diff options
Diffstat (limited to 'include/net/cfg80211.h')
| -rw-r--r-- | include/net/cfg80211.h | 28 |
1 files changed, 21 insertions, 7 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 996782c44838..c7e641071eff 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -374,6 +374,7 @@ struct ieee80211_sta_he_cap { * and NSS Set field" * * @only_20mhz: MCS/NSS support for 20 MHz-only STA. + * @bw: MCS/NSS support for 80, 160 and 320 MHz * @bw._80: MCS/NSS support for BW <= 80 MHz * @bw._160: MCS/NSS support for BW = 160 MHz * @bw._320: MCS/NSS support for BW = 320 MHz @@ -420,6 +421,7 @@ struct ieee80211_sta_eht_cap { * @he_cap: holds the HE capabilities * @he_6ghz_capa: HE 6 GHz capabilities, must be filled in for a * 6 GHz band channel (and 0 may be valid value). + * @eht_cap: STA's EHT capabilities * @vendor_elems: vendor element(s) to advertise * @vendor_elems.data: vendor element(s) data * @vendor_elems.len: vendor element(s) length @@ -495,7 +497,7 @@ struct ieee80211_edmg { * This structure describes most essential parameters needed * to describe 802.11ah S1G capabilities for a STA. * - * @s1g_supported: is STA an S1G STA + * @s1g: is STA an S1G STA * @cap: S1G capabilities information * @nss_mcs: Supported NSS MCS set */ @@ -1373,8 +1375,8 @@ struct cfg80211_csa_settings { * Used for bss color change * * @beacon_color_change: beacon data while performing the color countdown - * @counter_offsets_beacon: offsets of the counters within the beacon (tail) - * @counter_offsets_presp: offsets of the counters within the probe response + * @counter_offset_beacon: offsets of the counters within the beacon (tail) + * @counter_offset_presp: offsets of the counters within the probe response * @beacon_next: beacon data to be used after the color change * @count: number of beacons until the color change * @color: the color used after the change @@ -1417,6 +1419,7 @@ struct iface_combination_params { * @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp) * @STATION_PARAM_APPLY_CAPABILITY: apply new capability * @STATION_PARAM_APPLY_PLINK_STATE: apply new plink state + * @STATION_PARAM_APPLY_STA_TXPOWER: apply tx power for STA * * Not all station parameters have in-band "no change" signalling, * for those that don't these flags will are used. @@ -2149,6 +2152,9 @@ struct bss_parameters { * @plink_timeout: If no tx activity is seen from a STA we've established * peering with for longer than this time (in seconds), then remove it * from the STA's list of peers. Default is 30 minutes. + * @dot11MeshConnectedToAuthServer: if set to true then this mesh STA + * will advertise that it is connected to a authentication server + * in the mesh formation field. * @dot11MeshConnectedToMeshGate: if set to true, advertise that this STA is * connected to a mesh gate in mesh formation info. If false, the * value in mesh formation is determined by the presence of root paths @@ -2321,12 +2327,12 @@ struct cfg80211_scan_info { /** * struct cfg80211_scan_6ghz_params - relevant for 6 GHz only * - * @short_bssid: short ssid to scan for + * @short_ssid: short ssid to scan for * @bssid: bssid to scan for * @channel_idx: idx of the channel in the channel array in the scan request * which the above info relvant to * @unsolicited_probe: the AP transmits unsolicited probe response every 20 TU - * @short_ssid_valid: short_ssid is valid and can be used + * @short_ssid_valid: @short_ssid is valid and can be used * @psc_no_listen: when set, and the channel is a PSC channel, no need to wait * 20 TUs before starting to send probe requests. */ @@ -3317,7 +3323,7 @@ struct cfg80211_wowlan_wakeup { * @kck: key confirmation key (@kck_len bytes) * @replay_ctr: replay counter (NL80211_REPLAY_CTR_LEN bytes) * @kek_len: length of kek - * @kck_len length of kck + * @kck_len: length of kck * @akm: akm (oui, id) */ struct cfg80211_gtk_rekey_data { @@ -3679,6 +3685,7 @@ struct cfg80211_pmsr_ftm_result { * @type: type of the measurement reported, note that we only support reporting * one type at a time, but you can report multiple results separately and * they're all aggregated for userspace. + * @ftm: FTM result */ struct cfg80211_pmsr_result { u64 host_time, ap_tsf; @@ -3817,7 +3824,7 @@ struct cfg80211_update_owe_info { * for the entire device * @interface_stypes: bitmap of management frame subtypes registered * for the given interface - * @global_mcast_rx: mcast RX is needed globally for these subtypes + * @global_mcast_stypes: mcast RX is needed globally for these subtypes * @interface_mcast_stypes: mcast RX is needed on this interface * for these subtypes */ @@ -4940,6 +4947,7 @@ struct wiphy_iftype_ext_capab { * @max_peers: maximum number of peers in a single measurement * @report_ap_tsf: can report assoc AP's TSF for radio resource measurement * @randomize_mac_addr: can randomize MAC address for measurement + * @ftm: FTM measurement data * @ftm.supported: FTM measurement is supported * @ftm.asap: ASAP-mode is supported * @ftm.non_asap: non-ASAP-mode is supported @@ -5563,6 +5571,7 @@ static inline void wiphy_unlock(struct wiphy *wiphy) * @netdev: (private) Used to reference back to the netdev, may be %NULL * @identifier: (private) Identifier used in nl80211 to identify this * wireless device if it has no netdev + * @u: union containing data specific to @iftype * @connected_addr: (private) BSSID or AP MLD address if connected * @connected: indicates if connected or not (STA mode) * @current_bss: (private) Used by the internal configuration code @@ -5624,6 +5633,9 @@ static inline void wiphy_unlock(struct wiphy *wiphy) * @pmsr_free_wk: (private) peer measurements cleanup work * @unprot_beacon_reported: (private) timestamp of last * unprotected beacon report + * @links: array of %IEEE80211_MLD_MAX_NUM_LINKS elements containing @addr + * @ap and @client for each link + * @valid_links: bitmap describing what elements of @links are valid */ struct wireless_dev { struct wiphy *wiphy; @@ -6068,6 +6080,7 @@ unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr); * @addr: the device MAC address * @iftype: the virtual interface type * @data_offset: offset of payload after the 802.11 header + * @is_amsdu: true if the 802.11 header is A-MSDU * Return: 0 on success. Non-zero on error. */ int ieee80211_data_to_8023_exthdr(struct sk_buff *skb, struct ethhdr *ehdr, @@ -6937,6 +6950,7 @@ void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, * @macaddr: the MAC address of the new candidate * @ie: information elements advertised by the peer candidate * @ie_len: length of the information elements buffer + * @sig_dbm: signal level in dBm * @gfp: allocation flags * * This function notifies cfg80211 that the mesh peer candidate has been |