t dma_address, + size_t size, + enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + dma_ops->unmap_single(dev, dma_address, size, direction, attrs); +} + +static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + return dma_ops->map_sg(dev, sg, nents, direction, attrs); +} + +static inline void dma_unmap_sg_attrs(struct device *dev, + struct scatterlist *sg, + int nhwentries, + enum dma_data_direction direction, + struct dma_attrs *attrs) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + BUG_ON(!dma_ops); + dma_ops->unmap_sg(dev, sg, nhwentries, direction, attrs); +} + static inline void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag) { @@ -131,63 +216,43 @@ static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, size_t size, enum dma_data_direction direction) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - return dma_ops->map_single(dev, cpu_addr, size, direction); + return dma_map_single_attrs(dev, cpu_addr, size, direction, NULL); } static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, enum dma_data_direction direction) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - dma_ops->unmap_single(dev, dma_addr, size, direction); + dma_unmap_single_attrs(dev, dma_addr, size, direction, NULL); } static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset, size_t size, enum dma_data_direction direction) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - return dma_ops->map_single(dev, page_address(page) + offset, size, - direction); + return dma_map_page_attrs(dev, page, offset, size, direction, NULL); } static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, enum dma_data_direction direction) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - dma_ops->unmap_single(dev, dma_address, size, direction); + dma_unmap_page_attrs(dev, dma_address, size, direction, NULL); } static inline int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, enum dma_data_direction direction) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - return dma_ops->map_sg(dev, sg, nents, direction); + return dma_map_sg_attrs(dev, sg, nents, direction, NULL); } static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, enum dma_data_direction direction) { - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - BUG_ON(!dma_ops); - dma_ops->unmap_sg(dev, sg, nhwentries, direction); + dma_unmap_sg_attrs(dev, sg, nhwentries, direction, NULL); } - /* * Available generic sets of operations */ diff --git a/include/asm-powerpc/elf.h b/include/asm-powerpc/elf.h index 9080d85cb9d0..89664675b469 100644 --- a/include/asm-powerpc/elf.h +++ b/include/asm-powerpc/elf.h @@ -109,6 +109,7 @@ typedef elf_gregset_t32 compat_elf_gregset_t; #ifdef __powerpc64__ # define ELF_NVRREG32 33 /* includes vscr & vrsave stuffed together */ # define ELF_NVRREG 34 /* includes vscr & vrsave in split vectors */ +# define ELF_NVSRHALFREG 32 /* Half the vsx registers */ # define ELF_GREG_TYPE elf_greg_t64 #else # define ELF_NEVRREG 34 /* includes acc (as 2) */ @@ -158,6 +159,7 @@ typedef __vector128 elf_vrreg_t; typedef elf_vrreg_t elf_vrregset_t[ELF_NVRREG]; #ifdef __powerpc64__ typedef elf_vrreg_t elf_vrregset_t32[ELF_NVRREG32]; +typedef elf_fpreg_t elf_vsrreghalf_t32[ELF_NVSRHALFREG]; #endif #ifdef __KERNEL__ @@ -202,30 +204,8 @@ static inline void ppc_elf_core_copy_regs(elf_gregset_t elf_regs, } #define ELF_CORE_COPY_REGS(gregs, regs) ppc_elf_core_copy_regs(gregs, regs); -static inline int dump_task_regs(struct task_struct *tsk, - elf_gregset_t *elf_regs) -{ - struct pt_regs *regs = tsk->thread.regs; - if (regs) - ppc_elf_core_copy_regs(*elf_regs, regs); - - return 1; -} -#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs) - -extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *); -#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs) - typedef elf_vrregset_t elf_fpxregset_t; -#ifdef CONFIG_ALTIVEC -extern int dump_task_altivec(struct task_struct *, elf_vrregset_t *vrregs); -#define ELF_CORE_COPY_XFPREGS(tsk, regs) dump_task_altivec(tsk, regs) -#define ELF_CORE_XFPREG_TYPE NT_PPC_VMX -#endif - -#endif /* __KERNEL__ */ - /* ELF_HWCAP yields a mask that user programs can use to figure out what instruction set this cpu supports. This could be done in userspace, but it's not easy, and we've already done it here. */ @@ -243,8 +223,6 @@ extern int dump_task_altivec(struct task_struct *, elf_vrregset_t *vrregs); } while (0) #endif /* __powerpc64__ */ -#ifdef __KERNEL__ - #ifdef __powerpc64__ # define SET_PERSONALITY(ex, ibcs2) \ do { \ @@ -257,7 +235,8 @@ do { \ else \ clear_thread_flag(TIF_ABI_PENDING); \ if (personality(current->personality) != PER_LINUX32) \ - set_personality(PER_LINUX); \ + set_personality(PER_LINUX | \ + (current->personality & (~PER_MASK))); \ } while (0) /* * An executable for which elf_read_implies_exec() returns TRUE will @@ -272,8 +251,6 @@ do { \ # define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX) #endif /* __powerpc64__ */ -#endif /* __KERNEL__ */ - extern int dcache_bsize; extern int icache_bsize; extern int ucache_bsize; @@ -285,6 +262,8 @@ extern int arch_setup_additional_pages(struct linux_binprm *bprm, int executable_stack); #define VDSO_AUX_ENT(a,b) NEW_AUX_ENT(a,b); +#endif /* __KERNEL__ */ + /* * The requirements here are: * - keep the final alignment of sp (sp & 0xf) @@ -422,6 +401,8 @@ do { \ /* Keep this the last entry. */ #define R_PPC64_NUM 107 +#ifdef __KERNEL__ + #ifdef CONFIG_SPU_BASE /* Notes used in ET_CORE. Note name is "SPU/<fd>/<filename>". */ #define NT_SPU 1 @@ -430,4 +411,6 @@ do { \ #endif /* CONFIG_SPU_BASE */ +#endif /* __KERNEL */ + #endif /* _ASM_POWERPC_ELF_H */ diff --git a/include/asm-powerpc/feature-fixups.h b/include/asm-powerpc/feature-fixups.h new file mode 100644 index 000000000000..a1029967620b --- /dev/null +++ b/include/asm-powerpc/feature-fixups.h @@ -0,0 +1,126 @@ +#ifndef __ASM_POWERPC_FEATURE_FIXUPS_H +#define __ASM_POWERPC_FEATURE_FIXUPS_H + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifdef __ASSEMBLY__ + +/* + * Feature section common macros + * + * Note that the entries now contain offsets between the table entry + * and the code rather than absolute code pointers in order to be + * useable with the vdso shared library. There is also an assumption + * that values will be negative, that is, the fixup table has to be + * located after the code it fixes up. + */ +#if defined(CONFIG_PPC64) && !defined(__powerpc64__) +/* 64 bits kernel, 32 bits code (ie. vdso32) */ +#define FTR_ENTRY_LONG .llong +#define FTR_ENTRY_OFFSET .long 0xffffffff; .long +#else +/* 64 bit kernel 64 bit code, or 32 bit kernel 32 bit code */ +#define FTR_ENTRY_LONG PPC_LONG +#define FTR_ENTRY_OFFSET PPC_LONG +#endif + +#define START_FTR_SECTION(label) label##1: + +#define FTR_SECTION_ELSE_NESTED(label) \ +label##2: \ + .pushsection __ftr_alt_##label,"a"; \ + .align 2; \ +label##3: + +#define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect) \ +label##4: \ + .popsection; \ + .pushsection sect,"a"; \ + .align 3; \ +label##5: \ + FTR_ENTRY_LONG msk; \ + FTR_ENTRY_LONG val; \ + FTR_ENTRY_OFFSET label##1b-label##5b; \ + FTR_ENTRY_OFFSET label##2b-label##5b; \ + FTR_ENTRY_OFFSET label##3b-label##5b; \ + FTR_ENTRY_OFFSET label##4b-label##5b; \ + .popsection; + + +/* CPU feature dependent sections */ +#define BEGIN_FTR_SECTION_NESTED(label) START_FTR_SECTION(label) +#define BEGIN_FTR_SECTION START_FTR_SECTION(97) + +#define END_FTR_SECTION_NESTED(msk, val, label) \ + FTR_SECTION_ELSE_NESTED(label) \ + MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup) + +#define END_FTR_SECTION(msk, val) \ + END_FTR_SECTION_NESTED(msk, val, 97) + +#define END_FTR_SECTION_IFSET(msk) END_FTR_SECTION((msk), (msk)) +#define END_FTR_SECTION_IFCLR(msk) END_FTR_SECTION((msk), 0) + +/* CPU feature sections with alternatives, use BEGIN_FTR_SECTION to start */ +#define FTR_SECTION_ELSE FTR_SECTION_ELSE_NESTED(97) +#define ALT_FTR_SECTION_END_NESTED(msk, val, label) \ + MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup) +#define ALT_FTR_SECTION_END_NESTED_IFSET(msk, label) \ + ALT_FTR_SECTION_END_NESTED(msk, msk, label) +#define ALT_FTR_SECTION_END_NESTED_IFCLR(msk, label) \ + ALT_FTR_SECTION_END_NESTED(msk, 0, label) +#define ALT_FTR_SECTION_END(msk, val) \ + ALT_FTR_SECTION_END_NESTED(msk, val, 97) +#define ALT_FTR_SECTION_END_IFSET(msk) \ + ALT_FTR_SECTION_END_NESTED_IFSET(msk, 97) +#define ALT_FTR_SECTION_END_IFCLR(msk) \ + ALT_FTR_SECTION_END_NESTED_IFCLR(msk, 97) + +/* Firmware feature dependent sections */ +#define BEGIN_FW_FTR_SECTION_NESTED(label) START_FTR_SECTION(label) +#define BEGIN_FW_FTR_SECTION START_FTR_SECTION(97) + +#define END_FW_FTR_SECTION_NESTED(msk, val, label) \ + FTR_SECTION_ELSE_NESTED(label) \ + MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup) + +#define END_FW_FTR_SECTION(msk, val) \ + END_FW_FTR_SECTION_NESTED(msk, val, 97) + +#define END_FW_FTR_SECTION_IFSET(msk) END_FW_FTR_SECTION((msk), (msk)) +#define END_FW_FTR_SECTION_IFCLR(msk) END_FW_FTR_SECTION((msk), 0) + +/* Firmware feature sections with alternatives */ +#define FW_FTR_SECTION_ELSE_NESTED(label) FTR_SECTION_ELSE_NESTED(label) +#define FW_FTR_SECTION_ELSE FTR_SECTION_ELSE_NESTED(97) +#define ALT_FW_FTR_SECTION_END_NESTED(msk, val, label) \ + MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup) +#define ALT_FW_FTR_SECTION_END_NESTED_IFSET(msk, label) \ + ALT_FW_FTR_SECTION_END_NESTED(msk, msk, label) +#define ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, label) \ + ALT_FW_FTR_SECTION_END_NESTED(msk, 0, label) +#define ALT_FW_FTR_SECTION_END(msk, val) \ + ALT_FW_FTR_SECTION_END_NESTED(msk, val, 97) +#define ALT_FW_FTR_SECTION_END_IFSET(msk) \ + ALT_FW_FTR_SECTION_END_NESTED_IFSET(msk, 97) +#define ALT_FW_FTR_SECTION_END_IFCLR(msk) \ + ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, 97) + +#endif /* __ASSEMBLY__ */ + +/* LWSYNC feature sections */ +#define START_LWSYNC_SECTION(label) label##1: +#define MAKE_LWSYNC_SECTION_ENTRY(label, sect) \ +label##2: \ + .pushsection sect,"a"; \ + .align 2; \ +label##3: \ + .long label##1b-label##3b; \ + .popsection; + +#endif /* __ASM_POWERPC_FEATURE_FIXUPS_H */ diff --git a/include/asm-powerpc/firmware.h b/include/asm-powerpc/firmware.h index 1e41bd1c8502..ef328995ba9d 100644 --- a/include/asm-powerpc/firmware.h +++ b/include/asm-powerpc/firmware.h @@ -15,6 +15,7 @@ #ifdef __KERNEL__ #include <asm/asm-compat.h> +#include <asm/feature-fixups.h> /* firmware feature bitmask values */ #define FIRMWARE_MAX_FEATURES 63 @@ -125,18 +126,6 @@ extern int fwnmi_active; extern unsigned int __start___fw_ftr_fixup, __stop___fw_ftr_fixup; -#else /* __ASSEMBLY__ */ - -#define BEGIN_FW_FTR_SECTION_NESTED(label) label: -#define BEGIN_FW_FTR_SECTION BEGIN_FW_FTR_SECTION_NESTED(97) -#define END_FW_FTR_SECTION_NESTED(msk, val, label) \ - MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup) -#define END_FW_FTR_SECTION(msk, val) \ - END_FW_FTR_SECTION_NESTED(msk, val, 97) - -#define END_FW_FTR_SECTION_IFSET(msk) END_FW_FTR_SECTION((msk), (msk)) -#define END_FW_FTR_SECTION_IFCLR(msk) END_FW_FTR_SECTION((msk), 0) - #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ #endif /* __ASM_POWERPC_FIRMWARE_H */ diff --git a/include/asm-powerpc/fsl_gtm.h b/include/asm-powerpc/fsl_gtm.h new file mode 100644 index 000000000000..8e8c9b5032d3 --- /dev/null +++ b/include/asm-powerpc/fsl_gtm.h @@ -0,0 +1,47 @@ +/* + * Freescale General-purpose Timers Module + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish <gridish@freescale.com> + * Jerry Huang <Chang-Ming.Huang@freescale.com> + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __ASM_FSL_GTM_H +#define __ASM_FSL_GTM_H + +#include <linux/types.h> + +struct gtm; + +struct gtm_timer { + unsigned int irq; + + struct gtm *gtm; + bool requested; + u8 __iomem *gtcfr; + __be16 __iomem *gtmdr; + __be16 __iomem *gtpsr; + __be16 __iomem *gtcnr; + __be16 __iomem *gtrfr; + __be16 __iomem *gtevr; +}; + +extern struct gtm_timer *gtm_get_timer16(void); +extern struct gtm_timer *gtm_get_specific_timer16(struct gtm *gtm, + unsigned int timer); +extern void gtm_put_timer16(struct gtm_timer *tmr); +extern int gtm_set_timer16(struct gtm_timer *tmr, unsigned long usec, + bool reload); +extern int gtm_set_exact_timer16(struct gtm_timer *tmr, u16 usec, + bool reload); +extern void gtm_stop_timer16(struct gtm_timer *tmr); +extern void gtm_ack_timer16(struct gtm_timer *tmr, u16 events); + +#endif /* __ASM_FSL_GTM_H */ diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h index 89189488e286..8b627823f5f9 100644 --- a/include/asm-powerpc/io.h +++ b/include/asm-powerpc/io.h @@ -95,33 +95,60 @@ extern resource_size_t isa_mem_base; #define IO_SET_SYNC_FLAG() #endif -#define DEF_MMIO_IN(name, type, insn) \ -static inline type name(const volatile type __iomem *addr) \ +/* gcc 4.0 and older doesn't have 'Z' constraint */ +#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ == 0) +#define DEF_MMIO_IN_LE(name, size, insn) \ +static inline u##size name(const volatile u##size __iomem *addr) \ { \ - type ret; \ - __asm__ __volatile__("sync;" insn ";twi 0,%0,0;isync" \ + u##size ret; \ + __asm__ __volatile__("sync;"#insn" %0,0,%1;twi 0,%0,0;isync" \ : "=r" (ret) : "r" (addr), "m" (*addr) : "memory"); \ return ret; \ } -#define DEF_MMIO_OUT(name, type, insn) \ -static inline void name(volatile type __iomem *addr, type val) \ +#define DEF_MMIO_OUT_LE(name, size, insn) \ +static inline void name(volatile u##size __iomem *addr, u##size val) \ { \ - __asm__ __volatile__("sync;" insn \ + __asm__ __volatile__("sync;"#insn" %1,0,%2" \ : "=m" (*addr) : "r" (val), "r" (addr) : "memory"); \ IO_SET_SYNC_FLAG(); \ } +#else /* newer gcc */ +#define DEF_MMIO_IN_LE(name, size, insn) \ +static inline u##size name(const volatile u##size __iomem *addr) \ +{ \ + u##size ret; \ + __asm__ __volatile__("sync;"#insn" %0,%y1;twi 0,%0,0;isync" \ + : "=r" (ret) : "Z" (*addr) : "memory"); \ + return ret; \ +} + +#define DEF_MMIO_OUT_LE(name, size, insn) \ +static inline void name(volatile u##size __iomem *addr, u##size val) \ +{ \ + __asm__ __volatile__("sync;"#insn" %1,%y0" \ + : "=Z" (*addr) : "r" (val) : "memory"); \ + IO_SET_SYNC_FLAG(); \ +} +#endif +#define DEF_MMIO_IN_BE(name, size, insn) \ +static inline u##size name(const volatile u##size __iomem *addr) \ +{ \ + u##size ret; \ + __asm__ __volatile__("sync;"#insn"%U1%X1 %0,%1;twi 0,%0,0;isync"\ + : "=r" (ret) : "m" (*addr) : "memory"); \ + return ret; \ +} -#define DEF_MMIO_IN_BE(name, size, insn) \ - DEF_MMIO_IN(name, u##size, __stringify(insn)"%U2%X2 %0,%2") -#define DEF_MMIO_IN_LE(name, size, insn) \ - DEF_MMIO_IN(name, u##size, __stringify(insn)" %0,0,%1") +#define DEF_MMIO_OUT_BE(name, size, insn) \ +static inline void name(volatile u##size __iomem *addr, u##size val) \ +{ \ + __asm__ __volatile__("sync;"#insn"%U0%X0 %1,%0" \ + : "=m" (*addr) : "r" (val) : "memory"); \ + IO_SET_SYNC_FLAG(); \ +} -#define DEF_MMIO_OUT_BE(name, size, insn) \ - DEF_MMIO_OUT(name, u##size, __stringify(insn)"%U0%X0 %1,%0") -#define DEF_MMIO_OUT_LE(name, size, insn) \ - DEF_MMIO_OUT(name, u##size, __stringify(insn)" %1,0,%2") DEF_MMIO_IN_BE(in_8, 8, lbz); DEF_MMIO_IN_BE(in_be16, 16, lhz); @@ -745,7 +772,7 @@ static inline void * bus_to_virt(unsigned long address) #define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set) #define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set) -#define clrsetbits_le16(addr, clear, set) clrsetbits(le32, addr, clear, set) +#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set) #define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set) diff --git a/include/asm-powerpc/ioctl.h b/include/asm-powerpc/ioctl.h index 8eb99848c402..57d68304218b 100644 --- a/include/asm-powerpc/ioctl.h +++ b/include/asm-powerpc/ioctl.h @@ -1,69 +1,13 @@ #ifndef _ASM_POWERPC_IOCTL_H #define _ASM_POWERPC_IOCTL_H - -/* - * this was copied from the alpha as it's a bit cleaner there. - * -- Cort - */ - -#define _IOC_NRBITS 8 -#define _IOC_TYPEBITS 8 #define _IOC_SIZEBITS 13 #define _IOC_DIRBITS 3 -#define _IOC_NRMASK ((1 << _IOC_NRBITS)-1) -#define _IOC_TYPEMASK ((1 << _IOC_TYPEBITS)-1) -#define _IOC_SIZEMASK ((1 << _IOC_SIZEBITS)-1) -#define _IOC_DIRMASK ((1 << _IOC_DIRBITS)-1) - -#define _IOC_NRSHIFT 0 -#define _IOC_TYPESHIFT (_IOC_NRSHIFT+_IOC_NRBITS) -#define _IOC_SIZESHIFT (_IOC_TYPESHIFT+_IOC_TYPEBITS) -#define _IOC_DIRSHIFT (_IOC_SIZESHIFT+_IOC_SIZEBITS) - -/* - * Direction bits _IOC_NONE could be 0, but OSF/1 gives it a bit. - * And this turns out useful to catch old ioctl numbers in header - * files for us. - */ #define _IOC_NONE 1U #define _IOC_READ 2U #define _IOC_WRITE 4U -#define _IOC(dir,type,nr,size) \ - (((dir) << _IOC_DIRSHIFT) | \ - ((type) << _IOC_TYPESHIFT) | \ - ((nr) << _IOC_NRSHIFT) | \ - ((size) << _IOC_SIZESHIFT)) - -/* provoke compile error for invalid uses of size argument */ -extern unsigned int __invalid_size_argument_for_IOC; -#define _IOC_TYPECHECK(t) \ - ((sizeof(t) == sizeof(t[1]) && \ - sizeof(t) < (1 << _IOC_SIZEBITS)) ? \ - sizeof(t) : __invalid_size_argument_for_IOC) - -/* used to create numbers */ -#define _IO(type,nr) _IOC(_IOC_NONE,(type),(nr),0) -#define _IOR(type,nr,size) _IOC(_IOC_READ,(type),(nr),(_IOC_TYPECHECK(size))) -#define _IOW(type,nr,size) _IOC(_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size))) -#define _IOWR(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size))) -#define _IOR_BAD(type,nr,size) _IOC(_IOC_READ,(type),(nr),sizeof(size)) -#define _IOW_BAD(type,nr,size) _IOC(_IOC_WRITE,(type),(nr),sizeof(size)) -#define _IOWR_BAD(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size)) - -/* used to decode them.. */ -#define _IOC_DIR(nr) (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) -#define _IOC_TYPE(nr) (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK) -#define _IOC_NR(nr) (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK) -#define _IOC_SIZE(nr) (((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK) - -/* various drivers, such as the pcmcia stuff, need these... */ -#define IOC_IN (_IOC_WRITE << _IOC_DIRSHIFT) -#define IOC_OUT (_IOC_READ << _IOC_DIRSHIFT) -#define IOC_INOUT ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT) -#define IOCSIZE_MASK (_IOC_SIZEMASK << _IOC_SIZESHIFT) -#define IOCSIZE_SHIFT (_IOC_SIZESHIFT) +#include <asm-generic/ioctl.h> #endif /* _ASM_POWERPC_IOCTL_H */ diff --git a/include/asm-powerpc/iommu.h b/include/asm-powerpc/iommu.h index 852e15f51a1e..51ecfef8d843 100644 --- a/include/asm-powerpc/iommu.h +++ b/include/asm-powerpc/iommu.h @@ -79,11 +79,13 @@ extern void iommu_free_table(struct iommu_table *tbl, const char *node_name); extern struct iommu_table *iommu_init_table(struct iommu_table * tbl, int nid); -extern int iommu_map_sg(struct device *dev, struct scatterlist *sglist, - int nelems, unsigned long mask, - enum dma_data_direction direction); +extern int iommu_map_sg(struct device *dev, struct iommu_table *tbl, + struct scatterlist *sglist, int nelems, + unsigned long mask, enum dma_data_direction direction, + struct dma_attrs *attrs); extern void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist, - int nelems, enum dma_data_direction direction); + int nelems, enum dma_data_direction direction, + struct dma_attrs *attrs); extern void *iommu_alloc_coherent(struct device *dev, struct iommu_table *tbl, size_t size, dma_addr_t *dma_handle, @@ -92,9 +94,11 @@ extern void iommu_free_coherent(struct iommu_table *tbl, size_t size, void *vaddr, dma_addr_t dma_handle); extern dma_addr_t iommu_map_single(struct device *dev, struct iommu_table *tbl, void *vaddr, size_t size, unsigned long mask, - enum dma_data_direction direction); + enum dma_data_direction direction, + struct dma_attrs *attrs); extern void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction); + size_t size, enum dma_data_direction direction, + struct dma_attrs *attrs); extern void iommu_init_early_pSeries(void); extern void iommu_init_early_iSeries(void); diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h index 5089deb8fec3..1ef8e304e0ea 100644 --- a/include/asm-powerpc/irq.h +++ b/include/asm-powerpc/irq.h @@ -619,6 +619,19 @@ struct pt_regs; #define __ARCH_HAS_DO_SOFTIRQ +#if defined(CONFIG_BOOKE) || defined(CONFIG_40x) +/* + * Per-cpu stacks for handling critical, debug and machine check + * level interrupts. + */ +extern struct thread_info *critirq_ctx[NR_CPUS]; +extern struct thread_info *dbgirq_ctx[NR_CPUS]; +extern struct thread_info *mcheckirq_ctx[NR_CPUS]; +extern void exc_lvl_ctx_init(void); +#else +#define exc_lvl_ctx_init() +#endif + #ifdef CONFIG_IRQSTACKS /* * Per-cpu stacks for handling hard and soft interrupts. diff --git a/include/asm-powerpc/kexec.h b/include/asm-powerpc/kexec.h index 701857bc8e24..acdcdc66f1b6 100644 --- a/include/asm-powerpc/kexec.h +++ b/include/asm-powerpc/kexec.h @@ -34,6 +34,8 @@ #ifndef __ASSEMBLY__ #include <linux/cpumask.h> +typedef void (*crash_shutdown_t)(void); + #ifdef CONFIG_KEXEC #ifdef __powerpc64__ @@ -123,7 +125,6 @@ struct pt_regs; extern void default_machine_kexec(struct kimage *image); extern int default_machine_kexec_prepare(struct kimage *image); extern void default_machine_crash_shutdown(struct pt_regs *regs); -typedef void (*crash_shutdown_t)(void); extern int crash_shutdown_register(crash_shutdown_t handler); extern int crash_shutdown_unregister(crash_shutdown_t handler); @@ -143,6 +144,16 @@ static inline int overlaps_crashkernel(unsigned long start, unsigned long size) static inline void reserve_crashkernel(void) { ; } +static inline int crash_shutdown_register(crash_shutdown_t handler) +{ + return 0; +} + +static inline int crash_shutdown_unregister(crash_shutdown_t handler) +{ + return 0; +} + #endif /* CONFIG_KEXEC */ #endif /* ! __ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h index 54ed64df95b8..989922621e35 100644 --- a/include/asm-powerpc/machdep.h +++ b/include/asm-powerpc/machdep.h @@ -262,6 +262,7 @@ struct machdep_calls { #endif }; +extern void e500_idle(void); extern void power4_idle(void); extern void power4_cpu_offline_powersave(void); extern void ppc6xx_idle(void); diff --git a/include/asm-powerpc/mman.h b/include/asm-powerpc/mman.h index 24cf664a8295..9209f755763e 100644 --- a/include/asm-powerpc/mman.h +++ b/include/asm-powerpc/mman.h @@ -10,6 +10,8 @@ * 2 of the License, or (at your option) any later version. */ +#define PROT_SAO 0x10 /* Strong Access Ordering */ + #define MAP_RENAME MAP_ANONYMOUS /* In SunOS terminology */ #define MAP_NORESERVE 0x40 /* don't reserve swap pages */ #define MAP_LOCKED 0x80 @@ -24,4 +26,38 @@ #define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ #define MAP_NONBLOCK 0x10000 /* do not block on IO */ +#ifdef __KERNEL__ +#ifdef CONFIG_PPC64 + +#include <asm/cputable.h> +#include <linux/mm.h> + +/* + * This file is included by linux/mman.h, so we can't use cacl_vm_prot_bits() + * here. How important is the optimization? + */ +static inline unsigned long arch_calc_vm_prot_bits(unsigned long prot) +{ + return (prot & PROT_SAO) ? VM_SAO : 0; +} +#define arch_calc_vm_prot_bits(prot) arch_calc_vm_prot_bits(prot) + +static inline pgprot_t arch_vm_get_page_prot(unsigned long vm_flags) +{ + return (vm_flags & VM_SAO) ? __pgprot(_PAGE_SAO) : 0; +} +#define arch_vm_get_page_prot(vm_flags) arch_vm_get_page_prot(vm_flags) + +static inline int arch_validate_prot(unsigned long prot) +{ + if (prot & ~(PROT_READ | PROT_WRITE | PROT_EXEC | PROT_SEM | PROT_SAO)) + return 0; + if ((prot & PROT_SAO) && !cpu_has_feature(CPU_FTR_SAO)) + return 0; + return 1; +} +#define arch_validate_prot(prot) arch_validate_prot(prot) + +#endif /* CONFIG_PPC64 */ +#endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_MMAN_H */ diff --git a/include/asm-powerpc/mmu-hash32.h b/include/asm-powerpc/mmu-hash32.h index 6e21ca618ec3..16b1a1e77e64 100644 --- a/include/asm-powerpc/mmu-hash32.h +++ b/include/asm-powerpc/mmu-hash32.h @@ -28,24 +28,18 @@ #define BPP_RW 0x02 /* Read/write */ #ifndef __ASSEMBLY__ +/* Contort a phys_addr_t into the right format/bits for a BAT */ +#ifdef CONFIG_PHYS_64BIT +#define BAT_PHYS_ADDR(x) ((u32)((x & 0x00000000fffe0000ULL) | \ + ((x & 0x0000000e00000000ULL) >> 24) | \ + ((x & 0x0000000100000000ULL) >> 30))) +#else +#define BAT_PHYS_ADDR(x) (x) +#endif + struct ppc_bat { - struct { - unsigned long bepi:15; /* Effective page index (virtual address) */ - unsigned long :4; /* Unused */ - unsigned long bl:11; /* Block size mask */ - unsigned long vs:1; /* Supervisor valid */ - unsigned long vp:1; /* User valid */ - } batu; /* Upper register */ - struct { - unsigned long brpn:15; /* Real page index (physical address) */ - unsigned long :10; /* Unused */ - unsigned long w:1; /* Write-thru cache */ - unsigned long i:1; /* Cache inhibit */ - unsigned long m:1; /* Memory coherence */ - unsigned long g:1; /* Guarded (MBZ in IBAT) */ - unsigned long :1; /* Unused */ - unsigned long pp:2; /* Page access protections */ - } batl; /* Lower register */ + u32 batu; + u32 batl; }; #endif /* !__ASSEMBLY__ */ diff --git a/include/asm-powerpc/mmu-hash64.h b/include/asm-powerpc/mmu-hash64.h index 39c5c5f62bf5..d1dc16afb118 100644 --- a/include/asm-powerpc/mmu-hash64.h +++ b/include/asm-powerpc/mmu-hash64.h @@ -182,6 +182,7 @@ extern int mmu_io_psize; extern int mmu_kernel_ssize; extern int mmu_highuser_ssize; extern u16 mmu_slb_size; +extern unsigned long tce_alloc_start, tce_alloc_end; /* * If the processor supports 64k normal pages but not 64k cache diff --git a/include/asm-powerpc/mpc6xx.h b/include/asm-powerpc/mpc6xx.h new file mode 100644 index 000000000000..effc2291beb2 --- /dev/null +++ b/include/asm-powerpc/mpc6xx.h @@ -0,0 +1,6 @@ +#ifndef __ASM_POWERPC_MPC6xx_H +#define __ASM_POWERPC_MPC6xx_H + +void mpc6xx_enter_standby(void); + +#endif diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h index a4d0f876b427..fe566a348a86 100644 --- a/include/asm-powerpc/mpic.h +++ b/include/asm-powerpc/mpic.h @@ -353,6 +353,8 @@ struct mpic #define MPIC_ENABLE_MCK 0x00000200 /* Disable bias among target selection, spread interrupts evenly */ #define MPIC_NO_BIAS 0x00000400 +/* Ignore NIRQS as reported by FRR */ +#define MPIC_BROKEN_FRR_NIRQS 0x00000800 /* MPIC HW modification ID */ #define MPIC_REGSET_MASK 0xf0000000 diff --git a/include/asm-powerpc/of_device.h b/include/asm-powerpc/of_device.h index 6526e139a463..3c123990ca2e 100644 --- a/include/asm-powerpc/of_device.h +++ b/include/asm-powerpc/of_device.h @@ -21,8 +21,6 @@ extern struct of_device *of_device_alloc(struct device_node *np, const char *bus_id, struct device *parent); -extern ssize_t of_device_get_modalias(struct of_device *ofdev, - char *str, ssize_t len); extern int of_device_uevent(struct device *dev, struct kobj_uevent_env *env); diff --git a/include/asm-powerpc/pSeries_reconfig.h b/include/asm-powerpc/pSeries_reconfig.h index ea6cfb8efb84..e482e5352e69 100644 --- a/include/asm-powerpc/pSeries_reconfig.h +++ b/include/asm-powerpc/pSeries_reconfig.h @@ -9,8 +9,10 @@ * added or removed on pSeries systems. */ -#define PSERIES_RECONFIG_ADD 0x0001 -#define PSERIES_RECONFIG_REMOVE 0x0002 +#define PSERIES_RECONFIG_ADD 0x0001 +#define PSERIES_RECONFIG_REMOVE 0x0002 +#define PSERIES_DRCONF_MEM_ADD 0x0003 +#define PSERIES_DRCONF_MEM_REMOVE 0x0004 #ifdef CONFIG_PPC_PSERIES extern int pSeries_reconfig_notifier_register(struct notifier_block *); diff --git a/include/asm-powerpc/page_64.h b/include/asm-powerpc/page_64.h index 25af4fc8daf4..02fd80710e9d 100644 --- a/include/asm-powerpc/page_64.h +++ b/include/asm-powerpc/page_64.h @@ -126,16 +126,22 @@ extern unsigned int get_slice_psize(struct mm_struct *mm, extern void slice_init_context(struct mm_struct *mm, unsigned int psize); extern void slice_set_user_psize(struct mm_struct *mm, unsigned int psize); +extern void slice_set_range_psize(struct mm_struct *mm, unsigned long start, + unsigned long len, unsigned int psize); + #define slice_mm_new_context(mm) ((mm)->context.id == 0) #endif /* __ASSEMBLY__ */ #else #define slice_init() +#define get_slice_psize(mm, addr) ((mm)->context.user_psize) #define slice_set_user_psize(mm, psize) \ do { \ (mm)->context.user_psize = (psize); \ (mm)->context.sllp = SLB_VSID_USER | mmu_psize_defs[(psize)].sllp; \ } while (0) +#define slice_set_range_psize(mm, start, len, psize) \ + slice_set_user_psize((mm), (psize)) #define slice_mm_new_context(mm) 1 #endif /* CONFIG_PPC_MM_SLICES */ diff --git a/include/asm-powerpc/pci-bridge.h b/include/asm-powerpc/pci-bridge.h index b95d033ae6e6..ae2ea803a0f2 100644 --- a/include/asm-powerpc/pci-bridge.h +++ b/include/asm-powerpc/pci-bridge.h @@ -92,12 +92,15 @@ struct pci_controller { * anything but the PHB. Only allow talking to the PHB if this is * set. * BIG_ENDIAN - cfg_addr is a big endian register + * BROKEN_MRM - the 440EPx/GRx chips have an errata that causes hangs on + * the PLB4. Effectively disable MRM commands by setting this. */ #define PPC_INDIRECT_TYPE_SET_CFG_TYPE 0x00000001 #define PPC_INDIRECT_TYPE_EXT_REG 0x00000002 #define PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS 0x00000004 #define PPC_INDIRECT_TYPE_NO_PCIE_LINK 0x00000008 #define PPC_INDIRECT_TYPE_BIG_ENDIAN 0x00000010 +#define PPC_INDIRECT_TYPE_BROKEN_MRM 0x00000020 u32 indirect_type; #endif /* !CONFIG_PPC64 */ /* Currently, we limit ourselves to 1 IO range and 3 mem diff --git a/include/asm-powerpc/pgtable-4k.h b/include/asm-powerpc/pgtable-4k.h index 818e2abc81e2..fd2090dc1dce 100644 --- a/include/asm-powerpc/pgtable-4k.h +++ b/include/asm-powerpc/pgtable-4k.h @@ -41,6 +41,7 @@ #define PGDIR_MASK (~(PGDIR_SIZE-1)) /* PTE bits */ +#define _PAGE_HASHPTE 0x0400 /* software: pte has an associated HPTE */ #define _PAGE_SECONDARY 0x8000 /* software: HPTE is in secondary group */ #define _PAGE_GROUP_IX 0x7000 /* software: HPTE index within group */ #define _PAGE_F_SECOND _PAGE_SECONDARY diff --git a/include/asm-powerpc/pgtable-64k.h b/include/asm-powerpc/pgtable-64k.h index 1cbd6b377eea..c5007712473f 100644 --- a/include/asm-powerpc/pgtable-64k.h +++ b/include/asm-powerpc/pgtable-64k.h @@ -75,6 +75,20 @@ static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd) #define _PAGE_COMBO 0x10000000 /* this is a combo 4k page */ #define _PAGE_4K_PFN 0x20000000 /* PFN is for a single 4k page */ +/* For 64K page, we don't have a separate _PAGE_HASHPTE bit. Instead, + * we set that to be the whole sub-bits mask. The C code will only + * test this, so a multi-bit mask will work. For combo pages, this + * is equivalent as effectively, the old _PAGE_HASHPTE was an OR of + * all the sub bits. For real 64k pages, we now have the assembly set + * _PAGE_HPTE_SUB0 in addition to setting the HIDX bits which overlap + * that mask. This is fine as long as the HIDX bits are never set on + * a PTE that isn't hashed, which is the case today. + * + * A little nit is for the huge page C code, which does the hashing + * in C, we need to provide which bit to use. + */ +#define _PAGE_HASHPTE _PAGE_HPTE_SUB + /* Note the full page bits must be in the same location as for normal * 4k pages as the same asssembly will be used to insert 64K pages * wether the kernel has CONFIG_PPC_64K_PAGES or not @@ -83,8 +97,7 @@ static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd) #define _PAGE_F_GIX 0x00007000 /* full page: hidx bits */ /* PTE flags to conserve for HPTE identification */ -#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | _PAGE_HPTE_SUB |\ - _PAGE_COMBO) +#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | _PAGE_COMBO) /* Shift to put page number into pte. * diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h index c08e714d0c42..73015f0139de 100644 --- a/include/asm-powerpc/pgtable-ppc32.h +++ b/include/asm-powerpc/pgtable-ppc32.h @@ -182,6 +182,9 @@ extern int icache_44x_need_flush; #define _PMD_SIZE_16M 0x0e0 #define PMD_PAGE_SIZE(pmdval) (1024 << (((pmdval) & _PMD_SIZE) >> 4)) +/* Until my rework is finished, 40x still needs atomic PTE updates */ +#define PTE_ATOMIC_UPDATES 1 + #elif defined(CONFIG_44x) /* * Definitions for PPC440 @@ -253,17 +256,17 @@ extern int icache_44x_need_flush; */ #define _PAGE_PRESENT 0x00000001 /* S: PTE valid */ -#define _PAGE_RW 0x00000002 /* S: Write permission */ +#define _PAGE_RW 0x00000002 /* S: Write permission */ #define _PAGE_FILE 0x00000004 /* S: nonlinear file mapping */ +#define _PAGE_HWEXEC 0x00000004 /* H: Execute permission */ #define _PAGE_ACCESSED 0x00000008 /* S: Page referenced */ -#define _PAGE_HWWRITE 0x00000010 /* H: Dirty & RW */ -#define _PAGE_HWEXEC 0x00000020 /* H: Execute permission */ -#define _PAGE_USER 0x00000040 /* S: User page */ -#define _PAGE_ENDIAN 0x00000080 /* H: E bit */ -#define _PAGE_GUARDED 0x00000100 /* H: G bit */ -#define _PAGE_DIRTY 0x00000200 /* S: Page dirty */ -#define _PAGE_NO_CACHE 0x00000400 /* H: I bit */ -#define _PAGE_WRITETHRU 0x00000800 /* H: W bit */ +#define _PAGE_DIRTY 0x00000010 /* S: Page dirty */ +#define _PAGE_USER 0x00000040 /* S: User page */ +#define _PAGE_ENDIAN 0x00000080 /* H: E bit */ +#define _PAGE_GUARDED 0x00000100 /* H: G bit */ +#define _PAGE_COHERENT 0x00000200 /* H: M bit */ +#define _PAGE_NO_CACHE 0x00000400 /* H: I bit */ +#define _PAGE_WRITETHRU 0x00000800 /* H: W bit */ /* TODO: Add large page lowmem mapping support */ #define _PMD_PRESENT 0 @@ -273,6 +276,7 @@ extern int icache_44x_need_flush; /* ERPN in a PTE never gets cleared, ignore it */ #define _PTE_NONE_MASK 0xffffffff00000000ULL + #elif defined(CONFIG_FSL_BOOKE) /* MMU Assist Register 3: @@ -315,6 +319,9 @@ extern int icache_44x_need_flush; #define _PMD_PRESENT_MASK (PAGE_MASK) #define _PMD_BAD (~PAGE_MASK) +/* Until my rework is finished, FSL BookE still needs atomic PTE updates */ +#define PTE_ATOMIC_UPDATES 1 + #elif defined(CONFIG_8xx) /* Definitions for 8xx embedded chips. */ #define _PAGE_PRESENT 0x0001 /* Page is valid */ @@ -345,6 +352,9 @@ extern int icache_44x_need_flush; #define _PTE_NONE_MASK _PAGE_ACCESSED +/* Until my rework is finished, 8xx still needs atomic PTE updates */ +#define PTE_ATOMIC_UPDATES 1 + #else /* CONFIG_6xx */ /* Definitions for 60x, 740/750, etc. */ #define _PAGE_PRESENT 0x001 /* software: pte contains a translation */ @@ -365,6 +375,10 @@ extern int icache_44x_need_flush; #define _PMD_PRESENT 0 #define _PMD_PRESENT_MASK (PAGE_MASK) #define _PMD_BAD (~PAGE_MASK) + +/* Hash table based platforms need atomic updates of the linux PTE */ +#define PTE_ATOMIC_UPDATES 1 + #endif /* @@ -557,9 +571,11 @@ extern void add_hash_page(unsigned context, unsigned long va, * low PTE word since we expect ALL flag bits to be there */ #ifndef CONFIG_PTE_64BIT -static inline unsigned long pte_update(pte_t *p, unsigned long clr, +static inline unsigned long pte_update(pte_t *p, + unsigned long clr, unsigned long set) { +#ifdef PTE_ATOMIC_UPDATES unsigned long old, tmp; __asm__ __volatile__("\ @@ -572,16 +588,26 @@ static inline unsigned long pte_update(pte_t *p, unsigned long clr, : "=&r" (old), "=&r" (tmp), "=m" (*p) : "r" (p), "r" (clr), "r" (set), "m" (*p) : "cc" ); +#else /* PTE_ATOMIC_UPDATES */ + unsigned long old = pte_val(*p); + *p = __pte((old & ~clr) | set); +#endif /* !PTE_ATOMIC_UPDATES */ + #ifdef CONFIG_44x if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC)) icache_44x_need_flush = 1; #endif return old; } -#else -static inline unsigned long long pte_update(pte_t *p, unsigned long clr, - unsigned long set) +#else /* CONFIG_PTE_64BIT */ +/* TODO: Change that to only modify the low word and move set_pte_at() + * out of line + */ +static inline unsigned long long pte_update(pte_t *p, + unsigned long clr, + unsigned long set) { +#ifdef PTE_ATOMIC_UPDATES unsigned long long old; unsigned long tmp; @@ -596,13 +622,18 @@ static inline unsigned long long pte_update(pte_t *p, unsigned long clr, : "=&r" (old), "=&r" (tmp), "=m" (*p) : "r" (p), "r" ((unsigned long)(p) + 4), "r" (clr), "r" (set), "m" (*p) : "cc" ); +#else /* PTE_ATOMIC_UPDATES */ + unsigned long long old = pte_val(*p); + *p = __pte((old & ~(unsigned long long)clr) | set); +#endif /* !PTE_ATOMIC_UPDATES */ + #ifdef CONFIG_44x if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC)) icache_44x_need_flush = 1; #endif return old; } -#endif +#endif /* CONFIG_PTE_64BIT */ /* * set_pte stores a linux PTE into the linux page table. @@ -620,8 +651,8 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, } /* - * 2.6 calles this without flushing the TLB entry, this is wrong - * for our hash-based implementation, we fix that up here + * 2.6 calls this without flushing the TLB entry; this is wrong + * for our hash-based implementation, we fix that up here. */ #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG static inline int __ptep_test_and_clear_young(unsigned int context, unsigned long addr, pte_t *ptep) @@ -652,6 +683,12 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, { pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0); } +static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + ptep_set_wrprotect(mm, addr, ptep); +} + #define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty) @@ -665,7 +702,7 @@ static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty) ({ \ int __changed = !pte_same(*(__ptep), __entry); \ if (__changed) { \ - __ptep_set_access_flags(__ptep, __entry, __dirty); \ + __ptep_set_access_flags(__ptep, __entry, __dirty); \ flush_tlb_page_nohash(__vma, __address); \ } \ __changed; \ diff --git a/include/asm-powerpc/pgtable-ppc64.h b/include/asm-powerpc/pgtable-ppc64.h index 7686569a0bef..ab98a9c80b28 100644 --- a/include/asm-powerpc/pgtable-ppc64.h +++ b/include/asm-powerpc/pgtable-ppc64.h @@ -91,9 +91,11 @@ #define _PAGE_DIRTY 0x0080 /* C: page changed */ #define _PAGE_ACCESSED 0x0100 /* R: page referenced */ #define _PAGE_RW 0x0200 /* software: user write access allowed */ -#define _PAGE_HASHPTE 0x0400 /* software: pte has an associated HPTE */ #define _PAGE_BUSY 0x0800 /* software: PTE & hash are busy */ +/* Strong Access Ordering */ +#define _PAGE_SAO (_PAGE_WRITETHRU | _PAGE_NO_CACHE | _PAGE_COHERENT) + #define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_COHERENT) #define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY) diff --git a/include/asm-powerpc/ppc_asm.h b/include/asm-powerpc/ppc_asm.h index 2dbd4e7884fa..0966899d974b 100644 --- a/include/asm-powerpc/ppc_asm.h +++ b/include/asm-powerpc/ppc_asm.h @@ -6,6 +6,7 @@ #include <linux/stringify.h> #include <asm/asm-compat.h> +#include <asm/processor.h> #ifndef __ASSEMBLY__ #error __FILE__ should only be used in assembler files @@ -73,6 +74,15 @@ END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \ REST_10GPRS(22, base) #endif +/* + * Define what the VSX XX1 form instructions will look like, then add + * the 128 bit load store instructions based on that. + */ +#define VSX_XX1(xs, ra, rb) (((xs) & 0x1f) << 21 | ((ra) << 16) | \ + ((rb) << 11) | (((xs) >> 5))) + +#define STXVD2X(xs, ra, rb) .long (0x7c000798 | VSX_XX1((xs), (ra), (rb))) +#define LXVD2X(xs, ra, rb) .long (0x7c000698 | VSX_XX1((xs), (ra), (rb))) #define SAVE_2GPRS(n, base) SAVE_GPR(n, base); SAVE_GPR(n+1, base) #define SAVE_4GPRS(n, base) SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base) @@ -83,13 +93,13 @@ END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \ #define REST_8GPRS(n, base) REST_4GPRS(n, base); REST_4GPRS(n+4, base) #define REST_10GPRS(n, base) REST_8GPRS(n, base); REST_2GPRS(n+8, base) -#define SAVE_FPR(n, base) stfd n,THREAD_FPR0+8*(n)(base) +#define SAVE_FPR(n, base) stfd n,THREAD_FPR0+8*TS_FPRWIDTH*(n)(base) #define SAVE_2FPRS(n, base) SAVE_FPR(n, base); SAVE_FPR(n+1, base) #define SAVE_4FPRS(n, base) SAVE_2FPRS(n, base); SAVE_2FPRS(n+2, base) #define SAVE_8FPRS(n, base) SAVE_4FPRS(n, base); SAVE_4FPRS(n+4, base) #define SAVE_16FPRS(n, base) SAVE_8FPRS(n, base); SAVE_8FPRS(n+8, base) #define SAVE_32FPRS(n, base) SAVE_16FPRS(n, base); SAVE_16FPRS(n+16, base) -#define REST_FPR(n, base) lfd n,THREAD_FPR0+8*(n)(base) +#define REST_FPR(n, base) lfd n,THREAD_FPR0+8*TS_FPRWIDTH*(n)(base) #define REST_2FPRS(n, base) REST_FPR(n, base); REST_FPR(n+1, base) #define REST_4FPRS(n, base) REST_2FPRS(n, base); REST_2FPRS(n+2, base) #define REST_8FPRS(n, base) REST_4FPRS(n, base); REST_4FPRS(n+4, base) @@ -109,6 +119,33 @@ END_FTR_SECTION_IFCLR(CPU_FTR_PURR); \ #define REST_16VRS(n,b,base) REST_8VRS(n,b,base); REST_8VRS(n+8,b,base) #define REST_32VRS(n,b,base) REST_16VRS(n,b,base); REST_16VRS(n+16,b,base) +/* Save the lower 32 VSRs in the thread VSR region */ +#define SAVE_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); STXVD2X(n,b,base) +#define SAVE_2VSRS(n,b,base) SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base) +#define SAVE_4VSRS(n,b,base) SAVE_2VSRS(n,b,base); SAVE_2VSRS(n+2,b,base) +#define SAVE_8VSRS(n,b,base) SAVE_4VSRS(n,b,base); SAVE_4VSRS(n+4,b,base) +#define SAVE_16VSRS(n,b,base) SAVE_8VSRS(n,b,base); SAVE_8VSRS(n+8,b,base) +#define SAVE_32VSRS(n,b,base) SAVE_16VSRS(n,b,base); SAVE_16VSRS(n+16,b,base) +#define REST_VSR(n,b,base) li b,THREAD_VSR0+(16*(n)); LXVD2X(n,b,base) +#define REST_2VSRS(n,b,base) REST_VSR(n,b,base); REST_VSR(n+1,b,base) +#define REST_4VSRS(n,b,base) REST_2VSRS(n,b,base); REST_2VSRS(n+2,b,base) +#define REST_8VSRS(n,b,base) REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base) +#define REST_16VSRS(n,b,base) REST_8VSRS(n,b,base); REST_8VSRS(n+8,b,base) +#define REST_32VSRS(n,b,base) REST_16VSRS(n,b,base); REST_16VSRS(n+16,b,base) +/* Save the upper 32 VSRs (32-63) in the thread VSX region (0-31) */ +#define SAVE_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); STXVD2X(n+32,b,base) +#define SAVE_2VSRSU(n,b,base) SAVE_VSRU(n,b,base); SAVE_VSRU(n+1,b,base) +#define SAVE_4VSRSU(n,b,base) SAVE_2VSRSU(n,b,base); SAVE_2VSRSU(n+2,b,base) +#define SAVE_8VSRSU(n,b,base) SAVE_4VSRSU(n,b,base); SAVE_4VSRSU(n+4,b,base) +#define SAVE_16VSRSU(n,b,base) SAVE_8VSRSU(n,b,base); SAVE_8VSRSU(n+8,b,base) +#define SAVE_32VSRSU(n,b,base) SAVE_16VSRSU(n,b,base); SAVE_16VSRSU(n+16,b,base) +#define REST_VSRU(n,b,base) li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,b,base) +#define REST_2VSRSU(n,b,base) REST_VSRU(n,b,base); REST_VSRU(n+1,b,base) +#define REST_4VSRSU(n,b,base) REST_2VSRSU(n,b,base); REST_2VSRSU(n+2,b,base) +#define REST_8VSRSU(n,b,base) REST_4VSRSU(n,b,base); REST_4VSRSU(n+4,b,base) +#define REST_16VSRSU(n,b,base) REST_8VSRSU(n,b,base); REST_8VSRSU(n+8,b,base) +#define REST_32VSRSU(n,b,base) REST_16VSRSU(n,b,base); REST_16VSRSU(n+16,b,base) + #define SAVE_EVR(n,s,base) evmergehi s,s,n; stw s,THREAD_EVR0+4*(n)(base) #define SAVE_2EVRS(n,s,base) SAVE_EVR(n,s,base); SAVE_EVR(n+1,s,base) #define SAVE_4EVRS(n,s,base) SAVE_2EVRS(n,s,base); SAVE_2EVRS(n+2,s,base) @@ -356,6 +393,12 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601) #define toreal(rd) #define fromreal(rd) +/* + * We use addis to ensure compatibility with the "classic" ppc versions of + * these macros, which use rs = 0 to get the tophys offset in rd, rather than + * converting the address in r0, and so this version has to do that too + * (i.e. set register rd to 0 when rs == 0). + */ #define tophys(rd,rs) \ addis rd,rs,0 @@ -533,6 +576,73 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601) #define vr30 30 #define vr31 31 +/* VSX Registers (VSRs) */ + +#define vsr0 0 +#define vsr1 1 +#define vsr2 2 +#define vsr3 3 +#define vsr4 4 +#define vsr5 5 +#define vsr6 6 +#define vsr7 7 +#define vsr8 8 +#define vsr9 9 +#define vsr10 10 +#define vsr11 11 +#define vsr12 12 +#define vsr13 13 +#define vsr14 14 +#define vsr15 15 +#define vsr16 16 +#define vsr17 17 +#define vsr18 18 +#define vsr19 19 +#define vsr20 20 +#define vsr21 21 +#define vsr22 22 +#define vsr23 23 +#define vsr24 24 +#define vsr25 25 +#define vsr26 26 +#define vsr27 27 +#define vsr28 28 +#define vsr29 29 +#define vsr30 30 +#define vsr31 31 +#define vsr32 32 +#define vsr33 33 +#define vsr34 34 +#define vsr35 35 +#define vsr36 36 +#define vsr37 37 +#define vsr38 38 +#define vsr39 39 +#define vsr40 40 +#define vsr41 41 +#define vsr42 42 +#define vsr43 43 +#define vsr44 44 +#define vsr45 45 +#define vsr46 46 +#define vsr47 47 +#define vsr48 48 +#define vsr49 49 +#define vsr50 50 +#define vsr51 51 +#define vsr52 52 +#define vsr53 53 +#define vsr54 54 +#define vsr55 55 +#define vsr56 56 +#define vsr57 57 +#define vsr58 58 +#define vsr59 59 +#define vsr60 60 +#define vsr61 61 +#define vsr62 62 +#define vsr63 63 + /* SPE Registers (EVPRs) */ #define evr0 0 diff --git a/include/asm-powerpc/processor.h b/include/asm-powerpc/processor.h index cf83f2d7e2a5..101ed87f7d84 100644 --- a/include/asm-powerpc/processor.h +++ b/include/asm-powerpc/processor.h @@ -12,6 +12,12 @@ #include <asm/reg.h> +#ifdef CONFIG_VSX +#define TS_FPRWIDTH 2 +#else +#define TS_FPRWIDTH 1 +#endif + #ifndef __ASSEMBLY__ #include <linux/compiler.h> #include <asm/ptrace.h> @@ -78,9 +84,14 @@ extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); /* Lazy FPU handling on uni-processor */ extern struct task_struct *last_task_used_math; extern struct task_struct *last_task_used_altivec; +extern struct task_struct *last_task_used_vsx; extern struct task_struct *last_task_used_spe; #ifdef CONFIG_PPC32 + +#if CONFIG_TASK_SIZE > CONFIG_KERNEL_START +#error User TASK_SIZE overlaps with KERNEL_START address +#endif #define TASK_SIZE (CONFIG_TASK_SIZE) /* This decides where the kernel will search for a free chunk of vm @@ -136,6 +147,10 @@ typedef struct { unsigned long seg; } mm_segment_t; +#define TS_FPROFFSET 0 +#define TS_VSRLOWOFFSET 1 +#define TS_FPR(i) fpr[i][TS_FPROFFSET] + struct thread_struct { unsigned long ksp; /* Kernel stack pointer */ unsigned long ksp_limit; /* if ksp <= ksp_limit stack overflow */ @@ -152,8 +167,9 @@ struct thread_struct { unsigned long dbcr0; /* debug control register values */ unsigned long dbcr1; #endif - double fpr[32]; /* Complete floating point set */ - struct { /* fpr ... fpscr must be contiguous */ + /* FP and VSX 0-31 register set */ + double fpr[32][TS_FPRWIDTH]; + struct { unsigned int pad; unsigned int val; /* Floating point status */ @@ -173,6 +189,10 @@ struct thread_struct { unsigned long vrsave; int used_vr; /* set if process has used altivec */ #endif /* CONFIG_ALTIVEC */ +#ifdef CONFIG_VSX + /* VSR status */ + int used_vsr; /* set if process has used altivec */ +#endif /* CONFIG_VSX */ #ifdef CONFIG_SPE unsigned long evr[32]; /* upper 32-bits of SPE regs */ u64 acc; /* Accumulator */ @@ -202,7 +222,7 @@ struct thread_struct { .ksp_limit = INIT_SP_LIMIT, \ .regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \ .fs = KERNEL_DS, \ - .fpr = {0}, \ + .fpr = {{0}}, \ .fpscr = { .val = 0, }, \ .fpexc_mode = 0, \ } @@ -214,6 +234,8 @@ struct thread_struct { #define thread_saved_pc(tsk) \ ((tsk)->thread.regs? (tsk)->thread.regs->nip: 0) +#define task_pt_regs(tsk) ((struct pt_regs *)(tsk)->thread.regs) + unsigned long get_wchan(struct task_struct *p); #define KSTK_EIP(tsk) ((tsk)->thread.regs? (tsk)->thread.regs->nip: 0) diff --git a/include/asm-powerpc/prom.h b/include/asm-powerpc/prom.h index 78b7b0d494c0..eb3bd2e1c7f6 100644 --- a/include/asm-powerpc/prom.h +++ b/include/asm-powerpc/prom.h @@ -212,8 +212,16 @@ extern u64 of_translate_dma_address(struct device_node *dev, */ extern const u32 *of_get_address(struct device_node *dev, int index, u64 *size, unsigned int *flags); +#ifdef CONFIG_PCI extern const u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size, unsigned int *flags); +#else +static inline const u32 *of_get_pci_address(struct device_node *dev, + int bar_no, u64 *size, unsigned int *flags) +{ + return NULL; +} +#endif /* CONFIG_PCI */ /* Get an address as a resource. Note that if your address is * a PIO address, the conversion will fail if the physical address @@ -223,8 +231,16 @@ extern const u32 *of_get_pci_address(struct device_node *dev, int bar_no, */ extern int of_address_to_resource(struct device_node *dev, int index, struct resource *r); +#ifdef CONFIG_PCI extern int of_pci_address_to_resource(struct device_node *dev, int bar, struct resource *r); +#else +static inline int of_pci_address_to_resource(struct device_node *dev, int bar, + struct resource *r) +{ + return -ENOSYS; +} +#endif /* CONFIG_PCI */ /* Parse the ibm,dma-window property of an OF node into the busno, phys and * size parameters. diff --git a/include/asm-powerpc/ptrace.h b/include/asm-powerpc/ptrace.h index 39023dde1cc4..3d6e31024e56 100644 --- a/include/asm-powerpc/ptrace.h +++ b/include/asm-powerpc/ptrace.h @@ -119,6 +119,7 @@ extern int ptrace_put_reg(struct task_struct *task, int regno, #ifndef __powerpc64__ #define IS_CRITICAL_EXC(regs) (((regs)->trap & 2) != 0) #define IS_MCHECK_EXC(regs) (((regs)->trap & 4) != 0) +#define IS_DEBUG_EXC(regs) (((regs)->trap & 8) != 0) #endif /* ! __powerpc64__ */ #define TRAP(regs) ((regs)->trap & ~0xF) #ifdef __powerpc64__ @@ -223,6 +224,14 @@ extern void user_disable_single_step(struct task_struct *); #define PT_VRSAVE_32 (PT_VR0 + 33*4) #endif +/* + * Only store first 32 VSRs here. The second 32 VSRs in VR0-31 + */ +#define PT_VSR0 150 /* each VSR reg occupies 2 slots in 64-bit */ +#define PT_VSR31 (PT_VSR0 + 2*31) +#ifdef __KERNEL__ +#define PT_VSR0_32 300 /* each VSR reg occupies 4 slots in 32-bit */ +#endif #endif /* __powerpc64__ */ /* @@ -245,6 +254,10 @@ extern void user_disable_single_step(struct task_struct *); #define PTRACE_GETEVRREGS 20 #define PTRACE_SETEVRREGS 21 +/* Get the first 32 128bit VSX registers */ +#define PTRACE_GETVSRREGS 27 +#define PTRACE_SETVSRREGS 28 + /* * Get or set a debug register. The first 16 are DABR registers and the * second 16 are IABR registers. diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h index c3be6e2e1490..edee15d269ea 100644 --- a/include/asm-powerpc/qe.h +++ b/include/asm-powerpc/qe.h @@ -16,6 +16,8 @@ #define _ASM_POWERPC_QE_H #ifdef __KERNEL__ +#include <linux/spinlock.h> +#include <asm/cpm.h> #include <asm/immap_qe.h> #define QE_NUM_OF_SNUM 28 @@ -74,10 +76,38 @@ enum qe_clock { QE_CLK_DUMMY }; +static inline bool qe_clock_is_brg(enum qe_clock clk) +{ + return clk >= QE_BRG1 && clk <= QE_BRG16; +} + +extern spinlock_t cmxgcr_lock; + /* Export QE common operations */ -extern void qe_reset(void); +extern void __init qe_reset(void); + +/* QE PIO */ +#define QE_PIO_PINS 32 + +struct qe_pio_regs { + __be32 cpodr; /* Open drain register */ + __be32 cpdata; /* Data register */ + __be32 cpdir1; /* Direction register */ + __be32 cpdir2; /* Direction register */ + __be32 cppar1; /* Pin assignment register */ + __be32 cppar2; /* Pin assignment register */ +#ifdef CONFIG_PPC_85xx + u8 pad[8]; +#endif +}; + extern int par_io_init(struct device_node *np); extern int par_io_of_config(struct device_node *np); +#define QE_PIO_DIR_IN 2 +#define QE_PIO_DIR_OUT 1 +extern void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, + int dir, int open_drain, int assignment, + int has_irq); extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain, int assignment, int has_irq); extern int par_io_data_set(u8 port, u8 pin, u8 val); @@ -89,20 +119,13 @@ unsigned int qe_get_brg_clk(void); int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier); int qe_get_snum(void); void qe_put_snum(u8 snum); -unsigned long qe_muram_alloc(int size, int align); -int qe_muram_free(unsigned long offset); -unsigned long qe_muram_alloc_fixed(unsigned long offset, int size); -void qe_muram_dump(void); - -static inline void __iomem *qe_muram_addr(unsigned long offset) -{ - return (void __iomem *)&qe_immr->muram[offset]; -} - -static inline unsigned long qe_muram_offset(void __iomem *addr) -{ - return addr - (void __iomem *)qe_immr->muram; -} +/* we actually use cpm_muram implementation, define this for convenience */ +#define qe_muram_init cpm_muram_init +#define qe_muram_alloc cpm_muram_alloc +#define qe_muram_alloc_fixed cpm_muram_alloc_fixed +#define qe_muram_free cpm_muram_free +#define qe_muram_addr cpm_muram_addr +#define qe_muram_offset cpm_muram_offset /* Structure that defines QE firmware binary files. * @@ -156,6 +179,9 @@ int qe_upload_firmware(const struct qe_firmware *firmware); /* Obtain information on the uploaded firmware */ struct qe_firmware_info *qe_get_firmware_info(void); +/* QE USB */ +int qe_usb_clock_set(enum qe_clock clk, int rate); + /* Buffer descriptors */ struct qe_bd { __be16 status; @@ -166,20 +192,6 @@ struct qe_bd { #define BD_STATUS_MASK 0xffff0000 #define BD_LENGTH_MASK 0x0000ffff -#define BD_SC_EMPTY 0x8000 /* Receive is empty */ -#define BD_SC_READY 0x8000 /* Transmit is ready */ -#define BD_SC_WRAP 0x2000 /* Last buffer descriptor */ -#define BD_SC_INTRPT 0x1000 /* Interrupt on change */ -#define BD_SC_LAST 0x0800 /* Last buffer in frame */ -#define BD_SC_CM 0x0200 /* Continous mode */ -#define BD_SC_ID 0x0100 /* Rec'd too many idles */ -#define BD_SC_P 0x0100 /* xmt preamble */ -#define BD_SC_BR 0x0020 /* Break received */ -#define BD_SC_FR 0x0010 /* Framing error */ -#define BD_SC_PR 0x0008 /* Parity error */ -#define BD_SC_OV 0x0002 /* Overrun */ -#define BD_SC_CD 0x0001 /* ?? */ - /* Alignment */ #define QE_INTR_TABLE_ALIGN 16 /* ??? */ #define QE_ALIGNMENT_OF_BD 8 @@ -254,6 +266,16 @@ enum comm_dir { #define QE_CMXGCR_MII_ENET_MNG 0x00007000 #define QE_CMXGCR_MII_ENET_MNG_SHIFT 12 #define QE_CMXGCR_USBCS 0x0000000f +#define QE_CMXGCR_USBCS_CLK3 0x1 +#define QE_CMXGCR_USBCS_CLK5 0x2 +#define QE_CMXGCR_USBCS_CLK7 0x3 +#define QE_CMXGCR_USBCS_CLK9 0x4 +#define QE_CMXGCR_USBCS_CLK13 0x5 +#define QE_CMXGCR_USBCS_CLK17 0x6 +#define QE_CMXGCR_USBCS_CLK19 0x7 +#define QE_CMXGCR_USBCS_CLK21 0x8 +#define QE_CMXGCR_USBCS_BRG9 0x9 +#define QE_CMXGCR_USBCS_BRG10 0xa /* QE CECR Commands. */ @@ -283,7 +305,7 @@ enum comm_dir { #define QE_HPAC_START_TX 0x0000060b #define QE_HPAC_START_RX 0x0000070b #define QE_USB_STOP_TX 0x0000000a -#define QE_USB_RESTART_TX 0x0000000b +#define QE_USB_RESTART_TX 0x0000000c #define QE_QMC_STOP_TX 0x0000000c #define QE_QMC_STOP_RX 0x0000000d #define QE_SS7_SU_FIL_RESET 0x0000000e diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h index edc0cfd7f6e2..bbccadfee0d6 100644 --- a/include/asm-powerpc/reg.h +++ b/include/asm-powerpc/reg.h @@ -30,6 +30,7 @@ #define MSR_ISF_LG 61 /* Interrupt 64b mode valid on 630 */ #define MSR_HV_LG 60 /* Hypervisor state */ #define MSR_VEC_LG 25 /* Enable AltiVec */ +#define MSR_VSX_LG 23 /* Enable VSX */ #define MSR_POW_LG 18 /* Enable Power Management */ #define MSR_WE_LG 18 /* Wait State Enable */ #define MSR_TGPR_LG 17 /* TLB Update registers in use */ @@ -71,6 +72,7 @@ #endif #define MSR_VEC __MASK(MSR_VEC_LG) /* Enable AltiVec */ +#define MSR_VSX __MASK(MSR_VSX_LG) /* Enable VSX */ #define MSR_POW __MASK(MSR_POW_LG) /* Enable Power Management */ #define MSR_WE __MASK(MSR_WE_LG) /* Wait State Enable */ #define MSR_TGPR __MASK(MSR_TGPR_LG) /* TLB Update registers in use */ @@ -240,7 +242,7 @@ #define HID0_DAPUEN (1<<8) /* Debug APU enable */ #define HID0_SGE (1<<7) /* Store Gathering Enable */ #define HID0_SIED (1<<7) /* Serial Instr. Execution [Disable] */ -#define HID0_DFCA (1<<6) /* Data Cache Flush Assist */ +#define HID0_DCFA (1<<6) /* Data Cache Flush Assist */ #define HID0_LRSTK (1<<4) /* Link register stack - 745x */ #define HID0_BTIC (1<<5) /* Branch Target Instr Cache Enable */ #define HID0_ABE (1<<3) /* Address Broadcast Enable */ @@ -732,6 +734,8 @@ " .llong %1\n" \ " .llong 97b-98b\n" \ " .llong 99b-98b\n" \ + " .llong 0\n" \ + " .llong 0\n" \ ".previous" \ : "=r" (rval) : "i" (CPU_FTR_CELL_TB_BUG)); rval;}) #else diff --git a/include/asm-powerpc/reg_booke.h b/include/asm-powerpc/reg_booke.h index cf54a3f31753..be980f4ee495 100644 --- a/include/asm-powerpc/reg_booke.h +++ b/include/asm-powerpc/reg_booke.h @@ -61,6 +61,8 @@ #define SPRN_SPEFSCR 0x200 /* SPE & Embedded FP Status & Control */ #define SPRN_BBEAR 0x201 /* Branch Buffer Entry Address Register */ #define SPRN_BBTAR 0x202 /* Branch Buffer Target Address Register */ +#define SPRN_L1CFG0 0x203 /* L1 Cache Configure Register 0 */ +#define SPRN_L1CFG1 0x204 /* L1 Cache Configure Register 1 */ #define SPRN_ATB 0x20E /* Alternate Time Base */ #define SPRN_ATBL 0x20E /* Alternate Time Base Lower */ #define SPRN_ATBU 0x20F /* Alternate Time Base Upper */ @@ -78,6 +80,7 @@ #define SPRN_DSRR1 0x23F /* Debug Save and Restore Register 1 */ #define SPRN_SPRG8 0x25C /* Special Purpose Register General 8 */ #define SPRN_SPRG9 0x25D /* Special Purpose Register General 9 */ +#define SPRN_L1CSR2 0x25E /* L1 Cache Control and Status Register 2 */ #define SPRN_MAS0 0x270 /* MMU Assist Register 0 */ #define SPRN_MAS1 0x271 /* MMU Assist Register 1 */ #define SPRN_MAS2 0x272 /* MMU Assist Register 2 */ @@ -108,6 +111,8 @@ #define SPRN_L1CSR1 0x3F3 /* L1 Cache Control and Status Register 1 */ #define SPRN_PIT 0x3DB /* Programmable Interval Timer */ #define SPRN_BUCSR 0x3F5 /* Branch Unit Control and Status */ +#define SPRN_L2CSR0 0x3F9 /* L2 Data Cache Control and Status Register 0 */ +#define SPRN_L2CSR1 0x3FA /* L2 Data Cache Control and Status Register 1 */ #define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */ #define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */ #define SPRN_SVR 0x3FF /* System Version Register */ @@ -210,6 +215,7 @@ #ifdef CONFIG_BOOKE #define DBSR_IC 0x08000000 /* Instruction Completion */ #define DBSR_BT 0x04000000 /* Branch Taken */ +#define DBSR_IRPT 0x02000000 /* Exception Debug Event */ #define DBSR_TIE 0x01000000 /* Trap Instruction Event */ #define DBSR_IAC1 0x00800000 /* Instr Address Compare 1 Event */ #define DBSR_IAC2 0x00400000 /* Instr Address Compare 2 Event */ @@ -219,10 +225,14 @@ #define DBSR_DAC1W 0x00040000 /* Data Addr Compare 1 Write Event */ #define DBSR_DAC2R 0x00020000 /* Data Addr Compare 2 Read Event */ #define DBSR_DAC2W 0x00010000 /* Data Addr Compare 2 Write Event */ +#define DBSR_RET 0x00008000 /* Return Debug Event */ +#define DBSR_CIRPT 0x00000040 /* Critical Interrupt Taken Event */ +#define DBSR_CRET 0x00000020 /* Critical Return Debug Event */ #endif #ifdef CONFIG_40x #define DBSR_IC 0x80000000 /* Instruction Completion */ #define DBSR_BT 0x40000000 /* Branch taken */ +#define DBSR_IRPT 0x20000000 /* Exception Debug Event */ #define DBSR_TIE 0x10000000 /* Trap Instruction debug Event */ #define DBSR_IAC1 0x04000000 /* Instruction Address Compare 1 Event */ #define DBSR_IAC2 0x02000000 /* Instruction Address Compare 2 Event */ @@ -253,6 +263,7 @@ #define ESR_BO 0x00020000 /* Byte Ordering */ /* Bit definitions related to the DBCR0. */ +#if defined(CONFIG_40x) #define DBCR0_EDM 0x80000000 /* External Debug Mode */ #define DBCR0_IDM 0x40000000 /* Internal Debug Mode */ #define DBCR0_RST 0x30000000 /* all the bits in the RST field */ @@ -261,20 +272,69 @@ #define DBCR0_RST_CORE 0x10000000 /* Core Reset */ #define DBCR0_RST_NONE 0x00000000 /* No Reset */ #define DBCR0_IC 0x08000000 /* Instruction Completion */ +#define DBCR0_ICMP DBCR0_IC #define DBCR0_BT 0x04000000 /* Branch Taken */ +#define DBCR0_BRT DBCR0_BT #define DBCR0_EDE 0x02000000 /* Exception Debug Event */ +#define DBCR0_IRPT DBCR0_EDE #define DBCR0_TDE 0x01000000 /* TRAP Debug Event */ #define DBCR0_IA1 0x00800000 /* Instr Addr compare 1 enable */ +#define DBCR0_IAC1 DBCR0_IA1 #define DBCR0_IA2 0x00400000 /* Instr Addr compare 2 enable */ +#define DBCR0_IAC2 DBCR0_IA2 #define DBCR0_IA12 0x00200000 /* Instr Addr 1-2 range enable */ #define DBCR0_IA12X 0x00100000 /* Instr Addr 1-2 range eXclusive */ #define DBCR0_IA3 0x00080000 /* Instr Addr compare 3 enable */ +#define DBCR0_IAC3 DBCR0_IA3 #define DBCR0_IA4 0x00040000 /* Instr Addr compare 4 enable */ +#define DBCR0_IAC4 DBCR0_IA4 #define DBCR0_IA34 0x00020000 /* Instr Addr 3-4 range Enable */ #define DBCR0_IA34X 0x00010000 /* Instr Addr 3-4 range eXclusive */ #define DBCR0_IA12T 0x00008000 /* Instr Addr 1-2 range Toggle */ #define DBCR0_IA34T 0x00004000 /* Instr Addr 3-4 range Toggle */ #define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ +#elif defined(CONFIG_BOOKE) +#define DBCR0_EDM 0x80000000 /* External Debug Mode */ +#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */ +#define DBCR0_RST 0x30000000 /* all the bits in the RST field */ +/* DBCR0_RST_* is 44x specific and not followed in fsl booke */ +#define DBCR0_RST_SYSTEM 0x30000000 /* System Reset */ +#define DBCR0_RST_CHIP 0x20000000 /* Chip Reset */ +#define DBCR0_RST_CORE 0x10000000 /* Core Reset */ +#define DBCR0_RST_NONE 0x00000000 /* No Reset */ +#define DBCR0_ICMP 0x08000000 /* Instruction Completion */ +#define DBCR0_IC DBCR0_ICMP +#define DBCR0_BRT 0x04000000 /* Branch Taken */ +#define DBCR0_BT DBCR0_BRT +#define DBCR0_IRPT 0x02000000 /* Exception Debug Event */ +#define DBCR0_TDE 0x01000000 /* TRAP Debug Event */ +#define DBCR0_TIE DBCR0_TDE +#define DBCR0_IAC1 0x00800000 /* Instr Addr compare 1 enable */ +#define DBCR0_IAC2 0x00400000 /* Instr Addr compare 2 enable */ +#define DBCR0_IAC3 0x00200000 /* Instr Addr compare 3 enable */ +#define DBCR0_IAC4 0x00100000 /* Instr Addr compare 4 enable */ +#define DBCR0_DAC1R 0x00080000 /* DAC 1 Read enable */ +#define DBCR0_DAC1W 0x00040000 /* DAC 1 Write enable */ +#define DBCR0_DAC2R 0x00020000 /* DAC 2 Read enable */ +#define DBCR0_DAC2W 0x00010000 /* DAC 2 Write enable */ +#define DBCR0_RET 0x00008000 /* Return Debug Event */ +#define DBCR0_CIRPT 0x00000040 /* Critical Interrupt Taken Event */ +#define DBCR0_CRET 0x00000020 /* Critical Return Debug Event */ +#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ + +/* Bit definitions related to the DBCR1. */ +#define DBCR1_IAC12M 0x00800000 /* Instr Addr 1-2 range enable */ +#define DBCR1_IAC12MX 0x00C00000 /* Instr Addr 1-2 range eXclusive */ +#define DBCR1_IAC12AT 0x00010000 /* Instr Addr 1-2 range Toggle */ +#define DBCR1_IAC34M 0x00000080 /* Instr Addr 3-4 range enable */ +#define DBCR1_IAC34MX 0x000000C0 /* Instr Addr 3-4 range eXclusive */ +#define DBCR1_IAC34AT 0x00000001 /* Instr Addr 3-4 range Toggle */ + +/* Bit definitions related to the DBCR2. */ +#define DBCR2_DAC12M 0x00800000 /* DAC 1-2 range enable */ +#define DBCR2_DAC12MX 0x00C00000 /* DAC 1-2 range eXclusive */ +#define DBCR2_DAC12A 0x00200000 /* DAC 1-2 Asynchronous */ +#endif /* Bit definitions related to the TCR. */ #define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */ @@ -336,6 +396,20 @@ #define L1CSR1_ICFI 0x00000002 /* Instr Cache Flash Invalidate */ #define L1CSR1_ICE 0x00000001 /* Instr Cache Enable */ +/* Bit definitions for L2CSR0. */ +#define L2CSR0_L2E 0x80000000 /* L2 Cache Enable */ +#define L2CSR0_L2PE 0x40000000 /* L2 Cache Parity/ECC Enable */ +#define L2CSR0_L2WP 0x1c000000 /* L2 I/D Way Partioning */ +#define L2CSR0_L2CM 0x03000000 /* L2 Cache Coherency Mode */ +#define L2CSR0_L2FI 0x00200000 /* L2 Cache Flash Invalidate */ +#define L2CSR0_L2IO 0x00100000 /* L2 Cache Instruction Only */ +#define L2CSR0_L2DO 0x00010000 /* L2 Cache Data Only */ +#define L2CSR0_L2REP 0x00003000 /* L2 Line Replacement Algo */ +#define L2CSR0_L2FL 0x00000800 /* L2 Cache Flush */ +#define L2CSR0_L2LFC 0x00000400 /* L2 Cache Lock Flash Clear */ +#define L2CSR0_L2LOA 0x00000080 /* L2 Cache Lock Overflow Allocate */ +#define L2CSR0_L2LO 0x00000020 /* L2 Cache Lock Overflow */ + /* Bit definitions for SGR. */ #define SGR_NORMAL 0 /* Speculative fetching allowed. */ #define SGR_GUARDED 1 /* Speculative fetching disallowed. */ diff --git a/include/asm-powerpc/sigcontext.h b/include/asm-powerpc/sigcontext.h index 165d630e1cf3..9c1f24fd5d11 100644 --- a/include/asm-powerpc/sigcontext.h +++ b/include/asm-powerpc/sigcontext.h @@ -43,9 +43,44 @@ struct sigcontext { * it must be copied via a vector register to/from storage) or as a word. * The entry with index 33 contains the vrsave as the first word (offset 0) * within the quadword. + * + * Part of the VSX data is stored here also by extending vmx_restore + * by an additional 32 double words. Architecturally the layout of + * the VSR registers and how they overlap on top of the legacy FPR and + * VR registers is shown below: + * + * VSR doubleword 0 VSR doubleword 1 + * ---------------------------------------------------------------- + * VSR[0] | FPR[0] | | + * ---------------------------------------------------------------- + * VSR[1] | FPR[1] | | + * ---------------------------------------------------------------- + * | ... | | + * | ... | | + * ---------------------------------------------------------------- + * VSR[30] | FPR[30] | | + * ---------------------------------------------------------------- + * VSR[31] | FPR[31] | | + * ---------------------------------------------------------------- + * VSR[32] | VR[0] | + * ---------------------------------------------------------------- + * VSR[33] | VR[1] | + * ---------------------------------------------------------------- + * | ... | + * | ... | + * ---------------------------------------------------------------- + * VSR[62] | VR[30] | + * ---------------------------------------------------------------- + * VSR[63] | VR[31] | + * ---------------------------------------------------------------- + * + * FPR/VSR 0-31 doubleword 0 is stored in fp_regs, and VMX/VSR 32-63 + * is stored at the start of vmx_reserve. vmx_reserve is extended for + * backwards compatility to store VSR 0-31 doubleword 1 after the VMX + * registers and vscr/vrsave. */ elf_vrreg_t __user *v_regs; - long vmx_reserve[ELF_NVRREG+ELF_NVRREG+1]; + long vmx_reserve[ELF_NVRREG+ELF_NVRREG+32+1]; #endif }; diff --git a/include/asm-powerpc/smp.h b/include/asm-powerpc/smp.h index c663a1fa77c5..416d4c288cea 100644 --- a/include/asm-powerpc/smp.h +++ b/include/asm-powerpc/smp.h @@ -37,6 +37,8 @@ extern void cpu_die(void); extern void smp_send_debugger_break(int cpu); extern void smp_message_recv(int); +DECLARE_PER_CPU(unsigned int, pvr); + #ifdef CONFIG_HOTPLUG_CPU extern void fixup_irqs(cpumask_t map); int generic_cpu_disable(void); diff --git a/include/asm-powerpc/sparsemem.h b/include/asm-powerpc/sparsemem.h index 9aea8e9f0bd1..54a47ea2c3aa 100644 --- a/include/asm-powerpc/sparsemem.h +++ b/include/asm-powerpc/sparsemem.h @@ -13,6 +13,8 @@ #define MAX_PHYSADDR_BITS 44 #define MAX_PHYSMEM_BITS 44 +#endif /* CONFIG_SPARSEMEM */ + #ifdef CONFIG_MEMORY_HOTPLUG extern void create_section_mapping(unsigned long start, unsigned long end); extern int remove_section_mapping(unsigned long start, unsigned long end); @@ -26,7 +28,5 @@ static inline int hot_add_scn_to_nid(unsigned long scn_addr) #endif /* CONFIG_NUMA */ #endif /* CONFIG_MEMORY_HOTPLUG */ -#endif /* CONFIG_SPARSEMEM */ - #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_SPARSEMEM_H */ diff --git a/include/asm-powerpc/spinlock.h b/include/asm-powerpc/spinlock.h index 258c93993190..f56a843f4705 100644 --- a/include/asm-powerpc/spinlock.h +++ b/include/asm-powerpc/spinlock.h @@ -54,7 +54,7 @@ * This returns the old value in the lock, so we succeeded * in getting the lock if the return value is 0. */ -static __inline__ unsigned long __spin_trylock(raw_spinlock_t *lock) +static inline unsigned long __spin_trylock(raw_spinlock_t *lock) { unsigned long tmp, token; @@ -73,7 +73,7 @@ static __inline__ unsigned long __spin_trylock(raw_spinlock_t *lock) return tmp; } -static int __inline__ __raw_spin_trylock(raw_spinlock_t *lock) +static inline int __raw_spin_trylock(raw_spinlock_t *lock) { CLEAR_IO_SYNC; return __spin_trylock(lock) == 0; @@ -104,7 +104,7 @@ extern void __rw_yield(raw_rwlock_t *lock); #define SHARED_PROCESSOR 0 #endif -static void __inline__ __raw_spin_lock(raw_spinlock_t *lock) +static inline void __raw_spin_lock(raw_spinlock_t *lock) { CLEAR_IO_SYNC; while (1) { @@ -119,7 +119,8 @@ static void __inline__ __raw_spin_lock(raw_spinlock_t *lock) } } -static void __inline__ __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags) +static inline +void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags) { unsigned long flags_dis; @@ -139,7 +140,7 @@ static void __inline__ __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long } } -static __inline__ void __raw_spin_unlock(raw_spinlock_t *lock) +static inline void __raw_spin_unlock(raw_spinlock_t *lock) { SYNC_IO; __asm__ __volatile__("# __raw_spin_unlock\n\t" @@ -180,7 +181,7 @@ extern void __raw_spin_unlock_wait(raw_spinlock_t *lock); * This returns the old value in the lock + 1, * so we got a read lock if the return value is > 0. */ -static long __inline__ __read_trylock(raw_rwlock_t *rw) +static inline long __read_trylock(raw_rwlock_t *rw) { long tmp; @@ -204,7 +205,7 @@ static long __inline__ __read_trylock(raw_rwlock_t *rw) * This returns the old value in the lock, * so we got the write lock if the return value is 0. */ -static __inline__ long __write_trylock(raw_rwlock_t *rw) +static inline long __write_trylock(raw_rwlock_t *rw) { long tmp, token; @@ -224,7 +225,7 @@ static __inline__ long __write_trylock(raw_rwlock_t *rw) return tmp; } -static void __inline__ __raw_read_lock(raw_rwlock_t *rw) +static inline void __raw_read_lock(raw_rwlock_t *rw) { while (1) { if (likely(__read_trylock(rw) > 0)) @@ -238,7 +239,7 @@ static void __inline__ __raw_read_lock(raw_rwlock_t *rw) } } -static void __inline__ __raw_write_lock(raw_rwlock_t *rw) +static inline void __raw_write_lock(raw_rwlock_t *rw) { while (1) { if (likely(__write_trylock(rw) == 0)) @@ -252,17 +253,17 @@ static void __inline__ __raw_write_lock(raw_rwlock_t *rw) } } -static int __inline__ __raw_read_trylock(raw_rwlock_t *rw) +static inline int __raw_read_trylock(raw_rwlock_t *rw) { return __read_trylock(rw) > 0; } -static int __inline__ __raw_write_trylock(raw_rwlock_t *rw) +static inline int __raw_write_trylock(raw_rwlock_t *rw) { return __write_trylock(rw) == 0; } -static void __inline__ __raw_read_unlock(raw_rwlock_t *rw) +static inline void __raw_read_unlock(raw_rwlock_t *rw) { long tmp; @@ -279,7 +280,7 @@ static void __inline__ __raw_read_unlock(raw_rwlock_t *rw) : "cr0", "memory"); } -static __inline__ void __raw_write_unlock(raw_rwlock_t *rw) +static inline void __raw_write_unlock(raw_rwlock_t *rw) { __asm__ __volatile__("# write_unlock\n\t" LWSYNC_ON_SMP: : :"memory"); diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h index 99348c1f4cab..8b2eb044270a 100644 --- a/include/asm-powerpc/spu.h +++ b/include/asm-powerpc/spu.h @@ -191,6 +191,7 @@ struct cbe_spu_info { struct list_head spus; int n_spus; int nr_active; + atomic_t busy_spus; atomic_t reserved_spus; }; diff --git a/include/asm-powerpc/synch.h b/include/asm-powerpc/synch.h index 2cda3c38a9fa..45963e80f557 100644 --- a/include/asm-powerpc/synch.h +++ b/include/asm-powerpc/synch.h @@ -3,34 +3,42 @@ #ifdef __KERNEL__ #include <linux/stringify.h> +#include <asm/feature-fixups.h> -#ifdef __powerpc64__ -#define __SUBARCH_HAS_LWSYNC -#endif +#ifndef __ASSEMBLY__ +extern unsigned int __start___lwsync_fixup, __stop___lwsync_fixup; +extern void do_lwsync_fixups(unsigned long value, void *fixup_start, + void *fixup_end); + +static inline void eieio(void) +{ + __asm__ __volatile__ ("eieio" : : : "memory"); +} + +static inline void isync(void) +{ + __asm__ __volatile__ ("isync" : : : "memory"); +} +#endif /* __ASSEMBLY__ */ -#ifdef __SUBARCH_HAS_LWSYNC +#if defined(__powerpc64__) # define LWSYNC lwsync +#elif defined(CONFIG_E500) +# define LWSYNC \ + START_LWSYNC_SECTION(96); \ + sync; \ + MAKE_LWSYNC_SECTION_ENTRY(96, __lwsync_fixup); #else # define LWSYNC sync #endif #ifdef CONFIG_SMP #define ISYNC_ON_SMP "\n\tisync\n" -#define LWSYNC_ON_SMP __stringify(LWSYNC) "\n" +#define LWSYNC_ON_SMP stringify_in_c(LWSYNC) "\n" #else #define ISYNC_ON_SMP #define LWSYNC_ON_SMP #endif -static inline void eieio(void) -{ - __asm__ __volatile__ ("eieio" : : : "memory"); -} - -static inline void isync(void) -{ - __asm__ __volatile__ ("isync" : : : "memory"); -} - #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_SYNCH_H */ diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h index 5235f875b932..e6e25e2364eb 100644 --- a/include/asm-powerpc/system.h +++ b/include/asm-powerpc/system.h @@ -30,8 +30,8 @@ * * For wmb(), we use sync since wmb is used in drivers to order * stores to system memory with respect to writes to the device. - * However, smp_wmb() can be a lighter-weight eieio barrier on - * SMP since it is only used to order updates to system memory. + * However, smp_wmb() can be a lighter-weight lwsync or eieio barrier + * on SMP since it is only used to order updates to system memory. */ #define mb() __asm__ __volatile__ ("sync" : : : "memory") #define rmb() __asm__ __volatile__ ("sync" : : : "memory") @@ -43,9 +43,16 @@ #ifdef __KERNEL__ #define AT_VECTOR_SIZE_ARCH 6 /* entries in ARCH_DLINFO */ #ifdef CONFIG_SMP + +#ifdef __SUBARCH_HAS_LWSYNC +# define SMPWMB lwsync +#else +# define SMPWMB eieio +#endif + #define smp_mb() mb() #define smp_rmb() rmb() -#define smp_wmb() eieio() +#define smp_wmb() __asm__ __volatile__ (__stringify(SMPWMB) : : :"memory") #define smp_read_barrier_depends() read_barrier_depends() #else #define smp_mb() barrier() @@ -132,6 +139,8 @@ extern void enable_kernel_altivec(void); extern void giveup_altivec(struct task_struct *); extern void load_up_altivec(struct task_struct *); extern int emulate_altivec(struct pt_regs *); +extern void __giveup_vsx(struct task_struct *); +extern void giveup_vsx(struct task_struct *); extern void enable_kernel_spe(void); extern void giveup_spe(struct task_struct *); extern void load_up_spe(struct task_struct *); @@ -155,6 +164,14 @@ static inline void flush_altivec_to_thread(struct task_struct *t) } #endif +#ifdef CONFIG_VSX +extern void flush_vsx_to_thread(struct task_struct *); +#else +static inline void flush_vsx_to_thread(struct task_struct *t) +{ +} +#endif + #ifdef CONFIG_SPE extern void flush_spe_to_thread(struct task_struct *); #else @@ -190,6 +207,7 @@ extern struct task_struct *_switch(struct thread_struct *prev, extern unsigned int rtas_data; extern int mem_init_done; /* set on boot once kmalloc can be called */ +extern int init_bootmem_done; /* set on !NUMA once bootmem is available */ extern unsigned long memory_limit; extern unsigned long klimit; @@ -518,54 +536,6 @@ extern void reloc_got2(unsigned long); #define PTRRELOC(x) ((typeof(x)) add_reloc_offset((unsigned long)(x))) -static inline void create_instruction(unsigned long addr, unsigned int instr) -{ - unsigned int *p; - p = (unsigned int *)addr; - *p = instr; - asm ("dcbst 0, %0; sync; icbi 0,%0; sync; isync" : : "r" (p)); -} - -/* Flags for create_branch: - * "b" == create_branch(addr, target, 0); - * "ba" == create_branch(addr, target, BRANCH_ABSOLUTE); - * "bl" == create_branch(addr, target, BRANCH_SET_LINK); - * "bla" == create_branch(addr, target, BRANCH_ABSOLUTE | BRANCH_SET_LINK); - */ -#define BRANCH_SET_LINK 0x1 -#define BRANCH_ABSOLUTE 0x2 - -static inline void create_branch(unsigned long addr, - unsigned long target, int flags) -{ - unsigned int instruction; - - if (! (flags & BRANCH_ABSOLUTE)) - target = target - addr; - - /* Mask out the flags and target, so they don't step on each other. */ - instruction = 0x48000000 | (flags & 0x3) | (target & 0x03FFFFFC); - - create_instruction(addr, instruction); -} - -static inline void create_function_call(unsigned long addr, void * func) -{ - unsigned long func_addr; - -#ifdef CONFIG_PPC64 - /* - * On PPC64 the function pointer actually points to the function's - * descriptor. The first entry in the descriptor is the address - * of the function text. - */ - func_addr = *(unsigned long *)func; -#else - func_addr = (unsigned long)func; -#endif - create_branch(addr, func_addr, BRANCH_SET_LINK); -} - #ifdef CONFIG_VIRT_CPU_ACCOUNTING extern void account_system_vtime(struct task_struct *); #endif diff --git a/include/asm-powerpc/thread_info.h b/include/asm-powerpc/thread_info.h index d030f5ce39ad..b705c2a7651a 100644 --- a/include/asm-powerpc/thread_info.h +++ b/include/asm-powerpc/thread_info.h @@ -116,7 +116,6 @@ static inline struct thread_info *current_thread_info(void) #define TIF_SECCOMP 10 /* secure computing */ #define TIF_RESTOREALL 11 /* Restore all regs (implies NOERROR) */ #define TIF_NOERROR 12 /* Force successful syscall return */ -#define TIF_RESTORE_SIGMASK 13 /* Restore signal mask in do_signal */ #define TIF_FREEZE 14 /* Freezing for suspend */ #define TIF_RUNLATCH 15 /* Is the runlatch enabled? */ #define TIF_ABI_PENDING 16 /* 32/64 bit switch needed */ @@ -134,21 +133,33 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_SECCOMP (1<<TIF_SECCOMP) #define _TIF_RESTOREALL (1<<TIF_RESTOREALL) #define _TIF_NOERROR (1<<TIF_NOERROR) -#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK) #define _TIF_FREEZE (1<<TIF_FREEZE) #define _TIF_RUNLATCH (1<<TIF_RUNLATCH) #define _TIF_ABI_PENDING (1<<TIF_ABI_PENDING) #define _TIF_SYSCALL_T_OR_A (_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP) -#define _TIF_USER_WORK_MASK ( _TIF_SIGPENDING | \ - _TIF_NEED_RESCHED | _TIF_RESTORE_SIGMASK) +#define _TIF_USER_WORK_MASK (_TIF_SIGPENDING | _TIF_NEED_RESCHED) #define _TIF_PERSYSCALL_MASK (_TIF_RESTOREALL|_TIF_NOERROR) /* Bits in local_flags */ /* Don't move TLF_NAPPING without adjusting the code in entry_32.S */ #define TLF_NAPPING 0 /* idle thread enabled NAP mode */ +#define TLF_SLEEPING 1 /* suspend code enabled SLEEP mode */ +#define TLF_RESTORE_SIGMASK 2 /* Restore signal mask in do_signal */ #define _TLF_NAPPING (1 << TLF_NAPPING) +#define _TLF_SLEEPING (1 << TLF_SLEEPING) +#define _TLF_RESTORE_SIGMASK (1 << TLF_RESTORE_SIGMASK) + +#ifndef __ASSEMBLY__ +#define HAVE_SET_RESTORE_SIGMASK 1 +static inline void set_restore_sigmask(void) +{ + struct thread_info *ti = current_thread_info(); + ti->local_flags |= _TLF_RESTORE_SIGMASK; + set_bit(TIF_SIGPENDING, &ti->flags); +} +#endif /* !__ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/time.h b/include/asm-powerpc/time.h index ce5de6e0e690..febd581ec9b0 100644 --- a/include/asm-powerpc/time.h +++ b/include/asm-powerpc/time.h @@ -33,6 +33,7 @@ extern unsigned tb_to_us; struct rtc_time; extern void to_tm(int tim, struct rtc_time * tm); +extern void GregorianDay(struct rtc_time *tm); extern time_t last_rtc_update; extern void generic_calibrate_decr(void); diff --git a/include/asm-powerpc/timex.h b/include/asm-powerpc/timex.h index 92dedde761d1..c55e14f7ef44 100644 --- a/include/asm-powerpc/timex.h +++ b/include/asm-powerpc/timex.h @@ -38,6 +38,8 @@ static inline cycles_t get_cycles(void) " .long 0\n" " .long 97b-98b\n" " .long 99b-98b\n" + " .long 0\n" + " .long 0\n" ".previous" : "=r" (ret) : "i" (CPU_FTR_601)); return ret; diff --git a/include/asm-powerpc/xmon.h b/include/asm-powerpc/xmon.h index 88320a05f0a8..5eb8e599e5cc 100644 --- a/include/asm-powerpc/xmon.h +++ b/include/asm-powerpc/xmon.h @@ -12,13 +12,22 @@ #ifdef __KERNEL__ +#include <linux/irqreturn.h> + #ifdef CONFIG_XMON extern void xmon_setup(void); extern void xmon_register_spus(struct list_head *list); +struct pt_regs; +extern int xmon(struct pt_regs *excp); +extern irqreturn_t xmon_irq(int, void *); #else static inline void xmon_setup(void) { }; static inline void xmon_register_spus(struct list_head *list) { }; #endif +#if defined(CONFIG_XMON) && defined(CONFIG_SMP) +extern int cpus_are_in_xmon(void); +#endif + #endif /* __KERNEL __ */ #endif /* __ASM_POWERPC_XMON_H */ diff --git a/include/asm-ppc/8xx_immap.h b/include/asm-ppc/8xx_immap.h deleted file mode 100644 index 4b0e15206006..000000000000 --- a/include/asm-ppc/8xx_immap.h +++ /dev/null @@ -1,564 +0,0 @@ -/* - * MPC8xx Internal Memory Map - * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) - * - * The I/O on the MPC860 is comprised of blocks of special registers - * and the dual port ram for the Communication Processor Module. - * Within this space are functional units such as the SIU, memory - * controller, system timers, and other control functions. It is - * a combination that I found difficult to separate into logical - * functional files.....but anyone else is welcome to try. -- Dan - */ -#ifdef __KERNEL__ -#ifndef __IMMAP_8XX__ -#define __IMMAP_8XX__ - -/* System configuration registers. -*/ -typedef struct sys_conf { - uint sc_siumcr; - uint sc_sypcr; - uint sc_swt; - char res1[2]; - ushort sc_swsr; - uint sc_sipend; - uint sc_simask; - uint sc_siel; - uint sc_sivec; - uint sc_tesr; - char res2[0xc]; - uint sc_sdcr; - char res3[0x4c]; -} sysconf8xx_t; - -/* PCMCIA configuration registers. -*/ -typedef struct pcmcia_conf { - uint pcmc_pbr0; - uint pcmc_por0; - uint pcmc_pbr1; - uint pcmc_por1; - uint pcmc_pbr2; - uint pcmc_por2; - uint pcmc_pbr3; - uint pcmc_por3; - uint pcmc_pbr4; - uint pcmc_por4; - uint pcmc_pbr5; - uint pcmc_por5; - uint pcmc_pbr6; - uint pcmc_por6; - uint pcmc_pbr7; - uint pcmc_por7; - char res1[0x20]; - uint pcmc_pgcra; - uint pcmc_pgcrb; - uint pcmc_pscr; - char res2[4]; - uint pcmc_pipr; - char res3[4]; - uint pcmc_per; - char res4[4]; -} pcmconf8xx_t; - -/* Memory controller registers. -*/ -typedef struct mem_ctlr { - uint memc_br0; - uint memc_or0; - uint memc_br1; - uint memc_or1; - uint memc_br2; - uint memc_or2; - uint memc_br3; - uint memc_or3; - uint memc_br4; - uint memc_or4; - uint memc_br5; - uint memc_or5; - uint memc_br6; - uint memc_or6; - uint memc_br7; - uint memc_or7; - char res1[0x24]; - uint memc_mar; - uint memc_mcr; - char res2[4]; - uint memc_mamr; - uint memc_mbmr; - ushort memc_mstat; - ushort memc_mptpr; - uint memc_mdr; - char res3[0x80]; -} memctl8xx_t; - -/*----------------------------------------------------------------------- - * BR - Memory Controler: Base Register 16-9 - */ -#define BR_BA_MSK 0xffff8000 /* Base Address Mask */ -#define BR_AT_MSK 0x00007000 /* Address Type Mask */ -#define BR_PS_MSK 0x00000c00 /* Port Size Mask */ -#define BR_PS_32 0x00000000 /* 32 bit port size */ -#define BR_PS_16 0x00000800 /* 16 bit port size */ -#define BR_PS_8 0x00000400 /* 8 bit port size */ -#define BR_PARE 0x00000200 /* Parity Enable */ -#define BR_WP 0x00000100 /* Write Protect */ -#define BR_MS_MSK 0x000000c0 /* Machine Select Mask */ -#define BR_MS_GPCM 0x00000000 /* G.P.C.M. Machine Select */ -#define BR_MS_UPMA 0x00000080 /* U.P.M.A Machine Select */ -#define BR_MS_UPMB 0x000000c0 /* U.P.M.B Machine Select */ -#define BR_V 0x00000001 /* Bank Valid */ - -/*----------------------------------------------------------------------- - * OR - Memory Controler: Option Register 16-11 - */ -#define OR_AM_MSK 0xffff8000 /* Address Mask Mask */ -#define OR_ATM_MSK 0x00007000 /* Address Type Mask Mask */ -#define OR_CSNT_SAM 0x00000800 /* Chip Select Negation Time/ Start */ - /* Address Multiplex */ -#define OR_ACS_MSK 0x00000600 /* Address to Chip Select Setup mask */ -#define OR_ACS_DIV1 0x00000000 /* CS is output at the same time */ -#define OR_ACS_DIV4 0x00000400 /* CS is output 1/4 a clock later */ -#define OR_ACS_DIV2 0x00000600 /* CS is output 1/2 a clock later */ -#define OR_G5LA 0x00000400 /* Output #GPL5 on #GPL_A5 */ -#define OR_G5LS 0x00000200 /* Drive #GPL high on falling edge of...*/ -#define OR_BI 0x00000100 /* Burst inhibit */ -#define OR_SCY_MSK 0x000000f0 /* Cycle Length in Clocks */ -#define OR_SCY_0_CLK 0x00000000 /* 0 clock cycles wait states */ -#define OR_SCY_1_CLK 0x00000010 /* 1 clock cycles wait states */ -#define OR_SCY_2_CLK 0x00000020 /* 2 clock cycles wait states */ -#define OR_SCY_3_CLK 0x00000030 /* 3 clock cycles wait states */ -#define OR_SCY_4_CLK 0x00000040 /* 4 clock cycles wait states */ -#define OR_SCY_5_CLK 0x00000050 /* 5 clock cycles wait states */ -#define OR_SCY_6_CLK 0x00000060 /* 6 clock cycles wait states */ -#define OR_SCY_7_CLK 0x00000070 /* 7 clock cycles wait states */ -#define OR_SCY_8_CLK 0x00000080 /* 8 clock cycles wait states */ -#define OR_SCY_9_CLK 0x00000090 /* 9 clock cycles wait states */ -#define OR_SCY_10_CLK 0x000000a0 /* 10 clock cycles wait states */ -#define OR_SCY_11_CLK 0x000000b0 /* 11 clock cycles wait states */ -#define OR_SCY_12_CLK 0x000000c0 /* 12 clock cycles wait states */ -#define OR_SCY_13_CLK 0x000000d0 /* 13 clock cycles wait states */ -#define OR_SCY_14_CLK 0x000000e0 /* 14 clock cycles wait states */ -#define OR_SCY_15_CLK 0x000000f0 /* 15 clock cycles wait states */ -#define OR_SETA 0x00000008 /* External Transfer Acknowledge */ -#define OR_TRLX 0x00000004 /* Timing Relaxed */ -#define OR_EHTR 0x00000002 /* Extended Hold Time on Read */ - -/* System Integration Timers. -*/ -typedef struct sys_int_timers { - ushort sit_tbscr; - char res0[0x02]; - uint sit_tbreff0; - uint sit_tbreff1; - char res1[0x14]; - ushort sit_rtcsc; - char res2[0x02]; - uint sit_rtc; - uint sit_rtsec; - uint sit_rtcal; - char res3[0x10]; - ushort sit_piscr; - char res4[2]; - uint sit_pitc; - uint sit_pitr; - char res5[0x34]; -} sit8xx_t; - -#define TBSCR_TBIRQ_MASK ((ushort)0xff00) -#define TBSCR_REFA ((ushort)0x0080) -#define TBSCR_REFB ((ushort)0x0040) -#define TBSCR_REFAE ((ushort)0x0008) -#define TBSCR_REFBE ((ushort)0x0004) -#define TBSCR_TBF ((ushort)0x0002) -#define TBSCR_TBE ((ushort)0x0001) - -#define RTCSC_RTCIRQ_MASK ((ushort)0xff00) -#define RTCSC_SEC ((ushort)0x0080) -#define RTCSC_ALR ((ushort)0x0040) -#define RTCSC_38K ((ushort)0x0010) -#define RTCSC_SIE ((ushort)0x0008) -#define RTCSC_ALE ((ushort)0x0004) -#define RTCSC_RTF ((ushort)0x0002) -#define RTCSC_RTE ((ushort)0x0001) - -#define PISCR_PIRQ_MASK ((ushort)0xff00) -#define PISCR_PS ((ushort)0x0080) -#define PISCR_PIE ((ushort)0x0004) -#define PISCR_PTF ((ushort)0x0002) -#define PISCR_PTE ((ushort)0x0001) - -/* Clocks and Reset. -*/ -typedef struct clk_and_reset { - uint car_sccr; - uint car_plprcr; - uint car_rsr; - char res[0x74]; /* Reserved area */ -} car8xx_t; - -/* System Integration Timers keys. -*/ -typedef struct sitk { - uint sitk_tbscrk; - uint sitk_tbreff0k; - uint sitk_tbreff1k; - uint sitk_tbk; - char res1[0x10]; - uint sitk_rtcsck; - uint sitk_rtck; - uint sitk_rtseck; - uint sitk_rtcalk; - char res2[0x10]; - uint sitk_piscrk; - uint sitk_pitck; - char res3[0x38]; -} sitk8xx_t; - -/* Clocks and reset keys. -*/ -typedef struct cark { - uint cark_sccrk; - uint cark_plprcrk; - uint cark_rsrk; - char res[0x474]; -} cark8xx_t; - -/* The key to unlock registers maintained by keep-alive power. -*/ -#define KAPWR_KEY ((unsigned int)0x55ccaa33) - -/* Video interface. MPC823 Only. -*/ -typedef struct vid823 { - ushort vid_vccr; - ushort res1; - u_char vid_vsr; - u_char res2; - u_char vid_vcmr; - u_char res3; - uint vid_vbcb; - uint res4; - uint vid_vfcr0; - uint vid_vfaa0; - uint vid_vfba0; - uint vid_vfcr1; - uint vid_vfaa1; - uint vid_vfba1; - u_char res5[0x18]; -} vid823_t; - -/* LCD interface. 823 Only. -*/ -typedef struct lcd { - uint lcd_lccr; - uint lcd_lchcr; - uint lcd_lcvcr; - char res1[4]; - uint lcd_lcfaa; - uint lcd_lcfba; - char lcd_lcsr; - char res2[0x7]; -} lcd823_t; - -/* I2C -*/ -typedef struct i2c { - u_char i2c_i2mod; - char res1[3]; - u_char i2c_i2add; - char res2[3]; - u_char i2c_i2brg; - char res3[3]; - u_char i2c_i2com; - char res4[3]; - u_char i2c_i2cer; - char res5[3]; - u_char i2c_i2cmr; - char res6[0x8b]; -} i2c8xx_t; - -/* DMA control/status registers. -*/ -typedef struct sdma_csr { - char res1[4]; - uint sdma_sdar; - u_char sdma_sdsr; - char res3[3]; - u_char sdma_sdmr; - char res4[3]; - u_char sdma_idsr1; - char res5[3]; - u_char sdma_idmr1; - char res6[3]; - u_char sdma_idsr2; - char res7[3]; - u_char sdma_idmr2; - char res8[0x13]; -} sdma8xx_t; - -/* Communication Processor Module Interrupt Controller. -*/ -typedef struct cpm_ic { - ushort cpic_civr; - char res[0xe]; - uint cpic_cicr; - uint cpic_cipr; - uint cpic_cimr; - uint cpic_cisr; -} cpic8xx_t; - -/* Input/Output Port control/status registers. -*/ -typedef struct io_port { - ushort iop_padir; - ushort iop_papar; - ushort iop_paodr; - ushort iop_padat; - char res1[8]; - ushort iop_pcdir; - ushort iop_pcpar; - ushort iop_pcso; - ushort iop_pcdat; - ushort iop_pcint; - char res2[6]; - ushort iop_pddir; - ushort iop_pdpar; - char res3[2]; - ushort iop_pddat; - uint utmode; - char res4[4]; -} iop8xx_t; - -/* Communication Processor Module Timers -*/ -typedef struct cpm_timers { - ushort cpmt_tgcr; - char res1[0xe]; - ushort cpmt_tmr1; - ushort cpmt_tmr2; - ushort cpmt_trr1; - ushort cpmt_trr2; - ushort cpmt_tcr1; - ushort cpmt_tcr2; - ushort cpmt_tcn1; - ushort cpmt_tcn2; - ushort cpmt_tmr3; - ushort cpmt_tmr4; - ushort cpmt_trr3; - ushort cpmt_trr4; - ushort cpmt_tcr3; - ushort cpmt_tcr4; - ushort cpmt_tcn3; - ushort cpmt_tcn4; - ushort cpmt_ter1; - ushort cpmt_ter2; - ushort cpmt_ter3; - ushort cpmt_ter4; - char res2[8]; -} cpmtimer8xx_t; - -/* Finally, the Communication Processor stuff..... -*/ -typedef struct scc { /* Serial communication channels */ - uint scc_gsmrl; - uint scc_gsmrh; - ushort scc_psmr; - char res1[2]; - ushort scc_todr; - ushort scc_dsr; - ushort scc_scce; - char res2[2]; - ushort scc_sccm; - char res3; - u_char scc_sccs; - char res4[8]; -} scc_t; - -typedef struct smc { /* Serial management channels */ - char res1[2]; - ushort smc_smcmr; - char res2[2]; - u_char smc_smce; - char res3[3]; - u_char smc_smcm; - char res4[5]; -} smc_t; - -/* MPC860T Fast Ethernet Controller. It isn't part of the CPM, but - * it fits within the address space. - */ - -typedef struct fec { - uint fec_addr_low; /* lower 32 bits of station address */ - ushort fec_addr_high; /* upper 16 bits of station address */ - ushort res1; /* reserved */ - uint fec_hash_table_high; /* upper 32-bits of hash table */ - uint fec_hash_table_low; /* lower 32-bits of hash table */ - uint fec_r_des_start; /* beginning of Rx descriptor ring */ - uint fec_x_des_start; /* beginning of Tx descriptor ring */ - uint fec_r_buff_size; /* Rx buffer size */ - uint res2[9]; /* reserved */ - uint fec_ecntrl; /* ethernet control register */ - uint fec_ievent; /* interrupt event register */ - uint fec_imask; /* interrupt mask register */ - uint fec_ivec; /* interrupt level and vector status */ - uint fec_r_des_active; /* Rx ring updated flag */ - uint fec_x_des_active; /* Tx ring updated flag */ - uint res3[10]; /* reserved */ - uint fec_mii_data; /* MII data register */ - uint fec_mii_speed; /* MII speed control register */ - uint res4[17]; /* reserved */ - uint fec_r_bound; /* end of RAM (read-only) */ - uint fec_r_fstart; /* Rx FIFO start address */ - uint res5[6]; /* reserved */ - uint fec_x_fstart; /* Tx FIFO start address */ - uint res6[17]; /* reserved */ - uint fec_fun_code; /* fec SDMA function code */ - uint res7[3]; /* reserved */ - uint fec_r_cntrl; /* Rx control register */ - uint fec_r_hash; /* Rx hash register */ - uint res8[14]; /* reserved */ - uint fec_x_cntrl; /* Tx control register */ - uint res9[0x1e]; /* reserved */ -} fec_t; - -/* The FEC and LCD color map share the same address space.... - * I guess we will never see an 823T :-). - */ -union fec_lcd { - fec_t fl_un_fec; - u_char fl_un_cmap[0x200]; -}; - -typedef struct comm_proc { - /* General control and status registers. - */ - ushort cp_cpcr; - u_char res1[2]; - ushort cp_rccr; - u_char res2; - u_char cp_rmds; - u_char res3[4]; - ushort cp_cpmcr1; - ushort cp_cpmcr2; - ushort cp_cpmcr3; - ushort cp_cpmcr4; - u_char res4[2]; - ushort cp_rter; - u_char res5[2]; - ushort cp_rtmr; - u_char res6[0x14]; - - /* Baud rate generators. - */ - uint cp_brgc1; - uint cp_brgc2; - uint cp_brgc3; - uint cp_brgc4; - - /* Serial Communication Channels. - */ - scc_t cp_scc[4]; - - /* Serial Management Channels. - */ - smc_t cp_smc[2]; - - /* Serial Peripheral Interface. - */ - ushort cp_spmode; - u_char res7[4]; - u_char cp_spie; - u_char res8[3]; - u_char cp_spim; - u_char res9[2]; - u_char cp_spcom; - u_char res10[2]; - - /* Parallel Interface Port. - */ - u_char res11[2]; - ushort cp_pipc; - u_char res12[2]; - ushort cp_ptpr; - uint cp_pbdir; - uint cp_pbpar; - u_char res13[2]; - ushort cp_pbodr; - uint cp_pbdat; - - /* Port E - MPC87x/88x only. - */ - uint cp_pedir; - uint cp_pepar; - uint cp_peso; - uint cp_peodr; - uint cp_pedat; - - /* Communications Processor Timing Register - - Contains RMII Timing for the FECs on MPC87x/88x only. - */ - uint cp_cptr; - - /* Serial Interface and Time Slot Assignment. - */ - uint cp_simode; - u_char cp_sigmr; - u_char res15; - u_char cp_sistr; - u_char cp_sicmr; - u_char res16[4]; - uint cp_sicr; - uint cp_sirp; - u_char res17[0xc]; - - /* 256 bytes of MPC823 video controller RAM array. - */ - u_char cp_vcram[0x100]; - u_char cp_siram[0x200]; - - /* The fast ethernet controller is not really part of the CPM, - * but it resides in the address space. - * The LCD color map is also here. - */ - union fec_lcd fl_un; -#define cp_fec fl_un.fl_un_fec -#define lcd_cmap fl_un.fl_un_cmap - char res18[0xE00]; - - /* The DUET family has a second FEC here */ - fec_t cp_fec2; -#define cp_fec1 cp_fec /* consistency macro */ - - /* Dual Ported RAM follows. - * There are many different formats for this memory area - * depending upon the devices used and options chosen. - * Some processors don't have all of it populated. - */ - u_char cp_dpmem[0x1C00]; /* BD / Data / ucode */ - u_char cp_dparam[0x400]; /* Parameter RAM */ -} cpm8xx_t; - -/* Internal memory map. -*/ -typedef struct immap { - sysconf8xx_t im_siu_conf; /* SIU Configuration */ - pcmconf8xx_t im_pcmcia; /* PCMCIA Configuration */ - memctl8xx_t im_memctl; /* Memory Controller */ - sit8xx_t im_sit; /* System integration timers */ - car8xx_t im_clkrst; /* Clocks and reset */ - sitk8xx_t im_sitk; /* Sys int timer keys */ - cark8xx_t im_clkrstk; /* Clocks and reset keys */ - vid823_t im_vid; /* Video (823 only) */ - lcd823_t im_lcd; /* LCD (823 only) */ - i2c8xx_t im_i2c; /* I2C control/status */ - sdma8xx_t im_sdma; /* SDMA control/status */ - cpic8xx_t im_cpic; /* CPM Interrupt Controller */ - iop8xx_t im_ioport; /* IO Port control/status */ - cpmtimer8xx_t im_cpmtimer; /* CPM timers */ - cpm8xx_t im_cpm; /* Communication processor */ -} immap_t; - -#endif /* __IMMAP_8XX__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/amigayle.h b/include/asm-ppc/amigayle.h deleted file mode 100644 index 1fe0b87859b0..000000000000 --- a/include/asm-ppc/amigayle.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/amigayle.h> diff --git a/include/asm-ppc/amipcmcia.h b/include/asm-ppc/amipcmcia.h deleted file mode 100644 index 3f65f63f508f..000000000000 --- a/include/asm-ppc/amipcmcia.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/amipcmcia.h> diff --git a/include/asm-ppc/bootinfo.h b/include/asm-ppc/bootinfo.h deleted file mode 100644 index f6ed77aee328..000000000000 --- a/include/asm-ppc/bootinfo.h +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Non-machine dependent bootinfo structure. Basic idea - * borrowed from the m68k. - * - * Copyright (C) 1999 Cort Dougan <cort@ppc.kernel.org> - */ - -#ifdef __KERNEL__ -#ifndef _PPC_BOOTINFO_H -#define _PPC_BOOTINFO_H - -#include <asm/page.h> - -struct bi_record { - unsigned long tag; /* tag ID */ - unsigned long size; /* size of record (in bytes) */ - unsigned long data[0]; /* data */ -}; - -#define BI_FIRST 0x1010 /* first record - marker */ -#define BI_LAST 0x1011 /* last record - marker */ -#define BI_CMD_LINE 0x1012 -#define BI_BOOTLOADER_ID 0x1013 -#define BI_INITRD 0x1014 -#define BI_SYSMAP 0x1015 -#define BI_MACHTYPE 0x1016 -#define BI_MEMSIZE 0x1017 -#define BI_BOARD_INFO 0x1018 - -extern struct bi_record *find_bootinfo(void); -extern void bootinfo_init(struct bi_record *rec); -extern void bootinfo_append(unsigned long tag, unsigned long size, void * data); -extern void parse_bootinfo(struct bi_record *rec); -extern unsigned long boot_mem_size; - -static inline struct bi_record * -bootinfo_addr(unsigned long offset) -{ - - return (struct bi_record *)_ALIGN((offset) + (1 << 20) - 1, - (1 << 20)); -} - - -#endif /* _PPC_BOOTINFO_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/bootx.h b/include/asm-ppc/bootx.h deleted file mode 100644 index b0c51b45d7a2..000000000000 --- a/include/asm-ppc/bootx.h +++ /dev/null @@ -1,135 +0,0 @@ -/* - * This file describes the structure passed from the BootX application - * (for MacOS) when it is used to boot Linux. - * - * Written by Benjamin Herrenschmidt. - */ - - -#ifndef __ASM_BOOTX_H__ -#define __ASM_BOOTX_H__ - -#ifdef macintosh -#include <Types.h> -#include "linux_type_defs.h" -#endif - -#ifdef macintosh -/* All this requires PowerPC alignment */ -#pragma options align=power -#endif - -/* On kernel entry: - * - * r3 = 0x426f6f58 ('BooX') - * r4 = pointer to boot_infos - * r5 = NULL - * - * Data and instruction translation disabled, interrupts - * disabled, kernel loaded at physical 0x00000000 on PCI - * machines (will be different on NuBus). - */ - -#define BOOT_INFO_VERSION 5 -#define BOOT_INFO_COMPATIBLE_VERSION 1 - -/* Bit in the architecture flag mask. More to be defined in - future versions. Note that either BOOT_ARCH_PCI or - BOOT_ARCH_NUBUS is set. The other BOOT_ARCH_NUBUS_xxx are - set additionally when BOOT_ARCH_NUBUS is set. - */ -#define BOOT_ARCH_PCI 0x00000001UL -#define BOOT_ARCH_NUBUS 0x00000002UL -#define BOOT_ARCH_NUBUS_PDM 0x00000010UL -#define BOOT_ARCH_NUBUS_PERFORMA 0x00000020UL -#define BOOT_ARCH_NUBUS_POWERBOOK 0x00000040UL - -/* Maximum number of ranges in phys memory map */ -#define MAX_MEM_MAP_SIZE 26 - -/* This is the format of an element in the physical memory map. Note that - the map is optional and current BootX will only build it for pre-PCI - machines */ -typedef struct boot_info_map_entry -{ - __u32 physAddr; /* Physical starting address */ - __u32 size; /* Size in bytes */ -} boot_info_map_entry_t; - - -/* Here are the boot informations that are passed to the bootstrap - * Note that the kernel arguments and the device tree are appended - * at the end of this structure. */ -typedef struct boot_infos -{ - /* Version of this structure */ - __u32 version; - /* backward compatible down to version: */ - __u32 compatible_version; - - /* NEW (vers. 2) this holds the current _logical_ base addr of - the frame buffer (for use by early boot message) */ - __u8* logicalDisplayBase; - - /* NEW (vers. 4) Apple's machine identification */ - __u32 machineID; - - /* NEW (vers. 4) Detected hw architecture */ - __u32 architecture; - - /* The device tree (internal addresses relative to the beginning of the tree, - * device tree offset relative to the beginning of this structure). - * On pre-PCI macintosh (BOOT_ARCH_PCI bit set to 0 in architecture), this - * field is 0. - */ - __u32 deviceTreeOffset; /* Device tree offset */ - __u32 deviceTreeSize; /* Size of the device tree */ - - /* Some infos about the current MacOS display */ - __u32 dispDeviceRect[4]; /* left,top,right,bottom */ - __u32 dispDeviceDepth; /* (8, 16 or 32) */ - __u8* dispDeviceBase; /* base address (physical) */ - __u32 dispDeviceRowBytes; /* rowbytes (in bytes) */ - __u32 dispDeviceColorsOffset; /* Colormap (8 bits only) or 0 (*) */ - /* Optional offset in the registry to the current - * MacOS display. (Can be 0 when not detected) */ - __u32 dispDeviceRegEntryOffset; - - /* Optional pointer to boot ramdisk (offset from this structure) */ - __u32 ramDisk; - __u32 ramDiskSize; /* size of ramdisk image */ - - /* Kernel command line arguments (offset from this structure) */ - __u32 kernelParamsOffset; - - /* ALL BELOW NEW (vers. 4) */ - - /* This defines the physical memory. Valid with BOOT_ARCH_NUBUS flag - (non-PCI) only. On PCI, memory is contiguous and it's size is in the - device-tree. */ - boot_info_map_entry_t - physMemoryMap[MAX_MEM_MAP_SIZE]; /* Where the phys memory is */ - __u32 physMemoryMapSize; /* How many entries in map */ - - - /* The framebuffer size (optional, currently 0) */ - __u32 frameBufferSize; /* Represents a max size, can be 0. */ - - /* NEW (vers. 5) */ - - /* Total params size (args + colormap + device tree + ramdisk) */ - __u32 totalParamsSize; - -} boot_infos_t; - -/* (*) The format of the colormap is 256 * 3 * 2 bytes. Each color index is represented - * by 3 short words containing a 16 bits (unsigned) color component. - * Later versions may contain the gamma table for direct-color devices here. - */ -#define BOOTX_COLORTABLE_SIZE (256UL*3UL*2UL) - -#ifdef macintosh -#pragma options align=reset -#endif - -#endif diff --git a/include/asm-ppc/btext.h b/include/asm-ppc/btext.h deleted file mode 100644 index ed3630251b3b..000000000000 --- a/include/asm-ppc/btext.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Definitions for using the procedures in btext.c. - * - * Benjamin Herrenschmidt <benh@kernel.crashing.org> - */ -#ifndef __PPC_BTEXT_H -#define __PPC_BTEXT_H -#ifdef __KERNEL__ - -#include <asm/bootx.h> - -extern void btext_clearscreen(void); -extern void btext_flushscreen(void); - -extern unsigned long disp_BAT[2]; - -extern boot_infos_t disp_bi; -extern int boot_text_mapped; - -extern void btext_init(boot_infos_t *bi); -extern void btext_welcome(void); -extern void btext_prepare_BAT(void); -extern void btext_setup_display(int width, int height, int depth, int pitch, - unsigned long address); -extern void map_boot_text(void); -extern void btext_update_display(unsigned long phys, int width, int height, - int depth, int pitch); - -extern void btext_drawchar(char c); -extern void btext_drawstring(const char *str); -extern void btext_drawhex(unsigned long v); - -#endif /* __KERNEL__ */ -#endif /* __PPC_BTEXT_H */ diff --git a/include/asm-ppc/cpm1.h b/include/asm-ppc/cpm1.h deleted file mode 100644 index 03035acd85c6..000000000000 --- a/include/asm-ppc/cpm1.h +++ /dev/null @@ -1,688 +0,0 @@ -/* - * MPC8xx Communication Processor Module. - * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) - * - * This file contains structures and information for the communication - * processor channels. Some CPM control and status is available - * throught the MPC8xx internal memory map. See immap.h for details. - * This file only contains what I need for the moment, not the total - * CPM capabilities. I (or someone else) will add definitions as they - * are needed. -- Dan - * - * On the MBX board, EPPC-Bug loads CPM microcode into the first 512 - * bytes of the DP RAM and relocates the I2C parameter area to the - * IDMA1 space. The remaining DP RAM is available for buffer descriptors - * or other use. - */ -#ifndef __CPM1__ -#define __CPM1__ - -#include <asm/8xx_immap.h> -#include <asm/ptrace.h> - -/* CPM Command register. -*/ -#define CPM_CR_RST ((ushort)0x8000) -#define CPM_CR_OPCODE ((ushort)0x0f00) -#define CPM_CR_CHAN ((ushort)0x00f0) -#define CPM_CR_FLG ((ushort)0x0001) - -/* Some commands (there are more...later) -*/ -#define CPM_CR_INIT_TRX ((ushort)0x0000) -#define CPM_CR_INIT_RX ((ushort)0x0001) -#define CPM_CR_INIT_TX ((ushort)0x0002) -#define CPM_CR_HUNT_MODE ((ushort)0x0003) -#define CPM_CR_STOP_TX ((ushort)0x0004) -#define CPM_CR_GRA_STOP_TX ((ushort)0x0005) -#define CPM_CR_RESTART_TX ((ushort)0x0006) -#define CPM_CR_CLOSE_RX_BD ((ushort)0x0007) -#define CPM_CR_SET_GADDR ((ushort)0x0008) -#define CPM_CR_SET_TIMER CPM_CR_SET_GADDR - -/* Channel numbers. -*/ -#define CPM_CR_CH_SCC1 ((ushort)0x0000) -#define CPM_CR_CH_I2C ((ushort)0x0001) /* I2C and IDMA1 */ -#define CPM_CR_CH_SCC2 ((ushort)0x0004) -#define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / IDMA2 / Timers */ -#define CPM_CR_CH_TIMER CPM_CR_CH_SPI -#define CPM_CR_CH_SCC3 ((ushort)0x0008) -#define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / DSP1 */ -#define CPM_CR_CH_SCC4 ((ushort)0x000c) -#define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / DSP2 */ - -#define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4)) - -/* The dual ported RAM is multi-functional. Some areas can be (and are - * being) used for microcode. There is an area that can only be used - * as data ram for buffer descriptors, which is all we use right now. - * Currently the first 512 and last 256 bytes are used for microcode. - */ -#define CPM_DATAONLY_BASE ((uint)0x0800) -#define CPM_DATAONLY_SIZE ((uint)0x0700) -#define CPM_DP_NOSPACE ((uint)0x7fffffff) - -/* Export the base address of the communication processor registers - * and dual port ram. - */ -extern cpm8xx_t *cpmp; /* Pointer to comm processor */ -extern unsigned long cpm_dpalloc(uint size, uint align); -extern int cpm_dpfree(unsigned long offset); -extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align); -extern void cpm_dpdump(void); -extern void *cpm_dpram_addr(unsigned long offset); -extern uint cpm_dpram_phys(u8 *addr); -extern void cpm_setbrg(uint brg, uint rate); - -extern void cpm_load_patch(volatile immap_t *immr); - -/* Buffer descriptors used by many of the CPM protocols. -*/ -typedef struct cpm_buf_desc { - ushort cbd_sc; /* Status and Control */ - ushort cbd_datlen; /* Data length in buffer */ - uint cbd_bufaddr; /* Buffer address in host memory */ -} cbd_t; - -#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */ -#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */ -#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */ -#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */ -#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */ -#define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */ -#define BD_SC_CM ((ushort)0x0200) /* Continous mode */ -#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */ -#define BD_SC_P ((ushort)0x0100) /* xmt preamble */ -#define BD_SC_BR ((ushort)0x0020) /* Break received */ -#define BD_SC_FR ((ushort)0x0010) /* Framing error */ -#define BD_SC_PR ((ushort)0x0008) /* Parity error */ -#define BD_SC_NAK ((ushort)0x0004) /* NAK - did not respond */ -#define BD_SC_OV ((ushort)0x0002) /* Overrun */ -#define BD_SC_UN ((ushort)0x0002) /* Underrun */ -#define BD_SC_CD ((ushort)0x0001) /* ?? */ -#define BD_SC_CL ((ushort)0x0001) /* Collision */ - -/* Parameter RAM offsets. -*/ -#define PROFF_SCC1 ((uint)0x0000) -#define PROFF_IIC ((uint)0x0080) -#define PROFF_SCC2 ((uint)0x0100) -#define PROFF_SPI ((uint)0x0180) -#define PROFF_SCC3 ((uint)0x0200) -#define PROFF_SMC1 ((uint)0x0280) -#define PROFF_SCC4 ((uint)0x0300) -#define PROFF_SMC2 ((uint)0x0380) - -/* Define enough so I can at least use the serial port as a UART. - * The MBX uses SMC1 as the host serial port. - */ -typedef struct smc_uart { - ushort smc_rbase; /* Rx Buffer descriptor base address */ - ushort smc_tbase; /* Tx Buffer descriptor base address */ - u_char smc_rfcr; /* Rx function code */ - u_char smc_tfcr; /* Tx function code */ - ushort smc_mrblr; /* Max receive buffer length */ - uint smc_rstate; /* Internal */ - uint smc_idp; /* Internal */ - ushort smc_rbptr; /* Internal */ - ushort smc_ibc; /* Internal */ - uint smc_rxtmp; /* Internal */ - uint smc_tstate; /* Internal */ - uint smc_tdp; /* Internal */ - ushort smc_tbptr; /* Internal */ - ushort smc_tbc; /* Internal */ - uint smc_txtmp; /* Internal */ - ushort smc_maxidl; /* Maximum idle characters */ - ushort smc_tmpidl; /* Temporary idle counter */ - ushort smc_brklen; /* Last received break length */ - ushort smc_brkec; /* rcv'd break condition counter */ - ushort smc_brkcr; /* xmt break count register */ - ushort smc_rmask; /* Temporary bit mask */ - char res1[8]; /* Reserved */ - ushort smc_rpbase; /* Relocation pointer */ -} smc_uart_t; - -/* Function code bits. -*/ -#define SMC_EB ((u_char)0x10) /* Set big endian byte order */ - -/* SMC uart mode register. -*/ -#define SMCMR_REN ((ushort)0x0001) -#define SMCMR_TEN ((ushort)0x0002) -#define SMCMR_DM ((ushort)0x000c) -#define SMCMR_SM_GCI ((ushort)0x0000) -#define SMCMR_SM_UART ((ushort)0x0020) -#define SMCMR_SM_TRANS ((ushort)0x0030) -#define SMCMR_SM_MASK ((ushort)0x0030) -#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ -#define SMCMR_REVD SMCMR_PM_EVEN -#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ -#define SMCMR_BS SMCMR_PEN -#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ -#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ -#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) - -/* SMC2 as Centronics parallel printer. It is half duplex, in that - * it can only receive or transmit. The parameter ram values for - * each direction are either unique or properly overlap, so we can - * include them in one structure. - */ -typedef struct smc_centronics { - ushort scent_rbase; - ushort scent_tbase; - u_char scent_cfcr; - u_char scent_smask; - ushort scent_mrblr; - uint scent_rstate; - uint scent_r_ptr; - ushort scent_rbptr; - ushort scent_r_cnt; - uint scent_rtemp; - uint scent_tstate; - uint scent_t_ptr; - ushort scent_tbptr; - ushort scent_t_cnt; - uint scent_ttemp; - ushort scent_max_sl; - ushort scent_sl_cnt; - ushort scent_character1; - ushort scent_character2; - ushort scent_character3; - ushort scent_character4; - ushort scent_character5; - ushort scent_character6; - ushort scent_character7; - ushort scent_character8; - ushort scent_rccm; - ushort scent_rccr; -} smc_cent_t; - -/* Centronics Status Mask Register. -*/ -#define SMC_CENT_F ((u_char)0x08) -#define SMC_CENT_PE ((u_char)0x04) -#define SMC_CENT_S ((u_char)0x02) - -/* SMC Event and Mask register. -*/ -#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */ -#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */ -#define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */ -#define SMCM_BSY ((unsigned char)0x04) -#define SMCM_TX ((unsigned char)0x02) -#define SMCM_RX ((unsigned char)0x01) - -/* Baud rate generators. -*/ -#define CPM_BRG_RST ((uint)0x00020000) -#define CPM_BRG_EN ((uint)0x00010000) -#define CPM_BRG_EXTC_INT ((uint)0x00000000) -#define CPM_BRG_EXTC_CLK2 ((uint)0x00004000) -#define CPM_BRG_EXTC_CLK6 ((uint)0x00008000) -#define CPM_BRG_ATB ((uint)0x00002000) -#define CPM_BRG_CD_MASK ((uint)0x00001ffe) -#define CPM_BRG_DIV16 ((uint)0x00000001) - -/* SI Clock Route Register -*/ -#define SICR_RCLK_SCC1_BRG1 ((uint)0x00000000) -#define SICR_TCLK_SCC1_BRG1 ((uint)0x00000000) -#define SICR_RCLK_SCC2_BRG2 ((uint)0x00000800) -#define SICR_TCLK_SCC2_BRG2 ((uint)0x00000100) -#define SICR_RCLK_SCC3_BRG3 ((uint)0x00100000) -#define SICR_TCLK_SCC3_BRG3 ((uint)0x00020000) -#define SICR_RCLK_SCC4_BRG4 ((uint)0x18000000) -#define SICR_TCLK_SCC4_BRG4 ((uint)0x03000000) - -/* SCCs. -*/ -#define SCC_GSMRH_IRP ((uint)0x00040000) -#define SCC_GSMRH_GDE ((uint)0x00010000) -#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) -#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) -#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) -#define SCC_GSMRH_REVD ((uint)0x00002000) -#define SCC_GSMRH_TRX ((uint)0x00001000) -#define SCC_GSMRH_TTX ((uint)0x00000800) -#define SCC_GSMRH_CDP ((uint)0x00000400) -#define SCC_GSMRH_CTSP ((uint)0x00000200) -#define SCC_GSMRH_CDS ((uint)0x00000100) -#define SCC_GSMRH_CTSS ((uint)0x00000080) -#define SCC_GSMRH_TFL ((uint)0x00000040) -#define SCC_GSMRH_RFW ((uint)0x00000020) -#define SCC_GSMRH_TXSY ((uint)0x00000010) -#define SCC_GSMRH_SYNL16 ((uint)0x0000000c) -#define SCC_GSMRH_SYNL8 ((uint)0x00000008) -#define SCC_GSMRH_SYNL4 ((uint)0x00000004) -#define SCC_GSMRH_RTSM ((uint)0x00000002) -#define SCC_GSMRH_RSYN ((uint)0x00000001) - -#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ -#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) -#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) -#define SCC_GSMRL_EDGE_POS ((uint)0x20000000) -#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) -#define SCC_GSMRL_TCI ((uint)0x10000000) -#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) -#define SCC_GSMRL_TSNC_4 ((uint)0x08000000) -#define SCC_GSMRL_TSNC_14 ((uint)0x04000000) -#define SCC_GSMRL_TSNC_INF ((uint)0x00000000) -#define SCC_GSMRL_RINV ((uint)0x02000000) -#define SCC_GSMRL_TINV ((uint)0x01000000) -#define SCC_GSMRL_TPL_128 ((uint)0x00c00000) -#define SCC_GSMRL_TPL_64 ((uint)0x00a00000) -#define SCC_GSMRL_TPL_48 ((uint)0x00800000) -#define SCC_GSMRL_TPL_32 ((uint)0x00600000) -#define SCC_GSMRL_TPL_16 ((uint)0x00400000) -#define SCC_GSMRL_TPL_8 ((uint)0x00200000) -#define SCC_GSMRL_TPL_NONE ((uint)0x00000000) -#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) -#define SCC_GSMRL_TPP_01 ((uint)0x00100000) -#define SCC_GSMRL_TPP_10 ((uint)0x00080000) -#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) -#define SCC_GSMRL_TEND ((uint)0x00040000) -#define SCC_GSMRL_TDCR_32 ((uint)0x00030000) -#define SCC_GSMRL_TDCR_16 ((uint)0x00020000) -#define SCC_GSMRL_TDCR_8 ((uint)0x00010000) -#define SCC_GSMRL_TDCR_1 ((uint)0x00000000) -#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) -#define SCC_GSMRL_RDCR_16 ((uint)0x00008000) -#define SCC_GSMRL_RDCR_8 ((uint)0x00004000) -#define SCC_GSMRL_RDCR_1 ((uint)0x00000000) -#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) -#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) -#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) -#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) -#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) -#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) -#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) -#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) -#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) -#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) -#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ -#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) -#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) -#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) -#define SCC_GSMRL_ENR ((uint)0x00000020) -#define SCC_GSMRL_ENT ((uint)0x00000010) -#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) -#define SCC_GSMRL_MODE_QMC ((uint)0x0000000a) -#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) -#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) -#define SCC_GSMRL_MODE_V14 ((uint)0x00000007) -#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) -#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) -#define SCC_GSMRL_MODE_UART ((uint)0x00000004) -#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) -#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) -#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) - -#define SCC_TODR_TOD ((ushort)0x8000) - -/* SCC Event and Mask register. -*/ -#define SCCM_TXE ((unsigned char)0x10) -#define SCCM_BSY ((unsigned char)0x04) -#define SCCM_TX ((unsigned char)0x02) -#define SCCM_RX ((unsigned char)0x01) - -typedef struct scc_param { - ushort scc_rbase; /* Rx Buffer descriptor base address */ - ushort scc_tbase; /* Tx Buffer descriptor base address */ - u_char scc_rfcr; /* Rx function code */ - u_char scc_tfcr; /* Tx function code */ - ushort scc_mrblr; /* Max receive buffer length */ - uint scc_rstate; /* Internal */ - uint scc_idp; /* Internal */ - ushort scc_rbptr; /* Internal */ - ushort scc_ibc; /* Internal */ - uint scc_rxtmp; /* Internal */ - uint scc_tstate; /* Internal */ - uint scc_tdp; /* Internal */ - ushort scc_tbptr; /* Internal */ - ushort scc_tbc; /* Internal */ - uint scc_txtmp; /* Internal */ - uint scc_rcrc; /* Internal */ - uint scc_tcrc; /* Internal */ -} sccp_t; - -/* Function code bits. -*/ -#define SCC_EB ((u_char)0x10) /* Set big endian byte order */ - -/* CPM Ethernet through SCCx. - */ -typedef struct scc_enet { - sccp_t sen_genscc; - uint sen_cpres; /* Preset CRC */ - uint sen_cmask; /* Constant mask for CRC */ - uint sen_crcec; /* CRC Error counter */ - uint sen_alec; /* alignment error counter */ - uint sen_disfc; /* discard frame counter */ - ushort sen_pads; /* Tx short frame pad character */ - ushort sen_retlim; /* Retry limit threshold */ - ushort sen_retcnt; /* Retry limit counter */ - ushort sen_maxflr; /* maximum frame length register */ - ushort sen_minflr; /* minimum frame length register */ - ushort sen_maxd1; /* maximum DMA1 length */ - ushort sen_maxd2; /* maximum DMA2 length */ - ushort sen_maxd; /* Rx max DMA */ - ushort sen_dmacnt; /* Rx DMA counter */ - ushort sen_maxb; /* Max BD byte count */ - ushort sen_gaddr1; /* Group address filter */ - ushort sen_gaddr2; - ushort sen_gaddr3; - ushort sen_gaddr4; - uint sen_tbuf0data0; /* Save area 0 - current frame */ - uint sen_tbuf0data1; /* Save area 1 - current frame */ - uint sen_tbuf0rba; /* Internal */ - uint sen_tbuf0crc; /* Internal */ - ushort sen_tbuf0bcnt; /* Internal */ - ushort sen_paddrh; /* physical address (MSB) */ - ushort sen_paddrm; - ushort sen_paddrl; /* physical address (LSB) */ - ushort sen_pper; /* persistence */ - ushort sen_rfbdptr; /* Rx first BD pointer */ - ushort sen_tfbdptr; /* Tx first BD pointer */ - ushort sen_tlbdptr; /* Tx last BD pointer */ - uint sen_tbuf1data0; /* Save area 0 - current frame */ - uint sen_tbuf1data1; /* Save area 1 - current frame */ - uint sen_tbuf1rba; /* Internal */ - uint sen_tbuf1crc; /* Internal */ - ushort sen_tbuf1bcnt; /* Internal */ - ushort sen_txlen; /* Tx Frame length counter */ - ushort sen_iaddr1; /* Individual address filter */ - ushort sen_iaddr2; - ushort sen_iaddr3; - ushort sen_iaddr4; - ushort sen_boffcnt; /* Backoff counter */ - - /* NOTE: Some versions of the manual have the following items - * incorrectly documented. Below is the proper order. - */ - ushort sen_taddrh; /* temp address (MSB) */ - ushort sen_taddrm; - ushort sen_taddrl; /* temp address (LSB) */ -} scc_enet_t; - -/* SCC Event register as used by Ethernet. -*/ -#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ -#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ -#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ -#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ -#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ -#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ - -/* SCC Mode Register (PMSR) as used by Ethernet. -*/ -#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */ -#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */ -#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */ -#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */ -#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ -#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */ -#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ -#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */ -#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */ -#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */ -#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */ -#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */ -#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */ - -/* Buffer descriptor control/status used by Ethernet receive. -*/ -#define BD_ENET_RX_EMPTY ((ushort)0x8000) -#define BD_ENET_RX_WRAP ((ushort)0x2000) -#define BD_ENET_RX_INTR ((ushort)0x1000) -#define BD_ENET_RX_LAST ((ushort)0x0800) -#define BD_ENET_RX_FIRST ((ushort)0x0400) -#define BD_ENET_RX_MISS ((ushort)0x0100) -#define BD_ENET_RX_LG ((ushort)0x0020) -#define BD_ENET_RX_NO ((ushort)0x0010) -#define BD_ENET_RX_SH ((ushort)0x0008) -#define BD_ENET_RX_CR ((ushort)0x0004) -#define BD_ENET_RX_OV ((ushort)0x0002) -#define BD_ENET_RX_CL ((ushort)0x0001) -#define BD_ENET_RX_BC ((ushort)0x0080) /* DA is Broadcast */ -#define BD_ENET_RX_MC ((ushort)0x0040) /* DA is Multicast */ -#define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */ - -/* Buffer descriptor control/status used by Ethernet transmit. -*/ -#define BD_ENET_TX_READY ((ushort)0x8000) -#define BD_ENET_TX_PAD ((ushort)0x4000) -#define BD_ENET_TX_WRAP ((ushort)0x2000) -#define BD_ENET_TX_INTR ((ushort)0x1000) -#define BD_ENET_TX_LAST ((ushort)0x0800) -#define BD_ENET_TX_TC ((ushort)0x0400) -#define BD_ENET_TX_DEF ((ushort)0x0200) -#define BD_ENET_TX_HB ((ushort)0x0100) -#define BD_ENET_TX_LC ((ushort)0x0080) -#define BD_ENET_TX_RL ((ushort)0x0040) -#define BD_ENET_TX_RCMASK ((ushort)0x003c) -#define BD_ENET_TX_UN ((ushort)0x0002) -#define BD_ENET_TX_CSL ((ushort)0x0001) -#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */ - -/* SCC as UART -*/ -typedef struct scc_uart { - sccp_t scc_genscc; - char res1[8]; /* Reserved */ - ushort scc_maxidl; /* Maximum idle chars */ - ushort scc_idlc; /* temp idle counter */ - ushort scc_brkcr; /* Break count register */ - ushort scc_parec; /* receive parity error counter */ - ushort scc_frmec; /* receive framing error counter */ - ushort scc_nosec; /* receive noise counter */ - ushort scc_brkec; /* receive break condition counter */ - ushort scc_brkln; /* last received break length */ - ushort scc_uaddr1; /* UART address character 1 */ - ushort scc_uaddr2; /* UART address character 2 */ - ushort scc_rtemp; /* Temp storage */ - ushort scc_toseq; /* Transmit out of sequence char */ - ushort scc_char1; /* control character 1 */ - ushort scc_char2; /* control character 2 */ - ushort scc_char3; /* control character 3 */ - ushort scc_char4; /* control character 4 */ - ushort scc_char5; /* control character 5 */ - ushort scc_char6; /* control character 6 */ - ushort scc_char7; /* control character 7 */ - ushort scc_char8; /* control character 8 */ - ushort scc_rccm; /* receive control character mask */ - ushort scc_rccr; /* receive control character register */ - ushort scc_rlbc; /* receive last break character */ -} scc_uart_t; - -/* SCC Event and Mask registers when it is used as a UART. -*/ -#define UART_SCCM_GLR ((ushort)0x1000) -#define UART_SCCM_GLT ((ushort)0x0800) -#define UART_SCCM_AB ((ushort)0x0200) -#define UART_SCCM_IDL ((ushort)0x0100) -#define UART_SCCM_GRA ((ushort)0x0080) -#define UART_SCCM_BRKE ((ushort)0x0040) -#define UART_SCCM_BRKS ((ushort)0x0020) -#define UART_SCCM_CCR ((ushort)0x0008) -#define UART_SCCM_BSY ((ushort)0x0004) -#define UART_SCCM_TX ((ushort)0x0002) -#define UART_SCCM_RX ((ushort)0x0001) - -/* The SCC PMSR when used as a UART. -*/ -#define SCU_PSMR_FLC ((ushort)0x8000) -#define SCU_PSMR_SL ((ushort)0x4000) -#define SCU_PSMR_CL ((ushort)0x3000) -#define SCU_PSMR_UM ((ushort)0x0c00) -#define SCU_PSMR_FRZ ((ushort)0x0200) -#define SCU_PSMR_RZS ((ushort)0x0100) -#define SCU_PSMR_SYN ((ushort)0x0080) -#define SCU_PSMR_DRT ((ushort)0x0040) -#define SCU_PSMR_PEN ((ushort)0x0010) -#define SCU_PSMR_RPM ((ushort)0x000c) -#define SCU_PSMR_REVP ((ushort)0x0008) -#define SCU_PSMR_TPM ((ushort)0x0003) -#define SCU_PSMR_TEVP ((ushort)0x0002) - -/* CPM Transparent mode SCC. - */ -typedef struct scc_trans { - sccp_t st_genscc; - uint st_cpres; /* Preset CRC */ - uint st_cmask; /* Constant mask for CRC */ -} scc_trans_t; - -#define BD_SCC_TX_LAST ((ushort)0x0800) - -/* IIC parameter RAM. -*/ -typedef struct iic { - ushort iic_rbase; /* Rx Buffer descriptor base address */ - ushort iic_tbase; /* Tx Buffer descriptor base address */ - u_char iic_rfcr; /* Rx function code */ - u_char iic_tfcr; /* Tx function code */ - ushort iic_mrblr; /* Max receive buffer length */ - uint iic_rstate; /* Internal */ - uint iic_rdp; /* Internal */ - ushort iic_rbptr; /* Internal */ - ushort iic_rbc; /* Internal */ - uint iic_rxtmp; /* Internal */ - uint iic_tstate; /* Internal */ - uint iic_tdp; /* Internal */ - ushort iic_tbptr; /* Internal */ - ushort iic_tbc; /* Internal */ - uint iic_txtmp; /* Internal */ - char res1[4]; /* Reserved */ - ushort iic_rpbase; /* Relocation pointer */ - char res2[2]; /* Reserved */ -} iic_t; - -#define BD_IIC_START ((ushort)0x0400) - -/* SPI parameter RAM. -*/ -typedef struct spi { - ushort spi_rbase; /* Rx Buffer descriptor base address */ - ushort spi_tbase; /* Tx Buffer descriptor base address */ - u_char spi_rfcr; /* Rx function code */ - u_char spi_tfcr; /* Tx function code */ - ushort spi_mrblr; /* Max receive buffer length */ - uint spi_rstate; /* Internal */ - uint spi_rdp; /* Internal */ - ushort spi_rbptr; /* Internal */ - ushort spi_rbc; /* Internal */ - uint spi_rxtmp; /* Internal */ - uint spi_tstate; /* Internal */ - uint spi_tdp; /* Internal */ - ushort spi_tbptr; /* Internal */ - ushort spi_tbc; /* Internal */ - uint spi_txtmp; /* Internal */ - uint spi_res; - ushort spi_rpbase; /* Relocation pointer */ - ushort spi_res2; -} spi_t; - -/* SPI Mode register. -*/ -#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */ -#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */ -#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */ -#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */ -#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */ -#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */ -#define SPMODE_EN ((ushort)0x0100) /* Enable */ -#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */ -#define SPMODE_LEN4 ((ushort)0x0030) /* 4 bits per char */ -#define SPMODE_LEN8 ((ushort)0x0070) /* 8 bits per char */ -#define SPMODE_LEN16 ((ushort)0x00f0) /* 16 bits per char */ -#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */ - -/* SPIE fields */ -#define SPIE_MME 0x20 -#define SPIE_TXE 0x10 -#define SPIE_BSY 0x04 -#define SPIE_TXB 0x02 -#define SPIE_RXB 0x01 - -/* - * RISC Controller Configuration Register definitons - */ -#define RCCR_TIME 0x8000 /* RISC Timer Enable */ -#define RCCR_TIMEP(t) (((t) & 0x3F)<<8) /* RISC Timer Period */ -#define RCCR_TIME_MASK 0x00FF /* not RISC Timer related bits */ - -/* RISC Timer Parameter RAM offset */ -#define PROFF_RTMR ((uint)0x01B0) - -typedef struct risc_timer_pram { - unsigned short tm_base; /* RISC Timer Table Base Address */ - unsigned short tm_ptr; /* RISC Timer Table Pointer (internal) */ - unsigned short r_tmr; /* RISC Timer Mode Register */ - unsigned short r_tmv; /* RISC Timer Valid Register */ - unsigned long tm_cmd; /* RISC Timer Command Register */ - unsigned long tm_cnt; /* RISC Timer Internal Count */ -} rt_pram_t; - -/* Bits in RISC Timer Command Register */ -#define TM_CMD_VALID 0x80000000 /* Valid - Enables the timer */ -#define TM_CMD_RESTART 0x40000000 /* Restart - for automatic restart */ -#define TM_CMD_PWM 0x20000000 /* Run in Pulse Width Modulation Mode */ -#define TM_CMD_NUM(n) (((n)&0xF)<<16) /* Timer Number */ -#define TM_CMD_PERIOD(p) ((p)&0xFFFF) /* Timer Period */ - -/* CPM interrupts. There are nearly 32 interrupts generated by CPM - * channels or devices. All of these are presented to the PPC core - * as a single interrupt. The CPM interrupt handler dispatches its - * own handlers, in a similar fashion to the PPC core handler. We - * use the table as defined in the manuals (i.e. no special high - * priority and SCC1 == SCCa, etc...). - */ -#define CPMVEC_NR 32 -#define CPMVEC_PIO_PC15 ((ushort)0x1f) -#define CPMVEC_SCC1 ((ushort)0x1e) -#define CPMVEC_SCC2 ((ushort)0x1d) -#define CPMVEC_SCC3 ((ushort)0x1c) -#define CPMVEC_SCC4 ((ushort)0x1b) -#define CPMVEC_PIO_PC14 ((ushort)0x1a) -#define CPMVEC_TIMER1 ((ushort)0x19) -#define CPMVEC_PIO_PC13 ((ushort)0x18) -#define CPMVEC_PIO_PC12 ((ushort)0x17) -#define CPMVEC_SDMA_CB_ERR ((ushort)0x16) -#define CPMVEC_IDMA1 ((ushort)0x15) -#define CPMVEC_IDMA2 ((ushort)0x14) -#define CPMVEC_TIMER2 ((ushort)0x12) -#define CPMVEC_RISCTIMER ((ushort)0x11) -#define CPMVEC_I2C ((ushort)0x10) -#define CPMVEC_PIO_PC11 ((ushort)0x0f) -#define CPMVEC_PIO_PC10 ((ushort)0x0e) -#define CPMVEC_TIMER3 ((ushort)0x0c) -#define CPMVEC_PIO_PC9 ((ushort)0x0b) -#define CPMVEC_PIO_PC8 ((ushort)0x0a) -#define CPMVEC_PIO_PC7 ((ushort)0x09) -#define CPMVEC_TIMER4 ((ushort)0x07) -#define CPMVEC_PIO_PC6 ((ushort)0x06) -#define CPMVEC_SPI ((ushort)0x05) -#define CPMVEC_SMC1 ((ushort)0x04) -#define CPMVEC_SMC2 ((ushort)0x03) -#define CPMVEC_PIO_PC5 ((ushort)0x02) -#define CPMVEC_PIO_PC4 ((ushort)0x01) -#define CPMVEC_ERROR ((ushort)0x00) - -/* CPM interrupt configuration vector. -*/ -#define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */ -#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */ -#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */ -#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */ -#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */ -#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */ -#define CICR_IEN ((uint)0x00000080) /* Int. enable */ -#define CICR_SPS ((uint)0x00000001) /* SCC Spread */ - -extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id); -extern void cpm_free_handler(int vec); - -#endif /* __CPM1__ */ diff --git a/include/asm-ppc/cpm2.h b/include/asm-ppc/cpm2.h deleted file mode 100644 index 4c538228e42f..000000000000 --- a/include/asm-ppc/cpm2.h +++ /dev/null @@ -1,1248 +0,0 @@ -/* - * Communication Processor Module v2. - * - * This file contains structures and information for the communication - * processor channels found in the dual port RAM or parameter RAM. - * All CPM control and status is available through the CPM2 internal - * memory map. See immap_cpm2.h for details. - */ -#ifdef __KERNEL__ -#ifndef __CPM2__ -#define __CPM2__ - -#include <asm/immap_cpm2.h> - -/* CPM Command register. -*/ -#define CPM_CR_RST ((uint)0x80000000) -#define CPM_CR_PAGE ((uint)0x7c000000) -#define CPM_CR_SBLOCK ((uint)0x03e00000) -#define CPM_CR_FLG ((uint)0x00010000) -#define CPM_CR_MCN ((uint)0x00003fc0) -#define CPM_CR_OPCODE ((uint)0x0000000f) - -/* Device sub-block and page codes. -*/ -#define CPM_CR_SCC1_SBLOCK (0x04) -#define CPM_CR_SCC2_SBLOCK (0x05) -#define CPM_CR_SCC3_SBLOCK (0x06) -#define CPM_CR_SCC4_SBLOCK (0x07) -#define CPM_CR_SMC1_SBLOCK (0x08) -#define CPM_CR_SMC2_SBLOCK (0x09) -#define CPM_CR_SPI_SBLOCK (0x0a) -#define CPM_CR_I2C_SBLOCK (0x0b) -#define CPM_CR_TIMER_SBLOCK (0x0f) -#define CPM_CR_RAND_SBLOCK (0x0e) -#define CPM_CR_FCC1_SBLOCK (0x10) -#define CPM_CR_FCC2_SBLOCK (0x11) -#define CPM_CR_FCC3_SBLOCK (0x12) -#define CPM_CR_IDMA1_SBLOCK (0x14) -#define CPM_CR_IDMA2_SBLOCK (0x15) -#define CPM_CR_IDMA3_SBLOCK (0x16) -#define CPM_CR_IDMA4_SBLOCK (0x17) -#define CPM_CR_MCC1_SBLOCK (0x1c) - -#define CPM_CR_FCC_SBLOCK(x) (x + 0x10) - -#define CPM_CR_SCC1_PAGE (0x00) -#define CPM_CR_SCC2_PAGE (0x01) -#define CPM_CR_SCC3_PAGE (0x02) -#define CPM_CR_SCC4_PAGE (0x03) -#define CPM_CR_SMC1_PAGE (0x07) -#define CPM_CR_SMC2_PAGE (0x08) -#define CPM_CR_SPI_PAGE (0x09) -#define CPM_CR_I2C_PAGE (0x0a) -#define CPM_CR_TIMER_PAGE (0x0a) -#define CPM_CR_RAND_PAGE (0x0a) -#define CPM_CR_FCC1_PAGE (0x04) -#define CPM_CR_FCC2_PAGE (0x05) -#define CPM_CR_FCC3_PAGE (0x06) -#define CPM_CR_IDMA1_PAGE (0x07) -#define CPM_CR_IDMA2_PAGE (0x08) -#define CPM_CR_IDMA3_PAGE (0x09) -#define CPM_CR_IDMA4_PAGE (0x0a) -#define CPM_CR_MCC1_PAGE (0x07) -#define CPM_CR_MCC2_PAGE (0x08) - -#define CPM_CR_FCC_PAGE(x) (x + 0x04) - -/* Some opcodes (there are more...later) -*/ -#define CPM_CR_INIT_TRX ((ushort)0x0000) -#define CPM_CR_INIT_RX ((ushort)0x0001) -#define CPM_CR_INIT_TX ((ushort)0x0002) -#define CPM_CR_HUNT_MODE ((ushort)0x0003) -#define CPM_CR_STOP_TX ((ushort)0x0004) -#define CPM_CR_GRA_STOP_TX ((ushort)0x0005) -#define CPM_CR_RESTART_TX ((ushort)0x0006) -#define CPM_CR_SET_GADDR ((ushort)0x0008) -#define CPM_CR_START_IDMA ((ushort)0x0009) -#define CPM_CR_STOP_IDMA ((ushort)0x000b) - -#define mk_cr_cmd(PG, SBC, MCN, OP) \ - ((PG << 26) | (SBC << 21) | (MCN << 6) | OP) - -/* Dual Port RAM addresses. The first 16K is available for almost - * any CPM use, so we put the BDs there. The first 128 bytes are - * used for SMC1 and SMC2 parameter RAM, so we start allocating - * BDs above that. All of this must change when we start - * downloading RAM microcode. - */ -#define CPM_DATAONLY_BASE ((uint)128) -#define CPM_DP_NOSPACE ((uint)0x7fffffff) -#if defined(CONFIG_8272) -#define CPM_DATAONLY_SIZE ((uint)(8 * 1024) - CPM_DATAONLY_BASE) -#define CPM_FCC_SPECIAL_BASE ((uint)0x00009000) -#else -#define CPM_DATAONLY_SIZE ((uint)(16 * 1024) - CPM_DATAONLY_BASE) -#define CPM_FCC_SPECIAL_BASE ((uint)0x0000b000) -#endif - -/* The number of pages of host memory we allocate for CPM. This is - * done early in kernel initialization to get physically contiguous - * pages. - */ -#define NUM_CPM_HOST_PAGES 2 - -/* Export the base address of the communication processor registers - * and dual port ram. - */ -extern cpm_cpm2_t *cpmp; /* Pointer to comm processor */ - -extern unsigned long cpm_dpalloc(uint size, uint align); -extern int cpm_dpfree(unsigned long offset); -extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align); -extern void cpm_dpdump(void); -extern void *cpm_dpram_addr(unsigned long offset); -extern void cpm_setbrg(uint brg, uint rate); -extern void cpm2_fastbrg(uint brg, uint rate, int div16); -extern void cpm2_reset(void); - - -/* Buffer descriptors used by many of the CPM protocols. -*/ -typedef struct cpm_buf_desc { - ushort cbd_sc; /* Status and Control */ - ushort cbd_datlen; /* Data length in buffer */ - uint cbd_bufaddr; /* Buffer address in host memory */ -} cbd_t; - -#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */ -#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */ -#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */ -#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */ -#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */ -#define BD_SC_CM ((ushort)0x0200) /* Continous mode */ -#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */ -#define BD_SC_P ((ushort)0x0100) /* xmt preamble */ -#define BD_SC_BR ((ushort)0x0020) /* Break received */ -#define BD_SC_FR ((ushort)0x0010) /* Framing error */ -#define BD_SC_PR ((ushort)0x0008) /* Parity error */ -#define BD_SC_OV ((ushort)0x0002) /* Overrun */ -#define BD_SC_CD ((ushort)0x0001) /* ?? */ - -/* Function code bits, usually generic to devices. -*/ -#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */ -#define CPMFCR_EB ((u_char)0x10) /* Set big endian byte order */ -#define CPMFCR_TC2 ((u_char)0x04) /* Transfer code 2 value */ -#define CPMFCR_DTB ((u_char)0x02) /* Use local bus for data when set */ -#define CPMFCR_BDB ((u_char)0x01) /* Use local bus for BD when set */ - -/* Parameter RAM offsets from the base. -*/ -#define PROFF_SCC1 ((uint)0x8000) -#define PROFF_SCC2 ((uint)0x8100) -#define PROFF_SCC3 ((uint)0x8200) -#define PROFF_SCC4 ((uint)0x8300) -#define PROFF_FCC1 ((uint)0x8400) -#define PROFF_FCC2 ((uint)0x8500) -#define PROFF_FCC3 ((uint)0x8600) -#define PROFF_MCC1 ((uint)0x8700) -#define PROFF_SMC1_BASE ((uint)0x87fc) -#define PROFF_IDMA1_BASE ((uint)0x87fe) -#define PROFF_MCC2 ((uint)0x8800) -#define PROFF_SMC2_BASE ((uint)0x88fc) -#define PROFF_IDMA2_BASE ((uint)0x88fe) -#define PROFF_SPI_BASE ((uint)0x89fc) -#define PROFF_IDMA3_BASE ((uint)0x89fe) -#define PROFF_TIMERS ((uint)0x8ae0) -#define PROFF_REVNUM ((uint)0x8af0) -#define PROFF_RAND ((uint)0x8af8) -#define PROFF_I2C_BASE ((uint)0x8afc) -#define PROFF_IDMA4_BASE ((uint)0x8afe) - -#define PROFF_SCC_SIZE ((uint)0x100) -#define PROFF_FCC_SIZE ((uint)0x100) -#define PROFF_SMC_SIZE ((uint)64) - -/* The SMCs are relocated to any of the first eight DPRAM pages. - * We will fix these at the first locations of DPRAM, until we - * get some microcode patches :-). - * The parameter ram space for the SMCs is fifty-some bytes, and - * they are required to start on a 64 byte boundary. - */ -#define PROFF_SMC1 (0) -#define PROFF_SMC2 (64) - - -/* Define enough so I can at least use the serial port as a UART. - */ -typedef struct smc_uart { - ushort smc_rbase; /* Rx Buffer descriptor base address */ - ushort smc_tbase; /* Tx Buffer descriptor base address */ - u_char smc_rfcr; /* Rx function code */ - u_char smc_tfcr; /* Tx function code */ - ushort smc_mrblr; /* Max receive buffer length */ - uint smc_rstate; /* Internal */ - uint smc_idp; /* Internal */ - ushort smc_rbptr; /* Internal */ - ushort smc_ibc; /* Internal */ - uint smc_rxtmp; /* Internal */ - uint smc_tstate; /* Internal */ - uint smc_tdp; /* Internal */ - ushort smc_tbptr; /* Internal */ - ushort smc_tbc; /* Internal */ - uint smc_txtmp; /* Internal */ - ushort smc_maxidl; /* Maximum idle characters */ - ushort smc_tmpidl; /* Temporary idle counter */ - ushort smc_brklen; /* Last received break length */ - ushort smc_brkec; /* rcv'd break condition counter */ - ushort smc_brkcr; /* xmt break count register */ - ushort smc_rmask; /* Temporary bit mask */ - uint smc_stmp; /* SDMA Temp */ -} smc_uart_t; - -/* SMC uart mode register (Internal memory map). -*/ -#define SMCMR_REN ((ushort)0x0001) -#define SMCMR_TEN ((ushort)0x0002) -#define SMCMR_DM ((ushort)0x000c) -#define SMCMR_SM_GCI ((ushort)0x0000) -#define SMCMR_SM_UART ((ushort)0x0020) -#define SMCMR_SM_TRANS ((ushort)0x0030) -#define SMCMR_SM_MASK ((ushort)0x0030) -#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ -#define SMCMR_REVD SMCMR_PM_EVEN -#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ -#define SMCMR_BS SMCMR_PEN -#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ -#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ -#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) - -/* SMC Event and Mask register. -*/ -#define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */ -#define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */ -#define SMCM_TXE ((unsigned char)0x10) -#define SMCM_BSY ((unsigned char)0x04) -#define SMCM_TX ((unsigned char)0x02) -#define SMCM_RX ((unsigned char)0x01) - -/* Baud rate generators. -*/ -#define CPM_BRG_RST ((uint)0x00020000) -#define CPM_BRG_EN ((uint)0x00010000) -#define CPM_BRG_EXTC_INT ((uint)0x00000000) -#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000) -#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000) -#define CPM_BRG_ATB ((uint)0x00002000) -#define CPM_BRG_CD_MASK ((uint)0x00001ffe) -#define CPM_BRG_DIV16 ((uint)0x00000001) - -/* SCCs. -*/ -#define SCC_GSMRH_IRP ((uint)0x00040000) -#define SCC_GSMRH_GDE ((uint)0x00010000) -#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) -#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) -#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) -#define SCC_GSMRH_REVD ((uint)0x00002000) -#define SCC_GSMRH_TRX ((uint)0x00001000) -#define SCC_GSMRH_TTX ((uint)0x00000800) -#define SCC_GSMRH_CDP ((uint)0x00000400) -#define SCC_GSMRH_CTSP ((uint)0x00000200) -#define SCC_GSMRH_CDS ((uint)0x00000100) -#define SCC_GSMRH_CTSS ((uint)0x00000080) -#define SCC_GSMRH_TFL ((uint)0x00000040) -#define SCC_GSMRH_RFW ((uint)0x00000020) -#define SCC_GSMRH_TXSY ((uint)0x00000010) -#define SCC_GSMRH_SYNL16 ((uint)0x0000000c) -#define SCC_GSMRH_SYNL8 ((uint)0x00000008) -#define SCC_GSMRH_SYNL4 ((uint)0x00000004) -#define SCC_GSMRH_RTSM ((uint)0x00000002) -#define SCC_GSMRH_RSYN ((uint)0x00000001) - -#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ -#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) -#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) -#define SCC_GSMRL_EDGE_POS ((uint)0x20000000) -#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) -#define SCC_GSMRL_TCI ((uint)0x10000000) -#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) -#define SCC_GSMRL_TSNC_4 ((uint)0x08000000) -#define SCC_GSMRL_TSNC_14 ((uint)0x04000000) -#define SCC_GSMRL_TSNC_INF ((uint)0x00000000) -#define SCC_GSMRL_RINV ((uint)0x02000000) -#define SCC_GSMRL_TINV ((uint)0x01000000) -#define SCC_GSMRL_TPL_128 ((uint)0x00c00000) -#define SCC_GSMRL_TPL_64 ((uint)0x00a00000) -#define SCC_GSMRL_TPL_48 ((uint)0x00800000) -#define SCC_GSMRL_TPL_32 ((uint)0x00600000) -#define SCC_GSMRL_TPL_16 ((uint)0x00400000) -#define SCC_GSMRL_TPL_8 ((uint)0x00200000) -#define SCC_GSMRL_TPL_NONE ((uint)0x00000000) -#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) -#define SCC_GSMRL_TPP_01 ((uint)0x00100000) -#define SCC_GSMRL_TPP_10 ((uint)0x00080000) -#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) -#define SCC_GSMRL_TEND ((uint)0x00040000) -#define SCC_GSMRL_TDCR_32 ((uint)0x00030000) -#define SCC_GSMRL_TDCR_16 ((uint)0x00020000) -#define SCC_GSMRL_TDCR_8 ((uint)0x00010000) -#define SCC_GSMRL_TDCR_1 ((uint)0x00000000) -#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) -#define SCC_GSMRL_RDCR_16 ((uint)0x00008000) -#define SCC_GSMRL_RDCR_8 ((uint)0x00004000) -#define SCC_GSMRL_RDCR_1 ((uint)0x00000000) -#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) -#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) -#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) -#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) -#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) -#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) -#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) -#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) -#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) -#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) -#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ -#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) -#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) -#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) -#define SCC_GSMRL_ENR ((uint)0x00000020) -#define SCC_GSMRL_ENT ((uint)0x00000010) -#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) -#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) -#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) -#define SCC_GSMRL_MODE_V14 ((uint)0x00000007) -#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) -#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) -#define SCC_GSMRL_MODE_UART ((uint)0x00000004) -#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) -#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) -#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) - -#define SCC_TODR_TOD ((ushort)0x8000) - -/* SCC Event and Mask register. -*/ -#define SCCM_TXE ((unsigned char)0x10) -#define SCCM_BSY ((unsigned char)0x04) -#define SCCM_TX ((unsigned char)0x02) -#define SCCM_RX ((unsigned char)0x01) - -typedef struct scc_param { - ushort scc_rbase; /* Rx Buffer descriptor base address */ - ushort scc_tbase; /* Tx Buffer descriptor base address */ - u_char scc_rfcr; /* Rx function code */ - u_char scc_tfcr; /* Tx function code */ - ushort scc_mrblr; /* Max receive buffer length */ - uint scc_rstate; /* Internal */ - uint scc_idp; /* Internal */ - ushort scc_rbptr; /* Internal */ - ushort scc_ibc; /* Internal */ - uint scc_rxtmp; /* Internal */ - uint scc_tstate; /* Internal */ - uint scc_tdp; /* Internal */ - ushort scc_tbptr; /* Internal */ - ushort scc_tbc; /* Internal */ - uint scc_txtmp; /* Internal */ - uint scc_rcrc; /* Internal */ - uint scc_tcrc; /* Internal */ -} sccp_t; - -/* CPM Ethernet through SCC1. - */ -typedef struct scc_enet { - sccp_t sen_genscc; - uint sen_cpres; /* Preset CRC */ - uint sen_cmask; /* Constant mask for CRC */ - uint sen_crcec; /* CRC Error counter */ - uint sen_alec; /* alignment error counter */ - uint sen_disfc; /* discard frame counter */ - ushort sen_pads; /* Tx short frame pad character */ - ushort sen_retlim; /* Retry limit threshold */ - ushort sen_retcnt; /* Retry limit counter */ - ushort sen_maxflr; /* maximum frame length register */ - ushort sen_minflr; /* minimum frame length register */ - ushort sen_maxd1; /* maximum DMA1 length */ - ushort sen_maxd2; /* maximum DMA2 length */ - ushort sen_maxd; /* Rx max DMA */ - ushort sen_dmacnt; /* Rx DMA counter */ - ushort sen_maxb; /* Max BD byte count */ - ushort sen_gaddr1; /* Group address filter */ - ushort sen_gaddr2; - ushort sen_gaddr3; - ushort sen_gaddr4; - uint sen_tbuf0data0; /* Save area 0 - current frame */ - uint sen_tbuf0data1; /* Save area 1 - current frame */ - uint sen_tbuf0rba; /* Internal */ - uint sen_tbuf0crc; /* Internal */ - ushort sen_tbuf0bcnt; /* Internal */ - ushort sen_paddrh; /* physical address (MSB) */ - ushort sen_paddrm; - ushort sen_paddrl; /* physical address (LSB) */ - ushort sen_pper; /* persistence */ - ushort sen_rfbdptr; /* Rx first BD pointer */ - ushort sen_tfbdptr; /* Tx first BD pointer */ - ushort sen_tlbdptr; /* Tx last BD pointer */ - uint sen_tbuf1data0; /* Save area 0 - current frame */ - uint sen_tbuf1data1; /* Save area 1 - current frame */ - uint sen_tbuf1rba; /* Internal */ - uint sen_tbuf1crc; /* Internal */ - ushort sen_tbuf1bcnt; /* Internal */ - ushort sen_txlen; /* Tx Frame length counter */ - ushort sen_iaddr1; /* Individual address filter */ - ushort sen_iaddr2; - ushort sen_iaddr3; - ushort sen_iaddr4; - ushort sen_boffcnt; /* Backoff counter */ - - /* NOTE: Some versions of the manual have the following items - * incorrectly documented. Below is the proper order. - */ - ushort sen_taddrh; /* temp address (MSB) */ - ushort sen_taddrm; - ushort sen_taddrl; /* temp address (LSB) */ -} scc_enet_t; - - -/* SCC Event register as used by Ethernet. -*/ -#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ -#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ -#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ -#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ -#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ -#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ - -/* SCC Mode Register (PSMR) as used by Ethernet. -*/ -#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */ -#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */ -#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */ -#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */ -#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ -#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */ -#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ -#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */ -#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */ -#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */ -#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */ -#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */ -#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */ - -/* Buffer descriptor control/status used by Ethernet receive. - * Common to SCC and FCC. - */ -#define BD_ENET_RX_EMPTY ((ushort)0x8000) -#define BD_ENET_RX_WRAP ((ushort)0x2000) -#define BD_ENET_RX_INTR ((ushort)0x1000) -#define BD_ENET_RX_LAST ((ushort)0x0800) -#define BD_ENET_RX_FIRST ((ushort)0x0400) -#define BD_ENET_RX_MISS ((ushort)0x0100) -#define BD_ENET_RX_BC ((ushort)0x0080) /* FCC Only */ -#define BD_ENET_RX_MC ((ushort)0x0040) /* FCC Only */ -#define BD_ENET_RX_LG ((ushort)0x0020) -#define BD_ENET_RX_NO ((ushort)0x0010) -#define BD_ENET_RX_SH ((ushort)0x0008) -#define BD_ENET_RX_CR ((ushort)0x0004) -#define BD_ENET_RX_OV ((ushort)0x0002) -#define BD_ENET_RX_CL ((ushort)0x0001) -#define BD_ENET_RX_STATS ((ushort)0x01ff) /* All status bits */ - -/* Buffer descriptor control/status used by Ethernet transmit. - * Common to SCC and FCC. - */ -#define BD_ENET_TX_READY ((ushort)0x8000) -#define BD_ENET_TX_PAD ((ushort)0x4000) -#define BD_ENET_TX_WRAP ((ushort)0x2000) -#define BD_ENET_TX_INTR ((ushort)0x1000) -#define BD_ENET_TX_LAST ((ushort)0x0800) -#define BD_ENET_TX_TC ((ushort)0x0400) -#define BD_ENET_TX_DEF ((ushort)0x0200) -#define BD_ENET_TX_HB ((ushort)0x0100) -#define BD_ENET_TX_LC ((ushort)0x0080) -#define BD_ENET_TX_RL ((ushort)0x0040) -#define BD_ENET_TX_RCMASK ((ushort)0x003c) -#define BD_ENET_TX_UN ((ushort)0x0002) -#define BD_ENET_TX_CSL ((ushort)0x0001) -#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */ - -/* SCC as UART -*/ -typedef struct scc_uart { - sccp_t scc_genscc; - uint scc_res1; /* Reserved */ - uint scc_res2; /* Reserved */ - ushort scc_maxidl; /* Maximum idle chars */ - ushort scc_idlc; /* temp idle counter */ - ushort scc_brkcr; /* Break count register */ - ushort scc_parec; /* receive parity error counter */ - ushort scc_frmec; /* receive framing error counter */ - ushort scc_nosec; /* receive noise counter */ - ushort scc_brkec; /* receive break condition counter */ - ushort scc_brkln; /* last received break length */ - ushort scc_uaddr1; /* UART address character 1 */ - ushort scc_uaddr2; /* UART address character 2 */ - ushort scc_rtemp; /* Temp storage */ - ushort scc_toseq; /* Transmit out of sequence char */ - ushort scc_char1; /* control character 1 */ - ushort scc_char2; /* control character 2 */ - ushort scc_char3; /* control character 3 */ - ushort scc_char4; /* control character 4 */ - ushort scc_char5; /* control character 5 */ - ushort scc_char6; /* control character 6 */ - ushort scc_char7; /* control character 7 */ - ushort scc_char8; /* control character 8 */ - ushort scc_rccm; /* receive control character mask */ - ushort scc_rccr; /* receive control character register */ - ushort scc_rlbc; /* receive last break character */ -} scc_uart_t; - -/* SCC Event and Mask registers when it is used as a UART. -*/ -#define UART_SCCM_GLR ((ushort)0x1000) -#define UART_SCCM_GLT ((ushort)0x0800) -#define UART_SCCM_AB ((ushort)0x0200) -#define UART_SCCM_IDL ((ushort)0x0100) -#define UART_SCCM_GRA ((ushort)0x0080) -#define UART_SCCM_BRKE ((ushort)0x0040) -#define UART_SCCM_BRKS ((ushort)0x0020) -#define UART_SCCM_CCR ((ushort)0x0008) -#define UART_SCCM_BSY ((ushort)0x0004) -#define UART_SCCM_TX ((ushort)0x0002) -#define UART_SCCM_RX ((ushort)0x0001) - -/* The SCC PSMR when used as a UART. -*/ -#define SCU_PSMR_FLC ((ushort)0x8000) -#define SCU_PSMR_SL ((ushort)0x4000) -#define SCU_PSMR_CL ((ushort)0x3000) -#define SCU_PSMR_UM ((ushort)0x0c00) -#define SCU_PSMR_FRZ ((ushort)0x0200) -#define SCU_PSMR_RZS ((ushort)0x0100) -#define SCU_PSMR_SYN ((ushort)0x0080) -#define SCU_PSMR_DRT ((ushort)0x0040) -#define SCU_PSMR_PEN ((ushort)0x0010) -#define SCU_PSMR_RPM ((ushort)0x000c) -#define SCU_PSMR_REVP ((ushort)0x0008) -#define SCU_PSMR_TPM ((ushort)0x0003) -#define SCU_PSMR_TEVP ((ushort)0x0002) - -/* CPM Transparent mode SCC. - */ -typedef struct scc_trans { - sccp_t st_genscc; - uint st_cpres; /* Preset CRC */ - uint st_cmask; /* Constant mask for CRC */ -} scc_trans_t; - -#define BD_SCC_TX_LAST ((ushort)0x0800) - -/* How about some FCCs..... -*/ -#define FCC_GFMR_DIAG_NORM ((uint)0x00000000) -#define FCC_GFMR_DIAG_LE ((uint)0x40000000) -#define FCC_GFMR_DIAG_AE ((uint)0x80000000) -#define FCC_GFMR_DIAG_ALE ((uint)0xc0000000) -#define FCC_GFMR_TCI ((uint)0x20000000) -#define FCC_GFMR_TRX ((uint)0x10000000) -#define FCC_GFMR_TTX ((uint)0x08000000) -#define FCC_GFMR_TTX ((uint)0x08000000) -#define FCC_GFMR_CDP ((uint)0x04000000) -#define FCC_GFMR_CTSP ((uint)0x02000000) -#define FCC_GFMR_CDS ((uint)0x01000000) -#define FCC_GFMR_CTSS ((uint)0x00800000) -#define FCC_GFMR_SYNL_NONE ((uint)0x00000000) -#define FCC_GFMR_SYNL_AUTO ((uint)0x00004000) -#define FCC_GFMR_SYNL_8 ((uint)0x00008000) -#define FCC_GFMR_SYNL_16 ((uint)0x0000c000) -#define FCC_GFMR_RTSM ((uint)0x00002000) -#define FCC_GFMR_RENC_NRZ ((uint)0x00000000) -#define FCC_GFMR_RENC_NRZI ((uint)0x00000800) -#define FCC_GFMR_REVD ((uint)0x00000400) -#define FCC_GFMR_TENC_NRZ ((uint)0x00000000) -#define FCC_GFMR_TENC_NRZI ((uint)0x00000100) -#define FCC_GFMR_TCRC_16 ((uint)0x00000000) -#define FCC_GFMR_TCRC_32 ((uint)0x00000080) -#define FCC_GFMR_ENR ((uint)0x00000020) -#define FCC_GFMR_ENT ((uint)0x00000010) -#define FCC_GFMR_MODE_ENET ((uint)0x0000000c) -#define FCC_GFMR_MODE_ATM ((uint)0x0000000a) -#define FCC_GFMR_MODE_HDLC ((uint)0x00000000) - -/* Generic FCC parameter ram. -*/ -typedef struct fcc_param { - ushort fcc_riptr; /* Rx Internal temp pointer */ - ushort fcc_tiptr; /* Tx Internal temp pointer */ - ushort fcc_res1; - ushort fcc_mrblr; /* Max receive buffer length, mod 32 bytes */ - uint fcc_rstate; /* Upper byte is Func code, must be set */ - uint fcc_rbase; /* Receive BD base */ - ushort fcc_rbdstat; /* RxBD status */ - ushort fcc_rbdlen; /* RxBD down counter */ - uint fcc_rdptr; /* RxBD internal data pointer */ - uint fcc_tstate; /* Upper byte is Func code, must be set */ - uint fcc_tbase; /* Transmit BD base */ - ushort fcc_tbdstat; /* TxBD status */ - ushort fcc_tbdlen; /* TxBD down counter */ - uint fcc_tdptr; /* TxBD internal data pointer */ - uint fcc_rbptr; /* Rx BD Internal buf pointer */ - uint fcc_tbptr; /* Tx BD Internal buf pointer */ - uint fcc_rcrc; /* Rx temp CRC */ - uint fcc_res2; - uint fcc_tcrc; /* Tx temp CRC */ -} fccp_t; - - -/* Ethernet controller through FCC. -*/ -typedef struct fcc_enet { - fccp_t fen_genfcc; - uint fen_statbuf; /* Internal status buffer */ - uint fen_camptr; /* CAM address */ - uint fen_cmask; /* Constant mask for CRC */ - uint fen_cpres; /* Preset CRC */ - uint fen_crcec; /* CRC Error counter */ - uint fen_alec; /* alignment error counter */ - uint fen_disfc; /* discard frame counter */ - ushort fen_retlim; /* Retry limit */ - ushort fen_retcnt; /* Retry counter */ - ushort fen_pper; /* Persistence */ - ushort fen_boffcnt; /* backoff counter */ - uint fen_gaddrh; /* Group address filter, high 32-bits */ - uint fen_gaddrl; /* Group address filter, low 32-bits */ - ushort fen_tfcstat; /* out of sequence TxBD */ - ushort fen_tfclen; - uint fen_tfcptr; - ushort fen_mflr; /* Maximum frame length (1518) */ - ushort fen_paddrh; /* MAC address */ - ushort fen_paddrm; - ushort fen_paddrl; - ushort fen_ibdcount; /* Internal BD counter */ - ushort fen_ibdstart; /* Internal BD start pointer */ - ushort fen_ibdend; /* Internal BD end pointer */ - ushort fen_txlen; /* Internal Tx frame length counter */ - uint fen_ibdbase[8]; /* Internal use */ - uint fen_iaddrh; /* Individual address filter */ - uint fen_iaddrl; - ushort fen_minflr; /* Minimum frame length (64) */ - ushort fen_taddrh; /* Filter transfer MAC address */ - ushort fen_taddrm; - ushort fen_taddrl; - ushort fen_padptr; /* Pointer to pad byte buffer */ - ushort fen_cftype; /* control frame type */ - ushort fen_cfrange; /* control frame range */ - ushort fen_maxb; /* maximum BD count */ - ushort fen_maxd1; /* Max DMA1 length (1520) */ - ushort fen_maxd2; /* Max DMA2 length (1520) */ - ushort fen_maxd; /* internal max DMA count */ - ushort fen_dmacnt; /* internal DMA counter */ - uint fen_octc; /* Total octect counter */ - uint fen_colc; /* Total collision counter */ - uint fen_broc; /* Total broadcast packet counter */ - uint fen_mulc; /* Total multicast packet count */ - uint fen_uspc; /* Total packets < 64 bytes */ - uint fen_frgc; /* Total packets < 64 bytes with errors */ - uint fen_ospc; /* Total packets > 1518 */ - uint fen_jbrc; /* Total packets > 1518 with errors */ - uint fen_p64c; /* Total packets == 64 bytes */ - uint fen_p65c; /* Total packets 64 < bytes <= 127 */ - uint fen_p128c; /* Total packets 127 < bytes <= 255 */ - uint fen_p256c; /* Total packets 256 < bytes <= 511 */ - uint fen_p512c; /* Total packets 512 < bytes <= 1023 */ - uint fen_p1024c; /* Total packets 1024 < bytes <= 1518 */ - uint fen_cambuf; /* Internal CAM buffer poiner */ - ushort fen_rfthr; /* Received frames threshold */ - ushort fen_rfcnt; /* Received frames count */ -} fcc_enet_t; - -/* FCC Event/Mask register as used by Ethernet. -*/ -#define FCC_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ -#define FCC_ENET_RXC ((ushort)0x0040) /* Control Frame Received */ -#define FCC_ENET_TXC ((ushort)0x0020) /* Out of seq. Tx sent */ -#define FCC_ENET_TXE ((ushort)0x0010) /* Transmit Error */ -#define FCC_ENET_RXF ((ushort)0x0008) /* Full frame received */ -#define FCC_ENET_BSY ((ushort)0x0004) /* Busy. Rx Frame dropped */ -#define FCC_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ -#define FCC_ENET_RXB ((ushort)0x0001) /* A buffer was received */ - -/* FCC Mode Register (FPSMR) as used by Ethernet. -*/ -#define FCC_PSMR_HBC ((uint)0x80000000) /* Enable heartbeat */ -#define FCC_PSMR_FC ((uint)0x40000000) /* Force Collision */ -#define FCC_PSMR_SBT ((uint)0x20000000) /* Stop backoff timer */ -#define FCC_PSMR_LPB ((uint)0x10000000) /* Local protect. 1 = FDX */ -#define FCC_PSMR_LCW ((uint)0x08000000) /* Late collision select */ -#define FCC_PSMR_FDE ((uint)0x04000000) /* Full Duplex Enable */ -#define FCC_PSMR_MON ((uint)0x02000000) /* RMON Enable */ -#define FCC_PSMR_PRO ((uint)0x00400000) /* Promiscuous Enable */ -#define FCC_PSMR_FCE ((uint)0x00200000) /* Flow Control Enable */ -#define FCC_PSMR_RSH ((uint)0x00100000) /* Receive Short Frames */ -#define FCC_PSMR_CAM ((uint)0x00000400) /* CAM enable */ -#define FCC_PSMR_BRO ((uint)0x00000200) /* Broadcast pkt discard */ -#define FCC_PSMR_ENCRC ((uint)0x00000080) /* Use 32-bit CRC */ - -/* IIC parameter RAM. -*/ -typedef struct iic { - ushort iic_rbase; /* Rx Buffer descriptor base address */ - ushort iic_tbase; /* Tx Buffer descriptor base address */ - u_char iic_rfcr; /* Rx function code */ - u_char iic_tfcr; /* Tx function code */ - ushort iic_mrblr; /* Max receive buffer length */ - uint iic_rstate; /* Internal */ - uint iic_rdp; /* Internal */ - ushort iic_rbptr; /* Internal */ - ushort iic_rbc; /* Internal */ - uint iic_rxtmp; /* Internal */ - uint iic_tstate; /* Internal */ - uint iic_tdp; /* Internal */ - ushort iic_tbptr; /* Internal */ - ushort iic_tbc; /* Internal */ - uint iic_txtmp; /* Internal */ -} iic_t; - -/* SPI parameter RAM. -*/ -typedef struct spi { - ushort spi_rbase; /* Rx Buffer descriptor base address */ - ushort spi_tbase; /* Tx Buffer descriptor base address */ - u_char spi_rfcr; /* Rx function code */ - u_char spi_tfcr; /* Tx function code */ - ushort spi_mrblr; /* Max receive buffer length */ - uint spi_rstate; /* Internal */ - uint spi_rdp; /* Internal */ - ushort spi_rbptr; /* Internal */ - ushort spi_rbc; /* Internal */ - uint spi_rxtmp; /* Internal */ - uint spi_tstate; /* Internal */ - uint spi_tdp; /* Internal */ - ushort spi_tbptr; /* Internal */ - ushort spi_tbc; /* Internal */ - uint spi_txtmp; /* Internal */ - uint spi_res; /* Tx temp. */ - uint spi_res1[4]; /* SDMA temp. */ -} spi_t; - -/* SPI Mode register. -*/ -#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */ -#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */ -#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */ -#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */ -#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */ -#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */ -#define SPMODE_EN ((ushort)0x0100) /* Enable */ -#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */ -#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */ - -#define SPMODE_LEN(x) ((((x)-1)&0xF)<<4) -#define SPMODE_PM(x) ((x) &0xF) - -#define SPI_EB ((u_char)0x10) /* big endian byte order */ - -#define BD_IIC_START ((ushort)0x0400) - -/* IDMA parameter RAM -*/ -typedef struct idma { - ushort ibase; /* IDMA buffer descriptor table base address */ - ushort dcm; /* DMA channel mode */ - ushort ibdptr; /* IDMA current buffer descriptor pointer */ - ushort dpr_buf; /* IDMA transfer buffer base address */ - ushort buf_inv; /* internal buffer inventory */ - ushort ss_max; /* steady-state maximum transfer size */ - ushort dpr_in_ptr; /* write pointer inside the internal buffer */ - ushort sts; /* source transfer size */ - ushort dpr_out_ptr; /* read pointer inside the internal buffer */ - ushort seob; /* source end of burst */ - ushort deob; /* destination end of burst */ - ushort dts; /* destination transfer size */ - ushort ret_add; /* return address when working in ERM=1 mode */ - ushort res0; /* reserved */ - uint bd_cnt; /* internal byte count */ - uint s_ptr; /* source internal data pointer */ - uint d_ptr; /* destination internal data pointer */ - uint istate; /* internal state */ - u_char res1[20]; /* pad to 64-byte length */ -} idma_t; - -/* DMA channel mode bit fields -*/ -#define IDMA_DCM_FB ((ushort)0x8000) /* fly-by mode */ -#define IDMA_DCM_LP ((ushort)0x4000) /* low priority */ -#define IDMA_DCM_TC2 ((ushort)0x0400) /* value driven on TC[2] */ -#define IDMA_DCM_DMA_WRAP_MASK ((ushort)0x01c0) /* mask for DMA wrap */ -#define IDMA_DCM_DMA_WRAP_64 ((ushort)0x0000) /* 64-byte DMA xfer buffer */ -#define IDMA_DCM_DMA_WRAP_128 ((ushort)0x0040) /* 128-byte DMA xfer buffer */ -#define IDMA_DCM_DMA_WRAP_256 ((ushort)0x0080) /* 256-byte DMA xfer buffer */ -#define IDMA_DCM_DMA_WRAP_512 ((ushort)0x00c0) /* 512-byte DMA xfer buffer */ -#define IDMA_DCM_DMA_WRAP_1024 ((ushort)0x0100) /* 1024-byte DMA xfer buffer */ -#define IDMA_DCM_DMA_WRAP_2048 ((ushort)0x0140) /* 2048-byte DMA xfer buffer */ -#define IDMA_DCM_SINC ((ushort)0x0020) /* source inc addr */ -#define IDMA_DCM_DINC ((ushort)0x0010) /* destination inc addr */ -#define IDMA_DCM_ERM ((ushort)0x0008) /* external request mode */ -#define IDMA_DCM_DT ((ushort)0x0004) /* DONE treatment */ -#define IDMA_DCM_SD_MASK ((ushort)0x0003) /* mask for SD bit field */ -#define IDMA_DCM_SD_MEM2MEM ((ushort)0x0000) /* memory-to-memory xfer */ -#define IDMA_DCM_SD_PER2MEM ((ushort)0x0002) /* peripheral-to-memory xfer */ -#define IDMA_DCM_SD_MEM2PER ((ushort)0x0001) /* memory-to-peripheral xfer */ - -/* IDMA Buffer Descriptors -*/ -typedef struct idma_bd { - uint flags; - uint len; /* data length */ - uint src; /* source data buffer pointer */ - uint dst; /* destination data buffer pointer */ -} idma_bd_t; - -/* IDMA buffer descriptor flag bit fields -*/ -#define IDMA_BD_V ((uint)0x80000000) /* valid */ -#define IDMA_BD_W ((uint)0x20000000) /* wrap */ -#define IDMA_BD_I ((uint)0x10000000) /* interrupt */ -#define IDMA_BD_L ((uint)0x08000000) /* last */ -#define IDMA_BD_CM ((uint)0x02000000) /* continuous mode */ -#define IDMA_BD_SDN ((uint)0x00400000) /* source done */ -#define IDMA_BD_DDN ((uint)0x00200000) /* destination done */ -#define IDMA_BD_DGBL ((uint)0x00100000) /* destination global */ -#define IDMA_BD_DBO_LE ((uint)0x00040000) /* little-end dest byte order */ -#define IDMA_BD_DBO_BE ((uint)0x00080000) /* big-end dest byte order */ -#define IDMA_BD_DDTB ((uint)0x00010000) /* destination data bus */ -#define IDMA_BD_SGBL ((uint)0x00002000) /* source global */ -#define IDMA_BD_SBO_LE ((uint)0x00000800) /* little-end src byte order */ -#define IDMA_BD_SBO_BE ((uint)0x00001000) /* big-end src byte order */ -#define IDMA_BD_SDTB ((uint)0x00000200) /* source data bus */ - -/* per-channel IDMA registers -*/ -typedef struct im_idma { - u_char idsr; /* IDMAn event status register */ - u_char res0[3]; - u_char idmr; /* IDMAn event mask register */ - u_char res1[3]; -} im_idma_t; - -/* IDMA event register bit fields -*/ -#define IDMA_EVENT_SC ((unsigned char)0x08) /* stop completed */ -#define IDMA_EVENT_OB ((unsigned char)0x04) /* out of buffers */ -#define IDMA_EVENT_EDN ((unsigned char)0x02) /* external DONE asserted */ -#define IDMA_EVENT_BC ((unsigned char)0x01) /* buffer descriptor complete */ - -/* RISC Controller Configuration Register (RCCR) bit fields -*/ -#define RCCR_TIME ((uint)0x80000000) /* timer enable */ -#define RCCR_TIMEP_MASK ((uint)0x3f000000) /* mask for timer period bit field */ -#define RCCR_DR0M ((uint)0x00800000) /* IDMA0 request mode */ -#define RCCR_DR1M ((uint)0x00400000) /* IDMA1 request mode */ -#define RCCR_DR2M ((uint)0x00000080) /* IDMA2 request mode */ -#define RCCR_DR3M ((uint)0x00000040) /* IDMA3 request mode */ -#define RCCR_DR0QP_MASK ((uint)0x00300000) /* mask for IDMA0 req priority */ -#define RCCR_DR0QP_HIGH ((uint)0x00000000) /* IDMA0 has high req priority */ -#define RCCR_DR0QP_MED ((uint)0x00100000) /* IDMA0 has medium req priority */ -#define RCCR_DR0QP_LOW ((uint)0x00200000) /* IDMA0 has low req priority */ -#define RCCR_DR1QP_MASK ((uint)0x00030000) /* mask for IDMA1 req priority */ -#define RCCR_DR1QP_HIGH ((uint)0x00000000) /* IDMA1 has high req priority */ -#define RCCR_DR1QP_MED ((uint)0x00010000) /* IDMA1 has medium req priority */ -#define RCCR_DR1QP_LOW ((uint)0x00020000) /* IDMA1 has low req priority */ -#define RCCR_DR2QP_MASK ((uint)0x00000030) /* mask for IDMA2 req priority */ -#define RCCR_DR2QP_HIGH ((uint)0x00000000) /* IDMA2 has high req priority */ -#define RCCR_DR2QP_MED ((uint)0x00000010) /* IDMA2 has medium req priority */ -#define RCCR_DR2QP_LOW ((uint)0x00000020) /* IDMA2 has low req priority */ -#define RCCR_DR3QP_MASK ((uint)0x00000003) /* mask for IDMA3 req priority */ -#define RCCR_DR3QP_HIGH ((uint)0x00000000) /* IDMA3 has high req priority */ -#define RCCR_DR3QP_MED ((uint)0x00000001) /* IDMA3 has medium req priority */ -#define RCCR_DR3QP_LOW ((uint)0x00000002) /* IDMA3 has low req priority */ -#define RCCR_EIE ((uint)0x00080000) /* external interrupt enable */ -#define RCCR_SCD ((uint)0x00040000) /* scheduler configuration */ -#define RCCR_ERAM_MASK ((uint)0x0000e000) /* mask for enable RAM microcode */ -#define RCCR_ERAM_0KB ((uint)0x00000000) /* use 0KB of dpram for microcode */ -#define RCCR_ERAM_2KB ((uint)0x00002000) /* use 2KB of dpram for microcode */ -#define RCCR_ERAM_4KB ((uint)0x00004000) /* use 4KB of dpram for microcode */ -#define RCCR_ERAM_6KB ((uint)0x00006000) /* use 6KB of dpram for microcode */ -#define RCCR_ERAM_8KB ((uint)0x00008000) /* use 8KB of dpram for microcode */ -#define RCCR_ERAM_10KB ((uint)0x0000a000) /* use 10KB of dpram for microcode */ -#define RCCR_ERAM_12KB ((uint)0x0000c000) /* use 12KB of dpram for microcode */ -#define RCCR_EDM0 ((uint)0x00000800) /* DREQ0 edge detect mode */ -#define RCCR_EDM1 ((uint)0x00000400) /* DREQ1 edge detect mode */ -#define RCCR_EDM2 ((uint)0x00000200) /* DREQ2 edge detect mode */ -#define RCCR_EDM3 ((uint)0x00000100) /* DREQ3 edge detect mode */ -#define RCCR_DEM01 ((uint)0x00000008) /* DONE0/DONE1 edge detect mode */ -#define RCCR_DEM23 ((uint)0x00000004) /* DONE2/DONE3 edge detect mode */ - -/*----------------------------------------------------------------------- - * CMXFCR - CMX FCC Clock Route Register - */ -#define CMXFCR_FC1 0x40000000 /* FCC1 connection */ -#define CMXFCR_RF1CS_MSK 0x38000000 /* Receive FCC1 Clock Source Mask */ -#define CMXFCR_TF1CS_MSK 0x07000000 /* Transmit FCC1 Clock Source Mask */ -#define CMXFCR_FC2 0x00400000 /* FCC2 connection */ -#define CMXFCR_RF2CS_MSK 0x00380000 /* Receive FCC2 Clock Source Mask */ -#define CMXFCR_TF2CS_MSK 0x00070000 /* Transmit FCC2 Clock Source Mask */ -#define CMXFCR_FC3 0x00004000 /* FCC3 connection */ -#define CMXFCR_RF3CS_MSK 0x00003800 /* Receive FCC3 Clock Source Mask */ -#define CMXFCR_TF3CS_MSK 0x00000700 /* Transmit FCC3 Clock Source Mask */ - -#define CMXFCR_RF1CS_BRG5 0x00000000 /* Receive FCC1 Clock Source is BRG5 */ -#define CMXFCR_RF1CS_BRG6 0x08000000 /* Receive FCC1 Clock Source is BRG6 */ -#define CMXFCR_RF1CS_BRG7 0x10000000 /* Receive FCC1 Clock Source is BRG7 */ -#define CMXFCR_RF1CS_BRG8 0x18000000 /* Receive FCC1 Clock Source is BRG8 */ -#define CMXFCR_RF1CS_CLK9 0x20000000 /* Receive FCC1 Clock Source is CLK9 */ -#define CMXFCR_RF1CS_CLK10 0x28000000 /* Receive FCC1 Clock Source is CLK10 */ -#define CMXFCR_RF1CS_CLK11 0x30000000 /* Receive FCC1 Clock Source is CLK11 */ -#define CMXFCR_RF1CS_CLK12 0x38000000 /* Receive FCC1 Clock Source is CLK12 */ - -#define CMXFCR_TF1CS_BRG5 0x00000000 /* Transmit FCC1 Clock Source is BRG5 */ -#define CMXFCR_TF1CS_BRG6 0x01000000 /* Transmit FCC1 Clock Source is BRG6 */ -#define CMXFCR_TF1CS_BRG7 0x02000000 /* Transmit FCC1 Clock Source is BRG7 */ -#define CMXFCR_TF1CS_BRG8 0x03000000 /* Transmit FCC1 Clock Source is BRG8 */ -#define CMXFCR_TF1CS_CLK9 0x04000000 /* Transmit FCC1 Clock Source is CLK9 */ -#define CMXFCR_TF1CS_CLK10 0x05000000 /* Transmit FCC1 Clock Source is CLK10 */ -#define CMXFCR_TF1CS_CLK11 0x06000000 /* Transmit FCC1 Clock Source is CLK11 */ -#define CMXFCR_TF1CS_CLK12 0x07000000 /* Transmit FCC1 Clock Source is CLK12 */ - -#define CMXFCR_RF2CS_BRG5 0x00000000 /* Receive FCC2 Clock Source is BRG5 */ -#define CMXFCR_RF2CS_BRG6 0x00080000 /* Receive FCC2 Clock Source is BRG6 */ -#define CMXFCR_RF2CS_BRG7 0x00100000 /* Receive FCC2 Clock Source is BRG7 */ -#define CMXFCR_RF2CS_BRG8 0x00180000 /* Receive FCC2 Clock Source is BRG8 */ -#define CMXFCR_RF2CS_CLK13 0x00200000 /* Receive FCC2 Clock Source is CLK13 */ -#define CMXFCR_RF2CS_CLK14 0x00280000 /* Receive FCC2 Clock Source is CLK14 */ -#define CMXFCR_RF2CS_CLK15 0x00300000 /* Receive FCC2 Clock Source is CLK15 */ -#define CMXFCR_RF2CS_CLK16 0x00380000 /* Receive FCC2 Clock Source is CLK16 */ - -#define CMXFCR_TF2CS_BRG5 0x00000000 /* Transmit FCC2 Clock Source is BRG5 */ -#define CMXFCR_TF2CS_BRG6 0x00010000 /* Transmit FCC2 Clock Source is BRG6 */ -#define CMXFCR_TF2CS_BRG7 0x00020000 /* Transmit FCC2 Clock Source is BRG7 */ -#define CMXFCR_TF2CS_BRG8 0x00030000 /* Transmit FCC2 Clock Source is BRG8 */ -#define CMXFCR_TF2CS_CLK13 0x00040000 /* Transmit FCC2 Clock Source is CLK13 */ -#define CMXFCR_TF2CS_CLK14 0x00050000 /* Transmit FCC2 Clock Source is CLK14 */ -#define CMXFCR_TF2CS_CLK15 0x00060000 /* Transmit FCC2 Clock Source is CLK15 */ -#define CMXFCR_TF2CS_CLK16 0x00070000 /* Transmit FCC2 Clock Source is CLK16 */ - -#define CMXFCR_RF3CS_BRG5 0x00000000 /* Receive FCC3 Clock Source is BRG5 */ -#define CMXFCR_RF3CS_BRG6 0x00000800 /* Receive FCC3 Clock Source is BRG6 */ -#define CMXFCR_RF3CS_BRG7 0x00001000 /* Receive FCC3 Clock Source is BRG7 */ -#define CMXFCR_RF3CS_BRG8 0x00001800 /* Receive FCC3 Clock Source is BRG8 */ -#define CMXFCR_RF3CS_CLK13 0x00002000 /* Receive FCC3 Clock Source is CLK13 */ -#define CMXFCR_RF3CS_CLK14 0x00002800 /* Receive FCC3 Clock Source is CLK14 */ -#define CMXFCR_RF3CS_CLK15 0x00003000 /* Receive FCC3 Clock Source is CLK15 */ -#define CMXFCR_RF3CS_CLK16 0x00003800 /* Receive FCC3 Clock Source is CLK16 */ - -#define CMXFCR_TF3CS_BRG5 0x00000000 /* Transmit FCC3 Clock Source is BRG5 */ -#define CMXFCR_TF3CS_BRG6 0x00000100 /* Transmit FCC3 Clock Source is BRG6 */ -#define CMXFCR_TF3CS_BRG7 0x00000200 /* Transmit FCC3 Clock Source is BRG7 */ -#define CMXFCR_TF3CS_BRG8 0x00000300 /* Transmit FCC3 Clock Source is BRG8 */ -#define CMXFCR_TF3CS_CLK13 0x00000400 /* Transmit FCC3 Clock Source is CLK13 */ -#define CMXFCR_TF3CS_CLK14 0x00000500 /* Transmit FCC3 Clock Source is CLK14 */ -#define CMXFCR_TF3CS_CLK15 0x00000600 /* Transmit FCC3 Clock Source is CLK15 */ -#define CMXFCR_TF3CS_CLK16 0x00000700 /* Transmit FCC3 Clock Source is CLK16 */ - -/*----------------------------------------------------------------------- - * CMXSCR - CMX SCC Clock Route Register - */ -#define CMXSCR_GR1 0x80000000 /* Grant Support of SCC1 */ -#define CMXSCR_SC1 0x40000000 /* SCC1 connection */ -#define CMXSCR_RS1CS_MSK 0x38000000 /* Receive SCC1 Clock Source Mask */ -#define CMXSCR_TS1CS_MSK 0x07000000 /* Transmit SCC1 Clock Source Mask */ -#define CMXSCR_GR2 0x00800000 /* Grant Support of SCC2 */ -#define CMXSCR_SC2 0x00400000 /* SCC2 connection */ -#define CMXSCR_RS2CS_MSK 0x00380000 /* Receive SCC2 Clock Source Mask */ -#define CMXSCR_TS2CS_MSK 0x00070000 /* Transmit SCC2 Clock Source Mask */ -#define CMXSCR_GR3 0x00008000 /* Grant Support of SCC3 */ -#define CMXSCR_SC3 0x00004000 /* SCC3 connection */ -#define CMXSCR_RS3CS_MSK 0x00003800 /* Receive SCC3 Clock Source Mask */ -#define CMXSCR_TS3CS_MSK 0x00000700 /* Transmit SCC3 Clock Source Mask */ -#define CMXSCR_GR4 0x00000080 /* Grant Support of SCC4 */ -#define CMXSCR_SC4 0x00000040 /* SCC4 connection */ -#define CMXSCR_RS4CS_MSK 0x00000038 /* Receive SCC4 Clock Source Mask */ -#define CMXSCR_TS4CS_MSK 0x00000007 /* Transmit SCC4 Clock Source Mask */ - -#define CMXSCR_RS1CS_BRG1 0x00000000 /* SCC1 Rx Clock Source is BRG1 */ -#define CMXSCR_RS1CS_BRG2 0x08000000 /* SCC1 Rx Clock Source is BRG2 */ -#define CMXSCR_RS1CS_BRG3 0x10000000 /* SCC1 Rx Clock Source is BRG3 */ -#define CMXSCR_RS1CS_BRG4 0x18000000 /* SCC1 Rx Clock Source is BRG4 */ -#define CMXSCR_RS1CS_CLK11 0x20000000 /* SCC1 Rx Clock Source is CLK11 */ -#define CMXSCR_RS1CS_CLK12 0x28000000 /* SCC1 Rx Clock Source is CLK12 */ -#define CMXSCR_RS1CS_CLK3 0x30000000 /* SCC1 Rx Clock Source is CLK3 */ -#define CMXSCR_RS1CS_CLK4 0x38000000 /* SCC1 Rx Clock Source is CLK4 */ - -#define CMXSCR_TS1CS_BRG1 0x00000000 /* SCC1 Tx Clock Source is BRG1 */ -#define CMXSCR_TS1CS_BRG2 0x01000000 /* SCC1 Tx Clock Source is BRG2 */ -#define CMXSCR_TS1CS_BRG3 0x02000000 /* SCC1 Tx Clock Source is BRG3 */ -#define CMXSCR_TS1CS_BRG4 0x03000000 /* SCC1 Tx Clock Source is BRG4 */ -#define CMXSCR_TS1CS_CLK11 0x04000000 /* SCC1 Tx Clock Source is CLK11 */ -#define CMXSCR_TS1CS_CLK12 0x05000000 /* SCC1 Tx Clock Source is CLK12 */ -#define CMXSCR_TS1CS_CLK3 0x06000000 /* SCC1 Tx Clock Source is CLK3 */ -#define CMXSCR_TS1CS_CLK4 0x07000000 /* SCC1 Tx Clock Source is CLK4 */ - -#define CMXSCR_RS2CS_BRG1 0x00000000 /* SCC2 Rx Clock Source is BRG1 */ -#define CMXSCR_RS2CS_BRG2 0x00080000 /* SCC2 Rx Clock Source is BRG2 */ -#define CMXSCR_RS2CS_BRG3 0x00100000 /* SCC2 Rx Clock Source is BRG3 */ -#define CMXSCR_RS2CS_BRG4 0x00180000 /* SCC2 Rx Clock Source is BRG4 */ -#define CMXSCR_RS2CS_CLK11 0x00200000 /* SCC2 Rx Clock Source is CLK11 */ -#define CMXSCR_RS2CS_CLK12 0x00280000 /* SCC2 Rx Clock Source is CLK12 */ -#define CMXSCR_RS2CS_CLK3 0x00300000 /* SCC2 Rx Clock Source is CLK3 */ -#define CMXSCR_RS2CS_CLK4 0x00380000 /* SCC2 Rx Clock Source is CLK4 */ - -#define CMXSCR_TS2CS_BRG1 0x00000000 /* SCC2 Tx Clock Source is BRG1 */ -#define CMXSCR_TS2CS_BRG2 0x00010000 /* SCC2 Tx Clock Source is BRG2 */ -#define CMXSCR_TS2CS_BRG3 0x00020000 /* SCC2 Tx Clock Source is BRG3 */ -#define CMXSCR_TS2CS_BRG4 0x00030000 /* SCC2 Tx Clock Source is BRG4 */ -#define CMXSCR_TS2CS_CLK11 0x00040000 /* SCC2 Tx Clock Source is CLK11 */ -#define CMXSCR_TS2CS_CLK12 0x00050000 /* SCC2 Tx Clock Source is CLK12 */ -#define CMXSCR_TS2CS_CLK3 0x00060000 /* SCC2 Tx Clock Source is CLK3 */ -#define CMXSCR_TS2CS_CLK4 0x00070000 /* SCC2 Tx Clock Source is CLK4 */ - -#define CMXSCR_RS3CS_BRG1 0x00000000 /* SCC3 Rx Clock Source is BRG1 */ -#define CMXSCR_RS3CS_BRG2 0x00000800 /* SCC3 Rx Clock Source is BRG2 */ -#define CMXSCR_RS3CS_BRG3 0x00001000 /* SCC3 Rx Clock Source is BRG3 */ -#define CMXSCR_RS3CS_BRG4 0x00001800 /* SCC3 Rx Clock Source is BRG4 */ -#define CMXSCR_RS3CS_CLK5 0x00002000 /* SCC3 Rx Clock Source is CLK5 */ -#define CMXSCR_RS3CS_CLK6 0x00002800 /* SCC3 Rx Clock Source is CLK6 */ -#define CMXSCR_RS3CS_CLK7 0x00003000 /* SCC3 Rx Clock Source is CLK7 */ -#define CMXSCR_RS3CS_CLK8 0x00003800 /* SCC3 Rx Clock Source is CLK8 */ - -#define CMXSCR_TS3CS_BRG1 0x00000000 /* SCC3 Tx Clock Source is BRG1 */ -#define CMXSCR_TS3CS_BRG2 0x00000100 /* SCC3 Tx Clock Source is BRG2 */ -#define CMXSCR_TS3CS_BRG3 0x00000200 /* SCC3 Tx Clock Source is BRG3 */ -#define CMXSCR_TS3CS_BRG4 0x00000300 /* SCC3 Tx Clock Source is BRG4 */ -#define CMXSCR_TS3CS_CLK5 0x00000400 /* SCC3 Tx Clock Source is CLK5 */ -#define CMXSCR_TS3CS_CLK6 0x00000500 /* SCC3 Tx Clock Source is CLK6 */ -#define CMXSCR_TS3CS_CLK7 0x00000600 /* SCC3 Tx Clock Source is CLK7 */ -#define CMXSCR_TS3CS_CLK8 0x00000700 /* SCC3 Tx Clock Source is CLK8 */ - -#define CMXSCR_RS4CS_BRG1 0x00000000 /* SCC4 Rx Clock Source is BRG1 */ -#define CMXSCR_RS4CS_BRG2 0x00000008 /* SCC4 Rx Clock Source is BRG2 */ -#define CMXSCR_RS4CS_BRG3 0x00000010 /* SCC4 Rx Clock Source is BRG3 */ -#define CMXSCR_RS4CS_BRG4 0x00000018 /* SCC4 Rx Clock Source is BRG4 */ -#define CMXSCR_RS4CS_CLK5 0x00000020 /* SCC4 Rx Clock Source is CLK5 */ -#define CMXSCR_RS4CS_CLK6 0x00000028 /* SCC4 Rx Clock Source is CLK6 */ -#define CMXSCR_RS4CS_CLK7 0x00000030 /* SCC4 Rx Clock Source is CLK7 */ -#define CMXSCR_RS4CS_CLK8 0x00000038 /* SCC4 Rx Clock Source is CLK8 */ - -#define CMXSCR_TS4CS_BRG1 0x00000000 /* SCC4 Tx Clock Source is BRG1 */ -#define CMXSCR_TS4CS_BRG2 0x00000001 /* SCC4 Tx Clock Source is BRG2 */ -#define CMXSCR_TS4CS_BRG3 0x00000002 /* SCC4 Tx Clock Source is BRG3 */ -#define CMXSCR_TS4CS_BRG4 0x00000003 /* SCC4 Tx Clock Source is BRG4 */ -#define CMXSCR_TS4CS_CLK5 0x00000004 /* SCC4 Tx Clock Source is CLK5 */ -#define CMXSCR_TS4CS_CLK6 0x00000005 /* SCC4 Tx Clock Source is CLK6 */ -#define CMXSCR_TS4CS_CLK7 0x00000006 /* SCC4 Tx Clock Source is CLK7 */ -#define CMXSCR_TS4CS_CLK8 0x00000007 /* SCC4 Tx Clock Source is CLK8 */ - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration Register 4-31 - */ -#define SIUMCR_BBD 0x80000000 /* Bus Busy Disable */ -#define SIUMCR_ESE 0x40000000 /* External Snoop Enable */ -#define SIUMCR_PBSE 0x20000000 /* Parity Byte Select Enable */ -#define SIUMCR_CDIS 0x10000000 /* Core Disable */ -#define SIUMCR_DPPC00 0x00000000 /* Data Parity Pins Configuration*/ -#define SIUMCR_DPPC01 0x04000000 /* - " - */ -#define SIUMCR_DPPC10 0x08000000 /* - " - */ -#define SIUMCR_DPPC11 0x0c000000 /* - " - */ -#define SIUMCR_L2CPC00 0x00000000 /* L2 Cache Pins Configuration */ -#define SIUMCR_L2CPC01 0x01000000 /* - " - */ -#define SIUMCR_L2CPC10 0x02000000 /* - " - */ -#define SIUMCR_L2CPC11 0x03000000 /* - " - */ -#define SIUMCR_LBPC00 0x00000000 /* Local Bus Pins Configuration */ -#define SIUMCR_LBPC01 0x00400000 /* - " - */ -#define SIUMCR_LBPC10 0x00800000 /* - " - */ -#define SIUMCR_LBPC11 0x00c00000 /* - " - */ -#define SIUMCR_APPC00 0x00000000 /* Address Parity Pins Configuration*/ -#define SIUMCR_APPC01 0x00100000 /* - " - */ -#define SIUMCR_APPC10 0x00200000 /* - " - */ -#define SIUMCR_APPC11 0x00300000 /* - " - */ -#define SIUMCR_CS10PC00 0x00000000 /* CS10 Pin Configuration */ -#define SIUMCR_CS10PC01 0x00040000 /* - " - */ -#define SIUMCR_CS10PC10 0x00080000 /* - " - */ -#define SIUMCR_CS10PC11 0x000c0000 /* - " - */ -#define SIUMCR_BCTLC00 0x00000000 /* Buffer Control Configuration */ -#define SIUMCR_BCTLC01 0x00010000 /* - " - */ -#define SIUMCR_BCTLC10 0x00020000 /* - " - */ -#define SIUMCR_BCTLC11 0x00030000 /* - " - */ -#define SIUMCR_MMR00 0x00000000 /* Mask Masters Requests */ -#define SIUMCR_MMR01 0x00004000 /* - " - */ -#define SIUMCR_MMR10 0x00008000 /* - " - */ -#define SIUMCR_MMR11 0x0000c000 /* - " - */ -#define SIUMCR_LPBSE 0x00002000 /* LocalBus Parity Byte Select Enable*/ - -/*----------------------------------------------------------------------- - * SCCR - System Clock Control Register 9-8 -*/ -#define SCCR_PCI_MODE 0x00000100 /* PCI Mode */ -#define SCCR_PCI_MODCK 0x00000080 /* Value of PCI_MODCK pin */ -#define SCCR_PCIDF_MSK 0x00000078 /* PCI division factor */ -#define SCCR_PCIDF_SHIFT 3 - -#ifndef CPM_IMMR_OFFSET -#define CPM_IMMR_OFFSET 0x101a8 -#endif - -#define FCC_PSMR_RMII ((uint)0x00020000) /* Use RMII interface */ - -/* FCC iop & clock configuration. BSP code is responsible to define Fx_RXCLK & Fx_TXCLK - * in order to use clock-computing stuff below for the FCC x - */ - -/* Automatically generates register configurations */ -#define PC_CLK(x) ((uint)(1<<(x-1))) /* FCC CLK I/O ports */ - -#define CMXFCR_RF1CS(x) ((uint)((x-5)<<27)) /* FCC1 Receive Clock Source */ -#define CMXFCR_TF1CS(x) ((uint)((x-5)<<24)) /* FCC1 Transmit Clock Source */ -#define CMXFCR_RF2CS(x) ((uint)((x-9)<<19)) /* FCC2 Receive Clock Source */ -#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16)) /* FCC2 Transmit Clock Source */ -#define CMXFCR_RF3CS(x) ((uint)((x-9)<<11)) /* FCC3 Receive Clock Source */ -#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8)) /* FCC3 Transmit Clock Source */ - -#define PC_F1RXCLK PC_CLK(F1_RXCLK) -#define PC_F1TXCLK PC_CLK(F1_TXCLK) -#define CMX1_CLK_ROUTE (CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK)) -#define CMX1_CLK_MASK ((uint)0xff000000) - -#define PC_F2RXCLK PC_CLK(F2_RXCLK) -#define PC_F2TXCLK PC_CLK(F2_TXCLK) -#define CMX2_CLK_ROUTE (CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK)) -#define CMX2_CLK_MASK ((uint)0x00ff0000) - -#define PC_F3RXCLK PC_CLK(F3_RXCLK) -#define PC_F3TXCLK PC_CLK(F3_TXCLK) -#define CMX3_CLK_ROUTE (CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK)) -#define CMX3_CLK_MASK ((uint)0x0000ff00) - -#define CPMUX_CLK_MASK (CMX3_CLK_MASK | CMX2_CLK_MASK) -#define CPMUX_CLK_ROUTE (CMX3_CLK_ROUTE | CMX2_CLK_ROUTE) - -#define CLK_TRX (PC_F3TXCLK | PC_F3RXCLK | PC_F2TXCLK | PC_F2RXCLK) - -/* I/O Pin assignment for FCC1. I don't yet know the best way to do this, - * but there is little variation among the choices. - */ -#define PA1_COL 0x00000001U -#define PA1_CRS 0x00000002U -#define PA1_TXER 0x00000004U -#define PA1_TXEN 0x00000008U -#define PA1_RXDV 0x00000010U -#define PA1_RXER 0x00000020U -#define PA1_TXDAT 0x00003c00U -#define PA1_RXDAT 0x0003c000U -#define PA1_PSORA0 (PA1_RXDAT | PA1_TXDAT) -#define PA1_PSORA1 (PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \ - PA1_RXDV | PA1_RXER) -#define PA1_DIRA0 (PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV) -#define PA1_DIRA1 (PA1_TXDAT | PA1_TXEN | PA1_TXER) - - -/* I/O Pin assignment for FCC2. I don't yet know the best way to do this, - * but there is little variation among the choices. - */ -#define PB2_TXER 0x00000001U -#define PB2_RXDV 0x00000002U -#define PB2_TXEN 0x00000004U -#define PB2_RXER 0x00000008U -#define PB2_COL 0x00000010U -#define PB2_CRS 0x00000020U -#define PB2_TXDAT 0x000003c0U -#define PB2_RXDAT 0x00003c00U -#define PB2_PSORB0 (PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \ - PB2_RXER | PB2_RXDV | PB2_TXER) -#define PB2_PSORB1 (PB2_TXEN) -#define PB2_DIRB0 (PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV) -#define PB2_DIRB1 (PB2_TXDAT | PB2_TXEN | PB2_TXER) - - -/* I/O Pin assignment for FCC3. I don't yet know the best way to do this, - * but there is little variation among the choices. - */ -#define PB3_RXDV 0x00004000U -#define PB3_RXER 0x00008000U -#define PB3_TXER 0x00010000U -#define PB3_TXEN 0x00020000U -#define PB3_COL 0x00040000U -#define PB3_CRS 0x00080000U -#define PB3_TXDAT 0x0f000000U -#define PC3_TXDAT 0x00000010U -#define PB3_RXDAT 0x00f00000U -#define PB3_PSORB0 (PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \ - PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN) -#define PB3_PSORB1 0 -#define PB3_DIRB0 (PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV) -#define PB3_DIRB1 (PB3_TXDAT | PB3_TXEN | PB3_TXER) -#define PC3_DIRC1 (PC3_TXDAT) - -/* Handy macro to specify mem for FCCs*/ -#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128)) -#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0) -#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1) -#define FCC3_MEM_OFFSET FCC_MEM_OFFSET(2) - -/* Clocks and GRG's */ - -enum cpm_clk_dir { - CPM_CLK_RX, - CPM_CLK_TX, - CPM_CLK_RTX -}; - -enum cpm_clk_target { - CPM_CLK_SCC1, - CPM_CLK_SCC2, - CPM_CLK_SCC3, - CPM_CLK_SCC4, - CPM_CLK_FCC1, - CPM_CLK_FCC2, - CPM_CLK_FCC3 -}; - -enum cpm_clk { - CPM_CLK_NONE = 0, - CPM_BRG1, /* Baud Rate Generator 1 */ - CPM_BRG2, /* Baud Rate Generator 2 */ - CPM_BRG3, /* Baud Rate Generator 3 */ - CPM_BRG4, /* Baud Rate Generator 4 */ - CPM_BRG5, /* Baud Rate Generator 5 */ - CPM_BRG6, /* Baud Rate Generator 6 */ - CPM_BRG7, /* Baud Rate Generator 7 */ - CPM_BRG8, /* Baud Rate Generator 8 */ - CPM_CLK1, /* Clock 1 */ - CPM_CLK2, /* Clock 2 */ - CPM_CLK3, /* Clock 3 */ - CPM_CLK4, /* Clock 4 */ - CPM_CLK5, /* Clock 5 */ - CPM_CLK6, /* Clock 6 */ - CPM_CLK7, /* Clock 7 */ - CPM_CLK8, /* Clock 8 */ - CPM_CLK9, /* Clock 9 */ - CPM_CLK10, /* Clock 10 */ - CPM_CLK11, /* Clock 11 */ - CPM_CLK12, /* Clock 12 */ - CPM_CLK13, /* Clock 13 */ - CPM_CLK14, /* Clock 14 */ - CPM_CLK15, /* Clock 15 */ - CPM_CLK16, /* Clock 16 */ - CPM_CLK17, /* Clock 17 */ - CPM_CLK18, /* Clock 18 */ - CPM_CLK19, /* Clock 19 */ - CPM_CLK20, /* Clock 20 */ - CPM_CLK_DUMMY -}; - -extern int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode); - -#endif /* __CPM2__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/delay.h b/include/asm-ppc/delay.h deleted file mode 100644 index badde6845af2..000000000000 --- a/include/asm-ppc/delay.h +++ /dev/null @@ -1,66 +0,0 @@ -#ifdef __KERNEL__ -#ifndef _PPC_DELAY_H -#define _PPC_DELAY_H - -#include <asm/param.h> - -/* - * Copyright 1996, Paul Mackerras. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -extern unsigned long loops_per_jiffy; - -extern void __delay(unsigned int loops); - -/* - * Note that 19 * 226 == 4294 ==~ 2^32 / 10^6, so - * loops = (4294 * usecs * loops_per_jiffy * HZ) / 2^32. - * - * The mulhwu instruction gives us loops = (a * b) / 2^32. - * We choose a = usecs * 19 * HZ and b = loops_per_jiffy * 226 - * because this lets us support a wide range of HZ and - * loops_per_jiffy values without either a or b overflowing 2^32. - * Thus we need usecs * HZ <= (2^32 - 1) / 19 = 226050910 and - * loops_per_jiffy <= (2^32 - 1) / 226 = 19004280 - * (which corresponds to ~3800 bogomips at HZ = 100). - * -- paulus - */ -#define __MAX_UDELAY (226050910UL/HZ) /* maximum udelay argument */ -#define __MAX_NDELAY (4294967295UL/HZ) /* maximum ndelay argument */ - -extern __inline__ void __udelay(unsigned int x) -{ - unsigned int loops; - - __asm__("mulhwu %0,%1,%2" : "=r" (loops) : - "r" (x), "r" (loops_per_jiffy * 226)); - __delay(loops); -} - -extern __inline__ void __ndelay(unsigned int x) -{ - unsigned int loops; - - __asm__("mulhwu %0,%1,%2" : "=r" (loops) : - "r" (x), "r" (loops_per_jiffy * 5)); - __delay(loops); -} - -extern void __bad_udelay(void); /* deliberately undefined */ -extern void __bad_ndelay(void); /* deliberately undefined */ - -#define udelay(n) (__builtin_constant_p(n)? \ - ((n) > __MAX_UDELAY? __bad_udelay(): __udelay((n) * (19 * HZ))) : \ - __udelay((n) * (19 * HZ))) - -#define ndelay(n) (__builtin_constant_p(n)? \ - ((n) > __MAX_NDELAY? __bad_ndelay(): __ndelay((n) * HZ)) : \ - __ndelay((n) * HZ)) - -#endif /* defined(_PPC_DELAY_H) */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/device.h b/include/asm-ppc/device.h deleted file mode 100644 index d8f9872b0e2d..000000000000 --- a/include/asm-ppc/device.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#include <asm-generic/device.h> - diff --git a/include/asm-ppc/floppy.h b/include/asm-ppc/floppy.h deleted file mode 100644 index 7d9b3f430d92..000000000000 --- a/include/asm-ppc/floppy.h +++ /dev/null @@ -1,178 +0,0 @@ -/* - * Architecture specific parts of the Floppy driver - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995 - */ -#ifdef __KERNEL__ -#ifndef __ASM_PPC_FLOPPY_H -#define __ASM_PPC_FLOPPY_H - -#define fd_inb(port) inb_p(port) -#define fd_outb(value,port) outb_p(value,port) - -#define fd_disable_dma() fd_ops->_disable_dma(FLOPPY_DMA) -#define fd_free_dma() fd_ops->_free_dma(FLOPPY_DMA) -#define fd_get_dma_residue() fd_ops->_get_dma_residue(FLOPPY_DMA) -#define fd_dma_setup(addr, size, mode, io) fd_ops->_dma_setup(addr, size, mode, io) -#define fd_enable_irq() enable_irq(FLOPPY_IRQ) -#define fd_disable_irq() disable_irq(FLOPPY_IRQ) -#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL); - -static int fd_request_dma(void); - -struct fd_dma_ops { - void (*_disable_dma)(unsigned int dmanr); - void (*_free_dma)(unsigned int dmanr); - int (*_get_dma_residue)(unsigned int dummy); - int (*_dma_setup)(char *addr, unsigned long size, int mode, int io); -}; - -static int virtual_dma_count; -static int virtual_dma_residue; -static char *virtual_dma_addr; -static int virtual_dma_mode; -static int doing_vdma; -static struct fd_dma_ops *fd_ops; - -static irqreturn_t floppy_hardint(int irq, void *dev_id) -{ - unsigned char st; - int lcount; - char *lptr; - - if (!doing_vdma) - return floppy_interrupt(irq, dev_id); - - - st = 1; - for (lcount=virtual_dma_count, lptr=virtual_dma_addr; - lcount; lcount--, lptr++) { - st=inb(virtual_dma_port+4) & 0xa0 ; - if (st != 0xa0) - break; - if (virtual_dma_mode) - outb_p(*lptr, virtual_dma_port+5); - else - *lptr = inb_p(virtual_dma_port+5); - } - virtual_dma_count = lcount; - virtual_dma_addr = lptr; - st = inb(virtual_dma_port+4); - - if (st == 0x20) - return IRQ_HANDLED; - if (!(st & 0x20)) { - virtual_dma_residue += virtual_dma_count; - virtual_dma_count=0; - doing_vdma = 0; - floppy_interrupt(irq, dev_id); - return IRQ_HANDLED; - } - return IRQ_HANDLED; -} - -static void vdma_disable_dma(unsigned int dummy) -{ - doing_vdma = 0; - virtual_dma_residue += virtual_dma_count; - virtual_dma_count=0; -} - -static void vdma_nop(unsigned int dummy) -{ -} - - -static int vdma_get_dma_residue(unsigned int dummy) -{ - return virtual_dma_count + virtual_dma_residue; -} - - -static int fd_request_irq(void) -{ - if (can_use_virtual_dma) - return request_irq(FLOPPY_IRQ, floppy_hardint, - IRQF_DISABLED, "floppy", NULL); - else - return request_irq(FLOPPY_IRQ, floppy_interrupt, - IRQF_DISABLED, "floppy", NULL); -} - -static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io) -{ - doing_vdma = 1; - virtual_dma_port = io; - virtual_dma_mode = (mode == DMA_MODE_WRITE); - virtual_dma_addr = addr; - virtual_dma_count = size; - virtual_dma_residue = 0; - return 0; -} - -static int hard_dma_setup(char *addr, unsigned long size, int mode, int io) -{ - /* actual, physical DMA */ - doing_vdma = 0; - clear_dma_ff(FLOPPY_DMA); - set_dma_mode(FLOPPY_DMA,mode); - set_dma_addr(FLOPPY_DMA,(unsigned int)virt_to_bus(addr)); - set_dma_count(FLOPPY_DMA,size); - enable_dma(FLOPPY_DMA); - return 0; -} - -static struct fd_dma_ops real_dma_ops = -{ - ._disable_dma = disable_dma, - ._free_dma = free_dma, - ._get_dma_residue = get_dma_residue, - ._dma_setup = hard_dma_setup -}; - -static struct fd_dma_ops virt_dma_ops = -{ - ._disable_dma = vdma_disable_dma, - ._free_dma = vdma_nop, - ._get_dma_residue = vdma_get_dma_residue, - ._dma_setup = vdma_dma_setup -}; - -static int fd_request_dma() -{ - if (can_use_virtual_dma & 1) { - fd_ops = &virt_dma_ops; - return 0; - } - else { - fd_ops = &real_dma_ops; - return request_dma(FLOPPY_DMA, "floppy"); - } -} - -static int FDC1 = 0x3f0; -static int FDC2 = -1; - -/* - * Again, the CMOS information not available - */ -#define FLOPPY0_TYPE 6 -#define FLOPPY1_TYPE 0 - -#define N_FDC 2 /* Don't change this! */ -#define N_DRIVE 8 - -/* - * The PowerPC has no problems with floppy DMA crossing 64k borders. - */ -#define CROSS_64KB(a,s) (0) - -#endif /* __ASM_PPC_FLOPPY_H */ - -#define EXTRA_FLOPPY_PARAMS - -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/fs_pd.h b/include/asm-ppc/fs_pd.h deleted file mode 100644 index 8691327653af..000000000000 --- a/include/asm-ppc/fs_pd.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Platform information definitions. - * - * 2006 (c) MontaVista Software, Inc. - * Vitaly Bordug <vbordug@ru.mvista.com> - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#ifndef FS_PD_H -#define FS_PD_H - -static inline int uart_baudrate(void) -{ - int baud; - bd_t *bd = (bd_t *) __res; - - if (bd->bi_baudrate) - baud = bd->bi_baudrate; - else - baud = -1; - return baud; -} - -static inline int uart_clock(void) -{ - return (((bd_t *) __res)->bi_intfreq); -} - -#define cpm2_map(member) (&cpm2_immr->member) -#define cpm2_map_size(member, size) (&cpm2_immr->member) -#define cpm2_unmap(addr) do {} while(0) - -#endif diff --git a/include/asm-ppc/gg2.h b/include/asm-ppc/gg2.h deleted file mode 100644 index 341ae55b99fb..000000000000 --- a/include/asm-ppc/gg2.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * include/asm-ppc/gg2.h -- VLSI VAS96011/12 `Golden Gate 2' register definitions - * - * Copyright (C) 1997 Geert Uytterhoeven - * - * This file is based on the following documentation: - * - * The VAS96011/12 Chipset, Data Book, Edition 1.0 - * VLSI Technology, Inc. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -#ifndef _ASMPPC_GG2_H -#define _ASMPPC_GG2_H - - /* - * Memory Map (CHRP mode) - */ - -#define GG2_PCI_MEM_BASE 0xc0000000 /* Peripheral memory space */ -#define GG2_ISA_MEM_BASE 0xf7000000 /* Peripheral memory alias */ -#define GG2_ISA_IO_BASE 0xf8000000 /* Peripheral I/O space */ -#define GG2_PCI_CONFIG_BASE 0xfec00000 /* PCI configuration space */ -#define GG2_INT_ACK_SPECIAL 0xfec80000 /* Interrupt acknowledge and */ - /* special PCI cycles */ -#define GG2_ROM_BASE0 0xff000000 /* ROM bank 0 */ -#define GG2_ROM_BASE1 0xff800000 /* ROM bank 1 */ - - - /* - * GG2 specific PCI Registers - */ - -extern void __iomem *gg2_pci_config_base; /* kernel virtual address */ - -#define GG2_PCI_BUSNO 0x40 /* Bus number */ -#define GG2_PCI_SUBBUSNO 0x41 /* Subordinate bus number */ -#define GG2_PCI_DISCCTR 0x42 /* Disconnect counter */ -#define GG2_PCI_PPC_CTRL 0x50 /* PowerPC interface control register */ -#define GG2_PCI_ADDR_MAP 0x5c /* Address map */ -#define GG2_PCI_PCI_CTRL 0x60 /* PCI interface control register */ -#define GG2_PCI_ROM_CTRL 0x70 /* ROM interface control register */ -#define GG2_PCI_ROM_TIME 0x74 /* ROM timing */ -#define GG2_PCI_CC_CTRL 0x80 /* Cache controller control register */ -#define GG2_PCI_DRAM_BANK0 0x90 /* Control register for DRAM bank #0 */ -#define GG2_PCI_DRAM_BANK1 0x94 /* Control register for DRAM bank #1 */ -#define GG2_PCI_DRAM_BANK2 0x98 /* Control register for DRAM bank #2 */ -#define GG2_PCI_DRAM_BANK3 0x9c /* Control register for DRAM bank #3 */ -#define GG2_PCI_DRAM_BANK4 0xa0 /* Control register for DRAM bank #4 */ -#define GG2_PCI_DRAM_BANK5 0xa4 /* Control register for DRAM bank #5 */ -#define GG2_PCI_DRAM_TIME0 0xb0 /* Timing parameters set #0 */ -#define GG2_PCI_DRAM_TIME1 0xb4 /* Timing parameters set #1 */ -#define GG2_PCI_DRAM_CTRL 0xc0 /* DRAM control */ -#define GG2_PCI_ERR_CTRL 0xd0 /* Error control register */ -#define GG2_PCI_ERR_STATUS 0xd4 /* Error status register */ - /* Cleared when read */ - -#endif /* _ASMPPC_GG2_H */ diff --git a/include/asm-ppc/gt64260.h b/include/asm-ppc/gt64260.h deleted file mode 100644 index 9e63b3cfffca..000000000000 --- a/include/asm-ppc/gt64260.h +++ /dev/null @@ -1,322 +0,0 @@ -/* - * include/asm-ppc/gt64260.h - * - * Prototypes, etc. for the Marvell/Galileo GT64260 host bridge routines. - * - * Author: Mark A. Greer <mgreer@mvista.com> - * - * 2001 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASMPPC_GT64260_H -#define __ASMPPC_GT64260_H - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/slab.h> - -#include <asm/byteorder.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <asm/machdep.h> -#include <asm/pci-bridge.h> -#include <asm/gt64260_defs.h> - - -extern u32 gt64260_base; -extern u32 gt64260_irq_base; /* We handle the next 96 IRQs from here */ -extern u32 gt64260_revision; -extern u8 gt64260_pci_exclude_bridge; - -#ifndef TRUE -#define TRUE 1 -#endif - -#ifndef FALSE -#define FALSE 0 -#endif - -/* IRQs defined by the 64260 */ -#define GT64260_IRQ_MPSC0 40 -#define GT64260_IRQ_MPSC1 42 -#define GT64260_IRQ_SDMA 36 - -/* - * Define a default physical memory map to be set up on the bridge. - * Also define a struct to pass that info from board-specific routines to - * GT64260 generic set up routines. By passing this info in, the board - * support developer can modify it at will. - */ - -/* - * This is the default memory map: - * CPU PCI - * --- --- - * PCI 0 I/O: 0xfa000000-0xfaffffff 0x00000000-0x00ffffff - * PCI 1 I/O: 0xfb000000-0xfbffffff 0x01000000-0x01ffffff - * PCI 0 MEM: 0x80000000-0x8fffffff 0x80000000-0x8fffffff - * PCI 1 MEM: 0x90000000-0x9fffffff 0x90000000-0x9fffffff - */ - -/* Default physical memory map for the GT64260 bridge */ - -/* - * PCI Bus 0 Definitions - */ -#define GT64260_PCI_0_IO_SIZE 0x01000000U -#define GT64260_PCI_0_MEM_SIZE 0x10000000U - -/* Processor Physical addresses */ -#define GT64260_PCI_0_IO_START_PROC 0xfa000000U -#define GT64260_PCI_0_IO_END_PROC (GT64260_PCI_0_IO_START_PROC + \ - GT64260_PCI_0_IO_SIZE - 1) - -/* PCI 0 addresses */ -#define GT64260_PCI_0_IO_START 0x00000000U -#define GT64260_PCI_0_IO_END (GT64260_PCI_0_IO_START + \ - GT64260_PCI_0_IO_SIZE - 1) - -/* Processor Physical addresses */ -#define GT64260_PCI_0_MEM_START_PROC 0x80000000U -#define GT64260_PCI_0_MEM_END_PROC (GT64260_PCI_0_MEM_START_PROC + \ - GT64260_PCI_0_MEM_SIZE - 1) - -/* PCI 0 addresses */ -#define GT64260_PCI_0_MEM_START 0x80000000U -#define GT64260_PCI_0_MEM_END (GT64260_PCI_0_MEM_START + \ - GT64260_PCI_0_MEM_SIZE - 1) - -/* - * PCI Bus 1 Definitions - */ -#define GT64260_PCI_1_IO_SIZE 0x01000000U -#define GT64260_PCI_1_MEM_SIZE 0x10000000U - -/* PCI 1 addresses */ -#define GT64260_PCI_1_IO_START 0x01000000U -#define GT64260_PCI_1_IO_END (GT64260_PCI_1_IO_START + \ - GT64260_PCI_1_IO_SIZE - 1) - -/* Processor Physical addresses */ -#define GT64260_PCI_1_IO_START_PROC 0xfb000000U -#define GT64260_PCI_1_IO_END_PROC (GT64260_PCI_1_IO_START_PROC + \ - GT64260_PCI_1_IO_SIZE - 1) - -/* PCI 1 addresses */ -#define GT64260_PCI_1_MEM_START 0x90000000U -#define GT64260_PCI_1_MEM_END (GT64260_PCI_1_MEM_START + \ - GT64260_PCI_1_MEM_SIZE - 1) - -/* Processor Physical addresses */ -#define GT64260_PCI_1_MEM_START_PROC 0x90000000U -#define GT64260_PCI_1_MEM_END_PROC (GT64260_PCI_1_MEM_START_PROC + \ - GT64260_PCI_1_MEM_SIZE - 1) - -/* Define struct to pass mem-map info into gt64260_common.c code */ -typedef struct { - struct pci_controller *hose_a; - struct pci_controller *hose_b; - - u32 mem_size; - - u32 pci_0_io_start_proc; - u32 pci_0_io_start_pci; - u32 pci_0_io_size; - u32 pci_0_io_swap; - - u32 pci_0_mem_start_proc; - u32 pci_0_mem_start_pci_hi; - u32 pci_0_mem_start_pci_lo; - u32 pci_0_mem_size; - u32 pci_0_mem_swap; - - u32 pci_1_io_start_proc; - u32 pci_1_io_start_pci; - u32 pci_1_io_size; - u32 pci_1_io_swap; - - u32 pci_1_mem_start_proc; - u32 pci_1_mem_start_pci_hi; - u32 pci_1_mem_start_pci_lo; - u32 pci_1_mem_size; - u32 pci_1_mem_swap; -} gt64260_bridge_info_t; - -#define GT64260_BRIDGE_INFO_DEFAULT(ip, ms) { \ - (ip)->mem_size = (ms); \ - \ - (ip)->pci_0_io_start_proc = GT64260_PCI_0_IO_START_PROC; \ - (ip)->pci_0_io_start_pci = GT64260_PCI_0_IO_START; \ - (ip)->pci_0_io_size = GT64260_PCI_0_IO_SIZE; \ - (ip)->pci_0_io_swap = GT64260_CPU_PCI_SWAP_NONE; \ - \ - (ip)->pci_0_mem_start_proc = GT64260_PCI_0_MEM_START_PROC; \ - (ip)->pci_0_mem_start_pci_hi = 0x00000000; \ - (ip)->pci_0_mem_start_pci_lo = GT64260_PCI_0_MEM_START; \ - (ip)->pci_0_mem_size = GT64260_PCI_0_MEM_SIZE; \ - (ip)->pci_0_mem_swap = GT64260_CPU_PCI_SWAP_NONE; \ - \ - (ip)->pci_1_io_start_proc = GT64260_PCI_1_IO_START_PROC; \ - (ip)->pci_1_io_start_pci = GT64260_PCI_1_IO_START; \ - (ip)->pci_1_io_size = GT64260_PCI_1_IO_SIZE; \ - (ip)->pci_1_io_swap = GT64260_CPU_PCI_SWAP_NONE; \ - \ - (ip)->pci_1_mem_start_proc = GT64260_PCI_1_MEM_START_PROC; \ - (ip)->pci_1_mem_start_pci_hi = 0x00000000; \ - (ip)->pci_1_mem_start_pci_lo = GT64260_PCI_1_MEM_START; \ - (ip)->pci_1_mem_size = GT64260_PCI_1_MEM_SIZE; \ - (ip)->pci_1_mem_swap = GT64260_CPU_PCI_SWAP_NONE; \ -} - -/* - ***************************************************************************** - * - * I/O macros to access the 64260's registers - * - ***************************************************************************** - */ - -extern inline uint32_t gt_read(uint32_t offs){ - return (in_le32((volatile uint *)(gt64260_base + offs))); -} -extern inline void gt_write(uint32_t offs, uint32_t d){ - out_le32((volatile uint *)(gt64260_base + offs), d); -} - -#if 0 /* paranoid SMP version */ -extern inline void gt_modify(u32 offs, u32 data, u32 mask) \ -{ - uint32_t reg; - spin_lock(>64260_lock); - reg = gt_read(offs) & (~mask); /* zero any bits we care about*/ - reg |= data & mask; /* set bits from the data */ - gt_write(offs, reg); - spin_unlock(>64260_lock); -} -#else -extern inline void gt_modify(uint32_t offs, uint32_t data, uint32_t mask) -{ - uint32_t reg; - reg = gt_read(offs) & (~(mask)); /* zero any bits we care about*/ - reg |= (data) & (mask); /* set bits from the data */ - gt_write(offs, reg); -} -#endif -#define gt_set_bits(offs, bits) gt_modify(offs, ~0, bits) - -#define gt_clr_bits(offs, bits) gt_modify(offs, 0, bits) - - -/* - ***************************************************************************** - * - * Function Prototypes - * - ***************************************************************************** - */ - -int gt64260_find_bridges(u32 phys_base_addr, gt64260_bridge_info_t *info, - int ((*map_irq)(struct pci_dev *, unsigned char, unsigned char))); -int gt64260_bridge_init(gt64260_bridge_info_t *info); -int gt64260_cpu_scs_set_window(u32 window, - u32 base_addr, - u32 size); -int gt64260_cpu_cs_set_window(u32 window, - u32 base_addr, - u32 size); -int gt64260_cpu_boot_set_window(u32 base_addr, - u32 size); -int gt64260_cpu_set_pci_io_window(u32 pci_bus, - u32 cpu_base_addr, - u32 pci_base_addr, - u32 size, - u32 swap); -int gt64260_cpu_set_pci_mem_window(u32 pci_bus, - u32 window, - u32 cpu_base_addr, - u32 pci_base_addr_hi, - u32 pci_base_addr_lo, - u32 size, - u32 swap_64bit); -int gt64260_cpu_prot_set_window(u32 window, - u32 base_addr, - u32 size, - u32 access_bits); -int gt64260_cpu_snoop_set_window(u32 window, - u32 base_addr, - u32 size, - u32 snoop_type); -void gt64260_cpu_disable_all_windows(void); -int gt64260_pci_bar_enable(u32 pci_bus, u32 enable_bits); -int gt64260_pci_slave_scs_set_window(struct pci_controller *hose, - u32 window, - u32 pci_base_addr, - u32 cpu_base_addr, - u32 size); -int gt64260_pci_slave_cs_set_window(struct pci_controller *hose, - u32 window, - u32 pci_base_addr, - u32 cpu_base_addr, - u32 size); -int gt64260_pci_slave_boot_set_window(struct pci_controller *hose, - u32 pci_base_addr, - u32 cpu_base_addr, - u32 size); -int gt64260_pci_slave_p2p_mem_set_window(struct pci_controller *hose, - u32 window, - u32 pci_base_addr, - u32 other_bus_base_addr, - u32 size); -int gt64260_pci_slave_p2p_io_set_window(struct pci_controller *hose, - u32 pci_base_addr, - u32 other_bus_base_addr, - u32 size); -int gt64260_pci_slave_dac_scs_set_window(struct pci_controller *hose, - u32 window, - u32 pci_base_addr_hi, - u32 pci_base_addr_lo, - u32 cpu_base_addr, - u32 size); -int gt64260_pci_slave_dac_cs_set_window(struct pci_controller *hose, - u32 window, - u32 pci_base_addr_hi, - u32 pci_base_addr_lo, - u32 cpu_base_addr, - u32 size); -int gt64260_pci_slave_dac_boot_set_window(struct pci_controller *hose, - u32 pci_base_addr_hi, - u32 pci_base_addr_lo, - u32 cpu_base_addr, - u32 size); -int gt64260_pci_slave_dac_p2p_mem_set_window(struct pci_controller *hose, - u32 window, - u32 pci_base_addr_hi, - u32 pci_base_addr_lo, - u32 other_bus_base_addr, - u32 size); -int gt64260_pci_acc_cntl_set_window(u32 pci_bus, - u32 window, - u32 base_addr_hi, - u32 base_addr_lo, - u32 size, - u32 features); -int gt64260_pci_snoop_set_window(u32 pci_bus, - u32 window, - u32 base_addr_hi, - u32 base_addr_lo, - u32 size, - u32 snoop_type); -int gt64260_set_base(u32 new_base); -int gt64260_get_base(u32 *base); -int gt64260_pci_exclude_device(u8 bus, u8 devfn); - -void gt64260_init_irq(void); -int gt64260_get_irq(void); - -void gt64260_mpsc_progress(char *s, unsigned short hex); - -#endif /* __ASMPPC_GT64260_H */ diff --git a/include/asm-ppc/gt64260_defs.h b/include/asm-ppc/gt64260_defs.h deleted file mode 100644 index 6ffd01a5373e..000000000000 --- a/include/asm-ppc/gt64260_defs.h +++ /dev/null @@ -1,1010 +0,0 @@ -/* - * include/asm-ppc/gt64260_defs.h - * - * Register definitions for the Marvell/Galileo GT64260 host bridge. - * - * Author: Mark A. Greer <mgreer@mvista.com> - * - * 2001 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASMPPC_GT64260_DEFS_H -#define __ASMPPC_GT64260_DEFS_H - -/* - * Define a macro to represent the supported version of the 64260. - */ -#define GT64260 0x01 -#define GT64260A 0x10 - -/* - ***************************************************************************** - * - * CPU Interface Registers - * - ***************************************************************************** - */ - -/* CPU physical address of 64260's registers */ -#define GT64260_INTERNAL_SPACE_DECODE 0x0068 -#define GT64260_INTERNAL_SPACE_SIZE 0x10000 -#define GT64260_INTERNAL_SPACE_DEFAULT_ADDR 0x14000000 - -/* CPU Memory Controller Window Registers (4 windows) */ -#define GT64260_CPU_SCS_DECODE_WINDOWS 4 - -#define GT64260_CPU_SCS_DECODE_0_BOT 0x0008 -#define GT64260_CPU_SCS_DECODE_0_TOP 0x0010 -#define GT64260_CPU_SCS_DECODE_1_BOT 0x0208 -#define GT64260_CPU_SCS_DECODE_1_TOP 0x0210 -#define GT64260_CPU_SCS_DECODE_2_BOT 0x0018 -#define GT64260_CPU_SCS_DECODE_2_TOP 0x0020 -#define GT64260_CPU_SCS_DECODE_3_BOT 0x0218 -#define GT64260_CPU_SCS_DECODE_3_TOP 0x0220 - -/* CPU Device Controller Window Registers (4 windows) */ -#define GT64260_CPU_CS_DECODE_WINDOWS 4 - -#define GT64260_CPU_CS_DECODE_0_BOT 0x0028 -#define GT64260_CPU_CS_DECODE_0_TOP 0x0030 -#define GT64260_CPU_CS_DECODE_1_BOT 0x0228 -#define GT64260_CPU_CS_DECODE_1_TOP 0x0230 -#define GT64260_CPU_CS_DECODE_2_BOT 0x0248 -#define GT64260_CPU_CS_DECODE_2_TOP 0x0250 -#define GT64260_CPU_CS_DECODE_3_BOT 0x0038 -#define GT64260_CPU_CS_DECODE_3_TOP 0x0040 - -#define GT64260_CPU_BOOT_CS_DECODE_0_BOT 0x0238 -#define GT64260_CPU_BOOT_CS_DECODE_0_TOP 0x0240 - -/* CPU Windows to PCI space (2 PCI buses each w/ 1 I/O & 4 MEM windows) */ -#define GT64260_PCI_BUSES 2 -#define GT64260_PCI_IO_WINDOWS_PER_BUS 1 -#define GT64260_PCI_MEM_WINDOWS_PER_BUS 4 - -#define GT64260_CPU_PCI_SWAP_BYTE 0x00000000 -#define GT64260_CPU_PCI_SWAP_NONE 0x01000000 -#define GT64260_CPU_PCI_SWAP_BYTE_WORD 0x02000000 -#define GT64260_CPU_PCI_SWAP_WORD 0x03000000 -#define GT64260_CPU_PCI_SWAP_MASK 0x07000000 - -#define GT64260_CPU_PCI_MEM_REQ64 (1<<27) - -#define GT64260_CPU_PCI_0_IO_DECODE_BOT 0x0048 -#define GT64260_CPU_PCI_0_IO_DECODE_TOP 0x0050 -#define GT64260_CPU_PCI_0_MEM_0_DECODE_BOT 0x0058 -#define GT64260_CPU_PCI_0_MEM_0_DECODE_TOP 0x0060 -#define GT64260_CPU_PCI_0_MEM_1_DECODE_BOT 0x0080 -#define GT64260_CPU_PCI_0_MEM_1_DECODE_TOP 0x0088 -#define GT64260_CPU_PCI_0_MEM_2_DECODE_BOT 0x0258 -#define GT64260_CPU_PCI_0_MEM_2_DECODE_TOP 0x0260 -#define GT64260_CPU_PCI_0_MEM_3_DECODE_BOT 0x0280 -#define GT64260_CPU_PCI_0_MEM_3_DECODE_TOP 0x0288 - -#define GT64260_CPU_PCI_0_IO_REMAP 0x00f0 -#define GT64260_CPU_PCI_0_MEM_0_REMAP_LO 0x00f8 -#define GT64260_CPU_PCI_0_MEM_0_REMAP_HI 0x0320 -#define GT64260_CPU_PCI_0_MEM_1_REMAP_LO 0x0100 -#define GT64260_CPU_PCI_0_MEM_1_REMAP_HI 0x0328 -#define GT64260_CPU_PCI_0_MEM_2_REMAP_LO 0x02f8 -#define GT64260_CPU_PCI_0_MEM_2_REMAP_HI 0x0330 -#define GT64260_CPU_PCI_0_MEM_3_REMAP_LO 0x0300 -#define GT64260_CPU_PCI_0_MEM_3_REMAP_HI 0x0338 - -#define GT64260_CPU_PCI_1_IO_DECODE_BOT 0x0090 -#define GT64260_CPU_PCI_1_IO_DECODE_TOP 0x0098 -#define GT64260_CPU_PCI_1_MEM_0_DECODE_BOT 0x00a0 -#define GT64260_CPU_PCI_1_MEM_0_DECODE_TOP 0x00a8 -#define GT64260_CPU_PCI_1_MEM_1_DECODE_BOT 0x00b0 -#define GT64260_CPU_PCI_1_MEM_1_DECODE_TOP 0x00b8 -#define GT64260_CPU_PCI_1_MEM_2_DECODE_BOT 0x02a0 -#define GT64260_CPU_PCI_1_MEM_2_DECODE_TOP 0x02a8 -#define GT64260_CPU_PCI_1_MEM_3_DECODE_BOT 0x02b0 -#define GT64260_CPU_PCI_1_MEM_3_DECODE_TOP 0x02b8 - -#define GT64260_CPU_PCI_1_IO_REMAP 0x0108 -#define GT64260_CPU_PCI_1_MEM_0_REMAP_LO 0x0110 -#define GT64260_CPU_PCI_1_MEM_0_REMAP_HI 0x0340 -#define GT64260_CPU_PCI_1_MEM_1_REMAP_LO 0x0118 -#define GT64260_CPU_PCI_1_MEM_1_REMAP_HI 0x0348 -#define GT64260_CPU_PCI_1_MEM_2_REMAP_LO 0x0310 -#define GT64260_CPU_PCI_1_MEM_2_REMAP_HI 0x0350 -#define GT64260_CPU_PCI_1_MEM_3_REMAP_LO 0x0318 -#define GT64260_CPU_PCI_1_MEM_3_REMAP_HI 0x0358 - -/* CPU Control Registers */ -#define GT64260_CPU_CONFIG 0x0000 -#define GT64260_CPU_MODE 0x0120 -#define GT64260_CPU_MASTER_CNTL 0x0160 -#define GT64260_CPU_XBAR_CNTL_LO 0x0150 -#define GT64260_CPU_XBAR_CNTL_HI 0x0158 -#define GT64260_CPU_XBAR_TO 0x0168 -#define GT64260_CPU_RR_XBAR_CNTL_LO 0x0170 -#define GT64260_CPU_RR_XBAR_CNTL_HI 0x0178 - -/* CPU Sync Barrier Registers */ -#define GT64260_CPU_SYNC_BARRIER_PCI_0 0x00c0 -#define GT64260_CPU_SYNC_BARRIER_PCI_1 0x00c8 - -/* CPU Access Protection Registers */ -#define GT64260_CPU_PROT_WINDOWS 8 - -#define GT64260_CPU_PROT_ACCPROTECT (1<<16) -#define GT64260_CPU_PROT_WRPROTECT (1<<17) -#define GT64260_CPU_PROT_CACHEPROTECT (1<<18) - -#define GT64260_CPU_PROT_BASE_0 0x0180 -#define GT64260_CPU_PROT_TOP_0 0x0188 -#define GT64260_CPU_PROT_BASE_1 0x0190 -#define GT64260_CPU_PROT_TOP_1 0x0198 -#define GT64260_CPU_PROT_BASE_2 0x01a0 -#define GT64260_CPU_PROT_TOP_2 0x01a8 -#define GT64260_CPU_PROT_BASE_3 0x01b0 -#define GT64260_CPU_PROT_TOP_3 0x01b8 -#define GT64260_CPU_PROT_BASE_4 0x01c0 -#define GT64260_CPU_PROT_TOP_4 0x01c8 -#define GT64260_CPU_PROT_BASE_5 0x01d0 -#define GT64260_CPU_PROT_TOP_5 0x01d8 -#define GT64260_CPU_PROT_BASE_6 0x01e0 -#define GT64260_CPU_PROT_TOP_6 0x01e8 -#define GT64260_CPU_PROT_BASE_7 0x01f0 -#define GT64260_CPU_PROT_TOP_7 0x01f8 - -/* CPU Snoop Control Registers */ -#define GT64260_CPU_SNOOP_WINDOWS 4 - -#define GT64260_CPU_SNOOP_NONE 0x00000000 -#define GT64260_CPU_SNOOP_WT 0x00010000 -#define GT64260_CPU_SNOOP_WB 0x00020000 -#define GT64260_CPU_SNOOP_MASK 0x00030000 -#define GT64260_CPU_SNOOP_ALL_BITS GT64260_CPU_SNOOP_MASK - -#define GT64260_CPU_SNOOP_BASE_0 0x0380 -#define GT64260_CPU_SNOOP_TOP_0 0x0388 -#define GT64260_CPU_SNOOP_BASE_1 0x0390 -#define GT64260_CPU_SNOOP_TOP_1 0x0398 -#define GT64260_CPU_SNOOP_BASE_2 0x03a0 -#define GT64260_CPU_SNOOP_TOP_2 0x03a8 -#define GT64260_CPU_SNOOP_BASE_3 0x03b0 -#define GT64260_CPU_SNOOP_TOP_3 0x03b8 - -/* CPU Error Report Registers */ -#define GT64260_CPU_ERR_ADDR_LO 0x0070 -#define GT64260_CPU_ERR_ADDR_HI 0x0078 -#define GT64260_CPU_ERR_DATA_LO 0x0128 -#define GT64260_CPU_ERR_DATA_HI 0x0130 -#define GT64260_CPU_ERR_PARITY 0x0138 -#define GT64260_CPU_ERR_CAUSE 0x0140 -#define GT64260_CPU_ERR_MASK 0x0148 - - -/* - ***************************************************************************** - * - * SDRAM Cotnroller Registers - * - ***************************************************************************** - */ - -/* SDRAM Config Registers */ -#define GT64260_SDRAM_CONFIG 0x0448 -#define GT64260_SDRAM_OPERATION_MODE 0x0474 -#define GT64260_SDRAM_ADDR_CNTL 0x047c -#define GT64260_SDRAM_TIMING_PARAMS 0x04b4 -#define GT64260_SDRAM_UMA_CNTL 0x04a4 -#define GT64260_SDRAM_XBAR_CNTL_LO 0x04a8 -#define GT64260_SDRAM_XBAR_CNTL_HI 0x04ac -#define GT64260_SDRAM_XBAR_CNTL_TO 0x04b0 - -/* SDRAM Banks Parameters Registers */ -#define GT64260_SDRAM_BANK_PARAMS_0 0x044c -#define GT64260_SDRAM_BANK_PARAMS_1 0x0450 -#define GT64260_SDRAM_BANK_PARAMS_2 0x0454 -#define GT64260_SDRAM_BANK_PARAMS_3 0x0458 - -/* SDRAM Error Report Registers */ -#define GT64260_SDRAM_ERR_DATA_LO 0x0484 -#define GT64260_SDRAM_ERR_DATA_HI 0x0480 -#define GT64260_SDRAM_ERR_ADDR 0x0490 -#define GT64260_SDRAM_ERR_ECC_RCVD 0x0488 -#define GT64260_SDRAM_ERR_ECC_CALC 0x048c -#define GT64260_SDRAM_ERR_ECC_CNTL 0x0494 -#define GT64260_SDRAM_ERR_ECC_ERR_CNT 0x0498 - - -/* - ***************************************************************************** - * - * Device/BOOT Cotnroller Registers - * - ***************************************************************************** - */ - -/* Device Control Registers */ -#define GT64260_DEV_BANK_PARAMS_0 0x045c -#define GT64260_DEV_BANK_PARAMS_1 0x0460 -#define GT64260_DEV_BANK_PARAMS_2 0x0464 -#define GT64260_DEV_BANK_PARAMS_3 0x0468 -#define GT64260_DEV_BOOT_PARAMS 0x046c -#define GT64260_DEV_IF_CNTL 0x04c0 -#define GT64260_DEV_IF_XBAR_CNTL_LO 0x04c8 -#define GT64260_DEV_IF_XBAR_CNTL_HI 0x04cc -#define GT64260_DEV_IF_XBAR_CNTL_TO 0x04c4 - -/* Device Interrupt Registers */ -#define GT64260_DEV_INTR_CAUSE 0x04d0 -#define GT64260_DEV_INTR_MASK 0x04d4 -#define GT64260_DEV_INTR_ERR_ADDR 0x04d8 - - -/* - ***************************************************************************** - * - * PCI Bridge Interface Registers - * - ***************************************************************************** - */ - -/* PCI Configuration Access Registers */ -#define GT64260_PCI_0_CONFIG_ADDR 0x0cf8 -#define GT64260_PCI_0_CONFIG_DATA 0x0cfc -#define GT64260_PCI_0_IACK 0x0c34 - -#define GT64260_PCI_1_CONFIG_ADDR 0x0c78 -#define GT64260_PCI_1_CONFIG_DATA 0x0c7c -#define GT64260_PCI_1_IACK 0x0cb4 - -/* PCI Control Registers */ -#define GT64260_PCI_0_CMD 0x0c00 -#define GT64260_PCI_0_MODE 0x0d00 -#define GT64260_PCI_0_TO_RETRY 0x0c04 -#define GT64260_PCI_0_RD_BUF_DISCARD_TIMER 0x0d04 -#define GT64260_PCI_0_MSI_TRIGGER_TIMER 0x0c38 -#define GT64260_PCI_0_ARBITER_CNTL 0x1d00 -#define GT64260_PCI_0_XBAR_CNTL_LO 0x1d08 -#define GT64260_PCI_0_XBAR_CNTL_HI 0x1d0c -#define GT64260_PCI_0_XBAR_CNTL_TO 0x1d04 -#define GT64260_PCI_0_RD_RESP_XBAR_CNTL_LO 0x1d18 -#define GT64260_PCI_0_RD_RESP_XBAR_CNTL_HI 0x1d1c -#define GT64260_PCI_0_SYNC_BARRIER 0x1d10 -#define GT64260_PCI_0_P2P_CONFIG 0x1d14 -#define GT64260_PCI_0_P2P_SWAP_CNTL 0x1d54 - -#define GT64260_PCI_1_CMD 0x0c80 -#define GT64260_PCI_1_MODE 0x0d80 -#define GT64260_PCI_1_TO_RETRY 0x0c84 -#define GT64260_PCI_1_RD_BUF_DISCARD_TIMER 0x0d84 -#define GT64260_PCI_1_MSI_TRIGGER_TIMER 0x0cb8 -#define GT64260_PCI_1_ARBITER_CNTL 0x1d80 -#define GT64260_PCI_1_XBAR_CNTL_LO 0x1d88 -#define GT64260_PCI_1_XBAR_CNTL_HI 0x1d8c -#define GT64260_PCI_1_XBAR_CNTL_TO 0x1d84 -#define GT64260_PCI_1_RD_RESP_XBAR_CNTL_LO 0x1d98 -#define GT64260_PCI_1_RD_RESP_XBAR_CNTL_HI 0x1d9c -#define GT64260_PCI_1_SYNC_BARRIER 0x1d90 -#define GT64260_PCI_1_P2P_CONFIG 0x1d94 -#define GT64260_PCI_1_P2P_SWAP_CNTL 0x1dd4 - -/* PCI Access Control Regions Registers */ -#define GT64260_PCI_ACC_CNTL_WINDOWS 8 - -#define GT64260_PCI_ACC_CNTL_PREFETCHEN (1<<12) -#define GT64260_PCI_ACC_CNTL_DREADEN (1<<13) -#define GT64260_PCI_ACC_CNTL_RDPREFETCH (1<<16) -#define GT64260_PCI_ACC_CNTL_RDLINEPREFETCH (1<<17) -#define GT64260_PCI_ACC_CNTL_RDMULPREFETCH (1<<18) -#define GT64260_PCI_ACC_CNTL_MBURST_4_WORDS 0x00000000 -#define GT64260_PCI_ACC_CNTL_MBURST_8_WORDS 0x00100000 -#define GT64260_PCI_ACC_CNTL_MBURST_16_WORDS 0x00200000 -#define GT64260_PCI_ACC_CNTL_MBURST_MASK 0x00300000 -#define GT64260_PCI_ACC_CNTL_SWAP_BYTE 0x00000000 -#define GT64260_PCI_ACC_CNTL_SWAP_NONE 0x01000000 -#define GT64260_PCI_ACC_CNTL_SWAP_BYTE_WORD 0x02000000 -#define GT64260_PCI_ACC_CNTL_SWAP_WORD 0x03000000 -#define GT64260_PCI_ACC_CNTL_SWAP_MASK 0x03000000 -#define GT64260_PCI_ACC_CNTL_ACCPROT (1<<28) -#define GT64260_PCI_ACC_CNTL_WRPROT (1<<29) - -#define GT64260_PCI_ACC_CNTL_ALL_BITS (GT64260_PCI_ACC_CNTL_PREFETCHEN | \ - GT64260_PCI_ACC_CNTL_DREADEN | \ - GT64260_PCI_ACC_CNTL_RDPREFETCH | \ - GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |\ - GT64260_PCI_ACC_CNTL_RDMULPREFETCH | \ - GT64260_PCI_ACC_CNTL_MBURST_MASK | \ - GT64260_PCI_ACC_CNTL_SWAP_MASK | \ - GT64260_PCI_ACC_CNTL_ACCPROT| \ - GT64260_PCI_ACC_CNTL_WRPROT) - -#define GT64260_PCI_0_ACC_CNTL_0_BASE_LO 0x1e00 -#define GT64260_PCI_0_ACC_CNTL_0_BASE_HI 0x1e04 -#define GT64260_PCI_0_ACC_CNTL_0_TOP 0x1e08 -#define GT64260_PCI_0_ACC_CNTL_1_BASE_LO 0x1e10 -#define GT64260_PCI_0_ACC_CNTL_1_BASE_HI 0x1e14 -#define GT64260_PCI_0_ACC_CNTL_1_TOP 0x1e18 -#define GT64260_PCI_0_ACC_CNTL_2_BASE_LO 0x1e20 -#define GT64260_PCI_0_ACC_CNTL_2_BASE_HI 0x1e24 -#define GT64260_PCI_0_ACC_CNTL_2_TOP 0x1e28 -#define GT64260_PCI_0_ACC_CNTL_3_BASE_LO 0x1e30 -#define GT64260_PCI_0_ACC_CNTL_3_BASE_HI 0x1e34 -#define GT64260_PCI_0_ACC_CNTL_3_TOP 0x1e38 -#define GT64260_PCI_0_ACC_CNTL_4_BASE_LO 0x1e40 -#define GT64260_PCI_0_ACC_CNTL_4_BASE_HI 0x1e44 -#define GT64260_PCI_0_ACC_CNTL_4_TOP 0x1e48 -#define GT64260_PCI_0_ACC_CNTL_5_BASE_LO 0x1e50 -#define GT64260_PCI_0_ACC_CNTL_5_BASE_HI 0x1e54 -#define GT64260_PCI_0_ACC_CNTL_5_TOP 0x1e58 -#define GT64260_PCI_0_ACC_CNTL_6_BASE_LO 0x1e60 -#define GT64260_PCI_0_ACC_CNTL_6_BASE_HI 0x1e64 -#define GT64260_PCI_0_ACC_CNTL_6_TOP 0x1e68 -#define GT64260_PCI_0_ACC_CNTL_7_BASE_LO 0x1e70 -#define GT64260_PCI_0_ACC_CNTL_7_BASE_HI 0x1e74 -#define GT64260_PCI_0_ACC_CNTL_7_TOP 0x1e78 - -#define GT64260_PCI_1_ACC_CNTL_0_BASE_LO 0x1e80 -#define GT64260_PCI_1_ACC_CNTL_0_BASE_HI 0x1e84 -#define GT64260_PCI_1_ACC_CNTL_0_TOP 0x1e88 -#define GT64260_PCI_1_ACC_CNTL_1_BASE_LO 0x1e90 -#define GT64260_PCI_1_ACC_CNTL_1_BASE_HI 0x1e94 -#define GT64260_PCI_1_ACC_CNTL_1_TOP 0x1e98 -#define GT64260_PCI_1_ACC_CNTL_2_BASE_LO 0x1ea0 -#define GT64260_PCI_1_ACC_CNTL_2_BASE_HI 0x1ea4 -#define GT64260_PCI_1_ACC_CNTL_2_TOP 0x1ea8 -#define GT64260_PCI_1_ACC_CNTL_3_BASE_LO 0x1eb0 -#define GT64260_PCI_1_ACC_CNTL_3_BASE_HI 0x1eb4 -#define GT64260_PCI_1_ACC_CNTL_3_TOP 0x1eb8 -#define GT64260_PCI_1_ACC_CNTL_4_BASE_LO 0x1ec0 -#define GT64260_PCI_1_ACC_CNTL_4_BASE_HI 0x1ec4 -#define GT64260_PCI_1_ACC_CNTL_4_TOP 0x1ec8 -#define GT64260_PCI_1_ACC_CNTL_5_BASE_LO 0x1ed0 -#define GT64260_PCI_1_ACC_CNTL_5_BASE_HI 0x1ed4 -#define GT64260_PCI_1_ACC_CNTL_5_TOP 0x1ed8 -#define GT64260_PCI_1_ACC_CNTL_6_BASE_LO 0x1ee0 -#define GT64260_PCI_1_ACC_CNTL_6_BASE_HI 0x1ee4 -#define GT64260_PCI_1_ACC_CNTL_6_TOP 0x1ee8 -#define GT64260_PCI_1_ACC_CNTL_7_BASE_LO 0x1ef0 -#define GT64260_PCI_1_ACC_CNTL_7_BASE_HI 0x1ef4 -#define GT64260_PCI_1_ACC_CNTL_7_TOP 0x1ef8 - -/* PCI Snoop Control Registers */ -#define GT64260_PCI_SNOOP_WINDOWS 4 - -#define GT64260_PCI_SNOOP_NONE 0x00000000 -#define GT64260_PCI_SNOOP_WT 0x00001000 -#define GT64260_PCI_SNOOP_WB 0x00002000 - -#define GT64260_PCI_0_SNOOP_0_BASE_LO 0x1f00 -#define GT64260_PCI_0_SNOOP_0_BASE_HI 0x1f04 -#define GT64260_PCI_0_SNOOP_0_TOP 0x1f08 -#define GT64260_PCI_0_SNOOP_1_BASE_LO 0x1f10 -#define GT64260_PCI_0_SNOOP_1_BASE_HI 0x1f14 -#define GT64260_PCI_0_SNOOP_1_TOP 0x1f18 -#define GT64260_PCI_0_SNOOP_2_BASE_LO 0x1f20 -#define GT64260_PCI_0_SNOOP_2_BASE_HI 0x1f24 -#define GT64260_PCI_0_SNOOP_2_TOP 0x1f28 -#define GT64260_PCI_0_SNOOP_3_BASE_LO 0x1f30 -#define GT64260_PCI_0_SNOOP_3_BASE_HI 0x1f34 -#define GT64260_PCI_0_SNOOP_3_TOP 0x1f38 - -#define GT64260_PCI_1_SNOOP_0_BASE_LO 0x1f80 -#define GT64260_PCI_1_SNOOP_0_BASE_HI 0x1f84 -#define GT64260_PCI_1_SNOOP_0_TOP 0x1f88 -#define GT64260_PCI_1_SNOOP_1_BASE_LO 0x1f90 -#define GT64260_PCI_1_SNOOP_1_BASE_HI 0x1f94 -#define GT64260_PCI_1_SNOOP_1_TOP 0x1f98 -#define GT64260_PCI_1_SNOOP_2_BASE_LO 0x1fa0 -#define GT64260_PCI_1_SNOOP_2_BASE_HI 0x1fa4 -#define GT64260_PCI_1_SNOOP_2_TOP 0x1fa8 -#define GT64260_PCI_1_SNOOP_3_BASE_LO 0x1fb0 -#define GT64260_PCI_1_SNOOP_3_BASE_HI 0x1fb4 -#define GT64260_PCI_1_SNOOP_3_TOP 0x1fb8 - -/* PCI Error Report Registers */ -#define GT64260_PCI_0_ERR_SERR_MASK 0x0c28 -#define GT64260_PCI_0_ERR_ADDR_LO 0x1d40 -#define GT64260_PCI_0_ERR_ADDR_HI 0x1d44 -#define GT64260_PCI_0_ERR_DATA_LO 0x1d48 -#define GT64260_PCI_0_ERR_DATA_HI 0x1d4c -#define GT64260_PCI_0_ERR_CMD 0x1d50 -#define GT64260_PCI_0_ERR_CAUSE 0x1d58 -#define GT64260_PCI_0_ERR_MASK 0x1d5c - -#define GT64260_PCI_1_ERR_SERR_MASK 0x0ca8 -#define GT64260_PCI_1_ERR_ADDR_LO 0x1dc0 -#define GT64260_PCI_1_ERR_ADDR_HI 0x1dc4 -#define GT64260_PCI_1_ERR_DATA_LO 0x1dc8 -#define GT64260_PCI_1_ERR_DATA_HI 0x1dcc -#define GT64260_PCI_1_ERR_CMD 0x1dd0 -#define GT64260_PCI_1_ERR_CAUSE 0x1dd8 -#define GT64260_PCI_1_ERR_MASK 0x1ddc - -/* PCI Slave Address Decoding Registers */ -#define GT64260_PCI_SCS_WINDOWS 4 -#define GT64260_PCI_CS_WINDOWS 4 -#define GT64260_PCI_BOOT_WINDOWS 1 -#define GT64260_PCI_P2P_MEM_WINDOWS 2 -#define GT64260_PCI_P2P_IO_WINDOWS 1 -#define GT64260_PCI_DAC_SCS_WINDOWS 4 -#define GT64260_PCI_DAC_CS_WINDOWS 4 -#define GT64260_PCI_DAC_BOOT_WINDOWS 1 -#define GT64260_PCI_DAC_P2P_MEM_WINDOWS 2 - -#define GT64260_PCI_0_SLAVE_SCS_0_SIZE 0x0c08 -#define GT64260_PCI_0_SLAVE_SCS_1_SIZE 0x0d08 -#define GT64260_PCI_0_SLAVE_SCS_2_SIZE 0x0c0c -#define GT64260_PCI_0_SLAVE_SCS_3_SIZE 0x0d0c -#define GT64260_PCI_0_SLAVE_CS_0_SIZE 0x0c10 -#define GT64260_PCI_0_SLAVE_CS_1_SIZE 0x0d10 -#define GT64260_PCI_0_SLAVE_CS_2_SIZE 0x0d18 -#define GT64260_PCI_0_SLAVE_CS_3_SIZE 0x0c14 -#define GT64260_PCI_0_SLAVE_BOOT_SIZE 0x0d14 -#define GT64260_PCI_0_SLAVE_P2P_MEM_0_SIZE 0x0d1c -#define GT64260_PCI_0_SLAVE_P2P_MEM_1_SIZE 0x0d20 -#define GT64260_PCI_0_SLAVE_P2P_IO_SIZE 0x0d24 -#define GT64260_PCI_0_SLAVE_CPU_SIZE 0x0d28 - -#define GT64260_PCI_0_SLAVE_DAC_SCS_0_SIZE 0x0e00 -#define GT64260_PCI_0_SLAVE_DAC_SCS_1_SIZE 0x0e04 -#define GT64260_PCI_0_SLAVE_DAC_SCS_2_SIZE 0x0e08 -#define GT64260_PCI_0_SLAVE_DAC_SCS_3_SIZE 0x0e0c -#define GT64260_PCI_0_SLAVE_DAC_CS_0_SIZE 0x0e10 -#define GT64260_PCI_0_SLAVE_DAC_CS_1_SIZE 0x0e14 -#define GT64260_PCI_0_SLAVE_DAC_CS_2_SIZE 0x0e18 -#define GT64260_PCI_0_SLAVE_DAC_CS_3_SIZE 0x0e1c -#define GT64260_PCI_0_SLAVE_DAC_BOOT_SIZE 0x0e20 -#define GT64260_PCI_0_SLAVE_DAC_P2P_MEM_0_SIZE 0x0e24 -#define GT64260_PCI_0_SLAVE_DAC_P2P_MEM_1_SIZE 0x0e28 -#define GT64260_PCI_0_SLAVE_DAC_CPU_SIZE 0x0e2c - -#define GT64260_PCI_0_SLAVE_EXP_ROM_SIZE 0x0d2c - -#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_SCS_0 (1<<0) -#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_SCS_1 (1<<1) -#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_SCS_2 (1<<2) -#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_SCS_3 (1<<3) -#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_CS_0 (1<<4) -#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_CS_1 (1<<5) -#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_CS_2 (1<<6) -#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_CS_3 (1<<7) -#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_BOOT (1<<8) -#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_REG_MEM (1<<9) -#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_REG_IO (1<<10) -#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_P2P_MEM_0 (1<<11) -#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_P2P_MEM_1 (1<<12) -#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_P2P_IO (1<<13) -#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_CPU (1<<14) -#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_SCS_0 (1<<15) -#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_SCS_1 (1<<16) -#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_SCS_2 (1<<17) -#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_SCS_3 (1<<18) -#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_CS_0 (1<<19) -#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_CS_1 (1<<20) -#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_CS_2 (1<<21) -#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_CS_3 (1<<22) -#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_BOOT (1<<23) -#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_P2P_MEM_0 (1<<24) -#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_P2P_MEM_1 (1<<25) -#define GT64260_PCI_SLAVE_BAR_REG_ENABLES_DAC_CPU (1<<26) - -#define GT64260_PCI_0_SLAVE_BAR_REG_ENABLES 0x0c3c -#define GT64260_PCI_0_SLAVE_SCS_0_REMAP 0x0c48 -#define GT64260_PCI_0_SLAVE_SCS_1_REMAP 0x0d48 -#define GT64260_PCI_0_SLAVE_SCS_2_REMAP 0x0c4c -#define GT64260_PCI_0_SLAVE_SCS_3_REMAP 0x0d4c -#define GT64260_PCI_0_SLAVE_CS_0_REMAP 0x0c50 -#define GT64260_PCI_0_SLAVE_CS_1_REMAP 0x0d50 -#define GT64260_PCI_0_SLAVE_CS_2_REMAP 0x0d58 -#define GT64260_PCI_0_SLAVE_CS_3_REMAP 0x0c54 -#define GT64260_PCI_0_SLAVE_BOOT_REMAP 0x0d54 -#define GT64260_PCI_0_SLAVE_P2P_MEM_0_REMAP_LO 0x0d5c -#define GT64260_PCI_0_SLAVE_P2P_MEM_0_REMAP_HI 0x0d60 -#define GT64260_PCI_0_SLAVE_P2P_MEM_1_REMAP_LO 0x0d64 -#define GT64260_PCI_0_SLAVE_P2P_MEM_1_REMAP_HI 0x0d68 -#define GT64260_PCI_0_SLAVE_P2P_IO_REMAP 0x0d6c -#define GT64260_PCI_0_SLAVE_CPU_REMAP 0x0d70 - -#define GT64260_PCI_0_SLAVE_DAC_SCS_0_REMAP 0x0f00 -#define GT64260_PCI_0_SLAVE_DAC_SCS_1_REMAP 0x0f04 -#define GT64260_PCI_0_SLAVE_DAC_SCS_2_REMAP 0x0f08 -#define GT64260_PCI_0_SLAVE_DAC_SCS_3_REMAP 0x0f0c -#define GT64260_PCI_0_SLAVE_DAC_CS_0_REMAP 0x0f10 -#define GT64260_PCI_0_SLAVE_DAC_CS_1_REMAP 0x0f14 -#define GT64260_PCI_0_SLAVE_DAC_CS_2_REMAP 0x0f18 -#define GT64260_PCI_0_SLAVE_DAC_CS_3_REMAP 0x0f1c -#define GT64260_PCI_0_SLAVE_DAC_BOOT_REMAP 0x0f20 -#define GT64260_PCI_0_SLAVE_DAC_P2P_MEM_0_REMAP_LO 0x0f24 -#define GT64260_PCI_0_SLAVE_DAC_P2P_MEM_0_REMAP_HI 0x0f28 -#define GT64260_PCI_0_SLAVE_DAC_P2P_MEM_1_REMAP_LO 0x0f2c -#define GT64260_PCI_0_SLAVE_DAC_P2P_MEM_1_REMAP_HI 0x0f30 -#define GT64260_PCI_0_SLAVE_DAC_CPU_REMAP 0x0f34 - -#define GT64260_PCI_0_SLAVE_EXP_ROM_REMAP 0x0f38 -#define GT64260_PCI_0_SLAVE_PCI_DECODE_CNTL 0x0d3c - -#define GT64260_PCI_1_SLAVE_SCS_0_SIZE 0x0c88 -#define GT64260_PCI_1_SLAVE_SCS_1_SIZE 0x0d88 -#define GT64260_PCI_1_SLAVE_SCS_2_SIZE 0x0c8c -#define GT64260_PCI_1_SLAVE_SCS_3_SIZE 0x0d8c -#define GT64260_PCI_1_SLAVE_CS_0_SIZE 0x0c90 -#define GT64260_PCI_1_SLAVE_CS_1_SIZE 0x0d90 -#define GT64260_PCI_1_SLAVE_CS_2_SIZE 0x0d98 -#define GT64260_PCI_1_SLAVE_CS_3_SIZE 0x0c94 -#define GT64260_PCI_1_SLAVE_BOOT_SIZE 0x0d94 -#define GT64260_PCI_1_SLAVE_P2P_MEM_0_SIZE 0x0d9c -#define GT64260_PCI_1_SLAVE_P2P_MEM_1_SIZE 0x0da0 -#define GT64260_PCI_1_SLAVE_P2P_IO_SIZE 0x0da4 -#define GT64260_PCI_1_SLAVE_CPU_SIZE 0x0da8 - -#define GT64260_PCI_1_SLAVE_DAC_SCS_0_SIZE 0x0e80 -#define GT64260_PCI_1_SLAVE_DAC_SCS_1_SIZE 0x0e84 -#define GT64260_PCI_1_SLAVE_DAC_SCS_2_SIZE 0x0e88 -#define GT64260_PCI_1_SLAVE_DAC_SCS_3_SIZE 0x0e8c -#define GT64260_PCI_1_SLAVE_DAC_CS_0_SIZE 0x0e90 -#define GT64260_PCI_1_SLAVE_DAC_CS_1_SIZE 0x0e94 -#define GT64260_PCI_1_SLAVE_DAC_CS_2_SIZE 0x0e98 -#define GT64260_PCI_1_SLAVE_DAC_CS_3_SIZE 0x0e9c -#define GT64260_PCI_1_SLAVE_DAC_BOOT_SIZE 0x0ea0 -#define GT64260_PCI_1_SLAVE_DAC_P2P_MEM_0_SIZE 0x0ea4 -#define GT64260_PCI_1_SLAVE_DAC_P2P_MEM_1_SIZE 0x0ea8 -#define GT64260_PCI_1_SLAVE_DAC_CPU_SIZE 0x0eac - -#define GT64260_PCI_1_SLAVE_EXP_ROM_SIZE 0x0dac - -#define GT64260_PCI_1_SLAVE_BAR_REG_ENABLES 0x0cbc -#define GT64260_PCI_1_SLAVE_SCS_0_REMAP 0x0cc8 -#define GT64260_PCI_1_SLAVE_SCS_1_REMAP 0x0dc8 -#define GT64260_PCI_1_SLAVE_SCS_2_REMAP 0x0ccc -#define GT64260_PCI_1_SLAVE_SCS_3_REMAP 0x0dcc -#define GT64260_PCI_1_SLAVE_CS_0_REMAP 0x0cd0 -#define GT64260_PCI_1_SLAVE_CS_1_REMAP 0x0dd0 -#define GT64260_PCI_1_SLAVE_CS_2_REMAP 0x0dd8 -#define GT64260_PCI_1_SLAVE_CS_3_REMAP 0x0cd4 -#define GT64260_PCI_1_SLAVE_BOOT_REMAP 0x0dd4 -#define GT64260_PCI_1_SLAVE_P2P_MEM_0_REMAP_LO 0x0ddc -#define GT64260_PCI_1_SLAVE_P2P_MEM_0_REMAP_HI 0x0de0 -#define GT64260_PCI_1_SLAVE_P2P_MEM_1_REMAP_LO 0x0de4 -#define GT64260_PCI_1_SLAVE_P2P_MEM_1_REMAP_HI 0x0de8 -#define GT64260_PCI_1_SLAVE_P2P_IO_REMAP 0x0dec -#define GT64260_PCI_1_SLAVE_CPU_REMAP 0x0df0 - -#define GT64260_PCI_1_SLAVE_DAC_SCS_0_REMAP 0x0f80 -#define GT64260_PCI_1_SLAVE_DAC_SCS_1_REMAP 0x0f84 -#define GT64260_PCI_1_SLAVE_DAC_SCS_2_REMAP 0x0f88 -#define GT64260_PCI_1_SLAVE_DAC_SCS_3_REMAP 0x0f8c -#define GT64260_PCI_1_SLAVE_DAC_CS_0_REMAP 0x0f90 -#define GT64260_PCI_1_SLAVE_DAC_CS_1_REMAP 0x0f94 -#define GT64260_PCI_1_SLAVE_DAC_CS_2_REMAP 0x0f98 -#define GT64260_PCI_1_SLAVE_DAC_CS_3_REMAP 0x0f9c -#define GT64260_PCI_1_SLAVE_DAC_BOOT_REMAP 0x0fa0 -#define GT64260_PCI_1_SLAVE_DAC_P2P_MEM_0_REMAP_LO 0x0fa4 -#define GT64260_PCI_1_SLAVE_DAC_P2P_MEM_0_REMAP_HI 0x0fa8 -#define GT64260_PCI_1_SLAVE_DAC_P2P_MEM_1_REMAP_LO 0x0fac -#define GT64260_PCI_1_SLAVE_DAC_P2P_MEM_1_REMAP_HI 0x0fb0 -#define GT64260_PCI_1_SLAVE_DAC_CPU_REMAP 0x0fb4 - -#define GT64260_PCI_1_SLAVE_EXP_ROM_REMAP 0x0fb8 -#define GT64260_PCI_1_SLAVE_PCI_DECODE_CNTL 0x0dbc - - -/* - ***************************************************************************** - * - * I2O Controller Interface Registers - * - ***************************************************************************** - */ - -/* FIXME: fill in */ - - - -/* - ***************************************************************************** - * - * DMA Controller Interface Registers - * - ***************************************************************************** - */ - -/* FIXME: fill in */ - - -/* - ***************************************************************************** - * - * Timer/Counter Interface Registers - * - ***************************************************************************** - */ - -/* FIXME: fill in */ - - -/* - ***************************************************************************** - * - * Communications Controller (Enet, Serial, etc.) Interface Registers - * - ***************************************************************************** - */ - -#define GT64260_ENET_0_CNTL_LO 0xf200 -#define GT64260_ENET_0_CNTL_HI 0xf204 -#define GT64260_ENET_0_RX_BUF_PCI_ADDR_HI 0xf208 -#define GT64260_ENET_0_TX_BUF_PCI_ADDR_HI 0xf20c -#define GT64260_ENET_0_RX_DESC_ADDR_HI 0xf210 -#define GT64260_ENET_0_TX_DESC_ADDR_HI 0xf214 -#define GT64260_ENET_0_HASH_TAB_PCI_ADDR_HI 0xf218 -#define GT64260_ENET_1_CNTL_LO 0xf220 -#define GT64260_ENET_1_CNTL_HI 0xf224 -#define GT64260_ENET_1_RX_BUF_PCI_ADDR_HI 0xf228 -#define GT64260_ENET_1_TX_BUF_PCI_ADDR_HI 0xf22c -#define GT64260_ENET_1_RX_DESC_ADDR_HI 0xf230 -#define GT64260_ENET_1_TX_DESC_ADDR_HI 0xf234 -#define GT64260_ENET_1_HASH_TAB_PCI_ADDR_HI 0xf238 -#define GT64260_ENET_2_CNTL_LO 0xf240 -#define GT64260_ENET_2_CNTL_HI 0xf244 -#define GT64260_ENET_2_RX_BUF_PCI_ADDR_HI 0xf248 -#define GT64260_ENET_2_TX_BUF_PCI_ADDR_HI 0xf24c -#define GT64260_ENET_2_RX_DESC_ADDR_HI 0xf250 -#define GT64260_ENET_2_TX_DESC_ADDR_HI 0xf254 -#define GT64260_ENET_2_HASH_TAB_PCI_ADDR_HI 0xf258 - -#define GT64260_MPSC_0_CNTL_LO 0xf280 -#define GT64260_MPSC_0_CNTL_HI 0xf284 -#define GT64260_MPSC_0_RX_BUF_PCI_ADDR_HI 0xf288 -#define GT64260_MPSC_0_TX_BUF_PCI_ADDR_HI 0xf28c -#define GT64260_MPSC_0_RX_DESC_ADDR_HI 0xf290 -#define GT64260_MPSC_0_TX_DESC_ADDR_HI 0xf294 -#define GT64260_MPSC_1_CNTL_LO 0xf2c0 -#define GT64260_MPSC_1_CNTL_HI 0xf2c4 -#define GT64260_MPSC_1_RX_BUF_PCI_ADDR_HI 0xf2c8 -#define GT64260_MPSC_1_TX_BUF_PCI_ADDR_HI 0xf2cc -#define GT64260_MPSC_1_RX_DESC_ADDR_HI 0xf2d0 -#define GT64260_MPSC_1_TX_DESC_ADDR_HI 0xf2d4 - -#define GT64260_SER_INIT_PCI_ADDR_HI 0xf320 -#define GT64260_SER_INIT_LAST_DATA 0xf324 -#define GT64260_SER_INIT_CONTROL 0xf328 -#define GT64260_SER_INIT_STATUS 0xf32c - -#define GT64260_COMM_ARBITER_CNTL 0xf300 -#define GT64260_COMM_CONFIG 0xb40c -#define GT64260_COMM_XBAR_TO 0xf304 -#define GT64260_COMM_INTR_CAUSE 0xf310 -#define GT64260_COMM_INTR_MASK 0xf314 -#define GT64260_COMM_ERR_ADDR 0xf318 - - -/* - ***************************************************************************** - * - * Fast Ethernet Controller Interface Registers - * - ***************************************************************************** - */ - -#define GT64260_ENET_PHY_ADDR 0x2000 -#define GT64260_ENET_ESMIR 0x2010 - -#define GT64260_ENET_E0PCR 0x2400 -#define GT64260_ENET_E0PCXR 0x2408 -#define GT64260_ENET_E0PCMR 0x2410 -#define GT64260_ENET_E0PSR 0x2418 -#define GT64260_ENET_E0SPR 0x2420 -#define GT64260_ENET_E0HTPR 0x2428 -#define GT64260_ENET_E0FCSAL 0x2430 -#define GT64260_ENET_E0FCSAH 0x2438 -#define GT64260_ENET_E0SDCR 0x2440 -#define GT64260_ENET_E0SDCMR 0x2448 -#define GT64260_ENET_E0ICR 0x2450 -#define GT64260_ENET_E0IMR 0x2458 -#define GT64260_ENET_E0FRDP0 0x2480 -#define GT64260_ENET_E0FRDP1 0x2484 -#define GT64260_ENET_E0FRDP2 0x2488 -#define GT64260_ENET_E0FRDP3 0x248c -#define GT64260_ENET_E0CRDP0 0x24a0 -#define GT64260_ENET_E0CRDP1 0x24a4 -#define GT64260_ENET_E0CRDP2 0x24a8 -#define GT64260_ENET_E0CRDP3 0x24ac -#define GT64260_ENET_E0CTDP0 0x24e0 -#define GT64260_ENET_E0CTDP1 0x24e4 -#define GT64260_ENET_0_DSCP2P0L 0x2460 -#define GT64260_ENET_0_DSCP2P0H 0x2464 -#define GT64260_ENET_0_DSCP2P1L 0x2468 -#define GT64260_ENET_0_DSCP2P1H 0x246c -#define GT64260_ENET_0_VPT2P 0x2470 -#define GT64260_ENET_0_MIB_CTRS 0x2500 - -#define GT64260_ENET_E1PCR 0x2800 -#define GT64260_ENET_E1PCXR 0x2808 -#define GT64260_ENET_E1PCMR 0x2810 -#define GT64260_ENET_E1PSR 0x2818 -#define GT64260_ENET_E1SPR 0x2820 -#define GT64260_ENET_E1HTPR 0x2828 -#define GT64260_ENET_E1FCSAL 0x2830 -#define GT64260_ENET_E1FCSAH 0x2838 -#define GT64260_ENET_E1SDCR 0x2840 -#define GT64260_ENET_E1SDCMR 0x2848 -#define GT64260_ENET_E1ICR 0x2850 -#define GT64260_ENET_E1IMR 0x2858 -#define GT64260_ENET_E1FRDP0 0x2880 -#define GT64260_ENET_E1FRDP1 0x2884 -#define GT64260_ENET_E1FRDP2 0x2888 -#define GT64260_ENET_E1FRDP3 0x288c -#define GT64260_ENET_E1CRDP0 0x28a0 -#define GT64260_ENET_E1CRDP1 0x28a4 -#define GT64260_ENET_E1CRDP2 0x28a8 -#define GT64260_ENET_E1CRDP3 0x28ac -#define GT64260_ENET_E1CTDP0 0x28e0 -#define GT64260_ENET_E1CTDP1 0x28e4 -#define GT64260_ENET_1_DSCP2P0L 0x2860 -#define GT64260_ENET_1_DSCP2P0H 0x2864 -#define GT64260_ENET_1_DSCP2P1L 0x2868 -#define GT64260_ENET_1_DSCP2P1H 0x286c -#define GT64260_ENET_1_VPT2P 0x2870 -#define GT64260_ENET_1_MIB_CTRS 0x2900 - -#define GT64260_ENET_E2PCR 0x2c00 -#define GT64260_ENET_E2PCXR 0x2c08 -#define GT64260_ENET_E2PCMR 0x2c10 -#define GT64260_ENET_E2PSR 0x2c18 -#define GT64260_ENET_E2SPR 0x2c20 -#define GT64260_ENET_E2HTPR 0x2c28 -#define GT64260_ENET_E2FCSAL 0x2c30 -#define GT64260_ENET_E2FCSAH 0x2c38 -#define GT64260_ENET_E2SDCR 0x2c40 -#define GT64260_ENET_E2SDCMR 0x2c48 -#define GT64260_ENET_E2ICR 0x2c50 -#define GT64260_ENET_E2IMR 0x2c58 -#define GT64260_ENET_E2FRDP0 0x2c80 -#define GT64260_ENET_E2FRDP1 0x2c84 -#define GT64260_ENET_E2FRDP2 0x2c88 -#define GT64260_ENET_E2FRDP3 0x2c8c -#define GT64260_ENET_E2CRDP0 0x2ca0 -#define GT64260_ENET_E2CRDP1 0x2ca4 -#define GT64260_ENET_E2CRDP2 0x2ca8 -#define GT64260_ENET_E2CRDP3 0x2cac -#define GT64260_ENET_E2CTDP0 0x2ce0 -#define GT64260_ENET_E2CTDP1 0x2ce4 -#define GT64260_ENET_2_DSCP2P0L 0x2c60 -#define GT64260_ENET_2_DSCP2P0H 0x2c64 -#define GT64260_ENET_2_DSCP2P1L 0x2c68 -#define GT64260_ENET_2_DSCP2P1H 0x2c6c -#define GT64260_ENET_2_VPT2P 0x2c70 -#define GT64260_ENET_2_MIB_CTRS 0x2d00 - - -/* - ***************************************************************************** - * - * Multi-Protocol Serial Controller Interface Registers - * - ***************************************************************************** - */ - -/* Signal Routing */ -#define GT64260_MPSC_MRR 0xb400 -#define GT64260_MPSC_RCRR 0xb404 -#define GT64260_MPSC_TCRR 0xb408 - -/* Main Configuratino Registers */ -#define GT64260_MPSC_0_MMCRL 0x8000 -#define GT64260_MPSC_0_MMCRH 0x8004 -#define GT64260_MPSC_0_MPCR 0x8008 -#define GT64260_MPSC_0_CHR_1 0x800c -#define GT64260_MPSC_0_CHR_2 0x8010 -#define GT64260_MPSC_0_CHR_3 0x8014 -#define GT64260_MPSC_0_CHR_4 0x8018 -#define GT64260_MPSC_0_CHR_5 0x801c -#define GT64260_MPSC_0_CHR_6 0x8020 -#define GT64260_MPSC_0_CHR_7 0x8024 -#define GT64260_MPSC_0_CHR_8 0x8028 -#define GT64260_MPSC_0_CHR_9 0x802c -#define GT64260_MPSC_0_CHR_10 0x8030 -#define GT64260_MPSC_0_CHR_11 0x8034 - -#define GT64260_MPSC_1_MMCRL 0x9000 -#define GT64260_MPSC_1_MMCRH 0x9004 -#define GT64260_MPSC_1_MPCR 0x9008 -#define GT64260_MPSC_1_CHR_1 0x900c -#define GT64260_MPSC_1_CHR_2 0x9010 -#define GT64260_MPSC_1_CHR_3 0x9014 -#define GT64260_MPSC_1_CHR_4 0x9018 -#define GT64260_MPSC_1_CHR_5 0x901c -#define GT64260_MPSC_1_CHR_6 0x9020 -#define GT64260_MPSC_1_CHR_7 0x9024 -#define GT64260_MPSC_1_CHR_8 0x9028 -#define GT64260_MPSC_1_CHR_9 0x902c -#define GT64260_MPSC_1_CHR_10 0x9030 -#define GT64260_MPSC_1_CHR_11 0x9034 - -#define GT64260_MPSC_0_INTR_CAUSE 0xb804 -#define GT64260_MPSC_0_INTR_MASK 0xb884 -#define GT64260_MPSC_1_INTR_CAUSE 0xb80c -#define GT64260_MPSC_1_INTR_MASK 0xb88c - -#define GT64260_MPSC_UART_CR_TEV (1<<1) -#define GT64260_MPSC_UART_CR_TA (1<<7) -#define GT64260_MPSC_UART_CR_TTCS (1<<9) -#define GT64260_MPSC_UART_CR_REV (1<<17) -#define GT64260_MPSC_UART_CR_RA (1<<23) -#define GT64260_MPSC_UART_CR_CRD (1<<25) -#define GT64260_MPSC_UART_CR_EH (1<<31) - -#define GT64260_MPSC_UART_ESR_CTS (1<<0) -#define GT64260_MPSC_UART_ESR_CD (1<<1) -#define GT64260_MPSC_UART_ESR_TIDLE (1<<3) -#define GT64260_MPSC_UART_ESR_RHS (1<<5) -#define GT64260_MPSC_UART_ESR_RLS (1<<7) -#define GT64260_MPSC_UART_ESR_RLIDL (1<<11) - - -/* - ***************************************************************************** - * - * Serial DMA Controller Interface Registers - * - ***************************************************************************** - */ - -#define GT64260_SDMA_0_SDC 0x4000 -#define GT64260_SDMA_0_SDCM 0x4008 -#define GT64260_SDMA_0_RX_DESC 0x4800 -#define GT64260_SDMA_0_RX_BUF_PTR 0x4808 -#define GT64260_SDMA_0_SCRDP 0x4810 -#define GT64260_SDMA_0_TX_DESC 0x4c00 -#define GT64260_SDMA_0_SCTDP 0x4c10 -#define GT64260_SDMA_0_SFTDP 0x4c14 - -#define GT64260_SDMA_1_SDC 0x6000 -#define GT64260_SDMA_1_SDCM 0x6008 -#define GT64260_SDMA_1_RX_DESC 0x6800 -#define GT64260_SDMA_1_RX_BUF_PTR 0x6808 -#define GT64260_SDMA_1_SCRDP 0x6810 -#define GT64260_SDMA_1_TX_DESC 0x6c00 -#define GT64260_SDMA_1_SCTDP 0x6c10 -#define GT64260_SDMA_1_SFTDP 0x6c14 - -#define GT64260_SDMA_INTR_CAUSE 0xb800 -#define GT64260_SDMA_INTR_MASK 0xb880 - -#define GT64260_SDMA_DESC_CMDSTAT_PE (1<<0) -#define GT64260_SDMA_DESC_CMDSTAT_CDL (1<<1) -#define GT64260_SDMA_DESC_CMDSTAT_FR (1<<3) -#define GT64260_SDMA_DESC_CMDSTAT_OR (1<<6) -#define GT64260_SDMA_DESC_CMDSTAT_BR (1<<9) -#define GT64260_SDMA_DESC_CMDSTAT_MI (1<<10) -#define GT64260_SDMA_DESC_CMDSTAT_A (1<<11) -#define GT64260_SDMA_DESC_CMDSTAT_AM (1<<12) -#define GT64260_SDMA_DESC_CMDSTAT_CT (1<<13) -#define GT64260_SDMA_DESC_CMDSTAT_C (1<<14) -#define GT64260_SDMA_DESC_CMDSTAT_ES (1<<15) -#define GT64260_SDMA_DESC_CMDSTAT_L (1<<16) -#define GT64260_SDMA_DESC_CMDSTAT_F (1<<17) -#define GT64260_SDMA_DESC_CMDSTAT_P (1<<18) -#define GT64260_SDMA_DESC_CMDSTAT_EI (1<<23) -#define GT64260_SDMA_DESC_CMDSTAT_O (1<<31) - -#define GT64260_SDMA_SDC_RFT (1<<0) -#define GT64260_SDMA_SDC_SFM (1<<1) -#define GT64260_SDMA_SDC_BLMR (1<<6) -#define GT64260_SDMA_SDC_BLMT (1<<7) -#define GT64260_SDMA_SDC_POVR (1<<8) -#define GT64260_SDMA_SDC_RIFB (1<<9) - -#define GT64260_SDMA_SDCM_ERD (1<<7) -#define GT64260_SDMA_SDCM_AR (1<<15) -#define GT64260_SDMA_SDCM_STD (1<<16) -#define GT64260_SDMA_SDCM_TXD (1<<23) -#define GT64260_SDMA_SDCM_AT (1<<31) - -#define GT64260_SDMA_0_CAUSE_RXBUF (1<<0) -#define GT64260_SDMA_0_CAUSE_RXERR (1<<1) -#define GT64260_SDMA_0_CAUSE_TXBUF (1<<2) -#define GT64260_SDMA_0_CAUSE_TXEND (1<<3) -#define GT64260_SDMA_1_CAUSE_RXBUF (1<<8) -#define GT64260_SDMA_1_CAUSE_RXERR (1<<9) -#define GT64260_SDMA_1_CAUSE_TXBUF (1<<10) -#define GT64260_SDMA_1_CAUSE_TXEND (1<<11) - - -/* - ***************************************************************************** - * - * Baud Rate Generator Interface Registers - * - ***************************************************************************** - */ - -#define GT64260_BRG_0_BCR 0xb200 -#define GT64260_BRG_0_BTR 0xb204 -#define GT64260_BRG_1_BCR 0xb208 -#define GT64260_BRG_1_BTR 0xb20c -#define GT64260_BRG_2_BCR 0xb210 -#define GT64260_BRG_2_BTR 0xb214 - -#define GT64260_BRG_INTR_CAUSE 0xb834 -#define GT64260_BRG_INTR_MASK 0xb8b4 - - -/* - ***************************************************************************** - * - * Watchdog Timer Interface Registers - * - ***************************************************************************** - */ - -#define GT64260_WDT_WDC 0xb410 -#define GT64260_WDT_WDV 0xb414 - - -/* - ***************************************************************************** - * - * General Purpose Pins Controller Interface Registers - * - ***************************************************************************** - */ - -#define GT64260_GPP_IO_CNTL 0xf100 -#define GT64260_GPP_LEVEL_CNTL 0xf110 -#define GT64260_GPP_VALUE 0xf104 -#define GT64260_GPP_INTR_CAUSE 0xf108 -#define GT64260_GPP_INTR_MASK 0xf10c - - -/* - ***************************************************************************** - * - * Multi-Purpose Pins Controller Interface Registers - * - ***************************************************************************** - */ - -#define GT64260_MPP_CNTL_0 0xf000 -#define GT64260_MPP_CNTL_1 0xf004 -#define GT64260_MPP_CNTL_2 0xf008 -#define GT64260_MPP_CNTL_3 0xf00c -#define GT64260_MPP_SERIAL_PORTS_MULTIPLEX 0xf010 - - -/* - ***************************************************************************** - * - * I2C Controller Interface Registers - * - ***************************************************************************** - */ - -/* FIXME: fill in */ - - -/* - ***************************************************************************** - * - * Interrupt Controller Interface Registers - * - ***************************************************************************** - */ - -#define GT64260_IC_MAIN_CAUSE_LO 0x0c18 -#define GT64260_IC_MAIN_CAUSE_HI 0x0c68 -#define GT64260_IC_CPU_INTR_MASK_LO 0x0c1c -#define GT64260_IC_CPU_INTR_MASK_HI 0x0c6c -#define GT64260_IC_CPU_SELECT_CAUSE 0x0c70 -#define GT64260_IC_PCI_0_INTR_MASK_LO 0x0c24 -#define GT64260_IC_PCI_0_INTR_MASK_HI 0x0c64 -#define GT64260_IC_PCI_0_SELECT_CAUSE 0x0c74 -#define GT64260_IC_PCI_1_INTR_MASK_LO 0x0ca4 -#define GT64260_IC_PCI_1_INTR_MASK_HI 0x0ce4 -#define GT64260_IC_PCI_1_SELECT_CAUSE 0x0cf4 -#define GT64260_IC_CPU_INT_0_MASK 0x0e60 -#define GT64260_IC_CPU_INT_1_MASK 0x0e64 -#define GT64260_IC_CPU_INT_2_MASK 0x0e68 -#define GT64260_IC_CPU_INT_3_MASK 0x0e6c - - -#endif /* __ASMPPC_GT64260_DEFS_H */ diff --git a/include/asm-ppc/harrier.h b/include/asm-ppc/harrier.h deleted file mode 100644 index 7acd7fc126ec..000000000000 --- a/include/asm-ppc/harrier.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Definitions for Motorola MCG Harrier North Bridge & Memory controller - * - * Author: Dale Farnsworth - * dale.farnsworth@mvista.com - * - * Modified by: Randy Vinson - * rvinson@mvista.com - * - * Copyright 2001-2002 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __ASMPPC_HARRIER_H -#define __ASMPPC_HARRIER_H - -#include <linux/types.h> -#include <asm/pci-bridge.h> - -struct pci_controller; -int harrier_init(struct pci_controller *hose, - uint ppc_reg_base, - ulong processor_pci_mem_start, - ulong processor_pci_mem_end, - ulong processor_pci_io_start, - ulong processor_pci_io_end, - ulong processor_mpic_base); - -unsigned long harrier_get_mem_size(uint smc_base); - -int harrier_mpic_init(unsigned int pci_mem_offset); - -void harrier_setup_nonmonarch(uint ppc_reg_base, - uint in0_size); -void harrier_release_eready(uint ppc_reg_base); - -void harrier_wait_eready(uint ppc_reg_base); - -#endif /* __ASMPPC_HARRIER_H */ diff --git a/include/asm-ppc/hawk.h b/include/asm-ppc/hawk.h deleted file mode 100644 index f347007d22af..000000000000 --- a/include/asm-ppc/hawk.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * include/asm-ppc/hawk.h - * - * Support functions for MCG Falcon/Raven & HAWK North Bridge & Memory ctlr. - * - * Author: Mark A. Greer - * mgreer@mvista.com - * - * Modified by Randy Vinson (rvinson@mvista.com) - * - * 2001,2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __ASMPPC_HAWK_H -#define __ASMPPC_HAWK_H - -#include <asm/pci-bridge.h> -#include <asm/hawk_defs.h> - -extern int hawk_init(struct pci_controller *hose, - unsigned int ppc_reg_base, unsigned long processor_pci_mem_start, - unsigned long processor_pci_mem_end, - unsigned long processor_pci_io_start, - unsigned long processor_pci_io_end, - unsigned long processor_mpic_base); -extern unsigned long hawk_get_mem_size(unsigned int smc_base); -extern int hawk_mpic_init(unsigned int pci_mem_offset); - -#endif /* __ASMPPC_HAWK_H */ diff --git a/include/asm-ppc/hawk_defs.h b/include/asm-ppc/hawk_defs.h deleted file mode 100644 index 6d1d2baf648c..000000000000 --- a/include/asm-ppc/hawk_defs.h +++ /dev/null @@ -1,76 +0,0 @@ -/* - * include/asm-ppc/hawk_defs.h - * - * Definitions for Motorola MCG Falcon/Raven & HAWK North Bridge & Memory ctlr. - * - * Author: Mark A. Greer - * mgreer@mvista.com - * - * Modified by Randy Vinson (rvinson@mvista.com) - * - * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __ASMPPC_HAWK_DEFS_H -#define __ASMPPC_HAWK_DEFS_H - -#include <asm/pci-bridge.h> - -/* - * The Falcon/Raven and HAWK have 4 sets of registers: - * 1) PPC Registers which define the mappings from PPC bus to PCI bus, - * etc. - * 2) PCI Registers which define the mappings from PCI bus to PPC bus and the - * MPIC base address. - * 3) MPIC registers - * 4) System Memory Controller (SMC) registers. - */ - -#define HAWK_PCI_CONFIG_ADDR_OFF 0x00000cf8 -#define HAWK_PCI_CONFIG_DATA_OFF 0x00000cfc - -#define HAWK_MPIC_SIZE 0x00040000U -#define HAWK_SMC_SIZE 0x00001000U - -/* - * Define PPC register offsets. - */ -#define HAWK_PPC_XSADD0_OFF 0x40 -#define HAWK_PPC_XSOFF0_OFF 0x44 -#define HAWK_PPC_XSADD1_OFF 0x48 -#define HAWK_PPC_XSOFF1_OFF 0x4c -#define HAWK_PPC_XSADD2_OFF 0x50 -#define HAWK_PPC_XSOFF2_OFF 0x54 -#define HAWK_PPC_XSADD3_OFF 0x58 -#define HAWK_PPC_XSOFF3_OFF 0x5c - -/* - * Define PCI register offsets. - */ -#define HAWK_PCI_PSADD0_OFF 0x80 -#define HAWK_PCI_PSOFF0_OFF 0x84 -#define HAWK_PCI_PSADD1_OFF 0x88 -#define HAWK_PCI_PSOFF1_OFF 0x8c -#define HAWK_PCI_PSADD2_OFF 0x90 -#define HAWK_PCI_PSOFF2_OFF 0x94 -#define HAWK_PCI_PSADD3_OFF 0x98 -#define HAWK_PCI_PSOFF3_OFF 0x9c - -/* - * Define the System Memory Controller (SMC) register offsets. - */ -#define HAWK_SMC_RAM_A_SIZE_REG_OFF 0x10 -#define HAWK_SMC_RAM_B_SIZE_REG_OFF 0x11 -#define HAWK_SMC_RAM_C_SIZE_REG_OFF 0x12 -#define HAWK_SMC_RAM_D_SIZE_REG_OFF 0x13 -#define HAWK_SMC_RAM_E_SIZE_REG_OFF 0xc0 /* HAWK Only */ -#define HAWK_SMC_RAM_F_SIZE_REG_OFF 0xc1 /* HAWK Only */ -#define HAWK_SMC_RAM_G_SIZE_REG_OFF 0xc2 /* HAWK Only */ -#define HAWK_SMC_RAM_H_SIZE_REG_OFF 0xc3 /* HAWK Only */ - -#define FALCON_SMC_REG_COUNT 4 -#define HAWK_SMC_REG_COUNT 8 -#endif /* __ASMPPC_HAWK_DEFS_H */ diff --git a/include/asm-ppc/highmem.h b/include/asm-ppc/highmem.h deleted file mode 100644 index f7b21ee302b4..000000000000 --- a/include/asm-ppc/highmem.h +++ /dev/null @@ -1,135 +0,0 @@ -/* - * highmem.h: virtual kernel memory mappings for high memory - * - * PowerPC version, stolen from the i386 version. - * - * Used in CONFIG_HIGHMEM systems for memory pages which - * are not addressable by direct kernel virtual addresses. - * - * Copyright (C) 1999 Gerhard Wichert, Siemens AG - * Gerhard.Wichert@pdb.siemens.de - * - * - * Redesigned the x86 32-bit VM architecture to deal with - * up to 16 Terrabyte physical memory. With current x86 CPUs - * we now support up to 64 Gigabytes physical RAM. - * - * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com> - */ - -#ifndef _ASM_HIGHMEM_H -#define _ASM_HIGHMEM_H - -#ifdef __KERNEL__ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <asm/kmap_types.h> -#include <asm/tlbflush.h> -#include <asm/page.h> - -/* undef for production */ -#define HIGHMEM_DEBUG 1 - -extern pte_t *kmap_pte; -extern pgprot_t kmap_prot; -extern pte_t *pkmap_page_table; - -/* - * Right now we initialize only a single pte table. It can be extended - * easily, subsequent pte tables have to be allocated in one physical - * chunk of RAM. - */ -#define PKMAP_BASE CONFIG_HIGHMEM_START -#define LAST_PKMAP (1 << PTE_SHIFT) -#define LAST_PKMAP_MASK (LAST_PKMAP-1) -#define PKMAP_NR(virt) ((virt-PKMAP_BASE) >> PAGE_SHIFT) -#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) - -#define KMAP_FIX_BEGIN (PKMAP_BASE + 0x00400000UL) - -extern void *kmap_high(struct page *page); -extern void kunmap_high(struct page *page); - -static inline void *kmap(struct page *page) -{ - might_sleep(); - if (!PageHighMem(page)) - return page_address(page); - return kmap_high(page); -} - -static inline void kunmap(struct page *page) -{ - BUG_ON(in_interrupt()); - if (!PageHighMem(page)) - return; - kunmap_high(page); -} - -/* - * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap - * gives a more generic (and caching) interface. But kmap_atomic can - * be used in IRQ contexts, so in some (very limited) cases we need - * it. - */ -static inline void *kmap_atomic(struct page *page, enum km_type type) -{ - unsigned int idx; - unsigned long vaddr; - - /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */ - pagefault_disable(); - if (!PageHighMem(page)) - return page_address(page); - - idx = type + KM_TYPE_NR*smp_processor_id(); - vaddr = KMAP_FIX_BEGIN + idx * PAGE_SIZE; -#ifdef HIGHMEM_DEBUG - BUG_ON(!pte_none(*(kmap_pte+idx))); -#endif - set_pte_at(&init_mm, vaddr, kmap_pte+idx, mk_pte(page, kmap_prot)); - flush_tlb_page(NULL, vaddr); - - return (void*) vaddr; -} - -static inline void kunmap_atomic(void *kvaddr, enum km_type type) -{ -#ifdef HIGHMEM_DEBUG - unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK; - unsigned int idx = type + KM_TYPE_NR*smp_processor_id(); - - if (vaddr < KMAP_FIX_BEGIN) { // FIXME - pagefault_enable(); - return; - } - - BUG_ON(vaddr != KMAP_FIX_BEGIN + idx * PAGE_SIZE); - - /* - * force other mappings to Oops if they'll try to access - * this pte without first remap it - */ - pte_clear(&init_mm, vaddr, kmap_pte+idx); - flush_tlb_page(NULL, vaddr); -#endif - pagefault_enable(); -} - -static inline struct page *kmap_atomic_to_page(void *ptr) -{ - unsigned long idx, vaddr = (unsigned long) ptr; - - if (vaddr < KMAP_FIX_BEGIN) - return virt_to_page(ptr); - - idx = (vaddr - KMAP_FIX_BEGIN) >> PAGE_SHIFT; - return pte_page(kmap_pte[idx]); -} - -#define flush_cache_kmaps() flush_cache_all() - -#endif /* __KERNEL__ */ - -#endif /* _ASM_HIGHMEM_H */ diff --git a/include/asm-ppc/hydra.h b/include/asm-ppc/hydra.h deleted file mode 100644 index 1ad4eed07fbe..000000000000 --- a/include/asm-ppc/hydra.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * include/asm-ppc/hydra.h -- Mac I/O `Hydra' definitions - * - * Copyright (C) 1997 Geert Uytterhoeven - * - * This file is based on the following documentation: - * - * Macintosh Technology in the Common Hardware Reference Platform - * Apple Computer, Inc. - * - * © Copyright 1995 Apple Computer, Inc. All rights reserved. - * - * It's available online from http://chrp.apple.com/MacTech.pdf. - * You can obtain paper copies of this book from computer bookstores or by - * writing Morgan Kaufmann Publishers, Inc., 340 Pine Street, Sixth Floor, San - * Francisco, CA 94104. Reference ISBN 1-55860-393-X. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -#ifndef _ASMPPC_HYDRA_H -#define _ASMPPC_HYDRA_H - -#ifdef __KERNEL__ - -struct Hydra { - /* DBDMA Controller Register Space */ - char Pad1[0x30]; - u_int CachePD; - u_int IDs; - u_int Feature_Control; - char Pad2[0x7fc4]; - /* DBDMA Channel Register Space */ - char SCSI_DMA[0x100]; - char Pad3[0x300]; - char SCCA_Tx_DMA[0x100]; - char SCCA_Rx_DMA[0x100]; - char SCCB_Tx_DMA[0x100]; - char SCCB_Rx_DMA[0x100]; - char Pad4[0x7800]; - /* Device Register Space */ - char SCSI[0x1000]; - char ADB[0x1000]; - char SCC_Legacy[0x1000]; - char SCC[0x1000]; - char Pad9[0x2000]; - char VIA[0x2000]; - char Pad10[0x28000]; - char OpenPIC[0x40000]; -}; - -extern volatile struct Hydra __iomem *Hydra; - - - /* - * Feature Control Register - */ - -#define HYDRA_FC_SCC_CELL_EN 0x00000001 /* Enable SCC Clock */ -#define HYDRA_FC_SCSI_CELL_EN 0x00000002 /* Enable SCSI Clock */ -#define HYDRA_FC_SCCA_ENABLE 0x00000004 /* Enable SCC A Lines */ -#define HYDRA_FC_SCCB_ENABLE 0x00000008 /* Enable SCC B Lines */ -#define HYDRA_FC_ARB_BYPASS 0x00000010 /* Bypass Internal Arbiter */ -#define HYDRA_FC_RESET_SCC 0x00000020 /* Reset SCC */ -#define HYDRA_FC_MPIC_ENABLE 0x00000040 /* Enable OpenPIC */ -#define HYDRA_FC_SLOW_SCC_PCLK 0x00000080 /* 1=15.6672, 0=25 MHz */ -#define HYDRA_FC_MPIC_IS_MASTER 0x00000100 /* OpenPIC Master Mode */ - - - /* - * OpenPIC Interrupt Sources - */ - -#define HYDRA_INT_SIO 0 -#define HYDRA_INT_SCSI_DMA 1 -#define HYDRA_INT_SCCA_TX_DMA 2 -#define HYDRA_INT_SCCA_RX_DMA 3 -#define HYDRA_INT_SCCB_TX_DMA 4 -#define HYDRA_INT_SCCB_RX_DMA 5 -#define HYDRA_INT_SCSI 6 -#define HYDRA_INT_SCCA 7 -#define HYDRA_INT_SCCB 8 -#define HYDRA_INT_VIA 9 -#define HYDRA_INT_ADB 10 -#define HYDRA_INT_ADB_NMI 11 -#define HYDRA_INT_EXT1 12 /* PCI IRQW */ -#define HYDRA_INT_EXT2 13 /* PCI IRQX */ -#define HYDRA_INT_EXT3 14 /* PCI IRQY */ -#define HYDRA_INT_EXT4 15 /* PCI IRQZ */ -#define HYDRA_INT_EXT5 16 /* IDE Primay/Secondary */ -#define HYDRA_INT_EXT6 17 /* IDE Secondary */ -#define HYDRA_INT_EXT7 18 /* Power Off Request */ -#define HYDRA_INT_SPARE 19 - -extern int hydra_init(void); -extern void macio_adb_init(void); - -#endif /* __KERNEL__ */ - -#endif /* _ASMPPC_HYDRA_H */ diff --git a/include/asm-ppc/ibm403.h b/include/asm-ppc/ibm403.h deleted file mode 100644 index c9c5d539cfdb..000000000000 --- a/include/asm-ppc/ibm403.h +++ /dev/null @@ -1,478 +0,0 @@ -/* - * Authors: Armin Kuster <akuster@mvista.com> and Tom Rini <trini@mvista.com> - * - * 2001 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - - -#ifdef __KERNEL__ -#ifndef __ASM_IBM403_H__ -#define __ASM_IBM403_H__ - - -#if defined(CONFIG_403GCX) - -#define DCRN_BE_BASE 0x090 -#define DCRN_DMA0_BASE 0x0C0 -#define DCRN_DMA1_BASE 0x0C8 -#define DCRN_DMA2_BASE 0x0D0 -#define DCRN_DMA3_BASE 0x0D8 -#define DCRNCAP_DMA_CC 1 /* have DMA chained count capability */ -#define DCRN_DMASR_BASE 0x0E0 - -#define DCRN_EXIER_BASE 0x042 -#define DCRN_EXISR_BASE 0x040 -#define DCRN_IOCR_BASE 0x0A0 - - -/* ------------------------------------------------------------------------- */ -#endif - - - -#ifdef DCRN_BE_BASE -#define DCRN_BEAR (DCRN_BE_BASE + 0x0) /* Bus Error Address Register */ -#define DCRN_BESR (DCRN_BE_BASE + 0x1) /* Bus Error Syndrome Register*/ -#endif -/* DCRN_BESR */ -#define BESR_DSES 0x80000000 /* Data-Side Error Status */ -#define BESR_DMES 0x40000000 /* DMA Error Status */ -#define BESR_RWS 0x20000000 /* Read/Write Status */ -#define BESR_ETMASK 0x1C000000 /* Error Type */ -#define ET_PROT 0 -#define ET_PARITY 1 -#define ET_NCFG 2 -#define ET_BUSERR 4 -#define ET_BUSTO 6 - -#ifdef DCRN_CHCR_BASE -#define DCRN_CHCR0 (DCRN_CHCR_BASE + 0x0) /* Chip Control Register 1 */ -#define DCRN_CHCR1 (DCRN_CHCR_BASE + 0x1) /* Chip Control Register 2 */ -#endif -#define CHR1_CETE 0x00800000 /* CPU external timer enable */ -#define CHR1_PCIPW 0x00008000 /* PCI Int enable/Peripheral Write enable */ - -#ifdef DCRN_CHPSR_BASE -#define DCRN_CHPSR (DCRN_CHPSR_BASE + 0x0) /* Chip Pin Strapping */ -#endif - -#ifdef DCRN_CIC_BASE -#define DCRN_CICCR (DCRN_CIC_BASE + 0x0) /* CIC Control Register */ -#define DCRN_DMAS1 (DCRN_CIC_BASE + 0x1) /* DMA Select1 Register */ -#define DCRN_DMAS2 (DCRN_CIC_BASE + 0x2) /* DMA Select2 Register */ -#define DCRN_CICVCR (DCRN_CIC_BASE + 0x3) /* CIC Video COntro Register */ -#define DCRN_CICSEL3 (DCRN_CIC_BASE + 0x5) /* CIC Select 3 Register */ -#define DCRN_SGPO (DCRN_CIC_BASE + 0x6) /* CIC GPIO Output Register */ -#define DCRN_SGPOD (DCRN_CIC_BASE + 0x7) /* CIC GPIO OD Register */ -#define DCRN_SGPTC (DCRN_CIC_BASE + 0x8) /* CIC GPIO Tristate Ctrl Reg */ -#define DCRN_SGPI (DCRN_CIC_BASE + 0x9) /* CIC GPIO Input Reg */ -#endif - -#ifdef DCRN_CPMFR_BASE -#define DCRN_CPMFR (DCRN_CPMFR_BASE + 0x0) /* CPM Force */ -#endif - -#ifndef CPM_AUD -#define CPM_AUD 0x00000000 -#endif -#ifndef CPM_BRG -#define CPM_BRG 0x00000000 -#endif -#ifndef CPM_CBS -#define CPM_CBS 0x00000000 -#endif -#ifndef CPM_CPU -#define CPM_CPU 0x00000000 -#endif -#ifndef CPM_DCP -#define CPM_DCP 0x00000000 -#endif -#ifndef CPM_DCRX -#define CPM_DCRX 0x00000000 -#endif -#ifndef CPM_DENC -#define CPM_DENC 0x00000000 -#endif -#ifndef CPM_DMA -#define CPM_DMA 0x00000000 -#endif -#ifndef CPM_DSCR -#define CPM_DSCR 0x00000000 -#endif -#ifndef CPM_EBC -#define CPM_EBC 0x00000000 -#endif -#ifndef CPM_EBIU -#define CPM_EBIU 0x00000000 -#endif -#ifndef CPM_EMAC_MM -#define CPM_EMAC_MM 0x00000000 -#endif -#ifndef CPM_EMAC_RM -#define CPM_EMAC_RM 0x00000000 -#endif -#ifndef CPM_EMAC_TM -#define CPM_EMAC_TM 0x00000000 -#endif -#ifndef CPM_GPIO0 -#define CPM_GPIO0 0x00000000 -#endif -#ifndef CPM_GPT -#define CPM_GPT 0x00000000 -#endif -#ifndef CPM_I1284 -#define CPM_I1284 0x00000000 -#endif -#ifndef CPM_IIC0 -#define CPM_IIC0 0x00000000 -#endif -#ifndef CPM_IIC1 -#define CPM_IIC1 0x00000000 -#endif -#ifndef CPM_MSI -#define CPM_MSI 0x00000000 -#endif -#ifndef CPM_PCI -#define CPM_PCI 0x00000000 -#endif -#ifndef CPM_PLB -#define CPM_PLB 0x00000000 -#endif -#ifndef CPM_SC0 -#define CPM_SC0 0x00000000 -#endif -#ifndef CPM_SC1 -#define CPM_SC1 0x00000000 -#endif -#ifndef CPM_SDRAM0 -#define CPM_SDRAM0 0x00000000 -#endif -#ifndef CPM_SDRAM1 -#define CPM_SDRAM1 0x00000000 -#endif -#ifndef CPM_TMRCLK -#define CPM_TMRCLK 0x00000000 -#endif -#ifndef CPM_UART0 -#define CPM_UART0 0x00000000 -#endif -#ifndef CPM_UART1 -#define CPM_UART1 0x00000000 -#endif -#ifndef CPM_UART2 -#define CPM_UART2 0x00000000 -#endif -#ifndef CPM_UIC -#define CPM_UIC 0x00000000 -#endif -#ifndef CPM_VID2 -#define CPM_VID2 0x00000000 -#endif -#ifndef CPM_XPT27 -#define CPM_XPT27 0x00000000 -#endif -#ifndef CPM_XPT54 -#define CPM_XPT54 0x00000000 -#endif - -#ifdef DCRN_CPMSR_BASE -#define DCRN_CPMSR (DCRN_CPMSR_BASE + 0x0) /* CPM Status */ -#define DCRN_CPMER (DCRN_CPMSR_BASE + 0x1) /* CPM Enable */ -#endif - -#ifdef DCRN_DCP0_BASE -#define DCRN_DCP0_CFGADDR (DCRN_DCP0_BASE + 0x0) /* Decompression Controller Address */ -#define DCRN_DCP0_CFGDATA (DCRN_DCP0_BASE + 0x1) /* Decompression Controller Data */ -#endif - -#ifdef DCRN_DCRX_BASE -#define DCRN_DCRXICR (DCRN_DCRX_BASE + 0x0) /* Internal Control Register */ -#define DCRN_DCRXISR (DCRN_DCRX_BASE + 0x1) /* Internal Status Register */ -#define DCRN_DCRXECR (DCRN_DCRX_BASE + 0x2) /* External Control Register */ -#define DCRN_DCRXESR (DCRN_DCRX_BASE + 0x3) /* External Status Register */ -#define DCRN_DCRXTAR (DCRN_DCRX_BASE + 0x4) /* Target Address Register */ -#define DCRN_DCRXTDR (DCRN_DCRX_BASE + 0x5) /* Target Data Register */ -#define DCRN_DCRXIGR (DCRN_DCRX_BASE + 0x6) /* Interrupt Generation Register */ -#define DCRN_DCRXBCR (DCRN_DCRX_BASE + 0x7) /* Line Buffer Control Register */ -#endif - -#ifdef DCRN_DMA0_BASE -#define DCRN_DMACR0 (DCRN_DMA0_BASE + 0x0) /* DMA Channel Control Register 0 */ -#define DCRN_DMACT0 (DCRN_DMA0_BASE + 0x1) /* DMA Count Register 0 */ -#define DCRN_DMADA0 (DCRN_DMA0_BASE + 0x2) /* DMA Destination Address Register 0 */ -#define DCRN_DMASA0 (DCRN_DMA0_BASE + 0x3) /* DMA Source Address Register 0 */ -#ifdef DCRNCAP_DMA_CC -#define DCRN_DMACC0 (DCRN_DMA0_BASE + 0x4) /* DMA Chained Count Register 0 */ -#endif - -#ifdef DCRNCAP_DMA_SG -#define DCRN_ASG0 (DCRN_DMA0_BASE + 0x4) /* DMA Scatter/Gather Descriptor Addr 0 */ -#endif -#endif - -#ifdef DCRN_DMA1_BASE -#define DCRN_DMACR1 (DCRN_DMA1_BASE + 0x0) /* DMA Channel Control Register 1 */ -#define DCRN_DMACT1 (DCRN_DMA1_BASE + 0x1) /* DMA Count Register 1 */ -#define DCRN_DMADA1 (DCRN_DMA1_BASE + 0x2) /* DMA Destination Address Register 1 */ -#define DCRN_DMASA1 (DCRN_DMA1_BASE + 0x3) /* DMA Source Address Register 1 */ - -#ifdef DCRNCAP_DMA_CC -#define DCRN_DMACC1 (DCRN_DMA1_BASE + 0x4) /* DMA Chained Count Register 1 */ -#endif -#ifdef DCRNCAP_DMA_SG -#define DCRN_ASG1 (DCRN_DMA1_BASE + 0x4) /* DMA Scatter/Gather Descriptor Addr 1 */ -#endif -#endif - -#ifdef DCRN_DMA2_BASE -#define DCRN_DMACR2 (DCRN_DMA2_BASE + 0x0) /* DMA Channel Control Register 2 */ -#define DCRN_DMACT2 (DCRN_DMA2_BASE + 0x1) /* DMA Count Register 2 */ -#define DCRN_DMADA2 (DCRN_DMA2_BASE + 0x2) /* DMA Destination Address Register 2 */ -#define DCRN_DMASA2 (DCRN_DMA2_BASE + 0x3) /* DMA Source Address Register 2 */ -#ifdef DCRNCAP_DMA_CC -#define DCRN_DMACC2 (DCRN_DMA2_BASE + 0x4) /* DMA Chained Count Register 2 */ -#endif -#ifdef DCRNCAP_DMA_SG -#define DCRN_ASG2 (DCRN_DMA2_BASE + 0x4) /* DMA Scatter/Gather Descriptor Addr 2 */ -#endif -#endif - -#ifdef DCRN_DMA3_BASE -#define DCRN_DMACR3 (DCRN_DMA3_BASE + 0x0) /* DMA Channel Control Register 3 */ -#define DCRN_DMACT3 (DCRN_DMA3_BASE + 0x1) /* DMA Count Register 3 */ -#define DCRN_DMADA3 (DCRN_DMA3_BASE + 0x2) /* DMA Destination Address Register 3 */ -#define DCRN_DMASA3 (DCRN_DMA3_BASE + 0x3) /* DMA Source Address Register 3 */ -#ifdef DCRNCAP_DMA_CC -#define DCRN_DMACC3 (DCRN_DMA3_BASE + 0x4) /* DMA Chained Count Register 3 */ -#endif -#ifdef DCRNCAP_DMA_SG -#define DCRN_ASG3 (DCRN_DMA3_BASE + 0x4) /* DMA Scatter/Gather Descriptor Addr 3 */ -#endif -#endif - -#ifdef DCRN_DMASR_BASE -#define DCRN_DMASR (DCRN_DMASR_BASE + 0x0) /* DMA Status Register */ -#ifdef DCRNCAP_DMA_SG -#define DCRN_ASGC (DCRN_DMASR_BASE + 0x3) /* DMA Scatter/Gather Command */ -/* don't know if these two registers always exist if scatter/gather exists */ -#define DCRN_POL (DCRN_DMASR_BASE + 0x6) /* DMA Polarity Register */ -#define DCRN_SLP (DCRN_DMASR_BASE + 0x5) /* DMA Sleep Register */ -#endif -#endif - -#ifdef DCRN_EBC_BASE -#define DCRN_EBCCFGADR (DCRN_EBC_BASE + 0x0) /* Peripheral Controller Address */ -#define DCRN_EBCCFGDATA (DCRN_EBC_BASE + 0x1) /* Peripheral Controller Data */ -#endif - -#ifdef DCRN_EXIER_BASE -#define DCRN_EXIER (DCRN_EXIER_BASE + 0x0) /* External Interrupt Enable Register */ -#endif - -#ifdef DCRN_EBIMC_BASE -#define DCRN_BRCRH0 (DCRN_EBIMC_BASE + 0x0) /* Bus Region Config High 0 */ -#define DCRN_BRCRH1 (DCRN_EBIMC_BASE + 0x1) /* Bus Region Config High 1 */ -#define DCRN_BRCRH2 (DCRN_EBIMC_BASE + 0x2) /* Bus Region Config High 2 */ -#define DCRN_BRCRH3 (DCRN_EBIMC_BASE + 0x3) /* Bus Region Config High 3 */ -#define DCRN_BRCRH4 (DCRN_EBIMC_BASE + 0x4) /* Bus Region Config High 4 */ -#define DCRN_BRCRH5 (DCRN_EBIMC_BASE + 0x5) /* Bus Region Config High 5 */ -#define DCRN_BRCRH6 (DCRN_EBIMC_BASE + 0x6) /* Bus Region Config High 6 */ -#define DCRN_BRCRH7 (DCRN_EBIMC_BASE + 0x7) /* Bus Region Config High 7 */ -#define DCRN_BRCR0 (DCRN_EBIMC_BASE + 0x10)/* BRC 0 */ -#define DCRN_BRCR1 (DCRN_EBIMC_BASE + 0x11)/* BRC 1 */ -#define DCRN_BRCR2 (DCRN_EBIMC_BASE + 0x12)/* BRC 2 */ -#define DCRN_BRCR3 (DCRN_EBIMC_BASE + 0x13)/* BRC 3 */ -#define DCRN_BRCR4 (DCRN_EBIMC_BASE + 0x14)/* BRC 4 */ -#define DCRN_BRCR5 (DCRN_EBIMC_BASE + 0x15)/* BRC 5 */ -#define DCRN_BRCR6 (DCRN_EBIMC_BASE + 0x16)/* BRC 6 */ -#define DCRN_BRCR7 (DCRN_EBIMC_BASE + 0x17)/* BRC 7 */ -#define DCRN_BEAR0 (DCRN_EBIMC_BASE + 0x20)/* Bus Error Address Register */ -#define DCRN_BESR0 (DCRN_EBIMC_BASE + 0x21)/* Bus Error Status Register */ -#define DCRN_BIUCR (DCRN_EBIMC_BASE + 0x2A)/* Bus Interfac Unit Ctrl Reg */ -#endif - -#ifdef DCRN_EXISR_BASE -#define DCRN_EXISR (DCRN_EXISR_BASE + 0x0) /* External Interrupt Status Register */ -#endif -#define EXIER_CIE 0x80000000 /* Critical Interrupt Enable */ -#define EXIER_SRIE 0x08000000 /* Serial Port Rx Int. Enable */ -#define EXIER_STIE 0x04000000 /* Serial Port Tx Int. Enable */ -#define EXIER_JRIE 0x02000000 /* JTAG Serial Port Rx Int. Enable */ -#define EXIER_JTIE 0x01000000 /* JTAG Serial Port Tx Int. Enable */ -#define EXIER_D0IE 0x00800000 /* DMA Channel 0 Interrupt Enable */ -#define EXIER_D1IE 0x00400000 /* DMA Channel 1 Interrupt Enable */ -#define EXIER_D2IE 0x00200000 /* DMA Channel 2 Interrupt Enable */ -#define EXIER_D3IE 0x00100000 /* DMA Channel 3 Interrupt Enable */ -#define EXIER_E0IE 0x00000010 /* External Interrupt 0 Enable */ -#define EXIER_E1IE 0x00000008 /* External Interrupt 1 Enable */ -#define EXIER_E2IE 0x00000004 /* External Interrupt 2 Enable */ -#define EXIER_E3IE 0x00000002 /* External Interrupt 3 Enable */ -#define EXIER_E4IE 0x00000001 /* External Interrupt 4 Enable */ - -#ifdef DCRN_IOCR_BASE -#define DCRN_IOCR (DCRN_IOCR_BASE + 0x0) /* Input/Output Configuration Register */ -#endif -#define IOCR_E0TE 0x80000000 -#define IOCR_E0LP 0x40000000 -#define IOCR_E1TE 0x20000000 -#define IOCR_E1LP 0x10000000 -#define IOCR_E2TE 0x08000000 -#define IOCR_E2LP 0x04000000 -#define IOCR_E3TE 0x02000000 -#define IOCR_E3LP 0x01000000 -#define IOCR_E4TE 0x00800000 -#define IOCR_E4LP 0x00400000 -#define IOCR_EDT 0x00080000 -#define IOCR_SOR 0x00040000 -#define IOCR_EDO 0x00008000 -#define IOCR_2XC 0x00004000 -#define IOCR_ATC 0x00002000 -#define IOCR_SPD 0x00001000 -#define IOCR_BEM 0x00000800 -#define IOCR_PTD 0x00000400 -#define IOCR_ARE 0x00000080 -#define IOCR_DRC 0x00000020 -#define IOCR_RDM(x) (((x) & 0x3) << 3) -#define IOCR_TCS 0x00000004 -#define IOCR_SCS 0x00000002 -#define IOCR_SPC 0x00000001 - -#ifdef DCRN_MAL_BASE -#define DCRN_MALCR (DCRN_MAL_BASE + 0x0) /* MAL Configuration */ -#define DCRN_MALDBR (DCRN_MAL_BASE + 0x3) /* Debug Register */ -#define DCRN_MALESR (DCRN_MAL_BASE + 0x1) /* Error Status */ -#define DCRN_MALIER (DCRN_MAL_BASE + 0x2) /* Interrupt Enable */ -#define DCRN_MALTXCARR (DCRN_MAL_BASE + 0x5) /* TX Channed Active Reset Register */ -#define DCRN_MALTXCASR (DCRN_MAL_BASE + 0x4) /* TX Channel Active Set Register */ -#define DCRN_MALTXDEIR (DCRN_MAL_BASE + 0x7) /* Tx Descriptor Error Interrupt */ -#define DCRN_MALTXEOBISR (DCRN_MAL_BASE + 0x6) /* Tx End of Buffer Interrupt Status */ -#define DCRN_MALRXCARR (DCRN_MAL_BASE + 0x11) /* RX Channed Active Reset Register */ -#define DCRN_MALRXCASR (DCRN_MAL_BASE + 0x10) /* RX Channel Active Set Register */ -#define DCRN_MALRXDEIR (DCRN_MAL_BASE + 0x13) /* Rx Descriptor Error Interrupt */ -#define DCRN_MALRXEOBISR (DCRN_MAL_BASE + 0x12) /* Rx End of Buffer Interrupt Status */ -#define DCRN_MALRXCTP0R (DCRN_MAL_BASE + 0x40) /* Channel Rx 0 Channel Table Pointer */ -#define DCRN_MALTXCTP0R (DCRN_MAL_BASE + 0x20) /* Channel Tx 0 Channel Table Pointer */ -#define DCRN_MALTXCTP1R (DCRN_MAL_BASE + 0x21) /* Channel Tx 1 Channel Table Pointer */ -#define DCRN_MALRCBS0 (DCRN_MAL_BASE + 0x60) /* Channel Rx 0 Channel Buffer Size */ -#endif -/* DCRN_MALCR */ -#define MALCR_MMSR 0x80000000/* MAL Software reset */ -#define MALCR_PLBP_1 0x00400000 /* MAL reqest priority: */ -#define MALCR_PLBP_2 0x00800000 /* lowsest is 00 */ -#define MALCR_PLBP_3 0x00C00000 /* highest */ -#define MALCR_GA 0x00200000 /* Guarded Active Bit */ -#define MALCR_OA 0x00100000 /* Ordered Active Bit */ -#define MALCR_PLBLE 0x00080000 /* PLB Lock Error Bit */ -#define MALCR_PLBLT_1 0x00040000 /* PLB Latency Timer */ -#define MALCR_PLBLT_2 0x00020000 -#define MALCR_PLBLT_3 0x00010000 -#define MALCR_PLBLT_4 0x00008000 -#define MALCR_PLBLT_DEFAULT 0x00078000 /* JSP: Is this a valid default?? */ -#define MALCR_PLBB 0x00004000 /* PLB Burst Deactivation Bit */ -#define MALCR_OPBBL 0x00000080 /* OPB Lock Bit */ -#define MALCR_EOPIE 0x00000004 /* End Of Packet Interrupt Enable */ -#define MALCR_LEA 0x00000002 /* Locked Error Active */ -#define MALCR_MSD 0x00000001 /* MAL Scroll Descriptor Bit */ -/* DCRN_MALESR */ -#define MALESR_EVB 0x80000000 /* Error Valid Bit */ -#define MALESR_CIDRX 0x40000000 /* Channel ID Receive */ -#define MALESR_DE 0x00100000 /* Descriptor Error */ -#define MALESR_OEN 0x00080000 /* OPB Non-Fullword Error */ -#define MALESR_OTE 0x00040000 /* OPB Timeout Error */ -#define MALESR_OSE 0x00020000 /* OPB Slave Error */ -#define MALESR_PEIN 0x00010000 /* PLB Bus Error Indication */ -#define MALESR_DEI 0x00000010 /* Descriptor Error Interrupt */ -#define MALESR_ONEI 0x00000008 /* OPB Non-Fullword Error Interrupt */ -#define MALESR_OTEI 0x00000004 /* OPB Timeout Error Interrupt */ -#define MALESR_OSEI 0x00000002 /* OPB Slace Error Interrupt */ -#define MALESR_PBEI 0x00000001 /* PLB Bus Error Interrupt */ -/* DCRN_MALIER */ -#define MALIER_DE 0x00000010 /* Descriptor Error Interrupt Enable */ -#define MALIER_NE 0x00000008 /* OPB Non-word Transfer Int Enable */ -#define MALIER_TE 0x00000004 /* OPB Time Out Error Interrupt Enable */ -#define MALIER_OPBE 0x00000002 /* OPB Slave Error Interrupt Enable */ -#define MALIER_PLBE 0x00000001 /* PLB Error Interrupt Enable */ -/* DCRN_MALTXEOBISR */ -#define MALOBISR_CH0 0x80000000 /* EOB channel 1 bit */ -#define MALOBISR_CH2 0x40000000 /* EOB channel 2 bit */ - -#ifdef DCRN_OCM0_BASE -#define DCRN_OCMISARC (DCRN_OCM0_BASE + 0x0) /* OCM Instr Side Addr Range Compare */ -#define DCRN_OCMISCR (DCRN_OCM0_BASE + 0x1) /* OCM Instr Side Control */ -#define DCRN_OCMDSARC (DCRN_OCM0_BASE + 0x2) /* OCM Data Side Addr Range Compare */ -#define DCRN_OCMDSCR (DCRN_OCM0_BASE + 0x3) /* OCM Data Side Control */ -#endif - -#ifdef DCRN_PLB0_BASE -#define DCRN_PLB0_BESR (DCRN_PLB0_BASE + 0x0) -#define DCRN_PLB0_BEAR (DCRN_PLB0_BASE + 0x2) -/* doesn't exist on stb03xxx? */ -#define DCRN_PLB0_ACR (DCRN_PLB0_BASE + 0x3) -#endif - -#ifdef DCRN_PLB1_BASE -#define DCRN_PLB1_BESR (DCRN_PLB1_BASE + 0x0) -#define DCRN_PLB1_BEAR (DCRN_PLB1_BASE + 0x1) -/* doesn't exist on stb03xxx? */ -#define DCRN_PLB1_ACR (DCRN_PLB1_BASE + 0x2) -#endif - -#ifdef DCRN_PLLMR_BASE -#define DCRN_PLLMR (DCRN_PLLMR_BASE + 0x0) /* PL1 Mode */ -#endif - -#ifdef DCRN_POB0_BASE -#define DCRN_POB0_BESR0 (DCRN_POB0_BASE + 0x0) -#define DCRN_POB0_BEAR (DCRN_POB0_BASE + 0x2) -#define DCRN_POB0_BESR1 (DCRN_POB0_BASE + 0x4) -#endif - -#ifdef DCRN_SCCR_BASE -#define DCRN_SCCR (DCRN_SCCR_BASE + 0x0) -#endif - -#ifdef DCRN_SDRAM0_BASE -#define DCRN_SDRAM0_CFGADDR (DCRN_SDRAM0_BASE + 0x0) /* Mem Ctrlr Address */ -#define DCRN_SDRAM0_CFGDATA (DCRN_SDRAM0_BASE + 0x1) /* Mem Ctrlr Data */ -#endif - -#ifdef DCRN_UIC0_BASE -#define DCRN_UIC0_SR (DCRN_UIC0_BASE + 0x0) -#define DCRN_UIC0_ER (DCRN_UIC0_BASE + 0x2) -#define DCRN_UIC0_CR (DCRN_UIC0_BASE + 0x3) -#define DCRN_UIC0_PR (DCRN_UIC0_BASE + 0x4) -#define DCRN_UIC0_TR (DCRN_UIC0_BASE + 0x5) -#define DCRN_UIC0_MSR (DCRN_UIC0_BASE + 0x6) -#define DCRN_UIC0_VR (DCRN_UIC0_BASE + 0x7) -#define DCRN_UIC0_VCR (DCRN_UIC0_BASE + 0x8) -#endif - -#ifdef DCRN_UIC1_BASE -#define DCRN_UIC1_SR (DCRN_UIC1_BASE + 0x0) -#define DCRN_UIC1_SRS (DCRN_UIC1_BASE + 0x1) -#define DCRN_UIC1_ER (DCRN_UIC1_BASE + 0x2) -#define DCRN_UIC1_CR (DCRN_UIC1_BASE + 0x3) -#define DCRN_UIC1_PR (DCRN_UIC1_BASE + 0x4) -#define DCRN_UIC1_TR (DCRN_UIC1_BASE + 0x5) -#define DCRN_UIC1_MSR (DCRN_UIC1_BASE + 0x6) -#define DCRN_UIC1_VR (DCRN_UIC1_BASE + 0x7) -#define DCRN_UIC1_VCR (DCRN_UIC1_BASE + 0x8) -#endif - -#ifdef DCRN_SDRAM0_BASE -#define DCRN_SDRAM0_CFGADDR (DCRN_SDRAM0_BASE + 0x0) /* Memory Controller Address */ -#define DCRN_SDRAM0_CFGDATA (DCRN_SDRAM0_BASE + 0x1) /* Memory Controller Data */ -#endif - -#ifdef DCRN_OCM0_BASE -#define DCRN_OCMISARC (DCRN_OCM0_BASE + 0x0) /* OCM Instr Side Addr Range Compare */ -#define DCRN_OCMISCR (DCRN_OCM0_BASE + 0x1) /* OCM Instr Side Control */ -#define DCRN_OCMDSARC (DCRN_OCM0_BASE + 0x2) /* OCM Data Side Addr Range Compare */ -#define DCRN_OCMDSCR (DCRN_OCM0_BASE + 0x3) /* OCM Data Side Control */ -#endif - -#endif /* __ASM_IBM403_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/ibm405.h b/include/asm-ppc/ibm405.h deleted file mode 100644 index 4e5be9e2c153..000000000000 --- a/include/asm-ppc/ibm405.h +++ /dev/null @@ -1,299 +0,0 @@ -/* - * Author: Armin Kuster <akuster@mvista.com> - * - * 2002 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifdef __KERNEL__ -#ifndef __ASM_IBM405_H__ -#define __ASM_IBM405_H__ - -#ifdef DCRN_BE_BASE -#define DCRN_BEAR (DCRN_BE_BASE + 0x0) /* Bus Error Address Register */ -#define DCRN_BESR (DCRN_BE_BASE + 0x1) /* Bus Error Syndrome Register */ -#endif -/* DCRN_BESR */ -#define BESR_DSES 0x80000000 /* Data-Side Error Status */ -#define BESR_DMES 0x40000000 /* DMA Error Status */ -#define BESR_RWS 0x20000000 /* Read/Write Status */ -#define BESR_ETMASK 0x1C000000 /* Error Type */ -#define ET_PROT 0 -#define ET_PARITY 1 -#define ET_NCFG 2 -#define ET_BUSERR 4 -#define ET_BUSTO 6 - -/* Clock and power management shifts for emacs */ -#define IBM_CPM_EMMII 0 /* Shift value for MII */ -#define IBM_CPM_EMRX 1 /* Shift value for recv */ -#define IBM_CPM_EMTX 2 /* Shift value for MAC */ - -#ifdef DCRN_CHCR_BASE -#define DCRN_CHCR0 (DCRN_CHCR_BASE + 0x0) /* Chip Control Register 1 */ -#define DCRN_CHCR1 (DCRN_CHCR_BASE + 0x1) /* Chip Control Register 2 */ -#endif -#define CHR1_PCIPW 0x00008000 /* PCI Int enable/Peripheral Write enable */ - -#ifdef DCRN_CHPSR_BASE -#define DCRN_CHPSR (DCRN_CHPSR_BASE + 0x0) /* Chip Pin Strapping */ -#endif - -#ifdef DCRN_CPMFR_BASE -#define DCRN_CPMFR (DCRN_CPMFR_BASE + 0x0) /* CPM Force */ -#endif - -#ifdef DCRN_CPMSR_BASE -#define DCRN_CPMSR (DCRN_CPMSR_BASE + 0x0) /* CPM Status */ -#define DCRN_CPMER (DCRN_CPMSR_BASE + 0x1) /* CPM Enable */ -#endif - -#ifdef DCRN_DCP0_BASE -/* Decompression Controller Address */ -#define DCRN_DCP0_CFGADDR (DCRN_DCP0_BASE + 0x0) -/* Decompression Controller Data */ -#define DCRN_DCP0_CFGDATA (DCRN_DCP0_BASE + 0x1) -#else -#define DCRN_DCP0_CFGADDR 0x0 -#define DCRN_DCP0_CFGDATA 0x0 -#endif - -#ifdef DCRN_DMA0_BASE -/* DMA Channel Control Register 0 */ -#define DCRN_DMACR0 (DCRN_DMA0_BASE + 0x0) -#define DCRN_DMACT0 (DCRN_DMA0_BASE + 0x1) /* DMA Count Register 0 */ -/* DMA Destination Address Register 0 */ -#define DCRN_DMADA0 (DCRN_DMA0_BASE + 0x2) -/* DMA Source Address Register 0 */ -#define DCRN_DMASA0 (DCRN_DMA0_BASE + 0x3) -#ifdef DCRNCAP_DMA_CC -/* DMA Chained Count Register 0 */ -#define DCRN_DMACC0 (DCRN_DMA0_BASE + 0x4) -#endif -#ifdef DCRNCAP_DMA_SG -/* DMA Scatter/Gather Descriptor Addr 0 */ -#define DCRN_ASG0 (DCRN_DMA0_BASE + 0x4) -#endif -#endif - -#ifdef DCRN_DMA1_BASE -/* DMA Channel Control Register 1 */ -#define DCRN_DMACR1 (DCRN_DMA1_BASE + 0x0) -#define DCRN_DMACT1 (DCRN_DMA1_BASE + 0x1) /* DMA Count Register 1 */ -/* DMA Destination Address Register 1 */ -#define DCRN_DMADA1 (DCRN_DMA1_BASE + 0x2) -/* DMA Source Address Register 1 */ -#define DCRN_DMASA1 (DCRN_DMA1_BASE + 0x3) /* DMA Source Address Register 1 */ -#ifdef DCRNCAP_DMA_CC -/* DMA Chained Count Register 1 */ -#define DCRN_DMACC1 (DCRN_DMA1_BASE + 0x4) -#endif -#ifdef DCRNCAP_DMA_SG -/* DMA Scatter/Gather Descriptor Addr 1 */ -#define DCRN_ASG1 (DCRN_DMA1_BASE + 0x4) -#endif -#endif - -#ifdef DCRN_DMA2_BASE -#define DCRN_DMACR2 (DCRN_DMA2_BASE + 0x0) /* DMA Channel Control Register 2 */ -#define DCRN_DMACT2 (DCRN_DMA2_BASE + 0x1) /* DMA Count Register 2 */ -#define DCRN_DMADA2 (DCRN_DMA2_BASE + 0x2) /* DMA Destination Address Register 2 */ -#define DCRN_DMASA2 (DCRN_DMA2_BASE + 0x3) /* DMA Source Address Register 2 */ -#ifdef DCRNCAP_DMA_CC -#define DCRN_DMACC2 (DCRN_DMA2_BASE + 0x4) /* DMA Chained Count Register 2 */ -#endif -#ifdef DCRNCAP_DMA_SG -#define DCRN_ASG2 (DCRN_DMA2_BASE + 0x4) /* DMA Scatter/Gather Descriptor Addr 2 */ -#endif -#endif - -#ifdef DCRN_DMA3_BASE -#define DCRN_DMACR3 (DCRN_DMA3_BASE + 0x0) /* DMA Channel Control Register 3 */ -#define DCRN_DMACT3 (DCRN_DMA3_BASE + 0x1) /* DMA Count Register 3 */ -#define DCRN_DMADA3 (DCRN_DMA3_BASE + 0x2) /* DMA Destination Address Register 3 */ -#define DCRN_DMASA3 (DCRN_DMA3_BASE + 0x3) /* DMA Source Address Register 3 */ -#ifdef DCRNCAP_DMA_CC -#define DCRN_DMACC3 (DCRN_DMA3_BASE + 0x4) /* DMA Chained Count Register 3 */ -#endif -#ifdef DCRNCAP_DMA_SG -#define DCRN_ASG3 (DCRN_DMA3_BASE + 0x4) /* DMA Scatter/Gather Descriptor Addr 3 */ -#endif -#endif - -#ifdef DCRN_DMASR_BASE -#define DCRN_DMASR (DCRN_DMASR_BASE + 0x0) /* DMA Status Register */ -#ifdef DCRNCAP_DMA_SG -#define DCRN_ASGC (DCRN_DMASR_BASE + 0x3) /* DMA Scatter/Gather Command */ -/* don't know if these two registers always exist if scatter/gather exists */ -#define DCRN_POL (DCRN_DMASR_BASE + 0x6) /* DMA Polarity Register */ -#define DCRN_SLP (DCRN_DMASR_BASE + 0x5) /* DMA Sleep Register */ -#endif -#endif - -#ifdef DCRN_EBC_BASE -#define DCRN_EBCCFGADR (DCRN_EBC_BASE + 0x0) /* Peripheral Controller Address */ -#define DCRN_EBCCFGDATA (DCRN_EBC_BASE + 0x1) /* Peripheral Controller Data */ -#endif - -#ifdef DCRN_EXIER_BASE -#define DCRN_EXIER (DCRN_EXIER_BASE + 0x0) /* External Interrupt Enable Register */ -#endif - -#ifdef DCRN_EXISR_BASE -#define DCRN_EXISR (DCRN_EXISR_BASE + 0x0) /* External Interrupt Status Register */ -#endif - -#define EXIER_CIE 0x80000000 /* Critical Interrupt Enable */ -#define EXIER_SRIE 0x08000000 /* Serial Port Rx Int. Enable */ -#define EXIER_STIE 0x04000000 /* Serial Port Tx Int. Enable */ -#define EXIER_JRIE 0x02000000 /* JTAG Serial Port Rx Int. Enable */ -#define EXIER_JTIE 0x01000000 /* JTAG Serial Port Tx Int. Enable */ -#define EXIER_D0IE 0x00800000 /* DMA Channel 0 Interrupt Enable */ -#define EXIER_D1IE 0x00400000 /* DMA Channel 1 Interrupt Enable */ -#define EXIER_D2IE 0x00200000 /* DMA Channel 2 Interrupt Enable */ -#define EXIER_D3IE 0x00100000 /* DMA Channel 3 Interrupt Enable */ -#define EXIER_E0IE 0x00000010 /* External Interrupt 0 Enable */ -#define EXIER_E1IE 0x00000008 /* External Interrupt 1 Enable */ -#define EXIER_E2IE 0x00000004 /* External Interrupt 2 Enable */ -#define EXIER_E3IE 0x00000002 /* External Interrupt 3 Enable */ -#define EXIER_E4IE 0x00000001 /* External Interrupt 4 Enable */ - -#ifdef DCRN_IOCR_BASE -#define DCRN_IOCR (DCRN_IOCR_BASE + 0x0) /* Input/Output Configuration Register */ -#endif -#define IOCR_E0TE 0x80000000 -#define IOCR_E0LP 0x40000000 -#define IOCR_E1TE 0x20000000 -#define IOCR_E1LP 0x10000000 -#define IOCR_E2TE 0x08000000 -#define IOCR_E2LP 0x04000000 -#define IOCR_E3TE 0x02000000 -#define IOCR_E3LP 0x01000000 -#define IOCR_E4TE 0x00800000 -#define IOCR_E4LP 0x00400000 -#define IOCR_EDT 0x00080000 -#define IOCR_SOR 0x00040000 -#define IOCR_EDO 0x00008000 -#define IOCR_2XC 0x00004000 -#define IOCR_ATC 0x00002000 -#define IOCR_SPD 0x00001000 -#define IOCR_BEM 0x00000800 -#define IOCR_PTD 0x00000400 -#define IOCR_ARE 0x00000080 -#define IOCR_DRC 0x00000020 -#define IOCR_RDM(x) (((x) & 0x3) << 3) -#define IOCR_TCS 0x00000004 -#define IOCR_SCS 0x00000002 -#define IOCR_SPC 0x00000001 - -#define DCRN_MALCR(base) (base + 0x0) /* MAL Configuration */ -#define DCRN_MALDBR(base) ((base) + 0x3) /* Debug Register */ -#define DCRN_MALESR(base) ((base) + 0x1) /* Error Status */ -#define DCRN_MALIER(base) ((base) + 0x2) /* Interrupt Enable */ -#define DCRN_MALTXCARR(base) ((base) + 0x5) /* TX Channed Active Reset Register */ -#define DCRN_MALTXCASR(base) ((base) + 0x4) /* TX Channel Active Set Register */ -#define DCRN_MALTXDEIR(base) ((base) + 0x7) /* Tx Descriptor Error Interrupt */ -#define DCRN_MALTXEOBISR(base) ((base) + 0x6) /* Tx End of Buffer Interrupt Status */ -#define DCRN_MALRXCARR(base) ((base) + 0x11) /* RX Channed Active Reset Register */ -#define DCRN_MALRXCASR(base) ((base) + 0x10) /* RX Channel Active Set Register */ -#define DCRN_MALRXDEIR(base) ((base) + 0x13) /* Rx Descriptor Error Interrupt */ -#define DCRN_MALRXEOBISR(base) ((base) + 0x12) /* Rx End of Buffer Interrupt Status */ -#define DCRN_MALRXCTP0R(base) ((base) + 0x40) /* Channel Rx 0 Channel Table Pointer */ -#define DCRN_MALRXCTP1R(base) ((base) + 0x41) /* Channel Rx 1 Channel Table Pointer */ -#define DCRN_MALTXCTP0R(base) ((base) + 0x20) /* Channel Tx 0 Channel Table Pointer */ -#define DCRN_MALTXCTP1R(base) ((base) + 0x21) /* Channel Tx 1 Channel Table Pointer */ -#define DCRN_MALTXCTP2R(base) ((base) + 0x22) /* Channel Tx 2 Channel Table Pointer */ -#define DCRN_MALTXCTP3R(base) ((base) + 0x23) /* Channel Tx 3 Channel Table Pointer */ -#define DCRN_MALRCBS0(base) ((base) + 0x60) /* Channel Rx 0 Channel Buffer Size */ -#define DCRN_MALRCBS1(base) ((base) + 0x61) /* Channel Rx 1 Channel Buffer Size */ - - /* DCRN_MALCR */ -#define MALCR_MMSR 0x80000000 /* MAL Software reset */ -#define MALCR_PLBP_1 0x00400000 /* MAL reqest priority: */ -#define MALCR_PLBP_2 0x00800000 /* lowsest is 00 */ -#define MALCR_PLBP_3 0x00C00000 /* highest */ -#define MALCR_GA 0x00200000 /* Guarded Active Bit */ -#define MALCR_OA 0x00100000 /* Ordered Active Bit */ -#define MALCR_PLBLE 0x00080000 /* PLB Lock Error Bit */ -#define MALCR_PLBLT_1 0x00040000 /* PLB Latency Timer */ -#define MALCR_PLBLT_2 0x00020000 -#define MALCR_PLBLT_3 0x00010000 -#define MALCR_PLBLT_4 0x00008000 -#define MALCR_PLBLT_DEFAULT 0x00078000 /* JSP: Is this a valid default?? */ -#define MALCR_PLBB 0x00004000 /* PLB Burst Deactivation Bit */ -#define MALCR_OPBBL 0x00000080 /* OPB Lock Bit */ -#define MALCR_EOPIE 0x00000004 /* End Of Packet Interrupt Enable */ -#define MALCR_LEA 0x00000002 /* Locked Error Active */ -#define MALCR_MSD 0x00000001 /* MAL Scroll Descriptor Bit */ -/* DCRN_MALESR */ -#define MALESR_EVB 0x80000000 /* Error Valid Bit */ -#define MALESR_CIDRX 0x40000000 /* Channel ID Receive */ -#define MALESR_DE 0x00100000 /* Descriptor Error */ -#define MALESR_OEN 0x00080000 /* OPB Non-Fullword Error */ -#define MALESR_OTE 0x00040000 /* OPB Timeout Error */ -#define MALESR_OSE 0x00020000 /* OPB Slave Error */ -#define MALESR_PEIN 0x00010000 /* PLB Bus Error Indication */ -#define MALESR_DEI 0x00000010 /* Descriptor Error Interrupt */ -#define MALESR_ONEI 0x00000008 /* OPB Non-Fullword Error Interrupt */ -#define MALESR_OTEI 0x00000004 /* OPB Timeout Error Interrupt */ -#define MALESR_OSEI 0x00000002 /* OPB Slace Error Interrupt */ -#define MALESR_PBEI 0x00000001 /* PLB Bus Error Interrupt */ -/* DCRN_MALIER */ -#define MALIER_DE 0x00000010 /* Descriptor Error Interrupt Enable */ -#define MALIER_NE 0x00000008 /* OPB Non-word Transfer Int Enable */ -#define MALIER_TE 0x00000004 /* OPB Time Out Error Interrupt Enable */ -#define MALIER_OPBE 0x00000002 /* OPB Slave Error Interrupt Enable */ -#define MALIER_PLBE 0x00000001 /* PLB Error Interrupt Enable */ -/* DCRN_MALTXEOBISR */ -#define MALOBISR_CH0 0x80000000 /* EOB channel 1 bit */ -#define MALOBISR_CH2 0x40000000 /* EOB channel 2 bit */ - -#ifdef DCRN_PLB0_BASE -#define DCRN_PLB0_BESR (DCRN_PLB0_BASE + 0x0) -#define DCRN_PLB0_BEAR (DCRN_PLB0_BASE + 0x2) -/* doesn't exist on stb03xxx? */ -#define DCRN_PLB0_ACR (DCRN_PLB0_BASE + 0x3) -#endif - -#ifdef DCRN_PLB1_BASE -#define DCRN_PLB1_BESR (DCRN_PLB1_BASE + 0x0) -#define DCRN_PLB1_BEAR (DCRN_PLB1_BASE + 0x1) -/* doesn't exist on stb03xxx? */ -#define DCRN_PLB1_ACR (DCRN_PLB1_BASE + 0x2) -#endif - -#ifdef DCRN_PLLMR_BASE -#define DCRN_PLLMR (DCRN_PLLMR_BASE + 0x0) /* PL1 Mode */ -#endif - -#ifdef DCRN_POB0_BASE -#define DCRN_POB0_BESR0 (DCRN_POB0_BASE + 0x0) -#define DCRN_POB0_BEAR (DCRN_POB0_BASE + 0x2) -#define DCRN_POB0_BESR1 (DCRN_POB0_BASE + 0x4) -#endif - -#define DCRN_UIC_SR(base) (base + 0x0) -#define DCRN_UIC_ER(base) (base + 0x2) -#define DCRN_UIC_CR(base) (base + 0x3) -#define DCRN_UIC_PR(base) (base + 0x4) -#define DCRN_UIC_TR(base) (base + 0x5) -#define DCRN_UIC_MSR(base) (base + 0x6) -#define DCRN_UIC_VR(base) (base + 0x7) -#define DCRN_UIC_VCR(base) (base + 0x8) - -#ifdef DCRN_SDRAM0_BASE -#define DCRN_SDRAM0_CFGADDR (DCRN_SDRAM0_BASE + 0x0) /* Memory Controller Address */ -#define DCRN_SDRAM0_CFGDATA (DCRN_SDRAM0_BASE + 0x1) /* Memory Controller Data */ -#endif - -#ifdef DCRN_OCM0_BASE -#define DCRN_OCMISARC (DCRN_OCM0_BASE + 0x0) /* OCM Instr Side Addr Range Compare */ -#define DCRN_OCMISCR (DCRN_OCM0_BASE + 0x1) /* OCM Instr Side Control */ -#define DCRN_OCMDSARC (DCRN_OCM0_BASE + 0x2) /* OCM Data Side Addr Range Compare */ -#define DCRN_OCMDSCR (DCRN_OCM0_BASE + 0x3) /* OCM Data Side Control */ -#endif - -#endif /* __ASM_IBM405_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/ibm44x.h b/include/asm-ppc/ibm44x.h deleted file mode 100644 index 7818b54b6e37..000000000000 --- a/include/asm-ppc/ibm44x.h +++ /dev/null @@ -1,674 +0,0 @@ -/* - * include/asm-ppc/ibm44x.h - * - * PPC44x definitions - * - * Matt Porter <mporter@kernel.crashing.org> - * - * Copyright 2002-2005 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifdef __KERNEL__ -#ifndef __ASM_IBM44x_H__ -#define __ASM_IBM44x_H__ - - -#ifndef NR_BOARD_IRQS -#define NR_BOARD_IRQS 0 -#endif - -#define _IO_BASE isa_io_base -#define _ISA_MEM_BASE isa_mem_base -#define PCI_DRAM_OFFSET pci_dram_offset - -/* TLB entry offset/size used for pinning kernel lowmem */ -#define PPC44x_PIN_SHIFT 28 -#define PPC_PIN_SIZE (1 << PPC44x_PIN_SHIFT) - -/* Lowest TLB slot consumed by the default pinned TLBs */ -#define PPC44x_LOW_SLOT 63 - -/* - * Least significant 32-bits and extended real page number (ERPN) of - * UART0 physical address location for early serial text debug - */ -#if defined(CONFIG_440SP) -#define UART0_PHYS_ERPN 1 -#define UART0_PHYS_IO_BASE 0xf0000200 -#elif defined(CONFIG_440SPE) -#define UART0_PHYS_ERPN 4 -#define UART0_PHYS_IO_BASE 0xf0000200 -#elif defined(CONFIG_440EP) -#define UART0_PHYS_IO_BASE 0xe0000000 -#else -#define UART0_PHYS_ERPN 1 -#define UART0_PHYS_IO_BASE 0x40000200 -#endif - -/* - * XXX This 36-bit trap stuff will move somewhere in syslib/ - * when we rework/abstract the PPC44x PCI-X handling -mdp - */ - -/* - * Standard 4GB "page" definitions - */ -#if defined(CONFIG_440SP) -#define PPC44x_IO_PAGE 0x0000000100000000ULL -#define PPC44x_PCICFG_PAGE 0x0000000900000000ULL -#define PPC44x_PCIIO_PAGE PPC44x_PCICFG_PAGE -#define PPC44x_PCIMEM_PAGE 0x0000000a00000000ULL -#elif defined(CONFIG_440SPE) -#define PPC44x_IO_PAGE 0x0000000400000000ULL -#define PPC44x_PCICFG_PAGE 0x0000000c00000000ULL -#define PPC44x_PCIIO_PAGE PPC44x_PCICFG_PAGE -#define PPC44x_PCIMEM_PAGE 0x0000000d00000000ULL -#elif defined(CONFIG_440EP) -#define PPC44x_IO_PAGE 0x0000000000000000ULL -#define PPC44x_PCICFG_PAGE 0x0000000000000000ULL -#define PPC44x_PCIIO_PAGE PPC44x_PCICFG_PAGE -#define PPC44x_PCIMEM_PAGE 0x0000000000000000ULL -#else -#define PPC44x_IO_PAGE 0x0000000100000000ULL -#define PPC44x_PCICFG_PAGE 0x0000000200000000ULL -#define PPC44x_PCIIO_PAGE PPC44x_PCICFG_PAGE -#define PPC44x_PCIMEM_PAGE 0x0000000300000000ULL -#endif - -/* - * 36-bit trap ranges - */ -#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) -#define PPC44x_IO_LO 0xf0000000UL -#define PPC44x_IO_HI 0xf0000fffUL -#define PPC44x_PCI0CFG_LO 0x0ec00000UL -#define PPC44x_PCI0CFG_HI 0x0ec00007UL -#define PPC44x_PCI1CFG_LO 0x1ec00000UL -#define PPC44x_PCI1CFG_HI 0x1ec00007UL -#define PPC44x_PCI2CFG_LO 0x2ec00000UL -#define PPC44x_PCI2CFG_HI 0x2ec00007UL -#define PPC44x_PCIMEM_LO 0x80000000UL -#define PPC44x_PCIMEM_HI 0xdfffffffUL -#elif defined(CONFIG_440EP) -#define PPC44x_IO_LO 0xef500000UL -#define PPC44x_IO_HI 0xefffffffUL -#define PPC44x_PCI0CFG_LO 0xeec00000UL -#define PPC44x_PCI0CFG_HI 0xeecfffffUL -#define PPC44x_PCIMEM_LO 0xa0000000UL -#define PPC44x_PCIMEM_HI 0xdfffffffUL -#else -#define PPC44x_IO_LO 0x40000000UL -#define PPC44x_IO_HI 0x40000fffUL -#define PPC44x_PCI0CFG_LO 0x0ec00000UL -#define PPC44x_PCI0CFG_HI 0x0ec00007UL -#define PPC44x_PCIMEM_LO 0x80002000UL -#define PPC44x_PCIMEM_HI 0xffffffffUL -#endif - -/* - * The "residual" board information structure the boot loader passes - * into the kernel. - */ -#ifndef __ASSEMBLY__ - -/* - * DCRN definitions - */ - - -/* CPRs (440GX and 440SP/440SPe) */ -#define DCRN_CPR_CONFIG_ADDR 0xc -#define DCRN_CPR_CONFIG_DATA 0xd - -#define DCRN_CPR_CLKUPD 0x0020 -#define DCRN_CPR_PLLC 0x0040 -#define DCRN_CPR_PLLD 0x0060 -#define DCRN_CPR_PRIMAD 0x0080 -#define DCRN_CPR_PRIMBD 0x00a0 -#define DCRN_CPR_OPBD 0x00c0 -#define DCRN_CPR_PERD 0x00e0 -#define DCRN_CPR_MALD 0x0100 - -/* CPRs read/write helper macros */ -#define CPR_READ(offset) ({\ - mtdcr(DCRN_CPR_CONFIG_ADDR, offset); \ - mfdcr(DCRN_CPR_CONFIG_DATA);}) -#define CPR_WRITE(offset, data) ({\ - mtdcr(DCRN_CPR_CONFIG_ADDR, offset); \ - mtdcr(DCRN_CPR_CONFIG_DATA, data);}) - -/* SDRs (440GX and 440SP/440SPe) */ -#define DCRN_SDR_CONFIG_ADDR 0xe -#define DCRN_SDR_CONFIG_DATA 0xf -#define DCRN_SDR_PFC0 0x4100 -#define DCRN_SDR_PFC1 0x4101 -#define DCRN_SDR_PFC1_EPS 0x1c00000 -#define DCRN_SDR_PFC1_EPS_SHIFT 22 -#define DCRN_SDR_PFC1_RMII 0x02000000 -#define DCRN_SDR_MFR 0x4300 -#define DCRN_SDR_MFR_TAH0 0x80000000 /* TAHOE0 Enable */ -#define DCRN_SDR_MFR_TAH1 0x40000000 /* TAHOE1 Enable */ -#define DCRN_SDR_MFR_PCM 0x10000000 /* PPC440GP irq compat mode */ -#define DCRN_SDR_MFR_ECS 0x08000000 /* EMAC int clk */ -#define DCRN_SDR_MFR_T0TXFL 0x00080000 -#define DCRN_SDR_MFR_T0TXFH 0x00040000 -#define DCRN_SDR_MFR_T1TXFL 0x00020000 -#define DCRN_SDR_MFR_T1TXFH 0x00010000 -#define DCRN_SDR_MFR_E0TXFL 0x00008000 -#define DCRN_SDR_MFR_E0TXFH 0x00004000 -#define DCRN_SDR_MFR_E0RXFL 0x00002000 -#define DCRN_SDR_MFR_E0RXFH 0x00001000 -#define DCRN_SDR_MFR_E1TXFL 0x00000800 -#define DCRN_SDR_MFR_E1TXFH 0x00000400 -#define DCRN_SDR_MFR_E1RXFL 0x00000200 -#define DCRN_SDR_MFR_E1RXFH 0x00000100 -#define DCRN_SDR_MFR_E2TXFL 0x00000080 -#define DCRN_SDR_MFR_E2TXFH 0x00000040 -#define DCRN_SDR_MFR_E2RXFL 0x00000020 -#define DCRN_SDR_MFR_E2RXFH 0x00000010 -#define DCRN_SDR_MFR_E3TXFL 0x00000008 -#define DCRN_SDR_MFR_E3TXFH 0x00000004 -#define DCRN_SDR_MFR_E3RXFL 0x00000002 -#define DCRN_SDR_MFR_E3RXFH 0x00000001 -#define DCRN_SDR_UART0 0x0120 -#define DCRN_SDR_UART1 0x0121 - -#ifdef CONFIG_440EP -#define DCRN_SDR_UART2 0x0122 -#define DCRN_SDR_UART3 0x0123 -#define DCRN_SDR_CUST0 0x4000 -#endif - -/* SDR read/write helper macros */ -#define SDR_READ(offset) ({\ - mtdcr(DCRN_SDR_CONFIG_ADDR, offset); \ - mfdcr(DCRN_SDR_CONFIG_DATA);}) -#define SDR_WRITE(offset, data) ({\ - mtdcr(DCRN_SDR_CONFIG_ADDR, offset); \ - mtdcr(DCRN_SDR_CONFIG_DATA,data);}) - -/* DMA (excluding 440SP/440SPe) */ -#define DCRN_DMA0_BASE 0x100 -#define DCRN_DMA1_BASE 0x108 -#define DCRN_DMA2_BASE 0x110 -#define DCRN_DMA3_BASE 0x118 -#define DCRN_DMASR_BASE 0x120 -#define DCRNCAP_DMA_SG 1 /* have DMA scatter/gather capability */ -#define DCRN_MAL_BASE 0x180 - -#ifdef CONFIG_440EP -#define DCRN_DMA2P40_BASE 0x300 -#define DCRN_DMA2P41_BASE 0x308 -#define DCRN_DMA2P42_BASE 0x310 -#define DCRN_DMA2P43_BASE 0x318 -#define DCRN_DMA2P4SR_BASE 0x320 -#endif - -/* UIC */ -#define DCRN_UIC0_BASE 0xc0 -#define DCRN_UIC1_BASE 0xd0 -#define UIC0 DCRN_UIC0_BASE -#define UIC1 DCRN_UIC1_BASE - -#ifdef CONFIG_440SPE -#define DCRN_UIC2_BASE 0xe0 -#define DCRN_UIC3_BASE 0xf0 -#define UIC2 DCRN_UIC2_BASE -#define UIC3 DCRN_UIC3_BASE -#else -#define DCRN_UIC2_BASE 0x210 -#define DCRN_UICB_BASE 0x200 -#define UIC2 DCRN_UIC2_BASE -#define UICB DCRN_UICB_BASE -#endif - -#define DCRN_UIC_SR(base) (base + 0x0) -#define DCRN_UIC_ER(base) (base + 0x2) -#define DCRN_UIC_CR(base) (base + 0x3) -#define DCRN_UIC_PR(base) (base + 0x4) -#define DCRN_UIC_TR(base) (base + 0x5) -#define DCRN_UIC_MSR(base) (base + 0x6) -#define DCRN_UIC_VR(base) (base + 0x7) -#define DCRN_UIC_VCR(base) (base + 0x8) - -#define UIC0_UIC1NC 0x00000002 - -#ifdef CONFIG_440SPE -#define UIC0_UIC1NC 0x00000002 -#define UIC0_UIC2NC 0x00200000 -#define UIC0_UIC3NC 0x00008000 -#endif - -#define UICB_UIC0NC 0x40000000 -#define UICB_UIC1NC 0x10000000 -#define UICB_UIC2NC 0x04000000 - -/* 440 MAL DCRs */ -#define DCRN_MALCR(base) (base + 0x0) /* Configuration */ -#define DCRN_MALESR(base) (base + 0x1) /* Error Status */ -#define DCRN_MALIER(base) (base + 0x2) /* Interrupt Enable */ -#define DCRN_MALTXCASR(base) (base + 0x4) /* Tx Channel Active Set */ -#define DCRN_MALTXCARR(base) (base + 0x5) /* Tx Channel Active Reset */ -#define DCRN_MALTXEOBISR(base) (base + 0x6) /* Tx End of Buffer Interrupt Status */ -#define DCRN_MALTXDEIR(base) (base + 0x7) /* Tx Descriptor Error Interrupt */ -#define DCRN_MALRXCASR(base) (base + 0x10) /* Rx Channel Active Set */ -#define DCRN_MALRXCARR(base) (base + 0x11) /* Rx Channel Active Reset */ -#define DCRN_MALRXEOBISR(base) (base + 0x12) /* Rx End of Buffer Interrupt Status */ -#define DCRN_MALRXDEIR(base) (base + 0x13) /* Rx Descriptor Error Interrupt */ -#define DCRN_MALTXCTP0R(base) (base + 0x20) /* Channel Tx 0 Channel Table Pointer */ -#define DCRN_MALTXCTP1R(base) (base + 0x21) /* Channel Tx 1 Channel Table Pointer */ -#define DCRN_MALTXCTP2R(base) (base + 0x22) /* Channel Tx 2 Channel Table Pointer */ -#define DCRN_MALTXCTP3R(base) (base + 0x23) /* Channel Tx 3 Channel Table Pointer */ -#define DCRN_MALRXCTP0R(base) (base + 0x40) /* Channel Rx 0 Channel Table Pointer */ -#define DCRN_MALRXCTP1R(base) (base + 0x41) /* Channel Rx 1 Channel Table Pointer */ -#define DCRN_MALRCBS0(base) (base + 0x60) /* Channel Rx 0 Channel Buffer Size */ -#define DCRN_MALRCBS1(base) (base + 0x61) /* Channel Rx 1 Channel Buffer Size */ - -/* Compatibility DCRN's */ -#define DCRN_MALRXCTP2R(base) ((base) + 0x42) /* Channel Rx 2 Channel Table Pointer */ -#define DCRN_MALRXCTP3R(base) ((base) + 0x43) /* Channel Rx 3 Channel Table Pointer */ -#define DCRN_MALTXCTP4R(base) ((base) + 0x24) /* Channel Tx 4 Channel Table Pointer */ -#define DCRN_MALTXCTP5R(base) ((base) + 0x25) /* Channel Tx 5 Channel Table Pointer */ -#define DCRN_MALTXCTP6R(base) ((base) + 0x26) /* Channel Tx 6 Channel Table Pointer */ -#define DCRN_MALTXCTP7R(base) ((base) + 0x27) /* Channel Tx 7 Channel Table Pointer */ -#define DCRN_MALRCBS2(base) ((base) + 0x62) /* Channel Rx 2 Channel Buffer Size */ -#define DCRN_MALRCBS3(base) ((base) + 0x63) /* Channel Rx 3 Channel Buffer Size */ - -#define MALCR_MMSR 0x80000000 /* MAL Software reset */ -#define MALCR_PLBP_1 0x00400000 /* MAL reqest priority: */ -#define MALCR_PLBP_2 0x00800000 /* lowsest is 00 */ -#define MALCR_PLBP_3 0x00C00000 /* highest */ -#define MALCR_GA 0x00200000 /* Guarded Active Bit */ -#define MALCR_OA 0x00100000 /* Ordered Active Bit */ -#define MALCR_PLBLE 0x00080000 /* PLB Lock Error Bit */ -#define MALCR_PLBLT_1 0x00040000 /* PLB Latency Timer */ -#define MALCR_PLBLT_2 0x00020000 -#define MALCR_PLBLT_3 0x00010000 -#define MALCR_PLBLT_4 0x00008000 -#ifdef CONFIG_440GP -#define MALCR_PLBLT_DEFAULT 0x00330000 /* PLB Latency Timer default */ -#else -#define MALCR_PLBLT_DEFAULT 0x00ff0000 /* PLB Latency Timer default */ -#endif -#define MALCR_PLBB 0x00004000 /* PLB Burst Deactivation Bit */ -#define MALCR_OPBBL 0x00000080 /* OPB Lock Bit */ -#define MALCR_EOPIE 0x00000004 /* End Of Packet Interrupt Enable */ -#define MALCR_LEA 0x00000002 /* Locked Error Active */ -#define MALCR_MSD 0x00000001 /* MAL Scroll Descriptor Bit */ -/* DCRN_MALESR */ -#define MALESR_EVB 0x80000000 /* Error Valid Bit */ -#define MALESR_CIDRX 0x40000000 /* Channel ID Receive */ -#define MALESR_DE 0x00100000 /* Descriptor Error */ -#define MALESR_OEN 0x00080000 /* OPB Non-Fullword Error */ -#define MALESR_OTE 0x00040000 /* OPB Timeout Error */ -#define MALESR_OSE 0x00020000 /* OPB Slave Error */ -#define MALESR_PEIN 0x00010000 /* PLB Bus Error Indication */ -#define MALESR_DEI 0x00000010 /* Descriptor Error Interrupt */ -#define MALESR_ONEI 0x00000008 /* OPB Non-Fullword Error Interrupt */ -#define MALESR_OTEI 0x00000004 /* OPB Timeout Error Interrupt */ -#define MALESR_OSEI 0x00000002 /* OPB Slace Error Interrupt */ -#define MALESR_PBEI 0x00000001 /* PLB Bus Error Interrupt */ -/* DCRN_MALIER */ -#define MALIER_DE 0x00000010 /* Descriptor Error Interrupt Enable */ -#define MALIER_NE 0x00000008 /* OPB Non-word Transfer Int Enable */ -#define MALIER_TE 0x00000004 /* OPB Time Out Error Interrupt Enable */ -#define MALIER_OPBE 0x00000002 /* OPB Slave Error Interrupt Enable */ -#define MALIER_PLBE 0x00000001 /* PLB Error Interrupt Enable */ -/* DCRN_MALTXEOBISR */ -#define MALOBISR_CH0 0x80000000 /* EOB channel 1 bit */ -#define MALOBISR_CH2 0x40000000 /* EOB channel 2 bit */ - -#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) -/* 440SP/440SPe PLB Arbiter DCRs */ -#define DCRN_PLB_REVID 0x080 /* PLB Revision ID */ -#define DCRN_PLB_CCR 0x088 /* PLB Crossbar Control */ - -#define DCRN_PLB0_ACR 0x081 /* PLB Arbiter Control */ -#define DCRN_PLB0_BESRL 0x082 /* PLB Error Status */ -#define DCRN_PLB0_BESRH 0x083 /* PLB Error Status */ -#define DCRN_PLB0_BEARL 0x084 /* PLB Error Address Low */ -#define DCRN_PLB0_BEARH 0x085 /* PLB Error Address High */ - -#define DCRN_PLB1_ACR 0x089 /* PLB Arbiter Control */ -#define DCRN_PLB1_BESRL 0x08a /* PLB Error Status */ -#define DCRN_PLB1_BESRH 0x08b /* PLB Error Status */ -#define DCRN_PLB1_BEARL 0x08c /* PLB Error Address Low */ -#define DCRN_PLB1_BEARH 0x08d /* PLB Error Address High */ -#else -/* 440GP/GX PLB Arbiter DCRs */ -#define DCRN_PLB0_REVID 0x082 /* PLB Arbiter Revision ID */ -#define DCRN_PLB0_ACR 0x083 /* PLB Arbiter Control */ -#define DCRN_PLB0_BESR 0x084 /* PLB Error Status */ -#define DCRN_PLB0_BEARL 0x086 /* PLB Error Address Low */ -#define DCRN_PLB0_BEAR DCRN_PLB0_BEARL /* 40x compatibility */ -#define DCRN_PLB0_BEARH 0x087 /* PLB Error Address High */ -#endif - -/* 440GP/GX PLB to OPB bridge DCRs */ -#define DCRN_POB0_BESR0 0x090 -#define DCRN_POB0_BESR1 0x094 -#define DCRN_POB0_BEARL 0x092 -#define DCRN_POB0_BEARH 0x093 - -/* 440GP/GX OPB to PLB bridge DCRs */ -#define DCRN_OPB0_BSTAT 0x0a9 -#define DCRN_OPB0_BEARL 0x0aa -#define DCRN_OPB0_BEARH 0x0ab - -/* 440GP Clock, PM, chip control */ -#define DCRN_CPC0_SR 0x0b0 -#define DCRN_CPC0_ER 0x0b1 -#define DCRN_CPC0_FR 0x0b2 -#define DCRN_CPC0_SYS0 0x0e0 -#define DCRN_CPC0_SYS1 0x0e1 -#define DCRN_CPC0_CUST0 0x0e2 -#define DCRN_CPC0_CUST1 0x0e3 -#define DCRN_CPC0_STRP0 0x0e4 -#define DCRN_CPC0_STRP1 0x0e5 -#define DCRN_CPC0_STRP2 0x0e6 -#define DCRN_CPC0_STRP3 0x0e7 -#define DCRN_CPC0_GPIO 0x0e8 -#define DCRN_CPC0_PLB 0x0e9 -#define DCRN_CPC0_CR1 0x0ea -#define DCRN_CPC0_CR0 0x0eb -#define DCRN_CPC0_MIRQ0 0x0ec -#define DCRN_CPC0_MIRQ1 0x0ed -#define DCRN_CPC0_JTAGID 0x0ef - -/* 440GP DMA controller DCRs */ -#define DCRN_DMACR0 (DCRN_DMA0_BASE + 0x0) /* DMA Channel Control 0 */ -#define DCRN_DMACT0 (DCRN_DMA0_BASE + 0x1) /* DMA Count 0 */ -#define DCRN_DMASAH0 (DCRN_DMA0_BASE + 0x2) /* DMA Src Addr High 0 */ -#define DCRN_DMASA0 (DCRN_DMA0_BASE + 0x3) /* DMA Src Addr Low 0 */ -#define DCRN_DMADAH0 (DCRN_DMA0_BASE + 0x4) /* DMA Dest Addr High 0 */ -#define DCRN_DMADA0 (DCRN_DMA0_BASE + 0x5) /* DMA Dest Addr Low 0 */ -#define DCRN_ASGH0 (DCRN_DMA0_BASE + 0x6) /* DMA SG Desc Addr High 0 */ -#define DCRN_ASG0 (DCRN_DMA0_BASE + 0x7) /* DMA SG Desc Addr Low 0 */ - -#define DCRN_DMACR1 (DCRN_DMA1_BASE + 0x0) /* DMA Channel Control 1 */ -#define DCRN_DMACT1 (DCRN_DMA1_BASE + 0x1) /* DMA Count 1 */ -#define DCRN_DMASAH1 (DCRN_DMA1_BASE + 0x2) /* DMA Src Addr High 1 */ -#define DCRN_DMASA1 (DCRN_DMA1_BASE + 0x3) /* DMA Src Addr Low 1 */ -#define DCRN_DMADAH1 (DCRN_DMA1_BASE + 0x4) /* DMA Dest Addr High 1 */ -#define DCRN_DMADA1 (DCRN_DMA1_BASE + 0x5) /* DMA Dest Addr Low 1 */ -#define DCRN_ASGH1 (DCRN_DMA1_BASE + 0x6) /* DMA SG Desc Addr High 1 */ -#define DCRN_ASG1 (DCRN_DMA1_BASE + 0x7) /* DMA SG Desc Addr Low 1 */ - -#define DCRN_DMACR2 (DCRN_DMA2_BASE + 0x0) /* DMA Channel Control 2 */ -#define DCRN_DMACT2 (DCRN_DMA2_BASE + 0x1) /* DMA Count 2 */ -#define DCRN_DMASAH2 (DCRN_DMA2_BASE + 0x2) /* DMA Src Addr High 2 */ -#define DCRN_DMASA2 (DCRN_DMA2_BASE + 0x3) /* DMA Src Addr Low 2 */ -#define DCRN_DMADAH2 (DCRN_DMA2_BASE + 0x4) /* DMA Dest Addr High 2 */ -#define DCRN_DMADA2 (DCRN_DMA2_BASE + 0x5) /* DMA Dest Addr Low 2 */ -#define DCRN_ASGH2 (DCRN_DMA2_BASE + 0x6) /* DMA SG Desc Addr High 2 */ -#define DCRN_ASG2 (DCRN_DMA2_BASE + 0x7) /* DMA SG Desc Addr Low 2 */ - -#define DCRN_DMACR3 (DCRN_DMA3_BASE + 0x0) /* DMA Channel Control 3 */ -#define DCRN_DMACT3 (DCRN_DMA3_BASE + 0x1) /* DMA Count 3 */ -#define DCRN_DMASAH3 (DCRN_DMA3_BASE + 0x2) /* DMA Src Addr High 3 */ -#define DCRN_DMASA3 (DCRN_DMA3_BASE + 0x3) /* DMA Src Addr Low 3 */ -#define DCRN_DMADAH3 (DCRN_DMA3_BASE + 0x4) /* DMA Dest Addr High 3 */ -#define DCRN_DMADA3 (DCRN_DMA3_BASE + 0x5) /* DMA Dest Addr Low 3 */ -#define DCRN_ASGH3 (DCRN_DMA3_BASE + 0x6) /* DMA SG Desc Addr High 3 */ -#define DCRN_ASG3 (DCRN_DMA3_BASE + 0x7) /* DMA SG Desc Addr Low 3 */ - -#define DCRN_DMASR (DCRN_DMASR_BASE + 0x0) /* DMA Status Register */ -#define DCRN_ASGC (DCRN_DMASR_BASE + 0x3) /* DMA Scatter/Gather Command */ -#define DCRN_SLP (DCRN_DMASR_BASE + 0x5) /* DMA Sleep Register */ -#define DCRN_POL (DCRN_DMASR_BASE + 0x6) /* DMA Polarity Register */ - -/* 440GP/440GX SDRAM controller DCRs */ -#define DCRN_SDRAM0_CFGADDR 0x010 -#define DCRN_SDRAM0_CFGDATA 0x011 - -#define SDRAM0_B0CR 0x40 -#define SDRAM0_B1CR 0x44 -#define SDRAM0_B2CR 0x48 -#define SDRAM0_B3CR 0x4c - -#define SDRAM_CONFIG_BANK_ENABLE 0x00000001 -#define SDRAM_CONFIG_SIZE_MASK 0x000e0000 -#define SDRAM_CONFIG_BANK_SIZE(reg) ((reg & SDRAM_CONFIG_SIZE_MASK) >> 17) -#define SDRAM_CONFIG_SIZE_8M 0x00000001 -#define SDRAM_CONFIG_SIZE_16M 0x00000002 -#define SDRAM_CONFIG_SIZE_32M 0x00000003 -#define SDRAM_CONFIG_SIZE_64M 0x00000004 -#define SDRAM_CONFIG_SIZE_128M 0x00000005 -#define SDRAM_CONFIG_SIZE_256M 0x00000006 -#define SDRAM_CONFIG_SIZE_512M 0x00000007 -#define PPC44x_MEM_SIZE_8M 0x00800000 -#define PPC44x_MEM_SIZE_16M 0x01000000 -#define PPC44x_MEM_SIZE_32M 0x02000000 -#define PPC44x_MEM_SIZE_64M 0x04000000 -#define PPC44x_MEM_SIZE_128M 0x08000000 -#define PPC44x_MEM_SIZE_256M 0x10000000 -#define PPC44x_MEM_SIZE_512M 0x20000000 -#define PPC44x_MEM_SIZE_1G 0x40000000 -#define PPC44x_MEM_SIZE_2G 0x80000000 - -/* 440SP/440SPe memory controller DCRs */ -#define DCRN_MQ0_BS0BAS 0x40 -#if defined(CONFIG_440SP) -#define MQ0_NUM_BANKS 2 -#elif defined(CONFIG_440SPE) -#define MQ0_NUM_BANKS 4 -#endif - -#define MQ0_CONFIG_SIZE_MASK 0x0000fff0 -#define MQ0_CONFIG_SIZE_8M 0x0000ffc0 -#define MQ0_CONFIG_SIZE_16M 0x0000ff80 -#define MQ0_CONFIG_SIZE_32M 0x0000ff00 -#define MQ0_CONFIG_SIZE_64M 0x0000fe00 -#define MQ0_CONFIG_SIZE_128M 0x0000fc00 -#define MQ0_CONFIG_SIZE_256M 0x0000f800 -#define MQ0_CONFIG_SIZE_512M 0x0000f000 -#define MQ0_CONFIG_SIZE_1G 0x0000e000 -#define MQ0_CONFIG_SIZE_2G 0x0000c000 -#define MQ0_CONFIG_SIZE_4G 0x00008000 - -/* Internal SRAM Controller 440GX/440SP/440SPe */ -#define DCRN_SRAM0_BASE 0x000 - -#define DCRN_SRAM0_SB0CR (DCRN_SRAM0_BASE + 0x020) -#define DCRN_SRAM0_SB1CR (DCRN_SRAM0_BASE + 0x021) -#define DCRN_SRAM0_SB2CR (DCRN_SRAM0_BASE + 0x022) -#define DCRN_SRAM0_SB3CR (DCRN_SRAM0_BASE + 0x023) -#define SRAM_SBCR_BAS0 0x80000000 -#define SRAM_SBCR_BAS1 0x80010000 -#define SRAM_SBCR_BAS2 0x80020000 -#define SRAM_SBCR_BAS3 0x80030000 -#define SRAM_SBCR_BU_MASK 0x00000180 -#define SRAM_SBCR_BS_64KB 0x00000800 -#define SRAM_SBCR_BU_RO 0x00000080 -#define SRAM_SBCR_BU_RW 0x00000180 -#define DCRN_SRAM0_BEAR (DCRN_SRAM0_BASE + 0x024) -#define DCRN_SRAM0_BESR0 (DCRN_SRAM0_BASE + 0x025) -#define DCRN_SRAM0_BESR1 (DCRN_SRAM0_BASE + 0x026) -#define DCRN_SRAM0_PMEG (DCRN_SRAM0_BASE + 0x027) -#define DCRN_SRAM0_CID (DCRN_SRAM0_BASE + 0x028) -#define DCRN_SRAM0_REVID (DCRN_SRAM0_BASE + 0x029) -#define DCRN_SRAM0_DPC (DCRN_SRAM0_BASE + 0x02a) -#define SRAM_DPC_ENABLE 0x80000000 - -/* L2 Cache Controller 440GX/440SP/440SPe */ -#define DCRN_L2C0_CFG 0x030 -#define L2C_CFG_L2M 0x80000000 -#define L2C_CFG_ICU 0x40000000 -#define L2C_CFG_DCU 0x20000000 -#define L2C_CFG_DCW_MASK 0x1e000000 -#define L2C_CFG_TPC 0x01000000 -#define L2C_CFG_CPC 0x00800000 -#define L2C_CFG_FRAN 0x00200000 -#define L2C_CFG_SS_MASK 0x00180000 -#define L2C_CFG_SS_256 0x00000000 -#define L2C_CFG_CPIM 0x00040000 -#define L2C_CFG_TPIM 0x00020000 -#define L2C_CFG_LIM 0x00010000 -#define L2C_CFG_PMUX_MASK 0x00007000 -#define L2C_CFG_PMUX_SNP 0x00000000 -#define L2C_CFG_PMUX_IF 0x00001000 -#define L2C_CFG_PMUX_DF 0x00002000 -#define L2C_CFG_PMUX_DS 0x00003000 -#define L2C_CFG_PMIM 0x00000800 -#define L2C_CFG_TPEI 0x00000400 -#define L2C_CFG_CPEI 0x00000200 -#define L2C_CFG_NAM 0x00000100 -#define L2C_CFG_SMCM 0x00000080 -#define L2C_CFG_NBRM 0x00000040 -#define DCRN_L2C0_CMD 0x031 -#define L2C_CMD_CLR 0x80000000 -#define L2C_CMD_DIAG 0x40000000 -#define L2C_CMD_INV 0x20000000 -#define L2C_CMD_CCP 0x10000000 -#define L2C_CMD_CTE 0x08000000 -#define L2C_CMD_STRC 0x04000000 -#define L2C_CMD_STPC 0x02000000 -#define L2C_CMD_RPMC 0x01000000 -#define L2C_CMD_HCC 0x00800000 -#define DCRN_L2C0_ADDR 0x032 -#define DCRN_L2C0_DATA 0x033 -#define DCRN_L2C0_SR 0x034 -#define L2C_SR_CC 0x80000000 -#define L2C_SR_CPE 0x40000000 -#define L2C_SR_TPE 0x20000000 -#define L2C_SR_LRU 0x10000000 -#define L2C_SR_PCS 0x08000000 -#define DCRN_L2C0_REVID 0x035 -#define DCRN_L2C0_SNP0 0x036 -#define DCRN_L2C0_SNP1 0x037 -#define L2C_SNP_BA_MASK 0xffff0000 -#define L2C_SNP_SSR_MASK 0x0000f000 -#define L2C_SNP_SSR_32G 0x0000f000 -#define L2C_SNP_ESR 0x00000800 - -/* - * PCI-X definitions - */ -#define PCIX0_CFGA 0x0ec00000UL -#define PCIX1_CFGA 0x1ec00000UL -#define PCIX2_CFGA 0x2ec00000UL -#define PCIX0_CFGD 0x0ec00004UL -#define PCIX1_CFGD 0x1ec00004UL -#define PCIX2_CFGD 0x2ec00004UL - -#define PCIX0_IO_BASE 0x0000000908000000ULL -#define PCIX1_IO_BASE 0x0000000908000000ULL -#define PCIX2_IO_BASE 0x0000000908000000ULL -#define PCIX_IO_SIZE 0x00010000 - -#ifdef CONFIG_440SP -#define PCIX0_REG_BASE 0x000000090ec80000ULL -#else -#define PCIX0_REG_BASE 0x000000020ec80000ULL -#endif -#define PCIX_REG_OFFSET 0x10000000 -#define PCIX_REG_SIZE 0x200 - -#define PCIX0_VENDID 0x000 -#define PCIX0_DEVID 0x002 -#define PCIX0_COMMAND 0x004 -#define PCIX0_STATUS 0x006 -#define PCIX0_REVID 0x008 -#define PCIX0_CLS 0x009 -#define PCIX0_CACHELS 0x00c -#define PCIX0_LATTIM 0x00d -#define PCIX0_HDTYPE 0x00e -#define PCIX0_BIST 0x00f -#define PCIX0_BAR0L 0x010 -#define PCIX0_BAR0H 0x014 -#define PCIX0_BAR1 0x018 -#define PCIX0_BAR2L 0x01c -#define PCIX0_BAR2H 0x020 -#define PCIX0_BAR3 0x024 -#define PCIX0_CISPTR 0x028 -#define PCIX0_SBSYSVID 0x02c -#define PCIX0_SBSYSID 0x02e -#define PCIX0_EROMBA 0x030 -#define PCIX0_CAP 0x034 -#define PCIX0_RES0 0x035 -#define PCIX0_RES1 0x036 -#define PCIX0_RES2 0x038 -#define PCIX0_INTLN 0x03c -#define PCIX0_INTPN 0x03d -#define PCIX0_MINGNT 0x03e -#define PCIX0_MAXLTNCY 0x03f -#define PCIX0_BRDGOPT1 0x040 -#define PCIX0_BRDGOPT2 0x044 -#define PCIX0_ERREN 0x050 -#define PCIX0_ERRSTS 0x054 -#define PCIX0_PLBBESR 0x058 -#define PCIX0_PLBBEARL 0x05c -#define PCIX0_PLBBEARH 0x060 -#define PCIX0_POM0LAL 0x068 -#define PCIX0_POM0LAH 0x06c -#define PCIX0_POM0SA 0x070 -#define PCIX0_POM0PCIAL 0x074 -#define PCIX0_POM0PCIAH 0x078 -#define PCIX0_POM1LAL 0x07c -#define PCIX0_POM1LAH 0x080 -#define PCIX0_POM1SA 0x084 -#define PCIX0_POM1PCIAL 0x088 -#define PCIX0_POM1PCIAH 0x08c -#define PCIX0_POM2SA 0x090 -#define PCIX0_PIM0SAL 0x098 -#define PCIX0_PIM0SA PCIX0_PIM0SAL -#define PCIX0_PIM0LAL 0x09c -#define PCIX0_PIM0LAH 0x0a0 -#define PCIX0_PIM1SA 0x0a4 -#define PCIX0_PIM1LAL 0x0a8 -#define PCIX0_PIM1LAH 0x0ac -#define PCIX0_PIM2SAL 0x0b0 -#define PCIX0_PIM2SA PCIX0_PIM2SAL -#define PCIX0_PIM2LAL 0x0b4 -#define PCIX0_PIM2LAH 0x0b8 -#define PCIX0_OMCAPID 0x0c0 -#define PCIX0_OMNIPTR 0x0c1 -#define PCIX0_OMMC 0x0c2 -#define PCIX0_OMMA 0x0c4 -#define PCIX0_OMMUA 0x0c8 -#define PCIX0_OMMDATA 0x0cc -#define PCIX0_OMMEOI 0x0ce -#define PCIX0_PMCAPID 0x0d0 -#define PCIX0_PMNIPTR 0x0d1 -#define PCIX0_PMC 0x0d2 -#define PCIX0_PMCSR 0x0d4 -#define PCIX0_PMCSRBSE 0x0d6 -#define PCIX0_PMDATA 0x0d7 -#define PCIX0_PMSCRR 0x0d8 -#define PCIX0_CAPID 0x0dc -#define PCIX0_NIPTR 0x0dd -#define PCIX0_CMD 0x0de -#define PCIX0_STS 0x0e0 -#define PCIX0_IDR 0x0e4 -#define PCIX0_CID 0x0e8 -#define PCIX0_RID 0x0ec -#define PCIX0_PIM0SAH 0x0f8 -#define PCIX0_PIM2SAH 0x0fc -#define PCIX0_MSGIL 0x100 -#define PCIX0_MSGIH 0x104 -#define PCIX0_MSGOL 0x108 -#define PCIX0_MSGOH 0x10c -#define PCIX0_IM 0x1f8 - -#define IIC_OWN 0x55 -#define IIC_CLOCK 50 - -#undef NR_UICS -#if defined(CONFIG_440GX) -#define NR_UICS 3 -#elif defined(CONFIG_440SPE) -#define NR_UICS 4 -#else -#define NR_UICS 2 -#endif - -#include <asm/ibm4xx.h> - -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_IBM44x_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/ibm4xx.h b/include/asm-ppc/ibm4xx.h deleted file mode 100644 index ed6891af05d3..000000000000 --- a/include/asm-ppc/ibm4xx.h +++ /dev/null @@ -1,124 +0,0 @@ -/* - * - * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu> - * - * Module name: ibm4xx.h - * - * Description: - * A generic include file which pulls in appropriate include files - * for specific board types based on configuration settings. - * - */ - -#ifdef __KERNEL__ -#ifndef __ASM_IBM4XX_H__ -#define __ASM_IBM4XX_H__ - -#include <asm/types.h> -#include <asm/dcr.h> - -#ifdef CONFIG_40x - -#if defined(CONFIG_BUBINGA) -#include <platforms/4xx/bubinga.h> -#endif - -#if defined(CONFIG_CPCI405) -#include <platforms/4xx/cpci405.h> -#endif - -#if defined(CONFIG_EP405) -#include <platforms/4xx/ep405.h> -#endif - -#if defined(CONFIG_REDWOOD_5) -#include <platforms/4xx/redwood5.h> -#endif - -#if defined(CONFIG_REDWOOD_6) -#include <platforms/4xx/redwood6.h> -#endif - -#if defined(CONFIG_SYCAMORE) -#include <platforms/4xx/sycamore.h> -#endif - -#if defined(CONFIG_WALNUT) -#include <platforms/4xx/walnut.h> -#endif - -#if defined(CONFIG_XILINX_VIRTEX) -#include <platforms/4xx/virtex.h> -#endif - -#ifndef __ASSEMBLY__ - -#ifdef CONFIG_40x -/* - * The "residual" board information structure the boot loader passes - * into the kernel. - */ -extern bd_t __res; -#endif - -void ppc4xx_setup_arch(void); -void ppc4xx_map_io(void); -void ppc4xx_init_IRQ(void); -void ppc4xx_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7); -#endif - -#ifndef PPC4xx_MACHINE_NAME -#define PPC4xx_MACHINE_NAME "Unidentified 4xx class" -#endif - - -/* IO_BASE is for PCI I/O. - * ISA not supported, just here to resolve copilation. - */ - -#ifndef _IO_BASE -#define _IO_BASE 0xe8000000 /* The PCI address window */ -#define _ISA_MEM_BASE 0 -#define PCI_DRAM_OFFSET 0 -#endif - -#elif defined(CONFIG_44x) - -#if defined(CONFIG_BAMBOO) -#include <platforms/4xx/bamboo.h> -#endif - -#if defined(CONFIG_EBONY) -#include <platforms/4xx/ebony.h> -#endif - -#if defined(CONFIG_LUAN) -#include <platforms/4xx/luan.h> -#endif - -#if defined(CONFIG_YUCCA) -#include <platforms/4xx/yucca.h> -#endif - -#if defined(CONFIG_OCOTEA) -#include <platforms/4xx/ocotea.h> -#endif - -#if defined(CONFIG_TAISHAN) -#include <platforms/4xx/taishan.h> -#endif - -#ifndef __ASSEMBLY__ -#ifdef CONFIG_40x -/* - * The "residual" board information structure the boot loader passes - * into the kernel. - */ -extern bd_t __res; -#endif -#endif -#endif /* CONFIG_40x */ - -#endif /* __ASM_IBM4XX_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/ibm_ocp.h b/include/asm-ppc/ibm_ocp.h deleted file mode 100644 index ddce616f765a..000000000000 --- a/include/asm-ppc/ibm_ocp.h +++ /dev/null @@ -1,204 +0,0 @@ -/* - * ibm_ocp.h - * - * (c) Benjamin Herrenschmidt (benh@kernel.crashing.org) - * Mipsys - France - * - * Derived from work (c) Armin Kuster akuster@pacbell.net - * - * Additional support and port to 2.6 LDM/sysfs by - * Matt Porter <mporter@kernel.crashing.org> - * Copyright 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ -#ifdef __KERNEL__ -#ifndef __IBM_OCP_H__ -#define __IBM_OCP_H__ - -#include <asm/types.h> - -/* - * IBM 4xx OCP system information - */ -struct ocp_sys_info_data { - int opb_bus_freq; /* OPB Bus Frequency (Hz) */ - int ebc_bus_freq; /* EBC Bus Frequency (Hz) */ -}; - -extern struct ocp_sys_info_data ocp_sys_info; - -/* - * EMAC additional data and sysfs support - * - * Note about mdio_idx: When you have a zmii, it's usually - * not necessary, it covers the case of the 405EP which has - * the MDIO lines on EMAC0 only - * - * Note about phy_map: Per EMAC map of PHY ids which should - * be probed by emac_probe. Different EMACs can have - * overlapping maps. - * - * Note, this map uses inverse logic for bits: - * 0 - id should be probed - * 1 - id should be ignored - * - * Default value of 0x00000000 - will result in usual - * auto-detection logic. - * - */ - -struct ocp_func_emac_data { - int rgmii_idx; /* RGMII device index or -1 */ - int rgmii_mux; /* RGMII input of this EMAC */ - int zmii_idx; /* ZMII device index or -1 */ - int zmii_mux; /* ZMII input of this EMAC */ - int mal_idx; /* MAL device index */ - int mal_rx_chan; /* MAL rx channel number */ - int mal_tx_chan; /* MAL tx channel number */ - int wol_irq; /* WOL interrupt */ - int mdio_idx; /* EMAC idx of MDIO master or -1 */ - int tah_idx; /* TAH device index or -1 */ - int phy_mode; /* PHY type or configurable mode */ - u8 mac_addr[6]; /* EMAC mac address */ - u32 phy_map; /* EMAC phy map */ - u32 phy_feat_exc; /* Excluded PHY features */ -}; - -/* Sysfs support */ -#define OCP_SYSFS_EMAC_DATA() \ -OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, rgmii_idx) \ -OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, rgmii_mux) \ -OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, zmii_idx) \ -OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, zmii_mux) \ -OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_idx) \ -OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_rx_chan) \ -OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mal_tx_chan) \ -OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, wol_irq) \ -OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, mdio_idx) \ -OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, tah_idx) \ -OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "%d\n", emac, phy_mode) \ -OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "0x%08x\n", emac, phy_map) \ -OCP_SYSFS_ADDTL(struct ocp_func_emac_data, "0x%08x\n", emac, phy_feat_exc)\ - \ -void ocp_show_emac_data(struct device *dev) \ -{ \ - device_create_file(dev, &dev_attr_emac_rgmii_idx); \ - device_create_file(dev, &dev_attr_emac_rgmii_mux); \ - device_create_file(dev, &dev_attr_emac_zmii_idx); \ - device_create_file(dev, &dev_attr_emac_zmii_mux); \ - device_create_file(dev, &dev_attr_emac_mal_idx); \ - device_create_file(dev, &dev_attr_emac_mal_rx_chan); \ - device_create_file(dev, &dev_attr_emac_mal_tx_chan); \ - device_create_file(dev, &dev_attr_emac_wol_irq); \ - device_create_file(dev, &dev_attr_emac_mdio_idx); \ - device_create_file(dev, &dev_attr_emac_tah_idx); \ - device_create_file(dev, &dev_attr_emac_phy_mode); \ - device_create_file(dev, &dev_attr_emac_phy_map); \ - device_create_file(dev, &dev_attr_emac_phy_feat_exc); \ -} - -/* - * PHY mode settings (EMAC <-> ZMII/RGMII bridge <-> PHY) - */ -#define PHY_MODE_NA 0 -#define PHY_MODE_MII 1 -#define PHY_MODE_RMII 2 -#define PHY_MODE_SMII 3 -#define PHY_MODE_RGMII 4 -#define PHY_MODE_TBI 5 -#define PHY_MODE_GMII 6 -#define PHY_MODE_RTBI 7 -#define PHY_MODE_SGMII 8 - -#ifdef CONFIG_40x -/* - * Helper function to copy MAC addresses from the bd_t to OCP EMAC - * additions. - * - * The range of EMAC indices (inclusive) to be copied are the arguments. - */ -static inline void ibm_ocp_set_emac(int start, int end) -{ - int i; - struct ocp_def *def; - - /* Copy MAC addresses to EMAC additions */ - for (i=start; i<=end; i++) { - def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i); - if (i == 0) - memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr, - __res.bi_enetaddr, 6); -#if defined(CONFIG_405EP) || defined(CONFIG_44x) - else if (i == 1) - memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr, - __res.bi_enet1addr, 6); -#endif -#if defined(CONFIG_440GX) - else if (i == 2) - memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr, - __res.bi_enet2addr, 6); - else if (i == 3) - memcpy(((struct ocp_func_emac_data *)def->additions)->mac_addr, - __res.bi_enet3addr, 6); -#endif - } -} -#endif - -/* - * MAL additional data and sysfs support - */ -struct ocp_func_mal_data { - int num_tx_chans; /* Number of TX channels */ - int num_rx_chans; /* Number of RX channels */ - int txeob_irq; /* TX End Of Buffer IRQ */ - int rxeob_irq; /* RX End Of Buffer IRQ */ - int txde_irq; /* TX Descriptor Error IRQ */ - int rxde_irq; /* RX Descriptor Error IRQ */ - int serr_irq; /* MAL System Error IRQ */ - int dcr_base; /* MALx_CFG DCR number */ -}; - -#define OCP_SYSFS_MAL_DATA() \ -OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, num_tx_chans) \ -OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, num_rx_chans) \ -OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, txeob_irq) \ -OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, rxeob_irq) \ -OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, txde_irq) \ -OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, rxde_irq) \ -OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, serr_irq) \ -OCP_SYSFS_ADDTL(struct ocp_func_mal_data, "%d\n", mal, dcr_base) \ - \ -void ocp_show_mal_data(struct device *dev) \ -{ \ - device_create_file(dev, &dev_attr_mal_num_tx_chans); \ - device_create_file(dev, &dev_attr_mal_num_rx_chans); \ - device_create_file(dev, &dev_attr_mal_txeob_irq); \ - device_create_file(dev, &dev_attr_mal_rxeob_irq); \ - device_create_file(dev, &dev_attr_mal_txde_irq); \ - device_create_file(dev, &dev_attr_mal_rxde_irq); \ - device_create_file(dev, &dev_attr_mal_serr_irq); \ - device_create_file(dev, &dev_attr_mal_dcr_base); \ -} - -/* - * IIC additional data and sysfs support - */ -struct ocp_func_iic_data { - int fast_mode; /* IIC fast mode enabled */ -}; - -#define OCP_SYSFS_IIC_DATA() \ -OCP_SYSFS_ADDTL(struct ocp_func_iic_data, "%d\n", iic, fast_mode) \ - \ -void ocp_show_iic_data(struct device *dev) \ -{ \ - device_create_file(dev, &dev_attr_iic_fast_mode); \ -} -#endif /* __IBM_OCP_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/ibm_ocp_pci.h b/include/asm-ppc/ibm_ocp_pci.h deleted file mode 100644 index a81ab6144358..000000000000 --- a/include/asm-ppc/ibm_ocp_pci.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Author: Armin Kuster <akuster@mvista.com> - * - * 2001-2002 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifdef __KERNEL__ -#ifndef __ASM_IBM_OCP_PCI_H__ -#define __ASM_IBM_OCP_PCI_H__ - -/* PCI 32 */ - -struct pmm_regs { - u32 la; - u32 ma; - u32 pcila; - u32 pciha; -}; - -typedef struct pcil0_regs { - struct pmm_regs pmm[3]; - u32 ptm1ms; - u32 ptm1la; - u32 ptm2ms; - u32 ptm2la; -} pci0_t; - -#endif /* __ASM_IBM_OCP_PCI_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/immap_cpm2.h b/include/asm-ppc/immap_cpm2.h deleted file mode 100644 index 3c23d9cb47a6..000000000000 --- a/include/asm-ppc/immap_cpm2.h +++ /dev/null @@ -1,648 +0,0 @@ -/* - * CPM2 Internal Memory Map - * Copyright (c) 1999 Dan Malek (dmalek@jlc.net) - * - * The Internal Memory Map for devices with CPM2 on them. This - * is the superset of all CPM2 devices (8260, 8266, 8280, 8272, - * 8560). - */ -#ifdef __KERNEL__ -#ifndef __IMMAP_CPM2__ -#define __IMMAP_CPM2__ - -/* System configuration registers. -*/ -typedef struct sys_82xx_conf { - u32 sc_siumcr; - u32 sc_sypcr; - u8 res1[6]; - u16 sc_swsr; - u8 res2[20]; - u32 sc_bcr; - u8 sc_ppc_acr; - u8 res3[3]; - u32 sc_ppc_alrh; - u32 sc_ppc_alrl; - u8 sc_lcl_acr; - u8 res4[3]; - u32 sc_lcl_alrh; - u32 sc_lcl_alrl; - u32 sc_tescr1; - u32 sc_tescr2; - u32 sc_ltescr1; - u32 sc_ltescr2; - u32 sc_pdtea; - u8 sc_pdtem; - u8 res5[3]; - u32 sc_ldtea; - u8 sc_ldtem; - u8 res6[163]; -} sysconf_82xx_cpm2_t; - -typedef struct sys_85xx_conf { - u32 sc_cear; - u16 sc_ceer; - u16 sc_cemr; - u8 res1[70]; - u32 sc_smaer; - u8 res2[4]; - u32 sc_smevr; - u32 sc_smctr; - u32 sc_lmaer; - u8 res3[4]; - u32 sc_lmevr; - u32 sc_lmctr; - u8 res4[144]; -} sysconf_85xx_cpm2_t; - -typedef union sys_conf { - sysconf_82xx_cpm2_t siu_82xx; - sysconf_85xx_cpm2_t siu_85xx; -} sysconf_cpm2_t; - - - -/* Memory controller registers. -*/ -typedef struct mem_ctlr { - u32 memc_br0; - u32 memc_or0; - u32 memc_br1; - u32 memc_or1; - u32 memc_br2; - u32 memc_or2; - u32 memc_br3; - u32 memc_or3; - u32 memc_br4; - u32 memc_or4; - u32 memc_br5; - u32 memc_or5; - u32 memc_br6; - u32 memc_or6; - u32 memc_br7; - u32 memc_or7; - u32 memc_br8; - u32 memc_or8; - u32 memc_br9; - u32 memc_or9; - u32 memc_br10; - u32 memc_or10; - u32 memc_br11; - u32 memc_or11; - u8 res1[8]; - u32 memc_mar; - u8 res2[4]; - u32 memc_mamr; - u32 memc_mbmr; - u32 memc_mcmr; - u8 res3[8]; - u16 memc_mptpr; - u8 res4[2]; - u32 memc_mdr; - u8 res5[4]; - u32 memc_psdmr; - u32 memc_lsdmr; - u8 memc_purt; - u8 res6[3]; - u8 memc_psrt; - u8 res7[3]; - u8 memc_lurt; - u8 res8[3]; - u8 memc_lsrt; - u8 res9[3]; - u32 memc_immr; - u32 memc_pcibr0; - u32 memc_pcibr1; - u8 res10[16]; - u32 memc_pcimsk0; - u32 memc_pcimsk1; - u8 res11[52]; -} memctl_cpm2_t; - -/* System Integration Timers. -*/ -typedef struct sys_int_timers { - u8 res1[32]; - u16 sit_tmcntsc; - u8 res2[2]; - u32 sit_tmcnt; - u8 res3[4]; - u32 sit_tmcntal; - u8 res4[16]; - u16 sit_piscr; - u8 res5[2]; - u32 sit_pitc; - u32 sit_pitr; - u8 res6[94]; - u8 res7[390]; -} sit_cpm2_t; - -#define PISCR_PIRQ_MASK ((u16)0xff00) -#define PISCR_PS ((u16)0x0080) -#define PISCR_PIE ((u16)0x0004) -#define PISCR_PTF ((u16)0x0002) -#define PISCR_PTE ((u16)0x0001) - -/* PCI Controller. -*/ -typedef struct pci_ctlr { - u32 pci_omisr; - u32 pci_omimr; - u8 res1[8]; - u32 pci_ifqpr; - u32 pci_ofqpr; - u8 res2[8]; - u32 pci_imr0; - u32 pci_imr1; - u32 pci_omr0; - u32 pci_omr1; - u32 pci_odr; - u8 res3[4]; - u32 pci_idr; - u8 res4[20]; - u32 pci_imisr; - u32 pci_imimr; - u8 res5[24]; - u32 pci_ifhpr; - u8 res6[4]; - u32 pci_iftpr; - u8 res7[4]; - u32 pci_iphpr; - u8 res8[4]; - u32 pci_iptpr; - u8 res9[4]; - u32 pci_ofhpr; - u8 res10[4]; - u32 pci_oftpr; - u8 res11[4]; - u32 pci_ophpr; - u8 res12[4]; - u32 pci_optpr; - u8 res13[8]; - u32 pci_mucr; - u8 res14[8]; - u32 pci_qbar; - u8 res15[12]; - u32 pci_dmamr0; - u32 pci_dmasr0; - u32 pci_dmacdar0; - u8 res16[4]; - u32 pci_dmasar0; - u8 res17[4]; - u32 pci_dmadar0; - u8 res18[4]; - u32 pci_dmabcr0; - u32 pci_dmandar0; - u8 res19[86]; - u32 pci_dmamr1; - u32 pci_dmasr1; - u32 pci_dmacdar1; - u8 res20[4]; - u32 pci_dmasar1; - u8 res21[4]; - u32 pci_dmadar1; - u8 res22[4]; - u32 pci_dmabcr1; - u32 pci_dmandar1; - u8 res23[88]; - u32 pci_dmamr2; - u32 pci_dmasr2; - u32 pci_dmacdar2; - u8 res24[4]; - u32 pci_dmasar2; - u8 res25[4]; - u32 pci_dmadar2; - u8 res26[4]; - u32 pci_dmabcr2; - u32 pci_dmandar2; - u8 res27[88]; - u32 pci_dmamr3; - u32 pci_dmasr3; - u32 pci_dmacdar3; - u8 res28[4]; - u32 pci_dmasar3; - u8 res29[4]; - u32 pci_dmadar3; - u8 res30[4]; - u32 pci_dmabcr3; - u32 pci_dmandar3; - u8 res31[344]; - u32 pci_potar0; - u8 res32[4]; - u32 pci_pobar0; - u8 res33[4]; - u32 pci_pocmr0; - u8 res34[4]; - u32 pci_potar1; - u8 res35[4]; - u32 pci_pobar1; - u8 res36[4]; - u32 pci_pocmr1; - u8 res37[4]; - u32 pci_potar2; - u8 res38[4]; - u32 pci_pobar2; - u8 res39[4]; - u32 pci_pocmr2; - u8 res40[50]; - u32 pci_ptcr; - u32 pci_gpcr; - u32 pci_gcr; - u32 pci_esr; - u32 pci_emr; - u32 pci_ecr; - u32 pci_eacr; - u8 res41[4]; - u32 pci_edcr; - u8 res42[4]; - u32 pci_eccr; - u8 res43[44]; - u32 pci_pitar1; - u8 res44[4]; - u32 pci_pibar1; - u8 res45[4]; - u32 pci_picmr1; - u8 res46[4]; - u32 pci_pitar0; - u8 res47[4]; - u32 pci_pibar0; - u8 res48[4]; - u32 pci_picmr0; - u8 res49[4]; - u32 pci_cfg_addr; - u32 pci_cfg_data; - u32 pci_int_ack; - u8 res50[756]; -} pci_cpm2_t; - -/* Interrupt Controller. -*/ -typedef struct interrupt_controller { - u16 ic_sicr; - u8 res1[2]; - u32 ic_sivec; - u32 ic_sipnrh; - u32 ic_sipnrl; - u32 ic_siprr; - u32 ic_scprrh; - u32 ic_scprrl; - u32 ic_simrh; - u32 ic_simrl; - u32 ic_siexr; - u8 res2[88]; -} intctl_cpm2_t; - -/* Clocks and Reset. -*/ -typedef struct clk_and_reset { - u32 car_sccr; - u8 res1[4]; - u32 car_scmr; - u8 res2[4]; - u32 car_rsr; - u32 car_rmr; - u8 res[104]; -} car_cpm2_t; - -/* Input/Output Port control/status registers. - * Names consistent with processor manual, although they are different - * from the original 8xx names....... - */ -typedef struct io_port { - u32 iop_pdira; - u32 iop_ppara; - u32 iop_psora; - u32 iop_podra; - u32 iop_pdata; - u8 res1[12]; - u32 iop_pdirb; - u32 iop_pparb; - u32 iop_psorb; - u32 iop_podrb; - u32 iop_pdatb; - u8 res2[12]; - u32 iop_pdirc; - u32 iop_pparc; - u32 iop_psorc; - u32 iop_podrc; - u32 iop_pdatc; - u8 res3[12]; - u32 iop_pdird; - u32 iop_ppard; - u32 iop_psord; - u32 iop_podrd; - u32 iop_pdatd; - u8 res4[12]; -} iop_cpm2_t; - -/* Communication Processor Module Timers -*/ -typedef struct cpm_timers { - u8 cpmt_tgcr1; - u8 res1[3]; - u8 cpmt_tgcr2; - u8 res2[11]; - u16 cpmt_tmr1; - u16 cpmt_tmr2; - u16 cpmt_trr1; - u16 cpmt_trr2; - u16 cpmt_tcr1; - u16 cpmt_tcr2; - u16 cpmt_tcn1; - u16 cpmt_tcn2; - u16 cpmt_tmr3; - u16 cpmt_tmr4; - u16 cpmt_trr3; - u16 cpmt_trr4; - u16 cpmt_tcr3; - u16 cpmt_tcr4; - u16 cpmt_tcn3; - u16 cpmt_tcn4; - u16 cpmt_ter1; - u16 cpmt_ter2; - u16 cpmt_ter3; - u16 cpmt_ter4; - u8 res3[584]; -} cpmtimer_cpm2_t; - -/* DMA control/status registers. -*/ -typedef struct sdma_csr { - u8 res0[24]; - u8 sdma_sdsr; - u8 res1[3]; - u8 sdma_sdmr; - u8 res2[3]; - u8 sdma_idsr1; - u8 res3[3]; - u8 sdma_idmr1; - u8 res4[3]; - u8 sdma_idsr2; - u8 res5[3]; - u8 sdma_idmr2; - u8 res6[3]; - u8 sdma_idsr3; - u8 res7[3]; - u8 sdma_idmr3; - u8 res8[3]; - u8 sdma_idsr4; - u8 res9[3]; - u8 sdma_idmr4; - u8 res10[707]; -} sdma_cpm2_t; - -/* Fast controllers -*/ -typedef struct fcc { - u32 fcc_gfmr; - u32 fcc_fpsmr; - u16 fcc_ftodr; - u8 res1[2]; - u16 fcc_fdsr; - u8 res2[2]; - u16 fcc_fcce; - u8 res3[2]; - u16 fcc_fccm; - u8 res4[2]; - u8 fcc_fccs; - u8 res5[3]; - u8 fcc_ftirr_phy[4]; -} fcc_t; - -/* Fast controllers continued - */ -typedef struct fcc_c { - u32 fcc_firper; - u32 fcc_firer; - u32 fcc_firsr_hi; - u32 fcc_firsr_lo; - u8 fcc_gfemr; - u8 res1[15]; -} fcc_c_t; - -/* TC Layer - */ -typedef struct tclayer { - u16 tc_tcmode; - u16 tc_cdsmr; - u16 tc_tcer; - u16 tc_rcc; - u16 tc_tcmr; - u16 tc_fcc; - u16 tc_ccc; - u16 tc_icc; - u16 tc_tcc; - u16 tc_ecc; - u8 res1[12]; -} tclayer_t; - - -/* I2C -*/ -typedef struct i2c { - u8 i2c_i2mod; - u8 res1[3]; - u8 i2c_i2add; - u8 res2[3]; - u8 i2c_i2brg; - u8 res3[3]; - u8 i2c_i2com; - u8 res4[3]; - u8 i2c_i2cer; - u8 res5[3]; - u8 i2c_i2cmr; - u8 res6[331]; -} i2c_cpm2_t; - -typedef struct scc { /* Serial communication channels */ - u32 scc_gsmrl; - u32 scc_gsmrh; - u16 scc_psmr; - u8 res1[2]; - u16 scc_todr; - u16 scc_dsr; - u16 scc_scce; - u8 res2[2]; - u16 scc_sccm; - u8 res3; - u8 scc_sccs; - u8 res4[8]; -} scc_t; - -typedef struct smc { /* Serial management channels */ - u8 res1[2]; - u16 smc_smcmr; - u8 res2[2]; - u8 smc_smce; - u8 res3[3]; - u8 smc_smcm; - u8 res4[5]; -} smc_t; - -/* Serial Peripheral Interface. -*/ -typedef struct spi_ctrl { - u16 spi_spmode; - u8 res1[4]; - u8 spi_spie; - u8 res2[3]; - u8 spi_spim; - u8 res3[2]; - u8 spi_spcom; - u8 res4[82]; -} spictl_cpm2_t; - -/* CPM Mux. -*/ -typedef struct cpmux { - u8 cmx_si1cr; - u8 res1; - u8 cmx_si2cr; - u8 res2; - u32 cmx_fcr; - u32 cmx_scr; - u8 cmx_smr; - u8 res3; - u16 cmx_uar; - u8 res4[16]; -} cpmux_t; - -/* SIRAM control -*/ -typedef struct siram { - u16 si_amr; - u16 si_bmr; - u16 si_cmr; - u16 si_dmr; - u8 si_gmr; - u8 res1; - u8 si_cmdr; - u8 res2; - u8 si_str; - u8 res3; - u16 si_rsr; -} siramctl_t; - -typedef struct mcc { - u16 mcc_mcce; - u8 res1[2]; - u16 mcc_mccm; - u8 res2[2]; - u8 mcc_mccf; - u8 res3[7]; -} mcc_t; - -typedef struct comm_proc { - u32 cp_cpcr; - u32 cp_rccr; - u8 res1[14]; - u16 cp_rter; - u8 res2[2]; - u16 cp_rtmr; - u16 cp_rtscr; - u8 res3[2]; - u32 cp_rtsr; - u8 res4[12]; -} cpm_cpm2_t; - -/* USB Controller. -*/ -typedef struct usb_ctlr { - u8 usb_usmod; - u8 usb_usadr; - u8 usb_uscom; - u8 res1[1]; - u16 usb_usep1; - u16 usb_usep2; - u16 usb_usep3; - u16 usb_usep4; - u8 res2[4]; - u16 usb_usber; - u8 res3[2]; - u16 usb_usbmr; - u8 usb_usbs; - u8 res4[7]; -} usb_cpm2_t; - -/* ...and the whole thing wrapped up.... -*/ - -typedef struct immap { - /* Some references are into the unique and known dpram spaces, - * others are from the generic base. - */ -#define im_dprambase im_dpram1 - u8 im_dpram1[16*1024]; - u8 res1[16*1024]; - u8 im_dpram2[4*1024]; - u8 res2[8*1024]; - u8 im_dpram3[4*1024]; - u8 res3[16*1024]; - - sysconf_cpm2_t im_siu_conf; /* SIU Configuration */ - memctl_cpm2_t im_memctl; /* Memory Controller */ - sit_cpm2_t im_sit; /* System Integration Timers */ - pci_cpm2_t im_pci; /* PCI Controller */ - intctl_cpm2_t im_intctl; /* Interrupt Controller */ - car_cpm2_t im_clkrst; /* Clocks and reset */ - iop_cpm2_t im_ioport; /* IO Port control/status */ - cpmtimer_cpm2_t im_cpmtimer; /* CPM timers */ - sdma_cpm2_t im_sdma; /* SDMA control/status */ - - fcc_t im_fcc[3]; /* Three FCCs */ - u8 res4z[32]; - fcc_c_t im_fcc_c[3]; /* Continued FCCs */ - - u8 res4[32]; - - tclayer_t im_tclayer[8]; /* Eight TCLayers */ - u16 tc_tcgsr; - u16 tc_tcger; - - /* First set of baud rate generators. - */ - u8 res[236]; - u32 im_brgc5; - u32 im_brgc6; - u32 im_brgc7; - u32 im_brgc8; - - u8 res5[608]; - - i2c_cpm2_t im_i2c; /* I2C control/status */ - cpm_cpm2_t im_cpm; /* Communication processor */ - - /* Second set of baud rate generators. - */ - u32 im_brgc1; - u32 im_brgc2; - u32 im_brgc3; - u32 im_brgc4; - - scc_t im_scc[4]; /* Four SCCs */ - smc_t im_smc[2]; /* Couple of SMCs */ - spictl_cpm2_t im_spi; /* A SPI */ - cpmux_t im_cpmux; /* CPM clock route mux */ - siramctl_t im_siramctl1; /* First SI RAM Control */ - mcc_t im_mcc1; /* First MCC */ - siramctl_t im_siramctl2; /* Second SI RAM Control */ - mcc_t im_mcc2; /* Second MCC */ - usb_cpm2_t im_usb; /* USB Controller */ - - u8 res6[1153]; - - u16 im_si1txram[256]; - u8 res7[512]; - u16 im_si1rxram[256]; - u8 res8[512]; - u16 im_si2txram[256]; - u8 res9[512]; - u16 im_si2rxram[256]; - u8 res10[512]; - u8 res11[4096]; -} cpm2_map_t; - -extern cpm2_map_t *cpm2_immr; - -#endif /* __IMMAP_CPM2__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h deleted file mode 100644 index a0d409a5d80f..000000000000 --- a/include/asm-ppc/io.h +++ /dev/null @@ -1,502 +0,0 @@ -#ifdef __KERNEL__ -#ifndef _PPC_IO_H -#define _PPC_IO_H - -#include <linux/string.h> -#include <linux/types.h> - -#include <asm/page.h> -#include <asm/byteorder.h> -#include <asm/synch.h> -#include <asm/mmu.h> - -#define SIO_CONFIG_RA 0x398 -#define SIO_CONFIG_RD 0x399 - -#define SLOW_DOWN_IO - -#define PMAC_ISA_MEM_BASE 0 -#define PMAC_PCI_DRAM_OFFSET 0 -#define CHRP_ISA_IO_BASE 0xf8000000 -#define CHRP_ISA_MEM_BASE 0xf7000000 -#define CHRP_PCI_DRAM_OFFSET 0 -#define PREP_ISA_IO_BASE 0x80000000 -#define PREP_ISA_MEM_BASE 0xc0000000 -#define PREP_PCI_DRAM_OFFSET 0x80000000 - -#if defined(CONFIG_4xx) -#include <asm/ibm4xx.h> -#elif defined(CONFIG_8xx) -#include <asm/mpc8xx.h> -#elif defined(CONFIG_8260) -#include <asm/mpc8260.h> -#elif !defined(CONFIG_PCI) -#define _IO_BASE 0 -#define _ISA_MEM_BASE 0 -#define PCI_DRAM_OFFSET 0 -#else /* Everyone else */ -#define _IO_BASE isa_io_base -#define _ISA_MEM_BASE isa_mem_base -#define PCI_DRAM_OFFSET pci_dram_offset -#endif /* Platform-dependent I/O */ - -#define ___IO_BASE ((void __iomem *)_IO_BASE) -extern unsigned long isa_io_base; -extern unsigned long isa_mem_base; -extern unsigned long pci_dram_offset; - -/* - * 8, 16 and 32 bit, big and little endian I/O operations, with barrier. - * - * Read operations have additional twi & isync to make sure the read - * is actually performed (i.e. the data has come back) before we start - * executing any following instructions. - */ -extern inline int in_8(const volatile unsigned char __iomem *addr) -{ - int ret; - - __asm__ __volatile__( - "sync; lbz%U1%X1 %0,%1;\n" - "twi 0,%0,0;\n" - "isync" : "=r" (ret) : "m" (*addr)); - return ret; -} - -extern inline void out_8(volatile unsigned char __iomem *addr, int val) -{ - __asm__ __volatile__("stb%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val)); -} - -extern inline int in_le16(const volatile unsigned short __iomem *addr) -{ - int ret; - - __asm__ __volatile__("sync; lhbrx %0,0,%1;\n" - "twi 0,%0,0;\n" - "isync" : "=r" (ret) : - "r" (addr), "m" (*addr)); - return ret; -} - -extern inline int in_be16(const volatile unsigned short __iomem *addr) -{ - int ret; - - __asm__ __volatile__("sync; lhz%U1%X1 %0,%1;\n" - "twi 0,%0,0;\n" - "isync" : "=r" (ret) : "m" (*addr)); - return ret; -} - -extern inline void out_le16(volatile unsigned short __iomem *addr, int val) -{ - __asm__ __volatile__("sync; sthbrx %1,0,%2" : "=m" (*addr) : - "r" (val), "r" (addr)); -} - -extern inline void out_be16(volatile unsigned short __iomem *addr, int val) -{ - __asm__ __volatile__("sync; sth%U0%X0 %1,%0" : "=m" (*addr) : "r" (val)); -} - -extern inline unsigned in_le32(const volatile unsigned __iomem *addr) -{ - unsigned ret; - - __asm__ __volatile__("sync; lwbrx %0,0,%1;\n" - "twi 0,%0,0;\n" - "isync" : "=r" (ret) : - "r" (addr), "m" (*addr)); - return ret; -} - -extern inline unsigned in_be32(const volatile unsigned __iomem *addr) -{ - unsigned ret; - - __asm__ __volatile__("sync; lwz%U1%X1 %0,%1;\n" - "twi 0,%0,0;\n" - "isync" : "=r" (ret) : "m" (*addr)); - return ret; -} - -extern inline void out_le32(volatile unsigned __iomem *addr, int val) -{ - __asm__ __volatile__("sync; stwbrx %1,0,%2" : "=m" (*addr) : - "r" (val), "r" (addr)); -} - -extern inline void out_be32(volatile unsigned __iomem *addr, int val) -{ - __asm__ __volatile__("sync; stw%U0%X0 %1,%0" : "=m" (*addr) : "r" (val)); -} -#if defined (CONFIG_8260_PCI9) -#define readb(addr) in_8((volatile u8 *)(addr)) -#define writeb(b,addr) out_8((volatile u8 *)(addr), (b)) -#else -static inline __u8 readb(const volatile void __iomem *addr) -{ - return in_8(addr); -} -static inline void writeb(__u8 b, volatile void __iomem *addr) -{ - out_8(addr, b); -} -#endif - -#if defined (CONFIG_8260_PCI9) -/* Use macros if PCI9 workaround enabled */ -#define readw(addr) in_le16((volatile u16 *)(addr)) -#define readl(addr) in_le32((volatile u32 *)(addr)) -#define writew(b,addr) out_le16((volatile u16 *)(addr),(b)) -#define writel(b,addr) out_le32((volatile u32 *)(addr),(b)) -#else -static inline __u16 readw(const volatile void __iomem *addr) -{ - return in_le16(addr); -} -static inline __u32 readl(const volatile void __iomem *addr) -{ - return in_le32(addr); -} -static inline void writew(__u16 b, volatile void __iomem *addr) -{ - out_le16(addr, b); -} -static inline void writel(__u32 b, volatile void __iomem *addr) -{ - out_le32(addr, b); -} -#endif /* CONFIG_8260_PCI9 */ - -#define readb_relaxed(addr) readb(addr) -#define readw_relaxed(addr) readw(addr) -#define readl_relaxed(addr) readl(addr) - -static inline __u8 __raw_readb(const volatile void __iomem *addr) -{ - return *(__force volatile __u8 *)(addr); -} -static inline __u16 __raw_readw(const volatile void __iomem *addr) -{ - return *(__force volatile __u16 *)(addr); -} -static inline __u32 __raw_readl(const volatile void __iomem *addr) -{ - return *(__force volatile __u32 *)(addr); -} -static inline void __raw_writeb(__u8 b, volatile void __iomem *addr) -{ - *(__force volatile __u8 *)(addr) = b; -} -static inline void __raw_writew(__u16 b, volatile void __iomem *addr) -{ - *(__force volatile __u16 *)(addr) = b; -} -static inline void __raw_writel(__u32 b, volatile void __iomem *addr) -{ - *(__force volatile __u32 *)(addr) = b; -} - -#define mmiowb() - -/* - * The insw/outsw/insl/outsl macros don't do byte-swapping. - * They are only used in practice for transferring buffers which - * are arrays of bytes, and byte-swapping is not appropriate in - * that case. - paulus - */ -#define insb(port, buf, ns) _insb((port)+___IO_BASE, (buf), (ns)) -#define outsb(port, buf, ns) _outsb((port)+___IO_BASE, (buf), (ns)) -#define insw(port, buf, ns) _insw_ns((port)+___IO_BASE, (buf), (ns)) -#define outsw(port, buf, ns) _outsw_ns((port)+___IO_BASE, (buf), (ns)) -#define insl(port, buf, nl) _insl_ns((port)+___IO_BASE, (buf), (nl)) -#define outsl(port, buf, nl) _outsl_ns((port)+___IO_BASE, (buf), (nl)) - -#define readsb(a, b, n) _insb((a), (b), (n)) -#define readsw(a, b, n) _insw_ns((a), (b), (n)) -#define readsl(a, b, n) _insl_ns((a), (b), (n)) -#define writesb(a, b, n) _outsb((a),(b),(n)) -#define writesw(a, b, n) _outsw_ns((a),(b),(n)) -#define writesl(a, b, n) _outsl_ns((a),(b),(n)) - - -/* - * On powermacs and 8xx we will get a machine check exception - * if we try to read data from a non-existent I/O port. Because - * the machine check is an asynchronous exception, it isn't - * well-defined which instruction SRR0 will point to when the - * exception occurs. - * With the sequence below (twi; isync; nop), we have found that - * the machine check occurs on one of the three instructions on - * all PPC implementations tested so far. The twi and isync are - * needed on the 601 (in fact twi; sync works too), the isync and - * nop are needed on 604[e|r], and any of twi, sync or isync will - * work on 603[e], 750, 74xx. - * The twi creates an explicit data dependency on the returned - * value which seems to be needed to make the 601 wait for the - * load to finish. - */ - -#define __do_in_asm(name, op) \ -extern __inline__ unsigned int name(unsigned int port) \ -{ \ - unsigned int x; \ - __asm__ __volatile__( \ - "sync\n" \ - "0:" op " %0,0,%1\n" \ - "1: twi 0,%0,0\n" \ - "2: isync\n" \ - "3: nop\n" \ - "4:\n" \ - ".section .fixup,\"ax\"\n" \ - "5: li %0,-1\n" \ - " b 4b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 2\n" \ - " .long 0b,5b\n" \ - " .long 1b,5b\n" \ - " .long 2b,5b\n" \ - " .long 3b,5b\n" \ - ".previous" \ - : "=&r" (x) \ - : "r" (port + ___IO_BASE)); \ - return x; \ -} - -#define __do_out_asm(name, op) \ -extern __inline__ void name(unsigned int val, unsigned int port) \ -{ \ - __asm__ __volatile__( \ - "sync\n" \ - "0:" op " %0,0,%1\n" \ - "1: sync\n" \ - "2:\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 2\n" \ - " .long 0b,2b\n" \ - " .long 1b,2b\n" \ - ".previous" \ - : : "r" (val), "r" (port + ___IO_BASE)); \ -} - -__do_out_asm(outb, "stbx") -#if defined (CONFIG_8260_PCI9) -/* in asm cannot be defined if PCI9 workaround is used */ -#define inb(port) in_8((port)+___IO_BASE) -#define inw(port) in_le16((port)+___IO_BASE) -#define inl(port) in_le32((port)+___IO_BASE) -__do_out_asm(outw, "sthbrx") -__do_out_asm(outl, "stwbrx") -#else -__do_in_asm(inb, "lbzx") -__do_in_asm(inw, "lhbrx") -__do_in_asm(inl, "lwbrx") -__do_out_asm(outw, "sthbrx") -__do_out_asm(outl, "stwbrx") - -#endif - -#define inb_p(port) inb((port)) -#define outb_p(val, port) outb((val), (port)) -#define inw_p(port) inw((port)) -#define outw_p(val, port) outw((val), (port)) -#define inl_p(port) inl((port)) -#define outl_p(val, port) outl((val), (port)) - -extern void _insb(const volatile u8 __iomem *addr, void *buf, long count); -extern void _outsb(volatile u8 __iomem *addr,const void *buf,long count); -extern void _insw_ns(const volatile u16 __iomem *addr, void *buf, long count); -extern void _outsw_ns(volatile u16 __iomem *addr, const void *buf, long count); -extern void _insl_ns(const volatile u32 __iomem *addr, void *buf, long count); -extern void _outsl_ns(volatile u32 __iomem *addr, const void *buf, long count); - - -#define IO_SPACE_LIMIT ~0 - -#if defined (CONFIG_8260_PCI9) -#define memset_io(a,b,c) memset((void *)(a),(b),(c)) -#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) -#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) -#else -static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count) -{ - memset((void __force *)addr, val, count); -} -static inline void memcpy_fromio(void *dst,const volatile void __iomem *src, int count) -{ - memcpy(dst, (void __force *) src, count); -} -static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count) -{ - memcpy((void __force *) dst, src, count); -} -#endif - -/* - * Map in an area of physical address space, for accessing - * I/O devices etc. - */ -extern void __iomem *__ioremap(phys_addr_t address, unsigned long size, - unsigned long flags); -extern void __iomem *ioremap(phys_addr_t address, unsigned long size); -#ifdef CONFIG_44x -extern void __iomem *ioremap64(unsigned long long address, unsigned long size); -#endif -#define ioremap_nocache(addr, size) ioremap((addr), (size)) -extern void iounmap(volatile void __iomem *addr); -extern unsigned long iopa(unsigned long addr); -extern void io_block_mapping(unsigned long virt, phys_addr_t phys, - unsigned int size, int flags); - -/* - * The PCI bus is inherently Little-Endian. The PowerPC is being - * run Big-Endian. Thus all values which cross the [PCI] barrier - * must be endian-adjusted. Also, the local DRAM has a different - * address from the PCI point of view, thus buffer addresses also - * have to be modified [mapped] appropriately. - */ -extern inline unsigned long virt_to_bus(volatile void * address) -{ - if (address == (void *)0) - return 0; - return (unsigned long)address - KERNELBASE + PCI_DRAM_OFFSET; -} - -extern inline void * bus_to_virt(unsigned long address) -{ - if (address == 0) - return NULL; - return (void *)(address - PCI_DRAM_OFFSET + KERNELBASE); -} - -/* - * Change virtual addresses to physical addresses and vv, for - * addresses in the area where the kernel has the RAM mapped. - */ -extern inline unsigned long virt_to_phys(volatile void * address) -{ - return (unsigned long) address - KERNELBASE; -} - -extern inline void * phys_to_virt(unsigned long address) -{ - return (void *) (address + KERNELBASE); -} - -/* - * Change "struct page" to physical address. - */ -#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) -#define page_to_bus(page) (page_to_phys(page) + PCI_DRAM_OFFSET) - -/* Enforce in-order execution of data I/O. - * No distinction between read/write on PPC; use eieio for all three. - */ -#define iobarrier_rw() eieio() -#define iobarrier_r() eieio() -#define iobarrier_w() eieio() - -/* - * Here comes the ppc implementation of the IOMAP - * interfaces. - */ -static inline unsigned int ioread8(void __iomem *addr) -{ - return readb(addr); -} - -static inline unsigned int ioread16(void __iomem *addr) -{ - return readw(addr); -} - -static inline unsigned int ioread32(void __iomem *addr) -{ - return readl(addr); -} - -static inline void iowrite8(u8 val, void __iomem *addr) -{ - writeb(val, addr); -} - -static inline void iowrite16(u16 val, void __iomem *addr) -{ - writew(val, addr); -} - -static inline void iowrite32(u32 val, void __iomem *addr) -{ - writel(val, addr); -} - -static inline void ioread8_rep(void __iomem *addr, void *dst, unsigned long count) -{ - _insb(addr, dst, count); -} - -static inline void ioread16_rep(void __iomem *addr, void *dst, unsigned long count) -{ - _insw_ns(addr, dst, count); -} - -static inline void ioread32_rep(void __iomem *addr, void *dst, unsigned long count) -{ - _insl_ns(addr, dst, count); -} - -static inline void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count) -{ - _outsb(addr, src, count); -} - -static inline void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count) -{ - _outsw_ns(addr, src, count); -} - -static inline void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count) -{ - _outsl_ns(addr, src, count); -} - -/* Create a virtual mapping cookie for an IO port range */ -extern void __iomem *ioport_map(unsigned long port, unsigned int nr); -extern void ioport_unmap(void __iomem *); - -/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */ -struct pci_dev; -extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); -extern void pci_iounmap(struct pci_dev *dev, void __iomem *); - -#endif /* _PPC_IO_H */ - -#ifdef CONFIG_8260_PCI9 -#include <asm/mpc8260_pci9.h> -#endif - -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -/* access ports */ -#define setbits32(_addr, _v) out_be32((_addr), in_be32(_addr) | (_v)) -#define clrbits32(_addr, _v) out_be32((_addr), in_be32(_addr) & ~(_v)) - -#define setbits16(_addr, _v) out_be16((_addr), in_be16(_addr) | (_v)) -#define clrbits16(_addr, _v) out_be16((_addr), in_be16(_addr) & ~(_v)) - -#define setbits8(_addr, _v) out_8((_addr), in_8(_addr) | (_v)) -#define clrbits8(_addr, _v) out_8((_addr), in_8(_addr) & ~(_v)) - -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/irq_regs.h b/include/asm-ppc/irq_regs.h deleted file mode 100644 index 3dd9c0b70270..000000000000 --- a/include/asm-ppc/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/irq_regs.h> diff --git a/include/asm-ppc/kdebug.h b/include/asm-ppc/kdebug.h deleted file mode 100644 index 6ece1b037665..000000000000 --- a/include/asm-ppc/kdebug.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/kdebug.h> diff --git a/include/asm-ppc/kgdb.h b/include/asm-ppc/kgdb.h deleted file mode 100644 index b617dac82969..000000000000 --- a/include/asm-ppc/kgdb.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * kgdb.h: Defines and declarations for serial line source level - * remote debugging of the Linux kernel using gdb. - * - * PPC Mods (C) 1998 Michael Tesch (tesch@cs.wisc.edu) - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ -#ifdef __KERNEL__ -#ifndef _PPC_KGDB_H -#define _PPC_KGDB_H - -#ifndef __ASSEMBLY__ - -/* Things specific to the gen550 backend. */ -struct uart_port; - -extern void gen550_progress(char *, unsigned short); -extern void gen550_kgdb_map_scc(void); -extern void gen550_init(int, struct uart_port *); - -/* Things specific to the pmac backend. */ -extern void zs_kgdb_hook(int tty_num); - -/* To init the kgdb engine. (called by serial hook)*/ -extern void set_debug_traps(void); - -/* To enter the debugger explicitly. */ -extern void breakpoint(void); - -/* For taking exceptions - * these are defined in traps.c - */ -extern int (*debugger)(struct pt_regs *regs); -extern int (*debugger_bpt)(struct pt_regs *regs); -extern int (*debugger_sstep)(struct pt_regs *regs); -extern int (*debugger_iabr_match)(struct pt_regs *regs); -extern int (*debugger_dabr_match)(struct pt_regs *regs); -extern void (*debugger_fault_handler)(struct pt_regs *regs); - -/* What we bring to the party */ -int kgdb_bpt(struct pt_regs *regs); -int kgdb_sstep(struct pt_regs *regs); -void kgdb(struct pt_regs *regs); -int kgdb_iabr_match(struct pt_regs *regs); -int kgdb_dabr_match(struct pt_regs *regs); - -/* - * external low-level support routines (ie macserial.c) - */ -extern void kgdb_interruptible(int); /* control interrupts from serial */ -extern void putDebugChar(char); /* write a single character */ -extern char getDebugChar(void); /* read and return a single char */ - -#endif /* !(__ASSEMBLY__) */ -#endif /* !(_PPC_KGDB_H) */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/m8260_pci.h b/include/asm-ppc/m8260_pci.h deleted file mode 100644 index bf9e05dd54b5..000000000000 --- a/include/asm-ppc/m8260_pci.h +++ /dev/null @@ -1,187 +0,0 @@ -/* - * include/asm-ppc/m8260_pci.h - * - * Definitions for the MPC8250/MPC8265/MPC8266 integrated PCI host bridge. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifdef __KERNEL__ -#ifndef __M8260_PCI_H -#define __M8260_PCI_H - -#include <linux/pci_ids.h> - -/* - * Define the vendor/device ID for the MPC8265. - */ -#define PCI_DEVICE_ID_MPC8265 ((0x18C0 << 16) | PCI_VENDOR_ID_MOTOROLA) -#define PCI_DEVICE_ID_MPC8272 ((0x18C1 << 16) | PCI_VENDOR_ID_MOTOROLA) - -#define M8265_PCIBR0 0x101ac -#define M8265_PCIBR1 0x101b0 -#define M8265_PCIMSK0 0x101c4 -#define M8265_PCIMSK1 0x101c8 - -/* Bit definitions for PCIBR registers */ - -#define PCIBR_ENABLE 0x00000001 - -/* Bit definitions for PCIMSK registers */ - -#define PCIMSK_32KiB 0xFFFF8000 /* Size of window, smallest */ -#define PCIMSK_64KiB 0xFFFF0000 -#define PCIMSK_128KiB 0xFFFE0000 -#define PCIMSK_256KiB 0xFFFC0000 -#define PCIMSK_512KiB 0xFFF80000 -#define PCIMSK_1MiB 0xFFF00000 -#define PCIMSK_2MiB 0xFFE00000 -#define PCIMSK_4MiB 0xFFC00000 -#define PCIMSK_8MiB 0xFF800000 -#define PCIMSK_16MiB 0xFF000000 -#define PCIMSK_32MiB 0xFE000000 -#define PCIMSK_64MiB 0xFC000000 -#define PCIMSK_128MiB 0xF8000000 -#define PCIMSK_256MiB 0xF0000000 -#define PCIMSK_512MiB 0xE0000000 -#define PCIMSK_1GiB 0xC0000000 /* Size of window, largest */ - - -#define M826X_SCCR_PCI_MODE_EN 0x100 - - -/* - * Outbound ATU registers (3 sets). These registers control how 60x bus (local) - * addresses are translated to PCI addresses when the MPC826x is a PCI bus - * master (initiator). - */ - -#define POTAR_REG0 0x10800 /* PCI Outbound Translation Addr registers */ -#define POTAR_REG1 0x10818 -#define POTAR_REG2 0x10830 - -#define POBAR_REG0 0x10808 /* PCI Outbound Base Addr registers */ -#define POBAR_REG1 0x10820 -#define POBAR_REG2 0x10838 - -#define POCMR_REG0 0x10810 /* PCI Outbound Comparison Mask registers */ -#define POCMR_REG1 0x10828 -#define POCMR_REG2 0x10840 - -/* Bit definitions for POMCR registers */ - -#define POCMR_MASK_4KiB 0x000FFFFF -#define POCMR_MASK_8KiB 0x000FFFFE -#define POCMR_MASK_16KiB 0x000FFFFC -#define POCMR_MASK_32KiB 0x000FFFF8 -#define POCMR_MASK_64KiB 0x000FFFF0 -#define POCMR_MASK_128KiB 0x000FFFE0 -#define POCMR_MASK_256KiB 0x000FFFC0 -#define POCMR_MASK_512KiB 0x000FFF80 -#define POCMR_MASK_1MiB 0x000FFF00 -#define POCMR_MASK_2MiB 0x000FFE00 -#define POCMR_MASK_4MiB 0x000FFC00 -#define POCMR_MASK_8MiB 0x000FF800 -#define POCMR_MASK_16MiB 0x000FF000 -#define POCMR_MASK_32MiB 0x000FE000 -#define POCMR_MASK_64MiB 0x000FC000 -#define POCMR_MASK_128MiB 0x000F8000 -#define POCMR_MASK_256MiB 0x000F0000 -#define POCMR_MASK_512MiB 0x000E0000 -#define POCMR_MASK_1GiB 0x000C0000 - -#define POCMR_ENABLE 0x80000000 -#define POCMR_PCI_IO 0x40000000 -#define POCMR_PREFETCH_EN 0x20000000 - -/* Soft PCI reset */ - -#define PCI_GCR_REG 0x10880 - -/* Bit definitions for PCI_GCR registers */ - -#define PCIGCR_PCI_BUS_EN 0x1 - -#define PCI_EMR_REG 0x10888 -/* - * Inbound ATU registers (2 sets). These registers control how PCI addresses - * are translated to 60x bus (local) addresses when the MPC826x is a PCI bus target. - */ - -#define PITAR_REG1 0x108D0 -#define PIBAR_REG1 0x108D8 -#define PICMR_REG1 0x108E0 -#define PITAR_REG0 0x108E8 -#define PIBAR_REG0 0x108F0 -#define PICMR_REG0 0x108F8 - -/* Bit definitions for PCI Inbound Comparison Mask registers */ - -#define PICMR_MASK_4KiB 0x000FFFFF -#define PICMR_MASK_8KiB 0x000FFFFE -#define PICMR_MASK_16KiB 0x000FFFFC -#define PICMR_MASK_32KiB 0x000FFFF8 -#define PICMR_MASK_64KiB 0x000FFFF0 -#define PICMR_MASK_128KiB 0x000FFFE0 -#define PICMR_MASK_256KiB 0x000FFFC0 -#define PICMR_MASK_512KiB 0x000FFF80 -#define PICMR_MASK_1MiB 0x000FFF00 -#define PICMR_MASK_2MiB 0x000FFE00 -#define PICMR_MASK_4MiB 0x000FFC00 -#define PICMR_MASK_8MiB 0x000FF800 -#define PICMR_MASK_16MiB 0x000FF000 -#define PICMR_MASK_32MiB 0x000FE000 -#define PICMR_MASK_64MiB 0x000FC000 -#define PICMR_MASK_128MiB 0x000F8000 -#define PICMR_MASK_256MiB 0x000F0000 -#define PICMR_MASK_512MiB 0x000E0000 -#define PICMR_MASK_1GiB 0x000C0000 - -#define PICMR_ENABLE 0x80000000 -#define PICMR_NO_SNOOP_EN 0x40000000 -#define PICMR_PREFETCH_EN 0x20000000 - -/* PCI error Registers */ - -#define PCI_ERROR_STATUS_REG 0x10884 -#define PCI_ERROR_MASK_REG 0x10888 -#define PCI_ERROR_CONTROL_REG 0x1088C -#define PCI_ERROR_ADRS_CAPTURE_REG 0x10890 -#define PCI_ERROR_DATA_CAPTURE_REG 0x10898 -#define PCI_ERROR_CTRL_CAPTURE_REG 0x108A0 - -/* PCI error Register bit defines */ - -#define PCI_ERROR_PCI_ADDR_PAR 0x00000001 -#define PCI_ERROR_PCI_DATA_PAR_WR 0x00000002 -#define PCI_ERROR_PCI_DATA_PAR_RD 0x00000004 -#define PCI_ERROR_PCI_NO_RSP 0x00000008 -#define PCI_ERROR_PCI_TAR_ABT 0x00000010 -#define PCI_ERROR_PCI_SERR 0x00000020 -#define PCI_ERROR_PCI_PERR_RD 0x00000040 -#define PCI_ERROR_PCI_PERR_WR 0x00000080 -#define PCI_ERROR_I2O_OFQO 0x00000100 -#define PCI_ERROR_I2O_IPQO 0x00000200 -#define PCI_ERROR_IRA 0x00000400 -#define PCI_ERROR_NMI 0x00000800 -#define PCI_ERROR_I2O_DBMC 0x00001000 - -/* - * Register pair used to generate configuration cycles on the PCI bus - * and access the MPC826x's own PCI configuration registers. - */ - -#define PCI_CFG_ADDR_REG 0x10900 -#define PCI_CFG_DATA_REG 0x10904 - -/* Bus parking decides where the bus control sits when idle */ -/* If modifying memory controllers for PCI park on the core */ - -#define PPC_ACR_BUS_PARK_CORE 0x6 -#define PPC_ACR_BUS_PARK_PCI 0x3 - -#endif /* __M8260_PCI_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/machdep.h b/include/asm-ppc/machdep.h deleted file mode 100644 index a20b499b0186..000000000000 --- a/include/asm-ppc/machdep.h +++ /dev/null @@ -1,178 +0,0 @@ -#ifdef __KERNEL__ -#ifndef _PPC_MACHDEP_H -#define _PPC_MACHDEP_H - -#include <linux/init.h> -#include <linux/kexec.h> - -#include <asm/setup.h> -#include <asm/page.h> - -struct pt_regs; -struct pci_bus; -struct pci_dev; -struct seq_file; -struct file; - -/* - * This is for compatibility with ARCH=powerpc. - */ -#define machine_is(x) __MACHINE_IS_##x -#define __MACHINE_IS_powermac 0 -#define __MACHINE_IS_chrp 0 -#ifdef CONFIG_PPC_PREP -#define __MACHINE_IS_prep 1 -#else -#define __MACHINE_IS_prep 0 -#endif - -/* We export this macro for external modules like Alsa to know if - * ppc_md.feature_call is implemented or not - */ -#define CONFIG_PPC_HAS_FEATURE_CALLS - -struct machdep_calls { - void (*setup_arch)(void); - /* Optional, may be NULL. */ - int (*show_cpuinfo)(struct seq_file *m); - int (*show_percpuinfo)(struct seq_file *m, int i); - /* Optional, may be NULL. */ - unsigned int (*irq_canonicalize)(unsigned int irq); - void (*init_IRQ)(void); - int (*get_irq)(void); - - /* A general init function, called by ppc_init in init/main.c. - May be NULL. DEPRECATED ! */ - void (*init)(void); - /* For compatibility with merged platforms */ - void (*init_early)(void); - - void (*restart)(char *cmd); - void (*power_off)(void); - void (*halt)(void); - - void (*idle_loop)(void); - void (*power_save)(void); - - long (*time_init)(void); /* Optional, may be NULL */ - int (*set_rtc_time)(unsigned long nowtime); - unsigned long (*get_rtc_time)(void); - unsigned char (*rtc_read_val)(int addr); - void (*rtc_write_val)(int addr, unsigned char val); - void (*calibrate_decr)(void); - - void (*heartbeat)(void); - unsigned long heartbeat_reset; - unsigned long heartbeat_count; - - unsigned long (*find_end_of_memory)(void); - void (*setup_io_mappings)(void); - - void (*early_serial_map)(void); - void (*progress)(char *, unsigned short); - void (*kgdb_map_scc)(void); - - unsigned char (*nvram_read_val)(int addr); - void (*nvram_write_val)(int addr, unsigned char val); - void (*nvram_sync)(void); - - /* - * optional PCI "hooks" - */ - - /* Called after scanning the bus, before allocating resources */ - void (*pcibios_fixup)(void); - - /* Called after PPC generic resource fixup to perform - machine specific fixups */ - void (*pcibios_fixup_resources)(struct pci_dev *); - - /* Called for each PCI bus in the system when it's probed */ - void (*pcibios_fixup_bus)(struct pci_bus *); - - /* Called when pci_enable_device() is called (initial=0) or - * when a device with no assigned resource is found (initial=1). - * Returns 0 to allow assignment/enabling of the device. */ - int (*pcibios_enable_device_hook)(struct pci_dev *, int initial); - - /* For interrupt routing */ - unsigned char (*pci_swizzle)(struct pci_dev *, unsigned char *); - int (*pci_map_irq)(struct pci_dev *, unsigned char, unsigned char); - - /* Called in indirect_* to avoid touching devices */ - int (*pci_exclude_device)(unsigned char, unsigned char); - - /* Called at then very end of pcibios_init() */ - void (*pcibios_after_init)(void); - - /* Get access protection for /dev/mem */ - pgprot_t (*phys_mem_access_prot)(struct file *file, - unsigned long pfn, - unsigned long size, - pgprot_t vma_prot); - - /* Motherboard/chipset features. This is a kind of general purpose - * hook used to control some machine specific features (like reset - * lines, chip power control, etc...). - */ - long (*feature_call)(unsigned int feature, ...); - -#ifdef CONFIG_SMP - /* functions for dealing with other cpus */ - struct smp_ops_t *smp_ops; -#endif /* CONFIG_SMP */ - -#ifdef CONFIG_KEXEC - /* Called to shutdown machine specific hardware not already controlled - * by other drivers. - * XXX Should we move this one out of kexec scope? - */ - void (*machine_shutdown)(void); - - /* Called to do the minimal shutdown needed to run a kexec'd kernel - * to run successfully. - * XXX Should we move this one out of kexec scope? - */ - void (*machine_crash_shutdown)(void); - - /* Called to do what every setup is needed on image and the - * reboot code buffer. Returns 0 on success. - * Provide your own (maybe dummy) implementation if your platform - * claims to support kexec. - */ - int (*machine_kexec_prepare)(struct kimage *image); - - /* Called to handle any machine specific cleanup on image */ - void (*machine_kexec_cleanup)(struct kimage *image); - - /* Called to perform the _real_ kexec. - * Do NOT allocate memory or fail here. We are past the point of - * no return. - */ - void (*machine_kexec)(struct kimage *image); -#endif /* CONFIG_KEXEC */ -}; - -extern struct machdep_calls ppc_md; -extern char cmd_line[COMMAND_LINE_SIZE]; - -extern void setup_pci_ptrs(void); - -#ifdef CONFIG_SMP -struct smp_ops_t { - void (*message_pass)(int target, int msg); - int (*probe)(void); - void (*kick_cpu)(int nr); - void (*setup_cpu)(int nr); - void (*space_timers)(int nr); - void (*take_timebase)(void); - void (*give_timebase)(void); -}; - -/* Poor default implementations */ -extern void __devinit smp_generic_give_timebase(void); -extern void __devinit smp_generic_take_timebase(void); -#endif /* CONFIG_SMP */ - -#endif /* _PPC_MACHDEP_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/md.h b/include/asm-ppc/md.h deleted file mode 100644 index 9a9b6b42b4b4..000000000000 --- a/include/asm-ppc/md.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * md.h: High speed xor_block operation for RAID4/5 - * - */ - -#ifdef __KERNEL__ -#ifndef __ASM_MD_H -#define __ASM_MD_H - -/* #define HAVE_ARCH_XORBLOCK */ - -#define MD_XORBLOCK_ALIGNMENT sizeof(long) - -#endif /* __ASM_MD_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/mk48t59.h b/include/asm-ppc/mk48t59.h deleted file mode 100644 index 6a0ed6fc2d56..000000000000 --- a/include/asm-ppc/mk48t59.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Registers for the mk48t59 real-time-clock - */ - -#ifndef _PPC_MK48T59_H -#define _PPC_MK48T59_H - -/* RTC Offsets */ - -#define MK48T59_RTC_SECONDS 0x1FF9 -#define MK48T59_RTC_MINUTES 0x1FFA -#define MK48T59_RTC_HOURS 0x1FFB -#define MK48T59_RTC_DAY_OF_WEEK 0x1FFC -#define MK48T59_RTC_DAY_OF_MONTH 0x1FFD -#define MK48T59_RTC_MONTH 0x1FFE -#define MK48T59_RTC_YEAR 0x1FFF - -#define MK48T59_RTC_CONTROLA 0x1FF8 -#define MK48T59_RTC_CA_WRITE 0x80 -#define MK48T59_RTC_CA_READ 0x40 -#define MK48T59_RTC_CA_CALIB_SIGN 0x20 -#define MK48T59_RTC_CA_CALIB_MASK 0x1f - -#define MK48T59_RTC_CONTROLB 0x1FF9 -#define MK48T59_RTC_CB_STOP 0x80 - -#endif /* _PPC_MK48T59_H */ diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h deleted file mode 100644 index d76ef098ed37..000000000000 --- a/include/asm-ppc/mmu.h +++ /dev/null @@ -1,444 +0,0 @@ -/* - * PowerPC memory management structures - */ - -#ifdef __KERNEL__ -#ifndef _PPC_MMU_H_ -#define _PPC_MMU_H_ - - -#ifndef __ASSEMBLY__ - -/* - * Define physical address type. Machines using split size - * virtual/physical addressing like 32-bit virtual / 36-bit - * physical need a larger than native word size type. -Matt - */ -#ifndef CONFIG_PHYS_64BIT -#define PHYS_FMT "%.8lx" -#else -extern phys_addr_t fixup_bigphys_addr(phys_addr_t, phys_addr_t); -#define PHYS_FMT "%16Lx" -#endif - -typedef struct { - unsigned long id; - unsigned long vdso_base; -} mm_context_t; - -/* Hardware Page Table Entry */ -typedef struct _PTE { - unsigned long v:1; /* Entry is valid */ - unsigned long vsid:24; /* Virtual segment identifier */ - unsigned long h:1; /* Hash algorithm indicator */ - unsigned long api:6; /* Abbreviated page index */ - unsigned long rpn:20; /* Real (physical) page number */ - unsigned long :3; /* Unused */ - unsigned long r:1; /* Referenced */ - unsigned long c:1; /* Changed */ - unsigned long w:1; /* Write-thru cache mode */ - unsigned long i:1; /* Cache inhibited */ - unsigned long m:1; /* Memory coherence */ - unsigned long g:1; /* Guarded */ - unsigned long :1; /* Unused */ - unsigned long pp:2; /* Page protection */ -} PTE; - -/* Values for PP (assumes Ks=0, Kp=1) */ -#define PP_RWXX 0 /* Supervisor read/write, User none */ -#define PP_RWRX 1 /* Supervisor read/write, User read */ -#define PP_RWRW 2 /* Supervisor read/write, User read/write */ -#define PP_RXRX 3 /* Supervisor read, User read */ - -/* Segment Register */ -typedef struct _SEGREG { - unsigned long t:1; /* Normal or I/O type */ - unsigned long ks:1; /* Supervisor 'key' (normally 0) */ - unsigned long kp:1; /* User 'key' (normally 1) */ - unsigned long n:1; /* No-execute */ - unsigned long :4; /* Unused */ - unsigned long vsid:24; /* Virtual Segment Identifier */ -} SEGREG; - -/* Block Address Translation (BAT) Registers */ -typedef struct _P601_BATU { /* Upper part of BAT for 601 processor */ - unsigned long bepi:15; /* Effective page index (virtual address) */ - unsigned long :8; /* unused */ - unsigned long w:1; - unsigned long i:1; /* Cache inhibit */ - unsigned long m:1; /* Memory coherence */ - unsigned long ks:1; /* Supervisor key (normally 0) */ - unsigned long kp:1; /* User key (normally 1) */ - unsigned long pp:2; /* Page access protections */ -} P601_BATU; - -typedef struct _BATU { /* Upper part of BAT (all except 601) */ - unsigned long bepi:15; /* Effective page index (virtual address) */ - unsigned long :4; /* Unused */ - unsigned long bl:11; /* Block size mask */ - unsigned long vs:1; /* Supervisor valid */ - unsigned long vp:1; /* User valid */ -} BATU; - -typedef struct _P601_BATL { /* Lower part of BAT for 601 processor */ - unsigned long brpn:15; /* Real page index (physical address) */ - unsigned long :10; /* Unused */ - unsigned long v:1; /* Valid bit */ - unsigned long bl:6; /* Block size mask */ -} P601_BATL; - -typedef struct _BATL { /* Lower part of BAT (all except 601) */ - unsigned long brpn:15; /* Real page index (physical address) */ - unsigned long :10; /* Unused */ - unsigned long w:1; /* Write-thru cache */ - unsigned long i:1; /* Cache inhibit */ - unsigned long m:1; /* Memory coherence */ - unsigned long g:1; /* Guarded (MBZ in IBAT) */ - unsigned long :1; /* Unused */ - unsigned long pp:2; /* Page access protections */ -} BATL; - -typedef struct _BAT { - BATU batu; /* Upper register */ - BATL batl; /* Lower register */ -} BAT; - -typedef struct _P601_BAT { - P601_BATU batu; /* Upper register */ - P601_BATL batl; /* Lower register */ -} P601_BAT; - -#endif /* __ASSEMBLY__ */ - -/* Block size masks */ -#define BL_128K 0x000 -#define BL_256K 0x001 -#define BL_512K 0x003 -#define BL_1M 0x007 -#define BL_2M 0x00F -#define BL_4M 0x01F -#define BL_8M 0x03F -#define BL_16M 0x07F -#define BL_32M 0x0FF -#define BL_64M 0x1FF -#define BL_128M 0x3FF -#define BL_256M 0x7FF - -/* BAT Access Protection */ -#define BPP_XX 0x00 /* No access */ -#define BPP_RX 0x01 /* Read only */ -#define BPP_RW 0x02 /* Read/write */ - -/* Control/status registers for the MPC8xx. - * A write operation to these registers causes serialized access. - * During software tablewalk, the registers used perform mask/shift-add - * operations when written/read. A TLB entry is created when the Mx_RPN - * is written, and the contents of several registers are used to - * create the entry. - */ -#define SPRN_MI_CTR 784 /* Instruction TLB control register */ -#define MI_GPM 0x80000000 /* Set domain manager mode */ -#define MI_PPM 0x40000000 /* Set subpage protection */ -#define MI_CIDEF 0x20000000 /* Set cache inhibit when MMU dis */ -#define MI_RSV4I 0x08000000 /* Reserve 4 TLB entries */ -#define MI_PPCS 0x02000000 /* Use MI_RPN prob/priv state */ -#define MI_IDXMASK 0x00001f00 /* TLB index to be loaded */ -#define MI_RESETVAL 0x00000000 /* Value of register at reset */ - -/* These are the Ks and Kp from the PowerPC books. For proper operation, - * Ks = 0, Kp = 1. - */ -#define SPRN_MI_AP 786 -#define MI_Ks 0x80000000 /* Should not be set */ -#define MI_Kp 0x40000000 /* Should always be set */ - -/* The effective page number register. When read, contains the information - * about the last instruction TLB miss. When MI_RPN is written, bits in - * this register are used to create the TLB entry. - */ -#define SPRN_MI_EPN 787 -#define MI_EPNMASK 0xfffff000 /* Effective page number for entry */ -#define MI_EVALID 0x00000200 /* Entry is valid */ -#define MI_ASIDMASK 0x0000000f /* ASID match value */ - /* Reset value is undefined */ - -/* A "level 1" or "segment" or whatever you want to call it register. - * For the instruction TLB, it contains bits that get loaded into the - * TLB entry when the MI_RPN is written. - */ -#define SPRN_MI_TWC 789 -#define MI_APG 0x000001e0 /* Access protection group (0) */ -#define MI_GUARDED 0x00000010 /* Guarded storage */ -#define MI_PSMASK 0x0000000c /* Mask of page size bits */ -#define MI_PS8MEG 0x0000000c /* 8M page size */ -#define MI_PS512K 0x00000004 /* 512K page size */ -#define MI_PS4K_16K 0x00000000 /* 4K or 16K page size */ -#define MI_SVALID 0x00000001 /* Segment entry is valid */ - /* Reset value is undefined */ - -/* Real page number. Defined by the pte. Writing this register - * causes a TLB entry to be created for the instruction TLB, using - * additional information from the MI_EPN, and MI_TWC registers. - */ -#define SPRN_MI_RPN 790 - -/* Define an RPN value for mapping kernel memory to large virtual - * pages for boot initialization. This has real page number of 0, - * large page size, shared page, cache enabled, and valid. - * Also mark all subpages valid and write access. - */ -#define MI_BOOTINIT 0x000001fd - -#define SPRN_MD_CTR 792 /* Data TLB control register */ -#define MD_GPM 0x80000000 /* Set domain manager mode */ -#define MD_PPM 0x40000000 /* Set subpage protection */ -#define MD_CIDEF 0x20000000 /* Set cache inhibit when MMU dis */ -#define MD_WTDEF 0x10000000 /* Set writethrough when MMU dis */ -#define MD_RSV4I 0x08000000 /* Reserve 4 TLB entries */ -#define MD_TWAM 0x04000000 /* Use 4K page hardware assist */ -#define MD_PPCS 0x02000000 /* Use MI_RPN prob/priv state */ -#define MD_IDXMASK 0x00001f00 /* TLB index to be loaded */ -#define MD_RESETVAL 0x04000000 /* Value of register at reset */ - -#define SPRN_M_CASID 793 /* Address space ID (context) to match */ -#define MC_ASIDMASK 0x0000000f /* Bits used for ASID value */ - - -/* These are the Ks and Kp from the PowerPC books. For proper operation, - * Ks = 0, Kp = 1. - */ -#define SPRN_MD_AP 794 -#define MD_Ks 0x80000000 /* Should not be set */ -#define MD_Kp 0x40000000 /* Should always be set */ - -/* The effective page number register. When read, contains the information - * about the last instruction TLB miss. When MD_RPN is written, bits in - * this register are used to create the TLB entry. - */ -#define SPRN_MD_EPN 795 -#define MD_EPNMASK 0xfffff000 /* Effective page number for entry */ -#define MD_EVALID 0x00000200 /* Entry is valid */ -#define MD_ASIDMASK 0x0000000f /* ASID match value */ - /* Reset value is undefined */ - -/* The pointer to the base address of the first level page table. - * During a software tablewalk, reading this register provides the address - * of the entry associated with MD_EPN. - */ -#define SPRN_M_TWB 796 -#define M_L1TB 0xfffff000 /* Level 1 table base address */ -#define M_L1INDX 0x00000ffc /* Level 1 index, when read */ - /* Reset value is undefined */ - -/* A "level 1" or "segment" or whatever you want to call it register. - * For the data TLB, it contains bits that get loaded into the TLB entry - * when the MD_RPN is written. It is also provides the hardware assist - * for finding the PTE address during software tablewalk. - */ -#define SPRN_MD_TWC 797 -#define MD_L2TB 0xfffff000 /* Level 2 table base address */ -#define MD_L2INDX 0xfffffe00 /* Level 2 index (*pte), when read */ -#define MD_APG 0x000001e0 /* Access protection group (0) */ -#define MD_GUARDED 0x00000010 /* Guarded storage */ -#define MD_PSMASK 0x0000000c /* Mask of page size bits */ -#define MD_PS8MEG 0x0000000c /* 8M page size */ -#define MD_PS512K 0x00000004 /* 512K page size */ -#define MD_PS4K_16K 0x00000000 /* 4K or 16K page size */ -#define MD_WT 0x00000002 /* Use writethrough page attribute */ -#define MD_SVALID 0x00000001 /* Segment entry is valid */ - /* Reset value is undefined */ - - -/* Real page number. Defined by the pte. Writing this register - * causes a TLB entry to be created for the data TLB, using - * additional information from the MD_EPN, and MD_TWC registers. - */ -#define SPRN_MD_RPN 798 - -/* This is a temporary storage register that could be used to save - * a processor working register during a tablewalk. - */ -#define SPRN_M_TW 799 - -/* - * At present, all PowerPC 400-class processors share a similar TLB - * architecture. The instruction and data sides share a unified, - * 64-entry, fully-associative TLB which is maintained totally under - * software control. In addition, the instruction side has a - * hardware-managed, 4-entry, fully- associative TLB which serves as a - * first level to the shared TLB. These two TLBs are known as the UTLB - * and ITLB, respectively. - */ - -#define PPC4XX_TLB_SIZE 64 - -/* - * TLB entries are defined by a "high" tag portion and a "low" data - * portion. On all architectures, the data portion is 32-bits. - * - * TLB entries are managed entirely under software control by reading, - * writing, and searchoing using the 4xx-specific tlbre, tlbwr, and tlbsx - * instructions. - */ - -#define TLB_LO 1 -#define TLB_HI 0 - -#define TLB_DATA TLB_LO -#define TLB_TAG TLB_HI - -/* Tag portion */ - -#define TLB_EPN_MASK 0xFFFFFC00 /* Effective Page Number */ -#define TLB_PAGESZ_MASK 0x00000380 -#define TLB_PAGESZ(x) (((x) & 0x7) << 7) -#define PAGESZ_1K 0 -#define PAGESZ_4K 1 -#define PAGESZ_16K 2 -#define PAGESZ_64K 3 -#define PAGESZ_256K 4 -#define PAGESZ_1M 5 -#define PAGESZ_4M 6 -#define PAGESZ_16M 7 -#define TLB_VALID 0x00000040 /* Entry is valid */ - -/* Data portion */ - -#define TLB_RPN_MASK 0xFFFFFC00 /* Real Page Number */ -#define TLB_PERM_MASK 0x00000300 -#define TLB_EX 0x00000200 /* Instruction execution allowed */ -#define TLB_WR 0x00000100 /* Writes permitted */ -#define TLB_ZSEL_MASK 0x000000F0 -#define TLB_ZSEL(x) (((x) & 0xF) << 4) -#define TLB_ATTR_MASK 0x0000000F -#define TLB_W 0x00000008 /* Caching is write-through */ -#define TLB_I 0x00000004 /* Caching is inhibited */ -#define TLB_M 0x00000002 /* Memory is coherent */ -#define TLB_G 0x00000001 /* Memory is guarded from prefetch */ - -/* - * PPC440 support - */ -#define PPC44x_MMUCR_TID 0x000000ff -#define PPC44x_MMUCR_STS 0x00010000 - -#define PPC44x_TLB_PAGEID 0 -#define PPC44x_TLB_XLAT 1 -#define PPC44x_TLB_ATTRIB 2 - -/* Page identification fields */ -#define PPC44x_TLB_EPN_MASK 0xfffffc00 /* Effective Page Number */ -#define PPC44x_TLB_VALID 0x00000200 /* Valid flag */ -#define PPC44x_TLB_TS 0x00000100 /* Translation address space */ -#define PPC44x_TLB_1K 0x00000000 /* Page sizes */ -#define PPC44x_TLB_4K 0x00000010 -#define PPC44x_TLB_16K 0x00000020 -#define PPC44x_TLB_64K 0x00000030 -#define PPC44x_TLB_256K 0x00000040 -#define PPC44x_TLB_1M 0x00000050 -#define PPC44x_TLB_16M 0x00000070 -#define PPC44x_TLB_256M 0x00000090 - -/* Translation fields */ -#define PPC44x_TLB_RPN_MASK 0xfffffc00 /* Real Page Number */ -#define PPC44x_TLB_ERPN_MASK 0x0000000f - -/* Storage attribute and access control fields */ -#define PPC44x_TLB_ATTR_MASK 0x0000ff80 -#define PPC44x_TLB_U0 0x00008000 /* User 0 */ -#define PPC44x_TLB_U1 0x00004000 /* User 1 */ -#define PPC44x_TLB_U2 0x00002000 /* User 2 */ -#define PPC44x_TLB_U3 0x00001000 /* User 3 */ -#define PPC44x_TLB_W 0x00000800 /* Caching is write-through */ -#define PPC44x_TLB_I 0x00000400 /* Caching is inhibited */ -#define PPC44x_TLB_M 0x00000200 /* Memory is coherent */ -#define PPC44x_TLB_G 0x00000100 /* Memory is guarded */ -#define PPC44x_TLB_E 0x00000080 /* Memory is guarded */ - -#define PPC44x_TLB_PERM_MASK 0x0000003f -#define PPC44x_TLB_UX 0x00000020 /* User execution */ -#define PPC44x_TLB_UW 0x00000010 /* User write */ -#define PPC44x_TLB_UR 0x00000008 /* User read */ -#define PPC44x_TLB_SX 0x00000004 /* Super execution */ -#define PPC44x_TLB_SW 0x00000002 /* Super write */ -#define PPC44x_TLB_SR 0x00000001 /* Super read */ - -/* Book-E defined page sizes */ -#define BOOKE_PAGESZ_1K 0 -#define BOOKE_PAGESZ_4K 1 -#define BOOKE_PAGESZ_16K 2 -#define BOOKE_PAGESZ_64K 3 -#define BOOKE_PAGESZ_256K 4 -#define BOOKE_PAGESZ_1M 5 -#define BOOKE_PAGESZ_4M 6 -#define BOOKE_PAGESZ_16M 7 -#define BOOKE_PAGESZ_64M 8 -#define BOOKE_PAGESZ_256M 9 -#define BOOKE_PAGESZ_1GB 10 -#define BOOKE_PAGESZ_4GB 11 -#define BOOKE_PAGESZ_16GB 12 -#define BOOKE_PAGESZ_64GB 13 -#define BOOKE_PAGESZ_256GB 14 -#define BOOKE_PAGESZ_1TB 15 - -#ifndef CONFIG_SERIAL_TEXT_DEBUG -#define PPC44x_EARLY_TLBS 1 -#else -#define PPC44x_EARLY_TLBS 2 -#endif - -/* - * Freescale Book-E MMU support - */ - -#define MAS0_TLBSEL(x) ((x << 28) & 0x30000000) -#define MAS0_ESEL(x) ((x << 16) & 0x0FFF0000) -#define MAS0_NV(x) ((x) & 0x00000FFF) - -#define MAS1_VALID 0x80000000 -#define MAS1_IPROT 0x40000000 -#define MAS1_TID(x) ((x << 16) & 0x3FFF0000) -#define MAS1_TS 0x00001000 -#define MAS1_TSIZE(x) ((x << 8) & 0x00000F00) - -#define MAS2_EPN 0xFFFFF000 -#define MAS2_X0 0x00000040 -#define MAS2_X1 0x00000020 -#define MAS2_W 0x00000010 -#define MAS2_I 0x00000008 -#define MAS2_M 0x00000004 -#define MAS2_G 0x00000002 -#define MAS2_E 0x00000001 - -#define MAS3_RPN 0xFFFFF000 -#define MAS3_U0 0x00000200 -#define MAS3_U1 0x00000100 -#define MAS3_U2 0x00000080 -#define MAS3_U3 0x00000040 -#define MAS3_UX 0x00000020 -#define MAS3_SX 0x00000010 -#define MAS3_UW 0x00000008 -#define MAS3_SW 0x00000004 -#define MAS3_UR 0x00000002 -#define MAS3_SR 0x00000001 - -#define MAS4_TLBSELD(x) MAS0_TLBSEL(x) -#define MAS4_TIDDSEL 0x000F0000 -#define MAS4_TSIZED(x) MAS1_TSIZE(x) -#define MAS4_X0D 0x00000040 -#define MAS4_X1D 0x00000020 -#define MAS4_WD 0x00000010 -#define MAS4_ID 0x00000008 -#define MAS4_MD 0x00000004 -#define MAS4_GD 0x00000002 -#define MAS4_ED 0x00000001 - -#define MAS6_SPID0 0x3FFF0000 -#define MAS6_SPID1 0x00007FFE -#define MAS6_SAS 0x00000001 -#define MAS6_SPID MAS6_SPID0 - -#define MAS7_RPN 0xFFFFFFFF - -#endif /* _PPC_MMU_H_ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/mmu_context.h b/include/asm-ppc/mmu_context.h deleted file mode 100644 index 9f097e25b169..000000000000 --- a/include/asm-ppc/mmu_context.h +++ /dev/null @@ -1,198 +0,0 @@ -#ifdef __KERNEL__ -#ifndef __PPC_MMU_CONTEXT_H -#define __PPC_MMU_CONTEXT_H - -#include <linux/bitops.h> - -#include <asm/atomic.h> -#include <asm/mmu.h> -#include <asm/cputable.h> -#include <asm-generic/mm_hooks.h> - -/* - * On 32-bit PowerPC 6xx/7xx/7xxx CPUs, we use a set of 16 VSIDs - * (virtual segment identifiers) for each context. Although the - * hardware supports 24-bit VSIDs, and thus >1 million contexts, - * we only use 32,768 of them. That is ample, since there can be - * at most around 30,000 tasks in the system anyway, and it means - * that we can use a bitmap to indicate which contexts are in use. - * Using a bitmap means that we entirely avoid all of the problems - * that we used to have when the context number overflowed, - * particularly on SMP systems. - * -- paulus. - */ - -/* - * This function defines the mapping from contexts to VSIDs (virtual - * segment IDs). We use a skew on both the context and the high 4 bits - * of the 32-bit virtual address (the "effective segment ID") in order - * to spread out the entries in the MMU hash table. Note, if this - * function is changed then arch/ppc/mm/hashtable.S will have to be - * changed to correspond. - */ -#define CTX_TO_VSID(ctx, va) (((ctx) * (897 * 16) + ((va) >> 28) * 0x111) \ - & 0xffffff) - -/* - The MPC8xx has only 16 contexts. We rotate through them on each - task switch. A better way would be to keep track of tasks that - own contexts, and implement an LRU usage. That way very active - tasks don't always have to pay the TLB reload overhead. The - kernel pages are mapped shared, so the kernel can run on behalf - of any task that makes a kernel entry. Shared does not mean they - are not protected, just that the ASID comparison is not performed. - -- Dan - - The IBM4xx has 256 contexts, so we can just rotate through these - as a way of "switching" contexts. If the TID of the TLB is zero, - the PID/TID comparison is disabled, so we can use a TID of zero - to represent all kernel pages as shared among all contexts. - -- Dan - */ - -static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) -{ -} - -#ifdef CONFIG_8xx -#define NO_CONTEXT 16 -#define LAST_CONTEXT 15 -#define FIRST_CONTEXT 0 - -#elif defined(CONFIG_4xx) -#define NO_CONTEXT 256 -#define LAST_CONTEXT 255 -#define FIRST_CONTEXT 1 - -#else - -/* PPC 6xx, 7xx CPUs */ -#define NO_CONTEXT ((unsigned long) -1) -#define LAST_CONTEXT 32767 -#define FIRST_CONTEXT 1 -#endif - -/* - * Set the current MMU context. - * On 32-bit PowerPCs (other than the 8xx embedded chips), this is done by - * loading up the segment registers for the user part of the address space. - * - * Since the PGD is immediately available, it is much faster to simply - * pass this along as a second parameter, which is required for 8xx and - * can be used for debugging on all processors (if you happen to have - * an Abatron). - */ -extern void set_context(unsigned long contextid, pgd_t *pgd); - -/* - * Bitmap of contexts in use. - * The size of this bitmap is LAST_CONTEXT + 1 bits. - */ -extern unsigned long context_map[]; - -/* - * This caches the next context number that we expect to be free. - * Its use is an optimization only, we can't rely on this context - * number to be free, but it usually will be. - */ -extern unsigned long next_mmu_context; - -/* - * If we don't have sufficient contexts to give one to every task - * that could be in the system, we need to be able to steal contexts. - * These variables support that. - */ -#if LAST_CONTEXT < 30000 -#define FEW_CONTEXTS 1 -extern atomic_t nr_free_contexts; -extern struct mm_struct *context_mm[LAST_CONTEXT+1]; -extern void steal_context(void); -#endif - -/* - * Get a new mmu context for the address space described by `mm'. - */ -static inline void get_mmu_context(struct mm_struct *mm) -{ - unsigned long ctx; - - if (mm->context.id != NO_CONTEXT) - return; -#ifdef FEW_CONTEXTS - while (atomic_dec_if_positive(&nr_free_contexts) < 0) - steal_context(); -#endif - ctx = next_mmu_context; - while (test_and_set_bit(ctx, context_map)) { - ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx); - if (ctx > LAST_CONTEXT) - ctx = 0; - } - next_mmu_context = (ctx + 1) & LAST_CONTEXT; - mm->context.id = ctx; -#ifdef FEW_CONTEXTS - context_mm[ctx] = mm; -#endif -} - -/* - * Set up the context for a new address space. - */ -static inline int init_new_context(struct task_struct *t, struct mm_struct *mm) -{ - mm->context.id = NO_CONTEXT; - mm->context.vdso_base = 0; - return 0; -} - -/* - * We're finished using the context for an address space. - */ -static inline void destroy_context(struct mm_struct *mm) -{ - preempt_disable(); - if (mm->context.id != NO_CONTEXT) { - clear_bit(mm->context.id, context_map); - mm->context.id = NO_CONTEXT; -#ifdef FEW_CONTEXTS - atomic_inc(&nr_free_contexts); -#endif - } - preempt_enable(); -} - -static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, - struct task_struct *tsk) -{ -#ifdef CONFIG_ALTIVEC - if (cpu_has_feature(CPU_FTR_ALTIVEC)) - asm volatile ("dssall;\n" -#ifndef CONFIG_POWER4 - "sync;\n" /* G4 needs a sync here, G5 apparently not */ -#endif - : : ); -#endif /* CONFIG_ALTIVEC */ - - tsk->thread.pgdir = next->pgd; - - /* No need to flush userspace segments if the mm doesnt change */ - if (prev == next) - return; - - /* Setup new userspace context */ - get_mmu_context(next); - set_context(next->context.id, next->pgd); -} - -#define deactivate_mm(tsk,mm) do { } while (0) - -/* - * After we have set current->mm to a new value, this activates - * the context for the new mm so we see the new mappings. - */ -#define activate_mm(active_mm, mm) switch_mm(active_mm, mm, current) - -extern void mmu_context_init(void); - -#endif /* __PPC_MMU_CONTEXT_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/mpc10x.h b/include/asm-ppc/mpc10x.h deleted file mode 100644 index b30a6a3b5bd2..000000000000 --- a/include/asm-ppc/mpc10x.h +++ /dev/null @@ -1,180 +0,0 @@ -/* - * Common routines for the Motorola SPS MPC106/8240/107 Host bridge/Mem - * ctlr/EPIC/etc. - * - * Author: Mark A. Greer - * mgreer@mvista.com - * - * 2001 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __PPC_KERNEL_MPC10X_H -#define __PPC_KERNEL_MPC10X_H - -#include <linux/pci_ids.h> -#include <asm/pci-bridge.h> - -/* - * The values here don't completely map everything but should work in most - * cases. - * - * MAP A (PReP Map) - * Processor: 0x80000000 - 0x807fffff -> PCI I/O: 0x00000000 - 0x007fffff - * Processor: 0xc0000000 - 0xdfffffff -> PCI MEM: 0x00000000 - 0x1fffffff - * PCI MEM: 0x80000000 -> Processor System Memory: 0x00000000 - * EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB) - * - * MAP B (CHRP Map) - * Processor: 0xfe000000 - 0xfebfffff -> PCI I/O: 0x00000000 - 0x00bfffff - * Processor: 0x80000000 - 0xbfffffff -> PCI MEM: 0x80000000 - 0xbfffffff - * PCI MEM: 0x00000000 -> Processor System Memory: 0x00000000 - * EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB) - */ - -/* - * Define the vendor/device IDs for the various bridges--should be added to - * <linux/pci_ids.h> - */ -#define MPC10X_BRIDGE_106 ((PCI_DEVICE_ID_MOTOROLA_MPC106 << 16) | \ - PCI_VENDOR_ID_MOTOROLA) -#define MPC10X_BRIDGE_8240 ((0x0003 << 16) | PCI_VENDOR_ID_MOTOROLA) -#define MPC10X_BRIDGE_107 ((0x0004 << 16) | PCI_VENDOR_ID_MOTOROLA) -#define MPC10X_BRIDGE_8245 ((0x0006 << 16) | PCI_VENDOR_ID_MOTOROLA) - -/* Define the type of map to use */ -#define MPC10X_MEM_MAP_A 1 -#define MPC10X_MEM_MAP_B 2 - -/* Map A (PReP Map) Defines */ -#define MPC10X_MAPA_CNFG_ADDR 0x80000cf8 -#define MPC10X_MAPA_CNFG_DATA 0x80000cfc - -#define MPC10X_MAPA_ISA_IO_BASE 0x80000000 -#define MPC10X_MAPA_ISA_MEM_BASE 0xc0000000 -#define MPC10X_MAPA_DRAM_OFFSET 0x80000000 - -#define MPC10X_MAPA_PCI_INTACK_ADDR 0xbffffff0 -#define MPC10X_MAPA_PCI_IO_START 0x00000000 -#define MPC10X_MAPA_PCI_IO_END (0x00800000 - 1) -#define MPC10X_MAPA_PCI_MEM_START 0x00000000 -#define MPC10X_MAPA_PCI_MEM_END (0x20000000 - 1) - -#define MPC10X_MAPA_PCI_MEM_OFFSET (MPC10X_MAPA_ISA_MEM_BASE - \ - MPC10X_MAPA_PCI_MEM_START) - -/* Map B (CHRP Map) Defines */ -#define MPC10X_MAPB_CNFG_ADDR 0xfec00000 -#define MPC10X_MAPB_CNFG_DATA 0xfee00000 - -#define MPC10X_MAPB_ISA_IO_BASE 0xfe000000 -#define MPC10X_MAPB_ISA_MEM_BASE 0x80000000 -#define MPC10X_MAPB_DRAM_OFFSET 0x00000000 - -#define MPC10X_MAPB_PCI_INTACK_ADDR 0xfef00000 -#define MPC10X_MAPB_PCI_IO_START 0x00000000 -#define MPC10X_MAPB_PCI_IO_END (0x00c00000 - 1) -#define MPC10X_MAPB_PCI_MEM_START 0x80000000 -#define MPC10X_MAPB_PCI_MEM_END (0xc0000000 - 1) - -#define MPC10X_MAPB_PCI_MEM_OFFSET (MPC10X_MAPB_ISA_MEM_BASE - \ - MPC10X_MAPB_PCI_MEM_START) - -/* Set hose members to values appropriate for the mem map used */ -#define MPC10X_SETUP_HOSE(hose, map) { \ - (hose)->pci_mem_offset = MPC10X_MAP##map##_PCI_MEM_OFFSET; \ - (hose)->io_space.start = MPC10X_MAP##map##_PCI_IO_START; \ - (hose)->io_space.end = MPC10X_MAP##map##_PCI_IO_END; \ - (hose)->mem_space.start = MPC10X_MAP##map##_PCI_MEM_START; \ - (hose)->mem_space.end = MPC10X_MAP##map##_PCI_MEM_END; \ - (hose)->io_base_virt = (void *)MPC10X_MAP##map##_ISA_IO_BASE; \ -} - - -/* Miscellaneous Configuration register offsets */ -#define MPC10X_CFG_PIR_REG 0x09 -#define MPC10X_CFG_PIR_HOST_BRIDGE 0x00 -#define MPC10X_CFG_PIR_AGENT 0x01 - -#define MPC10X_CFG_EUMBBAR 0x78 - -#define MPC10X_CFG_PICR1_REG 0xa8 -#define MPC10X_CFG_PICR1_ADDR_MAP_MASK 0x00010000 -#define MPC10X_CFG_PICR1_ADDR_MAP_A 0x00010000 -#define MPC10X_CFG_PICR1_ADDR_MAP_B 0x00000000 -#define MPC10X_CFG_PICR1_SPEC_PCI_RD 0x00000004 -#define MPC10X_CFG_PICR1_ST_GATH_EN 0x00000040 - -#define MPC10X_CFG_PICR2_REG 0xac -#define MPC10X_CFG_PICR2_COPYBACK_OPT 0x00000001 - -#define MPC10X_CFG_MAPB_OPTIONS_REG 0xe0 -#define MPC10X_CFG_MAPB_OPTIONS_CFAE 0x80 /* CPU_FD_ALIAS_EN */ -#define MPC10X_CFG_MAPB_OPTIONS_PFAE 0x40 /* PCI_FD_ALIAS_EN */ -#define MPC10X_CFG_MAPB_OPTIONS_DR 0x20 /* DLL_RESET */ -#define MPC10X_CFG_MAPB_OPTIONS_PCICH 0x08 /* PCI_COMPATIBILITY_HOLE */ -#define MPC10X_CFG_MAPB_OPTIONS_PROCCH 0x04 /* PROC_COMPATIBILITY_HOLE */ - -/* Define offsets for the memory controller registers in the config space */ -#define MPC10X_MCTLR_MEM_START_1 0x80 /* Banks 0-3 */ -#define MPC10X_MCTLR_MEM_START_2 0x84 /* Banks 4-7 */ -#define MPC10X_MCTLR_EXT_MEM_START_1 0x88 /* Banks 0-3 */ -#define MPC10X_MCTLR_EXT_MEM_START_2 0x8c /* Banks 4-7 */ - -#define MPC10X_MCTLR_MEM_END_1 0x90 /* Banks 0-3 */ -#define MPC10X_MCTLR_MEM_END_2 0x94 /* Banks 4-7 */ -#define MPC10X_MCTLR_EXT_MEM_END_1 0x98 /* Banks 0-3 */ -#define MPC10X_MCTLR_EXT_MEM_END_2 0x9c /* Banks 4-7 */ - -#define MPC10X_MCTLR_MEM_BANK_ENABLES 0xa0 - -/* Define some offset in the EUMB */ -#define MPC10X_EUMB_SIZE 0x00100000 /* Total EUMB size (1MB) */ - -#define MPC10X_EUMB_MU_OFFSET 0x00000000 /* Msg Unit reg offset */ -#define MPC10X_EUMB_MU_SIZE 0x00001000 /* Msg Unit reg size */ -#define MPC10X_EUMB_DMA_OFFSET 0x00001000 /* DMA Unit reg offset */ -#define MPC10X_EUMB_DMA_SIZE 0x00001000 /* DMA Unit reg size */ -#define MPC10X_EUMB_ATU_OFFSET 0x00002000 /* Addr xlate reg offset */ -#define MPC10X_EUMB_ATU_SIZE 0x00001000 /* Addr xlate reg size */ -#define MPC10X_EUMB_I2C_OFFSET 0x00003000 /* I2C Unit reg offset */ -#define MPC10X_EUMB_I2C_SIZE 0x00001000 /* I2C Unit reg size */ -#define MPC10X_EUMB_DUART_OFFSET 0x00004000 /* DUART Unit reg offset (8245) */ -#define MPC10X_EUMB_DUART_SIZE 0x00001000 /* DUART Unit reg size (8245) */ -#define MPC10X_EUMB_EPIC_OFFSET 0x00040000 /* EPIC offset in EUMB */ -#define MPC10X_EUMB_EPIC_SIZE 0x00030000 /* EPIC size */ -#define MPC10X_EUMB_PM_OFFSET 0x000fe000 /* Performance Monitor reg offset (8245) */ -#define MPC10X_EUMB_PM_SIZE 0x00001000 /* Performance Monitor reg size (8245) */ -#define MPC10X_EUMB_WP_OFFSET 0x000ff000 /* Data path diagnostic, watchpoint reg offset */ -#define MPC10X_EUMB_WP_SIZE 0x00001000 /* Data path diagnostic, watchpoint reg size */ - -/* - * Define some recommended places to put the EUMB regs. - * For both maps, recommend putting the EUMB from 0xeff00000 to 0xefffffff. - */ -extern unsigned long ioremap_base; -#define MPC10X_MAPA_EUMB_BASE (ioremap_base - MPC10X_EUMB_SIZE) -#define MPC10X_MAPB_EUMB_BASE MPC10X_MAPA_EUMB_BASE - -enum ppc_sys_devices { - MPC10X_IIC1, - MPC10X_DMA0, - MPC10X_DMA1, - MPC10X_UART0, - MPC10X_UART1, - NUM_PPC_SYS_DEVS, -}; - -int mpc10x_bridge_init(struct pci_controller *hose, - uint current_map, - uint new_map, - uint phys_eumb_base); -unsigned long mpc10x_get_mem_size(uint mem_map); -int mpc10x_enable_store_gathering(struct pci_controller *hose); -int mpc10x_disable_store_gathering(struct pci_controller *hose); - -/* For MPC107 boards that use the built-in openpic */ -void mpc10x_set_openpic(void); - -#endif /* __PPC_KERNEL_MPC10X_H */ diff --git a/include/asm-ppc/mpc52xx.h b/include/asm-ppc/mpc52xx.h deleted file mode 100644 index d9d21aa68ba3..000000000000 --- a/include/asm-ppc/mpc52xx.h +++ /dev/null @@ -1,450 +0,0 @@ -/* - * include/asm-ppc/mpc52xx.h - * - * Prototypes, etc. for the Freescale MPC52xx embedded cpu chips - * May need to be cleaned as the port goes on ... - * - * - * Maintainer : Sylvain Munaut <tnt@246tNt.com> - * - * Originally written by Dale Farnsworth <dfarnsworth@mvista.com> - * for the 2.4 kernel. - * - * Copyright (C) 2004-2005 Sylvain Munaut <tnt@246tNt.com> - * Copyright (C) 2003 MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#ifndef __ASM_MPC52xx_H__ -#define __ASM_MPC52xx_H__ - -#ifndef __ASSEMBLY__ -#include <asm/ppcboot.h> -#include <asm/types.h> - -struct pt_regs; -#endif /* __ASSEMBLY__ */ - - -/* ======================================================================== */ -/* PPC Sys devices definition */ -/* ======================================================================== */ - -enum ppc_sys_devices { - MPC52xx_MSCAN1, - MPC52xx_MSCAN2, - MPC52xx_SPI, - MPC52xx_USB, - MPC52xx_BDLC, - MPC52xx_PSC1, - MPC52xx_PSC2, - MPC52xx_PSC3, - MPC52xx_PSC4, - MPC52xx_PSC5, - MPC52xx_PSC6, - MPC52xx_FEC, - MPC52xx_ATA, - MPC52xx_I2C1, - MPC52xx_I2C2, - NUM_PPC_SYS_DEVS, -}; - - -/* ======================================================================== */ -/* Main registers/struct addresses */ -/* ======================================================================== */ - -/* MBAR position */ -#define MPC52xx_MBAR 0xf0000000 /* Phys address */ -#define MPC52xx_MBAR_VIRT 0xf0000000 /* Virt address */ -#define MPC52xx_MBAR_SIZE 0x00010000 - -#define MPC52xx_PA(x) ((phys_addr_t)(MPC52xx_MBAR + (x))) -#define MPC52xx_VA(x) ((void __iomem *)(MPC52xx_MBAR_VIRT + (x))) - -/* Registers zone offset/size */ -#define MPC52xx_MMAP_CTL_OFFSET 0x0000 -#define MPC52xx_MMAP_CTL_SIZE 0x068 -#define MPC52xx_SDRAM_OFFSET 0x0100 -#define MPC52xx_SDRAM_SIZE 0x010 -#define MPC52xx_CDM_OFFSET 0x0200 -#define MPC52xx_CDM_SIZE 0x038 -#define MPC52xx_INTR_OFFSET 0x0500 -#define MPC52xx_INTR_SIZE 0x04c -#define MPC52xx_GPTx_OFFSET(x) (0x0600 + ((x)<<4)) -#define MPC52xx_GPT_SIZE 0x010 -#define MPC52xx_RTC_OFFSET 0x0800 -#define MPC52xx_RTC_SIZE 0x024 -#define MPC52xx_GPIO_OFFSET 0x0b00 -#define MPC52xx_GPIO_SIZE 0x040 -#define MPC52xx_GPIO_WKUP_OFFSET 0x0c00 -#define MPC52xx_GPIO_WKUP_SIZE 0x028 -#define MPC52xx_PCI_OFFSET 0x0d00 -#define MPC52xx_PCI_SIZE 0x100 -#define MPC52xx_SDMA_OFFSET 0x1200 -#define MPC52xx_SDMA_SIZE 0x100 -#define MPC52xx_XLB_OFFSET 0x1f00 -#define MPC52xx_XLB_SIZE 0x100 -#define MPC52xx_PSCx_OFFSET(x) (((x)!=6)?(0x1e00+((x)<<9)):0x2c00) -#define MPC52xx_PSC_SIZE 0x0a0 - -/* SRAM used for SDMA */ -#define MPC52xx_SRAM_OFFSET 0x8000 -#define MPC52xx_SRAM_SIZE 0x4000 - - -/* ======================================================================== */ -/* IRQ mapping */ -/* ======================================================================== */ -/* Be sure to look at mpc52xx_pic.h if you wish for whatever reason to change - * this - */ - -#define MPC52xx_CRIT_IRQ_NUM 4 -#define MPC52xx_MAIN_IRQ_NUM 17 -#define MPC52xx_SDMA_IRQ_NUM 17 -#define MPC52xx_PERP_IRQ_NUM 23 - -#define MPC52xx_CRIT_IRQ_BASE 1 -#define MPC52xx_MAIN_IRQ_BASE (MPC52xx_CRIT_IRQ_BASE + MPC52xx_CRIT_IRQ_NUM) -#define MPC52xx_SDMA_IRQ_BASE (MPC52xx_MAIN_IRQ_BASE + MPC52xx_MAIN_IRQ_NUM) -#define MPC52xx_PERP_IRQ_BASE (MPC52xx_SDMA_IRQ_BASE + MPC52xx_SDMA_IRQ_NUM) - -#define MPC52xx_IRQ0 (MPC52xx_CRIT_IRQ_BASE + 0) -#define MPC52xx_SLICE_TIMER_0_IRQ (MPC52xx_CRIT_IRQ_BASE + 1) -#define MPC52xx_HI_INT_IRQ (MPC52xx_CRIT_IRQ_BASE + 2) -#define MPC52xx_CCS_IRQ (MPC52xx_CRIT_IRQ_BASE + 3) - -#define MPC52xx_IRQ1 (MPC52xx_MAIN_IRQ_BASE + 1) -#define MPC52xx_IRQ2 (MPC52xx_MAIN_IRQ_BASE + 2) -#define MPC52xx_IRQ3 (MPC52xx_MAIN_IRQ_BASE + 3) - -#define MPC52xx_SDMA_IRQ (MPC52xx_PERP_IRQ_BASE + 0) -#define MPC52xx_PSC1_IRQ (MPC52xx_PERP_IRQ_BASE + 1) -#define MPC52xx_PSC2_IRQ (MPC52xx_PERP_IRQ_BASE + 2) -#define MPC52xx_PSC3_IRQ (MPC52xx_PERP_IRQ_BASE + 3) -#define MPC52xx_PSC6_IRQ (MPC52xx_PERP_IRQ_BASE + 4) -#define MPC52xx_IRDA_IRQ (MPC52xx_PERP_IRQ_BASE + 4) -#define MPC52xx_FEC_IRQ (MPC52xx_PERP_IRQ_BASE + 5) -#define MPC52xx_USB_IRQ (MPC52xx_PERP_IRQ_BASE + 6) -#define MPC52xx_ATA_IRQ (MPC52xx_PERP_IRQ_BASE + 7) -#define MPC52xx_PCI_CNTRL_IRQ (MPC52xx_PERP_IRQ_BASE + 8) -#define MPC52xx_PCI_SCIRX_IRQ (MPC52xx_PERP_IRQ_BASE + 9) -#define MPC52xx_PCI_SCITX_IRQ (MPC52xx_PERP_IRQ_BASE + 10) -#define MPC52xx_PSC4_IRQ (MPC52xx_PERP_IRQ_BASE + 11) -#define MPC52xx_PSC5_IRQ (MPC52xx_PERP_IRQ_BASE + 12) -#define MPC52xx_SPI_MODF_IRQ (MPC52xx_PERP_IRQ_BASE + 13) -#define MPC52xx_SPI_SPIF_IRQ (MPC52xx_PERP_IRQ_BASE + 14) -#define MPC52xx_I2C1_IRQ (MPC52xx_PERP_IRQ_BASE + 15) -#define MPC52xx_I2C2_IRQ (MPC52xx_PERP_IRQ_BASE + 16) -#define MPC52xx_MSCAN1_IRQ (MPC52xx_PERP_IRQ_BASE + 17) -#define MPC52xx_MSCAN2_IRQ (MPC52xx_PERP_IRQ_BASE + 18) -#define MPC52xx_IR_RX_IRQ (MPC52xx_PERP_IRQ_BASE + 19) -#define MPC52xx_IR_TX_IRQ (MPC52xx_PERP_IRQ_BASE + 20) -#define MPC52xx_XLB_ARB_IRQ (MPC52xx_PERP_IRQ_BASE + 21) -#define MPC52xx_BDLC_IRQ (MPC52xx_PERP_IRQ_BASE + 22) - - - -/* ======================================================================== */ -/* Structures mapping of some unit register set */ -/* ======================================================================== */ - -#ifndef __ASSEMBLY__ - -/* Memory Mapping Control */ -struct mpc52xx_mmap_ctl { - u32 mbar; /* MMAP_CTRL + 0x00 */ - - u32 cs0_start; /* MMAP_CTRL + 0x04 */ - u32 cs0_stop; /* MMAP_CTRL + 0x08 */ - u32 cs1_start; /* MMAP_CTRL + 0x0c */ - u32 cs1_stop; /* MMAP_CTRL + 0x10 */ - u32 cs2_start; /* MMAP_CTRL + 0x14 */ - u32 cs2_stop; /* MMAP_CTRL + 0x18 */ - u32 cs3_start; /* MMAP_CTRL + 0x1c */ - u32 cs3_stop; /* MMAP_CTRL + 0x20 */ - u32 cs4_start; /* MMAP_CTRL + 0x24 */ - u32 cs4_stop; /* MMAP_CTRL + 0x28 */ - u32 cs5_start; /* MMAP_CTRL + 0x2c */ - u32 cs5_stop; /* MMAP_CTRL + 0x30 */ - - u32 sdram0; /* MMAP_CTRL + 0x34 */ - u32 sdram1; /* MMAP_CTRL + 0X38 */ - - u32 reserved[4]; /* MMAP_CTRL + 0x3c .. 0x48 */ - - u32 boot_start; /* MMAP_CTRL + 0x4c */ - u32 boot_stop; /* MMAP_CTRL + 0x50 */ - - u32 ipbi_ws_ctrl; /* MMAP_CTRL + 0x54 */ - - u32 cs6_start; /* MMAP_CTRL + 0x58 */ - u32 cs6_stop; /* MMAP_CTRL + 0x5c */ - u32 cs7_start; /* MMAP_CTRL + 0x60 */ - u32 cs7_stop; /* MMAP_CTRL + 0x64 */ -}; - -/* SDRAM control */ -struct mpc52xx_sdram { - u32 mode; /* SDRAM + 0x00 */ - u32 ctrl; /* SDRAM + 0x04 */ - u32 config1; /* SDRAM + 0x08 */ - u32 config2; /* SDRAM + 0x0c */ -}; - -/* Interrupt controller */ -struct mpc52xx_intr { - u32 per_mask; /* INTR + 0x00 */ - u32 per_pri1; /* INTR + 0x04 */ - u32 per_pri2; /* INTR + 0x08 */ - u32 per_pri3; /* INTR + 0x0c */ - u32 ctrl; /* INTR + 0x10 */ - u32 main_mask; /* INTR + 0x14 */ - u32 main_pri1; /* INTR + 0x18 */ - u32 main_pri2; /* INTR + 0x1c */ - u32 reserved1; /* INTR + 0x20 */ - u32 enc_status; /* INTR + 0x24 */ - u32 crit_status; /* INTR + 0x28 */ - u32 main_status; /* INTR + 0x2c */ - u32 per_status; /* INTR + 0x30 */ - u32 reserved2; /* INTR + 0x34 */ - u32 per_error; /* INTR + 0x38 */ -}; - -/* SDMA */ -struct mpc52xx_sdma { - u32 taskBar; /* SDMA + 0x00 */ - u32 currentPointer; /* SDMA + 0x04 */ - u32 endPointer; /* SDMA + 0x08 */ - u32 variablePointer;/* SDMA + 0x0c */ - - u8 IntVect1; /* SDMA + 0x10 */ - u8 IntVect2; /* SDMA + 0x11 */ - u16 PtdCntrl; /* SDMA + 0x12 */ - - u32 IntPend; /* SDMA + 0x14 */ - u32 IntMask; /* SDMA + 0x18 */ - - u16 tcr[16]; /* SDMA + 0x1c .. 0x3a */ - - u8 ipr[32]; /* SDMA + 0x3c .. 0x5b */ - - u32 cReqSelect; /* SDMA + 0x5c */ - u32 task_size0; /* SDMA + 0x60 */ - u32 task_size1; /* SDMA + 0x64 */ - u32 MDEDebug; /* SDMA + 0x68 */ - u32 ADSDebug; /* SDMA + 0x6c */ - u32 Value1; /* SDMA + 0x70 */ - u32 Value2; /* SDMA + 0x74 */ - u32 Control; /* SDMA + 0x78 */ - u32 Status; /* SDMA + 0x7c */ - u32 PTDDebug; /* SDMA + 0x80 */ -}; - -/* GPT */ -struct mpc52xx_gpt { - u32 mode; /* GPTx + 0x00 */ - u32 count; /* GPTx + 0x04 */ - u32 pwm; /* GPTx + 0x08 */ - u32 status; /* GPTx + 0X0c */ -}; - -/* RTC */ -struct mpc52xx_rtc { - u32 time_set; /* RTC + 0x00 */ - u32 date_set; /* RTC + 0x04 */ - u32 stopwatch; /* RTC + 0x08 */ - u32 int_enable; /* RTC + 0x0c */ - u32 time; /* RTC + 0x10 */ - u32 date; /* RTC + 0x14 */ - u32 stopwatch_intr; /* RTC + 0x18 */ - u32 bus_error; /* RTC + 0x1c */ - u32 dividers; /* RTC + 0x20 */ -}; - -/* GPIO */ -struct mpc52xx_gpio { - u32 port_config; /* GPIO + 0x00 */ - u32 simple_gpioe; /* GPIO + 0x04 */ - u32 simple_ode; /* GPIO + 0x08 */ - u32 simple_ddr; /* GPIO + 0x0c */ - u32 simple_dvo; /* GPIO + 0x10 */ - u32 simple_ival; /* GPIO + 0x14 */ - u8 outo_gpioe; /* GPIO + 0x18 */ - u8 reserved1[3]; /* GPIO + 0x19 */ - u8 outo_dvo; /* GPIO + 0x1c */ - u8 reserved2[3]; /* GPIO + 0x1d */ - u8 sint_gpioe; /* GPIO + 0x20 */ - u8 reserved3[3]; /* GPIO + 0x21 */ - u8 sint_ode; /* GPIO + 0x24 */ - u8 reserved4[3]; /* GPIO + 0x25 */ - u8 sint_ddr; /* GPIO + 0x28 */ - u8 reserved5[3]; /* GPIO + 0x29 */ - u8 sint_dvo; /* GPIO + 0x2c */ - u8 reserved6[3]; /* GPIO + 0x2d */ - u8 sint_inten; /* GPIO + 0x30 */ - u8 reserved7[3]; /* GPIO + 0x31 */ - u16 sint_itype; /* GPIO + 0x34 */ - u16 reserved8; /* GPIO + 0x36 */ - u8 gpio_control; /* GPIO + 0x38 */ - u8 reserved9[3]; /* GPIO + 0x39 */ - u8 sint_istat; /* GPIO + 0x3c */ - u8 sint_ival; /* GPIO + 0x3d */ - u8 bus_errs; /* GPIO + 0x3e */ - u8 reserved10; /* GPIO + 0x3f */ -}; - -#define MPC52xx_GPIO_PSC_CONFIG_UART_WITHOUT_CD 4 -#define MPC52xx_GPIO_PSC_CONFIG_UART_WITH_CD 5 -#define MPC52xx_GPIO_PCI_DIS (1<<15) - -/* GPIO with WakeUp*/ -struct mpc52xx_gpio_wkup { - u8 wkup_gpioe; /* GPIO_WKUP + 0x00 */ - u8 reserved1[3]; /* GPIO_WKUP + 0x03 */ - u8 wkup_ode; /* GPIO_WKUP + 0x04 */ - u8 reserved2[3]; /* GPIO_WKUP + 0x05 */ - u8 wkup_ddr; /* GPIO_WKUP + 0x08 */ - u8 reserved3[3]; /* GPIO_WKUP + 0x09 */ - u8 wkup_dvo; /* GPIO_WKUP + 0x0C */ - u8 reserved4[3]; /* GPIO_WKUP + 0x0D */ - u8 wkup_inten; /* GPIO_WKUP + 0x10 */ - u8 reserved5[3]; /* GPIO_WKUP + 0x11 */ - u8 wkup_iinten; /* GPIO_WKUP + 0x14 */ - u8 reserved6[3]; /* GPIO_WKUP + 0x15 */ - u16 wkup_itype; /* GPIO_WKUP + 0x18 */ - u8 reserved7[2]; /* GPIO_WKUP + 0x1A */ - u8 wkup_maste; /* GPIO_WKUP + 0x1C */ - u8 reserved8[3]; /* GPIO_WKUP + 0x1D */ - u8 wkup_ival; /* GPIO_WKUP + 0x20 */ - u8 reserved9[3]; /* GPIO_WKUP + 0x21 */ - u8 wkup_istat; /* GPIO_WKUP + 0x24 */ - u8 reserved10[3]; /* GPIO_WKUP + 0x25 */ -}; - -/* XLB Bus control */ -struct mpc52xx_xlb { - u8 reserved[0x40]; - u32 config; /* XLB + 0x40 */ - u32 version; /* XLB + 0x44 */ - u32 status; /* XLB + 0x48 */ - u32 int_enable; /* XLB + 0x4c */ - u32 addr_capture; /* XLB + 0x50 */ - u32 bus_sig_capture; /* XLB + 0x54 */ - u32 addr_timeout; /* XLB + 0x58 */ - u32 data_timeout; /* XLB + 0x5c */ - u32 bus_act_timeout; /* XLB + 0x60 */ - u32 master_pri_enable; /* XLB + 0x64 */ - u32 master_priority; /* XLB + 0x68 */ - u32 base_address; /* XLB + 0x6c */ - u32 snoop_window; /* XLB + 0x70 */ -}; - -#define MPC52xx_XLB_CFG_PLDIS (1 << 31) -#define MPC52xx_XLB_CFG_SNOOP (1 << 15) - -/* Clock Distribution control */ -struct mpc52xx_cdm { - u32 jtag_id; /* CDM + 0x00 reg0 read only */ - u32 rstcfg; /* CDM + 0x04 reg1 read only */ - u32 breadcrumb; /* CDM + 0x08 reg2 */ - - u8 mem_clk_sel; /* CDM + 0x0c reg3 byte0 */ - u8 xlb_clk_sel; /* CDM + 0x0d reg3 byte1 read only */ - u8 ipb_clk_sel; /* CDM + 0x0e reg3 byte2 */ - u8 pci_clk_sel; /* CDM + 0x0f reg3 byte3 */ - - u8 ext_48mhz_en; /* CDM + 0x10 reg4 byte0 */ - u8 fd_enable; /* CDM + 0x11 reg4 byte1 */ - u16 fd_counters; /* CDM + 0x12 reg4 byte2,3 */ - - u32 clk_enables; /* CDM + 0x14 reg5 */ - - u8 osc_disable; /* CDM + 0x18 reg6 byte0 */ - u8 reserved0[3]; /* CDM + 0x19 reg6 byte1,2,3 */ - - u8 ccs_sleep_enable; /* CDM + 0x1c reg7 byte0 */ - u8 osc_sleep_enable; /* CDM + 0x1d reg7 byte1 */ - u8 reserved1; /* CDM + 0x1e reg7 byte2 */ - u8 ccs_qreq_test; /* CDM + 0x1f reg7 byte3 */ - - u8 soft_reset; /* CDM + 0x20 u8 byte0 */ - u8 no_ckstp; /* CDM + 0x21 u8 byte0 */ - u8 reserved2[2]; /* CDM + 0x22 u8 byte1,2,3 */ - - u8 pll_lock; /* CDM + 0x24 reg9 byte0 */ - u8 pll_looselock; /* CDM + 0x25 reg9 byte1 */ - u8 pll_sm_lockwin; /* CDM + 0x26 reg9 byte2 */ - u8 reserved3; /* CDM + 0x27 reg9 byte3 */ - - u16 reserved4; /* CDM + 0x28 reg10 byte0,1 */ - u16 mclken_div_psc1; /* CDM + 0x2a reg10 byte2,3 */ - - u16 reserved5; /* CDM + 0x2c reg11 byte0,1 */ - u16 mclken_div_psc2; /* CDM + 0x2e reg11 byte2,3 */ - - u16 reserved6; /* CDM + 0x30 reg12 byte0,1 */ - u16 mclken_div_psc3; /* CDM + 0x32 reg12 byte2,3 */ - - u16 reserved7; /* CDM + 0x34 reg13 byte0,1 */ - u16 mclken_div_psc6; /* CDM + 0x36 reg13 byte2,3 */ -}; - -#endif /* __ASSEMBLY__ */ - - -/* ========================================================================= */ -/* Prototypes for MPC52xx syslib */ -/* ========================================================================= */ - -#ifndef __ASSEMBLY__ - -extern void mpc52xx_init_irq(void); -extern int mpc52xx_get_irq(void); - -extern unsigned long mpc52xx_find_end_of_memory(void); -extern void mpc52xx_set_bat(void); -extern void mpc52xx_map_io(void); -extern void mpc52xx_restart(char *cmd); -extern void mpc52xx_halt(void); -extern void mpc52xx_power_off(void); -extern void mpc52xx_progress(char *s, unsigned short hex); -extern void mpc52xx_calibrate_decr(void); - -extern void mpc52xx_find_bridges(void); - -extern void mpc52xx_setup_cpu(void); - - - - /* Matching of PSC function */ -struct mpc52xx_psc_func { - int id; - char *func; -}; - -extern int mpc52xx_match_psc_function(int psc_idx, const char *func); -extern struct mpc52xx_psc_func mpc52xx_psc_functions[]; - /* This array is to be defined in platform file */ - -#endif /* __ASSEMBLY__ */ - - -/* ========================================================================= */ -/* Platform configuration */ -/* ========================================================================= */ - -/* The U-Boot platform information struct */ -extern bd_t __res; - -/* Platform options */ -#if defined(CONFIG_LITE5200) -#include <platforms/lite5200.h> -#endif - - -#endif /* __ASM_MPC52xx_H__ */ diff --git a/include/asm-ppc/mpc52xx_psc.h b/include/asm-ppc/mpc52xx_psc.h deleted file mode 100644 index 39fcd02cd4e8..000000000000 --- a/include/asm-ppc/mpc52xx_psc.h +++ /dev/null @@ -1,200 +0,0 @@ -/* - * include/asm-ppc/mpc52xx_psc.h - * - * Definitions of consts/structs to drive the Freescale MPC52xx OnChip - * PSCs. Theses are shared between multiple drivers since a PSC can be - * UART, AC97, IR, I2S, ... So this header is in asm-ppc. - * - * - * Maintainer : Sylvain Munaut <tnt@246tNt.com> - * - * Based/Extracted from some header of the 2.4 originally written by - * Dale Farnsworth <dfarnsworth@mvista.com> - * - * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com> - * Copyright (C) 2003 MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#ifndef __ASM_MPC52xx_PSC_H__ -#define __ASM_MPC52xx_PSC_H__ - -#include <asm/types.h> - -/* Max number of PSCs */ -#define MPC52xx_PSC_MAXNUM 6 - -/* Programmable Serial Controller (PSC) status register bits */ -#define MPC52xx_PSC_SR_UNEX_RX 0x0001 -#define MPC52xx_PSC_SR_DATA_VAL 0x0002 -#define MPC52xx_PSC_SR_DATA_OVR 0x0004 -#define MPC52xx_PSC_SR_CMDSEND 0x0008 -#define MPC52xx_PSC_SR_CDE 0x0080 -#define MPC52xx_PSC_SR_RXRDY 0x0100 -#define MPC52xx_PSC_SR_RXFULL 0x0200 -#define MPC52xx_PSC_SR_TXRDY 0x0400 -#define MPC52xx_PSC_SR_TXEMP 0x0800 -#define MPC52xx_PSC_SR_OE 0x1000 -#define MPC52xx_PSC_SR_PE 0x2000 -#define MPC52xx_PSC_SR_FE 0x4000 -#define MPC52xx_PSC_SR_RB 0x8000 - -/* PSC Command values */ -#define MPC52xx_PSC_RX_ENABLE 0x0001 -#define MPC52xx_PSC_RX_DISABLE 0x0002 -#define MPC52xx_PSC_TX_ENABLE 0x0004 -#define MPC52xx_PSC_TX_DISABLE 0x0008 -#define MPC52xx_PSC_SEL_MODE_REG_1 0x0010 -#define MPC52xx_PSC_RST_RX 0x0020 -#define MPC52xx_PSC_RST_TX 0x0030 -#define MPC52xx_PSC_RST_ERR_STAT 0x0040 -#define MPC52xx_PSC_RST_BRK_CHG_INT 0x0050 -#define MPC52xx_PSC_START_BRK 0x0060 -#define MPC52xx_PSC_STOP_BRK 0x0070 - -/* PSC TxRx FIFO status bits */ -#define MPC52xx_PSC_RXTX_FIFO_ERR 0x0040 -#define MPC52xx_PSC_RXTX_FIFO_UF 0x0020 -#define MPC52xx_PSC_RXTX_FIFO_OF 0x0010 -#define MPC52xx_PSC_RXTX_FIFO_FR 0x0008 -#define MPC52xx_PSC_RXTX_FIFO_FULL 0x0004 -#define MPC52xx_PSC_RXTX_FIFO_ALARM 0x0002 -#define MPC52xx_PSC_RXTX_FIFO_EMPTY 0x0001 - -/* PSC interrupt mask bits */ -#define MPC52xx_PSC_IMR_TXRDY 0x0100 -#define MPC52xx_PSC_IMR_RXRDY 0x0200 -#define MPC52xx_PSC_IMR_DB 0x0400 -#define MPC52xx_PSC_IMR_IPC 0x8000 - -/* PSC input port change bit */ -#define MPC52xx_PSC_CTS 0x01 -#define MPC52xx_PSC_DCD 0x02 -#define MPC52xx_PSC_D_CTS 0x10 -#define MPC52xx_PSC_D_DCD 0x20 - -/* PSC mode fields */ -#define MPC52xx_PSC_MODE_5_BITS 0x00 -#define MPC52xx_PSC_MODE_6_BITS 0x01 -#define MPC52xx_PSC_MODE_7_BITS 0x02 -#define MPC52xx_PSC_MODE_8_BITS 0x03 -#define MPC52xx_PSC_MODE_BITS_MASK 0x03 -#define MPC52xx_PSC_MODE_PAREVEN 0x00 -#define MPC52xx_PSC_MODE_PARODD 0x04 -#define MPC52xx_PSC_MODE_PARFORCE 0x08 -#define MPC52xx_PSC_MODE_PARNONE 0x10 -#define MPC52xx_PSC_MODE_ERR 0x20 -#define MPC52xx_PSC_MODE_FFULL 0x40 -#define MPC52xx_PSC_MODE_RXRTS 0x80 - -#define MPC52xx_PSC_MODE_ONE_STOP_5_BITS 0x00 -#define MPC52xx_PSC_MODE_ONE_STOP 0x07 -#define MPC52xx_PSC_MODE_TWO_STOP 0x0f - -#define MPC52xx_PSC_RFNUM_MASK 0x01ff - - -/* Structure of the hardware registers */ -struct mpc52xx_psc { - u8 mode; /* PSC + 0x00 */ - u8 reserved0[3]; - union { /* PSC + 0x04 */ - u16 status; - u16 clock_select; - } sr_csr; -#define mpc52xx_psc_status sr_csr.status -#define mpc52xx_psc_clock_select sr_csr.clock_select - u16 reserved1; - u8 command; /* PSC + 0x08 */ - u8 reserved2[3]; - union { /* PSC + 0x0c */ - u8 buffer_8; - u16 buffer_16; - u32 buffer_32; - } buffer; -#define mpc52xx_psc_buffer_8 buffer.buffer_8 -#define mpc52xx_psc_buffer_16 buffer.buffer_16 -#define mpc52xx_psc_buffer_32 buffer.buffer_32 - union { /* PSC + 0x10 */ - u8 ipcr; - u8 acr; - } ipcr_acr; -#define mpc52xx_psc_ipcr ipcr_acr.ipcr -#define mpc52xx_psc_acr ipcr_acr.acr - u8 reserved3[3]; - union { /* PSC + 0x14 */ - u16 isr; - u16 imr; - } isr_imr; -#define mpc52xx_psc_isr isr_imr.isr -#define mpc52xx_psc_imr isr_imr.imr - u16 reserved4; - u8 ctur; /* PSC + 0x18 */ - u8 reserved5[3]; - u8 ctlr; /* PSC + 0x1c */ - u8 reserved6[3]; - u32 ccr; /* PSC + 0x20 */ - u32 ac97_slots; /* PSC + 0x24 */ - u32 ac97_cmd; /* PSC + 0x28 */ - u32 ac97_data; /* PSC + 0x2c */ - u8 ivr; /* PSC + 0x30 */ - u8 reserved8[3]; - u8 ip; /* PSC + 0x34 */ - u8 reserved9[3]; - u8 op1; /* PSC + 0x38 */ - u8 reserved10[3]; - u8 op0; /* PSC + 0x3c */ - u8 reserved11[3]; - u32 sicr; /* PSC + 0x40 */ - u8 ircr1; /* PSC + 0x44 */ - u8 reserved13[3]; - u8 ircr2; /* PSC + 0x44 */ - u8 reserved14[3]; - u8 irsdr; /* PSC + 0x4c */ - u8 reserved15[3]; - u8 irmdr; /* PSC + 0x50 */ - u8 reserved16[3]; - u8 irfdr; /* PSC + 0x54 */ - u8 reserved17[3]; -}; - -struct mpc52xx_psc_fifo { - u16 rfnum; /* PSC + 0x58 */ - u16 reserved18; - u16 tfnum; /* PSC + 0x5c */ - u16 reserved19; - u32 rfdata; /* PSC + 0x60 */ - u16 rfstat; /* PSC + 0x64 */ - u16 reserved20; - u8 rfcntl; /* PSC + 0x68 */ - u8 reserved21[5]; - u16 rfalarm; /* PSC + 0x6e */ - u16 reserved22; - u16 rfrptr; /* PSC + 0x72 */ - u16 reserved23; - u16 rfwptr; /* PSC + 0x76 */ - u16 reserved24; - u16 rflrfptr; /* PSC + 0x7a */ - u16 reserved25; - u16 rflwfptr; /* PSC + 0x7e */ - u32 tfdata; /* PSC + 0x80 */ - u16 tfstat; /* PSC + 0x84 */ - u16 reserved26; - u8 tfcntl; /* PSC + 0x88 */ - u8 reserved27[5]; - u16 tfalarm; /* PSC + 0x8e */ - u16 reserved28; - u16 tfrptr; /* PSC + 0x92 */ - u16 reserved29; - u16 tfwptr; /* PSC + 0x96 */ - u16 reserved30; - u16 tflrfptr; /* PSC + 0x9a */ - u16 reserved31; - u16 tflwfptr; /* PSC + 0x9e */ -}; - - -#endif /* __ASM_MPC52xx_PSC_H__ */ diff --git a/include/asm-ppc/mpc8260.h b/include/asm-ppc/mpc8260.h deleted file mode 100644 index 402ba15c2e80..000000000000 --- a/include/asm-ppc/mpc8260.h +++ /dev/null @@ -1,98 +0,0 @@ -/* - * Since there are many different boards and no standard configuration, - * we have a unique include file for each. Rather than change every - * file that has to include MPC8260 configuration, they all include - * this one and the configuration switching is done here. - */ -#ifdef __KERNEL__ -#ifndef __ASM_PPC_MPC8260_H__ -#define __ASM_PPC_MPC8260_H__ - - -#ifdef CONFIG_8260 - -#ifdef CONFIG_EST8260 -#include <platforms/est8260.h> -#endif - -#ifdef CONFIG_SBC82xx -#include <platforms/sbc82xx.h> -#endif - -#ifdef CONFIG_SBS8260 -#include <platforms/sbs8260.h> -#endif - -#ifdef CONFIG_RPX8260 -#include <platforms/rpx8260.h> -#endif - -#ifdef CONFIG_WILLOW -#include <platforms/willow.h> -#endif - -#ifdef CONFIG_TQM8260 -#include <platforms/tqm8260.h> -#endif - -#ifdef CONFIG_PCI_8260 -#include <syslib/m82xx_pci.h> -#endif - -/* Make sure the memory translation stuff is there if PCI not used. - */ -#ifndef _IO_BASE -#define _IO_BASE 0 -#endif - -#ifndef _ISA_MEM_BASE -#define _ISA_MEM_BASE 0 -#endif - -#ifndef PCI_DRAM_OFFSET -#define PCI_DRAM_OFFSET 0 -#endif - -/* Map 256MB I/O region - */ -#ifndef IO_PHYS_ADDR -#define IO_PHYS_ADDR 0xe0000000 -#endif -#ifndef IO_VIRT_ADDR -#define IO_VIRT_ADDR IO_PHYS_ADDR -#endif - -enum ppc_sys_devices { - MPC82xx_CPM_FCC1, - MPC82xx_CPM_FCC2, - MPC82xx_CPM_FCC3, - MPC82xx_CPM_I2C, - MPC82xx_CPM_SCC1, - MPC82xx_CPM_SCC2, - MPC82xx_CPM_SCC3, - MPC82xx_CPM_SCC4, - MPC82xx_CPM_SPI, - MPC82xx_CPM_MCC1, - MPC82xx_CPM_MCC2, - MPC82xx_CPM_SMC1, - MPC82xx_CPM_SMC2, - MPC82xx_CPM_USB, - MPC82xx_SEC1, - MPC82xx_MDIO_BB, - NUM_PPC_SYS_DEVS, -}; - -#ifndef __ASSEMBLY__ -/* The "residual" data board information structure the boot loader - * hands to us. - */ -extern unsigned char __res[]; -#endif - -#ifndef BOARD_CHIP_NAME -#define BOARD_CHIP_NAME "" -#endif - -#endif /* CONFIG_8260 */ -#endif /* !__ASM_PPC_MPC8260_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/mpc8260_pci9.h b/include/asm-ppc/mpc8260_pci9.h deleted file mode 100644 index 9f7176881c56..000000000000 --- a/include/asm-ppc/mpc8260_pci9.h +++ /dev/null @@ -1,47 +0,0 @@ -/* include/asm-ppc/mpc8260_pci9.h - * - * Undefine the PCI read* and in* macros so we can define them as functions - * that implement the workaround for the MPC8260 device erratum PCI 9. - * - * This header file should only be included at the end of include/asm-ppc/io.h - * and never included directly anywhere else. - * - * Author: andy_lowe@mvista.com - * - * 2003 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef _PPC_IO_H -#error "Do not include mpc8260_pci9.h directly." -#endif - -#ifdef __KERNEL__ -#ifndef __CONFIG_8260_PCI9_DEFS -#define __CONFIG_8260_PCI9_DEFS - -#undef readb -#undef readw -#undef readl -#undef insb -#undef insw -#undef insl -#undef inb -#undef inw -#undef inl -#undef memcpy_fromio - -extern int readb(volatile unsigned char *addr); -extern int readw(volatile unsigned short *addr); -extern unsigned readl(volatile unsigned *addr); -extern void insb(unsigned port, void *buf, int ns); -extern void insw(unsigned port, void *buf, int ns); -extern void insl(unsigned port, void *buf, int nl); -extern int inb(unsigned port); -extern int inw(unsigned port); -extern unsigned inl(unsigned port); -extern void *memcpy_fromio(void *dest, unsigned long src, size_t count); - -#endif /* !__CONFIG_8260_PCI9_DEFS */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/mpc8xx.h b/include/asm-ppc/mpc8xx.h deleted file mode 100644 index b9e3060b0278..000000000000 --- a/include/asm-ppc/mpc8xx.h +++ /dev/null @@ -1,122 +0,0 @@ -/* This is the single file included by all MPC8xx build options. - * Since there are many different boards and no standard configuration, - * we have a unique include file for each. Rather than change every - * file that has to include MPC8xx configuration, they all include - * this one and the configuration switching is done here. - */ -#ifdef __KERNEL__ -#ifndef __CONFIG_8xx_DEFS -#define __CONFIG_8xx_DEFS - - -#ifdef CONFIG_8xx - -#ifdef CONFIG_MBX -#include <platforms/mbx.h> -#endif - -#ifdef CONFIG_FADS -#include <platforms/fads.h> -#endif - -#ifdef CONFIG_RPXLITE -#include <platforms/rpxlite.h> -#endif - -#ifdef CONFIG_BSEIP -#include <platforms/bseip.h> -#endif - -#ifdef CONFIG_RPXCLASSIC -#include <platforms/rpxclassic.h> -#endif - -#if defined(CONFIG_TQM8xxL) -#include <platforms/tqm8xx.h> -#endif - -#if defined(CONFIG_IVMS8) || defined(CONFIG_IVML24) -#include <platforms/ivms8.h> -#endif - -#if defined(CONFIG_HERMES_PRO) -#include <platforms/hermes.h> -#endif - -#if defined(CONFIG_IP860) -#include <platforms/ip860.h> -#endif - -#if defined(CONFIG_LWMON) -#include <platforms/lwmon.h> -#endif - -#if defined(CONFIG_PCU_E) -#include <platforms/pcu_e.h> -#endif - -#if defined(CONFIG_CCM) -#include <platforms/ccm.h> -#endif - -#if defined(CONFIG_LANTEC) -#include <platforms/lantec.h> -#endif - -/* Currently, all 8xx boards that support a processor to PCI/ISA bridge - * use the same memory map. - */ -#if 0 -#if defined(CONFIG_PCI) && defined(PCI_ISA_IO_ADDR) -#define _IO_BASE PCI_ISA_IO_ADDR -#define _ISA_MEM_BASE PCI_ISA_MEM_ADDR -#define PCI_DRAM_OFFSET 0x80000000 -#else -#define _IO_BASE 0 -#define _ISA_MEM_BASE 0 -#define PCI_DRAM_OFFSET 0 -#endif -#else -#if !defined(_IO_BASE) /* defined in board specific header */ -#define _IO_BASE 0 -#endif -#define _ISA_MEM_BASE 0 -#define PCI_DRAM_OFFSET 0 -#endif - -#ifndef __ASSEMBLY__ -/* The "residual" data board information structure the boot loader - * hands to us. - */ -extern unsigned char __res[]; - -struct pt_regs; - -enum ppc_sys_devices { - MPC8xx_CPM_FEC1, - MPC8xx_CPM_FEC2, - MPC8xx_CPM_I2C, - MPC8xx_CPM_SCC1, - MPC8xx_CPM_SCC2, - MPC8xx_CPM_SCC3, - MPC8xx_CPM_SCC4, - MPC8xx_CPM_SPI, - MPC8xx_CPM_MCC1, - MPC8xx_CPM_MCC2, - MPC8xx_CPM_SMC1, - MPC8xx_CPM_SMC2, - MPC8xx_CPM_USB, - MPC8xx_MDIO_FEC, - NUM_PPC_SYS_DEVS, -}; - -#define PPC_PIN_SIZE (24 * 1024 * 1024) /* 24Mbytes of data pinned */ - -#ifndef BOARD_CHIP_NAME -#define BOARD_CHIP_NAME "" -#endif - -#endif /* !__ASSEMBLY__ */ -#endif /* CONFIG_8xx */ -#endif /* __CONFIG_8xx_DEFS */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/mv64x60.h b/include/asm-ppc/mv64x60.h deleted file mode 100644 index 2963d6aa3ea5..000000000000 --- a/include/asm-ppc/mv64x60.h +++ /dev/null @@ -1,353 +0,0 @@ -/* - * include/asm-ppc/mv64x60.h - * - * Prototypes, etc. for the Marvell/Galileo MV64x60 host bridge routines. - * - * Author: Mark A. Greer <mgreer@mvista.com> - * - * 2001-2002 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASMPPC_MV64x60_H -#define __ASMPPC_MV64x60_H - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/slab.h> - -#include <asm/byteorder.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <asm/machdep.h> -#include <asm/pci-bridge.h> -#include <asm/mv64x60_defs.h> - -struct platform_device; - -extern u8 mv64x60_pci_exclude_bridge; - -extern spinlock_t mv64x60_lock; - -/* 32-bit Window table entry defines */ -#define MV64x60_CPU2MEM_0_WIN 0 -#define MV64x60_CPU2MEM_1_WIN 1 -#define MV64x60_CPU2MEM_2_WIN 2 -#define MV64x60_CPU2MEM_3_WIN 3 -#define MV64x60_CPU2DEV_0_WIN 4 -#define MV64x60_CPU2DEV_1_WIN 5 -#define MV64x60_CPU2DEV_2_WIN 6 -#define MV64x60_CPU2DEV_3_WIN 7 -#define MV64x60_CPU2BOOT_WIN 8 -#define MV64x60_CPU2PCI0_IO_WIN 9 -#define MV64x60_CPU2PCI0_MEM_0_WIN 10 -#define MV64x60_CPU2PCI0_MEM_1_WIN 11 -#define MV64x60_CPU2PCI0_MEM_2_WIN 12 -#define MV64x60_CPU2PCI0_MEM_3_WIN 13 -#define MV64x60_CPU2PCI1_IO_WIN 14 -#define MV64x60_CPU2PCI1_MEM_0_WIN 15 -#define MV64x60_CPU2PCI1_MEM_1_WIN 16 -#define MV64x60_CPU2PCI1_MEM_2_WIN 17 -#define MV64x60_CPU2PCI1_MEM_3_WIN 18 -#define MV64x60_CPU2SRAM_WIN 19 -#define MV64x60_CPU2PCI0_IO_REMAP_WIN 20 -#define MV64x60_CPU2PCI1_IO_REMAP_WIN 21 -#define MV64x60_CPU_PROT_0_WIN 22 -#define MV64x60_CPU_PROT_1_WIN 23 -#define MV64x60_CPU_PROT_2_WIN 24 -#define MV64x60_CPU_PROT_3_WIN 25 -#define MV64x60_CPU_SNOOP_0_WIN 26 -#define MV64x60_CPU_SNOOP_1_WIN 27 -#define MV64x60_CPU_SNOOP_2_WIN 28 -#define MV64x60_CPU_SNOOP_3_WIN 29 -#define MV64x60_PCI02MEM_REMAP_0_WIN 30 -#define MV64x60_PCI02MEM_REMAP_1_WIN 31 -#define MV64x60_PCI02MEM_REMAP_2_WIN 32 -#define MV64x60_PCI02MEM_REMAP_3_WIN 33 -#define MV64x60_PCI12MEM_REMAP_0_WIN 34 -#define MV64x60_PCI12MEM_REMAP_1_WIN 35 -#define MV64x60_PCI12MEM_REMAP_2_WIN 36 -#define MV64x60_PCI12MEM_REMAP_3_WIN 37 -#define MV64x60_ENET2MEM_0_WIN 38 -#define MV64x60_ENET2MEM_1_WIN 39 -#define MV64x60_ENET2MEM_2_WIN 40 -#define MV64x60_ENET2MEM_3_WIN 41 -#define MV64x60_ENET2MEM_4_WIN 42 -#define MV64x60_ENET2MEM_5_WIN 43 -#define MV64x60_MPSC2MEM_0_WIN 44 -#define MV64x60_MPSC2MEM_1_WIN 45 -#define MV64x60_MPSC2MEM_2_WIN 46 -#define MV64x60_MPSC2MEM_3_WIN 47 -#define MV64x60_IDMA2MEM_0_WIN 48 -#define MV64x60_IDMA2MEM_1_WIN 49 -#define MV64x60_IDMA2MEM_2_WIN 50 -#define MV64x60_IDMA2MEM_3_WIN 51 -#define MV64x60_IDMA2MEM_4_WIN 52 -#define MV64x60_IDMA2MEM_5_WIN 53 -#define MV64x60_IDMA2MEM_6_WIN 54 -#define MV64x60_IDMA2MEM_7_WIN 55 - -#define MV64x60_32BIT_WIN_COUNT 56 - -/* 64-bit Window table entry defines */ -#define MV64x60_CPU2PCI0_MEM_0_REMAP_WIN 0 -#define MV64x60_CPU2PCI0_MEM_1_REMAP_WIN 1 -#define MV64x60_CPU2PCI0_MEM_2_REMAP_WIN 2 -#define MV64x60_CPU2PCI0_MEM_3_REMAP_WIN 3 -#define MV64x60_CPU2PCI1_MEM_0_REMAP_WIN 4 -#define MV64x60_CPU2PCI1_MEM_1_REMAP_WIN 5 -#define MV64x60_CPU2PCI1_MEM_2_REMAP_WIN 6 -#define MV64x60_CPU2PCI1_MEM_3_REMAP_WIN 7 -#define MV64x60_PCI02MEM_ACC_CNTL_0_WIN 8 -#define MV64x60_PCI02MEM_ACC_CNTL_1_WIN 9 -#define MV64x60_PCI02MEM_ACC_CNTL_2_WIN 10 -#define MV64x60_PCI02MEM_ACC_CNTL_3_WIN 11 -#define MV64x60_PCI12MEM_ACC_CNTL_0_WIN 12 -#define MV64x60_PCI12MEM_ACC_CNTL_1_WIN 13 -#define MV64x60_PCI12MEM_ACC_CNTL_2_WIN 14 -#define MV64x60_PCI12MEM_ACC_CNTL_3_WIN 15 -#define MV64x60_PCI02MEM_SNOOP_0_WIN 16 -#define MV64x60_PCI02MEM_SNOOP_1_WIN 17 -#define MV64x60_PCI02MEM_SNOOP_2_WIN 18 -#define MV64x60_PCI02MEM_SNOOP_3_WIN 19 -#define MV64x60_PCI12MEM_SNOOP_0_WIN 20 -#define MV64x60_PCI12MEM_SNOOP_1_WIN 21 -#define MV64x60_PCI12MEM_SNOOP_2_WIN 22 -#define MV64x60_PCI12MEM_SNOOP_3_WIN 23 - -#define MV64x60_64BIT_WIN_COUNT 24 - -/* - * Define a structure that's used to pass in config information to the - * core routines. - */ -struct mv64x60_pci_window { - u32 cpu_base; - u32 pci_base_hi; - u32 pci_base_lo; - u32 size; - u32 swap; -}; - -struct mv64x60_pci_info { - u8 enable_bus; /* allow access to this PCI bus? */ - - struct mv64x60_pci_window pci_io; - struct mv64x60_pci_window pci_mem[3]; - - u32 acc_cntl_options[MV64x60_CPU2MEM_WINDOWS]; - u32 snoop_options[MV64x60_CPU2MEM_WINDOWS]; - u16 pci_cmd_bits; - u16 latency_timer; -}; - -struct mv64x60_setup_info { - u32 phys_reg_base; - u32 window_preserve_mask_32_hi; - u32 window_preserve_mask_32_lo; - u32 window_preserve_mask_64; - - u32 cpu_prot_options[MV64x60_CPU2MEM_WINDOWS]; - u32 cpu_snoop_options[MV64x60_CPU2MEM_WINDOWS]; - u32 enet_options[MV64x60_CPU2MEM_WINDOWS]; - u32 mpsc_options[MV64x60_CPU2MEM_WINDOWS]; - u32 idma_options[MV64x60_CPU2MEM_WINDOWS]; - - struct mv64x60_pci_info pci_0; - struct mv64x60_pci_info pci_1; -}; - -/* Define what the top bits in the extra member of a window entry means. */ -#define MV64x60_EXTRA_INVALID 0x00000000 -#define MV64x60_EXTRA_CPUWIN_ENAB 0x10000000 -#define MV64x60_EXTRA_CPUPROT_ENAB 0x20000000 -#define MV64x60_EXTRA_ENET_ENAB 0x30000000 -#define MV64x60_EXTRA_MPSC_ENAB 0x40000000 -#define MV64x60_EXTRA_IDMA_ENAB 0x50000000 -#define MV64x60_EXTRA_PCIACC_ENAB 0x60000000 - -#define MV64x60_EXTRA_MASK 0xf0000000 - -/* - * Define the 'handle' struct that will be passed between the 64x60 core - * code and the platform-specific code that will use it. The handle - * will contain pointers to chip-specific routines & information. - */ -struct mv64x60_32bit_window { - u32 base_reg; - u32 size_reg; - u8 base_bits; - u8 size_bits; - u32 (*get_from_field)(u32 val, u32 num_bits); - u32 (*map_to_field)(u32 val, u32 num_bits); - u32 extra; -}; - -struct mv64x60_64bit_window { - u32 base_hi_reg; - u32 base_lo_reg; - u32 size_reg; - u8 base_lo_bits; - u8 size_bits; - u32 (*get_from_field)(u32 val, u32 num_bits); - u32 (*map_to_field)(u32 val, u32 num_bits); - u32 extra; -}; - -typedef struct mv64x60_handle mv64x60_handle_t; -struct mv64x60_chip_info { - u32 (*translate_size)(u32 base, u32 size, u32 num_bits); - u32 (*untranslate_size)(u32 base, u32 size, u32 num_bits); - void (*set_pci2mem_window)(struct pci_controller *hose, u32 bus, - u32 window, u32 base); - void (*set_pci2regs_window)(struct mv64x60_handle *bh, - struct pci_controller *hose, u32 bus, u32 base); - u32 (*is_enabled_32bit)(mv64x60_handle_t *bh, u32 window); - void (*enable_window_32bit)(mv64x60_handle_t *bh, u32 window); - void (*disable_window_32bit)(mv64x60_handle_t *bh, u32 window); - void (*enable_window_64bit)(mv64x60_handle_t *bh, u32 window); - void (*disable_window_64bit)(mv64x60_handle_t *bh, u32 window); - void (*disable_all_windows)(mv64x60_handle_t *bh, - struct mv64x60_setup_info *si); - void (*config_io2mem_windows)(mv64x60_handle_t *bh, - struct mv64x60_setup_info *si, - u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]); - void (*set_mpsc2regs_window)(struct mv64x60_handle *bh, u32 base); - void (*chip_specific_init)(mv64x60_handle_t *bh, - struct mv64x60_setup_info *si); - - struct mv64x60_32bit_window *window_tab_32bit; - struct mv64x60_64bit_window *window_tab_64bit; -}; - -struct mv64x60_handle { - u32 type; /* type of bridge */ - u32 rev; /* revision of bridge */ - void __iomem *v_base;/* virtual base addr of bridge regs */ - phys_addr_t p_base; /* physical base addr of bridge regs */ - - u32 pci_mode_a; /* pci 0 mode: conventional pci, pci-x*/ - u32 pci_mode_b; /* pci 1 mode: conventional pci, pci-x*/ - - u32 io_base_a; /* vaddr of pci 0's I/O space */ - u32 io_base_b; /* vaddr of pci 1's I/O space */ - - struct pci_controller *hose_a; - struct pci_controller *hose_b; - - struct mv64x60_chip_info *ci; /* chip/bridge-specific info */ -}; - - -/* Define I/O routines for accessing registers on the 64x60 bridge. */ -extern inline void -mv64x60_write(struct mv64x60_handle *bh, u32 offset, u32 val) { - ulong flags; - - spin_lock_irqsave(&mv64x60_lock, flags); - out_le32(bh->v_base + offset, val); - spin_unlock_irqrestore(&mv64x60_lock, flags); -} - -extern inline u32 -mv64x60_read(struct mv64x60_handle *bh, u32 offset) { - ulong flags; - u32 reg; - - spin_lock_irqsave(&mv64x60_lock, flags); - reg = in_le32(bh->v_base + offset); - spin_unlock_irqrestore(&mv64x60_lock, flags); - return reg; -} - -extern inline void -mv64x60_modify(struct mv64x60_handle *bh, u32 offs, u32 data, u32 mask) -{ - u32 reg; - ulong flags; - - spin_lock_irqsave(&mv64x60_lock, flags); - reg = in_le32(bh->v_base + offs) & (~mask); - reg |= data & mask; - out_le32(bh->v_base + offs, reg); - spin_unlock_irqrestore(&mv64x60_lock, flags); -} - -#define mv64x60_set_bits(bh, offs, bits) mv64x60_modify(bh, offs, ~0, bits) -#define mv64x60_clr_bits(bh, offs, bits) mv64x60_modify(bh, offs, 0, bits) - -#if defined(CONFIG_SYSFS) && !defined(CONFIG_GT64260) -#define MV64XXX_DEV_NAME "mv64xxx" - -struct mv64xxx_pdata { - u32 hs_reg_valid; -}; -#endif - -/* Externally visible function prototypes */ -int mv64x60_init(struct mv64x60_handle *bh, struct mv64x60_setup_info *si); -u32 mv64x60_get_mem_size(u32 bridge_base, u32 chip_type); -void mv64x60_early_init(struct mv64x60_handle *bh, - struct mv64x60_setup_info *si); -void mv64x60_alloc_hose(struct mv64x60_handle *bh, u32 cfg_addr, - u32 cfg_data, struct pci_controller **hose); -int mv64x60_get_type(struct mv64x60_handle *bh); -int mv64x60_setup_for_chip(struct mv64x60_handle *bh); -void __iomem *mv64x60_get_bridge_vbase(void); -u32 mv64x60_get_bridge_type(void); -u32 mv64x60_get_bridge_rev(void); -void mv64x60_get_mem_windows(struct mv64x60_handle *bh, - u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]); -void mv64x60_config_cpu2mem_windows(struct mv64x60_handle *bh, - struct mv64x60_setup_info *si, - u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]); -void mv64x60_config_cpu2pci_windows(struct mv64x60_handle *bh, - struct mv64x60_pci_info *pi, u32 bus); -void mv64x60_config_pci2mem_windows(struct mv64x60_handle *bh, - struct pci_controller *hose, struct mv64x60_pci_info *pi, u32 bus, - u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]); -void mv64x60_config_resources(struct pci_controller *hose, - struct mv64x60_pci_info *pi, u32 io_base); -void mv64x60_config_pci_params(struct pci_controller *hose, - struct mv64x60_pci_info *pi); -void mv64x60_pd_fixup(struct mv64x60_handle *bh, - struct platform_device *pd_devs[], u32 entries); -void mv64x60_get_32bit_window(struct mv64x60_handle *bh, u32 window, - u32 *base, u32 *size); -void mv64x60_set_32bit_window(struct mv64x60_handle *bh, u32 window, u32 base, - u32 size, u32 other_bits); -void mv64x60_get_64bit_window(struct mv64x60_handle *bh, u32 window, - u32 *base_hi, u32 *base_lo, u32 *size); -void mv64x60_set_64bit_window(struct mv64x60_handle *bh, u32 window, - u32 base_hi, u32 base_lo, u32 size, u32 other_bits); -void mv64x60_set_bus(struct mv64x60_handle *bh, u32 bus, u32 child_bus); -int mv64x60_pci_exclude_device(u8 bus, u8 devfn); - - -void gt64260_init_irq(void); -int gt64260_get_irq(void); -void mv64360_init_irq(void); -int mv64360_get_irq(void); - -u32 mv64x60_mask(u32 val, u32 num_bits); -u32 mv64x60_shift_left(u32 val, u32 num_bits); -u32 mv64x60_shift_right(u32 val, u32 num_bits); -u32 mv64x60_calc_mem_size(struct mv64x60_handle *bh, - u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]); - -void mv64x60_progress_init(u32 base); -void mv64x60_mpsc_progress(char *s, unsigned short hex); - -extern struct mv64x60_32bit_window - gt64260_32bit_windows[MV64x60_32BIT_WIN_COUNT]; -extern struct mv64x60_64bit_window - gt64260_64bit_windows[MV64x60_64BIT_WIN_COUNT]; -extern struct mv64x60_32bit_window - mv64360_32bit_windows[MV64x60_32BIT_WIN_COUNT]; -extern struct mv64x60_64bit_window - mv64360_64bit_windows[MV64x60_64BIT_WIN_COUNT]; - -#endif /* __ASMPPC_MV64x60_H */ diff --git a/include/asm-ppc/mv64x60_defs.h b/include/asm-ppc/mv64x60_defs.h deleted file mode 100644 index 5b0704a3e6ea..000000000000 --- a/include/asm-ppc/mv64x60_defs.h +++ /dev/null @@ -1,976 +0,0 @@ -/* - * include/asm-ppc/mv64x60_defs.h - * - * Register definitions for the Marvell/Galileo GT64260, MV64360, etc. - * host bridges. - * - * Author: Mark A. Greer <mgreer@mvista.com> - * - * 2001-2002 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#ifndef __ASMPPC_MV64x60_DEFS_H -#define __ASMPPC_MV64x60_DEFS_H - -/* - * Define the Marvell bridges that are supported - */ -#define MV64x60_TYPE_INVALID 0 -#define MV64x60_TYPE_GT64260A 1 -#define MV64x60_TYPE_GT64260B 2 -#define MV64x60_TYPE_MV64360 3 -#define MV64x60_TYPE_MV64361 4 -#define MV64x60_TYPE_MV64362 5 -#define MV64x60_TYPE_MV64460 6 - - -/* Revisions of each supported chip */ -#define GT64260_REV_A 0x10 -#define GT64260_REV_B 0x20 -#define MV64360 0x01 -#define MV64460 0x01 - -/* Minimum window size supported by 64260 is 1MB */ -#define GT64260_WINDOW_SIZE_MIN 0x00100000 -#define MV64360_WINDOW_SIZE_MIN 0x00010000 - -#define MV64x60_TCLK_FREQ_MAX 133333333U - -/* IRQ's for embedded controllers */ -#define MV64x60_IRQ_DEV 1 -#define MV64x60_IRQ_CPU_ERR 3 -#define MV64x60_IRQ_TIMER_0_1 8 -#define MV64x60_IRQ_TIMER_2_3 9 -#define MV64x60_IRQ_TIMER_4_5 10 -#define MV64x60_IRQ_TIMER_6_7 11 -#define MV64x60_IRQ_P1_GPP_0_7 24 -#define MV64x60_IRQ_P1_GPP_8_15 25 -#define MV64x60_IRQ_P1_GPP_16_23 26 -#define MV64x60_IRQ_P1_GPP_24_31 27 -#define MV64x60_IRQ_DOORBELL 28 -#define MV64x60_IRQ_ETH_0 32 -#define MV64x60_IRQ_ETH_1 33 -#define MV64x60_IRQ_ETH_2 34 -#define MV64x60_IRQ_SDMA_0 36 -#define MV64x60_IRQ_I2C 37 -#define MV64x60_IRQ_BRG 39 -#define MV64x60_IRQ_MPSC_0 40 -#define MV64x60_IRQ_MPSC_1 42 -#define MV64x60_IRQ_COMM 43 -#define MV64x60_IRQ_P0_GPP_0_7 56 -#define MV64x60_IRQ_P0_GPP_8_15 57 -#define MV64x60_IRQ_P0_GPP_16_23 58 -#define MV64x60_IRQ_P0_GPP_24_31 59 - -#define MV64360_IRQ_PCI0 12 -#define MV64360_IRQ_SRAM_PAR_ERR 13 -#define MV64360_IRQ_PCI1 16 -#define MV64360_IRQ_SDMA_1 38 - -#define MV64x60_IRQ_GPP0 64 -#define MV64x60_IRQ_GPP1 65 -#define MV64x60_IRQ_GPP2 66 -#define MV64x60_IRQ_GPP3 67 -#define MV64x60_IRQ_GPP4 68 -#define MV64x60_IRQ_GPP5 69 -#define MV64x60_IRQ_GPP6 70 -#define MV64x60_IRQ_GPP7 71 -#define MV64x60_IRQ_GPP8 72 -#define MV64x60_IRQ_GPP9 73 -#define MV64x60_IRQ_GPP10 74 -#define MV64x60_IRQ_GPP11 75 -#define MV64x60_IRQ_GPP12 76 -#define MV64x60_IRQ_GPP13 77 -#define MV64x60_IRQ_GPP14 78 -#define MV64x60_IRQ_GPP15 79 -#define MV64x60_IRQ_GPP16 80 -#define MV64x60_IRQ_GPP17 81 -#define MV64x60_IRQ_GPP18 82 -#define MV64x60_IRQ_GPP19 83 -#define MV64x60_IRQ_GPP20 84 -#define MV64x60_IRQ_GPP21 85 -#define MV64x60_IRQ_GPP22 86 -#define MV64x60_IRQ_GPP23 87 -#define MV64x60_IRQ_GPP24 88 -#define MV64x60_IRQ_GPP25 89 -#define MV64x60_IRQ_GPP26 90 -#define MV64x60_IRQ_GPP27 91 -#define MV64x60_IRQ_GPP28 92 -#define MV64x60_IRQ_GPP29 93 -#define MV64x60_IRQ_GPP30 94 -#define MV64x60_IRQ_GPP31 95 - -/* Offsets for register blocks */ -#define GT64260_ENET_PHY_ADDR 0x2000 -#define GT64260_ENET_ESMIR 0x2010 -#define GT64260_ENET_0_OFFSET 0x2400 -#define GT64260_ENET_1_OFFSET 0x2800 -#define GT64260_ENET_2_OFFSET 0x2c00 -#define MV64x60_SDMA_0_OFFSET 0x4000 -#define MV64x60_SDMA_1_OFFSET 0x6000 -#define MV64x60_MPSC_0_OFFSET 0x8000 -#define MV64x60_MPSC_1_OFFSET 0x9000 -#define MV64x60_MPSC_ROUTING_OFFSET 0xb400 -#define MV64x60_SDMA_INTR_OFFSET 0xb800 -#define MV64x60_BRG_0_OFFSET 0xb200 -#define MV64x60_BRG_1_OFFSET 0xb208 - -/* - ***************************************************************************** - * - * CPU Interface Registers - * - ***************************************************************************** - */ - -/* CPU physical address of bridge's registers */ -#define MV64x60_INTERNAL_SPACE_DECODE 0x0068 -#define MV64x60_INTERNAL_SPACE_SIZE 0x10000 -#define MV64x60_INTERNAL_SPACE_DEFAULT_ADDR 0x14000000 - -#define MV64360_CPU_BAR_ENABLE 0x0278 - -/* CPU Memory Controller Window Registers (4 windows) */ -#define MV64x60_CPU2MEM_WINDOWS 4 - -#define MV64x60_CPU2MEM_0_BASE 0x0008 -#define MV64x60_CPU2MEM_0_SIZE 0x0010 -#define MV64x60_CPU2MEM_1_BASE 0x0208 -#define MV64x60_CPU2MEM_1_SIZE 0x0210 -#define MV64x60_CPU2MEM_2_BASE 0x0018 -#define MV64x60_CPU2MEM_2_SIZE 0x0020 -#define MV64x60_CPU2MEM_3_BASE 0x0218 -#define MV64x60_CPU2MEM_3_SIZE 0x0220 - -/* CPU Device Controller Window Registers (4 windows) */ -#define MV64x60_CPU2DEV_WINDOWS 4 - -#define MV64x60_CPU2DEV_0_BASE 0x0028 -#define MV64x60_CPU2DEV_0_SIZE 0x0030 -#define MV64x60_CPU2DEV_1_BASE 0x0228 -#define MV64x60_CPU2DEV_1_SIZE 0x0230 -#define MV64x60_CPU2DEV_2_BASE 0x0248 -#define MV64x60_CPU2DEV_2_SIZE 0x0250 -#define MV64x60_CPU2DEV_3_BASE 0x0038 -#define MV64x60_CPU2DEV_3_SIZE 0x0040 - -#define MV64x60_CPU2BOOT_0_BASE 0x0238 -#define MV64x60_CPU2BOOT_0_SIZE 0x0240 - -#define MV64360_CPU2SRAM_BASE 0x0268 - -/* CPU Windows to PCI space (2 PCI buses each w/ 1 I/O & 4 MEM windows) */ -#define MV64x60_PCI_BUSES 2 -#define MV64x60_PCI_IO_WINDOWS_PER_BUS 1 -#define MV64x60_PCI_MEM_WINDOWS_PER_BUS 4 - -#define MV64x60_CPU2PCI_SWAP_BYTE 0x00000000 -#define MV64x60_CPU2PCI_SWAP_NONE 0x01000000 -#define MV64x60_CPU2PCI_SWAP_BYTE_WORD 0x02000000 -#define MV64x60_CPU2PCI_SWAP_WORD 0x03000000 - -#define MV64x60_CPU2PCI_MEM_REQ64 (1<<27) - -#define MV64x60_CPU2PCI0_IO_BASE 0x0048 -#define MV64x60_CPU2PCI0_IO_SIZE 0x0050 -#define MV64x60_CPU2PCI0_MEM_0_BASE 0x0058 -#define MV64x60_CPU2PCI0_MEM_0_SIZE 0x0060 -#define MV64x60_CPU2PCI0_MEM_1_BASE 0x0080 -#define MV64x60_CPU2PCI0_MEM_1_SIZE 0x0088 -#define MV64x60_CPU2PCI0_MEM_2_BASE 0x0258 -#define MV64x60_CPU2PCI0_MEM_2_SIZE 0x0260 -#define MV64x60_CPU2PCI0_MEM_3_BASE 0x0280 -#define MV64x60_CPU2PCI0_MEM_3_SIZE 0x0288 - -#define MV64x60_CPU2PCI0_IO_REMAP 0x00f0 -#define MV64x60_CPU2PCI0_MEM_0_REMAP_LO 0x00f8 -#define MV64x60_CPU2PCI0_MEM_0_REMAP_HI 0x0320 -#define MV64x60_CPU2PCI0_MEM_1_REMAP_LO 0x0100 -#define MV64x60_CPU2PCI0_MEM_1_REMAP_HI 0x0328 -#define MV64x60_CPU2PCI0_MEM_2_REMAP_LO 0x02f8 -#define MV64x60_CPU2PCI0_MEM_2_REMAP_HI 0x0330 -#define MV64x60_CPU2PCI0_MEM_3_REMAP_LO 0x0300 -#define MV64x60_CPU2PCI0_MEM_3_REMAP_HI 0x0338 - -#define MV64x60_CPU2PCI1_IO_BASE 0x0090 -#define MV64x60_CPU2PCI1_IO_SIZE 0x0098 -#define MV64x60_CPU2PCI1_MEM_0_BASE 0x00a0 -#define MV64x60_CPU2PCI1_MEM_0_SIZE 0x00a8 -#define MV64x60_CPU2PCI1_MEM_1_BASE 0x00b0 -#define MV64x60_CPU2PCI1_MEM_1_SIZE 0x00b8 -#define MV64x60_CPU2PCI1_MEM_2_BASE 0x02a0 -#define MV64x60_CPU2PCI1_MEM_2_SIZE 0x02a8 -#define MV64x60_CPU2PCI1_MEM_3_BASE 0x02b0 -#define MV64x60_CPU2PCI1_MEM_3_SIZE 0x02b8 - -#define MV64x60_CPU2PCI1_IO_REMAP 0x0108 -#define MV64x60_CPU2PCI1_MEM_0_REMAP_LO 0x0110 -#define MV64x60_CPU2PCI1_MEM_0_REMAP_HI 0x0340 -#define MV64x60_CPU2PCI1_MEM_1_REMAP_LO 0x0118 -#define MV64x60_CPU2PCI1_MEM_1_REMAP_HI 0x0348 -#define MV64x60_CPU2PCI1_MEM_2_REMAP_LO 0x0310 -#define MV64x60_CPU2PCI1_MEM_2_REMAP_HI 0x0350 -#define MV64x60_CPU2PCI1_MEM_3_REMAP_LO 0x0318 -#define MV64x60_CPU2PCI1_MEM_3_REMAP_HI 0x0358 - -/* CPU Control Registers */ -#define MV64x60_CPU_CONFIG 0x0000 -#define MV64x60_CPU_MODE 0x0120 -#define MV64x60_CPU_MASTER_CNTL 0x0160 -#define MV64x60_CPU_XBAR_CNTL_LO 0x0150 -#define MV64x60_CPU_XBAR_CNTL_HI 0x0158 -#define MV64x60_CPU_XBAR_TO 0x0168 - -#define GT64260_CPU_RR_XBAR_CNTL_LO 0x0170 -#define GT64260_CPU_RR_XBAR_CNTL_HI 0x0178 - -#define MV64360_CPU_PADS_CALIBRATION 0x03b4 -#define MV64360_CPU_RESET_SAMPLE_LO 0x03c4 -#define MV64360_CPU_RESET_SAMPLE_HI 0x03d4 - -/* SMP Register Map */ -#define MV64360_WHO_AM_I 0x0200 -#define MV64360_CPU0_DOORBELL 0x0214 -#define MV64360_CPU0_DOORBELL_CLR 0x021c -#define MV64360_CPU0_DOORBELL_MASK 0x0234 -#define MV64360_CPU1_DOORBELL 0x0224 -#define MV64360_CPU1_DOORBELL_CLR 0x022c -#define MV64360_CPU1_DOORBELL_MASK 0x023c -#define MV64360_CPUx_DOORBELL(x) (0x0214 + ((x)*0x10)) -#define MV64360_CPUx_DOORBELL_CLR(x) (0x021c + ((x)*0x10)) -#define MV64360_CPUx_DOORBELL_MASK(x) (0x0234 + ((x)*0x08)) -#define MV64360_SEMAPHORE_0 0x0244 -#define MV64360_SEMAPHORE_1 0x024c -#define MV64360_SEMAPHORE_2 0x0254 -#define MV64360_SEMAPHORE_3 0x025c -#define MV64360_SEMAPHORE_4 0x0264 -#define MV64360_SEMAPHORE_5 0x026c -#define MV64360_SEMAPHORE_6 0x0274 -#define MV64360_SEMAPHORE_7 0x027c - -/* CPU Sync Barrier Registers */ -#define GT64260_CPU_SYNC_BARRIER_PCI0 0x00c0 -#define GT64260_CPU_SYNC_BARRIER_PCI1 0x00c8 - -#define MV64360_CPU0_SYNC_BARRIER_TRIG 0x00c0 -#define MV64360_CPU0_SYNC_BARRIER_VIRT 0x00c8 -#define MV64360_CPU1_SYNC_BARRIER_TRIG 0x00d0 -#define MV64360_CPU1_SYNC_BARRIER_VIRT 0x00d8 - -/* CPU Deadlock and Ordering registers (Rev B part only) */ -#define GT64260_CPU_DEADLOCK_ORDERING 0x02d0 -#define GT64260_CPU_WB_PRIORITY_BUFFER_DEPTH 0x02d8 -#define GT64260_CPU_COUNTERS_SYNC_BARRIER_ATTRIBUTE 0x02e0 - -/* CPU Access Protection Registers (gt64260 realy has 8 but don't need) */ -#define MV64x260_CPU_PROT_WINDOWS 4 - -#define GT64260_CPU_PROT_ACCPROTECT (1<<16) -#define GT64260_CPU_PROT_WRPROTECT (1<<17) -#define GT64260_CPU_PROT_CACHEPROTECT (1<<18) - -#define MV64360_CPU_PROT_ACCPROTECT (1<<20) -#define MV64360_CPU_PROT_WRPROTECT (1<<21) -#define MV64360_CPU_PROT_CACHEPROTECT (1<<22) -#define MV64360_CPU_PROT_WIN_ENABLE (1<<31) - -#define MV64x60_CPU_PROT_BASE_0 0x0180 -#define MV64x60_CPU_PROT_SIZE_0 0x0188 -#define MV64x60_CPU_PROT_BASE_1 0x0190 -#define MV64x60_CPU_PROT_SIZE_1 0x0198 -#define MV64x60_CPU_PROT_BASE_2 0x01a0 -#define MV64x60_CPU_PROT_SIZE_2 0x01a8 -#define MV64x60_CPU_PROT_BASE_3 0x01b0 -#define MV64x60_CPU_PROT_SIZE_3 0x01b8 - -#define GT64260_CPU_PROT_BASE_4 0x01c0 -#define GT64260_CPU_PROT_SIZE_4 0x01c8 -#define GT64260_CPU_PROT_BASE_5 0x01d0 -#define GT64260_CPU_PROT_SIZE_5 0x01d8 -#define GT64260_CPU_PROT_BASE_6 0x01e0 -#define GT64260_CPU_PROT_SIZE_6 0x01e8 -#define GT64260_CPU_PROT_BASE_7 0x01f0 -#define GT64260_CPU_PROT_SIZE_7 0x01f8 - -/* CPU Snoop Control Registers (64260 only) */ -#define GT64260_CPU_SNOOP_WINDOWS 4 - -#define GT64260_CPU_SNOOP_NONE 0x00000000 -#define GT64260_CPU_SNOOP_WT 0x00010000 -#define GT64260_CPU_SNOOP_WB 0x00020000 -#define GT64260_CPU_SNOOP_MASK 0x00030000 -#define GT64260_CPU_SNOOP_ALL_BITS GT64260_CPU_SNOOP_MASK - -#define GT64260_CPU_SNOOP_BASE_0 0x0380 -#define GT64260_CPU_SNOOP_SIZE_0 0x0388 -#define GT64260_CPU_SNOOP_BASE_1 0x0390 -#define GT64260_CPU_SNOOP_SIZE_1 0x0398 -#define GT64260_CPU_SNOOP_BASE_2 0x03a0 -#define GT64260_CPU_SNOOP_SIZE_2 0x03a8 -#define GT64260_CPU_SNOOP_BASE_3 0x03b0 -#define GT64260_CPU_SNOOP_SIZE_3 0x03b8 - -/* CPU Snoop Control Registers (64360 only) */ -#define MV64360_CPU_SNOOP_WINDOWS 4 -#define MV64360_CPU_SNOOP_NONE 0x00000000 -#define MV64360_CPU_SNOOP_WT 0x00010000 -#define MV64360_CPU_SNOOP_WB 0x00020000 -#define MV64360_CPU_SNOOP_MASK 0x00030000 -#define MV64360_CPU_SNOOP_ALL_BITS MV64360_CPU_SNOOP_MASK - - -/* CPU Error Report Registers */ -#define MV64x60_CPU_ERR_ADDR_LO 0x0070 -#define MV64x60_CPU_ERR_ADDR_HI 0x0078 -#define MV64x60_CPU_ERR_DATA_LO 0x0128 -#define MV64x60_CPU_ERR_DATA_HI 0x0130 -#define MV64x60_CPU_ERR_PARITY 0x0138 -#define MV64x60_CPU_ERR_CAUSE 0x0140 -#define MV64x60_CPU_ERR_MASK 0x0148 - -/* - ***************************************************************************** - * - * SRAM Controller Registers - * - ***************************************************************************** - */ - -#define MV64360_SRAM_CONFIG 0x0380 -#define MV64360_SRAM_TEST_MODE 0x03f4 -#define MV64360_SRAM_ERR_CAUSE 0x0388 -#define MV64360_SRAM_ERR_ADDR_LO 0x0390 -#define MV64360_SRAM_ERR_ADDR_HI 0x03f8 -#define MV64360_SRAM_ERR_DATA_LO 0x0398 -#define MV64360_SRAM_ERR_DATA_HI 0x03a0 -#define MV64360_SRAM_ERR_PARITY 0x03a8 - -#define MV64360_SRAM_SIZE 0x00040000 /* 2Mb/256KB SRAM */ - -/* - ***************************************************************************** - * - * SDRAM/MEM Controller Registers - * - ***************************************************************************** - */ - -/* SDRAM Config Registers (64260) */ -#define GT64260_SDRAM_CONFIG 0x0448 - -/* SDRAM Error Report Registers (64260) */ -#define GT64260_SDRAM_ERR_DATA_LO 0x0484 -#define GT64260_SDRAM_ERR_DATA_HI 0x0480 -#define GT64260_SDRAM_ERR_ADDR 0x0490 -#define GT64260_SDRAM_ERR_ECC_RCVD 0x0488 -#define GT64260_SDRAM_ERR_ECC_CALC 0x048c -#define GT64260_SDRAM_ERR_ECC_CNTL 0x0494 -#define GT64260_SDRAM_ERR_ECC_ERR_CNT 0x0498 - -/* SDRAM Config Registers (64360) */ -#define MV64360_SDRAM_CONFIG 0x1400 - -/* SDRAM Control Registers */ -#define MV64360_D_UNIT_CONTROL_LOW 0x1404 -#define MV64360_D_UNIT_CONTROL_HIGH 0x1424 -#define MV64460_D_UNIT_MMASK 0x14b0 - -/* SDRAM Error Report Registers (64360) */ -#define MV64360_SDRAM_ERR_DATA_LO 0x1444 -#define MV64360_SDRAM_ERR_DATA_HI 0x1440 -#define MV64360_SDRAM_ERR_ADDR 0x1450 -#define MV64360_SDRAM_ERR_ECC_RCVD 0x1448 -#define MV64360_SDRAM_ERR_ECC_CALC 0x144c -#define MV64360_SDRAM_ERR_ECC_CNTL 0x1454 -#define MV64360_SDRAM_ERR_ECC_ERR_CNT 0x1458 - -/* - ***************************************************************************** - * - * Device/BOOT Controller Registers - * - ***************************************************************************** - */ - -/* Device Control Registers */ -#define MV64x60_DEV_BANK_PARAMS_0 0x045c -#define MV64x60_DEV_BANK_PARAMS_1 0x0460 -#define MV64x60_DEV_BANK_PARAMS_2 0x0464 -#define MV64x60_DEV_BANK_PARAMS_3 0x0468 -#define MV64x60_DEV_BOOT_PARAMS 0x046c -#define MV64x60_DEV_IF_CNTL 0x04c0 -#define MV64x60_DEV_IF_XBAR_CNTL_LO 0x04c8 -#define MV64x60_DEV_IF_XBAR_CNTL_HI 0x04cc -#define MV64x60_DEV_IF_XBAR_CNTL_TO 0x04c4 - -/* Device Interrupt Registers */ -#define MV64x60_DEV_INTR_CAUSE 0x04d0 -#define MV64x60_DEV_INTR_MASK 0x04d4 -#define MV64x60_DEV_INTR_ERR_ADDR 0x04d8 - -#define MV64360_DEV_INTR_ERR_DATA 0x04dc -#define MV64360_DEV_INTR_ERR_PAR 0x04e0 - -/* - ***************************************************************************** - * - * PCI Bridge Interface Registers - * - ***************************************************************************** - */ - -/* PCI Configuration Access Registers */ -#define MV64x60_PCI0_CONFIG_ADDR 0x0cf8 -#define MV64x60_PCI0_CONFIG_DATA 0x0cfc -#define MV64x60_PCI0_IACK 0x0c34 - -#define MV64x60_PCI1_CONFIG_ADDR 0x0c78 -#define MV64x60_PCI1_CONFIG_DATA 0x0c7c -#define MV64x60_PCI1_IACK 0x0cb4 - -/* PCI Control Registers */ -#define MV64x60_PCI0_CMD 0x0c00 -#define MV64x60_PCI0_MODE 0x0d00 -#define MV64x60_PCI0_TO_RETRY 0x0c04 -#define MV64x60_PCI0_RD_BUF_DISCARD_TIMER 0x0d04 -#define MV64x60_PCI0_MSI_TRIGGER_TIMER 0x0c38 -#define MV64x60_PCI0_ARBITER_CNTL 0x1d00 -#define MV64x60_PCI0_XBAR_CNTL_LO 0x1d08 -#define MV64x60_PCI0_XBAR_CNTL_HI 0x1d0c -#define MV64x60_PCI0_XBAR_CNTL_TO 0x1d04 -#define MV64x60_PCI0_RD_RESP_XBAR_CNTL_LO 0x1d18 -#define MV64x60_PCI0_RD_RESP_XBAR_CNTL_HI 0x1d1c -#define MV64x60_PCI0_SYNC_BARRIER 0x1d10 -#define MV64x60_PCI0_P2P_CONFIG 0x1d14 -#define MV64x60_PCI0_INTR_MASK - -#define GT64260_PCI0_P2P_SWAP_CNTL 0x1d54 - -#define MV64x60_PCI1_CMD 0x0c80 -#define MV64x60_PCI1_MODE 0x0d80 -#define MV64x60_PCI1_TO_RETRY 0x0c84 -#define MV64x60_PCI1_RD_BUF_DISCARD_TIMER 0x0d84 -#define MV64x60_PCI1_MSI_TRIGGER_TIMER 0x0cb8 -#define MV64x60_PCI1_ARBITER_CNTL 0x1d80 -#define MV64x60_PCI1_XBAR_CNTL_LO 0x1d88 -#define MV64x60_PCI1_XBAR_CNTL_HI 0x1d8c -#define MV64x60_PCI1_XBAR_CNTL_TO 0x1d84 -#define MV64x60_PCI1_RD_RESP_XBAR_CNTL_LO 0x1d98 -#define MV64x60_PCI1_RD_RESP_XBAR_CNTL_HI 0x1d9c -#define MV64x60_PCI1_SYNC_BARRIER 0x1d90 -#define MV64x60_PCI1_P2P_CONFIG 0x1d94 - -#define GT64260_PCI1_P2P_SWAP_CNTL 0x1dd4 - -/* Different modes that the pci hoses can be in (bits 5:4 in PCI Mode reg) */ -#define MV64x60_PCIMODE_CONVENTIONAL 0 -#define MV64x60_PCIMODE_PCIX_66 (1 << 4) -#define MV64x60_PCIMODE_PCIX_100 (2 << 4) -#define MV64x60_PCIMODE_PCIX_133 (3 << 4) -#define MV64x60_PCIMODE_MASK (0x3 << 4) - -/* PCI Access Control Regions Registers */ -#define GT64260_PCI_ACC_CNTL_PREFETCHEN (1<<12) -#define GT64260_PCI_ACC_CNTL_DREADEN (1<<13) -#define GT64260_PCI_ACC_CNTL_RDPREFETCH (1<<16) -#define GT64260_PCI_ACC_CNTL_RDLINEPREFETCH (1<<17) -#define GT64260_PCI_ACC_CNTL_RDMULPREFETCH (1<<18) -#define GT64260_PCI_ACC_CNTL_MBURST_32_BTYES 0x00000000 -#define GT64260_PCI_ACC_CNTL_MBURST_64_BYTES 0x00100000 -#define GT64260_PCI_ACC_CNTL_MBURST_128_BYTES 0x00200000 -#define GT64260_PCI_ACC_CNTL_MBURST_MASK 0x00300000 -#define GT64260_PCI_ACC_CNTL_SWAP_BYTE 0x00000000 -#define GT64260_PCI_ACC_CNTL_SWAP_NONE 0x01000000 -#define GT64260_PCI_ACC_CNTL_SWAP_BYTE_WORD 0x02000000 -#define GT64260_PCI_ACC_CNTL_SWAP_WORD 0x03000000 -#define GT64260_PCI_ACC_CNTL_SWAP_MASK 0x03000000 -#define GT64260_PCI_ACC_CNTL_ACCPROT (1<<28) -#define GT64260_PCI_ACC_CNTL_WRPROT (1<<29) - -#define GT64260_PCI_ACC_CNTL_ALL_BITS (GT64260_PCI_ACC_CNTL_PREFETCHEN | \ - GT64260_PCI_ACC_CNTL_DREADEN | \ - GT64260_PCI_ACC_CNTL_RDPREFETCH | \ - GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |\ - GT64260_PCI_ACC_CNTL_RDMULPREFETCH | \ - GT64260_PCI_ACC_CNTL_MBURST_MASK | \ - GT64260_PCI_ACC_CNTL_SWAP_MASK | \ - GT64260_PCI_ACC_CNTL_ACCPROT| \ - GT64260_PCI_ACC_CNTL_WRPROT) - -#define MV64360_PCI_ACC_CNTL_ENABLE (1<<0) -#define MV64360_PCI_ACC_CNTL_REQ64 (1<<1) -#define MV64360_PCI_ACC_CNTL_SNOOP_NONE 0x00000000 -#define MV64360_PCI_ACC_CNTL_SNOOP_WT 0x00000004 -#define MV64360_PCI_ACC_CNTL_SNOOP_WB 0x00000008 -#define MV64360_PCI_ACC_CNTL_SNOOP_MASK 0x0000000c -#define MV64360_PCI_ACC_CNTL_ACCPROT (1<<4) -#define MV64360_PCI_ACC_CNTL_WRPROT (1<<5) -#define MV64360_PCI_ACC_CNTL_SWAP_BYTE 0x00000000 -#define MV64360_PCI_ACC_CNTL_SWAP_NONE 0x00000040 -#define MV64360_PCI_ACC_CNTL_SWAP_BYTE_WORD 0x00000080 -#define MV64360_PCI_ACC_CNTL_SWAP_WORD 0x000000c0 -#define MV64360_PCI_ACC_CNTL_SWAP_MASK 0x000000c0 -#define MV64360_PCI_ACC_CNTL_MBURST_32_BYTES 0x00000000 -#define MV64360_PCI_ACC_CNTL_MBURST_64_BYTES 0x00000100 -#define MV64360_PCI_ACC_CNTL_MBURST_128_BYTES 0x00000200 -#define MV64360_PCI_ACC_CNTL_MBURST_MASK 0x00000300 -#define MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES 0x00000000 -#define MV64360_PCI_ACC_CNTL_RDSIZE_64_BYTES 0x00000400 -#define MV64360_PCI_ACC_CNTL_RDSIZE_128_BYTES 0x00000800 -#define MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES 0x00000c00 -#define MV64360_PCI_ACC_CNTL_RDSIZE_MASK 0x00000c00 - -#define MV64360_PCI_ACC_CNTL_ALL_BITS (MV64360_PCI_ACC_CNTL_ENABLE | \ - MV64360_PCI_ACC_CNTL_REQ64 | \ - MV64360_PCI_ACC_CNTL_SNOOP_MASK | \ - MV64360_PCI_ACC_CNTL_ACCPROT | \ - MV64360_PCI_ACC_CNTL_WRPROT | \ - MV64360_PCI_ACC_CNTL_SWAP_MASK | \ - MV64360_PCI_ACC_CNTL_MBURST_MASK | \ - MV64360_PCI_ACC_CNTL_RDSIZE_MASK) - -#define MV64x60_PCI0_ACC_CNTL_0_BASE_LO 0x1e00 -#define MV64x60_PCI0_ACC_CNTL_0_BASE_HI 0x1e04 -#define MV64x60_PCI0_ACC_CNTL_0_SIZE 0x1e08 -#define MV64x60_PCI0_ACC_CNTL_1_BASE_LO 0x1e10 -#define MV64x60_PCI0_ACC_CNTL_1_BASE_HI 0x1e14 -#define MV64x60_PCI0_ACC_CNTL_1_SIZE 0x1e18 -#define MV64x60_PCI0_ACC_CNTL_2_BASE_LO 0x1e20 -#define MV64x60_PCI0_ACC_CNTL_2_BASE_HI 0x1e24 -#define MV64x60_PCI0_ACC_CNTL_2_SIZE 0x1e28 -#define MV64x60_PCI0_ACC_CNTL_3_BASE_LO 0x1e30 -#define MV64x60_PCI0_ACC_CNTL_3_BASE_HI 0x1e34 -#define MV64x60_PCI0_ACC_CNTL_3_SIZE 0x1e38 -#define MV64x60_PCI0_ACC_CNTL_4_BASE_LO 0x1e40 -#define MV64x60_PCI0_ACC_CNTL_4_BASE_HI 0x1e44 -#define MV64x60_PCI0_ACC_CNTL_4_SIZE 0x1e48 -#define MV64x60_PCI0_ACC_CNTL_5_BASE_LO 0x1e50 -#define MV64x60_PCI0_ACC_CNTL_5_BASE_HI 0x1e54 -#define MV64x60_PCI0_ACC_CNTL_5_SIZE 0x1e58 - -#define GT64260_PCI0_ACC_CNTL_6_BASE_LO 0x1e60 -#define GT64260_PCI0_ACC_CNTL_6_BASE_HI 0x1e64 -#define GT64260_PCI0_ACC_CNTL_6_SIZE 0x1e68 -#define GT64260_PCI0_ACC_CNTL_7_BASE_LO 0x1e70 -#define GT64260_PCI0_ACC_CNTL_7_BASE_HI 0x1e74 -#define GT64260_PCI0_ACC_CNTL_7_SIZE 0x1e78 - -#define MV64x60_PCI1_ACC_CNTL_0_BASE_LO 0x1e80 -#define MV64x60_PCI1_ACC_CNTL_0_BASE_HI 0x1e84 -#define MV64x60_PCI1_ACC_CNTL_0_SIZE 0x1e88 -#define MV64x60_PCI1_ACC_CNTL_1_BASE_LO 0x1e90 -#define MV64x60_PCI1_ACC_CNTL_1_BASE_HI 0x1e94 -#define MV64x60_PCI1_ACC_CNTL_1_SIZE 0x1e98 -#define MV64x60_PCI1_ACC_CNTL_2_BASE_LO 0x1ea0 -#define MV64x60_PCI1_ACC_CNTL_2_BASE_HI 0x1ea4 -#define MV64x60_PCI1_ACC_CNTL_2_SIZE 0x1ea8 -#define MV64x60_PCI1_ACC_CNTL_3_BASE_LO 0x1eb0 -#define MV64x60_PCI1_ACC_CNTL_3_BASE_HI 0x1eb4 -#define MV64x60_PCI1_ACC_CNTL_3_SIZE 0x1eb8 -#define MV64x60_PCI1_ACC_CNTL_4_BASE_LO 0x1ec0 -#define MV64x60_PCI1_ACC_CNTL_4_BASE_HI 0x1ec4 -#define MV64x60_PCI1_ACC_CNTL_4_SIZE 0x1ec8 -#define MV64x60_PCI1_ACC_CNTL_5_BASE_LO 0x1ed0 -#define MV64x60_PCI1_ACC_CNTL_5_BASE_HI 0x1ed4 -#define MV64x60_PCI1_ACC_CNTL_5_SIZE 0x1ed8 - -#define GT64260_PCI1_ACC_CNTL_6_BASE_LO 0x1ee0 -#define GT64260_PCI1_ACC_CNTL_6_BASE_HI 0x1ee4 -#define GT64260_PCI1_ACC_CNTL_6_SIZE 0x1ee8 -#define GT64260_PCI1_ACC_CNTL_7_BASE_LO 0x1ef0 -#define GT64260_PCI1_ACC_CNTL_7_BASE_HI 0x1ef4 -#define GT64260_PCI1_ACC_CNTL_7_SIZE 0x1ef8 - -/* PCI Snoop Control Registers (64260 only) */ -#define GT64260_PCI_SNOOP_NONE 0x00000000 -#define GT64260_PCI_SNOOP_WT 0x00001000 -#define GT64260_PCI_SNOOP_WB 0x00002000 - -#define GT64260_PCI0_SNOOP_0_BASE_LO 0x1f00 -#define GT64260_PCI0_SNOOP_0_BASE_HI 0x1f04 -#define GT64260_PCI0_SNOOP_0_SIZE 0x1f08 -#define GT64260_PCI0_SNOOP_1_BASE_LO 0x1f10 -#define GT64260_PCI0_SNOOP_1_BASE_HI 0x1f14 -#define GT64260_PCI0_SNOOP_1_SIZE 0x1f18 -#define GT64260_PCI0_SNOOP_2_BASE_LO 0x1f20 -#define GT64260_PCI0_SNOOP_2_BASE_HI 0x1f24 -#define GT64260_PCI0_SNOOP_2_SIZE 0x1f28 -#define GT64260_PCI0_SNOOP_3_BASE_LO 0x1f30 -#define GT64260_PCI0_SNOOP_3_BASE_HI 0x1f34 -#define GT64260_PCI0_SNOOP_3_SIZE 0x1f38 - -#define GT64260_PCI1_SNOOP_0_BASE_LO 0x1f80 -#define GT64260_PCI1_SNOOP_0_BASE_HI 0x1f84 -#define GT64260_PCI1_SNOOP_0_SIZE 0x1f88 -#define GT64260_PCI1_SNOOP_1_BASE_LO 0x1f90 -#define GT64260_PCI1_SNOOP_1_BASE_HI 0x1f94 -#define GT64260_PCI1_SNOOP_1_SIZE 0x1f98 -#define GT64260_PCI1_SNOOP_2_BASE_LO 0x1fa0 -#define GT64260_PCI1_SNOOP_2_BASE_HI 0x1fa4 -#define GT64260_PCI1_SNOOP_2_SIZE 0x1fa8 -#define GT64260_PCI1_SNOOP_3_BASE_LO 0x1fb0 -#define GT64260_PCI1_SNOOP_3_BASE_HI 0x1fb4 -#define GT64260_PCI1_SNOOP_3_SIZE 0x1fb8 - -/* PCI Error Report Registers */ -#define MV64x60_PCI0_ERR_SERR_MASK 0x0c28 -#define MV64x60_PCI0_ERR_ADDR_LO 0x1d40 -#define MV64x60_PCI0_ERR_ADDR_HI 0x1d44 -#define MV64x60_PCI0_ERR_DATA_LO 0x1d48 -#define MV64x60_PCI0_ERR_DATA_HI 0x1d4c -#define MV64x60_PCI0_ERR_CMD 0x1d50 -#define MV64x60_PCI0_ERR_CAUSE 0x1d58 -#define MV64x60_PCI0_ERR_MASK 0x1d5c - -#define MV64x60_PCI1_ERR_SERR_MASK 0x0ca8 -#define MV64x60_PCI1_ERR_ADDR_LO 0x1dc0 -#define MV64x60_PCI1_ERR_ADDR_HI 0x1dc4 -#define MV64x60_PCI1_ERR_DATA_LO 0x1dc8 -#define MV64x60_PCI1_ERR_DATA_HI 0x1dcc -#define MV64x60_PCI1_ERR_CMD 0x1dd0 -#define MV64x60_PCI1_ERR_CAUSE 0x1dd8 -#define MV64x60_PCI1_ERR_MASK 0x1ddc - -/* PCI Slave Address Decoding Registers */ -#define MV64x60_PCI0_MEM_0_SIZE 0x0c08 -#define MV64x60_PCI0_MEM_1_SIZE 0x0d08 -#define MV64x60_PCI0_MEM_2_SIZE 0x0c0c -#define MV64x60_PCI0_MEM_3_SIZE 0x0d0c -#define MV64x60_PCI1_MEM_0_SIZE 0x0c88 -#define MV64x60_PCI1_MEM_1_SIZE 0x0d88 -#define MV64x60_PCI1_MEM_2_SIZE 0x0c8c -#define MV64x60_PCI1_MEM_3_SIZE 0x0d8c - -#define MV64x60_PCI0_BAR_ENABLE 0x0c3c -#define MV64x60_PCI1_BAR_ENABLE 0x0cbc - -#define MV64x60_PCI0_PCI_DECODE_CNTL 0x0d3c -#define MV64x60_PCI1_PCI_DECODE_CNTL 0x0dbc - -#define MV64x60_PCI0_SLAVE_MEM_0_REMAP 0x0c48 -#define MV64x60_PCI0_SLAVE_MEM_1_REMAP 0x0d48 -#define MV64x60_PCI0_SLAVE_MEM_2_REMAP 0x0c4c -#define MV64x60_PCI0_SLAVE_MEM_3_REMAP 0x0d4c -#define MV64x60_PCI0_SLAVE_DEV_0_REMAP 0x0c50 -#define MV64x60_PCI0_SLAVE_DEV_1_REMAP 0x0d50 -#define MV64x60_PCI0_SLAVE_DEV_2_REMAP 0x0d58 -#define MV64x60_PCI0_SLAVE_DEV_3_REMAP 0x0c54 -#define MV64x60_PCI0_SLAVE_BOOT_REMAP 0x0d54 -#define MV64x60_PCI0_SLAVE_P2P_MEM_0_REMAP_LO 0x0d5c -#define MV64x60_PCI0_SLAVE_P2P_MEM_0_REMAP_HI 0x0d60 -#define MV64x60_PCI0_SLAVE_P2P_MEM_1_REMAP_LO 0x0d64 -#define MV64x60_PCI0_SLAVE_P2P_MEM_1_REMAP_HI 0x0d68 -#define MV64x60_PCI0_SLAVE_P2P_IO_REMAP 0x0d6c -#define MV64x60_PCI0_SLAVE_CPU_REMAP 0x0d70 - -#define MV64x60_PCI1_SLAVE_MEM_0_REMAP 0x0cc8 -#define MV64x60_PCI1_SLAVE_MEM_1_REMAP 0x0dc8 -#define MV64x60_PCI1_SLAVE_MEM_2_REMAP 0x0ccc -#define MV64x60_PCI1_SLAVE_MEM_3_REMAP 0x0dcc -#define MV64x60_PCI1_SLAVE_DEV_0_REMAP 0x0cd0 -#define MV64x60_PCI1_SLAVE_DEV_1_REMAP 0x0dd0 -#define MV64x60_PCI1_SLAVE_DEV_2_REMAP 0x0dd8 -#define MV64x60_PCI1_SLAVE_DEV_3_REMAP 0x0cd4 -#define MV64x60_PCI1_SLAVE_BOOT_REMAP 0x0dd4 -#define MV64x60_PCI1_SLAVE_P2P_MEM_0_REMAP_LO 0x0ddc -#define MV64x60_PCI1_SLAVE_P2P_MEM_0_REMAP_HI 0x0de0 -#define MV64x60_PCI1_SLAVE_P2P_MEM_1_REMAP_LO 0x0de4 -#define MV64x60_PCI1_SLAVE_P2P_MEM_1_REMAP_HI 0x0de8 -#define MV64x60_PCI1_SLAVE_P2P_IO_REMAP 0x0dec -#define MV64x60_PCI1_SLAVE_CPU_REMAP 0x0df0 - -#define MV64360_PCICFG_CPCI_HOTSWAP 0x68 - -/* - ***************************************************************************** - * - * ENET Controller Interface Registers - * - ***************************************************************************** - */ - -/* ENET Controller Window Registers (6 windows) */ -#define MV64360_ENET2MEM_WINDOWS 6 - -#define MV64360_ENET2MEM_0_BASE 0x2200 -#define MV64360_ENET2MEM_0_SIZE 0x2204 -#define MV64360_ENET2MEM_1_BASE 0x2208 -#define MV64360_ENET2MEM_1_SIZE 0x220c -#define MV64360_ENET2MEM_2_BASE 0x2210 -#define MV64360_ENET2MEM_2_SIZE 0x2214 -#define MV64360_ENET2MEM_3_BASE 0x2218 -#define MV64360_ENET2MEM_3_SIZE 0x221c -#define MV64360_ENET2MEM_4_BASE 0x2220 -#define MV64360_ENET2MEM_4_SIZE 0x2224 -#define MV64360_ENET2MEM_5_BASE 0x2228 -#define MV64360_ENET2MEM_5_SIZE 0x222c - -#define MV64360_ENET2MEM_SNOOP_NONE 0x00000000 -#define MV64360_ENET2MEM_SNOOP_WT 0x00001000 -#define MV64360_ENET2MEM_SNOOP_WB 0x00002000 - -#define MV64360_ENET2MEM_BAR_ENABLE 0x2290 - -#define MV64360_ENET2MEM_ACC_PROT_0 0x2294 -#define MV64360_ENET2MEM_ACC_PROT_1 0x2298 -#define MV64360_ENET2MEM_ACC_PROT_2 0x229c - -/* - ***************************************************************************** - * - * MPSC Controller Interface Registers - * - ***************************************************************************** - */ - -/* MPSC Controller Window Registers (4 windows) */ -#define MV64360_MPSC2MEM_WINDOWS 4 - -#define MV64360_MPSC2MEM_0_BASE 0xf200 -#define MV64360_MPSC2MEM_0_SIZE 0xf204 -#define MV64360_MPSC2MEM_1_BASE 0xf208 -#define MV64360_MPSC2MEM_1_SIZE 0xf20c -#define MV64360_MPSC2MEM_2_BASE 0xf210 -#define MV64360_MPSC2MEM_2_SIZE 0xf214 -#define MV64360_MPSC2MEM_3_BASE 0xf218 -#define MV64360_MPSC2MEM_3_SIZE 0xf21c - -#define MV64360_MPSC_0_REMAP 0xf240 -#define MV64360_MPSC_1_REMAP 0xf244 - -#define MV64360_MPSC2MEM_SNOOP_NONE 0x00000000 -#define MV64360_MPSC2MEM_SNOOP_WT 0x00001000 -#define MV64360_MPSC2MEM_SNOOP_WB 0x00002000 - -#define MV64360_MPSC2MEM_BAR_ENABLE 0xf250 - -#define MV64360_MPSC2MEM_ACC_PROT_0 0xf254 -#define MV64360_MPSC2MEM_ACC_PROT_1 0xf258 - -#define MV64360_MPSC2REGS_BASE 0xf25c - -/* - ***************************************************************************** - * - * Timer/Counter Interface Registers - * - ***************************************************************************** - */ - -#define MV64x60_TIMR_CNTR_0 0x0850 -#define MV64x60_TIMR_CNTR_1 0x0854 -#define MV64x60_TIMR_CNTR_2 0x0858 -#define MV64x60_TIMR_CNTR_3 0x085c -#define MV64x60_TIMR_CNTR_0_3_CNTL 0x0864 -#define MV64x60_TIMR_CNTR_0_3_INTR_CAUSE 0x0868 -#define MV64x60_TIMR_CNTR_0_3_INTR_MASK 0x086c - -#define GT64260_TIMR_CNTR_4 0x0950 -#define GT64260_TIMR_CNTR_5 0x0954 -#define GT64260_TIMR_CNTR_6 0x0958 -#define GT64260_TIMR_CNTR_7 0x095c -#define GT64260_TIMR_CNTR_4_7_CNTL 0x0964 -#define GT64260_TIMR_CNTR_4_7_INTR_CAUSE 0x0968 -#define GT64260_TIMR_CNTR_4_7_INTR_MASK 0x096c - -/* - ***************************************************************************** - * - * Communications Controller - * - ***************************************************************************** - */ - -#define GT64260_SER_INIT_PCI_ADDR_HI 0xf320 -#define GT64260_SER_INIT_LAST_DATA 0xf324 -#define GT64260_SER_INIT_CONTROL 0xf328 -#define GT64260_SER_INIT_STATUS 0xf32c - -#define MV64x60_COMM_ARBITER_CNTL 0xf300 -#define MV64x60_COMM_CONFIG 0xb40c -#define MV64x60_COMM_XBAR_TO 0xf304 -#define MV64x60_COMM_INTR_CAUSE 0xf310 -#define MV64x60_COMM_INTR_MASK 0xf314 -#define MV64x60_COMM_ERR_ADDR 0xf318 - -#define MV64360_COMM_ARBITER_CNTL 0xf300 - -/* - ***************************************************************************** - * - * IDMA Controller Interface Registers - * - ***************************************************************************** - */ - -/* IDMA Controller Window Registers (8 windows) */ -#define MV64360_IDMA2MEM_WINDOWS 8 - -#define MV64360_IDMA2MEM_0_BASE 0x0a00 -#define MV64360_IDMA2MEM_0_SIZE 0x0a04 -#define MV64360_IDMA2MEM_1_BASE 0x0a08 -#define MV64360_IDMA2MEM_1_SIZE 0x0a0c -#define MV64360_IDMA2MEM_2_BASE 0x0a10 -#define MV64360_IDMA2MEM_2_SIZE 0x0a14 -#define MV64360_IDMA2MEM_3_BASE 0x0a18 -#define MV64360_IDMA2MEM_3_SIZE 0x0a1c -#define MV64360_IDMA2MEM_4_BASE 0x0a20 -#define MV64360_IDMA2MEM_4_SIZE 0x0a24 -#define MV64360_IDMA2MEM_5_BASE 0x0a28 -#define MV64360_IDMA2MEM_5_SIZE 0x0a2c -#define MV64360_IDMA2MEM_6_BASE 0x0a30 -#define MV64360_IDMA2MEM_6_SIZE 0x0a34 -#define MV64360_IDMA2MEM_7_BASE 0x0a38 -#define MV64360_IDMA2MEM_7_SIZE 0x0a3c - -#define MV64360_IDMA2MEM_SNOOP_NONE 0x00000000 -#define MV64360_IDMA2MEM_SNOOP_WT 0x00001000 -#define MV64360_IDMA2MEM_SNOOP_WB 0x00002000 - -#define MV64360_IDMA2MEM_BAR_ENABLE 0x0a80 - -#define MV64360_IDMA2MEM_ACC_PROT_0 0x0a70 -#define MV64360_IDMA2MEM_ACC_PROT_1 0x0a74 -#define MV64360_IDMA2MEM_ACC_PROT_2 0x0a78 -#define MV64360_IDMA2MEM_ACC_PROT_3 0x0a7c - -#define MV64x60_IDMA_0_OFFSET 0x0800 -#define MV64x60_IDMA_1_OFFSET 0x0804 -#define MV64x60_IDMA_2_OFFSET 0x0808 -#define MV64x60_IDMA_3_OFFSET 0x080c -#define MV64x60_IDMA_4_OFFSET 0x0900 -#define MV64x60_IDMA_5_OFFSET 0x0904 -#define MV64x60_IDMA_6_OFFSET 0x0908 -#define MV64x60_IDMA_7_OFFSET 0x090c - -#define MV64x60_IDMA_BYTE_COUNT (0x0800 - MV64x60_IDMA_0_OFFSET) -#define MV64x60_IDMA_SRC_ADDR (0x0810 - MV64x60_IDMA_0_OFFSET) -#define MV64x60_IDMA_DST_ADDR (0x0820 - MV64x60_IDMA_0_OFFSET) -#define MV64x60_IDMA_NEXT_DESC (0x0830 - MV64x60_IDMA_0_OFFSET) -#define MV64x60_IDMA_CUR_DESC (0x0870 - MV64x60_IDMA_0_OFFSET) -#define MV64x60_IDMA_SRC_PCI_ADDR_HI (0x0890 - MV64x60_IDMA_0_OFFSET) -#define MV64x60_IDMA_DST_PCI_ADDR_HI (0x08a0 - MV64x60_IDMA_0_OFFSET) -#define MV64x60_IDMA_NEXT_DESC_PCI_ADDR_HI (0x08b0 - MV64x60_IDMA_0_OFFSET) -#define MV64x60_IDMA_CONTROL_LO (0x0840 - MV64x60_IDMA_0_OFFSET) -#define MV64x60_IDMA_CONTROL_HI (0x0880 - MV64x60_IDMA_0_OFFSET) - -#define MV64x60_IDMA_0_3_ARBITER_CNTL 0x0860 -#define MV64x60_IDMA_4_7_ARBITER_CNTL 0x0960 - -#define MV64x60_IDMA_0_3_XBAR_TO 0x08d0 -#define MV64x60_IDMA_4_7_XBAR_TO 0x09d0 - -#define MV64x60_IDMA_0_3_INTR_CAUSE 0x08c0 -#define MV64x60_IDMA_0_3_INTR_MASK 0x08c4 -#define MV64x60_IDMA_0_3_ERROR_ADDR 0x08c8 -#define MV64x60_IDMA_0_3_ERROR_SELECT 0x08cc -#define MV64x60_IDMA_4_7_INTR_CAUSE 0x09c0 -#define MV64x60_IDMA_4_7_INTR_MASK 0x09c4 -#define MV64x60_IDMA_4_7_ERROR_ADDR 0x09c8 -#define MV64x60_IDMA_4_7_ERROR_SELECT 0x09cc - -/* - ***************************************************************************** - * - * Watchdog Timer Interface Registers - * - ***************************************************************************** - */ - -#define MV64x60_WDT_WDC 0xb410 -#define MV64x60_WDT_WDV 0xb414 - - -/* - ***************************************************************************** - * - * General Purpose Pins Controller Interface Registers - * - ***************************************************************************** - */ - -#define MV64x60_GPP_IO_CNTL 0xf100 -#define MV64x60_GPP_LEVEL_CNTL 0xf110 -#define MV64x60_GPP_VALUE 0xf104 -#define MV64x60_GPP_INTR_CAUSE 0xf108 -#define MV64x60_GPP_INTR_MASK 0xf10c -#define MV64x60_GPP_VALUE_SET 0xf118 -#define MV64x60_GPP_VALUE_CLR 0xf11c - - -/* - ***************************************************************************** - * - * Multi-Purpose Pins Controller Interface Registers - * - ***************************************************************************** - */ - -#define MV64x60_MPP_CNTL_0 0xf000 -#define MV64x60_MPP_CNTL_1 0xf004 -#define MV64x60_MPP_CNTL_2 0xf008 -#define MV64x60_MPP_CNTL_3 0xf00c -#define GT64260_MPP_SERIAL_PORTS_MULTIPLEX 0xf010 - -#define MV64x60_ETH_BAR_GAP 0x8 -#define MV64x60_ETH_SIZE_REG_GAP 0x8 -#define MV64x60_ETH_HIGH_ADDR_REMAP_REG_GAP 0x4 -#define MV64x60_ETH_PORT_ACCESS_CTRL_GAP 0x4 - -#define MV64x60_EBAR_ATTR_DRAM_CS0 0x00000E00 -#define MV64x60_EBAR_ATTR_DRAM_CS1 0x00000D00 -#define MV64x60_EBAR_ATTR_DRAM_CS2 0x00000B00 -#define MV64x60_EBAR_ATTR_DRAM_CS3 0x00000700 - -#define MV64x60_EBAR_ATTR_CBS_SRAM_BLOCK0 0x00000000 -#define MV64x60_EBAR_ATTR_CBS_SRAM_BLOCK1 0x00000100 -#define MV64x60_EBAR_ATTR_CBS_SRAM 0x00000000 -#define MV64x60_EBAR_ATTR_CBS_CPU_BUS 0x00000800 - - -/* - ***************************************************************************** - * - * Interrupt Controller Interface Registers - * - ***************************************************************************** - */ - -#define GT64260_IC_OFFSET 0x0c18 - -#define GT64260_IC_MAIN_CAUSE_LO 0x0c18 -#define GT64260_IC_MAIN_CAUSE_HI 0x0c68 -#define GT64260_IC_CPU_INTR_MASK_LO 0x0c1c -#define GT64260_IC_CPU_INTR_MASK_HI 0x0c6c -#define GT64260_IC_CPU_SELECT_CAUSE 0x0c70 -#define GT64260_IC_PCI0_INTR_MASK_LO 0x0c24 -#define GT64260_IC_PCI0_INTR_MASK_HI 0x0c64 -#define GT64260_IC_PCI0_SELECT_CAUSE 0x0c74 -#define GT64260_IC_PCI1_INTR_MASK_LO 0x0ca4 -#define GT64260_IC_PCI1_INTR_MASK_HI 0x0ce4 -#define GT64260_IC_PCI1_SELECT_CAUSE 0x0cf4 -#define GT64260_IC_CPU_INT_0_MASK 0x0e60 -#define GT64260_IC_CPU_INT_1_MASK 0x0e64 -#define GT64260_IC_CPU_INT_2_MASK 0x0e68 -#define GT64260_IC_CPU_INT_3_MASK 0x0e6c - -#define MV64360_IC_OFFSET 0x0000 - -#define MV64360_IC_MAIN_CAUSE_LO 0x0004 -#define MV64360_IC_MAIN_CAUSE_HI 0x000c -#define MV64360_IC_CPU0_INTR_MASK_LO 0x0014 -#define MV64360_IC_CPU0_INTR_MASK_HI 0x001c -#define MV64360_IC_CPU0_SELECT_CAUSE 0x0024 -#define MV64360_IC_CPU1_INTR_MASK_LO 0x0034 -#define MV64360_IC_CPU1_INTR_MASK_HI 0x003c -#define MV64360_IC_CPU1_SELECT_CAUSE 0x0044 -#define MV64360_IC_INT0_MASK_LO 0x0054 -#define MV64360_IC_INT0_MASK_HI 0x005c -#define MV64360_IC_INT0_SELECT_CAUSE 0x0064 -#define MV64360_IC_INT1_MASK_LO 0x0074 -#define MV64360_IC_INT1_MASK_HI 0x007c -#define MV64360_IC_INT1_SELECT_CAUSE 0x0084 - -#endif /* __ASMPPC_MV64x60_DEFS_H */ diff --git a/include/asm-ppc/ocp.h b/include/asm-ppc/ocp.h deleted file mode 100644 index 3909a2eec286..000000000000 --- a/include/asm-ppc/ocp.h +++ /dev/null @@ -1,204 +0,0 @@ -/* - * ocp.h - * - * (c) Benjamin Herrenschmidt (benh@kernel.crashing.org) - * Mipsys - France - * - * Derived from work (c) Armin Kuster akuster@pacbell.net - * - * Additional support and port to 2.6 LDM/sysfs by - * Matt Porter <mporter@kernel.crashing.org> - * Copyright 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * TODO: - Add get/put interface & fixup locking to provide same API for - * 2.4 and 2.5 - * - Rework PM callbacks - */ - -#ifdef __KERNEL__ -#ifndef __OCP_H__ -#define __OCP_H__ - -#include <linux/init.h> -#include <linux/list.h> -#include <linux/device.h> -#include <linux/rwsem.h> - -#include <asm/mmu.h> -#include <asm/ocp_ids.h> - -#ifdef CONFIG_PPC_OCP - -#define OCP_MAX_IRQS 7 -#define MAX_EMACS 4 -#define OCP_IRQ_NA -1 /* used when ocp device does not have an irq */ -#define OCP_IRQ_MUL -2 /* used for ocp devices with multiply irqs */ -#define OCP_NULL_TYPE -1 /* used to mark end of list */ -#define OCP_CPM_NA 0 /* No Clock or Power Management avaliable */ -#define OCP_PADDR_NA 0 /* No MMIO registers */ - -#define OCP_ANY_ID (~0) -#define OCP_ANY_INDEX -1 - -extern struct list_head ocp_devices; -extern struct rw_semaphore ocp_devices_sem; - -struct ocp_device_id { - unsigned int vendor, function; /* Vendor and function ID or OCP_ANY_ID */ - unsigned long driver_data; /* Data private to the driver */ -}; - - -/* - * Static definition of an OCP device. - * - * @vendor: Vendor code. It is _STRONGLY_ discouraged to use - * the vendor code as a way to match a unique device, - * though I kept that possibility open, you should - * really define different function codes for different - * device types - * @function: This is the function code for this device. - * @index: This index is used for mapping the Nth function of a - * given core. This is typically used for cross-driver - * matching, like looking for a given MAL or ZMII from - * an EMAC or for getting to the proper set of DCRs. - * Indices are no longer magically calculated based on - * structure ordering, they have to be actually coded - * into the ocp_def to avoid any possible confusion - * I _STRONGLY_ (again ? wow !) encourage anybody relying - * on index mapping to encode the "target" index in an - * associated structure pointed to by "additions", see - * how it's done for the EMAC driver. - * @paddr: Device physical address (may not mean anything...) - * @irq: Interrupt line for this device (TODO: think about making - * an array with this) - * @pm: Currently, contains the bitmask in CPMFR DCR for the device - * @additions: Optionally points to a function specific structure - * providing additional informations for a given device - * instance. It's currently used by the EMAC driver for MAL - * channel & ZMII port mapping among others. - * @show: Optionally points to a function specific structure - * providing a sysfs show routine for additions fields. - */ -struct ocp_def { - unsigned int vendor; - unsigned int function; - int index; - phys_addr_t paddr; - int irq; - unsigned long pm; - void *additions; - void (*show)(struct device *); -}; - - -/* Struct for a given device instance */ -struct ocp_device { - struct list_head link; - char name[80]; /* device name */ - struct ocp_def *def; /* device definition */ - void *drvdata; /* driver data for this device */ - struct ocp_driver *driver; - u32 current_state; /* Current operating state. In ACPI-speak, - this is D0-D3, D0 being fully functional, - and D3 being off. */ - struct device dev; -}; - -struct ocp_driver { - struct list_head node; - char *name; - const struct ocp_device_id *id_table; /* NULL if wants all devices */ - int (*probe) (struct ocp_device *dev); /* New device inserted */ - void (*remove) (struct ocp_device *dev); /* Device removed (NULL if not a hot-plug capable driver) */ - int (*suspend) (struct ocp_device *dev, pm_message_t state); /* Device suspended */ - int (*resume) (struct ocp_device *dev); /* Device woken up */ - struct device_driver driver; -}; - -#define to_ocp_dev(n) container_of(n, struct ocp_device, dev) -#define to_ocp_drv(n) container_of(n, struct ocp_driver, driver) - -/* Similar to the helpers above, these manipulate per-ocp_dev - * driver-specific data. Currently stored as ocp_dev::ocpdev, - * a void pointer, but it is not present on older kernels. - */ -static inline void * -ocp_get_drvdata(struct ocp_device *pdev) -{ - return pdev->drvdata; -} - -static inline void -ocp_set_drvdata(struct ocp_device *pdev, void *data) -{ - pdev->drvdata = data; -} - -#if defined (CONFIG_PM) -/* - * This is right for the IBM 405 and 440 but will need to be - * generalized if the OCP stuff gets used on other processors. - */ -static inline void -ocp_force_power_off(struct ocp_device *odev) -{ - mtdcr(DCRN_CPMFR, mfdcr(DCRN_CPMFR) | odev->def->pm); -} - -static inline void -ocp_force_power_on(struct ocp_device *odev) -{ - mtdcr(DCRN_CPMFR, mfdcr(DCRN_CPMFR) & ~odev->def->pm); -} -#else -#define ocp_force_power_off(x) (void)(x) -#define ocp_force_power_on(x) (void)(x) -#endif - -/* Register/Unregister an OCP driver */ -extern int ocp_register_driver(struct ocp_driver *drv); -extern void ocp_unregister_driver(struct ocp_driver *drv); - -/* Build list of devices */ -extern int ocp_early_init(void) __init; - -/* Find a device by index */ -extern struct ocp_device *ocp_find_device(unsigned int vendor, unsigned int function, int index); - -/* Get a def by index */ -extern struct ocp_def *ocp_get_one_device(unsigned int vendor, unsigned int function, int index); - -/* Add a device by index */ -extern int ocp_add_one_device(struct ocp_def *def); - -/* Remove a device by index */ -extern int ocp_remove_one_device(unsigned int vendor, unsigned int function, int index); - -/* Iterate over devices and execute a routine */ -extern void ocp_for_each_device(void(*callback)(struct ocp_device *, void *arg), void *arg); - -/* Sysfs support */ -#define OCP_SYSFS_ADDTL(type, format, name, field) \ -static ssize_t \ -show_##name##_##field(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct ocp_device *odev = to_ocp_dev(dev); \ - type *add = odev->def->additions; \ - \ - return sprintf(buf, format, add->field); \ -} \ -static DEVICE_ATTR(name##_##field, S_IRUGO, show_##name##_##field, NULL); - -#ifdef CONFIG_IBM_OCP -#include <asm/ibm_ocp.h> -#endif - -#endif /* CONFIG_PPC_OCP */ -#endif /* __OCP_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/ocp_ids.h b/include/asm-ppc/ocp_ids.h deleted file mode 100644 index 8ae4b311a37c..000000000000 --- a/include/asm-ppc/ocp_ids.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * ocp_ids.h - * - * OCP device ids based on the ideas from PCI - * - * The numbers below are almost completely arbitrary, and in fact - * strings might work better. -- paulus - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/* - * Vender device - * [xxxx] [xxxx] - * - * Keep in order, please - */ - -/* Vendor IDs 0x0001 - 0xFFFF copied from pci_ids.h */ - -#define OCP_VENDOR_INVALID 0x0000 -#define OCP_VENDOR_ARM 0x0004 -#define OCP_VENDOR_FREESCALE 0x1057 -#define OCP_VENDOR_IBM 0x1014 -#define OCP_VENDOR_MOTOROLA OCP_VENDOR_FREESCALE -#define OCP_VENDOR_XILINX 0x10ee -#define OCP_VENDOR_UNKNOWN 0xFFFF - -/* device identification */ - -/* define type */ -#define OCP_FUNC_INVALID 0x0000 - -/* system 0x0001 - 0x001F */ - -/* Timers 0x0020 - 0x002F */ - -/* Serial 0x0030 - 0x006F*/ -#define OCP_FUNC_16550 0x0031 -#define OCP_FUNC_IIC 0x0032 -#define OCP_FUNC_USB 0x0033 -#define OCP_FUNC_PSC_UART 0x0034 - -/* Memory devices 0x0090 - 0x009F */ -#define OCP_FUNC_MAL 0x0090 -#define OCP_FUNC_DMA 0x0091 - -/* Display 0x00A0 - 0x00AF */ - -/* Sound 0x00B0 - 0x00BF */ - -/* Mass Storage 0x00C0 - 0xxCF */ -#define OCP_FUNC_IDE 0x00C0 - -/* Misc 0x00D0 - 0x00DF*/ -#define OCP_FUNC_GPIO 0x00D0 -#define OCP_FUNC_ZMII 0x00D1 -#define OCP_FUNC_PERFMON 0x00D2 /* Performance Monitor */ -#define OCP_FUNC_RGMII 0x00D3 -#define OCP_FUNC_TAH 0x00D4 -#define OCP_FUNC_SEC2 0x00D5 /* Crypto/Security 2.0 */ - -/* Network 0x0200 - 0x02FF */ -#define OCP_FUNC_EMAC 0x0200 -#define OCP_FUNC_GFAR 0x0201 /* TSEC & FEC */ - -/* Bridge devices 0xE00 - 0xEFF */ -#define OCP_FUNC_OPB 0x0E00 - -#define OCP_FUNC_UNKNOWN 0xFFFF diff --git a/include/asm-ppc/open_pic.h b/include/asm-ppc/open_pic.h deleted file mode 100644 index 778d5726212c..000000000000 --- a/include/asm-ppc/open_pic.h +++ /dev/null @@ -1,98 +0,0 @@ -/* - * include/asm-ppc/open_pic.h -- OpenPIC Interrupt Handling - * - * Copyright (C) 1997 Geert Uytterhoeven - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - * - */ - -#ifndef _PPC_KERNEL_OPEN_PIC_H -#define _PPC_KERNEL_OPEN_PIC_H - -#include <linux/irq.h> - -#define OPENPIC_SIZE 0x40000 - -/* - * Non-offset'ed vector numbers - */ - -#define OPENPIC_VEC_TIMER 110 /* and up */ -#define OPENPIC_VEC_IPI 118 /* and up */ -#define OPENPIC_VEC_SPURIOUS 255 - -/* Priorities */ -#define OPENPIC_PRIORITY_IPI_BASE 10 -#define OPENPIC_PRIORITY_DEFAULT 4 -#define OPENPIC_PRIORITY_NMI 9 - -/* OpenPIC IRQ controller structure */ -extern struct hw_interrupt_type open_pic; - -/* OpenPIC IPI controller structure */ -#ifdef CONFIG_SMP -extern struct hw_interrupt_type open_pic_ipi; -#endif /* CONFIG_SMP */ - -extern u_int OpenPIC_NumInitSenses; -extern u_char *OpenPIC_InitSenses; -extern void __iomem * OpenPIC_Addr; -extern int epic_serial_mode; - -/* Exported functions */ -extern void openpic_set_sources(int first_irq, int num_irqs, void __iomem *isr); -extern void openpic_init(int linux_irq_offset); -extern void openpic_init_nmi_irq(u_int irq); -extern void openpic_set_irq_priority(u_int irq, u_int pri); -extern void openpic_hookup_cascade(u_int irq, char *name, - int (*cascade_fn)(void)); -extern u_int openpic_irq(void); -extern void openpic_eoi(void); -extern void openpic_request_IPIs(void); -extern void do_openpic_setup_cpu(void); -extern int openpic_get_irq(void); -extern void openpic_reset_processor_phys(u_int cpumask); -extern void openpic_setup_ISU(int isu_num, unsigned long addr); -extern void openpic_cause_IPI(u_int ipi, cpumask_t cpumask); -extern void smp_openpic_message_pass(int target, int msg); -extern void openpic_set_k2_cascade(int irq); -extern void openpic_set_priority(u_int pri); -extern u_int openpic_get_priority(void); - -extern inline int openpic_to_irq(int irq) -{ - /* IRQ 0 usually means 'disabled'.. don't mess with it - * exceptions to this (sandpoint maybe?) - * shouldn't use openpic_to_irq - */ - if (irq != 0){ - return irq += NUM_8259_INTERRUPTS; - } else { - return 0; - } -} -/* Support for second openpic on G5 macs */ - -// FIXME: To be replaced by sane cascaded controller management */ - -#define PMAC_OPENPIC2_OFFSET 128 - -#define OPENPIC2_VEC_TIMER 110 /* and up */ -#define OPENPIC2_VEC_IPI 118 /* and up */ -#define OPENPIC2_VEC_SPURIOUS 127 - - -extern void* OpenPIC2_Addr; - -/* Exported functions */ -extern void openpic2_set_sources(int first_irq, int num_irqs, void *isr); -extern void openpic2_init(int linux_irq_offset); -extern void openpic2_init_nmi_irq(u_int irq); -extern u_int openpic2_irq(void); -extern void openpic2_eoi(void); -extern int openpic2_get_irq(void); -extern void openpic2_setup_ISU(int isu_num, unsigned long addr); -#endif /* _PPC_KERNEL_OPEN_PIC_H */ diff --git a/include/asm-ppc/page.h b/include/asm-ppc/page.h deleted file mode 100644 index 37e4756b6b2d..000000000000 --- a/include/asm-ppc/page.h +++ /dev/null @@ -1,140 +0,0 @@ -#ifndef _PPC_PAGE_H -#define _PPC_PAGE_H - -#include <asm/asm-compat.h> - -/* PAGE_SHIFT determines the page size */ -#define PAGE_SHIFT 12 -#define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT) - -/* - * Subtle: this is an int (not an unsigned long) and so it - * gets extended to 64 bits the way want (i.e. with 1s). -- paulus - */ -#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1)) - -#ifdef __KERNEL__ - -/* This must match what is in arch/ppc/Makefile */ -#define PAGE_OFFSET CONFIG_KERNEL_START -#define KERNELBASE PAGE_OFFSET -#define is_kernel_addr(x) ((x) >= PAGE_OFFSET) - -#ifndef __ASSEMBLY__ - -/* - * The basic type of a PTE - 64 bits for those CPUs with > 32 bit - * physical addressing. For now this just the IBM PPC440. - */ -#ifdef CONFIG_PTE_64BIT -typedef unsigned long long pte_basic_t; -#define PTE_SHIFT (PAGE_SHIFT - 3) /* 512 ptes per page */ -#define PTE_FMT "%16Lx" -#else -typedef unsigned long pte_basic_t; -#define PTE_SHIFT (PAGE_SHIFT - 2) /* 1024 ptes per page */ -#define PTE_FMT "%.8lx" -#endif - -/* align addr on a size boundary - adjust address up/down if needed */ -#define _ALIGN_UP(addr,size) (((addr)+((size)-1))&(~((size)-1))) -#define _ALIGN_DOWN(addr,size) ((addr)&(~((size)-1))) - -/* align addr on a size boundary - adjust address up if needed */ -#define _ALIGN(addr,size) _ALIGN_UP(addr,size) - -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) _ALIGN(addr, PAGE_SIZE) - - -#undef STRICT_MM_TYPECHECKS - -#ifdef STRICT_MM_TYPECHECKS -/* - * These are used to make use of C type-checking.. - */ -typedef struct { pte_basic_t pte; } pte_t; -typedef struct { unsigned long pmd; } pmd_t; -typedef struct { unsigned long pgd; } pgd_t; -typedef struct { unsigned long pgprot; } pgprot_t; - -#define pte_val(x) ((x).pte) -#define pmd_val(x) ((x).pmd) -#define pgd_val(x) ((x).pgd) -#define pgprot_val(x) ((x).pgprot) - -#define __pte(x) ((pte_t) { (x) } ) -#define __pmd(x) ((pmd_t) { (x) } ) -#define __pgd(x) ((pgd_t) { (x) } ) -#define __pgprot(x) ((pgprot_t) { (x) } ) - -#else -/* - * .. while these make it easier on the compiler - */ -typedef pte_basic_t pte_t; -typedef unsigned long pmd_t; -typedef unsigned long pgd_t; -typedef unsigned long pgprot_t; - -#define pte_val(x) (x) -#define pmd_val(x) (x) -#define pgd_val(x) (x) -#define pgprot_val(x) (x) - -#define __pte(x) (x) -#define __pmd(x) (x) -#define __pgd(x) (x) -#define __pgprot(x) (x) - -#endif - -struct page; -extern void clear_pages(void *page, int order); -static inline void clear_page(void *page) { clear_pages(page, 0); } -extern void copy_page(void *to, void *from); -extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg); -extern void copy_user_page(void *to, void *from, unsigned long vaddr, - struct page *pg); - -#define PPC_MEMSTART 0 -#define PPC_MEMOFFSET PAGE_OFFSET - -#define ___pa(vaddr) ((vaddr)-PPC_MEMOFFSET) -#define ___va(paddr) ((paddr)+PPC_MEMOFFSET) - -extern int page_is_ram(unsigned long pfn); - -#define __pa(x) ___pa((unsigned long)(x)) -#define __va(x) ((void *)(___va((unsigned long)(x)))) - -#define ARCH_PFN_OFFSET 0 -#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) -#define page_to_virt(page) __va(page_to_pfn(page) << PAGE_SHIFT) - -#define pfn_valid(pfn) ((pfn) < max_mapnr) -#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) - -/* Pure 2^n version of get_order */ -extern __inline__ int get_order(unsigned long size) -{ - int lz; - - size = (size-1) >> PAGE_SHIFT; - asm ("cntlzw %0,%1" : "=r" (lz) : "r" (size)); - return 32 - lz; -} - -typedef struct page *pgtable_t; - -#endif /* __ASSEMBLY__ */ - -#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -/* We do define AT_SYSINFO_EHDR but don't use the gate mechanism */ -#define __HAVE_ARCH_GATE_AREA 1 - -#include <asm-generic/memory_model.h> -#endif /* __KERNEL__ */ -#endif /* _PPC_PAGE_H */ diff --git a/include/asm-ppc/pc_serial.h b/include/asm-ppc/pc_serial.h deleted file mode 100644 index 81a2d0fdaf00..000000000000 --- a/include/asm-ppc/pc_serial.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * include/asm-ppc/pc_serial.h - * - * This is basically a copy of include/asm-i386/serial.h. - * It is used on platforms which have an ISA bus and thus are likely - * to have PC-style serial ports at the legacy I/O port addresses. - * It also includes the definitions for the fourport, accent, boca - * and hub6 multiport serial cards, although I have never heard of - * anyone using any of those on a PPC platform. -- paulus - */ - - -/* - * This assumes you have a 1.8432 MHz clock for your UART. - * - * It'd be nice if someone built a serial card with a 24.576 MHz - * clock, since the 16550A is capable of handling a top speed of 1.5 - * megabits/second; but this requires the faster clock. - */ -#define BASE_BAUD ( 1843200 / 16 ) - -#ifdef CONFIG_SERIAL_MANY_PORTS -#define RS_TABLE_SIZE 64 -#else -#define RS_TABLE_SIZE 4 -#endif - -/* Standard COM flags (except for COM4, because of the 8514 problem) */ -#ifdef CONFIG_SERIAL_DETECT_IRQ -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ) -#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ) -#else -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) -#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF -#endif - -#define SERIAL_PORT_DFNS \ - /* UART CLK PORT IRQ FLAGS */ \ - { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS }, /* ttyS0 */ \ - { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS }, /* ttyS1 */ \ - { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS }, /* ttyS2 */ \ - { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS }, /* ttyS3 */ diff --git a/include/asm-ppc/pci-bridge.h b/include/asm-ppc/pci-bridge.h deleted file mode 100644 index 4d35b844bc58..000000000000 --- a/include/asm-ppc/pci-bridge.h +++ /dev/null @@ -1,151 +0,0 @@ -#ifdef __KERNEL__ -#ifndef _ASM_PCI_BRIDGE_H -#define _ASM_PCI_BRIDGE_H - -#include <linux/ioport.h> -#include <linux/pci.h> - -struct device_node; -struct pci_controller; - -/* - * pci_io_base returns the memory address at which you can access - * the I/O space for PCI bus number `bus' (or NULL on error). - */ -extern void __iomem *pci_bus_io_base(unsigned int bus); -extern unsigned long pci_bus_io_base_phys(unsigned int bus); -extern unsigned long pci_bus_mem_base_phys(unsigned int bus); - -/* Allocate a new PCI host bridge structure */ -extern struct pci_controller* pcibios_alloc_controller(void); - -/* Helper function for setting up resources */ -extern void pci_init_resource(struct resource *res, resource_size_t start, - resource_size_t end, int flags, char *name); - -/* Get the PCI host controller for a bus */ -extern struct pci_controller* pci_bus_to_hose(int bus); - -/* Get the PCI host controller for an OF device */ -extern struct pci_controller* -pci_find_hose_for_OF_device(struct device_node* node); - -/* Fill up host controller resources from the OF node */ -extern void -pci_process_bridge_OF_ranges(struct pci_controller *hose, - struct device_node *dev, int primary); - -/* - * Structure of a PCI controller (host bridge) - */ -struct pci_controller { - int index; /* PCI domain number */ - struct pci_controller *next; - struct pci_bus *bus; - void *arch_data; - struct device *parent; - - int first_busno; - int last_busno; - int bus_offset; - - void __iomem *io_base_virt; - resource_size_t io_base_phys; - - /* Some machines (PReP) have a non 1:1 mapping of - * the PCI memory space in the CPU bus space - */ - resource_size_t pci_mem_offset; - - struct pci_ops *ops; - volatile unsigned int __iomem *cfg_addr; - volatile void __iomem *cfg_data; - /* - * If set, indirect method will set the cfg_type bit as - * needed to generate type 1 configuration transactions. - */ - int set_cfg_type; - - /* Currently, we limit ourselves to 1 IO range and 3 mem - * ranges since the common pci_bus structure can't handle more - */ - struct resource io_resource; - struct resource mem_resources[3]; - int mem_resource_count; - - /* Host bridge I/O and Memory space - * Used for BAR placement algorithms - */ - struct resource io_space; - struct resource mem_space; -}; - -static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus) -{ - return bus->sysdata; -} - -/* These are used for config access before all the PCI probing - has been done. */ -int early_read_config_byte(struct pci_controller *hose, int bus, int dev_fn, - int where, u8 *val); -int early_read_config_word(struct pci_controller *hose, int bus, int dev_fn, - int where, u16 *val); -int early_read_config_dword(struct pci_controller *hose, int bus, int dev_fn, - int where, u32 *val); -int early_write_config_byte(struct pci_controller *hose, int bus, int dev_fn, - int where, u8 val); -int early_write_config_word(struct pci_controller *hose, int bus, int dev_fn, - int where, u16 val); -int early_write_config_dword(struct pci_controller *hose, int bus, int dev_fn, - int where, u32 val); - -extern void setup_indirect_pci_nomap(struct pci_controller* hose, - void __iomem *cfg_addr, void __iomem *cfg_data); -extern void setup_indirect_pci(struct pci_controller* hose, - u32 cfg_addr, u32 cfg_data); -extern void setup_grackle(struct pci_controller *hose); - -extern unsigned char common_swizzle(struct pci_dev *, unsigned char *); - -/* - * The following code swizzles for exactly one bridge. The routine - * common_swizzle below handles multiple bridges. But there are a - * some boards that don't follow the PCI spec's suggestion so we - * break this piece out separately. - */ -static inline unsigned char bridge_swizzle(unsigned char pin, - unsigned char idsel) -{ - return (((pin-1) + idsel) % 4) + 1; -} - -/* - * The following macro is used to lookup irqs in a standard table - * format for those PPC systems that do not already have PCI - * interrupts properly routed. - */ -/* FIXME - double check this */ -#define PCI_IRQ_TABLE_LOOKUP \ -({ long _ctl_ = -1; \ - if (idsel >= min_idsel && idsel <= max_idsel && pin <= irqs_per_slot) \ - _ctl_ = pci_irq_table[idsel - min_idsel][pin-1]; \ - _ctl_; }) - -/* - * Scan the buses below a given PCI host bridge and assign suitable - * resources to all devices found. - */ -extern int pciauto_bus_scan(struct pci_controller *, int); - -#ifdef CONFIG_PCI -extern unsigned long pci_address_to_pio(phys_addr_t address); -#else -static inline unsigned long pci_address_to_pio(phys_addr_t address) -{ - return (unsigned long)-1; -} -#endif - -#endif -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/pci.h b/include/asm-ppc/pci.h deleted file mode 100644 index d2442cd72a59..000000000000 --- a/include/asm-ppc/pci.h +++ /dev/null @@ -1,156 +0,0 @@ -#ifndef __PPC_PCI_H -#define __PPC_PCI_H -#ifdef __KERNEL__ - -#include <linux/types.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <asm/scatterlist.h> -#include <asm/io.h> -#include <asm/pci-bridge.h> -#include <asm-generic/pci-dma-compat.h> - -struct pci_dev; - -/* Values for the `which' argument to sys_pciconfig_iobase syscall. */ -#define IOBASE_BRIDGE_NUMBER 0 -#define IOBASE_MEMORY 1 -#define IOBASE_IO 2 -#define IOBASE_ISA_IO 3 -#define IOBASE_ISA_MEM 4 - -/* - * Set this to 1 if you want the kernel to re-assign all PCI - * bus numbers - */ -extern int pci_assign_all_buses; - -#define pcibios_assign_all_busses() (pci_assign_all_buses) -#define pcibios_scan_all_fns(a, b) 0 - -#define PCIBIOS_MIN_IO 0x1000 -#define PCIBIOS_MIN_MEM 0x10000000 - -extern inline void pcibios_set_master(struct pci_dev *dev) -{ - /* No special bus mastering setup handling */ -} - -extern inline void pcibios_penalize_isa_irq(int irq, int active) -{ - /* We don't do dynamic PCI IRQ allocation */ -} - -extern unsigned long pci_resource_to_bus(struct pci_dev *pdev, struct resource *res); - -/* - * The PCI bus bridge can translate addresses issued by the processor(s) - * into a different address on the PCI bus. On 32-bit cpus, we assume - * this mapping is 1-1, but on 64-bit systems it often isn't. - * - * Obsolete ! Drivers should now use pci_resource_to_bus - */ -extern unsigned long phys_to_bus(unsigned long pa); -extern unsigned long pci_phys_to_bus(unsigned long pa, int busnr); -extern unsigned long pci_bus_to_phys(unsigned int ba, int busnr); - -/* The PCI address space does equal the physical memory - * address space. The networking and block device layers use - * this boolean for bounce buffer decisions. - */ -#define PCI_DMA_BUS_IS_PHYS (1) - -#ifdef CONFIG_NOT_COHERENT_CACHE -/* - * pci_unmap_{page,single} are NOPs but pci_dma_sync_single_for_cpu() - * and so on are not, so... - */ - -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ - dma_addr_t ADDR_NAME; -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ - __u32 LEN_NAME; -#define pci_unmap_addr(PTR, ADDR_NAME) \ - ((PTR)->ADDR_NAME) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ - (((PTR)->ADDR_NAME) = (VAL)) -#define pci_unmap_len(PTR, LEN_NAME) \ - ((PTR)->LEN_NAME) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ - (((PTR)->LEN_NAME) = (VAL)) - -#else /* coherent */ - -/* pci_unmap_{page,single} is a nop so... */ -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) -#define pci_unmap_addr(PTR, ADDR_NAME) (0) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) -#define pci_unmap_len(PTR, LEN_NAME) (0) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) - -#endif /* CONFIG_NOT_COHERENT_CACHE */ - -#ifdef CONFIG_PCI -static inline void pci_dma_burst_advice(struct pci_dev *pdev, - enum pci_dma_burst_strategy *strat, - unsigned long *strategy_parameter) -{ - *strat = PCI_DMA_BURST_INFINITY; - *strategy_parameter = ~0UL; -} -#endif - -/* Return the index of the PCI controller for device PDEV. */ -#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index - -/* Set the name of the bus as it appears in /proc/bus/pci */ -static inline int pci_proc_domain(struct pci_bus *bus) -{ - return 0; -} - -/* Map a range of PCI memory or I/O space for a device into user space */ -int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma, - enum pci_mmap_state mmap_state, int write_combine); - -/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */ -#define HAVE_PCI_MMAP 1 - -extern void -pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, - struct resource *res); - -extern void -pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, - struct pci_bus_region *region); - -static inline struct resource * -pcibios_select_root(struct pci_dev *pdev, struct resource *res) -{ - struct resource *root = NULL; - - if (res->flags & IORESOURCE_IO) - root = &ioport_resource; - if (res->flags & IORESOURCE_MEM) - root = &iomem_resource; - - return root; -} - -struct file; -extern pgprot_t pci_phys_mem_access_prot(struct file *file, - unsigned long pfn, - unsigned long size, - pgprot_t prot); - -#define HAVE_ARCH_PCI_RESOURCE_TO_USER -extern void pci_resource_to_user(const struct pci_dev *dev, int bar, - const struct resource *rsrc, - resource_size_t *start, resource_size_t *end); - - -#endif /* __KERNEL__ */ - -#endif /* __PPC_PCI_H */ diff --git a/include/asm-ppc/pgalloc.h b/include/asm-ppc/pgalloc.h deleted file mode 100644 index fd4d1d74cfb1..000000000000 --- a/include/asm-ppc/pgalloc.h +++ /dev/null @@ -1,45 +0,0 @@ -#ifdef __KERNEL__ -#ifndef _PPC_PGALLOC_H -#define _PPC_PGALLOC_H - -#include <linux/threads.h> - -extern void __bad_pte(pmd_t *pmd); - -extern pgd_t *pgd_alloc(struct mm_struct *mm); -extern void pgd_free(struct mm_struct *mm, pgd_t *pgd); - -/* - * We don't have any real pmd's, and this code never triggers because - * the pgd will always be present.. - */ -#define pmd_alloc_one(mm,address) ({ BUG(); ((pmd_t *)2); }) -#define pmd_free(mm, x) do { } while (0) -#define __pmd_free_tlb(tlb,x) do { } while (0) -#define pgd_populate(mm, pmd, pte) BUG() - -#ifndef CONFIG_BOOKE -#define pmd_populate_kernel(mm, pmd, pte) \ - (pmd_val(*(pmd)) = __pa(pte) | _PMD_PRESENT) -#define pmd_populate(mm, pmd, pte) \ - (pmd_val(*(pmd)) = (page_to_pfn(pte) << PAGE_SHIFT) | _PMD_PRESENT) -#define pmd_pgtable(pmd) pmd_page(pmd) -#else -#define pmd_populate_kernel(mm, pmd, pte) \ - (pmd_val(*(pmd)) = (unsigned long)pte | _PMD_PRESENT) -#define pmd_populate(mm, pmd, pte) \ - (pmd_val(*(pmd)) = (unsigned long)lowmem_page_address(pte) | _PMD_PRESENT) -#define pmd_pgtable(pmd) pmd_page(pmd) -#endif - -extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr); -extern pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addr); -extern void pte_free_kernel(struct mm_struct *mm, pte_t *pte); -extern void pte_free(struct mm_struct *mm, pgtable_t pte); - -#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte)) - -#define check_pgt_cache() do { } while (0) - -#endif /* _PPC_PGALLOC_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/pgtable.h b/include/asm-ppc/pgtable.h deleted file mode 100644 index 55f9d38e3bf8..000000000000 --- a/include/asm-ppc/pgtable.h +++ /dev/null @@ -1,771 +0,0 @@ -#ifdef __KERNEL__ -#ifndef _PPC_PGTABLE_H -#define _PPC_PGTABLE_H - -#include <asm-generic/4level-fixup.h> - - -#ifndef __ASSEMBLY__ -#include <linux/sched.h> -#include <linux/threads.h> -#include <asm/processor.h> /* For TASK_SIZE */ -#include <asm/mmu.h> -#include <asm/page.h> -#include <asm/io.h> /* For sub-arch specific PPC_PIN_SIZE */ -struct mm_struct; - -extern unsigned long va_to_phys(unsigned long address); -extern pte_t *va_to_pte(unsigned long address); -extern unsigned long ioremap_bot, ioremap_base; -#endif /* __ASSEMBLY__ */ - -/* - * The PowerPC MMU uses a hash table containing PTEs, together with - * a set of 16 segment registers (on 32-bit implementations), to define - * the virtual to physical address mapping. - * - * We use the hash table as an extended TLB, i.e. a cache of currently - * active mappings. We maintain a two-level page table tree, much - * like that used by the i386, for the sake of the Linux memory - * management code. Low-level assembler code in hashtable.S - * (procedure hash_page) is responsible for extracting ptes from the - * tree and putting them into the hash table when necessary, and - * updating the accessed and modified bits in the page table tree. - */ - -/* - * The PowerPC MPC8xx uses a TLB with hardware assisted, software tablewalk. - * We also use the two level tables, but we can put the real bits in them - * needed for the TLB and tablewalk. These definitions require Mx_CTR.PPM = 0, - * Mx_CTR.PPCS = 0, and MD_CTR.TWAM = 1. The level 2 descriptor has - * additional page protection (when Mx_CTR.PPCS = 1) that allows TLB hit - * based upon user/super access. The TLB does not have accessed nor write - * protect. We assume that if the TLB get loaded with an entry it is - * accessed, and overload the changed bit for write protect. We use - * two bits in the software pte that are supposed to be set to zero in - * the TLB entry (24 and 25) for these indicators. Although the level 1 - * descriptor contains the guarded and writethrough/copyback bits, we can - * set these at the page level since they get copied from the Mx_TWC - * register when the TLB entry is loaded. We will use bit 27 for guard, since - * that is where it exists in the MD_TWC, and bit 26 for writethrough. - * These will get masked from the level 2 descriptor at TLB load time, and - * copied to the MD_TWC before it gets loaded. - * Large page sizes added. We currently support two sizes, 4K and 8M. - * This also allows a TLB hander optimization because we can directly - * load the PMD into MD_TWC. The 8M pages are only used for kernel - * mapping of well known areas. The PMD (PGD) entries contain control - * flags in addition to the address, so care must be taken that the - * software no longer assumes these are only pointers. - */ - -/* - * At present, all PowerPC 400-class processors share a similar TLB - * architecture. The instruction and data sides share a unified, - * 64-entry, fully-associative TLB which is maintained totally under - * software control. In addition, the instruction side has a - * hardware-managed, 4-entry, fully-associative TLB which serves as a - * first level to the shared TLB. These two TLBs are known as the UTLB - * and ITLB, respectively (see "mmu.h" for definitions). - */ - -/* - * The normal case is that PTEs are 32-bits and we have a 1-page - * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages. -- paulus - * - * For any >32-bit physical address platform, we can use the following - * two level page table layout where the pgdir is 8KB and the MS 13 bits - * are an index to the second level table. The combined pgdir/pmd first - * level has 2048 entries and the second level has 512 64-bit PTE entries. - * -Matt - */ -/* PMD_SHIFT determines the size of the area mapped by the PTE pages */ -#define PMD_SHIFT (PAGE_SHIFT + PTE_SHIFT) -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PMD_MASK (~(PMD_SIZE-1)) - -/* PGDIR_SHIFT determines what a top-level page table entry can map */ -#define PGDIR_SHIFT PMD_SHIFT -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) - -/* - * entries per page directory level: our page-table tree is two-level, so - * we don't really have any PMD directory. - */ -#define PTRS_PER_PTE (1 << PTE_SHIFT) -#define PTRS_PER_PMD 1 -#define PTRS_PER_PGD (1 << (32 - PGDIR_SHIFT)) - -#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) -#define FIRST_USER_ADDRESS 0 - -#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT) -#define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS) - -#define pte_ERROR(e) \ - printk("%s:%d: bad pte "PTE_FMT".\n", __FILE__, __LINE__, pte_val(e)) -#define pmd_ERROR(e) \ - printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) -#define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) - -/* - * Just any arbitrary offset to the start of the vmalloc VM area: the - * current 64MB value just means that there will be a 64MB "hole" after the - * physical memory until the kernel virtual memory starts. That means that - * any out-of-bounds memory accesses will hopefully be caught. - * The vmalloc() routines leaves a hole of 4kB between each vmalloced - * area for the same reason. ;) - * - * We no longer map larger than phys RAM with the BATs so we don't have - * to worry about the VMALLOC_OFFSET causing problems. We do have to worry - * about clashes between our early calls to ioremap() that start growing down - * from ioremap_base being run into the VM area allocations (growing upwards - * from VMALLOC_START). For this reason we have ioremap_bot to check when - * we actually run into our mappings setup in the early boot with the VM - * system. This really does become a problem for machines with good amounts - * of RAM. -- Cort - */ -#define VMALLOC_OFFSET (0x1000000) /* 16M */ -#ifdef PPC_PIN_SIZE -#define VMALLOC_START (((_ALIGN((long)high_memory, PPC_PIN_SIZE) + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))) -#else -#define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))) -#endif -#define VMALLOC_END ioremap_bot - -/* - * Bits in a linux-style PTE. These match the bits in the - * (hardware-defined) PowerPC PTE as closely as possible. - */ - -#if defined(CONFIG_40x) - -/* There are several potential gotchas here. The 40x hardware TLBLO - field looks like this: - - 0 1 2 3 4 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31 - RPN..................... 0 0 EX WR ZSEL....... W I M G - - Where possible we make the Linux PTE bits match up with this - - - bits 20 and 21 must be cleared, because we use 4k pages (40x can - support down to 1k pages), this is done in the TLBMiss exception - handler. - - We use only zones 0 (for kernel pages) and 1 (for user pages) - of the 16 available. Bit 24-26 of the TLB are cleared in the TLB - miss handler. Bit 27 is PAGE_USER, thus selecting the correct - zone. - - PRESENT *must* be in the bottom two bits because swap cache - entries use the top 30 bits. Because 40x doesn't support SMP - anyway, M is irrelevant so we borrow it for PAGE_PRESENT. Bit 30 - is cleared in the TLB miss handler before the TLB entry is loaded. - - All other bits of the PTE are loaded into TLBLO without - modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for - software PTE bits. We actually use use bits 21, 24, 25, and - 30 respectively for the software bits: ACCESSED, DIRTY, RW, and - PRESENT. -*/ - -/* Definitions for 40x embedded chips. */ -#define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */ -#define _PAGE_FILE 0x001 /* when !present: nonlinear file mapping */ -#define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */ -#define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */ -#define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */ -#define _PAGE_USER 0x010 /* matches one of the zone permission bits */ -#define _PAGE_RW 0x040 /* software: Writes permitted */ -#define _PAGE_DIRTY 0x080 /* software: dirty page */ -#define _PAGE_HWWRITE 0x100 /* hardware: Dirty & RW, set in exception */ -#define _PAGE_HWEXEC 0x200 /* hardware: EX permission */ -#define _PAGE_ACCESSED 0x400 /* software: R: page referenced */ - -#define _PMD_PRESENT 0x400 /* PMD points to page of PTEs */ -#define _PMD_BAD 0x802 -#define _PMD_SIZE 0x0e0 /* size field, != 0 for large-page PMD entry */ -#define _PMD_SIZE_4M 0x0c0 -#define _PMD_SIZE_16M 0x0e0 -#define PMD_PAGE_SIZE(pmdval) (1024 << (((pmdval) & _PMD_SIZE) >> 4)) - -#elif defined(CONFIG_44x) -/* - * Definitions for PPC440 - * - * Because of the 3 word TLB entries to support 36-bit addressing, - * the attribute are difficult to map in such a fashion that they - * are easily loaded during exception processing. I decided to - * organize the entry so the ERPN is the only portion in the - * upper word of the PTE and the attribute bits below are packed - * in as sensibly as they can be in the area below a 4KB page size - * oriented RPN. This at least makes it easy to load the RPN and - * ERPN fields in the TLB. -Matt - * - * Note that these bits preclude future use of a page size - * less than 4KB. - * - * - * PPC 440 core has following TLB attribute fields; - * - * TLB1: - * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 - * RPN................................. - - - - - - ERPN....... - * - * TLB2: - * 0 1 2 3 4 ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 - * - - - - - - U0 U1 U2 U3 W I M G E - UX UW UR SX SW SR - * - * There are some constrains and options, to decide mapping software bits - * into TLB entry. - * - * - PRESENT *must* be in the bottom three bits because swap cache - * entries use the top 29 bits for TLB2. - * - * - FILE *must* be in the bottom three bits because swap cache - * entries use the top 29 bits for TLB2. - * - * - CACHE COHERENT bit (M) has no effect on PPC440 core, because it - * doesn't support SMP. So we can use this as software bit, like - * DIRTY. - * - * With the PPC 44x Linux implementation, the 0-11th LSBs of the PTE are used - * for memory protection related functions (see PTE structure in - * include/asm-ppc/mmu.h). The _PAGE_XXX definitions in this file map to the - * above bits. Note that the bit values are CPU specific, not architecture - * specific. - * - * The kernel PTE entry holds an arch-dependent swp_entry structure under - * certain situations. In other words, in such situations some portion of - * the PTE bits are used as a swp_entry. In the PPC implementation, the - * 3-24th LSB are shared with swp_entry, however the 0-2nd three LSB still - * hold protection values. That means the three protection bits are - * reserved for both PTE and SWAP entry at the most significant three - * LSBs. - * - * There are three protection bits available for SWAP entry: - * _PAGE_PRESENT - * _PAGE_FILE - * _PAGE_HASHPTE (if HW has) - * - * So those three bits have to be inside of 0-2nd LSB of PTE. - * - */ - -#define _PAGE_PRESENT 0x00000001 /* S: PTE valid */ -#define _PAGE_RW 0x00000002 /* S: Write permission */ -#define _PAGE_FILE 0x00000004 /* S: nonlinear file mapping */ -#define _PAGE_ACCESSED 0x00000008 /* S: Page referenced */ -#define _PAGE_HWWRITE 0x00000010 /* H: Dirty & RW */ -#define _PAGE_HWEXEC 0x00000020 /* H: Execute permission */ -#define _PAGE_USER 0x00000040 /* S: User page */ -#define _PAGE_ENDIAN 0x00000080 /* H: E bit */ -#define _PAGE_GUARDED 0x00000100 /* H: G bit */ -#define _PAGE_DIRTY 0x00000200 /* S: Page dirty */ -#define _PAGE_NO_CACHE 0x00000400 /* H: I bit */ -#define _PAGE_WRITETHRU 0x00000800 /* H: W bit */ - -/* TODO: Add large page lowmem mapping support */ -#define _PMD_PRESENT 0 -#define _PMD_PRESENT_MASK (PAGE_MASK) -#define _PMD_BAD (~PAGE_MASK) - -/* ERPN in a PTE never gets cleared, ignore it */ -#define _PTE_NONE_MASK 0xffffffff00000000ULL - -#elif defined(CONFIG_8xx) -/* Definitions for 8xx embedded chips. */ -#define _PAGE_PRESENT 0x0001 /* Page is valid */ -#define _PAGE_FILE 0x0002 /* when !present: nonlinear file mapping */ -#define _PAGE_NO_CACHE 0x0002 /* I: cache inhibit */ -#define _PAGE_SHARED 0x0004 /* No ASID (context) compare */ - -/* These five software bits must be masked out when the entry is loaded - * into the TLB. - */ -#define _PAGE_EXEC 0x0008 /* software: i-cache coherency required */ -#define _PAGE_GUARDED 0x0010 /* software: guarded access */ -#define _PAGE_DIRTY 0x0020 /* software: page changed */ -#define _PAGE_RW 0x0040 /* software: user write access allowed */ -#define _PAGE_ACCESSED 0x0080 /* software: page referenced */ - -/* Setting any bits in the nibble with the follow two controls will - * require a TLB exception handler change. It is assumed unused bits - * are always zero. - */ -#define _PAGE_HWWRITE 0x0100 /* h/w write enable: never set in Linux PTE */ -#define _PAGE_USER 0x0800 /* One of the PP bits, the other is USER&~RW */ - -#define _PMD_PRESENT 0x0001 -#define _PMD_BAD 0x0ff0 -#define _PMD_PAGE_MASK 0x000c -#define _PMD_PAGE_8M 0x000c - -#define _PTE_NONE_MASK _PAGE_ACCESSED - -#else /* CONFIG_6xx */ -/* Definitions for 60x, 740/750, etc. */ -#define _PAGE_PRESENT 0x001 /* software: pte contains a translation */ -#define _PAGE_HASHPTE 0x002 /* hash_page has made an HPTE for this pte */ -#define _PAGE_FILE 0x004 /* when !present: nonlinear file mapping */ -#define _PAGE_USER 0x004 /* usermode access allowed */ -#define _PAGE_GUARDED 0x008 /* G: prohibit speculative access */ -#define _PAGE_COHERENT 0x010 /* M: enforce memory coherence (SMP systems) */ -#define _PAGE_NO_CACHE 0x020 /* I: cache inhibit */ -#define _PAGE_WRITETHRU 0x040 /* W: cache write-through */ -#define _PAGE_DIRTY 0x080 /* C: page changed */ -#define _PAGE_ACCESSED 0x100 /* R: page referenced */ -#define _PAGE_EXEC 0x200 /* software: i-cache coherency required */ -#define _PAGE_RW 0x400 /* software: user write access allowed */ - -#define _PTE_NONE_MASK _PAGE_HASHPTE - -#define _PMD_PRESENT 0 -#define _PMD_PRESENT_MASK (PAGE_MASK) -#define _PMD_BAD (~PAGE_MASK) -#endif - -/* - * Some bits are only used on some cpu families... - */ -#ifndef _PAGE_HASHPTE -#define _PAGE_HASHPTE 0 -#endif -#ifndef _PTE_NONE_MASK -#define _PTE_NONE_MASK 0 -#endif -#ifndef _PAGE_SHARED -#define _PAGE_SHARED 0 -#endif -#ifndef _PAGE_HWWRITE -#define _PAGE_HWWRITE 0 -#endif -#ifndef _PAGE_HWEXEC -#define _PAGE_HWEXEC 0 -#endif -#ifndef _PAGE_EXEC -#define _PAGE_EXEC 0 -#endif -#ifndef _PMD_PRESENT_MASK -#define _PMD_PRESENT_MASK _PMD_PRESENT -#endif -#ifndef _PMD_SIZE -#define _PMD_SIZE 0 -#define PMD_PAGE_SIZE(pmd) bad_call_to_PMD_PAGE_SIZE() -#endif - -#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) - -/* - * Note: the _PAGE_COHERENT bit automatically gets set in the hardware - * PTE if CONFIG_SMP is defined (hash_page does this); there is no need - * to have it in the Linux PTE, and in fact the bit could be reused for - * another purpose. -- paulus. - */ - -#ifdef CONFIG_44x -#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_GUARDED) -#else -#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED) -#endif -#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE) -#define _PAGE_KERNEL (_PAGE_BASE | _PAGE_SHARED | _PAGE_WRENABLE) - -#ifdef CONFIG_PPC_STD_MMU -/* On standard PPC MMU, no user access implies kernel read/write access, - * so to write-protect kernel memory we must turn on user access */ -#define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED | _PAGE_USER) -#else -#define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED) -#endif - -#define _PAGE_IO (_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED) -#define _PAGE_RAM (_PAGE_KERNEL | _PAGE_HWEXEC) - -#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) -/* We want the debuggers to be able to set breakpoints anywhere, so - * don't write protect the kernel text */ -#define _PAGE_RAM_TEXT _PAGE_RAM -#else -#define _PAGE_RAM_TEXT (_PAGE_KERNEL_RO | _PAGE_HWEXEC) -#endif - -#define PAGE_NONE __pgprot(_PAGE_BASE) -#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER) -#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) -#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW) -#define PAGE_SHARED_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC) -#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER) -#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC) - -#define PAGE_KERNEL __pgprot(_PAGE_RAM) -#define PAGE_KERNEL_NOCACHE __pgprot(_PAGE_IO) - -/* - * The PowerPC can only do execute protection on a segment (256MB) basis, - * not on a page basis. So we consider execute permission the same as read. - * Also, write permissions imply read permissions. - * This is the closest we can get.. - */ -#define __P000 PAGE_NONE -#define __P001 PAGE_READONLY_X -#define __P010 PAGE_COPY -#define __P011 PAGE_COPY_X -#define __P100 PAGE_READONLY -#define __P101 PAGE_READONLY_X -#define __P110 PAGE_COPY -#define __P111 PAGE_COPY_X - -#define __S000 PAGE_NONE -#define __S001 PAGE_READONLY_X -#define __S010 PAGE_SHARED -#define __S011 PAGE_SHARED_X -#define __S100 PAGE_READONLY -#define __S101 PAGE_READONLY_X -#define __S110 PAGE_SHARED -#define __S111 PAGE_SHARED_X - -#ifndef __ASSEMBLY__ -/* Make sure we get a link error if PMD_PAGE_SIZE is ever called on a - * kernel without large page PMD support */ -extern unsigned long bad_call_to_PMD_PAGE_SIZE(void); - -/* - * Conversions between PTE values and page frame numbers. - */ - -/* in some case we want to additionaly adjust where the pfn is in the pte to - * allow room for more flags */ -#define PFN_SHIFT_OFFSET (PAGE_SHIFT) - -#define pte_pfn(x) (pte_val(x) >> PFN_SHIFT_OFFSET) -#define pte_page(x) pfn_to_page(pte_pfn(x)) - -#define pfn_pte(pfn, prot) __pte(((pte_basic_t)(pfn) << PFN_SHIFT_OFFSET) |\ - pgprot_val(prot)) -#define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot) - -/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -extern unsigned long empty_zero_page[1024]; -#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) - -#endif /* __ASSEMBLY__ */ - -#define pte_none(pte) ((pte_val(pte) & ~_PTE_NONE_MASK) == 0) -#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT) -#define pte_clear(mm,addr,ptep) do { set_pte_at((mm), (addr), (ptep), __pte(0)); } while (0) - -#define pmd_none(pmd) (!pmd_val(pmd)) -#define pmd_bad(pmd) (pmd_val(pmd) & _PMD_BAD) -#define pmd_present(pmd) (pmd_val(pmd) & _PMD_PRESENT_MASK) -#define pmd_clear(pmdp) do { pmd_val(*(pmdp)) = 0; } while (0) - -#ifndef __ASSEMBLY__ -/* - * The "pgd_xxx()" functions here are trivial for a folded two-level - * setup: the pgd is never bad, and a pmd always exists (as it's folded - * into the pgd entry) - */ -static inline int pgd_none(pgd_t pgd) { return 0; } -static inline int pgd_bad(pgd_t pgd) { return 0; } -static inline int pgd_present(pgd_t pgd) { return 1; } -#define pgd_clear(xp) do { } while (0) - -#define pgd_page_vaddr(pgd) \ - ((unsigned long) __va(pgd_val(pgd) & PAGE_MASK)) - -/* - * The following only work if pte_present() is true. - * Undefined behaviour if not.. - */ -static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; } -static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; } -static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } -static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } -static inline int pte_special(pte_t pte) { return 0; } - -static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; } -static inline void pte_cache(pte_t pte) { pte_val(pte) &= ~_PAGE_NO_CACHE; } - -static inline pte_t pte_wrprotect(pte_t pte) { - pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; } -static inline pte_t pte_mkclean(pte_t pte) { - pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; } -static inline pte_t pte_mkold(pte_t pte) { - pte_val(pte) &= ~_PAGE_ACCESSED; return pte; } - -static inline pte_t pte_mkwrite(pte_t pte) { - pte_val(pte) |= _PAGE_RW; return pte; } -static inline pte_t pte_mkdirty(pte_t pte) { - pte_val(pte) |= _PAGE_DIRTY; return pte; } -static inline pte_t pte_mkyoung(pte_t pte) { - pte_val(pte) |= _PAGE_ACCESSED; return pte; } -static inline pte_t pte_mkspecial(pte_t pte) { - return pte; } - -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ - pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); - return pte; -} - -/* - * When flushing the tlb entry for a page, we also need to flush the hash - * table entry. flush_hash_pages is assembler (for speed) in hashtable.S. - */ -extern int flush_hash_pages(unsigned context, unsigned long va, - unsigned long pmdval, int count); - -/* Add an HPTE to the hash table */ -extern void add_hash_page(unsigned context, unsigned long va, - unsigned long pmdval); - -/* - * Atomic PTE updates. - * - * pte_update clears and sets bit atomically, and returns - * the old pte value. In the 64-bit PTE case we lock around the - * low PTE word since we expect ALL flag bits to be there - */ -#ifndef CONFIG_PTE_64BIT -static inline unsigned long pte_update(pte_t *p, unsigned long clr, - unsigned long set) -{ - unsigned long old, tmp; - - __asm__ __volatile__("\ -1: lwarx %0,0,%3\n\ - andc %1,%0,%4\n\ - or %1,%1,%5\n" - PPC405_ERR77(0,%3) -" stwcx. %1,0,%3\n\ - bne- 1b" - : "=&r" (old), "=&r" (tmp), "=m" (*p) - : "r" (p), "r" (clr), "r" (set), "m" (*p) - : "cc" ); - return old; -} -#else -static inline unsigned long long pte_update(pte_t *p, unsigned long clr, - unsigned long set) -{ - unsigned long long old; - unsigned long tmp; - - __asm__ __volatile__("\ -1: lwarx %L0,0,%4\n\ - lwzx %0,0,%3\n\ - andc %1,%L0,%5\n\ - or %1,%1,%6\n" - PPC405_ERR77(0,%3) -" stwcx. %1,0,%4\n\ - bne- 1b" - : "=&r" (old), "=&r" (tmp), "=m" (*p) - : "r" (p), "r" ((unsigned long)(p) + 4), "r" (clr), "r" (set), "m" (*p) - : "cc" ); - return old; -} -#endif - -/* - * set_pte stores a linux PTE into the linux page table. - * On machines which use an MMU hash table we avoid changing the - * _PAGE_HASHPTE bit. - */ -static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pte) -{ -#if _PAGE_HASHPTE != 0 - pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte) & ~_PAGE_HASHPTE); -#else - *ptep = pte; -#endif -} - -/* - * 2.6 calles this without flushing the TLB entry, this is wrong - * for our hash-based implementation, we fix that up here - */ -#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG -static inline int __ptep_test_and_clear_young(unsigned int context, unsigned long addr, pte_t *ptep) -{ - unsigned long old; - old = pte_update(ptep, _PAGE_ACCESSED, 0); -#if _PAGE_HASHPTE != 0 - if (old & _PAGE_HASHPTE) { - unsigned long ptephys = __pa(ptep) & PAGE_MASK; - flush_hash_pages(context, addr, ptephys, 1); - } -#endif - return (old & _PAGE_ACCESSED) != 0; -} -#define ptep_test_and_clear_young(__vma, __addr, __ptep) \ - __ptep_test_and_clear_young((__vma)->vm_mm->context.id, __addr, __ptep) - -#define __HAVE_ARCH_PTEP_GET_AND_CLEAR -static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, - pte_t *ptep) -{ - return __pte(pte_update(ptep, ~_PAGE_HASHPTE, 0)); -} - -#define __HAVE_ARCH_PTEP_SET_WRPROTECT -static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, - pte_t *ptep) -{ - pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0); -} - -#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS -static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty) -{ - unsigned long bits = pte_val(entry) & - (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW); - pte_update(ptep, 0, bits); -} - -#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \ -({ \ - int __changed = !pte_same(*(__ptep), __entry); \ - if (__changed) { \ - __ptep_set_access_flags(__ptep, __entry, __dirty); \ - flush_tlb_page_nohash(__vma, __address); \ - } \ - __changed; \ -}) - -/* - * Macro to mark a page protection value as "uncacheable". - */ -#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED)) - -struct file; -extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, - unsigned long size, pgprot_t vma_prot); -#define __HAVE_PHYS_MEM_ACCESS_PROT - -#define __HAVE_ARCH_PTE_SAME -#define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0) - -/* - * Note that on Book E processors, the pmd contains the kernel virtual - * (lowmem) address of the pte page. The physical address is less useful - * because everything runs with translation enabled (even the TLB miss - * handler). On everything else the pmd contains the physical address - * of the pte page. -- paulus - */ -#ifndef CONFIG_BOOKE -#define pmd_page_vaddr(pmd) \ - ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK)) -#define pmd_page(pmd) \ - (mem_map + (pmd_val(pmd) >> PAGE_SHIFT)) -#else -#define pmd_page_vaddr(pmd) \ - ((unsigned long) (pmd_val(pmd) & PAGE_MASK)) -#define pmd_page(pmd) \ - (mem_map + (__pa(pmd_val(pmd)) >> PAGE_SHIFT)) -#endif - -/* to find an entry in a kernel page-table-directory */ -#define pgd_offset_k(address) pgd_offset(&init_mm, address) - -/* to find an entry in a page-table-directory */ -#define pgd_index(address) ((address) >> PGDIR_SHIFT) -#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) - -/* Find an entry in the second-level page table.. */ -static inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address) -{ - return (pmd_t *) dir; -} - -/* Find an entry in the third-level page table.. */ -#define pte_index(address) \ - (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) -#define pte_offset_kernel(dir, addr) \ - ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(addr)) -#define pte_offset_map(dir, addr) \ - ((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE0) + pte_index(addr)) -#define pte_offset_map_nested(dir, addr) \ - ((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE1) + pte_index(addr)) - -#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0) -#define pte_unmap_nested(pte) kunmap_atomic(pte, KM_PTE1) - -extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; - -extern void paging_init(void); - -/* - * Encode and decode a swap entry. - * Note that the bits we use in a PTE for representing a swap entry - * must not include the _PAGE_PRESENT bit, the _PAGE_FILE bit, or the - *_PAGE_HASHPTE bit (if used). -- paulus - */ -#define __swp_type(entry) ((entry).val & 0x1f) -#define __swp_offset(entry) ((entry).val >> 5) -#define __swp_entry(type, offset) ((swp_entry_t) { (type) | ((offset) << 5) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 3 }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 3 }) - -/* Encode and decode a nonlinear file mapping entry */ -#define PTE_FILE_MAX_BITS 29 -#define pte_to_pgoff(pte) (pte_val(pte) >> 3) -#define pgoff_to_pte(off) ((pte_t) { ((off) << 3) | _PAGE_FILE }) - -/* Values for nocacheflag and cmode */ -/* These are not used by the APUS kernel_map, but prevents - compilation errors. */ -#define KERNELMAP_FULL_CACHING 0 -#define KERNELMAP_NOCACHE_SER 1 -#define KERNELMAP_NOCACHE_NONSER 2 -#define KERNELMAP_NO_COPYBACK 3 - -/* - * Map some physical address range into the kernel address space. - */ -extern unsigned long kernel_map(unsigned long paddr, unsigned long size, - int nocacheflag, unsigned long *memavailp ); - -/* - * Set cache mode of (kernel space) address range. - */ -extern void kernel_set_cachemode (unsigned long address, unsigned long size, - unsigned int cmode); - -/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ -#define kern_addr_valid(addr) (1) - -#ifdef CONFIG_PHYS_64BIT -extern int remap_pfn_range(struct vm_area_struct *vma, unsigned long from, - unsigned long paddr, unsigned long size, pgprot_t prot); - -static inline int io_remap_pfn_range(struct vm_area_struct *vma, - unsigned long vaddr, - unsigned long pfn, - unsigned long size, - pgprot_t prot) -{ - phys_addr_t paddr64 = fixup_bigphys_addr(pfn << PAGE_SHIFT, size); - return remap_pfn_range(vma, vaddr, paddr64 >> PAGE_SHIFT, size, prot); -} -#else -#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ - remap_pfn_range(vma, vaddr, pfn, size, prot) -#endif - -/* - * No page table caches to initialise - */ -#define pgtable_cache_init() do { } while (0) - -extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep, - pmd_t **pmdp); - -#include <asm-generic/pgtable.h> - -#endif /* !__ASSEMBLY__ */ - -#endif /* _PPC_PGTABLE_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/pnp.h b/include/asm-ppc/pnp.h deleted file mode 100644 index 6f6760b30dd8..000000000000 --- a/include/asm-ppc/pnp.h +++ /dev/null @@ -1,645 +0,0 @@ -#ifdef __KERNEL__ -/* 11/02/95 */ -/*----------------------------------------------------------------------------*/ -/* Plug and Play header definitions */ -/*----------------------------------------------------------------------------*/ - -/* Structure map for PnP on PowerPC Reference Platform */ -/* See Plug and Play ISA Specification, Version 1.0, May 28, 1993. It */ -/* (or later versions) is available on Compuserve in the PLUGPLAY area. */ -/* This code has extensions to that specification, namely new short and */ -/* long tag types for platform dependent information */ - -/* Warning: LE notation used throughout this file */ - -/* For enum's: if given in hex then they are bit significant, i.e. */ -/* only one bit is on for each enum */ - -#ifndef _PNP_ -#define _PNP_ - -#ifndef __ASSEMBLY__ -#define MAX_MEM_REGISTERS 9 -#define MAX_IO_PORTS 20 -#define MAX_IRQS 7 -/*#define MAX_DMA_CHANNELS 7*/ - -/* Interrupt controllers */ - -#define PNPinterrupt0 "PNP0000" /* AT Interrupt Controller */ -#define PNPinterrupt1 "PNP0001" /* EISA Interrupt Controller */ -#define PNPinterrupt2 "PNP0002" /* MCA Interrupt Controller */ -#define PNPinterrupt3 "PNP0003" /* APIC */ -#define PNPExtInt "IBM000D" /* PowerPC Extended Interrupt Controller */ - -/* Timers */ - -#define PNPtimer0 "PNP0100" /* AT Timer */ -#define PNPtimer1 "PNP0101" /* EISA Timer */ -#define PNPtimer2 "PNP0102" /* MCA Timer */ - -/* DMA controllers */ - -#define PNPdma0 "PNP0200" /* AT DMA Controller */ -#define PNPdma1 "PNP0201" /* EISA DMA Controller */ -#define PNPdma2 "PNP0202" /* MCA DMA Controller */ - -/* start of August 15, 1994 additions */ -/* CMOS */ -#define PNPCMOS "IBM0009" /* CMOS */ - -/* L2 Cache */ -#define PNPL2 "IBM0007" /* L2 Cache */ - -/* NVRAM */ -#define PNPNVRAM "IBM0008" /* NVRAM */ - -/* Power Management */ -#define PNPPM "IBM0005" /* Power Management */ -/* end of August 15, 1994 additions */ - -/* Keyboards */ - -#define PNPkeyboard0 "PNP0300" /* IBM PC/XT KB Cntlr (83 key, no mouse) */ -#define PNPkeyboard1 "PNP0301" /* Olivetti ICO (102 key) */ -#define PNPkeyboard2 "PNP0302" /* IBM PC/AT KB Cntlr (84 key) */ -#define PNPkeyboard3 "PNP0303" /* IBM Enhanced (101/2 key, PS/2 mouse) */ -#define PNPkeyboard4 "PNP0304" /* Nokia 1050 KB Cntlr */ -#define PNPkeyboard5 "PNP0305" /* Nokia 9140 KB Cntlr */ -#define PNPkeyboard6 "PNP0306" /* Standard Japanese KB Cntlr */ -#define PNPkeyboard7 "PNP0307" /* Microsoft Windows (R) KB Cntlr */ - -/* Parallel port controllers */ - -#define PNPparallel0 "PNP0400" /* Standard LPT Parallel Port */ -#define PNPparallel1 "PNP0401" /* ECP Parallel Port */ -#define PNPepp "IBM001C" /* EPP Parallel Port */ - -/* Serial port controllers */ - -#define PNPserial0 "PNP0500" /* Standard PC Serial port */ -#define PNPSerial1 "PNP0501" /* 16550A Compatible Serial port */ - -/* Disk controllers */ - -#define PNPdisk0 "PNP0600" /* Generic ESDI/IDE/ATA Compat HD Cntlr */ -#define PNPdisk1 "PNP0601" /* Plus Hardcard II */ -#define PNPdisk2 "PNP0602" /* Plus Hardcard IIXL/EZ */ - -/* Diskette controllers */ - -#define PNPdiskette0 "PNP0700" /* PC Standard Floppy Disk Controller */ - -/* Display controllers */ - -#define PNPdisplay0 "PNP0900" /* VGA Compatible */ -#define PNPdisplay1 "PNP0901" /* Video Seven VGA */ -#define PNPdisplay2 "PNP0902" /* 8514/A Compatible */ -#define PNPdisplay3 "PNP0903" /* Trident VGA */ -#define PNPdisplay4 "PNP0904" /* Cirrus Logic Laptop VGA */ -#define PNPdisplay5 "PNP0905" /* Cirrus Logic VGA */ -#define PNPdisplay6 "PNP0906" /* Tseng ET4000 or ET4000/W32 */ -#define PNPdisplay7 "PNP0907" /* Western Digital VGA */ -#define PNPdisplay8 "PNP0908" /* Western Digital Laptop VGA */ -#define PNPdisplay9 "PNP0909" /* S3 */ -#define PNPdisplayA "PNP090A" /* ATI Ultra Pro/Plus (Mach 32) */ -#define PNPdisplayB "PNP090B" /* ATI Ultra (Mach 8) */ -#define PNPdisplayC "PNP090C" /* XGA Compatible */ -#define PNPdisplayD "PNP090D" /* ATI VGA Wonder */ -#define PNPdisplayE "PNP090E" /* Weitek P9000 Graphics Adapter */ -#define PNPdisplayF "PNP090F" /* Oak Technology VGA */ - -/* Peripheral busses */ - -#define PNPbuses0 "PNP0A00" /* ISA Bus */ -#define PNPbuses1 "PNP0A01" /* EISA Bus */ -#define PNPbuses2 "PNP0A02" /* MCA Bus */ -#define PNPbuses3 "PNP0A03" /* PCI Bus */ -#define PNPbuses4 "PNP0A04" /* VESA/VL Bus */ - -/* RTC, BIOS, planar devices */ - -#define PNPspeaker0 "PNP0800" /* AT Style Speaker Sound */ -#define PNPrtc0 "PNP0B00" /* AT RTC */ -#define PNPpnpbios0 "PNP0C00" /* PNP BIOS (only created by root enum) */ -#define PNPpnpbios1 "PNP0C01" /* System Board Memory Device */ -#define PNPpnpbios2 "PNP0C02" /* Math Coprocessor */ -#define PNPpnpbios3 "PNP0C03" /* PNP BIOS Event Notification Interrupt */ - -/* PCMCIA controller */ - -#define PNPpcmcia0 "PNP0E00" /* Intel 82365 Compatible PCMCIA Cntlr */ - -/* Mice */ - -#define PNPmouse0 "PNP0F00" /* Microsoft Bus Mouse */ -#define PNPmouse1 "PNP0F01" /* Microsoft Serial Mouse */ -#define PNPmouse2 "PNP0F02" /* Microsoft Inport Mouse */ -#define PNPmouse3 "PNP0F03" /* Microsoft PS/2 Mouse */ -#define PNPmouse4 "PNP0F04" /* Mousesystems Mouse */ -#define PNPmouse5 "PNP0F05" /* Mousesystems 3 Button Mouse - COM2 */ -#define PNPmouse6 "PNP0F06" /* Genius Mouse - COM1 */ -#define PNPmouse7 "PNP0F07" /* Genius Mouse - COM2 */ -#define PNPmouse8 "PNP0F08" /* Logitech Serial Mouse */ -#define PNPmouse9 "PNP0F09" /* Microsoft Ballpoint Serial Mouse */ -#define PNPmouseA "PNP0F0A" /* Microsoft PNP Mouse */ -#define PNPmouseB "PNP0F0B" /* Microsoft PNP Ballpoint Mouse */ - -/* Modems */ - -#define PNPmodem0 "PNP9000" /* Specific IDs TBD */ - -/* Network controllers */ - -#define PNPnetworkC9 "PNP80C9" /* IBM Token Ring */ -#define PNPnetworkCA "PNP80CA" /* IBM Token Ring II */ -#define PNPnetworkCB "PNP80CB" /* IBM Token Ring II/Short */ -#define PNPnetworkCC "PNP80CC" /* IBM Token Ring 4/16Mbs */ -#define PNPnetwork27 "PNP8327" /* IBM Token Ring (All types) */ -#define PNPnetworket "IBM0010" /* IBM Ethernet used by Power PC */ -#define PNPneteisaet "IBM2001" /* IBM Ethernet EISA adapter */ -#define PNPAMD79C970 "IBM0016" /* AMD 79C970 (PCI Ethernet) */ - -/* SCSI controllers */ - -#define PNPscsi0 "PNPA000" /* Adaptec 154x Compatible SCSI Cntlr */ -#define PNPscsi1 "PNPA001" /* Adaptec 174x Compatible SCSI Cntlr */ -#define PNPscsi2 "PNPA002" /* Future Domain 16-700 Compat SCSI Cntlr*/ -#define PNPscsi3 "PNPA003" /* Panasonic CDROM Adapter (SBPro/SB16) */ -#define PNPscsiF "IBM000F" /* NCR 810 SCSI Controller */ -#define PNPscsi825 "IBM001B" /* NCR 825 SCSI Controller */ -#define PNPscsi875 "IBM0018" /* NCR 875 SCSI Controller */ - -/* Sound/Video, Multimedia */ - -#define PNPmm0 "PNPB000" /* Sound Blaster Compatible Sound Device */ -#define PNPmm1 "PNPB001" /* MS Windows Sound System Compat Device */ -#define PNPmmF "IBM000E" /* Crystal CS4231 Audio Device */ -#define PNPv7310 "IBM0015" /* ASCII V7310 Video Capture Device */ -#define PNPmm4232 "IBM0017" /* Crystal CS4232 Audio Device */ -#define PNPpmsyn "IBM001D" /* YMF 289B chip (Yamaha) */ -#define PNPgp4232 "IBM0012" /* Crystal CS4232 Game Port */ -#define PNPmidi4232 "IBM0013" /* Crystal CS4232 MIDI */ - -/* Operator Panel */ -#define PNPopctl "IBM000B" /* Operator's panel */ - -/* Service Processor */ -#define PNPsp "IBM0011" /* IBM Service Processor */ -#define PNPLTsp "IBM001E" /* Lightning/Terlingua Support Processor */ -#define PNPLTmsp "IBM001F" /* Lightning/Terlingua Mini-SP */ - -/* Memory Controller */ -#define PNPmemctl "IBM000A" /* Memory controller */ - -/* Graphics Assist */ -#define PNPg_assist "IBM0014" /* Graphics Assist */ - -/* Miscellaneous Device Controllers */ -#define PNPtablet "IBM0019" /* IBM Tablet Controller */ - -/* PNP Packet Handles */ - -#define S1_Packet 0x0A /* Version resource */ -#define S2_Packet 0x15 /* Logical DEVID (without flags) */ -#define S2_Packet_flags 0x16 /* Logical DEVID (with flags) */ -#define S3_Packet 0x1C /* Compatible device ID */ -#define S4_Packet 0x22 /* IRQ resource (without flags) */ -#define S4_Packet_flags 0x23 /* IRQ resource (with flags) */ -#define S5_Packet 0x2A /* DMA resource */ -#define S6_Packet 0x30 /* Depend funct start (w/o priority) */ -#define S6_Packet_priority 0x31 /* Depend funct start (w/ priority) */ -#define S7_Packet 0x38 /* Depend funct end */ -#define S8_Packet 0x47 /* I/O port resource (w/o fixed loc) */ -#define S9_Packet_fixed 0x4B /* I/O port resource (w/ fixed loc) */ -#define S14_Packet 0x71 /* Vendor defined */ -#define S15_Packet 0x78 /* End of resource (w/o checksum) */ -#define S15_Packet_checksum 0x79 /* End of resource (w/ checksum) */ -#define L1_Packet 0x81 /* Memory range */ -#define L1_Shadow 0x20 /* Memory is shadowable */ -#define L1_32bit_mem 0x18 /* 32-bit memory only */ -#define L1_8_16bit_mem 0x10 /* 8- and 16-bit supported */ -#define L1_Decode_Hi 0x04 /* decode supports high address */ -#define L1_Cache 0x02 /* read cacheable, write-through */ -#define L1_Writeable 0x01 /* Memory is writeable */ -#define L2_Packet 0x82 /* ANSI ID string */ -#define L3_Packet 0x83 /* Unicode ID string */ -#define L4_Packet 0x84 /* Vendor defined */ -#define L5_Packet 0x85 /* Large I/O */ -#define L6_Packet 0x86 /* 32-bit Fixed Loc Mem Range Desc */ -#define END_TAG 0x78 /* End of resource */ -#define DF_START_TAG 0x30 /* Dependent function start */ -#define DF_START_TAG_priority 0x31 /* Dependent function start */ -#define DF_END_TAG 0x38 /* Dependent function end */ -#define SUBOPTIMAL_CONFIGURATION 0x2 /* Priority byte sub optimal config */ - -/* Device Base Type Codes */ - -typedef enum _PnP_BASE_TYPE { - Reserved = 0, - MassStorageDevice = 1, - NetworkInterfaceController = 2, - DisplayController = 3, - MultimediaController = 4, - MemoryController = 5, - BridgeController = 6, - CommunicationsDevice = 7, - SystemPeripheral = 8, - InputDevice = 9, - ServiceProcessor = 0x0A, /* 11/2/95 */ - } PnP_BASE_TYPE; - -/* Device Sub Type Codes */ - -typedef enum _PnP_SUB_TYPE { - SCSIController = 0, - IDEController = 1, - FloppyController = 2, - IPIController = 3, - OtherMassStorageController = 0x80, - - EthernetController = 0, - TokenRingController = 1, - FDDIController = 2, - OtherNetworkController = 0x80, - - VGAController= 0, - SVGAController= 1, - XGAController= 2, - OtherDisplayController = 0x80, - - VideoController = 0, - AudioController = 1, - OtherMultimediaController = 0x80, - - RAM = 0, - FLASH = 1, - OtherMemoryDevice = 0x80, - - HostProcessorBridge = 0, - ISABridge = 1, - EISABridge = 2, - MicroChannelBridge = 3, - PCIBridge = 4, - PCMCIABridge = 5, - VMEBridge = 6, - OtherBridgeDevice = 0x80, - - RS232Device = 0, - ATCompatibleParallelPort = 1, - OtherCommunicationsDevice = 0x80, - - ProgrammableInterruptController = 0, - DMAController = 1, - SystemTimer = 2, - RealTimeClock = 3, - L2Cache = 4, - NVRAM = 5, - PowerManagement = 6, - CMOS = 7, - OperatorPanel = 8, - ServiceProcessorClass1 = 9, - ServiceProcessorClass2 = 0xA, - ServiceProcessorClass3 = 0xB, - GraphicAssist = 0xC, - SystemPlanar = 0xF, /* 10/5/95 */ - OtherSystemPeripheral = 0x80, - - KeyboardController = 0, - Digitizer = 1, - MouseController = 2, - TabletController = 3, /* 10/27/95 */ - OtherInputController = 0x80, - - GeneralMemoryController = 0, - } PnP_SUB_TYPE; - -/* Device Interface Type Codes */ - -typedef enum _PnP_INTERFACE { - General = 0, - GeneralSCSI = 0, - GeneralIDE = 0, - ATACompatible = 1, - - GeneralFloppy = 0, - Compatible765 = 1, - NS398_Floppy = 2, /* NS Super I/O wired to use index - register at port 398 and data - register at port 399 */ - NS26E_Floppy = 3, /* Ports 26E and 26F */ - NS15C_Floppy = 4, /* Ports 15C and 15D */ - NS2E_Floppy = 5, /* Ports 2E and 2F */ - CHRP_Floppy = 6, /* CHRP Floppy in PR*P system */ - - GeneralIPI = 0, - - GeneralEther = 0, - GeneralToken = 0, - GeneralFDDI = 0, - - GeneralVGA = 0, - GeneralSVGA = 0, - GeneralXGA = 0, - - GeneralVideo = 0, - GeneralAudio = 0, - CS4232Audio = 1, /* CS 4232 Plug 'n Play Configured */ - - GeneralRAM = 0, - GeneralFLASH = 0, - PCIMemoryController = 0, /* PCI Config Method */ - RS6KMemoryController = 1, /* RS6K Config Method */ - - GeneralHostBridge = 0, - GeneralISABridge = 0, - GeneralEISABridge = 0, - GeneralMCABridge = 0, - GeneralPCIBridge = 0, - PCIBridgeDirect = 0, - PCIBridgeIndirect = 1, - PCIBridgeRS6K = 2, - GeneralPCMCIABridge = 0, - GeneralVMEBridge = 0, - - GeneralRS232 = 0, - COMx = 1, - Compatible16450 = 2, - Compatible16550 = 3, - NS398SerPort = 4, /* NS Super I/O wired to use index - register at port 398 and data - register at port 399 */ - NS26ESerPort = 5, /* Ports 26E and 26F */ - NS15CSerPort = 6, /* Ports 15C and 15D */ - NS2ESerPort = 7, /* Ports 2E and 2F */ - - GeneralParPort = 0, - LPTx = 1, - NS398ParPort = 2, /* NS Super I/O wired to use index - register at port 398 and data - register at port 399 */ - NS26EParPort = 3, /* Ports 26E and 26F */ - NS15CParPort = 4, /* Ports 15C and 15D */ - NS2EParPort = 5, /* Ports 2E and 2F */ - - GeneralPIC = 0, - ISA_PIC = 1, - EISA_PIC = 2, - MPIC = 3, - RS6K_PIC = 4, - - GeneralDMA = 0, - ISA_DMA = 1, - EISA_DMA = 2, - - GeneralTimer = 0, - ISA_Timer = 1, - EISA_Timer = 2, - GeneralRTC = 0, - ISA_RTC = 1, - - StoreThruOnly = 1, - StoreInEnabled = 2, - RS6KL2Cache = 3, - - IndirectNVRAM = 0, /* Indirectly addressed */ - DirectNVRAM = 1, /* Memory Mapped */ - IndirectNVRAM24 = 2, /* Indirectly addressed - 24 bit */ - - GeneralPowerManagement = 0, - EPOWPowerManagement = 1, - PowerControl = 2, // d1378 - - GeneralCMOS = 0, - - GeneralOPPanel = 0, - HarddiskLight = 1, - CDROMLight = 2, - PowerLight = 3, - KeyLock = 4, - ANDisplay = 5, /* AlphaNumeric Display */ - SystemStatusLED = 6, /* 3 digit 7 segment LED */ - CHRP_SystemStatusLED = 7, /* CHRP LEDs in PR*P system */ - - GeneralServiceProcessor = 0, - - TransferData = 1, - IGMC32 = 2, - IGMC64 = 3, - - GeneralSystemPlanar = 0, /* 10/5/95 */ - - } PnP_INTERFACE; - -/* PnP resources */ - -/* Compressed ASCII is 5 bits per char; 00001=A ... 11010=Z */ - -typedef struct _SERIAL_ID { - unsigned char VendorID0; /* Bit(7)=0 */ - /* Bits(6:2)=1st character in */ - /* compressed ASCII */ - /* Bits(1:0)=2nd character in */ - /* compressed ASCII bits(4:3) */ - unsigned char VendorID1; /* Bits(7:5)=2nd character in */ - /* compressed ASCII bits(2:0) */ - /* Bits(4:0)=3rd character in */ - /* compressed ASCII */ - unsigned char VendorID2; /* Product number - vendor assigned */ - unsigned char VendorID3; /* Product number - vendor assigned */ - -/* Serial number is to provide uniqueness if more than one board of same */ -/* type is in system. Must be "FFFFFFFF" if feature not supported. */ - - unsigned char Serial0; /* Unique serial number bits (7:0) */ - unsigned char Serial1; /* Unique serial number bits (15:8) */ - unsigned char Serial2; /* Unique serial number bits (23:16) */ - unsigned char Serial3; /* Unique serial number bits (31:24) */ - unsigned char Checksum; - } SERIAL_ID; - -typedef enum _PnPItemName { - Unused = 0, - PnPVersion = 1, - LogicalDevice = 2, - CompatibleDevice = 3, - IRQFormat = 4, - DMAFormat = 5, - StartDepFunc = 6, - EndDepFunc = 7, - IOPort = 8, - FixedIOPort = 9, - Res1 = 10, - Res2 = 11, - Res3 = 12, - SmallVendorItem = 14, - EndTag = 15, - MemoryRange = 1, - ANSIIdentifier = 2, - UnicodeIdentifier = 3, - LargeVendorItem = 4, - MemoryRange32 = 5, - MemoryRangeFixed32 = 6, - } PnPItemName; - -/* Define a bunch of access functions for the bits in the tag field */ - -/* Tag type - 0 = small; 1 = large */ -#define tag_type(t) (((t) & 0x80)>>7) -#define set_tag_type(t,v) (t = (t & 0x7f) | ((v)<<7)) - -/* Small item name is 4 bits - one of PnPItemName enum above */ -#define tag_small_item_name(t) (((t) & 0x78)>>3) -#define set_tag_small_item_name(t,v) (t = (t & 0x07) | ((v)<<3)) - -/* Small item count is 3 bits - count of further bytes in packet */ -#define tag_small_count(t) ((t) & 0x07) -#define set_tag_count(t,v) (t = (t & 0x78) | (v)) - -/* Large item name is 7 bits - one of PnPItemName enum above */ -#define tag_large_item_name(t) ((t) & 0x7f) -#define set_tag_large_item_name(t,v) (t = (t | 0x80) | (v)) - -/* a PnP resource is a bunch of contiguous TAG packets ending with an end tag */ - -typedef union _PnP_TAG_PACKET { - struct _S1_Pack{ /* VERSION PACKET */ - unsigned char Tag; /* small tag = 0x0a */ - unsigned char Version[2]; /* PnP version, Vendor version */ - } S1_Pack; - - struct _S2_Pack{ /* LOGICAL DEVICE ID PACKET */ - unsigned char Tag; /* small tag = 0x15 or 0x16 */ - unsigned char DevId[4]; /* Logical device id */ - unsigned char Flags[2]; /* bit(0) boot device; */ - /* bit(7:1) cmd in range x31-x37 */ - /* bit(7:0) cmd in range x28-x3f (opt)*/ - } S2_Pack; - - struct _S3_Pack{ /* COMPATIBLE DEVICE ID PACKET */ - unsigned char Tag; /* small tag = 0x1c */ - unsigned char CompatId[4]; /* Compatible device id */ - } S3_Pack; - - struct _S4_Pack{ /* IRQ PACKET */ - unsigned char Tag; /* small tag = 0x22 or 0x23 */ - unsigned char IRQMask[2]; /* bit(0) is IRQ0, ...; */ - /* bit(0) is IRQ8 ... */ - unsigned char IRQInfo; /* optional; assume bit(0)=1; else */ - /* bit(0) - high true edge sensitive */ - /* bit(1) - low true edge sensitive */ - /* bit(2) - high true level sensitive*/ - /* bit(3) - low true level sensitive */ - /* bit(7:4) - must be 0 */ - } S4_Pack; - - struct _S5_Pack{ /* DMA PACKET */ - unsigned char Tag; /* small tag = 0x2a */ - unsigned char DMAMask; /* bit(0) is channel 0 ... */ - unsigned char DMAInfo; - } S5_Pack; - - struct _S6_Pack{ /* START DEPENDENT FUNCTION PACKET */ - unsigned char Tag; /* small tag = 0x30 or 0x31 */ - unsigned char Priority; /* Optional; if missing then x01; else*/ - /* x00 = best possible */ - /* x01 = acceptible */ - /* x02 = sub-optimal but functional */ - } S6_Pack; - - struct _S7_Pack{ /* END DEPENDENT FUNCTION PACKET */ - unsigned char Tag; /* small tag = 0x38 */ - } S7_Pack; - - struct _S8_Pack{ /* VARIABLE I/O PORT PACKET */ - unsigned char Tag; /* small tag x47 */ - unsigned char IOInfo; /* x0 = decode only bits(9:0); */ -#define ISAAddr16bit 0x01 /* x01 = decode bits(15:0) */ - unsigned char RangeMin[2]; /* Min base address */ - unsigned char RangeMax[2]; /* Max base address */ - unsigned char IOAlign; /* base alignmt, incr in 1B blocks */ - unsigned char IONum; /* number of contiguous I/O ports */ - } S8_Pack; - - struct _S9_Pack{ /* FIXED I/O PORT PACKET */ - unsigned char Tag; /* small tag = 0x4b */ - unsigned char Range[2]; /* base address 10 bits */ - unsigned char IONum; /* number of contiguous I/O ports */ - } S9_Pack; - - struct _S14_Pack{ /* VENDOR DEFINED PACKET */ - unsigned char Tag; /* small tag = 0x7m m = 1-7 */ - union _S14_Data{ - unsigned char Data[7]; /* Vendor defined */ - struct _S14_PPCPack{ /* Pr*p s14 pack */ - unsigned char Type; /* 00=non-IBM */ - unsigned char PPCData[6]; /* Vendor defined */ - } S14_PPCPack; - } S14_Data; - } S14_Pack; - - struct _S15_Pack{ /* END PACKET */ - unsigned char Tag; /* small tag = 0x78 or 0x79 */ - unsigned char Check; /* optional - checksum */ - } S15_Pack; - - struct _L1_Pack{ /* MEMORY RANGE PACKET */ - unsigned char Tag; /* large tag = 0x81 */ - unsigned char Count0; /* x09 */ - unsigned char Count1; /* x00 */ - unsigned char Data[9]; /* a variable array of bytes, */ - /* count in tag */ - } L1_Pack; - - struct _L2_Pack{ /* ANSI ID STRING PACKET */ - unsigned char Tag; /* large tag = 0x82 */ - unsigned char Count0; /* Length of string */ - unsigned char Count1; - unsigned char Identifier[1]; /* a variable array of bytes, */ - /* count in tag */ - } L2_Pack; - - struct _L3_Pack{ /* UNICODE ID STRING PACKET */ - unsigned char Tag; /* large tag = 0x83 */ - unsigned char Count0; /* Length + 2 of string */ - unsigned char Count1; - unsigned char Country0; /* TBD */ - unsigned char Country1; /* TBD */ - unsigned char Identifier[1]; /* a variable array of bytes, */ - /* count in tag */ - } L3_Pack; - - struct _L4_Pack{ /* VENDOR DEFINED PACKET */ - unsigned char Tag; /* large tag = 0x84 */ - unsigned char Count0; - unsigned char Count1; - union _L4_Data{ - unsigned char Data[1]; /* a variable array of bytes, */ - /* count in tag */ - struct _L4_PPCPack{ /* Pr*p L4 packet */ - unsigned char Type; /* 00=non-IBM */ - unsigned char PPCData[1]; /* a variable array of bytes, */ - /* count in tag */ - } L4_PPCPack; - } L4_Data; - } L4_Pack; - - struct _L5_Pack{ - unsigned char Tag; /* large tag = 0x85 */ - unsigned char Count0; /* Count = 17 */ - unsigned char Count1; - unsigned char Data[17]; - } L5_Pack; - - struct _L6_Pack{ - unsigned char Tag; /* large tag = 0x86 */ - unsigned char Count0; /* Count = 9 */ - unsigned char Count1; - unsigned char Data[9]; - } L6_Pack; - - } PnP_TAG_PACKET; - -#endif /* __ASSEMBLY__ */ -#endif /* ndef _PNP_ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/ppc4xx_dma.h b/include/asm-ppc/ppc4xx_dma.h deleted file mode 100644 index 935d1e05366b..000000000000 --- a/include/asm-ppc/ppc4xx_dma.h +++ /dev/null @@ -1,579 +0,0 @@ -/* - * include/asm-ppc/ppc4xx_dma.h - * - * IBM PPC4xx DMA engine library - * - * Copyright 2000-2004 MontaVista Software Inc. - * - * Cleaned up a bit more, Matt Porter <mporter@kernel.crashing.org> - * - * Original code by Armin Kuster <akuster@mvista.com> - * and Pete Popov <ppopov@mvista.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifdef __KERNEL__ -#ifndef __ASMPPC_PPC4xx_DMA_H -#define __ASMPPC_PPC4xx_DMA_H - -#include <linux/types.h> -#include <asm/mmu.h> -#include <asm/ibm4xx.h> - -#undef DEBUG_4xxDMA - -#define MAX_PPC4xx_DMA_CHANNELS 4 - -/* - * Function return status codes - * These values are used to indicate whether or not the function - * call was successful, or a bad/invalid parameter was passed. - */ -#define DMA_STATUS_GOOD 0 -#define DMA_STATUS_BAD_CHANNEL 1 -#define DMA_STATUS_BAD_HANDLE 2 -#define DMA_STATUS_BAD_MODE 3 -#define DMA_STATUS_NULL_POINTER 4 -#define DMA_STATUS_OUT_OF_MEMORY 5 -#define DMA_STATUS_SGL_LIST_EMPTY 6 -#define DMA_STATUS_GENERAL_ERROR 7 -#define DMA_STATUS_CHANNEL_NOTFREE 8 - -#define DMA_CHANNEL_BUSY 0x80000000 - -/* - * These indicate status as returned from the DMA Status Register. - */ -#define DMA_STATUS_NO_ERROR 0 -#define DMA_STATUS_CS 1 /* Count Status */ -#define DMA_STATUS_TS 2 /* Transfer Status */ -#define DMA_STATUS_DMA_ERROR 3 /* DMA Error Occurred */ -#define DMA_STATUS_DMA_BUSY 4 /* The channel is busy */ - - -/* - * DMA Channel Control Registers - */ - -#ifdef CONFIG_44x -#define PPC4xx_DMA_64BIT -#define DMA_CR_OFFSET 1 -#else -#define DMA_CR_OFFSET 0 -#endif - -#define DMA_CE_ENABLE (1<<31) /* DMA Channel Enable */ -#define SET_DMA_CE_ENABLE(x) (((x)&0x1)<<31) -#define GET_DMA_CE_ENABLE(x) (((x)&DMA_CE_ENABLE)>>31) - -#define DMA_CIE_ENABLE (1<<30) /* DMA Channel Interrupt Enable */ -#define SET_DMA_CIE_ENABLE(x) (((x)&0x1)<<30) -#define GET_DMA_CIE_ENABLE(x) (((x)&DMA_CIE_ENABLE)>>30) - -#define DMA_TD (1<<29) -#define SET_DMA_TD(x) (((x)&0x1)<<29) -#define GET_DMA_TD(x) (((x)&DMA_TD)>>29) - -#define DMA_PL (1<<28) /* Peripheral Location */ -#define SET_DMA_PL(x) (((x)&0x1)<<28) -#define GET_DMA_PL(x) (((x)&DMA_PL)>>28) - -#define EXTERNAL_PERIPHERAL 0 -#define INTERNAL_PERIPHERAL 1 - -#define SET_DMA_PW(x) (((x)&0x3)<<(26-DMA_CR_OFFSET)) /* Peripheral Width */ -#define DMA_PW_MASK SET_DMA_PW(3) -#define PW_8 0 -#define PW_16 1 -#define PW_32 2 -#define PW_64 3 -/* FIXME: Add PW_128 support for 440GP DMA block */ -#define GET_DMA_PW(x) (((x)&DMA_PW_MASK)>>(26-DMA_CR_OFFSET)) - -#define DMA_DAI (1<<(25-DMA_CR_OFFSET)) /* Destination Address Increment */ -#define SET_DMA_DAI(x) (((x)&0x1)<<(25-DMA_CR_OFFSET)) - -#define DMA_SAI (1<<(24-DMA_CR_OFFSET)) /* Source Address Increment */ -#define SET_DMA_SAI(x) (((x)&0x1)<<(24-DMA_CR_OFFSET)) - -#define DMA_BEN (1<<(23-DMA_CR_OFFSET)) /* Buffer Enable */ -#define SET_DMA_BEN(x) (((x)&0x1)<<(23-DMA_CR_OFFSET)) - -#define SET_DMA_TM(x) (((x)&0x3)<<(21-DMA_CR_OFFSET)) /* Transfer Mode */ -#define DMA_TM_MASK SET_DMA_TM(3) -#define TM_PERIPHERAL 0 /* Peripheral */ -#define TM_RESERVED 1 /* Reserved */ -#define TM_S_MM 2 /* Memory to Memory */ -#define TM_D_MM 3 /* Device Paced Memory to Memory */ -#define GET_DMA_TM(x) (((x)&DMA_TM_MASK)>>(21-DMA_CR_OFFSET)) - -#define SET_DMA_PSC(x) (((x)&0x3)<<(19-DMA_CR_OFFSET)) /* Peripheral Setup Cycles */ -#define DMA_PSC_MASK SET_DMA_PSC(3) -#define GET_DMA_PSC(x) (((x)&DMA_PSC_MASK)>>(19-DMA_CR_OFFSET)) - -#define SET_DMA_PWC(x) (((x)&0x3F)<<(13-DMA_CR_OFFSET)) /* Peripheral Wait Cycles */ -#define DMA_PWC_MASK SET_DMA_PWC(0x3F) -#define GET_DMA_PWC(x) (((x)&DMA_PWC_MASK)>>(13-DMA_CR_OFFSET)) - -#define SET_DMA_PHC(x) (((x)&0x7)<<(10-DMA_CR_OFFSET)) /* Peripheral Hold Cycles */ -#define DMA_PHC_MASK SET_DMA_PHC(0x7) -#define GET_DMA_PHC(x) (((x)&DMA_PHC_MASK)>>(10-DMA_CR_OFFSET)) - -#define DMA_ETD_OUTPUT (1<<(9-DMA_CR_OFFSET)) /* EOT pin is a TC output */ -#define SET_DMA_ETD(x) (((x)&0x1)<<(9-DMA_CR_OFFSET)) - -#define DMA_TCE_ENABLE (1<<(8-DMA_CR_OFFSET)) -#define SET_DMA_TCE(x) (((x)&0x1)<<(8-DMA_CR_OFFSET)) - -#define DMA_DEC (1<<(2)) /* Address Decrement */ -#define SET_DMA_DEC(x) (((x)&0x1)<<2) -#define GET_DMA_DEC(x) (((x)&DMA_DEC)>>2) - - -/* - * Transfer Modes - * These modes are defined in a way that makes it possible to - * simply "or" in the value in the control register. - */ - -#define DMA_MODE_MM (SET_DMA_TM(TM_S_MM)) /* memory to memory */ - - /* Device-paced memory to memory, */ - /* device is at source address */ -#define DMA_MODE_MM_DEVATSRC (DMA_TD | SET_DMA_TM(TM_D_MM)) - - /* Device-paced memory to memory, */ - /* device is at destination address */ -#define DMA_MODE_MM_DEVATDST (SET_DMA_TM(TM_D_MM)) - -/* 405gp/440gp */ -#define SET_DMA_PREFETCH(x) (((x)&0x3)<<(4-DMA_CR_OFFSET)) /* Memory Read Prefetch */ -#define DMA_PREFETCH_MASK SET_DMA_PREFETCH(3) -#define PREFETCH_1 0 /* Prefetch 1 Double Word */ -#define PREFETCH_2 1 -#define PREFETCH_4 2 -#define GET_DMA_PREFETCH(x) (((x)&DMA_PREFETCH_MASK)>>(4-DMA_CR_OFFSET)) - -#define DMA_PCE (1<<(3-DMA_CR_OFFSET)) /* Parity Check Enable */ -#define SET_DMA_PCE(x) (((x)&0x1)<<(3-DMA_CR_OFFSET)) -#define GET_DMA_PCE(x) (((x)&DMA_PCE)>>(3-DMA_CR_OFFSET)) - -/* stb3x */ - -#define DMA_ECE_ENABLE (1<<5) -#define SET_DMA_ECE(x) (((x)&0x1)<<5) -#define GET_DMA_ECE(x) (((x)&DMA_ECE_ENABLE)>>5) - -#define DMA_TCD_DISABLE (1<<4) -#define SET_DMA_TCD(x) (((x)&0x1)<<4) -#define GET_DMA_TCD(x) (((x)&DMA_TCD_DISABLE)>>4) - -typedef uint32_t sgl_handle_t; - -#ifdef CONFIG_PPC4xx_EDMA - -#define SGL_LIST_SIZE 4096 -#define DMA_PPC4xx_SIZE SGL_LIST_SIZE - -#define SET_DMA_PRIORITY(x) (((x)&0x3)<<(6-DMA_CR_OFFSET)) /* DMA Channel Priority */ -#define DMA_PRIORITY_MASK SET_DMA_PRIORITY(3) -#define PRIORITY_LOW 0 -#define PRIORITY_MID_LOW 1 -#define PRIORITY_MID_HIGH 2 -#define PRIORITY_HIGH 3 -#define GET_DMA_PRIORITY(x) (((x)&DMA_PRIORITY_MASK)>>(6-DMA_CR_OFFSET)) - -/* - * DMA Polarity Configuration Register - */ -#define DMAReq_ActiveLow(chan) (1<<(31-(chan*3))) -#define DMAAck_ActiveLow(chan) (1<<(30-(chan*3))) -#define EOT_ActiveLow(chan) (1<<(29-(chan*3))) /* End of Transfer */ - -/* - * DMA Sleep Mode Register - */ -#define SLEEP_MODE_ENABLE (1<<21) - -/* - * DMA Status Register - */ -#define DMA_CS0 (1<<31) /* Terminal Count has been reached */ -#define DMA_CS1 (1<<30) -#define DMA_CS2 (1<<29) -#define DMA_CS3 (1<<28) - -#define DMA_TS0 (1<<27) /* End of Transfer has been requested */ -#define DMA_TS1 (1<<26) -#define DMA_TS2 (1<<25) -#define DMA_TS3 (1<<24) - -#define DMA_CH0_ERR (1<<23) /* DMA Chanel 0 Error */ -#define DMA_CH1_ERR (1<<22) -#define DMA_CH2_ERR (1<<21) -#define DMA_CH3_ERR (1<<20) - -#define DMA_IN_DMA_REQ0 (1<<19) /* Internal DMA Request is pending */ -#define DMA_IN_DMA_REQ1 (1<<18) -#define DMA_IN_DMA_REQ2 (1<<17) -#define DMA_IN_DMA_REQ3 (1<<16) - -#define DMA_EXT_DMA_REQ0 (1<<15) /* External DMA Request is pending */ -#define DMA_EXT_DMA_REQ1 (1<<14) -#define DMA_EXT_DMA_REQ2 (1<<13) -#define DMA_EXT_DMA_REQ3 (1<<12) - -#define DMA_CH0_BUSY (1<<11) /* DMA Channel 0 Busy */ -#define DMA_CH1_BUSY (1<<10) -#define DMA_CH2_BUSY (1<<9) -#define DMA_CH3_BUSY (1<<8) - -#define DMA_SG0 (1<<7) /* DMA Channel 0 Scatter/Gather in progress */ -#define DMA_SG1 (1<<6) -#define DMA_SG2 (1<<5) -#define DMA_SG3 (1<<4) - -/* DMA Channel Count Register */ -#define DMA_CTC_BTEN (1<<23) /* Burst Enable/Disable bit */ -#define DMA_CTC_BSIZ_MSK (3<<21) /* Mask of the Burst size bits */ -#define DMA_CTC_BSIZ_2 (0) -#define DMA_CTC_BSIZ_4 (1<<21) -#define DMA_CTC_BSIZ_8 (2<<21) -#define DMA_CTC_BSIZ_16 (3<<21) - -/* - * DMA SG Command Register - */ -#define SSG_ENABLE(chan) (1<<(31-chan)) /* Start Scatter Gather */ -#define SSG_MASK_ENABLE(chan) (1<<(15-chan)) /* Enable writing to SSG0 bit */ - -/* - * DMA Scatter/Gather Descriptor Bit fields - */ -#define SG_LINK (1<<31) /* Link */ -#define SG_TCI_ENABLE (1<<29) /* Enable Terminal Count Interrupt */ -#define SG_ETI_ENABLE (1<<28) /* Enable End of Transfer Interrupt */ -#define SG_ERI_ENABLE (1<<27) /* Enable Error Interrupt */ -#define SG_COUNT_MASK 0xFFFF /* Count Field */ - -#define SET_DMA_CONTROL \ - (SET_DMA_CIE_ENABLE(p_init->int_enable) | /* interrupt enable */ \ - SET_DMA_BEN(p_init->buffer_enable) | /* buffer enable */\ - SET_DMA_ETD(p_init->etd_output) | /* end of transfer pin */ \ - SET_DMA_TCE(p_init->tce_enable) | /* terminal count enable */ \ - SET_DMA_PL(p_init->pl) | /* peripheral location */ \ - SET_DMA_DAI(p_init->dai) | /* dest addr increment */ \ - SET_DMA_SAI(p_init->sai) | /* src addr increment */ \ - SET_DMA_PRIORITY(p_init->cp) | /* channel priority */ \ - SET_DMA_PW(p_init->pwidth) | /* peripheral/bus width */ \ - SET_DMA_PSC(p_init->psc) | /* peripheral setup cycles */ \ - SET_DMA_PWC(p_init->pwc) | /* peripheral wait cycles */ \ - SET_DMA_PHC(p_init->phc) | /* peripheral hold cycles */ \ - SET_DMA_PREFETCH(p_init->pf) /* read prefetch */) - -#define GET_DMA_POLARITY(chan) (DMAReq_ActiveLow(chan) | DMAAck_ActiveLow(chan) | EOT_ActiveLow(chan)) - -#elif defined(CONFIG_STB03xxx) /* stb03xxx */ - -#define DMA_PPC4xx_SIZE 4096 - -/* - * DMA Status Register - */ - -#define SET_DMA_PRIORITY(x) (((x)&0x00800001)) /* DMA Channel Priority */ -#define DMA_PRIORITY_MASK 0x00800001 -#define PRIORITY_LOW 0x00000000 -#define PRIORITY_MID_LOW 0x00000001 -#define PRIORITY_MID_HIGH 0x00800000 -#define PRIORITY_HIGH 0x00800001 -#define GET_DMA_PRIORITY(x) (((((x)&DMA_PRIORITY_MASK) &0x00800000) >> 22 ) | (((x)&DMA_PRIORITY_MASK) &0x00000001)) - -#define DMA_CS0 (1<<31) /* Terminal Count has been reached */ -#define DMA_CS1 (1<<30) -#define DMA_CS2 (1<<29) -#define DMA_CS3 (1<<28) - -#define DMA_TS0 (1<<27) /* End of Transfer has been requested */ -#define DMA_TS1 (1<<26) -#define DMA_TS2 (1<<25) -#define DMA_TS3 (1<<24) - -#define DMA_CH0_ERR (1<<23) /* DMA Chanel 0 Error */ -#define DMA_CH1_ERR (1<<22) -#define DMA_CH2_ERR (1<<21) -#define DMA_CH3_ERR (1<<20) - -#define DMA_CT0 (1<<19) /* Chained transfere */ - -#define DMA_IN_DMA_REQ0 (1<<18) /* Internal DMA Request is pending */ -#define DMA_IN_DMA_REQ1 (1<<17) -#define DMA_IN_DMA_REQ2 (1<<16) -#define DMA_IN_DMA_REQ3 (1<<15) - -#define DMA_EXT_DMA_REQ0 (1<<14) /* External DMA Request is pending */ -#define DMA_EXT_DMA_REQ1 (1<<13) -#define DMA_EXT_DMA_REQ2 (1<<12) -#define DMA_EXT_DMA_REQ3 (1<<11) - -#define DMA_CH0_BUSY (1<<10) /* DMA Channel 0 Busy */ -#define DMA_CH1_BUSY (1<<9) -#define DMA_CH2_BUSY (1<<8) -#define DMA_CH3_BUSY (1<<7) - -#define DMA_CT1 (1<<6) /* Chained transfere */ -#define DMA_CT2 (1<<5) -#define DMA_CT3 (1<<4) - -#define DMA_CH_ENABLE (1<<7) -#define SET_DMA_CH(x) (((x)&0x1)<<7) -#define GET_DMA_CH(x) (((x)&DMA_CH_ENABLE)>>7) - -/* STBx25xxx dma unique */ -/* enable device port on a dma channel - * example ext 0 on dma 1 - */ - -#define SSP0_RECV 15 -#define SSP0_XMIT 14 -#define EXT_DMA_0 12 -#define SC1_XMIT 11 -#define SC1_RECV 10 -#define EXT_DMA_2 9 -#define EXT_DMA_3 8 -#define SERIAL2_XMIT 7 -#define SERIAL2_RECV 6 -#define SC0_XMIT 5 -#define SC0_RECV 4 -#define SERIAL1_XMIT 3 -#define SERIAL1_RECV 2 -#define SERIAL0_XMIT 1 -#define SERIAL0_RECV 0 - -#define DMA_CHAN_0 1 -#define DMA_CHAN_1 2 -#define DMA_CHAN_2 3 -#define DMA_CHAN_3 4 - -/* end STBx25xx */ - -/* - * Bit 30 must be one for Redwoods, otherwise transfers may receive errors. - */ -#define DMA_CR_MB0 0x2 - -#define SET_DMA_CONTROL \ - (SET_DMA_CIE_ENABLE(p_init->int_enable) | /* interrupt enable */ \ - SET_DMA_ETD(p_init->etd_output) | /* end of transfer pin */ \ - SET_DMA_TCE(p_init->tce_enable) | /* terminal count enable */ \ - SET_DMA_PL(p_init->pl) | /* peripheral location */ \ - SET_DMA_DAI(p_init->dai) | /* dest addr increment */ \ - SET_DMA_SAI(p_init->sai) | /* src addr increment */ \ - SET_DMA_PRIORITY(p_init->cp) | /* channel priority */ \ - SET_DMA_PW(p_init->pwidth) | /* peripheral/bus width */ \ - SET_DMA_PSC(p_init->psc) | /* peripheral setup cycles */ \ - SET_DMA_PWC(p_init->pwc) | /* peripheral wait cycles */ \ - SET_DMA_PHC(p_init->phc) | /* peripheral hold cycles */ \ - SET_DMA_TCD(p_init->tcd_disable) | /* TC chain mode disable */ \ - SET_DMA_ECE(p_init->ece_enable) | /* ECE chanin mode enable */ \ - SET_DMA_CH(p_init->ch_enable) | /* Chain enable */ \ - DMA_CR_MB0 /* must be one */) - -#define GET_DMA_POLARITY(chan) chan - -#endif - -typedef struct { - unsigned short in_use; /* set when channel is being used, clr when - * available. - */ - /* - * Valid polarity settings: - * DMAReq_ActiveLow(n) - * DMAAck_ActiveLow(n) - * EOT_ActiveLow(n) - * - * n is 0 to max dma chans - */ - unsigned int polarity; - - char buffer_enable; /* Boolean: buffer enable */ - char tce_enable; /* Boolean: terminal count enable */ - char etd_output; /* Boolean: eot pin is a tc output */ - char pce; /* Boolean: parity check enable */ - - /* - * Peripheral location: - * INTERNAL_PERIPHERAL (UART0 on the 405GP) - * EXTERNAL_PERIPHERAL - */ - char pl; /* internal/external peripheral */ - - /* - * Valid pwidth settings: - * PW_8 - * PW_16 - * PW_32 - * PW_64 - */ - unsigned int pwidth; - - char dai; /* Boolean: dst address increment */ - char sai; /* Boolean: src address increment */ - - /* - * Valid psc settings: 0-3 - */ - unsigned int psc; /* Peripheral Setup Cycles */ - - /* - * Valid pwc settings: - * 0-63 - */ - unsigned int pwc; /* Peripheral Wait Cycles */ - - /* - * Valid phc settings: - * 0-7 - */ - unsigned int phc; /* Peripheral Hold Cycles */ - - /* - * Valid cp (channel priority) settings: - * PRIORITY_LOW - * PRIORITY_MID_LOW - * PRIORITY_MID_HIGH - * PRIORITY_HIGH - */ - unsigned int cp; /* channel priority */ - - /* - * Valid pf (memory read prefetch) settings: - * - * PREFETCH_1 - * PREFETCH_2 - * PREFETCH_4 - */ - unsigned int pf; /* memory read prefetch */ - - /* - * Boolean: channel interrupt enable - * NOTE: for sgl transfers, only the last descriptor will be setup to - * interrupt. - */ - char int_enable; - - char shift; /* easy access to byte_count shift, based on */ - /* the width of the channel */ - - uint32_t control; /* channel control word */ - - /* These variabled are used ONLY in single dma transfers */ - unsigned int mode; /* transfer mode */ - phys_addr_t addr; - char ce; /* channel enable */ -#ifdef CONFIG_STB03xxx - char ch_enable; - char tcd_disable; - char ece_enable; - char td; /* transfer direction */ -#endif - - char int_on_final_sg;/* for scatter/gather - only interrupt on last sg */ -} ppc_dma_ch_t; - -/* - * PPC44x DMA implementations have a slightly different - * descriptor layout. Probably moved about due to the - * change to 64-bit addresses and link pointer. I don't - * know why they didn't just leave control_count after - * the dst_addr. - */ -#ifdef PPC4xx_DMA_64BIT -typedef struct { - uint32_t control; - uint32_t control_count; - phys_addr_t src_addr; - phys_addr_t dst_addr; - phys_addr_t next; -} ppc_sgl_t; -#else -typedef struct { - uint32_t control; - phys_addr_t src_addr; - phys_addr_t dst_addr; - uint32_t control_count; - uint32_t next; -} ppc_sgl_t; -#endif - -typedef struct { - unsigned int dmanr; - uint32_t control; /* channel ctrl word; loaded from each descrptr */ - uint32_t sgl_control; /* LK, TCI, ETI, and ERI bits in sgl descriptor */ - dma_addr_t dma_addr; /* dma (physical) address of this list */ - ppc_sgl_t *phead; - dma_addr_t phead_dma; - ppc_sgl_t *ptail; - dma_addr_t ptail_dma; -} sgl_list_info_t; - -typedef struct { - phys_addr_t *src_addr; - phys_addr_t *dst_addr; - phys_addr_t dma_src_addr; - phys_addr_t dma_dst_addr; -} pci_alloc_desc_t; - -extern ppc_dma_ch_t dma_channels[]; - -/* - * The DMA API are in ppc4xx_dma.c and ppc4xx_sgdma.c - */ -extern int ppc4xx_init_dma_channel(unsigned int, ppc_dma_ch_t *); -extern int ppc4xx_get_channel_config(unsigned int, ppc_dma_ch_t *); -extern int ppc4xx_set_channel_priority(unsigned int, unsigned int); -extern unsigned int ppc4xx_get_peripheral_width(unsigned int); -extern void ppc4xx_set_sg_addr(int, phys_addr_t); -extern int ppc4xx_add_dma_sgl(sgl_handle_t, phys_addr_t, phys_addr_t, unsigned int); -extern void ppc4xx_enable_dma_sgl(sgl_handle_t); -extern void ppc4xx_disable_dma_sgl(sgl_handle_t); -extern int ppc4xx_get_dma_sgl_residue(sgl_handle_t, phys_addr_t *, phys_addr_t *); -extern int ppc4xx_delete_dma_sgl_element(sgl_handle_t, phys_addr_t *, phys_addr_t *); -extern int ppc4xx_alloc_dma_handle(sgl_handle_t *, unsigned int, unsigned int); -extern void ppc4xx_free_dma_handle(sgl_handle_t); -extern int ppc4xx_get_dma_status(void); -extern int ppc4xx_enable_burst(unsigned int); -extern int ppc4xx_disable_burst(unsigned int); -extern int ppc4xx_set_burst_size(unsigned int, unsigned int); -extern void ppc4xx_set_src_addr(int dmanr, phys_addr_t src_addr); -extern void ppc4xx_set_dst_addr(int dmanr, phys_addr_t dst_addr); -extern void ppc4xx_enable_dma(unsigned int dmanr); -extern void ppc4xx_disable_dma(unsigned int dmanr); -extern void ppc4xx_set_dma_count(unsigned int dmanr, unsigned int count); -extern int ppc4xx_get_dma_residue(unsigned int dmanr); -extern void ppc4xx_set_dma_addr2(unsigned int dmanr, phys_addr_t src_dma_addr, - phys_addr_t dst_dma_addr); -extern int ppc4xx_enable_dma_interrupt(unsigned int dmanr); -extern int ppc4xx_disable_dma_interrupt(unsigned int dmanr); -extern int ppc4xx_clr_dma_status(unsigned int dmanr); -extern int ppc4xx_map_dma_port(unsigned int dmanr, unsigned int ocp_dma,short dma_chan); -extern int ppc4xx_disable_dma_port(unsigned int dmanr, unsigned int ocp_dma,short dma_chan); -extern int ppc4xx_set_dma_mode(unsigned int dmanr, unsigned int mode); - -/* These are in kernel/dma.c: */ - -/* reserve a DMA channel */ -extern int request_dma(unsigned int dmanr, const char *device_id); -/* release it again */ -extern void free_dma(unsigned int dmanr); -#endif -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/ppc4xx_pic.h b/include/asm-ppc/ppc4xx_pic.h deleted file mode 100644 index e44261206f8b..000000000000 --- a/include/asm-ppc/ppc4xx_pic.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * include/asm-ppc/ppc4xx_pic.h - * - * Interrupt controller driver for PowerPC 4xx-based processors. - * - * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu> - * - * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> - * Copyright (c) 2004 Zultys Technologies - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __PPC4XX_PIC_H__ -#define __PPC4XX_PIC_H__ - -#include <linux/types.h> -#include <linux/irq.h> - -/* "Fixed" UIC settings (they are chip, not board specific), - * e.g. polarity/triggerring for internal interrupt sources. - * - * Platform port should provide NR_UICS-sized array named ppc4xx_core_uic_cfg - * with these "fixed" settings: .polarity contains exact value which will - * be written (masked with "ext_irq_mask") into UICx_PR register, - * .triggering - to UICx_TR. - * - * Settings for external IRQs can be specified separately by the - * board support code. In this case properly sized array of unsigned - * char named ppc4xx_uic_ext_irq_cfg should be filled with correct - * values using IRQ_SENSE_XXXXX and IRQ_POLARITY_XXXXXXX defines. - * - * If these arrays aren't provided, UIC initialization code keeps firmware - * configuration. Also, ppc4xx_uic_ext_irq_cfg implies ppc4xx_core_uic_cfg - * is defined. - * - * Both ppc4xx_core_uic_cfg and ppc4xx_uic_ext_irq_cfg are declared as - * "weak" symbols in ppc4xx_pic.c - * - */ -struct ppc4xx_uic_settings { - u32 polarity; - u32 triggering; - u32 ext_irq_mask; -}; - -extern void ppc4xx_pic_init(void); - -#endif /* __PPC4XX_PIC_H__ */ diff --git a/include/asm-ppc/ppc_sys.h b/include/asm-ppc/ppc_sys.h deleted file mode 100644 index d2fee41d600b..000000000000 --- a/include/asm-ppc/ppc_sys.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - * include/asm-ppc/ppc_sys.h - * - * PPC system definitions and library functions - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2005 Freescale Semiconductor, Inc - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifdef __KERNEL__ -#ifndef __ASM_PPC_SYS_H -#define __ASM_PPC_SYS_H - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/types.h> - -#if defined(CONFIG_8260) -#include <asm/mpc8260.h> -#elif defined(CONFIG_8xx) -#include <asm/mpc8xx.h> -#elif defined(CONFIG_PPC_MPC52xx) -#include <asm/mpc52xx.h> -#elif defined(CONFIG_MPC10X_BRIDGE) -#include <asm/mpc10x.h> -#else -#error "need definition of ppc_sys_devices" -#endif - -#define PPC_SYS_IORESOURCE_FIXUPPED 0x00000001 - -struct ppc_sys_spec { - /* PPC sys is matched via (ID & mask) == value, id could be - * PVR, SVR, IMMR, * etc. */ - u32 mask; - u32 value; - u32 num_devices; - char *ppc_sys_name; - u8 config[NUM_PPC_SYS_DEVS]; - enum ppc_sys_devices *device_list; -}; - -struct platform_notify_dev_map { - const char *bus_id; - void (*rtn)(struct platform_device * pdev, int idx); -}; - -enum platform_device_func { - PPC_SYS_FUNC_DUMMY = 0, - PPC_SYS_FUNC_ETH = 1, - PPC_SYS_FUNC_UART = 2, - PPC_SYS_FUNC_HLDC = 3, - PPC_SYS_FUNC_USB = 4, - PPC_SYS_FUNC_IRDA = 5, -}; - -#define PPC_SYS_CONFIG_DISABLED 1 - -/* describes all specific chips and which devices they have on them */ -extern struct ppc_sys_spec ppc_sys_specs[]; -extern struct ppc_sys_spec *cur_ppc_sys_spec; - -/* determine which specific SOC we are */ -extern void identify_ppc_sys_by_id(u32 id) __init; -extern void identify_ppc_sys_by_name(char *name) __init; -extern void identify_ppc_sys_by_name_and_id(char *name, u32 id) __init; - -/* describes all devices that may exist in a given family of processors */ -extern struct platform_device ppc_sys_platform_devices[]; - -/* allow any platform_device fixup to occur before device is registered */ -extern int (*ppc_sys_device_fixup) (struct platform_device * pdev); - -/* Update all memory resources by paddr, call before platform_device_register */ -extern void ppc_sys_fixup_mem_resource(struct platform_device *pdev, - phys_addr_t paddr) __init; - -/* Get platform_data pointer out of platform device, call before platform_device_register */ -extern void *ppc_sys_get_pdata(enum ppc_sys_devices dev) __init; - -/* remove a device from the system */ -extern void ppc_sys_device_remove(enum ppc_sys_devices dev); - -/* Function assignment stuff */ -void ppc_sys_device_initfunc(void); -void ppc_sys_device_setfunc(enum ppc_sys_devices dev, - enum platform_device_func func); -void ppc_sys_device_set_func_all(enum platform_device_func func); - -void platform_notify_map(const struct platform_notify_dev_map *map, - struct device *dev); - -/* Enable / disable stuff */ -void ppc_sys_device_disable(enum ppc_sys_devices dev); -void ppc_sys_device_enable(enum ppc_sys_devices dev); -void ppc_sys_device_enable_all(void); -void ppc_sys_device_disable_all(void); - -#endif /* __ASM_PPC_SYS_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/ppcboot.h b/include/asm-ppc/ppcboot.h deleted file mode 100644 index 3819e17cd7b0..000000000000 --- a/include/asm-ppc/ppcboot.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * (C) Copyright 2000, 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __ASM_PPCBOOT_H__ -#define __ASM_PPCBOOT_H__ - -/* - * Board information passed to kernel from PPCBoot - * - * include/asm-ppc/ppcboot.h - */ - -#ifndef __ASSEMBLY__ -#include <linux/types.h> - -typedef struct bd_info { - unsigned long bi_memstart; /* start of DRAM memory */ - unsigned long bi_memsize; /* size of DRAM memory in bytes */ - unsigned long bi_flashstart; /* start of FLASH memory */ - unsigned long bi_flashsize; /* size of FLASH memory */ - unsigned long bi_flashoffset; /* reserved area for startup monitor */ - unsigned long bi_sramstart; /* start of SRAM memory */ - unsigned long bi_sramsize; /* size of SRAM memory */ -#if defined(CONFIG_8xx) || defined(CONFIG_CPM2) - unsigned long bi_immr_base; /* base of IMMR register */ -#endif -#if defined(CONFIG_PPC_MPC52xx) - unsigned long bi_mbar_base; /* base of internal registers */ -#endif - unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */ - unsigned long bi_ip_addr; /* IP Address */ - unsigned char bi_enetaddr[6]; /* Ethernet address */ - unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ - unsigned long bi_intfreq; /* Internal Freq, in MHz */ - unsigned long bi_busfreq; /* Bus Freq, in MHz */ -#if defined(CONFIG_CPM2) - unsigned long bi_cpmfreq; /* CPM_CLK Freq, in MHz */ - unsigned long bi_brgfreq; /* BRG_CLK Freq, in MHz */ - unsigned long bi_sccfreq; /* SCC_CLK Freq, in MHz */ - unsigned long bi_vco; /* VCO Out from PLL, in MHz */ -#endif -#if defined(CONFIG_PPC_MPC52xx) - unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */ - unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */ -#endif - unsigned long bi_baudrate; /* Console Baudrate */ -#if defined(CONFIG_4xx) - unsigned char bi_s_version[4]; /* Version of this structure */ - unsigned char bi_r_version[32]; /* Version of the ROM (IBM) */ - unsigned int bi_procfreq; /* CPU (Internal) Freq, in Hz */ - unsigned int bi_plb_busfreq; /* PLB Bus speed, in Hz */ - unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ - unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ -#endif -#if defined(CONFIG_HYMOD) - hymod_conf_t bi_hymod_conf; /* hymod configuration information */ -#endif -#if defined(CONFIG_EVB64260) || defined(CONFIG_405EP) || defined(CONFIG_44x) - /* second onboard ethernet port */ - unsigned char bi_enet1addr[6]; -#endif -#if defined(CONFIG_EVB64260) || defined(CONFIG_440GX) - /* third onboard ethernet ports */ - unsigned char bi_enet2addr[6]; -#endif -#if defined(CONFIG_440GX) - /* fourth onboard ethernet ports */ - unsigned char bi_enet3addr[6]; -#endif -#if defined(CONFIG_4xx) - unsigned int bi_opbfreq; /* OB clock in Hz */ - int bi_iic_fast[2]; /* Use fast i2c mode */ -#endif -#if defined(CONFIG_440GX) - int bi_phynum[4]; /* phy mapping */ - int bi_phymode[4]; /* phy mode */ -#endif -} bd_t; - -#define bi_tbfreq bi_intfreq - -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_PPCBOOT_H__ */ diff --git a/include/asm-ppc/prep_nvram.h b/include/asm-ppc/prep_nvram.h deleted file mode 100644 index 6dbc36a84df2..000000000000 --- a/include/asm-ppc/prep_nvram.h +++ /dev/null @@ -1,153 +0,0 @@ -/* - * PreP compliant NVRAM access - */ - -/* Corey Minyard (minyard@acm.org) - Stolen from PReP book. Per the - license I must say: - (C) Copyright (Corey Minyard), (1998). All rights reserved - */ - -/* Structure map for NVRAM on PowerPC Reference Platform */ -/* All fields are either character/byte strings which are valid either - endian or they are big-endian numbers. - - There are a number of Date and Time fields which are in RTC format, - big-endian. These are stored in UT (GMT). - - For enum's: if given in hex then they are bit significant, i.e. only - one bit is on for each enum. -*/ -#ifdef __KERNEL__ -#ifndef _PPC_PREP_NVRAM_H -#define _PPC_PREP_NVRAM_H - -#define MAX_PREP_NVRAM 0x8000 -#define PREP_NVRAM_AS0 0x74 -#define PREP_NVRAM_AS1 0x75 -#define PREP_NVRAM_DATA 0x77 - -#define NVSIZE 4096 /* size of NVRAM */ -#define OSAREASIZE 512 /* size of OSArea space */ -#define CONFSIZE 1024 /* guess at size of Configuration space */ - -typedef struct _SECURITY { - unsigned long BootErrCnt; /* Count of boot password errors */ - unsigned long ConfigErrCnt; /* Count of config password errors */ - unsigned long BootErrorDT[2]; /* Date&Time from RTC of last error in pw */ - unsigned long ConfigErrorDT[2]; /* Date&Time from RTC of last error in pw */ - unsigned long BootCorrectDT[2]; /* Date&Time from RTC of last correct pw */ - unsigned long ConfigCorrectDT[2]; /* Date&Time from RTC of last correct pw */ - unsigned long BootSetDT[2]; /* Date&Time from RTC of last set of pw */ - unsigned long ConfigSetDT[2]; /* Date&Time from RTC of last set of pw */ - unsigned char Serial[16]; /* Box serial number */ -} SECURITY; - -typedef enum _OS_ID { - Unknown = 0, - Firmware = 1, - AIX = 2, - NT = 3, - MKOS2 = 4, - MKAIX = 5, - Taligent = 6, - Solaris = 7, - MK = 12 -} OS_ID; - -typedef struct _ERROR_LOG { - unsigned char ErrorLogEntry[40]; /* To be architected */ -} ERROR_LOG; - -typedef enum _BOOT_STATUS { - BootStarted = 0x01, - BootFinished = 0x02, - RestartStarted = 0x04, - RestartFinished = 0x08, - PowerFailStarted = 0x10, - PowerFailFinished = 0x20, - ProcessorReady = 0x40, - ProcessorRunning = 0x80, - ProcessorStart = 0x0100 -} BOOT_STATUS; - -typedef struct _RESTART_BLOCK { - unsigned short Version; - unsigned short Revision; - unsigned long ResumeReserve1[2]; - volatile unsigned long BootStatus; - unsigned long CheckSum; /* Checksum of RESTART_BLOCK */ - void * RestartAddress; - void * SaveAreaAddr; - unsigned long SaveAreaLength; -} RESTART_BLOCK; - -typedef enum _OSAREA_USAGE { - Empty = 0, - Used = 1 -} OSAREA_USAGE; - -typedef enum _PM_MODE { - Suspend = 0x80, /* Part of state is in memory */ - Normal = 0x00 /* No power management in effect */ -} PMMODE; - -typedef struct _HEADER { - unsigned short Size; /* NVRAM size in K(1024) */ - unsigned char Version; /* Structure map different */ - unsigned char Revision; /* Structure map the same -may - be new values in old fields - in other words old code still works */ - unsigned short Crc1; /* check sum from beginning of nvram to OSArea */ - unsigned short Crc2; /* check sum of config */ - unsigned char LastOS; /* OS_ID */ - unsigned char Endian; /* B if big endian, L if little endian */ - unsigned char OSAreaUsage; /* OSAREA_USAGE */ - unsigned char PMMode; /* Shutdown mode */ - RESTART_BLOCK RestartBlock; - SECURITY Security; - ERROR_LOG ErrorLog[2]; - - /* Global Environment information */ - void * GEAddress; - unsigned long GELength; - - /* Date&Time from RTC of last change to Global Environment */ - unsigned long GELastWriteDT[2]; - - /* Configuration information */ - void * ConfigAddress; - unsigned long ConfigLength; - - /* Date&Time from RTC of last change to Configuration */ - unsigned long ConfigLastWriteDT[2]; - unsigned long ConfigCount; /* Count of entries in Configuration */ - - /* OS dependent temp area */ - void * OSAreaAddress; - unsigned long OSAreaLength; - - /* Date&Time from RTC of last change to OSAreaArea */ - unsigned long OSAreaLastWriteDT[2]; -} HEADER; - -/* Here is the whole map of the NVRAM */ -typedef struct _NVRAM_MAP { - HEADER Header; - unsigned char GEArea[NVSIZE-CONFSIZE-OSAREASIZE-sizeof(HEADER)]; - unsigned char OSArea[OSAREASIZE]; - unsigned char ConfigArea[CONFSIZE]; -} NVRAM_MAP; - -/* Routines to manipulate the NVRAM */ -void init_prep_nvram(void); -char *prep_nvram_get_var(const char *name); -char *prep_nvram_first_var(void); -char *prep_nvram_next_var(char *name); - -/* Routines to read and write directly to the NVRAM */ -unsigned char prep_nvram_read_val(int addr); -void prep_nvram_write_val(int addr, - unsigned char val); - -#endif /* _PPC_PREP_NVRAM_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/prom.h b/include/asm-ppc/prom.h deleted file mode 100644 index 71f4c996fe75..000000000000 --- a/include/asm-ppc/prom.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - * Definitions for talking to the Open Firmware PROM on - * Power Macintosh computers. - * - * Copyright (C) 1996 Paul Mackerras. - */ -#ifdef __KERNEL__ -#ifndef _PPC_PROM_H -#define _PPC_PROM_H - -/* This is used in arch/ppc/mm/mem_pieces.h */ -struct reg_property { - unsigned int address; - unsigned int size; -}; - -/* - * These macros assist in performing the address calculations that we - * need to do to access data when the kernel is running at an address - * that is different from the address that the kernel is linked at. - * The reloc_offset() function returns the difference between these - * two addresses and the macros simplify the process of adding or - * subtracting this offset to/from pointer values. - */ -extern unsigned long reloc_offset(void); -extern unsigned long add_reloc_offset(unsigned long); -extern unsigned long sub_reloc_offset(unsigned long); - -#define PTRRELOC(x) ((typeof(x))add_reloc_offset((unsigned long)(x))) -#define PTRUNRELOC(x) ((typeof(x))sub_reloc_offset((unsigned long)(x))) - -/* - * Fallback definitions since we don't support OF in arch/ppc any more. - */ -#define machine_is_compatible(x) 0 -#define of_find_compatible_node(f, t, c) NULL -#define of_get_property(p, n, l) NULL - -#endif /* _PPC_PROM_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/raven.h b/include/asm-ppc/raven.h deleted file mode 100644 index 66f52cc0a03c..000000000000 --- a/include/asm-ppc/raven.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * include/asm-ppc/raven.h -- Raven MPIC chip. - * - * Copyright (C) 1998 Johnnie Peters - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -#ifdef __KERNEL__ -#ifndef _ASMPPC_RAVEN_H -#define _ASMPPC_RAVEN_H - -#define MVME2600_INT_SIO 0 -#define MVME2600_INT_FALCN_ECC_ERR 1 -#define MVME2600_INT_PCI_ETHERNET 2 -#define MVME2600_INT_PCI_SCSI 3 -#define MVME2600_INT_PCI_GRAPHICS 4 -#define MVME2600_INT_PCI_VME0 5 -#define MVME2600_INT_PCI_VME1 6 -#define MVME2600_INT_PCI_VME2 7 -#define MVME2600_INT_PCI_VME3 8 -#define MVME2600_INT_PCI_INTA 9 -#define MVME2600_INT_PCI_INTB 10 -#define MVME2600_INT_PCI_INTC 11 -#define MVME2600_INT_PCI_INTD 12 -#define MVME2600_INT_LM_SIG0 13 -#define MVME2600_INT_LM_SIG1 14 - -extern struct hw_interrupt_type raven_pic; - -extern int raven_init(void); -#endif /* _ASMPPC_RAVEN_H */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/reg_booke.h b/include/asm-ppc/reg_booke.h deleted file mode 100644 index 91e96af88bd8..000000000000 --- a/include/asm-ppc/reg_booke.h +++ /dev/null @@ -1,443 +0,0 @@ -/* - * Contains register definitions common to the Book E PowerPC - * specification. Notice that while the IBM-40x series of CPUs - * are not true Book E PowerPCs, they borrowed a number of features - * before Book E was finalized, and are included here as well. Unfortunatly, - * they sometimes used different locations than true Book E CPUs did. - */ -#ifdef __KERNEL__ -#ifndef __ASM_PPC_REG_BOOKE_H__ -#define __ASM_PPC_REG_BOOKE_H__ - -#ifndef __ASSEMBLY__ -/* Performance Monitor Registers */ -#define mfpmr(rn) ({unsigned int rval; \ - asm volatile("mfpmr %0," __stringify(rn) \ - : "=r" (rval)); rval;}) -#define mtpmr(rn, v) asm volatile("mtpmr " __stringify(rn) ",%0" : : "r" (v)) -#endif /* __ASSEMBLY__ */ - -/* Freescale Book E Performance Monitor APU Registers */ -#define PMRN_PMC0 0x010 /* Performance Monitor Counter 0 */ -#define PMRN_PMC1 0x011 /* Performance Monitor Counter 1 */ -#define PMRN_PMC2 0x012 /* Performance Monitor Counter 1 */ -#define PMRN_PMC3 0x013 /* Performance Monitor Counter 1 */ -#define PMRN_PMLCA0 0x090 /* PM Local Control A0 */ -#define PMRN_PMLCA1 0x091 /* PM Local Control A1 */ -#define PMRN_PMLCA2 0x092 /* PM Local Control A2 */ -#define PMRN_PMLCA3 0x093 /* PM Local Control A3 */ - -#define PMLCA_FC 0x80000000 /* Freeze Counter */ -#define PMLCA_FCS 0x40000000 /* Freeze in Supervisor */ -#define PMLCA_FCU 0x20000000 /* Freeze in User */ -#define PMLCA_FCM1 0x10000000 /* Freeze when PMM==1 */ -#define PMLCA_FCM0 0x08000000 /* Freeze when PMM==0 */ -#define PMLCA_CE 0x04000000 /* Condition Enable */ - -#define PMLCA_EVENT_MASK 0x007f0000 /* Event field */ -#define PMLCA_EVENT_SHIFT 16 - -#define PMRN_PMLCB0 0x110 /* PM Local Control B0 */ -#define PMRN_PMLCB1 0x111 /* PM Local Control B1 */ -#define PMRN_PMLCB2 0x112 /* PM Local Control B2 */ -#define PMRN_PMLCB3 0x113 /* PM Local Control B3 */ - -#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshhold Multiple Field */ -#define PMLCB_THRESHMUL_SHIFT 8 - -#define PMLCB_THRESHOLD_MASK 0x003f /* Threshold Field */ -#define PMLCB_THRESHOLD_SHIFT 0 - -#define PMRN_PMGC0 0x190 /* PM Global Control 0 */ - -#define PMGC0_FAC 0x80000000 /* Freeze all Counters */ -#define PMGC0_PMIE 0x40000000 /* Interrupt Enable */ -#define PMGC0_FCECE 0x20000000 /* Freeze countes on - Enabled Condition or - Event */ - -#define PMRN_UPMC0 0x000 /* User Performance Monitor Counter 0 */ -#define PMRN_UPMC1 0x001 /* User Performance Monitor Counter 1 */ -#define PMRN_UPMC2 0x002 /* User Performance Monitor Counter 1 */ -#define PMRN_UPMC3 0x003 /* User Performance Monitor Counter 1 */ -#define PMRN_UPMLCA0 0x080 /* User PM Local Control A0 */ -#define PMRN_UPMLCA1 0x081 /* User PM Local Control A1 */ -#define PMRN_UPMLCA2 0x082 /* User PM Local Control A2 */ -#define PMRN_UPMLCA3 0x083 /* User PM Local Control A3 */ -#define PMRN_UPMLCB0 0x100 /* User PM Local Control B0 */ -#define PMRN_UPMLCB1 0x101 /* User PM Local Control B1 */ -#define PMRN_UPMLCB2 0x102 /* User PM Local Control B2 */ -#define PMRN_UPMLCB3 0x103 /* User PM Local Control B3 */ -#define PMRN_UPMGC0 0x180 /* User PM Global Control 0 */ - - -/* Machine State Register (MSR) Fields */ -#define MSR_UCLE (1<<26) /* User-mode cache lock enable */ -#define MSR_SPE (1<<25) /* Enable SPE */ -#define MSR_DWE (1<<10) /* Debug Wait Enable */ -#define MSR_UBLE (1<<10) /* BTB lock enable (e500) */ -#define MSR_IS MSR_IR /* Instruction Space */ -#define MSR_DS MSR_DR /* Data Space */ -#define MSR_PMM (1<<2) /* Performance monitor mark bit */ - -/* Default MSR for kernel mode. */ -#if defined (CONFIG_40x) -#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE) -#elif defined(CONFIG_BOOKE) -#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_CE) -#endif - -/* Special Purpose Registers (SPRNs)*/ -#define SPRN_DECAR 0x036 /* Decrementer Auto Reload Register */ -#define SPRN_IVPR 0x03F /* Interrupt Vector Prefix Register */ -#define SPRN_USPRG0 0x100 /* User Special Purpose Register General 0 */ -#define SPRN_SPRG4R 0x104 /* Special Purpose Register General 4 Read */ -#define SPRN_SPRG5R 0x105 /* Special Purpose Register General 5 Read */ -#define SPRN_SPRG6R 0x106 /* Special Purpose Register General 6 Read */ -#define SPRN_SPRG7R 0x107 /* Special Purpose Register General 7 Read */ -#define SPRN_SPRG4W 0x114 /* Special Purpose Register General 4 Write */ -#define SPRN_SPRG5W 0x115 /* Special Purpose Register General 5 Write */ -#define SPRN_SPRG6W 0x116 /* Special Purpose Register General 6 Write */ -#define SPRN_SPRG7W 0x117 /* Special Purpose Register General 7 Write */ -#define SPRN_DBCR2 0x136 /* Debug Control Register 2 */ -#define SPRN_IAC3 0x13A /* Instruction Address Compare 3 */ -#define SPRN_IAC4 0x13B /* Instruction Address Compare 4 */ -#define SPRN_DVC1 0x13E /* Data Value Compare Register 1 */ -#define SPRN_DVC2 0x13F /* Data Value Compare Register 2 */ -#define SPRN_IVOR0 0x190 /* Interrupt Vector Offset Register 0 */ -#define SPRN_IVOR1 0x191 /* Interrupt Vector Offset Register 1 */ -#define SPRN_IVOR2 0x192 /* Interrupt Vector Offset Register 2 */ -#define SPRN_IVOR3 0x193 /* Interrupt Vector Offset Register 3 */ -#define SPRN_IVOR4 0x194 /* Interrupt Vector Offset Register 4 */ -#define SPRN_IVOR5 0x195 /* Interrupt Vector Offset Register 5 */ -#define SPRN_IVOR6 0x196 /* Interrupt Vector Offset Register 6 */ -#define SPRN_IVOR7 0x197 /* Interrupt Vector Offset Register 7 */ -#define SPRN_IVOR8 0x198 /* Interrupt Vector Offset Register 8 */ -#define SPRN_IVOR9 0x199 /* Interrupt Vector Offset Register 9 */ -#define SPRN_IVOR10 0x19A /* Interrupt Vector Offset Register 10 */ -#define SPRN_IVOR11 0x19B /* Interrupt Vector Offset Register 11 */ -#define SPRN_IVOR12 0x19C /* Interrupt Vector Offset Register 12 */ -#define SPRN_IVOR13 0x19D /* Interrupt Vector Offset Register 13 */ -#define SPRN_IVOR14 0x19E /* Interrupt Vector Offset Register 14 */ -#define SPRN_IVOR15 0x19F /* Interrupt Vector Offset Register 15 */ -#define SPRN_SPEFSCR 0x200 /* SPE & Embedded FP Status & Control */ -#define SPRN_BBEAR 0x201 /* Branch Buffer Entry Address Register */ -#define SPRN_BBTAR 0x202 /* Branch Buffer Target Address Register */ -#define SPRN_IVOR32 0x210 /* Interrupt Vector Offset Register 32 */ -#define SPRN_IVOR33 0x211 /* Interrupt Vector Offset Register 33 */ -#define SPRN_IVOR34 0x212 /* Interrupt Vector Offset Register 34 */ -#define SPRN_IVOR35 0x213 /* Interrupt Vector Offset Register 35 */ -#define SPRN_MCSRR0 0x23A /* Machine Check Save and Restore Register 0 */ -#define SPRN_MCSRR1 0x23B /* Machine Check Save and Restore Register 1 */ -#define SPRN_MCSR 0x23C /* Machine Check Status Register */ -#define SPRN_MCAR 0x23D /* Machine Check Address Register */ -#define SPRN_DSRR0 0x23E /* Debug Save and Restore Register 0 */ -#define SPRN_DSRR1 0x23F /* Debug Save and Restore Register 1 */ -#define SPRN_MAS0 0x270 /* MMU Assist Register 0 */ -#define SPRN_MAS1 0x271 /* MMU Assist Register 1 */ -#define SPRN_MAS2 0x272 /* MMU Assist Register 2 */ -#define SPRN_MAS3 0x273 /* MMU Assist Register 3 */ -#define SPRN_MAS4 0x274 /* MMU Assist Register 4 */ -#define SPRN_MAS5 0x275 /* MMU Assist Register 5 */ -#define SPRN_MAS6 0x276 /* MMU Assist Register 6 */ -#define SPRN_MAS7 0x3b0 /* MMU Assist Register 7 */ -#define SPRN_PID1 0x279 /* Process ID Register 1 */ -#define SPRN_PID2 0x27A /* Process ID Register 2 */ -#define SPRN_TLB0CFG 0x2B0 /* TLB 0 Config Register */ -#define SPRN_TLB1CFG 0x2B1 /* TLB 1 Config Register */ -#define SPRN_CCR1 0x378 /* Core Configuration Register 1 */ -#define SPRN_ZPR 0x3B0 /* Zone Protection Register (40x) */ -#define SPRN_MMUCR 0x3B2 /* MMU Control Register */ -#define SPRN_CCR0 0x3B3 /* Core Configuration Register 0 */ -#define SPRN_SGR 0x3B9 /* Storage Guarded Register */ -#define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */ -#define SPRN_SLER 0x3BB /* Little-endian real mode */ -#define SPRN_SU0R 0x3BC /* "User 0" real mode (40x) */ -#define SPRN_DCMP 0x3D1 /* Data TLB Compare Register */ -#define SPRN_ICDBDR 0x3D3 /* Instruction Cache Debug Data Register */ -#define SPRN_EVPR 0x3D6 /* Exception Vector Prefix Register */ -#define SPRN_L1CSR0 0x3F2 /* L1 Cache Control and Status Register 0 */ -#define SPRN_L1CSR1 0x3F3 /* L1 Cache Control and Status Register 1 */ -#define SPRN_PIT 0x3DB /* Programmable Interval Timer */ -#define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */ -#define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */ -#define SPRN_SVR 0x3FF /* System Version Register */ - -/* - * SPRs which have conflicting definitions on true Book E versus classic, - * or IBM 40x. - */ -#ifdef CONFIG_BOOKE -#define SPRN_PID 0x030 /* Process ID */ -#define SPRN_PID0 SPRN_PID/* Process ID Register 0 */ -#define SPRN_CSRR0 0x03A /* Critical Save and Restore Register 0 */ -#define SPRN_CSRR1 0x03B /* Critical Save and Restore Register 1 */ -#define SPRN_DEAR 0x03D /* Data Error Address Register */ -#define SPRN_ESR 0x03E /* Exception Syndrome Register */ -#define SPRN_PIR 0x11E /* Processor Identification Register */ -#define SPRN_DBSR 0x130 /* Debug Status Register */ -#define SPRN_DBCR0 0x134 /* Debug Control Register 0 */ -#define SPRN_DBCR1 0x135 /* Debug Control Register 1 */ -#define SPRN_IAC1 0x138 /* Instruction Address Compare 1 */ -#define SPRN_IAC2 0x139 /* Instruction Address Compare 2 */ -#define SPRN_DAC1 0x13C /* Data Address Compare 1 */ -#define SPRN_DAC2 0x13D /* Data Address Compare 2 */ -#define SPRN_TSR 0x150 /* Timer Status Register */ -#define SPRN_TCR 0x154 /* Timer Control Register */ -#endif /* Book E */ -#ifdef CONFIG_40x -#define SPRN_PID 0x3B1 /* Process ID */ -#define SPRN_DBCR1 0x3BD /* Debug Control Register 1 */ -#define SPRN_ESR 0x3D4 /* Exception Syndrome Register */ -#define SPRN_DEAR 0x3D5 /* Data Error Address Register */ -#define SPRN_TSR 0x3D8 /* Timer Status Register */ -#define SPRN_TCR 0x3DA /* Timer Control Register */ -#define SPRN_SRR2 0x3DE /* Save/Restore Register 2 */ -#define SPRN_SRR3 0x3DF /* Save/Restore Register 3 */ -#define SPRN_DBSR 0x3F0 /* Debug Status Register */ -#define SPRN_DBCR0 0x3F2 /* Debug Control Register 0 */ -#define SPRN_DAC1 0x3F6 /* Data Address Compare 1 */ -#define SPRN_DAC2 0x3F7 /* Data Address Compare 2 */ -#define SPRN_CSRR0 SPRN_SRR2 /* Critical Save and Restore Register 0 */ -#define SPRN_CSRR1 SPRN_SRR3 /* Critical Save and Restore Register 1 */ -#endif - -/* Bit definitions for CCR1. */ -#define CCR1_DPC 0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */ -#define CCR1_TCS 0x00000080 /* Timer Clock Select */ - -/* Bit definitions for the MCSR. */ -#ifdef CONFIG_4xx -#define MCSR_MCS 0x80000000 /* Machine Check Summary */ -#define MCSR_IB 0x40000000 /* Instruction PLB Error */ -#define MCSR_DRB 0x20000000 /* Data Read PLB Error */ -#define MCSR_DWB 0x10000000 /* Data Write PLB Error */ -#define MCSR_TLBP 0x08000000 /* TLB Parity Error */ -#define MCSR_ICP 0x04000000 /* I-Cache Parity Error */ -#define MCSR_DCSP 0x02000000 /* D-Cache Search Parity Error */ -#define MCSR_DCFP 0x01000000 /* D-Cache Flush Parity Error */ -#define MCSR_IMPE 0x00800000 /* Imprecise Machine Check Exception */ -#endif - -/* Bit definitions for the DBSR. */ -/* - * DBSR bits which have conflicting definitions on true Book E versus IBM 40x. - */ -#ifdef CONFIG_BOOKE -#define DBSR_IC 0x08000000 /* Instruction Completion */ -#define DBSR_BT 0x04000000 /* Branch Taken */ -#define DBSR_TIE 0x01000000 /* Trap Instruction Event */ -#define DBSR_IAC1 0x00800000 /* Instr Address Compare 1 Event */ -#define DBSR_IAC2 0x00400000 /* Instr Address Compare 2 Event */ -#define DBSR_IAC3 0x00200000 /* Instr Address Compare 3 Event */ -#define DBSR_IAC4 0x00100000 /* Instr Address Compare 4 Event */ -#define DBSR_DAC1R 0x00080000 /* Data Addr Compare 1 Read Event */ -#define DBSR_DAC1W 0x00040000 /* Data Addr Compare 1 Write Event */ -#define DBSR_DAC2R 0x00020000 /* Data Addr Compare 2 Read Event */ -#define DBSR_DAC2W 0x00010000 /* Data Addr Compare 2 Write Event */ -#endif -#ifdef CONFIG_40x -#define DBSR_IC 0x80000000 /* Instruction Completion */ -#define DBSR_BT 0x40000000 /* Branch taken */ -#define DBSR_TIE 0x10000000 /* Trap Instruction debug Event */ -#define DBSR_IAC1 0x04000000 /* Instruction Address Compare 1 Event */ -#define DBSR_IAC2 0x02000000 /* Instruction Address Compare 2 Event */ -#define DBSR_IAC3 0x00080000 /* Instruction Address Compare 3 Event */ -#define DBSR_IAC4 0x00040000 /* Instruction Address Compare 4 Event */ -#define DBSR_DAC1R 0x01000000 /* Data Address Compare 1 Read Event */ -#define DBSR_DAC1W 0x00800000 /* Data Address Compare 1 Write Event */ -#define DBSR_DAC2R 0x00400000 /* Data Address Compare 2 Read Event */ -#define DBSR_DAC2W 0x00200000 /* Data Address Compare 2 Write Event */ -#endif - -/* Bit definitions related to the ESR. */ -#define ESR_MCI 0x80000000 /* Machine Check - Instruction */ -#define ESR_IMCP 0x80000000 /* Instr. Machine Check - Protection */ -#define ESR_IMCN 0x40000000 /* Instr. Machine Check - Non-config */ -#define ESR_IMCB 0x20000000 /* Instr. Machine Check - Bus error */ -#define ESR_IMCT 0x10000000 /* Instr. Machine Check - Timeout */ -#define ESR_PIL 0x08000000 /* Program Exception - Illegal */ -#define ESR_PPR 0x04000000 /* Program Exception - Privileged */ -#define ESR_PTR 0x02000000 /* Program Exception - Trap */ -#define ESR_FP 0x01000000 /* Floating Point Operation */ -#define ESR_DST 0x00800000 /* Storage Exception - Data miss */ -#define ESR_DIZ 0x00400000 /* Storage Exception - Zone fault */ -#define ESR_ST 0x00800000 /* Store Operation */ -#define ESR_DLK 0x00200000 /* Data Cache Locking */ -#define ESR_ILK 0x00100000 /* Instr. Cache Locking */ -#define ESR_PUO 0x00040000 /* Unimplemented Operation exception */ -#define ESR_BO 0x00020000 /* Byte Ordering */ - -/* Bit definitions related to the DBCR0. */ -#define DBCR0_EDM 0x80000000 /* External Debug Mode */ -#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */ -#define DBCR0_RST 0x30000000 /* all the bits in the RST field */ -#define DBCR0_RST_SYSTEM 0x30000000 /* System Reset */ -#define DBCR0_RST_CHIP 0x20000000 /* Chip Reset */ -#define DBCR0_RST_CORE 0x10000000 /* Core Reset */ -#define DBCR0_RST_NONE 0x00000000 /* No Reset */ -#define DBCR0_IC 0x08000000 /* Instruction Completion */ -#define DBCR0_BT 0x04000000 /* Branch Taken */ -#define DBCR0_EDE 0x02000000 /* Exception Debug Event */ -#define DBCR0_TDE 0x01000000 /* TRAP Debug Event */ -#define DBCR0_IA1 0x00800000 /* Instr Addr compare 1 enable */ -#define DBCR0_IA2 0x00400000 /* Instr Addr compare 2 enable */ -#define DBCR0_IA12 0x00200000 /* Instr Addr 1-2 range enable */ -#define DBCR0_IA12X 0x00100000 /* Instr Addr 1-2 range eXclusive */ -#define DBCR0_IA3 0x00080000 /* Instr Addr compare 3 enable */ -#define DBCR0_IA4 0x00040000 /* Instr Addr compare 4 enable */ -#define DBCR0_IA34 0x00020000 /* Instr Addr 3-4 range Enable */ -#define DBCR0_IA34X 0x00010000 /* Instr Addr 3-4 range eXclusive */ -#define DBCR0_IA12T 0x00008000 /* Instr Addr 1-2 range Toggle */ -#define DBCR0_IA34T 0x00004000 /* Instr Addr 3-4 range Toggle */ -#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ - -/* Bit definitions related to the TCR. */ -#define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */ -#define TCR_WP_MASK TCR_WP(3) -#define WP_2_17 0 /* 2^17 clocks */ -#define WP_2_21 1 /* 2^21 clocks */ -#define WP_2_25 2 /* 2^25 clocks */ -#define WP_2_29 3 /* 2^29 clocks */ -#define TCR_WRC(x) (((x)&0x3)<<28) /* WDT Reset Control */ -#define TCR_WRC_MASK TCR_WRC(3) -#define WRC_NONE 0 /* No reset will occur */ -#define WRC_CORE 1 /* Core reset will occur */ -#define WRC_CHIP 2 /* Chip reset will occur */ -#define WRC_SYSTEM 3 /* System reset will occur */ -#define TCR_WIE 0x08000000 /* WDT Interrupt Enable */ -#define TCR_PIE 0x04000000 /* PIT Interrupt Enable */ -#define TCR_DIE TCR_PIE /* DEC Interrupt Enable */ -#define TCR_FP(x) (((x)&0x3)<<24) /* FIT Period */ -#define TCR_FP_MASK TCR_FP(3) -#define FP_2_9 0 /* 2^9 clocks */ -#define FP_2_13 1 /* 2^13 clocks */ -#define FP_2_17 2 /* 2^17 clocks */ -#define FP_2_21 3 /* 2^21 clocks */ -#define TCR_FIE 0x00800000 /* FIT Interrupt Enable */ -#define TCR_ARE 0x00400000 /* Auto Reload Enable */ - -/* Bit definitions for the TSR. */ -#define TSR_ENW 0x80000000 /* Enable Next Watchdog */ -#define TSR_WIS 0x40000000 /* WDT Interrupt Status */ -#define TSR_WRS(x) (((x)&0x3)<<28) /* WDT Reset Status */ -#define WRS_NONE 0 /* No WDT reset occurred */ -#define WRS_CORE 1 /* WDT forced core reset */ -#define WRS_CHIP 2 /* WDT forced chip reset */ -#define WRS_SYSTEM 3 /* WDT forced system reset */ -#define TSR_PIS 0x08000000 /* PIT Interrupt Status */ -#define TSR_DIS TSR_PIS /* DEC Interrupt Status */ -#define TSR_FIS 0x04000000 /* FIT Interrupt Status */ - -/* Bit definitions for the DCCR. */ -#define DCCR_NOCACHE 0 /* Noncacheable */ -#define DCCR_CACHE 1 /* Cacheable */ - -/* Bit definitions for DCWR. */ -#define DCWR_COPY 0 /* Copy-back */ -#define DCWR_WRITE 1 /* Write-through */ - -/* Bit definitions for ICCR. */ -#define ICCR_NOCACHE 0 /* Noncacheable */ -#define ICCR_CACHE 1 /* Cacheable */ - -/* Bit definitions for L1CSR0. */ -#define L1CSR0_CLFC 0x00000100 /* Cache Lock Bits Flash Clear */ -#define L1CSR0_DCFI 0x00000002 /* Data Cache Flash Invalidate */ -#define L1CSR0_CFI 0x00000002 /* Cache Flash Invalidate */ -#define L1CSR0_DCE 0x00000001 /* Data Cache Enable */ - -/* Bit definitions for L1CSR1. */ -#define L1CSR1_ICLFR 0x00000100 /* Instr Cache Lock Bits Flash Reset */ -#define L1CSR1_ICFI 0x00000002 /* Instr Cache Flash Invalidate */ -#define L1CSR1_ICE 0x00000001 /* Instr Cache Enable */ - -/* Bit definitions for SGR. */ -#define SGR_NORMAL 0 /* Speculative fetching allowed. */ -#define SGR_GUARDED 1 /* Speculative fetching disallowed. */ - -/* Bit definitions for SPEFSCR. */ -#define SPEFSCR_SOVH 0x80000000 /* Summary integer overflow high */ -#define SPEFSCR_OVH 0x40000000 /* Integer overflow high */ -#define SPEFSCR_FGH 0x20000000 /* Embedded FP guard bit high */ -#define SPEFSCR_FXH 0x10000000 /* Embedded FP sticky bit high */ -#define SPEFSCR_FINVH 0x08000000 /* Embedded FP invalid operation high */ -#define SPEFSCR_FDBZH 0x04000000 /* Embedded FP div by zero high */ -#define SPEFSCR_FUNFH 0x02000000 /* Embedded FP underflow high */ -#define SPEFSCR_FOVFH 0x01000000 /* Embedded FP overflow high */ -#define SPEFSCR_FINXS 0x00200000 /* Embedded FP inexact sticky */ -#define SPEFSCR_FINVS 0x00100000 /* Embedded FP invalid op. sticky */ -#define SPEFSCR_FDBZS 0x00080000 /* Embedded FP div by zero sticky */ -#define SPEFSCR_FUNFS 0x00040000 /* Embedded FP underflow sticky */ -#define SPEFSCR_FOVFS 0x00020000 /* Embedded FP overflow sticky */ -#define SPEFSCR_MODE 0x00010000 /* Embedded FP mode */ -#define SPEFSCR_SOV 0x00008000 /* Integer summary overflow */ -#define SPEFSCR_OV 0x00004000 /* Integer overflow */ -#define SPEFSCR_FG 0x00002000 /* Embedded FP guard bit */ -#define SPEFSCR_FX 0x00001000 /* Embedded FP sticky bit */ -#define SPEFSCR_FINV 0x00000800 /* Embedded FP invalid operation */ -#define SPEFSCR_FDBZ 0x00000400 /* Embedded FP div by zero */ -#define SPEFSCR_FUNF 0x00000200 /* Embedded FP underflow */ -#define SPEFSCR_FOVF 0x00000100 /* Embedded FP overflow */ -#define SPEFSCR_FINXE 0x00000040 /* Embedded FP inexact enable */ -#define SPEFSCR_FINVE 0x00000020 /* Embedded FP invalid op. enable */ -#define SPEFSCR_FDBZE 0x00000010 /* Embedded FP div by zero enable */ -#define SPEFSCR_FUNFE 0x00000008 /* Embedded FP underflow enable */ -#define SPEFSCR_FOVFE 0x00000004 /* Embedded FP overflow enable */ -#define SPEFSCR_FRMC 0x00000003 /* Embedded FP rounding mode control */ - -/* - * The IBM-403 is an even more odd special case, as it is much - * older than the IBM-405 series. We put these down here incase someone - * wishes to support these machines again. - */ -#ifdef CONFIG_403GCX -/* Special Purpose Registers (SPRNs)*/ -#define SPRN_TBHU 0x3CC /* Time Base High User-mode */ -#define SPRN_TBLU 0x3CD /* Time Base Low User-mode */ -#define SPRN_CDBCR 0x3D7 /* Cache Debug Control Register */ -#define SPRN_TBHI 0x3DC /* Time Base High */ -#define SPRN_TBLO 0x3DD /* Time Base Low */ -#define SPRN_DBCR 0x3F2 /* Debug Control Regsiter */ -#define SPRN_PBL1 0x3FC /* Protection Bound Lower 1 */ -#define SPRN_PBL2 0x3FE /* Protection Bound Lower 2 */ -#define SPRN_PBU1 0x3FD /* Protection Bound Upper 1 */ -#define SPRN_PBU2 0x3FF /* Protection Bound Upper 2 */ - - -/* Bit definitions for the DBCR. */ -#define DBCR_EDM DBCR0_EDM -#define DBCR_IDM DBCR0_IDM -#define DBCR_RST(x) (((x) & 0x3) << 28) -#define DBCR_RST_NONE 0 -#define DBCR_RST_CORE 1 -#define DBCR_RST_CHIP 2 -#define DBCR_RST_SYSTEM 3 -#define DBCR_IC DBCR0_IC /* Instruction Completion Debug Evnt */ -#define DBCR_BT DBCR0_BT /* Branch Taken Debug Event */ -#define DBCR_EDE DBCR0_EDE /* Exception Debug Event */ -#define DBCR_TDE DBCR0_TDE /* TRAP Debug Event */ -#define DBCR_FER 0x00F80000 /* First Events Remaining Mask */ -#define DBCR_FT 0x00040000 /* Freeze Timers on Debug Event */ -#define DBCR_IA1 0x00020000 /* Instr. Addr. Compare 1 Enable */ -#define DBCR_IA2 0x00010000 /* Instr. Addr. Compare 2 Enable */ -#define DBCR_D1R 0x00008000 /* Data Addr. Compare 1 Read Enable */ -#define DBCR_D1W 0x00004000 /* Data Addr. Compare 1 Write Enable */ -#define DBCR_D1S(x) (((x) & 0x3) << 12) /* Data Adrr. Compare 1 Size */ -#define DAC_BYTE 0 -#define DAC_HALF 1 -#define DAC_WORD 2 -#define DAC_QUAD 3 -#define DBCR_D2R 0x00000800 /* Data Addr. Compare 2 Read Enable */ -#define DBCR_D2W 0x00000400 /* Data Addr. Compare 2 Write Enable */ -#define DBCR_D2S(x) (((x) & 0x3) << 8) /* Data Addr. Compare 2 Size */ -#define DBCR_SBT 0x00000040 /* Second Branch Taken Debug Event */ -#define DBCR_SED 0x00000020 /* Second Exception Debug Event */ -#define DBCR_STD 0x00000010 /* Second Trap Debug Event */ -#define DBCR_SIA 0x00000008 /* Second IAC Enable */ -#define DBCR_SDA 0x00000004 /* Second DAC Enable */ -#define DBCR_JOI 0x00000002 /* JTAG Serial Outbound Int. Enable */ -#define DBCR_JII 0x00000001 /* JTAG Serial Inbound Int. Enable */ -#endif /* 403GCX */ -#endif /* __ASM_PPC_REG_BOOKE_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/residual.h b/include/asm-ppc/residual.h deleted file mode 100644 index 934810d25667..000000000000 --- a/include/asm-ppc/residual.h +++ /dev/null @@ -1,350 +0,0 @@ -/* 7/18/95 */ -/*----------------------------------------------------------------------------*/ -/* Residual Data header definitions and prototypes */ -/*----------------------------------------------------------------------------*/ - -/* Structure map for RESIDUAL on PowerPC Reference Platform */ -/* residual.h - Residual data structure passed in r3. */ -/* Load point passed in r4 to boot image. */ -/* For enum's: if given in hex then they are bit significant, */ -/* i.e. only one bit is on for each enum */ -/* Reserved fields must be filled with zeros. */ - -#ifdef __KERNEL__ -#ifndef _RESIDUAL_ -#define _RESIDUAL_ - -#ifndef __ASSEMBLY__ - -#define MAX_CPUS 32 /* These should be set to the maximum */ -#define MAX_MEMS 64 /* number possible for this system. */ -#define MAX_DEVICES 256 /* Changing these will change the */ -#define AVE_PNP_SIZE 32 /* structure, hence the version of */ -#define MAX_MEM_SEGS 64 /* this header file. */ - -/*----------------------------------------------------------------------------*/ -/* Public structures... */ -/*----------------------------------------------------------------------------*/ - -#include <asm/pnp.h> - -typedef enum _L1CACHE_TYPE { - NoneCAC = 0, - SplitCAC = 1, - CombinedCAC = 2 - } L1CACHE_TYPE; - -typedef enum _TLB_TYPE { - NoneTLB = 0, - SplitTLB = 1, - CombinedTLB = 2 - } TLB_TYPE; - -typedef enum _FIRMWARE_SUPPORT { - Conventional = 0x01, - OpenFirmware = 0x02, - Diagnostics = 0x04, - LowDebug = 0x08, - Multiboot = 0x10, - LowClient = 0x20, - Hex41 = 0x40, - FAT = 0x80, - ISO9660 = 0x0100, - SCSI_InitiatorID_Override = 0x0200, - Tape_Boot = 0x0400, - FW_Boot_Path = 0x0800 - } FIRMWARE_SUPPORT; - -typedef enum _FIRMWARE_SUPPLIERS { - IBMFirmware = 0x00, - MotoFirmware = 0x01, /* 7/18/95 */ - FirmWorks = 0x02, /* 10/5/95 */ - Bull = 0x03, /* 04/03/96 */ - } FIRMWARE_SUPPLIERS; - -typedef enum _ENDIAN_SWITCH_METHODS { - UsePort92 = 0x01, - UsePCIConfigA8 = 0x02, - UseFF001030 = 0x03, - } ENDIAN_SWITCH_METHODS; - -typedef enum _SPREAD_IO_METHODS { - UsePort850 = 0x00, -/*UsePCIConfigA8 = 0x02,*/ - } SPREAD_IO_METHODS; - -typedef struct _VPD { - - /* Box dependent stuff */ - unsigned char PrintableModel[32]; /* Null terminated string. - Must be of the form: - vvv,<20h>,<model designation>,<0x0> - where vvv is the vendor ID - e.g. IBM PPS MODEL 6015<0x0> */ - unsigned char Serial[16]; /* 12/94: - Serial Number; must be of the form: - vvv<serial number> where vvv is the - vendor ID. - e.g. IBM60151234567<20h><20h> */ - unsigned char Reserved[48]; - unsigned long FirmwareSupplier; /* See FirmwareSuppliers enum */ - unsigned long FirmwareSupports; /* See FirmwareSupport enum */ - unsigned long NvramSize; /* Size of nvram in bytes */ - unsigned long NumSIMMSlots; - unsigned short EndianSwitchMethod; /* See EndianSwitchMethods enum */ - unsigned short SpreadIOMethod; /* See SpreadIOMethods enum */ - unsigned long SmpIar; - unsigned long RAMErrLogOffset; /* Heap offset to error log */ - unsigned long Reserved5; - unsigned long Reserved6; - unsigned long ProcessorHz; /* Processor clock frequency in Hertz */ - unsigned long ProcessorBusHz; /* Processor bus clock frequency */ - unsigned long Reserved7; - unsigned long TimeBaseDivisor; /* (Bus clocks per timebase tic)*1000 */ - unsigned long WordWidth; /* Word width in bits */ - unsigned long PageSize; /* Page size in bytes */ - unsigned long CoherenceBlockSize; /* Unit of transfer in/out of cache - for which coherency is maintained; - normally <= CacheLineSize. */ - unsigned long GranuleSize; /* Unit of lock allocation to avoid */ - /* false sharing of locks. */ - - /* L1 Cache variables */ - unsigned long CacheSize; /* L1 Cache size in KB. This is the */ - /* total size of the L1, whether */ - /* combined or split */ - unsigned long CacheAttrib; /* L1CACHE_TYPE */ - unsigned long CacheAssoc; /* L1 Cache associativity. Use this - for combined cache. If split, put - zeros here. */ - unsigned long CacheLineSize; /* L1 Cache line size in bytes. Use - for combined cache. If split, put - zeros here. */ - /* For split L1 Cache: (= combined if combined cache) */ - unsigned long I_CacheSize; - unsigned long I_CacheAssoc; - unsigned long I_CacheLineSize; - unsigned long D_CacheSize; - unsigned long D_CacheAssoc; - unsigned long D_CacheLineSize; - - /* Translation Lookaside Buffer variables */ - unsigned long TLBSize; /* Total number of TLBs on the system */ - unsigned long TLBAttrib; /* Combined I+D or split TLB */ - unsigned long TLBAssoc; /* TLB Associativity. Use this for - combined TLB. If split, put zeros - here. */ - /* For split TLB: (= combined if combined TLB) */ - unsigned long I_TLBSize; - unsigned long I_TLBAssoc; - unsigned long D_TLBSize; - unsigned long D_TLBAssoc; - - unsigned long ExtendedVPD; /* Offset to extended VPD area; - null if unused */ - } VPD; - -typedef enum _DEVICE_FLAGS { - Enabled = 0x4000, /* 1 - PCI device is enabled */ - Integrated = 0x2000, - Failed = 0x1000, /* 1 - device failed POST code tests */ - Static = 0x0800, /* 0 - dynamically configurable - 1 - static */ - Dock = 0x0400, /* 0 - not a docking station device - 1 - is a docking station device */ - Boot = 0x0200, /* 0 - device cannot be used for BOOT - 1 - can be a BOOT device */ - Configurable = 0x0100, /* 1 - device is configurable */ - Disableable = 0x80, /* 1 - device can be disabled */ - PowerManaged = 0x40, /* 0 - not managed; 1 - managed */ - ReadOnly = 0x20, /* 1 - device is read only */ - Removable = 0x10, /* 1 - device is removable */ - ConsoleIn = 0x08, - ConsoleOut = 0x04, - Input = 0x02, - Output = 0x01 - } DEVICE_FLAGS; - -typedef enum _BUS_ID { - ISADEVICE = 0x01, - EISADEVICE = 0x02, - PCIDEVICE = 0x04, - PCMCIADEVICE = 0x08, - PNPISADEVICE = 0x10, - MCADEVICE = 0x20, - MXDEVICE = 0x40, /* Devices on mezzanine bus */ - PROCESSORDEVICE = 0x80, /* Devices on processor bus */ - VMEDEVICE = 0x100, - } BUS_ID; - -typedef struct _DEVICE_ID { - unsigned long BusId; /* See BUS_ID enum above */ - unsigned long DevId; /* Big Endian format */ - unsigned long SerialNum; /* For multiple usage of a single - DevId */ - unsigned long Flags; /* See DEVICE_FLAGS enum above */ - unsigned char BaseType; /* See pnp.h for bit definitions */ - unsigned char SubType; /* See pnp.h for bit definitions */ - unsigned char Interface; /* See pnp.h for bit definitions */ - unsigned char Spare; - } DEVICE_ID; - -typedef union _BUS_ACCESS { - struct _PnPAccess{ - unsigned char CSN; - unsigned char LogicalDevNumber; - unsigned short ReadDataPort; - } PnPAccess; - struct _ISAAccess{ - unsigned char SlotNumber; /* ISA Slot Number generally not - available; 0 if unknown */ - unsigned char LogicalDevNumber; - unsigned short ISAReserved; - } ISAAccess; - struct _MCAAccess{ - unsigned char SlotNumber; - unsigned char LogicalDevNumber; - unsigned short MCAReserved; - } MCAAccess; - struct _PCMCIAAccess{ - unsigned char SlotNumber; - unsigned char LogicalDevNumber; - unsigned short PCMCIAReserved; - } PCMCIAAccess; - struct _EISAAccess{ - unsigned char SlotNumber; - unsigned char FunctionNumber; - unsigned short EISAReserved; - } EISAAccess; - struct _PCIAccess{ - unsigned char BusNumber; - unsigned char DevFuncNumber; - unsigned short PCIReserved; - } PCIAccess; - struct _ProcBusAccess{ - unsigned char BusNumber; - unsigned char BUID; - unsigned short ProcBusReserved; - } ProcBusAccess; - } BUS_ACCESS; - -/* Per logical device information */ -typedef struct _PPC_DEVICE { - DEVICE_ID DeviceId; - BUS_ACCESS BusAccess; - - /* The following three are offsets into the DevicePnPHeap */ - /* All are in PnP compressed format */ - unsigned long AllocatedOffset; /* Allocated resource description */ - unsigned long PossibleOffset; /* Possible resource description */ - unsigned long CompatibleOffset; /* Compatible device identifiers */ - } PPC_DEVICE; - -typedef enum _CPU_STATE { - CPU_GOOD = 0, /* CPU is present, and active */ - CPU_GOOD_FW = 1, /* CPU is present, and in firmware */ - CPU_OFF = 2, /* CPU is present, but inactive */ - CPU_FAILED = 3, /* CPU is present, but failed POST */ - CPU_NOT_PRESENT = 255 /* CPU not present */ - } CPU_STATE; - -typedef struct _PPC_CPU { - unsigned long CpuType; /* Result of mfspr from Processor - Version Register (PVR). - PVR(0-15) = Version (e.g. 601) - PVR(16-31 = EC Level */ - unsigned char CpuNumber; /* CPU Number for this processor */ - unsigned char CpuState; /* CPU State, see CPU_STATE enum */ - unsigned short Reserved; - } PPC_CPU; - -typedef struct _PPC_MEM { - unsigned long SIMMSize; /* 0 - absent or bad - 8M, 32M (in MB) */ - } PPC_MEM; - -typedef enum _MEM_USAGE { - Other = 0x8000, - ResumeBlock = 0x4000, /* for use by power management */ - SystemROM = 0x2000, /* Flash memory (populated) */ - UnPopSystemROM = 0x1000, /* Unpopulated part of SystemROM area */ - IOMemory = 0x0800, - SystemIO = 0x0400, - SystemRegs = 0x0200, - PCIAddr = 0x0100, - PCIConfig = 0x80, - ISAAddr = 0x40, - Unpopulated = 0x20, /* Unpopulated part of System Memory */ - Free = 0x10, /* Free part of System Memory */ - BootImage = 0x08, /* BootImage part of System Memory */ - FirmwareCode = 0x04, /* FirmwareCode part of System Memory */ - FirmwareHeap = 0x02, /* FirmwareHeap part of System Memory */ - FirmwareStack = 0x01 /* FirmwareStack part of System Memory*/ - } MEM_USAGE; - -typedef struct _MEM_MAP { - unsigned long Usage; /* See MEM_USAGE above */ - unsigned long BasePage; /* Page number measured in 4KB pages */ - unsigned long PageCount; /* Page count measured in 4KB pages */ - } MEM_MAP; - -typedef struct _RESIDUAL { - unsigned long ResidualLength; /* Length of Residual */ - unsigned char Version; /* of this data structure */ - unsigned char Revision; /* of this data structure */ - unsigned short EC; /* of this data structure */ - /* VPD */ - VPD VitalProductData; - /* CPU */ - unsigned short MaxNumCpus; /* Max CPUs in this system */ - unsigned short ActualNumCpus; /* ActualNumCpus < MaxNumCpus means */ - /* that there are unpopulated or */ - /* otherwise unusable cpu locations */ - PPC_CPU Cpus[MAX_CPUS]; - /* Memory */ - unsigned long TotalMemory; /* Total amount of memory installed */ - unsigned long GoodMemory; /* Total amount of good memory */ - unsigned long ActualNumMemSegs; - MEM_MAP Segs[MAX_MEM_SEGS]; - unsigned long ActualNumMemories; - PPC_MEM Memories[MAX_MEMS]; - /* Devices */ - unsigned long ActualNumDevices; - PPC_DEVICE Devices[MAX_DEVICES]; - unsigned char DevicePnPHeap[2*MAX_DEVICES*AVE_PNP_SIZE]; - } RESIDUAL; - - -/* - * Forward declaration - we can't include <linux/pci.h> because it - * breaks the boot loader - */ -struct pci_dev; - -extern RESIDUAL *res; -extern void print_residual_device_info(void); -extern PPC_DEVICE *residual_find_device(unsigned long BusMask, - unsigned char * DevID, int BaseType, - int SubType, int Interface, int n); -extern int residual_pcidev_irq(struct pci_dev *dev); -extern void residual_irq_mask(char *irq_edge_mask_lo, char *irq_edge_mask_hi); -extern unsigned int residual_isapic_addr(void); -extern PnP_TAG_PACKET *PnP_find_packet(unsigned char *p, unsigned packet_tag, - int n); -extern PnP_TAG_PACKET *PnP_find_small_vendor_packet(unsigned char *p, - unsigned packet_type, - int n); -extern PnP_TAG_PACKET *PnP_find_large_vendor_packet(unsigned char *p, - unsigned packet_type, - int n); - -#ifdef CONFIG_PREP_RESIDUAL -#define have_residual_data (res && res->ResidualLength) -#else -#define have_residual_data 0 -#endif - -#endif /* __ASSEMBLY__ */ -#endif /* ndef _RESIDUAL_ */ - -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/rtc.h b/include/asm-ppc/rtc.h deleted file mode 100644 index 6025b46d0a2a..000000000000 --- a/include/asm-ppc/rtc.h +++ /dev/null @@ -1,95 +0,0 @@ -/* - * include/asm-ppc/rtc.h - * - * Author: Tom Rini <trini@mvista.com> - * - * 2002 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Based on: - * include/asm-m68k/rtc.h - * - * Copyright Richard Zidlicky - * implementation details for genrtc/q40rtc driver - * - * And the old drivers/macintosh/rtc.c which was heavily based on: - * Linux/SPARC Real Time Clock Driver - * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu) - * - * With additional work by Paul Mackerras and Franz Sirl. - */ - -#ifndef __ASM_RTC_H__ -#define __ASM_RTC_H__ - -#ifdef __KERNEL__ - -#include <linux/rtc.h> - -#include <asm/machdep.h> -#include <asm/time.h> - -#define RTC_PIE 0x40 /* periodic interrupt enable */ -#define RTC_AIE 0x20 /* alarm interrupt enable */ -#define RTC_UIE 0x10 /* update-finished interrupt enable */ - -/* some dummy definitions */ -#define RTC_BATT_BAD 0x100 /* battery bad */ -#define RTC_SQWE 0x08 /* enable square-wave output */ -#define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */ -#define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */ -#define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */ - -static inline unsigned int get_rtc_time(struct rtc_time *time) -{ - if (ppc_md.get_rtc_time) { - unsigned long nowtime; - - nowtime = (ppc_md.get_rtc_time)(); - - to_tm(nowtime, time); - - time->tm_year -= 1900; - time->tm_mon -= 1; /* Make sure userland has a 0-based month */ - } - return RTC_24H; -} - -/* Set the current date and time in the real time clock. */ -static inline int set_rtc_time(struct rtc_time *time) -{ - if (ppc_md.get_rtc_time) { - unsigned long nowtime; - - nowtime = mktime(time->tm_year+1900, time->tm_mon+1, - time->tm_mday, time->tm_hour, time->tm_min, - time->tm_sec); - - (ppc_md.set_rtc_time)(nowtime); - - return 0; - } else - return -EINVAL; -} - -static inline unsigned int get_rtc_ss(void) -{ - struct rtc_time h; - - get_rtc_time(&h); - return h.tm_sec; -} - -static inline int get_rtc_pll(struct rtc_pll_info *pll) -{ - return -EINVAL; -} -static inline int set_rtc_pll(struct rtc_pll_info *pll) -{ - return -EINVAL; -} - -#endif /* __KERNEL__ */ -#endif /* __ASM_RTC_H__ */ diff --git a/include/asm-ppc/serial.h b/include/asm-ppc/serial.h deleted file mode 100644 index d35ed10315b1..000000000000 --- a/include/asm-ppc/serial.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * include/asm-ppc/serial.h - */ - -#ifdef __KERNEL__ -#ifndef __ASM_SERIAL_H__ -#define __ASM_SERIAL_H__ - - -#if defined(CONFIG_EV64260) -#include <platforms/ev64260.h> -#elif defined(CONFIG_CHESTNUT) -#include <platforms/chestnut.h> -#elif defined(CONFIG_POWERPMC250) -#include <platforms/powerpmc250.h> -#elif defined(CONFIG_LOPEC) -#include <platforms/lopec.h> -#elif defined(CONFIG_MVME5100) -#include <platforms/mvme5100.h> -#elif defined(CONFIG_PAL4) -#include <platforms/pal4_serial.h> -#elif defined(CONFIG_PRPMC750) -#include <platforms/prpmc750.h> -#elif defined(CONFIG_PRPMC800) -#include <platforms/prpmc800.h> -#elif defined(CONFIG_SANDPOINT) -#include <platforms/sandpoint.h> -#elif defined(CONFIG_SPRUCE) -#include <platforms/spruce.h> -#elif defined(CONFIG_4xx) -#include <asm/ibm4xx.h> -#elif defined(CONFIG_RADSTONE_PPC7D) -#include <platforms/radstone_ppc7d.h> -#else - -/* - * XXX Assume it has PC-style ISA serial ports - true for PReP at least. - */ -#include <asm/pc_serial.h> - -#endif /* !CONFIG_GEMINI and others */ -#endif /* __ASM_SERIAL_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/smp.h b/include/asm-ppc/smp.h deleted file mode 100644 index e75791ea33a6..000000000000 --- a/include/asm-ppc/smp.h +++ /dev/null @@ -1,75 +0,0 @@ -/* smp.h: PPC specific SMP stuff. - * - * Original was a copy of sparc smp.h. Now heavily modified - * for PPC. - * - * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) - * Copyright (C) 1996-2001 Cort Dougan <cort@fsmlabs.com> - */ -#ifdef __KERNEL__ -#ifndef _PPC_SMP_H -#define _PPC_SMP_H - -#include <linux/kernel.h> -#include <linux/bitops.h> -#include <linux/errno.h> -#include <linux/cpumask.h> -#include <linux/threads.h> - -#ifdef CONFIG_SMP - -#ifndef __ASSEMBLY__ - -struct cpuinfo_PPC { - unsigned long loops_per_jiffy; - unsigned long pvr; - unsigned long *pgd_cache; - unsigned long *pte_cache; - unsigned long pgtable_cache_sz; -}; - -extern struct cpuinfo_PPC cpu_data[]; -extern cpumask_t cpu_online_map; -extern cpumask_t cpu_possible_map; -extern unsigned long smp_proc_in_lock[]; -extern volatile unsigned long cpu_callin_map[]; -extern int smp_tb_synchronized; -extern struct smp_ops_t *smp_ops; - -extern void smp_send_tlb_invalidate(int); -extern void smp_send_xmon_break(int cpu); -struct pt_regs; -extern void smp_message_recv(int); - -extern int __cpu_disable(void); -extern void __cpu_die(unsigned int cpu); -extern void cpu_die(void) __attribute__((noreturn)); - -#define raw_smp_processor_id() (current_thread_info()->cpu) - -extern int __cpu_up(unsigned int cpu); - -extern int smp_hw_index[]; -#define hard_smp_processor_id() (smp_hw_index[smp_processor_id()]) -#define get_hard_smp_processor_id(cpu) (smp_hw_index[(cpu)]) -#define set_hard_smp_processor_id(cpu, phys)\ - (smp_hw_index[(cpu)] = (phys)) - -#endif /* __ASSEMBLY__ */ - -#else /* !(CONFIG_SMP) */ - -static inline void cpu_die(void) { } -#define get_hard_smp_processor_id(cpu) 0 -#define set_hard_smp_processor_id(cpu, phys) -#define hard_smp_processor_id() 0 - -#endif /* !(CONFIG_SMP) */ - -#ifndef __ASSEMBLY__ -extern int boot_cpuid; -extern int boot_cpuid_phys; -#endif - -#endif /* !(_PPC_SMP_H) */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/spinlock.h b/include/asm-ppc/spinlock.h deleted file mode 100644 index fccaf5531e57..000000000000 --- a/include/asm-ppc/spinlock.h +++ /dev/null @@ -1,168 +0,0 @@ -#ifndef __ASM_SPINLOCK_H -#define __ASM_SPINLOCK_H - -#include <asm/system.h> - -/* - * Simple spin lock operations. - * - * (the type definitions are in asm/raw_spinlock_types.h) - */ - -#define __raw_spin_is_locked(x) ((x)->slock != 0) -#define __raw_spin_unlock_wait(lock) \ - do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0) -#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock) - -static inline void __raw_spin_lock(raw_spinlock_t *lock) -{ - unsigned long tmp; - - __asm__ __volatile__( - "b 1f # __raw_spin_lock\n\ -2: lwzx %0,0,%1\n\ - cmpwi 0,%0,0\n\ - bne+ 2b\n\ -1: lwarx %0,0,%1\n\ - cmpwi 0,%0,0\n\ - bne- 2b\n" - PPC405_ERR77(0,%1) -" stwcx. %2,0,%1\n\ - bne- 2b\n\ - isync" - : "=&r"(tmp) - : "r"(&lock->slock), "r"(1) - : "cr0", "memory"); -} - -static inline void __raw_spin_unlock(raw_spinlock_t *lock) -{ - __asm__ __volatile__("eieio # __raw_spin_unlock": : :"memory"); - lock->slock = 0; -} - -#define __raw_spin_trylock(l) (!test_and_set_bit(0,(volatile unsigned long *)(&(l)->slock))) - -/* - * Read-write spinlocks, allowing multiple readers - * but only one writer. - * - * NOTE! it is quite common to have readers in interrupts - * but no interrupt writers. For those circumstances we - * can "mix" irq-safe locks - any writer needs to get a - * irq-safe write-lock, but readers can get non-irqsafe - * read-locks. - */ - -#define __raw_read_can_lock(rw) ((rw)->lock >= 0) -#define __raw_write_can_lock(rw) (!(rw)->lock) - -static __inline__ int __raw_read_trylock(raw_rwlock_t *rw) -{ - signed int tmp; - - __asm__ __volatile__( -"2: lwarx %0,0,%1 # read_trylock\n\ - addic. %0,%0,1\n\ - ble- 1f\n" - PPC405_ERR77(0,%1) -" stwcx. %0,0,%1\n\ - bne- 2b\n\ - isync\n\ -1:" - : "=&r"(tmp) - : "r"(&rw->lock) - : "cr0", "memory"); - - return tmp > 0; -} - -static __inline__ void __raw_read_lock(raw_rwlock_t *rw) -{ - signed int tmp; - - __asm__ __volatile__( - "b 2f # read_lock\n\ -1: lwzx %0,0,%1\n\ - cmpwi 0,%0,0\n\ - blt+ 1b\n\ -2: lwarx %0,0,%1\n\ - addic. %0,%0,1\n\ - ble- 1b\n" - PPC405_ERR77(0,%1) -" stwcx. %0,0,%1\n\ - bne- 2b\n\ - isync" - : "=&r"(tmp) - : "r"(&rw->lock) - : "cr0", "memory"); -} - -static __inline__ void __raw_read_unlock(raw_rwlock_t *rw) -{ - signed int tmp; - - __asm__ __volatile__( - "eieio # read_unlock\n\ -1: lwarx %0,0,%1\n\ - addic %0,%0,-1\n" - PPC405_ERR77(0,%1) -" stwcx. %0,0,%1\n\ - bne- 1b" - : "=&r"(tmp) - : "r"(&rw->lock) - : "cr0", "memory"); -} - -static __inline__ int __raw_write_trylock(raw_rwlock_t *rw) -{ - signed int tmp; - - __asm__ __volatile__( -"2: lwarx %0,0,%1 # write_trylock\n\ - cmpwi 0,%0,0\n\ - bne- 1f\n" - PPC405_ERR77(0,%1) -" stwcx. %2,0,%1\n\ - bne- 2b\n\ - isync\n\ -1:" - : "=&r"(tmp) - : "r"(&rw->lock), "r"(-1) - : "cr0", "memory"); - - return tmp == 0; -} - -static __inline__ void __raw_write_lock(raw_rwlock_t *rw) -{ - signed int tmp; - - __asm__ __volatile__( - "b 2f # write_lock\n\ -1: lwzx %0,0,%1\n\ - cmpwi 0,%0,0\n\ - bne+ 1b\n\ -2: lwarx %0,0,%1\n\ - cmpwi 0,%0,0\n\ - bne- 1b\n" - PPC405_ERR77(0,%1) -" stwcx. %2,0,%1\n\ - bne- 2b\n\ - isync" - : "=&r"(tmp) - : "r"(&rw->lock), "r"(-1) - : "cr0", "memory"); -} - -static __inline__ void __raw_write_unlock(raw_rwlock_t *rw) -{ - __asm__ __volatile__("eieio # write_unlock": : :"memory"); - rw->lock = 0; -} - -#define _raw_spin_relax(lock) cpu_relax() -#define _raw_read_relax(lock) cpu_relax() -#define _raw_write_relax(lock) cpu_relax() - -#endif /* __ASM_SPINLOCK_H */ diff --git a/include/asm-ppc/suspend.h b/include/asm-ppc/suspend.h deleted file mode 100644 index 3df9f32bd834..000000000000 --- a/include/asm-ppc/suspend.h +++ /dev/null @@ -1,12 +0,0 @@ -static inline int arch_prepare_suspend(void) -{ - return 0; -} - -static inline void save_processor_state(void) -{ -} - -static inline void restore_processor_state(void) -{ -} diff --git a/include/asm-ppc/system.h b/include/asm-ppc/system.h deleted file mode 100644 index 70ebd333c55b..000000000000 --- a/include/asm-ppc/system.h +++ /dev/null @@ -1,289 +0,0 @@ -/* - * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu> - */ -#ifndef __PPC_SYSTEM_H -#define __PPC_SYSTEM_H - -#include <linux/kernel.h> - -#include <asm/hw_irq.h> - -/* - * Memory barrier. - * The sync instruction guarantees that all memory accesses initiated - * by this processor have been performed (with respect to all other - * mechanisms that access memory). The eieio instruction is a barrier - * providing an ordering (separately) for (a) cacheable stores and (b) - * loads and stores to non-cacheable memory (e.g. I/O devices). - * - * mb() prevents loads and stores being reordered across this point. - * rmb() prevents loads being reordered across this point. - * wmb() prevents stores being reordered across this point. - * read_barrier_depends() prevents data-dependent loads being reordered - * across this point (nop on PPC). - * - * We can use the eieio instruction for wmb, but since it doesn't - * give any ordering guarantees about loads, we have to use the - * stronger but slower sync instruction for mb and rmb. - */ -#define mb() __asm__ __volatile__ ("sync" : : : "memory") -#define rmb() __asm__ __volatile__ ("sync" : : : "memory") -#define wmb() __asm__ __volatile__ ("eieio" : : : "memory") -#define read_barrier_depends() do { } while(0) - -#define set_mb(var, value) do { var = value; mb(); } while (0) - -#define AT_VECTOR_SIZE_ARCH 6 /* entries in ARCH_DLINFO */ -#ifdef CONFIG_SMP -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() __asm__ __volatile__ ("eieio" : : : "memory") -#define smp_read_barrier_depends() read_barrier_depends() -#else -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#define smp_read_barrier_depends() do { } while(0) -#endif /* CONFIG_SMP */ - -#ifdef __KERNEL__ -struct task_struct; -struct pt_regs; - -extern void print_backtrace(unsigned long *); -extern void show_regs(struct pt_regs * regs); -extern void flush_instruction_cache(void); -extern void hard_reset_now(void); -extern void poweroff_now(void); -extern int set_dabr(unsigned long dabr); -#ifdef CONFIG_6xx -extern long _get_L2CR(void); -extern long _get_L3CR(void); -extern void _set_L2CR(unsigned long); -extern void _set_L3CR(unsigned long); -#else -#define _get_L2CR() 0L -#define _get_L3CR() 0L -#define _set_L2CR(val) do { } while(0) -#define _set_L3CR(val) do { } while(0) -#endif -extern void via_cuda_init(void); -extern void pmac_nvram_init(void); -extern void chrp_nvram_init(void); -extern void read_rtc_time(void); -extern void pmac_find_display(void); -extern void giveup_fpu(struct task_struct *); -extern void disable_kernel_fp(void); -extern void enable_kernel_fp(void); -extern void flush_fp_to_thread(struct task_struct *); -extern void enable_kernel_altivec(void); -extern void giveup_altivec(struct task_struct *); -extern void load_up_altivec(struct task_struct *); -extern int emulate_altivec(struct pt_regs *); -extern void giveup_spe(struct task_struct *); -extern void load_up_spe(struct task_struct *); -extern int fix_alignment(struct pt_regs *); -extern void cvt_fd(float *from, double *to, struct thread_struct *thread); -extern void cvt_df(double *from, float *to, struct thread_struct *thread); - -#ifndef CONFIG_SMP -extern void discard_lazy_cpu_state(void); -#else -static inline void discard_lazy_cpu_state(void) -{ -} -#endif - -#ifdef CONFIG_ALTIVEC -extern void flush_altivec_to_thread(struct task_struct *); -#else -static inline void flush_altivec_to_thread(struct task_struct *t) -{ -} -#endif - -#ifdef CONFIG_SPE -extern void flush_spe_to_thread(struct task_struct *); -#else -static inline void flush_spe_to_thread(struct task_struct *t) -{ -} -#endif - -extern int call_rtas(const char *, int, int, unsigned long *, ...); -extern void cacheable_memzero(void *p, unsigned int nb); -extern void *cacheable_memcpy(void *, const void *, unsigned int); -extern int do_page_fault(struct pt_regs *, unsigned long, unsigned long); -extern void bad_page_fault(struct pt_regs *, unsigned long, int); -extern int die(const char *, struct pt_regs *, long); -extern void _exception(int, struct pt_regs *, int, unsigned long); -void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val); - -#ifdef CONFIG_BOOKE_WDT -extern u32 booke_wdt_enabled; -extern u32 booke_wdt_period; -#endif /* CONFIG_BOOKE_WDT */ - -struct device_node; -extern void note_scsi_host(struct device_node *, void *); - -extern struct task_struct *__switch_to(struct task_struct *, - struct task_struct *); -#define switch_to(prev, next, last) ((last) = __switch_to((prev), (next))) - -struct thread_struct; -extern struct task_struct *_switch(struct thread_struct *prev, - struct thread_struct *next); - -extern unsigned int rtas_data; - -static __inline__ unsigned long -xchg_u32(volatile void *p, unsigned long val) -{ - unsigned long prev; - - __asm__ __volatile__ ("\n\ -1: lwarx %0,0,%2 \n" - PPC405_ERR77(0,%2) -" stwcx. %3,0,%2 \n\ - bne- 1b" - : "=&r" (prev), "=m" (*(volatile unsigned long *)p) - : "r" (p), "r" (val), "m" (*(volatile unsigned long *)p) - : "cc", "memory"); - - return prev; -} - -/* - * This function doesn't exist, so you'll get a linker error - * if something tries to do an invalid xchg(). - */ -extern void __xchg_called_with_bad_pointer(void); - -#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) - -static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size) -{ - switch (size) { - case 4: - return (unsigned long) xchg_u32(ptr, x); -#if 0 /* xchg_u64 doesn't exist on 32-bit PPC */ - case 8: - return (unsigned long) xchg_u64(ptr, x); -#endif /* 0 */ - } - __xchg_called_with_bad_pointer(); - return x; - - -} - -static inline void * xchg_ptr(void * m, void * val) -{ - return (void *) xchg_u32(m, (unsigned long) val); -} - - -#define __HAVE_ARCH_CMPXCHG 1 - -static __inline__ unsigned long -__cmpxchg_u32(volatile unsigned int *p, unsigned int old, unsigned int new) -{ - unsigned int prev; - - __asm__ __volatile__ ("\n\ -1: lwarx %0,0,%2 \n\ - cmpw 0,%0,%3 \n\ - bne 2f \n" - PPC405_ERR77(0,%2) -" stwcx. %4,0,%2 \n\ - bne- 1b\n" -#ifdef CONFIG_SMP -" sync\n" -#endif /* CONFIG_SMP */ -"2:" - : "=&r" (prev), "=m" (*p) - : "r" (p), "r" (old), "r" (new), "m" (*p) - : "cc", "memory"); - - return prev; -} - -static inline unsigned long -__cmpxchg_u32_local(volatile unsigned int *p, unsigned int old, - unsigned int new) -{ - unsigned int prev; - - __asm__ __volatile__ ("\n\ -1: lwarx %0,0,%2 \n\ - cmpw 0,%0,%3 \n\ - bne 2f \n" - PPC405_ERR77(0,%2) -" stwcx. %4,0,%2 \n\ - bne- 1b\n" -"2:" - : "=&r" (prev), "=m" (*p) - : "r" (p), "r" (old), "r" (new), "m" (*p) - : "cc", "memory"); - - return prev; -} - -/* This function doesn't exist, so you'll get a linker error - if something tries to do an invalid cmpxchg(). */ -extern void __cmpxchg_called_with_bad_pointer(void); - -static __inline__ unsigned long -__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, - unsigned int size) -{ - switch (size) { - case 4: - return __cmpxchg_u32(ptr, old, new); -#if 0 /* we don't have __cmpxchg_u64 on 32-bit PPC */ - case 8: - return __cmpxchg_u64(ptr, old, new); -#endif /* 0 */ - } - __cmpxchg_called_with_bad_pointer(); - return old; -} - -#define cmpxchg(ptr, o, n) \ - ({ \ - __typeof__(*(ptr)) _o_ = (o); \ - __typeof__(*(ptr)) _n_ = (n); \ - (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \ - (unsigned long)_n_, sizeof(*(ptr))); \ - }) - -#include <asm-generic/cmpxchg-local.h> - -static inline unsigned long __cmpxchg_local(volatile void *ptr, - unsigned long old, - unsigned long new, int size) -{ - switch (size) { - case 4: - return __cmpxchg_u32_local(ptr, old, new); - default: - return __cmpxchg_local_generic(ptr, old, new, size); - } - - return old; -} - -/* - * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make - * them available. - */ -#define cmpxchg_local(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o), \ - (unsigned long)(n), sizeof(*(ptr)))) -#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) - -#define arch_align_stack(x) (x) - -#endif /* __KERNEL__ */ -#endif /* __PPC_SYSTEM_H */ diff --git a/include/asm-ppc/time.h b/include/asm-ppc/time.h deleted file mode 100644 index 81dbcd43a501..000000000000 --- a/include/asm-ppc/time.h +++ /dev/null @@ -1,161 +0,0 @@ -/* - * Common time prototypes and such for all ppc machines. - * - * Written by Cort Dougan (cort@fsmlabs.com) to merge - * Paul Mackerras' version and mine for PReP and Pmac. - */ - -#ifdef __KERNEL__ -#ifndef __ASM_TIME_H__ -#define __ASM_TIME_H__ - -#include <linux/types.h> -#include <linux/rtc.h> -#include <linux/threads.h> - -#include <asm/reg.h> - -/* time.c */ -extern unsigned tb_ticks_per_jiffy; -extern unsigned tb_to_us; -extern unsigned tb_last_stamp; -extern unsigned long disarm_decr[NR_CPUS]; - -extern void to_tm(int tim, struct rtc_time * tm); -extern time_t last_rtc_update; - -extern void set_dec_cpu6(unsigned int val); - -int via_calibrate_decr(void); - -/* Accessor functions for the decrementer register. - * The 4xx doesn't even have a decrementer. I tried to use the - * generic timer interrupt code, which seems OK, with the 4xx PIT - * in auto-reload mode. The problem is PIT stops counting when it - * hits zero. If it would wrap, we could use it just like a decrementer. - */ -static __inline__ unsigned int get_dec(void) -{ -#if defined(CONFIG_40x) - return (mfspr(SPRN_PIT)); -#else - return (mfspr(SPRN_DEC)); -#endif -} - -static __inline__ void set_dec(unsigned int val) -{ -#if defined(CONFIG_40x) - return; /* Have to let it auto-reload */ -#elif defined(CONFIG_8xx_CPU6) - set_dec_cpu6(val); -#else - mtspr(SPRN_DEC, val); -#endif -} - -/* Accessor functions for the timebase (RTC on 601) registers. */ -/* If one day CONFIG_POWER is added just define __USE_RTC as 1 */ -#ifdef CONFIG_6xx -extern __inline__ int __pure __USE_RTC(void) { - return (mfspr(SPRN_PVR)>>16) == 1; -} -#else -#define __USE_RTC() 0 -#endif - -extern __inline__ unsigned long get_tbl(void) { - unsigned long tbl; -#if defined(CONFIG_403GCX) - asm volatile("mfspr %0, 0x3dd" : "=r" (tbl)); -#else - asm volatile("mftb %0" : "=r" (tbl)); -#endif - return tbl; -} - -extern __inline__ unsigned long get_tbu(void) { - unsigned long tbl; -#if defined(CONFIG_403GCX) - asm volatile("mfspr %0, 0x3dc" : "=r" (tbl)); -#else - asm volatile("mftbu %0" : "=r" (tbl)); -#endif - return tbl; -} - -extern __inline__ void set_tb(unsigned int upper, unsigned int lower) -{ - mtspr(SPRN_TBWL, 0); - mtspr(SPRN_TBWU, upper); - mtspr(SPRN_TBWL, lower); -} - -extern __inline__ unsigned long get_rtcl(void) { - unsigned long rtcl; - asm volatile("mfrtcl %0" : "=r" (rtcl)); - return rtcl; -} - -extern __inline__ unsigned long get_rtcu(void) -{ - unsigned long rtcu; - asm volatile("mfrtcu %0" : "=r" (rtcu)); - return rtcu; -} - -extern __inline__ unsigned get_native_tbl(void) { - if (__USE_RTC()) - return get_rtcl(); - else - return get_tbl(); -} - -/* On machines with RTC, this function can only be used safely - * after the timestamp and for 1 second. It is only used by gettimeofday - * however so it should not matter. - */ -extern __inline__ unsigned tb_ticks_since(unsigned tstamp) { - if (__USE_RTC()) { - int delta = get_rtcl() - tstamp; - return delta<0 ? delta + 1000000000 : delta; - } else { - return get_tbl() - tstamp; - } -} - -#if 0 -extern __inline__ unsigned long get_bin_rtcl(void) { - unsigned long rtcl, rtcu1, rtcu2; - asm volatile("\ -1: mfrtcu %0\n\ - mfrtcl %1\n\ - mfrtcu %2\n\ - cmpw %0,%2\n\ - bne- 1b\n" - : "=r" (rtcu1), "=r" (rtcl), "=r" (rtcu2) - : : "cr0"); - return rtcu2*1000000000+rtcl; -} - -extern __inline__ unsigned binary_tbl(void) { - if (__USE_RTC()) - return get_bin_rtcl(); - else - return get_tbl(); -} -#endif - -/* Use mulhwu to scale processor timebase to timeval */ -/* Specifically, this computes (x * y) / 2^32. -- paulus */ -#define mulhwu(x,y) \ -({unsigned z; asm ("mulhwu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;}) - -unsigned mulhwu_scale_factor(unsigned, unsigned); - -#define account_process_vtime(tsk) do { } while (0) -#define calculate_steal_time() do { } while (0) -#define snapshot_timebases() do { } while (0) - -#endif /* __ASM_TIME_H__ */ -#endif /* __KERNEL__ */ diff --git a/include/asm-ppc/todc.h b/include/asm-ppc/todc.h deleted file mode 100644 index 937c7dbe6e5c..000000000000 --- a/include/asm-ppc/todc.h +++ /dev/null @@ -1,488 +0,0 @@ -/* - * Definitions for the M48Txx and mc146818 series of Time of day/Real Time - * Clock chips. - * - * Author: Mark A. Greer - * mgreer@mvista.com - * - * 2001 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -/* - * Support for the M48T37/M48T59/.../mc146818 Real Time Clock chips. - * Purpose is to make one generic file that handles all of these chips instead - * of every platform implementing the same code over & over again. - */ - -#ifndef __PPC_KERNEL_TODC_H -#define __PPC_KERNEL_TODC_H - -typedef struct { - uint rtc_type; /* your particular chip */ - - /* - * Following are the addresses of the AS0, AS1, and DATA registers - * of these chips. Note that these are board-specific. - */ - unsigned int nvram_as0; - unsigned int nvram_as1; - unsigned int nvram_data; - - /* - * Define bits to stop external set of regs from changing so - * the chip can be read/written reliably. - */ - unsigned char enable_read; - unsigned char enable_write; - - /* - * Following is the number of AS0 address bits. This is normally - * 8 but some bad hardware routes address lines incorrectly. - */ - int as0_bits; - - int nvram_size; /* Size of NVRAM on chip */ - int sw_flags; /* Software control flags */ - - /* Following are the register offsets for the particular chip */ - int year; - int month; - int day_of_month; - int day_of_week; - int hours; - int minutes; - int seconds; - int control_b; - int control_a; - int watchdog; - int interrupts; - int alarm_date; - int alarm_hour; - int alarm_minutes; - int alarm_seconds; - int century; - int flags; - - /* - * Some RTC chips have their NVRAM buried behind a addr/data pair of - * regs on the first level/clock registers. The following fields - * are the addresses for those addr/data regs. - */ - int nvram_addr_reg; - int nvram_data_reg; -} todc_info_t; - -/* - * Define the types of TODC/RTC variants that are supported in - * arch/ppc/kernel/todc_time.c - * Make a new one of these for any chip somehow differs from what's already - * defined. That way, if you ever need to put in code to touch those - * bits/registers in todc_time.c, you can put it inside an - * 'if (todc_info->rtc_type == TODC_TYPE_XXX)' so you won't break - * anyone else. - */ -#define TODC_TYPE_MK48T35 1 -#define TODC_TYPE_MK48T37 2 -#define TODC_TYPE_MK48T59 3 -#define TODC_TYPE_DS1693 4 /* Dallas DS1693 RTC */ -#define TODC_TYPE_DS1743 5 /* Dallas DS1743 RTC */ -#define TODC_TYPE_DS1746 6 /* Dallas DS1746 RTC */ -#define TODC_TYPE_DS1747 7 /* Dallas DS1747 RTC */ -#define TODC_TYPE_DS1501 8 /* Dallas DS1501 RTC */ -#define TODC_TYPE_DS1643 9 /* Dallas DS1643 RTC */ -#define TODC_TYPE_PC97307 10 /* PC97307 internal RTC */ -#define TODC_TYPE_DS1557 11 /* Dallas DS1557 RTC */ -#define TODC_TYPE_DS17285 12 /* Dallas DS17285 RTC */ -#define TODC_TYPE_DS1553 13 /* Dallas DS1553 RTC */ -#define TODC_TYPE_MC146818 100 /* Leave room for m48txx's */ - -/* - * Bit to clear/set to enable reads/writes to the chip - */ -#define TODC_MK48TXX_CNTL_A_R 0x40 -#define TODC_MK48TXX_CNTL_A_W 0x80 -#define TODC_MK48TXX_DAY_CB 0x80 - -#define TODC_DS1501_CNTL_B_TE 0x80 - -/* - * Define flag bits used by todc routines. - */ -#define TODC_FLAG_2_LEVEL_NVRAM 0x00000001 - -/* - * Define the values for the various RTC's that should to into the todc_info - * table. - * Note: The XXX_NVRAM_SIZE, XXX_NVRAM_ADDR_REG, and XXX_NVRAM_DATA_REG only - * matter if XXX_SW_FLAGS has TODC_FLAG_2_LEVEL_NVRAM set. - */ -#define TODC_TYPE_MK48T35_NVRAM_SIZE 0x7ff8 -#define TODC_TYPE_MK48T35_SW_FLAGS 0 -#define TODC_TYPE_MK48T35_YEAR 0x7fff -#define TODC_TYPE_MK48T35_MONTH 0x7ffe -#define TODC_TYPE_MK48T35_DOM 0x7ffd /* Day of Month */ -#define TODC_TYPE_MK48T35_DOW 0x7ffc /* Day of Week */ -#define TODC_TYPE_MK48T35_HOURS 0x7ffb -#define TODC_TYPE_MK48T35_MINUTES 0x7ffa -#define TODC_TYPE_MK48T35_SECONDS 0x7ff9 -#define TODC_TYPE_MK48T35_CNTL_B 0x7ff9 -#define TODC_TYPE_MK48T35_CNTL_A 0x7ff8 -#define TODC_TYPE_MK48T35_WATCHDOG 0x0000 -#define TODC_TYPE_MK48T35_INTERRUPTS 0x0000 -#define TODC_TYPE_MK48T35_ALARM_DATE 0x0000 -#define TODC_TYPE_MK48T35_ALARM_HOUR 0x0000 -#define TODC_TYPE_MK48T35_ALARM_MINUTES 0x0000 -#define TODC_TYPE_MK48T35_ALARM_SECONDS 0x0000 -#define TODC_TYPE_MK48T35_CENTURY 0x0000 -#define TODC_TYPE_MK48T35_FLAGS 0x0000 -#define TODC_TYPE_MK48T35_NVRAM_ADDR_REG 0 -#define TODC_TYPE_MK48T35_NVRAM_DATA_REG 0 - -#define TODC_TYPE_MK48T37_NVRAM_SIZE 0x7ff0 -#define TODC_TYPE_MK48T37_SW_FLAGS 0 -#define TODC_TYPE_MK48T37_YEAR 0x7fff -#define TODC_TYPE_MK48T37_MONTH 0x7ffe -#define TODC_TYPE_MK48T37_DOM 0x7ffd /* Day of Month */ -#define TODC_TYPE_MK48T37_DOW 0x7ffc /* Day of Week */ -#define TODC_TYPE_MK48T37_HOURS 0x7ffb -#define TODC_TYPE_MK48T37_MINUTES 0x7ffa -#define TODC_TYPE_MK48T37_SECONDS 0x7ff9 -#define TODC_TYPE_MK48T37_CNTL_B 0x7ff9 -#define TODC_TYPE_MK48T37_CNTL_A 0x7ff8 -#define TODC_TYPE_MK48T37_WATCHDOG 0x7ff7 -#define TODC_TYPE_MK48T37_INTERRUPTS 0x7ff6 -#define TODC_TYPE_MK48T37_ALARM_DATE 0x7ff5 -#define TODC_TYPE_MK48T37_ALARM_HOUR 0x7ff4 -#define TODC_TYPE_MK48T37_ALARM_MINUTES 0x7ff3 -#define TODC_TYPE_MK48T37_ALARM_SECONDS 0x7ff2 -#define TODC_TYPE_MK48T37_CENTURY 0x7ff1 -#define TODC_TYPE_MK48T37_FLAGS 0x7ff0 -#define TODC_TYPE_MK48T37_NVRAM_ADDR_REG 0 -#define TODC_TYPE_MK48T37_NVRAM_DATA_REG 0 - -#define TODC_TYPE_MK48T59_NVRAM_SIZE 0x1ff0 -#define TODC_TYPE_MK48T59_SW_FLAGS 0 -#define TODC_TYPE_MK48T59_YEAR 0x1fff -#define TODC_TYPE_MK48T59_MONTH 0x1ffe -#define TODC_TYPE_MK48T59_DOM 0x1ffd /* Day of Month */ -#define TODC_TYPE_MK48T59_DOW 0x1ffc /* Day of Week */ -#define TODC_TYPE_MK48T59_HOURS 0x1ffb -#define TODC_TYPE_MK48T59_MINUTES 0x1ffa -#define TODC_TYPE_MK48T59_SECONDS 0x1ff9 -#define TODC_TYPE_MK48T59_CNTL_B 0x1ff9 -#define TODC_TYPE_MK48T59_CNTL_A 0x1ff8 -#define TODC_TYPE_MK48T59_WATCHDOG 0x1fff -#define TODC_TYPE_MK48T59_INTERRUPTS 0x1fff -#define TODC_TYPE_MK48T59_ALARM_DATE 0x1fff -#define TODC_TYPE_MK48T59_ALARM_HOUR 0x1fff -#define TODC_TYPE_MK48T59_ALARM_MINUTES 0x1fff -#define TODC_TYPE_MK48T59_ALARM_SECONDS 0x1fff -#define TODC_TYPE_MK48T59_CENTURY 0x1fff -#define TODC_TYPE_MK48T59_FLAGS 0x1fff -#define TODC_TYPE_MK48T59_NVRAM_ADDR_REG 0 -#define TODC_TYPE_MK48T59_NVRAM_DATA_REG 0 - -#define TODC_TYPE_DS1501_NVRAM_SIZE 0x100 -#define TODC_TYPE_DS1501_SW_FLAGS TODC_FLAG_2_LEVEL_NVRAM -#define TODC_TYPE_DS1501_YEAR (TODC_TYPE_DS1501_NVRAM_SIZE + 0x06) -#define TODC_TYPE_DS1501_MONTH (TODC_TYPE_DS1501_NVRAM_SIZE + 0x05) -#define TODC_TYPE_DS1501_DOM (TODC_TYPE_DS1501_NVRAM_SIZE + 0x04) -#define TODC_TYPE_DS1501_DOW (TODC_TYPE_DS1501_NVRAM_SIZE + 0x03) -#define TODC_TYPE_DS1501_HOURS (TODC_TYPE_DS1501_NVRAM_SIZE + 0x02) -#define TODC_TYPE_DS1501_MINUTES (TODC_TYPE_DS1501_NVRAM_SIZE + 0x01) -#define TODC_TYPE_DS1501_SECONDS (TODC_TYPE_DS1501_NVRAM_SIZE + 0x00) -#define TODC_TYPE_DS1501_CNTL_B (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0f) -#define TODC_TYPE_DS1501_CNTL_A (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0f) -#define TODC_TYPE_DS1501_WATCHDOG (TODC_TYPE_DS1501_NVRAM_SIZE + 0xff) -#define TODC_TYPE_DS1501_INTERRUPTS (TODC_TYPE_DS1501_NVRAM_SIZE + 0xff) -#define TODC_TYPE_DS1501_ALARM_DATE (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0b) -#define TODC_TYPE_DS1501_ALARM_HOUR (TODC_TYPE_DS1501_NVRAM_SIZE + 0x0a) -#define TODC_TYPE_DS1501_ALARM_MINUTES (TODC_TYPE_DS1501_NVRAM_SIZE + 0x09) -#define TODC_TYPE_DS1501_ALARM_SECONDS (TODC_TYPE_DS1501_NVRAM_SIZE + 0x08) -#define TODC_TYPE_DS1501_CENTURY (TODC_TYPE_DS1501_NVRAM_SIZE + 0x07) -#define TODC_TYPE_DS1501_FLAGS (TODC_TYPE_DS1501_NVRAM_SIZE + 0xff) -#define TODC_TYPE_DS1501_NVRAM_ADDR_REG 0x10 -#define TODC_TYPE_DS1501_NVRAM_DATA_REG 0x13 - -#define TODC_TYPE_DS1553_NVRAM_SIZE 0x1ff0 -#define TODC_TYPE_DS1553_SW_FLAGS 0 -#define TODC_TYPE_DS1553_YEAR 0x1fff -#define TODC_TYPE_DS1553_MONTH 0x1ffe -#define TODC_TYPE_DS1553_DOM 0x1ffd /* Day of Month */ -#define TODC_TYPE_DS1553_DOW 0x1ffc /* Day of Week */ -#define TODC_TYPE_DS1553_HOURS 0x1ffb -#define TODC_TYPE_DS1553_MINUTES 0x1ffa -#define TODC_TYPE_DS1553_SECONDS 0x1ff9 -#define TODC_TYPE_DS1553_CNTL_B 0x1ff9 -#define TODC_TYPE_DS1553_CNTL_A 0x1ff8 /* control_a R/W regs */ -#define TODC_TYPE_DS1553_WATCHDOG 0x1ff7 -#define TODC_TYPE_DS1553_INTERRUPTS 0x1ff6 -#define TODC_TYPE_DS1553_ALARM_DATE 0x1ff5 -#define TODC_TYPE_DS1553_ALARM_HOUR 0x1ff4 -#define TODC_TYPE_DS1553_ALARM_MINUTES 0x1ff3 -#define TODC_TYPE_DS1553_ALARM_SECONDS 0x1ff2 -#define TODC_TYPE_DS1553_CENTURY 0x1ff8 -#define TODC_TYPE_DS1553_FLAGS 0x1ff0 -#define TODC_TYPE_DS1553_NVRAM_ADDR_REG 0 -#define TODC_TYPE_DS1553_NVRAM_DATA_REG 0 - -#define TODC_TYPE_DS1557_NVRAM_SIZE 0x7fff0 -#define TODC_TYPE_DS1557_SW_FLAGS 0 -#define TODC_TYPE_DS1557_YEAR 0x7ffff -#define TODC_TYPE_DS1557_MONTH 0x7fffe -#define TODC_TYPE_DS1557_DOM 0x7fffd /* Day of Month */ -#define TODC_TYPE_DS1557_DOW 0x7fffc /* Day of Week */ -#define TODC_TYPE_DS1557_HOURS 0x7fffb -#define TODC_TYPE_DS1557_MINUTES 0x7fffa -#define TODC_TYPE_DS1557_SECONDS 0x7fff9 -#define TODC_TYPE_DS1557_CNTL_B 0x7fff9 -#define TODC_TYPE_DS1557_CNTL_A 0x7fff8 /* control_a R/W regs */ -#define TODC_TYPE_DS1557_WATCHDOG 0x7fff7 -#define TODC_TYPE_DS1557_INTERRUPTS 0x7fff6 -#define TODC_TYPE_DS1557_ALARM_DATE 0x7fff5 -#define TODC_TYPE_DS1557_ALARM_HOUR 0x7fff4 -#define TODC_TYPE_DS1557_ALARM_MINUTES 0x7fff3 -#define TODC_TYPE_DS1557_ALARM_SECONDS 0x7fff2 -#define TODC_TYPE_DS1557_CENTURY 0x7fff8 -#define TODC_TYPE_DS1557_FLAGS 0x7fff0 -#define TODC_TYPE_DS1557_NVRAM_ADDR_REG 0 -#define TODC_TYPE_DS1557_NVRAM_DATA_REG 0 - -#define TODC_TYPE_DS1643_NVRAM_SIZE 0x1ff8 -#define TODC_TYPE_DS1643_SW_FLAGS 0 -#define TODC_TYPE_DS1643_YEAR 0x1fff -#define TODC_TYPE_DS1643_MONTH 0x1ffe -#define TODC_TYPE_DS1643_DOM 0x1ffd /* Day of Month */ -#define TODC_TYPE_DS1643_DOW 0x1ffc /* Day of Week */ -#define TODC_TYPE_DS1643_HOURS 0x1ffb -#define TODC_TYPE_DS1643_MINUTES 0x1ffa -#define TODC_TYPE_DS1643_SECONDS 0x1ff9 -#define TODC_TYPE_DS1643_CNTL_B 0x1ff9 -#define TODC_TYPE_DS1643_CNTL_A 0x1ff8 /* control_a R/W regs */ -#define TODC_TYPE_DS1643_WATCHDOG 0x1fff -#define TODC_TYPE_DS1643_INTERRUPTS 0x1fff -#define TODC_TYPE_DS1643_ALARM_DATE 0x1fff -#define TODC_TYPE_DS1643_ALARM_HOUR 0x1fff -#define TODC_TYPE_DS1643_ALARM_MINUTES 0x1fff -#define TODC_TYPE_DS1643_ALARM_SECONDS 0x1fff -#define TODC_TYPE_DS1643_CENTURY 0x1ff8 -#define TODC_TYPE_DS1643_FLAGS 0x1fff -#define TODC_TYPE_DS1643_NVRAM_ADDR_REG 0 -#define TODC_TYPE_DS1643_NVRAM_DATA_REG 0 - -#define TODC_TYPE_DS1693_NVRAM_SIZE 0 /* Not handled yet */ -#define TODC_TYPE_DS1693_SW_FLAGS 0 -#define TODC_TYPE_DS1693_YEAR 0x09 -#define TODC_TYPE_DS1693_MONTH 0x08 -#define TODC_TYPE_DS1693_DOM 0x07 /* Day of Month */ -#define TODC_TYPE_DS1693_DOW 0x06 /* Day of Week */ -#define TODC_TYPE_DS1693_HOURS 0x04 -#define TODC_TYPE_DS1693_MINUTES 0x02 -#define TODC_TYPE_DS1693_SECONDS 0x00 -#define TODC_TYPE_DS1693_CNTL_B 0x0b -#define TODC_TYPE_DS1693_CNTL_A 0x0a -#define TODC_TYPE_DS1693_WATCHDOG 0xff -#define TODC_TYPE_DS1693_INTERRUPTS 0xff -#define TODC_TYPE_DS1693_ALARM_DATE 0x49 -#define TODC_TYPE_DS1693_ALARM_HOUR 0x05 -#define TODC_TYPE_DS1693_ALARM_MINUTES 0x03 -#define TODC_TYPE_DS1693_ALARM_SECONDS 0x01 -#define TODC_TYPE_DS1693_CENTURY 0x48 -#define TODC_TYPE_DS1693_FLAGS 0xff -#define TODC_TYPE_DS1693_NVRAM_ADDR_REG 0 -#define TODC_TYPE_DS1693_NVRAM_DATA_REG 0 - -#define TODC_TYPE_DS1743_NVRAM_SIZE 0x1ff8 -#define TODC_TYPE_DS1743_SW_FLAGS 0 -#define TODC_TYPE_DS1743_YEAR 0x1fff -#define TODC_TYPE_DS1743_MONTH 0x1ffe -#define TODC_TYPE_DS1743_DOM 0x1ffd /* Day of Month */ -#define TODC_TYPE_DS1743_DOW 0x1ffc /* Day of Week */ -#define TODC_TYPE_DS1743_HOURS 0x1ffb -#define TODC_TYPE_DS1743_MINUTES 0x1ffa -#define TODC_TYPE_DS1743_SECONDS 0x1ff9 -#define TODC_TYPE_DS1743_CNTL_B 0x1ff9 -#define TODC_TYPE_DS1743_CNTL_A 0x1ff8 /* control_a R/W regs */ -#define TODC_TYPE_DS1743_WATCHDOG 0x1fff -#define TODC_TYPE_DS1743_INTERRUPTS 0x1fff -#define TODC_TYPE_DS1743_ALARM_DATE 0x1fff -#define TODC_TYPE_DS1743_ALARM_HOUR 0x1fff -#define TODC_TYPE_DS1743_ALARM_MINUTES 0x1fff -#define TODC_TYPE_DS1743_ALARM_SECONDS 0x1fff -#define TODC_TYPE_DS1743_CENTURY 0x1ff8 -#define TODC_TYPE_DS1743_FLAGS 0x1fff -#define TODC_TYPE_DS1743_NVRAM_ADDR_REG 0 -#define TODC_TYPE_DS1743_NVRAM_DATA_REG 0 - -#define TODC_TYPE_DS1746_NVRAM_SIZE 0x1fff8 -#define TODC_TYPE_DS1746_SW_FLAGS 0 -#define TODC_TYPE_DS1746_YEAR 0x1ffff -#define TODC_TYPE_DS1746_MONTH 0x1fffe -#define TODC_TYPE_DS1746_DOM 0x1fffd /* Day of Month */ -#define TODC_TYPE_DS1746_DOW 0x1fffc /* Day of Week */ -#define TODC_TYPE_DS1746_HOURS 0x1fffb -#define TODC_TYPE_DS1746_MINUTES 0x1fffa -#define TODC_TYPE_DS1746_SECONDS 0x1fff9 -#define TODC_TYPE_DS1746_CNTL_B 0x1fff9 -#define TODC_TYPE_DS1746_CNTL_A 0x1fff8 /* control_a R/W regs */ -#define TODC_TYPE_DS1746_WATCHDOG 0x00000 -#define TODC_TYPE_DS1746_INTERRUPTS 0x00000 -#define TODC_TYPE_DS1746_ALARM_DATE 0x00000 -#define TODC_TYPE_DS1746_ALARM_HOUR 0x00000 -#define TODC_TYPE_DS1746_ALARM_MINUTES 0x00000 -#define TODC_TYPE_DS1746_ALARM_SECONDS 0x00000 -#define TODC_TYPE_DS1746_CENTURY 0x00000 -#define TODC_TYPE_DS1746_FLAGS 0x00000 -#define TODC_TYPE_DS1746_NVRAM_ADDR_REG 0 -#define TODC_TYPE_DS1746_NVRAM_DATA_REG 0 - -#define TODC_TYPE_DS1747_NVRAM_SIZE 0x7fff8 -#define TODC_TYPE_DS1747_SW_FLAGS 0 -#define TODC_TYPE_DS1747_YEAR 0x7ffff -#define TODC_TYPE_DS1747_MONTH 0x7fffe -#define TODC_TYPE_DS1747_DOM 0x7fffd /* Day of Month */ -#define TODC_TYPE_DS1747_DOW 0x7fffc /* Day of Week */ -#define TODC_TYPE_DS1747_HOURS 0x7fffb -#define TODC_TYPE_DS1747_MINUTES 0x7fffa -#define TODC_TYPE_DS1747_SECONDS 0x7fff9 -#define TODC_TYPE_DS1747_CNTL_B 0x7fff9 -#define TODC_TYPE_DS1747_CNTL_A 0x7fff8 /* control_a R/W regs */ -#define TODC_TYPE_DS1747_WATCHDOG 0x00000 -#define TODC_TYPE_DS1747_INTERRUPTS 0x00000 -#define TODC_TYPE_DS1747_ALARM_DATE 0x00000 -#define TODC_TYPE_DS1747_ALARM_HOUR 0x00000 -#define TODC_TYPE_DS1747_ALARM_MINUTES 0x00000 -#define TODC_TYPE_DS1747_ALARM_SECONDS 0x00000 -#define TODC_TYPE_DS1747_CENTURY 0x00000 -#define TODC_TYPE_DS1747_FLAGS 0x00000 -#define TODC_TYPE_DS1747_NVRAM_ADDR_REG 0 -#define TODC_TYPE_DS1747_NVRAM_DATA_REG 0 - -#define TODC_TYPE_DS17285_NVRAM_SIZE (0x1000-0x80) /* 4Kx8 NVRAM (minus RTC regs) */ -#define TODC_TYPE_DS17285_SW_FLAGS TODC_FLAG_2_LEVEL_NVRAM -#define TODC_TYPE_DS17285_SECONDS (TODC_TYPE_DS17285_NVRAM_SIZE + 0x00) -#define TODC_TYPE_DS17285_ALARM_SECONDS (TODC_TYPE_DS17285_NVRAM_SIZE + 0x01) -#define TODC_TYPE_DS17285_MINUTES (TODC_TYPE_DS17285_NVRAM_SIZE + 0x02) -#define TODC_TYPE_DS17285_ALARM_MINUTES (TODC_TYPE_DS17285_NVRAM_SIZE + 0x03) -#define TODC_TYPE_DS17285_HOURS (TODC_TYPE_DS17285_NVRAM_SIZE + 0x04) -#define TODC_TYPE_DS17285_ALARM_HOUR (TODC_TYPE_DS17285_NVRAM_SIZE + 0x05) -#define TODC_TYPE_DS17285_DOW (TODC_TYPE_DS17285_NVRAM_SIZE + 0x06) -#define TODC_TYPE_DS17285_DOM (TODC_TYPE_DS17285_NVRAM_SIZE + 0x07) -#define TODC_TYPE_DS17285_MONTH (TODC_TYPE_DS17285_NVRAM_SIZE + 0x08) -#define TODC_TYPE_DS17285_YEAR (TODC_TYPE_DS17285_NVRAM_SIZE + 0x09) -#define TODC_TYPE_DS17285_CNTL_A (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0A) -#define TODC_TYPE_DS17285_CNTL_B (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0B) -#define TODC_TYPE_DS17285_CNTL_C (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0C) -#define TODC_TYPE_DS17285_CNTL_D (TODC_TYPE_DS17285_NVRAM_SIZE + 0x0D) -#define TODC_TYPE_DS17285_WATCHDOG 0 -#define TODC_TYPE_DS17285_INTERRUPTS 0 -#define TODC_TYPE_DS17285_ALARM_DATE 0 -#define TODC_TYPE_DS17285_CENTURY 0 -#define TODC_TYPE_DS17285_FLAGS 0 -#define TODC_TYPE_DS17285_NVRAM_ADDR_REG 0x50 -#define TODC_TYPE_DS17285_NVRAM_DATA_REG 0x53 - -#define TODC_TYPE_MC146818_NVRAM_SIZE 0 /* XXXX */ -#define TODC_TYPE_MC146818_SW_FLAGS 0 -#define TODC_TYPE_MC146818_YEAR 0x09 -#define TODC_TYPE_MC146818_MONTH 0x08 -#define TODC_TYPE_MC146818_DOM 0x07 /* Day of Month */ -#define TODC_TYPE_MC146818_DOW 0x06 /* Day of Week */ -#define TODC_TYPE_MC146818_HOURS 0x04 -#define TODC_TYPE_MC146818_MINUTES 0x02 -#define TODC_TYPE_MC146818_SECONDS 0x00 -#define TODC_TYPE_MC146818_CNTL_B 0x0a -#define TODC_TYPE_MC146818_CNTL_A 0x0b /* control_a R/W regs */ -#define TODC_TYPE_MC146818_WATCHDOG 0 -#define TODC_TYPE_MC146818_INTERRUPTS 0x0c -#define TODC_TYPE_MC146818_ALARM_DATE 0xff -#define TODC_TYPE_MC146818_ALARM_HOUR 0x05 -#define TODC_TYPE_MC146818_ALARM_MINUTES 0x03 -#define TODC_TYPE_MC146818_ALARM_SECONDS 0x01 -#define TODC_TYPE_MC146818_CENTURY 0xff -#define TODC_TYPE_MC146818_FLAGS 0xff -#define TODC_TYPE_MC146818_NVRAM_ADDR_REG 0 -#define TODC_TYPE_MC146818_NVRAM_DATA_REG 0 - -#define TODC_TYPE_PC97307_NVRAM_SIZE 0 /* No NVRAM? */ -#define TODC_TYPE_PC97307_SW_FLAGS 0 -#define TODC_TYPE_PC97307_YEAR 0x09 -#define TODC_TYPE_PC97307_MONTH 0x08 -#define TODC_TYPE_PC97307_DOM 0x07 /* Day of Month */ -#define TODC_TYPE_PC97307_DOW 0x06 /* Day of Week */ -#define TODC_TYPE_PC97307_HOURS 0x04 -#define TODC_TYPE_PC97307_MINUTES 0x02 -#define TODC_TYPE_PC97307_SECONDS 0x00 -#define TODC_TYPE_PC97307_CNTL_B 0x0a -#define TODC_TYPE_PC97307_CNTL_A 0x0b /* control_a R/W regs */ -#define TODC_TYPE_PC97307_WATCHDOG 0x0c -#define TODC_TYPE_PC97307_INTERRUPTS 0x0d -#define TODC_TYPE_PC97307_ALARM_DATE 0xff -#define TODC_TYPE_PC97307_ALARM_HOUR 0x05 -#define TODC_TYPE_PC97307_ALARM_MINUTES 0x03 -#define TODC_TYPE_PC97307_ALARM_SECONDS 0x01 -#define TODC_TYPE_PC97307_CENTURY 0xff -#define TODC_TYPE_PC97307_FLAGS 0xff -#define TODC_TYPE_PC97307_NVRAM_ADDR_REG 0 -#define TODC_TYPE_PC97307_NVRAM_DATA_REG 0 - -/* - * Define macros to allocate and init the todc_info_t table that will - * be used by the todc_time.c routines. - */ -#define TODC_ALLOC() \ - static todc_info_t todc_info_alloc; \ - todc_info_t *todc_info = &todc_info_alloc; - -#define TODC_INIT(clock_type, as0, as1, data, bits) { \ - todc_info->rtc_type = clock_type; \ - \ - todc_info->nvram_as0 = (unsigned int)(as0); \ - todc_info->nvram_as1 = (unsigned int)(as1); \ - todc_info->nvram_data = (unsigned int)(data); \ - \ - todc_info->as0_bits = (bits); \ - \ - todc_info->nvram_size = clock_type ##_NVRAM_SIZE; \ - todc_info->sw_flags = clock_type ##_SW_FLAGS; \ - \ - todc_info->year = clock_type ##_YEAR; \ - todc_info->month = clock_type ##_MONTH; \ - todc_info->day_of_month = clock_type ##_DOM; \ - todc_info->day_of_week = clock_type ##_DOW; \ - todc_info->hours = clock_type ##_HOURS; \ - todc_info->minutes = clock_type ##_MINUTES; \ - todc_info->seconds = clock_type ##_SECONDS; \ - todc_info->control_b = clock_type ##_CNTL_B; \ - todc_info->control_a = clock_type ##_CNTL_A; \ - todc_info->watchdog = clock_type ##_WATCHDOG; \ - todc_info->interrupts = clock_type ##_INTERRUPTS; \ - todc_info->alarm_date = clock_type ##_ALARM_DATE; \ - todc_info->alarm_hour = clock_type ##_ALARM_HOUR; \ - todc_info->alarm_minutes = clock_type ##_ALARM_MINUTES; \ - todc_info->alarm_seconds = clock_type ##_ALARM_SECONDS; \ - todc_info->century = clock_type ##_CENTURY; \ - todc_info->flags = clock_type ##_FLAGS; \ - \ - todc_info->nvram_addr_reg = clock_type ##_NVRAM_ADDR_REG; \ - todc_info->nvram_data_reg = clock_type ##_NVRAM_DATA_REG; \ -} - -extern todc_info_t *todc_info; - -unsigned char todc_direct_read_val(int addr); -void todc_direct_write_val(int addr, unsigned char val); -unsigned char todc_m48txx_read_val(int addr); -void todc_m48txx_write_val(int addr, unsigned char val); -unsigned char todc_mc146818_read_val(int addr); -void todc_mc146818_write_val(int addr, unsigned char val); - -long todc_time_init(void); -unsigned long todc_get_rtc_time(void); -int todc_set_rtc_time(unsigned long nowtime); -void todc_calibrate_decr(void); - -#endif /* __PPC_KERNEL_TODC_H */ diff --git a/include/asm-ppc/traps.h b/include/asm-ppc/traps.h deleted file mode 100644 index 68e7326b56f1..000000000000 --- a/include/asm-ppc/traps.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/traps.h> diff --git a/include/asm-ppc/zorro.h b/include/asm-ppc/zorro.h deleted file mode 100644 index 1e5fbc65e77b..000000000000 --- a/include/asm-ppc/zorro.h +++ /dev/null @@ -1,30 +0,0 @@ -#ifndef _ASM_PPC_ZORRO_H -#define _ASM_PPC_ZORRO_H - -#include <asm/io.h> - -#define z_readb in_8 -#define z_readw in_be16 -#define z_readl in_be32 - -#define z_writeb(val, port) out_8((port), (val)) -#define z_writew(val, port) out_be16((port), (val)) -#define z_writel(val, port) out_be32((port), (val)) - -#define z_memset_io(a,b,c) memset((void *)(a),(b),(c)) -#define z_memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) -#define z_memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) - -extern void *__ioremap(unsigned long address, unsigned long size, - unsigned long flags); - -extern void *ioremap(unsigned long address, unsigned long size); -extern void iounmap(void *addr); - -extern void *__ioremap(unsigned long address, unsigned long size, - unsigned long flags); - -#define z_ioremap ioremap -#define z_iounmap iounmap - -#endif /* _ASM_PPC_ZORRO_H */ diff --git a/include/linux/adb.h b/include/linux/adb.h index 64d8878e1444..63bca502fa55 100644 --- a/include/linux/adb.h +++ b/include/linux/adb.h @@ -84,7 +84,6 @@ enum adb_message { ADB_MSG_PRE_RESET, /* Called before resetting the bus */ ADB_MSG_POST_RESET /* Called after resetting the bus (re-do init & register) */ }; -extern struct adb_driver *adb_controller; extern struct blocking_notifier_head adb_client_list; int adb_request(struct adb_request *req, void (*done)(struct adb_request *), diff --git a/include/linux/crc-t10dif.h b/include/linux/crc-t10dif.h new file mode 100644 index 000000000000..a9c96d865ee7 --- /dev/null +++ b/include/linux/crc-t10dif.h @@ -0,0 +1,8 @@ +#ifndef _LINUX_CRC_T10DIF_H +#define _LINUX_CRC_T10DIF_H + +#include <linux/types.h> + +__u16 crc_t10dif(unsigned char const *, size_t); + +#endif diff --git a/include/linux/elf.h b/include/linux/elf.h index ff9fbed90123..edc3dac3f02f 100644 --- a/include/linux/elf.h +++ b/include/linux/elf.h @@ -358,6 +358,7 @@ typedef struct elf64_shdr { #define NT_PRXFPREG 0x46e62b7f /* copied from gdb5.1/include/elf/common.h */ #define NT_PPC_VMX 0x100 /* PowerPC Altivec/VMX registers */ #define NT_PPC_SPE 0x101 /* PowerPC SPE/EVR registers */ +#define NT_PPC_VSX 0x102 /* PowerPC VSX registers */ #define NT_386_TLS 0x200 /* i386 TLS slots (struct user_desc) */ diff --git a/include/linux/mm.h b/include/linux/mm.h index cf1cd3a2ed78..2128ef7780c6 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -108,6 +108,7 @@ extern unsigned int kobjsize(const void *objp); #define VM_CAN_NONLINEAR 0x08000000 /* Has ->fault & does nonlinear pages */ #define VM_MIXEDMAP 0x10000000 /* Can contain "struct page" and pure PFN pages */ +#define VM_SAO 0x20000000 /* Strong Access Ordering (powerpc) */ #ifndef VM_STACK_DEFAULT_FLAGS /* arch can override this */ #define VM_STACK_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS diff --git a/include/linux/mman.h b/include/linux/mman.h index dab8892e6ff1..30d1073bac3b 100644 --- a/include/linux/mman.h +++ b/include/linux/mman.h @@ -34,6 +34,32 @@ static inline void vm_unacct_memory(long pages) } /* + * Allow architectures to handle additional protection bits + */ + +#ifndef arch_calc_vm_prot_bits +#define arch_calc_vm_prot_bits(prot) 0 +#endif + +#ifndef arch_vm_get_page_prot +#define arch_vm_get_page_prot(vm_flags) __pgprot(0) +#endif + +#ifndef arch_validate_prot +/* + * This is called from mprotect(). PROT_GROWSDOWN and PROT_GROWSUP have + * already been masked out. + * + * Returns true if the prot flags are valid + */ +static inline int arch_validate_prot(unsigned long prot) +{ + return (prot & ~(PROT_READ | PROT_WRITE | PROT_EXEC | PROT_SEM)) == 0; +} +#define arch_validate_prot arch_validate_prot +#endif + +/* * Optimisation macro. It is equivalent to: * (x & bit1) ? bit2 : 0 * but this version is faster. @@ -51,7 +77,8 @@ calc_vm_prot_bits(unsigned long prot) { return _calc_vm_trans(prot, PROT_READ, VM_READ ) | _calc_vm_trans(prot, PROT_WRITE, VM_WRITE) | - _calc_vm_trans(prot, PROT_EXEC, VM_EXEC ); + _calc_vm_trans(prot, PROT_EXEC, VM_EXEC) | + arch_calc_vm_prot_bits(prot); } /* diff --git a/include/linux/of_device.h b/include/linux/of_device.h index afe338217d91..d3a74e00a3e1 100644 --- a/include/linux/of_device.h +++ b/include/linux/of_device.h @@ -24,4 +24,7 @@ static inline void of_device_free(struct of_device *dev) of_release_dev(&dev->dev); } +extern ssize_t of_device_get_modalias(struct of_device *ofdev, + char *str, ssize_t len); + #endif /* _LINUX_OF_DEVICE_H */ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 65953822c9cb..1cf4084b51e8 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2171,6 +2171,8 @@ #define PCI_DEVICE_ID_MPC8544 0x0033 #define PCI_DEVICE_ID_MPC8572E 0x0040 #define PCI_DEVICE_ID_MPC8572 0x0041 +#define PCI_DEVICE_ID_MPC8536E 0x0050 +#define PCI_DEVICE_ID_MPC8536 0x0051 #define PCI_DEVICE_ID_MPC8641 0x7010 #define PCI_DEVICE_ID_MPC8641D 0x7011 #define PCI_DEVICE_ID_MPC8610 0x7018 diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h index e19e58423166..16be12f1cbe8 100644 --- a/include/scsi/iscsi_if.h +++ b/include/scsi/iscsi_if.h @@ -50,6 +50,7 @@ enum iscsi_uevent_e { ISCSI_UEVENT_TGT_DSCVR = UEVENT_BASE + 15, ISCSI_UEVENT_SET_HOST_PARAM = UEVENT_BASE + 16, ISCSI_UEVENT_UNBIND_SESSION = UEVENT_BASE + 17, + ISCSI_UEVENT_CREATE_BOUND_SESSION = UEVENT_BASE + 18, /* up events */ ISCSI_KEVENT_RECV_PDU = KEVENT_BASE + 1, @@ -78,6 +79,12 @@ struct iscsi_uevent { uint16_t cmds_max; uint16_t queue_depth; } c_session; + struct msg_create_bound_session { + uint64_t ep_handle; + uint32_t initial_cmdsn; + uint16_t cmds_max; + uint16_t queue_depth; + } c_bound_session; struct msg_destroy_session { uint32_t sid; } d_session; @@ -250,42 +257,49 @@ enum iscsi_param { ISCSI_PARAM_PING_TMO, ISCSI_PARAM_RECV_TMO, + + ISCSI_PARAM_IFACE_NAME, + ISCSI_PARAM_ISID, + ISCSI_PARAM_INITIATOR_NAME, /* must always be last */ ISCSI_PARAM_MAX, }; -#define ISCSI_MAX_RECV_DLENGTH (1 << ISCSI_PARAM_MAX_RECV_DLENGTH) -#define ISCSI_MAX_XMIT_DLENGTH (1 << ISCSI_PARAM_MAX_XMIT_DLENGTH) -#define ISCSI_HDRDGST_EN (1 << ISCSI_PARAM_HDRDGST_EN) -#define ISCSI_DATADGST_EN (1 << ISCSI_PARAM_DATADGST_EN) -#define ISCSI_INITIAL_R2T_EN (1 << ISCSI_PARAM_INITIAL_R2T_EN) -#define ISCSI_MAX_R2T (1 << ISCSI_PARAM_MAX_R2T) -#define ISCSI_IMM_DATA_EN (1 << ISCSI_PARAM_IMM_DATA_EN) -#define ISCSI_FIRST_BURST (1 << ISCSI_PARAM_FIRST_BURST) -#define ISCSI_MAX_BURST (1 << ISCSI_PARAM_MAX_BURST) -#define ISCSI_PDU_INORDER_EN (1 << ISCSI_PARAM_PDU_INORDER_EN) -#define ISCSI_DATASEQ_INORDER_EN (1 << ISCSI_PARAM_DATASEQ_INORDER_EN) -#define ISCSI_ERL (1 << ISCSI_PARAM_ERL) -#define ISCSI_IFMARKER_EN (1 << ISCSI_PARAM_IFMARKER_EN) -#define ISCSI_OFMARKER_EN (1 << ISCSI_PARAM_OFMARKER_EN) -#define ISCSI_EXP_STATSN (1 << ISCSI_PARAM_EXP_STATSN) -#define ISCSI_TARGET_NAME (1 << ISCSI_PARAM_TARGET_NAME) -#define ISCSI_TPGT (1 << ISCSI_PARAM_TPGT) -#define ISCSI_PERSISTENT_ADDRESS (1 << ISCSI_PARAM_PERSISTENT_ADDRESS) -#define ISCSI_PERSISTENT_PORT (1 << ISCSI_PARAM_PERSISTENT_PORT) -#define ISCSI_SESS_RECOVERY_TMO (1 << ISCSI_PARAM_SESS_RECOVERY_TMO) -#define ISCSI_CONN_PORT (1 << ISCSI_PARAM_CONN_PORT) -#define ISCSI_CONN_ADDRESS (1 << ISCSI_PARAM_CONN_ADDRESS) -#define ISCSI_USERNAME (1 << ISCSI_PARAM_USERNAME) -#define ISCSI_USERNAME_IN (1 << ISCSI_PARAM_USERNAME_IN) -#define ISCSI_PASSWORD (1 << ISCSI_PARAM_PASSWORD) -#define ISCSI_PASSWORD_IN (1 << ISCSI_PARAM_PASSWORD_IN) -#define ISCSI_FAST_ABORT (1 << ISCSI_PARAM_FAST_ABORT) -#define ISCSI_ABORT_TMO (1 << ISCSI_PARAM_ABORT_TMO) -#define ISCSI_LU_RESET_TMO (1 << ISCSI_PARAM_LU_RESET_TMO) -#define ISCSI_HOST_RESET_TMO (1 << ISCSI_PARAM_HOST_RESET_TMO) -#define ISCSI_PING_TMO (1 << ISCSI_PARAM_PING_TMO) -#define ISCSI_RECV_TMO (1 << ISCSI_PARAM_RECV_TMO) +#define ISCSI_MAX_RECV_DLENGTH (1ULL << ISCSI_PARAM_MAX_RECV_DLENGTH) +#define ISCSI_MAX_XMIT_DLENGTH (1ULL << ISCSI_PARAM_MAX_XMIT_DLENGTH) +#define ISCSI_HDRDGST_EN (1ULL << ISCSI_PARAM_HDRDGST_EN) +#define ISCSI_DATADGST_EN (1ULL << ISCSI_PARAM_DATADGST_EN) +#define ISCSI_INITIAL_R2T_EN (1ULL << ISCSI_PARAM_INITIAL_R2T_EN) +#define ISCSI_MAX_R2T (1ULL << ISCSI_PARAM_MAX_R2T) +#define ISCSI_IMM_DATA_EN (1ULL << ISCSI_PARAM_IMM_DATA_EN) +#define ISCSI_FIRST_BURST (1ULL << ISCSI_PARAM_FIRST_BURST) +#define ISCSI_MAX_BURST (1ULL << ISCSI_PARAM_MAX_BURST) +#define ISCSI_PDU_INORDER_EN (1ULL << ISCSI_PARAM_PDU_INORDER_EN) +#define ISCSI_DATASEQ_INORDER_EN (1ULL << ISCSI_PARAM_DATASEQ_INORDER_EN) +#define ISCSI_ERL (1ULL << ISCSI_PARAM_ERL) +#define ISCSI_IFMARKER_EN (1ULL << ISCSI_PARAM_IFMARKER_EN) +#define ISCSI_OFMARKER_EN (1ULL << ISCSI_PARAM_OFMARKER_EN) +#define ISCSI_EXP_STATSN (1ULL << ISCSI_PARAM_EXP_STATSN) +#define ISCSI_TARGET_NAME (1ULL << ISCSI_PARAM_TARGET_NAME) +#define ISCSI_TPGT (1ULL << ISCSI_PARAM_TPGT) +#define ISCSI_PERSISTENT_ADDRESS (1ULL << ISCSI_PARAM_PERSISTENT_ADDRESS) +#define ISCSI_PERSISTENT_PORT (1ULL << ISCSI_PARAM_PERSISTENT_PORT) +#define ISCSI_SESS_RECOVERY_TMO (1ULL << ISCSI_PARAM_SESS_RECOVERY_TMO) +#define ISCSI_CONN_PORT (1ULL << ISCSI_PARAM_CONN_PORT) +#define ISCSI_CONN_ADDRESS (1ULL << ISCSI_PARAM_CONN_ADDRESS) +#define ISCSI_USERNAME (1ULL << ISCSI_PARAM_USERNAME) +#define ISCSI_USERNAME_IN (1ULL << ISCSI_PARAM_USERNAME_IN) +#define ISCSI_PASSWORD (1ULL << ISCSI_PARAM_PASSWORD) +#define ISCSI_PASSWORD_IN (1ULL << ISCSI_PARAM_PASSWORD_IN) +#define ISCSI_FAST_ABORT (1ULL << ISCSI_PARAM_FAST_ABORT) +#define ISCSI_ABORT_TMO (1ULL << ISCSI_PARAM_ABORT_TMO) +#define ISCSI_LU_RESET_TMO (1ULL << ISCSI_PARAM_LU_RESET_TMO) +#define ISCSI_HOST_RESET_TMO (1ULL << ISCSI_PARAM_HOST_RESET_TMO) +#define ISCSI_PING_TMO (1ULL << ISCSI_PARAM_PING_TMO) +#define ISCSI_RECV_TMO (1ULL << ISCSI_PARAM_RECV_TMO) +#define ISCSI_IFACE_NAME (1ULL << ISCSI_PARAM_IFACE_NAME) +#define ISCSI_ISID (1ULL << ISCSI_PARAM_ISID) +#define ISCSI_INITIATOR_NAME (1ULL << ISCSI_PARAM_INITIATOR_NAME) /* iSCSI HBA params */ enum iscsi_host_param { @@ -296,20 +310,13 @@ enum iscsi_host_param { ISCSI_HOST_PARAM_MAX, }; -#define ISCSI_HOST_HWADDRESS (1 << ISCSI_HOST_PARAM_HWADDRESS) -#define ISCSI_HOST_INITIATOR_NAME (1 << ISCSI_HOST_PARAM_INITIATOR_NAME) -#define ISCSI_HOST_NETDEV_NAME (1 << ISCSI_HOST_PARAM_NETDEV_NAME) -#define ISCSI_HOST_IPADDRESS (1 << ISCSI_HOST_PARAM_IPADDRESS) +#define ISCSI_HOST_HWADDRESS (1ULL << ISCSI_HOST_PARAM_HWADDRESS) +#define ISCSI_HOST_INITIATOR_NAME (1ULL << ISCSI_HOST_PARAM_INITIATOR_NAME) +#define ISCSI_HOST_NETDEV_NAME (1ULL << ISCSI_HOST_PARAM_NETDEV_NAME) +#define ISCSI_HOST_IPADDRESS (1ULL << ISCSI_HOST_PARAM_IPADDRESS) #define iscsi_ptr(_handle) ((void*)(unsigned long)_handle) #define iscsi_handle(_ptr) ((uint64_t)(unsigned long)_ptr) -#define hostdata_session(_hostdata) (iscsi_ptr(*(unsigned long *)_hostdata)) - -/** - * iscsi_hostdata - get LLD hostdata from scsi_host - * @_hostdata: pointer to scsi host's hostdata - **/ -#define iscsi_hostdata(_hostdata) ((void*)_hostdata + sizeof(unsigned long)) /* * These flags presents iSCSI Data-Path capabilities. diff --git a/include/scsi/iscsi_proto.h b/include/scsi/iscsi_proto.h index e0593bfae622..f2a2c1169486 100644 --- a/include/scsi/iscsi_proto.h +++ b/include/scsi/iscsi_proto.h @@ -22,6 +22,7 @@ #define ISCSI_PROTO_H #include <linux/types.h> +#include <scsi/scsi.h> #define ISCSI_DRAFT20_VERSION 0x00 @@ -156,7 +157,7 @@ struct iscsi_ecdb_ahdr { uint8_t ahstype; uint8_t reserved; /* 4-byte aligned extended CDB spillover */ - uint8_t ecdb[260 - ISCSI_CDB_SIZE]; + uint8_t ecdb[SCSI_MAX_VARLEN_CDB_SIZE - ISCSI_CDB_SIZE]; }; /* SCSI Response Header */ diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index cd3ca63d4fb1..5e75bb7f311c 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -24,6 +24,7 @@ #define LIBISCSI_H #include <linux/types.h> +#include <linux/wait.h> #include <linux/mutex.h> #include <linux/timer.h> #include <linux/workqueue.h> @@ -31,6 +32,7 @@ #include <scsi/iscsi_if.h> struct scsi_transport_template; +struct scsi_host_template; struct scsi_device; struct Scsi_Host; struct scsi_cmnd; @@ -40,6 +42,7 @@ struct iscsi_cls_session; struct iscsi_cls_conn; struct iscsi_session; struct iscsi_nopin; +struct device; /* #define DEBUG_SCSI */ #ifdef DEBUG_SCSI @@ -49,9 +52,7 @@ struct iscsi_nopin; #endif #define ISCSI_DEF_XMIT_CMDS_MAX 128 /* must be power of 2 */ -#define ISCSI_MGMT_CMDS_MAX 16 /* must be power of 2 */ - -#define ISCSI_MGMT_ITT_OFFSET 0xa00 +#define ISCSI_MGMT_CMDS_MAX 15 #define ISCSI_DEF_CMD_PER_LUN 32 #define ISCSI_MAX_CMD_PER_LUN 128 @@ -69,7 +70,10 @@ enum { /* Connection suspend "bit" */ #define ISCSI_SUSPEND_BIT 1 -#define ISCSI_ITT_MASK (0xfff) +#define ISCSI_ITT_MASK (0x1fff) +#define ISCSI_TOTAL_CMDS_MAX 4096 +/* this must be a power of two greater than ISCSI_MGMT_CMDS_MAX */ +#define ISCSI_TOTAL_CMDS_MIN 16 #define ISCSI_AGE_SHIFT 28 #define ISCSI_AGE_MASK (0xf << ISCSI_AGE_SHIFT) @@ -82,18 +86,6 @@ enum { ISCSI_DIGEST_SIZE = sizeof(__u32), }; -struct iscsi_mgmt_task { - /* - * Becuae LLDs allocate their hdr differently, this is a pointer to - * that storage. It must be setup at session creation time. - */ - struct iscsi_hdr *hdr; - char *data; /* mgmt payload */ - unsigned data_count; /* counts data to be sent */ - uint32_t itt; /* this ITT */ - void *dd_data; /* driver/transport data */ - struct list_head running; -}; enum { ISCSI_TASK_COMPLETED, @@ -101,7 +93,7 @@ enum { ISCSI_TASK_RUNNING, }; -struct iscsi_cmd_task { +struct iscsi_task { /* * Because LLDs allocate their hdr differently, this is a pointer * and length to that storage. It must be setup at session @@ -118,6 +110,7 @@ struct iscsi_cmd_task { /* offset in unsolicited stream (bytes); */ unsigned unsol_offset; unsigned data_count; /* remaining Data-Out */ + char *data; /* mgmt payload */ struct scsi_cmnd *sc; /* associated SCSI cmd*/ struct iscsi_conn *conn; /* used connection */ @@ -128,9 +121,9 @@ struct iscsi_cmd_task { void *dd_data; /* driver/transport data */ }; -static inline void* iscsi_next_hdr(struct iscsi_cmd_task *ctask) +static inline void* iscsi_next_hdr(struct iscsi_task *task) { - return (void*)ctask->hdr + ctask->hdr_len; + return (void*)task->hdr + task->hdr_len; } /* Connection's states */ @@ -146,11 +139,6 @@ struct iscsi_conn { void *dd_data; /* iscsi_transport data */ struct iscsi_session *session; /* parent session */ /* - * LLDs should set this lock. It protects the transport recv - * code - */ - rwlock_t *recv_lock; - /* * conn_stop() flag: stop to recover, stop to terminate */ int stop_stage; @@ -159,7 +147,7 @@ struct iscsi_conn { unsigned long last_ping; int ping_timeout; int recv_timeout; - struct iscsi_mgmt_task *ping_mtask; + struct iscsi_task *ping_task; /* iSCSI connection-wide sequencing */ uint32_t exp_statsn; @@ -175,9 +163,8 @@ struct iscsi_conn { * should always fit in this buffer */ char *data; - struct iscsi_mgmt_task *login_mtask; /* mtask used for login/text */ - struct iscsi_mgmt_task *mtask; /* xmit mtask in progress */ - struct iscsi_cmd_task *ctask; /* xmit ctask in progress */ + struct iscsi_task *login_task; /* mtask used for login/text */ + struct iscsi_task *task; /* xmit task in progress */ /* xmit */ struct list_head mgmtqueue; /* mgmt (control) xmit queue */ @@ -208,9 +195,6 @@ struct iscsi_conn { /* remote portal currently connected to */ int portal_port; char portal_address[ISCSI_ADDRESS_BUF_LEN]; - /* local address */ - int local_port; - char local_address[ISCSI_ADDRESS_BUF_LEN]; /* MIB-statistics */ uint64_t txdata_octets; @@ -246,6 +230,7 @@ enum { }; struct iscsi_session { + struct iscsi_cls_session *cls_session; /* * Syncs up the scsi eh thread with the iscsi eh thread when sending * task management functions. This must be taken before the session @@ -281,10 +266,8 @@ struct iscsi_session { char *password; char *password_in; char *targetname; + char *ifacename; char *initiatorname; - /* hw address or netdev iscsi connection is bound to */ - char *hwaddress; - char *netdev; /* control data */ struct iscsi_transport *tt; struct Scsi_Host *host; @@ -298,12 +281,20 @@ struct iscsi_session { int state; /* session state */ int age; /* counts session re-opens */ + int scsi_cmds_max; /* max scsi commands */ int cmds_max; /* size of cmds array */ - struct iscsi_cmd_task **cmds; /* Original Cmds arr */ + struct iscsi_task **cmds; /* Original Cmds arr */ struct iscsi_pool cmdpool; /* PDU's pool */ - int mgmtpool_max; /* size of mgmt array */ - struct iscsi_mgmt_task **mgmt_cmds; /* Original mgmt arr */ - struct iscsi_pool mgmtpool; /* Mgmt PDU's pool */ +}; + +struct iscsi_host { + char *initiatorname; + /* hw address or netdev iscsi connection is bound to */ + char *hwaddress; + char *netdev; + /* local address */ + int local_port; + char local_address[ISCSI_ADDRESS_BUF_LEN]; }; /* @@ -316,42 +307,44 @@ extern int iscsi_eh_device_reset(struct scsi_cmnd *sc); extern int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)); - /* * iSCSI host helpers. */ +#define iscsi_host_priv(_shost) \ + (shost_priv(_shost) + sizeof(struct iscsi_host)) + extern int iscsi_host_set_param(struct Scsi_Host *shost, enum iscsi_host_param param, char *buf, int buflen); extern int iscsi_host_get_param(struct Scsi_Host *shost, enum iscsi_host_param param, char *buf); +extern int iscsi_host_add(struct Scsi_Host *shost, struct device *pdev); +extern struct Scsi_Host *iscsi_host_alloc(struct scsi_host_template *sht, + int dd_data_size, uint16_t qdepth); +extern void iscsi_host_remove(struct Scsi_Host *shost); +extern void iscsi_host_free(struct Scsi_Host *shost); /* * session management */ extern struct iscsi_cls_session * -iscsi_session_setup(struct iscsi_transport *, struct scsi_transport_template *, - uint16_t, uint16_t, int, int, uint32_t, uint32_t *); +iscsi_session_setup(struct iscsi_transport *, struct Scsi_Host *shost, + uint16_t, int, uint32_t, unsigned int); extern void iscsi_session_teardown(struct iscsi_cls_session *); -extern struct iscsi_session *class_to_transport_session(struct iscsi_cls_session *); extern void iscsi_session_recovery_timedout(struct iscsi_cls_session *); extern int iscsi_set_param(struct iscsi_cls_conn *cls_conn, enum iscsi_param param, char *buf, int buflen); extern int iscsi_session_get_param(struct iscsi_cls_session *cls_session, enum iscsi_param param, char *buf); -#define session_to_cls(_sess) \ - hostdata_session(_sess->host->hostdata) - #define iscsi_session_printk(prefix, _sess, fmt, a...) \ - iscsi_cls_session_printk(prefix, \ - (struct iscsi_cls_session *)session_to_cls(_sess), fmt, ##a) + iscsi_cls_session_printk(prefix, _sess->cls_session, fmt, ##a) /* * connection management */ extern struct iscsi_cls_conn *iscsi_conn_setup(struct iscsi_cls_session *, - uint32_t); + int, uint32_t); extern void iscsi_conn_teardown(struct iscsi_cls_conn *); extern int iscsi_conn_start(struct iscsi_cls_conn *); extern void iscsi_conn_stop(struct iscsi_cls_conn *, int); @@ -360,25 +353,29 @@ extern int iscsi_conn_bind(struct iscsi_cls_session *, struct iscsi_cls_conn *, extern void iscsi_conn_failure(struct iscsi_conn *conn, enum iscsi_err err); extern int iscsi_conn_get_param(struct iscsi_cls_conn *cls_conn, enum iscsi_param param, char *buf); +extern void iscsi_suspend_tx(struct iscsi_conn *conn); #define iscsi_conn_printk(prefix, _c, fmt, a...) \ - iscsi_cls_conn_printk(prefix, _c->cls_conn, fmt, ##a) + iscsi_cls_conn_printk(prefix, ((struct iscsi_conn *)_c)->cls_conn, \ + fmt, ##a) /* * pdu and task processing */ extern void iscsi_update_cmdsn(struct iscsi_session *, struct iscsi_nopin *); -extern void iscsi_prep_unsolicit_data_pdu(struct iscsi_cmd_task *, +extern void iscsi_prep_unsolicit_data_pdu(struct iscsi_task *, struct iscsi_data *hdr); extern int iscsi_conn_send_pdu(struct iscsi_cls_conn *, struct iscsi_hdr *, char *, uint32_t); extern int iscsi_complete_pdu(struct iscsi_conn *, struct iscsi_hdr *, char *, int); -extern int iscsi_verify_itt(struct iscsi_conn *, struct iscsi_hdr *, - uint32_t *); -extern void iscsi_requeue_ctask(struct iscsi_cmd_task *ctask); -extern void iscsi_free_mgmt_task(struct iscsi_conn *conn, - struct iscsi_mgmt_task *mtask); +extern int __iscsi_complete_pdu(struct iscsi_conn *, struct iscsi_hdr *, + char *, int); +extern int iscsi_verify_itt(struct iscsi_conn *, itt_t); +extern struct iscsi_task *iscsi_itt_to_ctask(struct iscsi_conn *, itt_t); +extern void iscsi_requeue_task(struct iscsi_task *task); +extern void iscsi_put_task(struct iscsi_task *task); +extern void __iscsi_get_task(struct iscsi_task *task); /* * generic helpers diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h index 32742c4563de..00137a7769ee 100644 --- a/include/scsi/scsi.h +++ b/include/scsi/scsi.h @@ -9,6 +9,7 @@ #define _SCSI_SCSI_H #include <linux/types.h> +#include <scsi/scsi_cmnd.h> /* * The maximum number of SG segments that we will put inside a @@ -400,6 +401,7 @@ struct scsi_lun { #define SOFT_ERROR 0x2005 #define ADD_TO_MLQUEUE 0x2006 #define TIMEOUT_ERROR 0x2007 +#define SCSI_RETURN_NOT_HANDLED 0x2008 /* * Midlevel queue return values. @@ -424,6 +426,22 @@ struct scsi_lun { #define driver_byte(result) (((result) >> 24) & 0xff) #define suggestion(result) (driver_byte(result) & SUGGEST_MASK) +static inline void set_msg_byte(struct scsi_cmnd *cmd, char status) +{ + cmd->result |= status << 8; +} + +static inline void set_host_byte(struct scsi_cmnd *cmd, char status) +{ + cmd->result |= status << 16; +} + +static inline void set_driver_byte(struct scsi_cmnd *cmd, char status) +{ + cmd->result |= status << 24; +} + + #define sense_class(sense) (((sense) >> 4) & 0x7) #define sense_error(sense) ((sense) & 0xf) #define sense_valid(sense) ((sense) & 0x80); diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h index 3e46dfae8194..66c944849d6b 100644 --- a/include/scsi/scsi_cmnd.h +++ b/include/scsi/scsi_cmnd.h @@ -7,7 +7,6 @@ #include <linux/types.h> #include <linux/timer.h> #include <linux/scatterlist.h> -#include <linux/blkdev.h> struct Scsi_Host; struct scsi_device; diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 00b78763a1bf..6467f78b191f 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -162,9 +162,29 @@ struct scsi_device { struct execute_work ew; /* used to get process context on put */ + struct scsi_dh_data *scsi_dh_data; enum scsi_device_state sdev_state; unsigned long sdev_data[0]; } __attribute__((aligned(sizeof(unsigned long)))); + +struct scsi_device_handler { + /* Used by the infrastructure */ + struct list_head list; /* list of scsi_device_handlers */ + struct notifier_block nb; + + /* Filled by the hardware handler */ + struct module *module; + const char *name; + int (*check_sense)(struct scsi_device *, struct scsi_sense_hdr *); + int (*activate)(struct scsi_device *); + int (*prep_fn)(struct scsi_device *, struct request *); +}; + +struct scsi_dh_data { + struct scsi_device_handler *scsi_dh; + char buf[0]; +}; + #define to_scsi_device(d) \ container_of(d, struct scsi_device, sdev_gendev) #define class_to_sdev(d) \ @@ -231,7 +251,9 @@ extern struct scsi_device *__scsi_add_device(struct Scsi_Host *, uint, uint, uint, void *hostdata); extern int scsi_add_device(struct Scsi_Host *host, uint channel, uint target, uint lun); +extern int scsi_register_device_handler(struct scsi_device_handler *scsi_dh); extern void scsi_remove_device(struct scsi_device *); +extern int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh); extern int scsi_device_get(struct scsi_device *); extern void scsi_device_put(struct scsi_device *); diff --git a/include/scsi/scsi_dh.h b/include/scsi/scsi_dh.h new file mode 100644 index 000000000000..3ad2303d1a16 --- /dev/null +++ b/include/scsi/scsi_dh.h @@ -0,0 +1,69 @@ +/* + * Header file for SCSI device handler infrastruture. + * + * Modified version of patches posted by Mike Christie <michaelc@cs.wisc.edu> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright IBM Corporation, 2007 + * Authors: + * Chandra Seetharaman <sekharan@us.ibm.com> + * Mike Anderson <andmike@linux.vnet.ibm.com> + */ + +#include <scsi/scsi_device.h> + +enum { + SCSI_DH_OK = 0, + /* + * device errors + */ + SCSI_DH_DEV_FAILED, /* generic device error */ + SCSI_DH_DEV_TEMP_BUSY, + SCSI_DH_DEVICE_MAX, /* max device blkerr definition */ + + /* + * transport errors + */ + SCSI_DH_NOTCONN = SCSI_DH_DEVICE_MAX + 1, + SCSI_DH_CONN_FAILURE, + SCSI_DH_TRANSPORT_MAX, /* max transport blkerr definition */ + + /* + * driver and generic errors + */ + SCSI_DH_IO = SCSI_DH_TRANSPORT_MAX + 1, /* generic error */ + SCSI_DH_INVALID_IO, + SCSI_DH_RETRY, /* retry the req, but not immediately */ + SCSI_DH_IMM_RETRY, /* immediately retry the req */ + SCSI_DH_TIMED_OUT, + SCSI_DH_RES_TEMP_UNAVAIL, + SCSI_DH_DEV_OFFLINED, + SCSI_DH_NOSYS, + SCSI_DH_DRIVER_MAX, +}; +#if defined(CONFIG_SCSI_DH) || defined(CONFIG_SCSI_DH_MODULE) +extern int scsi_dh_activate(struct request_queue *); +extern int scsi_dh_handler_exist(const char *); +#else +static inline int scsi_dh_activate(struct request_queue *req) +{ + return 0; +} +static inline int scsi_dh_handler_exist(const char *name) +{ + return 0; +} +#endif diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h index aab1eae2ec4c..f5444e033cc9 100644 --- a/include/scsi/scsi_transport_iscsi.h +++ b/include/scsi/scsi_transport_iscsi.h @@ -30,11 +30,11 @@ struct scsi_transport_template; struct iscsi_transport; +struct iscsi_endpoint; struct Scsi_Host; struct iscsi_cls_conn; struct iscsi_conn; -struct iscsi_cmd_task; -struct iscsi_mgmt_task; +struct iscsi_task; struct sockaddr; /** @@ -58,19 +58,22 @@ struct sockaddr; * @stop_conn: suspend/recover/terminate connection * @send_pdu: send iSCSI PDU, Login, Logout, NOP-Out, Reject, Text. * @session_recovery_timedout: notify LLD a block during recovery timed out - * @init_cmd_task: Initialize a iscsi_cmd_task and any internal structs. - * Called from queuecommand with session lock held. - * @init_mgmt_task: Initialize a iscsi_mgmt_task and any internal structs. - * Called from iscsi_conn_send_generic with xmitmutex. - * @xmit_cmd_task: Requests LLD to transfer cmd task. Returns 0 or the + * @init_task: Initialize a iscsi_task and any internal structs. + * When offloading the data path, this is called from + * queuecommand with the session lock, or from the + * iscsi_conn_send_pdu context with the session lock. + * When not offloading the data path, this is called + * from the scsi work queue without the session lock. + * @xmit_task Requests LLD to transfer cmd task. Returns 0 or the * the number of bytes transferred on success, and -Exyz - * value on error. - * @xmit_mgmt_task: Requests LLD to transfer mgmt task. Returns 0 or the - * the number of bytes transferred on success, and -Exyz - * value on error. - * @cleanup_cmd_task: requests LLD to fail cmd task. Called with xmitmutex - * and session->lock after the connection has been - * suspended and terminated during recovery. If called + * value on error. When offloading the data path, this + * is called from queuecommand with the session lock, or + * from the iscsi_conn_send_pdu context with the session + * lock. When not offloading the data path, this is called + * from the scsi work queue without the session lock. + * @cleanup_task: requests LLD to fail task. Called with session lock + * and after the connection has been suspended and + * terminated during recovery. If called * from abort task then connection is not suspended * or terminated but sk_callback_lock is held * @@ -83,17 +86,9 @@ struct iscsi_transport { /* LLD sets this to indicate what values it can export to sysfs */ uint64_t param_mask; uint64_t host_param_mask; - struct scsi_host_template *host_template; - /* LLD connection data size */ - int conndata_size; - /* LLD session data size */ - int sessiondata_size; - int max_lun; - unsigned int max_conn; - unsigned int max_cmd_len; - struct iscsi_cls_session *(*create_session) (struct iscsi_transport *it, - struct scsi_transport_template *t, uint16_t, uint16_t, - uint32_t sn, uint32_t *hn); + struct iscsi_cls_session *(*create_session) (struct iscsi_endpoint *ep, + uint16_t cmds_max, uint16_t qdepth, + uint32_t sn, uint32_t *hn); void (*destroy_session) (struct iscsi_cls_session *session); struct iscsi_cls_conn *(*create_conn) (struct iscsi_cls_session *sess, uint32_t cid); @@ -118,20 +113,15 @@ struct iscsi_transport { char *data, uint32_t data_size); void (*get_stats) (struct iscsi_cls_conn *conn, struct iscsi_stats *stats); - int (*init_cmd_task) (struct iscsi_cmd_task *ctask); - void (*init_mgmt_task) (struct iscsi_conn *conn, - struct iscsi_mgmt_task *mtask); - int (*xmit_cmd_task) (struct iscsi_conn *conn, - struct iscsi_cmd_task *ctask); - void (*cleanup_cmd_task) (struct iscsi_conn *conn, - struct iscsi_cmd_task *ctask); - int (*xmit_mgmt_task) (struct iscsi_conn *conn, - struct iscsi_mgmt_task *mtask); + int (*init_task) (struct iscsi_task *task); + int (*xmit_task) (struct iscsi_task *task); + void (*cleanup_task) (struct iscsi_conn *conn, + struct iscsi_task *task); void (*session_recovery_timedout) (struct iscsi_cls_session *session); - int (*ep_connect) (struct sockaddr *dst_addr, int non_blocking, - uint64_t *ep_handle); - int (*ep_poll) (uint64_t ep_handle, int timeout_ms); - void (*ep_disconnect) (uint64_t ep_handle); + struct iscsi_endpoint *(*ep_connect) (struct sockaddr *dst_addr, + int non_blocking); + int (*ep_poll) (struct iscsi_endpoint *ep, int timeout_ms); + void (*ep_disconnect) (struct iscsi_endpoint *ep); int (*tgt_dscvr) (struct Scsi_Host *shost, enum iscsi_tgt_dscvr type, uint32_t enable, struct sockaddr *dst_addr); }; @@ -172,9 +162,10 @@ enum { ISCSI_SESSION_FREE, }; +#define ISCSI_MAX_TARGET -1 + struct iscsi_cls_session { struct list_head sess_list; /* item in session_list */ - struct list_head host_list; struct iscsi_transport *transport; spinlock_t lock; struct work_struct block_work; @@ -186,7 +177,7 @@ struct iscsi_cls_session { int recovery_tmo; struct delayed_work recovery_work; - int target_id; + unsigned int target_id; int state; int sid; /* session id */ @@ -203,14 +194,22 @@ struct iscsi_cls_session { #define starget_to_session(_stgt) \ iscsi_dev_to_session(_stgt->dev.parent) -struct iscsi_host { - struct list_head sessions; +struct iscsi_cls_host { atomic_t nr_scans; struct mutex mutex; struct workqueue_struct *scan_workq; char scan_workq_name[KOBJ_NAME_LEN]; }; +extern void iscsi_host_for_each_session(struct Scsi_Host *shost, + void (*fn)(struct iscsi_cls_session *)); + +struct iscsi_endpoint { + void *dd_data; /* LLD private data */ + struct device dev; + unsigned int id; +}; + /* * session and connection functions that can be used by HW iSCSI LLDs */ @@ -222,22 +221,26 @@ struct iscsi_host { extern int iscsi_session_chkready(struct iscsi_cls_session *session); extern struct iscsi_cls_session *iscsi_alloc_session(struct Scsi_Host *shost, - struct iscsi_transport *transport); + struct iscsi_transport *transport, int dd_size); extern int iscsi_add_session(struct iscsi_cls_session *session, unsigned int target_id); extern int iscsi_session_event(struct iscsi_cls_session *session, enum iscsi_uevent_e event); extern struct iscsi_cls_session *iscsi_create_session(struct Scsi_Host *shost, struct iscsi_transport *t, + int dd_size, unsigned int target_id); extern void iscsi_remove_session(struct iscsi_cls_session *session); extern void iscsi_free_session(struct iscsi_cls_session *session); extern int iscsi_destroy_session(struct iscsi_cls_session *session); extern struct iscsi_cls_conn *iscsi_create_conn(struct iscsi_cls_session *sess, - uint32_t cid); + int dd_size, uint32_t cid); extern int iscsi_destroy_conn(struct iscsi_cls_conn *conn); extern void iscsi_unblock_session(struct iscsi_cls_session *session); extern void iscsi_block_session(struct iscsi_cls_session *session); extern int iscsi_scan_finished(struct Scsi_Host *shost, unsigned long time); +extern struct iscsi_endpoint *iscsi_create_endpoint(int dd_size); +extern void iscsi_destroy_endpoint(struct iscsi_endpoint *ep); +extern struct iscsi_endpoint *iscsi_lookup_endpoint(u64 handle); #endif diff --git a/include/scsi/sd.h b/include/scsi/sd.h deleted file mode 100644 index 4f032d48cb6e..000000000000 --- a/include/scsi/sd.h +++ /dev/null @@ -1,57 +0,0 @@ -#ifndef _SCSI_DISK_H -#define _SCSI_DISK_H - -/* - * More than enough for everybody ;) The huge number of majors - * is a leftover from 16bit dev_t days, we don't really need that - * much numberspace. - */ -#define SD_MAJORS 16 - -/* - * This is limited by the naming scheme enforced in sd_probe, - * add another character to it if you really need more disks. - */ -#define SD_MAX_DISKS (((26 * 26) + 26 + 1) * 26) - -/* - * Time out in seconds for disks and Magneto-opticals (which are slower). - */ -#define SD_TIMEOUT (30 * HZ) -#define SD_MOD_TIMEOUT (75 * HZ) - -/* - * Number of allowed retries - */ -#define SD_MAX_RETRIES 5 -#define SD_PASSTHROUGH_RETRIES 1 - -/* - * Size of the initial data buffer for mode and read capacity data - */ -#define SD_BUF_SIZE 512 - -struct scsi_disk { - struct scsi_driver *driver; /* always &sd_template */ - struct scsi_device *device; - struct device dev; - struct gendisk *disk; - unsigned int openers; /* protected by BKL for now, yuck */ - sector_t capacity; /* size in 512-byte sectors */ - u32 index; - u8 media_present; - u8 write_prot; - unsigned previous_state : 1; - unsigned WCE : 1; /* state of disk WCE bit */ - unsigned RCD : 1; /* state of disk RCD bit, unused */ - unsigned DPOFUA : 1; /* state of disk DPOFUA bit */ -}; -#define to_scsi_disk(obj) container_of(obj,struct scsi_disk,dev) - -#define sd_printk(prefix, sdsk, fmt, a...) \ - (sdsk)->disk ? \ - sdev_printk(prefix, (sdsk)->device, "[%s] " fmt, \ - (sdsk)->disk->disk_name, ##a) : \ - sdev_printk(prefix, (sdsk)->device, fmt, ##a) - -#endif /* _SCSI_DISK_H */ diff --git a/include/scsi/sg.h b/include/scsi/sg.h index 519c49a0fc11..934ae389671d 100644 --- a/include/scsi/sg.h +++ b/include/scsi/sg.h @@ -206,6 +206,7 @@ typedef struct sg_req_info { /* used by SG_GET_REQUEST_TABLE ioctl() */ #define SG_SCSI_RESET_DEVICE 1 #define SG_SCSI_RESET_BUS 2 #define SG_SCSI_RESET_HOST 3 +#define SG_SCSI_RESET_TARGET 4 /* synchronous SCSI command ioctl, (only in version 3 interface) */ #define SG_IO 0x2285 /* similar effect as write() followed by read() */ |