summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/linux/ieee80211.h16
-rw-r--r--include/linux/if.h1
-rw-r--r--include/linux/rfkill.h3
-rw-r--r--include/linux/spi/wl12xx.h1
-rw-r--r--include/net/cfg80211.h85
-rw-r--r--include/net/mac80211.h51
6 files changed, 111 insertions, 46 deletions
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 49b1abd2fe97..afa8e0ac27a7 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -115,7 +115,6 @@
#define IEEE80211_MAX_SSID_LEN 32
#define IEEE80211_MAX_MESH_ID_LEN 32
-#define IEEE80211_MESH_CONFIG_LEN 7
#define IEEE80211_QOS_CTL_LEN 2
#define IEEE80211_QOS_CTL_TID_MASK 0x000F
@@ -555,6 +554,21 @@ struct ieee80211_tim_ie {
} __attribute__ ((packed));
/**
+ * struct ieee80211_meshconf_ie
+ *
+ * This structure refers to "Mesh Configuration information element"
+ */
+struct ieee80211_meshconf_ie {
+ u8 meshconf_psel;
+ u8 meshconf_pmetric;
+ u8 meshconf_congest;
+ u8 meshconf_synch;
+ u8 meshconf_auth;
+ u8 meshconf_form;
+ u8 meshconf_cap;
+} __attribute__ ((packed));
+
+/**
* struct ieee80211_rann_ie
*
* This structure refers to "Root Announcement information element"
diff --git a/include/linux/if.h b/include/linux/if.h
index 3b2a46bf8f8d..3a9f410a296b 100644
--- a/include/linux/if.h
+++ b/include/linux/if.h
@@ -70,6 +70,7 @@
#define IFF_XMIT_DST_RELEASE 0x400 /* dev_hard_start_xmit() is allowed to
* release skb->dst
*/
+#define IFF_DONT_BRIDGE 0x800 /* disallow bridging this ether dev */
#define IF_GET_IFACE 0x0001 /* for querying only */
#define IF_GET_PROTO 0x0002
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index 3392c59d2706..97059d08a626 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -35,6 +35,8 @@
* @RFKILL_TYPE_UWB: switch is on a ultra wideband device.
* @RFKILL_TYPE_WIMAX: switch is on a WiMAX device.
* @RFKILL_TYPE_WWAN: switch is on a wireless WAN device.
+ * @RFKILL_TYPE_GPS: switch is on a GPS device.
+ * @RFKILL_TYPE_FM: switch is on a FM radio device.
* @NUM_RFKILL_TYPES: number of defined rfkill types
*/
enum rfkill_type {
@@ -45,6 +47,7 @@ enum rfkill_type {
RFKILL_TYPE_WIMAX,
RFKILL_TYPE_WWAN,
RFKILL_TYPE_GPS,
+ RFKILL_TYPE_FM,
NUM_RFKILL_TYPES,
};
diff --git a/include/linux/spi/wl12xx.h b/include/linux/spi/wl12xx.h
index 11430cab2aad..aed64ed3dc8a 100644
--- a/include/linux/spi/wl12xx.h
+++ b/include/linux/spi/wl12xx.h
@@ -26,6 +26,7 @@
struct wl12xx_platform_data {
void (*set_power)(bool enable);
+ bool use_eeprom;
};
#endif
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 21710fc17eaf..a6492e9bca97 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1108,27 +1108,50 @@ struct cfg80211_ops {
*/
/**
- * struct wiphy - wireless hardware description
- * @idx: the wiphy index assigned to this item
- * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name>
- * @custom_regulatory: tells us the driver for this device
+ * enum wiphy_flags - wiphy capability flags
+ *
+ * @WIPHY_FLAG_CUSTOM_REGULATORY: tells us the driver for this device
* has its own custom regulatory domain and cannot identify the
* ISO / IEC 3166 alpha2 it belongs to. When this is enabled
* we will disregard the first regulatory hint (when the
* initiator is %REGDOM_SET_BY_CORE).
- * @strict_regulatory: tells us the driver for this device will ignore
- * regulatory domain settings until it gets its own regulatory domain
- * via its regulatory_hint(). After its gets its own regulatory domain
- * it will only allow further regulatory domain settings to further
- * enhance compliance. For example if channel 13 and 14 are disabled
- * by this regulatory domain no user regulatory domain can enable these
- * channels at a later time. This can be used for devices which do not
- * have calibration information gauranteed for frequencies or settings
- * outside of its regulatory domain.
- * @disable_beacon_hints: enable this if your driver needs to ensure that
- * passive scan flags and beaconing flags may not be lifted by cfg80211
- * due to regulatory beacon hints. For more information on beacon
+ * @WIPHY_FLAG_STRICT_REGULATORY: tells us the driver for this device will
+ * ignore regulatory domain settings until it gets its own regulatory
+ * domain via its regulatory_hint(). After its gets its own regulatory
+ * domain it will only allow further regulatory domain settings to
+ * further enhance compliance. For example if channel 13 and 14 are
+ * disabled by this regulatory domain no user regulatory domain can
+ * enable these channels at a later time. This can be used for devices
+ * which do not have calibration information gauranteed for frequencies
+ * or settings outside of its regulatory domain.
+ * @WIPHY_FLAG_DISABLE_BEACON_HINTS: enable this if your driver needs to ensure
+ * that passive scan flags and beaconing flags may not be lifted by
+ * cfg80211 due to regulatory beacon hints. For more information on beacon
* hints read the documenation for regulatory_hint_found_beacon()
+ * @WIPHY_FLAG_NETNS_OK: if not set, do not allow changing the netns of this
+ * wiphy at all
+ * @WIPHY_FLAG_PS_ON_BY_DEFAULT: if set to true, powersave will be enabled
+ * by default -- this flag will be set depending on the kernel's default
+ * on wiphy_new(), but can be changed by the driver if it has a good
+ * reason to override the default
+ * @WIPHY_FLAG_4ADDR_AP: supports 4addr mode even on AP (with a single station
+ * on a VLAN interface)
+ * @WIPHY_FLAG_4ADDR_STATION: supports 4addr mode even as a station
+ */
+enum wiphy_flags {
+ WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0),
+ WIPHY_FLAG_STRICT_REGULATORY = BIT(1),
+ WIPHY_FLAG_DISABLE_BEACON_HINTS = BIT(2),
+ WIPHY_FLAG_NETNS_OK = BIT(3),
+ WIPHY_FLAG_PS_ON_BY_DEFAULT = BIT(4),
+ WIPHY_FLAG_4ADDR_AP = BIT(5),
+ WIPHY_FLAG_4ADDR_STATION = BIT(6),
+};
+
+/**
+ * struct wiphy - wireless hardware description
+ * @idx: the wiphy index assigned to this item
+ * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name>
* @reg_notifier: the driver's regulatory notification callback
* @regd: the driver's regulatory domain, if one was requested via
* the regulatory_hint() API. This can be used by the driver
@@ -1143,11 +1166,6 @@ struct cfg80211_ops {
* -1 = fragmentation disabled, only odd values >= 256 used
* @rts_threshold: RTS threshold (dot11RTSThreshold); -1 = RTS/CTS disabled
* @net: the network namespace this wiphy currently lives in
- * @netnsok: if set to false, do not allow changing the netns of this
- * wiphy at all
- * @ps_default: default for powersave, will be set depending on the
- * kernel's default on wiphy_new(), but can be changed by the
- * driver if it has a good reason to override the default
*/
struct wiphy {
/* assign these fields before you register the wiphy */
@@ -1158,12 +1176,7 @@ struct wiphy {
/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
u16 interface_modes;
- bool custom_regulatory;
- bool strict_regulatory;
- bool disable_beacon_hints;
-
- bool netnsok;
- bool ps_default;
+ u32 flags;
enum cfg80211_signal_type signal_type;
@@ -1358,6 +1371,10 @@ struct cfg80211_cached_keys;
* @ssid_len: (private) Used by the internal configuration code
* @wext: (private) Used by the internal wireless extensions compat code
* @wext_bssid: (private) Used by the internal wireless extensions compat code
+ * @use_4addr: indicates 4addr mode is used on this interface, must be
+ * set by driver (if supported) on add_interface BEFORE registering the
+ * netdev and may otherwise be used by driver read-only, will be update
+ * by cfg80211 on change_interface
*/
struct wireless_dev {
struct wiphy *wiphy;
@@ -1371,6 +1388,8 @@ struct wireless_dev {
struct work_struct cleanup_work;
+ bool use_4addr;
+
/* currently used for IBSS and SME - might be rearranged later */
u8 ssid[IEEE80211_MAX_SSID_LEN];
u8 ssid_len;
@@ -1820,6 +1839,18 @@ void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len);
void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr);
/**
+ * __cfg80211_auth_canceled - notify cfg80211 that authentication was canceled
+ * @dev: network device
+ * @addr: The MAC address of the device with which the authentication timed out
+ *
+ * When a pending authentication had no action yet, the driver may decide
+ * to not send a deauth frame, but in that case must calls this function
+ * to tell cfg80211 about this decision. It is only valid to call this
+ * function within the deauth() callback.
+ */
+void __cfg80211_auth_canceled(struct net_device *dev, const u8 *addr);
+
+/**
* cfg80211_send_rx_assoc - notification of processed association
* @dev: network device
* @buf: (re)association response frame (header + body)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 2c10eac637d8..3754ea405c88 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -219,7 +219,7 @@ struct ieee80211_bss_conf {
*
* These flags are used with the @flags member of &ieee80211_tx_info.
*
- * @IEEE80211_TX_CTL_REQ_TX_STATUS: request TX status callback for this frame.
+ * @IEEE80211_TX_CTL_REQ_TX_STATUS: require TX status callback for this frame.
* @IEEE80211_TX_CTL_ASSIGN_SEQ: The driver has to assign a sequence
* number to this frame, taking care of not overwriting the fragment
* number and increasing the sequence number only when the
@@ -390,10 +390,12 @@ struct ieee80211_tx_rate {
* @control: union for control data
* @status: union for status data
* @driver_data: array of driver_data pointers
- * @ampdu_ack_len: number of aggregated frames.
+ * @ampdu_ack_len: number of acked aggregated frames.
* relevant only if IEEE80211_TX_STATUS_AMPDU was set.
* @ampdu_ack_map: block ack bit map for the aggregation.
* relevant only if IEEE80211_TX_STATUS_AMPDU was set.
+ * @ampdu_len: number of aggregated frames.
+ * relevant only if IEEE80211_TX_STATUS_AMPDU was set.
* @ack_signal: signal strength of the ACK frame
*/
struct ieee80211_tx_info {
@@ -428,7 +430,8 @@ struct ieee80211_tx_info {
u8 ampdu_ack_len;
u64 ampdu_ack_map;
int ack_signal;
- /* 8 bytes free */
+ u8 ampdu_len;
+ /* 7 bytes free */
} status;
struct {
struct ieee80211_tx_rate driver_rates[
@@ -852,6 +855,19 @@ enum ieee80211_tkip_key_type {
* any particular flags. There are some exceptions to this rule,
* however, so you are advised to review these flags carefully.
*
+ * @IEEE80211_HW_HAS_RATE_CONTROL:
+ * The hardware or firmware includes rate control, and cannot be
+ * controlled by the stack. As such, no rate control algorithm
+ * should be instantiated, and the TX rate reported to userspace
+ * will be taken from the TX status instead of the rate control
+ * algorithm.
+ * Note that this requires that the driver implement a number of
+ * callbacks so it has the correct information, it needs to have
+ * the @set_rts_threshold callback and must look at the BSS config
+ * @use_cts_prot for G/N protection, @use_short_slot for slot
+ * timing in 2.4 GHz and @use_short_preamble for preambles for
+ * CCK frames.
+ *
* @IEEE80211_HW_RX_INCLUDES_FCS:
* Indicates that received frames passed to the stack include
* the FCS at the end.
@@ -910,6 +926,7 @@ enum ieee80211_tkip_key_type {
* avoid waking up cpu.
*/
enum ieee80211_hw_flags {
+ IEEE80211_HW_HAS_RATE_CONTROL = 1<<0,
IEEE80211_HW_RX_INCLUDES_FCS = 1<<1,
IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING = 1<<2,
IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE = 1<<3,
@@ -1505,6 +1522,7 @@ struct ieee80211_ops {
void (*reset_tsf)(struct ieee80211_hw *hw);
int (*tx_last_beacon)(struct ieee80211_hw *hw);
int (*ampdu_action)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
enum ieee80211_ampdu_mlme_action action,
struct ieee80211_sta *sta, u16 tid, u16 *ssn);
@@ -2026,8 +2044,7 @@ void ieee80211_queue_delayed_work(struct ieee80211_hw *hw,
/**
* ieee80211_start_tx_ba_session - Start a tx Block Ack session.
- * @hw: pointer as obtained from ieee80211_alloc_hw().
- * @ra: receiver address of the BA session recipient
+ * @sta: the station for which to start a BA session
* @tid: the TID to BA on.
*
* Return: success if addBA request was sent, failure otherwise
@@ -2036,22 +2053,22 @@ void ieee80211_queue_delayed_work(struct ieee80211_hw *hw,
* the need to start aggregation on a certain RA/TID, the session level
* will be managed by the mac80211.
*/
-int ieee80211_start_tx_ba_session(struct ieee80211_hw *hw, u8 *ra, u16 tid);
+int ieee80211_start_tx_ba_session(struct ieee80211_sta *sta, u16 tid);
/**
* ieee80211_start_tx_ba_cb - low level driver ready to aggregate.
- * @hw: pointer as obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf
* @ra: receiver address of the BA session recipient.
* @tid: the TID to BA on.
*
* This function must be called by low level driver once it has
* finished with preparations for the BA session.
*/
-void ieee80211_start_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u16 tid);
+void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid);
/**
* ieee80211_start_tx_ba_cb_irqsafe - low level driver ready to aggregate.
- * @hw: pointer as obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf
* @ra: receiver address of the BA session recipient.
* @tid: the TID to BA on.
*
@@ -2059,13 +2076,12 @@ void ieee80211_start_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u16 tid);
* finished with preparations for the BA session.
* This version of the function is IRQ-safe.
*/
-void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, const u8 *ra,
+void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, const u8 *ra,
u16 tid);
/**
* ieee80211_stop_tx_ba_session - Stop a Block Ack session.
- * @hw: pointer as obtained from ieee80211_alloc_hw().
- * @ra: receiver address of the BA session recipient
+ * @sta: the station whose BA session to stop
* @tid: the TID to stop BA.
* @initiator: if indicates initiator DELBA frame will be sent.
*
@@ -2075,24 +2091,23 @@ void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, const u8 *ra,
* the need to stop aggregation on a certain RA/TID, the session level
* will be managed by the mac80211.
*/
-int ieee80211_stop_tx_ba_session(struct ieee80211_hw *hw,
- u8 *ra, u16 tid,
+int ieee80211_stop_tx_ba_session(struct ieee80211_sta *sta, u16 tid,
enum ieee80211_back_parties initiator);
/**
* ieee80211_stop_tx_ba_cb - low level driver ready to stop aggregate.
- * @hw: pointer as obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf
* @ra: receiver address of the BA session recipient.
* @tid: the desired TID to BA on.
*
* This function must be called by low level driver once it has
* finished with preparations for the BA session tear down.
*/
-void ieee80211_stop_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u8 tid);
+void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid);
/**
* ieee80211_stop_tx_ba_cb_irqsafe - low level driver ready to stop aggregate.
- * @hw: pointer as obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf
* @ra: receiver address of the BA session recipient.
* @tid: the desired TID to BA on.
*
@@ -2100,7 +2115,7 @@ void ieee80211_stop_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u8 tid);
* finished with preparations for the BA session tear down.
* This version of the function is IRQ-safe.
*/
-void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, const u8 *ra,
+void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, const u8 *ra,
u16 tid);
/**