diff options
Diffstat (limited to 'include/uapi/linux/ethtool.h')
-rw-r--r-- | include/uapi/linux/ethtool.h | 437 |
1 files changed, 362 insertions, 75 deletions
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 57fa39005e79..2835b07416b7 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -13,15 +13,21 @@ #ifndef _UAPI_LINUX_ETHTOOL_H #define _UAPI_LINUX_ETHTOOL_H +#include <linux/kernel.h> #include <linux/types.h> #include <linux/if_ether.h> +#ifndef __KERNEL__ +#include <limits.h> /* for INT_MAX */ +#endif + /* All structures exposed to userland should be defined such that they * have the same layout for 32-bit and 64-bit userland. */ /** - * struct ethtool_cmd - link control and status + * struct ethtool_cmd - DEPRECATED, link control and status + * This structure is DEPRECATED, please use struct ethtool_link_settings. * @cmd: Command number = %ETHTOOL_GSET or %ETHTOOL_SSET * @supported: Bitmask of %SUPPORTED_* flags for the link modes, * physical connectors and other link features for which the @@ -31,7 +37,7 @@ * physical connectors and other link features that are * advertised through autonegotiation or enabled for * auto-detection. - * @speed: Low bits of the speed + * @speed: Low bits of the speed, 1Mb units, 0 to INT_MAX or SPEED_UNKNOWN * @duplex: Duplex mode; one of %DUPLEX_* * @port: Physical connector type; one of %PORT_* * @phy_address: MDIO address of PHY (transceiver); 0 or 255 if not @@ -47,7 +53,7 @@ * obsoleted by &struct ethtool_coalesce. Read-only; deprecated. * @maxrxpkt: Historically used to report RX IRQ coalescing; now * obsoleted by &struct ethtool_coalesce. Read-only; deprecated. - * @speed_hi: High bits of the speed + * @speed_hi: High bits of the speed, 1Mb units, 0 to INT_MAX or SPEED_UNKNOWN * @eth_tp_mdix: Ethernet twisted-pair MDI(-X) status; one of * %ETH_TP_MDI_*. If the status is unknown or not applicable, the * value will be %ETH_TP_MDI_INVALID. Read-only. @@ -748,6 +754,56 @@ struct ethtool_usrip4_spec { __u8 proto; }; +/** + * struct ethtool_tcpip6_spec - flow specification for TCP/IPv6 etc. + * @ip6src: Source host + * @ip6dst: Destination host + * @psrc: Source port + * @pdst: Destination port + * @tclass: Traffic Class + * + * This can be used to specify a TCP/IPv6, UDP/IPv6 or SCTP/IPv6 flow. + */ +struct ethtool_tcpip6_spec { + __be32 ip6src[4]; + __be32 ip6dst[4]; + __be16 psrc; + __be16 pdst; + __u8 tclass; +}; + +/** + * struct ethtool_ah_espip6_spec - flow specification for IPsec/IPv6 + * @ip6src: Source host + * @ip6dst: Destination host + * @spi: Security parameters index + * @tclass: Traffic Class + * + * This can be used to specify an IPsec transport or tunnel over IPv6. + */ +struct ethtool_ah_espip6_spec { + __be32 ip6src[4]; + __be32 ip6dst[4]; + __be32 spi; + __u8 tclass; +}; + +/** + * struct ethtool_usrip6_spec - general flow specification for IPv6 + * @ip6src: Source host + * @ip6dst: Destination host + * @l4_4_bytes: First 4 bytes of transport (layer 4) header + * @tclass: Traffic Class + * @l4_proto: Transport protocol number (nexthdr after any Extension Headers) + */ +struct ethtool_usrip6_spec { + __be32 ip6src[4]; + __be32 ip6dst[4]; + __be32 l4_4_bytes; + __u8 tclass; + __u8 l4_proto; +}; + union ethtool_flow_union { struct ethtool_tcpip4_spec tcp_ip4_spec; struct ethtool_tcpip4_spec udp_ip4_spec; @@ -755,6 +811,12 @@ union ethtool_flow_union { struct ethtool_ah_espip4_spec ah_ip4_spec; struct ethtool_ah_espip4_spec esp_ip4_spec; struct ethtool_usrip4_spec usr_ip4_spec; + struct ethtool_tcpip6_spec tcp_ip6_spec; + struct ethtool_tcpip6_spec udp_ip6_spec; + struct ethtool_tcpip6_spec sctp_ip6_spec; + struct ethtool_ah_espip6_spec ah_ip6_spec; + struct ethtool_ah_espip6_spec esp_ip6_spec; + struct ethtool_usrip6_spec usr_ip6_spec; struct ethhdr ether_spec; __u8 hdata[52]; }; @@ -1146,10 +1208,29 @@ enum ethtool_sfeatures_retval_bits { #define ETHTOOL_F_WISH (1 << ETHTOOL_F_WISH__BIT) #define ETHTOOL_F_COMPAT (1 << ETHTOOL_F_COMPAT__BIT) +#define MAX_NUM_QUEUE 4096 + +/** + * struct ethtool_per_queue_op - apply sub command to the queues in mask. + * @cmd: ETHTOOL_PERQUEUE + * @sub_command: the sub command which apply to each queues + * @queue_mask: Bitmap of the queues which sub command apply to + * @data: A complete command structure following for each of the queues addressed + */ +struct ethtool_per_queue_op { + __u32 cmd; + __u32 sub_command; + __u32 queue_mask[__KERNEL_DIV_ROUND_UP(MAX_NUM_QUEUE, 32)]; + char data[]; +}; /* CMDs currently supported */ -#define ETHTOOL_GSET 0x00000001 /* Get settings. */ -#define ETHTOOL_SSET 0x00000002 /* Set settings. */ +#define ETHTOOL_GSET 0x00000001 /* DEPRECATED, Get settings. + * Please use ETHTOOL_GLINKSETTINGS + */ +#define ETHTOOL_SSET 0x00000002 /* DEPRECATED, Set settings. + * Please use ETHTOOL_SLINKSETTINGS + */ #define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */ #define ETHTOOL_GREGS 0x00000004 /* Get NIC registers. */ #define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */ @@ -1229,73 +1310,141 @@ enum ethtool_sfeatures_retval_bits { #define ETHTOOL_STUNABLE 0x00000049 /* Set tunable configuration */ #define ETHTOOL_GPHYSTATS 0x0000004a /* get PHY-specific statistics */ +#define ETHTOOL_PERQUEUE 0x0000004b /* Set per queue options */ + +#define ETHTOOL_GLINKSETTINGS 0x0000004c /* Get ethtool_link_settings */ +#define ETHTOOL_SLINKSETTINGS 0x0000004d /* Set ethtool_link_settings */ + + /* compatibility with older code */ #define SPARC_ETH_GSET ETHTOOL_GSET #define SPARC_ETH_SSET ETHTOOL_SSET -#define SUPPORTED_10baseT_Half (1 << 0) -#define SUPPORTED_10baseT_Full (1 << 1) -#define SUPPORTED_100baseT_Half (1 << 2) -#define SUPPORTED_100baseT_Full (1 << 3) -#define SUPPORTED_1000baseT_Half (1 << 4) -#define SUPPORTED_1000baseT_Full (1 << 5) -#define SUPPORTED_Autoneg (1 << 6) -#define SUPPORTED_TP (1 << 7) -#define SUPPORTED_AUI (1 << 8) -#define SUPPORTED_MII (1 << 9) -#define SUPPORTED_FIBRE (1 << 10) -#define SUPPORTED_BNC (1 << 11) -#define SUPPORTED_10000baseT_Full (1 << 12) -#define SUPPORTED_Pause (1 << 13) -#define SUPPORTED_Asym_Pause (1 << 14) -#define SUPPORTED_2500baseX_Full (1 << 15) -#define SUPPORTED_Backplane (1 << 16) -#define SUPPORTED_1000baseKX_Full (1 << 17) -#define SUPPORTED_10000baseKX4_Full (1 << 18) -#define SUPPORTED_10000baseKR_Full (1 << 19) -#define SUPPORTED_10000baseR_FEC (1 << 20) -#define SUPPORTED_20000baseMLD2_Full (1 << 21) -#define SUPPORTED_20000baseKR2_Full (1 << 22) -#define SUPPORTED_40000baseKR4_Full (1 << 23) -#define SUPPORTED_40000baseCR4_Full (1 << 24) -#define SUPPORTED_40000baseSR4_Full (1 << 25) -#define SUPPORTED_40000baseLR4_Full (1 << 26) -#define SUPPORTED_56000baseKR4_Full (1 << 27) -#define SUPPORTED_56000baseCR4_Full (1 << 28) -#define SUPPORTED_56000baseSR4_Full (1 << 29) -#define SUPPORTED_56000baseLR4_Full (1 << 30) - -#define ADVERTISED_10baseT_Half (1 << 0) -#define ADVERTISED_10baseT_Full (1 << 1) -#define ADVERTISED_100baseT_Half (1 << 2) -#define ADVERTISED_100baseT_Full (1 << 3) -#define ADVERTISED_1000baseT_Half (1 << 4) -#define ADVERTISED_1000baseT_Full (1 << 5) -#define ADVERTISED_Autoneg (1 << 6) -#define ADVERTISED_TP (1 << 7) -#define ADVERTISED_AUI (1 << 8) -#define ADVERTISED_MII (1 << 9) -#define ADVERTISED_FIBRE (1 << 10) -#define ADVERTISED_BNC (1 << 11) -#define ADVERTISED_10000baseT_Full (1 << 12) -#define ADVERTISED_Pause (1 << 13) -#define ADVERTISED_Asym_Pause (1 << 14) -#define ADVERTISED_2500baseX_Full (1 << 15) -#define ADVERTISED_Backplane (1 << 16) -#define ADVERTISED_1000baseKX_Full (1 << 17) -#define ADVERTISED_10000baseKX4_Full (1 << 18) -#define ADVERTISED_10000baseKR_Full (1 << 19) -#define ADVERTISED_10000baseR_FEC (1 << 20) -#define ADVERTISED_20000baseMLD2_Full (1 << 21) -#define ADVERTISED_20000baseKR2_Full (1 << 22) -#define ADVERTISED_40000baseKR4_Full (1 << 23) -#define ADVERTISED_40000baseCR4_Full (1 << 24) -#define ADVERTISED_40000baseSR4_Full (1 << 25) -#define ADVERTISED_40000baseLR4_Full (1 << 26) -#define ADVERTISED_56000baseKR4_Full (1 << 27) -#define ADVERTISED_56000baseCR4_Full (1 << 28) -#define ADVERTISED_56000baseSR4_Full (1 << 29) -#define ADVERTISED_56000baseLR4_Full (1 << 30) +/* Link mode bit indices */ +enum ethtool_link_mode_bit_indices { + ETHTOOL_LINK_MODE_10baseT_Half_BIT = 0, + ETHTOOL_LINK_MODE_10baseT_Full_BIT = 1, + ETHTOOL_LINK_MODE_100baseT_Half_BIT = 2, + ETHTOOL_LINK_MODE_100baseT_Full_BIT = 3, + ETHTOOL_LINK_MODE_1000baseT_Half_BIT = 4, + ETHTOOL_LINK_MODE_1000baseT_Full_BIT = 5, + ETHTOOL_LINK_MODE_Autoneg_BIT = 6, + ETHTOOL_LINK_MODE_TP_BIT = 7, + ETHTOOL_LINK_MODE_AUI_BIT = 8, + ETHTOOL_LINK_MODE_MII_BIT = 9, + ETHTOOL_LINK_MODE_FIBRE_BIT = 10, + ETHTOOL_LINK_MODE_BNC_BIT = 11, + ETHTOOL_LINK_MODE_10000baseT_Full_BIT = 12, + ETHTOOL_LINK_MODE_Pause_BIT = 13, + ETHTOOL_LINK_MODE_Asym_Pause_BIT = 14, + ETHTOOL_LINK_MODE_2500baseX_Full_BIT = 15, + ETHTOOL_LINK_MODE_Backplane_BIT = 16, + ETHTOOL_LINK_MODE_1000baseKX_Full_BIT = 17, + ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT = 18, + ETHTOOL_LINK_MODE_10000baseKR_Full_BIT = 19, + ETHTOOL_LINK_MODE_10000baseR_FEC_BIT = 20, + ETHTOOL_LINK_MODE_20000baseMLD2_Full_BIT = 21, + ETHTOOL_LINK_MODE_20000baseKR2_Full_BIT = 22, + ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT = 23, + ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT = 24, + ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT = 25, + ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT = 26, + ETHTOOL_LINK_MODE_56000baseKR4_Full_BIT = 27, + ETHTOOL_LINK_MODE_56000baseCR4_Full_BIT = 28, + ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT = 29, + ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT = 30, + + /* Last allowed bit for __ETHTOOL_LINK_MODE_LEGACY_MASK is bit + * 31. Please do NOT define any SUPPORTED_* or ADVERTISED_* + * macro for bits > 31. The only way to use indices > 31 is to + * use the new ETHTOOL_GLINKSETTINGS/ETHTOOL_SLINKSETTINGS API. + */ + + __ETHTOOL_LINK_MODE_LAST + = ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT, +}; + +#define __ETHTOOL_LINK_MODE_LEGACY_MASK(base_name) \ + (1UL << (ETHTOOL_LINK_MODE_ ## base_name ## _BIT)) + +/* DEPRECATED macros. Please migrate to + * ETHTOOL_GLINKSETTINGS/ETHTOOL_SLINKSETTINGS API. Please do NOT + * define any new SUPPORTED_* macro for bits > 31. + */ +#define SUPPORTED_10baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(10baseT_Half) +#define SUPPORTED_10baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10baseT_Full) +#define SUPPORTED_100baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(100baseT_Half) +#define SUPPORTED_100baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(100baseT_Full) +#define SUPPORTED_1000baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseT_Half) +#define SUPPORTED_1000baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseT_Full) +#define SUPPORTED_Autoneg __ETHTOOL_LINK_MODE_LEGACY_MASK(Autoneg) +#define SUPPORTED_TP __ETHTOOL_LINK_MODE_LEGACY_MASK(TP) +#define SUPPORTED_AUI __ETHTOOL_LINK_MODE_LEGACY_MASK(AUI) +#define SUPPORTED_MII __ETHTOOL_LINK_MODE_LEGACY_MASK(MII) +#define SUPPORTED_FIBRE __ETHTOOL_LINK_MODE_LEGACY_MASK(FIBRE) +#define SUPPORTED_BNC __ETHTOOL_LINK_MODE_LEGACY_MASK(BNC) +#define SUPPORTED_10000baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseT_Full) +#define SUPPORTED_Pause __ETHTOOL_LINK_MODE_LEGACY_MASK(Pause) +#define SUPPORTED_Asym_Pause __ETHTOOL_LINK_MODE_LEGACY_MASK(Asym_Pause) +#define SUPPORTED_2500baseX_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(2500baseX_Full) +#define SUPPORTED_Backplane __ETHTOOL_LINK_MODE_LEGACY_MASK(Backplane) +#define SUPPORTED_1000baseKX_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseKX_Full) +#define SUPPORTED_10000baseKX4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseKX4_Full) +#define SUPPORTED_10000baseKR_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseKR_Full) +#define SUPPORTED_10000baseR_FEC __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseR_FEC) +#define SUPPORTED_20000baseMLD2_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(20000baseMLD2_Full) +#define SUPPORTED_20000baseKR2_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(20000baseKR2_Full) +#define SUPPORTED_40000baseKR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseKR4_Full) +#define SUPPORTED_40000baseCR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseCR4_Full) +#define SUPPORTED_40000baseSR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseSR4_Full) +#define SUPPORTED_40000baseLR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseLR4_Full) +#define SUPPORTED_56000baseKR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseKR4_Full) +#define SUPPORTED_56000baseCR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseCR4_Full) +#define SUPPORTED_56000baseSR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseSR4_Full) +#define SUPPORTED_56000baseLR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseLR4_Full) +/* Please do not define any new SUPPORTED_* macro for bits > 31, see + * notice above. + */ + +/* + * DEPRECATED macros. Please migrate to + * ETHTOOL_GLINKSETTINGS/ETHTOOL_SLINKSETTINGS API. Please do NOT + * define any new ADERTISE_* macro for bits > 31. + */ +#define ADVERTISED_10baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(10baseT_Half) +#define ADVERTISED_10baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10baseT_Full) +#define ADVERTISED_100baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(100baseT_Half) +#define ADVERTISED_100baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(100baseT_Full) +#define ADVERTISED_1000baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseT_Half) +#define ADVERTISED_1000baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseT_Full) +#define ADVERTISED_Autoneg __ETHTOOL_LINK_MODE_LEGACY_MASK(Autoneg) +#define ADVERTISED_TP __ETHTOOL_LINK_MODE_LEGACY_MASK(TP) +#define ADVERTISED_AUI __ETHTOOL_LINK_MODE_LEGACY_MASK(AUI) +#define ADVERTISED_MII __ETHTOOL_LINK_MODE_LEGACY_MASK(MII) +#define ADVERTISED_FIBRE __ETHTOOL_LINK_MODE_LEGACY_MASK(FIBRE) +#define ADVERTISED_BNC __ETHTOOL_LINK_MODE_LEGACY_MASK(BNC) +#define ADVERTISED_10000baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseT_Full) +#define ADVERTISED_Pause __ETHTOOL_LINK_MODE_LEGACY_MASK(Pause) +#define ADVERTISED_Asym_Pause __ETHTOOL_LINK_MODE_LEGACY_MASK(Asym_Pause) +#define ADVERTISED_2500baseX_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(2500baseX_Full) +#define ADVERTISED_Backplane __ETHTOOL_LINK_MODE_LEGACY_MASK(Backplane) +#define ADVERTISED_1000baseKX_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseKX_Full) +#define ADVERTISED_10000baseKX4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseKX4_Full) +#define ADVERTISED_10000baseKR_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseKR_Full) +#define ADVERTISED_10000baseR_FEC __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseR_FEC) +#define ADVERTISED_20000baseMLD2_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(20000baseMLD2_Full) +#define ADVERTISED_20000baseKR2_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(20000baseKR2_Full) +#define ADVERTISED_40000baseKR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseKR4_Full) +#define ADVERTISED_40000baseCR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseCR4_Full) +#define ADVERTISED_40000baseSR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseSR4_Full) +#define ADVERTISED_40000baseLR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseLR4_Full) +#define ADVERTISED_56000baseKR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseKR4_Full) +#define ADVERTISED_56000baseCR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseCR4_Full) +#define ADVERTISED_56000baseSR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseSR4_Full) +#define ADVERTISED_56000baseLR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseLR4_Full) +/* Please do not define any new ADVERTISED_* macro for bits > 31, see + * notice above. + */ /* The following are all involved in forcing a particular link * mode for the device for setting things. When getting the @@ -1303,7 +1452,7 @@ enum ethtool_sfeatures_retval_bits { * it was forced up into this mode or autonegotiated. */ -/* The forced speed, 10Mb, 100Mb, gigabit, [2.5|5|10|20|25|40|50|56|100]GbE. */ +/* The forced speed, in units of 1Mb. All values 0 to INT_MAX are legal. */ #define SPEED_10 10 #define SPEED_100 100 #define SPEED_1000 1000 @@ -1319,11 +1468,28 @@ enum ethtool_sfeatures_retval_bits { #define SPEED_UNKNOWN -1 +static inline int ethtool_validate_speed(__u32 speed) +{ + return speed <= INT_MAX || speed == SPEED_UNKNOWN; +} + /* Duplex, half or full. */ #define DUPLEX_HALF 0x00 #define DUPLEX_FULL 0x01 #define DUPLEX_UNKNOWN 0xff +static inline int ethtool_validate_duplex(__u8 duplex) +{ + switch (duplex) { + case DUPLEX_HALF: + case DUPLEX_FULL: + case DUPLEX_UNKNOWN: + return 1; + } + + return 0; +} + /* Which connector port. */ #define PORT_TP 0x00 #define PORT_AUI 0x01 @@ -1367,15 +1533,17 @@ enum ethtool_sfeatures_retval_bits { #define UDP_V4_FLOW 0x02 /* hash or spec (udp_ip4_spec) */ #define SCTP_V4_FLOW 0x03 /* hash or spec (sctp_ip4_spec) */ #define AH_ESP_V4_FLOW 0x04 /* hash only */ -#define TCP_V6_FLOW 0x05 /* hash only */ -#define UDP_V6_FLOW 0x06 /* hash only */ -#define SCTP_V6_FLOW 0x07 /* hash only */ +#define TCP_V6_FLOW 0x05 /* hash or spec (tcp_ip6_spec; nfc only) */ +#define UDP_V6_FLOW 0x06 /* hash or spec (udp_ip6_spec; nfc only) */ +#define SCTP_V6_FLOW 0x07 /* hash or spec (sctp_ip6_spec; nfc only) */ #define AH_ESP_V6_FLOW 0x08 /* hash only */ #define AH_V4_FLOW 0x09 /* hash or spec (ah_ip4_spec) */ #define ESP_V4_FLOW 0x0a /* hash or spec (esp_ip4_spec) */ -#define AH_V6_FLOW 0x0b /* hash only */ -#define ESP_V6_FLOW 0x0c /* hash only */ -#define IP_USER_FLOW 0x0d /* spec only (usr_ip4_spec) */ +#define AH_V6_FLOW 0x0b /* hash or spec (ah_ip6_spec; nfc only) */ +#define ESP_V6_FLOW 0x0c /* hash or spec (esp_ip6_spec; nfc only) */ +#define IPV4_USER_FLOW 0x0d /* spec only (usr_ip4_spec) */ +#define IP_USER_FLOW IPV4_USER_FLOW +#define IPV6_USER_FLOW 0x0e /* spec only (usr_ip6_spec; nfc only) */ #define IPV4_FLOW 0x10 /* hash only */ #define IPV6_FLOW 0x11 /* hash only */ #define ETHER_FLOW 0x12 /* spec only (ether_spec) */ @@ -1441,4 +1609,123 @@ enum ethtool_reset_flags { }; #define ETH_RESET_SHARED_SHIFT 16 + +/** + * struct ethtool_link_settings - link control and status + * + * IMPORTANT, Backward compatibility notice: When implementing new + * user-space tools, please first try %ETHTOOL_GLINKSETTINGS, and + * if it succeeds use %ETHTOOL_SLINKSETTINGS to change link + * settings; do not use %ETHTOOL_SSET if %ETHTOOL_GLINKSETTINGS + * succeeded: stick to %ETHTOOL_GLINKSETTINGS/%SLINKSETTINGS in + * that case. Conversely, if %ETHTOOL_GLINKSETTINGS fails, use + * %ETHTOOL_GSET to query and %ETHTOOL_SSET to change link + * settings; do not use %ETHTOOL_SLINKSETTINGS if + * %ETHTOOL_GLINKSETTINGS failed: stick to + * %ETHTOOL_GSET/%ETHTOOL_SSET in that case. + * + * @cmd: Command number = %ETHTOOL_GLINKSETTINGS or %ETHTOOL_SLINKSETTINGS + * @speed: Link speed (Mbps) + * @duplex: Duplex mode; one of %DUPLEX_* + * @port: Physical connector type; one of %PORT_* + * @phy_address: MDIO address of PHY (transceiver); 0 or 255 if not + * applicable. For clause 45 PHYs this is the PRTAD. + * @autoneg: Enable/disable autonegotiation and auto-detection; + * either %AUTONEG_DISABLE or %AUTONEG_ENABLE + * @mdio_support: Bitmask of %ETH_MDIO_SUPPORTS_* flags for the MDIO + * protocols supported by the interface; 0 if unknown. + * Read-only. + * @eth_tp_mdix: Ethernet twisted-pair MDI(-X) status; one of + * %ETH_TP_MDI_*. If the status is unknown or not applicable, the + * value will be %ETH_TP_MDI_INVALID. Read-only. + * @eth_tp_mdix_ctrl: Ethernet twisted pair MDI(-X) control; one of + * %ETH_TP_MDI_*. If MDI(-X) control is not implemented, reads + * yield %ETH_TP_MDI_INVALID and writes may be ignored or rejected. + * When written successfully, the link should be renegotiated if + * necessary. + * @link_mode_masks_nwords: Number of 32-bit words for each of the + * supported, advertising, lp_advertising link mode bitmaps. For + * %ETHTOOL_GLINKSETTINGS: on entry, number of words passed by user + * (>= 0); on return, if handshake in progress, negative if + * request size unsupported by kernel: absolute value indicates + * kernel recommended size and cmd field is 0, as well as all the + * other fields; otherwise (handshake completed), strictly + * positive to indicate size used by kernel and cmd field is + * %ETHTOOL_GLINKSETTINGS, all other fields populated by driver. For + * %ETHTOOL_SLINKSETTINGS: must be valid on entry, ie. a positive + * value returned previously by %ETHTOOL_GLINKSETTINGS, otherwise + * refused. For drivers: ignore this field (use kernel's + * __ETHTOOL_LINK_MODE_MASK_NBITS instead), any change to it will + * be overwritten by kernel. + * @supported: Bitmap with each bit meaning given by + * %ethtool_link_mode_bit_indices for the link modes, physical + * connectors and other link features for which the interface + * supports autonegotiation or auto-detection. Read-only. + * @advertising: Bitmap with each bit meaning given by + * %ethtool_link_mode_bit_indices for the link modes, physical + * connectors and other link features that are advertised through + * autonegotiation or enabled for auto-detection. + * @lp_advertising: Bitmap with each bit meaning given by + * %ethtool_link_mode_bit_indices for the link modes, and other + * link features that the link partner advertised through + * autonegotiation; 0 if unknown or not applicable. Read-only. + * + * If autonegotiation is disabled, the speed and @duplex represent the + * fixed link mode and are writable if the driver supports multiple + * link modes. If it is enabled then they are read-only; if the link + * is up they represent the negotiated link mode; if the link is down, + * the speed is 0, %SPEED_UNKNOWN or the highest enabled speed and + * @duplex is %DUPLEX_UNKNOWN or the best enabled duplex mode. + * + * Some hardware interfaces may have multiple PHYs and/or physical + * connectors fitted or do not allow the driver to detect which are + * fitted. For these interfaces @port and/or @phy_address may be + * writable, possibly dependent on @autoneg being %AUTONEG_DISABLE. + * Otherwise, attempts to write different values may be ignored or + * rejected. + * + * Deprecated %ethtool_cmd fields transceiver, maxtxpkt and maxrxpkt + * are not available in %ethtool_link_settings. Until all drivers are + * converted to ignore them or to the new %ethtool_link_settings API, + * for both queries and changes, users should always try + * %ETHTOOL_GLINKSETTINGS first, and if it fails with -ENOTSUPP stick + * only to %ETHTOOL_GSET and %ETHTOOL_SSET consistently. If it + * succeeds, then users should stick to %ETHTOOL_GLINKSETTINGS and + * %ETHTOOL_SLINKSETTINGS (which would support drivers implementing + * either %ethtool_cmd or %ethtool_link_settings). + * + * Users should assume that all fields not marked read-only are + * writable and subject to validation by the driver. They should use + * %ETHTOOL_GLINKSETTINGS to get the current values before making specific + * changes and then applying them with %ETHTOOL_SLINKSETTINGS. + * + * Drivers that implement %get_link_ksettings and/or + * %set_link_ksettings should ignore the @cmd + * and @link_mode_masks_nwords fields (any change to them overwritten + * by kernel), and rely only on kernel's internal + * %__ETHTOOL_LINK_MODE_MASK_NBITS and + * %ethtool_link_mode_mask_t. Drivers that implement + * %set_link_ksettings() should validate all fields other than @cmd + * and @link_mode_masks_nwords that are not described as read-only or + * deprecated, and must ignore all fields described as read-only. + */ +struct ethtool_link_settings { + __u32 cmd; + __u32 speed; + __u8 duplex; + __u8 port; + __u8 phy_address; + __u8 autoneg; + __u8 mdio_support; + __u8 eth_tp_mdix; + __u8 eth_tp_mdix_ctrl; + __s8 link_mode_masks_nwords; + __u32 reserved[8]; + __u32 link_mode_masks[0]; + /* layout of link_mode_masks fields: + * __u32 map_supported[link_mode_masks_nwords]; + * __u32 map_advertising[link_mode_masks_nwords]; + * __u32 map_lp_advertising[link_mode_masks_nwords]; + */ +}; #endif /* _UAPI_LINUX_ETHTOOL_H */ |