diff options
Diffstat (limited to 'include/linux')
394 files changed, 11606 insertions, 7409 deletions
diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 5b57367e28db..7fe2dae251e5 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -1,31 +1,5 @@ -header-y += byteorder/ -header-y += can/ -header-y += caif/ header-y += dvb/ header-y += hdlc/ header-y += hsi/ -header-y += isdn/ -header-y += mmc/ -header-y += nfsd/ header-y += raid/ -header-y += spi/ -header-y += sunrpc/ -header-y += tc_act/ -header-y += tc_ematch/ -header-y += netfilter/ -header-y += netfilter_arp/ -header-y += netfilter_bridge/ -header-y += netfilter_ipv4/ -header-y += netfilter_ipv6/ header-y += usb/ -header-y += wimax/ - -ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \ - $(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h),) -endif -ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \ - $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm.h),) -endif -ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h \ - $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm_para.h),) -endif diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 90be98981102..3994d7790b23 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -25,7 +25,9 @@ #ifndef _LINUX_ACPI_H #define _LINUX_ACPI_H +#include <linux/errno.h> #include <linux/ioport.h> /* for struct resource */ +#include <linux/device.h> #ifdef CONFIG_ACPI @@ -76,6 +78,14 @@ typedef int (*acpi_table_handler) (struct acpi_table_header *table); typedef int (*acpi_table_entry_handler) (struct acpi_subtable_header *header, const unsigned long end); +#ifdef CONFIG_ACPI_INITRD_TABLE_OVERRIDE +void acpi_initrd_override(void *data, size_t size); +#else +static inline void acpi_initrd_override(void *data, size_t size) +{ +} +#endif + char * __acpi_map_table (unsigned long phys_addr, unsigned long size); void __acpi_unmap_table(char *map, unsigned long size); int early_acpi_boot_init(void); @@ -250,6 +260,26 @@ extern int pnpacpi_disabled; #define PXM_INVAL (-1) +bool acpi_dev_resource_memory(struct acpi_resource *ares, struct resource *res); +bool acpi_dev_resource_io(struct acpi_resource *ares, struct resource *res); +bool acpi_dev_resource_address_space(struct acpi_resource *ares, + struct resource *res); +bool acpi_dev_resource_ext_address_space(struct acpi_resource *ares, + struct resource *res); +unsigned long acpi_dev_irq_flags(u8 triggering, u8 polarity, u8 shareable); +bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index, + struct resource *res); + +struct resource_list_entry { + struct list_head node; + struct resource res; +}; + +void acpi_dev_free_resource_list(struct list_head *list); +int acpi_dev_get_resources(struct acpi_device *adev, struct list_head *list, + int (*preproc)(struct acpi_resource *, void *), + void *preproc_data); + int acpi_check_resource_conflict(const struct resource *res); int acpi_check_region(resource_size_t start, resource_size_t n, @@ -257,10 +287,14 @@ int acpi_check_region(resource_size_t start, resource_size_t n, int acpi_resources_are_enforced(void); -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_HIBERNATION void __init acpi_no_s4_hw_signature(void); +#endif + +#ifdef CONFIG_PM_SLEEP void __init acpi_old_suspend_ordering(void); void __init acpi_nvs_nosave(void); +void __init acpi_nvs_nosave_s3(void); #endif /* CONFIG_PM_SLEEP */ struct acpi_osc_context { @@ -364,6 +398,17 @@ extern int acpi_nvs_register(__u64 start, __u64 size); extern int acpi_nvs_for_each_region(int (*func)(__u64, __u64, void *), void *data); +const struct acpi_device_id *acpi_match_device(const struct acpi_device_id *ids, + const struct device *dev); + +static inline bool acpi_driver_match_device(struct device *dev, + const struct device_driver *drv) +{ + return !!acpi_match_device(drv->acpi_match_table, dev); +} + +#define ACPI_PTR(_ptr) (_ptr) + #else /* !CONFIG_ACPI */ #define acpi_disabled 1 @@ -418,6 +463,22 @@ static inline int acpi_nvs_for_each_region(int (*func)(__u64, __u64, void *), return 0; } +struct acpi_device_id; + +static inline const struct acpi_device_id *acpi_match_device( + const struct acpi_device_id *ids, const struct device *dev) +{ + return NULL; +} + +static inline bool acpi_driver_match_device(struct device *dev, + const struct device_driver *drv) +{ + return false; +} + +#define ACPI_PTR(_ptr) (NULL) + #endif /* !CONFIG_ACPI */ #ifdef CONFIG_ACPI @@ -426,8 +487,96 @@ void acpi_os_set_prepare_sleep(int (*func)(u8 sleep_state, acpi_status acpi_os_prepare_sleep(u8 sleep_state, u32 pm1a_control, u32 pm1b_control); +#ifdef CONFIG_X86 +void arch_reserve_mem_area(acpi_physical_address addr, size_t size); +#else +static inline void arch_reserve_mem_area(acpi_physical_address addr, + size_t size) +{ +} +#endif /* CONFIG_X86 */ #else #define acpi_os_set_prepare_sleep(func, pm1a_ctrl, pm1b_ctrl) do { } while (0) #endif +#if defined(CONFIG_ACPI) && defined(CONFIG_PM_RUNTIME) +int acpi_dev_runtime_suspend(struct device *dev); +int acpi_dev_runtime_resume(struct device *dev); +int acpi_subsys_runtime_suspend(struct device *dev); +int acpi_subsys_runtime_resume(struct device *dev); +#else +static inline int acpi_dev_runtime_suspend(struct device *dev) { return 0; } +static inline int acpi_dev_runtime_resume(struct device *dev) { return 0; } +static inline int acpi_subsys_runtime_suspend(struct device *dev) { return 0; } +static inline int acpi_subsys_runtime_resume(struct device *dev) { return 0; } +#endif + +#ifdef CONFIG_ACPI_SLEEP +int acpi_dev_suspend_late(struct device *dev); +int acpi_dev_resume_early(struct device *dev); +int acpi_subsys_prepare(struct device *dev); +int acpi_subsys_suspend_late(struct device *dev); +int acpi_subsys_resume_early(struct device *dev); +#else +static inline int acpi_dev_suspend_late(struct device *dev) { return 0; } +static inline int acpi_dev_resume_early(struct device *dev) { return 0; } +static inline int acpi_subsys_prepare(struct device *dev) { return 0; } +static inline int acpi_subsys_suspend_late(struct device *dev) { return 0; } +static inline int acpi_subsys_resume_early(struct device *dev) { return 0; } +#endif + +#if defined(CONFIG_ACPI) && defined(CONFIG_PM) +int acpi_dev_pm_attach(struct device *dev, bool power_on); +void acpi_dev_pm_detach(struct device *dev, bool power_off); +#else +static inline int acpi_dev_pm_attach(struct device *dev, bool power_on) +{ + return -ENODEV; +} +static inline void acpi_dev_pm_detach(struct device *dev, bool power_off) {} +#endif + +#ifdef CONFIG_ACPI +__printf(3, 4) +void acpi_handle_printk(const char *level, acpi_handle handle, + const char *fmt, ...); +#else /* !CONFIG_ACPI */ +static inline __printf(3, 4) void +acpi_handle_printk(const char *level, void *handle, const char *fmt, ...) {} +#endif /* !CONFIG_ACPI */ + +/* + * acpi_handle_<level>: Print message with ACPI prefix and object path + * + * These interfaces acquire the global namespace mutex to obtain an object + * path. In interrupt context, it shows the object path as <n/a>. + */ +#define acpi_handle_emerg(handle, fmt, ...) \ + acpi_handle_printk(KERN_EMERG, handle, fmt, ##__VA_ARGS__) +#define acpi_handle_alert(handle, fmt, ...) \ + acpi_handle_printk(KERN_ALERT, handle, fmt, ##__VA_ARGS__) +#define acpi_handle_crit(handle, fmt, ...) \ + acpi_handle_printk(KERN_CRIT, handle, fmt, ##__VA_ARGS__) +#define acpi_handle_err(handle, fmt, ...) \ + acpi_handle_printk(KERN_ERR, handle, fmt, ##__VA_ARGS__) +#define acpi_handle_warn(handle, fmt, ...) \ + acpi_handle_printk(KERN_WARNING, handle, fmt, ##__VA_ARGS__) +#define acpi_handle_notice(handle, fmt, ...) \ + acpi_handle_printk(KERN_NOTICE, handle, fmt, ##__VA_ARGS__) +#define acpi_handle_info(handle, fmt, ...) \ + acpi_handle_printk(KERN_INFO, handle, fmt, ##__VA_ARGS__) + +/* REVISIT: Support CONFIG_DYNAMIC_DEBUG when necessary */ +#if defined(DEBUG) || defined(CONFIG_DYNAMIC_DEBUG) +#define acpi_handle_debug(handle, fmt, ...) \ + acpi_handle_printk(KERN_DEBUG, handle, fmt, ##__VA_ARGS__) +#else +#define acpi_handle_debug(handle, fmt, ...) \ +({ \ + if (0) \ + acpi_handle_printk(KERN_DEBUG, handle, fmt, ##__VA_ARGS__); \ + 0; \ +}) +#endif + #endif /*_LINUX_ACPI_H*/ diff --git a/include/linux/acpi_gpio.h b/include/linux/acpi_gpio.h new file mode 100644 index 000000000000..91615a389b65 --- /dev/null +++ b/include/linux/acpi_gpio.h @@ -0,0 +1,19 @@ +#ifndef _LINUX_ACPI_GPIO_H_ +#define _LINUX_ACPI_GPIO_H_ + +#include <linux/errno.h> + +#ifdef CONFIG_GPIO_ACPI + +int acpi_get_gpio(char *path, int pin); + +#else /* CONFIG_GPIO_ACPI */ + +static inline int acpi_get_gpio(char *path, int pin) +{ + return -ENODEV; +} + +#endif /* CONFIG_GPIO_ACPI */ + +#endif /* _LINUX_ACPI_GPIO_H_ */ diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index d36417158d8f..43ec7e247a80 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -71,6 +71,16 @@ struct amba_device *amba_ahb_device_add(struct device *parent, const char *name, resource_size_t base, size_t size, int irq1, int irq2, void *pdata, unsigned int periphid); +struct amba_device * +amba_apb_device_add_res(struct device *parent, const char *name, + resource_size_t base, size_t size, int irq1, + int irq2, void *pdata, unsigned int periphid, + struct resource *resbase); +struct amba_device * +amba_ahb_device_add_res(struct device *parent, const char *name, + resource_size_t base, size_t size, int irq1, + int irq2, void *pdata, unsigned int periphid, + struct resource *resbase); void amba_device_unregister(struct amba_device *); struct amba_device *amba_find_device(const char *, struct device *, unsigned int, unsigned int); int amba_request_regions(struct amba_device *, const char *); diff --git a/include/linux/asn1.h b/include/linux/asn1.h index 5c3f4e4b9a23..eed6982860ba 100644 --- a/include/linux/asn1.h +++ b/include/linux/asn1.h @@ -64,4 +64,6 @@ enum asn1_tag { ASN1_LONG_TAG = 31 /* Long form tag */ }; +#define ASN1_INDEFINITE_LENGTH 0x80 + #endif /* _LINUX_ASN1_H */ diff --git a/include/linux/ata_platform.h b/include/linux/ata_platform.h index b856a2a590d9..fe9989636b62 100644 --- a/include/linux/ata_platform.h +++ b/include/linux/ata_platform.h @@ -22,8 +22,6 @@ extern int __devinit __pata_platform_probe(struct device *dev, unsigned int ioport_shift, int __pio_mask); -extern int __devexit __pata_platform_remove(struct device *dev); - /* * Marvell SATA private data */ diff --git a/include/linux/ath9k_platform.h b/include/linux/ath9k_platform.h index 6e3f54f37844..fcdd81bd5314 100644 --- a/include/linux/ath9k_platform.h +++ b/include/linux/ath9k_platform.h @@ -22,6 +22,8 @@ #define ATH9K_PLAT_EEP_MAX_WORDS 2048 struct ath9k_platform_data { + const char *eeprom_name; + u16 eeprom_data[ATH9K_PLAT_EEP_MAX_WORDS]; u8 *macaddr; diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h index 22ef21c33d0c..c1da539f5e28 100644 --- a/include/linux/atmdev.h +++ b/include/linux/atmdev.h @@ -99,6 +99,7 @@ struct atm_vcc { struct atm_dev *dev; /* device back pointer */ struct atm_qos qos; /* QOS */ struct atm_sap sap; /* SAP */ + void (*release_cb)(struct atm_vcc *vcc); /* release_sock callback */ void (*push)(struct atm_vcc *vcc,struct sk_buff *skb); void (*pop)(struct atm_vcc *vcc,struct sk_buff *skb); /* optional */ int (*push_oam)(struct atm_vcc *vcc,void *cell); @@ -106,6 +107,7 @@ struct atm_vcc { void *dev_data; /* per-device data */ void *proto_data; /* per-protocol data */ struct k_atm_aal_stats *stats; /* pointer to AAL stats group */ + struct module *owner; /* owner of ->push function */ /* SVC part --- may move later ------------------------------------- */ short itf; /* interface number */ struct sockaddr_atmsvc local; diff --git a/include/linux/atmel-ssc.h b/include/linux/atmel-ssc.h index 4eb31752e2b7..deb0ae58b99b 100644 --- a/include/linux/atmel-ssc.h +++ b/include/linux/atmel-ssc.h @@ -5,10 +5,16 @@ #include <linux/list.h> #include <linux/io.h> +struct atmel_ssc_platform_data { + int use_dma; +}; + struct ssc_device { struct list_head list; + resource_size_t phybase; void __iomem *regs; struct platform_device *pdev; + struct atmel_ssc_platform_data *pdata; struct clk *clk; int user; int irq; diff --git a/include/linux/backlight.h b/include/linux/backlight.h index 5ffc6dda4675..da9a0825e007 100644 --- a/include/linux/backlight.h +++ b/include/linux/backlight.h @@ -134,4 +134,14 @@ struct generic_bl_info { void (*kick_battery)(void); }; +#ifdef CONFIG_OF +struct backlight_device *of_find_backlight_by_node(struct device_node *node); +#else +static inline struct backlight_device * +of_find_backlight_by_node(struct device_node *node) +{ + return NULL; +} +#endif + #endif diff --git a/include/linux/balloon_compaction.h b/include/linux/balloon_compaction.h new file mode 100644 index 000000000000..f7f1d7169b11 --- /dev/null +++ b/include/linux/balloon_compaction.h @@ -0,0 +1,272 @@ +/* + * include/linux/balloon_compaction.h + * + * Common interface definitions for making balloon pages movable by compaction. + * + * Despite being perfectly possible to perform ballooned pages migration, they + * make a special corner case to compaction scans because balloon pages are not + * enlisted at any LRU list like the other pages we do compact / migrate. + * + * As the page isolation scanning step a compaction thread does is a lockless + * procedure (from a page standpoint), it might bring some racy situations while + * performing balloon page compaction. In order to sort out these racy scenarios + * and safely perform balloon's page compaction and migration we must, always, + * ensure following these three simple rules: + * + * i. when updating a balloon's page ->mapping element, strictly do it under + * the following lock order, independently of the far superior + * locking scheme (lru_lock, balloon_lock): + * +-page_lock(page); + * +--spin_lock_irq(&b_dev_info->pages_lock); + * ... page->mapping updates here ... + * + * ii. before isolating or dequeueing a balloon page from the balloon device + * pages list, the page reference counter must be raised by one and the + * extra refcount must be dropped when the page is enqueued back into + * the balloon device page list, thus a balloon page keeps its reference + * counter raised only while it is under our special handling; + * + * iii. after the lockless scan step have selected a potential balloon page for + * isolation, re-test the page->mapping flags and the page ref counter + * under the proper page lock, to ensure isolating a valid balloon page + * (not yet isolated, nor under release procedure) + * + * The functions provided by this interface are placed to help on coping with + * the aforementioned balloon page corner case, as well as to ensure the simple + * set of exposed rules are satisfied while we are dealing with balloon pages + * compaction / migration. + * + * Copyright (C) 2012, Red Hat, Inc. Rafael Aquini <aquini@redhat.com> + */ +#ifndef _LINUX_BALLOON_COMPACTION_H +#define _LINUX_BALLOON_COMPACTION_H +#include <linux/pagemap.h> +#include <linux/page-flags.h> +#include <linux/migrate.h> +#include <linux/gfp.h> +#include <linux/err.h> + +/* + * Balloon device information descriptor. + * This struct is used to allow the common balloon compaction interface + * procedures to find the proper balloon device holding memory pages they'll + * have to cope for page compaction / migration, as well as it serves the + * balloon driver as a page book-keeper for its registered balloon devices. + */ +struct balloon_dev_info { + void *balloon_device; /* balloon device descriptor */ + struct address_space *mapping; /* balloon special page->mapping */ + unsigned long isolated_pages; /* # of isolated pages for migration */ + spinlock_t pages_lock; /* Protection to pages list */ + struct list_head pages; /* Pages enqueued & handled to Host */ +}; + +extern struct page *balloon_page_enqueue(struct balloon_dev_info *b_dev_info); +extern struct page *balloon_page_dequeue(struct balloon_dev_info *b_dev_info); +extern struct balloon_dev_info *balloon_devinfo_alloc( + void *balloon_dev_descriptor); + +static inline void balloon_devinfo_free(struct balloon_dev_info *b_dev_info) +{ + kfree(b_dev_info); +} + +/* + * balloon_page_free - release a balloon page back to the page free lists + * @page: ballooned page to be set free + * + * This function must be used to properly set free an isolated/dequeued balloon + * page at the end of a sucessful page migration, or at the balloon driver's + * page release procedure. + */ +static inline void balloon_page_free(struct page *page) +{ + /* + * Balloon pages always get an extra refcount before being isolated + * and before being dequeued to help on sorting out fortuite colisions + * between a thread attempting to isolate and another thread attempting + * to release the very same balloon page. + * + * Before we handle the page back to Buddy, lets drop its extra refcnt. + */ + put_page(page); + __free_page(page); +} + +#ifdef CONFIG_BALLOON_COMPACTION +extern bool balloon_page_isolate(struct page *page); +extern void balloon_page_putback(struct page *page); +extern int balloon_page_migrate(struct page *newpage, + struct page *page, enum migrate_mode mode); +extern struct address_space +*balloon_mapping_alloc(struct balloon_dev_info *b_dev_info, + const struct address_space_operations *a_ops); + +static inline void balloon_mapping_free(struct address_space *balloon_mapping) +{ + kfree(balloon_mapping); +} + +/* + * page_flags_cleared - helper to perform balloon @page ->flags tests. + * + * As balloon pages are obtained from buddy and we do not play with page->flags + * at driver level (exception made when we get the page lock for compaction), + * we can safely identify a ballooned page by checking if the + * PAGE_FLAGS_CHECK_AT_PREP page->flags are all cleared. This approach also + * helps us skip ballooned pages that are locked for compaction or release, thus + * mitigating their racy check at balloon_page_movable() + */ +static inline bool page_flags_cleared(struct page *page) +{ + return !(page->flags & PAGE_FLAGS_CHECK_AT_PREP); +} + +/* + * __is_movable_balloon_page - helper to perform @page mapping->flags tests + */ +static inline bool __is_movable_balloon_page(struct page *page) +{ + struct address_space *mapping = page->mapping; + return mapping_balloon(mapping); +} + +/* + * balloon_page_movable - test page->mapping->flags to identify balloon pages + * that can be moved by compaction/migration. + * + * This function is used at core compaction's page isolation scheme, therefore + * most pages exposed to it are not enlisted as balloon pages and so, to avoid + * undesired side effects like racing against __free_pages(), we cannot afford + * holding the page locked while testing page->mapping->flags here. + * + * As we might return false positives in the case of a balloon page being just + * released under us, the page->mapping->flags need to be re-tested later, + * under the proper page lock, at the functions that will be coping with the + * balloon page case. + */ +static inline bool balloon_page_movable(struct page *page) +{ + /* + * Before dereferencing and testing mapping->flags, let's make sure + * this is not a page that uses ->mapping in a different way + */ + if (page_flags_cleared(page) && !page_mapped(page) && + page_count(page) == 1) + return __is_movable_balloon_page(page); + + return false; +} + +/* + * balloon_page_insert - insert a page into the balloon's page list and make + * the page->mapping assignment accordingly. + * @page : page to be assigned as a 'balloon page' + * @mapping : allocated special 'balloon_mapping' + * @head : balloon's device page list head + * + * Caller must ensure the page is locked and the spin_lock protecting balloon + * pages list is held before inserting a page into the balloon device. + */ +static inline void balloon_page_insert(struct page *page, + struct address_space *mapping, + struct list_head *head) +{ + page->mapping = mapping; + list_add(&page->lru, head); +} + +/* + * balloon_page_delete - delete a page from balloon's page list and clear + * the page->mapping assignement accordingly. + * @page : page to be released from balloon's page list + * + * Caller must ensure the page is locked and the spin_lock protecting balloon + * pages list is held before deleting a page from the balloon device. + */ +static inline void balloon_page_delete(struct page *page) +{ + page->mapping = NULL; + list_del(&page->lru); +} + +/* + * balloon_page_device - get the b_dev_info descriptor for the balloon device + * that enqueues the given page. + */ +static inline struct balloon_dev_info *balloon_page_device(struct page *page) +{ + struct address_space *mapping = page->mapping; + if (likely(mapping)) + return mapping->private_data; + + return NULL; +} + +static inline gfp_t balloon_mapping_gfp_mask(void) +{ + return GFP_HIGHUSER_MOVABLE; +} + +static inline bool balloon_compaction_check(void) +{ + return true; +} + +#else /* !CONFIG_BALLOON_COMPACTION */ + +static inline void *balloon_mapping_alloc(void *balloon_device, + const struct address_space_operations *a_ops) +{ + return ERR_PTR(-EOPNOTSUPP); +} + +static inline void balloon_mapping_free(struct address_space *balloon_mapping) +{ + return; +} + +static inline void balloon_page_insert(struct page *page, + struct address_space *mapping, + struct list_head *head) +{ + list_add(&page->lru, head); +} + +static inline void balloon_page_delete(struct page *page) +{ + list_del(&page->lru); +} + +static inline bool balloon_page_movable(struct page *page) +{ + return false; +} + +static inline bool balloon_page_isolate(struct page *page) +{ + return false; +} + +static inline void balloon_page_putback(struct page *page) +{ + return; +} + +static inline int balloon_page_migrate(struct page *newpage, + struct page *page, enum migrate_mode mode) +{ + return 0; +} + +static inline gfp_t balloon_mapping_gfp_mask(void) +{ + return GFP_HIGHUSER; +} + +static inline bool balloon_compaction_check(void) +{ + return false; +} +#endif /* CONFIG_BALLOON_COMPACTION */ +#endif /* _LINUX_BALLOON_COMPACTION_H */ diff --git a/include/linux/bcm47xx_wdt.h b/include/linux/bcm47xx_wdt.h new file mode 100644 index 000000000000..e5dfc256485b --- /dev/null +++ b/include/linux/bcm47xx_wdt.h @@ -0,0 +1,19 @@ +#ifndef LINUX_BCM47XX_WDT_H_ +#define LINUX_BCM47XX_WDT_H_ + +#include <linux/types.h> + + +struct bcm47xx_wdt { + u32 (*timer_set)(struct bcm47xx_wdt *, u32); + u32 (*timer_set_ms)(struct bcm47xx_wdt *, u32); + u32 max_timer_ms; + + void *driver_data; +}; + +static inline void *bcm47xx_wdt_get_drvdata(struct bcm47xx_wdt *wdt) +{ + return wdt->driver_data; +} +#endif /* LINUX_BCM47XX_WDT_H_ */ diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index 4180eb78d575..e0ce311011c0 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -157,6 +157,7 @@ struct bcma_host_ops { /* Chip IDs of SoCs */ #define BCMA_CHIP_ID_BCM4706 0x5300 +#define BCMA_PKG_ID_BCM4706L 1 #define BCMA_CHIP_ID_BCM4716 0x4716 #define BCMA_PKG_ID_BCM4716 8 #define BCMA_PKG_ID_BCM4717 9 @@ -166,7 +167,11 @@ struct bcma_host_ops { #define BCMA_CHIP_ID_BCM4749 0x4749 #define BCMA_CHIP_ID_BCM5356 0x5356 #define BCMA_CHIP_ID_BCM5357 0x5357 +#define BCMA_PKG_ID_BCM5358 9 +#define BCMA_PKG_ID_BCM47186 10 +#define BCMA_PKG_ID_BCM5357 11 #define BCMA_CHIP_ID_BCM53572 53572 +#define BCMA_PKG_ID_BCM47188 9 struct bcma_device { struct bcma_bus *bus; @@ -251,7 +256,7 @@ struct bcma_bus { u8 num; struct bcma_drv_cc drv_cc; - struct bcma_drv_pci drv_pci; + struct bcma_drv_pci drv_pci[2]; struct bcma_drv_mips drv_mips; struct bcma_drv_gmac_cmn drv_gmac_cmn; @@ -345,6 +350,7 @@ extern void bcma_core_set_clockmode(struct bcma_device *core, enum bcma_clkmode clkmode); extern void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status, bool on); +extern u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset); #define BCMA_DMA_TRANSLATION_MASK 0xC0000000 #define BCMA_DMA_TRANSLATION_NONE 0x00000000 #define BCMA_DMA_TRANSLATION_DMA32_CMT 0x40000000 /* Client Mode Translation for 32-bit DMA */ diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index 1cf1749440ac..9a0e3fa3ca95 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -1,6 +1,9 @@ #ifndef LINUX_BCMA_DRIVER_CC_H_ #define LINUX_BCMA_DRIVER_CC_H_ +#include <linux/platform_device.h> +#include <linux/gpio.h> + /** ChipCommon core registers. **/ #define BCMA_CC_ID 0x0000 #define BCMA_CC_ID_ID 0x0000FFFF @@ -510,6 +513,7 @@ struct bcma_chipcommon_pmu { #ifdef CONFIG_BCMA_DRIVER_MIPS struct bcma_pflash { + bool present; u8 buswidth; u32 window; u32 window_size; @@ -532,6 +536,7 @@ struct mtd_info; struct bcma_nflash { bool present; + bool boot; /* This is the flash the SoC boots from */ struct mtd_info *mtd; }; @@ -552,6 +557,7 @@ struct bcma_drv_cc { u32 capabilities; u32 capabilities_ext; u8 setup_done:1; + u8 early_setup_done:1; /* Fast Powerup Delay constant */ u16 fast_pwrup_delay; struct bcma_chipcommon_pmu pmu; @@ -567,6 +573,14 @@ struct bcma_drv_cc { int nr_serial_ports; struct bcma_serial_port serial_ports[4]; #endif /* CONFIG_BCMA_DRIVER_MIPS */ + u32 ticks_per_ms; + struct platform_device *watchdog; + + /* Lock for GPIO register access. */ + spinlock_t gpio_lock; +#ifdef CONFIG_BCMA_DRIVER_GPIO + struct gpio_chip gpio; +#endif }; /* Register access */ @@ -583,14 +597,14 @@ struct bcma_drv_cc { bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set)) extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc); +extern void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc); extern void bcma_chipco_suspend(struct bcma_drv_cc *cc); extern void bcma_chipco_resume(struct bcma_drv_cc *cc); void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable); -extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, - u32 ticks); +extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks); void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value); @@ -603,9 +617,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value); u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value); u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value); u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value); +u32 bcma_chipco_gpio_pullup(struct bcma_drv_cc *cc, u32 mask, u32 value); +u32 bcma_chipco_gpio_pulldown(struct bcma_drv_cc *cc, u32 mask, u32 value); /* PMU support */ extern void bcma_pmu_init(struct bcma_drv_cc *cc); +extern void bcma_pmu_early_init(struct bcma_drv_cc *cc); extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value); diff --git a/include/linux/bcma/bcma_driver_mips.h b/include/linux/bcma/bcma_driver_mips.h index c0043645cdcb..0baf8a56b794 100644 --- a/include/linux/bcma/bcma_driver_mips.h +++ b/include/linux/bcma/bcma_driver_mips.h @@ -35,13 +35,16 @@ struct bcma_device; struct bcma_drv_mips { struct bcma_device *core; u8 setup_done:1; + u8 early_setup_done:1; unsigned int assigned_irqs; }; #ifdef CONFIG_BCMA_DRIVER_MIPS extern void bcma_core_mips_init(struct bcma_drv_mips *mcore); +extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore); #else static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } +static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { } #endif extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); diff --git a/include/linux/bcma/bcma_regs.h b/include/linux/bcma/bcma_regs.h index 6c9cb93ae3de..7e8104bb7a7e 100644 --- a/include/linux/bcma/bcma_regs.h +++ b/include/linux/bcma/bcma_regs.h @@ -85,6 +85,9 @@ * (2 ZettaBytes), high 32 bits */ -#define BCMA_SFLASH 0x1c000000 +#define BCMA_SOC_FLASH1 0x1fc00000 /* MIPS Flash Region 1 */ +#define BCMA_SOC_FLASH1_SZ 0x00400000 /* MIPS Size of Flash Region 1 */ +#define BCMA_SOC_FLASH2 0x1c000000 /* Flash Region 2 (region 1 shadowed here) */ +#define BCMA_SOC_FLASH2_SZ 0x02000000 /* Size of Flash Region 2 */ #endif /* LINUX_BCMA_REGS_H_ */ diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h index cfcc6bfcaec0..a4c2b565c835 100644 --- a/include/linux/binfmts.h +++ b/include/linux/binfmts.h @@ -54,8 +54,6 @@ struct linux_binprm { #define BINPRM_FLAGS_EXECFD_BIT 1 #define BINPRM_FLAGS_EXECFD (1 << BINPRM_FLAGS_EXECFD_BIT) -#define BINPRM_MAX_RECURSION 4 - /* Function parameter for binfmt->coredump */ struct coredump_params { siginfo_t *siginfo; @@ -72,7 +70,7 @@ struct coredump_params { struct linux_binfmt { struct list_head lh; struct module *module; - int (*load_binary)(struct linux_binprm *, struct pt_regs * regs); + int (*load_binary)(struct linux_binprm *); int (*load_shlib)(struct file *); int (*core_dump)(struct coredump_params *cprm); unsigned long min_coredump; /* minimal dump size */ @@ -95,7 +93,7 @@ extern void unregister_binfmt(struct linux_binfmt *); extern int prepare_binprm(struct linux_binprm *); extern int __must_check remove_arg_zero(struct linux_binprm *); -extern int search_binary_handler(struct linux_binprm *, struct pt_regs *); +extern int search_binary_handler(struct linux_binprm *); extern int flush_old_exec(struct linux_binprm * bprm); extern void setup_new_exec(struct linux_binprm * bprm); extern void would_dump(struct linux_binprm *, struct file *); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 1756001210d2..f94bc83011ed 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -378,6 +378,12 @@ struct request_queue { unsigned int nr_sorted; unsigned int in_flight[2]; + /* + * Number of active block driver functions for which blk_drain_queue() + * must wait. Must be incremented around functions that unlock the + * queue_lock internally, e.g. scsi_request_fn(). + */ + unsigned int request_fn_active; unsigned int rq_timeout; struct timer_list timeout; @@ -437,7 +443,7 @@ struct request_queue { #define QUEUE_FLAG_STOPPED 2 /* queue is stopped */ #define QUEUE_FLAG_SYNCFULL 3 /* read queue has been filled */ #define QUEUE_FLAG_ASYNCFULL 4 /* write queue has been filled */ -#define QUEUE_FLAG_DEAD 5 /* queue being torn down */ +#define QUEUE_FLAG_DYING 5 /* queue being torn down */ #define QUEUE_FLAG_BYPASS 6 /* act as dumb FIFO queue */ #define QUEUE_FLAG_BIDI 7 /* queue supports bidi requests */ #define QUEUE_FLAG_NOMERGES 8 /* disable merge attempts */ @@ -452,6 +458,7 @@ struct request_queue { #define QUEUE_FLAG_ADD_RANDOM 16 /* Contributes to random pool */ #define QUEUE_FLAG_SECDISCARD 17 /* supports SECDISCARD */ #define QUEUE_FLAG_SAME_FORCE 18 /* force complete on same CPU */ +#define QUEUE_FLAG_DEAD 19 /* queue tear-down finished */ #define QUEUE_FLAG_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \ (1 << QUEUE_FLAG_STACKABLE) | \ @@ -521,6 +528,7 @@ static inline void queue_flag_clear(unsigned int flag, struct request_queue *q) #define blk_queue_tagged(q) test_bit(QUEUE_FLAG_QUEUED, &(q)->queue_flags) #define blk_queue_stopped(q) test_bit(QUEUE_FLAG_STOPPED, &(q)->queue_flags) +#define blk_queue_dying(q) test_bit(QUEUE_FLAG_DYING, &(q)->queue_flags) #define blk_queue_dead(q) test_bit(QUEUE_FLAG_DEAD, &(q)->queue_flags) #define blk_queue_bypass(q) test_bit(QUEUE_FLAG_BYPASS, &(q)->queue_flags) #define blk_queue_nomerges(q) test_bit(QUEUE_FLAG_NOMERGES, &(q)->queue_flags) @@ -1180,13 +1188,25 @@ static inline int queue_discard_alignment(struct request_queue *q) static inline int queue_limit_discard_alignment(struct queue_limits *lim, sector_t sector) { - unsigned int alignment = (sector << 9) & (lim->discard_granularity - 1); + unsigned int alignment, granularity, offset; if (!lim->max_discard_sectors) return 0; - return (lim->discard_granularity + lim->discard_alignment - alignment) - & (lim->discard_granularity - 1); + /* Why are these in bytes, not sectors? */ + alignment = lim->discard_alignment >> 9; + granularity = lim->discard_granularity >> 9; + if (!granularity) + return 0; + + /* Offset of the partition start in 'granularity' sectors */ + offset = sector_div(sector, granularity); + + /* And why do we do this modulus *again* in blkdev_issue_discard()? */ + offset = (granularity + alignment - offset) % granularity; + + /* Turn it back into bytes, gaah */ + return offset << 9; } static inline int bdev_discard_alignment(struct block_device *bdev) diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h index 6d6795d46a75..3f778c27f825 100644 --- a/include/linux/bootmem.h +++ b/include/linux/bootmem.h @@ -51,8 +51,8 @@ extern unsigned long free_all_bootmem(void); extern void free_bootmem_node(pg_data_t *pgdat, unsigned long addr, unsigned long size); -extern void free_bootmem(unsigned long addr, unsigned long size); -extern void free_bootmem_late(unsigned long addr, unsigned long size); +extern void free_bootmem(unsigned long physaddr, unsigned long size); +extern void free_bootmem_late(unsigned long physaddr, unsigned long size); /* * Flags for reserve_bootmem (also if CONFIG_HAVE_ARCH_BOOTMEM_NODE, @@ -137,9 +137,6 @@ extern void *__alloc_bootmem_low_node(pg_data_t *pgdat, #define alloc_bootmem_low_pages_node(pgdat, x) \ __alloc_bootmem_low_node(pgdat, x, PAGE_SIZE, 0) -extern int reserve_bootmem_generic(unsigned long addr, unsigned long size, - int flags); - #ifdef CONFIG_HAVE_ARCH_ALLOC_REMAP extern void *alloc_remap(int nid, unsigned long size); #else diff --git a/include/linux/bsg-lib.h b/include/linux/bsg-lib.h index 4d0fb3df2f4a..a226652a5a6c 100644 --- a/include/linux/bsg-lib.h +++ b/include/linux/bsg-lib.h @@ -67,6 +67,5 @@ void bsg_job_done(struct bsg_job *job, int result, int bsg_setup_queue(struct device *dev, struct request_queue *q, char *name, bsg_job_fn *job_fn, int dd_job_size); void bsg_request_fn(struct request_queue *q); -void bsg_goose_queue(struct request_queue *q); #endif diff --git a/include/linux/bug.h b/include/linux/bug.h index aaac4bba6f5c..b1cf40de847e 100644 --- a/include/linux/bug.h +++ b/include/linux/bug.h @@ -15,6 +15,7 @@ struct pt_regs; #define BUILD_BUG_ON_NOT_POWER_OF_2(n) #define BUILD_BUG_ON_ZERO(e) (0) #define BUILD_BUG_ON_NULL(e) ((void*)0) +#define BUILD_BUG_ON_INVALID(e) (0) #define BUILD_BUG_ON(condition) #define BUILD_BUG() (0) #else /* __CHECKER__ */ diff --git a/include/linux/byteorder/Kbuild b/include/linux/byteorder/Kbuild deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/include/linux/byteorder/Kbuild +++ /dev/null diff --git a/include/linux/caif/Kbuild b/include/linux/caif/Kbuild deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/include/linux/caif/Kbuild +++ /dev/null diff --git a/include/linux/can/Kbuild b/include/linux/can/Kbuild deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/include/linux/can/Kbuild +++ /dev/null diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index f8a030ced0c7..7d73905dcba2 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -12,6 +12,7 @@ #include <linux/cpumask.h> #include <linux/nodemask.h> #include <linux/rcupdate.h> +#include <linux/rculist.h> #include <linux/cgroupstats.h> #include <linux/prio_heap.h> #include <linux/rwsem.h> @@ -34,7 +35,6 @@ extern int cgroup_lock_is_held(void); extern bool cgroup_lock_live_group(struct cgroup *cgrp); extern void cgroup_unlock(void); extern void cgroup_fork(struct task_struct *p); -extern void cgroup_fork_callbacks(struct task_struct *p); extern void cgroup_post_fork(struct task_struct *p); extern void cgroup_exit(struct task_struct *p, int run_callbacks); extern int cgroupstats_build(struct cgroupstats *stats, @@ -66,7 +66,7 @@ struct cgroup_subsys_state { /* * State maintained by the cgroup system to allow subsystems * to be "busy". Should be accessed via css_get(), - * css_tryget() and and css_put(). + * css_tryget() and css_put(). */ atomic_t refcnt; @@ -81,9 +81,8 @@ struct cgroup_subsys_state { /* bits in struct cgroup_subsys_state flags field */ enum { - CSS_ROOT, /* This CSS is the root of the subsystem */ - CSS_REMOVED, /* This CSS is dead */ - CSS_CLEAR_CSS_REFS, /* @ss->__DEPRECATED_clear_css_refs */ + CSS_ROOT = (1 << 0), /* this CSS is the root of the subsystem */ + CSS_ONLINE = (1 << 1), /* between ->css_online() and ->css_offline() */ }; /* Caller must verify that the css is not for root cgroup */ @@ -102,15 +101,10 @@ static inline void __css_get(struct cgroup_subsys_state *css, int count) static inline void css_get(struct cgroup_subsys_state *css) { /* We don't need to reference count the root state */ - if (!test_bit(CSS_ROOT, &css->flags)) + if (!(css->flags & CSS_ROOT)) __css_get(css, 1); } -static inline bool css_is_removed(struct cgroup_subsys_state *css) -{ - return test_bit(CSS_REMOVED, &css->flags); -} - /* * Call css_tryget() to take a reference on a css if your existing * (known-valid) reference isn't already ref-counted. Returns false if @@ -120,7 +114,7 @@ static inline bool css_is_removed(struct cgroup_subsys_state *css) extern bool __css_tryget(struct cgroup_subsys_state *css); static inline bool css_tryget(struct cgroup_subsys_state *css) { - if (test_bit(CSS_ROOT, &css->flags)) + if (css->flags & CSS_ROOT) return true; return __css_tryget(css); } @@ -133,7 +127,7 @@ static inline bool css_tryget(struct cgroup_subsys_state *css) extern void __css_put(struct cgroup_subsys_state *css); static inline void css_put(struct cgroup_subsys_state *css) { - if (!test_bit(CSS_ROOT, &css->flags)) + if (!(css->flags & CSS_ROOT)) __css_put(css); } @@ -149,13 +143,11 @@ enum { /* Control Group requires release notifications to userspace */ CGRP_NOTIFY_ON_RELEASE, /* - * A thread in rmdir() is wating for this cgroup. - */ - CGRP_WAIT_ON_RMDIR, - /* - * Clone cgroup values when creating a new child cgroup + * Clone the parent's configuration when creating a new child + * cpuset cgroup. For historical reasons, this option can be + * specified at mount time and thus is implemented here. */ - CGRP_CLONE_CHILDREN, + CGRP_CPUSET_CLONE_CHILDREN, }; struct cgroup { @@ -167,6 +159,8 @@ struct cgroup { */ atomic_t count; + int id; /* ida allocated in-hierarchy ID */ + /* * We link our 'sibling' struct into our parent's 'children'. * Our children link their 'sibling' into our 'children'. @@ -176,7 +170,7 @@ struct cgroup { struct list_head files; /* my files */ struct cgroup *parent; /* my parent */ - struct dentry __rcu *dentry; /* cgroup fs entry, RCU protected */ + struct dentry *dentry; /* cgroup fs entry, RCU protected */ /* Private pointers for each registered subsystem */ struct cgroup_subsys_state *subsys[CGROUP_SUBSYS_COUNT]; @@ -282,7 +276,7 @@ struct cgroup_map_cb { /* cftype->flags */ #define CFTYPE_ONLY_ON_ROOT (1U << 0) /* only create on root cg */ -#define CFTYPE_NOT_ON_ROOT (1U << 1) /* don't create onp root cg */ +#define CFTYPE_NOT_ON_ROOT (1U << 1) /* don't create on root cg */ #define MAX_CFTYPE_NAME 64 @@ -422,23 +416,6 @@ int cgroup_task_count(const struct cgroup *cgrp); int cgroup_is_descendant(const struct cgroup *cgrp, struct task_struct *task); /* - * When the subsys has to access css and may add permanent refcnt to css, - * it should take care of racy conditions with rmdir(). Following set of - * functions, is for stop/restart rmdir if necessary. - * Because these will call css_get/put, "css" should be alive css. - * - * cgroup_exclude_rmdir(); - * ...do some jobs which may access arbitrary empty cgroup - * cgroup_release_and_wakeup_rmdir(); - * - * When someone removes a cgroup while cgroup_exclude_rmdir() holds it, - * it sleeps and cgroup_release_and_wakeup_rmdir() will wake him up. - */ - -void cgroup_exclude_rmdir(struct cgroup_subsys_state *css); -void cgroup_release_and_wakeup_rmdir(struct cgroup_subsys_state *css); - -/* * Control Group taskset, used to pass around set of tasks to cgroup_subsys * methods. */ @@ -466,16 +443,17 @@ int cgroup_taskset_size(struct cgroup_taskset *tset); */ struct cgroup_subsys { - struct cgroup_subsys_state *(*create)(struct cgroup *cgrp); - int (*pre_destroy)(struct cgroup *cgrp); - void (*destroy)(struct cgroup *cgrp); + struct cgroup_subsys_state *(*css_alloc)(struct cgroup *cgrp); + int (*css_online)(struct cgroup *cgrp); + void (*css_offline)(struct cgroup *cgrp); + void (*css_free)(struct cgroup *cgrp); + int (*can_attach)(struct cgroup *cgrp, struct cgroup_taskset *tset); void (*cancel_attach)(struct cgroup *cgrp, struct cgroup_taskset *tset); void (*attach)(struct cgroup *cgrp, struct cgroup_taskset *tset); void (*fork)(struct task_struct *task); void (*exit)(struct cgroup *cgrp, struct cgroup *old_cgrp, struct task_struct *task); - void (*post_clone)(struct cgroup *cgrp); void (*bind)(struct cgroup *root); int subsys_id; @@ -489,17 +467,6 @@ struct cgroup_subsys { bool use_id; /* - * If %true, cgroup removal will try to clear css refs by retrying - * ss->pre_destroy() until there's no css ref left. This behavior - * is strictly for backward compatibility and will be removed as - * soon as the current user (memcg) is updated. - * - * If %false, ss->pre_destroy() can't fail and cgroup removal won't - * wait for css refs to drop to zero before proceeding. - */ - bool __DEPRECATED_clear_css_refs; - - /* * If %false, this subsystem is properly hierarchical - * configuration, resource accounting and restriction on a parent * cgroup cover those of its children. If %true, hierarchy support @@ -572,6 +539,100 @@ static inline struct cgroup* task_cgroup(struct task_struct *task, return task_subsys_state(task, subsys_id)->cgroup; } +/** + * cgroup_for_each_child - iterate through children of a cgroup + * @pos: the cgroup * to use as the loop cursor + * @cgroup: cgroup whose children to walk + * + * Walk @cgroup's children. Must be called under rcu_read_lock(). A child + * cgroup which hasn't finished ->css_online() or already has finished + * ->css_offline() may show up during traversal and it's each subsystem's + * responsibility to verify that each @pos is alive. + * + * If a subsystem synchronizes against the parent in its ->css_online() and + * before starting iterating, a cgroup which finished ->css_online() is + * guaranteed to be visible in the future iterations. + */ +#define cgroup_for_each_child(pos, cgroup) \ + list_for_each_entry_rcu(pos, &(cgroup)->children, sibling) + +struct cgroup *cgroup_next_descendant_pre(struct cgroup *pos, + struct cgroup *cgroup); + +/** + * cgroup_for_each_descendant_pre - pre-order walk of a cgroup's descendants + * @pos: the cgroup * to use as the loop cursor + * @cgroup: cgroup whose descendants to walk + * + * Walk @cgroup's descendants. Must be called under rcu_read_lock(). A + * descendant cgroup which hasn't finished ->css_online() or already has + * finished ->css_offline() may show up during traversal and it's each + * subsystem's responsibility to verify that each @pos is alive. + * + * If a subsystem synchronizes against the parent in its ->css_online() and + * before starting iterating, and synchronizes against @pos on each + * iteration, any descendant cgroup which finished ->css_offline() is + * guaranteed to be visible in the future iterations. + * + * In other words, the following guarantees that a descendant can't escape + * state updates of its ancestors. + * + * my_online(@cgrp) + * { + * Lock @cgrp->parent and @cgrp; + * Inherit state from @cgrp->parent; + * Unlock both. + * } + * + * my_update_state(@cgrp) + * { + * Lock @cgrp; + * Update @cgrp's state; + * Unlock @cgrp; + * + * cgroup_for_each_descendant_pre(@pos, @cgrp) { + * Lock @pos; + * Verify @pos is alive and inherit state from @pos->parent; + * Unlock @pos; + * } + * } + * + * As long as the inheriting step, including checking the parent state, is + * enclosed inside @pos locking, double-locking the parent isn't necessary + * while inheriting. The state update to the parent is guaranteed to be + * visible by walking order and, as long as inheriting operations to the + * same @pos are atomic to each other, multiple updates racing each other + * still result in the correct state. It's guaranateed that at least one + * inheritance happens for any cgroup after the latest update to its + * parent. + * + * If checking parent's state requires locking the parent, each inheriting + * iteration should lock and unlock both @pos->parent and @pos. + * + * Alternatively, a subsystem may choose to use a single global lock to + * synchronize ->css_online() and ->css_offline() against tree-walking + * operations. + */ +#define cgroup_for_each_descendant_pre(pos, cgroup) \ + for (pos = cgroup_next_descendant_pre(NULL, (cgroup)); (pos); \ + pos = cgroup_next_descendant_pre((pos), (cgroup))) + +struct cgroup *cgroup_next_descendant_post(struct cgroup *pos, + struct cgroup *cgroup); + +/** + * cgroup_for_each_descendant_post - post-order walk of a cgroup's descendants + * @pos: the cgroup * to use as the loop cursor + * @cgroup: cgroup whose descendants to walk + * + * Similar to cgroup_for_each_descendant_pre() but performs post-order + * traversal instead. Note that the walk visibility guarantee described in + * pre-order walk doesn't apply the same to post-order walks. + */ +#define cgroup_for_each_descendant_post(pos, cgroup) \ + for (pos = cgroup_next_descendant_post(NULL, (cgroup)); (pos); \ + pos = cgroup_next_descendant_post((pos), (cgroup))) + /* A cgroup_iter should be treated as an opaque object */ struct cgroup_iter { struct list_head *cg_link; diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index c12731582920..4989b8a7bed1 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -53,9 +53,18 @@ struct clk_hw; * @disable: Disable the clock atomically. Called with enable_lock held. * This function must not sleep. * - * @recalc_rate Recalculate the rate of this clock, by quering hardware. The + * @is_enabled: Queries the hardware to determine if the clock is enabled. + * This function must not sleep. Optional, if this op is not + * set then the enable count will be used. + * + * @disable_unused: Disable the clock atomically. Only called from + * clk_disable_unused for gate clocks with special needs. + * Called with enable_lock held. This function must not + * sleep. + * + * @recalc_rate Recalculate the rate of this clock, by querying hardware. The * parent rate is an input parameter. It is up to the caller to - * insure that the prepare_mutex is held across this call. + * ensure that the prepare_mutex is held across this call. * Returns the calculated rate. Optional, but recommended - if * this op is not set then clock rate will be initialized to 0. * @@ -89,7 +98,7 @@ struct clk_hw; * implementations to split any work between atomic (enable) and sleepable * (prepare) contexts. If enabling a clock requires code that might sleep, * this must be done in clk_prepare. Clock enable code that will never be - * called in a sleepable context may be implement in clk_enable. + * called in a sleepable context may be implemented in clk_enable. * * Typically, drivers will call clk_prepare when a clock may be needed later * (eg. when a device is opened), and clk_enable when the clock is actually @@ -102,6 +111,7 @@ struct clk_ops { int (*enable)(struct clk_hw *hw); void (*disable)(struct clk_hw *hw); int (*is_enabled)(struct clk_hw *hw); + void (*disable_unused)(struct clk_hw *hw); unsigned long (*recalc_rate)(struct clk_hw *hw, unsigned long parent_rate); long (*round_rate)(struct clk_hw *hw, unsigned long, @@ -327,19 +337,21 @@ struct clk *clk_register_fixed_factor(struct device *dev, const char *name, * error code; drivers must test for an error code after calling clk_register. */ struct clk *clk_register(struct device *dev, struct clk_hw *hw); +struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw); void clk_unregister(struct clk *clk); +void devm_clk_unregister(struct device *dev, struct clk *clk); /* helper functions */ const char *__clk_get_name(struct clk *clk); struct clk_hw *__clk_get_hw(struct clk *clk); u8 __clk_get_num_parents(struct clk *clk); struct clk *__clk_get_parent(struct clk *clk); -inline int __clk_get_enable_count(struct clk *clk); -inline int __clk_get_prepare_count(struct clk *clk); +unsigned int __clk_get_enable_count(struct clk *clk); +unsigned int __clk_get_prepare_count(struct clk *clk); unsigned long __clk_get_rate(struct clk *clk); unsigned long __clk_get_flags(struct clk *clk); -int __clk_is_enabled(struct clk *clk); +bool __clk_is_enabled(struct clk *clk); struct clk *__clk_lookup(const char *name); /* diff --git a/include/linux/clk/mvebu.h b/include/linux/clk/mvebu.h new file mode 100644 index 000000000000..8c4ae713b063 --- /dev/null +++ b/include/linux/clk/mvebu.h @@ -0,0 +1,22 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __CLK_MVEBU_H_ +#define __CLK_MVEBU_H_ + +void __init mvebu_clocks_init(void); + +#endif diff --git a/include/linux/clk/sunxi.h b/include/linux/clk/sunxi.h new file mode 100644 index 000000000000..e074fdd5a236 --- /dev/null +++ b/include/linux/clk/sunxi.h @@ -0,0 +1,22 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_CLK_SUNXI_H_ +#define __LINUX_CLK_SUNXI_H_ + +void __init sunxi_init_clocks(void); + +#endif diff --git a/include/linux/usb/g_printer.h b/include/linux/clk/zynq.h index 6178fde50f74..56be7cd9aa8b 100644 --- a/include/linux/usb/g_printer.h +++ b/include/linux/clk/zynq.h @@ -1,7 +1,5 @@ /* - * g_printer.h -- Header file for USB Printer gadget driver - * - * Copyright (C) 2007 Craig W. Nadler + * Copyright (C) 2012 National Instruments * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -18,18 +16,9 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef __LINUX_USB_G_PRINTER_H -#define __LINUX_USB_G_PRINTER_H - -#define PRINTER_NOT_ERROR 0x08 -#define PRINTER_SELECTED 0x10 -#define PRINTER_PAPER_EMPTY 0x20 +#ifndef __LINUX_CLK_ZYNQ_H_ +#define __LINUX_CLK_ZYNQ_H_ -/* The 'g' code is also used by gadgetfs ioctl requests. - * Don't add any colliding codes to either driver, and keep - * them in unique ranges (size 0x20 for now). - */ -#define GADGET_GET_PRINTER_STATUS _IOR('g', 0x21, unsigned char) -#define GADGET_SET_PRINTER_STATUS _IOWR('g', 0x22, unsigned char) +void __init xilinx_zynq_clocks_init(void __iomem *slcr); -#endif /* __LINUX_USB_G_PRINTER_H */ +#endif diff --git a/include/linux/compat.h b/include/linux/compat.h index d0ced1011f2f..e4920bd58a47 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -284,12 +284,8 @@ asmlinkage ssize_t compat_sys_pwritev(unsigned long fd, const struct compat_iovec __user *vec, unsigned long vlen, u32 pos_low, u32 pos_high); -int compat_do_execve(const char *filename, const compat_uptr_t __user *argv, - const compat_uptr_t __user *envp, struct pt_regs *regs); -#ifdef __ARCH_WANT_SYS_EXECVE asmlinkage long compat_sys_execve(const char __user *filename, const compat_uptr_t __user *argv, const compat_uptr_t __user *envp); -#endif asmlinkage long compat_sys_select(int n, compat_ulong_t __user *inp, compat_ulong_t __user *outp, compat_ulong_t __user *exp, @@ -592,6 +588,9 @@ asmlinkage ssize_t compat_sys_process_vm_writev(compat_pid_t pid, asmlinkage long compat_sys_sendfile(int out_fd, int in_fd, compat_off_t __user *offset, compat_size_t count); +asmlinkage long compat_sys_sched_rr_get_interval(compat_pid_t pid, + struct compat_timespec __user *interval); + #else #define is_compat_task() (0) diff --git a/include/linux/compiler-gcc4.h b/include/linux/compiler-gcc4.h index 412bc6c2b023..662fd1b4c42a 100644 --- a/include/linux/compiler-gcc4.h +++ b/include/linux/compiler-gcc4.h @@ -31,6 +31,8 @@ #define __linktime_error(message) __attribute__((__error__(message))) +#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__) + #if __GNUC_MINOR__ >= 5 /* * Mark a position in code as unreachable. This can be used to @@ -63,3 +65,13 @@ #define __compiletime_warning(message) __attribute__((warning(message))) #define __compiletime_error(message) __attribute__((error(message))) #endif + +#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP +#if __GNUC_MINOR__ >= 4 +#define __HAVE_BUILTIN_BSWAP32__ +#define __HAVE_BUILTIN_BSWAP64__ +#endif +#if __GNUC_MINOR__ >= 8 || (defined(__powerpc__) && __GNUC_MINOR__ >= 6) +#define __HAVE_BUILTIN_BSWAP16__ +#endif +#endif diff --git a/include/linux/compiler-intel.h b/include/linux/compiler-intel.h index d8e636e5607d..973ce10c40b6 100644 --- a/include/linux/compiler-intel.h +++ b/include/linux/compiler-intel.h @@ -29,3 +29,10 @@ #endif #define uninitialized_var(x) x + +#ifndef __HAVE_BUILTIN_BSWAP16__ +/* icc has this, but it's called _bswap16 */ +#define __HAVE_BUILTIN_BSWAP16__ +#define __builtin_bswap16 _bswap16 +#endif + diff --git a/include/linux/compiler.h b/include/linux/compiler.h index f430e4162f41..dd852b73b286 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -10,6 +10,7 @@ # define __force __attribute__((force)) # define __nocast __attribute__((nocast)) # define __iomem __attribute__((noderef, address_space(2))) +# define __must_hold(x) __attribute__((context(x,1,1))) # define __acquires(x) __attribute__((context(x,0,1))) # define __releases(x) __attribute__((context(x,1,0))) # define __acquire(x) __context__(x,1) @@ -33,6 +34,7 @@ extern void __chk_io_ptr(const volatile void __iomem *); # define __chk_user_ptr(x) (void)0 # define __chk_io_ptr(x) (void)0 # define __builtin_warning(x, y...) (1) +# define __must_hold(x) # define __acquires(x) # define __releases(x) # define __acquire(x) (void)0 @@ -42,6 +44,10 @@ extern void __chk_io_ptr(const volatile void __iomem *); # define __rcu #endif +/* Indirect macros required for expanded argument pasting, eg. __LINE__. */ +#define ___PASTE(a,b) a##b +#define __PASTE(a,b) ___PASTE(a,b) + #ifdef __KERNEL__ #ifdef __GNUC__ @@ -164,6 +170,11 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect); (typeof(ptr)) (__ptr + (off)); }) #endif +/* Not-quite-unique ID. */ +#ifndef __UNIQUE_ID +# define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __LINE__) +#endif + #endif /* __KERNEL__ */ #endif /* __ASSEMBLY__ */ diff --git a/include/linux/context_tracking.h b/include/linux/context_tracking.h new file mode 100644 index 000000000000..e24339ccb7f0 --- /dev/null +++ b/include/linux/context_tracking.h @@ -0,0 +1,18 @@ +#ifndef _LINUX_CONTEXT_TRACKING_H +#define _LINUX_CONTEXT_TRACKING_H + +#ifdef CONFIG_CONTEXT_TRACKING +#include <linux/sched.h> + +extern void user_enter(void); +extern void user_exit(void); +extern void context_tracking_task_switch(struct task_struct *prev, + struct task_struct *next); +#else +static inline void user_enter(void) { } +static inline void user_exit(void) { } +static inline void context_tracking_task_switch(struct task_struct *prev, + struct task_struct *next) { } +#endif /* !CONFIG_CONTEXT_TRACKING */ + +#endif diff --git a/include/linux/coredump.h b/include/linux/coredump.h index 1775eb8acc03..a98f1ca60407 100644 --- a/include/linux/coredump.h +++ b/include/linux/coredump.h @@ -4,6 +4,7 @@ #include <linux/types.h> #include <linux/mm.h> #include <linux/fs.h> +#include <asm/siginfo.h> /* * These are the only things you should do on a core-file: use only these @@ -12,9 +13,9 @@ extern int dump_write(struct file *file, const void *addr, int nr); extern int dump_seek(struct file *file, loff_t off); #ifdef CONFIG_COREDUMP -extern void do_coredump(siginfo_t *siginfo, struct pt_regs *regs); +extern void do_coredump(siginfo_t *siginfo); #else -static inline void do_coredump(siginfo_t *siginfo, struct pt_regs *regs) {} +static inline void do_coredump(siginfo_t *siginfo) {} #endif #endif /* _LINUX_COREDUMP_H */ diff --git a/include/linux/cpu_cooling.h b/include/linux/cpu_cooling.h index 851530128e65..40b4ef54cc7d 100644 --- a/include/linux/cpu_cooling.h +++ b/include/linux/cpu_cooling.h @@ -29,13 +29,13 @@ #define CPUFREQ_COOLING_START 0 #define CPUFREQ_COOLING_STOP 1 -#ifdef CONFIG_CPU_THERMAL +#if defined(CONFIG_CPU_THERMAL) || defined(CONFIG_CPU_THERMAL_MODULE) /** * cpufreq_cooling_register - function to create cpufreq cooling device. * @clip_cpus: cpumask of cpus where the frequency constraints will happen */ struct thermal_cooling_device *cpufreq_cooling_register( - struct cpumask *clip_cpus); + const struct cpumask *clip_cpus); /** * cpufreq_cooling_unregister - function to remove cpufreq cooling device. @@ -44,7 +44,7 @@ struct thermal_cooling_device *cpufreq_cooling_register( void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev); #else /* !CONFIG_CPU_THERMAL */ static inline struct thermal_cooling_device *cpufreq_cooling_register( - struct cpumask *clip_cpus) + const struct cpumask *clip_cpus) { return NULL; } diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index b60f6ba01d0c..a55b88eaf96a 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -11,6 +11,7 @@ #ifndef _LINUX_CPUFREQ_H #define _LINUX_CPUFREQ_H +#include <asm/cputime.h> #include <linux/mutex.h> #include <linux/notifier.h> #include <linux/threads.h> @@ -22,6 +23,8 @@ #include <asm/div64.h> #define CPUFREQ_NAME_LEN 16 +/* Print length for names. Extra 1 space for accomodating '\n' in prints */ +#define CPUFREQ_NAME_PLEN (CPUFREQ_NAME_LEN + 1) /********************************************************************* @@ -404,6 +407,4 @@ void cpufreq_frequency_table_get_attr(struct cpufreq_frequency_table *table, unsigned int cpu); void cpufreq_frequency_table_put_attr(unsigned int cpu); - - #endif /* _LINUX_CPUFREQ_H */ diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 279b1eaa8b73..3711b34dc4f9 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -82,13 +82,6 @@ cpuidle_set_statedata(struct cpuidle_state_usage *st_usage, void *data) st_usage->driver_data = data; } -struct cpuidle_state_kobj { - struct cpuidle_state *state; - struct cpuidle_state_usage *state_usage; - struct completion kobj_unregister; - struct kobject kobj; -}; - struct cpuidle_device { unsigned int registered:1; unsigned int enabled:1; @@ -98,7 +91,7 @@ struct cpuidle_device { int state_count; struct cpuidle_state_usage states_usage[CPUIDLE_STATE_MAX]; struct cpuidle_state_kobj *kobjs[CPUIDLE_STATE_MAX]; - + struct cpuidle_driver_kobj *kobj_driver; struct list_head device_list; struct kobject kobj; struct completion kobj_unregister; @@ -131,6 +124,7 @@ static inline int cpuidle_get_last_residency(struct cpuidle_device *dev) struct cpuidle_driver { const char *name; struct module *owner; + int refcnt; unsigned int power_specified:1; /* set to 1 to use the core cpuidle time keeping (for all states). */ @@ -163,6 +157,10 @@ extern int cpuidle_wrap_enter(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index)); extern int cpuidle_play_dead(void); +extern struct cpuidle_driver *cpuidle_get_cpu_driver(struct cpuidle_device *dev); +extern int cpuidle_register_cpu_driver(struct cpuidle_driver *drv, int cpu); +extern void cpuidle_unregister_cpu_driver(struct cpuidle_driver *drv, int cpu); + #else static inline void disable_cpuidle(void) { } static inline int cpuidle_idle_call(void) { return -ENODEV; } @@ -189,7 +187,6 @@ static inline int cpuidle_wrap_enter(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index)) { return -ENODEV; } static inline int cpuidle_play_dead(void) {return -ENODEV; } - #endif #ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h index 838320fc3d1d..8c8a60d29407 100644 --- a/include/linux/cpuset.h +++ b/include/linux/cpuset.h @@ -144,7 +144,7 @@ static inline nodemask_t cpuset_mems_allowed(struct task_struct *p) return node_possible_map; } -#define cpuset_current_mems_allowed (node_states[N_HIGH_MEMORY]) +#define cpuset_current_mems_allowed (node_states[N_MEMORY]) static inline void cpuset_init_current_mems_allowed(void) {} static inline int cpuset_nodemask_valid_mems_allowed(nodemask_t *nodemask) diff --git a/include/linux/cred.h b/include/linux/cred.h index ebbed2ce6637..abb2cd50f6b2 100644 --- a/include/linux/cred.h +++ b/include/linux/cred.h @@ -77,21 +77,6 @@ extern int in_group_p(kgid_t); extern int in_egroup_p(kgid_t); /* - * The common credentials for a thread group - * - shared by CLONE_THREAD - */ -#ifdef CONFIG_KEYS -struct thread_group_cred { - atomic_t usage; - pid_t tgid; /* thread group process ID */ - spinlock_t lock; - struct key __rcu *session_keyring; /* keyring inherited over fork */ - struct key *process_keyring; /* keyring private to this process */ - struct rcu_head rcu; /* RCU deletion hook */ -}; -#endif - -/* * The security context of a task * * The parts of the context break down into two categories: @@ -139,6 +124,8 @@ struct cred { #ifdef CONFIG_KEYS unsigned char jit_keyring; /* default keyring to attach requested * keys to */ + struct key __rcu *session_keyring; /* keyring inherited over fork */ + struct key *process_keyring; /* keyring private to this process */ struct key *thread_keyring; /* keyring private to this thread */ struct key *request_key_auth; /* assumed request_key authority */ struct thread_group_cred *tgcred; /* thread-group shared credentials */ @@ -357,10 +344,8 @@ static inline void put_cred(const struct cred *_cred) extern struct user_namespace init_user_ns; #ifdef CONFIG_USER_NS #define current_user_ns() (current_cred_xxx(user_ns)) -#define task_user_ns(task) (task_cred_xxx((task), user_ns)) #else #define current_user_ns() (&init_user_ns) -#define task_user_ns(task) (&init_user_ns) #endif diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h index 281c72a3b9d5..e83ef39b3bea 100644 --- a/include/linux/devfreq.h +++ b/include/linux/devfreq.h @@ -25,12 +25,12 @@ struct devfreq; * struct devfreq_dev_status - Data given from devfreq user device to * governors. Represents the performance * statistics. - * @total_time The total time represented by this instance of + * @total_time: The total time represented by this instance of * devfreq_dev_status - * @busy_time The time that the device was working among the + * @busy_time: The time that the device was working among the * total_time. - * @current_frequency The operating frequency. - * @private_data An entry not specified by the devfreq framework. + * @current_frequency: The operating frequency. + * @private_data: An entry not specified by the devfreq framework. * A device and a specific governor may have their * own protocol with private_data. However, because * this is governor-specific, a governor using this @@ -54,23 +54,27 @@ struct devfreq_dev_status { /** * struct devfreq_dev_profile - Devfreq's user device profile - * @initial_freq The operating frequency when devfreq_add_device() is + * @initial_freq: The operating frequency when devfreq_add_device() is * called. - * @polling_ms The polling interval in ms. 0 disables polling. - * @target The device should set its operating frequency at + * @polling_ms: The polling interval in ms. 0 disables polling. + * @target: The device should set its operating frequency at * freq or lowest-upper-than-freq value. If freq is * higher than any operable frequency, set maximum. * Before returning, target function should set * freq at the current frequency. * The "flags" parameter's possible values are * explained above with "DEVFREQ_FLAG_*" macros. - * @get_dev_status The device should provide the current performance + * @get_dev_status: The device should provide the current performance * status to devfreq, which is used by governors. - * @exit An optional callback that is called when devfreq + * @get_cur_freq: The device should provide the current frequency + * at which it is operating. + * @exit: An optional callback that is called when devfreq * is removing the devfreq object due to error or * from devfreq_remove_device() call. If the user * has registered devfreq->nb at a notifier-head, * this is the time to unregister it. + * @freq_table: Optional list of frequencies to support statistics. + * @max_state: The size of freq_table. */ struct devfreq_dev_profile { unsigned long initial_freq; @@ -79,63 +83,63 @@ struct devfreq_dev_profile { int (*target)(struct device *dev, unsigned long *freq, u32 flags); int (*get_dev_status)(struct device *dev, struct devfreq_dev_status *stat); + int (*get_cur_freq)(struct device *dev, unsigned long *freq); void (*exit)(struct device *dev); + + unsigned int *freq_table; + unsigned int max_state; }; /** * struct devfreq_governor - Devfreq policy governor - * @name Governor's name - * @get_target_freq Returns desired operating frequency for the device. + * @node: list node - contains registered devfreq governors + * @name: Governor's name + * @get_target_freq: Returns desired operating frequency for the device. * Basically, get_target_freq will run * devfreq_dev_profile.get_dev_status() to get the * status of the device (load = busy_time / total_time). * If no_central_polling is set, this callback is called * only with update_devfreq() notified by OPP. - * @init Called when the devfreq is being attached to a device - * @exit Called when the devfreq is being removed from a - * device. Governor should stop any internal routines - * before return because related data may be - * freed after exit(). - * @no_central_polling Do not use devfreq's central polling mechanism. - * When this is set, devfreq will not call - * get_target_freq with devfreq_monitor(). However, - * devfreq will call get_target_freq with - * devfreq_update() notified by OPP framework. + * @event_handler: Callback for devfreq core framework to notify events + * to governors. Events include per device governor + * init and exit, opp changes out of devfreq, suspend + * and resume of per device devfreq during device idle. * * Note that the callbacks are called with devfreq->lock locked by devfreq. */ struct devfreq_governor { + struct list_head node; + const char name[DEVFREQ_NAME_LEN]; int (*get_target_freq)(struct devfreq *this, unsigned long *freq); - int (*init)(struct devfreq *this); - void (*exit)(struct devfreq *this); - const bool no_central_polling; + int (*event_handler)(struct devfreq *devfreq, + unsigned int event, void *data); }; /** * struct devfreq - Device devfreq structure - * @node list node - contains the devices with devfreq that have been + * @node: list node - contains the devices with devfreq that have been * registered. - * @lock a mutex to protect accessing devfreq. - * @dev device registered by devfreq class. dev.parent is the device + * @lock: a mutex to protect accessing devfreq. + * @dev: device registered by devfreq class. dev.parent is the device * using devfreq. - * @profile device-specific devfreq profile - * @governor method how to choose frequency based on the usage. - * @nb notifier block used to notify devfreq object that it should + * @profile: device-specific devfreq profile + * @governor: method how to choose frequency based on the usage. + * @governor_name: devfreq governor name for use with this devfreq + * @nb: notifier block used to notify devfreq object that it should * reevaluate operable frequencies. Devfreq users may use * devfreq.nb to the corresponding register notifier call chain. - * @polling_jiffies interval in jiffies. - * @previous_freq previously configured frequency value. - * @next_polling the number of remaining jiffies to poll with - * "devfreq_monitor" executions to reevaluate - * frequency/voltage of the device. Set by - * profile's polling_ms interval. - * @data Private data of the governor. The devfreq framework does not + * @work: delayed work for load monitoring. + * @previous_freq: previously configured frequency value. + * @data: Private data of the governor. The devfreq framework does not * touch this. - * @being_removed a flag to mark that this object is being removed in - * order to prevent trying to remove the object multiple times. - * @min_freq Limit minimum frequency requested by user (0: none) - * @max_freq Limit maximum frequency requested by user (0: none) + * @min_freq: Limit minimum frequency requested by user (0: none) + * @max_freq: Limit maximum frequency requested by user (0: none) + * @stop_polling: devfreq polling status of a device. + * @total_trans: Number of devfreq transitions + * @trans_table: Statistics of devfreq transitions + * @time_in_state: Statistics of devfreq states + * @last_stat_updated: The last time stat updated * * This structure stores the devfreq information for a give device. * @@ -152,26 +156,33 @@ struct devfreq { struct device dev; struct devfreq_dev_profile *profile; const struct devfreq_governor *governor; + char governor_name[DEVFREQ_NAME_LEN]; struct notifier_block nb; + struct delayed_work work; - unsigned long polling_jiffies; unsigned long previous_freq; - unsigned int next_polling; void *data; /* private data for governors */ - bool being_removed; - unsigned long min_freq; unsigned long max_freq; + bool stop_polling; + + /* information for device freqeuncy transition */ + unsigned int total_trans; + unsigned int *trans_table; + unsigned long *time_in_state; + unsigned long last_stat_updated; }; #if defined(CONFIG_PM_DEVFREQ) extern struct devfreq *devfreq_add_device(struct device *dev, struct devfreq_dev_profile *profile, - const struct devfreq_governor *governor, + const char *governor_name, void *data); extern int devfreq_remove_device(struct devfreq *devfreq); +extern int devfreq_suspend_device(struct devfreq *devfreq); +extern int devfreq_resume_device(struct devfreq *devfreq); /* Helper functions for devfreq user device driver with OPP. */ extern struct opp *devfreq_recommended_opp(struct device *dev, @@ -181,23 +192,13 @@ extern int devfreq_register_opp_notifier(struct device *dev, extern int devfreq_unregister_opp_notifier(struct device *dev, struct devfreq *devfreq); -#ifdef CONFIG_DEVFREQ_GOV_POWERSAVE -extern const struct devfreq_governor devfreq_powersave; -#endif -#ifdef CONFIG_DEVFREQ_GOV_PERFORMANCE -extern const struct devfreq_governor devfreq_performance; -#endif -#ifdef CONFIG_DEVFREQ_GOV_USERSPACE -extern const struct devfreq_governor devfreq_userspace; -#endif -#ifdef CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND -extern const struct devfreq_governor devfreq_simple_ondemand; +#if IS_ENABLED(CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND) /** * struct devfreq_simple_ondemand_data - void *data fed to struct devfreq * and devfreq_add_device - * @ upthreshold If the load is over this value, the frequency jumps. + * @upthreshold: If the load is over this value, the frequency jumps. * Specify 0 to use the default. Valid value = 0 to 100. - * @ downdifferential If the load is under upthreshold - downdifferential, + * @downdifferential: If the load is under upthreshold - downdifferential, * the governor may consider slowing the frequency down. * Specify 0 to use the default. Valid value = 0 to 100. * downdifferential < upthreshold must hold. @@ -214,7 +215,7 @@ struct devfreq_simple_ondemand_data { #else /* !CONFIG_PM_DEVFREQ */ static struct devfreq *devfreq_add_device(struct device *dev, struct devfreq_dev_profile *profile, - struct devfreq_governor *governor, + const char *governor_name, void *data) { return NULL; @@ -225,6 +226,16 @@ static int devfreq_remove_device(struct devfreq *devfreq) return 0; } +static int devfreq_suspend_device(struct devfreq *devfreq) +{ + return 0; +} + +static int devfreq_resume_device(struct devfreq *devfreq) +{ + return 0; +} + static struct opp *devfreq_recommended_opp(struct device *dev, unsigned long *freq, u32 flags) { @@ -243,11 +254,6 @@ static int devfreq_unregister_opp_notifier(struct device *dev, return -EINVAL; } -#define devfreq_powersave NULL -#define devfreq_performance NULL -#define devfreq_userspace NULL -#define devfreq_simple_ondemand NULL - #endif /* CONFIG_PM_DEVFREQ */ #endif /* __LINUX_DEVFREQ_H__ */ diff --git a/include/linux/device.h b/include/linux/device.h index 86ef6ab553b1..43dcda937ddf 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -190,6 +190,7 @@ extern struct klist *bus_get_device_klist(struct bus_type *bus); * @mod_name: Used for built-in modules. * @suppress_bind_attrs: Disables bind/unbind via sysfs. * @of_match_table: The open firmware table. + * @acpi_match_table: The ACPI match table. * @probe: Called to query the existence of a specific device, * whether this driver can work with it, and bind the driver * to a specific device. @@ -223,6 +224,7 @@ struct device_driver { bool suppress_bind_attrs; /* disables bind/unbind via sysfs */ const struct of_device_id *of_match_table; + const struct acpi_device_id *acpi_match_table; int (*probe) (struct device *dev); int (*remove) (struct device *dev); @@ -496,6 +498,10 @@ ssize_t device_show_int(struct device *dev, struct device_attribute *attr, char *buf); ssize_t device_store_int(struct device *dev, struct device_attribute *attr, const char *buf, size_t count); +ssize_t device_show_bool(struct device *dev, struct device_attribute *attr, + char *buf); +ssize_t device_store_bool(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count); #define DEVICE_ATTR(_name, _mode, _show, _store) \ struct device_attribute dev_attr_##_name = __ATTR(_name, _mode, _show, _store) @@ -505,6 +511,9 @@ ssize_t device_store_int(struct device *dev, struct device_attribute *attr, #define DEVICE_INT_ATTR(_name, _mode, _var) \ struct dev_ext_attribute dev_attr_##_name = \ { __ATTR(_name, _mode, device_show_int, device_store_int), &(_var) } +#define DEVICE_BOOL_ATTR(_name, _mode, _var) \ + struct dev_ext_attribute dev_attr_##_name = \ + { __ATTR(_name, _mode, device_show_bool, device_store_bool), &(_var) } #define DEVICE_ATTR_IGNORE_LOCKDEP(_name, _mode, _show, _store) \ struct device_attribute dev_attr_##_name = \ __ATTR_IGNORE_LOCKDEP(_name, _mode, _show, _store) @@ -576,6 +585,12 @@ struct device_dma_parameters { unsigned long segment_boundary_mask; }; +struct acpi_dev_node { +#ifdef CONFIG_ACPI + void *handle; +#endif +}; + /** * struct device - The basic device structure * @parent: The device's "parent" device, the device to which it is attached. @@ -616,6 +631,7 @@ struct device_dma_parameters { * @dma_mem: Internal for coherent mem override. * @archdata: For arch-specific additions. * @of_node: Associated device tree node. + * @acpi_node: Associated ACPI device node. * @devt: For creating the sysfs "dev". * @id: device instance * @devres_lock: Spinlock to protect the resource of the device. @@ -680,6 +696,7 @@ struct device { struct dev_archdata archdata; struct device_node *of_node; /* associated device tree node */ + struct acpi_dev_node acpi_node; /* associated ACPI device node */ dev_t devt; /* dev_t, creates the sysfs "dev" */ u32 id; /* device instance */ @@ -700,6 +717,14 @@ static inline struct device *kobj_to_dev(struct kobject *kobj) return container_of(kobj, struct device, kobj); } +#ifdef CONFIG_ACPI +#define ACPI_HANDLE(dev) ((dev)->acpi_node.handle) +#define ACPI_HANDLE_SET(dev, _handle_) (dev)->acpi_node.handle = (_handle_) +#else +#define ACPI_HANDLE(dev) (NULL) +#define ACPI_HANDLE_SET(dev, _handle_) do { } while (0) +#endif + /* Get the wakeup routines, which depend on struct device */ #include <linux/pm_wakeup.h> diff --git a/include/linux/devpts_fs.h b/include/linux/devpts_fs.h index 5ce0e5fd712e..251a2090a554 100644 --- a/include/linux/devpts_fs.h +++ b/include/linux/devpts_fs.h @@ -20,28 +20,28 @@ int devpts_new_index(struct inode *ptmx_inode); void devpts_kill_index(struct inode *ptmx_inode, int idx); /* mknod in devpts */ -int devpts_pty_new(struct inode *ptmx_inode, struct tty_struct *tty); -/* get tty structure */ -struct tty_struct *devpts_get_tty(struct inode *pts_inode, int number); +struct inode *devpts_pty_new(struct inode *ptmx_inode, dev_t device, int index, + void *priv); +/* get private structure */ +void *devpts_get_priv(struct inode *pts_inode); /* unlink */ -void devpts_pty_kill(struct tty_struct *tty); +void devpts_pty_kill(struct inode *inode); #else /* Dummy stubs in the no-pty case */ static inline int devpts_new_index(struct inode *ptmx_inode) { return -EINVAL; } static inline void devpts_kill_index(struct inode *ptmx_inode, int idx) { } -static inline int devpts_pty_new(struct inode *ptmx_inode, - struct tty_struct *tty) +static inline struct inode *devpts_pty_new(struct inode *ptmx_inode, + dev_t device, int index, void *priv) { - return -EINVAL; + return ERR_PTR(-EINVAL); } -static inline struct tty_struct *devpts_get_tty(struct inode *pts_inode, - int number) +static inline void *devpts_get_priv(struct inode *pts_inode) { return NULL; } -static inline void devpts_pty_kill(struct tty_struct *tty) { } +static inline void devpts_pty_kill(struct inode *inode) { } #endif diff --git a/include/linux/dlm.h b/include/linux/dlm.h index 1d47dcce11e1..d02da2c6fc1a 100644 --- a/include/linux/dlm.h +++ b/include/linux/dlm.h @@ -98,7 +98,7 @@ int dlm_release_lockspace(dlm_lockspace_t *lockspace, int force); /* * dlm_lock * - * Make an asyncronous request to acquire or convert a lock on a named + * Make an asynchronous request to acquire or convert a lock on a named * resource. * * lockspace: context for the request diff --git a/include/linux/dma-attrs.h b/include/linux/dma-attrs.h index f83f793223ff..c8e1831d7572 100644 --- a/include/linux/dma-attrs.h +++ b/include/linux/dma-attrs.h @@ -17,6 +17,7 @@ enum dma_attr { DMA_ATTR_NON_CONSISTENT, DMA_ATTR_NO_KERNEL_MAPPING, DMA_ATTR_SKIP_CPU_SYNC, + DMA_ATTR_FORCE_CONTIGUOUS, DMA_ATTR_MAX, }; diff --git a/include/linux/dma-buf.h b/include/linux/dma-buf.h index eb48f3816df9..bd2e52ccc4f2 100644 --- a/include/linux/dma-buf.h +++ b/include/linux/dma-buf.h @@ -156,7 +156,6 @@ static inline void get_dma_buf(struct dma_buf *dmabuf) get_file(dmabuf->file); } -#ifdef CONFIG_DMA_SHARED_BUFFER struct dma_buf_attachment *dma_buf_attach(struct dma_buf *dmabuf, struct device *dev); void dma_buf_detach(struct dma_buf *dmabuf, @@ -184,103 +183,5 @@ int dma_buf_mmap(struct dma_buf *, struct vm_area_struct *, unsigned long); void *dma_buf_vmap(struct dma_buf *); void dma_buf_vunmap(struct dma_buf *, void *vaddr); -#else - -static inline struct dma_buf_attachment *dma_buf_attach(struct dma_buf *dmabuf, - struct device *dev) -{ - return ERR_PTR(-ENODEV); -} - -static inline void dma_buf_detach(struct dma_buf *dmabuf, - struct dma_buf_attachment *dmabuf_attach) -{ - return; -} - -static inline struct dma_buf *dma_buf_export(void *priv, - const struct dma_buf_ops *ops, - size_t size, int flags) -{ - return ERR_PTR(-ENODEV); -} - -static inline int dma_buf_fd(struct dma_buf *dmabuf, int flags) -{ - return -ENODEV; -} - -static inline struct dma_buf *dma_buf_get(int fd) -{ - return ERR_PTR(-ENODEV); -} - -static inline void dma_buf_put(struct dma_buf *dmabuf) -{ - return; -} - -static inline struct sg_table *dma_buf_map_attachment( - struct dma_buf_attachment *attach, enum dma_data_direction write) -{ - return ERR_PTR(-ENODEV); -} - -static inline void dma_buf_unmap_attachment(struct dma_buf_attachment *attach, - struct sg_table *sg, enum dma_data_direction dir) -{ - return; -} - -static inline int dma_buf_begin_cpu_access(struct dma_buf *dmabuf, - size_t start, size_t len, - enum dma_data_direction dir) -{ - return -ENODEV; -} - -static inline void dma_buf_end_cpu_access(struct dma_buf *dmabuf, - size_t start, size_t len, - enum dma_data_direction dir) -{ -} - -static inline void *dma_buf_kmap_atomic(struct dma_buf *dmabuf, - unsigned long pnum) -{ - return NULL; -} - -static inline void dma_buf_kunmap_atomic(struct dma_buf *dmabuf, - unsigned long pnum, void *vaddr) -{ -} - -static inline void *dma_buf_kmap(struct dma_buf *dmabuf, unsigned long pnum) -{ - return NULL; -} - -static inline void dma_buf_kunmap(struct dma_buf *dmabuf, - unsigned long pnum, void *vaddr) -{ -} - -static inline int dma_buf_mmap(struct dma_buf *dmabuf, - struct vm_area_struct *vma, - unsigned long pgoff) -{ - return -ENODEV; -} - -static inline void *dma_buf_vmap(struct dma_buf *dmabuf) -{ - return NULL; -} - -static inline void dma_buf_vunmap(struct dma_buf *dmabuf, void *vaddr) -{ -} -#endif /* CONFIG_DMA_SHARED_BUFFER */ #endif /* __DMA_BUF_H__ */ diff --git a/include/linux/dma-contiguous.h b/include/linux/dma-contiguous.h index 2f303e4b7ed3..01b5c84be828 100644 --- a/include/linux/dma-contiguous.h +++ b/include/linux/dma-contiguous.h @@ -68,7 +68,7 @@ struct device; extern struct cma *dma_contiguous_default_area; void dma_contiguous_reserve(phys_addr_t addr_limit); -int dma_declare_contiguous(struct device *dev, unsigned long size, +int dma_declare_contiguous(struct device *dev, phys_addr_t size, phys_addr_t base, phys_addr_t limit); struct page *dma_alloc_from_contiguous(struct device *dev, int count, @@ -83,7 +83,7 @@ bool dma_release_from_contiguous(struct device *dev, struct page *pages, static inline void dma_contiguous_reserve(phys_addr_t limit) { } static inline -int dma_declare_contiguous(struct device *dev, unsigned long size, +int dma_declare_contiguous(struct device *dev, phys_addr_t size, phys_addr_t base, phys_addr_t limit) { return -ENOSYS; diff --git a/include/linux/dma/ipu-dma.h b/include/linux/dma/ipu-dma.h new file mode 100644 index 000000000000..18031115c668 --- /dev/null +++ b/include/linux/dma/ipu-dma.h @@ -0,0 +1,177 @@ +/* + * Copyright (C) 2008 + * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> + * + * Copyright (C) 2005-2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_DMA_IPU_DMA_H +#define __LINUX_DMA_IPU_DMA_H + +#include <linux/types.h> +#include <linux/dmaengine.h> + +/* IPU DMA Controller channel definitions. */ +enum ipu_channel { + IDMAC_IC_0 = 0, /* IC (encoding task) to memory */ + IDMAC_IC_1 = 1, /* IC (viewfinder task) to memory */ + IDMAC_ADC_0 = 1, + IDMAC_IC_2 = 2, + IDMAC_ADC_1 = 2, + IDMAC_IC_3 = 3, + IDMAC_IC_4 = 4, + IDMAC_IC_5 = 5, + IDMAC_IC_6 = 6, + IDMAC_IC_7 = 7, /* IC (sensor data) to memory */ + IDMAC_IC_8 = 8, + IDMAC_IC_9 = 9, + IDMAC_IC_10 = 10, + IDMAC_IC_11 = 11, + IDMAC_IC_12 = 12, + IDMAC_IC_13 = 13, + IDMAC_SDC_0 = 14, /* Background synchronous display data */ + IDMAC_SDC_1 = 15, /* Foreground data (overlay) */ + IDMAC_SDC_2 = 16, + IDMAC_SDC_3 = 17, + IDMAC_ADC_2 = 18, + IDMAC_ADC_3 = 19, + IDMAC_ADC_4 = 20, + IDMAC_ADC_5 = 21, + IDMAC_ADC_6 = 22, + IDMAC_ADC_7 = 23, + IDMAC_PF_0 = 24, + IDMAC_PF_1 = 25, + IDMAC_PF_2 = 26, + IDMAC_PF_3 = 27, + IDMAC_PF_4 = 28, + IDMAC_PF_5 = 29, + IDMAC_PF_6 = 30, + IDMAC_PF_7 = 31, +}; + +/* Order significant! */ +enum ipu_channel_status { + IPU_CHANNEL_FREE, + IPU_CHANNEL_INITIALIZED, + IPU_CHANNEL_READY, + IPU_CHANNEL_ENABLED, +}; + +#define IPU_CHANNELS_NUM 32 + +enum pixel_fmt { + /* 1 byte */ + IPU_PIX_FMT_GENERIC, + IPU_PIX_FMT_RGB332, + IPU_PIX_FMT_YUV420P, + IPU_PIX_FMT_YUV422P, + IPU_PIX_FMT_YUV420P2, + IPU_PIX_FMT_YVU422P, + /* 2 bytes */ + IPU_PIX_FMT_RGB565, + IPU_PIX_FMT_RGB666, + IPU_PIX_FMT_BGR666, + IPU_PIX_FMT_YUYV, + IPU_PIX_FMT_UYVY, + /* 3 bytes */ + IPU_PIX_FMT_RGB24, + IPU_PIX_FMT_BGR24, + /* 4 bytes */ + IPU_PIX_FMT_GENERIC_32, + IPU_PIX_FMT_RGB32, + IPU_PIX_FMT_BGR32, + IPU_PIX_FMT_ABGR32, + IPU_PIX_FMT_BGRA32, + IPU_PIX_FMT_RGBA32, +}; + +enum ipu_color_space { + IPU_COLORSPACE_RGB, + IPU_COLORSPACE_YCBCR, + IPU_COLORSPACE_YUV +}; + +/* + * Enumeration of IPU rotation modes + */ +enum ipu_rotate_mode { + /* Note the enum values correspond to BAM value */ + IPU_ROTATE_NONE = 0, + IPU_ROTATE_VERT_FLIP = 1, + IPU_ROTATE_HORIZ_FLIP = 2, + IPU_ROTATE_180 = 3, + IPU_ROTATE_90_RIGHT = 4, + IPU_ROTATE_90_RIGHT_VFLIP = 5, + IPU_ROTATE_90_RIGHT_HFLIP = 6, + IPU_ROTATE_90_LEFT = 7, +}; + +/* + * Enumeration of DI ports for ADC. + */ +enum display_port { + DISP0, + DISP1, + DISP2, + DISP3 +}; + +struct idmac_video_param { + unsigned short in_width; + unsigned short in_height; + uint32_t in_pixel_fmt; + unsigned short out_width; + unsigned short out_height; + uint32_t out_pixel_fmt; + unsigned short out_stride; + bool graphics_combine_en; + bool global_alpha_en; + bool key_color_en; + enum display_port disp; + unsigned short out_left; + unsigned short out_top; +}; + +/* + * Union of initialization parameters for a logical channel. So far only video + * parameters are used. + */ +union ipu_channel_param { + struct idmac_video_param video; +}; + +struct idmac_tx_desc { + struct dma_async_tx_descriptor txd; + struct scatterlist *sg; /* scatterlist for this */ + unsigned int sg_len; /* tx-descriptor. */ + struct list_head list; +}; + +struct idmac_channel { + struct dma_chan dma_chan; + dma_cookie_t completed; /* last completed cookie */ + union ipu_channel_param params; + enum ipu_channel link; /* input channel, linked to the output */ + enum ipu_channel_status status; + void *client; /* Only one client per channel */ + unsigned int n_tx_desc; + struct idmac_tx_desc *desc; /* allocated tx-descriptors */ + struct scatterlist *sg[2]; /* scatterlist elements in buffer-0 and -1 */ + struct list_head free_list; /* free tx-descriptors */ + struct list_head queue; /* queued tx-descriptors */ + spinlock_t lock; /* protects sg[0,1], queue */ + struct mutex chan_mutex; /* protects status, cookie, free_list */ + bool sec_chan_en; + int active_buffer; + unsigned int eof_irq; + char eof_name[16]; /* EOF IRQ name for request_irq() */ +}; + +#define to_tx_desc(tx) container_of(tx, struct idmac_tx_desc, txd) +#define to_idmac_chan(c) container_of(c, struct idmac_channel, dma_chan) + +#endif /* __LINUX_DMA_IPU_DMA_H */ diff --git a/include/linux/drbd.h b/include/linux/drbd.h index 47e3d4850584..0c5a18ec322c 100644 --- a/include/linux/drbd.h +++ b/include/linux/drbd.h @@ -51,12 +51,11 @@ #endif - extern const char *drbd_buildtag(void); -#define REL_VERSION "8.3.13" -#define API_VERSION 88 +#define REL_VERSION "8.4.2" +#define API_VERSION 1 #define PRO_VERSION_MIN 86 -#define PRO_VERSION_MAX 96 +#define PRO_VERSION_MAX 101 enum drbd_io_error_p { @@ -66,7 +65,8 @@ enum drbd_io_error_p { }; enum drbd_fencing_p { - FP_DONT_CARE, + FP_NOT_AVAIL = -1, /* Not a policy */ + FP_DONT_CARE = 0, FP_RESOURCE, FP_STONITH }; @@ -102,6 +102,20 @@ enum drbd_on_congestion { OC_DISCONNECT, }; +enum drbd_read_balancing { + RB_PREFER_LOCAL, + RB_PREFER_REMOTE, + RB_ROUND_ROBIN, + RB_LEAST_PENDING, + RB_CONGESTED_REMOTE, + RB_32K_STRIPING, + RB_64K_STRIPING, + RB_128K_STRIPING, + RB_256K_STRIPING, + RB_512K_STRIPING, + RB_1M_STRIPING, +}; + /* KEEP the order, do not delete or insert. Only append. */ enum drbd_ret_code { ERR_CODE_BASE = 100, @@ -122,7 +136,7 @@ enum drbd_ret_code { ERR_AUTH_ALG = 120, ERR_AUTH_ALG_ND = 121, ERR_NOMEM = 122, - ERR_DISCARD = 123, + ERR_DISCARD_IMPOSSIBLE = 123, ERR_DISK_CONFIGURED = 124, ERR_NET_CONFIGURED = 125, ERR_MANDATORY_TAG = 126, @@ -130,8 +144,8 @@ enum drbd_ret_code { ERR_INTR = 129, /* EINTR */ ERR_RESIZE_RESYNC = 130, ERR_NO_PRIMARY = 131, - ERR_SYNC_AFTER = 132, - ERR_SYNC_AFTER_CYCLE = 133, + ERR_RESYNC_AFTER = 132, + ERR_RESYNC_AFTER_CYCLE = 133, ERR_PAUSE_IS_SET = 134, ERR_PAUSE_IS_CLEAR = 135, ERR_PACKET_NR = 137, @@ -155,6 +169,14 @@ enum drbd_ret_code { ERR_CONG_NOT_PROTO_A = 155, ERR_PIC_AFTER_DEP = 156, ERR_PIC_PEER_DEP = 157, + ERR_RES_NOT_KNOWN = 158, + ERR_RES_IN_USE = 159, + ERR_MINOR_CONFIGURED = 160, + ERR_MINOR_EXISTS = 161, + ERR_INVALID_REQUEST = 162, + ERR_NEED_APV_100 = 163, + ERR_NEED_ALLOW_TWO_PRI = 164, + ERR_MD_UNCLEAN = 165, /* insert new ones above this line */ AFTER_LAST_ERR_CODE @@ -296,7 +318,8 @@ enum drbd_state_rv { SS_NOT_SUPPORTED = -17, /* drbd-8.2 only */ SS_IN_TRANSIENT_STATE = -18, /* Retry after the next state change */ SS_CONCURRENT_ST_CHG = -19, /* Concurrent cluster side state change! */ - SS_AFTER_LAST_ERROR = -20, /* Keep this at bottom */ + SS_O_VOL_PEER_PRI = -20, + SS_AFTER_LAST_ERROR = -21, /* Keep this at bottom */ }; /* from drbd_strings.c */ @@ -313,7 +336,9 @@ extern const char *drbd_set_st_err_str(enum drbd_state_rv); #define MDF_FULL_SYNC (1 << 3) #define MDF_WAS_UP_TO_DATE (1 << 4) #define MDF_PEER_OUT_DATED (1 << 5) -#define MDF_CRASHED_PRIMARY (1 << 6) +#define MDF_CRASHED_PRIMARY (1 << 6) +#define MDF_AL_CLEAN (1 << 7) +#define MDF_AL_DISABLED (1 << 8) enum drbd_uuid_index { UI_CURRENT, @@ -333,37 +358,23 @@ enum drbd_timeout_flag { #define UUID_JUST_CREATED ((__u64)4) +/* magic numbers used in meta data and network packets */ #define DRBD_MAGIC 0x83740267 -#define BE_DRBD_MAGIC __constant_cpu_to_be32(DRBD_MAGIC) #define DRBD_MAGIC_BIG 0x835a -#define BE_DRBD_MAGIC_BIG __constant_cpu_to_be16(DRBD_MAGIC_BIG) +#define DRBD_MAGIC_100 0x8620ec20 + +#define DRBD_MD_MAGIC_07 (DRBD_MAGIC+3) +#define DRBD_MD_MAGIC_08 (DRBD_MAGIC+4) +#define DRBD_MD_MAGIC_84_UNCLEAN (DRBD_MAGIC+5) + + +/* how I came up with this magic? + * base64 decode "actlog==" ;) */ +#define DRBD_AL_MAGIC 0x69cb65a2 /* these are of type "int" */ #define DRBD_MD_INDEX_INTERNAL -1 #define DRBD_MD_INDEX_FLEX_EXT -2 #define DRBD_MD_INDEX_FLEX_INT -3 -/* Start of the new netlink/connector stuff */ - -#define DRBD_NL_CREATE_DEVICE 0x01 -#define DRBD_NL_SET_DEFAULTS 0x02 - - -/* For searching a vacant cn_idx value */ -#define CN_IDX_STEP 6977 - -struct drbd_nl_cfg_req { - int packet_type; - unsigned int drbd_minor; - int flags; - unsigned short tag_list[]; -}; - -struct drbd_nl_cfg_reply { - int packet_type; - unsigned int minor; - int ret_code; /* enum ret_code or set_st_err_t */ - unsigned short tag_list[]; /* only used with get_* calls */ -}; - #endif diff --git a/include/linux/drbd_genl.h b/include/linux/drbd_genl.h new file mode 100644 index 000000000000..d0d8fac8a6e4 --- /dev/null +++ b/include/linux/drbd_genl.h @@ -0,0 +1,378 @@ +/* + * General overview: + * full generic netlink message: + * |nlmsghdr|genlmsghdr|<payload> + * + * payload: + * |optional fixed size family header|<sequence of netlink attributes> + * + * sequence of netlink attributes: + * I chose to have all "top level" attributes NLA_NESTED, + * corresponding to some real struct. + * So we have a sequence of |tla, len|<nested nla sequence> + * + * nested nla sequence: + * may be empty, or contain a sequence of netlink attributes + * representing the struct fields. + * + * The tag number of any field (regardless of containing struct) + * will be available as T_ ## field_name, + * so you cannot have the same field name in two differnt structs. + * + * The tag numbers themselves are per struct, though, + * so should always begin at 1 (not 0, that is the special "NLA_UNSPEC" type, + * which we won't use here). + * The tag numbers are used as index in the respective nla_policy array. + * + * GENL_struct(tag_name, tag_number, struct name, struct fields) - struct and policy + * genl_magic_struct.h + * generates the struct declaration, + * generates an entry in the tla enum, + * genl_magic_func.h + * generates an entry in the static tla policy + * with .type = NLA_NESTED + * generates the static <struct_name>_nl_policy definition, + * and static conversion functions + * + * genl_magic_func.h + * + * GENL_mc_group(group) + * genl_magic_struct.h + * does nothing + * genl_magic_func.h + * defines and registers the mcast group, + * and provides a send helper + * + * GENL_notification(op_name, op_num, mcast_group, tla list) + * These are notifications to userspace. + * + * genl_magic_struct.h + * generates an entry in the genl_ops enum, + * genl_magic_func.h + * does nothing + * + * mcast group: the name of the mcast group this notification should be + * expected on + * tla list: the list of expected top level attributes, + * for documentation and sanity checking. + * + * GENL_op(op_name, op_num, flags and handler, tla list) - "genl operations" + * These are requests from userspace. + * + * _op and _notification share the same "number space", + * op_nr will be assigned to "genlmsghdr->cmd" + * + * genl_magic_struct.h + * generates an entry in the genl_ops enum, + * genl_magic_func.h + * generates an entry in the static genl_ops array, + * and static register/unregister functions to + * genl_register_family_with_ops(). + * + * flags and handler: + * GENL_op_init( .doit = x, .dumpit = y, .flags = something) + * GENL_doit(x) => .dumpit = NULL, .flags = GENL_ADMIN_PERM + * tla list: the list of expected top level attributes, + * for documentation and sanity checking. + */ + +/* + * STRUCTS + */ + +/* this is sent kernel -> userland on various error conditions, and contains + * informational textual info, which is supposedly human readable. + * The computer relevant return code is in the drbd_genlmsghdr. + */ +GENL_struct(DRBD_NLA_CFG_REPLY, 1, drbd_cfg_reply, + /* "arbitrary" size strings, nla_policy.len = 0 */ + __str_field(1, DRBD_GENLA_F_MANDATORY, info_text, 0) +) + +/* Configuration requests typically need a context to operate on. + * Possible keys are device minor (fits in the drbd_genlmsghdr), + * the replication link (aka connection) name, + * and/or the replication group (aka resource) name, + * and the volume id within the resource. */ +GENL_struct(DRBD_NLA_CFG_CONTEXT, 2, drbd_cfg_context, + __u32_field(1, DRBD_GENLA_F_MANDATORY, ctx_volume) + __str_field(2, DRBD_GENLA_F_MANDATORY, ctx_resource_name, 128) + __bin_field(3, DRBD_GENLA_F_MANDATORY, ctx_my_addr, 128) + __bin_field(4, DRBD_GENLA_F_MANDATORY, ctx_peer_addr, 128) +) + +GENL_struct(DRBD_NLA_DISK_CONF, 3, disk_conf, + __str_field(1, DRBD_F_REQUIRED | DRBD_F_INVARIANT, backing_dev, 128) + __str_field(2, DRBD_F_REQUIRED | DRBD_F_INVARIANT, meta_dev, 128) + __s32_field(3, DRBD_F_REQUIRED | DRBD_F_INVARIANT, meta_dev_idx) + + /* use the resize command to try and change the disk_size */ + __u64_field(4, DRBD_GENLA_F_MANDATORY | DRBD_F_INVARIANT, disk_size) + /* we could change the max_bio_bvecs, + * but it won't propagate through the stack */ + __u32_field(5, DRBD_GENLA_F_MANDATORY | DRBD_F_INVARIANT, max_bio_bvecs) + + __u32_field_def(6, DRBD_GENLA_F_MANDATORY, on_io_error, DRBD_ON_IO_ERROR_DEF) + __u32_field_def(7, DRBD_GENLA_F_MANDATORY, fencing, DRBD_FENCING_DEF) + + __u32_field_def(8, DRBD_GENLA_F_MANDATORY, resync_rate, DRBD_RESYNC_RATE_DEF) + __s32_field_def(9, DRBD_GENLA_F_MANDATORY, resync_after, DRBD_MINOR_NUMBER_DEF) + __u32_field_def(10, DRBD_GENLA_F_MANDATORY, al_extents, DRBD_AL_EXTENTS_DEF) + __u32_field_def(11, DRBD_GENLA_F_MANDATORY, c_plan_ahead, DRBD_C_PLAN_AHEAD_DEF) + __u32_field_def(12, DRBD_GENLA_F_MANDATORY, c_delay_target, DRBD_C_DELAY_TARGET_DEF) + __u32_field_def(13, DRBD_GENLA_F_MANDATORY, c_fill_target, DRBD_C_FILL_TARGET_DEF) + __u32_field_def(14, DRBD_GENLA_F_MANDATORY, c_max_rate, DRBD_C_MAX_RATE_DEF) + __u32_field_def(15, DRBD_GENLA_F_MANDATORY, c_min_rate, DRBD_C_MIN_RATE_DEF) + + __flg_field_def(16, DRBD_GENLA_F_MANDATORY, disk_barrier, DRBD_DISK_BARRIER_DEF) + __flg_field_def(17, DRBD_GENLA_F_MANDATORY, disk_flushes, DRBD_DISK_FLUSHES_DEF) + __flg_field_def(18, DRBD_GENLA_F_MANDATORY, disk_drain, DRBD_DISK_DRAIN_DEF) + __flg_field_def(19, DRBD_GENLA_F_MANDATORY, md_flushes, DRBD_MD_FLUSHES_DEF) + __u32_field_def(20, DRBD_GENLA_F_MANDATORY, disk_timeout, DRBD_DISK_TIMEOUT_DEF) + __u32_field_def(21, 0 /* OPTIONAL */, read_balancing, DRBD_READ_BALANCING_DEF) + /* 9: __u32_field_def(22, DRBD_GENLA_F_MANDATORY, unplug_watermark, DRBD_UNPLUG_WATERMARK_DEF) */ + __flg_field_def(23, 0 /* OPTIONAL */, al_updates, DRBD_AL_UPDATES_DEF) +) + +GENL_struct(DRBD_NLA_RESOURCE_OPTS, 4, res_opts, + __str_field_def(1, DRBD_GENLA_F_MANDATORY, cpu_mask, 32) + __u32_field_def(2, DRBD_GENLA_F_MANDATORY, on_no_data, DRBD_ON_NO_DATA_DEF) +) + +GENL_struct(DRBD_NLA_NET_CONF, 5, net_conf, + __str_field_def(1, DRBD_GENLA_F_MANDATORY | DRBD_F_SENSITIVE, + shared_secret, SHARED_SECRET_MAX) + __str_field_def(2, DRBD_GENLA_F_MANDATORY, cram_hmac_alg, SHARED_SECRET_MAX) + __str_field_def(3, DRBD_GENLA_F_MANDATORY, integrity_alg, SHARED_SECRET_MAX) + __str_field_def(4, DRBD_GENLA_F_MANDATORY, verify_alg, SHARED_SECRET_MAX) + __str_field_def(5, DRBD_GENLA_F_MANDATORY, csums_alg, SHARED_SECRET_MAX) + __u32_field_def(6, DRBD_GENLA_F_MANDATORY, wire_protocol, DRBD_PROTOCOL_DEF) + __u32_field_def(7, DRBD_GENLA_F_MANDATORY, connect_int, DRBD_CONNECT_INT_DEF) + __u32_field_def(8, DRBD_GENLA_F_MANDATORY, timeout, DRBD_TIMEOUT_DEF) + __u32_field_def(9, DRBD_GENLA_F_MANDATORY, ping_int, DRBD_PING_INT_DEF) + __u32_field_def(10, DRBD_GENLA_F_MANDATORY, ping_timeo, DRBD_PING_TIMEO_DEF) + __u32_field_def(11, DRBD_GENLA_F_MANDATORY, sndbuf_size, DRBD_SNDBUF_SIZE_DEF) + __u32_field_def(12, DRBD_GENLA_F_MANDATORY, rcvbuf_size, DRBD_RCVBUF_SIZE_DEF) + __u32_field_def(13, DRBD_GENLA_F_MANDATORY, ko_count, DRBD_KO_COUNT_DEF) + __u32_field_def(14, DRBD_GENLA_F_MANDATORY, max_buffers, DRBD_MAX_BUFFERS_DEF) + __u32_field_def(15, DRBD_GENLA_F_MANDATORY, max_epoch_size, DRBD_MAX_EPOCH_SIZE_DEF) + __u32_field_def(16, DRBD_GENLA_F_MANDATORY, unplug_watermark, DRBD_UNPLUG_WATERMARK_DEF) + __u32_field_def(17, DRBD_GENLA_F_MANDATORY, after_sb_0p, DRBD_AFTER_SB_0P_DEF) + __u32_field_def(18, DRBD_GENLA_F_MANDATORY, after_sb_1p, DRBD_AFTER_SB_1P_DEF) + __u32_field_def(19, DRBD_GENLA_F_MANDATORY, after_sb_2p, DRBD_AFTER_SB_2P_DEF) + __u32_field_def(20, DRBD_GENLA_F_MANDATORY, rr_conflict, DRBD_RR_CONFLICT_DEF) + __u32_field_def(21, DRBD_GENLA_F_MANDATORY, on_congestion, DRBD_ON_CONGESTION_DEF) + __u32_field_def(22, DRBD_GENLA_F_MANDATORY, cong_fill, DRBD_CONG_FILL_DEF) + __u32_field_def(23, DRBD_GENLA_F_MANDATORY, cong_extents, DRBD_CONG_EXTENTS_DEF) + __flg_field_def(24, DRBD_GENLA_F_MANDATORY, two_primaries, DRBD_ALLOW_TWO_PRIMARIES_DEF) + __flg_field(25, DRBD_GENLA_F_MANDATORY | DRBD_F_INVARIANT, discard_my_data) + __flg_field_def(26, DRBD_GENLA_F_MANDATORY, tcp_cork, DRBD_TCP_CORK_DEF) + __flg_field_def(27, DRBD_GENLA_F_MANDATORY, always_asbp, DRBD_ALWAYS_ASBP_DEF) + __flg_field(28, DRBD_GENLA_F_MANDATORY | DRBD_F_INVARIANT, tentative) + __flg_field_def(29, DRBD_GENLA_F_MANDATORY, use_rle, DRBD_USE_RLE_DEF) + /* 9: __u32_field_def(30, DRBD_GENLA_F_MANDATORY, fencing_policy, DRBD_FENCING_DEF) */ +) + +GENL_struct(DRBD_NLA_SET_ROLE_PARMS, 6, set_role_parms, + __flg_field(1, DRBD_GENLA_F_MANDATORY, assume_uptodate) +) + +GENL_struct(DRBD_NLA_RESIZE_PARMS, 7, resize_parms, + __u64_field(1, DRBD_GENLA_F_MANDATORY, resize_size) + __flg_field(2, DRBD_GENLA_F_MANDATORY, resize_force) + __flg_field(3, DRBD_GENLA_F_MANDATORY, no_resync) +) + +GENL_struct(DRBD_NLA_STATE_INFO, 8, state_info, + /* the reason of the broadcast, + * if this is an event triggered broadcast. */ + __u32_field(1, DRBD_GENLA_F_MANDATORY, sib_reason) + __u32_field(2, DRBD_F_REQUIRED, current_state) + __u64_field(3, DRBD_GENLA_F_MANDATORY, capacity) + __u64_field(4, DRBD_GENLA_F_MANDATORY, ed_uuid) + + /* These are for broadcast from after state change work. + * prev_state and new_state are from the moment the state change took + * place, new_state is not neccessarily the same as current_state, + * there may have been more state changes since. Which will be + * broadcasted soon, in their respective after state change work. */ + __u32_field(5, DRBD_GENLA_F_MANDATORY, prev_state) + __u32_field(6, DRBD_GENLA_F_MANDATORY, new_state) + + /* if we have a local disk: */ + __bin_field(7, DRBD_GENLA_F_MANDATORY, uuids, (UI_SIZE*sizeof(__u64))) + __u32_field(8, DRBD_GENLA_F_MANDATORY, disk_flags) + __u64_field(9, DRBD_GENLA_F_MANDATORY, bits_total) + __u64_field(10, DRBD_GENLA_F_MANDATORY, bits_oos) + /* and in case resync or online verify is active */ + __u64_field(11, DRBD_GENLA_F_MANDATORY, bits_rs_total) + __u64_field(12, DRBD_GENLA_F_MANDATORY, bits_rs_failed) + + /* for pre and post notifications of helper execution */ + __str_field(13, DRBD_GENLA_F_MANDATORY, helper, 32) + __u32_field(14, DRBD_GENLA_F_MANDATORY, helper_exit_code) + + __u64_field(15, 0, send_cnt) + __u64_field(16, 0, recv_cnt) + __u64_field(17, 0, read_cnt) + __u64_field(18, 0, writ_cnt) + __u64_field(19, 0, al_writ_cnt) + __u64_field(20, 0, bm_writ_cnt) + __u32_field(21, 0, ap_bio_cnt) + __u32_field(22, 0, ap_pending_cnt) + __u32_field(23, 0, rs_pending_cnt) +) + +GENL_struct(DRBD_NLA_START_OV_PARMS, 9, start_ov_parms, + __u64_field(1, DRBD_GENLA_F_MANDATORY, ov_start_sector) + __u64_field(2, DRBD_GENLA_F_MANDATORY, ov_stop_sector) +) + +GENL_struct(DRBD_NLA_NEW_C_UUID_PARMS, 10, new_c_uuid_parms, + __flg_field(1, DRBD_GENLA_F_MANDATORY, clear_bm) +) + +GENL_struct(DRBD_NLA_TIMEOUT_PARMS, 11, timeout_parms, + __u32_field(1, DRBD_F_REQUIRED, timeout_type) +) + +GENL_struct(DRBD_NLA_DISCONNECT_PARMS, 12, disconnect_parms, + __flg_field(1, DRBD_GENLA_F_MANDATORY, force_disconnect) +) + +GENL_struct(DRBD_NLA_DETACH_PARMS, 13, detach_parms, + __flg_field(1, DRBD_GENLA_F_MANDATORY, force_detach) +) + +/* + * Notifications and commands (genlmsghdr->cmd) + */ +GENL_mc_group(events) + + /* kernel -> userspace announcement of changes */ +GENL_notification( + DRBD_EVENT, 1, events, + GENL_tla_expected(DRBD_NLA_CFG_CONTEXT, DRBD_F_REQUIRED) + GENL_tla_expected(DRBD_NLA_STATE_INFO, DRBD_F_REQUIRED) + GENL_tla_expected(DRBD_NLA_NET_CONF, DRBD_GENLA_F_MANDATORY) + GENL_tla_expected(DRBD_NLA_DISK_CONF, DRBD_GENLA_F_MANDATORY) + GENL_tla_expected(DRBD_NLA_SYNCER_CONF, DRBD_GENLA_F_MANDATORY) +) + + /* query kernel for specific or all info */ +GENL_op( + DRBD_ADM_GET_STATUS, 2, + GENL_op_init( + .doit = drbd_adm_get_status, + .dumpit = drbd_adm_get_status_all, + /* anyone may ask for the status, + * it is broadcasted anyways */ + ), + /* To select the object .doit. + * Or a subset of objects in .dumpit. */ + GENL_tla_expected(DRBD_NLA_CFG_CONTEXT, DRBD_GENLA_F_MANDATORY) +) + + /* add DRBD minor devices as volumes to resources */ +GENL_op(DRBD_ADM_NEW_MINOR, 5, GENL_doit(drbd_adm_add_minor), + GENL_tla_expected(DRBD_NLA_CFG_CONTEXT, DRBD_F_REQUIRED)) +GENL_op(DRBD_ADM_DEL_MINOR, 6, GENL_doit(drbd_adm_delete_minor), + GENL_tla_expected(DRBD_NLA_CFG_CONTEXT, DRBD_F_REQUIRED)) + + /* add or delete resources */ +GENL_op(DRBD_ADM_NEW_RESOURCE, 7, GENL_doit(drbd_adm_new_resource), + GENL_tla_expected(DRBD_NLA_CFG_CONTEXT, DRBD_F_REQUIRED)) +GENL_op(DRBD_ADM_DEL_RESOURCE, 8, GENL_doit(drbd_adm_del_resource), + GENL_tla_expected(DRBD_NLA_CFG_CONTEXT, DRBD_F_REQUIRED)) + +GENL_op(DRBD_ADM_RESOURCE_OPTS, 9, + GENL_doit(drbd_adm_resource_opts), + GENL_tla_expected(DRBD_NLA_CFG_CONTEXT, DRBD_F_REQUIRED) + GENL_tla_expected(DRBD_NLA_RESOURCE_OPTS, DRBD_GENLA_F_MANDATORY) +) + +GENL_op( + DRBD_ADM_CONNECT, 10, + GENL_doit(drbd_adm_connect), + GENL_tla_expected(DRBD_NLA_CFG_CONTEXT, DRBD_F_REQUIRED) + GENL_tla_expected(DRBD_NLA_NET_CONF, DRBD_F_REQUIRED) +) + +GENL_op( + DRBD_ADM_CHG_NET_OPTS, 29, + GENL_doit(drbd_adm_net_opts), + GENL_tla_expected(DRBD_NLA_CFG_CONTEXT, DRBD_F_REQUIRED) + GENL_tla_expected(DRBD_NLA_NET_CONF, DRBD_F_REQUIRED) +) + +GENL_op(DRBD_ADM_DISCONNECT, 11, GENL_doit(drbd_adm_disconnect), + GENL_tla_expected(DRBD_NLA_CFG_CONTEXT, DRBD_F_REQUIRED)) + +GENL_op(DRBD_ADM_ATTACH, 12, + GENL_doit(drbd_adm_attach), + GENL_tla_expected(DRBD_NLA_CFG_CONTEXT, DRBD_F_REQUIRED) + GENL_tla_expected(DRBD_NLA_DISK_CONF, DRBD_F_REQUIRED) +) + +GENL_op(DRBD_ADM_CHG_DISK_OPTS, 28, + GENL_doit(drbd_adm_disk_opts), + GENL_tla_expected(DRBD_NLA_CFG_CONTEXT, DRBD_F_REQUIRED) + GENL_tla_expected(DRBD_NLA_DISK_OPTS, DRBD_F_REQUIRED) +) + +GENL_op( + DRBD_ADM_RESIZE, 13, + GENL_doit(drbd_adm_resize), + GENL_tla_expected(DRBD_NLA_CFG_CONTEXT, DRBD_F_REQUIRED) + GENL_tla_expected(DRBD_NLA_RESIZE_PARMS, DRBD_GENLA_F_MANDATORY) +) + +GENL_op( + DRBD_ADM_PRIMARY, 14, + GENL_doit(drbd_adm_set_role), + GENL_tla_expected(DRBD_NLA_CFG_CONTEXT, DRBD_F_REQUIRED) + GENL_tla_expected(DRBD_NLA_SET_ROLE_PARMS, DRBD_F_REQUIRED) +) + +GENL_op( + DRBD_ADM_SECONDARY, 15, + GENL_doit(drbd_adm_set_role), + GENL_tla_expected(DRBD_NLA_CFG_CONTEXT, DRBD_F_REQUIRED) + GENL_tla_expected(DRBD_NLA_SET_ROLE_PARMS, DRBD_F_REQUIRED) +) + +GENL_op( + DRBD_ADM_NEW_C_UUID, 16, + GENL_doit(drbd_adm_new_c_uuid), + GENL_tla_expected(DRBD_NLA_CFG_CONTEXT, DRBD_F_REQUIRED) + GENL_tla_expected(DRBD_NLA_NEW_C_UUID_PARMS, DRBD_GENLA_F_MANDATORY) +) + +GENL_op( + DRBD_ADM_START_OV, 17, + GENL_doit(drbd_adm_start_ov), + GENL_tla_expected(DRBD_NLA_START_OV_PARMS, DRBD_GENLA_F_MANDATORY) +) + +GENL_op(DRBD_ADM_DETACH, 18, GENL_doit(drbd_adm_detach), + GENL_tla_expected(DRBD_NLA_CFG_CONTEXT, DRBD_F_REQUIRED) + GENL_tla_expected(DRBD_NLA_DETACH_PARMS, DRBD_GENLA_F_MANDATORY)) + +GENL_op(DRBD_ADM_INVALIDATE, 19, GENL_doit(drbd_adm_invalidate), + GENL_tla_expected(DRBD_NLA_CFG_CONTEXT, DRBD_F_REQUIRED)) +GENL_op(DRBD_ADM_INVAL_PEER, 20, GENL_doit(drbd_adm_invalidate_peer), + GENL_tla_expected(DRBD_NLA_CFG_CONTEXT, DRBD_F_REQUIRED)) +GENL_op(DRBD_ADM_PAUSE_SYNC, 21, GENL_doit(drbd_adm_pause_sync), + GENL_tla_expected(DRBD_NLA_CFG_CONTEXT, DRBD_F_REQUIRED)) +GENL_op(DRBD_ADM_RESUME_SYNC, 22, GENL_doit(drbd_adm_resume_sync), + GENL_tla_expected(DRBD_NLA_CFG_CONTEXT, DRBD_F_REQUIRED)) +GENL_op(DRBD_ADM_SUSPEND_IO, 23, GENL_doit(drbd_adm_suspend_io), + GENL_tla_expected(DRBD_NLA_CFG_CONTEXT, DRBD_F_REQUIRED)) +GENL_op(DRBD_ADM_RESUME_IO, 24, GENL_doit(drbd_adm_resume_io), + GENL_tla_expected(DRBD_NLA_CFG_CONTEXT, DRBD_F_REQUIRED)) +GENL_op(DRBD_ADM_OUTDATE, 25, GENL_doit(drbd_adm_outdate), + GENL_tla_expected(DRBD_NLA_CFG_CONTEXT, DRBD_F_REQUIRED)) +GENL_op(DRBD_ADM_GET_TIMEOUT_TYPE, 26, GENL_doit(drbd_adm_get_timeout_type), + GENL_tla_expected(DRBD_NLA_CFG_CONTEXT, DRBD_F_REQUIRED)) +GENL_op(DRBD_ADM_DOWN, 27, GENL_doit(drbd_adm_down), + GENL_tla_expected(DRBD_NLA_CFG_CONTEXT, DRBD_F_REQUIRED)) diff --git a/include/linux/drbd_genl_api.h b/include/linux/drbd_genl_api.h new file mode 100644 index 000000000000..9ef50d51e34e --- /dev/null +++ b/include/linux/drbd_genl_api.h @@ -0,0 +1,55 @@ +#ifndef DRBD_GENL_STRUCT_H +#define DRBD_GENL_STRUCT_H + +/** + * struct drbd_genlmsghdr - DRBD specific header used in NETLINK_GENERIC requests + * @minor: + * For admin requests (user -> kernel): which minor device to operate on. + * For (unicast) replies or informational (broadcast) messages + * (kernel -> user): which minor device the information is about. + * If we do not operate on minors, but on connections or resources, + * the minor value shall be (~0), and the attribute DRBD_NLA_CFG_CONTEXT + * is used instead. + * @flags: possible operation modifiers (relevant only for user->kernel): + * DRBD_GENL_F_SET_DEFAULTS + * @volume: + * When creating a new minor (adding it to a resource), the resource needs + * to know which volume number within the resource this is supposed to be. + * The volume number corresponds to the same volume number on the remote side, + * whereas the minor number on the remote side may be different + * (union with flags). + * @ret_code: kernel->userland unicast cfg reply return code (union with flags); + */ +struct drbd_genlmsghdr { + __u32 minor; + union { + __u32 flags; + __s32 ret_code; + }; +}; + +/* To be used in drbd_genlmsghdr.flags */ +enum { + DRBD_GENL_F_SET_DEFAULTS = 1, +}; + +enum drbd_state_info_bcast_reason { + SIB_GET_STATUS_REPLY = 1, + SIB_STATE_CHANGE = 2, + SIB_HELPER_PRE = 3, + SIB_HELPER_POST = 4, + SIB_SYNC_PROGRESS = 5, +}; + +/* hack around predefined gcc/cpp "linux=1", + * we cannot possibly include <1/drbd_genl.h> */ +#undef linux + +#include <linux/drbd.h> +#define GENL_MAGIC_VERSION API_VERSION +#define GENL_MAGIC_FAMILY drbd +#define GENL_MAGIC_FAMILY_HDRSZ sizeof(struct drbd_genlmsghdr) +#define GENL_MAGIC_INCLUDE_FILE <linux/drbd_genl.h> +#include <linux/genl_magic_struct.h> + +#endif diff --git a/include/linux/drbd_limits.h b/include/linux/drbd_limits.h index fb670bf603f7..1fa19c5f5e64 100644 --- a/include/linux/drbd_limits.h +++ b/include/linux/drbd_limits.h @@ -16,29 +16,37 @@ #define DEBUG_RANGE_CHECK 0 #define DRBD_MINOR_COUNT_MIN 1 -#define DRBD_MINOR_COUNT_MAX 256 +#define DRBD_MINOR_COUNT_MAX 255 #define DRBD_MINOR_COUNT_DEF 32 +#define DRBD_MINOR_COUNT_SCALE '1' + +#define DRBD_VOLUME_MAX 65535 #define DRBD_DIALOG_REFRESH_MIN 0 #define DRBD_DIALOG_REFRESH_MAX 600 +#define DRBD_DIALOG_REFRESH_SCALE '1' /* valid port number */ #define DRBD_PORT_MIN 1 #define DRBD_PORT_MAX 0xffff +#define DRBD_PORT_SCALE '1' /* startup { */ /* if you want more than 3.4 days, disable */ #define DRBD_WFC_TIMEOUT_MIN 0 #define DRBD_WFC_TIMEOUT_MAX 300000 #define DRBD_WFC_TIMEOUT_DEF 0 +#define DRBD_WFC_TIMEOUT_SCALE '1' #define DRBD_DEGR_WFC_TIMEOUT_MIN 0 #define DRBD_DEGR_WFC_TIMEOUT_MAX 300000 #define DRBD_DEGR_WFC_TIMEOUT_DEF 0 +#define DRBD_DEGR_WFC_TIMEOUT_SCALE '1' #define DRBD_OUTDATED_WFC_TIMEOUT_MIN 0 #define DRBD_OUTDATED_WFC_TIMEOUT_MAX 300000 #define DRBD_OUTDATED_WFC_TIMEOUT_DEF 0 +#define DRBD_OUTDATED_WFC_TIMEOUT_SCALE '1' /* }*/ /* net { */ @@ -47,75 +55,91 @@ #define DRBD_TIMEOUT_MIN 1 #define DRBD_TIMEOUT_MAX 600 #define DRBD_TIMEOUT_DEF 60 /* 6 seconds */ +#define DRBD_TIMEOUT_SCALE '1' /* If backing disk takes longer than disk_timeout, mark the disk as failed */ #define DRBD_DISK_TIMEOUT_MIN 0 /* 0 = disabled */ #define DRBD_DISK_TIMEOUT_MAX 6000 /* 10 Minutes */ #define DRBD_DISK_TIMEOUT_DEF 0 /* disabled */ +#define DRBD_DISK_TIMEOUT_SCALE '1' /* active connection retries when C_WF_CONNECTION */ #define DRBD_CONNECT_INT_MIN 1 #define DRBD_CONNECT_INT_MAX 120 #define DRBD_CONNECT_INT_DEF 10 /* seconds */ +#define DRBD_CONNECT_INT_SCALE '1' /* keep-alive probes when idle */ #define DRBD_PING_INT_MIN 1 #define DRBD_PING_INT_MAX 120 #define DRBD_PING_INT_DEF 10 +#define DRBD_PING_INT_SCALE '1' /* timeout for the ping packets.*/ #define DRBD_PING_TIMEO_MIN 1 #define DRBD_PING_TIMEO_MAX 300 #define DRBD_PING_TIMEO_DEF 5 +#define DRBD_PING_TIMEO_SCALE '1' /* max number of write requests between write barriers */ #define DRBD_MAX_EPOCH_SIZE_MIN 1 #define DRBD_MAX_EPOCH_SIZE_MAX 20000 #define DRBD_MAX_EPOCH_SIZE_DEF 2048 +#define DRBD_MAX_EPOCH_SIZE_SCALE '1' /* I don't think that a tcp send buffer of more than 10M is useful */ #define DRBD_SNDBUF_SIZE_MIN 0 #define DRBD_SNDBUF_SIZE_MAX (10<<20) #define DRBD_SNDBUF_SIZE_DEF 0 +#define DRBD_SNDBUF_SIZE_SCALE '1' #define DRBD_RCVBUF_SIZE_MIN 0 #define DRBD_RCVBUF_SIZE_MAX (10<<20) #define DRBD_RCVBUF_SIZE_DEF 0 +#define DRBD_RCVBUF_SIZE_SCALE '1' /* @4k PageSize -> 128kB - 512MB */ #define DRBD_MAX_BUFFERS_MIN 32 #define DRBD_MAX_BUFFERS_MAX 131072 #define DRBD_MAX_BUFFERS_DEF 2048 +#define DRBD_MAX_BUFFERS_SCALE '1' /* @4k PageSize -> 4kB - 512MB */ #define DRBD_UNPLUG_WATERMARK_MIN 1 #define DRBD_UNPLUG_WATERMARK_MAX 131072 #define DRBD_UNPLUG_WATERMARK_DEF (DRBD_MAX_BUFFERS_DEF/16) +#define DRBD_UNPLUG_WATERMARK_SCALE '1' /* 0 is disabled. * 200 should be more than enough even for very short timeouts */ #define DRBD_KO_COUNT_MIN 0 #define DRBD_KO_COUNT_MAX 200 -#define DRBD_KO_COUNT_DEF 0 +#define DRBD_KO_COUNT_DEF 7 +#define DRBD_KO_COUNT_SCALE '1' /* } */ /* syncer { */ /* FIXME allow rate to be zero? */ -#define DRBD_RATE_MIN 1 +#define DRBD_RESYNC_RATE_MIN 1 /* channel bonding 10 GbE, or other hardware */ -#define DRBD_RATE_MAX (4 << 20) -#define DRBD_RATE_DEF 250 /* kb/second */ +#define DRBD_RESYNC_RATE_MAX (4 << 20) +#define DRBD_RESYNC_RATE_DEF 250 +#define DRBD_RESYNC_RATE_SCALE 'k' /* kilobytes */ /* less than 7 would hit performance unnecessarily. - * 3833 is the largest prime that still does fit - * into 64 sectors of activity log */ + * 919 slots context information per transaction, + * 32k activity log, 4k transaction size, + * one transaction in flight: + * 919 * 7 = 6433 */ #define DRBD_AL_EXTENTS_MIN 7 -#define DRBD_AL_EXTENTS_MAX 3833 -#define DRBD_AL_EXTENTS_DEF 127 +#define DRBD_AL_EXTENTS_MAX 6433 +#define DRBD_AL_EXTENTS_DEF 1237 +#define DRBD_AL_EXTENTS_SCALE '1' -#define DRBD_AFTER_MIN -1 -#define DRBD_AFTER_MAX 255 -#define DRBD_AFTER_DEF -1 +#define DRBD_MINOR_NUMBER_MIN -1 +#define DRBD_MINOR_NUMBER_MAX ((1 << 20) - 1) +#define DRBD_MINOR_NUMBER_DEF -1 +#define DRBD_MINOR_NUMBER_SCALE '1' /* } */ @@ -124,11 +148,12 @@ * the upper limit with 64bit kernel, enough ram and flexible meta data * is 1 PiB, currently. */ /* DRBD_MAX_SECTORS */ -#define DRBD_DISK_SIZE_SECT_MIN 0 -#define DRBD_DISK_SIZE_SECT_MAX (1 * (2LLU << 40)) -#define DRBD_DISK_SIZE_SECT_DEF 0 /* = disabled = no user size... */ +#define DRBD_DISK_SIZE_MIN 0 +#define DRBD_DISK_SIZE_MAX (1 * (2LLU << 40)) +#define DRBD_DISK_SIZE_DEF 0 /* = disabled = no user size... */ +#define DRBD_DISK_SIZE_SCALE 's' /* sectors */ -#define DRBD_ON_IO_ERROR_DEF EP_PASS_ON +#define DRBD_ON_IO_ERROR_DEF EP_DETACH #define DRBD_FENCING_DEF FP_DONT_CARE #define DRBD_AFTER_SB_0P_DEF ASB_DISCONNECT #define DRBD_AFTER_SB_1P_DEF ASB_DISCONNECT @@ -136,38 +161,59 @@ #define DRBD_RR_CONFLICT_DEF ASB_DISCONNECT #define DRBD_ON_NO_DATA_DEF OND_IO_ERROR #define DRBD_ON_CONGESTION_DEF OC_BLOCK +#define DRBD_READ_BALANCING_DEF RB_PREFER_LOCAL #define DRBD_MAX_BIO_BVECS_MIN 0 #define DRBD_MAX_BIO_BVECS_MAX 128 #define DRBD_MAX_BIO_BVECS_DEF 0 +#define DRBD_MAX_BIO_BVECS_SCALE '1' #define DRBD_C_PLAN_AHEAD_MIN 0 #define DRBD_C_PLAN_AHEAD_MAX 300 -#define DRBD_C_PLAN_AHEAD_DEF 0 /* RS rate controller disabled by default */ +#define DRBD_C_PLAN_AHEAD_DEF 20 +#define DRBD_C_PLAN_AHEAD_SCALE '1' #define DRBD_C_DELAY_TARGET_MIN 1 #define DRBD_C_DELAY_TARGET_MAX 100 #define DRBD_C_DELAY_TARGET_DEF 10 +#define DRBD_C_DELAY_TARGET_SCALE '1' #define DRBD_C_FILL_TARGET_MIN 0 #define DRBD_C_FILL_TARGET_MAX (1<<20) /* 500MByte in sec */ -#define DRBD_C_FILL_TARGET_DEF 0 /* By default disabled -> controlled by delay_target */ +#define DRBD_C_FILL_TARGET_DEF 100 /* Try to place 50KiB in socket send buffer during resync */ +#define DRBD_C_FILL_TARGET_SCALE 's' /* sectors */ -#define DRBD_C_MAX_RATE_MIN 250 /* kByte/sec */ +#define DRBD_C_MAX_RATE_MIN 250 #define DRBD_C_MAX_RATE_MAX (4 << 20) #define DRBD_C_MAX_RATE_DEF 102400 +#define DRBD_C_MAX_RATE_SCALE 'k' /* kilobytes */ -#define DRBD_C_MIN_RATE_MIN 0 /* kByte/sec */ +#define DRBD_C_MIN_RATE_MIN 0 #define DRBD_C_MIN_RATE_MAX (4 << 20) -#define DRBD_C_MIN_RATE_DEF 4096 +#define DRBD_C_MIN_RATE_DEF 250 +#define DRBD_C_MIN_RATE_SCALE 'k' /* kilobytes */ #define DRBD_CONG_FILL_MIN 0 #define DRBD_CONG_FILL_MAX (10<<21) /* 10GByte in sectors */ #define DRBD_CONG_FILL_DEF 0 +#define DRBD_CONG_FILL_SCALE 's' /* sectors */ #define DRBD_CONG_EXTENTS_MIN DRBD_AL_EXTENTS_MIN #define DRBD_CONG_EXTENTS_MAX DRBD_AL_EXTENTS_MAX #define DRBD_CONG_EXTENTS_DEF DRBD_AL_EXTENTS_DEF +#define DRBD_CONG_EXTENTS_SCALE DRBD_AL_EXTENTS_SCALE + +#define DRBD_PROTOCOL_DEF DRBD_PROT_C + +#define DRBD_DISK_BARRIER_DEF 0 +#define DRBD_DISK_FLUSHES_DEF 1 +#define DRBD_DISK_DRAIN_DEF 1 +#define DRBD_MD_FLUSHES_DEF 1 +#define DRBD_TCP_CORK_DEF 1 +#define DRBD_AL_UPDATES_DEF 1 + +#define DRBD_ALLOW_TWO_PRIMARIES_DEF 0 +#define DRBD_ALWAYS_ASBP_DEF 0 +#define DRBD_USE_RLE_DEF 1 -#undef RANGE #endif diff --git a/include/linux/drbd_nl.h b/include/linux/drbd_nl.h deleted file mode 100644 index a8706f08ab36..000000000000 --- a/include/linux/drbd_nl.h +++ /dev/null @@ -1,163 +0,0 @@ -/* - PAKET( name, - TYPE ( pn, pr, member ) - ... - ) - - You may never reissue one of the pn arguments -*/ - -#if !defined(NL_PACKET) || !defined(NL_STRING) || !defined(NL_INTEGER) || !defined(NL_BIT) || !defined(NL_INT64) -#error "The macros NL_PACKET, NL_STRING, NL_INTEGER, NL_INT64 and NL_BIT needs to be defined" -#endif - -NL_PACKET(primary, 1, - NL_BIT( 1, T_MAY_IGNORE, primary_force) -) - -NL_PACKET(secondary, 2, ) - -NL_PACKET(disk_conf, 3, - NL_INT64( 2, T_MAY_IGNORE, disk_size) - NL_STRING( 3, T_MANDATORY, backing_dev, 128) - NL_STRING( 4, T_MANDATORY, meta_dev, 128) - NL_INTEGER( 5, T_MANDATORY, meta_dev_idx) - NL_INTEGER( 6, T_MAY_IGNORE, on_io_error) - NL_INTEGER( 7, T_MAY_IGNORE, fencing) - NL_BIT( 37, T_MAY_IGNORE, use_bmbv) - NL_BIT( 53, T_MAY_IGNORE, no_disk_flush) - NL_BIT( 54, T_MAY_IGNORE, no_md_flush) - /* 55 max_bio_size was available in 8.2.6rc2 */ - NL_INTEGER( 56, T_MAY_IGNORE, max_bio_bvecs) - NL_BIT( 57, T_MAY_IGNORE, no_disk_barrier) - NL_BIT( 58, T_MAY_IGNORE, no_disk_drain) - NL_INTEGER( 89, T_MAY_IGNORE, disk_timeout) -) - -NL_PACKET(detach, 4, - NL_BIT( 88, T_MANDATORY, detach_force) -) - -NL_PACKET(net_conf, 5, - NL_STRING( 8, T_MANDATORY, my_addr, 128) - NL_STRING( 9, T_MANDATORY, peer_addr, 128) - NL_STRING( 10, T_MAY_IGNORE, shared_secret, SHARED_SECRET_MAX) - NL_STRING( 11, T_MAY_IGNORE, cram_hmac_alg, SHARED_SECRET_MAX) - NL_STRING( 44, T_MAY_IGNORE, integrity_alg, SHARED_SECRET_MAX) - NL_INTEGER( 14, T_MAY_IGNORE, timeout) - NL_INTEGER( 15, T_MANDATORY, wire_protocol) - NL_INTEGER( 16, T_MAY_IGNORE, try_connect_int) - NL_INTEGER( 17, T_MAY_IGNORE, ping_int) - NL_INTEGER( 18, T_MAY_IGNORE, max_epoch_size) - NL_INTEGER( 19, T_MAY_IGNORE, max_buffers) - NL_INTEGER( 20, T_MAY_IGNORE, unplug_watermark) - NL_INTEGER( 21, T_MAY_IGNORE, sndbuf_size) - NL_INTEGER( 22, T_MAY_IGNORE, ko_count) - NL_INTEGER( 24, T_MAY_IGNORE, after_sb_0p) - NL_INTEGER( 25, T_MAY_IGNORE, after_sb_1p) - NL_INTEGER( 26, T_MAY_IGNORE, after_sb_2p) - NL_INTEGER( 39, T_MAY_IGNORE, rr_conflict) - NL_INTEGER( 40, T_MAY_IGNORE, ping_timeo) - NL_INTEGER( 67, T_MAY_IGNORE, rcvbuf_size) - NL_INTEGER( 81, T_MAY_IGNORE, on_congestion) - NL_INTEGER( 82, T_MAY_IGNORE, cong_fill) - NL_INTEGER( 83, T_MAY_IGNORE, cong_extents) - /* 59 addr_family was available in GIT, never released */ - NL_BIT( 60, T_MANDATORY, mind_af) - NL_BIT( 27, T_MAY_IGNORE, want_lose) - NL_BIT( 28, T_MAY_IGNORE, two_primaries) - NL_BIT( 41, T_MAY_IGNORE, always_asbp) - NL_BIT( 61, T_MAY_IGNORE, no_cork) - NL_BIT( 62, T_MANDATORY, auto_sndbuf_size) - NL_BIT( 70, T_MANDATORY, dry_run) -) - -NL_PACKET(disconnect, 6, - NL_BIT( 84, T_MAY_IGNORE, force) -) - -NL_PACKET(resize, 7, - NL_INT64( 29, T_MAY_IGNORE, resize_size) - NL_BIT( 68, T_MAY_IGNORE, resize_force) - NL_BIT( 69, T_MANDATORY, no_resync) -) - -NL_PACKET(syncer_conf, 8, - NL_INTEGER( 30, T_MAY_IGNORE, rate) - NL_INTEGER( 31, T_MAY_IGNORE, after) - NL_INTEGER( 32, T_MAY_IGNORE, al_extents) -/* NL_INTEGER( 71, T_MAY_IGNORE, dp_volume) - * NL_INTEGER( 72, T_MAY_IGNORE, dp_interval) - * NL_INTEGER( 73, T_MAY_IGNORE, throttle_th) - * NL_INTEGER( 74, T_MAY_IGNORE, hold_off_th) - * feature will be reimplemented differently with 8.3.9 */ - NL_STRING( 52, T_MAY_IGNORE, verify_alg, SHARED_SECRET_MAX) - NL_STRING( 51, T_MAY_IGNORE, cpu_mask, 32) - NL_STRING( 64, T_MAY_IGNORE, csums_alg, SHARED_SECRET_MAX) - NL_BIT( 65, T_MAY_IGNORE, use_rle) - NL_INTEGER( 75, T_MAY_IGNORE, on_no_data) - NL_INTEGER( 76, T_MAY_IGNORE, c_plan_ahead) - NL_INTEGER( 77, T_MAY_IGNORE, c_delay_target) - NL_INTEGER( 78, T_MAY_IGNORE, c_fill_target) - NL_INTEGER( 79, T_MAY_IGNORE, c_max_rate) - NL_INTEGER( 80, T_MAY_IGNORE, c_min_rate) -) - -NL_PACKET(invalidate, 9, ) -NL_PACKET(invalidate_peer, 10, ) -NL_PACKET(pause_sync, 11, ) -NL_PACKET(resume_sync, 12, ) -NL_PACKET(suspend_io, 13, ) -NL_PACKET(resume_io, 14, ) -NL_PACKET(outdate, 15, ) -NL_PACKET(get_config, 16, ) -NL_PACKET(get_state, 17, - NL_INTEGER( 33, T_MAY_IGNORE, state_i) -) - -NL_PACKET(get_uuids, 18, - NL_STRING( 34, T_MAY_IGNORE, uuids, (UI_SIZE*sizeof(__u64))) - NL_INTEGER( 35, T_MAY_IGNORE, uuids_flags) -) - -NL_PACKET(get_timeout_flag, 19, - NL_BIT( 36, T_MAY_IGNORE, use_degraded) -) - -NL_PACKET(call_helper, 20, - NL_STRING( 38, T_MAY_IGNORE, helper, 32) -) - -/* Tag nr 42 already allocated in drbd-8.1 development. */ - -NL_PACKET(sync_progress, 23, - NL_INTEGER( 43, T_MAY_IGNORE, sync_progress) -) - -NL_PACKET(dump_ee, 24, - NL_STRING( 45, T_MAY_IGNORE, dump_ee_reason, 32) - NL_STRING( 46, T_MAY_IGNORE, seen_digest, SHARED_SECRET_MAX) - NL_STRING( 47, T_MAY_IGNORE, calc_digest, SHARED_SECRET_MAX) - NL_INT64( 48, T_MAY_IGNORE, ee_sector) - NL_INT64( 49, T_MAY_IGNORE, ee_block_id) - NL_STRING( 50, T_MAY_IGNORE, ee_data, 32 << 10) -) - -NL_PACKET(start_ov, 25, - NL_INT64( 66, T_MAY_IGNORE, start_sector) -) - -NL_PACKET(new_c_uuid, 26, - NL_BIT( 63, T_MANDATORY, clear_bm) -) - -#ifdef NL_RESPONSE -NL_RESPONSE(return_code_only, 27) -#endif - -#undef NL_PACKET -#undef NL_INTEGER -#undef NL_INT64 -#undef NL_BIT -#undef NL_STRING -#undef NL_RESPONSE diff --git a/include/linux/drbd_tag_magic.h b/include/linux/drbd_tag_magic.h deleted file mode 100644 index 82de1f9e48b1..000000000000 --- a/include/linux/drbd_tag_magic.h +++ /dev/null @@ -1,84 +0,0 @@ -#ifndef DRBD_TAG_MAGIC_H -#define DRBD_TAG_MAGIC_H - -#define TT_END 0 -#define TT_REMOVED 0xE000 - -/* declare packet_type enums */ -enum packet_types { -#define NL_PACKET(name, number, fields) P_ ## name = number, -#define NL_RESPONSE(name, number) P_ ## name = number, -#define NL_INTEGER(pn, pr, member) -#define NL_INT64(pn, pr, member) -#define NL_BIT(pn, pr, member) -#define NL_STRING(pn, pr, member, len) -#include <linux/drbd_nl.h> - P_nl_after_last_packet, -}; - -/* These struct are used to deduce the size of the tag lists: */ -#define NL_PACKET(name, number, fields) \ - struct name ## _tag_len_struct { fields }; -#define NL_INTEGER(pn, pr, member) \ - int member; int tag_and_len ## member; -#define NL_INT64(pn, pr, member) \ - __u64 member; int tag_and_len ## member; -#define NL_BIT(pn, pr, member) \ - unsigned char member:1; int tag_and_len ## member; -#define NL_STRING(pn, pr, member, len) \ - unsigned char member[len]; int member ## _len; \ - int tag_and_len ## member; -#include <linux/drbd_nl.h> - -/* declare tag-list-sizes */ -static const int tag_list_sizes[] = { -#define NL_PACKET(name, number, fields) 2 fields , -#define NL_INTEGER(pn, pr, member) + 4 + 4 -#define NL_INT64(pn, pr, member) + 4 + 8 -#define NL_BIT(pn, pr, member) + 4 + 1 -#define NL_STRING(pn, pr, member, len) + 4 + (len) -#include <linux/drbd_nl.h> -}; - -/* The two highest bits are used for the tag type */ -#define TT_MASK 0xC000 -#define TT_INTEGER 0x0000 -#define TT_INT64 0x4000 -#define TT_BIT 0x8000 -#define TT_STRING 0xC000 -/* The next bit indicates if processing of the tag is mandatory */ -#define T_MANDATORY 0x2000 -#define T_MAY_IGNORE 0x0000 -#define TN_MASK 0x1fff -/* The remaining 13 bits are used to enumerate the tags */ - -#define tag_type(T) ((T) & TT_MASK) -#define tag_number(T) ((T) & TN_MASK) - -/* declare tag enums */ -#define NL_PACKET(name, number, fields) fields -enum drbd_tags { -#define NL_INTEGER(pn, pr, member) T_ ## member = pn | TT_INTEGER | pr , -#define NL_INT64(pn, pr, member) T_ ## member = pn | TT_INT64 | pr , -#define NL_BIT(pn, pr, member) T_ ## member = pn | TT_BIT | pr , -#define NL_STRING(pn, pr, member, len) T_ ## member = pn | TT_STRING | pr , -#include <linux/drbd_nl.h> -}; - -struct tag { - const char *name; - int type_n_flags; - int max_len; -}; - -/* declare tag names */ -#define NL_PACKET(name, number, fields) fields -static const struct tag tag_descriptions[] = { -#define NL_INTEGER(pn, pr, member) [ pn ] = { #member, TT_INTEGER | pr, sizeof(int) }, -#define NL_INT64(pn, pr, member) [ pn ] = { #member, TT_INT64 | pr, sizeof(__u64) }, -#define NL_BIT(pn, pr, member) [ pn ] = { #member, TT_BIT | pr, sizeof(int) }, -#define NL_STRING(pn, pr, member, len) [ pn ] = { #member, TT_STRING | pr, (len) }, -#include <linux/drbd_nl.h> -}; - -#endif diff --git a/include/linux/dvb/Kbuild b/include/linux/dvb/Kbuild deleted file mode 100644 index f4dba8637f98..000000000000 --- a/include/linux/dvb/Kbuild +++ /dev/null @@ -1,8 +0,0 @@ -header-y += audio.h -header-y += ca.h -header-y += dmx.h -header-y += frontend.h -header-y += net.h -header-y += osd.h -header-y += version.h -header-y += video.h diff --git a/include/linux/dvb/audio.h b/include/linux/dvb/audio.h deleted file mode 100644 index d47bccd604e4..000000000000 --- a/include/linux/dvb/audio.h +++ /dev/null @@ -1,135 +0,0 @@ -/* - * audio.h - * - * Copyright (C) 2000 Ralph Metzler <ralph@convergence.de> - * & Marcus Metzler <marcus@convergence.de> - * for convergence integrated media GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Lesser Public License - * as published by the Free Software Foundation; either version 2.1 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - */ - -#ifndef _DVBAUDIO_H_ -#define _DVBAUDIO_H_ - -#include <linux/types.h> - -typedef enum { - AUDIO_SOURCE_DEMUX, /* Select the demux as the main source */ - AUDIO_SOURCE_MEMORY /* Select internal memory as the main source */ -} audio_stream_source_t; - - -typedef enum { - AUDIO_STOPPED, /* Device is stopped */ - AUDIO_PLAYING, /* Device is currently playing */ - AUDIO_PAUSED /* Device is paused */ -} audio_play_state_t; - - -typedef enum { - AUDIO_STEREO, - AUDIO_MONO_LEFT, - AUDIO_MONO_RIGHT, - AUDIO_MONO, - AUDIO_STEREO_SWAPPED -} audio_channel_select_t; - - -typedef struct audio_mixer { - unsigned int volume_left; - unsigned int volume_right; - // what else do we need? bass, pass-through, ... -} audio_mixer_t; - - -typedef struct audio_status { - int AV_sync_state; /* sync audio and video? */ - int mute_state; /* audio is muted */ - audio_play_state_t play_state; /* current playback state */ - audio_stream_source_t stream_source; /* current stream source */ - audio_channel_select_t channel_select; /* currently selected channel */ - int bypass_mode; /* pass on audio data to */ - audio_mixer_t mixer_state; /* current mixer state */ -} audio_status_t; /* separate decoder hardware */ - - -typedef -struct audio_karaoke { /* if Vocal1 or Vocal2 are non-zero, they get mixed */ - int vocal1; /* into left and right t at 70% each */ - int vocal2; /* if both, Vocal1 and Vocal2 are non-zero, Vocal1 gets*/ - int melody; /* mixed into the left channel and */ - /* Vocal2 into the right channel at 100% each. */ - /* if Melody is non-zero, the melody channel gets mixed*/ -} audio_karaoke_t; /* into left and right */ - - -typedef __u16 audio_attributes_t; -/* bits: descr. */ -/* 15-13 audio coding mode (0=ac3, 2=mpeg1, 3=mpeg2ext, 4=LPCM, 6=DTS, */ -/* 12 multichannel extension */ -/* 11-10 audio type (0=not spec, 1=language included) */ -/* 9- 8 audio application mode (0=not spec, 1=karaoke, 2=surround) */ -/* 7- 6 Quantization / DRC (mpeg audio: 1=DRC exists)(lpcm: 0=16bit, */ -/* 5- 4 Sample frequency fs (0=48kHz, 1=96kHz) */ -/* 2- 0 number of audio channels (n+1 channels) */ - - -/* for GET_CAPABILITIES and SET_FORMAT, the latter should only set one bit */ -#define AUDIO_CAP_DTS 1 -#define AUDIO_CAP_LPCM 2 -#define AUDIO_CAP_MP1 4 -#define AUDIO_CAP_MP2 8 -#define AUDIO_CAP_MP3 16 -#define AUDIO_CAP_AAC 32 -#define AUDIO_CAP_OGG 64 -#define AUDIO_CAP_SDDS 128 -#define AUDIO_CAP_AC3 256 - -#define AUDIO_STOP _IO('o', 1) -#define AUDIO_PLAY _IO('o', 2) -#define AUDIO_PAUSE _IO('o', 3) -#define AUDIO_CONTINUE _IO('o', 4) -#define AUDIO_SELECT_SOURCE _IO('o', 5) -#define AUDIO_SET_MUTE _IO('o', 6) -#define AUDIO_SET_AV_SYNC _IO('o', 7) -#define AUDIO_SET_BYPASS_MODE _IO('o', 8) -#define AUDIO_CHANNEL_SELECT _IO('o', 9) -#define AUDIO_GET_STATUS _IOR('o', 10, audio_status_t) - -#define AUDIO_GET_CAPABILITIES _IOR('o', 11, unsigned int) -#define AUDIO_CLEAR_BUFFER _IO('o', 12) -#define AUDIO_SET_ID _IO('o', 13) -#define AUDIO_SET_MIXER _IOW('o', 14, audio_mixer_t) -#define AUDIO_SET_STREAMTYPE _IO('o', 15) -#define AUDIO_SET_EXT_ID _IO('o', 16) -#define AUDIO_SET_ATTRIBUTES _IOW('o', 17, audio_attributes_t) -#define AUDIO_SET_KARAOKE _IOW('o', 18, audio_karaoke_t) - -/** - * AUDIO_GET_PTS - * - * Read the 33 bit presentation time stamp as defined - * in ITU T-REC-H.222.0 / ISO/IEC 13818-1. - * - * The PTS should belong to the currently played - * frame if possible, but may also be a value close to it - * like the PTS of the last decoded frame or the last PTS - * extracted by the PES parser. - */ -#define AUDIO_GET_PTS _IOR('o', 19, __u64) -#define AUDIO_BILINGUAL_CHANNEL_SELECT _IO('o', 20) - -#endif /* _DVBAUDIO_H_ */ diff --git a/include/linux/dvb/ca.h b/include/linux/dvb/ca.h deleted file mode 100644 index c18537f3e449..000000000000 --- a/include/linux/dvb/ca.h +++ /dev/null @@ -1,90 +0,0 @@ -/* - * ca.h - * - * Copyright (C) 2000 Ralph Metzler <ralph@convergence.de> - * & Marcus Metzler <marcus@convergence.de> - * for convergence integrated media GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Lesser Public License - * as published by the Free Software Foundation; either version 2.1 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - */ - -#ifndef _DVBCA_H_ -#define _DVBCA_H_ - -/* slot interface types and info */ - -typedef struct ca_slot_info { - int num; /* slot number */ - - int type; /* CA interface this slot supports */ -#define CA_CI 1 /* CI high level interface */ -#define CA_CI_LINK 2 /* CI link layer level interface */ -#define CA_CI_PHYS 4 /* CI physical layer level interface */ -#define CA_DESCR 8 /* built-in descrambler */ -#define CA_SC 128 /* simple smart card interface */ - - unsigned int flags; -#define CA_CI_MODULE_PRESENT 1 /* module (or card) inserted */ -#define CA_CI_MODULE_READY 2 -} ca_slot_info_t; - - -/* descrambler types and info */ - -typedef struct ca_descr_info { - unsigned int num; /* number of available descramblers (keys) */ - unsigned int type; /* type of supported scrambling system */ -#define CA_ECD 1 -#define CA_NDS 2 -#define CA_DSS 4 -} ca_descr_info_t; - -typedef struct ca_caps { - unsigned int slot_num; /* total number of CA card and module slots */ - unsigned int slot_type; /* OR of all supported types */ - unsigned int descr_num; /* total number of descrambler slots (keys) */ - unsigned int descr_type; /* OR of all supported types */ -} ca_caps_t; - -/* a message to/from a CI-CAM */ -typedef struct ca_msg { - unsigned int index; - unsigned int type; - unsigned int length; - unsigned char msg[256]; -} ca_msg_t; - -typedef struct ca_descr { - unsigned int index; - unsigned int parity; /* 0 == even, 1 == odd */ - unsigned char cw[8]; -} ca_descr_t; - -typedef struct ca_pid { - unsigned int pid; - int index; /* -1 == disable*/ -} ca_pid_t; - -#define CA_RESET _IO('o', 128) -#define CA_GET_CAP _IOR('o', 129, ca_caps_t) -#define CA_GET_SLOT_INFO _IOR('o', 130, ca_slot_info_t) -#define CA_GET_DESCR_INFO _IOR('o', 131, ca_descr_info_t) -#define CA_GET_MSG _IOR('o', 132, ca_msg_t) -#define CA_SEND_MSG _IOW('o', 133, ca_msg_t) -#define CA_SET_DESCR _IOW('o', 134, ca_descr_t) -#define CA_SET_PID _IOW('o', 135, ca_pid_t) - -#endif diff --git a/include/linux/dvb/dmx.h b/include/linux/dvb/dmx.h deleted file mode 100644 index f078f3ac82d4..000000000000 --- a/include/linux/dvb/dmx.h +++ /dev/null @@ -1,157 +0,0 @@ -/* - * dmx.h - * - * Copyright (C) 2000 Marcus Metzler <marcus@convergence.de> - * & Ralph Metzler <ralph@convergence.de> - * for convergence integrated media GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public License - * as published by the Free Software Foundation; either version 2.1 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - */ - -#ifndef _DVBDMX_H_ -#define _DVBDMX_H_ - -#include <linux/types.h> -#ifdef __KERNEL__ -#include <linux/time.h> -#else -#include <time.h> -#endif - - -#define DMX_FILTER_SIZE 16 - -typedef enum -{ - DMX_OUT_DECODER, /* Streaming directly to decoder. */ - DMX_OUT_TAP, /* Output going to a memory buffer */ - /* (to be retrieved via the read command).*/ - DMX_OUT_TS_TAP, /* Output multiplexed into a new TS */ - /* (to be retrieved by reading from the */ - /* logical DVR device). */ - DMX_OUT_TSDEMUX_TAP /* Like TS_TAP but retrieved from the DMX device */ -} dmx_output_t; - - -typedef enum -{ - DMX_IN_FRONTEND, /* Input from a front-end device. */ - DMX_IN_DVR /* Input from the logical DVR device. */ -} dmx_input_t; - - -typedef enum -{ - DMX_PES_AUDIO0, - DMX_PES_VIDEO0, - DMX_PES_TELETEXT0, - DMX_PES_SUBTITLE0, - DMX_PES_PCR0, - - DMX_PES_AUDIO1, - DMX_PES_VIDEO1, - DMX_PES_TELETEXT1, - DMX_PES_SUBTITLE1, - DMX_PES_PCR1, - - DMX_PES_AUDIO2, - DMX_PES_VIDEO2, - DMX_PES_TELETEXT2, - DMX_PES_SUBTITLE2, - DMX_PES_PCR2, - - DMX_PES_AUDIO3, - DMX_PES_VIDEO3, - DMX_PES_TELETEXT3, - DMX_PES_SUBTITLE3, - DMX_PES_PCR3, - - DMX_PES_OTHER -} dmx_pes_type_t; - -#define DMX_PES_AUDIO DMX_PES_AUDIO0 -#define DMX_PES_VIDEO DMX_PES_VIDEO0 -#define DMX_PES_TELETEXT DMX_PES_TELETEXT0 -#define DMX_PES_SUBTITLE DMX_PES_SUBTITLE0 -#define DMX_PES_PCR DMX_PES_PCR0 - - -typedef struct dmx_filter -{ - __u8 filter[DMX_FILTER_SIZE]; - __u8 mask[DMX_FILTER_SIZE]; - __u8 mode[DMX_FILTER_SIZE]; -} dmx_filter_t; - - -struct dmx_sct_filter_params -{ - __u16 pid; - dmx_filter_t filter; - __u32 timeout; - __u32 flags; -#define DMX_CHECK_CRC 1 -#define DMX_ONESHOT 2 -#define DMX_IMMEDIATE_START 4 -#define DMX_KERNEL_CLIENT 0x8000 -}; - - -struct dmx_pes_filter_params -{ - __u16 pid; - dmx_input_t input; - dmx_output_t output; - dmx_pes_type_t pes_type; - __u32 flags; -}; - -typedef struct dmx_caps { - __u32 caps; - int num_decoders; -} dmx_caps_t; - -typedef enum { - DMX_SOURCE_FRONT0 = 0, - DMX_SOURCE_FRONT1, - DMX_SOURCE_FRONT2, - DMX_SOURCE_FRONT3, - DMX_SOURCE_DVR0 = 16, - DMX_SOURCE_DVR1, - DMX_SOURCE_DVR2, - DMX_SOURCE_DVR3 -} dmx_source_t; - -struct dmx_stc { - unsigned int num; /* input : which STC? 0..N */ - unsigned int base; /* output: divisor for stc to get 90 kHz clock */ - __u64 stc; /* output: stc in 'base'*90 kHz units */ -}; - - -#define DMX_START _IO('o', 41) -#define DMX_STOP _IO('o', 42) -#define DMX_SET_FILTER _IOW('o', 43, struct dmx_sct_filter_params) -#define DMX_SET_PES_FILTER _IOW('o', 44, struct dmx_pes_filter_params) -#define DMX_SET_BUFFER_SIZE _IO('o', 45) -#define DMX_GET_PES_PIDS _IOR('o', 47, __u16[5]) -#define DMX_GET_CAPS _IOR('o', 48, dmx_caps_t) -#define DMX_SET_SOURCE _IOW('o', 49, dmx_source_t) -#define DMX_GET_STC _IOWR('o', 50, struct dmx_stc) -#define DMX_ADD_PID _IOW('o', 51, __u16) -#define DMX_REMOVE_PID _IOW('o', 52, __u16) - -#endif /*_DVBDMX_H_*/ diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h deleted file mode 100644 index c12d452cb40d..000000000000 --- a/include/linux/dvb/frontend.h +++ /dev/null @@ -1,516 +0,0 @@ -/* - * frontend.h - * - * Copyright (C) 2000 Marcus Metzler <marcus@convergence.de> - * Ralph Metzler <ralph@convergence.de> - * Holger Waechtler <holger@convergence.de> - * Andre Draszik <ad@convergence.de> - * for convergence integrated media GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public License - * as published by the Free Software Foundation; either version 2.1 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - */ - -#ifndef _DVBFRONTEND_H_ -#define _DVBFRONTEND_H_ - -#include <linux/types.h> - -typedef enum fe_type { - FE_QPSK, - FE_QAM, - FE_OFDM, - FE_ATSC -} fe_type_t; - - -typedef enum fe_caps { - FE_IS_STUPID = 0, - FE_CAN_INVERSION_AUTO = 0x1, - FE_CAN_FEC_1_2 = 0x2, - FE_CAN_FEC_2_3 = 0x4, - FE_CAN_FEC_3_4 = 0x8, - FE_CAN_FEC_4_5 = 0x10, - FE_CAN_FEC_5_6 = 0x20, - FE_CAN_FEC_6_7 = 0x40, - FE_CAN_FEC_7_8 = 0x80, - FE_CAN_FEC_8_9 = 0x100, - FE_CAN_FEC_AUTO = 0x200, - FE_CAN_QPSK = 0x400, - FE_CAN_QAM_16 = 0x800, - FE_CAN_QAM_32 = 0x1000, - FE_CAN_QAM_64 = 0x2000, - FE_CAN_QAM_128 = 0x4000, - FE_CAN_QAM_256 = 0x8000, - FE_CAN_QAM_AUTO = 0x10000, - FE_CAN_TRANSMISSION_MODE_AUTO = 0x20000, - FE_CAN_BANDWIDTH_AUTO = 0x40000, - FE_CAN_GUARD_INTERVAL_AUTO = 0x80000, - FE_CAN_HIERARCHY_AUTO = 0x100000, - FE_CAN_8VSB = 0x200000, - FE_CAN_16VSB = 0x400000, - FE_HAS_EXTENDED_CAPS = 0x800000, /* We need more bitspace for newer APIs, indicate this. */ - FE_CAN_MULTISTREAM = 0x4000000, /* frontend supports multistream filtering */ - FE_CAN_TURBO_FEC = 0x8000000, /* frontend supports "turbo fec modulation" */ - FE_CAN_2G_MODULATION = 0x10000000, /* frontend supports "2nd generation modulation" (DVB-S2) */ - FE_NEEDS_BENDING = 0x20000000, /* not supported anymore, don't use (frontend requires frequency bending) */ - FE_CAN_RECOVER = 0x40000000, /* frontend can recover from a cable unplug automatically */ - FE_CAN_MUTE_TS = 0x80000000 /* frontend can stop spurious TS data output */ -} fe_caps_t; - - -struct dvb_frontend_info { - char name[128]; - fe_type_t type; /* DEPRECATED. Use DTV_ENUM_DELSYS instead */ - __u32 frequency_min; - __u32 frequency_max; - __u32 frequency_stepsize; - __u32 frequency_tolerance; - __u32 symbol_rate_min; - __u32 symbol_rate_max; - __u32 symbol_rate_tolerance; /* ppm */ - __u32 notifier_delay; /* DEPRECATED */ - fe_caps_t caps; -}; - - -/** - * Check out the DiSEqC bus spec available on http://www.eutelsat.org/ for - * the meaning of this struct... - */ -struct dvb_diseqc_master_cmd { - __u8 msg [6]; /* { framing, address, command, data [3] } */ - __u8 msg_len; /* valid values are 3...6 */ -}; - - -struct dvb_diseqc_slave_reply { - __u8 msg [4]; /* { framing, data [3] } */ - __u8 msg_len; /* valid values are 0...4, 0 means no msg */ - int timeout; /* return from ioctl after timeout ms with */ -}; /* errorcode when no message was received */ - - -typedef enum fe_sec_voltage { - SEC_VOLTAGE_13, - SEC_VOLTAGE_18, - SEC_VOLTAGE_OFF -} fe_sec_voltage_t; - - -typedef enum fe_sec_tone_mode { - SEC_TONE_ON, - SEC_TONE_OFF -} fe_sec_tone_mode_t; - - -typedef enum fe_sec_mini_cmd { - SEC_MINI_A, - SEC_MINI_B -} fe_sec_mini_cmd_t; - - -/** - * enum fe_status - enumerates the possible frontend status - * @FE_HAS_SIGNAL: found something above the noise level - * @FE_HAS_CARRIER: found a DVB signal - * @FE_HAS_VITERBI: FEC is stable - * @FE_HAS_SYNC: found sync bytes - * @FE_HAS_LOCK: everything's working - * @FE_TIMEDOUT: no lock within the last ~2 seconds - * @FE_REINIT: frontend was reinitialized, application is recommended - * to reset DiSEqC, tone and parameters - */ - -typedef enum fe_status { - FE_HAS_SIGNAL = 0x01, - FE_HAS_CARRIER = 0x02, - FE_HAS_VITERBI = 0x04, - FE_HAS_SYNC = 0x08, - FE_HAS_LOCK = 0x10, - FE_TIMEDOUT = 0x20, - FE_REINIT = 0x40, -} fe_status_t; - -typedef enum fe_spectral_inversion { - INVERSION_OFF, - INVERSION_ON, - INVERSION_AUTO -} fe_spectral_inversion_t; - - -typedef enum fe_code_rate { - FEC_NONE = 0, - FEC_1_2, - FEC_2_3, - FEC_3_4, - FEC_4_5, - FEC_5_6, - FEC_6_7, - FEC_7_8, - FEC_8_9, - FEC_AUTO, - FEC_3_5, - FEC_9_10, - FEC_2_5, -} fe_code_rate_t; - - -typedef enum fe_modulation { - QPSK, - QAM_16, - QAM_32, - QAM_64, - QAM_128, - QAM_256, - QAM_AUTO, - VSB_8, - VSB_16, - PSK_8, - APSK_16, - APSK_32, - DQPSK, - QAM_4_NR, -} fe_modulation_t; - -typedef enum fe_transmit_mode { - TRANSMISSION_MODE_2K, - TRANSMISSION_MODE_8K, - TRANSMISSION_MODE_AUTO, - TRANSMISSION_MODE_4K, - TRANSMISSION_MODE_1K, - TRANSMISSION_MODE_16K, - TRANSMISSION_MODE_32K, - TRANSMISSION_MODE_C1, - TRANSMISSION_MODE_C3780, -} fe_transmit_mode_t; - -#if defined(__DVB_CORE__) || !defined (__KERNEL__) -typedef enum fe_bandwidth { - BANDWIDTH_8_MHZ, - BANDWIDTH_7_MHZ, - BANDWIDTH_6_MHZ, - BANDWIDTH_AUTO, - BANDWIDTH_5_MHZ, - BANDWIDTH_10_MHZ, - BANDWIDTH_1_712_MHZ, -} fe_bandwidth_t; -#endif - -typedef enum fe_guard_interval { - GUARD_INTERVAL_1_32, - GUARD_INTERVAL_1_16, - GUARD_INTERVAL_1_8, - GUARD_INTERVAL_1_4, - GUARD_INTERVAL_AUTO, - GUARD_INTERVAL_1_128, - GUARD_INTERVAL_19_128, - GUARD_INTERVAL_19_256, - GUARD_INTERVAL_PN420, - GUARD_INTERVAL_PN595, - GUARD_INTERVAL_PN945, -} fe_guard_interval_t; - - -typedef enum fe_hierarchy { - HIERARCHY_NONE, - HIERARCHY_1, - HIERARCHY_2, - HIERARCHY_4, - HIERARCHY_AUTO -} fe_hierarchy_t; - -enum fe_interleaving { - INTERLEAVING_NONE, - INTERLEAVING_AUTO, - INTERLEAVING_240, - INTERLEAVING_720, -}; - -#if defined(__DVB_CORE__) || !defined (__KERNEL__) -struct dvb_qpsk_parameters { - __u32 symbol_rate; /* symbol rate in Symbols per second */ - fe_code_rate_t fec_inner; /* forward error correction (see above) */ -}; - -struct dvb_qam_parameters { - __u32 symbol_rate; /* symbol rate in Symbols per second */ - fe_code_rate_t fec_inner; /* forward error correction (see above) */ - fe_modulation_t modulation; /* modulation type (see above) */ -}; - -struct dvb_vsb_parameters { - fe_modulation_t modulation; /* modulation type (see above) */ -}; - -struct dvb_ofdm_parameters { - fe_bandwidth_t bandwidth; - fe_code_rate_t code_rate_HP; /* high priority stream code rate */ - fe_code_rate_t code_rate_LP; /* low priority stream code rate */ - fe_modulation_t constellation; /* modulation type (see above) */ - fe_transmit_mode_t transmission_mode; - fe_guard_interval_t guard_interval; - fe_hierarchy_t hierarchy_information; -}; - - -struct dvb_frontend_parameters { - __u32 frequency; /* (absolute) frequency in Hz for QAM/OFDM/ATSC */ - /* intermediate frequency in kHz for QPSK */ - fe_spectral_inversion_t inversion; - union { - struct dvb_qpsk_parameters qpsk; - struct dvb_qam_parameters qam; - struct dvb_ofdm_parameters ofdm; - struct dvb_vsb_parameters vsb; - } u; -}; - -struct dvb_frontend_event { - fe_status_t status; - struct dvb_frontend_parameters parameters; -}; -#endif - -/* S2API Commands */ -#define DTV_UNDEFINED 0 -#define DTV_TUNE 1 -#define DTV_CLEAR 2 -#define DTV_FREQUENCY 3 -#define DTV_MODULATION 4 -#define DTV_BANDWIDTH_HZ 5 -#define DTV_INVERSION 6 -#define DTV_DISEQC_MASTER 7 -#define DTV_SYMBOL_RATE 8 -#define DTV_INNER_FEC 9 -#define DTV_VOLTAGE 10 -#define DTV_TONE 11 -#define DTV_PILOT 12 -#define DTV_ROLLOFF 13 -#define DTV_DISEQC_SLAVE_REPLY 14 - -/* Basic enumeration set for querying unlimited capabilities */ -#define DTV_FE_CAPABILITY_COUNT 15 -#define DTV_FE_CAPABILITY 16 -#define DTV_DELIVERY_SYSTEM 17 - -/* ISDB-T and ISDB-Tsb */ -#define DTV_ISDBT_PARTIAL_RECEPTION 18 -#define DTV_ISDBT_SOUND_BROADCASTING 19 - -#define DTV_ISDBT_SB_SUBCHANNEL_ID 20 -#define DTV_ISDBT_SB_SEGMENT_IDX 21 -#define DTV_ISDBT_SB_SEGMENT_COUNT 22 - -#define DTV_ISDBT_LAYERA_FEC 23 -#define DTV_ISDBT_LAYERA_MODULATION 24 -#define DTV_ISDBT_LAYERA_SEGMENT_COUNT 25 -#define DTV_ISDBT_LAYERA_TIME_INTERLEAVING 26 - -#define DTV_ISDBT_LAYERB_FEC 27 -#define DTV_ISDBT_LAYERB_MODULATION 28 -#define DTV_ISDBT_LAYERB_SEGMENT_COUNT 29 -#define DTV_ISDBT_LAYERB_TIME_INTERLEAVING 30 - -#define DTV_ISDBT_LAYERC_FEC 31 -#define DTV_ISDBT_LAYERC_MODULATION 32 -#define DTV_ISDBT_LAYERC_SEGMENT_COUNT 33 -#define DTV_ISDBT_LAYERC_TIME_INTERLEAVING 34 - -#define DTV_API_VERSION 35 - -#define DTV_CODE_RATE_HP 36 -#define DTV_CODE_RATE_LP 37 -#define DTV_GUARD_INTERVAL 38 -#define DTV_TRANSMISSION_MODE 39 -#define DTV_HIERARCHY 40 - -#define DTV_ISDBT_LAYER_ENABLED 41 - -#define DTV_STREAM_ID 42 -#define DTV_ISDBS_TS_ID_LEGACY DTV_STREAM_ID -#define DTV_DVBT2_PLP_ID_LEGACY 43 - -#define DTV_ENUM_DELSYS 44 - -/* ATSC-MH */ -#define DTV_ATSCMH_FIC_VER 45 -#define DTV_ATSCMH_PARADE_ID 46 -#define DTV_ATSCMH_NOG 47 -#define DTV_ATSCMH_TNOG 48 -#define DTV_ATSCMH_SGN 49 -#define DTV_ATSCMH_PRC 50 -#define DTV_ATSCMH_RS_FRAME_MODE 51 -#define DTV_ATSCMH_RS_FRAME_ENSEMBLE 52 -#define DTV_ATSCMH_RS_CODE_MODE_PRI 53 -#define DTV_ATSCMH_RS_CODE_MODE_SEC 54 -#define DTV_ATSCMH_SCCC_BLOCK_MODE 55 -#define DTV_ATSCMH_SCCC_CODE_MODE_A 56 -#define DTV_ATSCMH_SCCC_CODE_MODE_B 57 -#define DTV_ATSCMH_SCCC_CODE_MODE_C 58 -#define DTV_ATSCMH_SCCC_CODE_MODE_D 59 - -#define DTV_INTERLEAVING 60 -#define DTV_LNA 61 - -#define DTV_MAX_COMMAND DTV_LNA - -typedef enum fe_pilot { - PILOT_ON, - PILOT_OFF, - PILOT_AUTO, -} fe_pilot_t; - -typedef enum fe_rolloff { - ROLLOFF_35, /* Implied value in DVB-S, default for DVB-S2 */ - ROLLOFF_20, - ROLLOFF_25, - ROLLOFF_AUTO, -} fe_rolloff_t; - -typedef enum fe_delivery_system { - SYS_UNDEFINED, - SYS_DVBC_ANNEX_A, - SYS_DVBC_ANNEX_B, - SYS_DVBT, - SYS_DSS, - SYS_DVBS, - SYS_DVBS2, - SYS_DVBH, - SYS_ISDBT, - SYS_ISDBS, - SYS_ISDBC, - SYS_ATSC, - SYS_ATSCMH, - SYS_DTMB, - SYS_CMMB, - SYS_DAB, - SYS_DVBT2, - SYS_TURBO, - SYS_DVBC_ANNEX_C, -} fe_delivery_system_t; - -/* backward compatibility */ -#define SYS_DVBC_ANNEX_AC SYS_DVBC_ANNEX_A -#define SYS_DMBTH SYS_DTMB /* DMB-TH is legacy name, use DTMB instead */ - -/* ATSC-MH */ - -enum atscmh_sccc_block_mode { - ATSCMH_SCCC_BLK_SEP = 0, - ATSCMH_SCCC_BLK_COMB = 1, - ATSCMH_SCCC_BLK_RES = 2, -}; - -enum atscmh_sccc_code_mode { - ATSCMH_SCCC_CODE_HLF = 0, - ATSCMH_SCCC_CODE_QTR = 1, - ATSCMH_SCCC_CODE_RES = 2, -}; - -enum atscmh_rs_frame_ensemble { - ATSCMH_RSFRAME_ENS_PRI = 0, - ATSCMH_RSFRAME_ENS_SEC = 1, -}; - -enum atscmh_rs_frame_mode { - ATSCMH_RSFRAME_PRI_ONLY = 0, - ATSCMH_RSFRAME_PRI_SEC = 1, - ATSCMH_RSFRAME_RES = 2, -}; - -enum atscmh_rs_code_mode { - ATSCMH_RSCODE_211_187 = 0, - ATSCMH_RSCODE_223_187 = 1, - ATSCMH_RSCODE_235_187 = 2, - ATSCMH_RSCODE_RES = 3, -}; - -#define NO_STREAM_ID_FILTER (~0U) -#define LNA_AUTO (~0U) - -struct dtv_cmds_h { - char *name; /* A display name for debugging purposes */ - - __u32 cmd; /* A unique ID */ - - /* Flags */ - __u32 set:1; /* Either a set or get property */ - __u32 buffer:1; /* Does this property use the buffer? */ - __u32 reserved:30; /* Align */ -}; - -struct dtv_property { - __u32 cmd; - __u32 reserved[3]; - union { - __u32 data; - struct { - __u8 data[32]; - __u32 len; - __u32 reserved1[3]; - void *reserved2; - } buffer; - } u; - int result; -} __attribute__ ((packed)); - -/* num of properties cannot exceed DTV_IOCTL_MAX_MSGS per ioctl */ -#define DTV_IOCTL_MAX_MSGS 64 - -struct dtv_properties { - __u32 num; - struct dtv_property *props; -}; - -#define FE_SET_PROPERTY _IOW('o', 82, struct dtv_properties) -#define FE_GET_PROPERTY _IOR('o', 83, struct dtv_properties) - - -/** - * When set, this flag will disable any zigzagging or other "normal" tuning - * behaviour. Additionally, there will be no automatic monitoring of the lock - * status, and hence no frontend events will be generated. If a frontend device - * is closed, this flag will be automatically turned off when the device is - * reopened read-write. - */ -#define FE_TUNE_MODE_ONESHOT 0x01 - - -#define FE_GET_INFO _IOR('o', 61, struct dvb_frontend_info) - -#define FE_DISEQC_RESET_OVERLOAD _IO('o', 62) -#define FE_DISEQC_SEND_MASTER_CMD _IOW('o', 63, struct dvb_diseqc_master_cmd) -#define FE_DISEQC_RECV_SLAVE_REPLY _IOR('o', 64, struct dvb_diseqc_slave_reply) -#define FE_DISEQC_SEND_BURST _IO('o', 65) /* fe_sec_mini_cmd_t */ - -#define FE_SET_TONE _IO('o', 66) /* fe_sec_tone_mode_t */ -#define FE_SET_VOLTAGE _IO('o', 67) /* fe_sec_voltage_t */ -#define FE_ENABLE_HIGH_LNB_VOLTAGE _IO('o', 68) /* int */ - -#define FE_READ_STATUS _IOR('o', 69, fe_status_t) -#define FE_READ_BER _IOR('o', 70, __u32) -#define FE_READ_SIGNAL_STRENGTH _IOR('o', 71, __u16) -#define FE_READ_SNR _IOR('o', 72, __u16) -#define FE_READ_UNCORRECTED_BLOCKS _IOR('o', 73, __u32) - -#define FE_SET_FRONTEND _IOW('o', 76, struct dvb_frontend_parameters) -#define FE_GET_FRONTEND _IOR('o', 77, struct dvb_frontend_parameters) -#define FE_SET_FRONTEND_TUNE_MODE _IO('o', 81) /* unsigned int */ -#define FE_GET_EVENT _IOR('o', 78, struct dvb_frontend_event) - -#define FE_DISHNETWORK_SEND_LEGACY_CMD _IO('o', 80) /* unsigned int */ - -#endif /*_DVBFRONTEND_H_*/ diff --git a/include/linux/dvb/net.h b/include/linux/dvb/net.h deleted file mode 100644 index f451e7eb0b0b..000000000000 --- a/include/linux/dvb/net.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * net.h - * - * Copyright (C) 2000 Marcus Metzler <marcus@convergence.de> - * & Ralph Metzler <ralph@convergence.de> - * for convergence integrated media GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public License - * as published by the Free Software Foundation; either version 2.1 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - */ - -#ifndef _DVBNET_H_ -#define _DVBNET_H_ - -#include <linux/types.h> - -struct dvb_net_if { - __u16 pid; - __u16 if_num; - __u8 feedtype; -#define DVB_NET_FEEDTYPE_MPE 0 /* multi protocol encapsulation */ -#define DVB_NET_FEEDTYPE_ULE 1 /* ultra lightweight encapsulation */ -}; - - -#define NET_ADD_IF _IOWR('o', 52, struct dvb_net_if) -#define NET_REMOVE_IF _IO('o', 53) -#define NET_GET_IF _IOWR('o', 54, struct dvb_net_if) - - -/* binary compatibility cruft: */ -struct __dvb_net_if_old { - __u16 pid; - __u16 if_num; -}; -#define __NET_ADD_IF_OLD _IOWR('o', 52, struct __dvb_net_if_old) -#define __NET_GET_IF_OLD _IOWR('o', 54, struct __dvb_net_if_old) - - -#endif /*_DVBNET_H_*/ diff --git a/include/linux/dvb/osd.h b/include/linux/dvb/osd.h deleted file mode 100644 index 880e68435832..000000000000 --- a/include/linux/dvb/osd.h +++ /dev/null @@ -1,144 +0,0 @@ -/* - * osd.h - * - * Copyright (C) 2001 Ralph Metzler <ralph@convergence.de> - * & Marcus Metzler <marcus@convergence.de> - * for convergence integrated media GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Lesser Public License - * as published by the Free Software Foundation; either version 2.1 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - */ - -#ifndef _DVBOSD_H_ -#define _DVBOSD_H_ - -#include <linux/compiler.h> - -typedef enum { - // All functions return -2 on "not open" - OSD_Close=1, // () - // Disables OSD and releases the buffers - // returns 0 on success - OSD_Open, // (x0,y0,x1,y1,BitPerPixel[2/4/8](color&0x0F),mix[0..15](color&0xF0)) - // Opens OSD with this size and bit depth - // returns 0 on success, -1 on DRAM allocation error, -2 on "already open" - OSD_Show, // () - // enables OSD mode - // returns 0 on success - OSD_Hide, // () - // disables OSD mode - // returns 0 on success - OSD_Clear, // () - // Sets all pixel to color 0 - // returns 0 on success - OSD_Fill, // (color) - // Sets all pixel to color <col> - // returns 0 on success - OSD_SetColor, // (color,R{x0},G{y0},B{x1},opacity{y1}) - // set palette entry <num> to <r,g,b>, <mix> and <trans> apply - // R,G,B: 0..255 - // R=Red, G=Green, B=Blue - // opacity=0: pixel opacity 0% (only video pixel shows) - // opacity=1..254: pixel opacity as specified in header - // opacity=255: pixel opacity 100% (only OSD pixel shows) - // returns 0 on success, -1 on error - OSD_SetPalette, // (firstcolor{color},lastcolor{x0},data) - // Set a number of entries in the palette - // sets the entries "firstcolor" through "lastcolor" from the array "data" - // data has 4 byte for each color: - // R,G,B, and a opacity value: 0->transparent, 1..254->mix, 255->pixel - OSD_SetTrans, // (transparency{color}) - // Sets transparency of mixed pixel (0..15) - // returns 0 on success - OSD_SetPixel, // (x0,y0,color) - // sets pixel <x>,<y> to color number <col> - // returns 0 on success, -1 on error - OSD_GetPixel, // (x0,y0) - // returns color number of pixel <x>,<y>, or -1 - OSD_SetRow, // (x0,y0,x1,data) - // fills pixels x0,y through x1,y with the content of data[] - // returns 0 on success, -1 on clipping all pixel (no pixel drawn) - OSD_SetBlock, // (x0,y0,x1,y1,increment{color},data) - // fills pixels x0,y0 through x1,y1 with the content of data[] - // inc contains the width of one line in the data block, - // inc<=0 uses blockwidth as linewidth - // returns 0 on success, -1 on clipping all pixel - OSD_FillRow, // (x0,y0,x1,color) - // fills pixels x0,y through x1,y with the color <col> - // returns 0 on success, -1 on clipping all pixel - OSD_FillBlock, // (x0,y0,x1,y1,color) - // fills pixels x0,y0 through x1,y1 with the color <col> - // returns 0 on success, -1 on clipping all pixel - OSD_Line, // (x0,y0,x1,y1,color) - // draw a line from x0,y0 to x1,y1 with the color <col> - // returns 0 on success - OSD_Query, // (x0,y0,x1,y1,xasp{color}}), yasp=11 - // fills parameters with the picture dimensions and the pixel aspect ratio - // returns 0 on success - OSD_Test, // () - // draws a test picture. for debugging purposes only - // returns 0 on success -// TODO: remove "test" in final version - OSD_Text, // (x0,y0,size,color,text) - OSD_SetWindow, // (x0) set window with number 0<x0<8 as current - OSD_MoveWindow, // move current window to (x0, y0) - OSD_OpenRaw, // Open other types of OSD windows -} OSD_Command; - -typedef struct osd_cmd_s { - OSD_Command cmd; - int x0; - int y0; - int x1; - int y1; - int color; - void __user *data; -} osd_cmd_t; - -/* OSD_OpenRaw: set 'color' to desired window type */ -typedef enum { - OSD_BITMAP1, /* 1 bit bitmap */ - OSD_BITMAP2, /* 2 bit bitmap */ - OSD_BITMAP4, /* 4 bit bitmap */ - OSD_BITMAP8, /* 8 bit bitmap */ - OSD_BITMAP1HR, /* 1 Bit bitmap half resolution */ - OSD_BITMAP2HR, /* 2 bit bitmap half resolution */ - OSD_BITMAP4HR, /* 4 bit bitmap half resolution */ - OSD_BITMAP8HR, /* 8 bit bitmap half resolution */ - OSD_YCRCB422, /* 4:2:2 YCRCB Graphic Display */ - OSD_YCRCB444, /* 4:4:4 YCRCB Graphic Display */ - OSD_YCRCB444HR, /* 4:4:4 YCRCB graphic half resolution */ - OSD_VIDEOTSIZE, /* True Size Normal MPEG Video Display */ - OSD_VIDEOHSIZE, /* MPEG Video Display Half Resolution */ - OSD_VIDEOQSIZE, /* MPEG Video Display Quarter Resolution */ - OSD_VIDEODSIZE, /* MPEG Video Display Double Resolution */ - OSD_VIDEOTHSIZE, /* True Size MPEG Video Display Half Resolution */ - OSD_VIDEOTQSIZE, /* True Size MPEG Video Display Quarter Resolution*/ - OSD_VIDEOTDSIZE, /* True Size MPEG Video Display Double Resolution */ - OSD_VIDEONSIZE, /* Full Size MPEG Video Display */ - OSD_CURSOR /* Cursor */ -} osd_raw_window_t; - -typedef struct osd_cap_s { - int cmd; -#define OSD_CAP_MEMSIZE 1 /* memory size */ - long val; -} osd_cap_t; - - -#define OSD_SEND_CMD _IOW('o', 160, osd_cmd_t) -#define OSD_GET_CAPABILITY _IOR('o', 161, osd_cap_t) - -#endif diff --git a/include/linux/dvb/version.h b/include/linux/dvb/version.h deleted file mode 100644 index 827cce7e33e3..000000000000 --- a/include/linux/dvb/version.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * version.h - * - * Copyright (C) 2000 Holger Waechtler <holger@convergence.de> - * for convergence integrated media GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public License - * as published by the Free Software Foundation; either version 2.1 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - */ - -#ifndef _DVBVERSION_H_ -#define _DVBVERSION_H_ - -#define DVB_API_VERSION 5 -#define DVB_API_VERSION_MINOR 9 - -#endif /*_DVBVERSION_H_*/ diff --git a/include/linux/dvb/video.h b/include/linux/dvb/video.h deleted file mode 100644 index 1d750c0fd86e..000000000000 --- a/include/linux/dvb/video.h +++ /dev/null @@ -1,276 +0,0 @@ -/* - * video.h - * - * Copyright (C) 2000 Marcus Metzler <marcus@convergence.de> - * & Ralph Metzler <ralph@convergence.de> - * for convergence integrated media GmbH - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public License - * as published by the Free Software Foundation; either version 2.1 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - */ - -#ifndef _DVBVIDEO_H_ -#define _DVBVIDEO_H_ - -#include <linux/types.h> -#ifdef __KERNEL__ -#include <linux/compiler.h> -#else -#include <stdint.h> -#include <time.h> -#endif - -typedef enum { - VIDEO_FORMAT_4_3, /* Select 4:3 format */ - VIDEO_FORMAT_16_9, /* Select 16:9 format. */ - VIDEO_FORMAT_221_1 /* 2.21:1 */ -} video_format_t; - - -typedef enum { - VIDEO_SYSTEM_PAL, - VIDEO_SYSTEM_NTSC, - VIDEO_SYSTEM_PALN, - VIDEO_SYSTEM_PALNc, - VIDEO_SYSTEM_PALM, - VIDEO_SYSTEM_NTSC60, - VIDEO_SYSTEM_PAL60, - VIDEO_SYSTEM_PALM60 -} video_system_t; - - -typedef enum { - VIDEO_PAN_SCAN, /* use pan and scan format */ - VIDEO_LETTER_BOX, /* use letterbox format */ - VIDEO_CENTER_CUT_OUT /* use center cut out format */ -} video_displayformat_t; - -typedef struct { - int w; - int h; - video_format_t aspect_ratio; -} video_size_t; - -typedef enum { - VIDEO_SOURCE_DEMUX, /* Select the demux as the main source */ - VIDEO_SOURCE_MEMORY /* If this source is selected, the stream - comes from the user through the write - system call */ -} video_stream_source_t; - - -typedef enum { - VIDEO_STOPPED, /* Video is stopped */ - VIDEO_PLAYING, /* Video is currently playing */ - VIDEO_FREEZED /* Video is freezed */ -} video_play_state_t; - - -/* Decoder commands */ -#define VIDEO_CMD_PLAY (0) -#define VIDEO_CMD_STOP (1) -#define VIDEO_CMD_FREEZE (2) -#define VIDEO_CMD_CONTINUE (3) - -/* Flags for VIDEO_CMD_FREEZE */ -#define VIDEO_CMD_FREEZE_TO_BLACK (1 << 0) - -/* Flags for VIDEO_CMD_STOP */ -#define VIDEO_CMD_STOP_TO_BLACK (1 << 0) -#define VIDEO_CMD_STOP_IMMEDIATELY (1 << 1) - -/* Play input formats: */ -/* The decoder has no special format requirements */ -#define VIDEO_PLAY_FMT_NONE (0) -/* The decoder requires full GOPs */ -#define VIDEO_PLAY_FMT_GOP (1) - -/* The structure must be zeroed before use by the application - This ensures it can be extended safely in the future. */ -struct video_command { - __u32 cmd; - __u32 flags; - union { - struct { - __u64 pts; - } stop; - - struct { - /* 0 or 1000 specifies normal speed, - 1 specifies forward single stepping, - -1 specifies backward single stepping, - >1: playback at speed/1000 of the normal speed, - <-1: reverse playback at (-speed/1000) of the normal speed. */ - __s32 speed; - __u32 format; - } play; - - struct { - __u32 data[16]; - } raw; - }; -}; - -/* FIELD_UNKNOWN can be used if the hardware does not know whether - the Vsync is for an odd, even or progressive (i.e. non-interlaced) - field. */ -#define VIDEO_VSYNC_FIELD_UNKNOWN (0) -#define VIDEO_VSYNC_FIELD_ODD (1) -#define VIDEO_VSYNC_FIELD_EVEN (2) -#define VIDEO_VSYNC_FIELD_PROGRESSIVE (3) - -struct video_event { - __s32 type; -#define VIDEO_EVENT_SIZE_CHANGED 1 -#define VIDEO_EVENT_FRAME_RATE_CHANGED 2 -#define VIDEO_EVENT_DECODER_STOPPED 3 -#define VIDEO_EVENT_VSYNC 4 - __kernel_time_t timestamp; - union { - video_size_t size; - unsigned int frame_rate; /* in frames per 1000sec */ - unsigned char vsync_field; /* unknown/odd/even/progressive */ - } u; -}; - - -struct video_status { - int video_blank; /* blank video on freeze? */ - video_play_state_t play_state; /* current state of playback */ - video_stream_source_t stream_source; /* current source (demux/memory) */ - video_format_t video_format; /* current aspect ratio of stream*/ - video_displayformat_t display_format;/* selected cropping mode */ -}; - - -struct video_still_picture { - char __user *iFrame; /* pointer to a single iframe in memory */ - __s32 size; -}; - - -typedef -struct video_highlight { - int active; /* 1=show highlight, 0=hide highlight */ - __u8 contrast1; /* 7- 4 Pattern pixel contrast */ - /* 3- 0 Background pixel contrast */ - __u8 contrast2; /* 7- 4 Emphasis pixel-2 contrast */ - /* 3- 0 Emphasis pixel-1 contrast */ - __u8 color1; /* 7- 4 Pattern pixel color */ - /* 3- 0 Background pixel color */ - __u8 color2; /* 7- 4 Emphasis pixel-2 color */ - /* 3- 0 Emphasis pixel-1 color */ - __u32 ypos; /* 23-22 auto action mode */ - /* 21-12 start y */ - /* 9- 0 end y */ - __u32 xpos; /* 23-22 button color number */ - /* 21-12 start x */ - /* 9- 0 end x */ -} video_highlight_t; - - -typedef struct video_spu { - int active; - int stream_id; -} video_spu_t; - - -typedef struct video_spu_palette { /* SPU Palette information */ - int length; - __u8 __user *palette; -} video_spu_palette_t; - - -typedef struct video_navi_pack { - int length; /* 0 ... 1024 */ - __u8 data[1024]; -} video_navi_pack_t; - - -typedef __u16 video_attributes_t; -/* bits: descr. */ -/* 15-14 Video compression mode (0=MPEG-1, 1=MPEG-2) */ -/* 13-12 TV system (0=525/60, 1=625/50) */ -/* 11-10 Aspect ratio (0=4:3, 3=16:9) */ -/* 9- 8 permitted display mode on 4:3 monitor (0=both, 1=only pan-sca */ -/* 7 line 21-1 data present in GOP (1=yes, 0=no) */ -/* 6 line 21-2 data present in GOP (1=yes, 0=no) */ -/* 5- 3 source resolution (0=720x480/576, 1=704x480/576, 2=352x480/57 */ -/* 2 source letterboxed (1=yes, 0=no) */ -/* 0 film/camera mode (0=camera, 1=film (625/50 only)) */ - - -/* bit definitions for capabilities: */ -/* can the hardware decode MPEG1 and/or MPEG2? */ -#define VIDEO_CAP_MPEG1 1 -#define VIDEO_CAP_MPEG2 2 -/* can you send a system and/or program stream to video device? - (you still have to open the video and the audio device but only - send the stream to the video device) */ -#define VIDEO_CAP_SYS 4 -#define VIDEO_CAP_PROG 8 -/* can the driver also handle SPU, NAVI and CSS encoded data? - (CSS API is not present yet) */ -#define VIDEO_CAP_SPU 16 -#define VIDEO_CAP_NAVI 32 -#define VIDEO_CAP_CSS 64 - - -#define VIDEO_STOP _IO('o', 21) -#define VIDEO_PLAY _IO('o', 22) -#define VIDEO_FREEZE _IO('o', 23) -#define VIDEO_CONTINUE _IO('o', 24) -#define VIDEO_SELECT_SOURCE _IO('o', 25) -#define VIDEO_SET_BLANK _IO('o', 26) -#define VIDEO_GET_STATUS _IOR('o', 27, struct video_status) -#define VIDEO_GET_EVENT _IOR('o', 28, struct video_event) -#define VIDEO_SET_DISPLAY_FORMAT _IO('o', 29) -#define VIDEO_STILLPICTURE _IOW('o', 30, struct video_still_picture) -#define VIDEO_FAST_FORWARD _IO('o', 31) -#define VIDEO_SLOWMOTION _IO('o', 32) -#define VIDEO_GET_CAPABILITIES _IOR('o', 33, unsigned int) -#define VIDEO_CLEAR_BUFFER _IO('o', 34) -#define VIDEO_SET_ID _IO('o', 35) -#define VIDEO_SET_STREAMTYPE _IO('o', 36) -#define VIDEO_SET_FORMAT _IO('o', 37) -#define VIDEO_SET_SYSTEM _IO('o', 38) -#define VIDEO_SET_HIGHLIGHT _IOW('o', 39, video_highlight_t) -#define VIDEO_SET_SPU _IOW('o', 50, video_spu_t) -#define VIDEO_SET_SPU_PALETTE _IOW('o', 51, video_spu_palette_t) -#define VIDEO_GET_NAVI _IOR('o', 52, video_navi_pack_t) -#define VIDEO_SET_ATTRIBUTES _IO('o', 53) -#define VIDEO_GET_SIZE _IOR('o', 55, video_size_t) -#define VIDEO_GET_FRAME_RATE _IOR('o', 56, unsigned int) - -/** - * VIDEO_GET_PTS - * - * Read the 33 bit presentation time stamp as defined - * in ITU T-REC-H.222.0 / ISO/IEC 13818-1. - * - * The PTS should belong to the currently played - * frame if possible, but may also be a value close to it - * like the PTS of the last decoded frame or the last PTS - * extracted by the PES parser. - */ -#define VIDEO_GET_PTS _IOR('o', 57, __u64) - -/* Read the number of displayed frames since the decoder was started */ -#define VIDEO_GET_FRAME_COUNT _IOR('o', 58, __u64) - -#define VIDEO_COMMAND _IOWR('o', 59, struct video_command) -#define VIDEO_TRY_COMMAND _IOWR('o', 60, struct video_command) - -#endif /*_DVBVIDEO_H_*/ diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h index c18257b0fa72..6dd4787a798a 100644 --- a/include/linux/dynamic_debug.h +++ b/include/linux/dynamic_debug.h @@ -61,7 +61,7 @@ int __dynamic_netdev_dbg(struct _ddebug *descriptor, const char *fmt, ...); #define DEFINE_DYNAMIC_DEBUG_METADATA(name, fmt) \ - static struct _ddebug __used __aligned(8) \ + static struct _ddebug __aligned(8) \ __attribute__((section("__verbose"))) name = { \ .modname = KBUILD_MODNAME, \ .function = __func__, \ diff --git a/include/linux/earlycpio.h b/include/linux/earlycpio.h new file mode 100644 index 000000000000..111f46d83d00 --- /dev/null +++ b/include/linux/earlycpio.h @@ -0,0 +1,17 @@ +#ifndef _LINUX_EARLYCPIO_H +#define _LINUX_EARLYCPIO_H + +#include <linux/types.h> + +#define MAX_CPIO_FILE_NAME 18 + +struct cpio_data { + void *data; + size_t size; + char name[MAX_CPIO_FILE_NAME]; +}; + +struct cpio_data find_cpio_data(const char *path, void *data, size_t len, + long *offset); + +#endif /* _LINUX_EARLYCPIO_H */ diff --git a/include/linux/edac.h b/include/linux/edac.h index bab9f8473dc1..1b8c02b36f76 100644 --- a/include/linux/edac.h +++ b/include/linux/edac.h @@ -533,6 +533,7 @@ struct csrow_info { u32 ue_count; /* Uncorrectable Errors for this csrow */ u32 ce_count; /* Correctable Errors for this csrow */ + u32 nr_pages; /* combined pages count of all channels */ struct mem_ctl_info *mci; /* the parent */ @@ -667,6 +668,8 @@ struct mem_ctl_info { u32 fake_inject_ue; u16 fake_inject_count; #endif + __u8 csbased : 1, /* csrow-based memory controller */ + __resv : 7; }; #endif diff --git a/include/linux/efi.h b/include/linux/efi.h index 8670eb1eb8cd..8b84916dc671 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -29,7 +29,12 @@ #define EFI_UNSUPPORTED ( 3 | (1UL << (BITS_PER_LONG-1))) #define EFI_BAD_BUFFER_SIZE ( 4 | (1UL << (BITS_PER_LONG-1))) #define EFI_BUFFER_TOO_SMALL ( 5 | (1UL << (BITS_PER_LONG-1))) +#define EFI_NOT_READY ( 6 | (1UL << (BITS_PER_LONG-1))) +#define EFI_DEVICE_ERROR ( 7 | (1UL << (BITS_PER_LONG-1))) +#define EFI_WRITE_PROTECTED ( 8 | (1UL << (BITS_PER_LONG-1))) +#define EFI_OUT_OF_RESOURCES ( 9 | (1UL << (BITS_PER_LONG-1))) #define EFI_NOT_FOUND (14 | (1UL << (BITS_PER_LONG-1))) +#define EFI_SECURITY_VIOLATION (26 | (1UL << (BITS_PER_LONG-1))) typedef unsigned long efi_status_t; typedef u8 efi_bool_t; @@ -196,6 +201,77 @@ typedef struct { void *create_event_ex; } efi_boot_services_t; +typedef enum { + EfiPciIoWidthUint8, + EfiPciIoWidthUint16, + EfiPciIoWidthUint32, + EfiPciIoWidthUint64, + EfiPciIoWidthFifoUint8, + EfiPciIoWidthFifoUint16, + EfiPciIoWidthFifoUint32, + EfiPciIoWidthFifoUint64, + EfiPciIoWidthFillUint8, + EfiPciIoWidthFillUint16, + EfiPciIoWidthFillUint32, + EfiPciIoWidthFillUint64, + EfiPciIoWidthMaximum +} EFI_PCI_IO_PROTOCOL_WIDTH; + +typedef enum { + EfiPciIoAttributeOperationGet, + EfiPciIoAttributeOperationSet, + EfiPciIoAttributeOperationEnable, + EfiPciIoAttributeOperationDisable, + EfiPciIoAttributeOperationSupported, + EfiPciIoAttributeOperationMaximum +} EFI_PCI_IO_PROTOCOL_ATTRIBUTE_OPERATION; + + +typedef struct { + void *read; + void *write; +} efi_pci_io_protocol_access_t; + +typedef struct { + void *poll_mem; + void *poll_io; + efi_pci_io_protocol_access_t mem; + efi_pci_io_protocol_access_t io; + efi_pci_io_protocol_access_t pci; + void *copy_mem; + void *map; + void *unmap; + void *allocate_buffer; + void *free_buffer; + void *flush; + void *get_location; + void *attributes; + void *get_bar_attributes; + void *set_bar_attributes; + uint64_t romsize; + void *romimage; +} efi_pci_io_protocol; + +#define EFI_PCI_IO_ATTRIBUTE_ISA_MOTHERBOARD_IO 0x0001 +#define EFI_PCI_IO_ATTRIBUTE_ISA_IO 0x0002 +#define EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO 0x0004 +#define EFI_PCI_IO_ATTRIBUTE_VGA_MEMORY 0x0008 +#define EFI_PCI_IO_ATTRIBUTE_VGA_IO 0x0010 +#define EFI_PCI_IO_ATTRIBUTE_IDE_PRIMARY_IO 0x0020 +#define EFI_PCI_IO_ATTRIBUTE_IDE_SECONDARY_IO 0x0040 +#define EFI_PCI_IO_ATTRIBUTE_MEMORY_WRITE_COMBINE 0x0080 +#define EFI_PCI_IO_ATTRIBUTE_IO 0x0100 +#define EFI_PCI_IO_ATTRIBUTE_MEMORY 0x0200 +#define EFI_PCI_IO_ATTRIBUTE_BUS_MASTER 0x0400 +#define EFI_PCI_IO_ATTRIBUTE_MEMORY_CACHED 0x0800 +#define EFI_PCI_IO_ATTRIBUTE_MEMORY_DISABLE 0x1000 +#define EFI_PCI_IO_ATTRIBUTE_EMBEDDED_DEVICE 0x2000 +#define EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM 0x4000 +#define EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE 0x8000 +#define EFI_PCI_IO_ATTRIBUTE_ISA_IO_16 0x10000 +#define EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO_16 0x20000 +#define EFI_PCI_IO_ATTRIBUTE_VGA_IO_16 0x40000 + /* * Types and defines for EFI ResetSystem */ @@ -643,6 +719,7 @@ struct efivar_operations { efi_get_variable_t *get_variable; efi_get_next_variable_t *get_next_variable; efi_set_variable_t *set_variable; + efi_query_variable_info_t *query_variable_info; }; struct efivars { @@ -657,6 +734,7 @@ struct efivars { spinlock_t lock; struct list_head list; struct kset *kset; + struct kobject *kobject; struct bin_attribute *new_var, *del_var; const struct efivar_operations *ops; struct efivar_entry *walk_entry; diff --git a/include/linux/elf-fdpic.h b/include/linux/elf-fdpic.h new file mode 100644 index 000000000000..386440317b0c --- /dev/null +++ b/include/linux/elf-fdpic.h @@ -0,0 +1,51 @@ +/* FDPIC ELF load map + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _LINUX_ELF_FDPIC_H +#define _LINUX_ELF_FDPIC_H + +#include <uapi/linux/elf-fdpic.h> + +/* + * binfmt binary parameters structure + */ +struct elf_fdpic_params { + struct elfhdr hdr; /* ref copy of ELF header */ + struct elf_phdr *phdrs; /* ref copy of PT_PHDR table */ + struct elf32_fdpic_loadmap *loadmap; /* loadmap to be passed to userspace */ + unsigned long elfhdr_addr; /* mapped ELF header user address */ + unsigned long ph_addr; /* mapped PT_PHDR user address */ + unsigned long map_addr; /* mapped loadmap user address */ + unsigned long entry_addr; /* mapped entry user address */ + unsigned long stack_size; /* stack size requested (PT_GNU_STACK) */ + unsigned long dynamic_addr; /* mapped PT_DYNAMIC user address */ + unsigned long load_addr; /* user address at which to map binary */ + unsigned long flags; +#define ELF_FDPIC_FLAG_ARRANGEMENT 0x0000000f /* PT_LOAD arrangement flags */ +#define ELF_FDPIC_FLAG_INDEPENDENT 0x00000000 /* PT_LOADs can be put anywhere */ +#define ELF_FDPIC_FLAG_HONOURVADDR 0x00000001 /* PT_LOAD.vaddr must be honoured */ +#define ELF_FDPIC_FLAG_CONSTDISP 0x00000002 /* PT_LOADs require constant + * displacement */ +#define ELF_FDPIC_FLAG_CONTIGUOUS 0x00000003 /* PT_LOADs should be contiguous */ +#define ELF_FDPIC_FLAG_EXEC_STACK 0x00000010 /* T if stack to be executable */ +#define ELF_FDPIC_FLAG_NOEXEC_STACK 0x00000020 /* T if stack not to be executable */ +#define ELF_FDPIC_FLAG_EXECUTABLE 0x00000040 /* T if this object is the executable */ +#define ELF_FDPIC_FLAG_PRESENT 0x80000000 /* T if this object is present */ +}; + +#ifdef CONFIG_MMU +extern void elf_fdpic_arch_lay_out_mm(struct elf_fdpic_params *exec_params, + struct elf_fdpic_params *interp_params, + unsigned long *start_stack, + unsigned long *start_brk); +#endif + +#endif /* _LINUX_ELF_FDPIC_H */ diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h index b006ba0a9f42..243eea1e33d8 100644 --- a/include/linux/etherdevice.h +++ b/include/linux/etherdevice.h @@ -51,6 +51,26 @@ extern struct net_device *alloc_etherdev_mqs(int sizeof_priv, unsigned int txqs, #define alloc_etherdev(sizeof_priv) alloc_etherdev_mq(sizeof_priv, 1) #define alloc_etherdev_mq(sizeof_priv, count) alloc_etherdev_mqs(sizeof_priv, count, count) +/* Reserved Ethernet Addresses per IEEE 802.1Q */ +static const u8 eth_reserved_addr_base[ETH_ALEN] __aligned(2) = +{ 0x01, 0x80, 0xc2, 0x00, 0x00, 0x00 }; + +/** + * is_link_local_ether_addr - Determine if given Ethernet address is link-local + * @addr: Pointer to a six-byte array containing the Ethernet address + * + * Return true if address is link local reserved addr (01:80:c2:00:00:0X) per + * IEEE 802.1Q 8.6.3 Frame filtering. + */ +static inline bool is_link_local_ether_addr(const u8 *addr) +{ + __be16 *a = (__be16 *)addr; + static const __be16 *b = (const __be16 *)eth_reserved_addr_base; + static const __be16 m = cpu_to_be16(0xfff0); + + return ((a[0] ^ b[0]) | (a[1] ^ b[1]) | ((a[2] ^ b[2]) & m)) == 0; +} + /** * is_zero_ether_addr - Determine if give Ethernet address is all zeros. * @addr: Pointer to a six-byte array containing the Ethernet address diff --git a/include/linux/exportfs.h b/include/linux/exportfs.h index 12291a7ee275..c7e6b6392ab8 100644 --- a/include/linux/exportfs.h +++ b/include/linux/exportfs.h @@ -177,6 +177,8 @@ struct export_operations { int (*commit_metadata)(struct inode *inode); }; +extern int exportfs_encode_inode_fh(struct inode *inode, struct fid *fid, + int *max_len, struct inode *parent); extern int exportfs_encode_fh(struct dentry *dentry, struct fid *fid, int *max_len, int connectable); extern struct dentry *exportfs_decode_fh(struct vfsmount *mnt, struct fid *fid, diff --git a/include/linux/extcon.h b/include/linux/extcon.h index 7443a560c9d0..fcb51c88319f 100644 --- a/include/linux/extcon.h +++ b/include/linux/extcon.h @@ -23,7 +23,9 @@ #ifndef __LINUX_EXTCON_H__ #define __LINUX_EXTCON_H__ +#include <linux/device.h> #include <linux/notifier.h> +#include <linux/sysfs.h> #define SUPPORTED_CABLE_MAX 32 #define CABLE_NAME_MAX 30 @@ -68,18 +70,18 @@ enum extcon_cable_name { EXTCON_VIDEO_OUT, EXTCON_MECHANICAL, }; -extern const char *extcon_cable_name[]; +extern const char extcon_cable_name[][CABLE_NAME_MAX + 1]; struct extcon_cable; /** * struct extcon_dev - An extcon device represents one external connector. - * @name The name of this extcon device. Parent device name is used + * @name: The name of this extcon device. Parent device name is used * if NULL. - * @supported_cable Array of supported cable names ending with NULL. + * @supported_cable: Array of supported cable names ending with NULL. * If supported_cable is NULL, cable name related APIs * are disabled. - * @mutually_exclusive Array of mutually exclusive set of cables that cannot + * @mutually_exclusive: Array of mutually exclusive set of cables that cannot * be attached simultaneously. The array should be * ending with NULL or be NULL (no mutually exclusive * cables). For example, if it is { 0x7, 0x30, 0}, then, @@ -87,21 +89,21 @@ struct extcon_cable; * be attached simulataneously. {0x7, 0} is equivalent to * {0x3, 0x6, 0x5, 0}. If it is {0xFFFFFFFF, 0}, there * can be no simultaneous connections. - * @print_name An optional callback to override the method to print the + * @print_name: An optional callback to override the method to print the * name of the extcon device. - * @print_state An optional callback to override the method to print the + * @print_state: An optional callback to override the method to print the * status of the extcon device. - * @dev Device of this extcon. Do not provide at register-time. - * @state Attach/detach state of this extcon. Do not provide at + * @dev: Device of this extcon. Do not provide at register-time. + * @state: Attach/detach state of this extcon. Do not provide at * register-time - * @nh Notifier for the state change events from this extcon - * @entry To support list of extcon devices so that users can search + * @nh: Notifier for the state change events from this extcon + * @entry: To support list of extcon devices so that users can search * for extcon devices based on the extcon name. - * @lock - * @max_supported Internal value to store the number of cables. - * @extcon_dev_type Device_type struct to provide attribute_groups + * @lock: + * @max_supported: Internal value to store the number of cables. + * @extcon_dev_type: Device_type struct to provide attribute_groups * customized for each extcon device. - * @cables Sysfs subdirectories. Each represents one cable. + * @cables: Sysfs subdirectories. Each represents one cable. * * In most cases, users only need to provide "User initializing data" of * this struct when registering an extcon. In some exceptional cases, @@ -137,12 +139,12 @@ struct extcon_dev { /** * struct extcon_cable - An internal data for each cable of extcon device. - * @edev The extcon device - * @cable_index Index of this cable in the edev - * @attr_g Attribute group for the cable - * @attr_name "name" sysfs entry - * @attr_state "state" sysfs entry - * @attrs Array pointing to attr_name and attr_state for attr_g + * @edev: The extcon device + * @cable_index: Index of this cable in the edev + * @attr_g: Attribute group for the cable + * @attr_name: "name" sysfs entry + * @attr_state: "state" sysfs entry + * @attrs: Array pointing to attr_name and attr_state for attr_g */ struct extcon_cable { struct extcon_dev *edev; @@ -158,11 +160,11 @@ struct extcon_cable { /** * struct extcon_specific_cable_nb - An internal data for * extcon_register_interest(). - * @internal_nb a notifier block bridging extcon notifier and cable notifier. - * @user_nb user provided notifier block for events from a specific cable. - * @cable_index the target cable. - * @edev the target extcon device. - * @previous_value the saved previous event value. + * @internal_nb: a notifier block bridging extcon notifier and cable notifier. + * @user_nb: user provided notifier block for events from a specific cable. + * @cable_index: the target cable. + * @edev: the target extcon device. + * @previous_value: the saved previous event value. */ struct extcon_specific_cable_nb { struct notifier_block internal_nb; diff --git a/include/linux/fdtable.h b/include/linux/fdtable.h index 45052aa814c8..fb7dacae0522 100644 --- a/include/linux/fdtable.h +++ b/include/linux/fdtable.h @@ -95,7 +95,6 @@ struct task_struct; struct files_struct *get_files_struct(struct task_struct *); void put_files_struct(struct files_struct *fs); void reset_files_struct(struct files_struct *); -void daemonize_descriptors(void); int unshare_files(struct files_struct **); struct files_struct *dup_fd(struct files_struct *, int *); void do_close_on_exec(struct files_struct *); diff --git a/include/linux/filter.h b/include/linux/filter.h index 24d251f3bab0..c45eabc135e1 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -45,6 +45,7 @@ extern void sk_unattached_filter_destroy(struct sk_filter *fp); extern int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk); extern int sk_detach_filter(struct sock *sk); extern int sk_chk_filter(struct sock_filter *filter, unsigned int flen); +extern int sk_get_filter(struct sock *sk, struct sock_filter __user *filter, unsigned len); #ifdef CONFIG_BPF_JIT extern void bpf_jit_compile(struct sk_filter *fp); @@ -123,6 +124,8 @@ enum { BPF_S_ANC_CPU, BPF_S_ANC_ALU_XOR_X, BPF_S_ANC_SECCOMP_LD_W, + BPF_S_ANC_VLAN_TAG, + BPF_S_ANC_VLAN_TAG_PRESENT, }; #endif /* __LINUX_FILTER_H__ */ diff --git a/include/linux/freezer.h b/include/linux/freezer.h index d09af4b67cf1..e4238ceaa4d6 100644 --- a/include/linux/freezer.h +++ b/include/linux/freezer.h @@ -75,35 +75,68 @@ static inline bool cgroup_freezing(struct task_struct *task) */ -/* Tell the freezer not to count the current task as freezable. */ +/** + * freezer_do_not_count - tell freezer to ignore %current + * + * Tell freezers to ignore the current task when determining whether the + * target frozen state is reached. IOW, the current task will be + * considered frozen enough by freezers. + * + * The caller shouldn't do anything which isn't allowed for a frozen task + * until freezer_cont() is called. Usually, freezer[_do_not]_count() pair + * wrap a scheduling operation and nothing much else. + */ static inline void freezer_do_not_count(void) { current->flags |= PF_FREEZER_SKIP; } -/* - * Tell the freezer to count the current task as freezable again and try to - * freeze it. +/** + * freezer_count - tell freezer to stop ignoring %current + * + * Undo freezer_do_not_count(). It tells freezers that %current should be + * considered again and tries to freeze if freezing condition is already in + * effect. */ static inline void freezer_count(void) { current->flags &= ~PF_FREEZER_SKIP; + /* + * If freezing is in progress, the following paired with smp_mb() + * in freezer_should_skip() ensures that either we see %true + * freezing() or freezer_should_skip() sees !PF_FREEZER_SKIP. + */ + smp_mb(); try_to_freeze(); } -/* - * Check if the task should be counted as freezable by the freezer +/** + * freezer_should_skip - whether to skip a task when determining frozen + * state is reached + * @p: task in quesion + * + * This function is used by freezers after establishing %true freezing() to + * test whether a task should be skipped when determining the target frozen + * state is reached. IOW, if this function returns %true, @p is considered + * frozen enough. */ -static inline int freezer_should_skip(struct task_struct *p) +static inline bool freezer_should_skip(struct task_struct *p) { - return !!(p->flags & PF_FREEZER_SKIP); + /* + * The following smp_mb() paired with the one in freezer_count() + * ensures that either freezer_count() sees %true freezing() or we + * see cleared %PF_FREEZER_SKIP and return %false. This makes it + * impossible for a task to slip frozen state testing after + * clearing %PF_FREEZER_SKIP. + */ + smp_mb(); + return p->flags & PF_FREEZER_SKIP; } /* - * These macros are intended to be used whenever you want allow a task that's - * sleeping in TASK_UNINTERRUPTIBLE or TASK_KILLABLE state to be frozen. Note - * that neither return any clear indication of whether a freeze event happened - * while in this function. + * These macros are intended to be used whenever you want allow a sleeping + * task to be frozen. Note that neither return any clear indication of + * whether a freeze event happened while in this function. */ /* Like schedule(), but should not block the freezer. */ @@ -177,6 +210,7 @@ static inline int freeze_kernel_threads(void) { return -ENOSYS; } static inline void thaw_processes(void) {} static inline void thaw_kernel_threads(void) {} +static inline bool try_to_freeze_nowarn(void) { return false; } static inline bool try_to_freeze(void) { return false; } static inline void freezer_do_not_count(void) {} diff --git a/include/linux/fs.h b/include/linux/fs.h index 001c7cff2d48..a823d4be38e7 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -44,6 +44,7 @@ struct vm_area_struct; struct vfsmount; struct cred; struct swap_info_struct; +struct seq_file; extern void __init inode_init(void); extern void __init inode_init_early(void); @@ -64,6 +65,73 @@ typedef void (dio_iodone_t)(struct kiocb *iocb, loff_t offset, ssize_t bytes, void *private, int ret, bool is_async); +#define MAY_EXEC 0x00000001 +#define MAY_WRITE 0x00000002 +#define MAY_READ 0x00000004 +#define MAY_APPEND 0x00000008 +#define MAY_ACCESS 0x00000010 +#define MAY_OPEN 0x00000020 +#define MAY_CHDIR 0x00000040 +/* called from RCU mode, don't block */ +#define MAY_NOT_BLOCK 0x00000080 + +/* + * flags in file.f_mode. Note that FMODE_READ and FMODE_WRITE must correspond + * to O_WRONLY and O_RDWR via the strange trick in __dentry_open() + */ + +/* file is open for reading */ +#define FMODE_READ ((__force fmode_t)0x1) +/* file is open for writing */ +#define FMODE_WRITE ((__force fmode_t)0x2) +/* file is seekable */ +#define FMODE_LSEEK ((__force fmode_t)0x4) +/* file can be accessed using pread */ +#define FMODE_PREAD ((__force fmode_t)0x8) +/* file can be accessed using pwrite */ +#define FMODE_PWRITE ((__force fmode_t)0x10) +/* File is opened for execution with sys_execve / sys_uselib */ +#define FMODE_EXEC ((__force fmode_t)0x20) +/* File is opened with O_NDELAY (only set for block devices) */ +#define FMODE_NDELAY ((__force fmode_t)0x40) +/* File is opened with O_EXCL (only set for block devices) */ +#define FMODE_EXCL ((__force fmode_t)0x80) +/* File is opened using open(.., 3, ..) and is writeable only for ioctls + (specialy hack for floppy.c) */ +#define FMODE_WRITE_IOCTL ((__force fmode_t)0x100) +/* 32bit hashes as llseek() offset (for directories) */ +#define FMODE_32BITHASH ((__force fmode_t)0x200) +/* 64bit hashes as llseek() offset (for directories) */ +#define FMODE_64BITHASH ((__force fmode_t)0x400) + +/* + * Don't update ctime and mtime. + * + * Currently a special hack for the XFS open_by_handle ioctl, but we'll + * hopefully graduate it to a proper O_CMTIME flag supported by open(2) soon. + */ +#define FMODE_NOCMTIME ((__force fmode_t)0x800) + +/* Expect random access pattern */ +#define FMODE_RANDOM ((__force fmode_t)0x1000) + +/* File is huge (eg. /dev/kmem): treat loff_t as unsigned */ +#define FMODE_UNSIGNED_OFFSET ((__force fmode_t)0x2000) + +/* File is opened with O_PATH; almost nothing can be done with it */ +#define FMODE_PATH ((__force fmode_t)0x4000) + +/* File was opened by fanotify and shouldn't generate fanotify events */ +#define FMODE_NONOTIFY ((__force fmode_t)0x1000000) + +/* + * Flag for rw_copy_check_uvector and compat_rw_copy_check_uvector + * that indicates that they should check the contents of the iovec are + * valid, but not check the memory that the iovec elements + * points too. + */ +#define CHECK_IOVEC_ONLY -1 + /* * The below are the various read and write types that we support. Some of * them include behavioral modifiers that send information down to the @@ -351,7 +419,7 @@ struct address_space { struct backing_dev_info *backing_dev_info; /* device readahead, etc */ spinlock_t private_lock; /* for use by the address_space */ struct list_head private_list; /* ditto */ - struct address_space *assoc_mapping; /* ditto */ + void *private_data; /* ditto */ } __attribute__((aligned(sizeof(long)))); /* * On most architectures that alignment is already the case; but @@ -395,8 +463,6 @@ struct block_device { int bd_fsfreeze_count; /* Mutex for freeze */ struct mutex bd_fsfreeze_mutex; - /* A semaphore that prevents I/O while block size is being changed */ - struct percpu_rw_semaphore bd_block_size_semaphore; }; /* @@ -1478,6 +1544,7 @@ struct file_operations { int (*setlease)(struct file *, long, struct file_lock **); long (*fallocate)(struct file *file, int mode, loff_t offset, loff_t len); + int (*show_fdinfo)(struct seq_file *m, struct file *f); }; struct inode_operations { @@ -1513,8 +1580,6 @@ struct inode_operations { umode_t create_mode, int *opened); } ____cacheline_aligned; -struct seq_file; - ssize_t rw_copy_check_uvector(int type, const struct iovec __user * uvector, unsigned long nr_segs, unsigned long fast_segs, struct iovec *fast_pointer, @@ -1557,6 +1622,60 @@ struct super_operations { }; /* + * Inode flags - they have no relation to superblock flags now + */ +#define S_SYNC 1 /* Writes are synced at once */ +#define S_NOATIME 2 /* Do not update access times */ +#define S_APPEND 4 /* Append-only file */ +#define S_IMMUTABLE 8 /* Immutable file */ +#define S_DEAD 16 /* removed, but still open directory */ +#define S_NOQUOTA 32 /* Inode is not counted to quota */ +#define S_DIRSYNC 64 /* Directory modifications are synchronous */ +#define S_NOCMTIME 128 /* Do not update file c/mtime */ +#define S_SWAPFILE 256 /* Do not truncate: swapon got its bmaps */ +#define S_PRIVATE 512 /* Inode is fs-internal */ +#define S_IMA 1024 /* Inode has an associated IMA struct */ +#define S_AUTOMOUNT 2048 /* Automount/referral quasi-directory */ +#define S_NOSEC 4096 /* no suid or xattr security attributes */ + +/* + * Note that nosuid etc flags are inode-specific: setting some file-system + * flags just means all the inodes inherit those flags by default. It might be + * possible to override it selectively if you really wanted to with some + * ioctl() that is not currently implemented. + * + * Exception: MS_RDONLY is always applied to the entire file system. + * + * Unfortunately, it is possible to change a filesystems flags with it mounted + * with files in use. This means that all of the inodes will not have their + * i_flags updated. Hence, i_flags no longer inherit the superblock mount + * flags, so these have to be checked separately. -- rmk@arm.uk.linux.org + */ +#define __IS_FLG(inode, flg) ((inode)->i_sb->s_flags & (flg)) + +#define IS_RDONLY(inode) ((inode)->i_sb->s_flags & MS_RDONLY) +#define IS_SYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS) || \ + ((inode)->i_flags & S_SYNC)) +#define IS_DIRSYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS|MS_DIRSYNC) || \ + ((inode)->i_flags & (S_SYNC|S_DIRSYNC))) +#define IS_MANDLOCK(inode) __IS_FLG(inode, MS_MANDLOCK) +#define IS_NOATIME(inode) __IS_FLG(inode, MS_RDONLY|MS_NOATIME) +#define IS_I_VERSION(inode) __IS_FLG(inode, MS_I_VERSION) + +#define IS_NOQUOTA(inode) ((inode)->i_flags & S_NOQUOTA) +#define IS_APPEND(inode) ((inode)->i_flags & S_APPEND) +#define IS_IMMUTABLE(inode) ((inode)->i_flags & S_IMMUTABLE) +#define IS_POSIXACL(inode) __IS_FLG(inode, MS_POSIXACL) + +#define IS_DEADDIR(inode) ((inode)->i_flags & S_DEAD) +#define IS_NOCMTIME(inode) ((inode)->i_flags & S_NOCMTIME) +#define IS_SWAPFILE(inode) ((inode)->i_flags & S_SWAPFILE) +#define IS_PRIVATE(inode) ((inode)->i_flags & S_PRIVATE) +#define IS_IMA(inode) ((inode)->i_flags & S_IMA) +#define IS_AUTOMOUNT(inode) ((inode)->i_flags & S_AUTOMOUNT) +#define IS_NOSEC(inode) ((inode)->i_flags & S_NOSEC) + +/* * Inode state bits. Protected by inode->i_lock * * Three bits determine the dirty state of the inode, I_DIRTY_SYNC, @@ -1688,6 +1807,13 @@ int sync_inode_metadata(struct inode *inode, int wait); struct file_system_type { const char *name; int fs_flags; +#define FS_REQUIRES_DEV 1 +#define FS_BINARY_MOUNTDATA 2 +#define FS_HAS_SUBTYPE 4 +#define FS_USERNS_MOUNT 8 /* Can be mounted by userns root */ +#define FS_USERNS_DEV_MOUNT 16 /* A userns mount does not imply MNT_NODEV */ +#define FS_REVAL_DOT 16384 /* Check the paths ".", ".." for staleness */ +#define FS_RENAME_DOES_D_MOVE 32768 /* FS will handle d_move() during rename() internally. */ struct dentry *(*mount) (struct file_system_type *, int, const char *, void *); void (*kill_sb) (struct super_block *); @@ -1923,7 +2049,6 @@ extern void unregister_blkdev(unsigned int, const char *); extern struct block_device *bdget(dev_t); extern struct block_device *bdgrab(struct block_device *bdev); extern void bd_set_size(struct block_device *, loff_t size); -extern sector_t blkdev_max_block(struct block_device *bdev); extern void bd_forget(struct inode *inode); extern void bdput(struct block_device *); extern void invalidate_bdev(struct block_device *); @@ -2163,9 +2288,9 @@ extern ino_t find_inode_number(struct dentry *, struct qstr *); #include <linux/err.h> /* needed for stackable file system support */ -extern loff_t default_llseek(struct file *file, loff_t offset, int origin); +extern loff_t default_llseek(struct file *file, loff_t offset, int whence); -extern loff_t vfs_llseek(struct file *file, loff_t offset, int origin); +extern loff_t vfs_llseek(struct file *file, loff_t offset, int whence); extern int inode_init_always(struct super_block *, struct inode *); extern void inode_init_once(struct inode *); @@ -2253,8 +2378,6 @@ extern int generic_segment_checks(const struct iovec *iov, unsigned long *nr_segs, size_t *count, int access_flags); /* fs/block_dev.c */ -extern ssize_t blkdev_aio_read(struct kiocb *iocb, const struct iovec *iov, - unsigned long nr_segs, loff_t pos); extern ssize_t blkdev_aio_write(struct kiocb *iocb, const struct iovec *iov, unsigned long nr_segs, loff_t pos); extern int blkdev_fsync(struct file *filp, loff_t start, loff_t end, @@ -2275,11 +2398,11 @@ extern long do_splice_direct(struct file *in, loff_t *ppos, struct file *out, extern void file_ra_state_init(struct file_ra_state *ra, struct address_space *mapping); -extern loff_t noop_llseek(struct file *file, loff_t offset, int origin); -extern loff_t no_llseek(struct file *file, loff_t offset, int origin); -extern loff_t generic_file_llseek(struct file *file, loff_t offset, int origin); +extern loff_t noop_llseek(struct file *file, loff_t offset, int whence); +extern loff_t no_llseek(struct file *file, loff_t offset, int whence); +extern loff_t generic_file_llseek(struct file *file, loff_t offset, int whence); extern loff_t generic_file_llseek_size(struct file *file, loff_t offset, - int origin, loff_t maxsize, loff_t eof); + int whence, loff_t maxsize, loff_t eof); extern int generic_file_open(struct inode * inode, struct file * filp); extern int nonseekable_open(struct inode * inode, struct file * filp); diff --git a/include/linux/fs_struct.h b/include/linux/fs_struct.h index 003dc0fd7347..d0ae3a84bcfb 100644 --- a/include/linux/fs_struct.h +++ b/include/linux/fs_struct.h @@ -21,7 +21,6 @@ extern void set_fs_root(struct fs_struct *, struct path *); extern void set_fs_pwd(struct fs_struct *, struct path *); extern struct fs_struct *copy_fs_struct(struct fs_struct *); extern void free_fs_struct(struct fs_struct *); -extern void daemonize_fs_struct(void); extern int unshare_fs_struct(void); static inline void get_fs_root(struct fs_struct *fs, struct path *root) diff --git a/include/linux/fsl-diu-fb.h b/include/linux/fsl-diu-fb.h index 11c16a1fb9e3..a1e8277120c7 100644 --- a/include/linux/fsl-diu-fb.h +++ b/include/linux/fsl-diu-fb.h @@ -47,6 +47,15 @@ struct aoi_display_offset { #define MFB_GET_PIXFMT _IOR('M', 8, __u32) /* + * The MPC5121 BSP comes with a gamma_set utility that initializes the + * gamma table. Unfortunately, it uses bad values for the IOCTL commands, + * but there's nothing we can do about it now. These ioctls are only + * supported on the MPC5121. + */ +#define MFB_SET_GAMMA _IOW('M', 1, __u8) +#define MFB_GET_GAMMA _IOR('M', 1, __u8) + +/* * The original definitions of MFB_SET_PIXFMT and MFB_GET_PIXFMT used the * wrong value for 'size' field of the ioctl. The current macros above use the * right size, but we still need to provide backwards compatibility, at least diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index a52f2f4fe030..92691d85c320 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -394,7 +394,7 @@ ssize_t ftrace_filter_write(struct file *file, const char __user *ubuf, size_t cnt, loff_t *ppos); ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf, size_t cnt, loff_t *ppos); -loff_t ftrace_regex_lseek(struct file *file, loff_t offset, int origin); +loff_t ftrace_regex_lseek(struct file *file, loff_t offset, int whence); int ftrace_regex_release(struct inode *inode, struct file *file); void __init @@ -559,7 +559,7 @@ static inline ssize_t ftrace_filter_write(struct file *file, const char __user * size_t cnt, loff_t *ppos) { return -ENODEV; } static inline ssize_t ftrace_notrace_write(struct file *file, const char __user *ubuf, size_t cnt, loff_t *ppos) { return -ENODEV; } -static inline loff_t ftrace_regex_lseek(struct file *file, loff_t offset, int origin) +static inline loff_t ftrace_regex_lseek(struct file *file, loff_t offset, int whence) { return -ENODEV; } diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index 642928cf57b4..a3d489531d83 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -86,6 +86,12 @@ struct trace_iterator { cpumask_var_t started; }; +enum trace_iter_flags { + TRACE_FILE_LAT_FMT = 1, + TRACE_FILE_ANNOTATE = 2, + TRACE_FILE_TIME_IN_NS = 4, +}; + struct trace_event; @@ -127,13 +133,13 @@ trace_current_buffer_lock_reserve(struct ring_buffer **current_buffer, void trace_current_buffer_unlock_commit(struct ring_buffer *buffer, struct ring_buffer_event *event, unsigned long flags, int pc); -void trace_nowake_buffer_unlock_commit(struct ring_buffer *buffer, - struct ring_buffer_event *event, - unsigned long flags, int pc); -void trace_nowake_buffer_unlock_commit_regs(struct ring_buffer *buffer, - struct ring_buffer_event *event, - unsigned long flags, int pc, - struct pt_regs *regs); +void trace_buffer_unlock_commit(struct ring_buffer *buffer, + struct ring_buffer_event *event, + unsigned long flags, int pc); +void trace_buffer_unlock_commit_regs(struct ring_buffer *buffer, + struct ring_buffer_event *event, + unsigned long flags, int pc, + struct pt_regs *regs); void trace_current_buffer_discard_commit(struct ring_buffer *buffer, struct ring_buffer_event *event); diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 4f440b3e89fe..79b8bba19363 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -88,10 +88,14 @@ struct disk_stats { }; #define PARTITION_META_INFO_VOLNAMELTH 64 -#define PARTITION_META_INFO_UUIDLTH 16 +/* + * Enough for the string representation of any kind of UUID plus NULL. + * EFI UUID is 36 characters. MSDOS UUID is 11 characters. + */ +#define PARTITION_META_INFO_UUIDLTH 37 struct partition_meta_info { - u8 uuid[PARTITION_META_INFO_UUIDLTH]; /* always big endian */ + char uuid[PARTITION_META_INFO_UUIDLTH]; u8 volname[PARTITION_META_INFO_VOLNAMELTH]; }; diff --git a/include/linux/genl_magic_func.h b/include/linux/genl_magic_func.h new file mode 100644 index 000000000000..023bc346b877 --- /dev/null +++ b/include/linux/genl_magic_func.h @@ -0,0 +1,422 @@ +#ifndef GENL_MAGIC_FUNC_H +#define GENL_MAGIC_FUNC_H + +#include <linux/genl_magic_struct.h> + +/* + * Magic: declare tla policy {{{1 + * Magic: declare nested policies + * {{{2 + */ +#undef GENL_mc_group +#define GENL_mc_group(group) + +#undef GENL_notification +#define GENL_notification(op_name, op_num, mcast_group, tla_list) + +#undef GENL_op +#define GENL_op(op_name, op_num, handler, tla_list) + +#undef GENL_struct +#define GENL_struct(tag_name, tag_number, s_name, s_fields) \ + [tag_name] = { .type = NLA_NESTED }, + +static struct nla_policy CONCAT_(GENL_MAGIC_FAMILY, _tla_nl_policy)[] = { +#include GENL_MAGIC_INCLUDE_FILE +}; + +#undef GENL_struct +#define GENL_struct(tag_name, tag_number, s_name, s_fields) \ +static struct nla_policy s_name ## _nl_policy[] __read_mostly = \ +{ s_fields }; + +#undef __field +#define __field(attr_nr, attr_flag, name, nla_type, _type, __get, \ + __put, __is_signed) \ + [attr_nr] = { .type = nla_type }, + +#undef __array +#define __array(attr_nr, attr_flag, name, nla_type, _type, maxlen, \ + __get, __put, __is_signed) \ + [attr_nr] = { .type = nla_type, \ + .len = maxlen - (nla_type == NLA_NUL_STRING) }, + +#include GENL_MAGIC_INCLUDE_FILE + +#ifndef __KERNEL__ +#ifndef pr_info +#define pr_info(args...) fprintf(stderr, args); +#endif +#endif + +#ifdef GENL_MAGIC_DEBUG +static void dprint_field(const char *dir, int nla_type, + const char *name, void *valp) +{ + __u64 val = valp ? *(__u32 *)valp : 1; + switch (nla_type) { + case NLA_U8: val = (__u8)val; + case NLA_U16: val = (__u16)val; + case NLA_U32: val = (__u32)val; + pr_info("%s attr %s: %d 0x%08x\n", dir, + name, (int)val, (unsigned)val); + break; + case NLA_U64: + val = *(__u64*)valp; + pr_info("%s attr %s: %lld 0x%08llx\n", dir, + name, (long long)val, (unsigned long long)val); + break; + case NLA_FLAG: + if (val) + pr_info("%s attr %s: set\n", dir, name); + break; + } +} + +static void dprint_array(const char *dir, int nla_type, + const char *name, const char *val, unsigned len) +{ + switch (nla_type) { + case NLA_NUL_STRING: + if (len && val[len-1] == '\0') + len--; + pr_info("%s attr %s: [len:%u] '%s'\n", dir, name, len, val); + break; + default: + /* we can always show 4 byte, + * thats what nlattr are aligned to. */ + pr_info("%s attr %s: [len:%u] %02x%02x%02x%02x ...\n", + dir, name, len, val[0], val[1], val[2], val[3]); + } +} + +#define DPRINT_TLA(a, op, b) pr_info("%s %s %s\n", a, op, b); + +/* Name is a member field name of the struct s. + * If s is NULL (only parsing, no copy requested in *_from_attrs()), + * nla is supposed to point to the attribute containing the information + * corresponding to that struct member. */ +#define DPRINT_FIELD(dir, nla_type, name, s, nla) \ + do { \ + if (s) \ + dprint_field(dir, nla_type, #name, &s->name); \ + else if (nla) \ + dprint_field(dir, nla_type, #name, \ + (nla_type == NLA_FLAG) ? NULL \ + : nla_data(nla)); \ + } while (0) + +#define DPRINT_ARRAY(dir, nla_type, name, s, nla) \ + do { \ + if (s) \ + dprint_array(dir, nla_type, #name, \ + s->name, s->name ## _len); \ + else if (nla) \ + dprint_array(dir, nla_type, #name, \ + nla_data(nla), nla_len(nla)); \ + } while (0) +#else +#define DPRINT_TLA(a, op, b) do {} while (0) +#define DPRINT_FIELD(dir, nla_type, name, s, nla) do {} while (0) +#define DPRINT_ARRAY(dir, nla_type, name, s, nla) do {} while (0) +#endif + +/* + * Magic: provide conversion functions {{{1 + * populate struct from attribute table: + * {{{2 + */ + +/* processing of generic netlink messages is serialized. + * use one static buffer for parsing of nested attributes */ +static struct nlattr *nested_attr_tb[128]; + +#ifndef BUILD_BUG_ON +/* Force a compilation error if condition is true */ +#define BUILD_BUG_ON(condition) ((void)BUILD_BUG_ON_ZERO(condition)) +/* Force a compilation error if condition is true, but also produce a + result (of value 0 and type size_t), so the expression can be used + e.g. in a structure initializer (or where-ever else comma expressions + aren't permitted). */ +#define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:-!!(e); })) +#define BUILD_BUG_ON_NULL(e) ((void *)sizeof(struct { int:-!!(e); })) +#endif + +#undef GENL_struct +#define GENL_struct(tag_name, tag_number, s_name, s_fields) \ +/* *_from_attrs functions are static, but potentially unused */ \ +static int __ ## s_name ## _from_attrs(struct s_name *s, \ + struct genl_info *info, bool exclude_invariants) \ +{ \ + const int maxtype = ARRAY_SIZE(s_name ## _nl_policy)-1; \ + struct nlattr *tla = info->attrs[tag_number]; \ + struct nlattr **ntb = nested_attr_tb; \ + struct nlattr *nla; \ + int err; \ + BUILD_BUG_ON(ARRAY_SIZE(s_name ## _nl_policy) > ARRAY_SIZE(nested_attr_tb)); \ + if (!tla) \ + return -ENOMSG; \ + DPRINT_TLA(#s_name, "<=-", #tag_name); \ + err = drbd_nla_parse_nested(ntb, maxtype, tla, s_name ## _nl_policy); \ + if (err) \ + return err; \ + \ + s_fields \ + return 0; \ +} __attribute__((unused)) \ +static int s_name ## _from_attrs(struct s_name *s, \ + struct genl_info *info) \ +{ \ + return __ ## s_name ## _from_attrs(s, info, false); \ +} __attribute__((unused)) \ +static int s_name ## _from_attrs_for_change(struct s_name *s, \ + struct genl_info *info) \ +{ \ + return __ ## s_name ## _from_attrs(s, info, true); \ +} __attribute__((unused)) \ + +#define __assign(attr_nr, attr_flag, name, nla_type, type, assignment...) \ + nla = ntb[attr_nr]; \ + if (nla) { \ + if (exclude_invariants && ((attr_flag) & DRBD_F_INVARIANT)) { \ + pr_info("<< must not change invariant attr: %s\n", #name); \ + return -EEXIST; \ + } \ + assignment; \ + } else if (exclude_invariants && ((attr_flag) & DRBD_F_INVARIANT)) { \ + /* attribute missing from payload, */ \ + /* which was expected */ \ + } else if ((attr_flag) & DRBD_F_REQUIRED) { \ + pr_info("<< missing attr: %s\n", #name); \ + return -ENOMSG; \ + } + +#undef __field +#define __field(attr_nr, attr_flag, name, nla_type, type, __get, __put, \ + __is_signed) \ + __assign(attr_nr, attr_flag, name, nla_type, type, \ + if (s) \ + s->name = __get(nla); \ + DPRINT_FIELD("<<", nla_type, name, s, nla)) + +/* validate_nla() already checked nla_len <= maxlen appropriately. */ +#undef __array +#define __array(attr_nr, attr_flag, name, nla_type, type, maxlen, \ + __get, __put, __is_signed) \ + __assign(attr_nr, attr_flag, name, nla_type, type, \ + if (s) \ + s->name ## _len = \ + __get(s->name, nla, maxlen); \ + DPRINT_ARRAY("<<", nla_type, name, s, nla)) + +#include GENL_MAGIC_INCLUDE_FILE + +#undef GENL_struct +#define GENL_struct(tag_name, tag_number, s_name, s_fields) + +/* + * Magic: define op number to op name mapping {{{1 + * {{{2 + */ +const char *CONCAT_(GENL_MAGIC_FAMILY, _genl_cmd_to_str)(__u8 cmd) +{ + switch (cmd) { +#undef GENL_op +#define GENL_op(op_name, op_num, handler, tla_list) \ + case op_num: return #op_name; +#include GENL_MAGIC_INCLUDE_FILE + default: + return "unknown"; + } +} + +#ifdef __KERNEL__ +#include <linux/stringify.h> +/* + * Magic: define genl_ops {{{1 + * {{{2 + */ + +#undef GENL_op +#define GENL_op(op_name, op_num, handler, tla_list) \ +{ \ + handler \ + .cmd = op_name, \ + .policy = CONCAT_(GENL_MAGIC_FAMILY, _tla_nl_policy), \ +}, + +#define ZZZ_genl_ops CONCAT_(GENL_MAGIC_FAMILY, _genl_ops) +static struct genl_ops ZZZ_genl_ops[] __read_mostly = { +#include GENL_MAGIC_INCLUDE_FILE +}; + +#undef GENL_op +#define GENL_op(op_name, op_num, handler, tla_list) + +/* + * Define the genl_family, multicast groups, {{{1 + * and provide register/unregister functions. + * {{{2 + */ +#define ZZZ_genl_family CONCAT_(GENL_MAGIC_FAMILY, _genl_family) +static struct genl_family ZZZ_genl_family __read_mostly = { + .id = GENL_ID_GENERATE, + .name = __stringify(GENL_MAGIC_FAMILY), + .version = GENL_MAGIC_VERSION, +#ifdef GENL_MAGIC_FAMILY_HDRSZ + .hdrsize = NLA_ALIGN(GENL_MAGIC_FAMILY_HDRSZ), +#endif + .maxattr = ARRAY_SIZE(drbd_tla_nl_policy)-1, +}; + +/* + * Magic: define multicast groups + * Magic: define multicast group registration helper + */ +#undef GENL_mc_group +#define GENL_mc_group(group) \ +static struct genl_multicast_group \ +CONCAT_(GENL_MAGIC_FAMILY, _mcg_ ## group) __read_mostly = { \ + .name = #group, \ +}; \ +static int CONCAT_(GENL_MAGIC_FAMILY, _genl_multicast_ ## group)( \ + struct sk_buff *skb, gfp_t flags) \ +{ \ + unsigned int group_id = \ + CONCAT_(GENL_MAGIC_FAMILY, _mcg_ ## group).id; \ + if (!group_id) \ + return -EINVAL; \ + return genlmsg_multicast(skb, 0, group_id, flags); \ +} + +#include GENL_MAGIC_INCLUDE_FILE + +int CONCAT_(GENL_MAGIC_FAMILY, _genl_register)(void) +{ + int err = genl_register_family_with_ops(&ZZZ_genl_family, + ZZZ_genl_ops, ARRAY_SIZE(ZZZ_genl_ops)); + if (err) + return err; +#undef GENL_mc_group +#define GENL_mc_group(group) \ + err = genl_register_mc_group(&ZZZ_genl_family, \ + &CONCAT_(GENL_MAGIC_FAMILY, _mcg_ ## group)); \ + if (err) \ + goto fail; \ + else \ + pr_info("%s: mcg %s: %u\n", #group, \ + __stringify(GENL_MAGIC_FAMILY), \ + CONCAT_(GENL_MAGIC_FAMILY, _mcg_ ## group).id); + +#include GENL_MAGIC_INCLUDE_FILE + +#undef GENL_mc_group +#define GENL_mc_group(group) + return 0; +fail: + genl_unregister_family(&ZZZ_genl_family); + return err; +} + +void CONCAT_(GENL_MAGIC_FAMILY, _genl_unregister)(void) +{ + genl_unregister_family(&ZZZ_genl_family); +} + +/* + * Magic: provide conversion functions {{{1 + * populate skb from struct. + * {{{2 + */ + +#undef GENL_op +#define GENL_op(op_name, op_num, handler, tla_list) + +#undef GENL_struct +#define GENL_struct(tag_name, tag_number, s_name, s_fields) \ +static int s_name ## _to_skb(struct sk_buff *skb, struct s_name *s, \ + const bool exclude_sensitive) \ +{ \ + struct nlattr *tla = nla_nest_start(skb, tag_number); \ + if (!tla) \ + goto nla_put_failure; \ + DPRINT_TLA(#s_name, "-=>", #tag_name); \ + s_fields \ + nla_nest_end(skb, tla); \ + return 0; \ + \ +nla_put_failure: \ + if (tla) \ + nla_nest_cancel(skb, tla); \ + return -EMSGSIZE; \ +} \ +static inline int s_name ## _to_priv_skb(struct sk_buff *skb, \ + struct s_name *s) \ +{ \ + return s_name ## _to_skb(skb, s, 0); \ +} \ +static inline int s_name ## _to_unpriv_skb(struct sk_buff *skb, \ + struct s_name *s) \ +{ \ + return s_name ## _to_skb(skb, s, 1); \ +} + + +#undef __field +#define __field(attr_nr, attr_flag, name, nla_type, type, __get, __put, \ + __is_signed) \ + if (!exclude_sensitive || !((attr_flag) & DRBD_F_SENSITIVE)) { \ + DPRINT_FIELD(">>", nla_type, name, s, NULL); \ + if (__put(skb, attr_nr, s->name)) \ + goto nla_put_failure; \ + } + +#undef __array +#define __array(attr_nr, attr_flag, name, nla_type, type, maxlen, \ + __get, __put, __is_signed) \ + if (!exclude_sensitive || !((attr_flag) & DRBD_F_SENSITIVE)) { \ + DPRINT_ARRAY(">>",nla_type, name, s, NULL); \ + if (__put(skb, attr_nr, min_t(int, maxlen, \ + s->name ## _len + (nla_type == NLA_NUL_STRING)),\ + s->name)) \ + goto nla_put_failure; \ + } + +#include GENL_MAGIC_INCLUDE_FILE + + +/* Functions for initializing structs to default values. */ + +#undef __field +#define __field(attr_nr, attr_flag, name, nla_type, type, __get, __put, \ + __is_signed) +#undef __array +#define __array(attr_nr, attr_flag, name, nla_type, type, maxlen, \ + __get, __put, __is_signed) +#undef __u32_field_def +#define __u32_field_def(attr_nr, attr_flag, name, default) \ + x->name = default; +#undef __s32_field_def +#define __s32_field_def(attr_nr, attr_flag, name, default) \ + x->name = default; +#undef __flg_field_def +#define __flg_field_def(attr_nr, attr_flag, name, default) \ + x->name = default; +#undef __str_field_def +#define __str_field_def(attr_nr, attr_flag, name, maxlen) \ + memset(x->name, 0, sizeof(x->name)); \ + x->name ## _len = 0; +#undef GENL_struct +#define GENL_struct(tag_name, tag_number, s_name, s_fields) \ +static void set_ ## s_name ## _defaults(struct s_name *x) __attribute__((unused)); \ +static void set_ ## s_name ## _defaults(struct s_name *x) { \ +s_fields \ +} + +#include GENL_MAGIC_INCLUDE_FILE + +#endif /* __KERNEL__ */ + +/* }}}1 */ +#endif /* GENL_MAGIC_FUNC_H */ +/* vim: set foldmethod=marker foldlevel=1 nofoldenable : */ diff --git a/include/linux/genl_magic_struct.h b/include/linux/genl_magic_struct.h new file mode 100644 index 000000000000..eecd19b37001 --- /dev/null +++ b/include/linux/genl_magic_struct.h @@ -0,0 +1,277 @@ +#ifndef GENL_MAGIC_STRUCT_H +#define GENL_MAGIC_STRUCT_H + +#ifndef GENL_MAGIC_FAMILY +# error "you need to define GENL_MAGIC_FAMILY before inclusion" +#endif + +#ifndef GENL_MAGIC_VERSION +# error "you need to define GENL_MAGIC_VERSION before inclusion" +#endif + +#ifndef GENL_MAGIC_INCLUDE_FILE +# error "you need to define GENL_MAGIC_INCLUDE_FILE before inclusion" +#endif + +#include <linux/genetlink.h> +#include <linux/types.h> + +#define CONCAT__(a,b) a ## b +#define CONCAT_(a,b) CONCAT__(a,b) + +extern int CONCAT_(GENL_MAGIC_FAMILY, _genl_register)(void); +extern void CONCAT_(GENL_MAGIC_FAMILY, _genl_unregister)(void); + +/* + * Extension of genl attribute validation policies {{{2 + */ + +/* + * @DRBD_GENLA_F_MANDATORY: By default, netlink ignores attributes it does not + * know about. This flag can be set in nlattr->nla_type to indicate that this + * attribute must not be ignored. + * + * We check and remove this flag in drbd_nla_check_mandatory() before + * validating the attribute types and lengths via nla_parse_nested(). + */ +#define DRBD_GENLA_F_MANDATORY (1 << 14) + +/* + * Flags specific to drbd and not visible at the netlink layer, used in + * <struct>_from_attrs and <struct>_to_skb: + * + * @DRBD_F_REQUIRED: Attribute is required; a request without this attribute is + * invalid. + * + * @DRBD_F_SENSITIVE: Attribute includes sensitive information and must not be + * included in unpriviledged get requests or broadcasts. + * + * @DRBD_F_INVARIANT: Attribute is set when an object is initially created, but + * cannot subsequently be changed. + */ +#define DRBD_F_REQUIRED (1 << 0) +#define DRBD_F_SENSITIVE (1 << 1) +#define DRBD_F_INVARIANT (1 << 2) + +#define __nla_type(x) ((__u16)((x) & NLA_TYPE_MASK & ~DRBD_GENLA_F_MANDATORY)) + +/* }}}1 + * MAGIC + * multi-include macro expansion magic starts here + */ + +/* MAGIC helpers {{{2 */ + +/* possible field types */ +#define __flg_field(attr_nr, attr_flag, name) \ + __field(attr_nr, attr_flag, name, NLA_U8, char, \ + nla_get_u8, nla_put_u8, false) +#define __u8_field(attr_nr, attr_flag, name) \ + __field(attr_nr, attr_flag, name, NLA_U8, unsigned char, \ + nla_get_u8, nla_put_u8, false) +#define __u16_field(attr_nr, attr_flag, name) \ + __field(attr_nr, attr_flag, name, NLA_U16, __u16, \ + nla_get_u16, nla_put_u16, false) +#define __u32_field(attr_nr, attr_flag, name) \ + __field(attr_nr, attr_flag, name, NLA_U32, __u32, \ + nla_get_u32, nla_put_u32, false) +#define __s32_field(attr_nr, attr_flag, name) \ + __field(attr_nr, attr_flag, name, NLA_U32, __s32, \ + nla_get_u32, nla_put_u32, true) +#define __u64_field(attr_nr, attr_flag, name) \ + __field(attr_nr, attr_flag, name, NLA_U64, __u64, \ + nla_get_u64, nla_put_u64, false) +#define __str_field(attr_nr, attr_flag, name, maxlen) \ + __array(attr_nr, attr_flag, name, NLA_NUL_STRING, char, maxlen, \ + nla_strlcpy, nla_put, false) +#define __bin_field(attr_nr, attr_flag, name, maxlen) \ + __array(attr_nr, attr_flag, name, NLA_BINARY, char, maxlen, \ + nla_memcpy, nla_put, false) + +/* fields with default values */ +#define __flg_field_def(attr_nr, attr_flag, name, default) \ + __flg_field(attr_nr, attr_flag, name) +#define __u32_field_def(attr_nr, attr_flag, name, default) \ + __u32_field(attr_nr, attr_flag, name) +#define __s32_field_def(attr_nr, attr_flag, name, default) \ + __s32_field(attr_nr, attr_flag, name) +#define __str_field_def(attr_nr, attr_flag, name, maxlen) \ + __str_field(attr_nr, attr_flag, name, maxlen) + +#define GENL_op_init(args...) args +#define GENL_doit(handler) \ + .doit = handler, \ + .flags = GENL_ADMIN_PERM, +#define GENL_dumpit(handler) \ + .dumpit = handler, \ + .flags = GENL_ADMIN_PERM, + +/* }}}1 + * Magic: define the enum symbols for genl_ops + * Magic: define the enum symbols for top level attributes + * Magic: define the enum symbols for nested attributes + * {{{2 + */ + +#undef GENL_struct +#define GENL_struct(tag_name, tag_number, s_name, s_fields) + +#undef GENL_mc_group +#define GENL_mc_group(group) + +#undef GENL_notification +#define GENL_notification(op_name, op_num, mcast_group, tla_list) \ + op_name = op_num, + +#undef GENL_op +#define GENL_op(op_name, op_num, handler, tla_list) \ + op_name = op_num, + +enum { +#include GENL_MAGIC_INCLUDE_FILE +}; + +#undef GENL_notification +#define GENL_notification(op_name, op_num, mcast_group, tla_list) + +#undef GENL_op +#define GENL_op(op_name, op_num, handler, attr_list) + +#undef GENL_struct +#define GENL_struct(tag_name, tag_number, s_name, s_fields) \ + tag_name = tag_number, + +enum { +#include GENL_MAGIC_INCLUDE_FILE +}; + +#undef GENL_struct +#define GENL_struct(tag_name, tag_number, s_name, s_fields) \ +enum { \ + s_fields \ +}; + +#undef __field +#define __field(attr_nr, attr_flag, name, nla_type, type, \ + __get, __put, __is_signed) \ + T_ ## name = (__u16)(attr_nr | ((attr_flag) & DRBD_GENLA_F_MANDATORY)), + +#undef __array +#define __array(attr_nr, attr_flag, name, nla_type, type, \ + maxlen, __get, __put, __is_signed) \ + T_ ## name = (__u16)(attr_nr | ((attr_flag) & DRBD_GENLA_F_MANDATORY)), + +#include GENL_MAGIC_INCLUDE_FILE + +/* }}}1 + * Magic: compile time assert unique numbers for operations + * Magic: -"- unique numbers for top level attributes + * Magic: -"- unique numbers for nested attributes + * {{{2 + */ + +#undef GENL_struct +#define GENL_struct(tag_name, tag_number, s_name, s_fields) + +#undef GENL_op +#define GENL_op(op_name, op_num, handler, attr_list) \ + case op_name: + +#undef GENL_notification +#define GENL_notification(op_name, op_num, mcast_group, tla_list) \ + case op_name: + +static inline void ct_assert_unique_operations(void) +{ + switch (0) { +#include GENL_MAGIC_INCLUDE_FILE + ; + } +} + +#undef GENL_op +#define GENL_op(op_name, op_num, handler, attr_list) + +#undef GENL_notification +#define GENL_notification(op_name, op_num, mcast_group, tla_list) + +#undef GENL_struct +#define GENL_struct(tag_name, tag_number, s_name, s_fields) \ + case tag_number: + +static inline void ct_assert_unique_top_level_attributes(void) +{ + switch (0) { +#include GENL_MAGIC_INCLUDE_FILE + ; + } +} + +#undef GENL_struct +#define GENL_struct(tag_name, tag_number, s_name, s_fields) \ +static inline void ct_assert_unique_ ## s_name ## _attributes(void) \ +{ \ + switch (0) { \ + s_fields \ + ; \ + } \ +} + +#undef __field +#define __field(attr_nr, attr_flag, name, nla_type, type, __get, __put, \ + __is_signed) \ + case attr_nr: + +#undef __array +#define __array(attr_nr, attr_flag, name, nla_type, type, maxlen, \ + __get, __put, __is_signed) \ + case attr_nr: + +#include GENL_MAGIC_INCLUDE_FILE + +/* }}}1 + * Magic: declare structs + * struct <name> { + * fields + * }; + * {{{2 + */ + +#undef GENL_struct +#define GENL_struct(tag_name, tag_number, s_name, s_fields) \ +struct s_name { s_fields }; + +#undef __field +#define __field(attr_nr, attr_flag, name, nla_type, type, __get, __put, \ + __is_signed) \ + type name; + +#undef __array +#define __array(attr_nr, attr_flag, name, nla_type, type, maxlen, \ + __get, __put, __is_signed) \ + type name[maxlen]; \ + __u32 name ## _len; + +#include GENL_MAGIC_INCLUDE_FILE + +#undef GENL_struct +#define GENL_struct(tag_name, tag_number, s_name, s_fields) \ +enum { \ + s_fields \ +}; + +#undef __field +#define __field(attr_nr, attr_flag, name, nla_type, type, __get, __put, \ + is_signed) \ + F_ ## name ## _IS_SIGNED = is_signed, + +#undef __array +#define __array(attr_nr, attr_flag, name, nla_type, type, maxlen, \ + __get, __put, is_signed) \ + F_ ## name ## _IS_SIGNED = is_signed, + +#include GENL_MAGIC_INCLUDE_FILE + +/* }}}1 */ +#endif /* GENL_MAGIC_STRUCT_H */ +/* vim: set foldmethod=marker nofoldenable : */ diff --git a/include/linux/gfp.h b/include/linux/gfp.h index 02c1c9710be0..0f615eb23d05 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -30,9 +30,12 @@ struct vm_area_struct; #define ___GFP_HARDWALL 0x20000u #define ___GFP_THISNODE 0x40000u #define ___GFP_RECLAIMABLE 0x80000u +#define ___GFP_KMEMCG 0x100000u #define ___GFP_NOTRACK 0x200000u +#define ___GFP_NO_KSWAPD 0x400000u #define ___GFP_OTHER_NODE 0x800000u #define ___GFP_WRITE 0x1000000u +/* If the above are modified, __GFP_BITS_SHIFT may need updating */ /* * GFP bitmasks.. @@ -85,7 +88,9 @@ struct vm_area_struct; #define __GFP_RECLAIMABLE ((__force gfp_t)___GFP_RECLAIMABLE) /* Page is reclaimable */ #define __GFP_NOTRACK ((__force gfp_t)___GFP_NOTRACK) /* Don't track with kmemcheck */ +#define __GFP_NO_KSWAPD ((__force gfp_t)___GFP_NO_KSWAPD) #define __GFP_OTHER_NODE ((__force gfp_t)___GFP_OTHER_NODE) /* On behalf of other node */ +#define __GFP_KMEMCG ((__force gfp_t)___GFP_KMEMCG) /* Allocation comes from a memcg-accounted resource */ #define __GFP_WRITE ((__force gfp_t)___GFP_WRITE) /* Allocator intends to dirty page */ /* @@ -114,7 +119,8 @@ struct vm_area_struct; __GFP_MOVABLE) #define GFP_IOFS (__GFP_IO | __GFP_FS) #define GFP_TRANSHUGE (GFP_HIGHUSER_MOVABLE | __GFP_COMP | \ - __GFP_NOMEMALLOC | __GFP_NORETRY | __GFP_NOWARN) + __GFP_NOMEMALLOC | __GFP_NORETRY | __GFP_NOWARN | \ + __GFP_NO_KSWAPD) #ifdef CONFIG_NUMA #define GFP_THISNODE (__GFP_THISNODE | __GFP_NOWARN | __GFP_NORETRY) @@ -263,7 +269,7 @@ static inline enum zone_type gfp_zone(gfp_t flags) static inline int gfp_zonelist(gfp_t flags) { - if (NUMA_BUILD && unlikely(flags & __GFP_THISNODE)) + if (IS_ENABLED(CONFIG_NUMA) && unlikely(flags & __GFP_THISNODE)) return 1; return 0; @@ -361,6 +367,9 @@ extern void free_pages(unsigned long addr, unsigned int order); extern void free_hot_cold_page(struct page *page, int cold); extern void free_hot_cold_page_list(struct list_head *list, int cold); +extern void __free_memcg_kmem_pages(struct page *page, unsigned int order); +extern void free_memcg_kmem_pages(unsigned long addr, unsigned int order); + #define __free_page(page) __free_pages((page), 0) #define free_page(addr) free_pages((addr), 0) diff --git a/include/linux/gpio.h b/include/linux/gpio.h index 2e31e8b3a190..bfe665621536 100644 --- a/include/linux/gpio.h +++ b/include/linux/gpio.h @@ -72,9 +72,9 @@ static inline int irq_to_gpio(unsigned int irq) return -EINVAL; } -#endif +#endif /* ! CONFIG_ARCH_HAVE_CUSTOM_GPIO_H */ -#else +#else /* ! CONFIG_GENERIC_GPIO */ #include <linux/kernel.h> #include <linux/types.h> @@ -231,6 +231,21 @@ static inline int irq_to_gpio(unsigned irq) return -EINVAL; } -#endif +static inline int +gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name, + unsigned int gpio_offset, unsigned int pin_offset, + unsigned int npins) +{ + WARN_ON(1); + return -EINVAL; +} + +static inline void +gpiochip_remove_pin_ranges(struct gpio_chip *chip) +{ + WARN_ON(1); +} + +#endif /* ! CONFIG_GENERIC_GPIO */ #endif /* __LINUX_GPIO_H */ diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h index cab3da3d0949..624ef3f45c8e 100644 --- a/include/linux/hardirq.h +++ b/include/linux/hardirq.h @@ -4,6 +4,7 @@ #include <linux/preempt.h> #include <linux/lockdep.h> #include <linux/ftrace_irq.h> +#include <linux/vtime.h> #include <asm/hardirq.h> /* @@ -129,16 +130,6 @@ extern void synchronize_irq(unsigned int irq); # define synchronize_irq(irq) barrier() #endif -struct task_struct; - -#if !defined(CONFIG_VIRT_CPU_ACCOUNTING) && !defined(CONFIG_IRQ_TIME_ACCOUNTING) -static inline void vtime_account(struct task_struct *tsk) -{ -} -#else -extern void vtime_account(struct task_struct *tsk); -#endif - #if defined(CONFIG_TINY_RCU) || defined(CONFIG_TINY_PREEMPT_RCU) static inline void rcu_nmi_enter(void) @@ -162,7 +153,7 @@ extern void rcu_nmi_exit(void); */ #define __irq_enter() \ do { \ - vtime_account(current); \ + vtime_account_irq_enter(current); \ add_preempt_count(HARDIRQ_OFFSET); \ trace_hardirq_enter(); \ } while (0) @@ -178,7 +169,7 @@ extern void irq_enter(void); #define __irq_exit() \ do { \ trace_hardirq_exit(); \ - vtime_account(current); \ + vtime_account_irq_exit(current); \ sub_preempt_count(HARDIRQ_OFFSET); \ } while (0) diff --git a/include/linux/hash.h b/include/linux/hash.h index 24df9e70406f..61c97ae22e01 100644 --- a/include/linux/hash.h +++ b/include/linux/hash.h @@ -1,7 +1,7 @@ #ifndef _LINUX_HASH_H #define _LINUX_HASH_H /* Fast hashing routine for ints, longs and pointers. - (C) 2002 William Lee Irwin III, IBM */ + (C) 2002 Nadia Yvette Chambers, IBM */ /* * Knuth recommends primes in approximately golden ratio to the maximum diff --git a/include/linux/hashtable.h b/include/linux/hashtable.h new file mode 100644 index 000000000000..227c62424f3c --- /dev/null +++ b/include/linux/hashtable.h @@ -0,0 +1,192 @@ +/* + * Statically sized hash table implementation + * (C) 2012 Sasha Levin <levinsasha928@gmail.com> + */ + +#ifndef _LINUX_HASHTABLE_H +#define _LINUX_HASHTABLE_H + +#include <linux/list.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/hash.h> +#include <linux/rculist.h> + +#define DEFINE_HASHTABLE(name, bits) \ + struct hlist_head name[1 << (bits)] = \ + { [0 ... ((1 << (bits)) - 1)] = HLIST_HEAD_INIT } + +#define DECLARE_HASHTABLE(name, bits) \ + struct hlist_head name[1 << (bits)] + +#define HASH_SIZE(name) (ARRAY_SIZE(name)) +#define HASH_BITS(name) ilog2(HASH_SIZE(name)) + +/* Use hash_32 when possible to allow for fast 32bit hashing in 64bit kernels. */ +#define hash_min(val, bits) \ + (sizeof(val) <= 4 ? hash_32(val, bits) : hash_long(val, bits)) + +static inline void __hash_init(struct hlist_head *ht, unsigned int sz) +{ + unsigned int i; + + for (i = 0; i < sz; i++) + INIT_HLIST_HEAD(&ht[i]); +} + +/** + * hash_init - initialize a hash table + * @hashtable: hashtable to be initialized + * + * Calculates the size of the hashtable from the given parameter, otherwise + * same as hash_init_size. + * + * This has to be a macro since HASH_BITS() will not work on pointers since + * it calculates the size during preprocessing. + */ +#define hash_init(hashtable) __hash_init(hashtable, HASH_SIZE(hashtable)) + +/** + * hash_add - add an object to a hashtable + * @hashtable: hashtable to add to + * @node: the &struct hlist_node of the object to be added + * @key: the key of the object to be added + */ +#define hash_add(hashtable, node, key) \ + hlist_add_head(node, &hashtable[hash_min(key, HASH_BITS(hashtable))]) + +/** + * hash_add_rcu - add an object to a rcu enabled hashtable + * @hashtable: hashtable to add to + * @node: the &struct hlist_node of the object to be added + * @key: the key of the object to be added + */ +#define hash_add_rcu(hashtable, node, key) \ + hlist_add_head_rcu(node, &hashtable[hash_min(key, HASH_BITS(hashtable))]) + +/** + * hash_hashed - check whether an object is in any hashtable + * @node: the &struct hlist_node of the object to be checked + */ +static inline bool hash_hashed(struct hlist_node *node) +{ + return !hlist_unhashed(node); +} + +static inline bool __hash_empty(struct hlist_head *ht, unsigned int sz) +{ + unsigned int i; + + for (i = 0; i < sz; i++) + if (!hlist_empty(&ht[i])) + return false; + + return true; +} + +/** + * hash_empty - check whether a hashtable is empty + * @hashtable: hashtable to check + * + * This has to be a macro since HASH_BITS() will not work on pointers since + * it calculates the size during preprocessing. + */ +#define hash_empty(hashtable) __hash_empty(hashtable, HASH_SIZE(hashtable)) + +/** + * hash_del - remove an object from a hashtable + * @node: &struct hlist_node of the object to remove + */ +static inline void hash_del(struct hlist_node *node) +{ + hlist_del_init(node); +} + +/** + * hash_del_rcu - remove an object from a rcu enabled hashtable + * @node: &struct hlist_node of the object to remove + */ +static inline void hash_del_rcu(struct hlist_node *node) +{ + hlist_del_init_rcu(node); +} + +/** + * hash_for_each - iterate over a hashtable + * @name: hashtable to iterate + * @bkt: integer to use as bucket loop cursor + * @node: the &struct list_head to use as a loop cursor for each entry + * @obj: the type * to use as a loop cursor for each entry + * @member: the name of the hlist_node within the struct + */ +#define hash_for_each(name, bkt, node, obj, member) \ + for ((bkt) = 0, node = NULL; node == NULL && (bkt) < HASH_SIZE(name); (bkt)++)\ + hlist_for_each_entry(obj, node, &name[bkt], member) + +/** + * hash_for_each_rcu - iterate over a rcu enabled hashtable + * @name: hashtable to iterate + * @bkt: integer to use as bucket loop cursor + * @node: the &struct list_head to use as a loop cursor for each entry + * @obj: the type * to use as a loop cursor for each entry + * @member: the name of the hlist_node within the struct + */ +#define hash_for_each_rcu(name, bkt, node, obj, member) \ + for ((bkt) = 0, node = NULL; node == NULL && (bkt) < HASH_SIZE(name); (bkt)++)\ + hlist_for_each_entry_rcu(obj, node, &name[bkt], member) + +/** + * hash_for_each_safe - iterate over a hashtable safe against removal of + * hash entry + * @name: hashtable to iterate + * @bkt: integer to use as bucket loop cursor + * @node: the &struct list_head to use as a loop cursor for each entry + * @tmp: a &struct used for temporary storage + * @obj: the type * to use as a loop cursor for each entry + * @member: the name of the hlist_node within the struct + */ +#define hash_for_each_safe(name, bkt, node, tmp, obj, member) \ + for ((bkt) = 0, node = NULL; node == NULL && (bkt) < HASH_SIZE(name); (bkt)++)\ + hlist_for_each_entry_safe(obj, node, tmp, &name[bkt], member) + +/** + * hash_for_each_possible - iterate over all possible objects hashing to the + * same bucket + * @name: hashtable to iterate + * @obj: the type * to use as a loop cursor for each entry + * @node: the &struct list_head to use as a loop cursor for each entry + * @member: the name of the hlist_node within the struct + * @key: the key of the objects to iterate over + */ +#define hash_for_each_possible(name, obj, node, member, key) \ + hlist_for_each_entry(obj, node, &name[hash_min(key, HASH_BITS(name))], member) + +/** + * hash_for_each_possible_rcu - iterate over all possible objects hashing to the + * same bucket in an rcu enabled hashtable + * in a rcu enabled hashtable + * @name: hashtable to iterate + * @obj: the type * to use as a loop cursor for each entry + * @node: the &struct list_head to use as a loop cursor for each entry + * @member: the name of the hlist_node within the struct + * @key: the key of the objects to iterate over + */ +#define hash_for_each_possible_rcu(name, obj, node, member, key) \ + hlist_for_each_entry_rcu(obj, node, &name[hash_min(key, HASH_BITS(name))], member) + +/** + * hash_for_each_possible_safe - iterate over all possible objects hashing to the + * same bucket safe against removals + * @name: hashtable to iterate + * @obj: the type * to use as a loop cursor for each entry + * @node: the &struct list_head to use as a loop cursor for each entry + * @tmp: a &struct used for temporary storage + * @member: the name of the hlist_node within the struct + * @key: the key of the objects to iterate over + */ +#define hash_for_each_possible_safe(name, obj, node, tmp, member, key) \ + hlist_for_each_entry_safe(obj, node, tmp, \ + &name[hash_min(key, HASH_BITS(name))], member) + + +#endif diff --git a/include/linux/hdlc/Kbuild b/include/linux/hdlc/Kbuild index 1fb26448faa9..e69de29bb2d1 100644 --- a/include/linux/hdlc/Kbuild +++ b/include/linux/hdlc/Kbuild @@ -1 +0,0 @@ -header-y += ioctl.h diff --git a/include/linux/hdlc/ioctl.h b/include/linux/hdlc/ioctl.h deleted file mode 100644 index 583972364357..000000000000 --- a/include/linux/hdlc/ioctl.h +++ /dev/null @@ -1,81 +0,0 @@ -#ifndef __HDLC_IOCTL_H__ -#define __HDLC_IOCTL_H__ - - -#define GENERIC_HDLC_VERSION 4 /* For synchronization with sethdlc utility */ - -#define CLOCK_DEFAULT 0 /* Default setting */ -#define CLOCK_EXT 1 /* External TX and RX clock - DTE */ -#define CLOCK_INT 2 /* Internal TX and RX clock - DCE */ -#define CLOCK_TXINT 3 /* Internal TX and external RX clock */ -#define CLOCK_TXFROMRX 4 /* TX clock derived from external RX clock */ - - -#define ENCODING_DEFAULT 0 /* Default setting */ -#define ENCODING_NRZ 1 -#define ENCODING_NRZI 2 -#define ENCODING_FM_MARK 3 -#define ENCODING_FM_SPACE 4 -#define ENCODING_MANCHESTER 5 - - -#define PARITY_DEFAULT 0 /* Default setting */ -#define PARITY_NONE 1 /* No parity */ -#define PARITY_CRC16_PR0 2 /* CRC16, initial value 0x0000 */ -#define PARITY_CRC16_PR1 3 /* CRC16, initial value 0xFFFF */ -#define PARITY_CRC16_PR0_CCITT 4 /* CRC16, initial 0x0000, ITU-T version */ -#define PARITY_CRC16_PR1_CCITT 5 /* CRC16, initial 0xFFFF, ITU-T version */ -#define PARITY_CRC32_PR0_CCITT 6 /* CRC32, initial value 0x00000000 */ -#define PARITY_CRC32_PR1_CCITT 7 /* CRC32, initial value 0xFFFFFFFF */ - -#define LMI_DEFAULT 0 /* Default setting */ -#define LMI_NONE 1 /* No LMI, all PVCs are static */ -#define LMI_ANSI 2 /* ANSI Annex D */ -#define LMI_CCITT 3 /* ITU-T Annex A */ -#define LMI_CISCO 4 /* The "original" LMI, aka Gang of Four */ - -typedef struct { - unsigned int clock_rate; /* bits per second */ - unsigned int clock_type; /* internal, external, TX-internal etc. */ - unsigned short loopback; -} sync_serial_settings; /* V.35, V.24, X.21 */ - -typedef struct { - unsigned int clock_rate; /* bits per second */ - unsigned int clock_type; /* internal, external, TX-internal etc. */ - unsigned short loopback; - unsigned int slot_map; -} te1_settings; /* T1, E1 */ - -typedef struct { - unsigned short encoding; - unsigned short parity; -} raw_hdlc_proto; - -typedef struct { - unsigned int t391; - unsigned int t392; - unsigned int n391; - unsigned int n392; - unsigned int n393; - unsigned short lmi; - unsigned short dce; /* 1 for DCE (network side) operation */ -} fr_proto; - -typedef struct { - unsigned int dlci; -} fr_proto_pvc; /* for creating/deleting FR PVCs */ - -typedef struct { - unsigned int dlci; - char master[IFNAMSIZ]; /* Name of master FRAD device */ -}fr_proto_pvc_info; /* for returning PVC information only */ - -typedef struct { - unsigned int interval; - unsigned int timeout; -} cisco_proto; - -/* PPP doesn't need any info now - supply length = 0 to ioctl */ - -#endif /* __HDLC_IOCTL_H__ */ diff --git a/include/linux/hid-sensor-ids.h b/include/linux/hid-sensor-ids.h index ca8d7e94eb3c..55f277372fed 100644 --- a/include/linux/hid-sensor-ids.h +++ b/include/linux/hid-sensor-ids.h @@ -19,7 +19,6 @@ #ifndef _HID_SENSORS_IDS_H #define _HID_SENSORS_IDS_H -#define HID_UP_SENSOR 0x00200000 #define HID_MAX_PHY_DEVICES 0xFF /* Accel 3D (200073) */ diff --git a/include/linux/hid.h b/include/linux/hid.h index c076041a069e..7330a0fef0c0 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -167,6 +167,7 @@ struct hid_item { #define HID_UP_MSVENDOR 0xff000000 #define HID_UP_CUSTOM 0x00ff0000 #define HID_UP_LOGIVENDOR 0xffbc0000 +#define HID_UP_SENSOR 0x00200000 #define HID_USAGE 0x0000ffff @@ -292,6 +293,7 @@ struct hid_item { */ #define HID_GROUP_GENERIC 0x0001 #define HID_GROUP_MULTITOUCH 0x0002 +#define HID_GROUP_SENSOR_HUB 0x0003 /* * This is the global environment of the parser. This information is @@ -342,6 +344,7 @@ struct hid_collection { struct hid_usage { unsigned hid; /* hid usage code */ unsigned collection_index; /* index into collection array */ + unsigned usage_index; /* index into usage array */ /* hidinput data */ __u16 code; /* input driver code */ __u8 type; /* input driver type */ @@ -684,6 +687,7 @@ struct hid_ll_driver { extern int hid_debug; +extern bool hid_ignore(struct hid_device *); extern int hid_add_device(struct hid_device *); extern void hid_destroy_device(struct hid_device *); @@ -706,6 +710,7 @@ int hid_input_report(struct hid_device *, int type, u8 *, int, int); int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int code, struct hid_field **field); struct hid_field *hidinput_get_led_field(struct hid_device *hid); unsigned int hidinput_count_leds(struct hid_device *hid); +__s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code); void hid_output_report(struct hid_report *report, __u8 *data); struct hid_device *hid_allocate_device(void); struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id); @@ -716,6 +721,7 @@ int hid_connect(struct hid_device *hid, unsigned int connect_mask); void hid_disconnect(struct hid_device *hid); const struct hid_device_id *hid_match_id(struct hid_device *hdev, const struct hid_device_id *id); +s32 hid_snto32(__u32 value, unsigned n); /** * hid_map_usage - map usage input bits diff --git a/include/linux/hsi/Kbuild b/include/linux/hsi/Kbuild index 271a770b4784..e69de29bb2d1 100644 --- a/include/linux/hsi/Kbuild +++ b/include/linux/hsi/Kbuild @@ -1 +0,0 @@ -header-y += hsi_char.h diff --git a/include/linux/hsi/hsi_char.h b/include/linux/hsi/hsi_char.h deleted file mode 100644 index 76160b4f455d..000000000000 --- a/include/linux/hsi/hsi_char.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Part of the HSI character device driver. - * - * Copyright (C) 2010 Nokia Corporation. All rights reserved. - * - * Contact: Andras Domokos <andras.domokos at nokia.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - */ - - -#ifndef __HSI_CHAR_H -#define __HSI_CHAR_H - -#define HSI_CHAR_MAGIC 'k' -#define HSC_IOW(num, dtype) _IOW(HSI_CHAR_MAGIC, num, dtype) -#define HSC_IOR(num, dtype) _IOR(HSI_CHAR_MAGIC, num, dtype) -#define HSC_IOWR(num, dtype) _IOWR(HSI_CHAR_MAGIC, num, dtype) -#define HSC_IO(num) _IO(HSI_CHAR_MAGIC, num) - -#define HSC_RESET HSC_IO(16) -#define HSC_SET_PM HSC_IO(17) -#define HSC_SEND_BREAK HSC_IO(18) -#define HSC_SET_RX HSC_IOW(19, struct hsc_rx_config) -#define HSC_GET_RX HSC_IOW(20, struct hsc_rx_config) -#define HSC_SET_TX HSC_IOW(21, struct hsc_tx_config) -#define HSC_GET_TX HSC_IOW(22, struct hsc_tx_config) - -#define HSC_PM_DISABLE 0 -#define HSC_PM_ENABLE 1 - -#define HSC_MODE_STREAM 1 -#define HSC_MODE_FRAME 2 -#define HSC_FLOW_SYNC 0 -#define HSC_ARB_RR 0 -#define HSC_ARB_PRIO 1 - -struct hsc_rx_config { - uint32_t mode; - uint32_t flow; - uint32_t channels; -}; - -struct hsc_tx_config { - uint32_t mode; - uint32_t channels; - uint32_t speed; - uint32_t arb_mode; -}; - -#endif /* __HSI_CHAR_H */ diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h index b31cb7da0346..1d76f8ca90f0 100644 --- a/include/linux/huge_mm.h +++ b/include/linux/huge_mm.h @@ -8,6 +8,10 @@ extern int do_huge_pmd_anonymous_page(struct mm_struct *mm, extern int copy_huge_pmd(struct mm_struct *dst_mm, struct mm_struct *src_mm, pmd_t *dst_pmd, pmd_t *src_pmd, unsigned long addr, struct vm_area_struct *vma); +extern void huge_pmd_set_accessed(struct mm_struct *mm, + struct vm_area_struct *vma, + unsigned long address, pmd_t *pmd, + pmd_t orig_pmd, int dirty); extern int do_huge_pmd_wp_page(struct mm_struct *mm, struct vm_area_struct *vma, unsigned long address, pmd_t *pmd, pmd_t orig_pmd); @@ -27,7 +31,8 @@ extern int move_huge_pmd(struct vm_area_struct *vma, unsigned long new_addr, unsigned long old_end, pmd_t *old_pmd, pmd_t *new_pmd); extern int change_huge_pmd(struct vm_area_struct *vma, pmd_t *pmd, - unsigned long addr, pgprot_t newprot); + unsigned long addr, pgprot_t newprot, + int prot_numa); enum transparent_hugepage_flag { TRANSPARENT_HUGEPAGE_FLAG, @@ -35,6 +40,7 @@ enum transparent_hugepage_flag { TRANSPARENT_HUGEPAGE_DEFRAG_FLAG, TRANSPARENT_HUGEPAGE_DEFRAG_REQ_MADV_FLAG, TRANSPARENT_HUGEPAGE_DEFRAG_KHUGEPAGED_FLAG, + TRANSPARENT_HUGEPAGE_USE_ZERO_PAGE_FLAG, #ifdef CONFIG_DEBUG_VM TRANSPARENT_HUGEPAGE_DEBUG_COW_FLAG, #endif @@ -74,6 +80,9 @@ extern bool is_vma_temporary_stack(struct vm_area_struct *vma); (transparent_hugepage_flags & \ (1<<TRANSPARENT_HUGEPAGE_DEFRAG_REQ_MADV_FLAG) && \ (__vma)->vm_flags & VM_HUGEPAGE)) +#define transparent_hugepage_use_zero_page() \ + (transparent_hugepage_flags & \ + (1<<TRANSPARENT_HUGEPAGE_USE_ZERO_PAGE_FLAG)) #ifdef CONFIG_DEBUG_VM #define transparent_hugepage_debug_cow() \ (transparent_hugepage_flags & \ @@ -91,21 +100,25 @@ extern int handle_pte_fault(struct mm_struct *mm, struct vm_area_struct *vma, unsigned long address, pte_t *pte, pmd_t *pmd, unsigned int flags); extern int split_huge_page(struct page *page); -extern void __split_huge_page_pmd(struct mm_struct *mm, pmd_t *pmd); -#define split_huge_page_pmd(__mm, __pmd) \ +extern void __split_huge_page_pmd(struct vm_area_struct *vma, + unsigned long address, pmd_t *pmd); +#define split_huge_page_pmd(__vma, __address, __pmd) \ do { \ pmd_t *____pmd = (__pmd); \ if (unlikely(pmd_trans_huge(*____pmd))) \ - __split_huge_page_pmd(__mm, ____pmd); \ + __split_huge_page_pmd(__vma, __address, \ + ____pmd); \ } while (0) #define wait_split_huge_page(__anon_vma, __pmd) \ do { \ pmd_t *____pmd = (__pmd); \ - anon_vma_lock(__anon_vma); \ + anon_vma_lock_write(__anon_vma); \ anon_vma_unlock(__anon_vma); \ BUG_ON(pmd_trans_splitting(*____pmd) || \ pmd_trans_huge(*____pmd)); \ } while (0) +extern void split_huge_page_pmd_mm(struct mm_struct *mm, unsigned long address, + pmd_t *pmd); #if HPAGE_PMD_ORDER > MAX_ORDER #error "hugepages can't be allocated by the buddy allocator" #endif @@ -159,6 +172,10 @@ static inline struct page *compound_trans_head(struct page *page) } return page; } + +extern int do_huge_pmd_numa_page(struct mm_struct *mm, struct vm_area_struct *vma, + unsigned long addr, pmd_t pmd, pmd_t *pmdp); + #else /* CONFIG_TRANSPARENT_HUGEPAGE */ #define HPAGE_PMD_SHIFT ({ BUILD_BUG(); 0; }) #define HPAGE_PMD_MASK ({ BUILD_BUG(); 0; }) @@ -173,10 +190,12 @@ static inline int split_huge_page(struct page *page) { return 0; } -#define split_huge_page_pmd(__mm, __pmd) \ +#define split_huge_page_pmd(__vma, __address, __pmd) \ do { } while (0) #define wait_split_huge_page(__anon_vma, __pmd) \ do { } while (0) +#define split_huge_page_pmd_mm(__mm, __address, __pmd) \ + do { } while (0) #define compound_trans_head(page) compound_head(page) static inline int hugepage_madvise(struct vm_area_struct *vma, unsigned long *vm_flags, int advice) @@ -195,6 +214,13 @@ static inline int pmd_trans_huge_lock(pmd_t *pmd, { return 0; } + +static inline int do_huge_pmd_numa_page(struct mm_struct *mm, struct vm_area_struct *vma, + unsigned long addr, pmd_t pmd, pmd_t *pmdp) +{ + return 0; +} + #endif /* CONFIG_TRANSPARENT_HUGEPAGE */ #endif /* _LINUX_HUGE_MM_H */ diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index 225164842ab6..0c80d3f57a5b 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -87,7 +87,7 @@ struct page *follow_huge_pud(struct mm_struct *mm, unsigned long address, pud_t *pud, int write); int pmd_huge(pmd_t pmd); int pud_huge(pud_t pmd); -void hugetlb_change_protection(struct vm_area_struct *vma, +unsigned long hugetlb_change_protection(struct vm_area_struct *vma, unsigned long address, unsigned long end, pgprot_t newprot); #else /* !CONFIG_HUGETLB_PAGE */ @@ -132,7 +132,11 @@ static inline void copy_huge_page(struct page *dst, struct page *src) { } -#define hugetlb_change_protection(vma, address, end, newprot) +static inline unsigned long hugetlb_change_protection(struct vm_area_struct *vma, + unsigned long address, unsigned long end, pgprot_t newprot) +{ + return 0; +} static inline void __unmap_hugepage_range_final(struct mmu_gather *tlb, struct vm_area_struct *vma, unsigned long start, @@ -183,7 +187,8 @@ extern const struct file_operations hugetlbfs_file_operations; extern const struct vm_operations_struct hugetlb_vm_ops; struct file *hugetlb_file_setup(const char *name, unsigned long addr, size_t size, vm_flags_t acct, - struct user_struct **user, int creat_flags); + struct user_struct **user, int creat_flags, + int page_size_log); static inline int is_file_hugepages(struct file *file) { @@ -195,12 +200,14 @@ static inline int is_file_hugepages(struct file *file) return 0; } + #else /* !CONFIG_HUGETLBFS */ #define is_file_hugepages(file) 0 static inline struct file * hugetlb_file_setup(const char *name, unsigned long addr, size_t size, - vm_flags_t acctflag, struct user_struct **user, int creat_flags) + vm_flags_t acctflag, struct user_struct **user, int creat_flags, + int page_size_log) { return ERR_PTR(-ENOSYS); } diff --git a/include/linux/hugetlb_cgroup.h b/include/linux/hugetlb_cgroup.h index d73878c694b3..ce8217f7b5c2 100644 --- a/include/linux/hugetlb_cgroup.h +++ b/include/linux/hugetlb_cgroup.h @@ -62,7 +62,7 @@ extern void hugetlb_cgroup_uncharge_page(int idx, unsigned long nr_pages, struct page *page); extern void hugetlb_cgroup_uncharge_cgroup(int idx, unsigned long nr_pages, struct hugetlb_cgroup *h_cg); -extern int hugetlb_cgroup_file_init(int idx) __init; +extern void hugetlb_cgroup_file_init(void) __init; extern void hugetlb_cgroup_migrate(struct page *oldhpage, struct page *newhpage); @@ -111,9 +111,8 @@ hugetlb_cgroup_uncharge_cgroup(int idx, unsigned long nr_pages, return; } -static inline int __init hugetlb_cgroup_file_init(int idx) +static inline void hugetlb_cgroup_file_init(void) { - return 0; } static inline void hugetlb_cgroup_migrate(struct page *oldhpage, diff --git a/include/linux/hw_breakpoint.h b/include/linux/hw_breakpoint.h index 6ae9c631a1be..0464c85e63fd 100644 --- a/include/linux/hw_breakpoint.h +++ b/include/linux/hw_breakpoint.h @@ -1,35 +1,8 @@ #ifndef _LINUX_HW_BREAKPOINT_H #define _LINUX_HW_BREAKPOINT_H -enum { - HW_BREAKPOINT_LEN_1 = 1, - HW_BREAKPOINT_LEN_2 = 2, - HW_BREAKPOINT_LEN_4 = 4, - HW_BREAKPOINT_LEN_8 = 8, -}; - -enum { - HW_BREAKPOINT_EMPTY = 0, - HW_BREAKPOINT_R = 1, - HW_BREAKPOINT_W = 2, - HW_BREAKPOINT_RW = HW_BREAKPOINT_R | HW_BREAKPOINT_W, - HW_BREAKPOINT_X = 4, - HW_BREAKPOINT_INVALID = HW_BREAKPOINT_RW | HW_BREAKPOINT_X, -}; - -enum bp_type_idx { - TYPE_INST = 0, -#ifdef CONFIG_HAVE_MIXED_BREAKPOINTS_REGS - TYPE_DATA = 0, -#else - TYPE_DATA = 1, -#endif - TYPE_MAX -}; - -#ifdef __KERNEL__ - #include <linux/perf_event.h> +#include <uapi/linux/hw_breakpoint.h> #ifdef CONFIG_HAVE_HW_BREAKPOINT @@ -151,6 +124,4 @@ static inline struct arch_hw_breakpoint *counter_arch_bp(struct perf_event *bp) } #endif /* CONFIG_HAVE_HW_BREAKPOINT */ -#endif /* __KERNEL__ */ - #endif /* _LINUX_HW_BREAKPOINT_H */ diff --git a/include/linux/i2c-omap.h b/include/linux/i2c-omap.h index df804ba73e0b..babe0cf6d56b 100644 --- a/include/linux/i2c-omap.h +++ b/include/linux/i2c-omap.h @@ -20,8 +20,6 @@ #define OMAP_I2C_FLAG_NO_FIFO BIT(0) #define OMAP_I2C_FLAG_SIMPLE_CLOCK BIT(1) #define OMAP_I2C_FLAG_16BIT_DATA_REG BIT(2) -#define OMAP_I2C_FLAG_RESET_REGS_POSTIDLE BIT(3) -#define OMAP_I2C_FLAG_APPLY_ERRATA_I207 BIT(4) #define OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK BIT(5) #define OMAP_I2C_FLAG_FORCE_19200_INT_CLK BIT(6) /* how the CPU address bus must be translated for I2C unit access */ @@ -34,6 +32,7 @@ struct omap_i2c_bus_platform_data { u32 clkrate; u32 rev; u32 flags; + void (*set_mpu_wkup_lat)(struct device *dev, long set); }; #endif diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 800de224336b..d0c4db7b4872 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -259,6 +259,7 @@ static inline void i2c_set_clientdata(struct i2c_client *dev, void *data) * @platform_data: stored in i2c_client.dev.platform_data * @archdata: copied into i2c_client.dev.archdata * @of_node: pointer to OpenFirmware device node + * @acpi_node: ACPI device node * @irq: stored in i2c_client.irq * * I2C doesn't actually support hardware probing, although controllers and @@ -279,6 +280,7 @@ struct i2c_board_info { void *platform_data; struct dev_archdata *archdata; struct device_node *of_node; + struct acpi_dev_node acpi_node; int irq; }; @@ -501,4 +503,11 @@ static inline int i2c_adapter_id(struct i2c_adapter *adap) i2c_del_driver) #endif /* I2C */ + +#if IS_ENABLED(CONFIG_ACPI_I2C) +extern void acpi_i2c_register_devices(struct i2c_adapter *adap); +#else +static inline void acpi_i2c_register_devices(struct i2c_adapter *adap) {} +#endif + #endif /* _LINUX_I2C_H */ diff --git a/include/linux/i2c/i2c-hid.h b/include/linux/i2c/i2c-hid.h new file mode 100644 index 000000000000..60e411d764d4 --- /dev/null +++ b/include/linux/i2c/i2c-hid.h @@ -0,0 +1,35 @@ +/* + * HID over I2C protocol implementation + * + * Copyright (c) 2012 Benjamin Tissoires <benjamin.tissoires@gmail.com> + * Copyright (c) 2012 Ecole Nationale de l'Aviation Civile, France + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#ifndef __LINUX_I2C_HID_H +#define __LINUX_I2C_HID_H + +#include <linux/types.h> + +/** + * struct i2chid_platform_data - used by hid over i2c implementation. + * @hid_descriptor_address: i2c register where the HID descriptor is stored. + * + * Note that it is the responsibility of the platform driver (or the acpi 5.0 + * driver) to setup the irq related to the gpio in the struct i2c_board_info. + * The platform driver should also setup the gpio according to the device: + * + * A typical example is the following: + * irq = gpio_to_irq(intr_gpio); + * hkdk4412_i2c_devs5[0].irq = irq; // store the irq in i2c_board_info + * gpio_request(intr_gpio, "elan-irq"); + * s3c_gpio_setpull(intr_gpio, S3C_GPIO_PULL_UP); + */ +struct i2c_hid_platform_data { + u16 hid_descriptor_address; +}; + +#endif /* __LINUX_I2C_HID_H */ diff --git a/include/linux/i2c/i2c-sh_mobile.h b/include/linux/i2c/i2c-sh_mobile.h index beda7081aead..06e3089795fb 100644 --- a/include/linux/i2c/i2c-sh_mobile.h +++ b/include/linux/i2c/i2c-sh_mobile.h @@ -5,6 +5,7 @@ struct i2c_sh_mobile_platform_data { unsigned long bus_speed; + unsigned int clks_per_count; }; #endif /* __I2C_SH_MOBILE_H__ */ diff --git a/include/linux/i2c/pcf857x.h b/include/linux/i2c/pcf857x.h index 781e6bd06c34..0767a2a6b2f1 100644 --- a/include/linux/i2c/pcf857x.h +++ b/include/linux/i2c/pcf857x.h @@ -10,7 +10,6 @@ * @setup: optional callback issued once the GPIOs are valid * @teardown: optional callback issued before the GPIOs are invalidated * @context: optional parameter passed to setup() and teardown() - * @irq: optional interrupt number * * In addition to the I2C_BOARD_INFO() state appropriate to each chip, * the i2c_board_info used with the pcf875x driver must provide its @@ -40,8 +39,6 @@ struct pcf857x_platform_data { int gpio, unsigned ngpio, void *context); void *context; - - int irq; }; #endif /* __LINUX_PCF857X_H */ diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h index 9a5e28462324..1ff54b114efc 100644 --- a/include/linux/i2c/twl.h +++ b/include/linux/i2c/twl.h @@ -39,52 +39,51 @@ * address each module uses within a given i2c slave. */ -/* Slave 0 (i2c address 0x48) */ -#define TWL4030_MODULE_USB 0x00 - -/* Slave 1 (i2c address 0x49) */ -#define TWL4030_MODULE_AUDIO_VOICE 0x01 -#define TWL4030_MODULE_GPIO 0x02 -#define TWL4030_MODULE_INTBR 0x03 -#define TWL4030_MODULE_PIH 0x04 -#define TWL4030_MODULE_TEST 0x05 - -/* Slave 2 (i2c address 0x4a) */ -#define TWL4030_MODULE_KEYPAD 0x06 -#define TWL4030_MODULE_MADC 0x07 -#define TWL4030_MODULE_INTERRUPTS 0x08 -#define TWL4030_MODULE_LED 0x09 -#define TWL4030_MODULE_MAIN_CHARGE 0x0A -#define TWL4030_MODULE_PRECHARGE 0x0B -#define TWL4030_MODULE_PWM0 0x0C -#define TWL4030_MODULE_PWM1 0x0D -#define TWL4030_MODULE_PWMA 0x0E -#define TWL4030_MODULE_PWMB 0x0F - -#define TWL5031_MODULE_ACCESSORY 0x10 -#define TWL5031_MODULE_INTERRUPTS 0x11 - -/* Slave 3 (i2c address 0x4b) */ -#define TWL4030_MODULE_BACKUP 0x12 -#define TWL4030_MODULE_INT 0x13 -#define TWL4030_MODULE_PM_MASTER 0x14 -#define TWL4030_MODULE_PM_RECEIVER 0x15 -#define TWL4030_MODULE_RTC 0x16 -#define TWL4030_MODULE_SECURED_REG 0x17 +enum twl4030_module_ids { + TWL4030_MODULE_USB = 0, /* Slave 0 (i2c address 0x48) */ + TWL4030_MODULE_AUDIO_VOICE, /* Slave 1 (i2c address 0x49) */ + TWL4030_MODULE_GPIO, + TWL4030_MODULE_INTBR, + TWL4030_MODULE_PIH, + + TWL4030_MODULE_TEST, + TWL4030_MODULE_KEYPAD, /* Slave 2 (i2c address 0x4a) */ + TWL4030_MODULE_MADC, + TWL4030_MODULE_INTERRUPTS, + TWL4030_MODULE_LED, + + TWL4030_MODULE_MAIN_CHARGE, + TWL4030_MODULE_PRECHARGE, + TWL4030_MODULE_PWM0, + TWL4030_MODULE_PWM1, + TWL4030_MODULE_PWMA, + + TWL4030_MODULE_PWMB, + TWL5031_MODULE_ACCESSORY, + TWL5031_MODULE_INTERRUPTS, + TWL4030_MODULE_BACKUP, /* Slave 3 (i2c address 0x4b) */ + TWL4030_MODULE_INT, + + TWL4030_MODULE_PM_MASTER, + TWL4030_MODULE_PM_RECEIVER, + TWL4030_MODULE_RTC, + TWL4030_MODULE_SECURED_REG, + TWL4030_MODULE_LAST, +}; +/* Similar functionalities implemented in TWL4030/6030 */ #define TWL_MODULE_USB TWL4030_MODULE_USB -#define TWL_MODULE_AUDIO_VOICE TWL4030_MODULE_AUDIO_VOICE #define TWL_MODULE_PIH TWL4030_MODULE_PIH -#define TWL_MODULE_MADC TWL4030_MODULE_MADC #define TWL_MODULE_MAIN_CHARGE TWL4030_MODULE_MAIN_CHARGE #define TWL_MODULE_PM_MASTER TWL4030_MODULE_PM_MASTER #define TWL_MODULE_PM_RECEIVER TWL4030_MODULE_PM_RECEIVER #define TWL_MODULE_RTC TWL4030_MODULE_RTC #define TWL_MODULE_PWM TWL4030_MODULE_PWM0 +#define TWL_MODULE_LED TWL4030_MODULE_LED -#define TWL6030_MODULE_ID0 0x0D -#define TWL6030_MODULE_ID1 0x0E -#define TWL6030_MODULE_ID2 0x0F +#define TWL6030_MODULE_ID0 13 +#define TWL6030_MODULE_ID1 14 +#define TWL6030_MODULE_ID2 15 #define GPIO_INTR_OFFSET 0 #define KEYPAD_INTR_OFFSET 1 diff --git a/include/linux/idr.h b/include/linux/idr.h index 87259a44c251..de7e190f1af4 100644 --- a/include/linux/idr.h +++ b/include/linux/idr.h @@ -152,4 +152,15 @@ void ida_simple_remove(struct ida *ida, unsigned int id); void __init idr_init_cache(void); +/** + * idr_for_each_entry - iterate over an idr's elements of a given type + * @idp: idr handle + * @entry: the type * to use as cursor + * @id: id entry's key + */ +#define idr_for_each_entry(idp, entry, id) \ + for (id = 0, entry = (typeof(entry))idr_get_next((idp), &(id)); \ + entry != NULL; \ + ++id, entry = (typeof(entry))idr_get_next((idp), &(id))) + #endif /* __IDR_H__ */ diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 2385119f8bb0..f0859cc73861 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -131,6 +131,8 @@ #define IEEE80211_MAX_MESH_ID_LEN 32 +#define IEEE80211_NUM_TIDS 16 + #define IEEE80211_QOS_CTL_LEN 2 /* 1d tag mask */ #define IEEE80211_QOS_CTL_TAG1D_MASK 0x0007 @@ -666,6 +668,21 @@ struct ieee80211_meshconf_ie { } __attribute__ ((packed)); /** + * enum mesh_config_capab_flags - Mesh Configuration IE capability field flags + * + * @IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS: STA is willing to establish + * additional mesh peerings with other mesh STAs + * @IEEE80211_MESHCONF_CAPAB_FORWARDING: the STA forwards MSDUs + * @IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING: TBTT adjustment procedure + * is ongoing + */ +enum mesh_config_capab_flags { + IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS = 0x01, + IEEE80211_MESHCONF_CAPAB_FORWARDING = 0x08, + IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING = 0x20, +}; + +/** * struct ieee80211_rann_ie * * This structure refers to "Root Announcement information element" @@ -905,6 +922,38 @@ struct ieee80211_tdls_data { } u; } __packed; +/* + * Peer-to-Peer IE attribute related definitions. + */ +/** + * enum ieee80211_p2p_attr_id - identifies type of peer-to-peer attribute. + */ +enum ieee80211_p2p_attr_id { + IEEE80211_P2P_ATTR_STATUS = 0, + IEEE80211_P2P_ATTR_MINOR_REASON, + IEEE80211_P2P_ATTR_CAPABILITY, + IEEE80211_P2P_ATTR_DEVICE_ID, + IEEE80211_P2P_ATTR_GO_INTENT, + IEEE80211_P2P_ATTR_GO_CONFIG_TIMEOUT, + IEEE80211_P2P_ATTR_LISTEN_CHANNEL, + IEEE80211_P2P_ATTR_GROUP_BSSID, + IEEE80211_P2P_ATTR_EXT_LISTEN_TIMING, + IEEE80211_P2P_ATTR_INTENDED_IFACE_ADDR, + IEEE80211_P2P_ATTR_MANAGABILITY, + IEEE80211_P2P_ATTR_CHANNEL_LIST, + IEEE80211_P2P_ATTR_ABSENCE_NOTICE, + IEEE80211_P2P_ATTR_DEVICE_INFO, + IEEE80211_P2P_ATTR_GROUP_INFO, + IEEE80211_P2P_ATTR_GROUP_ID, + IEEE80211_P2P_ATTR_INTERFACE, + IEEE80211_P2P_ATTR_OPER_CHANNEL, + IEEE80211_P2P_ATTR_INVITE_FLAGS, + /* 19 - 220: Reserved */ + IEEE80211_P2P_ATTR_VENDOR_SPECIFIC = 221, + + IEEE80211_P2P_ATTR_MAX +}; + /** * struct ieee80211_bar - HT Block Ack Request * @@ -1107,20 +1156,6 @@ struct ieee80211_ht_operation { #define WLAN_HT_SMPS_CONTROL_STATIC 1 #define WLAN_HT_SMPS_CONTROL_DYNAMIC 3 -#define VHT_MCS_SUPPORTED_SET_SIZE 8 - -struct ieee80211_vht_capabilities { - __le32 vht_capabilities_info; - u8 vht_supported_mcs_set[VHT_MCS_SUPPORTED_SET_SIZE]; -} __packed; - -struct ieee80211_vht_operation { - u8 vht_op_info_chwidth; - u8 vht_op_info_chan_center_freq_seg1_idx; - u8 vht_op_info_chan_center_freq_seg2_idx; - __le16 vht_basic_mcs_set; -} __packed; - /** * struct ieee80211_vht_mcs_info - VHT MCS information * @rx_mcs_map: RX MCS map 2 bits for each stream, total 8 streams @@ -1128,11 +1163,13 @@ struct ieee80211_vht_operation { * STA can receive. Rate expressed in units of 1 Mbps. * If this field is 0 this value should not be used to * consider the highest RX data rate supported. + * The top 3 bits of this field are reserved. * @tx_mcs_map: TX MCS map 2 bits for each stream, total 8 streams * @tx_highest: Indicates highest long GI VHT PPDU data rate * STA can transmit. Rate expressed in units of 1 Mbps. * If this field is 0 this value should not be used to * consider the highest TX data rate supported. + * The top 3 bits of this field are reserved. */ struct ieee80211_vht_mcs_info { __le16 rx_mcs_map; @@ -1141,38 +1178,107 @@ struct ieee80211_vht_mcs_info { __le16 tx_highest; } __packed; +/** + * enum ieee80211_vht_mcs_support - VHT MCS support definitions + * @IEEE80211_VHT_MCS_SUPPORT_0_7: MCSes 0-7 are supported for the + * number of streams + * @IEEE80211_VHT_MCS_SUPPORT_0_8: MCSes 0-8 are supported + * @IEEE80211_VHT_MCS_SUPPORT_0_9: MCSes 0-9 are supported + * @IEEE80211_VHT_MCS_NOT_SUPPORTED: This number of streams isn't supported + * + * These definitions are used in each 2-bit subfield of the @rx_mcs_map + * and @tx_mcs_map fields of &struct ieee80211_vht_mcs_info, which are + * both split into 8 subfields by number of streams. These values indicate + * which MCSes are supported for the number of streams the value appears + * for. + */ +enum ieee80211_vht_mcs_support { + IEEE80211_VHT_MCS_SUPPORT_0_7 = 0, + IEEE80211_VHT_MCS_SUPPORT_0_8 = 1, + IEEE80211_VHT_MCS_SUPPORT_0_9 = 2, + IEEE80211_VHT_MCS_NOT_SUPPORTED = 3, +}; + +/** + * struct ieee80211_vht_cap - VHT capabilities + * + * This structure is the "VHT capabilities element" as + * described in 802.11ac D3.0 8.4.2.160 + * @vht_cap_info: VHT capability info + * @supp_mcs: VHT MCS supported rates + */ +struct ieee80211_vht_cap { + __le32 vht_cap_info; + struct ieee80211_vht_mcs_info supp_mcs; +} __packed; + +/** + * enum ieee80211_vht_chanwidth - VHT channel width + * @IEEE80211_VHT_CHANWIDTH_USE_HT: use the HT operation IE to + * determine the channel width (20 or 40 MHz) + * @IEEE80211_VHT_CHANWIDTH_80MHZ: 80 MHz bandwidth + * @IEEE80211_VHT_CHANWIDTH_160MHZ: 160 MHz bandwidth + * @IEEE80211_VHT_CHANWIDTH_80P80MHZ: 80+80 MHz bandwidth + */ +enum ieee80211_vht_chanwidth { + IEEE80211_VHT_CHANWIDTH_USE_HT = 0, + IEEE80211_VHT_CHANWIDTH_80MHZ = 1, + IEEE80211_VHT_CHANWIDTH_160MHZ = 2, + IEEE80211_VHT_CHANWIDTH_80P80MHZ = 3, +}; + +/** + * struct ieee80211_vht_operation - VHT operation IE + * + * This structure is the "VHT operation element" as + * described in 802.11ac D3.0 8.4.2.161 + * @chan_width: Operating channel width + * @center_freq_seg1_idx: center freq segment 1 index + * @center_freq_seg2_idx: center freq segment 2 index + * @basic_mcs_set: VHT Basic MCS rate set + */ +struct ieee80211_vht_operation { + u8 chan_width; + u8 center_freq_seg1_idx; + u8 center_freq_seg2_idx; + __le16 basic_mcs_set; +} __packed; + + #define IEEE80211_VHT_MCS_ZERO_TO_SEVEN_SUPPORT 0 #define IEEE80211_VHT_MCS_ZERO_TO_EIGHT_SUPPORT 1 #define IEEE80211_VHT_MCS_ZERO_TO_NINE_SUPPORT 2 #define IEEE80211_VHT_MCS_NOT_SUPPORTED 3 /* 802.11ac VHT Capabilities */ -#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895 0x00000000 -#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 0x00000001 -#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 0x00000002 -#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ 0x00000004 -#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ 0x00000008 -#define IEEE80211_VHT_CAP_RXLDPC 0x00000010 -#define IEEE80211_VHT_CAP_SHORT_GI_80 0x00000020 -#define IEEE80211_VHT_CAP_SHORT_GI_160 0x00000040 -#define IEEE80211_VHT_CAP_TXSTBC 0x00000080 -#define IEEE80211_VHT_CAP_RXSTBC_1 0x00000100 -#define IEEE80211_VHT_CAP_RXSTBC_2 0x00000200 -#define IEEE80211_VHT_CAP_RXSTBC_3 0x00000300 -#define IEEE80211_VHT_CAP_RXSTBC_4 0x00000400 -#define IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE 0x00000800 -#define IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE 0x00001000 -#define IEEE80211_VHT_CAP_BEAMFORMER_ANTENNAS_MAX 0x00006000 -#define IEEE80211_VHT_CAP_SOUNDING_DIMENTION_MAX 0x00030000 -#define IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE 0x00080000 -#define IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE 0x00100000 -#define IEEE80211_VHT_CAP_VHT_TXOP_PS 0x00200000 -#define IEEE80211_VHT_CAP_HTC_VHT 0x00400000 -#define IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT 0x00800000 -#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_UNSOL_MFB 0x08000000 -#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB 0x0c000000 -#define IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN 0x10000000 -#define IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN 0x20000000 +#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895 0x00000000 +#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 0x00000001 +#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 0x00000002 +#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ 0x00000004 +#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ 0x00000008 +#define IEEE80211_VHT_CAP_RXLDPC 0x00000010 +#define IEEE80211_VHT_CAP_SHORT_GI_80 0x00000020 +#define IEEE80211_VHT_CAP_SHORT_GI_160 0x00000040 +#define IEEE80211_VHT_CAP_TXSTBC 0x00000080 +#define IEEE80211_VHT_CAP_RXSTBC_1 0x00000100 +#define IEEE80211_VHT_CAP_RXSTBC_2 0x00000200 +#define IEEE80211_VHT_CAP_RXSTBC_3 0x00000300 +#define IEEE80211_VHT_CAP_RXSTBC_4 0x00000400 +#define IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE 0x00000800 +#define IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE 0x00001000 +#define IEEE80211_VHT_CAP_BEAMFORMER_ANTENNAS_MAX 0x00006000 +#define IEEE80211_VHT_CAP_SOUNDING_DIMENTION_MAX 0x00030000 +#define IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE 0x00080000 +#define IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE 0x00100000 +#define IEEE80211_VHT_CAP_VHT_TXOP_PS 0x00200000 +#define IEEE80211_VHT_CAP_HTC_VHT 0x00400000 +#define IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT 23 +#define IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK \ + (7 << IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT) +#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_UNSOL_MFB 0x08000000 +#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB 0x0c000000 +#define IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN 0x10000000 +#define IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN 0x20000000 /* Authentication algorithms */ #define WLAN_AUTH_OPEN 0 @@ -1440,8 +1546,6 @@ enum ieee80211_eid { WLAN_EID_RSN = 48, WLAN_EID_MMIE = 76, - WLAN_EID_WPA = 221, - WLAN_EID_GENERIC = 221, WLAN_EID_VENDOR_SPECIFIC = 221, WLAN_EID_QOS_PARAMETER = 222, diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h index 1cc595a67cc9..f4e56ecd0b1a 100644 --- a/include/linux/if_tunnel.h +++ b/include/linux/if_tunnel.h @@ -4,5 +4,22 @@ #include <linux/ip.h> #include <linux/in6.h> #include <uapi/linux/if_tunnel.h> +#include <linux/u64_stats_sync.h> + +/* + * Locking : hash tables are protected by RCU and RTNL + */ + +#define for_each_ip_tunnel_rcu(pos, start) \ + for (pos = rcu_dereference(start); pos; pos = rcu_dereference(pos->next)) + +/* often modified stats are per cpu, other are shared (netdev->stats) */ +struct pcpu_tstats { + u64 rx_packets; + u64 rx_bytes; + u64 tx_packets; + u64 tx_bytes; + struct u64_stats_sync syncp; +}; #endif /* _IF_TUNNEL_H_ */ diff --git a/include/linux/iio/buffer.h b/include/linux/iio/buffer.h index c629b3a1d9a9..f3eea18fdf46 100644 --- a/include/linux/iio/buffer.h +++ b/include/linux/iio/buffer.h @@ -66,7 +66,8 @@ struct iio_buffer_access_funcs { * @stufftoread: [INTERN] flag to indicate new data. * @demux_list: [INTERN] list of operations required to demux the scan. * @demux_bounce: [INTERN] buffer for doing gather from incoming scan. - **/ + * @buffer_list: [INTERN] entry in the devices list of current buffers. + */ struct iio_buffer { int length; int bytes_per_datum; @@ -81,9 +82,22 @@ struct iio_buffer { const struct attribute_group *attrs; struct list_head demux_list; unsigned char *demux_bounce; + struct list_head buffer_list; }; /** + * iio_update_buffers() - add or remove buffer from active list + * @indio_dev: device to add buffer to + * @insert_buffer: buffer to insert + * @remove_buffer: buffer_to_remove + * + * Note this will tear down the all buffering and build it up again + */ +int iio_update_buffers(struct iio_dev *indio_dev, + struct iio_buffer *insert_buffer, + struct iio_buffer *remove_buffer); + +/** * iio_buffer_init() - Initialize the buffer structure * @buffer: buffer to be initialized **/ @@ -115,11 +129,11 @@ int iio_scan_mask_set(struct iio_dev *indio_dev, struct iio_buffer *buffer, int bit); /** - * iio_push_to_buffer() - push to a registered buffer. - * @buffer: IIO buffer structure for device - * @data: the data to push to the buffer + * iio_push_to_buffers() - push to a registered buffer. + * @indio_dev: iio_dev structure for device. + * @data: Full scan. */ -int iio_push_to_buffer(struct iio_buffer *buffer, unsigned char *data); +int iio_push_to_buffers(struct iio_dev *indio_dev, unsigned char *data); int iio_update_demux(struct iio_dev *indio_dev); @@ -181,7 +195,7 @@ bool iio_validate_scan_mask_onehot(struct iio_dev *indio_dev, #else /* CONFIG_IIO_BUFFER */ static inline int iio_buffer_register(struct iio_dev *indio_dev, - struct iio_chan_spec *channels, + const struct iio_chan_spec *channels, int num_channels) { return 0; diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h index e875bcf0478f..16c35ac045bd 100644 --- a/include/linux/iio/consumer.h +++ b/include/linux/iio/consumer.h @@ -9,6 +9,8 @@ */ #ifndef _IIO_INKERN_CONSUMER_H_ #define _IIO_INKERN_CONSUMER_H_ + +#include <linux/types.h> #include <linux/iio/types.h> struct iio_dev; @@ -18,10 +20,12 @@ struct iio_chan_spec; * struct iio_channel - everything needed for a consumer to use a channel * @indio_dev: Device on which the channel exists. * @channel: Full description of the channel. + * @data: Data about the channel used by consumer. */ struct iio_channel { struct iio_dev *indio_dev; const struct iio_chan_spec *channel; + void *data; }; /** @@ -59,6 +63,52 @@ struct iio_channel *iio_channel_get_all(const char *name); */ void iio_channel_release_all(struct iio_channel *chan); +struct iio_cb_buffer; +/** + * iio_channel_get_all_cb() - register callback for triggered capture + * @name: Name of client device. + * @cb: Callback function. + * @private: Private data passed to callback. + * + * NB right now we have no ability to mux data from multiple devices. + * So if the channels requested come from different devices this will + * fail. + */ +struct iio_cb_buffer *iio_channel_get_all_cb(const char *name, + int (*cb)(u8 *data, + void *private), + void *private); +/** + * iio_channel_release_all_cb() - release and unregister the callback. + * @cb_buffer: The callback buffer that was allocated. + */ +void iio_channel_release_all_cb(struct iio_cb_buffer *cb_buffer); + +/** + * iio_channel_start_all_cb() - start the flow of data through callback. + * @cb_buff: The callback buffer we are starting. + */ +int iio_channel_start_all_cb(struct iio_cb_buffer *cb_buff); + +/** + * iio_channel_stop_all_cb() - stop the flow of data through the callback. + * @cb_buff: The callback buffer we are stopping. + */ +void iio_channel_stop_all_cb(struct iio_cb_buffer *cb_buff); + +/** + * iio_channel_cb_get_channels() - get access to the underlying channels. + * @cb_buff: The callback buffer from whom we want the channel + * information. + * + * This function allows one to obtain information about the channels. + * Whilst this may allow direct reading if all buffers are disabled, the + * primary aim is to allow drivers that are consuming a channel to query + * things like scaling of the channel. + */ +struct iio_channel +*iio_channel_cb_get_channels(const struct iio_cb_buffer *cb_buffer); + /** * iio_read_channel_raw() - read from a given channel * @chan: The channel being queried. diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h index c0ae76ac4e0b..da8c776ba0bd 100644 --- a/include/linux/iio/iio.h +++ b/include/linux/iio/iio.h @@ -410,6 +410,7 @@ struct iio_buffer_setup_ops { * and owner * @event_interface: [INTERN] event chrdevs associated with interrupt lines * @buffer: [DRIVER] any buffer present + * @buffer_list: [INTERN] list of all buffers currently attached * @scan_bytes: [INTERN] num bytes captured to be fed to buffer demux * @mlock: [INTERN] lock used to prevent simultaneous device state * changes @@ -448,6 +449,7 @@ struct iio_dev { struct iio_event_interface *event_interface; struct iio_buffer *buffer; + struct list_head buffer_list; int scan_bytes; struct mutex mlock; @@ -618,4 +620,23 @@ static inline struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev) }; #endif +int iio_str_to_fixpoint(const char *str, int fract_mult, int *integer, + int *fract); + +/** + * IIO_DEGREE_TO_RAD() - Convert degree to rad + * @deg: A value in degree + * + * Returns the given value converted from degree to rad + */ +#define IIO_DEGREE_TO_RAD(deg) (((deg) * 314159ULL + 9000000ULL) / 18000000ULL) + +/** + * IIO_G_TO_M_S_2() - Convert g to meter / second**2 + * @g: A value in g + * + * Returns the given value converted from g to meter / second**2 + */ +#define IIO_G_TO_M_S_2(g) ((g) * 980665ULL / 100000ULL) + #endif /* _INDUSTRIAL_IO_H_ */ diff --git a/include/linux/iio/imu/adis.h b/include/linux/iio/imu/adis.h new file mode 100644 index 000000000000..ff781dca2e9a --- /dev/null +++ b/include/linux/iio/imu/adis.h @@ -0,0 +1,280 @@ +/* + * Common library for ADIS16XXX devices + * + * Copyright 2012 Analog Devices Inc. + * Author: Lars-Peter Clausen <lars@metafoo.de> + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __IIO_ADIS_H__ +#define __IIO_ADIS_H__ + +#include <linux/spi/spi.h> +#include <linux/interrupt.h> +#include <linux/iio/types.h> + +#define ADIS_WRITE_REG(reg) ((0x80 | (reg))) +#define ADIS_READ_REG(reg) ((reg) & 0x7f) + +#define ADIS_PAGE_SIZE 0x80 +#define ADIS_REG_PAGE_ID 0x00 + +struct adis; + +/** + * struct adis_data - ADIS chip variant specific data + * @read_delay: SPI delay for read operations in us + * @write_delay: SPI delay for write operations in us + * @glob_cmd_reg: Register address of the GLOB_CMD register + * @msc_ctrl_reg: Register address of the MSC_CTRL register + * @diag_stat_reg: Register address of the DIAG_STAT register + * @status_error_msgs: Array of error messgaes + * @status_error_mask: + */ +struct adis_data { + unsigned int read_delay; + unsigned int write_delay; + + unsigned int glob_cmd_reg; + unsigned int msc_ctrl_reg; + unsigned int diag_stat_reg; + + unsigned int self_test_mask; + unsigned int startup_delay; + + const char * const *status_error_msgs; + unsigned int status_error_mask; + + int (*enable_irq)(struct adis *adis, bool enable); + + bool has_paging; +}; + +struct adis { + struct spi_device *spi; + struct iio_trigger *trig; + + const struct adis_data *data; + + struct mutex txrx_lock; + struct spi_message msg; + struct spi_transfer *xfer; + unsigned int current_page; + void *buffer; + + uint8_t tx[10] ____cacheline_aligned; + uint8_t rx[4]; +}; + +int adis_init(struct adis *adis, struct iio_dev *indio_dev, + struct spi_device *spi, const struct adis_data *data); +int adis_reset(struct adis *adis); + +int adis_write_reg(struct adis *adis, unsigned int reg, + unsigned int val, unsigned int size); +int adis_read_reg(struct adis *adis, unsigned int reg, + unsigned int *val, unsigned int size); + +/** + * adis_write_reg_8() - Write single byte to a register + * @adis: The adis device + * @reg: The address of the register to be written + * @value: The value to write + */ +static inline int adis_write_reg_8(struct adis *adis, unsigned int reg, + uint8_t val) +{ + return adis_write_reg(adis, reg, val, 1); +} + +/** + * adis_write_reg_16() - Write 2 bytes to a pair of registers + * @adis: The adis device + * @reg: The address of the lower of the two registers + * @value: Value to be written + */ +static inline int adis_write_reg_16(struct adis *adis, unsigned int reg, + uint16_t val) +{ + return adis_write_reg(adis, reg, val, 2); +} + +/** + * adis_write_reg_32() - write 4 bytes to four registers + * @adis: The adis device + * @reg: The address of the lower of the four register + * @value: Value to be written + */ +static inline int adis_write_reg_32(struct adis *adis, unsigned int reg, + uint32_t val) +{ + return adis_write_reg(adis, reg, val, 4); +} + +/** + * adis_read_reg_16() - read 2 bytes from a 16-bit register + * @adis: The adis device + * @reg: The address of the lower of the two registers + * @val: The value read back from the device + */ +static inline int adis_read_reg_16(struct adis *adis, unsigned int reg, + uint16_t *val) +{ + unsigned int tmp; + int ret; + + ret = adis_read_reg(adis, reg, &tmp, 2); + *val = tmp; + + return ret; +} + +/** + * adis_read_reg_32() - read 4 bytes from a 32-bit register + * @adis: The adis device + * @reg: The address of the lower of the two registers + * @val: The value read back from the device + */ +static inline int adis_read_reg_32(struct adis *adis, unsigned int reg, + uint32_t *val) +{ + unsigned int tmp; + int ret; + + ret = adis_read_reg(adis, reg, &tmp, 4); + *val = tmp; + + return ret; +} + +int adis_enable_irq(struct adis *adis, bool enable); +int adis_check_status(struct adis *adis); + +int adis_initial_startup(struct adis *adis); + +int adis_single_conversion(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, unsigned int error_mask, + int *val); + +#define ADIS_VOLTAGE_CHAN(addr, si, chan, name, bits) { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = (chan), \ + .extend_name = name, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \ + .address = (addr), \ + .scan_index = (si), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = (bits), \ + .storagebits = 16, \ + .endianness = IIO_BE, \ + }, \ +} + +#define ADIS_SUPPLY_CHAN(addr, si, bits) \ + ADIS_VOLTAGE_CHAN(addr, si, 0, "supply", bits) + +#define ADIS_AUX_ADC_CHAN(addr, si, bits) \ + ADIS_VOLTAGE_CHAN(addr, si, 1, NULL, bits) + +#define ADIS_TEMP_CHAN(addr, si, bits) { \ + .type = IIO_TEMP, \ + .indexed = 1, \ + .channel = 0, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SEPARATE_BIT | \ + IIO_CHAN_INFO_OFFSET_SEPARATE_BIT, \ + .address = (addr), \ + .scan_index = (si), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = (bits), \ + .storagebits = 16, \ + .endianness = IIO_BE, \ + }, \ +} + +#define ADIS_MOD_CHAN(_type, mod, addr, si, info, bits) { \ + .type = (_type), \ + .modified = 1, \ + .channel2 = IIO_MOD_ ## mod, \ + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \ + IIO_CHAN_INFO_SCALE_SHARED_BIT | \ + info, \ + .address = (addr), \ + .scan_index = (si), \ + .scan_type = { \ + .sign = 's', \ + .realbits = (bits), \ + .storagebits = 16, \ + .endianness = IIO_BE, \ + }, \ +} + +#define ADIS_ACCEL_CHAN(mod, addr, si, info, bits) \ + ADIS_MOD_CHAN(IIO_ACCEL, mod, addr, si, info, bits) + +#define ADIS_GYRO_CHAN(mod, addr, si, info, bits) \ + ADIS_MOD_CHAN(IIO_ANGL_VEL, mod, addr, si, info, bits) + +#define ADIS_INCLI_CHAN(mod, addr, si, info, bits) \ + ADIS_MOD_CHAN(IIO_INCLI, mod, addr, si, info, bits) + +#define ADIS_ROT_CHAN(mod, addr, si, info, bits) \ + ADIS_MOD_CHAN(IIO_ROT, mod, addr, si, info, bits) + +#ifdef CONFIG_IIO_ADIS_LIB_BUFFER + +int adis_setup_buffer_and_trigger(struct adis *adis, + struct iio_dev *indio_dev, irqreturn_t (*trigger_handler)(int, void *)); +void adis_cleanup_buffer_and_trigger(struct adis *adis, + struct iio_dev *indio_dev); + +int adis_probe_trigger(struct adis *adis, struct iio_dev *indio_dev); +void adis_remove_trigger(struct adis *adis); + +int adis_update_scan_mode(struct iio_dev *indio_dev, + const unsigned long *scan_mask); + +#else /* CONFIG_IIO_BUFFER */ + +static inline int adis_setup_buffer_and_trigger(struct adis *adis, + struct iio_dev *indio_dev, irqreturn_t (*trigger_handler)(int, void *)) +{ + return 0; +} + +static inline void adis_cleanup_buffer_and_trigger(struct adis *adis, + struct iio_dev *indio_dev) +{ +} + +static inline int adis_probe_trigger(struct adis *adis, + struct iio_dev *indio_dev) +{ + return 0; +} + +static inline void adis_remove_trigger(struct adis *adis) +{ +} + +#define adis_update_scan_mode NULL + +#endif /* CONFIG_IIO_BUFFER */ + +#ifdef CONFIG_DEBUG_FS + +int adis_debugfs_reg_access(struct iio_dev *indio_dev, + unsigned int reg, unsigned int writeval, unsigned int *readval); + +#else + +#define adis_debugfs_reg_access NULL + +#endif + +#endif diff --git a/include/linux/iio/machine.h b/include/linux/iio/machine.h index 809a3f08d5a5..1601a2a63a72 100644 --- a/include/linux/iio/machine.h +++ b/include/linux/iio/machine.h @@ -19,11 +19,13 @@ * @consumer_dev_name: Name to uniquely identify the consumer device. * @consumer_channel: Unique name used to identify the channel on the * consumer side. + * @consumer_data: Data about the channel for use by the consumer driver. */ struct iio_map { const char *adc_channel_label; const char *consumer_dev_name; const char *consumer_channel; + void *consumer_data; }; #endif diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h index 5c647ecfd5ba..88bf0f0d27b4 100644 --- a/include/linux/iio/types.h +++ b/include/linux/iio/types.h @@ -28,6 +28,7 @@ enum iio_chan_type { IIO_CAPACITANCE, IIO_ALTVOLTAGE, IIO_CCT, + IIO_PRESSURE, }; enum iio_modifier { @@ -58,5 +59,6 @@ enum iio_modifier { #define IIO_VAL_INT_PLUS_NANO 3 #define IIO_VAL_INT_PLUS_MICRO_DB 4 #define IIO_VAL_FRACTIONAL 10 +#define IIO_VAL_FRACTIONAL_LOG2 11 #endif /* _IIO_TYPES_H_ */ diff --git a/include/linux/ima.h b/include/linux/ima.h index 2c7223d7e73b..86c361e947b9 100644 --- a/include/linux/ima.h +++ b/include/linux/ima.h @@ -18,6 +18,7 @@ extern int ima_bprm_check(struct linux_binprm *bprm); extern int ima_file_check(struct file *file, int mask); extern void ima_file_free(struct file *file); extern int ima_file_mmap(struct file *file, unsigned long prot); +extern int ima_module_check(struct file *file); #else static inline int ima_bprm_check(struct linux_binprm *bprm) @@ -40,6 +41,11 @@ static inline int ima_file_mmap(struct file *file, unsigned long prot) return 0; } +static inline int ima_module_check(struct file *file) +{ + return 0; +} + #endif /* CONFIG_IMA_H */ #ifdef CONFIG_IMA_APPRAISE diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h index d032780d0ce5..a9d828976a77 100644 --- a/include/linux/inetdevice.h +++ b/include/linux/inetdevice.h @@ -171,6 +171,9 @@ struct in_ifaddr { extern int register_inetaddr_notifier(struct notifier_block *nb); extern int unregister_inetaddr_notifier(struct notifier_block *nb); +extern void inet_netconf_notify_devconf(struct net *net, int type, int ifindex, + struct ipv4_devconf *devconf); + extern struct net_device *__ip_dev_find(struct net *net, __be32 addr, bool devref); static inline struct net_device *ip_dev_find(struct net *net, __be32 addr) { diff --git a/include/linux/init.h b/include/linux/init.h index e59041e21df3..a799273714ac 100644 --- a/include/linux/init.h +++ b/include/linux/init.h @@ -93,13 +93,13 @@ #define __exit __section(.exit.text) __exitused __cold notrace -/* Used for HOTPLUG */ -#define __devinit __section(.devinit.text) __cold notrace -#define __devinitdata __section(.devinit.data) -#define __devinitconst __constsection(.devinit.rodata) -#define __devexit __section(.devexit.text) __exitused __cold notrace -#define __devexitdata __section(.devexit.data) -#define __devexitconst __constsection(.devexit.rodata) +/* Used for HOTPLUG, but that is always enabled now, so just make them noops */ +#define __devinit +#define __devinitdata +#define __devinitconst +#define __devexit +#define __devexitdata +#define __devexitconst /* Used for HOTPLUG_CPU */ #define __cpuinit __section(.cpuinit.text) __cold notrace @@ -126,10 +126,6 @@ #define __INITRODATA .section ".init.rodata","a",%progbits #define __FINITDATA .previous -#define __DEVINIT .section ".devinit.text", "ax" -#define __DEVINITDATA .section ".devinit.data", "aw" -#define __DEVINITRODATA .section ".devinit.rodata", "a" - #define __CPUINIT .section ".cpuinit.text", "ax" #define __CPUINITDATA .section ".cpuinit.data", "aw" #define __CPUINITRODATA .section ".cpuinit.rodata", "a" @@ -186,16 +182,16 @@ extern bool initcall_debug; * can point at the same handler without causing duplicate-symbol build errors. */ -#define __define_initcall(level,fn,id) \ +#define __define_initcall(fn, id) \ static initcall_t __initcall_##fn##id __used \ - __attribute__((__section__(".initcall" level ".init"))) = fn + __attribute__((__section__(".initcall" #id ".init"))) = fn /* * Early initcalls run before initializing SMP. * * Only for built-in code, not modules. */ -#define early_initcall(fn) __define_initcall("early",fn,early) +#define early_initcall(fn) __define_initcall(fn, early) /* * A "pure" initcall has no dependencies on anything else, and purely @@ -204,23 +200,23 @@ extern bool initcall_debug; * This only exists for built-in code, not for modules. * Keep main.c:initcall_level_names[] in sync. */ -#define pure_initcall(fn) __define_initcall("0",fn,0) - -#define core_initcall(fn) __define_initcall("1",fn,1) -#define core_initcall_sync(fn) __define_initcall("1s",fn,1s) -#define postcore_initcall(fn) __define_initcall("2",fn,2) -#define postcore_initcall_sync(fn) __define_initcall("2s",fn,2s) -#define arch_initcall(fn) __define_initcall("3",fn,3) -#define arch_initcall_sync(fn) __define_initcall("3s",fn,3s) -#define subsys_initcall(fn) __define_initcall("4",fn,4) -#define subsys_initcall_sync(fn) __define_initcall("4s",fn,4s) -#define fs_initcall(fn) __define_initcall("5",fn,5) -#define fs_initcall_sync(fn) __define_initcall("5s",fn,5s) -#define rootfs_initcall(fn) __define_initcall("rootfs",fn,rootfs) -#define device_initcall(fn) __define_initcall("6",fn,6) -#define device_initcall_sync(fn) __define_initcall("6s",fn,6s) -#define late_initcall(fn) __define_initcall("7",fn,7) -#define late_initcall_sync(fn) __define_initcall("7s",fn,7s) +#define pure_initcall(fn) __define_initcall(fn, 0) + +#define core_initcall(fn) __define_initcall(fn, 1) +#define core_initcall_sync(fn) __define_initcall(fn, 1s) +#define postcore_initcall(fn) __define_initcall(fn, 2) +#define postcore_initcall_sync(fn) __define_initcall(fn, 2s) +#define arch_initcall(fn) __define_initcall(fn, 3) +#define arch_initcall_sync(fn) __define_initcall(fn, 3s) +#define subsys_initcall(fn) __define_initcall(fn, 4) +#define subsys_initcall_sync(fn) __define_initcall(fn, 4s) +#define fs_initcall(fn) __define_initcall(fn, 5) +#define fs_initcall_sync(fn) __define_initcall(fn, 5s) +#define rootfs_initcall(fn) __define_initcall(fn, rootfs) +#define device_initcall(fn) __define_initcall(fn, 6) +#define device_initcall_sync(fn) __define_initcall(fn, 6s) +#define late_initcall(fn) __define_initcall(fn, 7) +#define late_initcall_sync(fn) __define_initcall(fn, 7s) #define __initcall(fn) device_initcall(fn) diff --git a/include/linux/input.h b/include/linux/input.h index cab994ba6d91..82ce323b9986 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -112,6 +112,11 @@ struct input_value { * @h_list: list of input handles associated with the device. When * accessing the list dev->mutex must be held * @node: used to place the device onto input_dev_list + * @num_vals: number of values queued in the current frame + * @max_vals: maximum number of values queued in a frame + * @vals: array of values queued in the current frame + * @devres_managed: indicates that devices is managed with devres framework + * and needs not be explicitly unregistered or freed. */ struct input_dev { const char *name; @@ -180,6 +185,8 @@ struct input_dev { unsigned int num_vals; unsigned int max_vals; struct input_value *vals; + + bool devres_managed; }; #define to_input_dev(d) container_of(d, struct input_dev, dev) @@ -323,7 +330,8 @@ struct input_handle { struct list_head h_node; }; -struct input_dev *input_allocate_device(void); +struct input_dev __must_check *input_allocate_device(void); +struct input_dev __must_check *devm_input_allocate_device(struct device *); void input_free_device(struct input_dev *dev); static inline struct input_dev *input_get_device(struct input_dev *dev) diff --git a/include/linux/input/bu21013.h b/include/linux/input/bu21013.h index 05e03284b92a..6230d76bde5d 100644 --- a/include/linux/input/bu21013.h +++ b/include/linux/input/bu21013.h @@ -9,13 +9,10 @@ /** * struct bu21013_platform_device - Handle the platform data - * @cs_en: pointer to the cs enable function - * @cs_dis: pointer to the cs disable function - * @irq_read_val: pointer to read the pen irq value function * @touch_x_max: touch x max * @touch_y_max: touch y max * @cs_pin: chip select pin - * @irq: irq pin + * @touch_pin: touch gpio pin * @ext_clk: external clock flag * @x_flip: x flip flag * @y_flip: y flip flag @@ -24,13 +21,10 @@ * This is used to handle the platform data */ struct bu21013_platform_device { - int (*cs_en)(int reset_pin); - int (*cs_dis)(int reset_pin); - int (*irq_read_val)(void); int touch_x_max; int touch_y_max; unsigned int cs_pin; - unsigned int irq; + unsigned int touch_pin; bool ext_clk; bool x_flip; bool y_flip; diff --git a/include/linux/input/mt.h b/include/linux/input/mt.h index cc5cca774bab..2e86bd0bfba1 100644 --- a/include/linux/input/mt.h +++ b/include/linux/input/mt.h @@ -69,6 +69,12 @@ static inline bool input_mt_is_active(const struct input_mt_slot *slot) return input_mt_get_value(slot, ABS_MT_TRACKING_ID) >= 0; } +static inline bool input_mt_is_used(const struct input_mt *mt, + const struct input_mt_slot *slot) +{ + return slot->frame == mt->frame; +} + int input_mt_init_slots(struct input_dev *dev, unsigned int num_slots, unsigned int flags); void input_mt_destroy_slots(struct input_dev *dev); diff --git a/include/linux/input/ti_am335x_tsc.h b/include/linux/input/ti_am335x_tsc.h new file mode 100644 index 000000000000..49269a2aa329 --- /dev/null +++ b/include/linux/input/ti_am335x_tsc.h @@ -0,0 +1,23 @@ +#ifndef __LINUX_TI_AM335X_TSC_H +#define __LINUX_TI_AM335X_TSC_H + +/** + * struct tsc_data Touchscreen wire configuration + * @wires: Wires refer to application modes + * i.e. 4/5/8 wire touchscreen support + * on the platform. + * @x_plate_resistance: X plate resistance. + * @steps_to_configure: The sequencer supports a total of + * 16 programmable steps. + * A step configured to read a single + * co-ordinate value, can be applied + * more number of times for better results. + */ + +struct tsc_data { + int wires; + int x_plate_resistance; + int steps_to_configure; +}; + +#endif diff --git a/include/linux/input/ti_tscadc.h b/include/linux/input/ti_tscadc.h deleted file mode 100644 index b10a527a92a4..000000000000 --- a/include/linux/input/ti_tscadc.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __LINUX_TI_TSCADC_H -#define __LINUX_TI_TSCADC_H - -/** - * struct tsc_data Touchscreen wire configuration - * @wires: Wires refer to application modes - * i.e. 4/5/8 wire touchscreen support - * on the platform. - * @x_plate_resistance: X plate resistance. - */ - -struct tsc_data { - int wires; - int x_plate_resistance; -}; - -#endif diff --git a/include/linux/ip.h b/include/linux/ip.h index 58b82a22a52b..492bc6513533 100644 --- a/include/linux/ip.h +++ b/include/linux/ip.h @@ -25,6 +25,11 @@ static inline struct iphdr *ip_hdr(const struct sk_buff *skb) return (struct iphdr *)skb_network_header(skb); } +static inline struct iphdr *inner_ip_hdr(const struct sk_buff *skb) +{ + return (struct iphdr *)skb_inner_network_header(skb); +} + static inline struct iphdr *ipip_hdr(const struct sk_buff *skb) { return (struct iphdr *)skb_transport_header(skb); diff --git a/include/linux/ipack.h b/include/linux/ipack.h new file mode 100644 index 000000000000..fea12cbb2aeb --- /dev/null +++ b/include/linux/ipack.h @@ -0,0 +1,245 @@ +/* + * Industry-pack bus. + * + * Copyright (C) 2011-2012 CERN (www.cern.ch) + * Author: Samuel Iglesias Gonsalvez <siglesias@igalia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2 of the License. + */ + +#include <linux/mod_devicetable.h> +#include <linux/device.h> +#include <linux/interrupt.h> + +#define IPACK_IDPROM_OFFSET_I 0x01 +#define IPACK_IDPROM_OFFSET_P 0x03 +#define IPACK_IDPROM_OFFSET_A 0x05 +#define IPACK_IDPROM_OFFSET_C 0x07 +#define IPACK_IDPROM_OFFSET_MANUFACTURER_ID 0x09 +#define IPACK_IDPROM_OFFSET_MODEL 0x0B +#define IPACK_IDPROM_OFFSET_REVISION 0x0D +#define IPACK_IDPROM_OFFSET_RESERVED 0x0F +#define IPACK_IDPROM_OFFSET_DRIVER_ID_L 0x11 +#define IPACK_IDPROM_OFFSET_DRIVER_ID_H 0x13 +#define IPACK_IDPROM_OFFSET_NUM_BYTES 0x15 +#define IPACK_IDPROM_OFFSET_CRC 0x17 + +/* + * IndustryPack Fromat, Vendor and Device IDs. + */ + +/* ID section format versions */ +#define IPACK_ID_VERSION_INVALID 0x00 +#define IPACK_ID_VERSION_1 0x01 +#define IPACK_ID_VERSION_2 0x02 + +/* Vendors and devices. Sort key: vendor first, device next. */ +#define IPACK1_VENDOR_ID_RESERVED1 0x00 +#define IPACK1_VENDOR_ID_RESERVED2 0xFF +#define IPACK1_VENDOR_ID_UNREGISTRED01 0x01 +#define IPACK1_VENDOR_ID_UNREGISTRED02 0x02 +#define IPACK1_VENDOR_ID_UNREGISTRED03 0x03 +#define IPACK1_VENDOR_ID_UNREGISTRED04 0x04 +#define IPACK1_VENDOR_ID_UNREGISTRED05 0x05 +#define IPACK1_VENDOR_ID_UNREGISTRED06 0x06 +#define IPACK1_VENDOR_ID_UNREGISTRED07 0x07 +#define IPACK1_VENDOR_ID_UNREGISTRED08 0x08 +#define IPACK1_VENDOR_ID_UNREGISTRED09 0x09 +#define IPACK1_VENDOR_ID_UNREGISTRED10 0x0A +#define IPACK1_VENDOR_ID_UNREGISTRED11 0x0B +#define IPACK1_VENDOR_ID_UNREGISTRED12 0x0C +#define IPACK1_VENDOR_ID_UNREGISTRED13 0x0D +#define IPACK1_VENDOR_ID_UNREGISTRED14 0x0E +#define IPACK1_VENDOR_ID_UNREGISTRED15 0x0F + +#define IPACK1_VENDOR_ID_SBS 0xF0 +#define IPACK1_DEVICE_ID_SBS_OCTAL_232 0x22 +#define IPACK1_DEVICE_ID_SBS_OCTAL_422 0x2A +#define IPACK1_DEVICE_ID_SBS_OCTAL_485 0x48 + +struct ipack_bus_ops; +struct ipack_driver; + +enum ipack_space { + IPACK_IO_SPACE = 0, + IPACK_ID_SPACE, + IPACK_INT_SPACE, + IPACK_MEM8_SPACE, + IPACK_MEM16_SPACE, + /* Dummy for counting the number of entries. Must remain the last + * entry */ + IPACK_SPACE_COUNT, +}; + +/** + */ +struct ipack_region { + phys_addr_t start; + size_t size; +}; + +/** + * struct ipack_device + * + * @slot: Slot where the device is plugged in the carrier board + * @bus: ipack_bus_device where the device is plugged to. + * @id_space: Virtual address to ID space. + * @io_space: Virtual address to IO space. + * @mem_space: Virtual address to MEM space. + * @dev: device in kernel representation. + * + * Warning: Direct access to mapped memory is possible but the endianness + * is not the same with PCI carrier or VME carrier. The endianness is managed + * by the carrier board throught bus->ops. + */ +struct ipack_device { + unsigned int slot; + struct ipack_bus_device *bus; + struct device dev; + void (*release) (struct ipack_device *dev); + struct ipack_region region[IPACK_SPACE_COUNT]; + u8 *id; + size_t id_avail; + u32 id_vendor; + u32 id_device; + u8 id_format; + unsigned int id_crc_correct:1; + unsigned int speed_8mhz:1; + unsigned int speed_32mhz:1; +}; + +/** + * struct ipack_driver_ops -- Callbacks to IPack device driver + * + * @probe: Probe function + * @remove: Prepare imminent removal of the device. Services provided by the + * device should be revoked. + */ + +struct ipack_driver_ops { + int (*probe) (struct ipack_device *dev); + void (*remove) (struct ipack_device *dev); +}; + +/** + * struct ipack_driver -- Specific data to each ipack device driver + * + * @driver: Device driver kernel representation + * @ops: Callbacks provided by the IPack device driver + */ +struct ipack_driver { + struct device_driver driver; + const struct ipack_device_id *id_table; + const struct ipack_driver_ops *ops; +}; + +/** + * struct ipack_bus_ops - available operations on a bridge module + * + * @map_space: map IP address space + * @unmap_space: unmap IP address space + * @request_irq: request IRQ + * @free_irq: free IRQ + * @get_clockrate: Returns the clockrate the carrier is currently + * communicating with the device at. + * @set_clockrate: Sets the clock-rate for carrier / module communication. + * Should return -EINVAL if the requested speed is not supported. + * @get_error: Returns the error state for the slot the device is attached + * to. + * @get_timeout: Returns 1 if the communication with the device has + * previously timed out. + * @reset_timeout: Resets the state returned by get_timeout. + */ +struct ipack_bus_ops { + int (*request_irq) (struct ipack_device *dev, + irqreturn_t (*handler)(void *), void *arg); + int (*free_irq) (struct ipack_device *dev); + int (*get_clockrate) (struct ipack_device *dev); + int (*set_clockrate) (struct ipack_device *dev, int mherz); + int (*get_error) (struct ipack_device *dev); + int (*get_timeout) (struct ipack_device *dev); + int (*reset_timeout) (struct ipack_device *dev); +}; + +/** + * struct ipack_bus_device + * + * @dev: pointer to carrier device + * @slots: number of slots available + * @bus_nr: ipack bus number + * @ops: bus operations for the mezzanine drivers + */ +struct ipack_bus_device { + struct device *parent; + int slots; + int bus_nr; + const struct ipack_bus_ops *ops; +}; + +/** + * ipack_bus_register -- register a new ipack bus + * + * @parent: pointer to the parent device, if any. + * @slots: number of slots available in the bus device. + * @ops: bus operations for the mezzanine drivers. + * + * The carrier board device should call this function to register itself as + * available bus device in ipack. + */ +struct ipack_bus_device *ipack_bus_register(struct device *parent, int slots, + const struct ipack_bus_ops *ops); + +/** + * ipack_bus_unregister -- unregister an ipack bus + */ +int ipack_bus_unregister(struct ipack_bus_device *bus); + +/** + * ipack_driver_register -- Register a new ipack device driver + * + * Called by a ipack driver to register itself as a driver + * that can manage ipack devices. + */ +int ipack_driver_register(struct ipack_driver *edrv, struct module *owner, + const char *name); +void ipack_driver_unregister(struct ipack_driver *edrv); + +/** + * ipack_device_register -- register an IPack device with the kernel + * @dev: the new device to register. + * + * Register a new IPack device ("module" in IndustryPack jargon). The call + * is done by the carrier driver. The carrier should populate the fields + * bus and slot as well as the region array of @dev prior to calling this + * function. The rest of the fields will be allocated and populated + * during registration. + * + * Return zero on success or error code on failure. + */ +int ipack_device_register(struct ipack_device *dev); +void ipack_device_unregister(struct ipack_device *dev); + +/** + * DEFINE_IPACK_DEVICE_TABLE - macro used to describe a IndustryPack table + * @_table: device table name + * + * This macro is used to create a struct ipack_device_id array (a device table) + * in a generic manner. + */ +#define DEFINE_IPACK_DEVICE_TABLE(_table) \ + const struct ipack_device_id _table[] +/** + * IPACK_DEVICE - macro used to describe a specific IndustryPack device + * @_format: the format version (currently either 1 or 2, 8 bit value) + * @vend: the 8 or 24 bit IndustryPack Vendor ID + * @dev: the 8 or 16 bit IndustryPack Device ID + * + * This macro is used to create a struct ipack_device_id that matches a specific + * device. + */ +#define IPACK_DEVICE(_format, vend, dev) \ + .format = (_format), \ + .vendor = (vend), \ + .device = (dev) diff --git a/include/linux/ipc_namespace.h b/include/linux/ipc_namespace.h index 5499c92a9153..fe771978e877 100644 --- a/include/linux/ipc_namespace.h +++ b/include/linux/ipc_namespace.h @@ -67,6 +67,8 @@ struct ipc_namespace { /* user_ns which owns the ipc ns */ struct user_namespace *user_ns; + + unsigned int proc_inum; }; extern struct ipc_namespace init_ipc_ns; @@ -133,7 +135,8 @@ static inline int mq_init_ns(struct ipc_namespace *ns) { return 0; } #if defined(CONFIG_IPC_NS) extern struct ipc_namespace *copy_ipcs(unsigned long flags, - struct task_struct *tsk); + struct user_namespace *user_ns, struct ipc_namespace *ns); + static inline struct ipc_namespace *get_ipc_ns(struct ipc_namespace *ns) { if (ns) @@ -144,12 +147,12 @@ static inline struct ipc_namespace *get_ipc_ns(struct ipc_namespace *ns) extern void put_ipc_ns(struct ipc_namespace *ns); #else static inline struct ipc_namespace *copy_ipcs(unsigned long flags, - struct task_struct *tsk) + struct user_namespace *user_ns, struct ipc_namespace *ns) { if (flags & CLONE_NEWIPC) return ERR_PTR(-EINVAL); - return tsk->nsproxy->ipc_ns; + return ns; } static inline struct ipc_namespace *get_ipc_ns(struct ipc_namespace *ns) diff --git a/include/linux/ipmi_smi.h b/include/linux/ipmi_smi.h index fcb5d44ea635..8ea3fe0b9759 100644 --- a/include/linux/ipmi_smi.h +++ b/include/linux/ipmi_smi.h @@ -216,7 +216,7 @@ int ipmi_unregister_smi(ipmi_smi_t intf); /* * The lower layer reports received messages through this interface. - * The data_size should be zero if this is an asyncronous message. If + * The data_size should be zero if this is an asynchronous message. If * the lower layer gets an error sending a message, it should format * an error response in the message response. */ diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index bcba48a97868..faed1e357dd6 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -47,6 +47,7 @@ struct ipv6_devconf { __s32 disable_ipv6; __s32 accept_dad; __s32 force_tllao; + __s32 ndisc_notify; void *sysctl; }; @@ -66,6 +67,11 @@ static inline struct ipv6hdr *ipv6_hdr(const struct sk_buff *skb) return (struct ipv6hdr *)skb_network_header(skb); } +static inline struct ipv6hdr *inner_ipv6_hdr(const struct sk_buff *skb) +{ + return (struct ipv6hdr *)skb_inner_network_header(skb); +} + static inline struct ipv6hdr *ipipv6_hdr(const struct sk_buff *skb) { return (struct ipv6hdr *)skb_transport_header(skb); @@ -363,20 +369,22 @@ static inline struct raw6_sock *raw6_sk(const struct sock *sk) #define inet_v6_ipv6only(__sk) 0 #endif /* IS_ENABLED(CONFIG_IPV6) */ -#define INET6_MATCH(__sk, __net, __hash, __saddr, __daddr, __ports, __dif)\ - (((__sk)->sk_hash == (__hash)) && sock_net((__sk)) == (__net) && \ - ((*((__portpair *)&(inet_sk(__sk)->inet_dport))) == (__ports)) && \ - ((__sk)->sk_family == AF_INET6) && \ - ipv6_addr_equal(&inet6_sk(__sk)->daddr, (__saddr)) && \ - ipv6_addr_equal(&inet6_sk(__sk)->rcv_saddr, (__daddr)) && \ - (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif)))) - -#define INET6_TW_MATCH(__sk, __net, __hash, __saddr, __daddr, __ports, __dif) \ - (((__sk)->sk_hash == (__hash)) && sock_net((__sk)) == (__net) && \ - (*((__portpair *)&(inet_twsk(__sk)->tw_dport)) == (__ports)) && \ - ((__sk)->sk_family == PF_INET6) && \ - (ipv6_addr_equal(&inet6_twsk(__sk)->tw_v6_daddr, (__saddr))) && \ - (ipv6_addr_equal(&inet6_twsk(__sk)->tw_v6_rcv_saddr, (__daddr))) && \ - (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif)))) +#define INET6_MATCH(__sk, __net, __saddr, __daddr, __ports, __dif) \ + ((inet_sk(__sk)->inet_portpair == (__ports)) && \ + ((__sk)->sk_family == AF_INET6) && \ + ipv6_addr_equal(&inet6_sk(__sk)->daddr, (__saddr)) && \ + ipv6_addr_equal(&inet6_sk(__sk)->rcv_saddr, (__daddr)) && \ + (!(__sk)->sk_bound_dev_if || \ + ((__sk)->sk_bound_dev_if == (__dif))) && \ + net_eq(sock_net(__sk), (__net))) + +#define INET6_TW_MATCH(__sk, __net, __saddr, __daddr, __ports, __dif) \ + ((inet_twsk(__sk)->tw_portpair == (__ports)) && \ + ((__sk)->sk_family == AF_INET6) && \ + ipv6_addr_equal(&inet6_twsk(__sk)->tw_v6_daddr, (__saddr)) && \ + ipv6_addr_equal(&inet6_twsk(__sk)->tw_v6_rcv_saddr, (__daddr)) && \ + (!(__sk)->sk_bound_dev_if || \ + ((__sk)->sk_bound_dev_if == (__dif))) && \ + net_eq(sock_net(__sk), (__net))) #endif /* _IPV6_H */ diff --git a/include/linux/irq.h b/include/linux/irq.h index 216b0ba109d7..fdf2c4a238cc 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -10,9 +10,6 @@ */ #include <linux/smp.h> - -#ifndef CONFIG_S390 - #include <linux/linkage.h> #include <linux/cache.h> #include <linux/spinlock.h> @@ -392,6 +389,15 @@ static inline void irq_move_masked_irq(struct irq_data *data) { } extern int no_irq_affinity; +#ifdef CONFIG_HARDIRQS_SW_RESEND +int irq_set_parent(int irq, int parent_irq); +#else +static inline int irq_set_parent(int irq, int parent_irq) +{ + return 0; +} +#endif + /* * Built-in IRQ handlers for various IRQ types, * callable via desc->handle_irq() @@ -737,8 +743,11 @@ static inline void irq_gc_lock(struct irq_chip_generic *gc) { } static inline void irq_gc_unlock(struct irq_chip_generic *gc) { } #endif -#endif /* CONFIG_GENERIC_HARDIRQS */ +#else /* !CONFIG_GENERIC_HARDIRQS */ -#endif /* !CONFIG_S390 */ +extern struct msi_desc *irq_get_msi_desc(unsigned int irq); +extern int irq_set_msi_desc(unsigned int irq, struct msi_desc *entry); + +#endif /* CONFIG_GENERIC_HARDIRQS */ #endif /* _LINUX_IRQ_H */ diff --git a/include/linux/irqchip/spear-shirq.h b/include/linux/irqchip/spear-shirq.h new file mode 100644 index 000000000000..c8be16d213a3 --- /dev/null +++ b/include/linux/irqchip/spear-shirq.h @@ -0,0 +1,64 @@ +/* + * SPEAr platform shared irq layer header file + * + * Copyright (C) 2009-2012 ST Microelectronics + * Viresh Kumar <viresh.linux@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __SPEAR_SHIRQ_H +#define __SPEAR_SHIRQ_H + +#include <linux/irq.h> +#include <linux/types.h> + +/* + * struct shirq_regs: shared irq register configuration + * + * enb_reg: enable register offset + * reset_to_enb: val 1 indicates, we need to clear bit for enabling interrupt + * status_reg: status register offset + * status_reg_mask: status register valid mask + * clear_reg: clear register offset + * reset_to_clear: val 1 indicates, we need to clear bit for clearing interrupt + */ +struct shirq_regs { + u32 enb_reg; + u32 reset_to_enb; + u32 status_reg; + u32 clear_reg; + u32 reset_to_clear; +}; + +/* + * struct spear_shirq: shared irq structure + * + * irq: hardware irq number + * irq_base: base irq in linux domain + * irq_nr: no. of shared interrupts in a particular block + * irq_bit_off: starting bit offset in the status register + * invalid_irq: irq group is currently disabled + * base: base address of shared irq register + * regs: register configuration for shared irq block + */ +struct spear_shirq { + u32 irq; + u32 irq_base; + u32 irq_nr; + u32 irq_bit_off; + int invalid_irq; + void __iomem *base; + struct shirq_regs regs; +}; + +int __init spear300_shirq_of_init(struct device_node *np, + struct device_node *parent); +int __init spear310_shirq_of_init(struct device_node *np, + struct device_node *parent); +int __init spear320_shirq_of_init(struct device_node *np, + struct device_node *parent); + +#endif /* __SPEAR_SHIRQ_H */ diff --git a/include/linux/irqchip/sunxi.h b/include/linux/irqchip/sunxi.h new file mode 100644 index 000000000000..1fe2c2260e2b --- /dev/null +++ b/include/linux/irqchip/sunxi.h @@ -0,0 +1,27 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_IRQCHIP_SUNXI_H +#define __LINUX_IRQCHIP_SUNXI_H + +#include <asm/exception.h> + +extern void sunxi_init_irq(void); + +extern asmlinkage void __exception_irq_entry sunxi_handle_irq( + struct pt_regs *regs); + +#endif diff --git a/include/linux/irqchip/versatile-fpga.h b/include/linux/irqchip/versatile-fpga.h new file mode 100644 index 000000000000..1fac9651d3ca --- /dev/null +++ b/include/linux/irqchip/versatile-fpga.h @@ -0,0 +1,13 @@ +#ifndef PLAT_FPGA_IRQ_H +#define PLAT_FPGA_IRQ_H + +struct device_node; +struct pt_regs; + +void fpga_handle_irq(struct pt_regs *regs); +void fpga_irq_init(void __iomem *, const char *, int, int, u32, + struct device_node *node); +int fpga_irq_of_init(struct device_node *node, + struct device_node *parent); + +#endif diff --git a/include/linux/irqdesc.h b/include/linux/irqdesc.h index 0ba014c55056..623325e2ff97 100644 --- a/include/linux/irqdesc.h +++ b/include/linux/irqdesc.h @@ -11,6 +11,8 @@ struct irq_affinity_notify; struct proc_dir_entry; struct module; +struct irq_desc; + /** * struct irq_desc - interrupt descriptor * @irq_data: per irq and chip data passed down to chip functions @@ -65,6 +67,7 @@ struct irq_desc { #ifdef CONFIG_PROC_FS struct proc_dir_entry *dir; #endif + int parent_irq; struct module *owner; const char *name; } ____cacheline_internodealigned_in_smp; diff --git a/include/linux/isdn/Kbuild b/include/linux/isdn/Kbuild deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/include/linux/isdn/Kbuild +++ /dev/null diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index 3efc43f3f162..1be23d9fdacb 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -1096,7 +1096,6 @@ extern int jbd2_journal_get_undo_access(handle_t *, struct buffer_head *); void jbd2_journal_set_triggers(struct buffer_head *, struct jbd2_buffer_trigger_type *type); extern int jbd2_journal_dirty_metadata (handle_t *, struct buffer_head *); -extern void jbd2_journal_release_buffer (handle_t *, struct buffer_head *); extern int jbd2_journal_forget (handle_t *, struct buffer_head *); extern void journal_sync_buffer (struct buffer_head *); extern void jbd2_journal_invalidatepage(journal_t *, @@ -1303,15 +1302,21 @@ static inline int jbd_space_needed(journal_t *journal) extern int jbd_blocks_per_page(struct inode *inode); +/* JBD uses a CRC32 checksum */ +#define JBD_MAX_CHECKSUM_SIZE 4 + static inline u32 jbd2_chksum(journal_t *journal, u32 crc, const void *address, unsigned int length) { struct { struct shash_desc shash; - char ctx[crypto_shash_descsize(journal->j_chksum_driver)]; + char ctx[JBD_MAX_CHECKSUM_SIZE]; } desc; int err; + BUG_ON(crypto_shash_descsize(journal->j_chksum_driver) > + JBD_MAX_CHECKSUM_SIZE); + desc.shash.tfm = journal->j_chksum_driver; desc.shash.flags = 0; *(u32 *)desc.ctx = crc; diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h index 6b87413da9d6..82ed068b1ebe 100644 --- a/include/linux/jiffies.h +++ b/include/linux/jiffies.h @@ -70,11 +70,12 @@ extern int register_refined_jiffies(long clock_tick_rate); /* * The 64-bit value is not atomic - you MUST NOT read it - * without sampling the sequence number in xtime_lock. + * without sampling the sequence number in jiffies_lock. * get_jiffies_64() will do this for you as appropriate. */ extern u64 __jiffy_data jiffies_64; extern unsigned long volatile __jiffy_data jiffies; +extern seqlock_t jiffies_lock; #if (BITS_PER_LONG < 64) u64 get_jiffies_64(void); diff --git a/include/linux/kernel.h b/include/linux/kernel.h index a123b13b70fd..d140e8fb075f 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -220,6 +220,23 @@ int __must_check _kstrtol(const char *s, unsigned int base, long *res); int __must_check kstrtoull(const char *s, unsigned int base, unsigned long long *res); int __must_check kstrtoll(const char *s, unsigned int base, long long *res); + +/** + * kstrtoul - convert a string to an unsigned long + * @s: The start of the string. The string must be null-terminated, and may also + * include a single newline before its terminating null. The first character + * may also be a plus sign, but not a minus sign. + * @base: The number base to use. The maximum supported base is 16. If base is + * given as 0, then the base of the string is automatically detected with the + * conventional semantics - If it begins with 0x the number will be parsed as a + * hexadecimal (case insensitive), if it otherwise begins with 0, it will be + * parsed as an octal number. Otherwise it will be parsed as a decimal. + * @res: Where to write the result of the conversion on success. + * + * Returns 0 on success, -ERANGE on overflow and -EINVAL on parsing error. + * Used as a replacement for the obsolete simple_strtoull. Return code must + * be checked. +*/ static inline int __must_check kstrtoul(const char *s, unsigned int base, unsigned long *res) { /* @@ -233,6 +250,22 @@ static inline int __must_check kstrtoul(const char *s, unsigned int base, unsign return _kstrtoul(s, base, res); } +/** + * kstrtol - convert a string to a long + * @s: The start of the string. The string must be null-terminated, and may also + * include a single newline before its terminating null. The first character + * may also be a plus sign or a minus sign. + * @base: The number base to use. The maximum supported base is 16. If base is + * given as 0, then the base of the string is automatically detected with the + * conventional semantics - If it begins with 0x the number will be parsed as a + * hexadecimal (case insensitive), if it otherwise begins with 0, it will be + * parsed as an octal number. Otherwise it will be parsed as a decimal. + * @res: Where to write the result of the conversion on success. + * + * Returns 0 on success, -ERANGE on overflow and -EINVAL on parsing error. + * Used as a replacement for the obsolete simple_strtoull. Return code must + * be checked. + */ static inline int __must_check kstrtol(const char *s, unsigned int base, long *res) { /* @@ -527,9 +560,6 @@ __ftrace_vprintk(unsigned long ip, const char *fmt, va_list ap); extern void ftrace_dump(enum ftrace_dump_mode oops_dump_mode); #else -static inline __printf(1, 2) -int trace_printk(const char *fmt, ...); - static inline void tracing_start(void) { } static inline void tracing_stop(void) { } static inline void ftrace_off_permanent(void) { } @@ -539,8 +569,8 @@ static inline void tracing_on(void) { } static inline void tracing_off(void) { } static inline int tracing_is_on(void) { return 0; } -static inline int -trace_printk(const char *fmt, ...) +static inline __printf(1, 2) +int trace_printk(const char *fmt, ...) { return 0; } @@ -687,18 +717,11 @@ static inline void ftrace_dump(enum ftrace_dump_mode oops_dump_mode) { } /* Trap pasters of __FUNCTION__ at compile-time */ #define __FUNCTION__ (__func__) -/* This helps us to avoid #ifdef CONFIG_NUMA */ -#ifdef CONFIG_NUMA -#define NUMA_BUILD 1 -#else -#define NUMA_BUILD 0 -#endif - -/* This helps us avoid #ifdef CONFIG_COMPACTION */ -#ifdef CONFIG_COMPACTION -#define COMPACTION_BUILD 1 +/* This helps us to avoid #ifdef CONFIG_SYMBOL_PREFIX */ +#ifdef CONFIG_SYMBOL_PREFIX +#define SYMBOL_PREFIX CONFIG_SYMBOL_PREFIX #else -#define COMPACTION_BUILD 0 +#define SYMBOL_PREFIX "" #endif /* Rebuild everything on CONFIG_FTRACE_MCOUNT_RECORD */ diff --git a/include/linux/kernel_stat.h b/include/linux/kernel_stat.h index 36d12f0884c3..66b70780e910 100644 --- a/include/linux/kernel_stat.h +++ b/include/linux/kernel_stat.h @@ -7,6 +7,7 @@ #include <linux/cpumask.h> #include <linux/interrupt.h> #include <linux/sched.h> +#include <linux/vtime.h> #include <asm/irq.h> #include <asm/cputime.h> @@ -126,16 +127,16 @@ extern void account_system_time(struct task_struct *, int, cputime_t, cputime_t) extern void account_steal_time(cputime_t); extern void account_idle_time(cputime_t); -extern void account_process_tick(struct task_struct *, int user); -extern void account_steal_ticks(unsigned long ticks); -extern void account_idle_ticks(unsigned long ticks); - #ifdef CONFIG_VIRT_CPU_ACCOUNTING -extern void vtime_task_switch(struct task_struct *prev); -extern void vtime_account_system(struct task_struct *tsk); -extern void vtime_account_idle(struct task_struct *tsk); +static inline void account_process_tick(struct task_struct *tsk, int user) +{ + vtime_account_user(tsk); +} #else -static inline void vtime_task_switch(struct task_struct *prev) { } +extern void account_process_tick(struct task_struct *, int user); #endif +extern void account_steal_ticks(unsigned long ticks); +extern void account_idle_ticks(unsigned long ticks); + #endif /* _LINUX_KERNEL_STAT_H */ diff --git a/include/linux/key.h b/include/linux/key.h index 2393b1c040b6..4dfde1161c5e 100644 --- a/include/linux/key.h +++ b/include/linux/key.h @@ -265,6 +265,7 @@ extern int key_unlink(struct key *keyring, extern struct key *keyring_alloc(const char *description, kuid_t uid, kgid_t gid, const struct cred *cred, + key_perm_t perm, unsigned long flags, struct key *dest); diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 1e57449395b1..939b11268c86 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -203,7 +203,6 @@ extern struct kobject *power_kobj; /* The global /sys/firmware/ kobject for people to chain off of */ extern struct kobject *firmware_kobj; -#if defined(CONFIG_HOTPLUG) int kobject_uevent(struct kobject *kobj, enum kobject_action action); int kobject_uevent_env(struct kobject *kobj, enum kobject_action action, char *envp[]); @@ -213,22 +212,5 @@ int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...); int kobject_action_type(const char *buf, size_t count, enum kobject_action *type); -#else -static inline int kobject_uevent(struct kobject *kobj, - enum kobject_action action) -{ return 0; } -static inline int kobject_uevent_env(struct kobject *kobj, - enum kobject_action action, - char *envp[]) -{ return 0; } - -static inline __printf(2, 3) -int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...) -{ return -ENOMEM; } - -static inline int kobject_action_type(const char *buf, size_t count, - enum kobject_action *type) -{ return -EINVAL; } -#endif #endif /* _KOBJECT_H_ */ diff --git a/include/linux/kref.h b/include/linux/kref.h index 65af6887872f..4972e6e9ca93 100644 --- a/include/linux/kref.h +++ b/include/linux/kref.h @@ -111,4 +111,25 @@ static inline int kref_put_mutex(struct kref *kref, } return 0; } + +/** + * kref_get_unless_zero - Increment refcount for object unless it is zero. + * @kref: object. + * + * Return non-zero if the increment succeeded. Otherwise return 0. + * + * This function is intended to simplify locking around refcounting for + * objects that can be looked up from a lookup structure, and which are + * removed from that lookup structure in the object destructor. + * Operations on such objects require at least a read lock around + * lookup + kref_get, and a write lock around kref_put + remove from lookup + * structure. Furthermore, RCU implementations become extremely tricky. + * With a lookup followed by a kref_get_unless_zero *with return value check* + * locking in the kref_put path can be deferred to the actual removal from + * the lookup structure and RCU lookups become trivial. + */ +static inline int __must_check kref_get_unless_zero(struct kref *kref) +{ + return atomic_add_unless(&kref->refcount, 1, 0); +} #endif /* _KREF_H_ */ diff --git a/include/linux/ktime.h b/include/linux/ktime.h index 06177ba10a16..e83512f63df5 100644 --- a/include/linux/ktime.h +++ b/include/linux/ktime.h @@ -282,6 +282,25 @@ static inline int ktime_equal(const ktime_t cmp1, const ktime_t cmp2) return cmp1.tv64 == cmp2.tv64; } +/** + * ktime_compare - Compares two ktime_t variables for less, greater or equal + * @cmp1: comparable1 + * @cmp2: comparable2 + * + * Returns ... + * cmp1 < cmp2: return <0 + * cmp1 == cmp2: return 0 + * cmp1 > cmp2: return >0 + */ +static inline int ktime_compare(const ktime_t cmp1, const ktime_t cmp2) +{ + if (cmp1.tv64 < cmp2.tv64) + return -1; + if (cmp1.tv64 > cmp2.tv64) + return 1; + return 0; +} + static inline s64 ktime_to_us(const ktime_t kt) { struct timeval tv = ktime_to_timeval(kt); diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 93bfc9f9815c..2c497ab0d03d 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -42,44 +42,45 @@ */ #define KVM_MEMSLOT_INVALID (1UL << 16) -/* - * If we support unaligned MMIO, at most one fragment will be split into two: - */ -#ifdef KVM_UNALIGNED_MMIO -# define KVM_EXTRA_MMIO_FRAGMENTS 1 -#else -# define KVM_EXTRA_MMIO_FRAGMENTS 0 -#endif - -#define KVM_USER_MMIO_SIZE 8 - -#define KVM_MAX_MMIO_FRAGMENTS \ - (KVM_MMIO_SIZE / KVM_USER_MMIO_SIZE + KVM_EXTRA_MMIO_FRAGMENTS) +/* Two fragments for cross MMIO pages. */ +#define KVM_MAX_MMIO_FRAGMENTS 2 /* * For the normal pfn, the highest 12 bits should be zero, - * so we can mask these bits to indicate the error. + * so we can mask bit 62 ~ bit 52 to indicate the error pfn, + * mask bit 63 to indicate the noslot pfn. */ -#define KVM_PFN_ERR_MASK (0xfffULL << 52) +#define KVM_PFN_ERR_MASK (0x7ffULL << 52) +#define KVM_PFN_ERR_NOSLOT_MASK (0xfffULL << 52) +#define KVM_PFN_NOSLOT (0x1ULL << 63) #define KVM_PFN_ERR_FAULT (KVM_PFN_ERR_MASK) #define KVM_PFN_ERR_HWPOISON (KVM_PFN_ERR_MASK + 1) -#define KVM_PFN_ERR_BAD (KVM_PFN_ERR_MASK + 2) -#define KVM_PFN_ERR_RO_FAULT (KVM_PFN_ERR_MASK + 3) +#define KVM_PFN_ERR_RO_FAULT (KVM_PFN_ERR_MASK + 2) +/* + * error pfns indicate that the gfn is in slot but faild to + * translate it to pfn on host. + */ static inline bool is_error_pfn(pfn_t pfn) { return !!(pfn & KVM_PFN_ERR_MASK); } -static inline bool is_noslot_pfn(pfn_t pfn) +/* + * error_noslot pfns indicate that the gfn can not be + * translated to pfn - it is not in slot or failed to + * translate it to pfn. + */ +static inline bool is_error_noslot_pfn(pfn_t pfn) { - return pfn == KVM_PFN_ERR_BAD; + return !!(pfn & KVM_PFN_ERR_NOSLOT_MASK); } -static inline bool is_invalid_pfn(pfn_t pfn) +/* noslot pfn indicates that the gfn is not in slot. */ +static inline bool is_noslot_pfn(pfn_t pfn) { - return !is_noslot_pfn(pfn) && is_error_pfn(pfn); + return pfn == KVM_PFN_NOSLOT; } #define KVM_HVA_ERR_BAD (PAGE_OFFSET) @@ -118,6 +119,9 @@ static inline bool is_error_page(struct page *page) #define KVM_REQ_IMMEDIATE_EXIT 15 #define KVM_REQ_PMU 16 #define KVM_REQ_PMI 17 +#define KVM_REQ_WATCHDOG 18 +#define KVM_REQ_MASTERCLOCK_UPDATE 19 +#define KVM_REQ_MCLOCK_INPROGRESS 20 #define KVM_USERSPACE_IRQ_SOURCE_ID 0 #define KVM_IRQFD_RESAMPLE_IRQ_SOURCE_ID 1 @@ -527,6 +531,7 @@ void kvm_put_guest_fpu(struct kvm_vcpu *vcpu); void kvm_flush_remote_tlbs(struct kvm *kvm); void kvm_reload_remote_mmus(struct kvm *kvm); +void kvm_make_mclock_inprogress_request(struct kvm *kvm); long kvm_arch_dev_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg); @@ -580,9 +585,9 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu); void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu); struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id); int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu); +int kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu); void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu); -int kvm_arch_vcpu_reset(struct kvm_vcpu *vcpu); int kvm_arch_hardware_enable(void *garbage); void kvm_arch_hardware_disable(void *garbage); int kvm_arch_hardware_setup(void); @@ -677,6 +682,7 @@ void kvm_get_intr_delivery_bitmask(struct kvm_ioapic *ioapic, unsigned long *deliver_bitmask); #endif int kvm_set_irq(struct kvm *kvm, int irq_source_id, u32 irq, int level); +int kvm_set_irq_inatomic(struct kvm *kvm, int irq_source_id, u32 irq, int level); int kvm_set_msi(struct kvm_kernel_irq_routing_entry *irq_entry, struct kvm *kvm, int irq_source_id, int level); void kvm_notify_acked_irq(struct kvm *kvm, unsigned irqchip, unsigned pin); @@ -737,7 +743,11 @@ static inline int kvm_deassign_device(struct kvm *kvm, static inline void kvm_guest_enter(void) { BUG_ON(preemptible()); - vtime_account(current); + /* + * This is running in ioctl context so we can avoid + * the call to vtime_account() with its unnecessary idle check. + */ + vtime_account_system_irqsafe(current); current->flags |= PF_VCPU; /* KVM does not hold any references to rcu protected data when it * switches CPU into a guest mode. In fact switching to a guest mode @@ -751,7 +761,11 @@ static inline void kvm_guest_enter(void) static inline void kvm_guest_exit(void) { - vtime_account(current); + /* + * This is running in ioctl context so we can avoid + * the call to vtime_account() with its unnecessary idle check. + */ + vtime_account_system_irqsafe(current); current->flags &= ~PF_VCPU; } @@ -841,9 +855,9 @@ extern struct kvm_stats_debugfs_item debugfs_entries[]; extern struct dentry *kvm_debugfs_dir; #if defined(CONFIG_MMU_NOTIFIER) && defined(KVM_ARCH_WANT_MMU_NOTIFIER) -static inline int mmu_notifier_retry(struct kvm_vcpu *vcpu, unsigned long mmu_seq) +static inline int mmu_notifier_retry(struct kvm *kvm, unsigned long mmu_seq) { - if (unlikely(vcpu->kvm->mmu_notifier_count)) + if (unlikely(kvm->mmu_notifier_count)) return 1; /* * Ensure the read of mmu_notifier_count happens before the read @@ -856,7 +870,7 @@ static inline int mmu_notifier_retry(struct kvm_vcpu *vcpu, unsigned long mmu_se * can't rely on kvm->mmu_lock to keep things ordered. */ smp_rmb(); - if (vcpu->kvm->mmu_notifier_seq != mmu_seq) + if (kvm->mmu_notifier_seq != mmu_seq) return 1; return 0; } @@ -884,10 +898,20 @@ static inline void kvm_free_irq_routing(struct kvm *kvm) {} #ifdef CONFIG_HAVE_KVM_EVENTFD void kvm_eventfd_init(struct kvm *kvm); +int kvm_ioeventfd(struct kvm *kvm, struct kvm_ioeventfd *args); + +#ifdef CONFIG_HAVE_KVM_IRQCHIP int kvm_irqfd(struct kvm *kvm, struct kvm_irqfd *args); void kvm_irqfd_release(struct kvm *kvm); void kvm_irq_routing_update(struct kvm *, struct kvm_irq_routing_table *); -int kvm_ioeventfd(struct kvm *kvm, struct kvm_ioeventfd *args); +#else +static inline int kvm_irqfd(struct kvm *kvm, struct kvm_irqfd *args) +{ + return -EINVAL; +} + +static inline void kvm_irqfd_release(struct kvm *kvm) {} +#endif #else diff --git a/include/linux/leds.h b/include/linux/leds.h index 6e53bb31c220..0d9b5eed714e 100644 --- a/include/linux/leds.h +++ b/include/linux/leds.h @@ -179,6 +179,23 @@ extern void led_trigger_blink_oneshot(struct led_trigger *trigger, unsigned long *delay_on, unsigned long *delay_off, int invert); +/** + * led_trigger_rename_static - rename a trigger + * @name: the new trigger name + * @trig: the LED trigger to rename + * + * Change a LED trigger name by copying the string passed in + * name into current trigger name, which MUST be large + * enough for the new string. + * + * Note that name must NOT point to the same string used + * during LED registration, as that could lead to races. + * + * This is meant to be used on triggers with statically + * allocated name. + */ +extern void led_trigger_rename_static(const char *name, + struct led_trigger *trig); #else diff --git a/include/linux/libata.h b/include/linux/libata.h index 77eeeda2b6e2..83ba0ab2c915 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -163,6 +163,7 @@ enum { ATA_DFLAG_DA = (1 << 26), /* device supports Device Attention */ ATA_DFLAG_DEVSLP = (1 << 27), /* device supports Device Sleep */ + ATA_DFLAG_ACPI_DISABLED = (1 << 28), /* ACPI for the device is disabled */ ATA_DEV_UNKNOWN = 0, /* unknown device */ ATA_DEV_ATA = 1, /* ATA device */ @@ -1114,6 +1115,10 @@ extern int ata_pci_device_resume(struct pci_dev *pdev); #endif /* CONFIG_PM */ #endif /* CONFIG_PCI */ +struct platform_device; + +extern int ata_platform_remove_one(struct platform_device *pdev); + /* * ACPI - drivers/ata/libata-acpi.c */ diff --git a/include/linux/loop.h b/include/linux/loop.h index 6492181bcb1d..460b60fa7adf 100644 --- a/include/linux/loop.h +++ b/include/linux/loop.h @@ -53,10 +53,13 @@ struct loop_device { spinlock_t lo_lock; struct bio_list lo_bio_list; + unsigned int lo_bio_count; int lo_state; struct mutex lo_ctl_mutex; struct task_struct *lo_thread; wait_queue_head_t lo_event; + /* wait queue for incoming requests */ + wait_queue_head_t lo_req_wait; struct request_queue *lo_queue; struct gendisk *lo_disk; diff --git a/include/linux/lru_cache.h b/include/linux/lru_cache.h index 7a71ffad037c..4019013c6593 100644 --- a/include/linux/lru_cache.h +++ b/include/linux/lru_cache.h @@ -52,8 +52,8 @@ We replicate IO (more or less synchronously) to local and remote disk. For crash recovery after replication node failure, we need to resync all regions that have been target of in-flight WRITE IO - (in use, or "hot", regions), as we don't know wether or not those WRITEs have - made it to stable storage. + (in use, or "hot", regions), as we don't know whether or not those WRITEs + have made it to stable storage. To avoid a "full resync", we need to persistently track these regions. @@ -166,9 +166,11 @@ struct lc_element { /* if we want to track a larger set of objects, * it needs to become arch independend u64 */ unsigned lc_number; - /* special label when on free list */ #define LC_FREE (~0U) + + /* for pending changes */ + unsigned lc_new_number; }; struct lru_cache { @@ -176,6 +178,7 @@ struct lru_cache { struct list_head lru; struct list_head free; struct list_head in_use; + struct list_head to_be_changed; /* the pre-created kmem cache to allocate the objects from */ struct kmem_cache *lc_cache; @@ -186,7 +189,7 @@ struct lru_cache { size_t element_off; /* number of elements (indices) */ - unsigned int nr_elements; + unsigned int nr_elements; /* Arbitrary limit on maximum tracked objects. Practical limit is much * lower due to allocation failures, probably. For typical use cases, * nr_elements should be a few thousand at most. @@ -194,18 +197,19 @@ struct lru_cache { * 8 high bits of .lc_index to be overloaded with flags in the future. */ #define LC_MAX_ACTIVE (1<<24) + /* allow to accumulate a few (index:label) changes, + * but no more than max_pending_changes */ + unsigned int max_pending_changes; + /* number of elements currently on to_be_changed list */ + unsigned int pending_changes; + /* statistics */ - unsigned used; /* number of lelements currently on in_use list */ - unsigned long hits, misses, starving, dirty, changed; + unsigned used; /* number of elements currently on in_use list */ + unsigned long hits, misses, starving, locked, changed; /* see below: flag-bits for lru_cache */ unsigned long flags; - /* when changing the label of an index element */ - unsigned int new_number; - - /* for paranoia when changing the label of an index element */ - struct lc_element *changing_element; void *lc_private; const char *name; @@ -221,10 +225,15 @@ enum { /* debugging aid, to catch concurrent access early. * user needs to guarantee exclusive access by proper locking! */ __LC_PARANOIA, - /* if we need to change the set, but currently there is a changing - * transaction pending, we are "dirty", and must deferr further - * changing requests */ + + /* annotate that the set is "dirty", possibly accumulating further + * changes, until a transaction is finally triggered */ __LC_DIRTY, + + /* Locked, no further changes allowed. + * Also used to serialize changing transactions. */ + __LC_LOCKED, + /* if we need to change the set, but currently there is no free nor * unused element available, we are "starving", and must not give out * further references, to guarantee that eventually some refcnt will @@ -236,9 +245,11 @@ enum { }; #define LC_PARANOIA (1<<__LC_PARANOIA) #define LC_DIRTY (1<<__LC_DIRTY) +#define LC_LOCKED (1<<__LC_LOCKED) #define LC_STARVING (1<<__LC_STARVING) extern struct lru_cache *lc_create(const char *name, struct kmem_cache *cache, + unsigned max_pending_changes, unsigned e_count, size_t e_size, size_t e_off); extern void lc_reset(struct lru_cache *lc); extern void lc_destroy(struct lru_cache *lc); @@ -249,7 +260,7 @@ extern struct lc_element *lc_try_get(struct lru_cache *lc, unsigned int enr); extern struct lc_element *lc_find(struct lru_cache *lc, unsigned int enr); extern struct lc_element *lc_get(struct lru_cache *lc, unsigned int enr); extern unsigned int lc_put(struct lru_cache *lc, struct lc_element *e); -extern void lc_changed(struct lru_cache *lc, struct lc_element *e); +extern void lc_committed(struct lru_cache *lc); struct seq_file; extern size_t lc_seq_printf_stats(struct seq_file *seq, struct lru_cache *lc); @@ -258,32 +269,40 @@ extern void lc_seq_dump_details(struct seq_file *seq, struct lru_cache *lc, char void (*detail) (struct seq_file *, struct lc_element *)); /** - * lc_try_lock - can be used to stop lc_get() from changing the tracked set + * lc_try_lock_for_transaction - can be used to stop lc_get() from changing the tracked set * @lc: the lru cache to operate on * - * Note that the reference counts and order on the active and lru lists may - * still change. Returns true if we acquired the lock. + * Allows (expects) the set to be "dirty". Note that the reference counts and + * order on the active and lru lists may still change. Used to serialize + * changing transactions. Returns true if we aquired the lock. */ -static inline int lc_try_lock(struct lru_cache *lc) +static inline int lc_try_lock_for_transaction(struct lru_cache *lc) { - return !test_and_set_bit(__LC_DIRTY, &lc->flags); + return !test_and_set_bit(__LC_LOCKED, &lc->flags); } /** + * lc_try_lock - variant to stop lc_get() from changing the tracked set + * @lc: the lru cache to operate on + * + * Note that the reference counts and order on the active and lru lists may + * still change. Only works on a "clean" set. Returns true if we aquired the + * lock, which means there are no pending changes, and any further attempt to + * change the set will not succeed until the next lc_unlock(). + */ +extern int lc_try_lock(struct lru_cache *lc); + +/** * lc_unlock - unlock @lc, allow lc_get() to change the set again * @lc: the lru cache to operate on */ static inline void lc_unlock(struct lru_cache *lc) { clear_bit(__LC_DIRTY, &lc->flags); - smp_mb__after_clear_bit(); + clear_bit_unlock(__LC_LOCKED, &lc->flags); } -static inline int lc_is_used(struct lru_cache *lc, unsigned int enr) -{ - struct lc_element *e = lc_find(lc, enr); - return e && e->refcnt; -} +extern bool lc_is_used(struct lru_cache *lc, unsigned int enr); #define lc_entry(ptr, type, member) \ container_of(ptr, type, member) diff --git a/include/linux/memblock.h b/include/linux/memblock.h index 569d67d4243e..d452ee191066 100644 --- a/include/linux/memblock.h +++ b/include/linux/memblock.h @@ -57,6 +57,7 @@ int memblock_add(phys_addr_t base, phys_addr_t size); int memblock_remove(phys_addr_t base, phys_addr_t size); int memblock_free(phys_addr_t base, phys_addr_t size); int memblock_reserve(phys_addr_t base, phys_addr_t size); +void memblock_trim_memory(phys_addr_t align); #ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP void __next_mem_pfn_range(int *idx, int nid, unsigned long *out_start_pfn, diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 11ddc7ffeba8..0108a56f814e 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -21,11 +21,14 @@ #define _LINUX_MEMCONTROL_H #include <linux/cgroup.h> #include <linux/vm_event_item.h> +#include <linux/hardirq.h> +#include <linux/jump_label.h> struct mem_cgroup; struct page_cgroup; struct page; struct mm_struct; +struct kmem_cache; /* Stats that can be updated by kernel. */ enum mem_cgroup_page_stat_item { @@ -181,7 +184,14 @@ unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order, gfp_t gfp_mask, unsigned long *total_scanned); -void mem_cgroup_count_vm_event(struct mm_struct *mm, enum vm_event_item idx); +void __mem_cgroup_count_vm_event(struct mm_struct *mm, enum vm_event_item idx); +static inline void mem_cgroup_count_vm_event(struct mm_struct *mm, + enum vm_event_item idx) +{ + if (mem_cgroup_disabled()) + return; + __mem_cgroup_count_vm_event(mm, idx); +} #ifdef CONFIG_TRANSPARENT_HUGEPAGE void mem_cgroup_split_huge_fixup(struct page *head); #endif @@ -407,5 +417,211 @@ static inline void sock_release_memcg(struct sock *sk) { } #endif /* CONFIG_INET && CONFIG_MEMCG_KMEM */ + +#ifdef CONFIG_MEMCG_KMEM +extern struct static_key memcg_kmem_enabled_key; + +extern int memcg_limited_groups_array_size; + +/* + * Helper macro to loop through all memcg-specific caches. Callers must still + * check if the cache is valid (it is either valid or NULL). + * the slab_mutex must be held when looping through those caches + */ +#define for_each_memcg_cache_index(_idx) \ + for ((_idx) = 0; i < memcg_limited_groups_array_size; (_idx)++) + +static inline bool memcg_kmem_enabled(void) +{ + return static_key_false(&memcg_kmem_enabled_key); +} + +/* + * In general, we'll do everything in our power to not incur in any overhead + * for non-memcg users for the kmem functions. Not even a function call, if we + * can avoid it. + * + * Therefore, we'll inline all those functions so that in the best case, we'll + * see that kmemcg is off for everybody and proceed quickly. If it is on, + * we'll still do most of the flag checking inline. We check a lot of + * conditions, but because they are pretty simple, they are expected to be + * fast. + */ +bool __memcg_kmem_newpage_charge(gfp_t gfp, struct mem_cgroup **memcg, + int order); +void __memcg_kmem_commit_charge(struct page *page, + struct mem_cgroup *memcg, int order); +void __memcg_kmem_uncharge_pages(struct page *page, int order); + +int memcg_cache_id(struct mem_cgroup *memcg); +int memcg_register_cache(struct mem_cgroup *memcg, struct kmem_cache *s, + struct kmem_cache *root_cache); +void memcg_release_cache(struct kmem_cache *cachep); +void memcg_cache_list_add(struct mem_cgroup *memcg, struct kmem_cache *cachep); + +int memcg_update_cache_size(struct kmem_cache *s, int num_groups); +void memcg_update_array_size(int num_groups); + +struct kmem_cache * +__memcg_kmem_get_cache(struct kmem_cache *cachep, gfp_t gfp); + +void mem_cgroup_destroy_cache(struct kmem_cache *cachep); +void kmem_cache_destroy_memcg_children(struct kmem_cache *s); + +/** + * memcg_kmem_newpage_charge: verify if a new kmem allocation is allowed. + * @gfp: the gfp allocation flags. + * @memcg: a pointer to the memcg this was charged against. + * @order: allocation order. + * + * returns true if the memcg where the current task belongs can hold this + * allocation. + * + * We return true automatically if this allocation is not to be accounted to + * any memcg. + */ +static inline bool +memcg_kmem_newpage_charge(gfp_t gfp, struct mem_cgroup **memcg, int order) +{ + if (!memcg_kmem_enabled()) + return true; + + /* + * __GFP_NOFAIL allocations will move on even if charging is not + * possible. Therefore we don't even try, and have this allocation + * unaccounted. We could in theory charge it with + * res_counter_charge_nofail, but we hope those allocations are rare, + * and won't be worth the trouble. + */ + if (!(gfp & __GFP_KMEMCG) || (gfp & __GFP_NOFAIL)) + return true; + if (in_interrupt() || (!current->mm) || (current->flags & PF_KTHREAD)) + return true; + + /* If the test is dying, just let it go. */ + if (unlikely(fatal_signal_pending(current))) + return true; + + return __memcg_kmem_newpage_charge(gfp, memcg, order); +} + +/** + * memcg_kmem_uncharge_pages: uncharge pages from memcg + * @page: pointer to struct page being freed + * @order: allocation order. + * + * there is no need to specify memcg here, since it is embedded in page_cgroup + */ +static inline void +memcg_kmem_uncharge_pages(struct page *page, int order) +{ + if (memcg_kmem_enabled()) + __memcg_kmem_uncharge_pages(page, order); +} + +/** + * memcg_kmem_commit_charge: embeds correct memcg in a page + * @page: pointer to struct page recently allocated + * @memcg: the memcg structure we charged against + * @order: allocation order. + * + * Needs to be called after memcg_kmem_newpage_charge, regardless of success or + * failure of the allocation. if @page is NULL, this function will revert the + * charges. Otherwise, it will commit the memcg given by @memcg to the + * corresponding page_cgroup. + */ +static inline void +memcg_kmem_commit_charge(struct page *page, struct mem_cgroup *memcg, int order) +{ + if (memcg_kmem_enabled() && memcg) + __memcg_kmem_commit_charge(page, memcg, order); +} + +/** + * memcg_kmem_get_cache: selects the correct per-memcg cache for allocation + * @cachep: the original global kmem cache + * @gfp: allocation flags. + * + * This function assumes that the task allocating, which determines the memcg + * in the page allocator, belongs to the same cgroup throughout the whole + * process. Misacounting can happen if the task calls memcg_kmem_get_cache() + * while belonging to a cgroup, and later on changes. This is considered + * acceptable, and should only happen upon task migration. + * + * Before the cache is created by the memcg core, there is also a possible + * imbalance: the task belongs to a memcg, but the cache being allocated from + * is the global cache, since the child cache is not yet guaranteed to be + * ready. This case is also fine, since in this case the GFP_KMEMCG will not be + * passed and the page allocator will not attempt any cgroup accounting. + */ +static __always_inline struct kmem_cache * +memcg_kmem_get_cache(struct kmem_cache *cachep, gfp_t gfp) +{ + if (!memcg_kmem_enabled()) + return cachep; + if (gfp & __GFP_NOFAIL) + return cachep; + if (in_interrupt() || (!current->mm) || (current->flags & PF_KTHREAD)) + return cachep; + if (unlikely(fatal_signal_pending(current))) + return cachep; + + return __memcg_kmem_get_cache(cachep, gfp); +} +#else +#define for_each_memcg_cache_index(_idx) \ + for (; NULL; ) + +static inline bool memcg_kmem_enabled(void) +{ + return false; +} + +static inline bool +memcg_kmem_newpage_charge(gfp_t gfp, struct mem_cgroup **memcg, int order) +{ + return true; +} + +static inline void memcg_kmem_uncharge_pages(struct page *page, int order) +{ +} + +static inline void +memcg_kmem_commit_charge(struct page *page, struct mem_cgroup *memcg, int order) +{ +} + +static inline int memcg_cache_id(struct mem_cgroup *memcg) +{ + return -1; +} + +static inline int +memcg_register_cache(struct mem_cgroup *memcg, struct kmem_cache *s, + struct kmem_cache *root_cache) +{ + return 0; +} + +static inline void memcg_release_cache(struct kmem_cache *cachep) +{ +} + +static inline void memcg_cache_list_add(struct mem_cgroup *memcg, + struct kmem_cache *s) +{ +} + +static inline struct kmem_cache * +memcg_kmem_get_cache(struct kmem_cache *cachep, gfp_t gfp) +{ + return cachep; +} + +static inline void kmem_cache_destroy_memcg_children(struct kmem_cache *s) +{ +} +#endif /* CONFIG_MEMCG_KMEM */ #endif /* _LINUX_MEMCONTROL_H */ diff --git a/include/linux/memory.h b/include/linux/memory.h index ff9a9f8e0ed9..45e93b468878 100644 --- a/include/linux/memory.h +++ b/include/linux/memory.h @@ -53,6 +53,8 @@ int arch_get_memory_phys_device(unsigned long start_pfn); struct memory_notify { unsigned long start_pfn; unsigned long nr_pages; + int status_change_nid_normal; + int status_change_nid_high; int status_change_nid; }; diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h index 95573ec4ee6c..4a45c4e50025 100644 --- a/include/linux/memory_hotplug.h +++ b/include/linux/memory_hotplug.h @@ -26,6 +26,13 @@ enum { MEMORY_HOTPLUG_MAX_BOOTMEM_TYPE = NODE_INFO, }; +/* Types for control the zone type of onlined memory */ +enum { + ONLINE_KEEP, + ONLINE_KERNEL, + ONLINE_MOVABLE, +}; + /* * pgdat resizing functions */ @@ -46,6 +53,10 @@ void pgdat_resize_init(struct pglist_data *pgdat) } /* * Zone resizing functions + * + * Note: any attempt to resize a zone should has pgdat_resize_lock() + * zone_span_writelock() both held. This ensure the size of a zone + * can't be changed while pgdat_resize_lock() held. */ static inline unsigned zone_span_seqbegin(struct zone *zone) { @@ -71,7 +82,7 @@ extern int zone_grow_free_lists(struct zone *zone, unsigned long new_nr_pages); extern int zone_grow_waitqueues(struct zone *zone, unsigned long nr_pages); extern int add_one_highpage(struct page *page, int pfn, int bad_ppro); /* VM interface that may be used by firmware interface */ -extern int online_pages(unsigned long, unsigned long); +extern int online_pages(unsigned long, unsigned long, int); extern void __offline_isolated_pages(unsigned long, unsigned long); typedef void (*online_page_callback_t)(struct page *page); diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h index e5ccb9ddd90e..9adc270de7ef 100644 --- a/include/linux/mempolicy.h +++ b/include/linux/mempolicy.h @@ -82,16 +82,6 @@ static inline void mpol_cond_put(struct mempolicy *pol) __mpol_put(pol); } -extern struct mempolicy *__mpol_cond_copy(struct mempolicy *tompol, - struct mempolicy *frompol); -static inline struct mempolicy *mpol_cond_copy(struct mempolicy *tompol, - struct mempolicy *frompol) -{ - if (!frompol) - return frompol; - return __mpol_cond_copy(tompol, frompol); -} - extern struct mempolicy *__mpol_dup(struct mempolicy *pol); static inline struct mempolicy *mpol_dup(struct mempolicy *pol) { @@ -198,6 +188,8 @@ static inline int vma_migratable(struct vm_area_struct *vma) return 1; } +extern int mpol_misplaced(struct page *, struct vm_area_struct *, unsigned long); + #else struct mempolicy {}; @@ -215,12 +207,6 @@ static inline void mpol_cond_put(struct mempolicy *pol) { } -static inline struct mempolicy *mpol_cond_copy(struct mempolicy *to, - struct mempolicy *from) -{ - return from; -} - static inline void mpol_get(struct mempolicy *pol) { } @@ -323,5 +309,11 @@ static inline int mpol_to_str(char *buffer, int maxlen, struct mempolicy *pol, return 0; } +static inline int mpol_misplaced(struct page *page, struct vm_area_struct *vma, + unsigned long address) +{ + return -1; /* no node preference */ +} + #endif /* CONFIG_NUMA */ #endif diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h index a0ca0dca1244..478672ed0c3d 100644 --- a/include/linux/mfd/88pm80x.h +++ b/include/linux/mfd/88pm80x.h @@ -364,6 +364,6 @@ static inline int pm80x_dev_resume(struct device *dev) #endif extern int pm80x_init(struct i2c_client *client, - const struct i2c_device_id *id) __devinit; + const struct i2c_device_id *id); extern int pm80x_deinit(struct i2c_client *client); #endif /* __LINUX_MFD_88PM80X_H */ diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h index 5d5298d56026..2138bd33021a 100644 --- a/include/linux/mfd/abx500.h +++ b/include/linux/mfd/abx500.h @@ -267,39 +267,21 @@ struct abx500_bm_data { int gnd_lift_resistance; const struct abx500_maxim_parameters *maxi; const struct abx500_bm_capacity_levels *cap_levels; - const struct abx500_battery_type *bat_type; + struct abx500_battery_type *bat_type; const struct abx500_bm_charger_parameters *chg_params; const struct abx500_fg_parameters *fg_params; }; -struct abx500_chargalg_platform_data { - char **supplied_to; - size_t num_supplicants; -}; - -struct abx500_charger_platform_data { - char **supplied_to; - size_t num_supplicants; - bool autopower_cfg; -}; +extern struct abx500_bm_data ab8500_bm_data; -struct abx500_btemp_platform_data { - char **supplied_to; - size_t num_supplicants; +enum { + NTC_EXTERNAL = 0, + NTC_INTERNAL, }; -struct abx500_fg_platform_data { - char **supplied_to; - size_t num_supplicants; -}; - -struct abx500_bm_plat_data { - struct abx500_bm_data *battery; - struct abx500_charger_platform_data *charger; - struct abx500_btemp_platform_data *btemp; - struct abx500_fg_platform_data *fg; - struct abx500_chargalg_platform_data *chargalg; -}; +int bmdevs_of_probe(struct device *dev, + struct device_node *np, + struct abx500_bm_data **battery); int abx500_set_register_interruptible(struct device *dev, u8 bank, u8 reg, u8 value); diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h index 1491044efa10..1cb5698b4d76 100644 --- a/include/linux/mfd/abx500/ab8500.h +++ b/include/linux/mfd/abx500/ab8500.h @@ -291,9 +291,9 @@ struct ab8500_platform_data { struct ab8500_codec_platform_data *codec; }; -extern int __devinit ab8500_init(struct ab8500 *ab8500, +extern int ab8500_init(struct ab8500 *ab8500, enum ab8500_version version); -extern int __devexit ab8500_exit(struct ab8500 *ab8500); +extern int ab8500_exit(struct ab8500 *ab8500); extern int ab8500_suspend(struct ab8500 *ab8500); diff --git a/include/linux/mfd/arizona/core.h b/include/linux/mfd/arizona/core.h index dd231ac0bb1f..a580363a7d29 100644 --- a/include/linux/mfd/arizona/core.h +++ b/include/linux/mfd/arizona/core.h @@ -78,6 +78,8 @@ enum arizona_type { #define ARIZONA_NUM_IRQ 50 +struct snd_soc_dapm_context; + struct arizona { struct regmap *regmap; struct device *dev; @@ -98,6 +100,8 @@ struct arizona { struct mutex clk_lock; int clk32k_ref; + + struct snd_soc_dapm_context *dapm; }; int arizona_clk32k_enable(struct arizona *arizona); diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h index 7ab442905a57..8b1d1daaae16 100644 --- a/include/linux/mfd/arizona/pdata.h +++ b/include/linux/mfd/arizona/pdata.h @@ -62,6 +62,9 @@ #define ARIZONA_MAX_OUTPUT 6 +#define ARIZONA_HAP_ACT_ERM 0 +#define ARIZONA_HAP_ACT_LRA 2 + #define ARIZONA_MAX_PDM_SPK 2 struct regulator_init_data; @@ -114,6 +117,9 @@ struct arizona_pdata { /** PDM speaker format */ unsigned int spk_fmt[ARIZONA_MAX_PDM_SPK]; + + /** Haptic actuator type */ + unsigned int hap_act; }; #endif diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h index 7671a287dfee..1f6fe31a4d5c 100644 --- a/include/linux/mfd/arizona/registers.h +++ b/include/linux/mfd/arizona/registers.h @@ -76,6 +76,7 @@ #define ARIZONA_RATE_ESTIMATOR_3 0x154 #define ARIZONA_RATE_ESTIMATOR_4 0x155 #define ARIZONA_RATE_ESTIMATOR_5 0x156 +#define ARIZONA_DYNAMIC_FREQUENCY_SCALING_1 0x161 #define ARIZONA_FLL1_CONTROL_1 0x171 #define ARIZONA_FLL1_CONTROL_2 0x172 #define ARIZONA_FLL1_CONTROL_3 0x173 @@ -110,6 +111,7 @@ #define ARIZONA_FLL2_GPIO_CLOCK 0x1AA #define ARIZONA_MIC_CHARGE_PUMP_1 0x200 #define ARIZONA_LDO1_CONTROL_1 0x210 +#define ARIZONA_LDO1_CONTROL_2 0x212 #define ARIZONA_LDO2_CONTROL_1 0x213 #define ARIZONA_MIC_BIAS_CTRL_1 0x218 #define ARIZONA_MIC_BIAS_CTRL_2 0x219 @@ -979,6 +981,7 @@ #define ARIZONA_DSP1_CLOCKING_1 0x1101 #define ARIZONA_DSP1_STATUS_1 0x1104 #define ARIZONA_DSP1_STATUS_2 0x1105 +#define ARIZONA_DSP1_STATUS_3 0x1106 #define ARIZONA_DSP2_CONTROL_1 0x1200 #define ARIZONA_DSP2_CLOCKING_1 0x1201 #define ARIZONA_DSP2_STATUS_1 0x1204 @@ -1574,6 +1577,13 @@ #define ARIZONA_SAMPLE_RATE_DETECT_D_WIDTH 5 /* SAMPLE_RATE_DETECT_D - [4:0] */ /* + * R353 (0x161) - Dynamic Frequency Scaling 1 + */ +#define ARIZONA_SUBSYS_MAX_FREQ 0x0001 /* SUBSYS_MAX_FREQ */ +#define ARIZONA_SUBSYS_MAX_FREQ_SHIFT 0 /* SUBSYS_MAX_FREQ */ +#define ARIZONA_SUBSYS_MAX_FREQ_WIDTH 1 /* SUBSYS_MAX_FREQ */ + +/* * R369 (0x171) - FLL1 Control 1 */ #define ARIZONA_FLL1_FREERUN 0x0002 /* FLL1_FREERUN */ @@ -1889,6 +1899,13 @@ #define ARIZONA_LDO1_ENA_WIDTH 1 /* LDO1_ENA */ /* + * R530 (0x212) - LDO1 Control 2 + */ +#define ARIZONA_LDO1_HI_PWR 0x0001 /* LDO1_HI_PWR */ +#define ARIZONA_LDO1_HI_PWR_SHIFT 0 /* LDO1_HI_PWR */ +#define ARIZONA_LDO1_HI_PWR_WIDTH 1 /* LDO1_HI_PWR */ + +/* * R531 (0x213) - LDO2 Control 1 */ #define ARIZONA_LDO2_VSEL_MASK 0x07E0 /* LDO2_VSEL - [10:5] */ diff --git a/include/linux/mfd/as3711.h b/include/linux/mfd/as3711.h new file mode 100644 index 000000000000..38452ce1e892 --- /dev/null +++ b/include/linux/mfd/as3711.h @@ -0,0 +1,126 @@ +/* + * AS3711 PMIC MFC driver header + * + * Copyright (C) 2012 Renesas Electronics Corporation + * Author: Guennadi Liakhovetski, <g.liakhovetski@gmx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the version 2 of the GNU General Public License as + * published by the Free Software Foundation + */ + +#ifndef MFD_AS3711_H +#define MFD_AS3711_H + +/* + * Client data + */ + +/* Register addresses */ +#define AS3711_SD_1_VOLTAGE 0 /* Digital Step-Down */ +#define AS3711_SD_2_VOLTAGE 1 +#define AS3711_SD_3_VOLTAGE 2 +#define AS3711_SD_4_VOLTAGE 3 +#define AS3711_LDO_1_VOLTAGE 4 /* Analog LDO */ +#define AS3711_LDO_2_VOLTAGE 5 +#define AS3711_LDO_3_VOLTAGE 6 /* Digital LDO */ +#define AS3711_LDO_4_VOLTAGE 7 +#define AS3711_LDO_5_VOLTAGE 8 +#define AS3711_LDO_6_VOLTAGE 9 +#define AS3711_LDO_7_VOLTAGE 0xa +#define AS3711_LDO_8_VOLTAGE 0xb +#define AS3711_SD_CONTROL 0x10 +#define AS3711_GPIO_SIGNAL_OUT 0x20 +#define AS3711_GPIO_SIGNAL_IN 0x21 +#define AS3711_SD_CONTROL_1 0x30 +#define AS3711_SD_CONTROL_2 0x31 +#define AS3711_CURR_CONTROL 0x40 +#define AS3711_CURR1_VALUE 0x43 +#define AS3711_CURR2_VALUE 0x44 +#define AS3711_CURR3_VALUE 0x45 +#define AS3711_STEPUP_CONTROL_1 0x50 +#define AS3711_STEPUP_CONTROL_2 0x51 +#define AS3711_STEPUP_CONTROL_4 0x53 +#define AS3711_STEPUP_CONTROL_5 0x54 +#define AS3711_REG_STATUS 0x73 +#define AS3711_INTERRUPT_STATUS_1 0x77 +#define AS3711_INTERRUPT_STATUS_2 0x78 +#define AS3711_INTERRUPT_STATUS_3 0x79 +#define AS3711_CHARGER_STATUS_1 0x86 +#define AS3711_CHARGER_STATUS_2 0x87 +#define AS3711_ASIC_ID_1 0x90 +#define AS3711_ASIC_ID_2 0x91 + +#define AS3711_MAX_REGS 0x92 + +/* Regulators */ +enum { + AS3711_REGULATOR_SD_1, + AS3711_REGULATOR_SD_2, + AS3711_REGULATOR_SD_3, + AS3711_REGULATOR_SD_4, + AS3711_REGULATOR_LDO_1, + AS3711_REGULATOR_LDO_2, + AS3711_REGULATOR_LDO_3, + AS3711_REGULATOR_LDO_4, + AS3711_REGULATOR_LDO_5, + AS3711_REGULATOR_LDO_6, + AS3711_REGULATOR_LDO_7, + AS3711_REGULATOR_LDO_8, + + AS3711_REGULATOR_MAX, +}; + +struct device; +struct regmap; + +struct as3711 { + struct device *dev; + struct regmap *regmap; +}; + +#define AS3711_MAX_STEPDOWN 4 +#define AS3711_MAX_STEPUP 2 +#define AS3711_MAX_LDO 8 + +enum as3711_su2_feedback { + AS3711_SU2_VOLTAGE, + AS3711_SU2_CURR1, + AS3711_SU2_CURR2, + AS3711_SU2_CURR3, + AS3711_SU2_CURR_AUTO, +}; + +enum as3711_su2_fbprot { + AS3711_SU2_LX_SD4, + AS3711_SU2_GPIO2, + AS3711_SU2_GPIO3, + AS3711_SU2_GPIO4, +}; + +/* + * Platform data + */ + +struct as3711_regulator_pdata { + struct regulator_init_data *init_data[AS3711_REGULATOR_MAX]; +}; + +struct as3711_bl_pdata { + const char *su1_fb; + int su1_max_uA; + const char *su2_fb; + int su2_max_uA; + enum as3711_su2_feedback su2_feedback; + enum as3711_su2_fbprot su2_fbprot; + bool su2_auto_curr1; + bool su2_auto_curr2; + bool su2_auto_curr3; +}; + +struct as3711_platform_data { + struct as3711_regulator_pdata regulator; + struct as3711_bl_pdata backlight; +}; + +#endif diff --git a/include/linux/mfd/da9052/da9052.h b/include/linux/mfd/da9052/da9052.h index 0507c4c21a7d..86dd93de6ff2 100644 --- a/include/linux/mfd/da9052/da9052.h +++ b/include/linux/mfd/da9052/da9052.h @@ -146,4 +146,14 @@ void da9052_device_exit(struct da9052 *da9052); extern struct regmap_config da9052_regmap_config; +int da9052_irq_init(struct da9052 *da9052); +int da9052_irq_exit(struct da9052 *da9052); +int da9052_request_irq(struct da9052 *da9052, int irq, char *name, + irq_handler_t handler, void *data); +void da9052_free_irq(struct da9052 *da9052, int irq, void *data); + +int da9052_enable_irq(struct da9052 *da9052, int irq); +int da9052_disable_irq(struct da9052 *da9052, int irq); +int da9052_disable_irq_nosync(struct da9052 *da9052, int irq); + #endif /* __MFD_DA9052_DA9052_H */ diff --git a/include/linux/mfd/da9055/core.h b/include/linux/mfd/da9055/core.h index c96ad682c59e..956afa445998 100644 --- a/include/linux/mfd/da9055/core.h +++ b/include/linux/mfd/da9055/core.h @@ -1,4 +1,4 @@ -/* +/* * da9055 declarations for DA9055 PMICs. * * Copyright(c) 2012 Dialog Semiconductor Ltd. diff --git a/include/linux/mfd/da9055/pdata.h b/include/linux/mfd/da9055/pdata.h index 147293b4471d..04e092be4b07 100644 --- a/include/linux/mfd/da9055/pdata.h +++ b/include/linux/mfd/da9055/pdata.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2012 Dialog Semiconductor Ltd. +/* Copyright (C) 2012 Dialog Semiconductor Ltd. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -25,8 +25,29 @@ struct da9055_pdata { int gpio_base; struct regulator_init_data *regulators[DA9055_MAX_REGULATORS]; - bool reset_enable; /* Enable RTC in RESET Mode */ - enum gpio_select *gpio_rsel; /* Select regulator set thru GPIO 1/2 */ - enum gpio_select *gpio_ren; /* Enable regulator thru GPIO 1/2 */ + /* Enable RTC in RESET Mode */ + bool reset_enable; + /* + * GPI muxed pin to control + * regulator state A/B, 0 if not available. + */ + int *gpio_ren; + /* + * GPI muxed pin to control + * regulator set, 0 if not available. + */ + int *gpio_rsel; + /* + * Regulator mode control bits value (GPI offset) that + * that controls the regulator state, 0 if not available. + */ + enum gpio_select *reg_ren; + /* + * Regulator mode control bits value (GPI offset) that + * controls the regulator set A/B, 0 if not available. + */ + enum gpio_select *reg_rsel; + /* GPIOs to enable regulator, 0 if not available */ + int *ena_gpio; }; #endif /* __DA9055_PDATA_H */ diff --git a/include/linux/mfd/da9055/reg.h b/include/linux/mfd/da9055/reg.h index df237ee54803..2b592e072dbf 100644 --- a/include/linux/mfd/da9055/reg.h +++ b/include/linux/mfd/da9055/reg.h @@ -1,4 +1,4 @@ -/* +/* * DA9055 declarations for DA9055 PMICs. * * Copyright(c) 2012 Dialog Semiconductor Ltd. diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h index b82f6ee66a0b..6ee4247df11e 100644 --- a/include/linux/mfd/db8500-prcmu.h +++ b/include/linux/mfd/db8500-prcmu.h @@ -515,7 +515,6 @@ enum romcode_read prcmu_get_rc_p2a(void); enum ap_pwrst prcmu_get_xp70_current_state(void); bool prcmu_has_arm_maxopp(void); struct prcmu_fw_version *prcmu_get_fw_version(void); -int prcmu_request_ape_opp_100_voltage(bool enable); int prcmu_release_usb_wakeup_state(void); void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep, struct prcmu_auto_pm_config *idle); @@ -564,6 +563,7 @@ int db8500_prcmu_set_arm_opp(u8 opp); int db8500_prcmu_get_arm_opp(void); int db8500_prcmu_set_ape_opp(u8 opp); int db8500_prcmu_get_ape_opp(void); +int db8500_prcmu_request_ape_opp_100_voltage(bool enable); int db8500_prcmu_set_ddr_opp(u8 opp); int db8500_prcmu_get_ddr_opp(void); @@ -610,7 +610,7 @@ static inline int db8500_prcmu_get_ape_opp(void) return APE_100_OPP; } -static inline int prcmu_request_ape_opp_100_voltage(bool enable) +static inline int db8500_prcmu_request_ape_opp_100_voltage(bool enable) { return 0; } diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index c410d99bd667..c202d6c4d879 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -336,6 +336,11 @@ static inline int prcmu_get_ape_opp(void) return db8500_prcmu_get_ape_opp(); } +static inline int prcmu_request_ape_opp_100_voltage(bool enable) +{ + return db8500_prcmu_request_ape_opp_100_voltage(enable); +} + static inline void prcmu_system_reset(u16 reset_code) { return db8500_prcmu_system_reset(reset_code); @@ -507,6 +512,11 @@ static inline int prcmu_get_ape_opp(void) return APE_100_OPP; } +static inline int prcmu_request_ape_opp_100_voltage(bool enable) +{ + return 0; +} + static inline int prcmu_set_arm_opp(u8 opp) { return 0; diff --git a/include/linux/mfd/lp8788.h b/include/linux/mfd/lp8788.h index cec364bdccfa..2a32b16f79cb 100644 --- a/include/linux/mfd/lp8788.h +++ b/include/linux/mfd/lp8788.h @@ -211,16 +211,16 @@ struct lp8788_chg_param { /* * struct lp8788_charger_platform_data - * @vbatt_adc : adc selection id for battery voltage - * @batt_temp_adc : adc selection id for battery temperature + * @adc_vbatt : adc channel name for battery voltage + * @adc_batt_temp : adc channel name for battery temperature * @max_vbatt_mv : used for calculating battery capacity * @chg_params : initial charging parameters * @num_chg_params : numbers of charging parameters * @charger_event : the charger event can be reported to the platform side */ struct lp8788_charger_platform_data { - enum lp8788_adc_id vbatt_adc; - enum lp8788_adc_id batt_temp_adc; + const char *adc_vbatt; + const char *adc_batt_temp; unsigned int max_vbatt_mv; struct lp8788_chg_param *chg_params; int num_chg_params; diff --git a/include/linux/mfd/max77693.h b/include/linux/mfd/max77693.h index 1d28ae90384e..fe03b2d35d4f 100644 --- a/include/linux/mfd/max77693.h +++ b/include/linux/mfd/max77693.h @@ -30,7 +30,20 @@ #ifndef __LINUX_MFD_MAX77693_H #define __LINUX_MFD_MAX77693_H +struct max77693_reg_data { + u8 addr; + u8 data; +}; + +struct max77693_muic_platform_data { + struct max77693_reg_data *init_data; + int num_init_data; +}; + struct max77693_platform_data { int wakeup; + + /* muic data */ + struct max77693_muic_platform_data *muic_data; }; #endif /* __LINUX_MFD_MAX77693_H */ diff --git a/include/linux/mfd/max8997-private.h b/include/linux/mfd/max8997-private.h index 830152cfae33..6ae21bf47d64 100644 --- a/include/linux/mfd/max8997-private.h +++ b/include/linux/mfd/max8997-private.h @@ -316,6 +316,7 @@ enum max8997_irq { #define MAX8997_NUM_GPIO 12 struct max8997_dev { struct device *dev; + struct max8997_platform_data *pdata; struct i2c_client *i2c; /* 0xcc / PMIC, Battery Control, and FLASH */ struct i2c_client *rtc; /* slave addr 0x0c */ struct i2c_client *haptic; /* slave addr 0x90 */ diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h index 328d8e24b533..1d4a4fe6ac33 100644 --- a/include/linux/mfd/max8997.h +++ b/include/linux/mfd/max8997.h @@ -75,6 +75,7 @@ enum max8998_regulators { struct max8997_regulator_data { int id; struct regulator_init_data *initdata; + struct device_node *reg_node; }; enum max8997_muic_usb_type { diff --git a/include/linux/mfd/menelaus.h b/include/linux/mfd/menelaus.h new file mode 100644 index 000000000000..f097e89134cb --- /dev/null +++ b/include/linux/mfd/menelaus.h @@ -0,0 +1,47 @@ +/* + * Functions to access Menelaus power management chip + */ + +#ifndef __ASM_ARCH_MENELAUS_H +#define __ASM_ARCH_MENELAUS_H + +struct device; + +struct menelaus_platform_data { + int (* late_init)(struct device *dev); +}; + +extern int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask), + void *data); +extern void menelaus_unregister_mmc_callback(void); +extern int menelaus_set_mmc_opendrain(int slot, int enable); +extern int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_on); + +extern int menelaus_set_vmem(unsigned int mV); +extern int menelaus_set_vio(unsigned int mV); +extern int menelaus_set_vmmc(unsigned int mV); +extern int menelaus_set_vaux(unsigned int mV); +extern int menelaus_set_vdcdc(int dcdc, unsigned int mV); +extern int menelaus_set_slot_sel(int enable); +extern int menelaus_get_slot_pin_states(void); +extern int menelaus_set_vcore_sw(unsigned int mV); +extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV); + +#define EN_VPLL_SLEEP (1 << 7) +#define EN_VMMC_SLEEP (1 << 6) +#define EN_VAUX_SLEEP (1 << 5) +#define EN_VIO_SLEEP (1 << 4) +#define EN_VMEM_SLEEP (1 << 3) +#define EN_DC3_SLEEP (1 << 2) +#define EN_DC2_SLEEP (1 << 1) +#define EN_VC_SLEEP (1 << 0) + +extern int menelaus_set_regulator_sleep(int enable, u32 val); + +#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_MENELAUS) +#define omap_has_menelaus() 1 +#else +#define omap_has_menelaus() 0 +#endif + +#endif diff --git a/include/linux/mfd/pm8xxx/irq.h b/include/linux/mfd/pm8xxx/irq.h index 4b21769f4483..f83d6b43ecbb 100644 --- a/include/linux/mfd/pm8xxx/irq.h +++ b/include/linux/mfd/pm8xxx/irq.h @@ -37,21 +37,21 @@ struct pm_irq_chip; #ifdef CONFIG_MFD_PM8XXX_IRQ int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq); -struct pm_irq_chip * __devinit pm8xxx_irq_init(struct device *dev, +struct pm_irq_chip *pm8xxx_irq_init(struct device *dev, const struct pm8xxx_irq_platform_data *pdata); -int __devexit pm8xxx_irq_exit(struct pm_irq_chip *chip); +int pm8xxx_irq_exit(struct pm_irq_chip *chip); #else static inline int pm8xxx_get_irq_stat(struct pm_irq_chip *chip, int irq) { return -ENXIO; } -static inline struct pm_irq_chip * __devinit pm8xxx_irq_init( +static inline struct pm_irq_chip *pm8xxx_irq_init( const struct device *dev, const struct pm8xxx_irq_platform_data *pdata) { return ERR_PTR(-ENXIO); } -static inline int __devexit pm8xxx_irq_exit(struct pm_irq_chip *chip) +static inline int pm8xxx_irq_exit(struct pm_irq_chip *chip) { return -ENXIO; } diff --git a/include/linux/mfd/rc5t583.h b/include/linux/mfd/rc5t583.h index 36c242e52ef1..fd413ccab915 100644 --- a/include/linux/mfd/rc5t583.h +++ b/include/linux/mfd/rc5t583.h @@ -33,6 +33,7 @@ /* Maximum number of main interrupts */ #define MAX_MAIN_INTERRUPT 5 #define RC5T583_MAX_GPEDGE_REG 2 +#define RC5T583_MAX_INTERRUPT_EN_REGS 8 #define RC5T583_MAX_INTERRUPT_MASK_REGS 9 /* Interrupt enable register */ @@ -304,7 +305,7 @@ struct rc5t583 { uint8_t intc_inten_reg; /* For group interrupt bits and address */ - uint8_t irq_en_reg[RC5T583_MAX_INTERRUPT_MASK_REGS]; + uint8_t irq_en_reg[RC5T583_MAX_INTERRUPT_EN_REGS]; /* For gpio edge */ uint8_t gpedge_reg[RC5T583_MAX_GPEDGE_REG]; diff --git a/include/linux/mfd/retu.h b/include/linux/mfd/retu.h new file mode 100644 index 000000000000..1e2715d5b836 --- /dev/null +++ b/include/linux/mfd/retu.h @@ -0,0 +1,22 @@ +/* + * Retu MFD driver interface + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + */ + +#ifndef __LINUX_MFD_RETU_H +#define __LINUX_MFD_RETU_H + +struct retu_dev; + +int retu_read(struct retu_dev *, u8); +int retu_write(struct retu_dev *, u8, u16); + +/* Registers */ +#define RETU_REG_WATCHDOG 0x17 /* Watchdog */ +#define RETU_REG_CC1 0x0d /* Common control register 1 */ +#define RETU_REG_STATUS 0x16 /* Status register */ + +#endif /* __LINUX_MFD_RETU_H */ diff --git a/include/linux/mfd/rtsx_common.h b/include/linux/mfd/rtsx_common.h new file mode 100644 index 000000000000..a8d393e3066b --- /dev/null +++ b/include/linux/mfd/rtsx_common.h @@ -0,0 +1,48 @@ +/* Driver for Realtek driver-based card reader + * + * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + * Author: + * Wei WANG <wei_wang@realsil.com.cn> + * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China + */ + +#ifndef __RTSX_COMMON_H +#define __RTSX_COMMON_H + +#define DRV_NAME_RTSX_PCI "rtsx_pci" +#define DRV_NAME_RTSX_PCI_SDMMC "rtsx_pci_sdmmc" +#define DRV_NAME_RTSX_PCI_MS "rtsx_pci_ms" + +#define RTSX_REG_PAIR(addr, val) (((u32)(addr) << 16) | (u8)(val)) + +#define RTSX_SSC_DEPTH_4M 0x01 +#define RTSX_SSC_DEPTH_2M 0x02 +#define RTSX_SSC_DEPTH_1M 0x03 +#define RTSX_SSC_DEPTH_500K 0x04 +#define RTSX_SSC_DEPTH_250K 0x05 + +#define RTSX_SD_CARD 0 +#define RTSX_MS_CARD 1 + +struct platform_device; + +struct rtsx_slot { + struct platform_device *p_dev; + void (*card_event)(struct platform_device *p_dev); +}; + +#endif diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h new file mode 100644 index 000000000000..060b721fcbfb --- /dev/null +++ b/include/linux/mfd/rtsx_pci.h @@ -0,0 +1,794 @@ +/* Driver for Realtek PCI-Express card reader + * + * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + * Author: + * Wei WANG <wei_wang@realsil.com.cn> + * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China + */ + +#ifndef __RTSX_PCI_H +#define __RTSX_PCI_H + +#include <linux/sched.h> +#include <linux/pci.h> + +#include "rtsx_common.h" + +#define MAX_RW_REG_CNT 1024 + +/* PCI Operation Register Address */ +#define RTSX_HCBAR 0x00 +#define RTSX_HCBCTLR 0x04 +#define RTSX_HDBAR 0x08 +#define RTSX_HDBCTLR 0x0C +#define RTSX_HAIMR 0x10 +#define RTSX_BIPR 0x14 +#define RTSX_BIER 0x18 + +/* Host command buffer control register */ +#define STOP_CMD (0x01 << 28) + +/* Host data buffer control register */ +#define SDMA_MODE 0x00 +#define ADMA_MODE (0x02 << 26) +#define STOP_DMA (0x01 << 28) +#define TRIG_DMA (0x01 << 31) + +/* Host access internal memory register */ +#define HAIMR_TRANS_START (0x01 << 31) +#define HAIMR_READ 0x00 +#define HAIMR_WRITE (0x01 << 30) +#define HAIMR_READ_START (HAIMR_TRANS_START | HAIMR_READ) +#define HAIMR_WRITE_START (HAIMR_TRANS_START | HAIMR_WRITE) +#define HAIMR_TRANS_END (HAIMR_TRANS_START) + +/* Bus interrupt pending register */ +#define CMD_DONE_INT (1 << 31) +#define DATA_DONE_INT (1 << 30) +#define TRANS_OK_INT (1 << 29) +#define TRANS_FAIL_INT (1 << 28) +#define XD_INT (1 << 27) +#define MS_INT (1 << 26) +#define SD_INT (1 << 25) +#define GPIO0_INT (1 << 24) +#define OC_INT (1 << 23) +#define SD_WRITE_PROTECT (1 << 19) +#define XD_EXIST (1 << 18) +#define MS_EXIST (1 << 17) +#define SD_EXIST (1 << 16) +#define DELINK_INT GPIO0_INT +#define MS_OC_INT (1 << 23) +#define SD_OC_INT (1 << 22) + +#define CARD_INT (XD_INT | MS_INT | SD_INT) +#define NEED_COMPLETE_INT (DATA_DONE_INT | TRANS_OK_INT | TRANS_FAIL_INT) +#define RTSX_INT (CMD_DONE_INT | NEED_COMPLETE_INT | \ + CARD_INT | GPIO0_INT | OC_INT) + +#define CARD_EXIST (XD_EXIST | MS_EXIST | SD_EXIST) + +/* Bus interrupt enable register */ +#define CMD_DONE_INT_EN (1 << 31) +#define DATA_DONE_INT_EN (1 << 30) +#define TRANS_OK_INT_EN (1 << 29) +#define TRANS_FAIL_INT_EN (1 << 28) +#define XD_INT_EN (1 << 27) +#define MS_INT_EN (1 << 26) +#define SD_INT_EN (1 << 25) +#define GPIO0_INT_EN (1 << 24) +#define OC_INT_EN (1 << 23) +#define DELINK_INT_EN GPIO0_INT_EN +#define MS_OC_INT_EN (1 << 23) +#define SD_OC_INT_EN (1 << 22) + +#define READ_REG_CMD 0 +#define WRITE_REG_CMD 1 +#define CHECK_REG_CMD 2 + +/* + * macros for easy use + */ +#define rtsx_pci_writel(pcr, reg, value) \ + iowrite32(value, (pcr)->remap_addr + reg) +#define rtsx_pci_readl(pcr, reg) \ + ioread32((pcr)->remap_addr + reg) +#define rtsx_pci_writew(pcr, reg, value) \ + iowrite16(value, (pcr)->remap_addr + reg) +#define rtsx_pci_readw(pcr, reg) \ + ioread16((pcr)->remap_addr + reg) +#define rtsx_pci_writeb(pcr, reg, value) \ + iowrite8(value, (pcr)->remap_addr + reg) +#define rtsx_pci_readb(pcr, reg) \ + ioread8((pcr)->remap_addr + reg) + +#define rtsx_pci_read_config_byte(pcr, where, val) \ + pci_read_config_byte((pcr)->pci, where, val) + +#define rtsx_pci_write_config_byte(pcr, where, val) \ + pci_write_config_byte((pcr)->pci, where, val) + +#define rtsx_pci_read_config_dword(pcr, where, val) \ + pci_read_config_dword((pcr)->pci, where, val) + +#define rtsx_pci_write_config_dword(pcr, where, val) \ + pci_write_config_dword((pcr)->pci, where, val) + +#define STATE_TRANS_NONE 0 +#define STATE_TRANS_CMD 1 +#define STATE_TRANS_BUF 2 +#define STATE_TRANS_SG 3 + +#define TRANS_NOT_READY 0 +#define TRANS_RESULT_OK 1 +#define TRANS_RESULT_FAIL 2 +#define TRANS_NO_DEVICE 3 + +#define RTSX_RESV_BUF_LEN 4096 +#define HOST_CMDS_BUF_LEN 1024 +#define HOST_SG_TBL_BUF_LEN (RTSX_RESV_BUF_LEN - HOST_CMDS_BUF_LEN) +#define HOST_SG_TBL_ITEMS (HOST_SG_TBL_BUF_LEN / 8) +#define MAX_SG_ITEM_LEN 0x80000 + +#define HOST_TO_DEVICE 0 +#define DEVICE_TO_HOST 1 + +#define MAX_PHASE 31 +#define RX_TUNING_CNT 3 + +/* SG descriptor */ +#define SG_INT 0x04 +#define SG_END 0x02 +#define SG_VALID 0x01 + +#define SG_NO_OP 0x00 +#define SG_TRANS_DATA (0x02 << 4) +#define SG_LINK_DESC (0x03 << 4) + +/* SD bank voltage */ +#define SD_IO_3V3 0 +#define SD_IO_1V8 1 + + +/* Card Clock Enable Register */ +#define SD_CLK_EN 0x04 +#define MS_CLK_EN 0x08 + +/* Card Select Register */ +#define SD_MOD_SEL 2 +#define MS_MOD_SEL 3 + +/* Card Output Enable Register */ +#define SD_OUTPUT_EN 0x04 +#define MS_OUTPUT_EN 0x08 + +/* CARD_SHARE_MODE */ +#define CARD_SHARE_MASK 0x0F +#define CARD_SHARE_MULTI_LUN 0x00 +#define CARD_SHARE_NORMAL 0x00 +#define CARD_SHARE_48_SD 0x04 +#define CARD_SHARE_48_MS 0x08 +/* CARD_SHARE_MODE for barossa */ +#define CARD_SHARE_BAROSSA_SD 0x01 +#define CARD_SHARE_BAROSSA_MS 0x02 + +/* SD30_DRIVE_SEL */ +#define DRIVER_TYPE_A 0x05 +#define DRIVER_TYPE_B 0x03 +#define DRIVER_TYPE_C 0x02 +#define DRIVER_TYPE_D 0x01 + +/* FPDCTL */ +#define SSC_POWER_DOWN 0x01 +#define SD_OC_POWER_DOWN 0x02 +#define ALL_POWER_DOWN 0x07 +#define OC_POWER_DOWN 0x06 + +/* CLK_CTL */ +#define CHANGE_CLK 0x01 + +/* LDO_CTL */ +#define BPP_LDO_POWB 0x03 +#define BPP_LDO_ON 0x00 +#define BPP_LDO_SUSPEND 0x02 +#define BPP_LDO_OFF 0x03 + +/* CD_PAD_CTL */ +#define CD_DISABLE_MASK 0x07 +#define MS_CD_DISABLE 0x04 +#define SD_CD_DISABLE 0x02 +#define XD_CD_DISABLE 0x01 +#define CD_DISABLE 0x07 +#define CD_ENABLE 0x00 +#define MS_CD_EN_ONLY 0x03 +#define SD_CD_EN_ONLY 0x05 +#define XD_CD_EN_ONLY 0x06 +#define FORCE_CD_LOW_MASK 0x38 +#define FORCE_CD_XD_LOW 0x08 +#define FORCE_CD_SD_LOW 0x10 +#define FORCE_CD_MS_LOW 0x20 +#define CD_AUTO_DISABLE 0x40 + +/* SD_STAT1 */ +#define SD_CRC7_ERR 0x80 +#define SD_CRC16_ERR 0x40 +#define SD_CRC_WRITE_ERR 0x20 +#define SD_CRC_WRITE_ERR_MASK 0x1C +#define GET_CRC_TIME_OUT 0x02 +#define SD_TUNING_COMPARE_ERR 0x01 + +/* SD_STAT2 */ +#define SD_RSP_80CLK_TIMEOUT 0x01 + +/* SD_BUS_STAT */ +#define SD_CLK_TOGGLE_EN 0x80 +#define SD_CLK_FORCE_STOP 0x40 +#define SD_DAT3_STATUS 0x10 +#define SD_DAT2_STATUS 0x08 +#define SD_DAT1_STATUS 0x04 +#define SD_DAT0_STATUS 0x02 +#define SD_CMD_STATUS 0x01 + +/* SD_PAD_CTL */ +#define SD_IO_USING_1V8 0x80 +#define SD_IO_USING_3V3 0x7F +#define TYPE_A_DRIVING 0x00 +#define TYPE_B_DRIVING 0x01 +#define TYPE_C_DRIVING 0x02 +#define TYPE_D_DRIVING 0x03 + +/* SD_SAMPLE_POINT_CTL */ +#define DDR_FIX_RX_DAT 0x00 +#define DDR_VAR_RX_DAT 0x80 +#define DDR_FIX_RX_DAT_EDGE 0x00 +#define DDR_FIX_RX_DAT_14_DELAY 0x40 +#define DDR_FIX_RX_CMD 0x00 +#define DDR_VAR_RX_CMD 0x20 +#define DDR_FIX_RX_CMD_POS_EDGE 0x00 +#define DDR_FIX_RX_CMD_14_DELAY 0x10 +#define SD20_RX_POS_EDGE 0x00 +#define SD20_RX_14_DELAY 0x08 +#define SD20_RX_SEL_MASK 0x08 + +/* SD_PUSH_POINT_CTL */ +#define DDR_FIX_TX_CMD_DAT 0x00 +#define DDR_VAR_TX_CMD_DAT 0x80 +#define DDR_FIX_TX_DAT_14_TSU 0x00 +#define DDR_FIX_TX_DAT_12_TSU 0x40 +#define DDR_FIX_TX_CMD_NEG_EDGE 0x00 +#define DDR_FIX_TX_CMD_14_AHEAD 0x20 +#define SD20_TX_NEG_EDGE 0x00 +#define SD20_TX_14_AHEAD 0x10 +#define SD20_TX_SEL_MASK 0x10 +#define DDR_VAR_SDCLK_POL_SWAP 0x01 + +/* SD_TRANSFER */ +#define SD_TRANSFER_START 0x80 +#define SD_TRANSFER_END 0x40 +#define SD_STAT_IDLE 0x20 +#define SD_TRANSFER_ERR 0x10 +/* SD Transfer Mode definition */ +#define SD_TM_NORMAL_WRITE 0x00 +#define SD_TM_AUTO_WRITE_3 0x01 +#define SD_TM_AUTO_WRITE_4 0x02 +#define SD_TM_AUTO_READ_3 0x05 +#define SD_TM_AUTO_READ_4 0x06 +#define SD_TM_CMD_RSP 0x08 +#define SD_TM_AUTO_WRITE_1 0x09 +#define SD_TM_AUTO_WRITE_2 0x0A +#define SD_TM_NORMAL_READ 0x0C +#define SD_TM_AUTO_READ_1 0x0D +#define SD_TM_AUTO_READ_2 0x0E +#define SD_TM_AUTO_TUNING 0x0F + +/* SD_VPTX_CTL / SD_VPRX_CTL */ +#define PHASE_CHANGE 0x80 +#define PHASE_NOT_RESET 0x40 + +/* SD_DCMPS_TX_CTL / SD_DCMPS_RX_CTL */ +#define DCMPS_CHANGE 0x80 +#define DCMPS_CHANGE_DONE 0x40 +#define DCMPS_ERROR 0x20 +#define DCMPS_CURRENT_PHASE 0x1F + +/* SD Configure 1 Register */ +#define SD_CLK_DIVIDE_0 0x00 +#define SD_CLK_DIVIDE_256 0xC0 +#define SD_CLK_DIVIDE_128 0x80 +#define SD_BUS_WIDTH_1BIT 0x00 +#define SD_BUS_WIDTH_4BIT 0x01 +#define SD_BUS_WIDTH_8BIT 0x02 +#define SD_ASYNC_FIFO_NOT_RST 0x10 +#define SD_20_MODE 0x00 +#define SD_DDR_MODE 0x04 +#define SD_30_MODE 0x08 + +#define SD_CLK_DIVIDE_MASK 0xC0 + +/* SD_CMD_STATE */ +#define SD_CMD_IDLE 0x80 + +/* SD_DATA_STATE */ +#define SD_DATA_IDLE 0x80 + +/* DCM_DRP_CTL */ +#define DCM_RESET 0x08 +#define DCM_LOCKED 0x04 +#define DCM_208M 0x00 +#define DCM_TX 0x01 +#define DCM_RX 0x02 + +/* DCM_DRP_TRIG */ +#define DRP_START 0x80 +#define DRP_DONE 0x40 + +/* DCM_DRP_CFG */ +#define DRP_WRITE 0x80 +#define DRP_READ 0x00 +#define DCM_WRITE_ADDRESS_50 0x50 +#define DCM_WRITE_ADDRESS_51 0x51 +#define DCM_READ_ADDRESS_00 0x00 +#define DCM_READ_ADDRESS_51 0x51 + +/* IRQSTAT0 */ +#define DMA_DONE_INT 0x80 +#define SUSPEND_INT 0x40 +#define LINK_RDY_INT 0x20 +#define LINK_DOWN_INT 0x10 + +/* DMACTL */ +#define DMA_RST 0x80 +#define DMA_BUSY 0x04 +#define DMA_DIR_TO_CARD 0x00 +#define DMA_DIR_FROM_CARD 0x02 +#define DMA_EN 0x01 +#define DMA_128 (0 << 4) +#define DMA_256 (1 << 4) +#define DMA_512 (2 << 4) +#define DMA_1024 (3 << 4) +#define DMA_PACK_SIZE_MASK 0x30 + +/* SSC_CTL1 */ +#define SSC_RSTB 0x80 +#define SSC_8X_EN 0x40 +#define SSC_FIX_FRAC 0x20 +#define SSC_SEL_1M 0x00 +#define SSC_SEL_2M 0x08 +#define SSC_SEL_4M 0x10 +#define SSC_SEL_8M 0x18 + +/* SSC_CTL2 */ +#define SSC_DEPTH_MASK 0x07 +#define SSC_DEPTH_DISALBE 0x00 +#define SSC_DEPTH_4M 0x01 +#define SSC_DEPTH_2M 0x02 +#define SSC_DEPTH_1M 0x03 +#define SSC_DEPTH_500K 0x04 +#define SSC_DEPTH_250K 0x05 + +/* System Clock Control Register */ +#define CLK_LOW_FREQ 0x01 + +/* System Clock Divider Register */ +#define CLK_DIV_1 0x01 +#define CLK_DIV_2 0x02 +#define CLK_DIV_4 0x03 +#define CLK_DIV_8 0x04 + +/* MS_CFG */ +#define SAMPLE_TIME_RISING 0x00 +#define SAMPLE_TIME_FALLING 0x80 +#define PUSH_TIME_DEFAULT 0x00 +#define PUSH_TIME_ODD 0x40 +#define NO_EXTEND_TOGGLE 0x00 +#define EXTEND_TOGGLE_CHK 0x20 +#define MS_BUS_WIDTH_1 0x00 +#define MS_BUS_WIDTH_4 0x10 +#define MS_BUS_WIDTH_8 0x18 +#define MS_2K_SECTOR_MODE 0x04 +#define MS_512_SECTOR_MODE 0x00 +#define MS_TOGGLE_TIMEOUT_EN 0x00 +#define MS_TOGGLE_TIMEOUT_DISEN 0x01 +#define MS_NO_CHECK_INT 0x02 + +/* MS_TRANS_CFG */ +#define WAIT_INT 0x80 +#define NO_WAIT_INT 0x00 +#define NO_AUTO_READ_INT_REG 0x00 +#define AUTO_READ_INT_REG 0x40 +#define MS_CRC16_ERR 0x20 +#define MS_RDY_TIMEOUT 0x10 +#define MS_INT_CMDNK 0x08 +#define MS_INT_BREQ 0x04 +#define MS_INT_ERR 0x02 +#define MS_INT_CED 0x01 + +/* MS_TRANSFER */ +#define MS_TRANSFER_START 0x80 +#define MS_TRANSFER_END 0x40 +#define MS_TRANSFER_ERR 0x20 +#define MS_BS_STATE 0x10 +#define MS_TM_READ_BYTES 0x00 +#define MS_TM_NORMAL_READ 0x01 +#define MS_TM_WRITE_BYTES 0x04 +#define MS_TM_NORMAL_WRITE 0x05 +#define MS_TM_AUTO_READ 0x08 +#define MS_TM_AUTO_WRITE 0x0C + +/* SD Configure 2 Register */ +#define SD_CALCULATE_CRC7 0x00 +#define SD_NO_CALCULATE_CRC7 0x80 +#define SD_CHECK_CRC16 0x00 +#define SD_NO_CHECK_CRC16 0x40 +#define SD_NO_CHECK_WAIT_CRC_TO 0x20 +#define SD_WAIT_BUSY_END 0x08 +#define SD_NO_WAIT_BUSY_END 0x00 +#define SD_CHECK_CRC7 0x00 +#define SD_NO_CHECK_CRC7 0x04 +#define SD_RSP_LEN_0 0x00 +#define SD_RSP_LEN_6 0x01 +#define SD_RSP_LEN_17 0x02 +/* SD/MMC Response Type Definition */ +#define SD_RSP_TYPE_R0 0x04 +#define SD_RSP_TYPE_R1 0x01 +#define SD_RSP_TYPE_R1b 0x09 +#define SD_RSP_TYPE_R2 0x02 +#define SD_RSP_TYPE_R3 0x05 +#define SD_RSP_TYPE_R4 0x05 +#define SD_RSP_TYPE_R5 0x01 +#define SD_RSP_TYPE_R6 0x01 +#define SD_RSP_TYPE_R7 0x01 + +/* SD_CONFIURE3 */ +#define SD_RSP_80CLK_TIMEOUT_EN 0x01 + +/* Card Transfer Reset Register */ +#define SPI_STOP 0x01 +#define XD_STOP 0x02 +#define SD_STOP 0x04 +#define MS_STOP 0x08 +#define SPI_CLR_ERR 0x10 +#define XD_CLR_ERR 0x20 +#define SD_CLR_ERR 0x40 +#define MS_CLR_ERR 0x80 + +/* Card Data Source Register */ +#define PINGPONG_BUFFER 0x01 +#define RING_BUFFER 0x00 + +/* Card Power Control Register */ +#define PMOS_STRG_MASK 0x10 +#define PMOS_STRG_800mA 0x10 +#define PMOS_STRG_400mA 0x00 +#define SD_POWER_OFF 0x03 +#define SD_PARTIAL_POWER_ON 0x01 +#define SD_POWER_ON 0x00 +#define SD_POWER_MASK 0x03 +#define MS_POWER_OFF 0x0C +#define MS_PARTIAL_POWER_ON 0x04 +#define MS_POWER_ON 0x00 +#define MS_POWER_MASK 0x0C +#define BPP_POWER_OFF 0x0F +#define BPP_POWER_5_PERCENT_ON 0x0E +#define BPP_POWER_10_PERCENT_ON 0x0C +#define BPP_POWER_15_PERCENT_ON 0x08 +#define BPP_POWER_ON 0x00 +#define BPP_POWER_MASK 0x0F + +/* PWR_GATE_CTRL */ +#define PWR_GATE_EN 0x01 +#define LDO3318_PWR_MASK 0x06 +#define LDO_ON 0x00 +#define LDO_SUSPEND 0x04 +#define LDO_OFF 0x06 + +/* CARD_CLK_SOURCE */ +#define CRC_FIX_CLK (0x00 << 0) +#define CRC_VAR_CLK0 (0x01 << 0) +#define CRC_VAR_CLK1 (0x02 << 0) +#define SD30_FIX_CLK (0x00 << 2) +#define SD30_VAR_CLK0 (0x01 << 2) +#define SD30_VAR_CLK1 (0x02 << 2) +#define SAMPLE_FIX_CLK (0x00 << 4) +#define SAMPLE_VAR_CLK0 (0x01 << 4) +#define SAMPLE_VAR_CLK1 (0x02 << 4) + +#define MS_CFG 0xFD40 +#define MS_TPC 0xFD41 +#define MS_TRANS_CFG 0xFD42 +#define MS_TRANSFER 0xFD43 +#define MS_INT_REG 0xFD44 +#define MS_BYTE_CNT 0xFD45 +#define MS_SECTOR_CNT_L 0xFD46 +#define MS_SECTOR_CNT_H 0xFD47 +#define MS_DBUS_H 0xFD48 + +#define SD_CFG1 0xFDA0 +#define SD_CFG2 0xFDA1 +#define SD_CFG3 0xFDA2 +#define SD_STAT1 0xFDA3 +#define SD_STAT2 0xFDA4 +#define SD_BUS_STAT 0xFDA5 +#define SD_PAD_CTL 0xFDA6 +#define SD_SAMPLE_POINT_CTL 0xFDA7 +#define SD_PUSH_POINT_CTL 0xFDA8 +#define SD_CMD0 0xFDA9 +#define SD_CMD1 0xFDAA +#define SD_CMD2 0xFDAB +#define SD_CMD3 0xFDAC +#define SD_CMD4 0xFDAD +#define SD_CMD5 0xFDAE +#define SD_BYTE_CNT_L 0xFDAF +#define SD_BYTE_CNT_H 0xFDB0 +#define SD_BLOCK_CNT_L 0xFDB1 +#define SD_BLOCK_CNT_H 0xFDB2 +#define SD_TRANSFER 0xFDB3 +#define SD_CMD_STATE 0xFDB5 +#define SD_DATA_STATE 0xFDB6 + +#define SRCTL 0xFC13 + +#define DCM_DRP_CTL 0xFC23 +#define DCM_DRP_TRIG 0xFC24 +#define DCM_DRP_CFG 0xFC25 +#define DCM_DRP_WR_DATA_L 0xFC26 +#define DCM_DRP_WR_DATA_H 0xFC27 +#define DCM_DRP_RD_DATA_L 0xFC28 +#define DCM_DRP_RD_DATA_H 0xFC29 +#define SD_VPCLK0_CTL 0xFC2A +#define SD_VPCLK1_CTL 0xFC2B +#define SD_DCMPS0_CTL 0xFC2C +#define SD_DCMPS1_CTL 0xFC2D +#define SD_VPTX_CTL SD_VPCLK0_CTL +#define SD_VPRX_CTL SD_VPCLK1_CTL +#define SD_DCMPS_TX_CTL SD_DCMPS0_CTL +#define SD_DCMPS_RX_CTL SD_DCMPS1_CTL +#define CARD_CLK_SOURCE 0xFC2E + +#define CARD_PWR_CTL 0xFD50 +#define CARD_CLK_SWITCH 0xFD51 +#define CARD_SHARE_MODE 0xFD52 +#define CARD_DRIVE_SEL 0xFD53 +#define CARD_STOP 0xFD54 +#define CARD_OE 0xFD55 +#define CARD_AUTO_BLINK 0xFD56 +#define CARD_GPIO_DIR 0xFD57 +#define CARD_GPIO 0xFD58 +#define CARD_DATA_SOURCE 0xFD5B +#define CARD_SELECT 0xFD5C +#define SD30_DRIVE_SEL 0xFD5E +#define CARD_CLK_EN 0xFD69 +#define SDIO_CTRL 0xFD6B +#define CD_PAD_CTL 0xFD73 + +#define FPDCTL 0xFC00 +#define PDINFO 0xFC01 + +#define CLK_CTL 0xFC02 +#define CLK_DIV 0xFC03 +#define CLK_SEL 0xFC04 + +#define SSC_DIV_N_0 0xFC0F +#define SSC_DIV_N_1 0xFC10 +#define SSC_CTL1 0xFC11 +#define SSC_CTL2 0xFC12 + +#define RCCTL 0xFC14 + +#define FPGA_PULL_CTL 0xFC1D +#define OLT_LED_CTL 0xFC1E +#define GPIO_CTL 0xFC1F + +#define LDO_CTL 0xFC1E +#define SYS_VER 0xFC32 + +#define CARD_PULL_CTL1 0xFD60 +#define CARD_PULL_CTL2 0xFD61 +#define CARD_PULL_CTL3 0xFD62 +#define CARD_PULL_CTL4 0xFD63 +#define CARD_PULL_CTL5 0xFD64 +#define CARD_PULL_CTL6 0xFD65 + +/* PCI Express Related Registers */ +#define IRQEN0 0xFE20 +#define IRQSTAT0 0xFE21 +#define IRQEN1 0xFE22 +#define IRQSTAT1 0xFE23 +#define TLPRIEN 0xFE24 +#define TLPRISTAT 0xFE25 +#define TLPTIEN 0xFE26 +#define TLPTISTAT 0xFE27 +#define DMATC0 0xFE28 +#define DMATC1 0xFE29 +#define DMATC2 0xFE2A +#define DMATC3 0xFE2B +#define DMACTL 0xFE2C +#define BCTL 0xFE2D +#define RBBC0 0xFE2E +#define RBBC1 0xFE2F +#define RBDAT 0xFE30 +#define RBCTL 0xFE34 +#define CFGADDR0 0xFE35 +#define CFGADDR1 0xFE36 +#define CFGDATA0 0xFE37 +#define CFGDATA1 0xFE38 +#define CFGDATA2 0xFE39 +#define CFGDATA3 0xFE3A +#define CFGRWCTL 0xFE3B +#define PHYRWCTL 0xFE3C +#define PHYDATA0 0xFE3D +#define PHYDATA1 0xFE3E +#define PHYADDR 0xFE3F +#define MSGRXDATA0 0xFE40 +#define MSGRXDATA1 0xFE41 +#define MSGRXDATA2 0xFE42 +#define MSGRXDATA3 0xFE43 +#define MSGTXDATA0 0xFE44 +#define MSGTXDATA1 0xFE45 +#define MSGTXDATA2 0xFE46 +#define MSGTXDATA3 0xFE47 +#define MSGTXCTL 0xFE48 +#define PETXCFG 0xFE49 + +#define CDRESUMECTL 0xFE52 +#define WAKE_SEL_CTL 0xFE54 +#define PME_FORCE_CTL 0xFE56 +#define ASPM_FORCE_CTL 0xFE57 +#define PM_CLK_FORCE_CTL 0xFE58 +#define PERST_GLITCH_WIDTH 0xFE5C +#define CHANGE_LINK_STATE 0xFE5B +#define RESET_LOAD_REG 0xFE5E +#define EFUSE_CONTENT 0xFE5F +#define HOST_SLEEP_STATE 0xFE60 +#define SDIO_CFG 0xFE70 + +#define NFTS_TX_CTRL 0xFE72 + +#define PWR_GATE_CTRL 0xFE75 +#define PWD_SUSPEND_EN 0xFE76 +#define LDO_PWR_SEL 0xFE78 + +#define DUMMY_REG_RESET_0 0xFE90 + +/* Memory mapping */ +#define SRAM_BASE 0xE600 +#define RBUF_BASE 0xF400 +#define PPBUF_BASE1 0xF800 +#define PPBUF_BASE2 0xFA00 +#define IMAGE_FLAG_ADDR0 0xCE80 +#define IMAGE_FLAG_ADDR1 0xCE81 + +#define rtsx_pci_init_cmd(pcr) ((pcr)->ci = 0) + +struct rtsx_pcr; + +struct pcr_handle { + struct rtsx_pcr *pcr; +}; + +struct pcr_ops { + int (*extra_init_hw)(struct rtsx_pcr *pcr); + int (*optimize_phy)(struct rtsx_pcr *pcr); + int (*turn_on_led)(struct rtsx_pcr *pcr); + int (*turn_off_led)(struct rtsx_pcr *pcr); + int (*enable_auto_blink)(struct rtsx_pcr *pcr); + int (*disable_auto_blink)(struct rtsx_pcr *pcr); + int (*card_power_on)(struct rtsx_pcr *pcr, int card); + int (*card_power_off)(struct rtsx_pcr *pcr, int card); + unsigned int (*cd_deglitch)(struct rtsx_pcr *pcr); +}; + +enum PDEV_STAT {PDEV_STAT_IDLE, PDEV_STAT_RUN}; + +struct rtsx_pcr { + struct pci_dev *pci; + unsigned int id; + + /* pci resources */ + unsigned long addr; + void __iomem *remap_addr; + int irq; + + /* host reserved buffer */ + void *rtsx_resv_buf; + dma_addr_t rtsx_resv_buf_addr; + + void *host_cmds_ptr; + dma_addr_t host_cmds_addr; + int ci; + + void *host_sg_tbl_ptr; + dma_addr_t host_sg_tbl_addr; + int sgi; + + u32 bier; + char trans_result; + + unsigned int card_inserted; + unsigned int card_removed; + + struct delayed_work carddet_work; + struct delayed_work idle_work; + + spinlock_t lock; + struct mutex pcr_mutex; + struct completion *done; + struct completion *finish_me; + + unsigned int cur_clock; + bool ms_pmos; + bool remove_pci; + bool msi_en; + +#define EXTRA_CAPS_SD_SDR50 (1 << 0) +#define EXTRA_CAPS_SD_SDR104 (1 << 1) +#define EXTRA_CAPS_SD_DDR50 (1 << 2) +#define EXTRA_CAPS_MMC_HSDDR (1 << 3) +#define EXTRA_CAPS_MMC_HS200 (1 << 4) +#define EXTRA_CAPS_MMC_8BIT (1 << 5) + u32 extra_caps; + +#define IC_VER_A 0 +#define IC_VER_B 1 +#define IC_VER_C 2 +#define IC_VER_D 3 + u8 ic_version; + + const u32 *sd_pull_ctl_enable_tbl; + const u32 *sd_pull_ctl_disable_tbl; + const u32 *ms_pull_ctl_enable_tbl; + const u32 *ms_pull_ctl_disable_tbl; + + const struct pcr_ops *ops; + enum PDEV_STAT state; + + int num_slots; + struct rtsx_slot *slots; +}; + +#define CHK_PCI_PID(pcr, pid) ((pcr)->pci->device == (pid)) +#define PCI_VID(pcr) ((pcr)->pci->vendor) +#define PCI_PID(pcr) ((pcr)->pci->device) + +void rtsx_pci_start_run(struct rtsx_pcr *pcr); +int rtsx_pci_write_register(struct rtsx_pcr *pcr, u16 addr, u8 mask, u8 data); +int rtsx_pci_read_register(struct rtsx_pcr *pcr, u16 addr, u8 *data); +int rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val); +int rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val); +void rtsx_pci_stop_cmd(struct rtsx_pcr *pcr); +void rtsx_pci_add_cmd(struct rtsx_pcr *pcr, + u8 cmd_type, u16 reg_addr, u8 mask, u8 data); +void rtsx_pci_send_cmd_no_wait(struct rtsx_pcr *pcr); +int rtsx_pci_send_cmd(struct rtsx_pcr *pcr, int timeout); +int rtsx_pci_transfer_data(struct rtsx_pcr *pcr, struct scatterlist *sglist, + int num_sg, bool read, int timeout); +int rtsx_pci_read_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len); +int rtsx_pci_write_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len); +int rtsx_pci_card_pull_ctl_enable(struct rtsx_pcr *pcr, int card); +int rtsx_pci_card_pull_ctl_disable(struct rtsx_pcr *pcr, int card); +int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock, + u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk); +int rtsx_pci_card_power_on(struct rtsx_pcr *pcr, int card); +int rtsx_pci_card_power_off(struct rtsx_pcr *pcr, int card); +unsigned int rtsx_pci_card_exist(struct rtsx_pcr *pcr); +void rtsx_pci_complete_unfinished_transfer(struct rtsx_pcr *pcr); + +static inline u8 *rtsx_pci_get_cmd_data(struct rtsx_pcr *pcr) +{ + return (u8 *)(pcr->host_cmds_ptr); +} + +#endif diff --git a/include/linux/mfd/sta2x11-mfd.h b/include/linux/mfd/sta2x11-mfd.h index d179227e866f..9a855ac11cbf 100644 --- a/include/linux/mfd/sta2x11-mfd.h +++ b/include/linux/mfd/sta2x11-mfd.h @@ -26,6 +26,28 @@ #include <linux/types.h> #include <linux/pci.h> +enum sta2x11_mfd_plat_dev { + sta2x11_sctl = 0, + sta2x11_gpio, + sta2x11_scr, + sta2x11_time, + sta2x11_apbreg, + sta2x11_apb_soc_regs, + sta2x11_vic, + sta2x11_n_mfd_plat_devs, +}; + +#define STA2X11_MFD_SCTL_NAME "sta2x11-sctl" +#define STA2X11_MFD_GPIO_NAME "sta2x11-gpio" +#define STA2X11_MFD_SCR_NAME "sta2x11-scr" +#define STA2X11_MFD_TIME_NAME "sta2x11-time" +#define STA2X11_MFD_APBREG_NAME "sta2x11-apbreg" +#define STA2X11_MFD_APB_SOC_REGS_NAME "sta2x11-apb-soc-regs" +#define STA2X11_MFD_VIC_NAME "sta2x11-vic" + +extern u32 +__sta2x11_mfd_mask(struct pci_dev *, u32, u32, u32, enum sta2x11_mfd_plat_dev); + /* * The MFD PCI block includes the GPIO peripherals and other register blocks. * For GPIO, we have 32*4 bits (I use "gsta" for "gpio sta2x11".) @@ -182,7 +204,11 @@ struct sta2x11_gpio_pdata { * The APB bridge has its own registers, needed by our users as well. * They are accessed with the following read/mask/write function. */ -u32 sta2x11_apbreg_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val); +static inline u32 +sta2x11_apbreg_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val) +{ + return __sta2x11_mfd_mask(pdev, reg, mask, val, sta2x11_apbreg); +} /* CAN and MLB */ #define APBREG_BSR 0x00 /* Bridge Status Reg */ @@ -211,19 +237,45 @@ u32 sta2x11_apbreg_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val); * The system controller has its own registers. Some of these are accessed * by out users as well, using the following read/mask/write/function */ -u32 sta2x11_sctl_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val); +static inline +u32 sta2x11_sctl_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val) +{ + return __sta2x11_mfd_mask(pdev, reg, mask, val, sta2x11_sctl); +} #define SCTL_SCCTL 0x00 /* System controller control register */ #define SCTL_ARMCFG 0x04 /* ARM configuration register */ #define SCTL_SCPLLCTL 0x08 /* PLL control status register */ + +#define SCTL_SCPLLCTL_AUDIO_PLL_PD BIT(1) +#define SCTL_SCPLLCTL_FRAC_CONTROL BIT(3) +#define SCTL_SCPLLCTL_STRB_BYPASS BIT(6) +#define SCTL_SCPLLCTL_STRB_INPUT BIT(8) + #define SCTL_SCPLLFCTRL 0x0c /* PLL frequency control register */ + +#define SCTL_SCPLLFCTRL_AUDIO_PLL_NDIV_MASK 0xff +#define SCTL_SCPLLFCTRL_AUDIO_PLL_NDIV_SHIFT 10 +#define SCTL_SCPLLFCTRL_AUDIO_PLL_IDF_MASK 7 +#define SCTL_SCPLLFCTRL_AUDIO_PLL_IDF_SHIFT 21 +#define SCTL_SCPLLFCTRL_AUDIO_PLL_ODF_MASK 7 +#define SCTL_SCPLLFCTRL_AUDIO_PLL_ODF_SHIFT 18 +#define SCTL_SCPLLFCTRL_DITHER_DISABLE_MASK 0x03 +#define SCTL_SCPLLFCTRL_DITHER_DISABLE_SHIFT 4 + + #define SCTL_SCRESFRACT 0x10 /* PLL fractional input register */ + +#define SCTL_SCRESFRACT_MASK 0x0000ffff + + #define SCTL_SCRESCTRL1 0x14 /* Peripheral reset control 1 */ #define SCTL_SCRESXTRL2 0x18 /* Peripheral reset control 2 */ #define SCTL_SCPEREN0 0x1c /* Peripheral clock enable register 0 */ #define SCTL_SCPEREN1 0x20 /* Peripheral clock enable register 1 */ #define SCTL_SCPEREN2 0x24 /* Peripheral clock enable register 2 */ #define SCTL_SCGRST 0x28 /* Peripheral global reset */ +#define SCTL_SCPCIECSBRST 0x2c /* PCIe PAB CSB reset status register */ #define SCTL_SCPCIPMCR1 0x30 /* PCI power management control 1 */ #define SCTL_SCPCIPMCR2 0x34 /* PCI power management control 2 */ #define SCTL_SCPCIPMSR1 0x38 /* PCI power management status 1 */ @@ -321,4 +373,146 @@ u32 sta2x11_sctl_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val); #define SCTL_SCPEREN1_I2C3 (1 << 16) #define SCTL_SCPEREN1_USB_PHY (1 << 17) +/* + * APB-SOC registers + */ +static inline +u32 sta2x11_apb_soc_regs_mask(struct pci_dev *pdev, u32 reg, u32 mask, u32 val) +{ + return __sta2x11_mfd_mask(pdev, reg, mask, val, sta2x11_apb_soc_regs); +} + +#define PCIE_EP1_FUNC3_0_INTR_REG 0x000 +#define PCIE_EP1_FUNC7_4_INTR_REG 0x004 +#define PCIE_EP2_FUNC3_0_INTR_REG 0x008 +#define PCIE_EP2_FUNC7_4_INTR_REG 0x00c +#define PCIE_EP3_FUNC3_0_INTR_REG 0x010 +#define PCIE_EP3_FUNC7_4_INTR_REG 0x014 +#define PCIE_EP4_FUNC3_0_INTR_REG 0x018 +#define PCIE_EP4_FUNC7_4_INTR_REG 0x01c +#define PCIE_INTR_ENABLE0_REG 0x020 +#define PCIE_INTR_ENABLE1_REG 0x024 +#define PCIE_EP1_FUNC_TC_REG 0x028 +#define PCIE_EP2_FUNC_TC_REG 0x02c +#define PCIE_EP3_FUNC_TC_REG 0x030 +#define PCIE_EP4_FUNC_TC_REG 0x034 +#define PCIE_EP1_FUNC_F_REG 0x038 +#define PCIE_EP2_FUNC_F_REG 0x03c +#define PCIE_EP3_FUNC_F_REG 0x040 +#define PCIE_EP4_FUNC_F_REG 0x044 +#define PCIE_PAB_AMBA_SW_RST_REG 0x048 +#define PCIE_PM_STATUS_0_PORT_0_4 0x04c +#define PCIE_PM_STATUS_7_0_EP1 0x050 +#define PCIE_PM_STATUS_7_0_EP2 0x054 +#define PCIE_PM_STATUS_7_0_EP3 0x058 +#define PCIE_PM_STATUS_7_0_EP4 0x05c +#define PCIE_DEV_ID_0_EP1_REG 0x060 +#define PCIE_CC_REV_ID_0_EP1_REG 0x064 +#define PCIE_DEV_ID_1_EP1_REG 0x068 +#define PCIE_CC_REV_ID_1_EP1_REG 0x06c +#define PCIE_DEV_ID_2_EP1_REG 0x070 +#define PCIE_CC_REV_ID_2_EP1_REG 0x074 +#define PCIE_DEV_ID_3_EP1_REG 0x078 +#define PCIE_CC_REV_ID_3_EP1_REG 0x07c +#define PCIE_DEV_ID_4_EP1_REG 0x080 +#define PCIE_CC_REV_ID_4_EP1_REG 0x084 +#define PCIE_DEV_ID_5_EP1_REG 0x088 +#define PCIE_CC_REV_ID_5_EP1_REG 0x08c +#define PCIE_DEV_ID_6_EP1_REG 0x090 +#define PCIE_CC_REV_ID_6_EP1_REG 0x094 +#define PCIE_DEV_ID_7_EP1_REG 0x098 +#define PCIE_CC_REV_ID_7_EP1_REG 0x09c +#define PCIE_DEV_ID_0_EP2_REG 0x0a0 +#define PCIE_CC_REV_ID_0_EP2_REG 0x0a4 +#define PCIE_DEV_ID_1_EP2_REG 0x0a8 +#define PCIE_CC_REV_ID_1_EP2_REG 0x0ac +#define PCIE_DEV_ID_2_EP2_REG 0x0b0 +#define PCIE_CC_REV_ID_2_EP2_REG 0x0b4 +#define PCIE_DEV_ID_3_EP2_REG 0x0b8 +#define PCIE_CC_REV_ID_3_EP2_REG 0x0bc +#define PCIE_DEV_ID_4_EP2_REG 0x0c0 +#define PCIE_CC_REV_ID_4_EP2_REG 0x0c4 +#define PCIE_DEV_ID_5_EP2_REG 0x0c8 +#define PCIE_CC_REV_ID_5_EP2_REG 0x0cc +#define PCIE_DEV_ID_6_EP2_REG 0x0d0 +#define PCIE_CC_REV_ID_6_EP2_REG 0x0d4 +#define PCIE_DEV_ID_7_EP2_REG 0x0d8 +#define PCIE_CC_REV_ID_7_EP2_REG 0x0dC +#define PCIE_DEV_ID_0_EP3_REG 0x0e0 +#define PCIE_CC_REV_ID_0_EP3_REG 0x0e4 +#define PCIE_DEV_ID_1_EP3_REG 0x0e8 +#define PCIE_CC_REV_ID_1_EP3_REG 0x0ec +#define PCIE_DEV_ID_2_EP3_REG 0x0f0 +#define PCIE_CC_REV_ID_2_EP3_REG 0x0f4 +#define PCIE_DEV_ID_3_EP3_REG 0x0f8 +#define PCIE_CC_REV_ID_3_EP3_REG 0x0fc +#define PCIE_DEV_ID_4_EP3_REG 0x100 +#define PCIE_CC_REV_ID_4_EP3_REG 0x104 +#define PCIE_DEV_ID_5_EP3_REG 0x108 +#define PCIE_CC_REV_ID_5_EP3_REG 0x10c +#define PCIE_DEV_ID_6_EP3_REG 0x110 +#define PCIE_CC_REV_ID_6_EP3_REG 0x114 +#define PCIE_DEV_ID_7_EP3_REG 0x118 +#define PCIE_CC_REV_ID_7_EP3_REG 0x11c +#define PCIE_DEV_ID_0_EP4_REG 0x120 +#define PCIE_CC_REV_ID_0_EP4_REG 0x124 +#define PCIE_DEV_ID_1_EP4_REG 0x128 +#define PCIE_CC_REV_ID_1_EP4_REG 0x12c +#define PCIE_DEV_ID_2_EP4_REG 0x130 +#define PCIE_CC_REV_ID_2_EP4_REG 0x134 +#define PCIE_DEV_ID_3_EP4_REG 0x138 +#define PCIE_CC_REV_ID_3_EP4_REG 0x13c +#define PCIE_DEV_ID_4_EP4_REG 0x140 +#define PCIE_CC_REV_ID_4_EP4_REG 0x144 +#define PCIE_DEV_ID_5_EP4_REG 0x148 +#define PCIE_CC_REV_ID_5_EP4_REG 0x14c +#define PCIE_DEV_ID_6_EP4_REG 0x150 +#define PCIE_CC_REV_ID_6_EP4_REG 0x154 +#define PCIE_DEV_ID_7_EP4_REG 0x158 +#define PCIE_CC_REV_ID_7_EP4_REG 0x15c +#define PCIE_SUBSYS_VEN_ID_REG 0x160 +#define PCIE_COMMON_CLOCK_CONFIG_0_4_0 0x164 +#define PCIE_MIPHYP_SSC_EN_REG 0x168 +#define PCIE_MIPHYP_ADDR_REG 0x16c +#define PCIE_L1_ASPM_READY_REG 0x170 +#define PCIE_EXT_CFG_RDY_REG 0x174 +#define PCIE_SoC_INT_ROUTER_STATUS0_REG 0x178 +#define PCIE_SoC_INT_ROUTER_STATUS1_REG 0x17c +#define PCIE_SoC_INT_ROUTER_STATUS2_REG 0x180 +#define PCIE_SoC_INT_ROUTER_STATUS3_REG 0x184 +#define DMA_IP_CTRL_REG 0x324 +#define DISP_BRIDGE_PU_PD_CTRL_REG 0x328 +#define VIP_PU_PD_CTRL_REG 0x32c +#define USB_MLB_PU_PD_CTRL_REG 0x330 +#define SDIO_PU_PD_MISCFUNC_CTRL_REG1 0x334 +#define SDIO_PU_PD_MISCFUNC_CTRL_REG2 0x338 +#define UART_PU_PD_CTRL_REG 0x33c +#define ARM_Lock 0x340 +#define SYS_IO_CHAR_REG1 0x344 +#define SYS_IO_CHAR_REG2 0x348 +#define SATA_CORE_ID_REG 0x34c +#define SATA_CTRL_REG 0x350 +#define I2C_HSFIX_MISC_REG 0x354 +#define SPARE2_RESERVED 0x358 +#define SPARE3_RESERVED 0x35c +#define MASTER_LOCK_REG 0x368 +#define SYSTEM_CONFIG_STATUS_REG 0x36c +#define MSP_CLK_CTRL_REG 0x39c +#define COMPENSATION_REG1 0x3c4 +#define COMPENSATION_REG2 0x3c8 +#define COMPENSATION_REG3 0x3cc +#define TEST_CTL_REG 0x3d0 + +/* + * SECR (OTP) registers + */ +#define STA2X11_SECR_CR 0x00 +#define STA2X11_SECR_FVR0 0x10 +#define STA2X11_SECR_FVR1 0x14 + +extern int sta2x11_mfd_get_regs_data(struct platform_device *pdev, + enum sta2x11_mfd_plat_dev index, + void __iomem **regs, + spinlock_t **lock); + #endif /* __STA2X11_MFD_H */ diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h index f8d5b4d5843f..383ac1512a39 100644 --- a/include/linux/mfd/stmpe.h +++ b/include/linux/mfd/stmpe.h @@ -62,6 +62,7 @@ struct stmpe_client_info; * @lock: lock protecting I/O operations * @irq_lock: IRQ bus lock * @dev: device, mostly for dev_dbg() + * @irq_domain: IRQ domain * @client: client - i2c or spi * @ci: client specific information * @partnum: part number @@ -79,6 +80,7 @@ struct stmpe { struct mutex lock; struct mutex irq_lock; struct device *dev; + struct irq_domain *domain; void *client; struct stmpe_client_info *ci; enum stmpe_partnum partnum; @@ -188,7 +190,6 @@ struct stmpe_ts_platform_data { * @id: device id to distinguish between multiple STMPEs on the same board * @blocks: bitmask of blocks to enable (use STMPE_BLOCK_*) * @irq_trigger: IRQ trigger to use for the interrupt to the host - * @irq_invert_polarity: IRQ line is connected with reversed polarity * @autosleep: bool to enable/disable stmpe autosleep * @autosleep_timeout: inactivity timeout in milliseconds for autosleep * @irq_base: base IRQ number. %STMPE_NR_IRQS irqs will be used, or @@ -205,7 +206,6 @@ struct stmpe_platform_data { unsigned int blocks; int irq_base; unsigned int irq_trigger; - bool irq_invert_polarity; bool autosleep; bool irq_over_gpio; int irq_gpio; diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h new file mode 100644 index 000000000000..c79ad5d2f271 --- /dev/null +++ b/include/linux/mfd/ti_am335x_tscadc.h @@ -0,0 +1,152 @@ +#ifndef __LINUX_TI_AM335X_TSCADC_MFD_H +#define __LINUX_TI_AM335X_TSCADC_MFD_H + +/* + * TI Touch Screen / ADC MFD driver + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/mfd/core.h> + +#define REG_RAWIRQSTATUS 0x024 +#define REG_IRQSTATUS 0x028 +#define REG_IRQENABLE 0x02C +#define REG_IRQCLR 0x030 +#define REG_IRQWAKEUP 0x034 +#define REG_CTRL 0x040 +#define REG_ADCFSM 0x044 +#define REG_CLKDIV 0x04C +#define REG_SE 0x054 +#define REG_IDLECONFIG 0x058 +#define REG_CHARGECONFIG 0x05C +#define REG_CHARGEDELAY 0x060 +#define REG_STEPCONFIG(n) (0x64 + ((n - 1) * 8)) +#define REG_STEPDELAY(n) (0x68 + ((n - 1) * 8)) +#define REG_FIFO0CNT 0xE4 +#define REG_FIFO0THR 0xE8 +#define REG_FIFO1CNT 0xF0 +#define REG_FIFO1THR 0xF4 +#define REG_FIFO0 0x100 +#define REG_FIFO1 0x200 + +/* Register Bitfields */ +/* IRQ wakeup enable */ +#define IRQWKUP_ENB BIT(0) + +/* Step Enable */ +#define STEPENB_MASK (0x1FFFF << 0) +#define STEPENB(val) ((val) << 0) +#define STPENB_STEPENB STEPENB(0x1FFFF) +#define STPENB_STEPENB_TC STEPENB(0x1FFF) + +/* IRQ enable */ +#define IRQENB_HW_PEN BIT(0) +#define IRQENB_FIFO0THRES BIT(2) +#define IRQENB_FIFO1THRES BIT(5) +#define IRQENB_PENUP BIT(9) + +/* Step Configuration */ +#define STEPCONFIG_MODE_MASK (3 << 0) +#define STEPCONFIG_MODE(val) ((val) << 0) +#define STEPCONFIG_MODE_HWSYNC STEPCONFIG_MODE(2) +#define STEPCONFIG_AVG_MASK (7 << 2) +#define STEPCONFIG_AVG(val) ((val) << 2) +#define STEPCONFIG_AVG_16 STEPCONFIG_AVG(4) +#define STEPCONFIG_XPP BIT(5) +#define STEPCONFIG_XNN BIT(6) +#define STEPCONFIG_YPP BIT(7) +#define STEPCONFIG_YNN BIT(8) +#define STEPCONFIG_XNP BIT(9) +#define STEPCONFIG_YPN BIT(10) +#define STEPCONFIG_INM_MASK (0xF << 15) +#define STEPCONFIG_INM(val) ((val) << 15) +#define STEPCONFIG_INM_ADCREFM STEPCONFIG_INM(8) +#define STEPCONFIG_INP_MASK (0xF << 19) +#define STEPCONFIG_INP(val) ((val) << 19) +#define STEPCONFIG_INP_AN2 STEPCONFIG_INP(2) +#define STEPCONFIG_INP_AN3 STEPCONFIG_INP(3) +#define STEPCONFIG_INP_AN4 STEPCONFIG_INP(4) +#define STEPCONFIG_INP_ADCREFM STEPCONFIG_INP(8) +#define STEPCONFIG_FIFO1 BIT(26) + +/* Delay register */ +#define STEPDELAY_OPEN_MASK (0x3FFFF << 0) +#define STEPDELAY_OPEN(val) ((val) << 0) +#define STEPCONFIG_OPENDLY STEPDELAY_OPEN(0x098) +#define STEPDELAY_SAMPLE_MASK (0xFF << 24) +#define STEPDELAY_SAMPLE(val) ((val) << 24) +#define STEPCONFIG_SAMPLEDLY STEPDELAY_SAMPLE(0) + +/* Charge Config */ +#define STEPCHARGE_RFP_MASK (7 << 12) +#define STEPCHARGE_RFP(val) ((val) << 12) +#define STEPCHARGE_RFP_XPUL STEPCHARGE_RFP(1) +#define STEPCHARGE_INM_MASK (0xF << 15) +#define STEPCHARGE_INM(val) ((val) << 15) +#define STEPCHARGE_INM_AN1 STEPCHARGE_INM(1) +#define STEPCHARGE_INP_MASK (0xF << 19) +#define STEPCHARGE_INP(val) ((val) << 19) +#define STEPCHARGE_INP_AN1 STEPCHARGE_INP(1) +#define STEPCHARGE_RFM_MASK (3 << 23) +#define STEPCHARGE_RFM(val) ((val) << 23) +#define STEPCHARGE_RFM_XNUR STEPCHARGE_RFM(1) + +/* Charge delay */ +#define CHARGEDLY_OPEN_MASK (0x3FFFF << 0) +#define CHARGEDLY_OPEN(val) ((val) << 0) +#define CHARGEDLY_OPENDLY CHARGEDLY_OPEN(1) + +/* Control register */ +#define CNTRLREG_TSCSSENB BIT(0) +#define CNTRLREG_STEPID BIT(1) +#define CNTRLREG_STEPCONFIGWRT BIT(2) +#define CNTRLREG_POWERDOWN BIT(4) +#define CNTRLREG_AFE_CTRL_MASK (3 << 5) +#define CNTRLREG_AFE_CTRL(val) ((val) << 5) +#define CNTRLREG_4WIRE CNTRLREG_AFE_CTRL(1) +#define CNTRLREG_5WIRE CNTRLREG_AFE_CTRL(2) +#define CNTRLREG_8WIRE CNTRLREG_AFE_CTRL(3) +#define CNTRLREG_TSCENB BIT(7) + +#define ADC_CLK 3000000 +#define MAX_CLK_DIV 7 +#define TOTAL_STEPS 16 +#define TOTAL_CHANNELS 8 + +#define TSCADC_CELLS 2 + +enum tscadc_cells { + TSC_CELL, + ADC_CELL, +}; + +struct mfd_tscadc_board { + struct tsc_data *tsc_init; + struct adc_data *adc_init; +}; + +struct ti_tscadc_dev { + struct device *dev; + struct regmap *regmap_tscadc; + void __iomem *tscadc_base; + int irq; + struct mfd_cell cells[TSCADC_CELLS]; + + /* tsc device */ + struct titsc *tsc; + + /* adc device */ + struct adc_device *adc; +}; + +#endif diff --git a/include/linux/mfd/tps65090.h b/include/linux/mfd/tps65090.h index 6bc31d854626..6694cf43e8b8 100644 --- a/include/linux/mfd/tps65090.h +++ b/include/linux/mfd/tps65090.h @@ -23,37 +23,109 @@ #define __LINUX_MFD_TPS65090_H #include <linux/irq.h> +#include <linux/regmap.h> + +/* TPS65090 IRQs */ +enum { + TPS65090_IRQ_VAC_STATUS_CHANGE, + TPS65090_IRQ_VSYS_STATUS_CHANGE, + TPS65090_IRQ_BAT_STATUS_CHANGE, + TPS65090_IRQ_CHARGING_STATUS_CHANGE, + TPS65090_IRQ_CHARGING_COMPLETE, + TPS65090_IRQ_OVERLOAD_DCDC1, + TPS65090_IRQ_OVERLOAD_DCDC2, + TPS65090_IRQ_OVERLOAD_DCDC3, + TPS65090_IRQ_OVERLOAD_FET1, + TPS65090_IRQ_OVERLOAD_FET2, + TPS65090_IRQ_OVERLOAD_FET3, + TPS65090_IRQ_OVERLOAD_FET4, + TPS65090_IRQ_OVERLOAD_FET5, + TPS65090_IRQ_OVERLOAD_FET6, + TPS65090_IRQ_OVERLOAD_FET7, +}; + +/* TPS65090 Regulator ID */ +enum { + TPS65090_REGULATOR_DCDC1, + TPS65090_REGULATOR_DCDC2, + TPS65090_REGULATOR_DCDC3, + TPS65090_REGULATOR_FET1, + TPS65090_REGULATOR_FET2, + TPS65090_REGULATOR_FET3, + TPS65090_REGULATOR_FET4, + TPS65090_REGULATOR_FET5, + TPS65090_REGULATOR_FET6, + TPS65090_REGULATOR_FET7, + TPS65090_REGULATOR_LDO1, + TPS65090_REGULATOR_LDO2, + + /* Last entry for maximum ID */ + TPS65090_REGULATOR_MAX, +}; struct tps65090 { - struct mutex lock; struct device *dev; - struct i2c_client *client; struct regmap *rmap; - struct irq_chip irq_chip; - struct mutex irq_lock; - int irq_base; - unsigned int id; + struct regmap_irq_chip_data *irq_data; }; -struct tps65090_subdev_info { - int id; - const char *name; - void *platform_data; +/* + * struct tps65090_regulator_plat_data + * + * @reg_init_data: The regulator init data. + * @enable_ext_control: Enable extrenal control or not. Only available for + * DCDC1, DCDC2 and DCDC3. + * @gpio: Gpio number if external control is enabled and controlled through + * gpio. + */ +struct tps65090_regulator_plat_data { + struct regulator_init_data *reg_init_data; + bool enable_ext_control; + int gpio; }; struct tps65090_platform_data { int irq_base; - int num_subdevs; - struct tps65090_subdev_info *subdevs; + struct tps65090_regulator_plat_data *reg_pdata[TPS65090_REGULATOR_MAX]; }; /* * NOTE: the functions below are not intended for use outside * of the TPS65090 sub-device drivers */ -extern int tps65090_write(struct device *dev, int reg, uint8_t val); -extern int tps65090_read(struct device *dev, int reg, uint8_t *val); -extern int tps65090_set_bits(struct device *dev, int reg, uint8_t bit_num); -extern int tps65090_clr_bits(struct device *dev, int reg, uint8_t bit_num); +static inline int tps65090_write(struct device *dev, int reg, uint8_t val) +{ + struct tps65090 *tps = dev_get_drvdata(dev); + + return regmap_write(tps->rmap, reg, val); +} + +static inline int tps65090_read(struct device *dev, int reg, uint8_t *val) +{ + struct tps65090 *tps = dev_get_drvdata(dev); + unsigned int temp_val; + int ret; + + ret = regmap_read(tps->rmap, reg, &temp_val); + if (!ret) + *val = temp_val; + return ret; +} + +static inline int tps65090_set_bits(struct device *dev, int reg, + uint8_t bit_num) +{ + struct tps65090 *tps = dev_get_drvdata(dev); + + return regmap_update_bits(tps->rmap, reg, BIT(bit_num), ~0u); +} + +static inline int tps65090_clr_bits(struct device *dev, int reg, + uint8_t bit_num) +{ + struct tps65090 *tps = dev_get_drvdata(dev); + + return regmap_update_bits(tps->rmap, reg, BIT(bit_num), 0u); +} #endif /*__LINUX_MFD_TPS65090_H */ diff --git a/include/linux/mfd/tps6586x.h b/include/linux/mfd/tps6586x.h index 2dd123194958..87994542573b 100644 --- a/include/linux/mfd/tps6586x.h +++ b/include/linux/mfd/tps6586x.h @@ -29,6 +29,7 @@ enum { TPS6586X_ID_LDO_8, TPS6586X_ID_LDO_9, TPS6586X_ID_LDO_RTC, + TPS6586X_ID_MAX_REGULATOR, }; enum { @@ -79,6 +80,8 @@ struct tps6586x_platform_data { int gpio_base; int irq_base; bool pm_off; + + struct regulator_init_data *reg_init_data[TPS6586X_ID_MAX_REGULATOR]; }; /* @@ -93,5 +96,6 @@ extern int tps6586x_set_bits(struct device *dev, int reg, uint8_t bit_mask); extern int tps6586x_clr_bits(struct device *dev, int reg, uint8_t bit_mask); extern int tps6586x_update(struct device *dev, int reg, uint8_t val, uint8_t mask); +extern int tps6586x_irq_get_virq(struct device *dev, int irq); #endif /*__LINUX_MFD_TPS6586X_H */ diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index 02e894f3ff45..20e433e551e3 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -572,6 +572,49 @@ #define SPARE_SPARE_MASK 0xFF #define SPARE_SPARE_SHIFT 0 +#define TPS65910_INT_STS_RTC_PERIOD_IT_MASK 0x80 +#define TPS65910_INT_STS_RTC_PERIOD_IT_SHIFT 7 +#define TPS65910_INT_STS_RTC_ALARM_IT_MASK 0x40 +#define TPS65910_INT_STS_RTC_ALARM_IT_SHIFT 6 +#define TPS65910_INT_STS_HOTDIE_IT_MASK 0x20 +#define TPS65910_INT_STS_HOTDIE_IT_SHIFT 5 +#define TPS65910_INT_STS_PWRHOLD_F_IT_MASK 0x10 +#define TPS65910_INT_STS_PWRHOLD_F_IT_SHIFT 4 +#define TPS65910_INT_STS_PWRON_LP_IT_MASK 0x08 +#define TPS65910_INT_STS_PWRON_LP_IT_SHIFT 3 +#define TPS65910_INT_STS_PWRON_IT_MASK 0x04 +#define TPS65910_INT_STS_PWRON_IT_SHIFT 2 +#define TPS65910_INT_STS_VMBHI_IT_MASK 0x02 +#define TPS65910_INT_STS_VMBHI_IT_SHIFT 1 +#define TPS65910_INT_STS_VMBDCH_IT_MASK 0x01 +#define TPS65910_INT_STS_VMBDCH_IT_SHIFT 0 + +#define TPS65910_INT_MSK_RTC_PERIOD_IT_MSK_MASK 0x80 +#define TPS65910_INT_MSK_RTC_PERIOD_IT_MSK_SHIFT 7 +#define TPS65910_INT_MSK_RTC_ALARM_IT_MSK_MASK 0x40 +#define TPS65910_INT_MSK_RTC_ALARM_IT_MSK_SHIFT 6 +#define TPS65910_INT_MSK_HOTDIE_IT_MSK_MASK 0x20 +#define TPS65910_INT_MSK_HOTDIE_IT_MSK_SHIFT 5 +#define TPS65910_INT_MSK_PWRHOLD_IT_MSK_MASK 0x10 +#define TPS65910_INT_MSK_PWRHOLD_IT_MSK_SHIFT 4 +#define TPS65910_INT_MSK_PWRON_LP_IT_MSK_MASK 0x08 +#define TPS65910_INT_MSK_PWRON_LP_IT_MSK_SHIFT 3 +#define TPS65910_INT_MSK_PWRON_IT_MSK_MASK 0x04 +#define TPS65910_INT_MSK_PWRON_IT_MSK_SHIFT 2 +#define TPS65910_INT_MSK_VMBHI_IT_MSK_MASK 0x02 +#define TPS65910_INT_MSK_VMBHI_IT_MSK_SHIFT 1 +#define TPS65910_INT_MSK_VMBDCH_IT_MSK_MASK 0x01 +#define TPS65910_INT_MSK_VMBDCH_IT_MSK_SHIFT 0 + +#define TPS65910_INT_STS2_GPIO0_F_IT_SHIFT 2 +#define TPS65910_INT_STS2_GPIO0_F_IT_MASK 0x02 +#define TPS65910_INT_STS2_GPIO0_R_IT_SHIFT 1 +#define TPS65910_INT_STS2_GPIO0_R_IT_MASK 0x01 + +#define TPS65910_INT_MSK2_GPIO0_F_IT_MSK_SHIFT 2 +#define TPS65910_INT_MSK2_GPIO0_F_IT_MSK_MASK 0x02 +#define TPS65910_INT_MSK2_GPIO0_R_IT_MSK_SHIFT 1 +#define TPS65910_INT_MSK2_GPIO0_R_IT_MSK_MASK 0x01 /*Register INT_STS (0x80) register.RegisterDescription */ #define INT_STS_RTC_PERIOD_IT_MASK 0x80 @@ -580,16 +623,16 @@ #define INT_STS_RTC_ALARM_IT_SHIFT 6 #define INT_STS_HOTDIE_IT_MASK 0x20 #define INT_STS_HOTDIE_IT_SHIFT 5 -#define INT_STS_PWRHOLD_IT_MASK 0x10 -#define INT_STS_PWRHOLD_IT_SHIFT 4 +#define INT_STS_PWRHOLD_R_IT_MASK 0x10 +#define INT_STS_PWRHOLD_R_IT_SHIFT 4 #define INT_STS_PWRON_LP_IT_MASK 0x08 #define INT_STS_PWRON_LP_IT_SHIFT 3 #define INT_STS_PWRON_IT_MASK 0x04 #define INT_STS_PWRON_IT_SHIFT 2 #define INT_STS_VMBHI_IT_MASK 0x02 #define INT_STS_VMBHI_IT_SHIFT 1 -#define INT_STS_VMBDCH_IT_MASK 0x01 -#define INT_STS_VMBDCH_IT_SHIFT 0 +#define INT_STS_PWRHOLD_F_IT_MASK 0x01 +#define INT_STS_PWRHOLD_F_IT_SHIFT 0 /*Register INT_MSK (0x80) register.RegisterDescription */ @@ -599,16 +642,16 @@ #define INT_MSK_RTC_ALARM_IT_MSK_SHIFT 6 #define INT_MSK_HOTDIE_IT_MSK_MASK 0x20 #define INT_MSK_HOTDIE_IT_MSK_SHIFT 5 -#define INT_MSK_PWRHOLD_IT_MSK_MASK 0x10 -#define INT_MSK_PWRHOLD_IT_MSK_SHIFT 4 +#define INT_MSK_PWRHOLD_R_IT_MSK_MASK 0x10 +#define INT_MSK_PWRHOLD_R_IT_MSK_SHIFT 4 #define INT_MSK_PWRON_LP_IT_MSK_MASK 0x08 #define INT_MSK_PWRON_LP_IT_MSK_SHIFT 3 #define INT_MSK_PWRON_IT_MSK_MASK 0x04 #define INT_MSK_PWRON_IT_MSK_SHIFT 2 #define INT_MSK_VMBHI_IT_MSK_MASK 0x02 #define INT_MSK_VMBHI_IT_MSK_SHIFT 1 -#define INT_MSK_VMBDCH_IT_MSK_MASK 0x01 -#define INT_MSK_VMBDCH_IT_MSK_SHIFT 0 +#define INT_MSK_PWRHOLD_F_IT_MSK_MASK 0x01 +#define INT_MSK_PWRHOLD_F_IT_MSK_SHIFT 0 /*Register INT_STS2 (0x80) register.RegisterDescription */ @@ -650,6 +693,14 @@ /*Register INT_STS3 (0x80) register.RegisterDescription */ +#define INT_STS3_PWRDN_IT_MASK 0x80 +#define INT_STS3_PWRDN_IT_SHIFT 7 +#define INT_STS3_VMBCH2_L_IT_MASK 0x40 +#define INT_STS3_VMBCH2_L_IT_SHIFT 6 +#define INT_STS3_VMBCH2_H_IT_MASK 0x20 +#define INT_STS3_VMBCH2_H_IT_SHIFT 5 +#define INT_STS3_WTCHDG_IT_MASK 0x10 +#define INT_STS3_WTCHDG_IT_SHIFT 4 #define INT_STS3_GPIO5_F_IT_MASK 0x08 #define INT_STS3_GPIO5_F_IT_SHIFT 3 #define INT_STS3_GPIO5_R_IT_MASK 0x04 @@ -661,6 +712,14 @@ /*Register INT_MSK3 (0x80) register.RegisterDescription */ +#define INT_MSK3_PWRDN_IT_MSK_MASK 0x80 +#define INT_MSK3_PWRDN_IT_MSK_SHIFT 7 +#define INT_MSK3_VMBCH2_L_IT_MSK_MASK 0x40 +#define INT_MSK3_VMBCH2_L_IT_MSK_SHIFT 6 +#define INT_MSK3_VMBCH2_H_IT_MSK_MASK 0x20 +#define INT_MSK3_VMBCH2_H_IT_MSK_SHIFT 5 +#define INT_MSK3_WTCHDG_IT_MSK_MASK 0x10 +#define INT_MSK3_WTCHDG_IT_MSK_SHIFT 4 #define INT_MSK3_GPIO5_F_IT_MSK_MASK 0x08 #define INT_MSK3_GPIO5_F_IT_MSK_SHIFT 3 #define INT_MSK3_GPIO5_R_IT_MSK_MASK 0x04 @@ -721,34 +780,32 @@ #define TPS65910_IRQ_GPIO_F 9 #define TPS65910_NUM_IRQ 10 -#define TPS65911_IRQ_VBAT_VMBDCH 0 -#define TPS65911_IRQ_VBAT_VMBDCH2L 1 -#define TPS65911_IRQ_VBAT_VMBDCH2H 2 -#define TPS65911_IRQ_VBAT_VMHI 3 -#define TPS65911_IRQ_PWRON 4 -#define TPS65911_IRQ_PWRON_LP 5 -#define TPS65911_IRQ_PWRHOLD_F 6 -#define TPS65911_IRQ_PWRHOLD_R 7 -#define TPS65911_IRQ_HOTDIE 8 -#define TPS65911_IRQ_RTC_ALARM 9 -#define TPS65911_IRQ_RTC_PERIOD 10 -#define TPS65911_IRQ_GPIO0_R 11 -#define TPS65911_IRQ_GPIO0_F 12 -#define TPS65911_IRQ_GPIO1_R 13 -#define TPS65911_IRQ_GPIO1_F 14 -#define TPS65911_IRQ_GPIO2_R 15 -#define TPS65911_IRQ_GPIO2_F 16 -#define TPS65911_IRQ_GPIO3_R 17 -#define TPS65911_IRQ_GPIO3_F 18 -#define TPS65911_IRQ_GPIO4_R 19 -#define TPS65911_IRQ_GPIO4_F 20 -#define TPS65911_IRQ_GPIO5_R 21 -#define TPS65911_IRQ_GPIO5_F 22 -#define TPS65911_IRQ_WTCHDG 23 -#define TPS65911_IRQ_PWRDN 24 - -#define TPS65911_NUM_IRQ 25 - +#define TPS65911_IRQ_PWRHOLD_F 0 +#define TPS65911_IRQ_VBAT_VMHI 1 +#define TPS65911_IRQ_PWRON 2 +#define TPS65911_IRQ_PWRON_LP 3 +#define TPS65911_IRQ_PWRHOLD_R 4 +#define TPS65911_IRQ_HOTDIE 5 +#define TPS65911_IRQ_RTC_ALARM 6 +#define TPS65911_IRQ_RTC_PERIOD 7 +#define TPS65911_IRQ_GPIO0_R 8 +#define TPS65911_IRQ_GPIO0_F 9 +#define TPS65911_IRQ_GPIO1_R 10 +#define TPS65911_IRQ_GPIO1_F 11 +#define TPS65911_IRQ_GPIO2_R 12 +#define TPS65911_IRQ_GPIO2_F 13 +#define TPS65911_IRQ_GPIO3_R 14 +#define TPS65911_IRQ_GPIO3_F 15 +#define TPS65911_IRQ_GPIO4_R 16 +#define TPS65911_IRQ_GPIO4_F 17 +#define TPS65911_IRQ_GPIO5_R 18 +#define TPS65911_IRQ_GPIO5_F 19 +#define TPS65911_IRQ_WTCHDG 20 +#define TPS65911_IRQ_VMBCH2_H 21 +#define TPS65911_IRQ_VMBCH2_L 22 +#define TPS65911_IRQ_PWRDN 23 + +#define TPS65911_NUM_IRQ 24 /* GPIO Register Definitions */ #define TPS65910_GPIO_DEB BIT(2) @@ -836,7 +893,6 @@ struct tps65910 { struct device *dev; struct i2c_client *i2c_client; struct regmap *regmap; - struct mutex io_mutex; unsigned int id; /* Client devices */ @@ -848,12 +904,8 @@ struct tps65910 { struct tps65910_board *of_plat_data; /* IRQ Handling */ - struct mutex irq_lock; int chip_irq; - int irq_base; - int irq_num; - u32 irq_mask; - struct irq_domain *domain; + struct regmap_irq_chip_data *irq_data; }; struct tps65910_platform_data { @@ -861,10 +913,6 @@ struct tps65910_platform_data { int irq_base; }; -int tps65910_irq_init(struct tps65910 *tps65910, int irq, - struct tps65910_platform_data *pdata); -int tps65910_irq_exit(struct tps65910 *tps65910); - static inline int tps65910_chip_id(struct tps65910 *tps65910) { return tps65910->id; @@ -900,4 +948,9 @@ static inline int tps65910_reg_update_bits(struct tps65910 *tps65910, u8 reg, return regmap_update_bits(tps65910->regmap, reg, mask, val); } +static inline int tps65910_irq_get_virq(struct tps65910 *tps65910, int irq) +{ + return regmap_irq_get_virq(tps65910->irq_data, irq); +} + #endif /* __LINUX_MFD_TPS65910_H */ diff --git a/include/linux/mfd/tps80031.h b/include/linux/mfd/tps80031.h new file mode 100644 index 000000000000..2c75c9c9318f --- /dev/null +++ b/include/linux/mfd/tps80031.h @@ -0,0 +1,637 @@ +/* + * tps80031.h -- TI TPS80031 and TI TPS80032 PMIC driver. + * + * Copyright (c) 2012, NVIDIA Corporation. + * + * Author: Laxman Dewangan <ldewangan@nvidia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, + * whether express or implied; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA + * 02111-1307, USA + */ + +#ifndef __LINUX_MFD_TPS80031_H +#define __LINUX_MFD_TPS80031_H + +#include <linux/device.h> +#include <linux/regmap.h> + +/* Pull-ups/Pull-downs */ +#define TPS80031_CFG_INPUT_PUPD1 0xF0 +#define TPS80031_CFG_INPUT_PUPD2 0xF1 +#define TPS80031_CFG_INPUT_PUPD3 0xF2 +#define TPS80031_CFG_INPUT_PUPD4 0xF3 +#define TPS80031_CFG_LDO_PD1 0xF4 +#define TPS80031_CFG_LDO_PD2 0xF5 +#define TPS80031_CFG_SMPS_PD 0xF6 + +/* Real Time Clock */ +#define TPS80031_SECONDS_REG 0x00 +#define TPS80031_MINUTES_REG 0x01 +#define TPS80031_HOURS_REG 0x02 +#define TPS80031_DAYS_REG 0x03 +#define TPS80031_MONTHS_REG 0x04 +#define TPS80031_YEARS_REG 0x05 +#define TPS80031_WEEKS_REG 0x06 +#define TPS80031_ALARM_SECONDS_REG 0x08 +#define TPS80031_ALARM_MINUTES_REG 0x09 +#define TPS80031_ALARM_HOURS_REG 0x0A +#define TPS80031_ALARM_DAYS_REG 0x0B +#define TPS80031_ALARM_MONTHS_REG 0x0C +#define TPS80031_ALARM_YEARS_REG 0x0D +#define TPS80031_RTC_CTRL_REG 0x10 +#define TPS80031_RTC_STATUS_REG 0x11 +#define TPS80031_RTC_INTERRUPTS_REG 0x12 +#define TPS80031_RTC_COMP_LSB_REG 0x13 +#define TPS80031_RTC_COMP_MSB_REG 0x14 +#define TPS80031_RTC_RESET_STATUS_REG 0x16 + +/*PMC Master Module */ +#define TPS80031_PHOENIX_START_CONDITION 0x1F +#define TPS80031_PHOENIX_MSK_TRANSITION 0x20 +#define TPS80031_STS_HW_CONDITIONS 0x21 +#define TPS80031_PHOENIX_LAST_TURNOFF_STS 0x22 +#define TPS80031_VSYSMIN_LO_THRESHOLD 0x23 +#define TPS80031_VSYSMIN_HI_THRESHOLD 0x24 +#define TPS80031_PHOENIX_DEV_ON 0x25 +#define TPS80031_STS_PWR_GRP_STATE 0x27 +#define TPS80031_PH_CFG_VSYSLOW 0x28 +#define TPS80031_PH_STS_BOOT 0x29 +#define TPS80031_PHOENIX_SENS_TRANSITION 0x2A +#define TPS80031_PHOENIX_SEQ_CFG 0x2B +#define TPS80031_PRIMARY_WATCHDOG_CFG 0X2C +#define TPS80031_KEY_PRESS_DUR_CFG 0X2D +#define TPS80031_SMPS_LDO_SHORT_STS 0x2E + +/* PMC Slave Module - Broadcast */ +#define TPS80031_BROADCAST_ADDR_ALL 0x31 +#define TPS80031_BROADCAST_ADDR_REF 0x32 +#define TPS80031_BROADCAST_ADDR_PROV 0x33 +#define TPS80031_BROADCAST_ADDR_CLK_RST 0x34 + +/* PMC Slave Module SMPS Regulators */ +#define TPS80031_SMPS4_CFG_TRANS 0x41 +#define TPS80031_SMPS4_CFG_STATE 0x42 +#define TPS80031_SMPS4_CFG_VOLTAGE 0x44 +#define TPS80031_VIO_CFG_TRANS 0x47 +#define TPS80031_VIO_CFG_STATE 0x48 +#define TPS80031_VIO_CFG_FORCE 0x49 +#define TPS80031_VIO_CFG_VOLTAGE 0x4A +#define TPS80031_VIO_CFG_STEP 0x48 +#define TPS80031_SMPS1_CFG_TRANS 0x53 +#define TPS80031_SMPS1_CFG_STATE 0x54 +#define TPS80031_SMPS1_CFG_FORCE 0x55 +#define TPS80031_SMPS1_CFG_VOLTAGE 0x56 +#define TPS80031_SMPS1_CFG_STEP 0x57 +#define TPS80031_SMPS2_CFG_TRANS 0x59 +#define TPS80031_SMPS2_CFG_STATE 0x5A +#define TPS80031_SMPS2_CFG_FORCE 0x5B +#define TPS80031_SMPS2_CFG_VOLTAGE 0x5C +#define TPS80031_SMPS2_CFG_STEP 0x5D +#define TPS80031_SMPS3_CFG_TRANS 0x65 +#define TPS80031_SMPS3_CFG_STATE 0x66 +#define TPS80031_SMPS3_CFG_VOLTAGE 0x68 + +/* PMC Slave Module LDO Regulators */ +#define TPS80031_VANA_CFG_TRANS 0x81 +#define TPS80031_VANA_CFG_STATE 0x82 +#define TPS80031_VANA_CFG_VOLTAGE 0x83 +#define TPS80031_LDO2_CFG_TRANS 0x85 +#define TPS80031_LDO2_CFG_STATE 0x86 +#define TPS80031_LDO2_CFG_VOLTAGE 0x87 +#define TPS80031_LDO4_CFG_TRANS 0x89 +#define TPS80031_LDO4_CFG_STATE 0x8A +#define TPS80031_LDO4_CFG_VOLTAGE 0x8B +#define TPS80031_LDO3_CFG_TRANS 0x8D +#define TPS80031_LDO3_CFG_STATE 0x8E +#define TPS80031_LDO3_CFG_VOLTAGE 0x8F +#define TPS80031_LDO6_CFG_TRANS 0x91 +#define TPS80031_LDO6_CFG_STATE 0x92 +#define TPS80031_LDO6_CFG_VOLTAGE 0x93 +#define TPS80031_LDOLN_CFG_TRANS 0x95 +#define TPS80031_LDOLN_CFG_STATE 0x96 +#define TPS80031_LDOLN_CFG_VOLTAGE 0x97 +#define TPS80031_LDO5_CFG_TRANS 0x99 +#define TPS80031_LDO5_CFG_STATE 0x9A +#define TPS80031_LDO5_CFG_VOLTAGE 0x9B +#define TPS80031_LDO1_CFG_TRANS 0x9D +#define TPS80031_LDO1_CFG_STATE 0x9E +#define TPS80031_LDO1_CFG_VOLTAGE 0x9F +#define TPS80031_LDOUSB_CFG_TRANS 0xA1 +#define TPS80031_LDOUSB_CFG_STATE 0xA2 +#define TPS80031_LDOUSB_CFG_VOLTAGE 0xA3 +#define TPS80031_LDO7_CFG_TRANS 0xA5 +#define TPS80031_LDO7_CFG_STATE 0xA6 +#define TPS80031_LDO7_CFG_VOLTAGE 0xA7 + +/* PMC Slave Module External Control */ +#define TPS80031_REGEN1_CFG_TRANS 0xAE +#define TPS80031_REGEN1_CFG_STATE 0xAF +#define TPS80031_REGEN2_CFG_TRANS 0xB1 +#define TPS80031_REGEN2_CFG_STATE 0xB2 +#define TPS80031_SYSEN_CFG_TRANS 0xB4 +#define TPS80031_SYSEN_CFG_STATE 0xB5 + +/* PMC Slave Module Internal Control */ +#define TPS80031_NRESPWRON_CFG_TRANS 0xB7 +#define TPS80031_NRESPWRON_CFG_STATE 0xB8 +#define TPS80031_CLK32KAO_CFG_TRANS 0xBA +#define TPS80031_CLK32KAO_CFG_STATE 0xBB +#define TPS80031_CLK32KG_CFG_TRANS 0xBD +#define TPS80031_CLK32KG_CFG_STATE 0xBE +#define TPS80031_CLK32KAUDIO_CFG_TRANS 0xC0 +#define TPS80031_CLK32KAUDIO_CFG_STATE 0xC1 +#define TPS80031_VRTC_CFG_TRANS 0xC3 +#define TPS80031_VRTC_CFG_STATE 0xC4 +#define TPS80031_BIAS_CFG_TRANS 0xC6 +#define TPS80031_BIAS_CFG_STATE 0xC7 +#define TPS80031_VSYSMIN_HI_CFG_TRANS 0xC9 +#define TPS80031_VSYSMIN_HI_CFG_STATE 0xCA +#define TPS80031_RC6MHZ_CFG_TRANS 0xCC +#define TPS80031_RC6MHZ_CFG_STATE 0xCD +#define TPS80031_TMP_CFG_TRANS 0xCF +#define TPS80031_TMP_CFG_STATE 0xD0 + +/* PMC Slave Module resources assignment */ +#define TPS80031_PREQ1_RES_ASS_A 0xD7 +#define TPS80031_PREQ1_RES_ASS_B 0xD8 +#define TPS80031_PREQ1_RES_ASS_C 0xD9 +#define TPS80031_PREQ2_RES_ASS_A 0xDA +#define TPS80031_PREQ2_RES_ASS_B 0xDB +#define TPS80031_PREQ2_RES_ASS_C 0xDC +#define TPS80031_PREQ3_RES_ASS_A 0xDD +#define TPS80031_PREQ3_RES_ASS_B 0xDE +#define TPS80031_PREQ3_RES_ASS_C 0xDF + +/* PMC Slave Module Miscellaneous */ +#define TPS80031_SMPS_OFFSET 0xE0 +#define TPS80031_SMPS_MULT 0xE3 +#define TPS80031_MISC1 0xE4 +#define TPS80031_MISC2 0xE5 +#define TPS80031_BBSPOR_CFG 0xE6 +#define TPS80031_TMP_CFG 0xE7 + +/* Battery Charging Controller and Indicator LED */ +#define TPS80031_CONTROLLER_CTRL2 0xDA +#define TPS80031_CONTROLLER_VSEL_COMP 0xDB +#define TPS80031_CHARGERUSB_VSYSREG 0xDC +#define TPS80031_CHARGERUSB_VICHRG_PC 0xDD +#define TPS80031_LINEAR_CHRG_STS 0xDE +#define TPS80031_CONTROLLER_INT_MASK 0xE0 +#define TPS80031_CONTROLLER_CTRL1 0xE1 +#define TPS80031_CONTROLLER_WDG 0xE2 +#define TPS80031_CONTROLLER_STAT1 0xE3 +#define TPS80031_CHARGERUSB_INT_STATUS 0xE4 +#define TPS80031_CHARGERUSB_INT_MASK 0xE5 +#define TPS80031_CHARGERUSB_STATUS_INT1 0xE6 +#define TPS80031_CHARGERUSB_STATUS_INT2 0xE7 +#define TPS80031_CHARGERUSB_CTRL1 0xE8 +#define TPS80031_CHARGERUSB_CTRL2 0xE9 +#define TPS80031_CHARGERUSB_CTRL3 0xEA +#define TPS80031_CHARGERUSB_STAT1 0xEB +#define TPS80031_CHARGERUSB_VOREG 0xEC +#define TPS80031_CHARGERUSB_VICHRG 0xED +#define TPS80031_CHARGERUSB_CINLIMIT 0xEE +#define TPS80031_CHARGERUSB_CTRLLIMIT1 0xEF +#define TPS80031_CHARGERUSB_CTRLLIMIT2 0xF0 +#define TPS80031_LED_PWM_CTRL1 0xF4 +#define TPS80031_LED_PWM_CTRL2 0xF5 + +/* USB On-The-Go */ +#define TPS80031_BACKUP_REG 0xFA +#define TPS80031_USB_VENDOR_ID_LSB 0x00 +#define TPS80031_USB_VENDOR_ID_MSB 0x01 +#define TPS80031_USB_PRODUCT_ID_LSB 0x02 +#define TPS80031_USB_PRODUCT_ID_MSB 0x03 +#define TPS80031_USB_VBUS_CTRL_SET 0x04 +#define TPS80031_USB_VBUS_CTRL_CLR 0x05 +#define TPS80031_USB_ID_CTRL_SET 0x06 +#define TPS80031_USB_ID_CTRL_CLR 0x07 +#define TPS80031_USB_VBUS_INT_SRC 0x08 +#define TPS80031_USB_VBUS_INT_LATCH_SET 0x09 +#define TPS80031_USB_VBUS_INT_LATCH_CLR 0x0A +#define TPS80031_USB_VBUS_INT_EN_LO_SET 0x0B +#define TPS80031_USB_VBUS_INT_EN_LO_CLR 0x0C +#define TPS80031_USB_VBUS_INT_EN_HI_SET 0x0D +#define TPS80031_USB_VBUS_INT_EN_HI_CLR 0x0E +#define TPS80031_USB_ID_INT_SRC 0x0F +#define TPS80031_USB_ID_INT_LATCH_SET 0x10 +#define TPS80031_USB_ID_INT_LATCH_CLR 0x11 +#define TPS80031_USB_ID_INT_EN_LO_SET 0x12 +#define TPS80031_USB_ID_INT_EN_LO_CLR 0x13 +#define TPS80031_USB_ID_INT_EN_HI_SET 0x14 +#define TPS80031_USB_ID_INT_EN_HI_CLR 0x15 +#define TPS80031_USB_OTG_ADP_CTRL 0x16 +#define TPS80031_USB_OTG_ADP_HIGH 0x17 +#define TPS80031_USB_OTG_ADP_LOW 0x18 +#define TPS80031_USB_OTG_ADP_RISE 0x19 +#define TPS80031_USB_OTG_REVISION 0x1A + +/* Gas Gauge */ +#define TPS80031_FG_REG_00 0xC0 +#define TPS80031_FG_REG_01 0xC1 +#define TPS80031_FG_REG_02 0xC2 +#define TPS80031_FG_REG_03 0xC3 +#define TPS80031_FG_REG_04 0xC4 +#define TPS80031_FG_REG_05 0xC5 +#define TPS80031_FG_REG_06 0xC6 +#define TPS80031_FG_REG_07 0xC7 +#define TPS80031_FG_REG_08 0xC8 +#define TPS80031_FG_REG_09 0xC9 +#define TPS80031_FG_REG_10 0xCA +#define TPS80031_FG_REG_11 0xCB + +/* General Purpose ADC */ +#define TPS80031_GPADC_CTRL 0x2E +#define TPS80031_GPADC_CTRL2 0x2F +#define TPS80031_RTSELECT_LSB 0x32 +#define TPS80031_RTSELECT_ISB 0x33 +#define TPS80031_RTSELECT_MSB 0x34 +#define TPS80031_GPSELECT_ISB 0x35 +#define TPS80031_CTRL_P1 0x36 +#define TPS80031_RTCH0_LSB 0x37 +#define TPS80031_RTCH0_MSB 0x38 +#define TPS80031_RTCH1_LSB 0x39 +#define TPS80031_RTCH1_MSB 0x3A +#define TPS80031_GPCH0_LSB 0x3B +#define TPS80031_GPCH0_MSB 0x3C + +/* SIM, MMC and Battery Detection */ +#define TPS80031_SIMDEBOUNCING 0xEB +#define TPS80031_SIMCTRL 0xEC +#define TPS80031_MMCDEBOUNCING 0xED +#define TPS80031_MMCCTRL 0xEE +#define TPS80031_BATDEBOUNCING 0xEF + +/* Vibrator Driver and PWMs */ +#define TPS80031_VIBCTRL 0x9B +#define TPS80031_VIBMODE 0x9C +#define TPS80031_PWM1ON 0xBA +#define TPS80031_PWM1OFF 0xBB +#define TPS80031_PWM2ON 0xBD +#define TPS80031_PWM2OFF 0xBE + +/* Control Interface */ +#define TPS80031_INT_STS_A 0xD0 +#define TPS80031_INT_STS_B 0xD1 +#define TPS80031_INT_STS_C 0xD2 +#define TPS80031_INT_MSK_LINE_A 0xD3 +#define TPS80031_INT_MSK_LINE_B 0xD4 +#define TPS80031_INT_MSK_LINE_C 0xD5 +#define TPS80031_INT_MSK_STS_A 0xD6 +#define TPS80031_INT_MSK_STS_B 0xD7 +#define TPS80031_INT_MSK_STS_C 0xD8 +#define TPS80031_TOGGLE1 0x90 +#define TPS80031_TOGGLE2 0x91 +#define TPS80031_TOGGLE3 0x92 +#define TPS80031_PWDNSTATUS1 0x93 +#define TPS80031_PWDNSTATUS2 0x94 +#define TPS80031_VALIDITY0 0x17 +#define TPS80031_VALIDITY1 0x18 +#define TPS80031_VALIDITY2 0x19 +#define TPS80031_VALIDITY3 0x1A +#define TPS80031_VALIDITY4 0x1B +#define TPS80031_VALIDITY5 0x1C +#define TPS80031_VALIDITY6 0x1D +#define TPS80031_VALIDITY7 0x1E + +/* Version number related register */ +#define TPS80031_JTAGVERNUM 0x87 +#define TPS80031_EPROM_REV 0xDF + +/* GPADC Trimming Bits. */ +#define TPS80031_GPADC_TRIM0 0xCC +#define TPS80031_GPADC_TRIM1 0xCD +#define TPS80031_GPADC_TRIM2 0xCE +#define TPS80031_GPADC_TRIM3 0xCF +#define TPS80031_GPADC_TRIM4 0xD0 +#define TPS80031_GPADC_TRIM5 0xD1 +#define TPS80031_GPADC_TRIM6 0xD2 +#define TPS80031_GPADC_TRIM7 0xD3 +#define TPS80031_GPADC_TRIM8 0xD4 +#define TPS80031_GPADC_TRIM9 0xD5 +#define TPS80031_GPADC_TRIM10 0xD6 +#define TPS80031_GPADC_TRIM11 0xD7 +#define TPS80031_GPADC_TRIM12 0xD8 +#define TPS80031_GPADC_TRIM13 0xD9 +#define TPS80031_GPADC_TRIM14 0xDA +#define TPS80031_GPADC_TRIM15 0xDB +#define TPS80031_GPADC_TRIM16 0xDC +#define TPS80031_GPADC_TRIM17 0xDD +#define TPS80031_GPADC_TRIM18 0xDE + +/* TPS80031_CONTROLLER_STAT1 bit fields */ +#define TPS80031_CONTROLLER_STAT1_BAT_TEMP 0 +#define TPS80031_CONTROLLER_STAT1_BAT_REMOVED 1 +#define TPS80031_CONTROLLER_STAT1_VBUS_DET 2 +#define TPS80031_CONTROLLER_STAT1_VAC_DET 3 +#define TPS80031_CONTROLLER_STAT1_FAULT_WDG 4 +#define TPS80031_CONTROLLER_STAT1_LINCH_GATED 6 +/* TPS80031_CONTROLLER_INT_MASK bit filed */ +#define TPS80031_CONTROLLER_INT_MASK_MVAC_DET 0 +#define TPS80031_CONTROLLER_INT_MASK_MVBUS_DET 1 +#define TPS80031_CONTROLLER_INT_MASK_MBAT_TEMP 2 +#define TPS80031_CONTROLLER_INT_MASK_MFAULT_WDG 3 +#define TPS80031_CONTROLLER_INT_MASK_MBAT_REMOVED 4 +#define TPS80031_CONTROLLER_INT_MASK_MLINCH_GATED 5 + +#define TPS80031_CHARGE_CONTROL_SUB_INT_MASK 0x3F + +/* TPS80031_PHOENIX_DEV_ON bit field */ +#define TPS80031_DEVOFF 0x1 + +#define TPS80031_EXT_CONTROL_CFG_TRANS 0 +#define TPS80031_EXT_CONTROL_CFG_STATE 1 + +/* State register field */ +#define TPS80031_STATE_OFF 0x00 +#define TPS80031_STATE_ON 0x01 +#define TPS80031_STATE_MASK 0x03 + +/* Trans register field */ +#define TPS80031_TRANS_ACTIVE_OFF 0x00 +#define TPS80031_TRANS_ACTIVE_ON 0x01 +#define TPS80031_TRANS_ACTIVE_MASK 0x03 +#define TPS80031_TRANS_SLEEP_OFF 0x00 +#define TPS80031_TRANS_SLEEP_ON 0x04 +#define TPS80031_TRANS_SLEEP_MASK 0x0C +#define TPS80031_TRANS_OFF_OFF 0x00 +#define TPS80031_TRANS_OFF_ACTIVE 0x10 +#define TPS80031_TRANS_OFF_MASK 0x30 + +#define TPS80031_EXT_PWR_REQ (TPS80031_PWR_REQ_INPUT_PREQ1 | \ + TPS80031_PWR_REQ_INPUT_PREQ2 | \ + TPS80031_PWR_REQ_INPUT_PREQ3) + +/* TPS80031_BBSPOR_CFG bit field */ +#define TPS80031_BBSPOR_CHG_EN 0x8 +#define TPS80031_MAX_REGISTER 0xFF + +struct i2c_client; + +/* Supported chips */ +enum chips { + TPS80031 = 0x00000001, + TPS80032 = 0x00000002, +}; + +enum { + TPS80031_INT_PWRON, + TPS80031_INT_RPWRON, + TPS80031_INT_SYS_VLOW, + TPS80031_INT_RTC_ALARM, + TPS80031_INT_RTC_PERIOD, + TPS80031_INT_HOT_DIE, + TPS80031_INT_VXX_SHORT, + TPS80031_INT_SPDURATION, + TPS80031_INT_WATCHDOG, + TPS80031_INT_BAT, + TPS80031_INT_SIM, + TPS80031_INT_MMC, + TPS80031_INT_RES, + TPS80031_INT_GPADC_RT, + TPS80031_INT_GPADC_SW2_EOC, + TPS80031_INT_CC_AUTOCAL, + TPS80031_INT_ID_WKUP, + TPS80031_INT_VBUSS_WKUP, + TPS80031_INT_ID, + TPS80031_INT_VBUS, + TPS80031_INT_CHRG_CTRL, + TPS80031_INT_EXT_CHRG, + TPS80031_INT_INT_CHRG, + TPS80031_INT_RES2, + TPS80031_INT_BAT_TEMP_OVRANGE, + TPS80031_INT_BAT_REMOVED, + TPS80031_INT_VBUS_DET, + TPS80031_INT_VAC_DET, + TPS80031_INT_FAULT_WDG, + TPS80031_INT_LINCH_GATED, + + /* Last interrupt id to get the end number */ + TPS80031_INT_NR, +}; + +/* TPS80031 Slave IDs */ +#define TPS80031_NUM_SLAVES 4 +#define TPS80031_SLAVE_ID0 0 +#define TPS80031_SLAVE_ID1 1 +#define TPS80031_SLAVE_ID2 2 +#define TPS80031_SLAVE_ID3 3 + +/* TPS80031 I2C addresses */ +#define TPS80031_I2C_ID0_ADDR 0x12 +#define TPS80031_I2C_ID1_ADDR 0x48 +#define TPS80031_I2C_ID2_ADDR 0x49 +#define TPS80031_I2C_ID3_ADDR 0x4A + +enum { + TPS80031_REGULATOR_VIO, + TPS80031_REGULATOR_SMPS1, + TPS80031_REGULATOR_SMPS2, + TPS80031_REGULATOR_SMPS3, + TPS80031_REGULATOR_SMPS4, + TPS80031_REGULATOR_VANA, + TPS80031_REGULATOR_LDO1, + TPS80031_REGULATOR_LDO2, + TPS80031_REGULATOR_LDO3, + TPS80031_REGULATOR_LDO4, + TPS80031_REGULATOR_LDO5, + TPS80031_REGULATOR_LDO6, + TPS80031_REGULATOR_LDO7, + TPS80031_REGULATOR_LDOLN, + TPS80031_REGULATOR_LDOUSB, + TPS80031_REGULATOR_VBUS, + TPS80031_REGULATOR_REGEN1, + TPS80031_REGULATOR_REGEN2, + TPS80031_REGULATOR_SYSEN, + TPS80031_REGULATOR_MAX, +}; + +/* Different configurations for the rails */ +enum { + /* USBLDO input selection */ + TPS80031_USBLDO_INPUT_VSYS = 0x00000001, + TPS80031_USBLDO_INPUT_PMID = 0x00000002, + + /* LDO3 output mode */ + TPS80031_LDO3_OUTPUT_VIB = 0x00000004, + + /* VBUS configuration */ + TPS80031_VBUS_DISCHRG_EN_PDN = 0x00000004, + TPS80031_VBUS_SW_ONLY = 0x00000008, + TPS80031_VBUS_SW_N_ID = 0x00000010, +}; + +/* External controls requests */ +enum tps80031_ext_control { + TPS80031_PWR_REQ_INPUT_NONE = 0x00000000, + TPS80031_PWR_REQ_INPUT_PREQ1 = 0x00000001, + TPS80031_PWR_REQ_INPUT_PREQ2 = 0x00000002, + TPS80031_PWR_REQ_INPUT_PREQ3 = 0x00000004, + TPS80031_PWR_OFF_ON_SLEEP = 0x00000008, + TPS80031_PWR_ON_ON_SLEEP = 0x00000010, +}; + +enum tps80031_pupd_pins { + TPS80031_PREQ1 = 0, + TPS80031_PREQ2A, + TPS80031_PREQ2B, + TPS80031_PREQ2C, + TPS80031_PREQ3, + TPS80031_NRES_WARM, + TPS80031_PWM_FORCE, + TPS80031_CHRG_EXT_CHRG_STATZ, + TPS80031_SIM, + TPS80031_MMC, + TPS80031_GPADC_START, + TPS80031_DVSI2C_SCL, + TPS80031_DVSI2C_SDA, + TPS80031_CTLI2C_SCL, + TPS80031_CTLI2C_SDA, +}; + +enum tps80031_pupd_settings { + TPS80031_PUPD_NORMAL, + TPS80031_PUPD_PULLDOWN, + TPS80031_PUPD_PULLUP, +}; + +struct tps80031 { + struct device *dev; + unsigned long chip_info; + int es_version; + struct i2c_client *clients[TPS80031_NUM_SLAVES]; + struct regmap *regmap[TPS80031_NUM_SLAVES]; + struct regmap_irq_chip_data *irq_data; +}; + +struct tps80031_pupd_init_data { + int input_pin; + int setting; +}; + +/* + * struct tps80031_regulator_platform_data - tps80031 regulator platform data. + * + * @reg_init_data: The regulator init data. + * @ext_ctrl_flag: External control flag for sleep/power request control. + * @config_flags: Configuration flag to configure the rails. + * It should be ORed of config enums. + */ + +struct tps80031_regulator_platform_data { + struct regulator_init_data *reg_init_data; + unsigned int ext_ctrl_flag; + unsigned int config_flags; +}; + +struct tps80031_platform_data { + int irq_base; + bool use_power_off; + struct tps80031_pupd_init_data *pupd_init_data; + int pupd_init_data_size; + struct tps80031_regulator_platform_data + *regulator_pdata[TPS80031_REGULATOR_MAX]; +}; + +static inline int tps80031_write(struct device *dev, int sid, + int reg, uint8_t val) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + + return regmap_write(tps80031->regmap[sid], reg, val); +} + +static inline int tps80031_writes(struct device *dev, int sid, int reg, + int len, uint8_t *val) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + + return regmap_bulk_write(tps80031->regmap[sid], reg, val, len); +} + +static inline int tps80031_read(struct device *dev, int sid, + int reg, uint8_t *val) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + unsigned int ival; + int ret; + + ret = regmap_read(tps80031->regmap[sid], reg, &ival); + if (ret < 0) { + dev_err(dev, "failed reading from reg 0x%02x\n", reg); + return ret; + } + + *val = ival; + return ret; +} + +static inline int tps80031_reads(struct device *dev, int sid, + int reg, int len, uint8_t *val) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + + return regmap_bulk_read(tps80031->regmap[sid], reg, val, len); +} + +static inline int tps80031_set_bits(struct device *dev, int sid, + int reg, uint8_t bit_mask) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + + return regmap_update_bits(tps80031->regmap[sid], reg, + bit_mask, bit_mask); +} + +static inline int tps80031_clr_bits(struct device *dev, int sid, + int reg, uint8_t bit_mask) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + + return regmap_update_bits(tps80031->regmap[sid], reg, bit_mask, 0); +} + +static inline int tps80031_update(struct device *dev, int sid, + int reg, uint8_t val, uint8_t mask) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + + return regmap_update_bits(tps80031->regmap[sid], reg, mask, val); +} + +static inline unsigned long tps80031_get_chip_info(struct device *dev) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + + return tps80031->chip_info; +} + +static inline int tps80031_get_pmu_version(struct device *dev) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + + return tps80031->es_version; +} + +static inline int tps80031_irq_get_virq(struct device *dev, int irq) +{ + struct tps80031 *tps80031 = dev_get_drvdata(dev); + + return regmap_irq_get_virq(tps80031->irq_data, irq); +} + +extern int tps80031_ext_power_req_config(struct device *dev, + unsigned long ext_ctrl_flag, int preq_bit, + int state_reg_add, int trans_reg_add); +#endif /*__LINUX_MFD_TPS80031_H */ diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h index a8eff4ad9be5..94ac944d12f0 100644 --- a/include/linux/mfd/twl6040.h +++ b/include/linux/mfd/twl6040.h @@ -207,10 +207,12 @@ struct twl6040_platform_data { }; struct regmap; +struct regmap_irq_chips_data; struct twl6040 { struct device *dev; struct regmap *regmap; + struct regmap_irq_chip_data *irq_data; struct regulator_bulk_data supplies[2]; /* supplies for vio, v2v1 */ struct mutex mutex; struct mutex irq_mutex; @@ -228,9 +230,8 @@ struct twl6040 { unsigned int mclk; unsigned int irq; - unsigned int irq_base; - u8 irq_masks_cur; - u8 irq_masks_cache; + unsigned int irq_ready; + unsigned int irq_th; }; int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg); @@ -245,8 +246,7 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id, unsigned int freq_in, unsigned int freq_out); int twl6040_get_pll(struct twl6040 *twl6040); unsigned int twl6040_get_sysclk(struct twl6040 *twl6040); -int twl6040_irq_init(struct twl6040 *twl6040); -void twl6040_irq_exit(struct twl6040 *twl6040); + /* Get the combined status of the vibra control register */ int twl6040_get_vibralr_status(struct twl6040 *twl6040); diff --git a/include/linux/mfd/viperboard.h b/include/linux/mfd/viperboard.h new file mode 100644 index 000000000000..193452848c04 --- /dev/null +++ b/include/linux/mfd/viperboard.h @@ -0,0 +1,110 @@ +/* + * include/linux/mfd/viperboard.h + * + * Nano River Technologies viperboard definitions + * + * (C) 2012 by Lemonage GmbH + * Author: Lars Poeschel <poeschel@lemonage.de> + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MFD_VIPERBOARD_H__ +#define __MFD_VIPERBOARD_H__ + +#include <linux/types.h> +#include <linux/usb.h> + +#define VPRBRD_EP_OUT 0x02 +#define VPRBRD_EP_IN 0x86 + +#define VPRBRD_I2C_MSG_LEN 512 /* max length of a msg on USB level */ + +#define VPRBRD_I2C_FREQ_6MHZ 1 /* 6 MBit/s */ +#define VPRBRD_I2C_FREQ_3MHZ 2 /* 3 MBit/s */ +#define VPRBRD_I2C_FREQ_1MHZ 3 /* 1 MBit/s */ +#define VPRBRD_I2C_FREQ_FAST 4 /* 400 kbit/s */ +#define VPRBRD_I2C_FREQ_400KHZ VPRBRD_I2C_FREQ_FAST +#define VPRBRD_I2C_FREQ_200KHZ 5 /* 200 kbit/s */ +#define VPRBRD_I2C_FREQ_STD 6 /* 100 kbit/s */ +#define VPRBRD_I2C_FREQ_100KHZ VPRBRD_I2C_FREQ_STD +#define VPRBRD_I2C_FREQ_10KHZ 7 /* 10 kbit/s */ + +#define VPRBRD_I2C_CMD_WRITE 0x00 +#define VPRBRD_I2C_CMD_READ 0x01 +#define VPRBRD_I2C_CMD_ADDR 0x02 + +#define VPRBRD_USB_TYPE_OUT 0x40 +#define VPRBRD_USB_TYPE_IN 0xc0 +#define VPRBRD_USB_TIMEOUT_MS 100 +#define VPRBRD_USB_REQUEST_I2C_FREQ 0xe6 +#define VPRBRD_USB_REQUEST_I2C 0xe9 +#define VPRBRD_USB_REQUEST_MAJOR 0xea +#define VPRBRD_USB_REQUEST_MINOR 0xeb +#define VPRBRD_USB_REQUEST_ADC 0xec +#define VPRBRD_USB_REQUEST_GPIOA 0xed +#define VPRBRD_USB_REQUEST_GPIOB 0xdd + +struct vprbrd_i2c_write_hdr { + u8 cmd; + u16 addr; + u8 len1; + u8 len2; + u8 last; + u8 chan; + u16 spi; +} __packed; + +struct vprbrd_i2c_read_hdr { + u8 cmd; + u16 addr; + u8 len0; + u8 len1; + u8 len2; + u8 len3; + u8 len4; + u8 len5; + u16 tf1; /* transfer 1 length */ + u16 tf2; /* transfer 2 length */ +} __packed; + +struct vprbrd_i2c_status { + u8 unknown[11]; + u8 status; +} __packed; + +struct vprbrd_i2c_write_msg { + struct vprbrd_i2c_write_hdr header; + u8 data[VPRBRD_I2C_MSG_LEN + - sizeof(struct vprbrd_i2c_write_hdr)]; +} __packed; + +struct vprbrd_i2c_read_msg { + struct vprbrd_i2c_read_hdr header; + u8 data[VPRBRD_I2C_MSG_LEN + - sizeof(struct vprbrd_i2c_read_hdr)]; +} __packed; + +struct vprbrd_i2c_addr_msg { + u8 cmd; + u8 addr; + u8 unknown1; + u16 len; + u8 unknown2; + u8 unknown3; +} __packed; + +/* Structure to hold all device specific stuff */ +struct vprbrd { + struct usb_device *usb_dev; /* the usb device for this device */ + struct mutex lock; + u8 buf[sizeof(struct vprbrd_i2c_write_msg)]; + struct platform_device pdev; +}; + +#endif /* __MFD_VIPERBOARD_H__ */ diff --git a/include/linux/mfd/wm8994/core.h b/include/linux/mfd/wm8994/core.h index 1f173306bf05..ae5c249530b4 100644 --- a/include/linux/mfd/wm8994/core.h +++ b/include/linux/mfd/wm8994/core.h @@ -19,6 +19,8 @@ #include <linux/interrupt.h> #include <linux/regmap.h> +#include <linux/mfd/wm8994/pdata.h> + enum wm8994_type { WM8994 = 0, WM8958 = 1, @@ -55,6 +57,8 @@ struct regulator_bulk_data; struct wm8994 { struct mutex irq_lock; + struct wm8994_pdata pdata; + enum wm8994_type type; int revision; int cust_id; diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h index fc87be4fdc25..8e21a094836d 100644 --- a/include/linux/mfd/wm8994/pdata.h +++ b/include/linux/mfd/wm8994/pdata.h @@ -176,6 +176,11 @@ struct wm8994_pdata { unsigned int lineout1fb:1; unsigned int lineout2fb:1; + /* Delay between detecting a jack and starting microphone + * detect (specified in ms) + */ + int micdet_delay; + /* IRQ for microphone detection if brought out directly as a * signal. */ diff --git a/include/linux/micrel_phy.h b/include/linux/micrel_phy.h index de201203bc7c..adfe8c058f29 100644 --- a/include/linux/micrel_phy.h +++ b/include/linux/micrel_phy.h @@ -15,6 +15,7 @@ #define MICREL_PHY_ID_MASK 0x00fffff0 +#define PHY_ID_KSZ8873MLL 0x000e7237 #define PHY_ID_KSZ9021 0x00221610 #define PHY_ID_KS8737 0x00221720 #define PHY_ID_KSZ8021 0x00221555 diff --git a/include/linux/migrate.h b/include/linux/migrate.h index ce7e6671968b..1e9f627967a3 100644 --- a/include/linux/migrate.h +++ b/include/linux/migrate.h @@ -7,14 +7,41 @@ typedef struct page *new_page_t(struct page *, unsigned long private, int **); +/* + * Return values from addresss_space_operations.migratepage(): + * - negative errno on page migration failure; + * - zero on page migration success; + * + * The balloon page migration introduces this special case where a 'distinct' + * return code is used to flag a successful page migration to unmap_and_move(). + * This approach is necessary because page migration can race against balloon + * deflation procedure, and for such case we could introduce a nasty page leak + * if a successfully migrated balloon page gets released concurrently with + * migration's unmap_and_move() wrap-up steps. + */ +#define MIGRATEPAGE_SUCCESS 0 +#define MIGRATEPAGE_BALLOON_SUCCESS 1 /* special ret code for balloon page + * sucessful migration case. + */ +enum migrate_reason { + MR_COMPACTION, + MR_MEMORY_FAILURE, + MR_MEMORY_HOTPLUG, + MR_SYSCALL, /* also applies to cpusets */ + MR_MEMPOLICY_MBIND, + MR_NUMA_MISPLACED, + MR_CMA +}; + #ifdef CONFIG_MIGRATION extern void putback_lru_pages(struct list_head *l); +extern void putback_movable_pages(struct list_head *l); extern int migrate_page(struct address_space *, struct page *, struct page *, enum migrate_mode); extern int migrate_pages(struct list_head *l, new_page_t x, unsigned long private, bool offlining, - enum migrate_mode mode); + enum migrate_mode mode, int reason); extern int migrate_huge_page(struct page *, new_page_t x, unsigned long private, bool offlining, enum migrate_mode mode); @@ -33,9 +60,10 @@ extern int migrate_huge_page_move_mapping(struct address_space *mapping, #else static inline void putback_lru_pages(struct list_head *l) {} +static inline void putback_movable_pages(struct list_head *l) {} static inline int migrate_pages(struct list_head *l, new_page_t x, unsigned long private, bool offlining, - enum migrate_mode mode) { return -ENOSYS; } + enum migrate_mode mode, int reason) { return -ENOSYS; } static inline int migrate_huge_page(struct page *page, new_page_t x, unsigned long private, bool offlining, enum migrate_mode mode) { return -ENOSYS; } @@ -64,4 +92,37 @@ static inline int migrate_huge_page_move_mapping(struct address_space *mapping, #define fail_migrate_page NULL #endif /* CONFIG_MIGRATION */ + +#ifdef CONFIG_NUMA_BALANCING +extern int migrate_misplaced_page(struct page *page, int node); +extern int migrate_misplaced_page(struct page *page, int node); +extern bool migrate_ratelimited(int node); +#else +static inline int migrate_misplaced_page(struct page *page, int node) +{ + return -EAGAIN; /* can't migrate now */ +} +static inline bool migrate_ratelimited(int node) +{ + return false; +} +#endif /* CONFIG_NUMA_BALANCING */ + +#if defined(CONFIG_NUMA_BALANCING) && defined(CONFIG_TRANSPARENT_HUGEPAGE) +extern int migrate_misplaced_transhuge_page(struct mm_struct *mm, + struct vm_area_struct *vma, + pmd_t *pmd, pmd_t entry, + unsigned long address, + struct page *page, int node); +#else +static inline int migrate_misplaced_transhuge_page(struct mm_struct *mm, + struct vm_area_struct *vma, + pmd_t *pmd, pmd_t entry, + unsigned long address, + struct page *page, int node) +{ + return -EAGAIN; +} +#endif /* CONFIG_NUMA_BALANCING && CONFIG_TRANSPARENT_HUGEPAGE*/ + #endif /* _LINUX_MIGRATE_H */ diff --git a/include/linux/miscdevice.h b/include/linux/miscdevice.h index e0deeb2cc939..09c2300ddb37 100644 --- a/include/linux/miscdevice.h +++ b/include/linux/miscdevice.h @@ -34,6 +34,7 @@ #define MWAVE_MINOR 219 /* ACP/Mwave Modem */ #define MPT_MINOR 220 #define MPT2SAS_MINOR 221 +#define MPT3SAS_MINOR 222 #define UINPUT_MINOR 223 #define MISC_MCELOG_MINOR 227 #define HPET_MINOR 228 diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index 6d1acb04cd17..21821da2abfd 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -142,6 +142,8 @@ enum { MLX4_DEV_CAP_FLAG_COUNTERS = 1LL << 48, MLX4_DEV_CAP_FLAG_SENSE_SUPPORT = 1LL << 55, MLX4_DEV_CAP_FLAG_PORT_MNG_CHG_EV = 1LL << 59, + MLX4_DEV_CAP_FLAG_64B_EQE = 1LL << 61, + MLX4_DEV_CAP_FLAG_64B_CQE = 1LL << 62 }; enum { @@ -151,6 +153,20 @@ enum { MLX4_DEV_CAP_FLAG2_FS_EN = 1LL << 3 }; +enum { + MLX4_DEV_CAP_64B_EQE_ENABLED = 1LL << 0, + MLX4_DEV_CAP_64B_CQE_ENABLED = 1LL << 1 +}; + +enum { + MLX4_USER_DEV_CAP_64B_CQE = 1L << 0 +}; + +enum { + MLX4_FUNC_CAP_64B_EQE_CQE = 1L << 0 +}; + + #define MLX4_ATTR_EXTENDED_PORT_INFO cpu_to_be16(0xff90) enum { @@ -419,6 +435,11 @@ struct mlx4_caps { u32 max_counters; u8 port_ib_mtu[MLX4_MAX_PORTS + 1]; u16 sqp_demux; + u32 eqe_size; + u32 cqe_size; + u8 eqe_factor; + u32 userspace_caps; /* userspace must be aware of these */ + u32 function_caps; /* VFs must be aware of these */ }; struct mlx4_buf_list { diff --git a/include/linux/mm.h b/include/linux/mm.h index fa0680402738..7f4f906190bd 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -693,6 +693,36 @@ static inline int page_to_nid(const struct page *page) } #endif +#ifdef CONFIG_NUMA_BALANCING +static inline int page_xchg_last_nid(struct page *page, int nid) +{ + return xchg(&page->_last_nid, nid); +} + +static inline int page_last_nid(struct page *page) +{ + return page->_last_nid; +} +static inline void reset_page_last_nid(struct page *page) +{ + page->_last_nid = -1; +} +#else +static inline int page_xchg_last_nid(struct page *page, int nid) +{ + return page_to_nid(page); +} + +static inline int page_last_nid(struct page *page) +{ + return page_to_nid(page); +} + +static inline void reset_page_last_nid(struct page *page) +{ +} +#endif + static inline struct zone *page_zone(const struct page *page) { return &NODE_DATA(page_to_nid(page))->node_zones[page_zonenum(page)]; @@ -1078,6 +1108,9 @@ extern unsigned long move_page_tables(struct vm_area_struct *vma, extern unsigned long do_mremap(unsigned long addr, unsigned long old_len, unsigned long new_len, unsigned long flags, unsigned long new_addr); +extern unsigned long change_protection(struct vm_area_struct *vma, unsigned long start, + unsigned long end, pgprot_t newprot, + int dirty_accountable, int prot_numa); extern int mprotect_fixup(struct vm_area_struct *vma, struct vm_area_struct **pprev, unsigned long start, unsigned long end, unsigned long newflags); @@ -1456,6 +1489,37 @@ extern unsigned long vm_mmap(struct file *, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long); +struct vm_unmapped_area_info { +#define VM_UNMAPPED_AREA_TOPDOWN 1 + unsigned long flags; + unsigned long length; + unsigned long low_limit; + unsigned long high_limit; + unsigned long align_mask; + unsigned long align_offset; +}; + +extern unsigned long unmapped_area(struct vm_unmapped_area_info *info); +extern unsigned long unmapped_area_topdown(struct vm_unmapped_area_info *info); + +/* + * Search for an unmapped address range. + * + * We are looking for a range that: + * - does not intersect with any VMA; + * - is contained within the [low_limit, high_limit) interval; + * - is at least the desired size. + * - satisfies (begin_addr & align_mask) == (align_offset & align_mask) + */ +static inline unsigned long +vm_unmapped_area(struct vm_unmapped_area_info *info) +{ + if (!(info->flags & VM_UNMAPPED_AREA_TOPDOWN)) + return unmapped_area(info); + else + return unmapped_area_topdown(info); +} + /* truncate.c */ extern void truncate_inode_pages(struct address_space *, loff_t); extern void truncate_inode_pages_range(struct address_space *, @@ -1548,6 +1612,11 @@ static inline pgprot_t vm_get_page_prot(unsigned long vm_flags) } #endif +#ifdef CONFIG_ARCH_USES_NUMA_PROT_NONE +unsigned long change_prot_numa(struct vm_area_struct *vma, + unsigned long start, unsigned long end); +#endif + struct vm_area_struct *find_extend_vma(struct mm_struct *, unsigned long addr); int remap_pfn_range(struct vm_area_struct *, unsigned long addr, unsigned long pfn, unsigned long size, pgprot_t); @@ -1569,6 +1638,7 @@ struct page *follow_page(struct vm_area_struct *, unsigned long address, #define FOLL_MLOCK 0x40 /* mark page as mlocked */ #define FOLL_SPLIT 0x80 /* don't return transhuge pages, split them */ #define FOLL_HWPOISON 0x100 /* check page is hwpoisoned */ +#define FOLL_NUMA 0x200 /* force NUMA hinting page fault */ typedef int (*pte_fn_t)(pte_t *pte, pgtable_t token, unsigned long addr, void *data); @@ -1684,9 +1754,5 @@ static inline unsigned int debug_guardpage_minorder(void) { return 0; } static inline bool page_is_guard(struct page *page) { return false; } #endif /* CONFIG_DEBUG_PAGEALLOC */ -extern void reset_zone_present_pages(void); -extern void fixup_zone_present_pages(int nid, unsigned long start_pfn, - unsigned long end_pfn); - #endif /* __KERNEL__ */ #endif /* _LINUX_MM_H */ diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 31f8a3af7d94..f8f5162a3571 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -128,10 +128,7 @@ struct page { }; struct list_head list; /* slobs list of pages */ - struct { /* slab fields */ - struct kmem_cache *slab_cache; - struct slab *slab_page; - }; + struct slab *slab_page; /* slab fields */ }; /* Remainder is not double word aligned */ @@ -146,7 +143,7 @@ struct page { #if USE_SPLIT_PTLOCKS spinlock_t ptl; #endif - struct kmem_cache *slab; /* SLUB: Pointer to slab */ + struct kmem_cache *slab_cache; /* SL[AU]B: Pointer to slab */ struct page *first_page; /* Compound tail pages */ }; @@ -175,6 +172,10 @@ struct page { */ void *shadow; #endif + +#ifdef CONFIG_NUMA_BALANCING + int _last_nid; +#endif } /* * The struct page can be forced to be double word aligned so that atomic ops @@ -224,7 +225,8 @@ struct vm_region { * library, the executable area etc). */ struct vm_area_struct { - struct mm_struct * vm_mm; /* The address space we belong to. */ + /* The first cache line has the info for VMA tree walking. */ + unsigned long vm_start; /* Our start address within vm_mm. */ unsigned long vm_end; /* The first byte after our end address within vm_mm. */ @@ -232,11 +234,22 @@ struct vm_area_struct { /* linked list of VM areas per task, sorted by address */ struct vm_area_struct *vm_next, *vm_prev; + struct rb_node vm_rb; + + /* + * Largest free memory gap in bytes to the left of this VMA. + * Either between this VMA and vma->vm_prev, or between one of the + * VMAs below us in the VMA rbtree and its ->vm_prev. This helps + * get_unmapped_area find a free area of the right size. + */ + unsigned long rb_subtree_gap; + + /* Second cache line starts here. */ + + struct mm_struct *vm_mm; /* The address space we belong to. */ pgprot_t vm_page_prot; /* Access permissions of this VMA. */ unsigned long vm_flags; /* Flags, see mm.h. */ - struct rb_node vm_rb; - /* * For areas with an address space and backing store, * linkage into the address_space->i_mmap interval tree, or @@ -322,6 +335,7 @@ struct mm_struct { unsigned long task_size; /* size of task vm space */ unsigned long cached_hole_size; /* if non-zero, the largest hole below free_area_cache */ unsigned long free_area_cache; /* first hole of size cached_hole_size or larger */ + unsigned long highest_vm_end; /* highest vma end address */ pgd_t * pgd; atomic_t mm_users; /* How many users with user space? */ atomic_t mm_count; /* How many references to "struct mm_struct" (users count as 1) */ @@ -398,9 +412,36 @@ struct mm_struct { #ifdef CONFIG_CPUMASK_OFFSTACK struct cpumask cpumask_allocation; #endif +#ifdef CONFIG_NUMA_BALANCING + /* + * numa_next_scan is the next time when the PTEs will me marked + * pte_numa to gather statistics and migrate pages to new nodes + * if necessary + */ + unsigned long numa_next_scan; + + /* numa_next_reset is when the PTE scanner period will be reset */ + unsigned long numa_next_reset; + + /* Restart point for scanning and setting pte_numa */ + unsigned long numa_scan_offset; + + /* numa_scan_seq prevents two threads setting pte_numa */ + int numa_scan_seq; + + /* + * The first node a task was scheduled on. If a task runs on + * a different node than Make PTE Scan Go Now. + */ + int first_nid; +#endif struct uprobes_state uprobes_state; }; +/* first nid will either be a valid NID or one of these values */ +#define NUMA_PTE_SCAN_INIT -1 +#define NUMA_PTE_SCAN_ACTIVE -2 + static inline void mm_init_cpumask(struct mm_struct *mm) { #ifdef CONFIG_CPUMASK_OFFSTACK diff --git a/include/linux/mman.h b/include/linux/mman.h index d09dde1e57fb..9aa863da287f 100644 --- a/include/linux/mman.h +++ b/include/linux/mman.h @@ -11,6 +11,8 @@ extern int sysctl_overcommit_memory; extern int sysctl_overcommit_ratio; extern struct percpu_counter vm_committed_as; +unsigned long vm_memory_committed(void); + static inline void vm_acct_memory(long pages) { percpu_counter_add(&vm_committed_as, pages); diff --git a/include/linux/mmc/Kbuild b/include/linux/mmc/Kbuild deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/include/linux/mmc/Kbuild +++ /dev/null diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 943550dfe9ea..5c69315d60cc 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -85,6 +85,7 @@ struct mmc_ext_csd { bool boot_ro_lockable; u8 raw_exception_status; /* 53 */ u8 raw_partition_support; /* 160 */ + u8 raw_rpmb_size_mult; /* 168 */ u8 raw_erased_mem_count; /* 181 */ u8 raw_ext_csd_structure; /* 194 */ u8 raw_card_type; /* 196 */ @@ -206,6 +207,7 @@ struct mmc_part { #define MMC_BLK_DATA_AREA_MAIN (1<<0) #define MMC_BLK_DATA_AREA_BOOT (1<<1) #define MMC_BLK_DATA_AREA_GP (1<<2) +#define MMC_BLK_DATA_AREA_RPMB (1<<3) }; /* diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h index 9b9cdafc7737..5bf7c2274fcb 100644 --- a/include/linux/mmc/core.h +++ b/include/linux/mmc/core.h @@ -170,6 +170,8 @@ extern int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from, extern unsigned int mmc_calc_max_discard(struct mmc_card *card); extern int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen); +extern int mmc_set_blockcount(struct mmc_card *card, unsigned int blockcount, + bool is_rel_write); extern int mmc_hw_reset(struct mmc_host *host); extern int mmc_hw_reset_check(struct mmc_host *host); extern int mmc_can_reset(struct mmc_card *card); diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h index 7c6a1139d8fa..34be4f47293c 100644 --- a/include/linux/mmc/dw_mmc.h +++ b/include/linux/mmc/dw_mmc.h @@ -137,7 +137,7 @@ struct dw_mci { dma_addr_t sg_dma; void *sg_cpu; - struct dw_mci_dma_ops *dma_ops; + const struct dw_mci_dma_ops *dma_ops; #ifdef CONFIG_MMC_DW_IDMAC unsigned int ring_size; #else @@ -162,7 +162,7 @@ struct dw_mci { u16 data_offset; struct device *dev; struct dw_mci_board *pdata; - struct dw_mci_drv_data *drv_data; + const struct dw_mci_drv_data *drv_data; void *priv; struct clk *biu_clk; struct clk *ciu_clk; @@ -186,7 +186,7 @@ struct dw_mci { struct regulator *vmmc; /* Power regulator */ unsigned long irq_flags; /* IRQ flags */ - unsigned int irq; + int irq; }; /* DMA ops for Internal/External DMAC interface */ @@ -229,8 +229,9 @@ struct dw_mci_board { u32 quirks; /* Workaround / Quirk flags */ unsigned int bus_hz; /* Clock speed at the cclk_in pad */ - unsigned int caps; /* Capabilities */ - unsigned int caps2; /* More capabilities */ + u32 caps; /* Capabilities */ + u32 caps2; /* More capabilities */ + u32 pm_caps; /* PM capabilities */ /* * Override fifo depth. If 0, autodetect it from the FIFOTH register, * but note that this may not be reliable after a bootloader has used diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 7abb0e1f7bda..61a10c17aabd 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -53,12 +53,12 @@ struct mmc_ios { #define MMC_TIMING_LEGACY 0 #define MMC_TIMING_MMC_HS 1 #define MMC_TIMING_SD_HS 2 -#define MMC_TIMING_UHS_SDR12 MMC_TIMING_LEGACY -#define MMC_TIMING_UHS_SDR25 MMC_TIMING_SD_HS -#define MMC_TIMING_UHS_SDR50 3 -#define MMC_TIMING_UHS_SDR104 4 -#define MMC_TIMING_UHS_DDR50 5 -#define MMC_TIMING_MMC_HS200 6 +#define MMC_TIMING_UHS_SDR12 3 +#define MMC_TIMING_UHS_SDR25 4 +#define MMC_TIMING_UHS_SDR50 5 +#define MMC_TIMING_UHS_SDR104 6 +#define MMC_TIMING_UHS_DDR50 7 +#define MMC_TIMING_MMC_HS200 8 #define MMC_SDR_MODE 0 #define MMC_1_2V_DDR_MODE 1 @@ -136,6 +136,7 @@ struct mmc_host_ops { void (*enable_preset_value)(struct mmc_host *host, bool enable); int (*select_drive_strength)(unsigned int max_dtr, int host_drv, int card_drv); void (*hw_reset)(struct mmc_host *host); + void (*card_event)(struct mmc_host *host); }; struct mmc_card; @@ -211,7 +212,7 @@ struct mmc_host { #define MMC_VDD_34_35 0x00400000 /* VDD voltage 3.4 ~ 3.5 */ #define MMC_VDD_35_36 0x00800000 /* VDD voltage 3.5 ~ 3.6 */ - unsigned long caps; /* Host capabilities */ + u32 caps; /* Host capabilities */ #define MMC_CAP_4_BIT_DATA (1 << 0) /* Can the host do 4 bit transfers */ #define MMC_CAP_MMC_HIGHSPEED (1 << 1) /* Can do MMC high-speed timing */ @@ -241,7 +242,7 @@ struct mmc_host { #define MMC_CAP_CMD23 (1 << 30) /* CMD23 supported. */ #define MMC_CAP_HW_RESET (1 << 31) /* Hardware reset */ - unsigned int caps2; /* More host capabilities */ + u32 caps2; /* More host capabilities */ #define MMC_CAP2_BOOTPART_NOACC (1 << 0) /* Boot partition no access */ #define MMC_CAP2_CACHE_CTRL (1 << 1) /* Allow cache control */ diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 01e4b394029b..94d532e41c61 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -286,6 +286,7 @@ struct _mmc_csd { #define EXT_CSD_BKOPS_START 164 /* W */ #define EXT_CSD_SANITIZE_START 165 /* W */ #define EXT_CSD_WR_REL_PARAM 166 /* RO */ +#define EXT_CSD_RPMB_MULT 168 /* RO */ #define EXT_CSD_BOOT_WP 173 /* R/W */ #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */ #define EXT_CSD_PART_CONFIG 179 /* R/W */ @@ -339,6 +340,7 @@ struct _mmc_csd { #define EXT_CSD_PART_CONFIG_ACC_MASK (0x7) #define EXT_CSD_PART_CONFIG_ACC_BOOT0 (0x1) +#define EXT_CSD_PART_CONFIG_ACC_RPMB (0x3) #define EXT_CSD_PART_CONFIG_ACC_GP0 (0x4) #define EXT_CSD_PART_SUPPORT_PART_EN (0x1) diff --git a/include/linux/mmc/mxs-mmc.h b/include/linux/mmc/mxs-mmc.h deleted file mode 100644 index 7c2ad3a7f2f3..000000000000 --- a/include/linux/mmc/mxs-mmc.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __LINUX_MMC_MXS_MMC_H__ -#define __LINUX_MMC_MXS_MMC_H__ - -struct mxs_mmc_platform_data { - int wp_gpio; /* write protect pin */ - unsigned int flags; -#define SLOTF_4_BIT_CAPABLE (1 << 0) -#define SLOTF_8_BIT_CAPABLE (1 << 1) -}; - -#endif /* __LINUX_MMC_MXS_MMC_H__ */ diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h index fa8529a859b8..4bbc3301fbbf 100644 --- a/include/linux/mmc/sdhci.h +++ b/include/linux/mmc/sdhci.h @@ -91,6 +91,9 @@ struct sdhci_host { unsigned int quirks2; /* More deviations from spec. */ #define SDHCI_QUIRK2_HOST_OFF_CARD_ON (1<<0) +#define SDHCI_QUIRK2_HOST_NO_CMD23 (1<<1) +/* The system physically doesn't support 1.8v, even if the host does */ +#define SDHCI_QUIRK2_NO_1_8_V (1<<2) int irq; /* Device IRQ */ void __iomem *ioaddr; /* Mapped address */ @@ -157,8 +160,8 @@ struct sdhci_host { struct timer_list timer; /* Timer for timeouts */ - unsigned int caps; /* Alternative CAPABILITY_0 */ - unsigned int caps1; /* Alternative CAPABILITY_1 */ + u32 caps; /* Alternative CAPABILITY_0 */ + u32 caps1; /* Alternative CAPABILITY_1 */ unsigned int ocr_avail_sdio; /* OCR bit masks */ unsigned int ocr_avail_sd; diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 50aaca81f63d..4bec5be82cab 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -63,10 +63,8 @@ enum { #ifdef CONFIG_CMA # define is_migrate_cma(migratetype) unlikely((migratetype) == MIGRATE_CMA) -# define cma_wmark_pages(zone) zone->min_cma_pages #else # define is_migrate_cma(migratetype) false -# define cma_wmark_pages(zone) 0 #endif #define for_each_migratetype_order(order, type) \ @@ -383,13 +381,6 @@ struct zone { /* see spanned/present_pages for more description */ seqlock_t span_seqlock; #endif -#ifdef CONFIG_CMA - /* - * CMA needs to increase watermark levels during the allocation - * process to make sure that the system is not starved. - */ - unsigned long min_cma_pages; -#endif struct free_area free_area[MAX_ORDER]; #ifndef CONFIG_SPARSEMEM @@ -469,17 +460,44 @@ struct zone { unsigned long zone_start_pfn; /* - * zone_start_pfn, spanned_pages and present_pages are all - * protected by span_seqlock. It is a seqlock because it has - * to be read outside of zone->lock, and it is done in the main - * allocator path. But, it is written quite infrequently. + * spanned_pages is the total pages spanned by the zone, including + * holes, which is calculated as: + * spanned_pages = zone_end_pfn - zone_start_pfn; + * + * present_pages is physical pages existing within the zone, which + * is calculated as: + * present_pages = spanned_pages - absent_pages(pags in holes); + * + * managed_pages is present pages managed by the buddy system, which + * is calculated as (reserved_pages includes pages allocated by the + * bootmem allocator): + * managed_pages = present_pages - reserved_pages; + * + * So present_pages may be used by memory hotplug or memory power + * management logic to figure out unmanaged pages by checking + * (present_pages - managed_pages). And managed_pages should be used + * by page allocator and vm scanner to calculate all kinds of watermarks + * and thresholds. + * + * Locking rules: * - * The lock is declared along with zone->lock because it is + * zone_start_pfn and spanned_pages are protected by span_seqlock. + * It is a seqlock because it has to be read outside of zone->lock, + * and it is done in the main allocator path. But, it is written + * quite infrequently. + * + * The span_seq lock is declared along with zone->lock because it is * frequently read in proximity to zone->lock. It's good to * give them a chance of being in the same cacheline. + * + * Write access to present_pages and managed_pages at runtime should + * be protected by lock_memory_hotplug()/unlock_memory_hotplug(). + * Any reader who can't tolerant drift of present_pages and + * managed_pages should hold memory hotplug lock to get a stable value. */ - unsigned long spanned_pages; /* total size, including holes */ - unsigned long present_pages; /* amount of memory (excluding holes) */ + unsigned long spanned_pages; + unsigned long present_pages; + unsigned long managed_pages; /* * rarely used fields: @@ -717,6 +735,19 @@ typedef struct pglist_data { struct task_struct *kswapd; /* Protected by lock_memory_hotplug() */ int kswapd_max_order; enum zone_type classzone_idx; +#ifdef CONFIG_NUMA_BALANCING + /* + * Lock serializing the per destination node AutoNUMA memory + * migration rate limiting data. + */ + spinlock_t numabalancing_migrate_lock; + + /* Rate limiting time interval */ + unsigned long numabalancing_migrate_next_window; + + /* Number of pages migrated during the rate limiting time interval */ + unsigned long numabalancing_migrate_nr_pages; +#endif } pg_data_t; #define node_present_pages(nid) (NODE_DATA(nid)->node_present_pages) @@ -752,7 +783,7 @@ extern int init_currently_empty_zone(struct zone *zone, unsigned long start_pfn, unsigned long size, enum memmap_context context); -extern void lruvec_init(struct lruvec *lruvec, struct zone *zone); +extern void lruvec_init(struct lruvec *lruvec); static inline struct zone *lruvec_zone(struct lruvec *lruvec) { diff --git a/include/linux/mnt_namespace.h b/include/linux/mnt_namespace.h index 5a8e3903d770..12b2ab510323 100644 --- a/include/linux/mnt_namespace.h +++ b/include/linux/mnt_namespace.h @@ -4,9 +4,10 @@ struct mnt_namespace; struct fs_struct; +struct user_namespace; extern struct mnt_namespace *copy_mnt_ns(unsigned long, struct mnt_namespace *, - struct fs_struct *); + struct user_namespace *, struct fs_struct *); extern void put_mnt_ns(struct mnt_namespace *ns); extern const struct file_operations proc_mounts_operations; diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h index d6a58065c09c..137b4198fc03 100644 --- a/include/linux/moduleparam.h +++ b/include/linux/moduleparam.h @@ -16,17 +16,15 @@ /* Chosen so that structs with an unsigned long line up. */ #define MAX_PARAM_PREFIX_LEN (64 - sizeof(unsigned long)) -#define ___module_cat(a,b) __mod_ ## a ## b -#define __module_cat(a,b) ___module_cat(a,b) #ifdef MODULE #define __MODULE_INFO(tag, name, info) \ -static const char __module_cat(name,__LINE__)[] \ +static const char __UNIQUE_ID(name)[] \ __used __attribute__((section(".modinfo"), unused, aligned(1))) \ = __stringify(tag) "=" info #else /* !MODULE */ /* This struct is here for syntactic coherency, it is not used */ #define __MODULE_INFO(tag, name, info) \ - struct __module_cat(name,__LINE__) {} + struct __UNIQUE_ID(name) {} #endif #define __MODULE_PARM_TYPE(name, _type) \ __MODULE_INFO(parmtype, name##type, #name ":" _type) diff --git a/include/linux/mtd/blktrans.h b/include/linux/mtd/blktrans.h index ed270bd2e4df..4eb0a50d0c55 100644 --- a/include/linux/mtd/blktrans.h +++ b/include/linux/mtd/blktrans.h @@ -23,6 +23,7 @@ #include <linux/mutex.h> #include <linux/kref.h> #include <linux/sysfs.h> +#include <linux/workqueue.h> struct hd_geometry; struct mtd_info; @@ -43,7 +44,8 @@ struct mtd_blktrans_dev { struct kref ref; struct gendisk *disk; struct attribute_group *disk_attributes; - struct task_struct *thread; + struct workqueue_struct *wq; + struct work_struct work; struct request_queue *rq; spinlock_t queue_lock; void *priv; diff --git a/include/linux/mtd/doc2000.h b/include/linux/mtd/doc2000.h index 0f6fea73a1f6..407d1e556c39 100644 --- a/include/linux/mtd/doc2000.h +++ b/include/linux/mtd/doc2000.h @@ -92,12 +92,26 @@ * Others use readb/writeb */ #if defined(__arm__) -#define ReadDOC_(adr, reg) ((unsigned char)(*(volatile __u32 *)(((unsigned long)adr)+((reg)<<2)))) -#define WriteDOC_(d, adr, reg) do{ *(volatile __u32 *)(((unsigned long)adr)+((reg)<<2)) = (__u32)d; wmb();} while(0) +static inline u8 ReadDOC_(u32 __iomem *addr, unsigned long reg) +{ + return __raw_readl(addr + reg); +} +static inline void WriteDOC_(u8 data, u32 __iomem *addr, unsigned long reg) +{ + __raw_writel(data, addr + reg); + wmb(); +} #define DOC_IOREMAP_LEN 0x8000 #elif defined(__ppc__) -#define ReadDOC_(adr, reg) ((unsigned char)(*(volatile __u16 *)(((unsigned long)adr)+((reg)<<1)))) -#define WriteDOC_(d, adr, reg) do{ *(volatile __u16 *)(((unsigned long)adr)+((reg)<<1)) = (__u16)d; wmb();} while(0) +static inline u8 ReadDOC_(u16 __iomem *addr, unsigned long reg) +{ + return __raw_readw(addr + reg); +} +static inline void WriteDOC_(u8 data, u16 __iomem *addr, unsigned long reg) +{ + __raw_writew(data, addr + reg); + wmb(); +} #define DOC_IOREMAP_LEN 0x4000 #else #define ReadDOC_(adr, reg) readb((void __iomem *)(adr) + (reg)) diff --git a/include/linux/mtd/fsmc.h b/include/linux/mtd/fsmc.h index b20029221fb1..d6ed61ef451d 100644 --- a/include/linux/mtd/fsmc.h +++ b/include/linux/mtd/fsmc.h @@ -155,9 +155,6 @@ struct fsmc_nand_platform_data { unsigned int width; unsigned int bank; - /* CLE, ALE offsets */ - unsigned int cle_off; - unsigned int ale_off; enum access_mode mode; void (*select_bank)(uint32_t bank, uint32_t busw); diff --git a/include/linux/mtd/gpmi-nand.h b/include/linux/mtd/gpmi-nand.h deleted file mode 100644 index ed3c4e09f3d1..000000000000 --- a/include/linux/mtd/gpmi-nand.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#ifndef __MACH_MXS_GPMI_NAND_H__ -#define __MACH_MXS_GPMI_NAND_H__ - -/* The size of the resources is fixed. */ -#define GPMI_NAND_RES_SIZE 6 - -/* Resource names for the GPMI NAND driver. */ -#define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME "gpmi-nand" -#define GPMI_NAND_GPMI_INTERRUPT_RES_NAME "GPMI NAND GPMI Interrupt" -#define GPMI_NAND_BCH_REGS_ADDR_RES_NAME "bch" -#define GPMI_NAND_BCH_INTERRUPT_RES_NAME "bch" -#define GPMI_NAND_DMA_CHANNELS_RES_NAME "GPMI NAND DMA Channels" -#define GPMI_NAND_DMA_INTERRUPT_RES_NAME "gpmi-dma" - -/** - * struct gpmi_nand_platform_data - GPMI NAND driver platform data. - * - * This structure communicates platform-specific information to the GPMI NAND - * driver that can't be expressed as resources. - * - * @platform_init: A pointer to a function the driver will call to - * initialize the platform (e.g., set up the pin mux). - * @min_prop_delay_in_ns: Minimum propagation delay of GPMI signals to and - * from the NAND Flash device, in nanoseconds. - * @max_prop_delay_in_ns: Maximum propagation delay of GPMI signals to and - * from the NAND Flash device, in nanoseconds. - * @max_chip_count: The maximum number of chips for which the driver - * should configure the hardware. This value most - * likely reflects the number of pins that are - * connected to a NAND Flash device. If this is - * greater than the SoC hardware can support, the - * driver will print a message and fail to initialize. - * @partitions: An optional pointer to an array of partition - * descriptions. - * @partition_count: The number of elements in the partitions array. - */ -struct gpmi_nand_platform_data { - /* SoC hardware information. */ - int (*platform_init)(void); - - /* NAND Flash information. */ - unsigned int min_prop_delay_in_ns; - unsigned int max_prop_delay_in_ns; - unsigned int max_chip_count; - - /* Medium information. */ - struct mtd_partition *partitions; - unsigned partition_count; -}; -#endif diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h index 3595a0236b0f..f6eb4332ac92 100644 --- a/include/linux/mtd/map.h +++ b/include/linux/mtd/map.h @@ -328,7 +328,7 @@ static inline int map_word_bitsset(struct map_info *map, map_word val1, map_word static inline map_word map_word_load(struct map_info *map, const void *ptr) { - map_word r; + map_word r = {{0} }; if (map_bankwidth_is_1(map)) r.x[0] = *(unsigned char *)ptr; @@ -391,7 +391,7 @@ static inline map_word map_word_ff(struct map_info *map) static inline map_word inline_map_read(struct map_info *map, unsigned long ofs) { - map_word r; + map_word uninitialized_var(r); if (map_bankwidth_is_1(map)) r.x[0] = __raw_readb(map->virt + ofs); diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 81d61e704599..f9ac2897b86b 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -98,7 +98,7 @@ struct mtd_oob_ops { }; #define MTD_MAX_OOBFREE_ENTRIES_LARGE 32 -#define MTD_MAX_ECCPOS_ENTRIES_LARGE 448 +#define MTD_MAX_ECCPOS_ENTRIES_LARGE 640 /* * Internal ECC layout control structure. For historical reasons, there is a * similar, smaller struct nand_ecclayout_user (in mtd-abi.h) that is retained diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 24e915957e4f..7ccb3c59ed60 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -219,6 +219,13 @@ typedef enum { #define NAND_OWN_BUFFERS 0x00020000 /* Chip may not exist, so silence any errors in scan */ #define NAND_SCAN_SILENT_NODEV 0x00040000 +/* + * Autodetect nand buswidth with readid/onfi. + * This suppose the driver will configure the hardware in 8 bits mode + * when calling nand_scan_ident, and update its configuration + * before calling nand_scan_tail. + */ +#define NAND_BUSWIDTH_AUTO 0x00080000 /* Options set by nand scan */ /* Nand scan has allocated controller struct */ @@ -471,8 +478,8 @@ struct nand_buffers { * non 0 if ONFI supported. * @onfi_params: [INTERN] holds the ONFI page parameter when ONFI is * supported, 0 otherwise. - * @onfi_set_features [REPLACEABLE] set the features for ONFI nand - * @onfi_get_features [REPLACEABLE] get the features for ONFI nand + * @onfi_set_features: [REPLACEABLE] set the features for ONFI nand + * @onfi_get_features: [REPLACEABLE] get the features for ONFI nand * @ecclayout: [REPLACEABLE] the default ECC placement scheme * @bbt: [INTERN] bad block table pointer * @bbt_td: [REPLACEABLE] bad block table descriptor for flash diff --git a/include/linux/mtd/sh_flctl.h b/include/linux/mtd/sh_flctl.h index 01e4b15b280e..1c28f8879b1c 100644 --- a/include/linux/mtd/sh_flctl.h +++ b/include/linux/mtd/sh_flctl.h @@ -20,6 +20,7 @@ #ifndef __SH_FLCTL_H__ #define __SH_FLCTL_H__ +#include <linux/completion.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> @@ -107,6 +108,7 @@ #define ESTERINTE (0x1 << 24) /* ECC error interrupt enable */ #define AC1CLR (0x1 << 19) /* ECC FIFO clear */ #define AC0CLR (0x1 << 18) /* Data FIFO clear */ +#define DREQ0EN (0x1 << 16) /* FLDTFIFODMA Request Enable */ #define ECERB (0x1 << 9) /* ECC error */ #define STERB (0x1 << 8) /* Status error */ #define STERINTE (0x1 << 4) /* Status error enable */ @@ -138,6 +140,8 @@ enum flctl_ecc_res_t { FL_TIMEOUT }; +struct dma_chan; + struct sh_flctl { struct mtd_info mtd; struct nand_chip chip; @@ -147,7 +151,7 @@ struct sh_flctl { uint8_t done_buff[2048 + 64]; /* max size 2048 + 64 */ int read_bytes; - int index; + unsigned int index; int seqin_column; /* column in SEQIN cmd */ int seqin_page_addr; /* page_addr in SEQIN cmd */ uint32_t seqin_read_cmd; /* read cmd in SEQIN cmd */ @@ -161,6 +165,11 @@ struct sh_flctl { unsigned hwecc:1; /* Hardware ECC (0 = disabled, 1 = enabled) */ unsigned holden:1; /* Hardware has FLHOLDCR and HOLDEN is set */ unsigned qos_request:1; /* QoS request to prevent deep power shutdown */ + + /* DMA related objects */ + struct dma_chan *chan_fifo0_rx; + struct dma_chan *chan_fifo0_tx; + struct completion dma_complete; }; struct sh_flctl_platform_data { @@ -170,6 +179,9 @@ struct sh_flctl_platform_data { unsigned has_hwecc:1; unsigned use_holden:1; + + unsigned int slave_id_fifo0_tx; + unsigned int slave_id_fifo0_rx; }; static inline struct sh_flctl *mtd_to_flctl(struct mtd_info *mtdinfo) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index f8eda0276f03..02e0f6b156c3 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -369,7 +369,7 @@ typedef enum gro_result gro_result_t; * * If the rx_handler consider the skb should be ignored, it should return * RX_HANDLER_EXACT. The skb will only be delivered to protocol handlers that - * are registred on exact device (ptype->dev == skb->dev). + * are registered on exact device (ptype->dev == skb->dev). * * If the rx_handler didn't changed skb->dev, but want the skb to be normally * delivered, it should return RX_HANDLER_PASS. @@ -887,6 +887,10 @@ struct netdev_fcoe_hbainfo { * struct net_device *dev, int idx) * Used to add FDB entries to dump requests. Implementers should add * entries to skb and update idx with the number of entries. + * + * int (*ndo_bridge_setlink)(struct net_device *dev, struct nlmsghdr *nlh) + * int (*ndo_bridge_getlink)(struct sk_buff *skb, u32 pid, u32 seq, + * struct net_device *dev) */ struct net_device_ops { int (*ndo_init)(struct net_device *dev); @@ -998,6 +1002,12 @@ struct net_device_ops { struct netlink_callback *cb, struct net_device *dev, int idx); + + int (*ndo_bridge_setlink)(struct net_device *dev, + struct nlmsghdr *nlh); + int (*ndo_bridge_getlink)(struct sk_buff *skb, + u32 pid, u32 seq, + struct net_device *dev); }; /* @@ -1053,6 +1063,12 @@ struct net_device { netdev_features_t wanted_features; /* mask of features inheritable by VLAN devices */ netdev_features_t vlan_features; + /* mask of features inherited by encapsulating devices + * This field indicates what encapsulation offloads + * the hardware is capable of doing, and drivers will + * need to set them appropriately. + */ + netdev_features_t hw_enc_features; /* Interface index. Unique device identifier */ int ifindex; @@ -1488,6 +1504,9 @@ struct napi_gro_cb { /* Used in ipv6_gro_receive() */ int proto; + + /* used in skb_gro_receive() slow path */ + struct sk_buff *last; }; #define NAPI_GRO_CB(skb) ((struct napi_gro_cb *)(skb)->cb) @@ -1499,16 +1518,25 @@ struct packet_type { struct net_device *, struct packet_type *, struct net_device *); + bool (*id_match)(struct packet_type *ptype, + struct sock *sk); + void *af_packet_priv; + struct list_head list; +}; + +struct offload_callbacks { struct sk_buff *(*gso_segment)(struct sk_buff *skb, netdev_features_t features); int (*gso_send_check)(struct sk_buff *skb); struct sk_buff **(*gro_receive)(struct sk_buff **head, struct sk_buff *skb); int (*gro_complete)(struct sk_buff *skb); - bool (*id_match)(struct packet_type *ptype, - struct sock *sk); - void *af_packet_priv; - struct list_head list; +}; + +struct packet_offload { + __be16 type; /* This is really htons(ether_type). */ + struct offload_callbacks callbacks; + struct list_head list; }; #include <linux/notifier.h> @@ -1548,6 +1576,8 @@ extern int call_netdevice_notifiers(unsigned long val, struct net_device *dev); extern rwlock_t dev_base_lock; /* Device list lock */ +extern seqlock_t devnet_rename_seq; /* Device rename lock */ + #define for_each_netdev(net, d) \ list_for_each_entry(d, &(net)->dev_base_head, dev_list) @@ -1605,6 +1635,9 @@ extern struct net_device *__dev_getfirstbyhwtype(struct net *net, unsigned short extern void dev_add_pack(struct packet_type *pt); extern void dev_remove_pack(struct packet_type *pt); extern void __dev_remove_pack(struct packet_type *pt); +extern void dev_add_offload(struct packet_offload *po); +extern void dev_remove_offload(struct packet_offload *po); +extern void __dev_remove_offload(struct packet_offload *po); extern struct net_device *dev_get_by_flags_rcu(struct net *net, unsigned short flags, unsigned short mask); @@ -2129,16 +2162,10 @@ extern void dev_kfree_skb_any(struct sk_buff *skb); extern int netif_rx(struct sk_buff *skb); extern int netif_rx_ni(struct sk_buff *skb); extern int netif_receive_skb(struct sk_buff *skb); -extern gro_result_t dev_gro_receive(struct napi_struct *napi, - struct sk_buff *skb); -extern gro_result_t napi_skb_finish(gro_result_t ret, struct sk_buff *skb); extern gro_result_t napi_gro_receive(struct napi_struct *napi, struct sk_buff *skb); extern void napi_gro_flush(struct napi_struct *napi, bool flush_old); extern struct sk_buff * napi_get_frags(struct napi_struct *napi); -extern gro_result_t napi_frags_finish(struct napi_struct *napi, - struct sk_buff *skb, - gro_result_t ret); extern gro_result_t napi_gro_frags(struct napi_struct *napi); static inline void napi_free_frags(struct napi_struct *napi) diff --git a/include/linux/netfilter/Kbuild b/include/linux/netfilter/Kbuild deleted file mode 100644 index b3322023e9a5..000000000000 --- a/include/linux/netfilter/Kbuild +++ /dev/null @@ -1 +0,0 @@ -header-y += ipset/ diff --git a/include/linux/netfilter/ipset/Kbuild b/include/linux/netfilter/ipset/Kbuild deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/include/linux/netfilter/ipset/Kbuild +++ /dev/null diff --git a/include/linux/netfilter_arp/Kbuild b/include/linux/netfilter_arp/Kbuild deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/include/linux/netfilter_arp/Kbuild +++ /dev/null diff --git a/include/linux/netfilter_bridge/Kbuild b/include/linux/netfilter_bridge/Kbuild deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/include/linux/netfilter_bridge/Kbuild +++ /dev/null diff --git a/include/linux/netfilter_ipv4/Kbuild b/include/linux/netfilter_ipv4/Kbuild deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/include/linux/netfilter_ipv4/Kbuild +++ /dev/null diff --git a/include/linux/netfilter_ipv6/Kbuild b/include/linux/netfilter_ipv6/Kbuild deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/include/linux/netfilter_ipv6/Kbuild +++ /dev/null diff --git a/include/linux/netfilter_ipv6/ip6_tables.h b/include/linux/netfilter_ipv6/ip6_tables.h index 5f84c6229dc6..610208b18c05 100644 --- a/include/linux/netfilter_ipv6/ip6_tables.h +++ b/include/linux/netfilter_ipv6/ip6_tables.h @@ -47,15 +47,6 @@ ip6t_ext_hdr(u8 nexthdr) (nexthdr == IPPROTO_DSTOPTS); } -enum { - IP6T_FH_F_FRAG = (1 << 0), - IP6T_FH_F_AUTH = (1 << 1), -}; - -/* find specified header and get offset to it */ -extern int ipv6_find_hdr(const struct sk_buff *skb, unsigned int *offset, - int target, unsigned short *fragoff, int *fragflg); - #ifdef CONFIG_COMPAT #include <net/compat.h> diff --git a/include/linux/nfc/pn544.h b/include/linux/nfc/pn544.h deleted file mode 100644 index 9890bbaf4328..000000000000 --- a/include/linux/nfc/pn544.h +++ /dev/null @@ -1,104 +0,0 @@ -/* - * Driver include for the PN544 NFC chip. - * - * Copyright (C) Nokia Corporation - * - * Author: Jari Vanhala <ext-jari.vanhala@nokia.com> - * Contact: Matti Aaltoenn <matti.j.aaltonen@nokia.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _PN544_H_ -#define _PN544_H_ - -#include <linux/i2c.h> - -#define PN544_DRIVER_NAME "pn544" -#define PN544_MAXWINDOW_SIZE 7 -#define PN544_WINDOW_SIZE 4 -#define PN544_RETRIES 10 -#define PN544_MAX_I2C_TRANSFER 0x0400 -#define PN544_MSG_MAX_SIZE 0x21 /* at normal HCI mode */ - -/* ioctl */ -#define PN544_CHAR_BASE 'P' -#define PN544_IOR(num, dtype) _IOR(PN544_CHAR_BASE, num, dtype) -#define PN544_IOW(num, dtype) _IOW(PN544_CHAR_BASE, num, dtype) -#define PN544_GET_FW_MODE PN544_IOW(1, unsigned int) -#define PN544_SET_FW_MODE PN544_IOW(2, unsigned int) -#define PN544_GET_DEBUG PN544_IOW(3, unsigned int) -#define PN544_SET_DEBUG PN544_IOW(4, unsigned int) - -/* Timing restrictions (ms) */ -#define PN544_RESETVEN_TIME 30 /* 7 */ -#define PN544_PVDDVEN_TIME 0 -#define PN544_VBATVEN_TIME 0 -#define PN544_GPIO4VEN_TIME 0 -#define PN544_WAKEUP_ACK 5 -#define PN544_WAKEUP_GUARD (PN544_WAKEUP_ACK + 1) -#define PN544_INACTIVITY_TIME 1000 -#define PN544_INTERFRAME_DELAY 200 /* us */ -#define PN544_BAUDRATE_CHANGE 150 /* us */ - -/* Debug bits */ -#define PN544_DEBUG_BUF 0x01 -#define PN544_DEBUG_READ 0x02 -#define PN544_DEBUG_WRITE 0x04 -#define PN544_DEBUG_IRQ 0x08 -#define PN544_DEBUG_CALLS 0x10 -#define PN544_DEBUG_MODE 0x20 - -/* Normal (HCI) mode */ -#define PN544_LLC_HCI_OVERHEAD 3 /* header + crc (to length) */ -#define PN544_LLC_MIN_SIZE (1 + PN544_LLC_HCI_OVERHEAD) /* length + */ -#define PN544_LLC_MAX_DATA (PN544_MSG_MAX_SIZE - 2) -#define PN544_LLC_MAX_HCI_SIZE (PN544_LLC_MAX_DATA - 2) - -struct pn544_llc_packet { - unsigned char length; /* of rest of packet */ - unsigned char header; - unsigned char data[PN544_LLC_MAX_DATA]; /* includes crc-ccitt */ -}; - -/* Firmware upgrade mode */ -#define PN544_FW_HEADER_SIZE 3 -/* max fw transfer is 1024bytes, but I2C limits it to 0xC0 */ -#define PN544_MAX_FW_DATA (PN544_MAX_I2C_TRANSFER - PN544_FW_HEADER_SIZE) - -struct pn544_fw_packet { - unsigned char command; /* status in answer */ - unsigned char length[2]; /* big-endian order (msf) */ - unsigned char data[PN544_MAX_FW_DATA]; -}; - -#ifdef __KERNEL__ -enum { - NFC_GPIO_ENABLE, - NFC_GPIO_FW_RESET, - NFC_GPIO_IRQ -}; - -/* board config */ -struct pn544_nfc_platform_data { - int (*request_resources) (struct i2c_client *client); - void (*free_resources) (void); - void (*enable) (int fw); - int (*test) (void); - void (*disable) (void); - int (*get_gpio)(int type); -}; -#endif /* __KERNEL__ */ - -#endif /* _PN544_H_ */ diff --git a/include/linux/nfs_fs_sb.h b/include/linux/nfs_fs_sb.h index a9e76ee1adca..6c6ed153a9b4 100644 --- a/include/linux/nfs_fs_sb.h +++ b/include/linux/nfs_fs_sb.h @@ -198,51 +198,4 @@ struct nfs_server { #define NFS_CAP_POSIX_LOCK (1U << 14) #define NFS_CAP_UIDGID_NOMAP (1U << 15) - -/* maximum number of slots to use */ -#define NFS4_DEF_SLOT_TABLE_SIZE (16U) -#define NFS4_MAX_SLOT_TABLE (256U) -#define NFS4_NO_SLOT ((u32)-1) - -#if IS_ENABLED(CONFIG_NFS_V4) - -/* Sessions */ -#define SLOT_TABLE_SZ DIV_ROUND_UP(NFS4_MAX_SLOT_TABLE, 8*sizeof(long)) -struct nfs4_slot_table { - struct nfs4_slot *slots; /* seqid per slot */ - unsigned long used_slots[SLOT_TABLE_SZ]; /* used/unused bitmap */ - spinlock_t slot_tbl_lock; - struct rpc_wait_queue slot_tbl_waitq; /* allocators may wait here */ - u32 max_slots; /* # slots in table */ - u32 highest_used_slotid; /* sent to server on each SEQ. - * op for dynamic resizing */ - u32 target_max_slots; /* Set by CB_RECALL_SLOT as - * the new max_slots */ - struct completion complete; -}; - -static inline int slot_idx(struct nfs4_slot_table *tbl, struct nfs4_slot *sp) -{ - return sp - tbl->slots; -} - -/* - * Session related parameters - */ -struct nfs4_session { - struct nfs4_sessionid sess_id; - u32 flags; - unsigned long session_state; - u32 hash_alg; - u32 ssv_len; - - /* The fore and back channel */ - struct nfs4_channel_attrs fc_attrs; - struct nfs4_slot_table fc_slot_table; - struct nfs4_channel_attrs bc_attrs; - struct nfs4_slot_table bc_slot_table; - struct nfs_client *clp; -}; - -#endif /* CONFIG_NFS_V4 */ #endif diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index a73ea89789d1..29adb12c7ecf 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -185,23 +185,20 @@ struct nfs4_channel_attrs { u32 max_reqs; }; -/* nfs41 sessions slot seqid */ -struct nfs4_slot { - u32 seq_nr; -}; - +struct nfs4_slot; struct nfs4_sequence_args { - struct nfs4_session *sa_session; - u32 sa_slotid; - u8 sa_cache_this; + struct nfs4_slot *sa_slot; + u8 sa_cache_this : 1, + sa_privileged : 1; }; struct nfs4_sequence_res { - struct nfs4_session *sr_session; struct nfs4_slot *sr_slot; /* slot used to send request */ + unsigned long sr_timestamp; int sr_status; /* sequence operation status */ - unsigned long sr_renewal_time; u32 sr_status_flags; + u32 sr_highest_slotid; + u32 sr_target_highest_slotid; }; struct nfs4_get_lease_time_args { @@ -209,8 +206,8 @@ struct nfs4_get_lease_time_args { }; struct nfs4_get_lease_time_res { - struct nfs_fsinfo *lr_fsinfo; struct nfs4_sequence_res lr_seq_res; + struct nfs_fsinfo *lr_fsinfo; }; #define PNFS_LAYOUT_MAXSIZE 4096 @@ -228,23 +225,23 @@ struct pnfs_layout_range { }; struct nfs4_layoutget_args { + struct nfs4_sequence_args seq_args; __u32 type; struct pnfs_layout_range range; __u64 minlength; __u32 maxcount; struct inode *inode; struct nfs_open_context *ctx; - struct nfs4_sequence_args seq_args; nfs4_stateid stateid; struct nfs4_layoutdriver_data layout; }; struct nfs4_layoutget_res { + struct nfs4_sequence_res seq_res; __u32 return_on_close; struct pnfs_layout_range range; __u32 type; nfs4_stateid stateid; - struct nfs4_sequence_res seq_res; struct nfs4_layoutdriver_data *layoutp; }; @@ -255,38 +252,38 @@ struct nfs4_layoutget { }; struct nfs4_getdevicelist_args { + struct nfs4_sequence_args seq_args; const struct nfs_fh *fh; u32 layoutclass; - struct nfs4_sequence_args seq_args; }; struct nfs4_getdevicelist_res { - struct pnfs_devicelist *devlist; struct nfs4_sequence_res seq_res; + struct pnfs_devicelist *devlist; }; struct nfs4_getdeviceinfo_args { - struct pnfs_device *pdev; struct nfs4_sequence_args seq_args; + struct pnfs_device *pdev; }; struct nfs4_getdeviceinfo_res { - struct pnfs_device *pdev; struct nfs4_sequence_res seq_res; + struct pnfs_device *pdev; }; struct nfs4_layoutcommit_args { + struct nfs4_sequence_args seq_args; nfs4_stateid stateid; __u64 lastbytewritten; struct inode *inode; const u32 *bitmask; - struct nfs4_sequence_args seq_args; }; struct nfs4_layoutcommit_res { + struct nfs4_sequence_res seq_res; struct nfs_fattr *fattr; const struct nfs_server *server; - struct nfs4_sequence_res seq_res; int status; }; @@ -300,11 +297,11 @@ struct nfs4_layoutcommit_data { }; struct nfs4_layoutreturn_args { + struct nfs4_sequence_args seq_args; struct pnfs_layout_hdr *layout; struct inode *inode; nfs4_stateid stateid; __u32 layout_type; - struct nfs4_sequence_args seq_args; }; struct nfs4_layoutreturn_res { @@ -330,6 +327,7 @@ struct stateowner_id { * Arguments to the open call. */ struct nfs_openargs { + struct nfs4_sequence_args seq_args; const struct nfs_fh * fh; struct nfs_seqid * seqid; int open_flags; @@ -350,10 +348,10 @@ struct nfs_openargs { const u32 * bitmask; const u32 * open_bitmap; __u32 claim; - struct nfs4_sequence_args seq_args; }; struct nfs_openres { + struct nfs4_sequence_res seq_res; nfs4_stateid stateid; struct nfs_fh fh; struct nfs4_change_info cinfo; @@ -368,7 +366,6 @@ struct nfs_openres { __u32 attrset[NFS4_BITMAP_SIZE]; struct nfs4_string *owner; struct nfs4_string *group_owner; - struct nfs4_sequence_res seq_res; __u32 access_request; __u32 access_supported; __u32 access_result; @@ -392,20 +389,20 @@ struct nfs_open_confirmres { * Arguments to the close call. */ struct nfs_closeargs { + struct nfs4_sequence_args seq_args; struct nfs_fh * fh; nfs4_stateid * stateid; struct nfs_seqid * seqid; fmode_t fmode; const u32 * bitmask; - struct nfs4_sequence_args seq_args; }; struct nfs_closeres { + struct nfs4_sequence_res seq_res; nfs4_stateid stateid; struct nfs_fattr * fattr; struct nfs_seqid * seqid; const struct nfs_server *server; - struct nfs4_sequence_res seq_res; }; /* * * Arguments to the lock,lockt, and locku call. @@ -417,6 +414,7 @@ struct nfs_lowner { }; struct nfs_lock_args { + struct nfs4_sequence_args seq_args; struct nfs_fh * fh; struct file_lock * fl; struct nfs_seqid * lock_seqid; @@ -427,40 +425,39 @@ struct nfs_lock_args { unsigned char block : 1; unsigned char reclaim : 1; unsigned char new_lock_owner : 1; - struct nfs4_sequence_args seq_args; }; struct nfs_lock_res { + struct nfs4_sequence_res seq_res; nfs4_stateid stateid; struct nfs_seqid * lock_seqid; struct nfs_seqid * open_seqid; - struct nfs4_sequence_res seq_res; }; struct nfs_locku_args { + struct nfs4_sequence_args seq_args; struct nfs_fh * fh; struct file_lock * fl; struct nfs_seqid * seqid; nfs4_stateid * stateid; - struct nfs4_sequence_args seq_args; }; struct nfs_locku_res { + struct nfs4_sequence_res seq_res; nfs4_stateid stateid; struct nfs_seqid * seqid; - struct nfs4_sequence_res seq_res; }; struct nfs_lockt_args { + struct nfs4_sequence_args seq_args; struct nfs_fh * fh; struct file_lock * fl; struct nfs_lowner lock_owner; - struct nfs4_sequence_args seq_args; }; struct nfs_lockt_res { - struct file_lock * denied; /* LOCK, LOCKT failed */ struct nfs4_sequence_res seq_res; + struct file_lock * denied; /* LOCK, LOCKT failed */ }; struct nfs_release_lockowner_args { @@ -468,22 +465,23 @@ struct nfs_release_lockowner_args { }; struct nfs4_delegreturnargs { + struct nfs4_sequence_args seq_args; const struct nfs_fh *fhandle; const nfs4_stateid *stateid; const u32 * bitmask; - struct nfs4_sequence_args seq_args; }; struct nfs4_delegreturnres { + struct nfs4_sequence_res seq_res; struct nfs_fattr * fattr; const struct nfs_server *server; - struct nfs4_sequence_res seq_res; }; /* * Arguments to the read call. */ struct nfs_readargs { + struct nfs4_sequence_args seq_args; struct nfs_fh * fh; struct nfs_open_context *context; struct nfs_lock_context *lock_context; @@ -491,20 +489,20 @@ struct nfs_readargs { __u32 count; unsigned int pgbase; struct page ** pages; - struct nfs4_sequence_args seq_args; }; struct nfs_readres { + struct nfs4_sequence_res seq_res; struct nfs_fattr * fattr; __u32 count; int eof; - struct nfs4_sequence_res seq_res; }; /* * Arguments to the write call. */ struct nfs_writeargs { + struct nfs4_sequence_args seq_args; struct nfs_fh * fh; struct nfs_open_context *context; struct nfs_lock_context *lock_context; @@ -514,7 +512,6 @@ struct nfs_writeargs { unsigned int pgbase; struct page ** pages; const u32 * bitmask; - struct nfs4_sequence_args seq_args; }; struct nfs_write_verifier { @@ -527,65 +524,65 @@ struct nfs_writeverf { }; struct nfs_writeres { + struct nfs4_sequence_res seq_res; struct nfs_fattr * fattr; struct nfs_writeverf * verf; __u32 count; const struct nfs_server *server; - struct nfs4_sequence_res seq_res; }; /* * Arguments to the commit call. */ struct nfs_commitargs { + struct nfs4_sequence_args seq_args; struct nfs_fh *fh; __u64 offset; __u32 count; const u32 *bitmask; - struct nfs4_sequence_args seq_args; }; struct nfs_commitres { + struct nfs4_sequence_res seq_res; struct nfs_fattr *fattr; struct nfs_writeverf *verf; const struct nfs_server *server; - struct nfs4_sequence_res seq_res; }; /* * Common arguments to the unlink call */ struct nfs_removeargs { + struct nfs4_sequence_args seq_args; const struct nfs_fh *fh; struct qstr name; - struct nfs4_sequence_args seq_args; }; struct nfs_removeres { + struct nfs4_sequence_res seq_res; const struct nfs_server *server; struct nfs_fattr *dir_attr; struct nfs4_change_info cinfo; - struct nfs4_sequence_res seq_res; }; /* * Common arguments to the rename call */ struct nfs_renameargs { + struct nfs4_sequence_args seq_args; const struct nfs_fh *old_dir; const struct nfs_fh *new_dir; const struct qstr *old_name; const struct qstr *new_name; - struct nfs4_sequence_args seq_args; }; struct nfs_renameres { + struct nfs4_sequence_res seq_res; const struct nfs_server *server; struct nfs4_change_info old_cinfo; struct nfs_fattr *old_fattr; struct nfs4_change_info new_cinfo; struct nfs_fattr *new_fattr; - struct nfs4_sequence_res seq_res; }; /* @@ -626,20 +623,20 @@ struct nfs_createargs { }; struct nfs_setattrargs { + struct nfs4_sequence_args seq_args; struct nfs_fh * fh; nfs4_stateid stateid; struct iattr * iap; const struct nfs_server * server; /* Needed for name mapping */ const u32 * bitmask; - struct nfs4_sequence_args seq_args; }; struct nfs_setaclargs { + struct nfs4_sequence_args seq_args; struct nfs_fh * fh; size_t acl_len; unsigned int acl_pgbase; struct page ** acl_pages; - struct nfs4_sequence_args seq_args; }; struct nfs_setaclres { @@ -647,27 +644,27 @@ struct nfs_setaclres { }; struct nfs_getaclargs { + struct nfs4_sequence_args seq_args; struct nfs_fh * fh; size_t acl_len; unsigned int acl_pgbase; struct page ** acl_pages; - struct nfs4_sequence_args seq_args; }; /* getxattr ACL interface flags */ #define NFS4_ACL_TRUNC 0x0001 /* ACL was truncated */ struct nfs_getaclres { + struct nfs4_sequence_res seq_res; size_t acl_len; size_t acl_data_offset; int acl_flags; struct page * acl_scratch; - struct nfs4_sequence_res seq_res; }; struct nfs_setattrres { + struct nfs4_sequence_res seq_res; struct nfs_fattr * fattr; const struct nfs_server * server; - struct nfs4_sequence_res seq_res; }; struct nfs_linkargs { @@ -832,21 +829,22 @@ struct nfs3_getaclres { typedef u64 clientid4; struct nfs4_accessargs { + struct nfs4_sequence_args seq_args; const struct nfs_fh * fh; const u32 * bitmask; u32 access; - struct nfs4_sequence_args seq_args; }; struct nfs4_accessres { + struct nfs4_sequence_res seq_res; const struct nfs_server * server; struct nfs_fattr * fattr; u32 supported; u32 access; - struct nfs4_sequence_res seq_res; }; struct nfs4_create_arg { + struct nfs4_sequence_args seq_args; u32 ftype; union { struct { @@ -863,88 +861,88 @@ struct nfs4_create_arg { const struct iattr * attrs; const struct nfs_fh * dir_fh; const u32 * bitmask; - struct nfs4_sequence_args seq_args; }; struct nfs4_create_res { + struct nfs4_sequence_res seq_res; const struct nfs_server * server; struct nfs_fh * fh; struct nfs_fattr * fattr; struct nfs4_change_info dir_cinfo; - struct nfs4_sequence_res seq_res; }; struct nfs4_fsinfo_arg { + struct nfs4_sequence_args seq_args; const struct nfs_fh * fh; const u32 * bitmask; - struct nfs4_sequence_args seq_args; }; struct nfs4_fsinfo_res { - struct nfs_fsinfo *fsinfo; struct nfs4_sequence_res seq_res; + struct nfs_fsinfo *fsinfo; }; struct nfs4_getattr_arg { + struct nfs4_sequence_args seq_args; const struct nfs_fh * fh; const u32 * bitmask; - struct nfs4_sequence_args seq_args; }; struct nfs4_getattr_res { + struct nfs4_sequence_res seq_res; const struct nfs_server * server; struct nfs_fattr * fattr; - struct nfs4_sequence_res seq_res; }; struct nfs4_link_arg { + struct nfs4_sequence_args seq_args; const struct nfs_fh * fh; const struct nfs_fh * dir_fh; const struct qstr * name; const u32 * bitmask; - struct nfs4_sequence_args seq_args; }; struct nfs4_link_res { + struct nfs4_sequence_res seq_res; const struct nfs_server * server; struct nfs_fattr * fattr; struct nfs4_change_info cinfo; struct nfs_fattr * dir_attr; - struct nfs4_sequence_res seq_res; }; struct nfs4_lookup_arg { + struct nfs4_sequence_args seq_args; const struct nfs_fh * dir_fh; const struct qstr * name; const u32 * bitmask; - struct nfs4_sequence_args seq_args; }; struct nfs4_lookup_res { + struct nfs4_sequence_res seq_res; const struct nfs_server * server; struct nfs_fattr * fattr; struct nfs_fh * fh; - struct nfs4_sequence_res seq_res; }; struct nfs4_lookup_root_arg { - const u32 * bitmask; struct nfs4_sequence_args seq_args; + const u32 * bitmask; }; struct nfs4_pathconf_arg { + struct nfs4_sequence_args seq_args; const struct nfs_fh * fh; const u32 * bitmask; - struct nfs4_sequence_args seq_args; }; struct nfs4_pathconf_res { - struct nfs_pathconf *pathconf; struct nfs4_sequence_res seq_res; + struct nfs_pathconf *pathconf; }; struct nfs4_readdir_arg { + struct nfs4_sequence_args seq_args; const struct nfs_fh * fh; u64 cookie; nfs4_verifier verifier; @@ -953,21 +951,20 @@ struct nfs4_readdir_arg { unsigned int pgbase; /* zero-copy data */ const u32 * bitmask; int plus; - struct nfs4_sequence_args seq_args; }; struct nfs4_readdir_res { + struct nfs4_sequence_res seq_res; nfs4_verifier verifier; unsigned int pgbase; - struct nfs4_sequence_res seq_res; }; struct nfs4_readlink { + struct nfs4_sequence_args seq_args; const struct nfs_fh * fh; unsigned int pgbase; unsigned int pglen; /* zero-copy data */ struct page ** pages; /* zero-copy data */ - struct nfs4_sequence_args seq_args; }; struct nfs4_readlink_res { @@ -993,28 +990,28 @@ struct nfs4_setclientid_res { }; struct nfs4_statfs_arg { + struct nfs4_sequence_args seq_args; const struct nfs_fh * fh; const u32 * bitmask; - struct nfs4_sequence_args seq_args; }; struct nfs4_statfs_res { - struct nfs_fsstat *fsstat; struct nfs4_sequence_res seq_res; + struct nfs_fsstat *fsstat; }; struct nfs4_server_caps_arg { - struct nfs_fh *fhandle; struct nfs4_sequence_args seq_args; + struct nfs_fh *fhandle; }; struct nfs4_server_caps_res { + struct nfs4_sequence_res seq_res; u32 attr_bitmask[3]; u32 acl_bitmask; u32 has_links; u32 has_symlinks; u32 fh_expire_type; - struct nfs4_sequence_res seq_res; }; #define NFS4_PATHNAME_MAXCOMPONENTS 512 @@ -1040,16 +1037,16 @@ struct nfs4_fs_locations { }; struct nfs4_fs_locations_arg { + struct nfs4_sequence_args seq_args; const struct nfs_fh *dir_fh; const struct qstr *name; struct page *page; const u32 *bitmask; - struct nfs4_sequence_args seq_args; }; struct nfs4_fs_locations_res { - struct nfs4_fs_locations *fs_locations; struct nfs4_sequence_res seq_res; + struct nfs4_fs_locations *fs_locations; }; struct nfs4_secinfo_oid { @@ -1074,14 +1071,14 @@ struct nfs4_secinfo_flavors { }; struct nfs4_secinfo_arg { + struct nfs4_sequence_args seq_args; const struct nfs_fh *dir_fh; const struct qstr *name; - struct nfs4_sequence_args seq_args; }; struct nfs4_secinfo_res { - struct nfs4_secinfo_flavors *flavors; struct nfs4_sequence_res seq_res; + struct nfs4_secinfo_flavors *flavors; }; #endif /* CONFIG_NFS_V4 */ @@ -1161,9 +1158,9 @@ struct nfs41_create_session_res { }; struct nfs41_reclaim_complete_args { + struct nfs4_sequence_args seq_args; /* In the future extend to include curr_fh for use with migration */ unsigned char one_fs:1; - struct nfs4_sequence_args seq_args; }; struct nfs41_reclaim_complete_res { @@ -1173,28 +1170,28 @@ struct nfs41_reclaim_complete_res { #define SECINFO_STYLE_CURRENT_FH 0 #define SECINFO_STYLE_PARENT 1 struct nfs41_secinfo_no_name_args { - int style; struct nfs4_sequence_args seq_args; + int style; }; struct nfs41_test_stateid_args { - nfs4_stateid *stateid; struct nfs4_sequence_args seq_args; + nfs4_stateid *stateid; }; struct nfs41_test_stateid_res { - unsigned int status; struct nfs4_sequence_res seq_res; + unsigned int status; }; struct nfs41_free_stateid_args { - nfs4_stateid *stateid; struct nfs4_sequence_args seq_args; + nfs4_stateid *stateid; }; struct nfs41_free_stateid_res { - unsigned int status; struct nfs4_sequence_res seq_res; + unsigned int status; }; #else diff --git a/include/linux/nfsd/Kbuild b/include/linux/nfsd/Kbuild deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/include/linux/nfsd/Kbuild +++ /dev/null diff --git a/include/linux/node.h b/include/linux/node.h index 624e53cecc02..2115ad5d6f19 100644 --- a/include/linux/node.h +++ b/include/linux/node.h @@ -27,10 +27,9 @@ struct node { }; struct memory_block; -extern struct node node_devices[]; +extern struct node *node_devices[]; typedef void (*node_registration_func_t)(struct node *); -extern int register_node(struct node *, int, struct node *); extern void unregister_node(struct node *node); #ifdef CONFIG_NUMA extern int register_one_node(int nid); diff --git a/include/linux/nodemask.h b/include/linux/nodemask.h index 7afc36334d52..4e2cbfa640b7 100644 --- a/include/linux/nodemask.h +++ b/include/linux/nodemask.h @@ -380,6 +380,11 @@ enum node_states { #else N_HIGH_MEMORY = N_NORMAL_MEMORY, #endif +#ifdef CONFIG_MOVABLE_NODE + N_MEMORY, /* The node has memory(regular, high, movable) */ +#else + N_MEMORY = N_HIGH_MEMORY, +#endif N_CPU, /* The node has one or more cpus */ NR_NODE_STATES }; diff --git a/include/linux/nsproxy.h b/include/linux/nsproxy.h index cc37a55ad004..10e5947491c7 100644 --- a/include/linux/nsproxy.h +++ b/include/linux/nsproxy.h @@ -67,7 +67,7 @@ void exit_task_namespaces(struct task_struct *tsk); void switch_task_namespaces(struct task_struct *tsk, struct nsproxy *new); void free_nsproxy(struct nsproxy *ns); int unshare_nsproxy_namespaces(unsigned long, struct nsproxy **, - struct fs_struct *); + struct cred *, struct fs_struct *); int __init nsproxy_cache_init(void); static inline void put_nsproxy(struct nsproxy *ns) diff --git a/include/linux/of.h b/include/linux/of.h index 72843b72a2b2..5ebcc5c8e423 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -22,6 +22,7 @@ #include <linux/mod_devicetable.h> #include <linux/spinlock.h> #include <linux/topology.h> +#include <linux/notifier.h> #include <asm/byteorder.h> #include <asm/errno.h> @@ -46,7 +47,7 @@ struct device_node { const char *name; const char *type; phandle phandle; - char *full_name; + const char *full_name; struct property *properties; struct property *deadprops; /* removed properties */ @@ -60,7 +61,7 @@ struct device_node { unsigned long _flags; void *data; #if defined(CONFIG_SPARC) - char *path_component_name; + const char *path_component_name; unsigned int unique_id; struct of_irq_controller *irq_trans; #endif @@ -88,14 +89,14 @@ static inline void of_node_put(struct device_node *node) { } #ifdef CONFIG_OF /* Pointer for first entry in chain of all nodes. */ -extern struct device_node *allnodes; +extern struct device_node *of_allnodes; extern struct device_node *of_chosen; extern struct device_node *of_aliases; extern rwlock_t devtree_lock; static inline bool of_have_populated_dt(void) { - return allnodes != NULL; + return of_allnodes != NULL; } static inline bool of_node_is_root(const struct device_node *node) @@ -179,11 +180,22 @@ extern struct device_node *of_find_compatible_node(struct device_node *from, #define for_each_compatible_node(dn, type, compatible) \ for (dn = of_find_compatible_node(NULL, type, compatible); dn; \ dn = of_find_compatible_node(dn, type, compatible)) -extern struct device_node *of_find_matching_node(struct device_node *from, - const struct of_device_id *matches); +extern struct device_node *of_find_matching_node_and_match( + struct device_node *from, + const struct of_device_id *matches, + const struct of_device_id **match); +static inline struct device_node *of_find_matching_node( + struct device_node *from, + const struct of_device_id *matches) +{ + return of_find_matching_node_and_match(from, matches, NULL); +} #define for_each_matching_node(dn, matches) \ for (dn = of_find_matching_node(NULL, matches); dn; \ dn = of_find_matching_node(dn, matches)) +#define for_each_matching_node_and_match(dn, matches, match) \ + for (dn = of_find_matching_node_and_match(NULL, matches, match); \ + dn; dn = of_find_matching_node_and_match(dn, matches, match)) extern struct device_node *of_find_node_by_path(const char *path); extern struct device_node *of_find_node_by_phandle(phandle handle); extern struct device_node *of_get_parent(const struct device_node *node); @@ -223,6 +235,10 @@ extern struct device_node *of_find_node_with_property( extern struct property *of_find_property(const struct device_node *np, const char *name, int *lenp); +extern int of_property_read_u8_array(const struct device_node *np, + const char *propname, u8 *out_values, size_t sz); +extern int of_property_read_u16_array(const struct device_node *np, + const char *propname, u16 *out_values, size_t sz); extern int of_property_read_u32_array(const struct device_node *np, const char *propname, u32 *out_values, @@ -255,10 +271,10 @@ extern int of_n_size_cells(struct device_node *np); extern const struct of_device_id *of_match_node( const struct of_device_id *matches, const struct device_node *node); extern int of_modalias_node(struct device_node *node, char *modalias, int len); -extern struct device_node *of_parse_phandle(struct device_node *np, +extern struct device_node *of_parse_phandle(const struct device_node *np, const char *phandle_name, int index); -extern int of_parse_phandle_with_args(struct device_node *np, +extern int of_parse_phandle_with_args(const struct device_node *np, const char *list_name, const char *cells_name, int index, struct of_phandle_args *out_args); @@ -267,16 +283,28 @@ extern int of_alias_get_id(struct device_node *np, const char *stem); extern int of_machine_is_compatible(const char *compat); -extern int prom_add_property(struct device_node* np, struct property* prop); -extern int prom_remove_property(struct device_node *np, struct property *prop); -extern int prom_update_property(struct device_node *np, - struct property *newprop); +extern int of_add_property(struct device_node *np, struct property *prop); +extern int of_remove_property(struct device_node *np, struct property *prop); +extern int of_update_property(struct device_node *np, struct property *newprop); -#if defined(CONFIG_OF_DYNAMIC) /* For updating the device tree at runtime */ -extern void of_attach_node(struct device_node *); -extern void of_detach_node(struct device_node *); -#endif +#define OF_RECONFIG_ATTACH_NODE 0x0001 +#define OF_RECONFIG_DETACH_NODE 0x0002 +#define OF_RECONFIG_ADD_PROPERTY 0x0003 +#define OF_RECONFIG_REMOVE_PROPERTY 0x0004 +#define OF_RECONFIG_UPDATE_PROPERTY 0x0005 + +struct of_prop_reconfig { + struct device_node *dn; + struct property *prop; +}; + +extern int of_reconfig_notifier_register(struct notifier_block *); +extern int of_reconfig_notifier_unregister(struct notifier_block *); +extern int of_reconfig_notify(unsigned long, void *); + +extern int of_attach_node(struct device_node *); +extern int of_detach_node(struct device_node *); #define of_match_ptr(_ptr) (_ptr) @@ -331,6 +359,13 @@ static inline bool of_have_populated_dt(void) #define for_each_child_of_node(parent, child) \ while (0) +static inline struct device_node *of_get_child_by_name( + const struct device_node *node, + const char *name) +{ + return NULL; +} + static inline int of_get_child_count(const struct device_node *np) { return 0; @@ -357,6 +392,18 @@ static inline struct device_node *of_find_compatible_node( return NULL; } +static inline int of_property_read_u8_array(const struct device_node *np, + const char *propname, u8 *out_values, size_t sz) +{ + return -ENOSYS; +} + +static inline int of_property_read_u16_array(const struct device_node *np, + const char *propname, u16 *out_values, size_t sz) +{ + return -ENOSYS; +} + static inline int of_property_read_u32_array(const struct device_node *np, const char *propname, u32 *out_values, size_t sz) @@ -404,7 +451,7 @@ static inline int of_property_match_string(struct device_node *np, return -ENOSYS; } -static inline struct device_node *of_parse_phandle(struct device_node *np, +static inline struct device_node *of_parse_phandle(const struct device_node *np, const char *phandle_name, int index) { @@ -463,6 +510,20 @@ static inline bool of_property_read_bool(const struct device_node *np, return prop ? true : false; } +static inline int of_property_read_u8(const struct device_node *np, + const char *propname, + u8 *out_value) +{ + return of_property_read_u8_array(np, propname, out_value, 1); +} + +static inline int of_property_read_u16(const struct device_node *np, + const char *propname, + u16 *out_value) +{ + return of_property_read_u16_array(np, propname, out_value, 1); +} + static inline int of_property_read_u32(const struct device_node *np, const char *propname, u32 *out_value) diff --git a/include/linux/of_address.h b/include/linux/of_address.h index c3cdc1025c30..0506eb53519b 100644 --- a/include/linux/of_address.h +++ b/include/linux/of_address.h @@ -19,7 +19,7 @@ extern void __iomem *of_iomap(struct device_node *device, int index); * the address space flags too. The PCI version uses a BAR number * instead of an absolute index */ -extern const u32 *of_get_address(struct device_node *dev, int index, +extern const __be32 *of_get_address(struct device_node *dev, int index, u64 *size, unsigned int *flags); #ifndef pci_address_to_pio @@ -28,11 +28,13 @@ static inline unsigned long pci_address_to_pio(phys_addr_t addr) { return -1; } #endif #else /* CONFIG_OF_ADDRESS */ +#ifndef of_address_to_resource static inline int of_address_to_resource(struct device_node *dev, int index, struct resource *r) { return -EINVAL; } +#endif static inline struct device_node *of_find_matching_node_by_address( struct device_node *from, const struct of_device_id *matches, @@ -40,11 +42,13 @@ static inline struct device_node *of_find_matching_node_by_address( { return NULL; } +#ifndef of_iomap static inline void __iomem *of_iomap(struct device_node *device, int index) { return NULL; } -static inline const u32 *of_get_address(struct device_node *dev, int index, +#endif +static inline const __be32 *of_get_address(struct device_node *dev, int index, u64 *size, unsigned int *flags) { return NULL; diff --git a/include/linux/of_i2c.h b/include/linux/of_i2c.h index 1cb775f8e663..cfb545cd86b5 100644 --- a/include/linux/of_i2c.h +++ b/include/linux/of_i2c.h @@ -29,6 +29,18 @@ static inline void of_i2c_register_devices(struct i2c_adapter *adap) { return; } + +static inline struct i2c_client *of_find_i2c_device_by_node(struct device_node *node) +{ + return NULL; +} + +/* must call put_device() when done with returned i2c_adapter device */ +static inline struct i2c_adapter *of_find_i2c_adapter_by_node( + struct device_node *node) +{ + return NULL; +} #endif /* CONFIG_OF_I2C */ #endif /* __LINUX_OF_I2C_H */ diff --git a/include/linux/of_irq.h b/include/linux/of_irq.h index b8e241125201..535cecf1e02f 100644 --- a/include/linux/of_irq.h +++ b/include/linux/of_irq.h @@ -58,8 +58,8 @@ static inline int of_irq_map_oldworld(struct device_node *device, int index, #endif /* CONFIG_PPC32 && CONFIG_PPC_PMAC */ -extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec, - u32 ointsize, const u32 *addr, +extern int of_irq_map_raw(struct device_node *parent, const __be32 *intspec, + u32 ointsize, const __be32 *addr, struct of_irq *out_irq); extern int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq); diff --git a/include/linux/of_platform.h b/include/linux/of_platform.h index b47d2040c9f2..3863a4dbdf18 100644 --- a/include/linux/of_platform.h +++ b/include/linux/of_platform.h @@ -100,6 +100,7 @@ extern int of_platform_populate(struct device_node *root, #if !defined(CONFIG_OF_ADDRESS) struct of_dev_auxdata; +struct device; static inline int of_platform_populate(struct device_node *root, const struct of_device_id *matches, const struct of_dev_auxdata *lookup, diff --git a/include/linux/omap-dma.h b/include/linux/omap-dma.h index eb475a8ea25b..7af25a9c9c51 100644 --- a/include/linux/omap-dma.h +++ b/include/linux/omap-dma.h @@ -19,4 +19,370 @@ static inline bool omap_dma_filter_fn(struct dma_chan *c, void *d) } #endif +/* + * Legacy OMAP DMA handling defines and functions + * + * NOTE: Do not use these any longer. + * + * Use the generic dmaengine functions as defined in + * include/linux/dmaengine.h. + * + * Copyright (C) 2003 Nokia Corporation + * Author: Juha Yrjölä <juha.yrjola@nokia.com> + * + */ + +#include <linux/platform_device.h> + +#define INT_DMA_LCD 25 + +#define OMAP1_DMA_TOUT_IRQ (1 << 0) +#define OMAP_DMA_DROP_IRQ (1 << 1) +#define OMAP_DMA_HALF_IRQ (1 << 2) +#define OMAP_DMA_FRAME_IRQ (1 << 3) +#define OMAP_DMA_LAST_IRQ (1 << 4) +#define OMAP_DMA_BLOCK_IRQ (1 << 5) +#define OMAP1_DMA_SYNC_IRQ (1 << 6) +#define OMAP2_DMA_PKT_IRQ (1 << 7) +#define OMAP2_DMA_TRANS_ERR_IRQ (1 << 8) +#define OMAP2_DMA_SECURE_ERR_IRQ (1 << 9) +#define OMAP2_DMA_SUPERVISOR_ERR_IRQ (1 << 10) +#define OMAP2_DMA_MISALIGNED_ERR_IRQ (1 << 11) + +#define OMAP_DMA_CCR_EN (1 << 7) +#define OMAP_DMA_CCR_RD_ACTIVE (1 << 9) +#define OMAP_DMA_CCR_WR_ACTIVE (1 << 10) +#define OMAP_DMA_CCR_SEL_SRC_DST_SYNC (1 << 24) +#define OMAP_DMA_CCR_BUFFERING_DISABLE (1 << 25) + +#define OMAP_DMA_DATA_TYPE_S8 0x00 +#define OMAP_DMA_DATA_TYPE_S16 0x01 +#define OMAP_DMA_DATA_TYPE_S32 0x02 + +#define OMAP_DMA_SYNC_ELEMENT 0x00 +#define OMAP_DMA_SYNC_FRAME 0x01 +#define OMAP_DMA_SYNC_BLOCK 0x02 +#define OMAP_DMA_SYNC_PACKET 0x03 + +#define OMAP_DMA_DST_SYNC_PREFETCH 0x02 +#define OMAP_DMA_SRC_SYNC 0x01 +#define OMAP_DMA_DST_SYNC 0x00 + +#define OMAP_DMA_PORT_EMIFF 0x00 +#define OMAP_DMA_PORT_EMIFS 0x01 +#define OMAP_DMA_PORT_OCP_T1 0x02 +#define OMAP_DMA_PORT_TIPB 0x03 +#define OMAP_DMA_PORT_OCP_T2 0x04 +#define OMAP_DMA_PORT_MPUI 0x05 + +#define OMAP_DMA_AMODE_CONSTANT 0x00 +#define OMAP_DMA_AMODE_POST_INC 0x01 +#define OMAP_DMA_AMODE_SINGLE_IDX 0x02 +#define OMAP_DMA_AMODE_DOUBLE_IDX 0x03 + +#define DMA_DEFAULT_FIFO_DEPTH 0x10 +#define DMA_DEFAULT_ARB_RATE 0x01 +/* Pass THREAD_RESERVE ORed with THREAD_FIFO for tparams */ +#define DMA_THREAD_RESERVE_NORM (0x00 << 12) /* Def */ +#define DMA_THREAD_RESERVE_ONET (0x01 << 12) +#define DMA_THREAD_RESERVE_TWOT (0x02 << 12) +#define DMA_THREAD_RESERVE_THREET (0x03 << 12) +#define DMA_THREAD_FIFO_NONE (0x00 << 14) /* Def */ +#define DMA_THREAD_FIFO_75 (0x01 << 14) +#define DMA_THREAD_FIFO_25 (0x02 << 14) +#define DMA_THREAD_FIFO_50 (0x03 << 14) + +/* DMA4_OCP_SYSCONFIG bits */ +#define DMA_SYSCONFIG_MIDLEMODE_MASK (3 << 12) +#define DMA_SYSCONFIG_CLOCKACTIVITY_MASK (3 << 8) +#define DMA_SYSCONFIG_EMUFREE (1 << 5) +#define DMA_SYSCONFIG_SIDLEMODE_MASK (3 << 3) +#define DMA_SYSCONFIG_SOFTRESET (1 << 2) +#define DMA_SYSCONFIG_AUTOIDLE (1 << 0) + +#define DMA_SYSCONFIG_MIDLEMODE(n) ((n) << 12) +#define DMA_SYSCONFIG_SIDLEMODE(n) ((n) << 3) + +#define DMA_IDLEMODE_SMARTIDLE 0x2 +#define DMA_IDLEMODE_NO_IDLE 0x1 +#define DMA_IDLEMODE_FORCE_IDLE 0x0 + +/* Chaining modes*/ +#ifndef CONFIG_ARCH_OMAP1 +#define OMAP_DMA_STATIC_CHAIN 0x1 +#define OMAP_DMA_DYNAMIC_CHAIN 0x2 +#define OMAP_DMA_CHAIN_ACTIVE 0x1 +#define OMAP_DMA_CHAIN_INACTIVE 0x0 +#endif + +#define DMA_CH_PRIO_HIGH 0x1 +#define DMA_CH_PRIO_LOW 0x0 /* Def */ + +/* Errata handling */ +#define IS_DMA_ERRATA(id) (errata & (id)) +#define SET_DMA_ERRATA(id) (errata |= (id)) + +#define DMA_ERRATA_IFRAME_BUFFERING BIT(0x0) +#define DMA_ERRATA_PARALLEL_CHANNELS BIT(0x1) +#define DMA_ERRATA_i378 BIT(0x2) +#define DMA_ERRATA_i541 BIT(0x3) +#define DMA_ERRATA_i88 BIT(0x4) +#define DMA_ERRATA_3_3 BIT(0x5) +#define DMA_ROMCODE_BUG BIT(0x6) + +/* Attributes for OMAP DMA Contrller */ +#define DMA_LINKED_LCH BIT(0x0) +#define GLOBAL_PRIORITY BIT(0x1) +#define RESERVE_CHANNEL BIT(0x2) +#define IS_CSSA_32 BIT(0x3) +#define IS_CDSA_32 BIT(0x4) +#define IS_RW_PRIORITY BIT(0x5) +#define ENABLE_1510_MODE BIT(0x6) +#define SRC_PORT BIT(0x7) +#define DST_PORT BIT(0x8) +#define SRC_INDEX BIT(0x9) +#define DST_INDEX BIT(0xa) +#define IS_BURST_ONLY4 BIT(0xb) +#define CLEAR_CSR_ON_READ BIT(0xc) +#define IS_WORD_16 BIT(0xd) +#define ENABLE_16XX_MODE BIT(0xe) +#define HS_CHANNELS_RESERVED BIT(0xf) + +/* Defines for DMA Capabilities */ +#define DMA_HAS_TRANSPARENT_CAPS (0x1 << 18) +#define DMA_HAS_CONSTANT_FILL_CAPS (0x1 << 19) +#define DMA_HAS_DESCRIPTOR_CAPS (0x3 << 20) + +enum omap_reg_offsets { + +GCR, GSCR, GRST1, HW_ID, +PCH2_ID, PCH0_ID, PCH1_ID, PCHG_ID, +PCHD_ID, CAPS_0, CAPS_1, CAPS_2, +CAPS_3, CAPS_4, PCH2_SR, PCH0_SR, +PCH1_SR, PCHD_SR, REVISION, IRQSTATUS_L0, +IRQSTATUS_L1, IRQSTATUS_L2, IRQSTATUS_L3, IRQENABLE_L0, +IRQENABLE_L1, IRQENABLE_L2, IRQENABLE_L3, SYSSTATUS, +OCP_SYSCONFIG, + +/* omap1+ specific */ +CPC, CCR2, LCH_CTRL, + +/* Common registers for all omap's */ +CSDP, CCR, CICR, CSR, +CEN, CFN, CSFI, CSEI, +CSAC, CDAC, CDEI, +CDFI, CLNK_CTRL, + +/* Channel specific registers */ +CSSA, CDSA, COLOR, +CCEN, CCFN, + +/* omap3630 and omap4 specific */ +CDP, CNDP, CCDN, + +}; + +enum omap_dma_burst_mode { + OMAP_DMA_DATA_BURST_DIS = 0, + OMAP_DMA_DATA_BURST_4, + OMAP_DMA_DATA_BURST_8, + OMAP_DMA_DATA_BURST_16, +}; + +enum end_type { + OMAP_DMA_LITTLE_ENDIAN = 0, + OMAP_DMA_BIG_ENDIAN +}; + +enum omap_dma_color_mode { + OMAP_DMA_COLOR_DIS = 0, + OMAP_DMA_CONSTANT_FILL, + OMAP_DMA_TRANSPARENT_COPY +}; + +enum omap_dma_write_mode { + OMAP_DMA_WRITE_NON_POSTED = 0, + OMAP_DMA_WRITE_POSTED, + OMAP_DMA_WRITE_LAST_NON_POSTED +}; + +enum omap_dma_channel_mode { + OMAP_DMA_LCH_2D = 0, + OMAP_DMA_LCH_G, + OMAP_DMA_LCH_P, + OMAP_DMA_LCH_PD +}; + +struct omap_dma_channel_params { + int data_type; /* data type 8,16,32 */ + int elem_count; /* number of elements in a frame */ + int frame_count; /* number of frames in a element */ + + int src_port; /* Only on OMAP1 REVISIT: Is this needed? */ + int src_amode; /* constant, post increment, indexed, + double indexed */ + unsigned long src_start; /* source address : physical */ + int src_ei; /* source element index */ + int src_fi; /* source frame index */ + + int dst_port; /* Only on OMAP1 REVISIT: Is this needed? */ + int dst_amode; /* constant, post increment, indexed, + double indexed */ + unsigned long dst_start; /* source address : physical */ + int dst_ei; /* source element index */ + int dst_fi; /* source frame index */ + + int trigger; /* trigger attached if the channel is + synchronized */ + int sync_mode; /* sycn on element, frame , block or packet */ + int src_or_dst_synch; /* source synch(1) or destination synch(0) */ + + int ie; /* interrupt enabled */ + + unsigned char read_prio;/* read priority */ + unsigned char write_prio;/* write priority */ + +#ifndef CONFIG_ARCH_OMAP1 + enum omap_dma_burst_mode burst_mode; /* Burst mode 4/8/16 words */ +#endif +}; + +struct omap_dma_lch { + int next_lch; + int dev_id; + u16 saved_csr; + u16 enabled_irqs; + const char *dev_name; + void (*callback)(int lch, u16 ch_status, void *data); + void *data; + long flags; + /* required for Dynamic chaining */ + int prev_linked_ch; + int next_linked_ch; + int state; + int chain_id; + int status; +}; + +struct omap_dma_dev_attr { + u32 dev_caps; + u16 lch_count; + u16 chan_count; + struct omap_dma_lch *chan; +}; + +/* System DMA platform data structure */ +struct omap_system_dma_plat_info { + struct omap_dma_dev_attr *dma_attr; + u32 errata; + void (*disable_irq_lch)(int lch); + void (*show_dma_caps)(void); + void (*clear_lch_regs)(int lch); + void (*clear_dma)(int lch); + void (*dma_write)(u32 val, int reg, int lch); + u32 (*dma_read)(int reg, int lch); +}; + +#ifdef CONFIG_ARCH_OMAP2PLUS +#define dma_omap2plus() 1 +#else +#define dma_omap2plus() 0 #endif +#define dma_omap1() (!dma_omap2plus()) +#define dma_omap15xx() ((dma_omap1() && (d->dev_caps & ENABLE_1510_MODE))) +#define dma_omap16xx() ((dma_omap1() && (d->dev_caps & ENABLE_16XX_MODE))) + +extern void omap_set_dma_priority(int lch, int dst_port, int priority); +extern int omap_request_dma(int dev_id, const char *dev_name, + void (*callback)(int lch, u16 ch_status, void *data), + void *data, int *dma_ch); +extern void omap_enable_dma_irq(int ch, u16 irq_bits); +extern void omap_disable_dma_irq(int ch, u16 irq_bits); +extern void omap_free_dma(int ch); +extern void omap_start_dma(int lch); +extern void omap_stop_dma(int lch); +extern void omap_set_dma_transfer_params(int lch, int data_type, + int elem_count, int frame_count, + int sync_mode, + int dma_trigger, int src_or_dst_synch); +extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, + u32 color); +extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode); +extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode); + +extern void omap_set_dma_src_params(int lch, int src_port, int src_amode, + unsigned long src_start, + int src_ei, int src_fi); +extern void omap_set_dma_src_index(int lch, int eidx, int fidx); +extern void omap_set_dma_src_data_pack(int lch, int enable); +extern void omap_set_dma_src_burst_mode(int lch, + enum omap_dma_burst_mode burst_mode); + +extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, + unsigned long dest_start, + int dst_ei, int dst_fi); +extern void omap_set_dma_dest_index(int lch, int eidx, int fidx); +extern void omap_set_dma_dest_data_pack(int lch, int enable); +extern void omap_set_dma_dest_burst_mode(int lch, + enum omap_dma_burst_mode burst_mode); + +extern void omap_set_dma_params(int lch, + struct omap_dma_channel_params *params); + +extern void omap_dma_link_lch(int lch_head, int lch_queue); +extern void omap_dma_unlink_lch(int lch_head, int lch_queue); + +extern int omap_set_dma_callback(int lch, + void (*callback)(int lch, u16 ch_status, void *data), + void *data); +extern dma_addr_t omap_get_dma_src_pos(int lch); +extern dma_addr_t omap_get_dma_dst_pos(int lch); +extern void omap_clear_dma(int lch); +extern int omap_get_dma_active_status(int lch); +extern int omap_dma_running(void); +extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth, + int tparams); +extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio, + unsigned char write_prio); +extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype); +extern void omap_set_dma_src_endian_type(int lch, enum end_type etype); +extern int omap_get_dma_index(int lch, int *ei, int *fi); + +void omap_dma_global_context_save(void); +void omap_dma_global_context_restore(void); + +extern void omap_dma_disable_irq(int lch); + +/* Chaining APIs */ +#ifndef CONFIG_ARCH_OMAP1 +extern int omap_request_dma_chain(int dev_id, const char *dev_name, + void (*callback) (int lch, u16 ch_status, + void *data), + int *chain_id, int no_of_chans, + int chain_mode, + struct omap_dma_channel_params params); +extern int omap_free_dma_chain(int chain_id); +extern int omap_dma_chain_a_transfer(int chain_id, int src_start, + int dest_start, int elem_count, + int frame_count, void *callbk_data); +extern int omap_start_dma_chain_transfers(int chain_id); +extern int omap_stop_dma_chain_transfers(int chain_id); +extern int omap_get_dma_chain_index(int chain_id, int *ei, int *fi); +extern int omap_get_dma_chain_dst_pos(int chain_id); +extern int omap_get_dma_chain_src_pos(int chain_id); + +extern int omap_modify_dma_chain_params(int chain_id, + struct omap_dma_channel_params params); +extern int omap_dma_chain_status(int chain_id); +#endif + +#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_FB_OMAP) +#include <mach/lcd_dma.h> +#else +static inline int omap_lcd_dma_running(void) +{ + return 0; +} +#endif + +#endif /* __LINUX_OMAP_DMA_H */ diff --git a/include/linux/omap-iommu.h b/include/linux/omap-iommu.h new file mode 100644 index 000000000000..cac78de09c07 --- /dev/null +++ b/include/linux/omap-iommu.h @@ -0,0 +1,52 @@ +/* + * omap iommu: simple virtual address space management + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _INTEL_IOMMU_H_ +#define _INTEL_IOMMU_H_ + +struct iovm_struct { + struct omap_iommu *iommu; /* iommu object which this belongs to */ + u32 da_start; /* area definition */ + u32 da_end; + u32 flags; /* IOVMF_: see below */ + struct list_head list; /* linked in ascending order */ + const struct sg_table *sgt; /* keep 'page' <-> 'da' mapping */ + void *va; /* mpu side mapped address */ +}; + +#define MMU_RAM_ENDIAN_SHIFT 9 +#define MMU_RAM_ENDIAN_LITTLE (0 << MMU_RAM_ENDIAN_SHIFT) +#define MMU_RAM_ELSZ_8 (0 << MMU_RAM_ELSZ_SHIFT) +#define IOVMF_ENDIAN_LITTLE MMU_RAM_ENDIAN_LITTLE +#define MMU_RAM_ELSZ_SHIFT 7 +#define IOVMF_ELSZ_8 MMU_RAM_ELSZ_8 + +struct iommu_domain; + +extern struct iovm_struct *omap_find_iovm_area(struct device *dev, u32 da); +extern u32 +omap_iommu_vmap(struct iommu_domain *domain, struct device *dev, u32 da, + const struct sg_table *sgt, u32 flags); +extern struct sg_table *omap_iommu_vunmap(struct iommu_domain *domain, + struct device *dev, u32 da); +extern u32 +omap_iommu_vmalloc(struct iommu_domain *domain, struct device *dev, + u32 da, size_t bytes, u32 flags); +extern void +omap_iommu_vfree(struct iommu_domain *domain, struct device *dev, + const u32 da); +extern void *omap_da_to_va(struct device *dev, u32 da); + +extern void omap_iommu_save_ctx(struct device *dev); +extern void omap_iommu_restore_ctx(struct device *dev); + +#endif diff --git a/include/linux/oom.h b/include/linux/oom.h index fb9826847b89..da60007075b5 100644 --- a/include/linux/oom.h +++ b/include/linux/oom.h @@ -29,8 +29,23 @@ enum oom_scan_t { OOM_SCAN_SELECT, /* always select this thread first */ }; -extern void compare_swap_oom_score_adj(int old_val, int new_val); -extern int test_set_oom_score_adj(int new_val); +/* Thread is the potential origin of an oom condition; kill first on oom */ +#define OOM_FLAG_ORIGIN ((__force oom_flags_t)0x1) + +static inline void set_current_oom_origin(void) +{ + current->signal->oom_flags |= OOM_FLAG_ORIGIN; +} + +static inline void clear_current_oom_origin(void) +{ + current->signal->oom_flags &= ~OOM_FLAG_ORIGIN; +} + +static inline bool oom_task_origin(const struct task_struct *p) +{ + return !!(p->signal->oom_flags & OOM_FLAG_ORIGIN); +} extern unsigned long oom_badness(struct task_struct *p, struct mem_cgroup *memcg, const nodemask_t *nodemask, @@ -49,8 +64,6 @@ extern void check_panic_on_oom(enum oom_constraint constraint, gfp_t gfp_mask, extern enum oom_scan_t oom_scan_process_thread(struct task_struct *task, unsigned long totalpages, const nodemask_t *nodemask, bool force_kill); -extern void mem_cgroup_out_of_memory(struct mem_cgroup *memcg, gfp_t gfp_mask, - int order); extern void out_of_memory(struct zonelist *zonelist, gfp_t gfp_mask, int order, nodemask_t *mask, bool force_kill); diff --git a/include/linux/openvswitch.h b/include/linux/openvswitch.h index eb1efa54fe84..d42e174bd0c8 100644 --- a/include/linux/openvswitch.h +++ b/include/linux/openvswitch.h @@ -243,6 +243,7 @@ enum ovs_key_attr { OVS_KEY_ATTR_ICMPV6, /* struct ovs_key_icmpv6 */ OVS_KEY_ATTR_ARP, /* struct ovs_key_arp */ OVS_KEY_ATTR_ND, /* struct ovs_key_nd */ + OVS_KEY_ATTR_SKB_MARK, /* u32 skb mark */ __OVS_KEY_ATTR_MAX }; diff --git a/include/linux/page-isolation.h b/include/linux/page-isolation.h index 76a9539cfd3f..a92061e08d48 100644 --- a/include/linux/page-isolation.h +++ b/include/linux/page-isolation.h @@ -2,7 +2,8 @@ #define __LINUX_PAGEISOLATION_H -bool has_unmovable_pages(struct zone *zone, struct page *page, int count); +bool has_unmovable_pages(struct zone *zone, struct page *page, int count, + bool skip_hwpoisoned_pages); void set_pageblock_migratetype(struct page *page, int migratetype); int move_freepages_block(struct zone *zone, struct page *page, int migratetype); @@ -21,7 +22,7 @@ int move_freepages(struct zone *zone, */ int start_isolate_page_range(unsigned long start_pfn, unsigned long end_pfn, - unsigned migratetype); + unsigned migratetype, bool skip_hwpoisoned_pages); /* * Changes MIGRATE_ISOLATE to MIGRATE_MOVABLE. @@ -34,12 +35,13 @@ undo_isolate_page_range(unsigned long start_pfn, unsigned long end_pfn, /* * Test all pages in [start_pfn, end_pfn) are isolated or not. */ -int test_pages_isolated(unsigned long start_pfn, unsigned long end_pfn); +int test_pages_isolated(unsigned long start_pfn, unsigned long end_pfn, + bool skip_hwpoisoned_pages); /* * Internal functions. Changes pageblock's migrate type. */ -int set_migratetype_isolate(struct page *page); +int set_migratetype_isolate(struct page *page, bool skip_hwpoisoned_pages); void unset_migratetype_isolate(struct page *page, unsigned migratetype); struct page *alloc_migrate_target(struct page *page, unsigned long private, int **resultp); diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h index e42c762f0dc7..6da609d14c15 100644 --- a/include/linux/pagemap.h +++ b/include/linux/pagemap.h @@ -24,6 +24,7 @@ enum mapping_flags { AS_ENOSPC = __GFP_BITS_SHIFT + 1, /* ENOSPC on async write */ AS_MM_ALL_LOCKS = __GFP_BITS_SHIFT + 2, /* under mm_take_all_locks() */ AS_UNEVICTABLE = __GFP_BITS_SHIFT + 3, /* e.g., ramdisk, SHM_LOCK */ + AS_BALLOON_MAP = __GFP_BITS_SHIFT + 4, /* balloon page special map */ }; static inline void mapping_set_error(struct address_space *mapping, int error) @@ -53,6 +54,21 @@ static inline int mapping_unevictable(struct address_space *mapping) return !!mapping; } +static inline void mapping_set_balloon(struct address_space *mapping) +{ + set_bit(AS_BALLOON_MAP, &mapping->flags); +} + +static inline void mapping_clear_balloon(struct address_space *mapping) +{ + clear_bit(AS_BALLOON_MAP, &mapping->flags); +} + +static inline int mapping_balloon(struct address_space *mapping) +{ + return mapping && test_bit(AS_BALLOON_MAP, &mapping->flags); +} + static inline gfp_t mapping_gfp_mask(struct address_space * mapping) { return (__force gfp_t)mapping->flags & __GFP_BITS_MASK; diff --git a/include/linux/pci.h b/include/linux/pci.h index ee2179546c63..15472d691ee6 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -333,6 +333,8 @@ struct pci_dev { }; struct pci_ats *ats; /* Address Translation Service */ #endif + phys_addr_t rom; /* Physical address of ROM if it's not from the BAR */ + size_t romlen; /* Length of ROM if it's not from the BAR */ }; static inline struct pci_dev *pci_physfn(struct pci_dev *dev) @@ -538,6 +540,9 @@ enum pci_ers_result { /* Device driver is fully recovered and operational */ PCI_ERS_RESULT_RECOVERED = (__force pci_ers_result_t) 5, + + /* No AER capabilities registered for the driver */ + PCI_ERS_RESULT_NO_AER_DRIVER = (__force pci_ers_result_t) 6, }; /* PCI bus error event callbacks */ @@ -573,6 +578,7 @@ struct pci_driver { int (*resume_early) (struct pci_dev *dev); int (*resume) (struct pci_dev *dev); /* Device woken up */ void (*shutdown) (struct pci_dev *dev); + int (*sriov_configure) (struct pci_dev *dev, int num_vfs); /* PF pdev */ const struct pci_error_handlers *err_handler; struct device_driver driver; struct pci_dynids dynids; @@ -588,7 +594,7 @@ struct pci_driver { * in a generic manner. */ #define DEFINE_PCI_DEVICE_TABLE(_table) \ - const struct pci_device_id _table[] __devinitconst + const struct pci_device_id _table[] /** * PCI_DEVICE - macro used to describe a specific pci device @@ -604,6 +610,20 @@ struct pci_driver { .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID /** + * PCI_DEVICE_SUB - macro used to describe a specific pci device with subsystem + * @vend: the 16 bit PCI Vendor ID + * @dev: the 16 bit PCI Device ID + * @subvend: the 16 bit PCI Subvendor ID + * @subdev: the 16 bit PCI Subdevice ID + * + * This macro is used to create a struct pci_device_id that matches a + * specific device with subsystem information. + */ +#define PCI_DEVICE_SUB(vend, dev, subvend, subdev) \ + .vendor = (vend), .device = (dev), \ + .subvendor = (subvend), .subdevice = (subdev) + +/** * PCI_DEVICE_CLASS - macro used to describe a specific pci device class * @dev_class: the class, subclass, prog-if triple for this device * @dev_class_mask: the class mask for this device @@ -686,7 +706,7 @@ struct pci_bus *pci_create_root_bus(struct device *parent, int bus, int pci_bus_insert_busn_res(struct pci_bus *b, int bus, int busmax); int pci_bus_update_busn_res_end(struct pci_bus *b, int busmax); void pci_bus_release_busn_res(struct pci_bus *b); -struct pci_bus * __devinit pci_scan_root_bus(struct device *parent, int bus, +struct pci_bus *pci_scan_root_bus(struct device *parent, int bus, struct pci_ops *ops, void *sysdata, struct list_head *resources); struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev, @@ -712,6 +732,8 @@ extern struct pci_dev *pci_dev_get(struct pci_dev *dev); extern void pci_dev_put(struct pci_dev *dev); extern void pci_remove_bus(struct pci_bus *b); extern void pci_stop_and_remove_bus_device(struct pci_dev *dev); +void pci_stop_root_bus(struct pci_bus *bus); +void pci_remove_root_bus(struct pci_bus *bus); void pci_setup_cardbus(struct pci_bus *bus); extern void pci_sort_breadthfirst(void); #define dev_is_pci(d) ((d)->bus == &pci_bus_type) @@ -941,10 +963,8 @@ void set_pcie_hotplug_bridge(struct pci_dev *pdev); /* Functions for PCI Hotplug drivers to use */ int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap); -#ifdef CONFIG_HOTPLUG unsigned int pci_rescan_bus_bridge_resize(struct pci_dev *bridge); unsigned int pci_rescan_bus(struct pci_bus *bus); -#endif /* Vital product data routines */ ssize_t pci_read_vpd(struct pci_dev *dev, loff_t pos, size_t count, void *buf); @@ -958,6 +978,7 @@ void pci_bus_size_bridges(struct pci_bus *bus); int pci_claim_resource(struct pci_dev *, int); void pci_assign_unassigned_resources(void); void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge); +void pci_assign_unassigned_bus_resources(struct pci_bus *bus); void pdev_enable_device(struct pci_dev *); int pci_enable_resources(struct pci_dev *, int mask); void pci_fixup_irqs(u8 (*)(struct pci_dev *, u8 *), @@ -1580,7 +1601,7 @@ extern int pci_pci_problems; extern unsigned long pci_cardbus_io_size; extern unsigned long pci_cardbus_mem_size; -extern u8 __devinitdata pci_dfl_cache_line_size; +extern u8 pci_dfl_cache_line_size; extern u8 pci_cache_line_size; extern unsigned long pci_hotplug_io_size; @@ -1592,6 +1613,7 @@ void pcibios_disable_device(struct pci_dev *dev); void pcibios_set_master(struct pci_dev *dev); int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state); +int pcibios_add_device(struct pci_dev *dev); #ifdef CONFIG_PCI_MMCONFIG extern void __init pci_mmcfg_early_init(void); @@ -1601,7 +1623,7 @@ static inline void pci_mmcfg_early_init(void) { } static inline void pci_mmcfg_late_init(void) { } #endif -int pci_ext_cfg_avail(struct pci_dev *dev); +int pci_ext_cfg_avail(void); void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar); @@ -1610,6 +1632,8 @@ extern int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn); extern void pci_disable_sriov(struct pci_dev *dev); extern irqreturn_t pci_sriov_migration(struct pci_dev *dev); extern int pci_num_vf(struct pci_dev *dev); +extern int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs); +extern int pci_sriov_get_totalvfs(struct pci_dev *dev); #else static inline int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn) { @@ -1626,6 +1650,14 @@ static inline int pci_num_vf(struct pci_dev *dev) { return 0; } +static inline int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs) +{ + return 0; +} +static inline int pci_sriov_get_totalvfs(struct pci_dev *dev) +{ + return 0; +} #endif #if defined(CONFIG_HOTPLUG_PCI) || defined(CONFIG_HOTPLUG_PCI_MODULE) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 9d36b829533a..0f8447376ddb 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1985,6 +1985,9 @@ #define PCI_DEVICE_ID_EXAR_XR17C152 0x0152 #define PCI_DEVICE_ID_EXAR_XR17C154 0x0154 #define PCI_DEVICE_ID_EXAR_XR17C158 0x0158 +#define PCI_DEVICE_ID_EXAR_XR17V352 0x0352 +#define PCI_DEVICE_ID_EXAR_XR17V354 0x0354 +#define PCI_DEVICE_ID_EXAR_XR17V358 0x0358 #define PCI_VENDOR_ID_MICROGATE 0x13c0 #define PCI_DEVICE_ID_MICROGATE_USC 0x0010 @@ -2323,6 +2326,8 @@ #define PCI_VENDOR_ID_TOPSPIN 0x1867 +#define PCI_VENDOR_ID_COMMTECH 0x18f7 + #define PCI_VENDOR_ID_SILAN 0x1904 #define PCI_VENDOR_ID_RENESAS 0x1912 diff --git a/include/linux/percpu-rwsem.h b/include/linux/percpu-rwsem.h index cf80f7e5277f..3e88c9a7d57f 100644 --- a/include/linux/percpu-rwsem.h +++ b/include/linux/percpu-rwsem.h @@ -1,89 +1,34 @@ #ifndef _LINUX_PERCPU_RWSEM_H #define _LINUX_PERCPU_RWSEM_H -#include <linux/mutex.h> +#include <linux/atomic.h> +#include <linux/rwsem.h> #include <linux/percpu.h> -#include <linux/rcupdate.h> -#include <linux/delay.h> +#include <linux/wait.h> +#include <linux/lockdep.h> struct percpu_rw_semaphore { - unsigned __percpu *counters; - bool locked; - struct mutex mtx; + unsigned int __percpu *fast_read_ctr; + atomic_t write_ctr; + struct rw_semaphore rw_sem; + atomic_t slow_read_ctr; + wait_queue_head_t write_waitq; }; -static inline void percpu_down_read(struct percpu_rw_semaphore *p) -{ - rcu_read_lock(); - if (unlikely(p->locked)) { - rcu_read_unlock(); - mutex_lock(&p->mtx); - this_cpu_inc(*p->counters); - mutex_unlock(&p->mtx); - return; - } - this_cpu_inc(*p->counters); - rcu_read_unlock(); -} +extern void percpu_down_read(struct percpu_rw_semaphore *); +extern void percpu_up_read(struct percpu_rw_semaphore *); -static inline void percpu_up_read(struct percpu_rw_semaphore *p) -{ - /* - * On X86, write operation in this_cpu_dec serves as a memory unlock - * barrier (i.e. memory accesses may be moved before the write, but - * no memory accesses are moved past the write). - * On other architectures this may not be the case, so we need smp_mb() - * there. - */ -#if defined(CONFIG_X86) && (!defined(CONFIG_X86_PPRO_FENCE) && !defined(CONFIG_X86_OOSTORE)) - barrier(); -#else - smp_mb(); -#endif - this_cpu_dec(*p->counters); -} - -static inline unsigned __percpu_count(unsigned __percpu *counters) -{ - unsigned total = 0; - int cpu; - - for_each_possible_cpu(cpu) - total += ACCESS_ONCE(*per_cpu_ptr(counters, cpu)); - - return total; -} - -static inline void percpu_down_write(struct percpu_rw_semaphore *p) -{ - mutex_lock(&p->mtx); - p->locked = true; - synchronize_rcu(); - while (__percpu_count(p->counters)) - msleep(1); - smp_rmb(); /* paired with smp_mb() in percpu_sem_up_read() */ -} - -static inline void percpu_up_write(struct percpu_rw_semaphore *p) -{ - p->locked = false; - mutex_unlock(&p->mtx); -} +extern void percpu_down_write(struct percpu_rw_semaphore *); +extern void percpu_up_write(struct percpu_rw_semaphore *); -static inline int percpu_init_rwsem(struct percpu_rw_semaphore *p) -{ - p->counters = alloc_percpu(unsigned); - if (unlikely(!p->counters)) - return -ENOMEM; - p->locked = false; - mutex_init(&p->mtx); - return 0; -} +extern int __percpu_init_rwsem(struct percpu_rw_semaphore *, + const char *, struct lock_class_key *); +extern void percpu_free_rwsem(struct percpu_rw_semaphore *); -static inline void percpu_free_rwsem(struct percpu_rw_semaphore *p) -{ - free_percpu(p->counters); - p->counters = NULL; /* catch use after free bugs */ -} +#define percpu_init_rwsem(brw) \ +({ \ + static struct lock_class_key rwsem_key; \ + __percpu_init_rwsem(brw, #brw, &rwsem_key); \ +}) #endif diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 2e902359aee5..6bfb2faa0b19 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -803,12 +803,16 @@ static inline void perf_event_task_tick(void) { } do { \ static struct notifier_block fn##_nb __cpuinitdata = \ { .notifier_call = fn, .priority = CPU_PRI_PERF }; \ + unsigned long cpu = smp_processor_id(); \ + unsigned long flags; \ fn(&fn##_nb, (unsigned long)CPU_UP_PREPARE, \ - (void *)(unsigned long)smp_processor_id()); \ + (void *)(unsigned long)cpu); \ + local_irq_save(flags); \ fn(&fn##_nb, (unsigned long)CPU_STARTING, \ - (void *)(unsigned long)smp_processor_id()); \ + (void *)(unsigned long)cpu); \ + local_irq_restore(flags); \ fn(&fn##_nb, (unsigned long)CPU_ONLINE, \ - (void *)(unsigned long)smp_processor_id()); \ + (void *)(unsigned long)cpu); \ register_cpu_notifier(&fn##_nb); \ } while (0) diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h index 00474b047145..bf285999273a 100644 --- a/include/linux/pid_namespace.h +++ b/include/linux/pid_namespace.h @@ -21,6 +21,7 @@ struct pid_namespace { struct kref kref; struct pidmap pidmap[PIDMAP_ENTRIES]; int last_pid; + int nr_hashed; struct task_struct *child_reaper; struct kmem_cache *pid_cachep; unsigned int level; @@ -31,9 +32,12 @@ struct pid_namespace { #ifdef CONFIG_BSD_PROCESS_ACCT struct bsd_acct_struct *bacct; #endif + struct user_namespace *user_ns; + struct work_struct proc_work; kgid_t pid_gid; int hide_pid; int reboot; /* group exit code if this pidns was rebooted */ + unsigned int proc_inum; }; extern struct pid_namespace init_pid_ns; @@ -46,16 +50,11 @@ static inline struct pid_namespace *get_pid_ns(struct pid_namespace *ns) return ns; } -extern struct pid_namespace *copy_pid_ns(unsigned long flags, struct pid_namespace *ns); -extern void free_pid_ns(struct kref *kref); +extern struct pid_namespace *copy_pid_ns(unsigned long flags, + struct user_namespace *user_ns, struct pid_namespace *ns); extern void zap_pid_ns_processes(struct pid_namespace *pid_ns); extern int reboot_pid_ns(struct pid_namespace *pid_ns, int cmd); - -static inline void put_pid_ns(struct pid_namespace *ns) -{ - if (ns != &init_pid_ns) - kref_put(&ns->kref, free_pid_ns); -} +extern void put_pid_ns(struct pid_namespace *ns); #else /* !CONFIG_PID_NS */ #include <linux/err.h> @@ -65,8 +64,8 @@ static inline struct pid_namespace *get_pid_ns(struct pid_namespace *ns) return ns; } -static inline struct pid_namespace * -copy_pid_ns(unsigned long flags, struct pid_namespace *ns) +static inline struct pid_namespace *copy_pid_ns(unsigned long flags, + struct user_namespace *user_ns, struct pid_namespace *ns) { if (flags & CLONE_NEWPID) ns = ERR_PTR(-EINVAL); diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index 4f0abb9f1c09..47a1bdd88878 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -46,11 +46,11 @@ * @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source * (open emitter). Sending this config will enabale open drain mode, the * argument is ignored. + * @PIN_CONFIG_INPUT_SCHMITT_DISABLE: disable schmitt-trigger mode on the pin. * @PIN_CONFIG_INPUT_SCHMITT: this will configure an input pin to run in * schmitt-trigger mode. If the schmitt-trigger has adjustable hysteresis, * the threshold value is given on a custom format as argument when - * setting pins to this mode. The argument zero turns the schmitt trigger - * off. + * setting pins to this mode. * @PIN_CONFIG_INPUT_DEBOUNCE: this will configure the pin to debounce mode, * which means it will wait for signals to settle when reading inputs. The * argument gives the debounce time on a custom format. Setting the @@ -74,6 +74,7 @@ enum pin_config_param { PIN_CONFIG_DRIVE_PUSH_PULL, PIN_CONFIG_DRIVE_OPEN_DRAIN, PIN_CONFIG_DRIVE_OPEN_SOURCE, + PIN_CONFIG_INPUT_SCHMITT_DISABLE, PIN_CONFIG_INPUT_SCHMITT, PIN_CONFIG_INPUT_DEBOUNCE, PIN_CONFIG_POWER_SOURCE, diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h index 7d087f03e91e..04d6700d99af 100644 --- a/include/linux/pinctrl/pinctrl.h +++ b/include/linux/pinctrl/pinctrl.h @@ -134,6 +134,25 @@ extern void pinctrl_add_gpio_range(struct pinctrl_dev *pctldev, extern void pinctrl_add_gpio_ranges(struct pinctrl_dev *pctldev, struct pinctrl_gpio_range *ranges, unsigned nranges); +extern void pinctrl_remove_gpio_range(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range); + +extern struct pinctrl_dev *pinctrl_find_and_add_gpio_range(const char *devname, + struct pinctrl_gpio_range *range); +extern struct pinctrl_gpio_range * +pinctrl_find_gpio_range_from_pin(struct pinctrl_dev *pctldev, + unsigned int pin); + +#ifdef CONFIG_OF +extern struct pinctrl_dev *of_pinctrl_get(struct device_node *np); +#else +static inline +struct pinctrl_dev *of_pinctrl_get(struct device_node *np) +{ + return NULL; +} +#endif /* CONFIG_OF */ + extern const char *pinctrl_dev_get_name(struct pinctrl_dev *pctldev); extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev); #else diff --git a/include/linux/platform_data/ad5449.h b/include/linux/platform_data/ad5449.h new file mode 100644 index 000000000000..bd712bd4b94e --- /dev/null +++ b/include/linux/platform_data/ad5449.h @@ -0,0 +1,40 @@ +/* + * AD5415, AD5426, AD5429, AD5432, AD5439, AD5443, AD5449 Digital to Analog + * Converter driver. + * + * Copyright 2012 Analog Devices Inc. + * Author: Lars-Peter Clausen <lars@metafoo.de> + * + * Licensed under the GPL-2. + */ + +#ifndef __LINUX_PLATFORM_DATA_AD5449_H__ +#define __LINUX_PLATFORM_DATA_AD5449_H__ + +/** + * enum ad5449_sdo_mode - AD5449 SDO pin configuration + * @AD5449_SDO_DRIVE_FULL: Drive the SDO pin with full strength. + * @AD5449_SDO_DRIVE_WEAK: Drive the SDO pin with not full strength. + * @AD5449_SDO_OPEN_DRAIN: Operate the SDO pin in open-drain mode. + * @AD5449_SDO_DISABLED: Disable the SDO pin, in this mode it is not possible to + * read back from the device. + */ +enum ad5449_sdo_mode { + AD5449_SDO_DRIVE_FULL = 0x0, + AD5449_SDO_DRIVE_WEAK = 0x1, + AD5449_SDO_OPEN_DRAIN = 0x2, + AD5449_SDO_DISABLED = 0x3, +}; + +/** + * struct ad5449_platform_data - Platform data for the ad5449 DAC driver + * @sdo_mode: SDO pin mode + * @hardware_clear_to_midscale: Whether asserting the hardware CLR pin sets the + * outputs to midscale (true) or to zero scale(false). + */ +struct ad5449_platform_data { + enum ad5449_sdo_mode sdo_mode; + bool hardware_clear_to_midscale; +}; + +#endif diff --git a/include/linux/platform_data/ad7298.h b/include/linux/platform_data/ad7298.h new file mode 100644 index 000000000000..fbf8adf1363a --- /dev/null +++ b/include/linux/platform_data/ad7298.h @@ -0,0 +1,20 @@ +/* + * AD7298 SPI ADC driver + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef __LINUX_PLATFORM_DATA_AD7298_H__ +#define __LINUX_PLATFORM_DATA_AD7298_H__ + +/** + * struct ad7298_platform_data - Platform data for the ad7298 ADC driver + * @ext_ref: Whether to use an external reference voltage. + **/ +struct ad7298_platform_data { + bool ext_ref; +}; + +#endif /* IIO_ADC_AD7298_H_ */ diff --git a/include/linux/platform_data/ad7793.h b/include/linux/platform_data/ad7793.h new file mode 100644 index 000000000000..7ea6751aae6d --- /dev/null +++ b/include/linux/platform_data/ad7793.h @@ -0,0 +1,112 @@ +/* + * AD7792/AD7793 SPI ADC driver + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ +#ifndef __LINUX_PLATFORM_DATA_AD7793_H__ +#define __LINUX_PLATFORM_DATA_AD7793_H__ + +/** + * enum ad7793_clock_source - AD7793 clock source selection + * @AD7793_CLK_SRC_INT: Internal 64 kHz clock, not available at the CLK pin. + * @AD7793_CLK_SRC_INT_CO: Internal 64 kHz clock, available at the CLK pin. + * @AD7793_CLK_SRC_EXT: Use external clock. + * @AD7793_CLK_SRC_EXT_DIV2: Use external clock divided by 2. + */ +enum ad7793_clock_source { + AD7793_CLK_SRC_INT, + AD7793_CLK_SRC_INT_CO, + AD7793_CLK_SRC_EXT, + AD7793_CLK_SRC_EXT_DIV2, +}; + +/** + * enum ad7793_bias_voltage - AD7793 bias voltage selection + * @AD7793_BIAS_VOLTAGE_DISABLED: Bias voltage generator disabled + * @AD7793_BIAS_VOLTAGE_AIN1: Bias voltage connected to AIN1(-). + * @AD7793_BIAS_VOLTAGE_AIN2: Bias voltage connected to AIN2(-). + * @AD7793_BIAS_VOLTAGE_AIN3: Bias voltage connected to AIN3(-). + * Only valid for AD7795/AD7796. + */ +enum ad7793_bias_voltage { + AD7793_BIAS_VOLTAGE_DISABLED, + AD7793_BIAS_VOLTAGE_AIN1, + AD7793_BIAS_VOLTAGE_AIN2, + AD7793_BIAS_VOLTAGE_AIN3, +}; + +/** + * enum ad7793_refsel - AD7793 reference voltage selection + * @AD7793_REFSEL_REFIN1: External reference applied between REFIN1(+) + * and REFIN1(-). + * @AD7793_REFSEL_REFIN2: External reference applied between REFIN2(+) and + * and REFIN1(-). Only valid for AD7795/AD7796. + * @AD7793_REFSEL_INTERNAL: Internal 1.17 V reference. + */ +enum ad7793_refsel { + AD7793_REFSEL_REFIN1 = 0, + AD7793_REFSEL_REFIN2 = 1, + AD7793_REFSEL_INTERNAL = 2, +}; + +/** + * enum ad7793_current_source_direction - AD7793 excitation current direction + * @AD7793_IEXEC1_IOUT1_IEXEC2_IOUT2: Current source IEXC1 connected to pin + * IOUT1, current source IEXC2 connected to pin IOUT2. + * @AD7793_IEXEC1_IOUT2_IEXEC2_IOUT1: Current source IEXC2 connected to pin + * IOUT1, current source IEXC1 connected to pin IOUT2. + * @AD7793_IEXEC1_IEXEC2_IOUT1: Both current sources connected to pin IOUT1. + * Only valid when the current sources are set to 10 uA or 210 uA. + * @AD7793_IEXEC1_IEXEC2_IOUT2: Both current sources connected to Pin IOUT2. + * Only valid when the current ources are set to 10 uA or 210 uA. + */ +enum ad7793_current_source_direction { + AD7793_IEXEC1_IOUT1_IEXEC2_IOUT2 = 0, + AD7793_IEXEC1_IOUT2_IEXEC2_IOUT1 = 1, + AD7793_IEXEC1_IEXEC2_IOUT1 = 2, + AD7793_IEXEC1_IEXEC2_IOUT2 = 3, +}; + +/** + * enum ad7793_excitation_current - AD7793 excitation current selection + * @AD7793_IX_DISABLED: Excitation current Disabled. + * @AD7793_IX_10uA: Enable 10 micro-ampere excitation current. + * @AD7793_IX_210uA: Enable 210 micro-ampere excitation current. + * @AD7793_IX_1mA: Enable 1 milli-Ampere excitation current. + */ +enum ad7793_excitation_current { + AD7793_IX_DISABLED = 0, + AD7793_IX_10uA = 1, + AD7793_IX_210uA = 2, + AD7793_IX_1mA = 3, +}; + +/** + * struct ad7793_platform_data - AD7793 platform data + * @clock_src: Clock source selection + * @burnout_current: If set to true the 100nA burnout current is enabled. + * @boost_enable: Enable boost for the bias voltage generator. + * @buffered: If set to true configure the device for buffered input mode. + * @unipolar: If set to true sample in unipolar mode, if set to false sample in + * bipolar mode. + * @refsel: Reference voltage selection + * @bias_voltage: Bias voltage selection + * @exitation_current: Excitation current selection + * @current_source_direction: Excitation current direction selection + */ +struct ad7793_platform_data { + enum ad7793_clock_source clock_src; + bool burnout_current; + bool boost_enable; + bool buffered; + bool unipolar; + + enum ad7793_refsel refsel; + enum ad7793_bias_voltage bias_voltage; + enum ad7793_excitation_current exitation_current; + enum ad7793_current_source_direction current_source_direction; +}; + +#endif /* IIO_ADC_AD7793_H_ */ diff --git a/include/linux/platform_data/ad7887.h b/include/linux/platform_data/ad7887.h new file mode 100644 index 000000000000..1e06eac3174d --- /dev/null +++ b/include/linux/platform_data/ad7887.h @@ -0,0 +1,26 @@ +/* + * AD7887 SPI ADC driver + * + * Copyright 2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ +#ifndef IIO_ADC_AD7887_H_ +#define IIO_ADC_AD7887_H_ + +/** + * struct ad7887_platform_data - AD7887 ADC driver platform data + * @en_dual: Whether to use dual channel mode. If set to true AIN1 becomes the + * second input channel, and Vref is internally connected to Vdd. If set to + * false the device is used in single channel mode and AIN1/Vref is used as + * VREF input. + * @use_onchip_ref: Whether to use the onchip reference. If set to true the + * internal 2.5V reference is used. If set to false a external reference is + * used. + */ +struct ad7887_platform_data { + bool en_dual; + bool use_onchip_ref; +}; + +#endif /* IIO_ADC_AD7887_H_ */ diff --git a/include/linux/platform_data/ads7828.h b/include/linux/platform_data/ads7828.h new file mode 100644 index 000000000000..3245f45f9d77 --- /dev/null +++ b/include/linux/platform_data/ads7828.h @@ -0,0 +1,29 @@ +/* + * TI ADS7828 A/D Converter platform data definition + * + * Copyright (c) 2012 Savoir-faire Linux Inc. + * Vivien Didelot <vivien.didelot@savoirfairelinux.com> + * + * For further information, see the Documentation/hwmon/ads7828 file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _PDATA_ADS7828_H +#define _PDATA_ADS7828_H + +/** + * struct ads7828_platform_data - optional ADS7828 connectivity info + * @diff_input: Differential input mode. + * @ext_vref: Use an external voltage reference. + * @vref_mv: Voltage reference value, if external. + */ +struct ads7828_platform_data { + bool diff_input; + bool ext_vref; + unsigned int vref_mv; +}; + +#endif /* _PDATA_ADS7828_H */ diff --git a/include/linux/platform_data/asoc-imx-ssi.h b/include/linux/platform_data/asoc-imx-ssi.h index 63f3c2804239..92c7fd72f636 100644 --- a/include/linux/platform_data/asoc-imx-ssi.h +++ b/include/linux/platform_data/asoc-imx-ssi.h @@ -17,5 +17,7 @@ struct imx_ssi_platform_data { void (*ac97_warm_reset)(struct snd_ac97 *ac97); }; +extern int mxc_set_irq_fiq(unsigned int irq, unsigned int type); + #endif /* __MACH_SSI_H */ diff --git a/include/linux/platform_data/asoc-s3c.h b/include/linux/platform_data/asoc-s3c.h index aa9875f77c40..88272591a895 100644 --- a/include/linux/platform_data/asoc-s3c.h +++ b/include/linux/platform_data/asoc-s3c.h @@ -38,12 +38,6 @@ struct samsung_i2s { #define QUIRK_NEED_RSTCLR (1 << 3) /* Quirks of the I2S controller */ u32 quirks; - - /* - * Array of clock names that can be used to generate I2S signals. - * Also corresponds to clocks of I2SMOD[10] - */ - const char **src_clk; dma_addr_t idma_addr; }; diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h index b0f2c56a8ea2..6a293b7fff3b 100644 --- a/include/linux/platform_data/atmel.h +++ b/include/linux/platform_data/atmel.h @@ -8,6 +8,55 @@ #define __ATMEL_H__ #include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/leds.h> +#include <linux/spi/spi.h> +#include <linux/usb/atmel_usba_udc.h> +#include <linux/atmel-mci.h> +#include <sound/atmel-ac97c.h> +#include <linux/serial.h> +#include <linux/platform_data/macb.h> + +/* + * at91: 6 USARTs and one DBGU port (SAM9260) + * avr32: 4 + */ +#define ATMEL_MAX_UART 7 + + /* USB Device */ +struct at91_udc_data { + int vbus_pin; /* high == host powering us */ + u8 vbus_active_low; /* vbus polarity */ + u8 vbus_polled; /* Use polling, not interrupt */ + int pullup_pin; /* active == D+ pulled up */ + u8 pullup_active_low; /* true == pullup_pin is active low */ +}; + + /* Compact Flash */ +struct at91_cf_data { + int irq_pin; /* I/O IRQ */ + int det_pin; /* Card detect */ + int vcc_pin; /* power switching */ + int rst_pin; /* card reset */ + u8 chipselect; /* EBI Chip Select number */ + u8 flags; +#define AT91_CF_TRUE_IDE 0x01 +#define AT91_IDE_SWAP_A0_A2 0x02 +}; + + /* USB Host */ +#define AT91_MAX_USBH_PORTS 3 +struct at91_usbh_data { + int vbus_pin[AT91_MAX_USBH_PORTS]; /* port power-control pin */ + int overcurrent_pin[AT91_MAX_USBH_PORTS]; + u8 ports; /* number of ports on root hub */ + u8 overcurrent_supported; + u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS]; + u8 overcurrent_status[AT91_MAX_USBH_PORTS]; + u8 overcurrent_changed[AT91_MAX_USBH_PORTS]; +}; /* NAND / SmartMedia */ struct atmel_nand_data { @@ -24,4 +73,28 @@ struct atmel_nand_data { unsigned int num_parts; }; + /* Serial */ +struct atmel_uart_data { + int num; /* port num */ + short use_dma_tx; /* use transmit DMA? */ + short use_dma_rx; /* use receive DMA? */ + void __iomem *regs; /* virt. base address, if any */ + struct serial_rs485 rs485; /* rs485 settings */ +}; + + /* Touchscreen Controller */ +struct at91_tsadcc_data { + unsigned int adc_clock; + u8 pendet_debounce; + u8 ts_sample_hold_time; +}; + +/* CAN */ +struct at91_can_data { + void (*transceiver_switch)(int on); +}; + +/* FIXME: this needs a better location, but gets stuff building again */ +extern int at91_suspend_entering_slow_clock(void); + #endif /* __ATMEL_H__ */ diff --git a/include/linux/platform_data/clk-integrator.h b/include/linux/platform_data/clk-integrator.h index 83fe9c283bb8..280edac9d0a5 100644 --- a/include/linux/platform_data/clk-integrator.h +++ b/include/linux/platform_data/clk-integrator.h @@ -1 +1,3 @@ void integrator_clk_init(bool is_cp); +void integrator_impd1_clk_init(void __iomem *base, unsigned int id); +void integrator_impd1_clk_exit(unsigned int id); diff --git a/include/linux/platform_data/clocksource-nomadik-mtu.h b/include/linux/platform_data/clocksource-nomadik-mtu.h new file mode 100644 index 000000000000..80088973b734 --- /dev/null +++ b/include/linux/platform_data/clocksource-nomadik-mtu.h @@ -0,0 +1,9 @@ +#ifndef __PLAT_MTU_H +#define __PLAT_MTU_H + +void nmdk_timer_init(void __iomem *base, int irq); +void nmdk_clkevt_reset(void); +void nmdk_clksrc_reset(void); + +#endif /* __PLAT_MTU_H */ + diff --git a/include/linux/platform_data/cpsw.h b/include/linux/platform_data/cpsw.h index c4e23d029498..24368a2e8b87 100644 --- a/include/linux/platform_data/cpsw.h +++ b/include/linux/platform_data/cpsw.h @@ -18,9 +18,7 @@ #include <linux/if_ether.h> struct cpsw_slave_data { - u32 slave_reg_ofs; - u32 sliver_reg_ofs; - const char *phy_id; + char phy_id[MII_BUS_ID_SIZE]; int phy_if; u8 mac_addr[ETH_ALEN]; }; @@ -28,27 +26,14 @@ struct cpsw_slave_data { struct cpsw_platform_data { u32 ss_reg_ofs; /* Subsystem control register offset */ u32 channels; /* number of cpdma channels (symmetric) */ - u32 cpdma_reg_ofs; /* cpdma register offset */ - u32 cpdma_sram_ofs; /* cpdma sram offset */ - u32 slaves; /* number of slave cpgmac ports */ struct cpsw_slave_data *slave_data; - - u32 ale_reg_ofs; /* address lookup engine reg offset */ + u32 cpts_active_slave; /* time stamping slave */ + u32 cpts_clock_mult; /* convert input clock ticks to nanoseconds */ + u32 cpts_clock_shift; /* convert input clock ticks to nanoseconds */ u32 ale_entries; /* ale table size */ - - u32 host_port_reg_ofs; /* cpsw cpdma host port registers */ - u32 host_port_num; /* The port number for the host port */ - - u32 hw_stats_reg_ofs; /* cpsw hardware statistics counters */ - - u32 bd_ram_ofs; /* embedded buffer descriptor RAM offset*/ u32 bd_ram_size; /*buffer descriptor ram size */ - u32 hw_ram_addr; /*if the HW address for BD RAM is different */ - bool no_bd_ram; /* no embedded BD ram*/ - u32 rx_descs; /* Number of Rx Descriptios */ - u32 mac_control; /* Mac control register */ }; diff --git a/include/linux/platform_data/crypto-ux500.h b/include/linux/platform_data/crypto-ux500.h index 5b2d0817e26a..94df96d9a336 100644 --- a/include/linux/platform_data/crypto-ux500.h +++ b/include/linux/platform_data/crypto-ux500.h @@ -7,7 +7,7 @@ #ifndef _CRYPTO_UX500_H #define _CRYPTO_UX500_H #include <linux/dmaengine.h> -#include <plat/ste_dma40.h> +#include <linux/platform_data/dma-ste-dma40.h> struct hash_platform_data { void *mem_to_engine; diff --git a/include/linux/platform_data/davinci_asp.h b/include/linux/platform_data/davinci_asp.h index d0c5825876f8..8db5ae03b6e3 100644 --- a/include/linux/platform_data/davinci_asp.h +++ b/include/linux/platform_data/davinci_asp.h @@ -16,12 +16,13 @@ #ifndef __DAVINCI_ASP_H #define __DAVINCI_ASP_H +#include <linux/genalloc.h> + struct snd_platform_data { u32 tx_dma_offset; u32 rx_dma_offset; int asp_chan_q; /* event queue number for ASP channel */ int ram_chan_q; /* event queue number for RAM channel */ - unsigned int codec_fmt; /* * Allowing this is more efficient and eliminates left and right swaps * caused by underruns, but will swap the left and right channels @@ -30,6 +31,7 @@ struct snd_platform_data { unsigned enable_channel_combine:1; unsigned sram_size_playback; unsigned sram_size_capture; + struct gen_pool *sram_pool; /* * If McBSP peripheral gets the clock from an external pin, diff --git a/include/linux/platform_data/db8500_thermal.h b/include/linux/platform_data/db8500_thermal.h new file mode 100644 index 000000000000..3bf60902e902 --- /dev/null +++ b/include/linux/platform_data/db8500_thermal.h @@ -0,0 +1,38 @@ +/* + * db8500_thermal.h - DB8500 Thermal Management Implementation + * + * Copyright (C) 2012 ST-Ericsson + * Copyright (C) 2012 Linaro Ltd. + * + * Author: Hongbo Zhang <hongbo.zhang@linaro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DB8500_THERMAL_H_ +#define _DB8500_THERMAL_H_ + +#include <linux/thermal.h> + +#define COOLING_DEV_MAX 8 + +struct db8500_trip_point { + unsigned long temp; + enum thermal_trip_type type; + char cdev_name[COOLING_DEV_MAX][THERMAL_NAME_LENGTH]; +}; + +struct db8500_thsens_platform_data { + struct db8500_trip_point trip_points[THERMAL_MAX_TRIPS]; + int num_trips; +}; + +#endif /* _DB8500_THERMAL_H_ */ diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h index 1b9080385b46..f6d30cc1cb77 100644 --- a/include/linux/platform_data/dma-imx.h +++ b/include/linux/platform_data/dma-imx.h @@ -61,7 +61,9 @@ static inline int imx_dma_is_ipu(struct dma_chan *chan) static inline int imx_dma_is_general_purpose(struct dma_chan *chan) { return strstr(dev_name(chan->device->dev), "sdma") || - !strcmp(dev_name(chan->device->dev), "imx-dma"); + !strcmp(dev_name(chan->device->dev), "imx1-dma") || + !strcmp(dev_name(chan->device->dev), "imx21-dma") || + !strcmp(dev_name(chan->device->dev), "imx27-dma"); } #endif diff --git a/include/linux/platform_data/dma-mv_xor.h b/include/linux/platform_data/dma-mv_xor.h index 2ba1f7d76eef..8ec18f64e396 100644 --- a/include/linux/platform_data/dma-mv_xor.h +++ b/include/linux/platform_data/dma-mv_xor.h @@ -10,15 +10,14 @@ #include <linux/dmaengine.h> #include <linux/mbus.h> -#define MV_XOR_SHARED_NAME "mv_xor_shared" -#define MV_XOR_NAME "mv_xor" +#define MV_XOR_NAME "mv_xor" -struct mv_xor_platform_data { - struct platform_device *shared; - int hw_id; +struct mv_xor_channel_data { dma_cap_mask_t cap_mask; - size_t pool_size; }; +struct mv_xor_platform_data { + struct mv_xor_channel_data *channels; +}; #endif diff --git a/include/linux/platform_data/dma-ste-dma40.h b/include/linux/platform_data/dma-ste-dma40.h new file mode 100644 index 000000000000..9ff93b065686 --- /dev/null +++ b/include/linux/platform_data/dma-ste-dma40.h @@ -0,0 +1,223 @@ +/* + * Copyright (C) ST-Ericsson SA 2007-2010 + * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson + * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + + +#ifndef STE_DMA40_H +#define STE_DMA40_H + +#include <linux/dmaengine.h> +#include <linux/scatterlist.h> +#include <linux/workqueue.h> +#include <linux/interrupt.h> + +/* + * Maxium size for a single dma descriptor + * Size is limited to 16 bits. + * Size is in the units of addr-widths (1,2,4,8 bytes) + * Larger transfers will be split up to multiple linked desc + */ +#define STEDMA40_MAX_SEG_SIZE 0xFFFF + +/* dev types for memcpy */ +#define STEDMA40_DEV_DST_MEMORY (-1) +#define STEDMA40_DEV_SRC_MEMORY (-1) + +enum stedma40_mode { + STEDMA40_MODE_LOGICAL = 0, + STEDMA40_MODE_PHYSICAL, + STEDMA40_MODE_OPERATION, +}; + +enum stedma40_mode_opt { + STEDMA40_PCHAN_BASIC_MODE = 0, + STEDMA40_LCHAN_SRC_LOG_DST_LOG = 0, + STEDMA40_PCHAN_MODULO_MODE, + STEDMA40_PCHAN_DOUBLE_DST_MODE, + STEDMA40_LCHAN_SRC_PHY_DST_LOG, + STEDMA40_LCHAN_SRC_LOG_DST_PHY, +}; + +#define STEDMA40_ESIZE_8_BIT 0x0 +#define STEDMA40_ESIZE_16_BIT 0x1 +#define STEDMA40_ESIZE_32_BIT 0x2 +#define STEDMA40_ESIZE_64_BIT 0x3 + +/* The value 4 indicates that PEN-reg shall be set to 0 */ +#define STEDMA40_PSIZE_PHY_1 0x4 +#define STEDMA40_PSIZE_PHY_2 0x0 +#define STEDMA40_PSIZE_PHY_4 0x1 +#define STEDMA40_PSIZE_PHY_8 0x2 +#define STEDMA40_PSIZE_PHY_16 0x3 + +/* + * The number of elements differ in logical and + * physical mode + */ +#define STEDMA40_PSIZE_LOG_1 STEDMA40_PSIZE_PHY_2 +#define STEDMA40_PSIZE_LOG_4 STEDMA40_PSIZE_PHY_4 +#define STEDMA40_PSIZE_LOG_8 STEDMA40_PSIZE_PHY_8 +#define STEDMA40_PSIZE_LOG_16 STEDMA40_PSIZE_PHY_16 + +/* Maximum number of possible physical channels */ +#define STEDMA40_MAX_PHYS 32 + +enum stedma40_flow_ctrl { + STEDMA40_NO_FLOW_CTRL, + STEDMA40_FLOW_CTRL, +}; + +enum stedma40_periph_data_width { + STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT, + STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT, + STEDMA40_WORD_WIDTH = STEDMA40_ESIZE_32_BIT, + STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT +}; + +enum stedma40_xfer_dir { + STEDMA40_MEM_TO_MEM = 1, + STEDMA40_MEM_TO_PERIPH, + STEDMA40_PERIPH_TO_MEM, + STEDMA40_PERIPH_TO_PERIPH +}; + + +/** + * struct stedma40_chan_cfg - dst/src channel configuration + * + * @big_endian: true if the src/dst should be read as big endian + * @data_width: Data width of the src/dst hardware + * @p_size: Burst size + * @flow_ctrl: Flow control on/off. + */ +struct stedma40_half_channel_info { + bool big_endian; + enum stedma40_periph_data_width data_width; + int psize; + enum stedma40_flow_ctrl flow_ctrl; +}; + +/** + * struct stedma40_chan_cfg - Structure to be filled by client drivers. + * + * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH + * @high_priority: true if high-priority + * @realtime: true if realtime mode is to be enabled. Only available on DMA40 + * version 3+, i.e DB8500v2+ + * @mode: channel mode: physical, logical, or operation + * @mode_opt: options for the chosen channel mode + * @src_dev_type: Src device type + * @dst_dev_type: Dst device type + * @src_info: Parameters for dst half channel + * @dst_info: Parameters for dst half channel + * @use_fixed_channel: if true, use physical channel specified by phy_channel + * @phy_channel: physical channel to use, only if use_fixed_channel is true + * + * This structure has to be filled by the client drivers. + * It is recommended to do all dma configurations for clients in the machine. + * + */ +struct stedma40_chan_cfg { + enum stedma40_xfer_dir dir; + bool high_priority; + bool realtime; + enum stedma40_mode mode; + enum stedma40_mode_opt mode_opt; + int src_dev_type; + int dst_dev_type; + struct stedma40_half_channel_info src_info; + struct stedma40_half_channel_info dst_info; + + bool use_fixed_channel; + int phy_channel; +}; + +/** + * struct stedma40_platform_data - Configuration struct for the dma device. + * + * @dev_len: length of dev_tx and dev_rx + * @dev_tx: mapping between destination event line and io address + * @dev_rx: mapping between source event line and io address + * @memcpy: list of memcpy event lines + * @memcpy_len: length of memcpy + * @memcpy_conf_phy: default configuration of physical channel memcpy + * @memcpy_conf_log: default configuration of logical channel memcpy + * @disabled_channels: A vector, ending with -1, that marks physical channels + * that are for different reasons not available for the driver. + */ +struct stedma40_platform_data { + u32 dev_len; + const dma_addr_t *dev_tx; + const dma_addr_t *dev_rx; + int *memcpy; + u32 memcpy_len; + struct stedma40_chan_cfg *memcpy_conf_phy; + struct stedma40_chan_cfg *memcpy_conf_log; + int disabled_channels[STEDMA40_MAX_PHYS]; + bool use_esram_lcla; +}; + +#ifdef CONFIG_STE_DMA40 + +/** + * stedma40_filter() - Provides stedma40_chan_cfg to the + * ste_dma40 dma driver via the dmaengine framework. + * does some checking of what's provided. + * + * Never directly called by client. It used by dmaengine. + * @chan: dmaengine handle. + * @data: Must be of type: struct stedma40_chan_cfg and is + * the configuration of the framework. + * + * + */ + +bool stedma40_filter(struct dma_chan *chan, void *data); + +/** + * stedma40_slave_mem() - Transfers a raw data buffer to or from a slave + * (=device) + * + * @chan: dmaengine handle + * @addr: source or destination physicall address. + * @size: bytes to transfer + * @direction: direction of transfer + * @flags: is actually enum dma_ctrl_flags. See dmaengine.h + */ + +static inline struct +dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, + dma_addr_t addr, + unsigned int size, + enum dma_transfer_direction direction, + unsigned long flags) +{ + struct scatterlist sg; + sg_init_table(&sg, 1); + sg.dma_address = addr; + sg.length = size; + + return dmaengine_prep_slave_sg(chan, &sg, 1, direction, flags); +} + +#else +static inline bool stedma40_filter(struct dma_chan *chan, void *data) +{ + return false; +} + +static inline struct +dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, + dma_addr_t addr, + unsigned int size, + enum dma_transfer_direction direction, + unsigned long flags) +{ + return NULL; +} +#endif + +#endif diff --git a/include/linux/platform_data/dmtimer-omap.h b/include/linux/platform_data/dmtimer-omap.h new file mode 100644 index 000000000000..a19b78d826e9 --- /dev/null +++ b/include/linux/platform_data/dmtimer-omap.h @@ -0,0 +1,31 @@ +/* + * DMTIMER platform data for TI OMAP platforms + * + * Copyright (C) 2012 Texas Instruments + * Author: Jon Hunter <jon-hunter@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __PLATFORM_DATA_DMTIMER_OMAP_H__ +#define __PLATFORM_DATA_DMTIMER_OMAP_H__ + +struct dmtimer_platform_data { + /* set_timer_src - Only used for OMAP1 devices */ + int (*set_timer_src)(struct platform_device *pdev, int source); + u32 timer_capability; + u32 timer_errata; + int (*get_context_loss_count)(struct device *); +}; + +#endif /* __PLATFORM_DATA_DMTIMER_OMAP_H__ */ diff --git a/include/linux/platform_data/gpio-omap.h b/include/linux/platform_data/gpio-omap.h index e8741c2678d5..5d50b25a73d7 100644 --- a/include/linux/platform_data/gpio-omap.h +++ b/include/linux/platform_data/gpio-omap.h @@ -26,7 +26,6 @@ #include <linux/io.h> #include <linux/platform_device.h> -#include <mach/irqs.h> #define OMAP1_MPUIO_BASE 0xfffb5000 diff --git a/include/linux/platform_data/gpio-ts5500.h b/include/linux/platform_data/gpio-ts5500.h new file mode 100644 index 000000000000..b10d11c9bb49 --- /dev/null +++ b/include/linux/platform_data/gpio-ts5500.h @@ -0,0 +1,27 @@ +/* + * GPIO (DIO) header for Technologic Systems TS-5500 + * + * Copyright (c) 2012 Savoir-faire Linux Inc. + * Vivien Didelot <vivien.didelot@savoirfairelinux.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _PDATA_GPIO_TS5500_H +#define _PDATA_GPIO_TS5500_H + +/** + * struct ts5500_dio_platform_data - TS-5500 pin block configuration + * @base: The GPIO base number to use. + * @strap: The only pin connected to an interrupt in a block is input-only. + * If you need a bidirectional line which can trigger an IRQ, you + * may strap it with an in/out pin. This flag indicates this case. + */ +struct ts5500_dio_platform_data { + int base; + bool strap; +}; + +#endif /* _PDATA_GPIO_TS5500_H */ diff --git a/include/linux/platform_data/i2c-cbus-gpio.h b/include/linux/platform_data/i2c-cbus-gpio.h new file mode 100644 index 000000000000..6faa992a9502 --- /dev/null +++ b/include/linux/platform_data/i2c-cbus-gpio.h @@ -0,0 +1,27 @@ +/* + * i2c-cbus-gpio.h - CBUS I2C platform_data definition + * + * Copyright (C) 2004-2009 Nokia Corporation + * + * Written by Felipe Balbi and Aaro Koskinen. + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __INCLUDE_LINUX_I2C_CBUS_GPIO_H +#define __INCLUDE_LINUX_I2C_CBUS_GPIO_H + +struct i2c_cbus_platform_data { + int dat_gpio; + int clk_gpio; + int sel_gpio; +}; + +#endif /* __INCLUDE_LINUX_I2C_CBUS_GPIO_H */ diff --git a/include/linux/platform_data/iommu-omap.h b/include/linux/platform_data/iommu-omap.h new file mode 100644 index 000000000000..c677b9f2fefa --- /dev/null +++ b/include/linux/platform_data/iommu-omap.h @@ -0,0 +1,49 @@ +/* + * omap iommu: main structures + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define MMU_REG_SIZE 256 + +/** + * struct iommu_arch_data - omap iommu private data + * @name: name of the iommu device + * @iommu_dev: handle of the iommu device + * + * This is an omap iommu private data object, which binds an iommu user + * to its iommu device. This object should be placed at the iommu user's + * dev_archdata so generic IOMMU API can be used without having to + * utilize omap-specific plumbing anymore. + */ +struct omap_iommu_arch_data { + const char *name; + struct omap_iommu *iommu_dev; +}; + +/** + * struct omap_mmu_dev_attr - OMAP mmu device attributes for omap_hwmod + * @da_start: device address where the va space starts. + * @da_end: device address where the va space ends. + * @nr_tlb_entries: number of entries supported by the translation + * look-aside buffer (TLB). + */ +struct omap_mmu_dev_attr { + u32 da_start; + u32 da_end; + int nr_tlb_entries; +}; + +struct iommu_platform_data { + const char *name; + const char *clk_name; + const int nr_tlb_entries; + u32 da_start; + u32 da_end; +}; diff --git a/include/linux/platform_data/leds-omap.h b/include/linux/platform_data/leds-omap.h new file mode 100644 index 000000000000..56c9b2a0ada5 --- /dev/null +++ b/include/linux/platform_data/leds-omap.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2006 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef ASMARM_ARCH_LED_H +#define ASMARM_ARCH_LED_H + +struct omap_led_config { + struct led_classdev cdev; + s16 gpio; +}; + +struct omap_led_platform_data { + s16 nr_leds; + struct omap_led_config *leds; +}; + +#endif diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h index 761f31752367..e81f62d24ee2 100644 --- a/include/linux/platform_data/lp855x.h +++ b/include/linux/platform_data/lp855x.h @@ -89,11 +89,6 @@ enum lp8556_brightness_source { LP8556_COMBINED2, /* pwm + i2c after the shaper block */ }; -struct lp855x_pwm_data { - void (*pwm_set_intensity) (int brightness, int max_brightness); - int (*pwm_get_intensity) (int max_brightness); -}; - struct lp855x_rom_data { u8 addr; u8 val; @@ -105,7 +100,7 @@ struct lp855x_rom_data { * @mode : brightness control by pwm or lp855x register * @device_control : value of DEVICE CONTROL register * @initial_brightness : initial value of backlight brightness - * @pwm_data : platform specific pwm generation functions. + * @period_ns : platform specific pwm period value. unit is nano. Only valid when mode is PWM_BASED. * @load_new_rom_data : 0 : use default configuration data @@ -118,7 +113,7 @@ struct lp855x_platform_data { enum lp855x_brightness_ctrl_mode mode; u8 device_control; int initial_brightness; - struct lp855x_pwm_data pwm_data; + unsigned int period_ns; u8 load_new_rom_data; int size_program; struct lp855x_rom_data *rom_data; diff --git a/include/linux/platform_data/macb.h b/include/linux/platform_data/macb.h index b081c7245ec8..044a124bfbbc 100644 --- a/include/linux/platform_data/macb.h +++ b/include/linux/platform_data/macb.h @@ -12,6 +12,7 @@ struct macb_platform_data { u32 phy_mask; int phy_irq_pin; /* PHY IRQ */ u8 is_rmii; /* using RMII interface? */ + u8 rev_eth_addr; /* reverse Ethernet address byte order */ }; #endif /* __MACB_PDATA_H__ */ diff --git a/include/linux/platform_data/mmc-omap.h b/include/linux/platform_data/mmc-omap.h new file mode 100644 index 000000000000..2bf1b30cb5dc --- /dev/null +++ b/include/linux/platform_data/mmc-omap.h @@ -0,0 +1,151 @@ +/* + * MMC definitions for OMAP2 + * + * Copyright (C) 2006 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define OMAP_MMC_MAX_SLOTS 2 + +/* + * struct omap_mmc_dev_attr.flags possibilities + * + * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can + * operate with either 1.8Vdc or 3.0Vdc card voltages; this flag + * should be set if this is the case. See for example Section 22.5.3 + * "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia + * Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R). + * + * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers + * don't work correctly on some MMC controller instances on some + * OMAP3 SoCs; this flag should be set if this is the case. See + * for example Advisory 2.1.1.128 "MMC: Multiple Block Read + * Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_ + * Revision F (October 2010) (SPRZ278F). + */ +#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0) +#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1) + +struct mmc_card; + +struct omap_mmc_dev_attr { + u8 flags; +}; + +struct omap_mmc_platform_data { + /* back-link to device */ + struct device *dev; + + /* number of slots per controller */ + unsigned nr_slots:2; + + /* set if your board has components or wiring that limits the + * maximum frequency on the MMC bus */ + unsigned int max_freq; + + /* switch the bus to a new slot */ + int (*switch_slot)(struct device *dev, int slot); + /* initialize board-specific MMC functionality, can be NULL if + * not supported */ + int (*init)(struct device *dev); + void (*cleanup)(struct device *dev); + void (*shutdown)(struct device *dev); + + /* To handle board related suspend/resume functionality for MMC */ + int (*suspend)(struct device *dev, int slot); + int (*resume)(struct device *dev, int slot); + + /* Return context loss count due to PM states changing */ + int (*get_context_loss_count)(struct device *dev); + + /* Integrating attributes from the omap_hwmod layer */ + u8 controller_flags; + + /* Register offset deviation */ + u16 reg_offset; + + struct omap_mmc_slot_data { + + /* + * 4/8 wires and any additional host capabilities + * need to OR'd all capabilities (ref. linux/mmc/host.h) + */ + u8 wires; /* Used for the MMC driver on omap1 and 2420 */ + u32 caps; /* Used for the MMC driver on 2430 and later */ + u32 pm_caps; /* PM capabilities of the mmc */ + + /* + * nomux means "standard" muxing is wrong on this board, and + * that board-specific code handled it before common init logic. + */ + unsigned nomux:1; + + /* switch pin can be for card detect (default) or card cover */ + unsigned cover:1; + + /* use the internal clock */ + unsigned internal_clock:1; + + /* nonremovable e.g. eMMC */ + unsigned nonremovable:1; + + /* Try to sleep or power off when possible */ + unsigned power_saving:1; + + /* If using power_saving and the MMC power is not to go off */ + unsigned no_off:1; + + /* eMMC does not handle power off when not in sleep state */ + unsigned no_regulator_off_init:1; + + /* Regulator off remapped to sleep */ + unsigned vcc_aux_disable_is_sleep:1; + + /* we can put the features above into this variable */ +#define HSMMC_HAS_PBIAS (1 << 0) +#define HSMMC_HAS_UPDATED_RESET (1 << 1) +#define HSMMC_HAS_HSPE_SUPPORT (1 << 2) +#define MMC_OMAP7XX (1 << 3) +#define MMC_OMAP15XX (1 << 4) +#define MMC_OMAP16XX (1 << 5) + unsigned features; + + int switch_pin; /* gpio (card detect) */ + int gpio_wp; /* gpio (write protect) */ + + int (*set_bus_mode)(struct device *dev, int slot, int bus_mode); + int (*set_power)(struct device *dev, int slot, + int power_on, int vdd); + int (*get_ro)(struct device *dev, int slot); + void (*remux)(struct device *dev, int slot, int power_on); + /* Call back before enabling / disabling regulators */ + void (*before_set_reg)(struct device *dev, int slot, + int power_on, int vdd); + /* Call back after enabling / disabling regulators */ + void (*after_set_reg)(struct device *dev, int slot, + int power_on, int vdd); + /* if we have special card, init it using this callback */ + void (*init_card)(struct mmc_card *card); + + /* return MMC cover switch state, can be NULL if not supported. + * + * possible return values: + * 0 - closed + * 1 - open + */ + int (*get_cover_state)(struct device *dev, int slot); + + const char *name; + u32 ocr_mask; + + /* Card detection IRQs */ + int card_detect_irq; + int (*card_detect)(struct device *dev, int slot); + + unsigned int ban_openended:1; + + } slots[OMAP_MMC_MAX_SLOTS]; +}; diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h index 1a68c1e5fe53..24d32ca34bef 100644 --- a/include/linux/platform_data/mtd-nand-omap2.h +++ b/include/linux/platform_data/mtd-nand-omap2.h @@ -8,9 +8,13 @@ * published by the Free Software Foundation. */ -#include <plat/gpmc.h> +#ifndef _MTD_NAND_OMAP2_H +#define _MTD_NAND_OMAP2_H + #include <linux/mtd/partitions.h> +#define GPMC_BCH_NUM_REMAINDER 8 + enum nand_io { NAND_OMAP_PREFETCH_POLLED = 0, /* prefetch polled mode, default */ NAND_OMAP_POLLED, /* polled mode, without prefetch */ @@ -18,10 +22,38 @@ enum nand_io { NAND_OMAP_PREFETCH_IRQ /* prefetch enabled irq mode */ }; +enum omap_ecc { + /* 1-bit ecc: stored at end of spare area */ + OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */ + OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */ + /* 1-bit ecc: stored at beginning of spare area as romcode */ + OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */ + OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */ + OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */ +}; + +struct gpmc_nand_regs { + void __iomem *gpmc_status; + void __iomem *gpmc_nand_command; + void __iomem *gpmc_nand_address; + void __iomem *gpmc_nand_data; + void __iomem *gpmc_prefetch_config1; + void __iomem *gpmc_prefetch_config2; + void __iomem *gpmc_prefetch_control; + void __iomem *gpmc_prefetch_status; + void __iomem *gpmc_ecc_config; + void __iomem *gpmc_ecc_control; + void __iomem *gpmc_ecc_size_config; + void __iomem *gpmc_ecc1_result; + void __iomem *gpmc_bch_result0[GPMC_BCH_NUM_REMAINDER]; + void __iomem *gpmc_bch_result1[GPMC_BCH_NUM_REMAINDER]; + void __iomem *gpmc_bch_result2[GPMC_BCH_NUM_REMAINDER]; + void __iomem *gpmc_bch_result3[GPMC_BCH_NUM_REMAINDER]; +}; + struct omap_nand_platform_data { int cs; struct mtd_partition *parts; - struct gpmc_timings *gpmc_t; int nr_parts; bool dev_ready; enum nand_io xfer_type; @@ -30,14 +62,4 @@ struct omap_nand_platform_data { struct gpmc_nand_regs reg; }; -/* minimum size for IO mapping */ -#define NAND_IO_SIZE 4 - -#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) -extern int gpmc_nand_init(struct omap_nand_platform_data *d); -#else -static inline int gpmc_nand_init(struct omap_nand_platform_data *d) -{ - return 0; -} #endif diff --git a/include/linux/platform_data/mtd-nomadik-nand.h b/include/linux/platform_data/mtd-nomadik-nand.h deleted file mode 100644 index c3c8254c22a5..000000000000 --- a/include/linux/platform_data/mtd-nomadik-nand.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __ASM_ARCH_NAND_H -#define __ASM_ARCH_NAND_H - -struct nomadik_nand_platform_data { - struct mtd_partition *parts; - int nparts; - int options; - int (*init) (void); - int (*exit) (void); -}; - -#define NAND_IO_DATA 0x40000000 -#define NAND_IO_CMD 0x40800000 -#define NAND_IO_ADDR 0x41000000 - -#endif /* __ASM_ARCH_NAND_H */ diff --git a/include/linux/platform_data/mtd-onenand-omap2.h b/include/linux/platform_data/mtd-onenand-omap2.h index 2858667d2e4f..685af7e8b120 100644 --- a/include/linux/platform_data/mtd-onenand-omap2.h +++ b/include/linux/platform_data/mtd-onenand-omap2.h @@ -9,17 +9,15 @@ * published by the Free Software Foundation. */ +#ifndef __MTD_ONENAND_OMAP2_H +#define __MTD_ONENAND_OMAP2_H + #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #define ONENAND_SYNC_READ (1 << 0) #define ONENAND_SYNC_READWRITE (1 << 1) - -struct onenand_freq_info { - u16 maf_id; - u16 dev_id; - u16 ver_id; -}; +#define ONENAND_IN_OMAP34XX (1 << 2) struct omap_onenand_platform_data { int cs; @@ -27,27 +25,9 @@ struct omap_onenand_platform_data { struct mtd_partition *parts; int nr_parts; int (*onenand_setup)(void __iomem *, int *freq_ptr); - int (*get_freq)(const struct onenand_freq_info *freq_info, - bool *clk_dep); int dma_channel; u8 flags; u8 regulator_can_sleep; u8 skip_initial_unlocking; }; - -#define ONENAND_MAX_PARTITIONS 8 - -#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ - defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) - -extern void gpmc_onenand_init(struct omap_onenand_platform_data *d); - -#else - -#define board_onenand_data NULL - -static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d) -{ -} - #endif diff --git a/include/linux/platform_data/omap-twl4030.h b/include/linux/platform_data/omap-twl4030.h index c7bef788daab..ee60ef79d792 100644 --- a/include/linux/platform_data/omap-twl4030.h +++ b/include/linux/platform_data/omap-twl4030.h @@ -25,8 +25,34 @@ #ifndef _OMAP_TWL4030_H_ #define _OMAP_TWL4030_H_ +/* To select if only one channel is connected in a stereo port */ +#define OMAP_TWL4030_LEFT (1 << 0) +#define OMAP_TWL4030_RIGHT (1 << 1) + struct omap_tw4030_pdata { const char *card_name; + /* Voice port is connected to McBSP3 */ + bool voice_connected; + + /* The driver will parse the connection flags if this flag is set */ + bool custom_routing; + /* Flags to indicate connected audio ports. */ + u8 has_hs; + u8 has_hf; + u8 has_predriv; + u8 has_carkit; + bool has_ear; + + bool has_mainmic; + bool has_submic; + bool has_hsmic; + bool has_carkitmic; + bool has_digimic0; + bool has_digimic1; + u8 has_linein; + + /* Jack detect GPIO or <= 0 if it is not implemented */ + int jack_detect; }; #endif /* _OMAP_TWL4030_H_ */ diff --git a/include/linux/platform_data/omap-wd-timer.h b/include/linux/platform_data/omap-wd-timer.h new file mode 100644 index 000000000000..d75f5f802d98 --- /dev/null +++ b/include/linux/platform_data/omap-wd-timer.h @@ -0,0 +1,38 @@ +/* + * OMAP2+ WDTIMER-specific function prototypes + * + * Copyright (C) 2012 Texas Instruments, Inc. + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __LINUX_PLATFORM_DATA_OMAP_WD_TIMER_H +#define __LINUX_PLATFORM_DATA_OMAP_WD_TIMER_H + +#include <linux/types.h> + +/* + * Standardized OMAP reset source bits + * + * This is a subset of the ones listed in arch/arm/mach-omap2/prm.h + * and are the only ones needed in the watchdog driver. + */ +#define OMAP_MPU_WD_RST_SRC_ID_SHIFT 3 + +/** + * struct omap_wd_timer_platform_data - WDTIMER integration to the host SoC + * @read_reset_sources - fn ptr for the SoC to indicate the last reset cause + * + * The function pointed to by @read_reset_sources must return its data + * in a standard format - search for RST_SRC_ID_SHIFT in + * arch/arm/mach-omap2 + */ +struct omap_wd_timer_platform_data { + u32 (*read_reset_sources)(void); +}; + +#endif diff --git a/include/linux/platform_data/omap_drm.h b/include/linux/platform_data/omap_drm.h index 3da73bdc2031..f4e4a237ebd2 100644 --- a/include/linux/platform_data/omap_drm.h +++ b/include/linux/platform_data/omap_drm.h @@ -46,6 +46,7 @@ struct omap_kms_platform_data { }; struct omap_drm_platform_data { + uint32_t omaprev; struct omap_kms_platform_data *kms_pdata; }; diff --git a/include/linux/platform_data/omap_ocp2scp.h b/include/linux/platform_data/omap_ocp2scp.h new file mode 100644 index 000000000000..5c6c3939355f --- /dev/null +++ b/include/linux/platform_data/omap_ocp2scp.h @@ -0,0 +1,31 @@ +/* + * omap_ocp2scp.h -- ocp2scp header file + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Author: Kishon Vijay Abraham I <kishon@ti.com> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __DRIVERS_OMAP_OCP2SCP_H +#define __DRIVERS_OMAP_OCP2SCP_H + +struct omap_ocp2scp_dev { + const char *drv_name; + struct resource *res; +}; + +struct omap_ocp2scp_platform_data { + int dev_cnt; + struct omap_ocp2scp_dev **devices; +}; +#endif /* __DRIVERS_OMAP_OCP2SCP_H */ diff --git a/include/linux/platform_data/pinctrl-coh901.h b/include/linux/platform_data/pinctrl-coh901.h index 30dea251b835..dfbc65d10484 100644 --- a/include/linux/platform_data/pinctrl-coh901.h +++ b/include/linux/platform_data/pinctrl-coh901.h @@ -13,14 +13,10 @@ * struct u300_gpio_platform - U300 GPIO platform data * @ports: number of GPIO block ports * @gpio_base: first GPIO number for this block (use a free range) - * @gpio_irq_base: first GPIO IRQ number for this block (use a free range) - * @pinctrl_device: pin control device to spawn as child */ struct u300_gpio_platform { u8 ports; int gpio_base; - int gpio_irq_base; - struct platform_device *pinctrl_device; }; #endif /* __MACH_U300_GPIO_U300_H */ diff --git a/include/linux/platform_data/pinctrl-nomadik.h b/include/linux/platform_data/pinctrl-nomadik.h new file mode 100644 index 000000000000..f73b2f0c55b7 --- /dev/null +++ b/include/linux/platform_data/pinctrl-nomadik.h @@ -0,0 +1,266 @@ +/* + * Structures and registers for GPIO access in the Nomadik SoC + * + * Copyright (C) 2008 STMicroelectronics + * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com> + * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __PLAT_NOMADIK_GPIO +#define __PLAT_NOMADIK_GPIO + +/* + * pin configurations are represented by 32-bit integers: + * + * bit 0.. 8 - Pin Number (512 Pins Maximum) + * bit 9..10 - Alternate Function Selection + * bit 11..12 - Pull up/down state + * bit 13 - Sleep mode behaviour + * bit 14 - Direction + * bit 15 - Value (if output) + * bit 16..18 - SLPM pull up/down state + * bit 19..20 - SLPM direction + * bit 21..22 - SLPM Value (if output) + * bit 23..25 - PDIS value (if input) + * bit 26 - Gpio mode + * bit 27 - Sleep mode + * + * to facilitate the definition, the following macros are provided + * + * PIN_CFG_DEFAULT - default config (0): + * pull up/down = disabled + * sleep mode = input/wakeup + * direction = input + * value = low + * SLPM direction = same as normal + * SLPM pull = same as normal + * SLPM value = same as normal + * + * PIN_CFG - default config with alternate function + */ + +typedef unsigned long pin_cfg_t; + +#define PIN_NUM_MASK 0x1ff +#define PIN_NUM(x) ((x) & PIN_NUM_MASK) + +#define PIN_ALT_SHIFT 9 +#define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT) +#define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT) +#define PIN_GPIO (NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT) +#define PIN_ALT_A (NMK_GPIO_ALT_A << PIN_ALT_SHIFT) +#define PIN_ALT_B (NMK_GPIO_ALT_B << PIN_ALT_SHIFT) +#define PIN_ALT_C (NMK_GPIO_ALT_C << PIN_ALT_SHIFT) + +#define PIN_PULL_SHIFT 11 +#define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT) +#define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT) +#define PIN_PULL_NONE (NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT) +#define PIN_PULL_UP (NMK_GPIO_PULL_UP << PIN_PULL_SHIFT) +#define PIN_PULL_DOWN (NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT) + +#define PIN_SLPM_SHIFT 13 +#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT) +#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT) +#define PIN_SLPM_MAKE_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT) +#define PIN_SLPM_NOCHANGE (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT) +/* These two replace the above in DB8500v2+ */ +#define PIN_SLPM_WAKEUP_ENABLE (NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT) +#define PIN_SLPM_WAKEUP_DISABLE (NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT) +#define PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP PIN_SLPM_WAKEUP_DISABLE + +#define PIN_SLPM_GPIO PIN_SLPM_WAKEUP_ENABLE /* In SLPM, pin is a gpio */ +#define PIN_SLPM_ALTFUNC PIN_SLPM_WAKEUP_DISABLE /* In SLPM, pin is altfunc */ + +#define PIN_DIR_SHIFT 14 +#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT) +#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT) +#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT) +#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT) + +#define PIN_VAL_SHIFT 15 +#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT) +#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT) +#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT) +#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT) + +#define PIN_SLPM_PULL_SHIFT 16 +#define PIN_SLPM_PULL_MASK (0x7 << PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL(x) \ + (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL_NONE \ + ((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL_UP \ + ((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL_DOWN \ + ((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT) + +#define PIN_SLPM_DIR_SHIFT 19 +#define PIN_SLPM_DIR_MASK (0x3 << PIN_SLPM_DIR_SHIFT) +#define PIN_SLPM_DIR(x) \ + (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT) +#define PIN_SLPM_DIR_INPUT ((1 + 0) << PIN_SLPM_DIR_SHIFT) +#define PIN_SLPM_DIR_OUTPUT ((1 + 1) << PIN_SLPM_DIR_SHIFT) + +#define PIN_SLPM_VAL_SHIFT 21 +#define PIN_SLPM_VAL_MASK (0x3 << PIN_SLPM_VAL_SHIFT) +#define PIN_SLPM_VAL(x) \ + (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT) +#define PIN_SLPM_VAL_LOW ((1 + 0) << PIN_SLPM_VAL_SHIFT) +#define PIN_SLPM_VAL_HIGH ((1 + 1) << PIN_SLPM_VAL_SHIFT) + +#define PIN_SLPM_PDIS_SHIFT 23 +#define PIN_SLPM_PDIS_MASK (0x3 << PIN_SLPM_PDIS_SHIFT) +#define PIN_SLPM_PDIS(x) \ + (((x) & PIN_SLPM_PDIS_MASK) >> PIN_SLPM_PDIS_SHIFT) +#define PIN_SLPM_PDIS_NO_CHANGE (0 << PIN_SLPM_PDIS_SHIFT) +#define PIN_SLPM_PDIS_DISABLED (1 << PIN_SLPM_PDIS_SHIFT) +#define PIN_SLPM_PDIS_ENABLED (2 << PIN_SLPM_PDIS_SHIFT) + +#define PIN_LOWEMI_SHIFT 25 +#define PIN_LOWEMI_MASK (0x1 << PIN_LOWEMI_SHIFT) +#define PIN_LOWEMI(x) (((x) & PIN_LOWEMI_MASK) >> PIN_LOWEMI_SHIFT) +#define PIN_LOWEMI_DISABLED (0 << PIN_LOWEMI_SHIFT) +#define PIN_LOWEMI_ENABLED (1 << PIN_LOWEMI_SHIFT) + +#define PIN_GPIOMODE_SHIFT 26 +#define PIN_GPIOMODE_MASK (0x1 << PIN_GPIOMODE_SHIFT) +#define PIN_GPIOMODE(x) (((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT) +#define PIN_GPIOMODE_DISABLED (0 << PIN_GPIOMODE_SHIFT) +#define PIN_GPIOMODE_ENABLED (1 << PIN_GPIOMODE_SHIFT) + +#define PIN_SLEEPMODE_SHIFT 27 +#define PIN_SLEEPMODE_MASK (0x1 << PIN_SLEEPMODE_SHIFT) +#define PIN_SLEEPMODE(x) (((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT) +#define PIN_SLEEPMODE_DISABLED (0 << PIN_SLEEPMODE_SHIFT) +#define PIN_SLEEPMODE_ENABLED (1 << PIN_SLEEPMODE_SHIFT) + + +/* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */ +#define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN) +#define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP) +#define PIN_INPUT_NOPULL (PIN_DIR_INPUT | PIN_PULL_NONE) +#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW) +#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH) + +#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN) +#define PIN_SLPM_INPUT_PULLUP (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP) +#define PIN_SLPM_INPUT_NOPULL (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE) +#define PIN_SLPM_OUTPUT_LOW (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW) +#define PIN_SLPM_OUTPUT_HIGH (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH) + +#define PIN_CFG_DEFAULT (0) + +#define PIN_CFG(num, alt) \ + (PIN_CFG_DEFAULT |\ + (PIN_NUM(num) | PIN_##alt)) + +#define PIN_CFG_INPUT(num, alt, pull) \ + (PIN_CFG_DEFAULT |\ + (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull)) + +#define PIN_CFG_OUTPUT(num, alt, val) \ + (PIN_CFG_DEFAULT |\ + (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val)) + +/* + * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving + * the "gpio" namespace for generic and cross-machine functions + */ + +#define GPIO_BLOCK_SHIFT 5 +#define NMK_GPIO_PER_CHIP (1 << GPIO_BLOCK_SHIFT) + +/* Register in the logic block */ +#define NMK_GPIO_DAT 0x00 +#define NMK_GPIO_DATS 0x04 +#define NMK_GPIO_DATC 0x08 +#define NMK_GPIO_PDIS 0x0c +#define NMK_GPIO_DIR 0x10 +#define NMK_GPIO_DIRS 0x14 +#define NMK_GPIO_DIRC 0x18 +#define NMK_GPIO_SLPC 0x1c +#define NMK_GPIO_AFSLA 0x20 +#define NMK_GPIO_AFSLB 0x24 +#define NMK_GPIO_LOWEMI 0x28 + +#define NMK_GPIO_RIMSC 0x40 +#define NMK_GPIO_FIMSC 0x44 +#define NMK_GPIO_IS 0x48 +#define NMK_GPIO_IC 0x4c +#define NMK_GPIO_RWIMSC 0x50 +#define NMK_GPIO_FWIMSC 0x54 +#define NMK_GPIO_WKS 0x58 +/* These appear in DB8540 and later ASICs */ +#define NMK_GPIO_EDGELEVEL 0x5C +#define NMK_GPIO_LEVEL 0x60 + +/* Alternate functions: function C is set in hw by setting both A and B */ +#define NMK_GPIO_ALT_GPIO 0 +#define NMK_GPIO_ALT_A 1 +#define NMK_GPIO_ALT_B 2 +#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B) + +#define NMK_GPIO_ALT_CX_SHIFT 2 +#define NMK_GPIO_ALT_C1 ((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) +#define NMK_GPIO_ALT_C2 ((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) +#define NMK_GPIO_ALT_C3 ((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) +#define NMK_GPIO_ALT_C4 ((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) + +/* Pull up/down values */ +enum nmk_gpio_pull { + NMK_GPIO_PULL_NONE, + NMK_GPIO_PULL_UP, + NMK_GPIO_PULL_DOWN, +}; + +/* Sleep mode */ +enum nmk_gpio_slpm { + NMK_GPIO_SLPM_INPUT, + NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT, + NMK_GPIO_SLPM_NOCHANGE, + NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE, +}; + +/* Older deprecated pin config API that should go away soon */ +extern int nmk_config_pin(pin_cfg_t cfg, bool sleep); +extern int nmk_config_pins(pin_cfg_t *cfgs, int num); +extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num); +extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode); +extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull); +#ifdef CONFIG_PINCTRL_NOMADIK +extern int nmk_gpio_set_mode(int gpio, int gpio_mode); +#else +static inline int nmk_gpio_set_mode(int gpio, int gpio_mode) +{ + return -ENODEV; +} +#endif +extern int nmk_gpio_get_mode(int gpio); + +extern void nmk_gpio_wakeups_suspend(void); +extern void nmk_gpio_wakeups_resume(void); + +extern void nmk_gpio_clocks_enable(void); +extern void nmk_gpio_clocks_disable(void); + +extern void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up); + +/* + * Platform data to register a block: only the initial gpio/irq number. + */ +struct nmk_gpio_platform_data { + char *name; + int first_gpio; + int first_irq; + int num_gpio; + u32 (*get_secondary_status)(unsigned int bank); + void (*set_ioforce)(bool enable); + bool supports_sleepmode; +}; + +#endif /* __PLAT_NOMADIK_GPIO */ diff --git a/include/linux/platform_data/pn544.h b/include/linux/platform_data/pn544.h new file mode 100644 index 000000000000..713bfd703342 --- /dev/null +++ b/include/linux/platform_data/pn544.h @@ -0,0 +1,44 @@ +/* + * Driver include for the PN544 NFC chip. + * + * Copyright (C) Nokia Corporation + * + * Author: Jari Vanhala <ext-jari.vanhala@nokia.com> + * Contact: Matti Aaltoenn <matti.j.aaltonen@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _PN544_H_ +#define _PN544_H_ + +#include <linux/i2c.h> + +enum { + NFC_GPIO_ENABLE, + NFC_GPIO_FW_RESET, + NFC_GPIO_IRQ +}; + +/* board config */ +struct pn544_nfc_platform_data { + int (*request_resources) (struct i2c_client *client); + void (*free_resources) (void); + void (*enable) (int fw); + int (*test) (void); + void (*disable) (void); + int (*get_gpio)(int type); +}; + +#endif /* _PN544_H_ */ diff --git a/include/linux/platform_data/pxa2xx_udc.h b/include/linux/platform_data/pxa2xx_udc.h new file mode 100644 index 000000000000..c6c5e98b5b82 --- /dev/null +++ b/include/linux/platform_data/pxa2xx_udc.h @@ -0,0 +1,27 @@ +/* + * This supports machine-specific differences in how the PXA2xx + * USB Device Controller (UDC) is wired. + * + * It is set in linux/arch/arm/mach-pxa/<machine>.c or in + * linux/arch/mach-ixp4xx/<machine>.c and used in + * the probe routine of linux/drivers/usb/gadget/pxa2xx_udc.c + */ +#ifndef PXA2XX_UDC_H +#define PXA2XX_UDC_H + +struct pxa2xx_udc_mach_info { + int (*udc_is_connected)(void); /* do we see host? */ + void (*udc_command)(int cmd); +#define PXA2XX_UDC_CMD_CONNECT 0 /* let host see us */ +#define PXA2XX_UDC_CMD_DISCONNECT 1 /* so host won't see us */ + + /* Boards following the design guidelines in the developer's manual, + * with on-chip GPIOs not Lubbock's weird hardware, can have a sane + * VBUS IRQ and omit the methods above. Store the GPIO number + * here. Note that sometimes the signals go through inverters... + */ + bool gpio_pullup_inverted; + int gpio_pullup; /* high == pullup activated */ +}; + +#endif diff --git a/include/linux/platform_data/pxa_sdhci.h b/include/linux/platform_data/pxa_sdhci.h index 59acd987ed34..27d3156d093a 100644 --- a/include/linux/platform_data/pxa_sdhci.h +++ b/include/linux/platform_data/pxa_sdhci.h @@ -38,6 +38,7 @@ * @max_speed: the maximum speed supported * @host_caps: Standard MMC host capabilities bit field. * @quirks: quirks of platfrom + * @quirks2: quirks2 of platfrom * @pm_caps: pm_caps of platfrom */ struct sdhci_pxa_platdata { @@ -48,9 +49,10 @@ struct sdhci_pxa_platdata { unsigned int ext_cd_gpio; bool ext_cd_gpio_invert; unsigned int max_speed; - unsigned int host_caps; - unsigned int host_caps2; + u32 host_caps; + u32 host_caps2; unsigned int quirks; + unsigned int quirks2; unsigned int pm_caps; }; diff --git a/include/linux/platform_data/sa11x0-serial.h b/include/linux/platform_data/sa11x0-serial.h new file mode 100644 index 000000000000..4504d5d592f0 --- /dev/null +++ b/include/linux/platform_data/sa11x0-serial.h @@ -0,0 +1,33 @@ +/* + * Author: Nicolas Pitre + * + * Moved and changed lots, Russell King + * + * Low level machine dependent UART functions. + */ +#ifndef SA11X0_SERIAL_H +#define SA11X0_SERIAL_H + +struct uart_port; +struct uart_info; + +/* + * This is a temporary structure for registering these + * functions; it is intended to be discarded after boot. + */ +struct sa1100_port_fns { + void (*set_mctrl)(struct uart_port *, u_int); + u_int (*get_mctrl)(struct uart_port *); + void (*pm)(struct uart_port *, u_int, u_int); + int (*set_wake)(struct uart_port *, u_int); +}; + +#ifdef CONFIG_SERIAL_SA1100 +void sa1100_register_uart_fns(struct sa1100_port_fns *fns); +void sa1100_register_uart(int idx, int port); +#else +#define sa1100_register_uart_fns(fns) do { } while (0) +#define sa1100_register_uart(idx,port) do { } while (0) +#endif + +#endif diff --git a/include/linux/platform_data/serial-omap.h b/include/linux/platform_data/serial-omap.h new file mode 100644 index 000000000000..ff9b0aab5281 --- /dev/null +++ b/include/linux/platform_data/serial-omap.h @@ -0,0 +1,51 @@ +/* + * Driver for OMAP-UART controller. + * Based on drivers/serial/8250.c + * + * Copyright (C) 2010 Texas Instruments. + * + * Authors: + * Govindraj R <govindraj.raja@ti.com> + * Thara Gopinath <thara@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __OMAP_SERIAL_H__ +#define __OMAP_SERIAL_H__ + +#include <linux/serial_core.h> +#include <linux/device.h> +#include <linux/pm_qos.h> + +#define DRIVER_NAME "omap_uart" + +/* + * Use tty device name as ttyO, [O -> OMAP] + * in bootargs we specify as console=ttyO0 if uart1 + * is used as console uart. + */ +#define OMAP_SERIAL_NAME "ttyO" + +struct omap_uart_port_info { + bool dma_enabled; /* To specify DMA Mode */ + unsigned int uartclk; /* UART clock rate */ + upf_t flags; /* UPF_* flags */ + unsigned int dma_rx_buf_size; + unsigned int dma_rx_timeout; + unsigned int autosuspend_timeout; + unsigned int dma_rx_poll_rate; + int DTR_gpio; + int DTR_inverted; + int DTR_present; + + int (*get_context_loss_count)(struct device *); + void (*set_forceidle)(struct device *); + void (*set_noidle)(struct device *); + void (*enable_wakeup)(struct device *, bool); +}; + +#endif /* __OMAP_SERIAL_H__ */ diff --git a/include/linux/platform_data/spi-clps711x.h b/include/linux/platform_data/spi-clps711x.h new file mode 100644 index 000000000000..301956e63143 --- /dev/null +++ b/include/linux/platform_data/spi-clps711x.h @@ -0,0 +1,21 @@ +/* + * CLPS711X SPI bus driver definitions + * + * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef ____LINUX_PLATFORM_DATA_SPI_CLPS711X_H +#define ____LINUX_PLATFORM_DATA_SPI_CLPS711X_H + +/* Board specific platform_data */ +struct spi_clps711x_pdata { + int *chipselect; /* Array of GPIO-numbers */ + int num_chipselect; /* Total count of GPIOs */ +}; + +#endif diff --git a/include/linux/platform_data/spi-omap2-mcspi.h b/include/linux/platform_data/spi-omap2-mcspi.h index a357eb26bd25..a65572d53211 100644 --- a/include/linux/platform_data/spi-omap2-mcspi.h +++ b/include/linux/platform_data/spi-omap2-mcspi.h @@ -7,9 +7,13 @@ #define OMAP4_MCSPI_REG_OFFSET 0x100 +#define MCSPI_PINDIR_D0_IN_D1_OUT 0 +#define MCSPI_PINDIR_D0_OUT_D1_IN 1 + struct omap2_mcspi_platform_config { unsigned short num_cs; unsigned int regs_offset; + unsigned int pin_dir:1; }; struct omap2_mcspi_dev_attr { diff --git a/include/linux/platform_data/ti_am335x_adc.h b/include/linux/platform_data/ti_am335x_adc.h new file mode 100644 index 000000000000..e41d5834cb84 --- /dev/null +++ b/include/linux/platform_data/ti_am335x_adc.h @@ -0,0 +1,14 @@ +#ifndef __LINUX_TI_AM335X_ADC_H +#define __LINUX_TI_AM335X_ADC_H + +/** + * struct adc_data ADC Input information + * @adc_channels: Number of analog inputs + * available for ADC. + */ + +struct adc_data { + unsigned int adc_channels; +}; + +#endif diff --git a/include/linux/platform_data/uio_dmem_genirq.h b/include/linux/platform_data/uio_dmem_genirq.h new file mode 100644 index 000000000000..973c1bb32168 --- /dev/null +++ b/include/linux/platform_data/uio_dmem_genirq.h @@ -0,0 +1,26 @@ +/* + * include/linux/platform_data/uio_dmem_genirq.h + * + * Copyright (C) 2012 Damian Hobson-Garcia + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _UIO_DMEM_GENIRQ_H +#define _UIO_DMEM_GENIRQ_H + +#include <linux/uio_driver.h> + +struct uio_dmem_genirq_pdata { + struct uio_info uioinfo; + unsigned int *dynamic_region_sizes; + unsigned int num_dynamic_regions; +}; +#endif /* _UIO_DMEM_GENIRQ_H */ diff --git a/include/linux/platform_data/uio_pruss.h b/include/linux/platform_data/uio_pruss.h index f39140aabc6f..3d47d219827f 100644 --- a/include/linux/platform_data/uio_pruss.h +++ b/include/linux/platform_data/uio_pruss.h @@ -20,6 +20,7 @@ /* To configure the PRUSS INTC base offset for UIO driver */ struct uio_pruss_pdata { - u32 pintc_base; + u32 pintc_base; + struct gen_pool *sram_pool; }; #endif /* _UIO_PRUSS_H_ */ diff --git a/include/linux/platform_data/usb-omap.h b/include/linux/platform_data/usb-omap.h new file mode 100644 index 000000000000..ef65b67c56c3 --- /dev/null +++ b/include/linux/platform_data/usb-omap.h @@ -0,0 +1,83 @@ +/* + * usb-omap.h - Platform data for the various OMAP USB IPs + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * + * This software is distributed under the terms of the GNU General Public + * License ("GPL") version 2, as published by the Free Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#define OMAP3_HS_USB_PORTS 3 + +enum usbhs_omap_port_mode { + OMAP_USBHS_PORT_MODE_UNUSED, + OMAP_EHCI_PORT_MODE_PHY, + OMAP_EHCI_PORT_MODE_TLL, + OMAP_EHCI_PORT_MODE_HSIC, + OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0, + OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM, + OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0, + OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM, + OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0, + OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM, + OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0, + OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM, + OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0, + OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM +}; + +struct usbtll_omap_platform_data { + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; +}; + +struct ehci_hcd_omap_platform_data { + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; + int reset_gpio_port[OMAP3_HS_USB_PORTS]; + struct regulator *regulator[OMAP3_HS_USB_PORTS]; + unsigned phy_reset:1; +}; + +struct ohci_hcd_omap_platform_data { + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; + unsigned es2_compatibility:1; +}; + +struct usbhs_omap_platform_data { + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; + + struct ehci_hcd_omap_platform_data *ehci_data; + struct ohci_hcd_omap_platform_data *ohci_data; + + /* OMAP3 <= ES2.1 have a single ulpi bypass control bit */ + unsigned single_ulpi_bypass:1; +}; + +/*-------------------------------------------------------------------------*/ + +struct omap_musb_board_data { + u8 interface_type; + u8 mode; + u16 power; + unsigned extvbus:1; + void (*set_phy_power)(u8 on); + void (*clear_irq)(void); + void (*set_mode)(u8 mode); + void (*reset)(void); +}; + +enum musb_interface { + MUSB_INTERFACE_ULPI, + MUSB_INTERFACE_UTMI +}; diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h index 5711e9525a2a..a9ded9a3c175 100644 --- a/include/linux/platform_device.h +++ b/include/linux/platform_device.h @@ -55,6 +55,7 @@ extern int platform_add_devices(struct platform_device **, int); struct platform_device_info { struct device *parent; + struct acpi_dev_node acpi_node; const char *name; int id; diff --git a/include/linux/pm.h b/include/linux/pm.h index 007e687c4f69..03d7bb145311 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -546,10 +546,9 @@ struct dev_pm_info { unsigned long active_jiffies; unsigned long suspended_jiffies; unsigned long accounting_timestamp; - struct dev_pm_qos_request *pq_req; #endif struct pm_subsys_data *subsys_data; /* Owned by the subsystem. */ - struct pm_qos_constraints *constraints; + struct dev_pm_qos *qos; }; extern void update_pm_runtime_accounting(struct device *dev); diff --git a/include/linux/pm_qos.h b/include/linux/pm_qos.h index 9924ea1f22e0..5a95013905c8 100644 --- a/include/linux/pm_qos.h +++ b/include/linux/pm_qos.h @@ -20,6 +20,13 @@ enum { PM_QOS_NUM_CLASSES, }; +enum pm_qos_flags_status { + PM_QOS_FLAGS_UNDEFINED = -1, + PM_QOS_FLAGS_NONE, + PM_QOS_FLAGS_SOME, + PM_QOS_FLAGS_ALL, +}; + #define PM_QOS_DEFAULT_VALUE -1 #define PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE (2000 * USEC_PER_SEC) @@ -27,14 +34,31 @@ enum { #define PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE 0 #define PM_QOS_DEV_LAT_DEFAULT_VALUE 0 +#define PM_QOS_FLAG_NO_POWER_OFF (1 << 0) +#define PM_QOS_FLAG_REMOTE_WAKEUP (1 << 1) + struct pm_qos_request { struct plist_node node; int pm_qos_class; struct delayed_work work; /* for pm_qos_update_request_timeout */ }; +struct pm_qos_flags_request { + struct list_head node; + s32 flags; /* Do not change to 64 bit */ +}; + +enum dev_pm_qos_req_type { + DEV_PM_QOS_LATENCY = 1, + DEV_PM_QOS_FLAGS, +}; + struct dev_pm_qos_request { - struct plist_node node; + enum dev_pm_qos_req_type type; + union { + struct plist_node pnode; + struct pm_qos_flags_request flr; + } data; struct device *dev; }; @@ -45,8 +69,8 @@ enum pm_qos_type { }; /* - * Note: The lockless read path depends on the CPU accessing - * target_value atomically. Atomic access is only guaranteed on all CPU + * Note: The lockless read path depends on the CPU accessing target_value + * or effective_flags atomically. Atomic access is only guaranteed on all CPU * types linux supports for 32 bit quantites */ struct pm_qos_constraints { @@ -57,6 +81,18 @@ struct pm_qos_constraints { struct blocking_notifier_head *notifiers; }; +struct pm_qos_flags { + struct list_head list; + s32 effective_flags; /* Do not change to 64 bit */ +}; + +struct dev_pm_qos { + struct pm_qos_constraints latency; + struct pm_qos_flags flags; + struct dev_pm_qos_request *latency_req; + struct dev_pm_qos_request *flags_req; +}; + /* Action requested to pm_qos_update_target */ enum pm_qos_req_action { PM_QOS_ADD_REQ, /* Add a new request */ @@ -71,6 +107,9 @@ static inline int dev_pm_qos_request_active(struct dev_pm_qos_request *req) int pm_qos_update_target(struct pm_qos_constraints *c, struct plist_node *node, enum pm_qos_req_action action, int value); +bool pm_qos_update_flags(struct pm_qos_flags *pqf, + struct pm_qos_flags_request *req, + enum pm_qos_req_action action, s32 val); void pm_qos_add_request(struct pm_qos_request *req, int pm_qos_class, s32 value); void pm_qos_update_request(struct pm_qos_request *req, @@ -86,10 +125,12 @@ int pm_qos_request_active(struct pm_qos_request *req); s32 pm_qos_read_value(struct pm_qos_constraints *c); #ifdef CONFIG_PM +enum pm_qos_flags_status __dev_pm_qos_flags(struct device *dev, s32 mask); +enum pm_qos_flags_status dev_pm_qos_flags(struct device *dev, s32 mask); s32 __dev_pm_qos_read_value(struct device *dev); s32 dev_pm_qos_read_value(struct device *dev); int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req, - s32 value); + enum dev_pm_qos_req_type type, s32 value); int dev_pm_qos_update_request(struct dev_pm_qos_request *req, s32 new_value); int dev_pm_qos_remove_request(struct dev_pm_qos_request *req); int dev_pm_qos_add_notifier(struct device *dev, @@ -103,12 +144,19 @@ void dev_pm_qos_constraints_destroy(struct device *dev); int dev_pm_qos_add_ancestor_request(struct device *dev, struct dev_pm_qos_request *req, s32 value); #else +static inline enum pm_qos_flags_status __dev_pm_qos_flags(struct device *dev, + s32 mask) + { return PM_QOS_FLAGS_UNDEFINED; } +static inline enum pm_qos_flags_status dev_pm_qos_flags(struct device *dev, + s32 mask) + { return PM_QOS_FLAGS_UNDEFINED; } static inline s32 __dev_pm_qos_read_value(struct device *dev) { return 0; } static inline s32 dev_pm_qos_read_value(struct device *dev) { return 0; } static inline int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req, + enum dev_pm_qos_req_type type, s32 value) { return 0; } static inline int dev_pm_qos_update_request(struct dev_pm_qos_request *req, @@ -144,10 +192,31 @@ static inline int dev_pm_qos_add_ancestor_request(struct device *dev, #ifdef CONFIG_PM_RUNTIME int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value); void dev_pm_qos_hide_latency_limit(struct device *dev); +int dev_pm_qos_expose_flags(struct device *dev, s32 value); +void dev_pm_qos_hide_flags(struct device *dev); +int dev_pm_qos_update_flags(struct device *dev, s32 mask, bool set); + +static inline s32 dev_pm_qos_requested_latency(struct device *dev) +{ + return dev->power.qos->latency_req->data.pnode.prio; +} + +static inline s32 dev_pm_qos_requested_flags(struct device *dev) +{ + return dev->power.qos->flags_req->data.flr.flags; +} #else static inline int dev_pm_qos_expose_latency_limit(struct device *dev, s32 value) { return 0; } static inline void dev_pm_qos_hide_latency_limit(struct device *dev) {} +static inline int dev_pm_qos_expose_flags(struct device *dev, s32 value) + { return 0; } +static inline void dev_pm_qos_hide_flags(struct device *dev) {} +static inline int dev_pm_qos_update_flags(struct device *dev, s32 m, bool set) + { return 0; } + +static inline s32 dev_pm_qos_requested_latency(struct device *dev) { return 0; } +static inline s32 dev_pm_qos_requested_flags(struct device *dev) { return 0; } #endif #endif diff --git a/include/linux/power/bq2415x_charger.h b/include/linux/power/bq2415x_charger.h new file mode 100644 index 000000000000..97a1665eaeaf --- /dev/null +++ b/include/linux/power/bq2415x_charger.h @@ -0,0 +1,95 @@ +/* + * bq2415x charger driver + * + * Copyright (C) 2011-2012 Pali Rohár <pali.rohar@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef BQ2415X_CHARGER_H +#define BQ2415X_CHARGER_H + +/* + * This is platform data for bq2415x chip. It contains default board + * voltages and currents which can be also later configured via sysfs. If + * value is -1 then default chip value (specified in datasheet) will be + * used. + * + * Value resistor_sense is needed for for configuring charge and + * termination current. It it is less or equal to zero, configuring charge + * and termination current will not be possible. + * + * Function set_mode_hook is needed for automode (setting correct current + * limit when charger is connected/disconnected or setting boost mode). + * When is NULL, automode function is disabled. When is not NULL, it must + * have this prototype: + * + * int (*set_mode_hook)( + * void (*hook)(enum bq2415x_mode mode, void *data), + * void *data) + * + * hook is hook function (see below) and data is pointer to driver private + * data + * + * bq2415x driver will call it as: + * + * platform_data->set_mode_hook(bq2415x_hook_function, bq2415x_device); + * + * Board/platform function set_mode_hook return non zero value when hook + * function was successful registered. Platform code should call that hook + * function (which get from pointer, with data) every time when charger + * was connected/disconnected or require to enable boost mode. bq2415x + * driver then will set correct current limit, enable/disable charger or + * boost mode. + * + * Hook function has this prototype: + * + * void hook(enum bq2415x_mode mode, void *data); + * + * mode is bq2415x mode (charger or boost) + * data is pointer to driver private data (which get from + * set_charger_type_hook) + * + * When bq driver is being unloaded, it call function: + * + * platform_data->set_mode_hook(NULL, NULL); + * + * (hook function and driver private data are NULL) + * + * After that board/platform code must not call driver hook function! It + * is possible that pointer to hook function will not be valid and calling + * will cause undefined result. + */ + +/* Supported modes with maximal current limit */ +enum bq2415x_mode { + BQ2415X_MODE_NONE, /* unknown or no charger (100mA) */ + BQ2415X_MODE_HOST_CHARGER, /* usb host/hub charger (500mA) */ + BQ2415X_MODE_DEDICATED_CHARGER, /* dedicated charger (unlimited) */ + BQ2415X_MODE_BOOST, /* boost mode (charging disabled) */ +}; + +struct bq2415x_platform_data { + int current_limit; /* mA */ + int weak_battery_voltage; /* mV */ + int battery_regulation_voltage; /* mV */ + int charge_current; /* mA */ + int termination_current; /* mA */ + int resistor_sense; /* m ohm */ + int (*set_mode_hook)(void (*hook)(enum bq2415x_mode mode, void *data), + void *data); +}; + +#endif diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h index 4a496ebc7d73..c0f44c2b006d 100644 --- a/include/linux/power/smartreflex.h +++ b/include/linux/power/smartreflex.h @@ -260,8 +260,13 @@ struct omap_sr_nvalue_table { * * @name: instance name * @ip_type: Smartreflex IP type. - * @senp_mod: SENPENABLE value for the sr - * @senn_mod: SENNENABLE value for sr + * @senp_mod: SENPENABLE value of the sr CONFIG register + * @senn_mod: SENNENABLE value for sr CONFIG register + * @err_weight ERRWEIGHT value of the sr ERRCONFIG register + * @err_maxlimit ERRMAXLIMIT value of the sr ERRCONFIG register + * @accum_data ACCUMDATA value of the sr CONFIG register + * @senn_avgweight SENNAVGWEIGHT value of the sr AVGWEIGHT register + * @senp_avgweight SENPAVGWEIGHT value of the sr AVGWEIGHT register * @nvalue_count: Number of distinct nvalues in the nvalue table * @enable_on_init: whether this sr module needs to enabled at * boot up or not. @@ -274,6 +279,11 @@ struct omap_sr_data { int ip_type; u32 senp_mod; u32 senn_mod; + u32 err_weight; + u32 err_maxlimit; + u32 accum_data; + u32 senn_avgweight; + u32 senp_avgweight; int nvalue_count; bool enable_on_init; struct omap_sr_nvalue_table *nvalue_table; diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index e5ef45834c3c..1f0ab90aff00 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -114,6 +114,8 @@ enum power_supply_property { POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, + POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT, + POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX, POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN, POWER_SUPPLY_PROP_ENERGY_FULL, @@ -186,6 +188,7 @@ struct power_supply { struct work_struct changed_work; #ifdef CONFIG_THERMAL struct thermal_zone_device *tzd; + struct thermal_cooling_device *tcd; #endif #ifdef CONFIG_LEDS_TRIGGERS diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h index 3fd2e871ff1b..32676b35d2f5 100644 --- a/include/linux/proc_fs.h +++ b/include/linux/proc_fs.h @@ -28,7 +28,11 @@ struct mm_struct; */ enum { - PROC_ROOT_INO = 1, + PROC_ROOT_INO = 1, + PROC_IPC_INIT_INO = 0xEFFFFFFFU, + PROC_UTS_INIT_INO = 0xEFFFFFFEU, + PROC_USER_INIT_INO = 0xEFFFFFFDU, + PROC_PID_INIT_INO = 0xEFFFFFFCU, }; /* @@ -174,7 +178,10 @@ extern struct proc_dir_entry *proc_net_mkdir(struct net *net, const char *name, struct proc_dir_entry *parent); extern struct file *proc_ns_fget(int fd); +extern bool proc_ns_inode(struct inode *inode); +extern int proc_alloc_inum(unsigned int *pino); +extern void proc_free_inum(unsigned int inum); #else #define proc_net_fops_create(net, name, mode, fops) ({ (void)(mode), NULL; }) @@ -229,6 +236,19 @@ static inline struct file *proc_ns_fget(int fd) return ERR_PTR(-EINVAL); } +static inline bool proc_ns_inode(struct inode *inode) +{ + return false; +} + +static inline int proc_alloc_inum(unsigned int *inum) +{ + *inum = 1; + return 0; +} +static inline void proc_free_inum(unsigned int inum) +{ +} #endif /* CONFIG_PROC_FS */ #if !defined(CONFIG_PROC_KCORE) @@ -247,10 +267,14 @@ struct proc_ns_operations { void *(*get)(struct task_struct *task); void (*put)(void *ns); int (*install)(struct nsproxy *nsproxy, void *ns); + unsigned int (*inum)(void *ns); }; extern const struct proc_ns_operations netns_operations; extern const struct proc_ns_operations utsns_operations; extern const struct proc_ns_operations ipcns_operations; +extern const struct proc_ns_operations pidns_operations; +extern const struct proc_ns_operations userns_operations; +extern const struct proc_ns_operations mntns_operations; union proc_op { int (*proc_get_link)(struct dentry *, struct path *); @@ -290,4 +314,7 @@ static inline struct net *PDE_NET(struct proc_dir_entry *pde) return pde->parent->data; } +#include <linux/signal.h> + +void render_sigset_t(struct seq_file *m, const char *header, sigset_t *set); #endif /* _LINUX_PROC_FS_H */ diff --git a/include/linux/pstore.h b/include/linux/pstore.h index ee3034a40884..1788909d9a99 100644 --- a/include/linux/pstore.h +++ b/include/linux/pstore.h @@ -50,16 +50,18 @@ struct pstore_info { int (*open)(struct pstore_info *psi); int (*close)(struct pstore_info *psi); ssize_t (*read)(u64 *id, enum pstore_type_id *type, - struct timespec *time, char **buf, + int *count, struct timespec *time, char **buf, struct pstore_info *psi); int (*write)(enum pstore_type_id type, enum kmsg_dump_reason reason, u64 *id, - unsigned int part, size_t size, struct pstore_info *psi); + unsigned int part, int count, size_t size, + struct pstore_info *psi); int (*write_buf)(enum pstore_type_id type, enum kmsg_dump_reason reason, u64 *id, unsigned int part, const char *buf, size_t size, struct pstore_info *psi); int (*erase)(enum pstore_type_id type, u64 id, + int count, struct timespec time, struct pstore_info *psi); void *data; }; diff --git a/include/linux/ptp_clock_kernel.h b/include/linux/ptp_clock_kernel.h index f2dc6d8fc680..38a993508327 100644 --- a/include/linux/ptp_clock_kernel.h +++ b/include/linux/ptp_clock_kernel.h @@ -54,7 +54,8 @@ struct ptp_clock_request { * clock operations * * @adjfreq: Adjusts the frequency of the hardware clock. - * parameter delta: Desired period change in parts per billion. + * parameter delta: Desired frequency offset from nominal frequency + * in parts per billion * * @adjtime: Shifts the time of the hardware clock. * parameter delta: Desired change in nanoseconds. diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h index e0ff4689d35a..addfbe7c180e 100644 --- a/include/linux/ptrace.h +++ b/include/linux/ptrace.h @@ -32,6 +32,8 @@ #define PT_TRACE_EXIT PT_EVENT_FLAG(PTRACE_EVENT_EXIT) #define PT_TRACE_SECCOMP PT_EVENT_FLAG(PTRACE_EVENT_SECCOMP) +#define PT_EXITKILL (PTRACE_O_EXITKILL << PT_OPT_FLAG_SHIFT) + /* single stepping state bits (used on ARM and PA-RISC) */ #define PT_SINGLESTEP_BIT 31 #define PT_SINGLESTEP (1<<PT_SINGLESTEP_BIT) @@ -329,6 +331,19 @@ static inline void user_single_step_siginfo(struct task_struct *tsk, #define current_pt_regs() task_pt_regs(current) #endif +#ifndef ptrace_signal_deliver +#define ptrace_signal_deliver() ((void)0) +#endif + +/* + * unlike current_pt_regs(), this one is equal to task_pt_regs(current) + * on *all* architectures; the only reason to have a per-arch definition + * is optimisation. + */ +#ifndef signal_pt_regs +#define signal_pt_regs() task_pt_regs(current) +#endif + extern int task_current_syscall(struct task_struct *target, long *callno, unsigned long args[6], unsigned int maxargs, unsigned long *sp, unsigned long *pc); diff --git a/include/linux/pvclock_gtod.h b/include/linux/pvclock_gtod.h new file mode 100644 index 000000000000..0ca75825b60d --- /dev/null +++ b/include/linux/pvclock_gtod.h @@ -0,0 +1,9 @@ +#ifndef _PVCLOCK_GTOD_H +#define _PVCLOCK_GTOD_H + +#include <linux/notifier.h> + +extern int pvclock_gtod_register_notifier(struct notifier_block *nb); +extern int pvclock_gtod_unregister_notifier(struct notifier_block *nb); + +#endif /* _PVCLOCK_GTOD_H */ diff --git a/include/linux/pwm.h b/include/linux/pwm.h index 112b31436848..6d661f32e0e4 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -171,6 +171,9 @@ struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip, unsigned int index, const char *label); +struct pwm_device *of_pwm_xlate_with_flags(struct pwm_chip *pc, + const struct of_phandle_args *args); + struct pwm_device *pwm_get(struct device *dev, const char *consumer); void pwm_put(struct pwm_device *pwm); diff --git a/include/linux/raid/Kbuild b/include/linux/raid/Kbuild index 2415a64c5e51..e69de29bb2d1 100644 --- a/include/linux/raid/Kbuild +++ b/include/linux/raid/Kbuild @@ -1,2 +0,0 @@ -header-y += md_p.h -header-y += md_u.h diff --git a/include/linux/raid/md_p.h b/include/linux/raid/md_p.h deleted file mode 100644 index ee753536ab70..000000000000 --- a/include/linux/raid/md_p.h +++ /dev/null @@ -1,301 +0,0 @@ -/* - md_p.h : physical layout of Linux RAID devices - Copyright (C) 1996-98 Ingo Molnar, Gadi Oxman - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - You should have received a copy of the GNU General Public License - (for example /usr/src/linux/COPYING); if not, write to the Free - Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#ifndef _MD_P_H -#define _MD_P_H - -#include <linux/types.h> - -/* - * RAID superblock. - * - * The RAID superblock maintains some statistics on each RAID configuration. - * Each real device in the RAID set contains it near the end of the device. - * Some of the ideas are copied from the ext2fs implementation. - * - * We currently use 4096 bytes as follows: - * - * word offset function - * - * 0 - 31 Constant generic RAID device information. - * 32 - 63 Generic state information. - * 64 - 127 Personality specific information. - * 128 - 511 12 32-words descriptors of the disks in the raid set. - * 512 - 911 Reserved. - * 912 - 1023 Disk specific descriptor. - */ - -/* - * If x is the real device size in bytes, we return an apparent size of: - * - * y = (x & ~(MD_RESERVED_BYTES - 1)) - MD_RESERVED_BYTES - * - * and place the 4kB superblock at offset y. - */ -#define MD_RESERVED_BYTES (64 * 1024) -#define MD_RESERVED_SECTORS (MD_RESERVED_BYTES / 512) - -#define MD_NEW_SIZE_SECTORS(x) ((x & ~(MD_RESERVED_SECTORS - 1)) - MD_RESERVED_SECTORS) - -#define MD_SB_BYTES 4096 -#define MD_SB_WORDS (MD_SB_BYTES / 4) -#define MD_SB_SECTORS (MD_SB_BYTES / 512) - -/* - * The following are counted in 32-bit words - */ -#define MD_SB_GENERIC_OFFSET 0 -#define MD_SB_PERSONALITY_OFFSET 64 -#define MD_SB_DISKS_OFFSET 128 -#define MD_SB_DESCRIPTOR_OFFSET 992 - -#define MD_SB_GENERIC_CONSTANT_WORDS 32 -#define MD_SB_GENERIC_STATE_WORDS 32 -#define MD_SB_GENERIC_WORDS (MD_SB_GENERIC_CONSTANT_WORDS + MD_SB_GENERIC_STATE_WORDS) -#define MD_SB_PERSONALITY_WORDS 64 -#define MD_SB_DESCRIPTOR_WORDS 32 -#define MD_SB_DISKS 27 -#define MD_SB_DISKS_WORDS (MD_SB_DISKS*MD_SB_DESCRIPTOR_WORDS) -#define MD_SB_RESERVED_WORDS (1024 - MD_SB_GENERIC_WORDS - MD_SB_PERSONALITY_WORDS - MD_SB_DISKS_WORDS - MD_SB_DESCRIPTOR_WORDS) -#define MD_SB_EQUAL_WORDS (MD_SB_GENERIC_WORDS + MD_SB_PERSONALITY_WORDS + MD_SB_DISKS_WORDS) - -/* - * Device "operational" state bits - */ -#define MD_DISK_FAULTY 0 /* disk is faulty / operational */ -#define MD_DISK_ACTIVE 1 /* disk is running or spare disk */ -#define MD_DISK_SYNC 2 /* disk is in sync with the raid set */ -#define MD_DISK_REMOVED 3 /* disk is in sync with the raid set */ - -#define MD_DISK_WRITEMOSTLY 9 /* disk is "write-mostly" is RAID1 config. - * read requests will only be sent here in - * dire need - */ - -typedef struct mdp_device_descriptor_s { - __u32 number; /* 0 Device number in the entire set */ - __u32 major; /* 1 Device major number */ - __u32 minor; /* 2 Device minor number */ - __u32 raid_disk; /* 3 The role of the device in the raid set */ - __u32 state; /* 4 Operational state */ - __u32 reserved[MD_SB_DESCRIPTOR_WORDS - 5]; -} mdp_disk_t; - -#define MD_SB_MAGIC 0xa92b4efc - -/* - * Superblock state bits - */ -#define MD_SB_CLEAN 0 -#define MD_SB_ERRORS 1 - -#define MD_SB_BITMAP_PRESENT 8 /* bitmap may be present nearby */ - -/* - * Notes: - * - if an array is being reshaped (restriped) in order to change the - * the number of active devices in the array, 'raid_disks' will be - * the larger of the old and new numbers. 'delta_disks' will - * be the "new - old". So if +ve, raid_disks is the new value, and - * "raid_disks-delta_disks" is the old. If -ve, raid_disks is the - * old value and "raid_disks+delta_disks" is the new (smaller) value. - */ - - -typedef struct mdp_superblock_s { - /* - * Constant generic information - */ - __u32 md_magic; /* 0 MD identifier */ - __u32 major_version; /* 1 major version to which the set conforms */ - __u32 minor_version; /* 2 minor version ... */ - __u32 patch_version; /* 3 patchlevel version ... */ - __u32 gvalid_words; /* 4 Number of used words in this section */ - __u32 set_uuid0; /* 5 Raid set identifier */ - __u32 ctime; /* 6 Creation time */ - __u32 level; /* 7 Raid personality */ - __u32 size; /* 8 Apparent size of each individual disk */ - __u32 nr_disks; /* 9 total disks in the raid set */ - __u32 raid_disks; /* 10 disks in a fully functional raid set */ - __u32 md_minor; /* 11 preferred MD minor device number */ - __u32 not_persistent; /* 12 does it have a persistent superblock */ - __u32 set_uuid1; /* 13 Raid set identifier #2 */ - __u32 set_uuid2; /* 14 Raid set identifier #3 */ - __u32 set_uuid3; /* 15 Raid set identifier #4 */ - __u32 gstate_creserved[MD_SB_GENERIC_CONSTANT_WORDS - 16]; - - /* - * Generic state information - */ - __u32 utime; /* 0 Superblock update time */ - __u32 state; /* 1 State bits (clean, ...) */ - __u32 active_disks; /* 2 Number of currently active disks */ - __u32 working_disks; /* 3 Number of working disks */ - __u32 failed_disks; /* 4 Number of failed disks */ - __u32 spare_disks; /* 5 Number of spare disks */ - __u32 sb_csum; /* 6 checksum of the whole superblock */ -#ifdef __BIG_ENDIAN - __u32 events_hi; /* 7 high-order of superblock update count */ - __u32 events_lo; /* 8 low-order of superblock update count */ - __u32 cp_events_hi; /* 9 high-order of checkpoint update count */ - __u32 cp_events_lo; /* 10 low-order of checkpoint update count */ -#else - __u32 events_lo; /* 7 low-order of superblock update count */ - __u32 events_hi; /* 8 high-order of superblock update count */ - __u32 cp_events_lo; /* 9 low-order of checkpoint update count */ - __u32 cp_events_hi; /* 10 high-order of checkpoint update count */ -#endif - __u32 recovery_cp; /* 11 recovery checkpoint sector count */ - /* There are only valid for minor_version > 90 */ - __u64 reshape_position; /* 12,13 next address in array-space for reshape */ - __u32 new_level; /* 14 new level we are reshaping to */ - __u32 delta_disks; /* 15 change in number of raid_disks */ - __u32 new_layout; /* 16 new layout */ - __u32 new_chunk; /* 17 new chunk size (bytes) */ - __u32 gstate_sreserved[MD_SB_GENERIC_STATE_WORDS - 18]; - - /* - * Personality information - */ - __u32 layout; /* 0 the array's physical layout */ - __u32 chunk_size; /* 1 chunk size in bytes */ - __u32 root_pv; /* 2 LV root PV */ - __u32 root_block; /* 3 LV root block */ - __u32 pstate_reserved[MD_SB_PERSONALITY_WORDS - 4]; - - /* - * Disks information - */ - mdp_disk_t disks[MD_SB_DISKS]; - - /* - * Reserved - */ - __u32 reserved[MD_SB_RESERVED_WORDS]; - - /* - * Active descriptor - */ - mdp_disk_t this_disk; - -} mdp_super_t; - -static inline __u64 md_event(mdp_super_t *sb) { - __u64 ev = sb->events_hi; - return (ev<<32)| sb->events_lo; -} - -#define MD_SUPERBLOCK_1_TIME_SEC_MASK ((1ULL<<40) - 1) - -/* - * The version-1 superblock : - * All numeric fields are little-endian. - * - * total size: 256 bytes plus 2 per device. - * 1K allows 384 devices. - */ -struct mdp_superblock_1 { - /* constant array information - 128 bytes */ - __le32 magic; /* MD_SB_MAGIC: 0xa92b4efc - little endian */ - __le32 major_version; /* 1 */ - __le32 feature_map; /* bit 0 set if 'bitmap_offset' is meaningful */ - __le32 pad0; /* always set to 0 when writing */ - - __u8 set_uuid[16]; /* user-space generated. */ - char set_name[32]; /* set and interpreted by user-space */ - - __le64 ctime; /* lo 40 bits are seconds, top 24 are microseconds or 0*/ - __le32 level; /* -4 (multipath), -1 (linear), 0,1,4,5 */ - __le32 layout; /* only for raid5 and raid10 currently */ - __le64 size; /* used size of component devices, in 512byte sectors */ - - __le32 chunksize; /* in 512byte sectors */ - __le32 raid_disks; - __le32 bitmap_offset; /* sectors after start of superblock that bitmap starts - * NOTE: signed, so bitmap can be before superblock - * only meaningful of feature_map[0] is set. - */ - - /* These are only valid with feature bit '4' */ - __le32 new_level; /* new level we are reshaping to */ - __le64 reshape_position; /* next address in array-space for reshape */ - __le32 delta_disks; /* change in number of raid_disks */ - __le32 new_layout; /* new layout */ - __le32 new_chunk; /* new chunk size (512byte sectors) */ - __le32 new_offset; /* signed number to add to data_offset in new - * layout. 0 == no-change. This can be - * different on each device in the array. - */ - - /* constant this-device information - 64 bytes */ - __le64 data_offset; /* sector start of data, often 0 */ - __le64 data_size; /* sectors in this device that can be used for data */ - __le64 super_offset; /* sector start of this superblock */ - __le64 recovery_offset;/* sectors before this offset (from data_offset) have been recovered */ - __le32 dev_number; /* permanent identifier of this device - not role in raid */ - __le32 cnt_corrected_read; /* number of read errors that were corrected by re-writing */ - __u8 device_uuid[16]; /* user-space setable, ignored by kernel */ - __u8 devflags; /* per-device flags. Only one defined...*/ -#define WriteMostly1 1 /* mask for writemostly flag in above */ - /* Bad block log. If there are any bad blocks the feature flag is set. - * If offset and size are non-zero, that space is reserved and available - */ - __u8 bblog_shift; /* shift from sectors to block size */ - __le16 bblog_size; /* number of sectors reserved for list */ - __le32 bblog_offset; /* sector offset from superblock to bblog, - * signed - not unsigned */ - - /* array state information - 64 bytes */ - __le64 utime; /* 40 bits second, 24 bits microseconds */ - __le64 events; /* incremented when superblock updated */ - __le64 resync_offset; /* data before this offset (from data_offset) known to be in sync */ - __le32 sb_csum; /* checksum up to devs[max_dev] */ - __le32 max_dev; /* size of devs[] array to consider */ - __u8 pad3[64-32]; /* set to 0 when writing */ - - /* device state information. Indexed by dev_number. - * 2 bytes per device - * Note there are no per-device state flags. State information is rolled - * into the 'roles' value. If a device is spare or faulty, then it doesn't - * have a meaningful role. - */ - __le16 dev_roles[0]; /* role in array, or 0xffff for a spare, or 0xfffe for faulty */ -}; - -/* feature_map bits */ -#define MD_FEATURE_BITMAP_OFFSET 1 -#define MD_FEATURE_RECOVERY_OFFSET 2 /* recovery_offset is present and - * must be honoured - */ -#define MD_FEATURE_RESHAPE_ACTIVE 4 -#define MD_FEATURE_BAD_BLOCKS 8 /* badblock list is not empty */ -#define MD_FEATURE_REPLACEMENT 16 /* This device is replacing an - * active device with same 'role'. - * 'recovery_offset' is also set. - */ -#define MD_FEATURE_RESHAPE_BACKWARDS 32 /* Reshape doesn't change number - * of devices, but is going - * backwards anyway. - */ -#define MD_FEATURE_NEW_OFFSET 64 /* new_offset must be honoured */ -#define MD_FEATURE_ALL (MD_FEATURE_BITMAP_OFFSET \ - |MD_FEATURE_RECOVERY_OFFSET \ - |MD_FEATURE_RESHAPE_ACTIVE \ - |MD_FEATURE_BAD_BLOCKS \ - |MD_FEATURE_REPLACEMENT \ - |MD_FEATURE_RESHAPE_BACKWARDS \ - |MD_FEATURE_NEW_OFFSET \ - ) - -#endif diff --git a/include/linux/raid/md_u.h b/include/linux/raid/md_u.h index fb1abb3367e9..358c04bfbe2a 100644 --- a/include/linux/raid/md_u.h +++ b/include/linux/raid/md_u.h @@ -11,149 +11,10 @@ (for example /usr/src/linux/COPYING); if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ - #ifndef _MD_U_H #define _MD_U_H -/* - * Different major versions are not compatible. - * Different minor versions are only downward compatible. - * Different patchlevel versions are downward and upward compatible. - */ -#define MD_MAJOR_VERSION 0 -#define MD_MINOR_VERSION 90 -/* - * MD_PATCHLEVEL_VERSION indicates kernel functionality. - * >=1 means different superblock formats are selectable using SET_ARRAY_INFO - * and major_version/minor_version accordingly - * >=2 means that Internal bitmaps are supported by setting MD_SB_BITMAP_PRESENT - * in the super status byte - * >=3 means that bitmap superblock version 4 is supported, which uses - * little-ending representation rather than host-endian - */ -#define MD_PATCHLEVEL_VERSION 3 - -/* ioctls */ - -/* status */ -#define RAID_VERSION _IOR (MD_MAJOR, 0x10, mdu_version_t) -#define GET_ARRAY_INFO _IOR (MD_MAJOR, 0x11, mdu_array_info_t) -#define GET_DISK_INFO _IOR (MD_MAJOR, 0x12, mdu_disk_info_t) -#define PRINT_RAID_DEBUG _IO (MD_MAJOR, 0x13) -#define RAID_AUTORUN _IO (MD_MAJOR, 0x14) -#define GET_BITMAP_FILE _IOR (MD_MAJOR, 0x15, mdu_bitmap_file_t) - -/* configuration */ -#define CLEAR_ARRAY _IO (MD_MAJOR, 0x20) -#define ADD_NEW_DISK _IOW (MD_MAJOR, 0x21, mdu_disk_info_t) -#define HOT_REMOVE_DISK _IO (MD_MAJOR, 0x22) -#define SET_ARRAY_INFO _IOW (MD_MAJOR, 0x23, mdu_array_info_t) -#define SET_DISK_INFO _IO (MD_MAJOR, 0x24) -#define WRITE_RAID_INFO _IO (MD_MAJOR, 0x25) -#define UNPROTECT_ARRAY _IO (MD_MAJOR, 0x26) -#define PROTECT_ARRAY _IO (MD_MAJOR, 0x27) -#define HOT_ADD_DISK _IO (MD_MAJOR, 0x28) -#define SET_DISK_FAULTY _IO (MD_MAJOR, 0x29) -#define HOT_GENERATE_ERROR _IO (MD_MAJOR, 0x2a) -#define SET_BITMAP_FILE _IOW (MD_MAJOR, 0x2b, int) +#include <uapi/linux/raid/md_u.h> -/* usage */ -#define RUN_ARRAY _IOW (MD_MAJOR, 0x30, mdu_param_t) -/* 0x31 was START_ARRAY */ -#define STOP_ARRAY _IO (MD_MAJOR, 0x32) -#define STOP_ARRAY_RO _IO (MD_MAJOR, 0x33) -#define RESTART_ARRAY_RW _IO (MD_MAJOR, 0x34) - -/* 63 partitions with the alternate major number (mdp) */ -#define MdpMinorShift 6 -#ifdef __KERNEL__ extern int mdp_major; -#endif - -typedef struct mdu_version_s { - int major; - int minor; - int patchlevel; -} mdu_version_t; - -typedef struct mdu_array_info_s { - /* - * Generic constant information - */ - int major_version; - int minor_version; - int patch_version; - int ctime; - int level; - int size; - int nr_disks; - int raid_disks; - int md_minor; - int not_persistent; - - /* - * Generic state information - */ - int utime; /* 0 Superblock update time */ - int state; /* 1 State bits (clean, ...) */ - int active_disks; /* 2 Number of currently active disks */ - int working_disks; /* 3 Number of working disks */ - int failed_disks; /* 4 Number of failed disks */ - int spare_disks; /* 5 Number of spare disks */ - - /* - * Personality information - */ - int layout; /* 0 the array's physical layout */ - int chunk_size; /* 1 chunk size in bytes */ - -} mdu_array_info_t; - -/* non-obvious values for 'level' */ -#define LEVEL_MULTIPATH (-4) -#define LEVEL_LINEAR (-1) -#define LEVEL_FAULTY (-5) - -/* we need a value for 'no level specified' and 0 - * means 'raid0', so we need something else. This is - * for internal use only - */ -#define LEVEL_NONE (-1000000) - -typedef struct mdu_disk_info_s { - /* - * configuration/status of one particular disk - */ - int number; - int major; - int minor; - int raid_disk; - int state; - -} mdu_disk_info_t; - -typedef struct mdu_start_info_s { - /* - * configuration/status of one particular disk - */ - int major; - int minor; - int raid_disk; - int state; - -} mdu_start_info_t; - -typedef struct mdu_bitmap_file_s -{ - char pathname[4096]; -} mdu_bitmap_file_t; - -typedef struct mdu_param_s -{ - int personality; /* 1,2,3,4 */ - int chunk_size; /* in bytes */ - int max_fault; /* unused for now */ -} mdu_param_t; - #endif - diff --git a/include/linux/raid/pq.h b/include/linux/raid/pq.h index 640c69ceec96..8dfaa2ce2e95 100644 --- a/include/linux/raid/pq.h +++ b/include/linux/raid/pq.h @@ -98,6 +98,9 @@ extern const struct raid6_calls raid6_altivec1; extern const struct raid6_calls raid6_altivec2; extern const struct raid6_calls raid6_altivec4; extern const struct raid6_calls raid6_altivec8; +extern const struct raid6_calls raid6_avx2x1; +extern const struct raid6_calls raid6_avx2x2; +extern const struct raid6_calls raid6_avx2x4; struct raid6_recov_calls { void (*data2)(int, size_t, int, int, void **); @@ -109,6 +112,7 @@ struct raid6_recov_calls { extern const struct raid6_recov_calls raid6_recov_intx1; extern const struct raid6_recov_calls raid6_recov_ssse3; +extern const struct raid6_recov_calls raid6_recov_avx2; /* Algorithm list */ extern const struct raid6_calls * const raid6_algos[]; diff --git a/include/linux/random.h b/include/linux/random.h index 6330ed47b38b..d9846088c2c5 100644 --- a/include/linux/random.h +++ b/include/linux/random.h @@ -25,10 +25,19 @@ extern const struct file_operations random_fops, urandom_fops; unsigned int get_random_int(void); unsigned long randomize_range(unsigned long start, unsigned long end, unsigned long len); -u32 random32(void); -void srandom32(u32 seed); +u32 prandom_u32(void); +void prandom_bytes(void *buf, int nbytes); +void prandom_seed(u32 seed); -u32 prandom32(struct rnd_state *); +/* + * These macros are preserved for backward compatibility and should be + * removed as soon as a transition is finished. + */ +#define random32() prandom_u32() +#define srandom32(seed) prandom_seed(seed) + +u32 prandom_u32_state(struct rnd_state *); +void prandom_bytes_state(struct rnd_state *state, void *buf, int nbytes); /* * Handle minimum values for seeds @@ -39,11 +48,11 @@ static inline u32 __seed(u32 x, u32 m) } /** - * prandom32_seed - set seed for prandom32(). + * prandom_seed_state - set seed for prandom_u32_state(). * @state: pointer to state structure to receive the seed. * @seed: arbitrary 64-bit value to use as a seed. */ -static inline void prandom32_seed(struct rnd_state *state, u64 seed) +static inline void prandom_seed_state(struct rnd_state *state, u64 seed) { u32 i = (seed >> 32) ^ (seed << 10) ^ seed; diff --git a/include/linux/ratelimit.h b/include/linux/ratelimit.h index e11ccb4cf48d..0a260d8a18bf 100644 --- a/include/linux/ratelimit.h +++ b/include/linux/ratelimit.h @@ -46,20 +46,17 @@ extern int ___ratelimit(struct ratelimit_state *rs, const char *func); #define WARN_ON_RATELIMIT(condition, state) \ WARN_ON((condition) && __ratelimit(state)) -#define __WARN_RATELIMIT(condition, state, format...) \ -({ \ - int rtn = 0; \ - if (unlikely(__ratelimit(state))) \ - rtn = WARN(condition, format); \ - rtn; \ -}) - -#define WARN_RATELIMIT(condition, format...) \ +#define WARN_RATELIMIT(condition, format, ...) \ ({ \ static DEFINE_RATELIMIT_STATE(_rs, \ DEFAULT_RATELIMIT_INTERVAL, \ DEFAULT_RATELIMIT_BURST); \ - __WARN_RATELIMIT(condition, &_rs, format); \ + int rtn = !!(condition); \ + \ + if (unlikely(rtn && __ratelimit(&_rs))) \ + WARN(rtn, format, ##__VA_ARGS__); \ + \ + rtn; \ }) #else @@ -67,15 +64,9 @@ extern int ___ratelimit(struct ratelimit_state *rs, const char *func); #define WARN_ON_RATELIMIT(condition, state) \ WARN_ON(condition) -#define __WARN_RATELIMIT(condition, state, format...) \ -({ \ - int rtn = WARN(condition, format); \ - rtn; \ -}) - -#define WARN_RATELIMIT(condition, format...) \ +#define WARN_RATELIMIT(condition, format, ...) \ ({ \ - int rtn = WARN(condition, format); \ + int rtn = WARN(condition, format, ##__VA_ARGS__); \ rtn; \ }) diff --git a/include/linux/rbtree_augmented.h b/include/linux/rbtree_augmented.h index 214caa33433b..2ac60c9cf644 100644 --- a/include/linux/rbtree_augmented.h +++ b/include/linux/rbtree_augmented.h @@ -24,6 +24,7 @@ #ifndef _LINUX_RBTREE_AUGMENTED_H #define _LINUX_RBTREE_AUGMENTED_H +#include <linux/compiler.h> #include <linux/rbtree.h> /* diff --git a/include/linux/rculist.h b/include/linux/rculist.h index e0f0fab20415..c92dd28eaa6c 100644 --- a/include/linux/rculist.h +++ b/include/linux/rculist.h @@ -286,23 +286,6 @@ static inline void list_splice_init_rcu(struct list_head *list, &pos->member != (head); \ pos = list_entry_rcu(pos->member.next, typeof(*pos), member)) - -/** - * list_for_each_continue_rcu - * @pos: the &struct list_head to use as a loop cursor. - * @head: the head for your list. - * - * Iterate over an rcu-protected list, continuing after current point. - * - * This list-traversal primitive may safely run concurrently with - * the _rcu list-mutation primitives such as list_add_rcu() - * as long as the traversal is guarded by rcu_read_lock(). - */ -#define list_for_each_continue_rcu(pos, head) \ - for ((pos) = rcu_dereference_raw(list_next_rcu(pos)); \ - (pos) != (head); \ - (pos) = rcu_dereference_raw(list_next_rcu(pos))) - /** * list_for_each_entry_continue_rcu - continue iteration over list of given type * @pos: the type * to use as a loop cursor. diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 7c968e4f929e..275aa3f1062d 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -90,6 +90,25 @@ extern void do_trace_rcu_torture_read(char *rcutorturename, * that started after call_rcu() was invoked. RCU read-side critical * sections are delimited by rcu_read_lock() and rcu_read_unlock(), * and may be nested. + * + * Note that all CPUs must agree that the grace period extended beyond + * all pre-existing RCU read-side critical section. On systems with more + * than one CPU, this means that when "func()" is invoked, each CPU is + * guaranteed to have executed a full memory barrier since the end of its + * last RCU read-side critical section whose beginning preceded the call + * to call_rcu(). It also means that each CPU executing an RCU read-side + * critical section that continues beyond the start of "func()" must have + * executed a memory barrier after the call_rcu() but before the beginning + * of that RCU read-side critical section. Note that these guarantees + * include CPUs that are offline, idle, or executing in user mode, as + * well as CPUs that are executing in the kernel. + * + * Furthermore, if CPU A invoked call_rcu() and CPU B invoked the + * resulting RCU callback function "func()", then both CPU A and CPU B are + * guaranteed to execute a full memory barrier during the time interval + * between the call to call_rcu() and the invocation of "func()" -- even + * if CPU A and CPU B are the same CPU (but again only if the system has + * more than one CPU). */ extern void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *head)); @@ -118,6 +137,9 @@ extern void call_rcu(struct rcu_head *head, * OR * - rcu_read_lock_bh() and rcu_read_unlock_bh(), if in process context. * These may be nested. + * + * See the description of call_rcu() for more detailed information on + * memory ordering guarantees. */ extern void call_rcu_bh(struct rcu_head *head, void (*func)(struct rcu_head *head)); @@ -137,6 +159,9 @@ extern void call_rcu_bh(struct rcu_head *head, * OR * anything that disables preemption. * These may be nested. + * + * See the description of call_rcu() for more detailed information on + * memory ordering guarantees. */ extern void call_rcu_sched(struct rcu_head *head, void (*func)(struct rcu_head *rcu)); @@ -197,13 +222,13 @@ extern void rcu_user_enter(void); extern void rcu_user_exit(void); extern void rcu_user_enter_after_irq(void); extern void rcu_user_exit_after_irq(void); -extern void rcu_user_hooks_switch(struct task_struct *prev, - struct task_struct *next); #else static inline void rcu_user_enter(void) { } static inline void rcu_user_exit(void) { } static inline void rcu_user_enter_after_irq(void) { } static inline void rcu_user_exit_after_irq(void) { } +static inline void rcu_user_hooks_switch(struct task_struct *prev, + struct task_struct *next) { } #endif /* CONFIG_RCU_USER_QS */ extern void exit_rcu(void); diff --git a/include/linux/regmap.h b/include/linux/regmap.h index e3bcc3f4dcb8..b7e95bf942c9 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -19,6 +19,7 @@ struct module; struct device; struct i2c_client; +struct irq_domain; struct spi_device; struct regmap; struct regmap_range_cfg; @@ -54,6 +55,39 @@ enum regmap_endian { }; /** + * A register range, used for access related checks + * (readable/writeable/volatile/precious checks) + * + * @range_min: address of first register + * @range_max: address of last register + */ +struct regmap_range { + unsigned int range_min; + unsigned int range_max; +}; + +/* + * A table of ranges including some yes ranges and some no ranges. + * If a register belongs to a no_range, the corresponding check function + * will return false. If a register belongs to a yes range, the corresponding + * check function will return true. "no_ranges" are searched first. + * + * @yes_ranges : pointer to an array of regmap ranges used as "yes ranges" + * @n_yes_ranges: size of the above array + * @no_ranges: pointer to an array of regmap ranges used as "no ranges" + * @n_no_ranges: size of the above array + */ +struct regmap_access_table { + const struct regmap_range *yes_ranges; + unsigned int n_yes_ranges; + const struct regmap_range *no_ranges; + unsigned int n_no_ranges; +}; + +typedef void (*regmap_lock)(void *); +typedef void (*regmap_unlock)(void *); + +/** * Configuration for the register map of a device. * * @name: Optional name of the regmap. Useful when a device has multiple @@ -67,16 +101,39 @@ enum regmap_endian { * @val_bits: Number of bits in a register value, mandatory. * * @writeable_reg: Optional callback returning true if the register - * can be written to. + * can be written to. If this field is NULL but wr_table + * (see below) is not, the check is performed on such table + * (a register is writeable if it belongs to one of the ranges + * specified by wr_table). * @readable_reg: Optional callback returning true if the register - * can be read from. + * can be read from. If this field is NULL but rd_table + * (see below) is not, the check is performed on such table + * (a register is readable if it belongs to one of the ranges + * specified by rd_table). * @volatile_reg: Optional callback returning true if the register - * value can't be cached. + * value can't be cached. If this field is NULL but + * volatile_table (see below) is not, the check is performed on + * such table (a register is volatile if it belongs to one of + * the ranges specified by volatile_table). * @precious_reg: Optional callback returning true if the rgister - * should not be read outside of a call from the driver - * (eg, a clear on read interrupt status register). + * should not be read outside of a call from the driver + * (eg, a clear on read interrupt status register). If this + * field is NULL but precious_table (see below) is not, the + * check is performed on such table (a register is precious if + * it belongs to one of the ranges specified by precious_table). + * @lock: Optional lock callback (overrides regmap's default lock + * function, based on spinlock or mutex). + * @unlock: As above for unlocking. + * @lock_arg: this field is passed as the only argument of lock/unlock + * functions (ignored in case regular lock/unlock functions + * are not overridden). * * @max_register: Optional, specifies the maximum valid register index. + * @wr_table: Optional, points to a struct regmap_access_table specifying + * valid ranges for write access. + * @rd_table: As above, for read access. + * @volatile_table: As above, for volatile registers. + * @precious_table: As above, for precious registers. * @reg_defaults: Power on reset values for registers (for use with * register cache support). * @num_reg_defaults: Number of elements in reg_defaults. @@ -116,8 +173,15 @@ struct regmap_config { bool (*readable_reg)(struct device *dev, unsigned int reg); bool (*volatile_reg)(struct device *dev, unsigned int reg); bool (*precious_reg)(struct device *dev, unsigned int reg); + regmap_lock lock; + regmap_unlock unlock; + void *lock_arg; unsigned int max_register; + const struct regmap_access_table *wr_table; + const struct regmap_access_table *rd_table; + const struct regmap_access_table *volatile_table; + const struct regmap_access_table *precious_table; const struct reg_default *reg_defaults; unsigned int num_reg_defaults; enum regcache_type cache_type; @@ -133,7 +197,7 @@ struct regmap_config { enum regmap_endian val_format_endian; const struct regmap_range_cfg *ranges; - unsigned int n_ranges; + unsigned int num_ranges; }; /** @@ -142,6 +206,8 @@ struct regmap_config { * 1. page selector register update; * 2. access through data window registers. * + * @name: Descriptive name for diagnostics + * * @range_min: Address of the lowest register address in virtual range. * @range_max: Address of the highest register in virtual range. * @@ -153,6 +219,8 @@ struct regmap_config { * @window_len: Number of registers in data window. */ struct regmap_range_cfg { + const char *name; + /* Registers of virtual address range */ unsigned int range_min; unsigned int range_max; @@ -181,7 +249,9 @@ typedef void (*regmap_hw_free_context)(void *context); * Description of a hardware bus for the register map infrastructure. * * @fast_io: Register IO is fast. Use a spinlock instead of a mutex - * to perform locking. + * to perform locking. This field is ignored if custom lock/unlock + * functions are used (see fields lock/unlock of + * struct regmap_config). * @write: Write operation. * @gather_write: Write operation with split register/value, return -ENOTSUPP * if not implemented on a given device. @@ -262,6 +332,16 @@ void regcache_mark_dirty(struct regmap *map); int regmap_register_patch(struct regmap *map, const struct reg_default *regs, int num_regs); +static inline bool regmap_reg_in_range(unsigned int reg, + const struct regmap_range *range) +{ + return reg >= range->range_min && reg <= range->range_max; +} + +bool regmap_reg_in_ranges(unsigned int reg, + const struct regmap_range *ranges, + unsigned int nranges); + /** * Description of an IRQ for the generic regmap irq_chip. * @@ -317,6 +397,7 @@ int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags, void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *data); int regmap_irq_chip_get_base(struct regmap_irq_chip_data *data); int regmap_irq_get_virq(struct regmap_irq_chip_data *data, int irq); +struct irq_domain *regmap_irq_get_domain(struct regmap_irq_chip_data *data); #else diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index c43cd3556b1f..7bc732ce6e50 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -160,6 +160,7 @@ int regulator_bulk_force_disable(int num_consumers, void regulator_bulk_free(int num_consumers, struct regulator_bulk_data *consumers); +int regulator_can_change_voltage(struct regulator *regulator); int regulator_count_voltages(struct regulator *regulator); int regulator_list_voltage(struct regulator *regulator, unsigned selector); int regulator_is_supported_voltage(struct regulator *regulator, @@ -358,6 +359,10 @@ static inline void regulator_set_drvdata(struct regulator *regulator, { } +static inline int regulator_count_voltages(struct regulator *regulator) +{ + return 0; +} #endif static inline int regulator_set_voltage_tol(struct regulator *regulator, @@ -367,4 +372,12 @@ static inline int regulator_set_voltage_tol(struct regulator *regulator, new_uV - tol_uV, new_uV + tol_uV); } +static inline int regulator_is_supported_voltage_tol(struct regulator *regulator, + int target_uV, int tol_uV) +{ + return regulator_is_supported_voltage(regulator, + target_uV - tol_uV, + target_uV + tol_uV); +} + #endif diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 7932a3bf21bd..d10bb0f39c5e 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -181,10 +181,13 @@ enum regulator_type { * @type: Indicates if the regulator is a voltage or current regulator. * @owner: Module providing the regulator, used for refcounting. * + * @continuous_voltage_range: Indicates if the regulator can set any + * voltage within constrains range. * @n_voltages: Number of selectors available for ops.list_voltage(). * * @min_uV: Voltage given by the lowest selector (if linear mapping) * @uV_step: Voltage increase with each selector (if linear mapping) + * @linear_min_sel: Minimal selector for starting linear mapping * @ramp_delay: Time to settle down after voltage change (unit: uV/us) * @volt_table: Voltage mapping table (if table based mapping) * @@ -199,6 +202,7 @@ struct regulator_desc { const char *name; const char *supply_name; int id; + bool continuous_voltage_range; unsigned n_voltages; struct regulator_ops *ops; int irq; @@ -207,6 +211,7 @@ struct regulator_desc { unsigned int min_uV; unsigned int uV_step; + unsigned int linear_min_sel; unsigned int ramp_delay; const unsigned int *volt_table; diff --git a/include/linux/regulator/max8973-regulator.h b/include/linux/regulator/max8973-regulator.h new file mode 100644 index 000000000000..f8acc052e353 --- /dev/null +++ b/include/linux/regulator/max8973-regulator.h @@ -0,0 +1,72 @@ +/* + * max8973-regulator.h -- MAXIM 8973 regulator + * + * Interface for regulator driver for MAXIM 8973 DC-DC step-down + * switching regulator. + * + * Copyright (C) 2012 NVIDIA Corporation + + * Author: Laxman Dewangan <ldewangan@nvidia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + */ + +#ifndef __LINUX_REGULATOR_MAX8973_H +#define __LINUX_REGULATOR_MAX8973_H + +/* + * Control flags for configuration of the device. + * Client need to pass this information with ORed + */ +#define MAX8973_CONTROL_REMOTE_SENSE_ENABLE 0x00000001 +#define MAX8973_CONTROL_FALLING_SLEW_RATE_ENABLE 0x00000002 +#define MAX8973_CONTROL_OUTPUT_ACTIVE_DISCH_ENABLE 0x00000004 +#define MAX8973_CONTROL_BIAS_ENABLE 0x00000008 +#define MAX8973_CONTROL_PULL_DOWN_ENABLE 0x00000010 +#define MAX8973_CONTROL_FREQ_SHIFT_9PER_ENABLE 0x00000020 + +#define MAX8973_CONTROL_CLKADV_TRIP_DISABLED 0x00000000 +#define MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US 0x00010000 +#define MAX8973_CONTROL_CLKADV_TRIP_150mV_PER_US 0x00020000 +#define MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US_HIST_DIS 0x00030000 + +#define MAX8973_CONTROL_INDUCTOR_VALUE_NOMINAL 0x00000000 +#define MAX8973_CONTROL_INDUCTOR_VALUE_MINUS_30_PER 0x00100000 +#define MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_30_PER 0x00200000 +#define MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_60_PER 0x00300000 + +/* + * struct max8973_regulator_platform_data - max8973 regulator platform data. + * + * @reg_init_data: The regulator init data. + * @control_flags: Control flags which are ORed value of above flags to + * configure device. + * @enable_ext_control: Enable the voltage enable/disable through external + * control signal from EN input pin. If it is false then + * voltage output will be enabled/disabled through EN bit of + * device register. + * @dvs_gpio: GPIO for dvs. It should be -1 if this is tied with fixed logic. + * @dvs_def_state: Default state of dvs. 1 if it is high else 0. + */ +struct max8973_regulator_platform_data { + struct regulator_init_data *reg_init_data; + unsigned long control_flags; + bool enable_ext_control; + int dvs_gpio; + unsigned dvs_def_state:1; +}; + +#endif /* __LINUX_REGULATOR_MAX8973_H */ diff --git a/include/linux/regulator/tps51632-regulator.h b/include/linux/regulator/tps51632-regulator.h new file mode 100644 index 000000000000..d00841e1a75a --- /dev/null +++ b/include/linux/regulator/tps51632-regulator.h @@ -0,0 +1,47 @@ +/* + * tps51632-regulator.h -- TPS51632 regulator + * + * Interface for regulator driver for TPS51632 3-2-1 Phase D-Cap Step Down + * Driverless Controller with serial VID control and DVFS. + * + * Copyright (C) 2012 NVIDIA Corporation + + * Author: Laxman Dewangan <ldewangan@nvidia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + */ + +#ifndef __LINUX_REGULATOR_TPS51632_H +#define __LINUX_REGULATOR_TPS51632_H + +/* + * struct tps51632_regulator_platform_data - tps51632 regulator platform data. + * + * @reg_init_data: The regulator init data. + * @enable_pwm_dvfs: Enable PWM DVFS or not. + * @dvfs_step_20mV: Step for DVFS is 20mV or 10mV. + * @max_voltage_uV: Maximum possible voltage in PWM-DVFS mode. + * @base_voltage_uV: Base voltage when PWM-DVFS enabled. + */ +struct tps51632_regulator_platform_data { + struct regulator_init_data *reg_init_data; + bool enable_pwm_dvfs; + bool dvfs_step_20mV; + int max_voltage_uV; + int base_voltage_uV; +}; + +#endif /* __LINUX_REGULATOR_TPS51632_H */ diff --git a/include/linux/regulator/tps65090-regulator.h b/include/linux/regulator/tps65090-regulator.h deleted file mode 100644 index 0fa04b64db3e..000000000000 --- a/include/linux/regulator/tps65090-regulator.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Regulator driver interface for TI TPS65090 PMIC family - * - * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. - - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef __REGULATOR_TPS65090_H -#define __REGULATOR_TPS65090_H - -#include <linux/regulator/machine.h> - -#define tps65090_rails(_name) "tps65090_"#_name - -enum { - TPS65090_ID_DCDC1, - TPS65090_ID_DCDC2, - TPS65090_ID_DCDC3, - TPS65090_ID_FET1, - TPS65090_ID_FET2, - TPS65090_ID_FET3, - TPS65090_ID_FET4, - TPS65090_ID_FET5, - TPS65090_ID_FET6, - TPS65090_ID_FET7, -}; - -/* - * struct tps65090_regulator_platform_data - * - * @regulator: The regulator init data. - * @slew_rate_uV_per_us: Slew rate microvolt per microsec. - */ - -struct tps65090_regulator_platform_data { - struct regulator_init_data regulator; -}; - -#endif /* __REGULATOR_TPS65090_H */ diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h index 7d7fbe2ef782..5ae8456d9670 100644 --- a/include/linux/res_counter.h +++ b/include/linux/res_counter.h @@ -74,14 +74,9 @@ ssize_t res_counter_read(struct res_counter *counter, int member, const char __user *buf, size_t nbytes, loff_t *pos, int (*read_strategy)(unsigned long long val, char *s)); -typedef int (*write_strategy_fn)(const char *buf, unsigned long long *val); - int res_counter_memparse_write_strategy(const char *buf, unsigned long long *res); -int res_counter_write(struct res_counter *counter, int member, - const char *buffer, write_strategy_fn write_strategy); - /* * the field descriptors. one for each member of res_counter */ @@ -130,14 +125,16 @@ int res_counter_charge_nofail(struct res_counter *counter, * * these calls check for usage underflow and show a warning on the console * _locked call expects the counter->lock to be taken + * + * returns the total charges still present in @counter. */ -void res_counter_uncharge_locked(struct res_counter *counter, unsigned long val); -void res_counter_uncharge(struct res_counter *counter, unsigned long val); +u64 res_counter_uncharge_locked(struct res_counter *counter, unsigned long val); +u64 res_counter_uncharge(struct res_counter *counter, unsigned long val); -void res_counter_uncharge_until(struct res_counter *counter, - struct res_counter *top, - unsigned long val); +u64 res_counter_uncharge_until(struct res_counter *counter, + struct res_counter *top, + unsigned long val); /** * res_counter_margin - calculate chargeable space of a counter * @cnt: the counter diff --git a/include/linux/ring_buffer.h b/include/linux/ring_buffer.h index 6c8835f74f79..519777e3fa01 100644 --- a/include/linux/ring_buffer.h +++ b/include/linux/ring_buffer.h @@ -159,13 +159,14 @@ int ring_buffer_record_is_on(struct ring_buffer *buffer); void ring_buffer_record_disable_cpu(struct ring_buffer *buffer, int cpu); void ring_buffer_record_enable_cpu(struct ring_buffer *buffer, int cpu); -unsigned long ring_buffer_oldest_event_ts(struct ring_buffer *buffer, int cpu); +u64 ring_buffer_oldest_event_ts(struct ring_buffer *buffer, int cpu); unsigned long ring_buffer_bytes_cpu(struct ring_buffer *buffer, int cpu); unsigned long ring_buffer_entries(struct ring_buffer *buffer); unsigned long ring_buffer_overruns(struct ring_buffer *buffer); unsigned long ring_buffer_entries_cpu(struct ring_buffer *buffer, int cpu); unsigned long ring_buffer_overrun_cpu(struct ring_buffer *buffer, int cpu); unsigned long ring_buffer_commit_overrun_cpu(struct ring_buffer *buffer, int cpu); +unsigned long ring_buffer_dropped_events_cpu(struct ring_buffer *buffer, int cpu); u64 ring_buffer_time_stamp(struct ring_buffer *buffer, int cpu); void ring_buffer_normalize_time_stamp(struct ring_buffer *buffer, diff --git a/include/linux/rio.h b/include/linux/rio.h index 4187da511006..a3e784278667 100644 --- a/include/linux/rio.h +++ b/include/linux/rio.h @@ -275,9 +275,11 @@ struct rio_id_table { * struct rio_net - RIO network info * @node: Node in global list of RIO networks * @devices: List of devices in this network + * @switches: List of switches in this netowrk * @mports: List of master ports accessing this network * @hport: Default port for accessing this network * @id: RIO network ID + * @destid_table: destID allocation table */ struct rio_net { struct list_head node; /* node in list of networks */ diff --git a/include/linux/rmap.h b/include/linux/rmap.h index bfe1f4780644..c20635c527a9 100644 --- a/include/linux/rmap.h +++ b/include/linux/rmap.h @@ -7,7 +7,7 @@ #include <linux/list.h> #include <linux/slab.h> #include <linux/mm.h> -#include <linux/mutex.h> +#include <linux/rwsem.h> #include <linux/memcontrol.h> /* @@ -25,8 +25,8 @@ * pointing to this anon_vma once its vma list is empty. */ struct anon_vma { - struct anon_vma *root; /* Root of this anon_vma tree */ - struct mutex mutex; /* Serialize access to vma list */ + struct anon_vma *root; /* Root of this anon_vma tree */ + struct rw_semaphore rwsem; /* W: modification, R: walking the list */ /* * The refcount is taken on an anon_vma when there is no * guarantee that the vma of page tables will exist for @@ -64,7 +64,7 @@ struct anon_vma_chain { struct vm_area_struct *vma; struct anon_vma *anon_vma; struct list_head same_vma; /* locked by mmap_sem & page_table_lock */ - struct rb_node rb; /* locked by anon_vma->mutex */ + struct rb_node rb; /* locked by anon_vma->rwsem */ unsigned long rb_subtree_last; #ifdef CONFIG_DEBUG_VM_RB unsigned long cached_vma_start, cached_vma_last; @@ -108,26 +108,37 @@ static inline void vma_lock_anon_vma(struct vm_area_struct *vma) { struct anon_vma *anon_vma = vma->anon_vma; if (anon_vma) - mutex_lock(&anon_vma->root->mutex); + down_write(&anon_vma->root->rwsem); } static inline void vma_unlock_anon_vma(struct vm_area_struct *vma) { struct anon_vma *anon_vma = vma->anon_vma; if (anon_vma) - mutex_unlock(&anon_vma->root->mutex); + up_write(&anon_vma->root->rwsem); } -static inline void anon_vma_lock(struct anon_vma *anon_vma) +static inline void anon_vma_lock_write(struct anon_vma *anon_vma) { - mutex_lock(&anon_vma->root->mutex); + down_write(&anon_vma->root->rwsem); } static inline void anon_vma_unlock(struct anon_vma *anon_vma) { - mutex_unlock(&anon_vma->root->mutex); + up_write(&anon_vma->root->rwsem); } +static inline void anon_vma_lock_read(struct anon_vma *anon_vma) +{ + down_read(&anon_vma->root->rwsem); +} + +static inline void anon_vma_unlock_read(struct anon_vma *anon_vma) +{ + up_read(&anon_vma->root->rwsem); +} + + /* * anon_vma helper functions. */ @@ -220,8 +231,8 @@ int try_to_munlock(struct page *); /* * Called by memory-failure.c to kill processes. */ -struct anon_vma *page_lock_anon_vma(struct page *page); -void page_unlock_anon_vma(struct anon_vma *anon_vma); +struct anon_vma *page_lock_anon_vma_read(struct page *page); +void page_unlock_anon_vma_read(struct anon_vma *anon_vma); int page_mapped_in_vma(struct page *page, struct vm_area_struct *vma); /* diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h index 7002bbfd5d4a..489dd7bb28ec 100644 --- a/include/linux/rtnetlink.h +++ b/include/linux/rtnetlink.h @@ -69,4 +69,7 @@ extern int ndo_dflt_fdb_dump(struct sk_buff *skb, struct netlink_callback *cb, struct net_device *dev, int idx); + +extern int ndo_dflt_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, + struct net_device *dev, u16 mode); #endif /* __LINUX_RTNETLINK_H */ diff --git a/include/linux/sched.h b/include/linux/sched.h index 0dd42a02df2e..f712465b05c5 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -107,8 +107,18 @@ extern unsigned long this_cpu_load(void); extern void calc_global_load(unsigned long ticks); extern void update_cpu_load_nohz(void); +/* Notifier for when a task gets migrated to a new CPU */ +struct task_migration_notifier { + struct task_struct *task; + int from_cpu; + int to_cpu; +}; +extern void register_task_migration_notifier(struct notifier_block *n); + extern unsigned long get_parent_ip(unsigned long addr); +extern void dump_cpu_task(int cpu); + struct seq_file; struct cfs_rq; struct task_group; @@ -434,13 +444,28 @@ struct cpu_itimer { }; /** + * struct cputime - snaphsot of system and user cputime + * @utime: time spent in user mode + * @stime: time spent in system mode + * + * Gathers a generic snapshot of user and system time. + */ +struct cputime { + cputime_t utime; + cputime_t stime; +}; + +/** * struct task_cputime - collected CPU time counts * @utime: time spent in user mode, in &cputime_t units * @stime: time spent in kernel mode, in &cputime_t units * @sum_exec_runtime: total time spent on the CPU, in nanoseconds * - * This structure groups together three kinds of CPU time that are - * tracked for threads and thread groups. Most things considering + * This is an extension of struct cputime that includes the total runtime + * spent by the task from the scheduler point of view. + * + * As a result, this structure groups together three kinds of CPU time + * that are tracked for threads and thread groups. Most things considering * CPU time want to group these counts together and treat all three * of them in parallel. */ @@ -581,7 +606,7 @@ struct signal_struct { cputime_t gtime; cputime_t cgtime; #ifndef CONFIG_VIRT_CPU_ACCOUNTING - cputime_t prev_utime, prev_stime; + struct cputime prev_cputime; #endif unsigned long nvcsw, nivcsw, cnvcsw, cnivcsw; unsigned long min_flt, maj_flt, cmin_flt, cmaj_flt; @@ -631,9 +656,10 @@ struct signal_struct { struct rw_semaphore group_rwsem; #endif - int oom_score_adj; /* OOM kill score adjustment */ - int oom_score_adj_min; /* OOM kill score adjustment minimum value. - * Only settable by CAP_SYS_RESOURCE. */ + oom_flags_t oom_flags; + short oom_score_adj; /* OOM kill score adjustment */ + short oom_score_adj_min; /* OOM kill score adjustment min value. + * Only settable by CAP_SYS_RESOURCE. */ struct mutex cred_guard_mutex; /* guard against foreign influences on * credential calculations @@ -1061,6 +1087,7 @@ struct sched_class { #ifdef CONFIG_SMP int (*select_task_rq)(struct task_struct *p, int sd_flag, int flags); + void (*migrate_task_rq)(struct task_struct *p, int next_cpu); void (*pre_schedule) (struct rq *this_rq, struct task_struct *task); void (*post_schedule) (struct rq *this_rq); @@ -1095,6 +1122,18 @@ struct load_weight { unsigned long weight, inv_weight; }; +struct sched_avg { + /* + * These sums represent an infinite geometric series and so are bound + * above by 1024/(1-y). Thus we only need a u32 to store them for for all + * choices of y < 1-2^(-32)*1024. + */ + u32 runnable_avg_sum, runnable_avg_period; + u64 last_runnable_update; + s64 decay_count; + unsigned long load_avg_contrib; +}; + #ifdef CONFIG_SCHEDSTATS struct sched_statistics { u64 wait_start; @@ -1155,6 +1194,15 @@ struct sched_entity { /* rq "owned" by this entity/group: */ struct cfs_rq *my_q; #endif +/* + * Load-tracking only depends on SMP, FAIR_GROUP_SCHED dependency below may be + * removed when useful for applications beyond shares distribution (e.g. + * load-balance). + */ +#if defined(CONFIG_SMP) && defined(CONFIG_FAIR_GROUP_SCHED) + /* Per-entity load-tracking */ + struct sched_avg avg; +#endif }; struct sched_rt_entity { @@ -1318,7 +1366,7 @@ struct task_struct { cputime_t utime, stime, utimescaled, stimescaled; cputime_t gtime; #ifndef CONFIG_VIRT_CPU_ACCOUNTING - cputime_t prev_utime, prev_stime; + struct cputime prev_cputime; #endif unsigned long nvcsw, nivcsw; /* context switch counts */ struct timespec start_time; /* monotonic time */ @@ -1479,6 +1527,14 @@ struct task_struct { short il_next; short pref_node_fork; #endif +#ifdef CONFIG_NUMA_BALANCING + int numa_scan_seq; + int numa_migrate_seq; + unsigned int numa_scan_period; + u64 node_stamp; /* migration stamp */ + struct callback_head numa_work; +#endif /* CONFIG_NUMA_BALANCING */ + struct rcu_head rcu; /* @@ -1541,6 +1597,7 @@ struct task_struct { unsigned long nr_pages; /* uncharged usage */ unsigned long memsw_nr_pages; /* uncharged mem+swap usage */ } memcg_batch; + unsigned int memcg_kmem_skip_account; #endif #ifdef CONFIG_HAVE_HW_BREAKPOINT atomic_t ptrace_bp_refcnt; @@ -1553,6 +1610,18 @@ struct task_struct { /* Future-safe accessor for struct task_struct's cpus_allowed. */ #define tsk_cpus_allowed(tsk) (&(tsk)->cpus_allowed) +#ifdef CONFIG_NUMA_BALANCING +extern void task_numa_fault(int node, int pages, bool migrated); +extern void set_numabalancing_state(bool enabled); +#else +static inline void task_numa_fault(int node, int pages, bool migrated) +{ +} +static inline void set_numabalancing_state(bool enabled) +{ +} +#endif + /* * Priority of a process goes from 0..MAX_PRIO-1, valid RT * priority is 0..MAX_RT_PRIO-1, and SCHED_NORMAL/SCHED_BATCH @@ -1710,12 +1779,6 @@ static inline int is_global_init(struct task_struct *tsk) return tsk->pid == 1; } -/* - * is_container_init: - * check whether in the task is init in its own pid namespace. - */ -extern int is_container_init(struct task_struct *tsk); - extern struct pid *cad_pid; extern void free_task(struct task_struct *tsk); @@ -1729,8 +1792,8 @@ static inline void put_task_struct(struct task_struct *t) __put_task_struct(t); } -extern void task_times(struct task_struct *p, cputime_t *ut, cputime_t *st); -extern void thread_group_times(struct task_struct *p, cputime_t *ut, cputime_t *st); +extern void task_cputime_adjusted(struct task_struct *p, cputime_t *ut, cputime_t *st); +extern void thread_group_cputime_adjusted(struct task_struct *p, cputime_t *ut, cputime_t *st); /* * Per process flags @@ -1844,14 +1907,6 @@ static inline void rcu_copy_process(struct task_struct *p) #endif -static inline void rcu_switch(struct task_struct *prev, - struct task_struct *next) -{ -#ifdef CONFIG_RCU_USER_QS - rcu_user_hooks_switch(prev, next); -#endif -} - static inline void tsk_restore_flags(struct task_struct *task, unsigned long orig_flags, unsigned long flags) { @@ -1990,6 +2045,13 @@ enum sched_tunable_scaling { }; extern enum sched_tunable_scaling sysctl_sched_tunable_scaling; +extern unsigned int sysctl_numa_balancing_scan_delay; +extern unsigned int sysctl_numa_balancing_scan_period_min; +extern unsigned int sysctl_numa_balancing_scan_period_max; +extern unsigned int sysctl_numa_balancing_scan_period_reset; +extern unsigned int sysctl_numa_balancing_scan_size; +extern unsigned int sysctl_numa_balancing_settle_count; + #ifdef CONFIG_SCHED_DEBUG extern unsigned int sysctl_sched_migration_cost; extern unsigned int sysctl_sched_nr_migrate; @@ -2271,7 +2333,7 @@ extern void mm_release(struct task_struct *, struct mm_struct *); extern struct mm_struct *dup_mm(struct task_struct *tsk); extern int copy_thread(unsigned long, unsigned long, unsigned long, - struct task_struct *, struct pt_regs *); + struct task_struct *); extern void flush_thread(void); extern void exit_thread(void); @@ -2283,14 +2345,13 @@ extern void flush_itimer_signals(void); extern void do_group_exit(int); -extern void daemonize(const char *, ...); extern int allow_signal(int); extern int disallow_signal(int); extern int do_execve(const char *, const char __user * const __user *, - const char __user * const __user *, struct pt_regs *); -extern long do_fork(unsigned long, unsigned long, struct pt_regs *, unsigned long, int __user *, int __user *); + const char __user * const __user *); +extern long do_fork(unsigned long, unsigned long, unsigned long, int __user *, int __user *); struct task_struct *fork_idle(int); #ifdef CONFIG_GENERIC_KERNEL_THREAD extern pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); diff --git a/include/linux/security.h b/include/linux/security.h index 05e88bdcf7d9..0f6afc657f77 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -694,6 +694,12 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts) * userspace to load a kernel module with the given name. * @kmod_name name of the module requested by the kernel * Return 0 if successful. + * @kernel_module_from_file: + * Load a kernel module from userspace. + * @file contains the file structure pointing to the file containing + * the kernel module to load. If the module is being loaded from a blob, + * this argument will be NULL. + * Return 0 if permission is granted. * @task_fix_setuid: * Update the module's state after setting one or more of the user * identity attributes of the current process. The @flags parameter @@ -1508,6 +1514,7 @@ struct security_operations { int (*kernel_act_as)(struct cred *new, u32 secid); int (*kernel_create_files_as)(struct cred *new, struct inode *inode); int (*kernel_module_request)(char *kmod_name); + int (*kernel_module_from_file)(struct file *file); int (*task_fix_setuid) (struct cred *new, const struct cred *old, int flags); int (*task_setpgid) (struct task_struct *p, pid_t pgid); @@ -1765,6 +1772,7 @@ void security_transfer_creds(struct cred *new, const struct cred *old); int security_kernel_act_as(struct cred *new, u32 secid); int security_kernel_create_files_as(struct cred *new, struct inode *inode); int security_kernel_module_request(char *kmod_name); +int security_kernel_module_from_file(struct file *file); int security_task_fix_setuid(struct cred *new, const struct cred *old, int flags); int security_task_setpgid(struct task_struct *p, pid_t pgid); @@ -2278,6 +2286,11 @@ static inline int security_kernel_module_request(char *kmod_name) return 0; } +static inline int security_kernel_module_from_file(struct file *file) +{ + return 0; +} + static inline int security_task_fix_setuid(struct cred *new, const struct cred *old, int flags) diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index c174c90fb3fb..c490d20b3fb8 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -105,6 +105,8 @@ extern int early_serial_setup(struct uart_port *port); extern int serial8250_find_port(struct uart_port *p); extern int serial8250_find_port_for_earlycon(void); +extern unsigned int serial8250_early_in(struct uart_port *port, int offset); +extern void serial8250_early_out(struct uart_port *port, int offset, int value); extern int setup_early_serial8250_console(char *cmdline); extern void serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old); diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 3c430228d232..c6690a2a27fb 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -46,6 +46,8 @@ struct uart_ops { unsigned int (*get_mctrl)(struct uart_port *); void (*stop_tx)(struct uart_port *); void (*start_tx)(struct uart_port *); + void (*throttle)(struct uart_port *); + void (*unthrottle)(struct uart_port *); void (*send_xchar)(struct uart_port *, char ch); void (*stop_rx)(struct uart_port *); void (*enable_ms)(struct uart_port *); @@ -163,6 +165,10 @@ struct uart_port { #define UPF_BUGGY_UART ((__force upf_t) (1 << 14)) #define UPF_NO_TXEN_TEST ((__force upf_t) (1 << 15)) #define UPF_MAGIC_MULTIPLIER ((__force upf_t) (1 << 16)) +/* Port has hardware-assisted h/w flow control (iow, auto-RTS *not* auto-CTS) */ +#define UPF_HARD_FLOW ((__force upf_t) (1 << 21)) +/* Port has hardware-assisted s/w flow control */ +#define UPF_SOFT_FLOW ((__force upf_t) (1 << 22)) #define UPF_CONS_FLOW ((__force upf_t) (1 << 23)) #define UPF_SHARE_IRQ ((__force upf_t) (1 << 24)) #define UPF_EXAR_EFR ((__force upf_t) (1 << 25)) diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h index 50910913b268..60c72395ec6b 100644 --- a/include/linux/sh_clk.h +++ b/include/linux/sh_clk.h @@ -199,4 +199,13 @@ int sh_clk_div6_reparent_register(struct clk *clks, int nr); #define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk } #define CLKDEV_ICK_ID(_cid, _did, _clk) { .con_id = _cid, .dev_id = _did, .clk = _clk } +/* .enable_reg will be updated to .mapping on sh_clk_fsidiv_register() */ +#define SH_CLK_FSIDIV(_reg, _parent) \ +{ \ + .enable_reg = (void __iomem *)_reg, \ + .parent = _parent, \ +} + +int sh_clk_fsidiv_register(struct clk *clks, int nr); + #endif /* __SH_CLOCK_H */ diff --git a/include/linux/shm.h b/include/linux/shm.h index bcf8a6a3ec00..429c1995d756 100644 --- a/include/linux/shm.h +++ b/include/linux/shm.h @@ -29,6 +29,21 @@ struct shmid_kernel /* private to the kernel */ #define SHM_HUGETLB 04000 /* segment will use huge TLB pages */ #define SHM_NORESERVE 010000 /* don't check for reservations */ +/* Bits [26:31] are reserved */ + +/* + * When SHM_HUGETLB is set bits [26:31] encode the log2 of the huge page size. + * This gives us 6 bits, which is enough until someone invents 128 bit address + * spaces. + * + * Assume these are all power of twos. + * When 0 use the default page size. + */ +#define SHM_HUGE_SHIFT 26 +#define SHM_HUGE_MASK 0x3f +#define SHM_HUGE_2MB (21 << SHM_HUGE_SHIFT) +#define SHM_HUGE_1GB (30 << SHM_HUGE_SHIFT) + #ifdef CONFIG_SYSVIPC long do_shmat(int shmid, char __user *shmaddr, int shmflg, unsigned long *addr, unsigned long shmlba); diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 6a2c34e6d962..320e976d5ab8 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -235,11 +235,13 @@ enum { /* * The callback notifies userspace to release buffers when skb DMA is done in * lower device, the skb last reference should be 0 when calling this. + * The zerocopy_success argument is true if zero copy transmit occurred, + * false on data copy or out of memory error caused by data copy attempt. * The ctx field is used to track device context. * The desc field is used to track userspace buffer index. */ struct ubuf_info { - void (*callback)(struct ubuf_info *); + void (*callback)(struct ubuf_info *, bool zerocopy_success); void *ctx; unsigned long desc; }; @@ -374,6 +376,8 @@ typedef unsigned char *sk_buff_data_t; * @mark: Generic packet mark * @dropcount: total number of sk_receive_queue overflows * @vlan_tci: vlan tag control information + * @inner_transport_header: Inner transport layer header (encapsulation) + * @inner_network_header: Network layer header (encapsulation) * @transport_header: Transport layer header * @network_header: Network layer header * @mac_header: Link layer header @@ -469,7 +473,13 @@ struct sk_buff { __u8 wifi_acked:1; __u8 no_fcs:1; __u8 head_frag:1; - /* 8/10 bit hole (depending on ndisc_nodetype presence) */ + /* Encapsulation protocol and NIC drivers should use + * this flag to indicate to each other if the skb contains + * encapsulated packet or not and maybe use the inner packet + * headers if needed + */ + __u8 encapsulation:1; + /* 7/9 bit hole (depending on ndisc_nodetype presence) */ kmemcheck_bitfield_end(flags2); #ifdef CONFIG_NET_DMA @@ -484,6 +494,8 @@ struct sk_buff { __u32 avail_size; }; + sk_buff_data_t inner_transport_header; + sk_buff_data_t inner_network_header; sk_buff_data_t transport_header; sk_buff_data_t network_header; sk_buff_data_t mac_header; @@ -566,6 +578,7 @@ static inline struct rtable *skb_rtable(const struct sk_buff *skb) } extern void kfree_skb(struct sk_buff *skb); +extern void skb_tx_error(struct sk_buff *skb); extern void consume_skb(struct sk_buff *skb); extern void __kfree_skb(struct sk_buff *skb); extern struct kmem_cache *skbuff_head_cache; @@ -643,7 +656,7 @@ extern unsigned int skb_find_text(struct sk_buff *skb, unsigned int from, extern void __skb_get_rxhash(struct sk_buff *skb); static inline __u32 skb_get_rxhash(struct sk_buff *skb) { - if (!skb->rxhash) + if (!skb->l4_rxhash) __skb_get_rxhash(skb); return skb->rxhash; @@ -1432,12 +1445,53 @@ static inline void skb_reserve(struct sk_buff *skb, int len) skb->tail += len; } +static inline void skb_reset_inner_headers(struct sk_buff *skb) +{ + skb->inner_network_header = skb->network_header; + skb->inner_transport_header = skb->transport_header; +} + static inline void skb_reset_mac_len(struct sk_buff *skb) { skb->mac_len = skb->network_header - skb->mac_header; } #ifdef NET_SKBUFF_DATA_USES_OFFSET +static inline unsigned char *skb_inner_transport_header(const struct sk_buff + *skb) +{ + return skb->head + skb->inner_transport_header; +} + +static inline void skb_reset_inner_transport_header(struct sk_buff *skb) +{ + skb->inner_transport_header = skb->data - skb->head; +} + +static inline void skb_set_inner_transport_header(struct sk_buff *skb, + const int offset) +{ + skb_reset_inner_transport_header(skb); + skb->inner_transport_header += offset; +} + +static inline unsigned char *skb_inner_network_header(const struct sk_buff *skb) +{ + return skb->head + skb->inner_network_header; +} + +static inline void skb_reset_inner_network_header(struct sk_buff *skb) +{ + skb->inner_network_header = skb->data - skb->head; +} + +static inline void skb_set_inner_network_header(struct sk_buff *skb, + const int offset) +{ + skb_reset_inner_network_header(skb); + skb->inner_network_header += offset; +} + static inline unsigned char *skb_transport_header(const struct sk_buff *skb) { return skb->head + skb->transport_header; @@ -1493,6 +1547,38 @@ static inline void skb_set_mac_header(struct sk_buff *skb, const int offset) } #else /* NET_SKBUFF_DATA_USES_OFFSET */ +static inline unsigned char *skb_inner_transport_header(const struct sk_buff + *skb) +{ + return skb->inner_transport_header; +} + +static inline void skb_reset_inner_transport_header(struct sk_buff *skb) +{ + skb->inner_transport_header = skb->data; +} + +static inline void skb_set_inner_transport_header(struct sk_buff *skb, + const int offset) +{ + skb->inner_transport_header = skb->data + offset; +} + +static inline unsigned char *skb_inner_network_header(const struct sk_buff *skb) +{ + return skb->inner_network_header; +} + +static inline void skb_reset_inner_network_header(struct sk_buff *skb) +{ + skb->inner_network_header = skb->data; +} + +static inline void skb_set_inner_network_header(struct sk_buff *skb, + const int offset) +{ + skb->inner_network_header = skb->data + offset; +} static inline unsigned char *skb_transport_header(const struct sk_buff *skb) { @@ -1571,11 +1657,21 @@ static inline u32 skb_network_header_len(const struct sk_buff *skb) return skb->transport_header - skb->network_header; } +static inline u32 skb_inner_network_header_len(const struct sk_buff *skb) +{ + return skb->inner_transport_header - skb->inner_network_header; +} + static inline int skb_network_offset(const struct sk_buff *skb) { return skb_network_header(skb) - skb->data; } +static inline int skb_inner_network_offset(const struct sk_buff *skb) +{ + return skb_inner_network_header(skb) - skb->data; +} + static inline int pskb_network_may_pull(struct sk_buff *skb, unsigned int len) { return pskb_may_pull(skb, skb_network_offset(skb) + len); diff --git a/include/linux/slab.h b/include/linux/slab.h index 83d1a1454b7e..5d168d7e0a28 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -11,6 +11,8 @@ #include <linux/gfp.h> #include <linux/types.h> +#include <linux/workqueue.h> + /* * Flags to pass to kmem_cache_create(). @@ -116,6 +118,7 @@ struct kmem_cache { }; #endif +struct mem_cgroup; /* * struct kmem_cache related prototypes */ @@ -125,10 +128,12 @@ int slab_is_available(void); struct kmem_cache *kmem_cache_create(const char *, size_t, size_t, unsigned long, void (*)(void *)); +struct kmem_cache * +kmem_cache_create_memcg(struct mem_cgroup *, const char *, size_t, size_t, + unsigned long, void (*)(void *), struct kmem_cache *); void kmem_cache_destroy(struct kmem_cache *); int kmem_cache_shrink(struct kmem_cache *); void kmem_cache_free(struct kmem_cache *, void *); -unsigned int kmem_cache_size(struct kmem_cache *); /* * Please use this macro to create slab caches. Simply specify the @@ -176,6 +181,48 @@ unsigned int kmem_cache_size(struct kmem_cache *); #ifndef ARCH_SLAB_MINALIGN #define ARCH_SLAB_MINALIGN __alignof__(unsigned long long) #endif +/* + * This is the main placeholder for memcg-related information in kmem caches. + * struct kmem_cache will hold a pointer to it, so the memory cost while + * disabled is 1 pointer. The runtime cost while enabled, gets bigger than it + * would otherwise be if that would be bundled in kmem_cache: we'll need an + * extra pointer chase. But the trade off clearly lays in favor of not + * penalizing non-users. + * + * Both the root cache and the child caches will have it. For the root cache, + * this will hold a dynamically allocated array large enough to hold + * information about the currently limited memcgs in the system. + * + * Child caches will hold extra metadata needed for its operation. Fields are: + * + * @memcg: pointer to the memcg this cache belongs to + * @list: list_head for the list of all caches in this memcg + * @root_cache: pointer to the global, root cache, this cache was derived from + * @dead: set to true after the memcg dies; the cache may still be around. + * @nr_pages: number of pages that belongs to this cache. + * @destroy: worker to be called whenever we are ready, or believe we may be + * ready, to destroy this cache. + */ +struct memcg_cache_params { + bool is_root_cache; + union { + struct kmem_cache *memcg_caches[0]; + struct { + struct mem_cgroup *memcg; + struct list_head list; + struct kmem_cache *root_cache; + bool dead; + atomic_t nr_pages; + struct work_struct destroy; + }; + }; +}; + +int memcg_update_all_caches(int num_memcgs); + +struct seq_file; +int cache_show(struct kmem_cache *s, struct seq_file *m); +void print_slabinfo_header(struct seq_file *m); /* * Common kmalloc functions provided by all allocators @@ -388,6 +435,14 @@ static inline void *kzalloc_node(size_t size, gfp_t flags, int node) return kmalloc_node(size, flags | __GFP_ZERO, node); } +/* + * Determine the size of a slab object + */ +static inline unsigned int kmem_cache_size(struct kmem_cache *s) +{ + return s->object_size; +} + void __init kmem_cache_init_late(void); #endif /* _LINUX_SLAB_H */ diff --git a/include/linux/slab_def.h b/include/linux/slab_def.h index cc290f0bdb34..8bb6e0eaf3c6 100644 --- a/include/linux/slab_def.h +++ b/include/linux/slab_def.h @@ -81,6 +81,9 @@ struct kmem_cache { */ int obj_offset; #endif /* CONFIG_DEBUG_SLAB */ +#ifdef CONFIG_MEMCG_KMEM + struct memcg_cache_params *memcg_params; +#endif /* 6) per-cpu/per-node data, touched during every alloc/free */ /* @@ -89,9 +92,13 @@ struct kmem_cache { * (see kmem_cache_init()) * We still use [NR_CPUS] and not [1] or [0] because cache_cache * is statically defined, so we reserve the max number of cpus. + * + * We also need to guarantee that the list is able to accomodate a + * pointer for each node since "nodelists" uses the remainder of + * available pointers. */ struct kmem_list3 **nodelists; - struct array_cache *array[NR_CPUS]; + struct array_cache *array[NR_CPUS + MAX_NUMNODES]; /* * Do not add fields after array[] */ diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index df448adb7283..9db4825cd393 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -101,6 +101,10 @@ struct kmem_cache { #ifdef CONFIG_SYSFS struct kobject kobj; /* For sysfs */ #endif +#ifdef CONFIG_MEMCG_KMEM + struct memcg_cache_params *memcg_params; + int max_attr_size; /* for propagation, maximum size of a stored attr */ +#endif #ifdef CONFIG_NUMA /* @@ -222,7 +226,10 @@ void *__kmalloc(size_t size, gfp_t flags); static __always_inline void * kmalloc_order(size_t size, gfp_t flags, unsigned int order) { - void *ret = (void *) __get_free_pages(flags | __GFP_COMP, order); + void *ret; + + flags |= (__GFP_COMP | __GFP_KMEMCG); + ret = (void *) __get_free_pages(flags, order); kmemleak_alloc(ret, size, 1, flags); return ret; } diff --git a/include/linux/smscphy.h b/include/linux/smscphy.h index ce718cbce435..f4bf16e16e16 100644 --- a/include/linux/smscphy.h +++ b/include/linux/smscphy.h @@ -4,6 +4,7 @@ #define MII_LAN83C185_ISF 29 /* Interrupt Source Flags */ #define MII_LAN83C185_IM 30 /* Interrupt Mask */ #define MII_LAN83C185_CTRL_STATUS 17 /* Mode/Status Register */ +#define MII_LAN83C185_SPECIAL_MODES 18 /* Special Modes Register */ #define MII_LAN83C185_ISF_INT1 (1<<1) /* Auto-Negotiation Page Received */ #define MII_LAN83C185_ISF_INT2 (1<<2) /* Parallel Detection Fault */ @@ -22,4 +23,8 @@ #define MII_LAN83C185_EDPWRDOWN (1 << 13) /* EDPWRDOWN */ #define MII_LAN83C185_ENERGYON (1 << 1) /* ENERGYON */ +#define MII_LAN83C185_MODE_MASK 0xE0 +#define MII_LAN83C185_MODE_POWERDOWN 0xC0 /* Power Down mode */ +#define MII_LAN83C185_MODE_ALL 0xE0 /* All capable mode */ + #endif /* __LINUX_SMSCPHY_H__ */ diff --git a/include/linux/spi/Kbuild b/include/linux/spi/Kbuild deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/include/linux/spi/Kbuild +++ /dev/null diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h index c64de9dd7631..2f694f3846a9 100644 --- a/include/linux/spi/ads7846.h +++ b/include/linux/spi/ads7846.h @@ -46,8 +46,9 @@ struct ads7846_platform_data { u16 debounce_rep; /* additional consecutive good readings * required after the first two */ int gpio_pendown; /* the GPIO used to decide the pendown - * state if get_pendown_state == NULL - */ + * state if get_pendown_state == NULL */ + int gpio_pendown_debounce; /* platform specific debounce time for + * the gpio_pendown */ int (*get_pendown_state)(void); int (*filter_init) (const struct ads7846_platform_data *pdata, void **filter_data); diff --git a/include/linux/spi/spi-tegra.h b/include/linux/spi/spi-tegra.h new file mode 100644 index 000000000000..786932c62edb --- /dev/null +++ b/include/linux/spi/spi-tegra.h @@ -0,0 +1,40 @@ +/* + * spi-tegra.h: SPI interface for Nvidia Tegra20 SLINK controller. + * + * Copyright (C) 2011 NVIDIA Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#ifndef _LINUX_SPI_TEGRA_H +#define _LINUX_SPI_TEGRA_H + +struct tegra_spi_platform_data { + int dma_req_sel; + unsigned int spi_max_frequency; +}; + +/* + * Controller data from device to pass some info like + * hw based chip select can be used or not and if yes + * then CS hold and setup time. + */ +struct tegra_spi_device_controller_data { + bool is_hw_based_cs; + int cs_setup_clk_count; + int cs_hold_clk_count; +}; + +#endif /* _LINUX_SPI_TEGRA_H */ diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index fa702aeb5038..f62918946d86 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -90,6 +90,7 @@ struct spi_device { void *controller_state; void *controller_data; char modalias[SPI_NAME_SIZE]; + int cs_gpio; /* chip select gpio */ /* * likely need more hooks for more protocol options affecting how @@ -362,6 +363,8 @@ struct spi_master { int (*transfer_one_message)(struct spi_master *master, struct spi_message *mesg); int (*unprepare_transfer_hardware)(struct spi_master *master); + /* gpio chip select */ + int *cs_gpios; }; static inline void *spi_master_get_devdata(struct spi_master *master) diff --git a/include/linux/spi/tsc2005.h b/include/linux/spi/tsc2005.h index d9b0c84220c7..8f721e465e05 100644 --- a/include/linux/spi/tsc2005.h +++ b/include/linux/spi/tsc2005.h @@ -3,8 +3,6 @@ * * Copyright (C) 2009-2010 Nokia Corporation * - * Contact: Aaro Koskinen <aaro.koskinen@nokia.com> - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or diff --git a/include/linux/srcu.h b/include/linux/srcu.h index 55a5c52cbb25..6eb691b08358 100644 --- a/include/linux/srcu.h +++ b/include/linux/srcu.h @@ -16,8 +16,10 @@ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * * Copyright (C) IBM Corporation, 2006 + * Copyright (C) Fujitsu, 2012 * * Author: Paul McKenney <paulmck@us.ibm.com> + * Lai Jiangshan <laijs@cn.fujitsu.com> * * For detailed explanation of Read-Copy Update mechanism see - * Documentation/RCU/ *.txt @@ -40,6 +42,8 @@ struct rcu_batch { struct rcu_head *head, **tail; }; +#define RCU_BATCH_INIT(name) { NULL, &(name.head) } + struct srcu_struct { unsigned completed; struct srcu_struct_array __percpu *per_cpu_ref; @@ -70,12 +74,42 @@ int __init_srcu_struct(struct srcu_struct *sp, const char *name, __init_srcu_struct((sp), #sp, &__srcu_key); \ }) +#define __SRCU_DEP_MAP_INIT(srcu_name) .dep_map = { .name = #srcu_name }, #else /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */ int init_srcu_struct(struct srcu_struct *sp); +#define __SRCU_DEP_MAP_INIT(srcu_name) #endif /* #else #ifdef CONFIG_DEBUG_LOCK_ALLOC */ +void process_srcu(struct work_struct *work); + +#define __SRCU_STRUCT_INIT(name) \ + { \ + .completed = -300, \ + .per_cpu_ref = &name##_srcu_array, \ + .queue_lock = __SPIN_LOCK_UNLOCKED(name.queue_lock), \ + .running = false, \ + .batch_queue = RCU_BATCH_INIT(name.batch_queue), \ + .batch_check0 = RCU_BATCH_INIT(name.batch_check0), \ + .batch_check1 = RCU_BATCH_INIT(name.batch_check1), \ + .batch_done = RCU_BATCH_INIT(name.batch_done), \ + .work = __DELAYED_WORK_INITIALIZER(name.work, process_srcu, 0),\ + __SRCU_DEP_MAP_INIT(name) \ + } + +/* + * define and init a srcu struct at build time. + * dont't call init_srcu_struct() nor cleanup_srcu_struct() on it. + */ +#define DEFINE_SRCU(name) \ + static DEFINE_PER_CPU(struct srcu_struct_array, name##_srcu_array);\ + struct srcu_struct name = __SRCU_STRUCT_INIT(name); + +#define DEFINE_STATIC_SRCU(name) \ + static DEFINE_PER_CPU(struct srcu_struct_array, name##_srcu_array);\ + static struct srcu_struct name = __SRCU_STRUCT_INIT(name); + /** * call_srcu() - Queue a callback for invocation after an SRCU grace period * @sp: srcu_struct in queue the callback diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index bb674c02f306..22958d68ecfe 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -6,8 +6,10 @@ #include <linux/types.h> #include <linux/spinlock.h> #include <linux/pci.h> +#include <linux/gpio.h> #include <linux/mod_devicetable.h> #include <linux/dma-mapping.h> +#include <linux/platform_device.h> #include <linux/ssb/ssb_regs.h> @@ -432,7 +434,11 @@ struct ssb_bus { #ifdef CONFIG_SSB_EMBEDDED /* Lock for GPIO register access. */ spinlock_t gpio_lock; + struct platform_device *watchdog; #endif /* EMBEDDED */ +#ifdef CONFIG_SSB_DRIVER_GPIO + struct gpio_chip gpio; +#endif /* DRIVER_GPIO */ /* Internal-only stuff follows. Do not touch. */ struct list_head list; diff --git a/include/linux/ssb/ssb_driver_chipcommon.h b/include/linux/ssb/ssb_driver_chipcommon.h index c2b02a5c86ae..9e492be5244b 100644 --- a/include/linux/ssb/ssb_driver_chipcommon.h +++ b/include/linux/ssb/ssb_driver_chipcommon.h @@ -590,7 +590,10 @@ struct ssb_chipcommon { u32 status; /* Fast Powerup Delay constant */ u16 fast_pwrup_delay; + spinlock_t gpio_lock; struct ssb_chipcommon_pmu pmu; + u32 ticks_per_ms; + u32 max_timer_ms; }; static inline bool ssb_chipco_available(struct ssb_chipcommon *cc) @@ -630,8 +633,7 @@ enum ssb_clkmode { extern void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc, enum ssb_clkmode mode); -extern void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, - u32 ticks); +extern u32 ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks); void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value); @@ -644,6 +646,8 @@ u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value); u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value); u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value); u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value); +u32 ssb_chipco_gpio_pullup(struct ssb_chipcommon *cc, u32 mask, u32 value); +u32 ssb_chipco_gpio_pulldown(struct ssb_chipcommon *cc, u32 mask, u32 value); #ifdef CONFIG_SSB_SERIAL extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc, diff --git a/include/linux/ssb/ssb_driver_extif.h b/include/linux/ssb/ssb_driver_extif.h index 91161f0aa22b..a410e841eb91 100644 --- a/include/linux/ssb/ssb_driver_extif.h +++ b/include/linux/ssb/ssb_driver_extif.h @@ -152,12 +152,16 @@ /* watchdog */ #define SSB_EXTIF_WATCHDOG_CLK 48000000 /* Hz */ +#define SSB_EXTIF_WATCHDOG_MAX_TIMER ((1 << 28) - 1) +#define SSB_EXTIF_WATCHDOG_MAX_TIMER_MS (SSB_EXTIF_WATCHDOG_MAX_TIMER \ + / (SSB_EXTIF_WATCHDOG_CLK / 1000)) #ifdef CONFIG_SSB_DRIVER_EXTIF struct ssb_extif { struct ssb_device *dev; + spinlock_t gpio_lock; }; static inline bool ssb_extif_available(struct ssb_extif *extif) @@ -171,8 +175,7 @@ extern void ssb_extif_get_clockcontrol(struct ssb_extif *extif, extern void ssb_extif_timing_init(struct ssb_extif *extif, unsigned long ns); -extern void ssb_extif_watchdog_timer_set(struct ssb_extif *extif, - u32 ticks); +extern u32 ssb_extif_watchdog_timer_set(struct ssb_extif *extif, u32 ticks); /* Extif GPIO pin access */ u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask); @@ -205,10 +208,52 @@ void ssb_extif_get_clockcontrol(struct ssb_extif *extif, } static inline -void ssb_extif_watchdog_timer_set(struct ssb_extif *extif, - u32 ticks) +void ssb_extif_timing_init(struct ssb_extif *extif, unsigned long ns) { } +static inline +u32 ssb_extif_watchdog_timer_set(struct ssb_extif *extif, u32 ticks) +{ + return 0; +} + +static inline u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask) +{ + return 0; +} + +static inline u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, + u32 value) +{ + return 0; +} + +static inline u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, + u32 value) +{ + return 0; +} + +static inline u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, + u32 value) +{ + return 0; +} + +static inline u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, + u32 value) +{ + return 0; +} + +#ifdef CONFIG_SSB_SERIAL +static inline int ssb_extif_serial_init(struct ssb_extif *extif, + struct ssb_serial_port *ports) +{ + return 0; +} +#endif /* CONFIG_SSB_SERIAL */ + #endif /* CONFIG_SSB_DRIVER_EXTIF */ #endif /* LINUX_SSB_EXTIFCORE_H_ */ diff --git a/include/linux/ssb/ssb_driver_mips.h b/include/linux/ssb/ssb_driver_mips.h index 5f44e9740cd2..07a9c7a2e088 100644 --- a/include/linux/ssb/ssb_driver_mips.h +++ b/include/linux/ssb/ssb_driver_mips.h @@ -13,6 +13,12 @@ struct ssb_serial_port { unsigned int reg_shift; }; +struct ssb_pflash { + bool present; + u8 buswidth; + u32 window; + u32 window_size; +}; struct ssb_mipscore { struct ssb_device *dev; @@ -20,9 +26,7 @@ struct ssb_mipscore { int nr_serial_ports; struct ssb_serial_port serial_ports[4]; - u8 flash_buswidth; - u32 flash_window; - u32 flash_window_size; + struct ssb_pflash pflash; }; extern void ssb_mipscore_init(struct ssb_mipscore *mcore); diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index a0525019e1d1..6ecfa02ddbac 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -485,7 +485,7 @@ #define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT 4 #define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL 0x0020 #define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT 5 -#define SSB_SPROM8_TEMPDELTA 0x00BA +#define SSB_SPROM8_TEMPDELTA 0x00BC #define SSB_SPROM8_TEMPDELTA_PHYCAL 0x00ff #define SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT 0 #define SSB_SPROM8_TEMPDELTA_PERIOD 0x0f00 diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index a1547ea3920d..c1b3ed3fb787 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -61,7 +61,7 @@ #define STMMAC_CSR_I_16 0xE /* clk_csr_i/16 */ #define STMMAC_CSR_I_18 0xF /* clk_csr_i/18 */ -/* AXI DMA Burst length suported */ +/* AXI DMA Burst length supported */ #define DMA_AXI_BLEN_4 (1 << 1) #define DMA_AXI_BLEN_8 (1 << 2) #define DMA_AXI_BLEN_16 (1 << 3) @@ -104,6 +104,7 @@ struct plat_stmmacenet_data { int bugged_jumbo; int pmt; int force_sf_dma_mode; + int riwt_off; void (*fix_mac_speed)(void *priv, unsigned int speed); void (*bus_setup)(void __iomem *ioaddr); int (*init)(struct platform_device *pdev); diff --git a/include/linux/string.h b/include/linux/string.h index 630125818ca8..ac889c5ea11b 100644 --- a/include/linux/string.h +++ b/include/linux/string.h @@ -143,4 +143,15 @@ static inline bool strstarts(const char *str, const char *prefix) extern size_t memweight(const void *ptr, size_t bytes); +/** + * kbasename - return the last part of a pathname. + * + * @path: path to extract the filename from. + */ +static inline const char *kbasename(const char *path) +{ + const char *tail = strrchr(path, '/'); + return tail ? tail + 1 : path; +} + #endif /* _LINUX_STRING_H_ */ diff --git a/include/linux/sunrpc/Kbuild b/include/linux/sunrpc/Kbuild deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/include/linux/sunrpc/Kbuild +++ /dev/null diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h index dc0c3cc3ada3..b64f8eb0b973 100644 --- a/include/linux/sunrpc/sched.h +++ b/include/linux/sunrpc/sched.h @@ -192,7 +192,6 @@ struct rpc_wait_queue { pid_t owner; /* process id of last task serviced */ unsigned char maxpriority; /* maximum priority (0 if queue is not a priority queue) */ unsigned char priority; /* current priority */ - unsigned char count; /* # task groups remaining serviced so far */ unsigned char nr; /* # tasks remaining for cookie */ unsigned short qlen; /* total # tasks waiting in queue */ struct rpc_timer timer_list; diff --git a/include/linux/sunxi_timer.h b/include/linux/sunxi_timer.h new file mode 100644 index 000000000000..b9165bba6e61 --- /dev/null +++ b/include/linux/sunxi_timer.h @@ -0,0 +1,24 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __SUNXI_TIMER_H +#define __SUNXI_TIMER_H + +#include <asm/mach/time.h> + +extern struct sys_timer sunxi_timer; + +#endif diff --git a/include/linux/swiotlb.h b/include/linux/swiotlb.h index 8d08b3ed406d..071d62c214a6 100644 --- a/include/linux/swiotlb.h +++ b/include/linux/swiotlb.h @@ -34,21 +34,25 @@ enum dma_sync_target { SYNC_FOR_CPU = 0, SYNC_FOR_DEVICE = 1, }; -extern void *swiotlb_tbl_map_single(struct device *hwdev, dma_addr_t tbl_dma_addr, - phys_addr_t phys, size_t size, - enum dma_data_direction dir); -extern void swiotlb_tbl_unmap_single(struct device *hwdev, char *dma_addr, +/* define the last possible byte of physical address space as a mapping error */ +#define SWIOTLB_MAP_ERROR (~(phys_addr_t)0x0) + +extern phys_addr_t swiotlb_tbl_map_single(struct device *hwdev, + dma_addr_t tbl_dma_addr, + phys_addr_t phys, size_t size, + enum dma_data_direction dir); + +extern void swiotlb_tbl_unmap_single(struct device *hwdev, + phys_addr_t tlb_addr, size_t size, enum dma_data_direction dir); -extern void swiotlb_tbl_sync_single(struct device *hwdev, char *dma_addr, +extern void swiotlb_tbl_sync_single(struct device *hwdev, + phys_addr_t tlb_addr, size_t size, enum dma_data_direction dir, enum dma_sync_target target); /* Accessory functions. */ -extern void swiotlb_bounce(phys_addr_t phys, char *dma_addr, size_t size, - enum dma_data_direction dir); - extern void *swiotlb_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t flags); diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 727f0cd73921..6caee34bf8a2 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -560,10 +560,10 @@ asmlinkage long sys_utime(char __user *filename, asmlinkage long sys_utimes(char __user *filename, struct timeval __user *utimes); asmlinkage long sys_lseek(unsigned int fd, off_t offset, - unsigned int origin); + unsigned int whence); asmlinkage long sys_llseek(unsigned int fd, unsigned long offset_high, unsigned long offset_low, loff_t __user *result, - unsigned int origin); + unsigned int whence); asmlinkage long sys_read(unsigned int fd, char __user *buf, size_t count); asmlinkage long sys_readahead(int fd, loff_t offset, size_t count); asmlinkage long sys_readv(unsigned long fd, @@ -833,10 +833,22 @@ int kernel_execve(const char *filename, const char *const argv[], const char *co #define kernel_execve(filename, argv, envp) \ do_execve(filename, \ (const char __user *const __user *)argv, \ - (const char __user *const __user *)envp, \ - current_pt_regs()) + (const char __user *const __user *)envp) #endif +asmlinkage long sys_fork(void); +asmlinkage long sys_vfork(void); +#ifdef CONFIG_CLONE_BACKWARDS +asmlinkage long sys_clone(unsigned long, unsigned long, int __user *, int, + int __user *); +#else +asmlinkage long sys_clone(unsigned long, unsigned long, int __user *, + int __user *, int); +#endif + +asmlinkage long sys_execve(const char __user *filename, + const char __user *const __user *argv, + const char __user *const __user *envp); asmlinkage long sys_perf_event_open( struct perf_event_attr __user *attr_uptr, @@ -868,4 +880,5 @@ asmlinkage long sys_process_vm_writev(pid_t pid, asmlinkage long sys_kcmp(pid_t pid1, pid_t pid2, int type, unsigned long idx1, unsigned long idx2); +asmlinkage long sys_finit_module(int fd, const char __user *uargs, int flags); #endif diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h index cd844a6a8d5f..14a8ff2de11e 100644 --- a/include/linux/sysctl.h +++ b/include/linux/sysctl.h @@ -158,8 +158,7 @@ struct ctl_table_root { struct ctl_table_set default_set; struct ctl_table_set *(*lookup)(struct ctl_table_root *root, struct nsproxy *namespaces); - int (*permissions)(struct ctl_table_root *root, - struct nsproxy *namespaces, struct ctl_table *table); + int (*permissions)(struct ctl_table_header *head, struct ctl_table *table); }; /* struct ctl_path describes where in the hierarchy a table is added */ diff --git a/include/linux/tc_act/Kbuild b/include/linux/tc_act/Kbuild deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/include/linux/tc_act/Kbuild +++ /dev/null diff --git a/include/linux/tc_ematch/Kbuild b/include/linux/tc_ematch/Kbuild deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/include/linux/tc_ematch/Kbuild +++ /dev/null diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 8a7fc4be2d75..4e1d2283e3cc 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -35,6 +35,16 @@ static inline unsigned int tcp_hdrlen(const struct sk_buff *skb) return tcp_hdr(skb)->doff * 4; } +static inline struct tcphdr *inner_tcp_hdr(const struct sk_buff *skb) +{ + return (struct tcphdr *)skb_inner_transport_header(skb); +} + +static inline unsigned int inner_tcp_hdrlen(const struct sk_buff *skb) +{ + return inner_tcp_hdr(skb)->doff * 4; +} + static inline unsigned int tcp_optlen(const struct sk_buff *skb) { return (tcp_hdr(skb)->doff - 5) * 4; @@ -191,7 +201,8 @@ struct tcp_sock { u8 do_early_retrans:1,/* Enable RFC5827 early-retransmit */ early_retrans_delayed:1, /* Delayed ER timer installed */ syn_data:1, /* SYN includes data */ - syn_fastopen:1; /* SYN includes Fast Open option */ + syn_fastopen:1, /* SYN includes Fast Open option */ + syn_data_acked:1;/* data in SYN is acked by SYN-ACK */ /* RTT measurement */ u32 srtt; /* smoothed round trip time << 3 */ diff --git a/include/linux/tegra-ahb.h b/include/linux/tegra-ahb.h new file mode 100644 index 000000000000..f1cd075ceee1 --- /dev/null +++ b/include/linux/tegra-ahb.h @@ -0,0 +1,19 @@ +/* + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef __LINUX_AHB_H__ +#define __LINUX_AHB_H__ + +extern int tegra_ahb_enable_smmu(struct device_node *ahb); + +#endif /* __LINUX_AHB_H__ */ diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 91b34812cd84..fe82022478e7 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -29,6 +29,32 @@ #include <linux/device.h> #include <linux/workqueue.h> +#define THERMAL_TRIPS_NONE -1 +#define THERMAL_MAX_TRIPS 12 +#define THERMAL_NAME_LENGTH 20 + +/* No upper/lower limit requirement */ +#define THERMAL_NO_LIMIT -1UL + +/* Unit conversion macros */ +#define KELVIN_TO_CELSIUS(t) (long)(((long)t-2732 >= 0) ? \ + ((long)t-2732+5)/10 : ((long)t-2732-5)/10) +#define CELSIUS_TO_KELVIN(t) ((t)*10+2732) + +/* Adding event notification support elements */ +#define THERMAL_GENL_FAMILY_NAME "thermal_event" +#define THERMAL_GENL_VERSION 0x01 +#define THERMAL_GENL_MCAST_GROUP_NAME "thermal_mc_group" + +/* Default Thermal Governor */ +#if defined(CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE) +#define DEFAULT_THERMAL_GOVERNOR "step_wise" +#elif defined(CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE) +#define DEFAULT_THERMAL_GOVERNOR "fair_share" +#elif defined(CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE) +#define DEFAULT_THERMAL_GOVERNOR "user_space" +#endif + struct thermal_zone_device; struct thermal_cooling_device; @@ -50,6 +76,30 @@ enum thermal_trend { THERMAL_TREND_DROPPING, /* temperature is dropping */ }; +/* Events supported by Thermal Netlink */ +enum events { + THERMAL_AUX0, + THERMAL_AUX1, + THERMAL_CRITICAL, + THERMAL_DEV_FAULT, +}; + +/* attributes of thermal_genl_family */ +enum { + THERMAL_GENL_ATTR_UNSPEC, + THERMAL_GENL_ATTR_EVENT, + __THERMAL_GENL_ATTR_MAX, +}; +#define THERMAL_GENL_ATTR_MAX (__THERMAL_GENL_ATTR_MAX - 1) + +/* commands supported by the thermal_genl_family */ +enum { + THERMAL_GENL_CMD_UNSPEC, + THERMAL_GENL_CMD_EVENT, + __THERMAL_GENL_CMD_MAX, +}; +#define THERMAL_GENL_CMD_MAX (__THERMAL_GENL_CMD_MAX - 1) + struct thermal_zone_device_ops { int (*bind) (struct thermal_zone_device *, struct thermal_cooling_device *); @@ -83,11 +133,6 @@ struct thermal_cooling_device_ops { int (*set_cur_state) (struct thermal_cooling_device *, unsigned long); }; -#define THERMAL_NO_LIMIT -1UL /* no upper/lower limit requirement */ - -#define THERMAL_TRIPS_NONE -1 -#define THERMAL_MAX_TRIPS 12 -#define THERMAL_NAME_LENGTH 20 struct thermal_cooling_device { int id; char type[THERMAL_NAME_LENGTH]; @@ -100,10 +145,6 @@ struct thermal_cooling_device { struct list_head node; }; -#define KELVIN_TO_CELSIUS(t) (long)(((long)t-2732 >= 0) ? \ - ((long)t-2732+5)/10 : ((long)t-2732-5)/10) -#define CELSIUS_TO_KELVIN(t) ((t)*10+2732) - struct thermal_attr { struct device_attribute attr; char name[THERMAL_NAME_LENGTH]; @@ -125,46 +166,61 @@ struct thermal_zone_device { int passive; unsigned int forced_passive; const struct thermal_zone_device_ops *ops; + const struct thermal_zone_params *tzp; + struct thermal_governor *governor; struct list_head thermal_instances; struct idr idr; struct mutex lock; /* protect thermal_instances list */ struct list_head node; struct delayed_work poll_queue; }; -/* Adding event notification support elements */ -#define THERMAL_GENL_FAMILY_NAME "thermal_event" -#define THERMAL_GENL_VERSION 0x01 -#define THERMAL_GENL_MCAST_GROUP_NAME "thermal_mc_group" -enum events { - THERMAL_AUX0, - THERMAL_AUX1, - THERMAL_CRITICAL, - THERMAL_DEV_FAULT, +/* Structure that holds thermal governor information */ +struct thermal_governor { + char name[THERMAL_NAME_LENGTH]; + int (*throttle)(struct thermal_zone_device *tz, int trip); + struct list_head governor_list; + struct module *owner; }; -struct thermal_genl_event { - u32 orig; - enum events event; +/* Structure that holds binding parameters for a zone */ +struct thermal_bind_params { + struct thermal_cooling_device *cdev; + + /* + * This is a measure of 'how effectively these devices can + * cool 'this' thermal zone. The shall be determined by platform + * characterization. This is on a 'percentage' scale. + * See Documentation/thermal/sysfs-api.txt for more information. + */ + int weight; + + /* + * This is a bit mask that gives the binding relation between this + * thermal zone and cdev, for a particular trip point. + * See Documentation/thermal/sysfs-api.txt for more information. + */ + int trip_mask; + int (*match) (struct thermal_zone_device *tz, + struct thermal_cooling_device *cdev); }; -/* attributes of thermal_genl_family */ -enum { - THERMAL_GENL_ATTR_UNSPEC, - THERMAL_GENL_ATTR_EVENT, - __THERMAL_GENL_ATTR_MAX, + +/* Structure to define Thermal Zone parameters */ +struct thermal_zone_params { + char governor_name[THERMAL_NAME_LENGTH]; + int num_tbps; /* Number of tbp entries */ + struct thermal_bind_params *tbp; }; -#define THERMAL_GENL_ATTR_MAX (__THERMAL_GENL_ATTR_MAX - 1) -/* commands supported by the thermal_genl_family */ -enum { - THERMAL_GENL_CMD_UNSPEC, - THERMAL_GENL_CMD_EVENT, - __THERMAL_GENL_CMD_MAX, +struct thermal_genl_event { + u32 orig; + enum events event; }; -#define THERMAL_GENL_CMD_MAX (__THERMAL_GENL_CMD_MAX - 1) +/* Function declarations */ struct thermal_zone_device *thermal_zone_device_register(const char *, int, int, - void *, const struct thermal_zone_device_ops *, int, int); + void *, const struct thermal_zone_device_ops *, + const struct thermal_zone_params *, int, int); void thermal_zone_device_unregister(struct thermal_zone_device *); int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int, @@ -173,10 +229,20 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int, int thermal_zone_unbind_cooling_device(struct thermal_zone_device *, int, struct thermal_cooling_device *); void thermal_zone_device_update(struct thermal_zone_device *); + struct thermal_cooling_device *thermal_cooling_device_register(char *, void *, const struct thermal_cooling_device_ops *); void thermal_cooling_device_unregister(struct thermal_cooling_device *); +int get_tz_trend(struct thermal_zone_device *, int); +struct thermal_instance *get_thermal_instance(struct thermal_zone_device *, + struct thermal_cooling_device *, int); +void thermal_cdev_update(struct thermal_cooling_device *); +void notify_thermal_framework(struct thermal_zone_device *, int); + +int thermal_register_governor(struct thermal_governor *); +void thermal_unregister_governor(struct thermal_governor *); + #ifdef CONFIG_NET extern int thermal_generate_netlink_event(u32 orig, enum events event); #else diff --git a/include/linux/thread_info.h b/include/linux/thread_info.h index ccc1899bd62e..e7e04736802f 100644 --- a/include/linux/thread_info.h +++ b/include/linux/thread_info.h @@ -61,6 +61,8 @@ extern long do_no_restart_syscall(struct restart_block *parm); # define THREADINFO_GFP (GFP_KERNEL | __GFP_NOTRACK) #endif +#define THREADINFO_GFP_ACCOUNTED (THREADINFO_GFP | __GFP_KMEMCG) + /* * flag set/clear/test wrappers * - pass TIF_xxxx constants to these functions diff --git a/include/linux/tick.h b/include/linux/tick.h index f37fceb69b73..1a6567b48492 100644 --- a/include/linux/tick.h +++ b/include/linux/tick.h @@ -142,4 +142,10 @@ static inline u64 get_cpu_idle_time_us(int cpu, u64 *unused) { return -1; } static inline u64 get_cpu_iowait_time_us(int cpu, u64 *unused) { return -1; } # endif /* !NO_HZ */ +# ifdef CONFIG_CPU_IDLE_GOV_MENU +extern void menu_hrtimer_cancel(void); +# else +static inline void menu_hrtimer_cancel(void) {} +# endif /* CONFIG_CPU_IDLE_GOV_MENU */ + #endif diff --git a/include/linux/timecompare.h b/include/linux/timecompare.h deleted file mode 100644 index 546e2234e4b3..000000000000 --- a/include/linux/timecompare.h +++ /dev/null @@ -1,125 +0,0 @@ -/* - * Utility code which helps transforming between two different time - * bases, called "source" and "target" time in this code. - * - * Source time has to be provided via the timecounter API while target - * time is accessed via a function callback whose prototype - * intentionally matches ktime_get() and ktime_get_real(). These - * interfaces where chosen like this so that the code serves its - * initial purpose without additional glue code. - * - * This purpose is synchronizing a hardware clock in a NIC with system - * time, in order to implement the Precision Time Protocol (PTP, - * IEEE1588) with more accurate hardware assisted time stamping. In - * that context only synchronization against system time (= - * ktime_get_real()) is currently needed. But this utility code might - * become useful in other situations, which is why it was written as - * general purpose utility code. - * - * The source timecounter is assumed to return monotonically - * increasing time (but this code does its best to compensate if that - * is not the case) whereas target time may jump. - * - * The target time corresponding to a source time is determined by - * reading target time, reading source time, reading target time - * again, then assuming that average target time corresponds to source - * time. In other words, the assumption is that reading the source - * time is slow and involves equal time for sending the request and - * receiving the reply, whereas reading target time is assumed to be - * fast. - * - * Copyright (C) 2009 Intel Corporation. - * Author: Patrick Ohly <patrick.ohly@intel.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - */ -#ifndef _LINUX_TIMECOMPARE_H -#define _LINUX_TIMECOMPARE_H - -#include <linux/clocksource.h> -#include <linux/ktime.h> - -/** - * struct timecompare - stores state and configuration for the two clocks - * - * Initialize to zero, then set source/target/num_samples. - * - * Transformation between source time and target time is done with: - * target_time = source_time + offset + - * (source_time - last_update) * skew / - * TIMECOMPARE_SKEW_RESOLUTION - * - * @source: used to get source time stamps via timecounter_read() - * @target: function returning target time (for example, ktime_get - * for monotonic time, or ktime_get_real for wall clock) - * @num_samples: number of times that source time and target time are to - * be compared when determining their offset - * @offset: (target time - source time) at the time of the last update - * @skew: average (target time - source time) / delta source time * - * TIMECOMPARE_SKEW_RESOLUTION - * @last_update: last source time stamp when time offset was measured - */ -struct timecompare { - struct timecounter *source; - ktime_t (*target)(void); - int num_samples; - - s64 offset; - s64 skew; - u64 last_update; -}; - -/** - * timecompare_transform - transform source time stamp into target time base - * @sync: context for time sync - * @source_tstamp: the result of timecounter_read() or - * timecounter_cyc2time() - */ -extern ktime_t timecompare_transform(struct timecompare *sync, - u64 source_tstamp); - -/** - * timecompare_offset - measure current (target time - source time) offset - * @sync: context for time sync - * @offset: average offset during sample period returned here - * @source_tstamp: average source time during sample period returned here - * - * Returns number of samples used. Might be zero (= no result) in the - * unlikely case that target time was monotonically decreasing for all - * samples (= broken). - */ -extern int timecompare_offset(struct timecompare *sync, - s64 *offset, - u64 *source_tstamp); - -extern void __timecompare_update(struct timecompare *sync, - u64 source_tstamp); - -/** - * timecompare_update - update offset and skew by measuring current offset - * @sync: context for time sync - * @source_tstamp: the result of timecounter_read() or - * timecounter_cyc2time(), pass zero to force update - * - * Updates are only done at most once per second. - */ -static inline void timecompare_update(struct timecompare *sync, - u64 source_tstamp) -{ - if (!source_tstamp || - (s64)(source_tstamp - sync->last_update) >= NSEC_PER_SEC) - __timecompare_update(sync, source_tstamp); -} - -#endif /* _LINUX_TIMECOMPARE_H */ diff --git a/include/linux/trace_clock.h b/include/linux/trace_clock.h index 4eb490237d4c..d563f37e1a1d 100644 --- a/include/linux/trace_clock.h +++ b/include/linux/trace_clock.h @@ -12,6 +12,8 @@ #include <linux/compiler.h> #include <linux/types.h> +#include <asm/trace_clock.h> + extern u64 notrace trace_clock_local(void); extern u64 notrace trace_clock(void); extern u64 notrace trace_clock_global(void); diff --git a/include/linux/tty.h b/include/linux/tty.h index f0b4eb47297c..8db1b569c37a 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -188,7 +188,9 @@ struct tty_port_operations { }; struct tty_port { + struct tty_bufhead buf; /* Locked internally */ struct tty_struct *tty; /* Back pointer */ + struct tty_struct *itty; /* internal back ptr */ const struct tty_port_operations *ops; /* Port operations */ spinlock_t lock; /* Lock protecting tty field */ int blocked_open; /* Waiting to open */ @@ -197,6 +199,9 @@ struct tty_port { wait_queue_head_t close_wait; /* Close waiters */ wait_queue_head_t delta_msr_wait; /* Modem status change */ unsigned long flags; /* TTY flags ASY_*/ + unsigned long iflags; /* TTYP_ internal flags */ +#define TTYP_FLUSHING 1 /* Flushing to ldisc in progress */ +#define TTYP_FLUSHPENDING 2 /* Queued buffer flush pending */ unsigned char console:1; /* port is a console */ struct mutex mutex; /* Locking */ struct mutex buf_mutex; /* Buffer alloc lock */ @@ -235,6 +240,7 @@ struct tty_struct { struct mutex ldisc_mutex; struct tty_ldisc *ldisc; + struct mutex atomic_write_lock; struct mutex legacy_mutex; struct mutex termios_mutex; spinlock_t ctrl_lock; @@ -254,7 +260,6 @@ struct tty_struct { struct tty_struct *link; struct fasync_struct *fasync; - struct tty_bufhead buf; /* Locked internally */ int alt_speed; /* For magic substitution of 38400 bps */ wait_queue_head_t write_wait; wait_queue_head_t read_wait; @@ -265,37 +270,10 @@ struct tty_struct { #define N_TTY_BUF_SIZE 4096 - /* - * The following is data for the N_TTY line discipline. For - * historical reasons, this is included in the tty structure. - * Mostly locked by the BKL. - */ - unsigned int column; - unsigned char lnext:1, erasing:1, raw:1, real_raw:1, icanon:1; unsigned char closing:1; - unsigned char echo_overrun:1; unsigned short minimum_to_wake; - unsigned long overrun_time; - int num_overrun; - unsigned long process_char_map[256/(8*sizeof(unsigned long))]; - char *read_buf; - int read_head; - int read_tail; - int read_cnt; - unsigned long read_flags[N_TTY_BUF_SIZE/(8*sizeof(unsigned long))]; - unsigned char *echo_buf; - unsigned int echo_pos; - unsigned int echo_cnt; - int canon_data; - unsigned long canon_head; - unsigned int canon_column; - struct mutex atomic_read_lock; - struct mutex atomic_write_lock; - struct mutex output_lock; - struct mutex echo_lock; unsigned char *write_buf; int write_cnt; - spinlock_t read_lock; /* If the tty has a pending do_SAK, queue it here - akpm */ struct work_struct SAK_work; struct tty_port *port; @@ -335,8 +313,6 @@ struct tty_file_private { #define TTY_PTY_LOCK 16 /* pty private */ #define TTY_NO_WRITE_SPLIT 17 /* Preserve write boundaries to driver */ #define TTY_HUPPED 18 /* Post driver->hangup() */ -#define TTY_FLUSHING 19 /* Flushing to ldisc in progress */ -#define TTY_FLUSHPENDING 20 /* Queued buffer flush pending */ #define TTY_HUPPING 21 /* ->hangup() in progress */ #define TTY_WRITE_FLUSH(tty) tty_write_flush((tty)) @@ -412,9 +388,9 @@ extern void disassociate_ctty(int priv); extern void no_tty(void); extern void tty_flip_buffer_push(struct tty_struct *tty); extern void tty_flush_to_ldisc(struct tty_struct *tty); -extern void tty_buffer_free_all(struct tty_struct *tty); +extern void tty_buffer_free_all(struct tty_port *port); extern void tty_buffer_flush(struct tty_struct *tty); -extern void tty_buffer_init(struct tty_struct *tty); +extern void tty_buffer_init(struct tty_port *port); extern speed_t tty_get_baud_rate(struct tty_struct *tty); extern speed_t tty_termios_baud_rate(struct ktermios *termios); extern speed_t tty_termios_input_baud_rate(struct ktermios *termios); @@ -479,6 +455,7 @@ extern struct device *tty_port_register_device_attr(struct tty_port *port, const struct attribute_group **attr_grp); extern int tty_port_alloc_xmit_buf(struct tty_port *port); extern void tty_port_free_xmit_buf(struct tty_port *port); +extern void tty_port_destroy(struct tty_port *port); extern void tty_port_put(struct tty_port *port); static inline struct tty_port *tty_port_get(struct tty_port *port) @@ -535,7 +512,7 @@ extern void n_tty_inherit_ops(struct tty_ldisc_ops *ops); /* tty_audit.c */ #ifdef CONFIG_AUDIT extern void tty_audit_add_data(struct tty_struct *tty, unsigned char *data, - size_t size); + size_t size, unsigned icanon); extern void tty_audit_exit(void); extern void tty_audit_fork(struct signal_struct *sig); extern void tty_audit_tiocsti(struct tty_struct *tty, char ch); @@ -544,7 +521,7 @@ extern int tty_audit_push_task(struct task_struct *tsk, kuid_t loginuid, u32 sessionid); #else static inline void tty_audit_add_data(struct tty_struct *tty, - unsigned char *data, size_t size) + unsigned char *data, size_t size, unsigned icanon) { } static inline void tty_audit_tiocsti(struct tty_struct *tty, char ch) diff --git a/include/linux/tty_flip.h b/include/linux/tty_flip.h index 9239d033a0a3..2002344ed36a 100644 --- a/include/linux/tty_flip.h +++ b/include/linux/tty_flip.h @@ -11,7 +11,7 @@ void tty_schedule_flip(struct tty_struct *tty); static inline int tty_insert_flip_char(struct tty_struct *tty, unsigned char ch, char flag) { - struct tty_buffer *tb = tty->buf.tail; + struct tty_buffer *tb = tty->port->buf.tail; if (tb && tb->used < tb->size) { tb->flag_buf_ptr[tb->used] = flag; tb->char_buf_ptr[tb->used++] = ch; diff --git a/include/linux/types.h b/include/linux/types.h index 1cc0e4b9a048..4d118ba11349 100644 --- a/include/linux/types.h +++ b/include/linux/types.h @@ -156,6 +156,7 @@ typedef u32 dma_addr_t; #endif typedef unsigned __bitwise__ gfp_t; typedef unsigned __bitwise__ fmode_t; +typedef unsigned __bitwise__ oom_flags_t; #ifdef CONFIG_PHYS_ADDR_T_64BIT typedef u64 phys_addr_t; diff --git a/include/linux/udp.h b/include/linux/udp.h index 0b67d7793520..9d81de123c90 100644 --- a/include/linux/udp.h +++ b/include/linux/udp.h @@ -27,6 +27,11 @@ static inline struct udphdr *udp_hdr(const struct sk_buff *skb) return (struct udphdr *)skb_transport_header(skb); } +static inline struct udphdr *inner_udp_hdr(const struct sk_buff *skb) +{ + return (struct udphdr *)skb_inner_transport_header(skb); +} + #define UDP_HTABLE_SIZE_MIN (CONFIG_BASE_SMALL ? 128 : 256) static inline int udp_hashfn(struct net *net, unsigned num, unsigned mask) diff --git a/include/linux/uprobes.h b/include/linux/uprobes.h index e6f0331e3d45..4f628a6fc5b4 100644 --- a/include/linux/uprobes.h +++ b/include/linux/uprobes.h @@ -35,16 +35,6 @@ struct inode; # include <asm/uprobes.h> #endif -/* flags that denote/change uprobes behaviour */ - -/* Have a copy of original instruction */ -#define UPROBE_COPY_INSN 0x1 - -/* Dont run handlers when first register/ last unregister in progress*/ -#define UPROBE_RUN_HANDLER 0x2 -/* Can skip singlestep */ -#define UPROBE_SKIP_SSTEP 0x4 - struct uprobe_consumer { int (*handler)(struct uprobe_consumer *self, struct pt_regs *regs); /* @@ -59,7 +49,6 @@ struct uprobe_consumer { #ifdef CONFIG_UPROBES enum uprobe_task_state { UTASK_RUNNING, - UTASK_BP_HIT, UTASK_SSTEP, UTASK_SSTEP_ACK, UTASK_SSTEP_TRAPPED, @@ -108,12 +97,12 @@ extern int uprobe_register(struct inode *inode, loff_t offset, struct uprobe_con extern void uprobe_unregister(struct inode *inode, loff_t offset, struct uprobe_consumer *uc); extern int uprobe_mmap(struct vm_area_struct *vma); extern void uprobe_munmap(struct vm_area_struct *vma, unsigned long start, unsigned long end); +extern void uprobe_start_dup_mmap(void); +extern void uprobe_end_dup_mmap(void); extern void uprobe_dup_mmap(struct mm_struct *oldmm, struct mm_struct *newmm); extern void uprobe_free_utask(struct task_struct *t); extern void uprobe_copy_process(struct task_struct *t); extern unsigned long __weak uprobe_get_swbp_addr(struct pt_regs *regs); -extern void __weak arch_uprobe_enable_step(struct arch_uprobe *arch); -extern void __weak arch_uprobe_disable_step(struct arch_uprobe *arch); extern int uprobe_post_sstep_notifier(struct pt_regs *regs); extern int uprobe_pre_sstep_notifier(struct pt_regs *regs); extern void uprobe_notify_resume(struct pt_regs *regs); @@ -140,6 +129,12 @@ static inline void uprobe_munmap(struct vm_area_struct *vma, unsigned long start, unsigned long end) { } +static inline void uprobe_start_dup_mmap(void) +{ +} +static inline void uprobe_end_dup_mmap(void) +{ +} static inline void uprobe_dup_mmap(struct mm_struct *oldmm, struct mm_struct *newmm) { diff --git a/include/linux/usb.h b/include/linux/usb.h index 07915a32fb9d..689b14b26c8d 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -482,6 +482,7 @@ struct usb3_lpm_parameters { * @connect_time: time device was first connected * @do_remote_wakeup: remote wakeup should be enabled * @reset_resume: needs reset instead of resume + * @port_is_suspended: the upstream port is suspended (L2 or U3) * @wusb_dev: if this is a Wireless USB device, link to the WUSB * specific data for the device. * @slot_id: Slot ID assigned by xHCI @@ -560,6 +561,7 @@ struct usb_device { unsigned do_remote_wakeup:1; unsigned reset_resume:1; + unsigned port_is_suspended:1; #endif struct wusb_dev *wusb_dev; int slot_id; @@ -588,8 +590,9 @@ extern struct usb_device *usb_hub_find_child(struct usb_device *hdev, */ #define usb_hub_for_each_child(hdev, port1, child) \ for (port1 = 1, child = usb_hub_find_child(hdev, port1); \ - port1 <= hdev->maxchild; \ - child = usb_hub_find_child(hdev, ++port1)) + port1 <= hdev->maxchild; \ + child = usb_hub_find_child(hdev, ++port1)) \ + if (!child) continue; else /* USB device locking */ #define usb_lock_device(udev) device_lock(&(udev)->dev) @@ -805,6 +808,22 @@ static inline int usb_make_path(struct usb_device *dev, char *buf, size_t size) .bcdDevice_hi = (hi) /** + * USB_DEVICE_INTERFACE_CLASS - describe a usb device with a specific interface class + * @vend: the 16 bit USB Vendor ID + * @prod: the 16 bit USB Product ID + * @cl: bInterfaceClass value + * + * This macro is used to create a struct usb_device_id that matches a + * specific interface class of devices. + */ +#define USB_DEVICE_INTERFACE_CLASS(vend, prod, cl) \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ + USB_DEVICE_ID_MATCH_INT_CLASS, \ + .idVendor = (vend), \ + .idProduct = (prod), \ + .bInterfaceClass = (cl) + +/** * USB_DEVICE_INTERFACE_PROTOCOL - describe a usb device with a specific interface protocol * @vend: the 16 bit USB Vendor ID * @prod: the 16 bit USB Product ID @@ -1129,8 +1148,8 @@ extern int usb_disabled(void); * Note: URB_DIR_IN/OUT is automatically set in usb_submit_urb(). */ #define URB_SHORT_NOT_OK 0x0001 /* report short reads as errors */ -#define URB_ISO_ASAP 0x0002 /* iso-only, urb->start_frame - * ignored */ +#define URB_ISO_ASAP 0x0002 /* iso-only; use the first unexpired + * slot in the schedule */ #define URB_NO_TRANSFER_DMA_MAP 0x0004 /* urb->transfer_dma valid on submit */ #define URB_NO_FSBR 0x0020 /* UHCI-specific */ #define URB_ZERO_PACKET 0x0040 /* Finish bulk OUT with short packet */ @@ -1309,15 +1328,20 @@ typedef void (*usb_complete_t)(struct urb *); * the transfer interval in the endpoint descriptor is logarithmic. * Device drivers must convert that value to linear units themselves.) * - * Isochronous URBs normally use the URB_ISO_ASAP transfer flag, telling - * the host controller to schedule the transfer as soon as bandwidth - * utilization allows, and then set start_frame to reflect the actual frame - * selected during submission. Otherwise drivers must specify the start_frame - * and handle the case where the transfer can't begin then. However, drivers - * won't know how bandwidth is currently allocated, and while they can - * find the current frame using usb_get_current_frame_number () they can't - * know the range for that frame number. (Ranges for frame counter values - * are HC-specific, and can go from 256 to 65536 frames from "now".) + * If an isochronous endpoint queue isn't already running, the host + * controller will schedule a new URB to start as soon as bandwidth + * utilization allows. If the queue is running then a new URB will be + * scheduled to start in the first transfer slot following the end of the + * preceding URB, if that slot has not already expired. If the slot has + * expired (which can happen when IRQ delivery is delayed for a long time), + * the scheduling behavior depends on the URB_ISO_ASAP flag. If the flag + * is clear then the URB will be scheduled to start in the expired slot, + * implying that some of its packets will not be transferred; if the flag + * is set then the URB will be scheduled in the first unexpired slot, + * breaking the queue's synchronization. Upon URB completion, the + * start_frame field will be set to the (micro)frame number in which the + * transfer was scheduled. Ranges for frame counter values are HC-specific + * and can go from as low as 256 to as high as 65536 frames. * * Isochronous URBs have a different data transfer model, in part because * the quality of service is only "best effort". Callers provide specially @@ -1778,17 +1802,6 @@ static inline int usb_translate_errors(int error_code) extern void usb_register_notify(struct notifier_block *nb); extern void usb_unregister_notify(struct notifier_block *nb); -#ifdef DEBUG -#define dbg(format, arg...) \ - printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg) -#else -#define dbg(format, arg...) \ -do { \ - if (0) \ - printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg); \ -} while (0) -#endif - /* debugfs stuff */ extern struct dentry *usb_debug_root; diff --git a/include/linux/usb/Kbuild b/include/linux/usb/Kbuild index b607f3532e88..e69de29bb2d1 100644 --- a/include/linux/usb/Kbuild +++ b/include/linux/usb/Kbuild @@ -1,10 +0,0 @@ -header-y += audio.h -header-y += cdc.h -header-y += ch9.h -header-y += ch11.h -header-y += functionfs.h -header-y += gadgetfs.h -header-y += midi.h -header-y += g_printer.h -header-y += tmc.h -header-y += video.h diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h index a54b8255d75f..3d84619110a4 100644 --- a/include/linux/usb/audio.h +++ b/include/linux/usb/audio.h @@ -17,531 +17,11 @@ * Types and defines in this file are either specific to version 1.0 of * this standard or common for newer versions. */ - #ifndef __LINUX_USB_AUDIO_H #define __LINUX_USB_AUDIO_H -#include <linux/types.h> - -/* bInterfaceProtocol values to denote the version of the standard used */ -#define UAC_VERSION_1 0x00 -#define UAC_VERSION_2 0x20 - -/* A.2 Audio Interface Subclass Codes */ -#define USB_SUBCLASS_AUDIOCONTROL 0x01 -#define USB_SUBCLASS_AUDIOSTREAMING 0x02 -#define USB_SUBCLASS_MIDISTREAMING 0x03 - -/* A.5 Audio Class-Specific AC Interface Descriptor Subtypes */ -#define UAC_HEADER 0x01 -#define UAC_INPUT_TERMINAL 0x02 -#define UAC_OUTPUT_TERMINAL 0x03 -#define UAC_MIXER_UNIT 0x04 -#define UAC_SELECTOR_UNIT 0x05 -#define UAC_FEATURE_UNIT 0x06 -#define UAC1_PROCESSING_UNIT 0x07 -#define UAC1_EXTENSION_UNIT 0x08 - -/* A.6 Audio Class-Specific AS Interface Descriptor Subtypes */ -#define UAC_AS_GENERAL 0x01 -#define UAC_FORMAT_TYPE 0x02 -#define UAC_FORMAT_SPECIFIC 0x03 - -/* A.7 Processing Unit Process Types */ -#define UAC_PROCESS_UNDEFINED 0x00 -#define UAC_PROCESS_UP_DOWNMIX 0x01 -#define UAC_PROCESS_DOLBY_PROLOGIC 0x02 -#define UAC_PROCESS_STEREO_EXTENDER 0x03 -#define UAC_PROCESS_REVERB 0x04 -#define UAC_PROCESS_CHORUS 0x05 -#define UAC_PROCESS_DYN_RANGE_COMP 0x06 - -/* A.8 Audio Class-Specific Endpoint Descriptor Subtypes */ -#define UAC_EP_GENERAL 0x01 - -/* A.9 Audio Class-Specific Request Codes */ -#define UAC_SET_ 0x00 -#define UAC_GET_ 0x80 - -#define UAC__CUR 0x1 -#define UAC__MIN 0x2 -#define UAC__MAX 0x3 -#define UAC__RES 0x4 -#define UAC__MEM 0x5 - -#define UAC_SET_CUR (UAC_SET_ | UAC__CUR) -#define UAC_GET_CUR (UAC_GET_ | UAC__CUR) -#define UAC_SET_MIN (UAC_SET_ | UAC__MIN) -#define UAC_GET_MIN (UAC_GET_ | UAC__MIN) -#define UAC_SET_MAX (UAC_SET_ | UAC__MAX) -#define UAC_GET_MAX (UAC_GET_ | UAC__MAX) -#define UAC_SET_RES (UAC_SET_ | UAC__RES) -#define UAC_GET_RES (UAC_GET_ | UAC__RES) -#define UAC_SET_MEM (UAC_SET_ | UAC__MEM) -#define UAC_GET_MEM (UAC_GET_ | UAC__MEM) - -#define UAC_GET_STAT 0xff - -/* A.10 Control Selector Codes */ - -/* A.10.1 Terminal Control Selectors */ -#define UAC_TERM_COPY_PROTECT 0x01 - -/* A.10.2 Feature Unit Control Selectors */ -#define UAC_FU_MUTE 0x01 -#define UAC_FU_VOLUME 0x02 -#define UAC_FU_BASS 0x03 -#define UAC_FU_MID 0x04 -#define UAC_FU_TREBLE 0x05 -#define UAC_FU_GRAPHIC_EQUALIZER 0x06 -#define UAC_FU_AUTOMATIC_GAIN 0x07 -#define UAC_FU_DELAY 0x08 -#define UAC_FU_BASS_BOOST 0x09 -#define UAC_FU_LOUDNESS 0x0a - -#define UAC_CONTROL_BIT(CS) (1 << ((CS) - 1)) - -/* A.10.3.1 Up/Down-mix Processing Unit Controls Selectors */ -#define UAC_UD_ENABLE 0x01 -#define UAC_UD_MODE_SELECT 0x02 - -/* A.10.3.2 Dolby Prologic (tm) Processing Unit Controls Selectors */ -#define UAC_DP_ENABLE 0x01 -#define UAC_DP_MODE_SELECT 0x02 - -/* A.10.3.3 3D Stereo Extender Processing Unit Control Selectors */ -#define UAC_3D_ENABLE 0x01 -#define UAC_3D_SPACE 0x02 - -/* A.10.3.4 Reverberation Processing Unit Control Selectors */ -#define UAC_REVERB_ENABLE 0x01 -#define UAC_REVERB_LEVEL 0x02 -#define UAC_REVERB_TIME 0x03 -#define UAC_REVERB_FEEDBACK 0x04 - -/* A.10.3.5 Chorus Processing Unit Control Selectors */ -#define UAC_CHORUS_ENABLE 0x01 -#define UAC_CHORUS_LEVEL 0x02 -#define UAC_CHORUS_RATE 0x03 -#define UAC_CHORUS_DEPTH 0x04 - -/* A.10.3.6 Dynamic Range Compressor Unit Control Selectors */ -#define UAC_DCR_ENABLE 0x01 -#define UAC_DCR_RATE 0x02 -#define UAC_DCR_MAXAMPL 0x03 -#define UAC_DCR_THRESHOLD 0x04 -#define UAC_DCR_ATTACK_TIME 0x05 -#define UAC_DCR_RELEASE_TIME 0x06 - -/* A.10.4 Extension Unit Control Selectors */ -#define UAC_XU_ENABLE 0x01 - -/* MIDI - A.1 MS Class-Specific Interface Descriptor Subtypes */ -#define UAC_MS_HEADER 0x01 -#define UAC_MIDI_IN_JACK 0x02 -#define UAC_MIDI_OUT_JACK 0x03 - -/* MIDI - A.1 MS Class-Specific Endpoint Descriptor Subtypes */ -#define UAC_MS_GENERAL 0x01 - -/* Terminals - 2.1 USB Terminal Types */ -#define UAC_TERMINAL_UNDEFINED 0x100 -#define UAC_TERMINAL_STREAMING 0x101 -#define UAC_TERMINAL_VENDOR_SPEC 0x1FF - -/* Terminal Control Selectors */ -/* 4.3.2 Class-Specific AC Interface Descriptor */ -struct uac1_ac_header_descriptor { - __u8 bLength; /* 8 + n */ - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* UAC_MS_HEADER */ - __le16 bcdADC; /* 0x0100 */ - __le16 wTotalLength; /* includes Unit and Terminal desc. */ - __u8 bInCollection; /* n */ - __u8 baInterfaceNr[]; /* [n] */ -} __attribute__ ((packed)); - -#define UAC_DT_AC_HEADER_SIZE(n) (8 + (n)) - -/* As above, but more useful for defining your own descriptors: */ -#define DECLARE_UAC_AC_HEADER_DESCRIPTOR(n) \ -struct uac1_ac_header_descriptor_##n { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubtype; \ - __le16 bcdADC; \ - __le16 wTotalLength; \ - __u8 bInCollection; \ - __u8 baInterfaceNr[n]; \ -} __attribute__ ((packed)) - -/* 4.3.2.1 Input Terminal Descriptor */ -struct uac_input_terminal_descriptor { - __u8 bLength; /* in bytes: 12 */ - __u8 bDescriptorType; /* CS_INTERFACE descriptor type */ - __u8 bDescriptorSubtype; /* INPUT_TERMINAL descriptor subtype */ - __u8 bTerminalID; /* Constant uniquely terminal ID */ - __le16 wTerminalType; /* USB Audio Terminal Types */ - __u8 bAssocTerminal; /* ID of the Output Terminal associated */ - __u8 bNrChannels; /* Number of logical output channels */ - __le16 wChannelConfig; - __u8 iChannelNames; - __u8 iTerminal; -} __attribute__ ((packed)); - -#define UAC_DT_INPUT_TERMINAL_SIZE 12 - -/* Terminals - 2.2 Input Terminal Types */ -#define UAC_INPUT_TERMINAL_UNDEFINED 0x200 -#define UAC_INPUT_TERMINAL_MICROPHONE 0x201 -#define UAC_INPUT_TERMINAL_DESKTOP_MICROPHONE 0x202 -#define UAC_INPUT_TERMINAL_PERSONAL_MICROPHONE 0x203 -#define UAC_INPUT_TERMINAL_OMNI_DIR_MICROPHONE 0x204 -#define UAC_INPUT_TERMINAL_MICROPHONE_ARRAY 0x205 -#define UAC_INPUT_TERMINAL_PROC_MICROPHONE_ARRAY 0x206 - -/* Terminals - control selectors */ - -#define UAC_TERMINAL_CS_COPY_PROTECT_CONTROL 0x01 - -/* 4.3.2.2 Output Terminal Descriptor */ -struct uac1_output_terminal_descriptor { - __u8 bLength; /* in bytes: 9 */ - __u8 bDescriptorType; /* CS_INTERFACE descriptor type */ - __u8 bDescriptorSubtype; /* OUTPUT_TERMINAL descriptor subtype */ - __u8 bTerminalID; /* Constant uniquely terminal ID */ - __le16 wTerminalType; /* USB Audio Terminal Types */ - __u8 bAssocTerminal; /* ID of the Input Terminal associated */ - __u8 bSourceID; /* ID of the connected Unit or Terminal*/ - __u8 iTerminal; -} __attribute__ ((packed)); - -#define UAC_DT_OUTPUT_TERMINAL_SIZE 9 - -/* Terminals - 2.3 Output Terminal Types */ -#define UAC_OUTPUT_TERMINAL_UNDEFINED 0x300 -#define UAC_OUTPUT_TERMINAL_SPEAKER 0x301 -#define UAC_OUTPUT_TERMINAL_HEADPHONES 0x302 -#define UAC_OUTPUT_TERMINAL_HEAD_MOUNTED_DISPLAY_AUDIO 0x303 -#define UAC_OUTPUT_TERMINAL_DESKTOP_SPEAKER 0x304 -#define UAC_OUTPUT_TERMINAL_ROOM_SPEAKER 0x305 -#define UAC_OUTPUT_TERMINAL_COMMUNICATION_SPEAKER 0x306 -#define UAC_OUTPUT_TERMINAL_LOW_FREQ_EFFECTS_SPEAKER 0x307 - -/* Set bControlSize = 2 as default setting */ -#define UAC_DT_FEATURE_UNIT_SIZE(ch) (7 + ((ch) + 1) * 2) - -/* As above, but more useful for defining your own descriptors: */ -#define DECLARE_UAC_FEATURE_UNIT_DESCRIPTOR(ch) \ -struct uac_feature_unit_descriptor_##ch { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubtype; \ - __u8 bUnitID; \ - __u8 bSourceID; \ - __u8 bControlSize; \ - __le16 bmaControls[ch + 1]; \ - __u8 iFeature; \ -} __attribute__ ((packed)) - -/* 4.3.2.3 Mixer Unit Descriptor */ -struct uac_mixer_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bUnitID; - __u8 bNrInPins; - __u8 baSourceID[]; -} __attribute__ ((packed)); +#include <uapi/linux/usb/audio.h> -static inline __u8 uac_mixer_unit_bNrChannels(struct uac_mixer_unit_descriptor *desc) -{ - return desc->baSourceID[desc->bNrInPins]; -} - -static inline __u32 uac_mixer_unit_wChannelConfig(struct uac_mixer_unit_descriptor *desc, - int protocol) -{ - if (protocol == UAC_VERSION_1) - return (desc->baSourceID[desc->bNrInPins + 2] << 8) | - desc->baSourceID[desc->bNrInPins + 1]; - else - return (desc->baSourceID[desc->bNrInPins + 4] << 24) | - (desc->baSourceID[desc->bNrInPins + 3] << 16) | - (desc->baSourceID[desc->bNrInPins + 2] << 8) | - (desc->baSourceID[desc->bNrInPins + 1]); -} - -static inline __u8 uac_mixer_unit_iChannelNames(struct uac_mixer_unit_descriptor *desc, - int protocol) -{ - return (protocol == UAC_VERSION_1) ? - desc->baSourceID[desc->bNrInPins + 3] : - desc->baSourceID[desc->bNrInPins + 5]; -} - -static inline __u8 *uac_mixer_unit_bmControls(struct uac_mixer_unit_descriptor *desc, - int protocol) -{ - return (protocol == UAC_VERSION_1) ? - &desc->baSourceID[desc->bNrInPins + 4] : - &desc->baSourceID[desc->bNrInPins + 6]; -} - -static inline __u8 uac_mixer_unit_iMixer(struct uac_mixer_unit_descriptor *desc) -{ - __u8 *raw = (__u8 *) desc; - return raw[desc->bLength - 1]; -} - -/* 4.3.2.4 Selector Unit Descriptor */ -struct uac_selector_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bUintID; - __u8 bNrInPins; - __u8 baSourceID[]; -} __attribute__ ((packed)); - -static inline __u8 uac_selector_unit_iSelector(struct uac_selector_unit_descriptor *desc) -{ - __u8 *raw = (__u8 *) desc; - return raw[desc->bLength - 1]; -} - -/* 4.3.2.5 Feature Unit Descriptor */ -struct uac_feature_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bUnitID; - __u8 bSourceID; - __u8 bControlSize; - __u8 bmaControls[0]; /* variable length */ -} __attribute__((packed)); - -static inline __u8 uac_feature_unit_iFeature(struct uac_feature_unit_descriptor *desc) -{ - __u8 *raw = (__u8 *) desc; - return raw[desc->bLength - 1]; -} - -/* 4.3.2.6 Processing Unit Descriptors */ -struct uac_processing_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bUnitID; - __u16 wProcessType; - __u8 bNrInPins; - __u8 baSourceID[]; -} __attribute__ ((packed)); - -static inline __u8 uac_processing_unit_bNrChannels(struct uac_processing_unit_descriptor *desc) -{ - return desc->baSourceID[desc->bNrInPins]; -} - -static inline __u32 uac_processing_unit_wChannelConfig(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - if (protocol == UAC_VERSION_1) - return (desc->baSourceID[desc->bNrInPins + 2] << 8) | - desc->baSourceID[desc->bNrInPins + 1]; - else - return (desc->baSourceID[desc->bNrInPins + 4] << 24) | - (desc->baSourceID[desc->bNrInPins + 3] << 16) | - (desc->baSourceID[desc->bNrInPins + 2] << 8) | - (desc->baSourceID[desc->bNrInPins + 1]); -} - -static inline __u8 uac_processing_unit_iChannelNames(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - return (protocol == UAC_VERSION_1) ? - desc->baSourceID[desc->bNrInPins + 3] : - desc->baSourceID[desc->bNrInPins + 5]; -} - -static inline __u8 uac_processing_unit_bControlSize(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - return (protocol == UAC_VERSION_1) ? - desc->baSourceID[desc->bNrInPins + 4] : - desc->baSourceID[desc->bNrInPins + 6]; -} - -static inline __u8 *uac_processing_unit_bmControls(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - return (protocol == UAC_VERSION_1) ? - &desc->baSourceID[desc->bNrInPins + 5] : - &desc->baSourceID[desc->bNrInPins + 7]; -} - -static inline __u8 uac_processing_unit_iProcessing(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - __u8 control_size = uac_processing_unit_bControlSize(desc, protocol); - return desc->baSourceID[desc->bNrInPins + control_size]; -} - -static inline __u8 *uac_processing_unit_specific(struct uac_processing_unit_descriptor *desc, - int protocol) -{ - __u8 control_size = uac_processing_unit_bControlSize(desc, protocol); - return &desc->baSourceID[desc->bNrInPins + control_size + 1]; -} - -/* 4.5.2 Class-Specific AS Interface Descriptor */ -struct uac1_as_header_descriptor { - __u8 bLength; /* in bytes: 7 */ - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* AS_GENERAL */ - __u8 bTerminalLink; /* Terminal ID of connected Terminal */ - __u8 bDelay; /* Delay introduced by the data path */ - __le16 wFormatTag; /* The Audio Data Format */ -} __attribute__ ((packed)); - -#define UAC_DT_AS_HEADER_SIZE 7 - -/* Formats - A.1.1 Audio Data Format Type I Codes */ -#define UAC_FORMAT_TYPE_I_UNDEFINED 0x0 -#define UAC_FORMAT_TYPE_I_PCM 0x1 -#define UAC_FORMAT_TYPE_I_PCM8 0x2 -#define UAC_FORMAT_TYPE_I_IEEE_FLOAT 0x3 -#define UAC_FORMAT_TYPE_I_ALAW 0x4 -#define UAC_FORMAT_TYPE_I_MULAW 0x5 - -struct uac_format_type_i_continuous_descriptor { - __u8 bLength; /* in bytes: 8 + (ns * 3) */ - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* FORMAT_TYPE */ - __u8 bFormatType; /* FORMAT_TYPE_1 */ - __u8 bNrChannels; /* physical channels in the stream */ - __u8 bSubframeSize; /* */ - __u8 bBitResolution; - __u8 bSamFreqType; - __u8 tLowerSamFreq[3]; - __u8 tUpperSamFreq[3]; -} __attribute__ ((packed)); - -#define UAC_FORMAT_TYPE_I_CONTINUOUS_DESC_SIZE 14 - -struct uac_format_type_i_discrete_descriptor { - __u8 bLength; /* in bytes: 8 + (ns * 3) */ - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* FORMAT_TYPE */ - __u8 bFormatType; /* FORMAT_TYPE_1 */ - __u8 bNrChannels; /* physical channels in the stream */ - __u8 bSubframeSize; /* */ - __u8 bBitResolution; - __u8 bSamFreqType; - __u8 tSamFreq[][3]; -} __attribute__ ((packed)); - -#define DECLARE_UAC_FORMAT_TYPE_I_DISCRETE_DESC(n) \ -struct uac_format_type_i_discrete_descriptor_##n { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubtype; \ - __u8 bFormatType; \ - __u8 bNrChannels; \ - __u8 bSubframeSize; \ - __u8 bBitResolution; \ - __u8 bSamFreqType; \ - __u8 tSamFreq[n][3]; \ -} __attribute__ ((packed)) - -#define UAC_FORMAT_TYPE_I_DISCRETE_DESC_SIZE(n) (8 + (n * 3)) - -struct uac_format_type_i_ext_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bFormatType; - __u8 bSubslotSize; - __u8 bBitResolution; - __u8 bHeaderLength; - __u8 bControlSize; - __u8 bSideBandProtocol; -} __attribute__((packed)); - -/* Formats - Audio Data Format Type I Codes */ - -#define UAC_FORMAT_TYPE_II_MPEG 0x1001 -#define UAC_FORMAT_TYPE_II_AC3 0x1002 - -struct uac_format_type_ii_discrete_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bFormatType; - __le16 wMaxBitRate; - __le16 wSamplesPerFrame; - __u8 bSamFreqType; - __u8 tSamFreq[][3]; -} __attribute__((packed)); - -struct uac_format_type_ii_ext_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u8 bFormatType; - __u16 wMaxBitRate; - __u16 wSamplesPerFrame; - __u8 bHeaderLength; - __u8 bSideBandProtocol; -} __attribute__((packed)); - -/* type III */ -#define UAC_FORMAT_TYPE_III_IEC1937_AC3 0x2001 -#define UAC_FORMAT_TYPE_III_IEC1937_MPEG1_LAYER1 0x2002 -#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_NOEXT 0x2003 -#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_EXT 0x2004 -#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER1_LS 0x2005 -#define UAC_FORMAT_TYPE_III_IEC1937_MPEG2_LAYER23_LS 0x2006 - -/* Formats - A.2 Format Type Codes */ -#define UAC_FORMAT_TYPE_UNDEFINED 0x0 -#define UAC_FORMAT_TYPE_I 0x1 -#define UAC_FORMAT_TYPE_II 0x2 -#define UAC_FORMAT_TYPE_III 0x3 -#define UAC_EXT_FORMAT_TYPE_I 0x81 -#define UAC_EXT_FORMAT_TYPE_II 0x82 -#define UAC_EXT_FORMAT_TYPE_III 0x83 - -struct uac_iso_endpoint_descriptor { - __u8 bLength; /* in bytes: 7 */ - __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */ - __u8 bDescriptorSubtype; /* EP_GENERAL */ - __u8 bmAttributes; - __u8 bLockDelayUnits; - __le16 wLockDelay; -} __attribute__((packed)); -#define UAC_ISO_ENDPOINT_DESC_SIZE 7 - -#define UAC_EP_CS_ATTR_SAMPLE_RATE 0x01 -#define UAC_EP_CS_ATTR_PITCH_CONTROL 0x02 -#define UAC_EP_CS_ATTR_FILL_MAX 0x80 - -/* status word format (3.7.1.1) */ - -#define UAC1_STATUS_TYPE_ORIG_MASK 0x0f -#define UAC1_STATUS_TYPE_ORIG_AUDIO_CONTROL_IF 0x0 -#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_IF 0x1 -#define UAC1_STATUS_TYPE_ORIG_AUDIO_STREAM_EP 0x2 - -#define UAC1_STATUS_TYPE_IRQ_PENDING (1 << 7) -#define UAC1_STATUS_TYPE_MEM_CHANGED (1 << 6) - -struct uac1_status_word { - __u8 bStatusType; - __u8 bOriginator; -} __attribute__((packed)); - -#ifdef __KERNEL__ struct usb_audio_control { struct list_head list; @@ -561,6 +41,4 @@ struct usb_audio_control_selector { struct usb_descriptor_header *desc; }; -#endif /* __KERNEL__ */ - #endif /* __LINUX_USB_AUDIO_H */ diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h deleted file mode 100644 index 81a927930bfd..000000000000 --- a/include/linux/usb/cdc.h +++ /dev/null @@ -1,412 +0,0 @@ -/* - * USB Communications Device Class (CDC) definitions - * - * CDC says how to talk to lots of different types of network adapters, - * notably ethernet adapters and various modems. It's used mostly with - * firmware based USB peripherals. - */ - -#ifndef __LINUX_USB_CDC_H -#define __LINUX_USB_CDC_H - -#include <linux/types.h> - -#define USB_CDC_SUBCLASS_ACM 0x02 -#define USB_CDC_SUBCLASS_ETHERNET 0x06 -#define USB_CDC_SUBCLASS_WHCM 0x08 -#define USB_CDC_SUBCLASS_DMM 0x09 -#define USB_CDC_SUBCLASS_MDLM 0x0a -#define USB_CDC_SUBCLASS_OBEX 0x0b -#define USB_CDC_SUBCLASS_EEM 0x0c -#define USB_CDC_SUBCLASS_NCM 0x0d - -#define USB_CDC_PROTO_NONE 0 - -#define USB_CDC_ACM_PROTO_AT_V25TER 1 -#define USB_CDC_ACM_PROTO_AT_PCCA101 2 -#define USB_CDC_ACM_PROTO_AT_PCCA101_WAKE 3 -#define USB_CDC_ACM_PROTO_AT_GSM 4 -#define USB_CDC_ACM_PROTO_AT_3G 5 -#define USB_CDC_ACM_PROTO_AT_CDMA 6 -#define USB_CDC_ACM_PROTO_VENDOR 0xff - -#define USB_CDC_PROTO_EEM 7 - -#define USB_CDC_NCM_PROTO_NTB 1 - -/*-------------------------------------------------------------------------*/ - -/* - * Class-Specific descriptors ... there are a couple dozen of them - */ - -#define USB_CDC_HEADER_TYPE 0x00 /* header_desc */ -#define USB_CDC_CALL_MANAGEMENT_TYPE 0x01 /* call_mgmt_descriptor */ -#define USB_CDC_ACM_TYPE 0x02 /* acm_descriptor */ -#define USB_CDC_UNION_TYPE 0x06 /* union_desc */ -#define USB_CDC_COUNTRY_TYPE 0x07 -#define USB_CDC_NETWORK_TERMINAL_TYPE 0x0a /* network_terminal_desc */ -#define USB_CDC_ETHERNET_TYPE 0x0f /* ether_desc */ -#define USB_CDC_WHCM_TYPE 0x11 -#define USB_CDC_MDLM_TYPE 0x12 /* mdlm_desc */ -#define USB_CDC_MDLM_DETAIL_TYPE 0x13 /* mdlm_detail_desc */ -#define USB_CDC_DMM_TYPE 0x14 -#define USB_CDC_OBEX_TYPE 0x15 -#define USB_CDC_NCM_TYPE 0x1a - -/* "Header Functional Descriptor" from CDC spec 5.2.3.1 */ -struct usb_cdc_header_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __le16 bcdCDC; -} __attribute__ ((packed)); - -/* "Call Management Descriptor" from CDC spec 5.2.3.2 */ -struct usb_cdc_call_mgmt_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 bmCapabilities; -#define USB_CDC_CALL_MGMT_CAP_CALL_MGMT 0x01 -#define USB_CDC_CALL_MGMT_CAP_DATA_INTF 0x02 - - __u8 bDataInterface; -} __attribute__ ((packed)); - -/* "Abstract Control Management Descriptor" from CDC spec 5.2.3.3 */ -struct usb_cdc_acm_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 bmCapabilities; -} __attribute__ ((packed)); - -/* capabilities from 5.2.3.3 */ - -#define USB_CDC_COMM_FEATURE 0x01 -#define USB_CDC_CAP_LINE 0x02 -#define USB_CDC_CAP_BRK 0x04 -#define USB_CDC_CAP_NOTIFY 0x08 - -/* "Union Functional Descriptor" from CDC spec 5.2.3.8 */ -struct usb_cdc_union_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 bMasterInterface0; - __u8 bSlaveInterface0; - /* ... and there could be other slave interfaces */ -} __attribute__ ((packed)); - -/* "Country Selection Functional Descriptor" from CDC spec 5.2.3.9 */ -struct usb_cdc_country_functional_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 iCountryCodeRelDate; - __le16 wCountyCode0; - /* ... and there can be a lot of country codes */ -} __attribute__ ((packed)); - -/* "Network Channel Terminal Functional Descriptor" from CDC spec 5.2.3.11 */ -struct usb_cdc_network_terminal_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 bEntityId; - __u8 iName; - __u8 bChannelIndex; - __u8 bPhysicalInterface; -} __attribute__ ((packed)); - -/* "Ethernet Networking Functional Descriptor" from CDC spec 5.2.3.16 */ -struct usb_cdc_ether_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __u8 iMACAddress; - __le32 bmEthernetStatistics; - __le16 wMaxSegmentSize; - __le16 wNumberMCFilters; - __u8 bNumberPowerFilters; -} __attribute__ ((packed)); - -/* "Telephone Control Model Functional Descriptor" from CDC WMC spec 6.3..3 */ -struct usb_cdc_dmm_desc { - __u8 bFunctionLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __u16 bcdVersion; - __le16 wMaxCommand; -} __attribute__ ((packed)); - -/* "MDLM Functional Descriptor" from CDC WMC spec 6.7.2.3 */ -struct usb_cdc_mdlm_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __le16 bcdVersion; - __u8 bGUID[16]; -} __attribute__ ((packed)); - -/* "MDLM Detail Functional Descriptor" from CDC WMC spec 6.7.2.4 */ -struct usb_cdc_mdlm_detail_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - /* type is associated with mdlm_desc.bGUID */ - __u8 bGuidDescriptorType; - __u8 bDetailData[0]; -} __attribute__ ((packed)); - -/* "OBEX Control Model Functional Descriptor" */ -struct usb_cdc_obex_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __le16 bcdVersion; -} __attribute__ ((packed)); - -/* "NCM Control Model Functional Descriptor" */ -struct usb_cdc_ncm_desc { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - - __le16 bcdNcmVersion; - __u8 bmNetworkCapabilities; -} __attribute__ ((packed)); -/*-------------------------------------------------------------------------*/ - -/* - * Class-Specific Control Requests (6.2) - * - * section 3.6.2.1 table 4 has the ACM profile, for modems. - * section 3.8.2 table 10 has the ethernet profile. - * - * Microsoft's RNDIS stack for Ethernet is a vendor-specific CDC ACM variant, - * heavily dependent on the encapsulated (proprietary) command mechanism. - */ - -#define USB_CDC_SEND_ENCAPSULATED_COMMAND 0x00 -#define USB_CDC_GET_ENCAPSULATED_RESPONSE 0x01 -#define USB_CDC_REQ_SET_LINE_CODING 0x20 -#define USB_CDC_REQ_GET_LINE_CODING 0x21 -#define USB_CDC_REQ_SET_CONTROL_LINE_STATE 0x22 -#define USB_CDC_REQ_SEND_BREAK 0x23 -#define USB_CDC_SET_ETHERNET_MULTICAST_FILTERS 0x40 -#define USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER 0x41 -#define USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER 0x42 -#define USB_CDC_SET_ETHERNET_PACKET_FILTER 0x43 -#define USB_CDC_GET_ETHERNET_STATISTIC 0x44 -#define USB_CDC_GET_NTB_PARAMETERS 0x80 -#define USB_CDC_GET_NET_ADDRESS 0x81 -#define USB_CDC_SET_NET_ADDRESS 0x82 -#define USB_CDC_GET_NTB_FORMAT 0x83 -#define USB_CDC_SET_NTB_FORMAT 0x84 -#define USB_CDC_GET_NTB_INPUT_SIZE 0x85 -#define USB_CDC_SET_NTB_INPUT_SIZE 0x86 -#define USB_CDC_GET_MAX_DATAGRAM_SIZE 0x87 -#define USB_CDC_SET_MAX_DATAGRAM_SIZE 0x88 -#define USB_CDC_GET_CRC_MODE 0x89 -#define USB_CDC_SET_CRC_MODE 0x8a - -/* Line Coding Structure from CDC spec 6.2.13 */ -struct usb_cdc_line_coding { - __le32 dwDTERate; - __u8 bCharFormat; -#define USB_CDC_1_STOP_BITS 0 -#define USB_CDC_1_5_STOP_BITS 1 -#define USB_CDC_2_STOP_BITS 2 - - __u8 bParityType; -#define USB_CDC_NO_PARITY 0 -#define USB_CDC_ODD_PARITY 1 -#define USB_CDC_EVEN_PARITY 2 -#define USB_CDC_MARK_PARITY 3 -#define USB_CDC_SPACE_PARITY 4 - - __u8 bDataBits; -} __attribute__ ((packed)); - -/* table 62; bits in multicast filter */ -#define USB_CDC_PACKET_TYPE_PROMISCUOUS (1 << 0) -#define USB_CDC_PACKET_TYPE_ALL_MULTICAST (1 << 1) /* no filter */ -#define USB_CDC_PACKET_TYPE_DIRECTED (1 << 2) -#define USB_CDC_PACKET_TYPE_BROADCAST (1 << 3) -#define USB_CDC_PACKET_TYPE_MULTICAST (1 << 4) /* filtered */ - - -/*-------------------------------------------------------------------------*/ - -/* - * Class-Specific Notifications (6.3) sent by interrupt transfers - * - * section 3.8.2 table 11 of the CDC spec lists Ethernet notifications - * section 3.6.2.1 table 5 specifies ACM notifications, accepted by RNDIS - * RNDIS also defines its own bit-incompatible notifications - */ - -#define USB_CDC_NOTIFY_NETWORK_CONNECTION 0x00 -#define USB_CDC_NOTIFY_RESPONSE_AVAILABLE 0x01 -#define USB_CDC_NOTIFY_SERIAL_STATE 0x20 -#define USB_CDC_NOTIFY_SPEED_CHANGE 0x2a - -struct usb_cdc_notification { - __u8 bmRequestType; - __u8 bNotificationType; - __le16 wValue; - __le16 wIndex; - __le16 wLength; -} __attribute__ ((packed)); - -struct usb_cdc_speed_change { - __le32 DLBitRRate; /* contains the downlink bit rate (IN pipe) */ - __le32 ULBitRate; /* contains the uplink bit rate (OUT pipe) */ -} __attribute__ ((packed)); - -/*-------------------------------------------------------------------------*/ - -/* - * Class Specific structures and constants - * - * CDC NCM NTB parameters structure, CDC NCM subclass 6.2.1 - * - */ - -struct usb_cdc_ncm_ntb_parameters { - __le16 wLength; - __le16 bmNtbFormatsSupported; - __le32 dwNtbInMaxSize; - __le16 wNdpInDivisor; - __le16 wNdpInPayloadRemainder; - __le16 wNdpInAlignment; - __le16 wPadding1; - __le32 dwNtbOutMaxSize; - __le16 wNdpOutDivisor; - __le16 wNdpOutPayloadRemainder; - __le16 wNdpOutAlignment; - __le16 wNtbOutMaxDatagrams; -} __attribute__ ((packed)); - -/* - * CDC NCM transfer headers, CDC NCM subclass 3.2 - */ - -#define USB_CDC_NCM_NTH16_SIGN 0x484D434E /* NCMH */ -#define USB_CDC_NCM_NTH32_SIGN 0x686D636E /* ncmh */ - -struct usb_cdc_ncm_nth16 { - __le32 dwSignature; - __le16 wHeaderLength; - __le16 wSequence; - __le16 wBlockLength; - __le16 wNdpIndex; -} __attribute__ ((packed)); - -struct usb_cdc_ncm_nth32 { - __le32 dwSignature; - __le16 wHeaderLength; - __le16 wSequence; - __le32 dwBlockLength; - __le32 dwNdpIndex; -} __attribute__ ((packed)); - -/* - * CDC NCM datagram pointers, CDC NCM subclass 3.3 - */ - -#define USB_CDC_NCM_NDP16_CRC_SIGN 0x314D434E /* NCM1 */ -#define USB_CDC_NCM_NDP16_NOCRC_SIGN 0x304D434E /* NCM0 */ -#define USB_CDC_NCM_NDP32_CRC_SIGN 0x316D636E /* ncm1 */ -#define USB_CDC_NCM_NDP32_NOCRC_SIGN 0x306D636E /* ncm0 */ - -/* 16-bit NCM Datagram Pointer Entry */ -struct usb_cdc_ncm_dpe16 { - __le16 wDatagramIndex; - __le16 wDatagramLength; -} __attribute__((__packed__)); - -/* 16-bit NCM Datagram Pointer Table */ -struct usb_cdc_ncm_ndp16 { - __le32 dwSignature; - __le16 wLength; - __le16 wNextNdpIndex; - struct usb_cdc_ncm_dpe16 dpe16[0]; -} __attribute__ ((packed)); - -/* 32-bit NCM Datagram Pointer Entry */ -struct usb_cdc_ncm_dpe32 { - __le32 dwDatagramIndex; - __le32 dwDatagramLength; -} __attribute__((__packed__)); - -/* 32-bit NCM Datagram Pointer Table */ -struct usb_cdc_ncm_ndp32 { - __le32 dwSignature; - __le16 wLength; - __le16 wReserved6; - __le32 dwNextNdpIndex; - __le32 dwReserved12; - struct usb_cdc_ncm_dpe32 dpe32[0]; -} __attribute__ ((packed)); - -/* CDC NCM subclass 3.2.1 and 3.2.2 */ -#define USB_CDC_NCM_NDP16_INDEX_MIN 0x000C -#define USB_CDC_NCM_NDP32_INDEX_MIN 0x0010 - -/* CDC NCM subclass 3.3.3 Datagram Formatting */ -#define USB_CDC_NCM_DATAGRAM_FORMAT_CRC 0x30 -#define USB_CDC_NCM_DATAGRAM_FORMAT_NOCRC 0X31 - -/* CDC NCM subclass 4.2 NCM Communications Interface Protocol Code */ -#define USB_CDC_NCM_PROTO_CODE_NO_ENCAP_COMMANDS 0x00 -#define USB_CDC_NCM_PROTO_CODE_EXTERN_PROTO 0xFE - -/* CDC NCM subclass 5.2.1 NCM Functional Descriptor, bmNetworkCapabilities */ -#define USB_CDC_NCM_NCAP_ETH_FILTER (1 << 0) -#define USB_CDC_NCM_NCAP_NET_ADDRESS (1 << 1) -#define USB_CDC_NCM_NCAP_ENCAP_COMMAND (1 << 2) -#define USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE (1 << 3) -#define USB_CDC_NCM_NCAP_CRC_MODE (1 << 4) -#define USB_CDC_NCM_NCAP_NTB_INPUT_SIZE (1 << 5) - -/* CDC NCM subclass Table 6-3: NTB Parameter Structure */ -#define USB_CDC_NCM_NTB16_SUPPORTED (1 << 0) -#define USB_CDC_NCM_NTB32_SUPPORTED (1 << 1) - -/* CDC NCM subclass Table 6-3: NTB Parameter Structure */ -#define USB_CDC_NCM_NDP_ALIGN_MIN_SIZE 0x04 -#define USB_CDC_NCM_NTB_MAX_LENGTH 0x1C - -/* CDC NCM subclass 6.2.5 SetNtbFormat */ -#define USB_CDC_NCM_NTB16_FORMAT 0x00 -#define USB_CDC_NCM_NTB32_FORMAT 0x01 - -/* CDC NCM subclass 6.2.7 SetNtbInputSize */ -#define USB_CDC_NCM_NTB_MIN_IN_SIZE 2048 -#define USB_CDC_NCM_NTB_MIN_OUT_SIZE 2048 - -/* NTB Input Size Structure */ -struct usb_cdc_ncm_ndp_input_size { - __le32 dwNtbInMaxSize; - __le16 wNtbInMaxDatagrams; - __le16 wReserved; -} __attribute__ ((packed)); - -/* CDC NCM subclass 6.2.11 SetCrcMode */ -#define USB_CDC_NCM_CRC_NOT_APPENDED 0x00 -#define USB_CDC_NCM_CRC_APPENDED 0x01 - -#endif /* __LINUX_USB_CDC_H */ diff --git a/include/linux/usb/cdc_ncm.h b/include/linux/usb/cdc_ncm.h new file mode 100644 index 000000000000..3b8f9d4fc3fe --- /dev/null +++ b/include/linux/usb/cdc_ncm.h @@ -0,0 +1,134 @@ +/* + * Copyright (C) ST-Ericsson 2010-2012 + * Contact: Alexey Orishko <alexey.orishko@stericsson.com> + * Original author: Hans Petter Selasky <hans.petter.selasky@stericsson.com> + * + * USB Host Driver for Network Control Model (NCM) + * http://www.usb.org/developers/devclass_docs/NCM10.zip + * + * The NCM encoding, decoding and initialization logic + * derives from FreeBSD 8.x. if_cdce.c and if_cdcereg.h + * + * This software is available to you under a choice of one of two + * licenses. You may choose this file to be licensed under the terms + * of the GNU General Public License (GPL) Version 2 or the 2-clause + * BSD license listed below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +#define CDC_NCM_COMM_ALTSETTING_NCM 0 +#define CDC_NCM_COMM_ALTSETTING_MBIM 1 + +#define CDC_NCM_DATA_ALTSETTING_NCM 1 +#define CDC_NCM_DATA_ALTSETTING_MBIM 2 + +/* CDC NCM subclass 3.2.1 */ +#define USB_CDC_NCM_NDP16_LENGTH_MIN 0x10 + +/* Maximum NTB length */ +#define CDC_NCM_NTB_MAX_SIZE_TX 32768 /* bytes */ +#define CDC_NCM_NTB_MAX_SIZE_RX 32768 /* bytes */ + +/* Minimum value for MaxDatagramSize, ch. 6.2.9 */ +#define CDC_NCM_MIN_DATAGRAM_SIZE 1514 /* bytes */ + +/* Minimum value for MaxDatagramSize, ch. 8.1.3 */ +#define CDC_MBIM_MIN_DATAGRAM_SIZE 2048 /* bytes */ + +#define CDC_NCM_MIN_TX_PKT 512 /* bytes */ + +/* Default value for MaxDatagramSize */ +#define CDC_NCM_MAX_DATAGRAM_SIZE 8192 /* bytes */ + +/* + * Maximum amount of datagrams in NCM Datagram Pointer Table, not counting + * the last NULL entry. + */ +#define CDC_NCM_DPT_DATAGRAMS_MAX 40 + +/* Restart the timer, if amount of datagrams is less than given value */ +#define CDC_NCM_RESTART_TIMER_DATAGRAM_CNT 3 +#define CDC_NCM_TIMER_PENDING_CNT 2 +#define CDC_NCM_TIMER_INTERVAL (400UL * NSEC_PER_USEC) + +/* The following macro defines the minimum header space */ +#define CDC_NCM_MIN_HDR_SIZE \ + (sizeof(struct usb_cdc_ncm_nth16) + sizeof(struct usb_cdc_ncm_ndp16) + \ + (CDC_NCM_DPT_DATAGRAMS_MAX + 1) * sizeof(struct usb_cdc_ncm_dpe16)) + +#define CDC_NCM_NDP_SIZE \ + (sizeof(struct usb_cdc_ncm_ndp16) + \ + (CDC_NCM_DPT_DATAGRAMS_MAX + 1) * sizeof(struct usb_cdc_ncm_dpe16)) + +#define cdc_ncm_comm_intf_is_mbim(x) ((x)->desc.bInterfaceSubClass == USB_CDC_SUBCLASS_MBIM && \ + (x)->desc.bInterfaceProtocol == USB_CDC_PROTO_NONE) +#define cdc_ncm_data_intf_is_mbim(x) ((x)->desc.bInterfaceProtocol == USB_CDC_MBIM_PROTO_NTB) + +struct cdc_ncm_ctx { + struct usb_cdc_ncm_ntb_parameters ncm_parm; + struct hrtimer tx_timer; + struct tasklet_struct bh; + + const struct usb_cdc_ncm_desc *func_desc; + const struct usb_cdc_mbim_desc *mbim_desc; + const struct usb_cdc_header_desc *header_desc; + const struct usb_cdc_union_desc *union_desc; + const struct usb_cdc_ether_desc *ether_desc; + + struct net_device *netdev; + struct usb_device *udev; + struct usb_host_endpoint *in_ep; + struct usb_host_endpoint *out_ep; + struct usb_host_endpoint *status_ep; + struct usb_interface *intf; + struct usb_interface *control; + struct usb_interface *data; + + struct sk_buff *tx_curr_skb; + struct sk_buff *tx_rem_skb; + __le32 tx_rem_sign; + + spinlock_t mtx; + atomic_t stop; + + u32 tx_timer_pending; + u32 tx_curr_frame_num; + u32 rx_speed; + u32 tx_speed; + u32 rx_max; + u32 tx_max; + u32 max_datagram_size; + u16 tx_max_datagrams; + u16 tx_remainder; + u16 tx_modulus; + u16 tx_ndp_modulus; + u16 tx_seq; + u16 rx_seq; + u16 connected; +}; + +extern int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting); +extern void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf); +extern struct sk_buff *cdc_ncm_fill_tx_frame(struct cdc_ncm_ctx *ctx, struct sk_buff *skb, __le32 sign); +extern int cdc_ncm_rx_verify_nth16(struct cdc_ncm_ctx *ctx, struct sk_buff *skb_in); +extern int cdc_ncm_rx_verify_ndp16(struct sk_buff *skb_in, int ndpoffset); diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h deleted file mode 100644 index 7692dc69ccf7..000000000000 --- a/include/linux/usb/ch11.h +++ /dev/null @@ -1,266 +0,0 @@ -/* - * This file holds Hub protocol constants and data structures that are - * defined in chapter 11 (Hub Specification) of the USB 2.0 specification. - * - * It is used/shared between the USB core, the HCDs and couple of other USB - * drivers. - */ - -#ifndef __LINUX_CH11_H -#define __LINUX_CH11_H - -#include <linux/types.h> /* __u8 etc */ - -/* - * Hub request types - */ - -#define USB_RT_HUB (USB_TYPE_CLASS | USB_RECIP_DEVICE) -#define USB_RT_PORT (USB_TYPE_CLASS | USB_RECIP_OTHER) - -/* - * Hub class requests - * See USB 2.0 spec Table 11-16 - */ -#define HUB_CLEAR_TT_BUFFER 8 -#define HUB_RESET_TT 9 -#define HUB_GET_TT_STATE 10 -#define HUB_STOP_TT 11 - -/* - * Hub class additional requests defined by USB 3.0 spec - * See USB 3.0 spec Table 10-6 - */ -#define HUB_SET_DEPTH 12 -#define HUB_GET_PORT_ERR_COUNT 13 - -/* - * Hub Class feature numbers - * See USB 2.0 spec Table 11-17 - */ -#define C_HUB_LOCAL_POWER 0 -#define C_HUB_OVER_CURRENT 1 - -/* - * Port feature numbers - * See USB 2.0 spec Table 11-17 - */ -#define USB_PORT_FEAT_CONNECTION 0 -#define USB_PORT_FEAT_ENABLE 1 -#define USB_PORT_FEAT_SUSPEND 2 /* L2 suspend */ -#define USB_PORT_FEAT_OVER_CURRENT 3 -#define USB_PORT_FEAT_RESET 4 -#define USB_PORT_FEAT_L1 5 /* L1 suspend */ -#define USB_PORT_FEAT_POWER 8 -#define USB_PORT_FEAT_LOWSPEED 9 /* Should never be used */ -#define USB_PORT_FEAT_C_CONNECTION 16 -#define USB_PORT_FEAT_C_ENABLE 17 -#define USB_PORT_FEAT_C_SUSPEND 18 -#define USB_PORT_FEAT_C_OVER_CURRENT 19 -#define USB_PORT_FEAT_C_RESET 20 -#define USB_PORT_FEAT_TEST 21 -#define USB_PORT_FEAT_INDICATOR 22 -#define USB_PORT_FEAT_C_PORT_L1 23 - -/* - * Port feature selectors added by USB 3.0 spec. - * See USB 3.0 spec Table 10-7 - */ -#define USB_PORT_FEAT_LINK_STATE 5 -#define USB_PORT_FEAT_U1_TIMEOUT 23 -#define USB_PORT_FEAT_U2_TIMEOUT 24 -#define USB_PORT_FEAT_C_PORT_LINK_STATE 25 -#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26 -#define USB_PORT_FEAT_REMOTE_WAKE_MASK 27 -#define USB_PORT_FEAT_BH_PORT_RESET 28 -#define USB_PORT_FEAT_C_BH_PORT_RESET 29 -#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30 - -#define USB_PORT_LPM_TIMEOUT(p) (((p) & 0xff) << 8) - -/* USB 3.0 hub remote wake mask bits, see table 10-14 */ -#define USB_PORT_FEAT_REMOTE_WAKE_CONNECT (1 << 8) -#define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT (1 << 9) -#define USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT (1 << 10) - -/* - * Hub Status and Hub Change results - * See USB 2.0 spec Table 11-19 and Table 11-20 - */ -struct usb_port_status { - __le16 wPortStatus; - __le16 wPortChange; -} __attribute__ ((packed)); - -/* - * wPortStatus bit field - * See USB 2.0 spec Table 11-21 - */ -#define USB_PORT_STAT_CONNECTION 0x0001 -#define USB_PORT_STAT_ENABLE 0x0002 -#define USB_PORT_STAT_SUSPEND 0x0004 -#define USB_PORT_STAT_OVERCURRENT 0x0008 -#define USB_PORT_STAT_RESET 0x0010 -#define USB_PORT_STAT_L1 0x0020 -/* bits 6 to 7 are reserved */ -#define USB_PORT_STAT_POWER 0x0100 -#define USB_PORT_STAT_LOW_SPEED 0x0200 -#define USB_PORT_STAT_HIGH_SPEED 0x0400 -#define USB_PORT_STAT_TEST 0x0800 -#define USB_PORT_STAT_INDICATOR 0x1000 -/* bits 13 to 15 are reserved */ - -/* - * Additions to wPortStatus bit field from USB 3.0 - * See USB 3.0 spec Table 10-10 - */ -#define USB_PORT_STAT_LINK_STATE 0x01e0 -#define USB_SS_PORT_STAT_POWER 0x0200 -#define USB_SS_PORT_STAT_SPEED 0x1c00 -#define USB_PORT_STAT_SPEED_5GBPS 0x0000 -/* Valid only if port is enabled */ -/* Bits that are the same from USB 2.0 */ -#define USB_SS_PORT_STAT_MASK (USB_PORT_STAT_CONNECTION | \ - USB_PORT_STAT_ENABLE | \ - USB_PORT_STAT_OVERCURRENT | \ - USB_PORT_STAT_RESET) - -/* - * Definitions for PORT_LINK_STATE values - * (bits 5-8) in wPortStatus - */ -#define USB_SS_PORT_LS_U0 0x0000 -#define USB_SS_PORT_LS_U1 0x0020 -#define USB_SS_PORT_LS_U2 0x0040 -#define USB_SS_PORT_LS_U3 0x0060 -#define USB_SS_PORT_LS_SS_DISABLED 0x0080 -#define USB_SS_PORT_LS_RX_DETECT 0x00a0 -#define USB_SS_PORT_LS_SS_INACTIVE 0x00c0 -#define USB_SS_PORT_LS_POLLING 0x00e0 -#define USB_SS_PORT_LS_RECOVERY 0x0100 -#define USB_SS_PORT_LS_HOT_RESET 0x0120 -#define USB_SS_PORT_LS_COMP_MOD 0x0140 -#define USB_SS_PORT_LS_LOOPBACK 0x0160 - -/* - * wPortChange bit field - * See USB 2.0 spec Table 11-22 and USB 2.0 LPM ECN Table-4.10 - * Bits 0 to 5 shown, bits 6 to 15 are reserved - */ -#define USB_PORT_STAT_C_CONNECTION 0x0001 -#define USB_PORT_STAT_C_ENABLE 0x0002 -#define USB_PORT_STAT_C_SUSPEND 0x0004 -#define USB_PORT_STAT_C_OVERCURRENT 0x0008 -#define USB_PORT_STAT_C_RESET 0x0010 -#define USB_PORT_STAT_C_L1 0x0020 -/* - * USB 3.0 wPortChange bit fields - * See USB 3.0 spec Table 10-11 - */ -#define USB_PORT_STAT_C_BH_RESET 0x0020 -#define USB_PORT_STAT_C_LINK_STATE 0x0040 -#define USB_PORT_STAT_C_CONFIG_ERROR 0x0080 - -/* - * wHubCharacteristics (masks) - * See USB 2.0 spec Table 11-13, offset 3 - */ -#define HUB_CHAR_LPSM 0x0003 /* Logical Power Switching Mode mask */ -#define HUB_CHAR_COMMON_LPSM 0x0000 /* All ports power control at once */ -#define HUB_CHAR_INDV_PORT_LPSM 0x0001 /* per-port power control */ -#define HUB_CHAR_NO_LPSM 0x0002 /* no power switching */ - -#define HUB_CHAR_COMPOUND 0x0004 /* hub is part of a compound device */ - -#define HUB_CHAR_OCPM 0x0018 /* Over-Current Protection Mode mask */ -#define HUB_CHAR_COMMON_OCPM 0x0000 /* All ports Over-Current reporting */ -#define HUB_CHAR_INDV_PORT_OCPM 0x0008 /* per-port Over-current reporting */ -#define HUB_CHAR_NO_OCPM 0x0010 /* No Over-current Protection support */ - -#define HUB_CHAR_TTTT 0x0060 /* TT Think Time mask */ -#define HUB_CHAR_PORTIND 0x0080 /* per-port indicators (LEDs) */ - -struct usb_hub_status { - __le16 wHubStatus; - __le16 wHubChange; -} __attribute__ ((packed)); - -/* - * Hub Status & Hub Change bit masks - * See USB 2.0 spec Table 11-19 and Table 11-20 - * Bits 0 and 1 for wHubStatus and wHubChange - * Bits 2 to 15 are reserved for both - */ -#define HUB_STATUS_LOCAL_POWER 0x0001 -#define HUB_STATUS_OVERCURRENT 0x0002 -#define HUB_CHANGE_LOCAL_POWER 0x0001 -#define HUB_CHANGE_OVERCURRENT 0x0002 - - -/* - * Hub descriptor - * See USB 2.0 spec Table 11-13 - */ - -#define USB_DT_HUB (USB_TYPE_CLASS | 0x09) -#define USB_DT_SS_HUB (USB_TYPE_CLASS | 0x0a) -#define USB_DT_HUB_NONVAR_SIZE 7 -#define USB_DT_SS_HUB_SIZE 12 - -/* - * Hub Device descriptor - * USB Hub class device protocols - */ - -#define USB_HUB_PR_FS 0 /* Full speed hub */ -#define USB_HUB_PR_HS_NO_TT 0 /* Hi-speed hub without TT */ -#define USB_HUB_PR_HS_SINGLE_TT 1 /* Hi-speed hub with single TT */ -#define USB_HUB_PR_HS_MULTI_TT 2 /* Hi-speed hub with multiple TT */ -#define USB_HUB_PR_SS 3 /* Super speed hub */ - -struct usb_hub_descriptor { - __u8 bDescLength; - __u8 bDescriptorType; - __u8 bNbrPorts; - __le16 wHubCharacteristics; - __u8 bPwrOn2PwrGood; - __u8 bHubContrCurrent; - - /* 2.0 and 3.0 hubs differ here */ - union { - struct { - /* add 1 bit for hub status change; round to bytes */ - __u8 DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8]; - __u8 PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8]; - } __attribute__ ((packed)) hs; - - struct { - __u8 bHubHdrDecLat; - __le16 wHubDelay; - __le16 DeviceRemovable; - } __attribute__ ((packed)) ss; - } u; -} __attribute__ ((packed)); - -/* port indicator status selectors, tables 11-7 and 11-25 */ -#define HUB_LED_AUTO 0 -#define HUB_LED_AMBER 1 -#define HUB_LED_GREEN 2 -#define HUB_LED_OFF 3 - -enum hub_led_mode { - INDICATOR_AUTO = 0, - INDICATOR_CYCLE, - /* software blinks for attention: software, hardware, reserved */ - INDICATOR_GREEN_BLINK, INDICATOR_GREEN_BLINK_OFF, - INDICATOR_AMBER_BLINK, INDICATOR_AMBER_BLINK_OFF, - INDICATOR_ALT_BLINK, INDICATOR_ALT_BLINK_OFF -} __attribute__ ((packed)); - -/* Transaction Translator Think Times, in bits */ -#define HUB_TTTT_8_BITS 0x00 -#define HUB_TTTT_16_BITS 0x20 -#define HUB_TTTT_24_BITS 0x40 -#define HUB_TTTT_32_BITS 0x60 - -#endif /* __LINUX_CH11_H */ diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index d1d732c2838d..9c210f2283df 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -29,887 +29,11 @@ * someone that the two other points are non-issues for that * particular descriptor type. */ - #ifndef __LINUX_USB_CH9_H #define __LINUX_USB_CH9_H -#include <linux/types.h> /* __u8 etc */ -#include <asm/byteorder.h> /* le16_to_cpu */ - -/*-------------------------------------------------------------------------*/ - -/* CONTROL REQUEST SUPPORT */ - -/* - * USB directions - * - * This bit flag is used in endpoint descriptors' bEndpointAddress field. - * It's also one of three fields in control requests bRequestType. - */ -#define USB_DIR_OUT 0 /* to device */ -#define USB_DIR_IN 0x80 /* to host */ - -/* - * USB types, the second of three bRequestType fields - */ -#define USB_TYPE_MASK (0x03 << 5) -#define USB_TYPE_STANDARD (0x00 << 5) -#define USB_TYPE_CLASS (0x01 << 5) -#define USB_TYPE_VENDOR (0x02 << 5) -#define USB_TYPE_RESERVED (0x03 << 5) - -/* - * USB recipients, the third of three bRequestType fields - */ -#define USB_RECIP_MASK 0x1f -#define USB_RECIP_DEVICE 0x00 -#define USB_RECIP_INTERFACE 0x01 -#define USB_RECIP_ENDPOINT 0x02 -#define USB_RECIP_OTHER 0x03 -/* From Wireless USB 1.0 */ -#define USB_RECIP_PORT 0x04 -#define USB_RECIP_RPIPE 0x05 - -/* - * Standard requests, for the bRequest field of a SETUP packet. - * - * These are qualified by the bRequestType field, so that for example - * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved - * by a GET_STATUS request. - */ -#define USB_REQ_GET_STATUS 0x00 -#define USB_REQ_CLEAR_FEATURE 0x01 -#define USB_REQ_SET_FEATURE 0x03 -#define USB_REQ_SET_ADDRESS 0x05 -#define USB_REQ_GET_DESCRIPTOR 0x06 -#define USB_REQ_SET_DESCRIPTOR 0x07 -#define USB_REQ_GET_CONFIGURATION 0x08 -#define USB_REQ_SET_CONFIGURATION 0x09 -#define USB_REQ_GET_INTERFACE 0x0A -#define USB_REQ_SET_INTERFACE 0x0B -#define USB_REQ_SYNCH_FRAME 0x0C -#define USB_REQ_SET_SEL 0x30 -#define USB_REQ_SET_ISOCH_DELAY 0x31 - -#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */ -#define USB_REQ_GET_ENCRYPTION 0x0E -#define USB_REQ_RPIPE_ABORT 0x0E -#define USB_REQ_SET_HANDSHAKE 0x0F -#define USB_REQ_RPIPE_RESET 0x0F -#define USB_REQ_GET_HANDSHAKE 0x10 -#define USB_REQ_SET_CONNECTION 0x11 -#define USB_REQ_SET_SECURITY_DATA 0x12 -#define USB_REQ_GET_SECURITY_DATA 0x13 -#define USB_REQ_SET_WUSB_DATA 0x14 -#define USB_REQ_LOOPBACK_DATA_WRITE 0x15 -#define USB_REQ_LOOPBACK_DATA_READ 0x16 -#define USB_REQ_SET_INTERFACE_DS 0x17 - -/* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command, - * used by hubs to put ports into a new L1 suspend state, except that it - * forgot to define its number ... - */ - -/* - * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and - * are read as a bit array returned by USB_REQ_GET_STATUS. (So there - * are at most sixteen features of each type.) Hubs may also support a - * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend. - */ -#define USB_DEVICE_SELF_POWERED 0 /* (read only) */ -#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */ -#define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */ -#define USB_DEVICE_BATTERY 2 /* (wireless) */ -#define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */ -#define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/ -#define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */ -#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */ -#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */ - -/* - * Test Mode Selectors - * See USB 2.0 spec Table 9-7 - */ -#define TEST_J 1 -#define TEST_K 2 -#define TEST_SE0_NAK 3 -#define TEST_PACKET 4 -#define TEST_FORCE_EN 5 - -/* - * New Feature Selectors as added by USB 3.0 - * See USB 3.0 spec Table 9-6 - */ -#define USB_DEVICE_U1_ENABLE 48 /* dev may initiate U1 transition */ -#define USB_DEVICE_U2_ENABLE 49 /* dev may initiate U2 transition */ -#define USB_DEVICE_LTM_ENABLE 50 /* dev may send LTM */ -#define USB_INTRF_FUNC_SUSPEND 0 /* function suspend */ - -#define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00 -/* - * Suspend Options, Table 9-7 USB 3.0 spec - */ -#define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0)) -#define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1)) - -#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ - -/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */ -#define USB_DEV_STAT_U1_ENABLED 2 /* transition into U1 state */ -#define USB_DEV_STAT_U2_ENABLED 3 /* transition into U2 state */ -#define USB_DEV_STAT_LTM_ENABLED 4 /* Latency tolerance messages */ - -/** - * struct usb_ctrlrequest - SETUP data for a USB device control request - * @bRequestType: matches the USB bmRequestType field - * @bRequest: matches the USB bRequest field - * @wValue: matches the USB wValue field (le16 byte order) - * @wIndex: matches the USB wIndex field (le16 byte order) - * @wLength: matches the USB wLength field (le16 byte order) - * - * This structure is used to send control requests to a USB device. It matches - * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the - * USB spec for a fuller description of the different fields, and what they are - * used for. - * - * Note that the driver for any interface can issue control requests. - * For most devices, interfaces don't coordinate with each other, so - * such requests may be made at any time. - */ -struct usb_ctrlrequest { - __u8 bRequestType; - __u8 bRequest; - __le16 wValue; - __le16 wIndex; - __le16 wLength; -} __attribute__ ((packed)); - -/*-------------------------------------------------------------------------*/ - -/* - * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or - * (rarely) accepted by SET_DESCRIPTOR. - * - * Note that all multi-byte values here are encoded in little endian - * byte order "on the wire". Within the kernel and when exposed - * through the Linux-USB APIs, they are not converted to cpu byte - * order; it is the responsibility of the client code to do this. - * The single exception is when device and configuration descriptors (but - * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD); - * in this case the fields are converted to host endianness by the kernel. - */ - -/* - * Descriptor types ... USB 2.0 spec table 9.5 - */ -#define USB_DT_DEVICE 0x01 -#define USB_DT_CONFIG 0x02 -#define USB_DT_STRING 0x03 -#define USB_DT_INTERFACE 0x04 -#define USB_DT_ENDPOINT 0x05 -#define USB_DT_DEVICE_QUALIFIER 0x06 -#define USB_DT_OTHER_SPEED_CONFIG 0x07 -#define USB_DT_INTERFACE_POWER 0x08 -/* these are from a minor usb 2.0 revision (ECN) */ -#define USB_DT_OTG 0x09 -#define USB_DT_DEBUG 0x0a -#define USB_DT_INTERFACE_ASSOCIATION 0x0b -/* these are from the Wireless USB spec */ -#define USB_DT_SECURITY 0x0c -#define USB_DT_KEY 0x0d -#define USB_DT_ENCRYPTION_TYPE 0x0e -#define USB_DT_BOS 0x0f -#define USB_DT_DEVICE_CAPABILITY 0x10 -#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11 -#define USB_DT_WIRE_ADAPTER 0x21 -#define USB_DT_RPIPE 0x22 -#define USB_DT_CS_RADIO_CONTROL 0x23 -/* From the T10 UAS specification */ -#define USB_DT_PIPE_USAGE 0x24 -/* From the USB 3.0 spec */ -#define USB_DT_SS_ENDPOINT_COMP 0x30 - -/* Conventional codes for class-specific descriptors. The convention is - * defined in the USB "Common Class" Spec (3.11). Individual class specs - * are authoritative for their usage, not the "common class" writeup. - */ -#define USB_DT_CS_DEVICE (USB_TYPE_CLASS | USB_DT_DEVICE) -#define USB_DT_CS_CONFIG (USB_TYPE_CLASS | USB_DT_CONFIG) -#define USB_DT_CS_STRING (USB_TYPE_CLASS | USB_DT_STRING) -#define USB_DT_CS_INTERFACE (USB_TYPE_CLASS | USB_DT_INTERFACE) -#define USB_DT_CS_ENDPOINT (USB_TYPE_CLASS | USB_DT_ENDPOINT) - -/* All standard descriptors have these 2 fields at the beginning */ -struct usb_descriptor_header { - __u8 bLength; - __u8 bDescriptorType; -} __attribute__ ((packed)); - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_DEVICE: Device descriptor */ -struct usb_device_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 bcdUSB; - __u8 bDeviceClass; - __u8 bDeviceSubClass; - __u8 bDeviceProtocol; - __u8 bMaxPacketSize0; - __le16 idVendor; - __le16 idProduct; - __le16 bcdDevice; - __u8 iManufacturer; - __u8 iProduct; - __u8 iSerialNumber; - __u8 bNumConfigurations; -} __attribute__ ((packed)); - -#define USB_DT_DEVICE_SIZE 18 - - -/* - * Device and/or Interface Class codes - * as found in bDeviceClass or bInterfaceClass - * and defined by www.usb.org documents - */ -#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */ -#define USB_CLASS_AUDIO 1 -#define USB_CLASS_COMM 2 -#define USB_CLASS_HID 3 -#define USB_CLASS_PHYSICAL 5 -#define USB_CLASS_STILL_IMAGE 6 -#define USB_CLASS_PRINTER 7 -#define USB_CLASS_MASS_STORAGE 8 -#define USB_CLASS_HUB 9 -#define USB_CLASS_CDC_DATA 0x0a -#define USB_CLASS_CSCID 0x0b /* chip+ smart card */ -#define USB_CLASS_CONTENT_SEC 0x0d /* content security */ -#define USB_CLASS_VIDEO 0x0e -#define USB_CLASS_WIRELESS_CONTROLLER 0xe0 -#define USB_CLASS_MISC 0xef -#define USB_CLASS_APP_SPEC 0xfe -#define USB_CLASS_VENDOR_SPEC 0xff - -#define USB_SUBCLASS_VENDOR_SPEC 0xff - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_CONFIG: Configuration descriptor information. - * - * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the - * descriptor type is different. Highspeed-capable devices can look - * different depending on what speed they're currently running. Only - * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG - * descriptors. - */ -struct usb_config_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 wTotalLength; - __u8 bNumInterfaces; - __u8 bConfigurationValue; - __u8 iConfiguration; - __u8 bmAttributes; - __u8 bMaxPower; -} __attribute__ ((packed)); - -#define USB_DT_CONFIG_SIZE 9 - -/* from config descriptor bmAttributes */ -#define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */ -#define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */ -#define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */ -#define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */ - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_STRING: String descriptor */ -struct usb_string_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 wData[1]; /* UTF-16LE encoded */ -} __attribute__ ((packed)); - -/* note that "string" zero is special, it holds language codes that - * the device supports, not Unicode characters. - */ - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_INTERFACE: Interface descriptor */ -struct usb_interface_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bInterfaceNumber; - __u8 bAlternateSetting; - __u8 bNumEndpoints; - __u8 bInterfaceClass; - __u8 bInterfaceSubClass; - __u8 bInterfaceProtocol; - __u8 iInterface; -} __attribute__ ((packed)); - -#define USB_DT_INTERFACE_SIZE 9 - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_ENDPOINT: Endpoint descriptor */ -struct usb_endpoint_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bEndpointAddress; - __u8 bmAttributes; - __le16 wMaxPacketSize; - __u8 bInterval; - - /* NOTE: these two are _only_ in audio endpoints. */ - /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */ - __u8 bRefresh; - __u8 bSynchAddress; -} __attribute__ ((packed)); - -#define USB_DT_ENDPOINT_SIZE 7 -#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */ - - -/* - * Endpoints - */ -#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ -#define USB_ENDPOINT_DIR_MASK 0x80 - -#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ -#define USB_ENDPOINT_XFER_CONTROL 0 -#define USB_ENDPOINT_XFER_ISOC 1 -#define USB_ENDPOINT_XFER_BULK 2 -#define USB_ENDPOINT_XFER_INT 3 -#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80 - -/* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */ -#define USB_ENDPOINT_INTRTYPE 0x30 -#define USB_ENDPOINT_INTR_PERIODIC (0 << 4) -#define USB_ENDPOINT_INTR_NOTIFICATION (1 << 4) - -#define USB_ENDPOINT_SYNCTYPE 0x0c -#define USB_ENDPOINT_SYNC_NONE (0 << 2) -#define USB_ENDPOINT_SYNC_ASYNC (1 << 2) -#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2) -#define USB_ENDPOINT_SYNC_SYNC (3 << 2) - -#define USB_ENDPOINT_USAGE_MASK 0x30 -#define USB_ENDPOINT_USAGE_DATA 0x00 -#define USB_ENDPOINT_USAGE_FEEDBACK 0x10 -#define USB_ENDPOINT_USAGE_IMPLICIT_FB 0x20 /* Implicit feedback Data endpoint */ - -/*-------------------------------------------------------------------------*/ - -/** - * usb_endpoint_num - get the endpoint's number - * @epd: endpoint to be checked - * - * Returns @epd's number: 0 to 15. - */ -static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd) -{ - return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; -} - -/** - * usb_endpoint_type - get the endpoint's transfer type - * @epd: endpoint to be checked - * - * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according - * to @epd's transfer type. - */ -static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd) -{ - return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; -} - -/** - * usb_endpoint_dir_in - check if the endpoint has IN direction - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type IN, otherwise it returns false. - */ -static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN); -} - -/** - * usb_endpoint_dir_out - check if the endpoint has OUT direction - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type OUT, otherwise it returns false. - */ -static inline int usb_endpoint_dir_out( - const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); -} - -/** - * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type bulk, otherwise it returns false. - */ -static inline int usb_endpoint_xfer_bulk( - const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_BULK); -} - -/** - * usb_endpoint_xfer_control - check if the endpoint has control transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type control, otherwise it returns false. - */ -static inline int usb_endpoint_xfer_control( - const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_CONTROL); -} - -/** - * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type interrupt, otherwise it returns - * false. - */ -static inline int usb_endpoint_xfer_int( - const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_INT); -} - -/** - * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type - * @epd: endpoint to be checked - * - * Returns true if the endpoint is of type isochronous, otherwise it returns - * false. - */ -static inline int usb_endpoint_xfer_isoc( - const struct usb_endpoint_descriptor *epd) -{ - return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_ISOC); -} - -/** - * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN - * @epd: endpoint to be checked - * - * Returns true if the endpoint has bulk transfer type and IN direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_bulk_in( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd); -} - -/** - * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT - * @epd: endpoint to be checked - * - * Returns true if the endpoint has bulk transfer type and OUT direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_bulk_out( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd); -} - -/** - * usb_endpoint_is_int_in - check if the endpoint is interrupt IN - * @epd: endpoint to be checked - * - * Returns true if the endpoint has interrupt transfer type and IN direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_int_in( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd); -} - -/** - * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT - * @epd: endpoint to be checked - * - * Returns true if the endpoint has interrupt transfer type and OUT direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_int_out( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd); -} - -/** - * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN - * @epd: endpoint to be checked - * - * Returns true if the endpoint has isochronous transfer type and IN direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_isoc_in( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd); -} - -/** - * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT - * @epd: endpoint to be checked - * - * Returns true if the endpoint has isochronous transfer type and OUT direction, - * otherwise it returns false. - */ -static inline int usb_endpoint_is_isoc_out( - const struct usb_endpoint_descriptor *epd) -{ - return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd); -} - -/** - * usb_endpoint_maxp - get endpoint's max packet size - * @epd: endpoint to be checked - * - * Returns @epd's max packet - */ -static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd) -{ - return __le16_to_cpu(epd->wMaxPacketSize); -} - -static inline int usb_endpoint_interrupt_type( - const struct usb_endpoint_descriptor *epd) -{ - return epd->bmAttributes & USB_ENDPOINT_INTRTYPE; -} - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */ -struct usb_ss_ep_comp_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bMaxBurst; - __u8 bmAttributes; - __le16 wBytesPerInterval; -} __attribute__ ((packed)); - -#define USB_DT_SS_EP_COMP_SIZE 6 - -/* Bits 4:0 of bmAttributes if this is a bulk endpoint */ -static inline int -usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp) -{ - int max_streams; - - if (!comp) - return 0; - - max_streams = comp->bmAttributes & 0x1f; - - if (!max_streams) - return 0; - - max_streams = 1 << max_streams; - - return max_streams; -} - -/* Bits 1:0 of bmAttributes if this is an isoc endpoint */ -#define USB_SS_MULT(p) (1 + ((p) & 0x3)) - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */ -struct usb_qualifier_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 bcdUSB; - __u8 bDeviceClass; - __u8 bDeviceSubClass; - __u8 bDeviceProtocol; - __u8 bMaxPacketSize0; - __u8 bNumConfigurations; - __u8 bRESERVED; -} __attribute__ ((packed)); - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_OTG (from OTG 1.0a supplement) */ -struct usb_otg_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bmAttributes; /* support for HNP, SRP, etc */ -} __attribute__ ((packed)); - -/* from usb_otg_descriptor.bmAttributes */ -#define USB_OTG_SRP (1 << 0) -#define USB_OTG_HNP (1 << 1) /* swap host/device roles */ - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_DEBUG: for special highspeed devices, replacing serial console */ -struct usb_debug_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - /* bulk endpoints with 8 byte maxpacket */ - __u8 bDebugInEndpoint; - __u8 bDebugOutEndpoint; -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */ -struct usb_interface_assoc_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bFirstInterface; - __u8 bInterfaceCount; - __u8 bFunctionClass; - __u8 bFunctionSubClass; - __u8 bFunctionProtocol; - __u8 iFunction; -} __attribute__ ((packed)); - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_SECURITY: group of wireless security descriptors, including - * encryption types available for setting up a CC/association. - */ -struct usb_security_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 wTotalLength; - __u8 bNumEncryptionTypes; -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys - * may be retrieved. - */ -struct usb_key_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 tTKID[3]; - __u8 bReserved; - __u8 bKeyData[0]; -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */ -struct usb_encryption_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bEncryptionType; -#define USB_ENC_TYPE_UNSECURE 0 -#define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */ -#define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */ -#define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */ - __u8 bEncryptionValue; /* use in SET_ENCRYPTION */ - __u8 bAuthKeyIndex; -} __attribute__((packed)); - - -/*-------------------------------------------------------------------------*/ - -/* USB_DT_BOS: group of device-level capabilities */ -struct usb_bos_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __le16 wTotalLength; - __u8 bNumDeviceCaps; -} __attribute__((packed)); - -#define USB_DT_BOS_SIZE 5 -/*-------------------------------------------------------------------------*/ - -/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */ -struct usb_dev_cap_header { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; -} __attribute__((packed)); - -#define USB_CAP_TYPE_WIRELESS_USB 1 - -struct usb_wireless_cap_descriptor { /* Ultra Wide Band */ - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; - - __u8 bmAttributes; -#define USB_WIRELESS_P2P_DRD (1 << 1) -#define USB_WIRELESS_BEACON_MASK (3 << 2) -#define USB_WIRELESS_BEACON_SELF (1 << 2) -#define USB_WIRELESS_BEACON_DIRECTED (2 << 2) -#define USB_WIRELESS_BEACON_NONE (3 << 2) - __le16 wPHYRates; /* bit rates, Mbps */ -#define USB_WIRELESS_PHY_53 (1 << 0) /* always set */ -#define USB_WIRELESS_PHY_80 (1 << 1) -#define USB_WIRELESS_PHY_107 (1 << 2) /* always set */ -#define USB_WIRELESS_PHY_160 (1 << 3) -#define USB_WIRELESS_PHY_200 (1 << 4) /* always set */ -#define USB_WIRELESS_PHY_320 (1 << 5) -#define USB_WIRELESS_PHY_400 (1 << 6) -#define USB_WIRELESS_PHY_480 (1 << 7) - __u8 bmTFITXPowerInfo; /* TFI power levels */ - __u8 bmFFITXPowerInfo; /* FFI power levels */ - __le16 bmBandGroup; - __u8 bReserved; -} __attribute__((packed)); - -/* USB 2.0 Extension descriptor */ -#define USB_CAP_TYPE_EXT 2 - -struct usb_ext_cap_descriptor { /* Link Power Management */ - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; - __le32 bmAttributes; -#define USB_LPM_SUPPORT (1 << 1) /* supports LPM */ -#define USB_BESL_SUPPORT (1 << 2) /* supports BESL */ -#define USB_BESL_BASELINE_VALID (1 << 3) /* Baseline BESL valid*/ -#define USB_BESL_DEEP_VALID (1 << 4) /* Deep BESL valid */ -#define USB_GET_BESL_BASELINE(p) (((p) & (0xf << 8)) >> 8) -#define USB_GET_BESL_DEEP(p) (((p) & (0xf << 12)) >> 12) -} __attribute__((packed)); - -#define USB_DT_USB_EXT_CAP_SIZE 7 - -/* - * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB - * specific device level capabilities - */ -#define USB_SS_CAP_TYPE 3 -struct usb_ss_cap_descriptor { /* Link Power Management */ - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; - __u8 bmAttributes; -#define USB_LTM_SUPPORT (1 << 1) /* supports LTM */ - __le16 wSpeedSupported; -#define USB_LOW_SPEED_OPERATION (1) /* Low speed operation */ -#define USB_FULL_SPEED_OPERATION (1 << 1) /* Full speed operation */ -#define USB_HIGH_SPEED_OPERATION (1 << 2) /* High speed operation */ -#define USB_5GBPS_OPERATION (1 << 3) /* Operation at 5Gbps */ - __u8 bFunctionalitySupport; - __u8 bU1devExitLat; - __le16 bU2DevExitLat; -} __attribute__((packed)); - -#define USB_DT_USB_SS_CAP_SIZE 10 - -/* - * Container ID Capability descriptor: Defines the instance unique ID used to - * identify the instance across all operating modes - */ -#define CONTAINER_ID_TYPE 4 -struct usb_ss_container_id_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDevCapabilityType; - __u8 bReserved; - __u8 ContainerID[16]; /* 128-bit number */ -} __attribute__((packed)); - -#define USB_DT_USB_SS_CONTN_ID_SIZE 20 -/*-------------------------------------------------------------------------*/ - -/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with - * each endpoint descriptor for a wireless device - */ -struct usb_wireless_ep_comp_descriptor { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bMaxBurst; - __u8 bMaxSequence; - __le16 wMaxStreamDelay; - __le16 wOverTheAirPacketSize; - __u8 bOverTheAirInterval; - __u8 bmCompAttributes; -#define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */ -#define USB_ENDPOINT_SWITCH_NO 0 -#define USB_ENDPOINT_SWITCH_SWITCH 1 -#define USB_ENDPOINT_SWITCH_SCALE 2 -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless - * host and a device for connection set up, mutual authentication, and - * exchanging short lived session keys. The handshake depends on a CC. - */ -struct usb_handshake { - __u8 bMessageNumber; - __u8 bStatus; - __u8 tTKID[3]; - __u8 bReserved; - __u8 CDID[16]; - __u8 nonce[16]; - __u8 MIC[8]; -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ - -/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC). - * A CC may also be set up using non-wireless secure channels (including - * wired USB!), and some devices may support CCs with multiple hosts. - */ -struct usb_connection_context { - __u8 CHID[16]; /* persistent host id */ - __u8 CDID[16]; /* device id (unique w/in host context) */ - __u8 CK[16]; /* connection key */ -} __attribute__((packed)); - -/*-------------------------------------------------------------------------*/ +#include <uapi/linux/usb/ch9.h> -/* USB 2.0 defines three speeds, here's how Linux identifies them */ - -enum usb_device_speed { - USB_SPEED_UNKNOWN = 0, /* enumerating */ - USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */ - USB_SPEED_HIGH, /* usb 2.0 */ - USB_SPEED_WIRELESS, /* wireless (usb 2.5) */ - USB_SPEED_SUPER, /* usb 3.0 */ -}; - -#ifdef __KERNEL__ /** * usb_speed_string() - Returns human readable-name of the speed. @@ -919,86 +43,4 @@ enum usb_device_speed { */ extern const char *usb_speed_string(enum usb_device_speed speed); -#endif - -enum usb_device_state { - /* NOTATTACHED isn't in the USB spec, and this state acts - * the same as ATTACHED ... but it's clearer this way. - */ - USB_STATE_NOTATTACHED = 0, - - /* chapter 9 and authentication (wireless) device states */ - USB_STATE_ATTACHED, - USB_STATE_POWERED, /* wired */ - USB_STATE_RECONNECTING, /* auth */ - USB_STATE_UNAUTHENTICATED, /* auth */ - USB_STATE_DEFAULT, /* limited function */ - USB_STATE_ADDRESS, - USB_STATE_CONFIGURED, /* most functions */ - - USB_STATE_SUSPENDED - - /* NOTE: there are actually four different SUSPENDED - * states, returning to POWERED, DEFAULT, ADDRESS, or - * CONFIGURED respectively when SOF tokens flow again. - * At this level there's no difference between L1 and L2 - * suspend states. (L2 being original USB 1.1 suspend.) - */ -}; - -enum usb3_link_state { - USB3_LPM_U0 = 0, - USB3_LPM_U1, - USB3_LPM_U2, - USB3_LPM_U3 -}; - -/* - * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1. - * 0xff means the parent hub will accept transitions to U1, but will not - * initiate a transition. - * - * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to - * U1 after that many microseconds. Timeouts of 0x80 to 0xFE are reserved - * values. - * - * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2. - * 0xff means the parent hub will accept transitions to U2, but will not - * initiate a transition. - * - * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to - * U2 after N*256 microseconds. Therefore a U2 timeout value of 0x1 means a U2 - * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means - * 65.024ms. - */ -#define USB3_LPM_DISABLED 0x0 -#define USB3_LPM_U1_MAX_TIMEOUT 0x7F -#define USB3_LPM_U2_MAX_TIMEOUT 0xFE -#define USB3_LPM_DEVICE_INITIATED 0xFF - -struct usb_set_sel_req { - __u8 u1_sel; - __u8 u1_pel; - __le16 u2_sel; - __le16 u2_pel; -} __attribute__ ((packed)); - -/* - * The Set System Exit Latency control transfer provides one byte each for - * U1 SEL and U1 PEL, so the max exit latency is 0xFF. U2 SEL and U2 PEL each - * are two bytes long. - */ -#define USB3_LPM_MAX_U1_SEL_PEL 0xFF -#define USB3_LPM_MAX_U2_SEL_PEL 0xFFFF - -/*-------------------------------------------------------------------------*/ - -/* - * As per USB compliance update, a device that is actively drawing - * more than 100mA from USB must report itself as bus-powered in - * the GetStatus(DEVICE) call. - * http://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34 - */ -#define USB_SELF_POWER_VBUS_MAX_DRAW 100 - #endif /* __LINUX_USB_CH9_H */ diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index f8dda0621800..b09c37e04a91 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -38,6 +38,7 @@ #include <linux/version.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> +#include <linux/log2.h> /* * USB function drivers should return USB_GADGET_DELAYED_STATUS if they @@ -51,6 +52,7 @@ /* big enough to hold our biggest descriptor */ #define USB_COMP_EP0_BUFSIZ 1024 +#define USB_MS_TO_HS_INTERVAL(x) (ilog2((x * 1000 / 125)) + 1) struct usb_configuration; /** @@ -117,7 +119,7 @@ struct usb_configuration; struct usb_function { const char *name; struct usb_gadget_strings **strings; - struct usb_descriptor_header **descriptors; + struct usb_descriptor_header **fs_descriptors; struct usb_descriptor_header **hs_descriptors; struct usb_descriptor_header **ss_descriptors; diff --git a/include/linux/usb/ehci_pdriver.h b/include/linux/usb/ehci_pdriver.h index c9d09f8b7ff2..99238b096f7e 100644 --- a/include/linux/usb/ehci_pdriver.h +++ b/include/linux/usb/ehci_pdriver.h @@ -29,6 +29,8 @@ * initialization. * @port_power_off: set to 1 if the controller needs to be powered down * after initialization. + * @no_io_watchdog: set to 1 if the controller does not need the I/O + * watchdog to run. * * These are general configuration options for the EHCI controller. All of * these options are activating more or less workarounds for some hardware. @@ -39,8 +41,7 @@ struct usb_ehci_pdata { unsigned has_synopsys_hc_bug:1; unsigned big_endian_desc:1; unsigned big_endian_mmio:1; - unsigned port_power_on:1; - unsigned port_power_off:1; + unsigned no_io_watchdog:1; /* Turn on all power and clocks */ int (*power_on)(struct platform_device *pdev); diff --git a/include/linux/usb/ezusb.h b/include/linux/usb/ezusb.h index fc618d8d1e92..639ee45779fb 100644 --- a/include/linux/usb/ezusb.h +++ b/include/linux/usb/ezusb.h @@ -1,16 +1,8 @@ #ifndef __EZUSB_H #define __EZUSB_H - -extern int ezusb_writememory(struct usb_device *dev, int address, - unsigned char *data, int length, __u8 bRequest); - extern int ezusb_fx1_set_reset(struct usb_device *dev, unsigned char reset_bit); -extern int ezusb_fx2_set_reset(struct usb_device *dev, unsigned char reset_bit); - extern int ezusb_fx1_ihex_firmware_download(struct usb_device *dev, const char *firmware_path); -extern int ezusb_fx2_ihex_firmware_download(struct usb_device *dev, - const char *firmware_path); #endif /* __EZUSB_H */ diff --git a/include/linux/usb/functionfs.h b/include/linux/usb/functionfs.h index a843d0851364..65d0a88dbc67 100644 --- a/include/linux/usb/functionfs.h +++ b/include/linux/usb/functionfs.h @@ -1,171 +1,8 @@ #ifndef __LINUX_FUNCTIONFS_H__ #define __LINUX_FUNCTIONFS_H__ 1 +#include <uapi/linux/usb/functionfs.h> -#include <linux/types.h> -#include <linux/ioctl.h> - -#include <linux/usb/ch9.h> - - -enum { - FUNCTIONFS_DESCRIPTORS_MAGIC = 1, - FUNCTIONFS_STRINGS_MAGIC = 2 -}; - - -#ifndef __KERNEL__ - -/* Descriptor of an non-audio endpoint */ -struct usb_endpoint_descriptor_no_audio { - __u8 bLength; - __u8 bDescriptorType; - - __u8 bEndpointAddress; - __u8 bmAttributes; - __le16 wMaxPacketSize; - __u8 bInterval; -} __attribute__((packed)); - - -/* - * All numbers must be in little endian order. - */ - -struct usb_functionfs_descs_head { - __le32 magic; - __le32 length; - __le32 fs_count; - __le32 hs_count; -} __attribute__((packed)); - -/* - * Descriptors format: - * - * | off | name | type | description | - * |-----+-----------+--------------+--------------------------------------| - * | 0 | magic | LE32 | FUNCTIONFS_{FS,HS}_DESCRIPTORS_MAGIC | - * | 4 | length | LE32 | length of the whole data chunk | - * | 8 | fs_count | LE32 | number of full-speed descriptors | - * | 12 | hs_count | LE32 | number of high-speed descriptors | - * | 16 | fs_descrs | Descriptor[] | list of full-speed descriptors | - * | | hs_descrs | Descriptor[] | list of high-speed descriptors | - * - * descs are just valid USB descriptors and have the following format: - * - * | off | name | type | description | - * |-----+-----------------+------+--------------------------| - * | 0 | bLength | U8 | length of the descriptor | - * | 1 | bDescriptorType | U8 | descriptor type | - * | 2 | payload | | descriptor's payload | - */ - -struct usb_functionfs_strings_head { - __le32 magic; - __le32 length; - __le32 str_count; - __le32 lang_count; -} __attribute__((packed)); - -/* - * Strings format: - * - * | off | name | type | description | - * |-----+------------+-----------------------+----------------------------| - * | 0 | magic | LE32 | FUNCTIONFS_STRINGS_MAGIC | - * | 4 | length | LE32 | length of the data chunk | - * | 8 | str_count | LE32 | number of strings | - * | 12 | lang_count | LE32 | number of languages | - * | 16 | stringtab | StringTab[lang_count] | table of strings per lang | - * - * For each language there is one stringtab entry (ie. there are lang_count - * stringtab entires). Each StringTab has following format: - * - * | off | name | type | description | - * |-----+---------+-------------------+------------------------------------| - * | 0 | lang | LE16 | language code | - * | 2 | strings | String[str_count] | array of strings in given language | - * - * For each string there is one strings entry (ie. there are str_count - * string entries). Each String is a NUL terminated string encoded in - * UTF-8. - */ - -#endif - - -/* - * Events are delivered on the ep0 file descriptor, when the user mode driver - * reads from this file descriptor after writing the descriptors. Don't - * stop polling this descriptor. - */ - -enum usb_functionfs_event_type { - FUNCTIONFS_BIND, - FUNCTIONFS_UNBIND, - - FUNCTIONFS_ENABLE, - FUNCTIONFS_DISABLE, - - FUNCTIONFS_SETUP, - - FUNCTIONFS_SUSPEND, - FUNCTIONFS_RESUME -}; - -/* NOTE: this structure must stay the same size and layout on - * both 32-bit and 64-bit kernels. - */ -struct usb_functionfs_event { - union { - /* SETUP: packet; DATA phase i/o precedes next event - *(setup.bmRequestType & USB_DIR_IN) flags direction */ - struct usb_ctrlrequest setup; - } __attribute__((packed)) u; - - /* enum usb_functionfs_event_type */ - __u8 type; - __u8 _pad[3]; -} __attribute__((packed)); - - -/* Endpoint ioctls */ -/* The same as in gadgetfs */ - -/* IN transfers may be reported to the gadget driver as complete - * when the fifo is loaded, before the host reads the data; - * OUT transfers may be reported to the host's "client" driver as - * complete when they're sitting in the FIFO unread. - * THIS returns how many bytes are "unclaimed" in the endpoint fifo - * (needed for precise fault handling, when the hardware allows it) - */ -#define FUNCTIONFS_FIFO_STATUS _IO('g', 1) - -/* discards any unclaimed data in the fifo. */ -#define FUNCTIONFS_FIFO_FLUSH _IO('g', 2) - -/* resets endpoint halt+toggle; used to implement set_interface. - * some hardware (like pxa2xx) can't support this. - */ -#define FUNCTIONFS_CLEAR_HALT _IO('g', 3) - -/* Specific for functionfs */ - -/* - * Returns reverse mapping of an interface. Called on EP0. If there - * is no such interface returns -EDOM. If function is not active - * returns -ENODEV. - */ -#define FUNCTIONFS_INTERFACE_REVMAP _IO('g', 128) - -/* - * Returns real bEndpointAddress of an endpoint. If function is not - * active returns -ENODEV. - */ -#define FUNCTIONFS_ENDPOINT_REVMAP _IO('g', 129) - - -#ifdef __KERNEL__ struct ffs_data; struct usb_composite_dev; @@ -197,5 +34,3 @@ static void functionfs_release_dev_callback(struct ffs_data *ffs_data) #endif - -#endif diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 5b6e50888248..0af6569b8cc6 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -939,6 +939,13 @@ static inline void usb_free_descriptors(struct usb_descriptor_header **v) kfree(v); } +struct usb_function; +int usb_assign_descriptors(struct usb_function *f, + struct usb_descriptor_header **fs, + struct usb_descriptor_header **hs, + struct usb_descriptor_header **ss); +void usb_free_all_descriptors(struct usb_function *f); + /*-------------------------------------------------------------------------*/ /* utility to simplify map/unmap of usb_requests to/from DMA */ diff --git a/include/linux/usb/gadgetfs.h b/include/linux/usb/gadgetfs.h deleted file mode 100644 index 0bb12e0d4f8f..000000000000 --- a/include/linux/usb/gadgetfs.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * Filesystem based user-mode API to USB Gadget controller hardware - * - * Other than ep0 operations, most things are done by read() and write() - * on endpoint files found in one directory. They are configured by - * writing descriptors, and then may be used for normal stream style - * i/o requests. When ep0 is configured, the device can enumerate; - * when it's closed, the device disconnects from usb. Operations on - * ep0 require ioctl() operations. - * - * Configuration and device descriptors get written to /dev/gadget/$CHIP, - * which may then be used to read usb_gadgetfs_event structs. The driver - * may activate endpoints as it handles SET_CONFIGURATION setup events, - * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT - * then performing data transfers by reading or writing. - */ - -#ifndef __LINUX_USB_GADGETFS_H -#define __LINUX_USB_GADGETFS_H - -#include <linux/types.h> -#include <linux/ioctl.h> - -#include <linux/usb/ch9.h> - -/* - * Events are delivered on the ep0 file descriptor, when the user mode driver - * reads from this file descriptor after writing the descriptors. Don't - * stop polling this descriptor. - */ - -enum usb_gadgetfs_event_type { - GADGETFS_NOP = 0, - - GADGETFS_CONNECT, - GADGETFS_DISCONNECT, - GADGETFS_SETUP, - GADGETFS_SUSPEND, - /* and likely more ! */ -}; - -/* NOTE: this structure must stay the same size and layout on - * both 32-bit and 64-bit kernels. - */ -struct usb_gadgetfs_event { - union { - /* NOP, DISCONNECT, SUSPEND: nothing - * ... some hardware can't report disconnection - */ - - /* CONNECT: just the speed */ - enum usb_device_speed speed; - - /* SETUP: packet; DATA phase i/o precedes next event - *(setup.bmRequestType & USB_DIR_IN) flags direction - * ... includes SET_CONFIGURATION, SET_INTERFACE - */ - struct usb_ctrlrequest setup; - } u; - enum usb_gadgetfs_event_type type; -}; - - -/* The 'g' code is also used by printer gadget ioctl requests. - * Don't add any colliding codes to either driver, and keep - * them in unique ranges (size 0x20 for now). - */ - -/* endpoint ioctls */ - -/* IN transfers may be reported to the gadget driver as complete - * when the fifo is loaded, before the host reads the data; - * OUT transfers may be reported to the host's "client" driver as - * complete when they're sitting in the FIFO unread. - * THIS returns how many bytes are "unclaimed" in the endpoint fifo - * (needed for precise fault handling, when the hardware allows it) - */ -#define GADGETFS_FIFO_STATUS _IO('g', 1) - -/* discards any unclaimed data in the fifo. */ -#define GADGETFS_FIFO_FLUSH _IO('g', 2) - -/* resets endpoint halt+toggle; used to implement set_interface. - * some hardware (like pxa2xx) can't support this. - */ -#define GADGETFS_CLEAR_HALT _IO('g', 3) - -#endif /* __LINUX_USB_GADGETFS_H */ diff --git a/include/linux/usb/midi.h b/include/linux/usb/midi.h deleted file mode 100644 index c8c52e3c91de..000000000000 --- a/include/linux/usb/midi.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - * <linux/usb/midi.h> -- USB MIDI definitions. - * - * Copyright (C) 2006 Thumtronics Pty Ltd. - * Developed for Thumtronics by Grey Innovation - * Ben Williamson <ben.williamson@greyinnovation.com> - * - * This software is distributed under the terms of the GNU General Public - * License ("GPL") version 2, as published by the Free Software Foundation. - * - * This file holds USB constants and structures defined - * by the USB Device Class Definition for MIDI Devices. - * Comments below reference relevant sections of that document: - * - * http://www.usb.org/developers/devclass_docs/midi10.pdf - */ - -#ifndef __LINUX_USB_MIDI_H -#define __LINUX_USB_MIDI_H - -#include <linux/types.h> - -/* A.1 MS Class-Specific Interface Descriptor Subtypes */ -#define USB_MS_HEADER 0x01 -#define USB_MS_MIDI_IN_JACK 0x02 -#define USB_MS_MIDI_OUT_JACK 0x03 -#define USB_MS_ELEMENT 0x04 - -/* A.2 MS Class-Specific Endpoint Descriptor Subtypes */ -#define USB_MS_GENERAL 0x01 - -/* A.3 MS MIDI IN and OUT Jack Types */ -#define USB_MS_EMBEDDED 0x01 -#define USB_MS_EXTERNAL 0x02 - -/* 6.1.2.1 Class-Specific MS Interface Header Descriptor */ -struct usb_ms_header_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubtype; - __le16 bcdMSC; - __le16 wTotalLength; -} __attribute__ ((packed)); - -#define USB_DT_MS_HEADER_SIZE 7 - -/* 6.1.2.2 MIDI IN Jack Descriptor */ -struct usb_midi_in_jack_descriptor { - __u8 bLength; - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* USB_MS_MIDI_IN_JACK */ - __u8 bJackType; /* USB_MS_EMBEDDED/EXTERNAL */ - __u8 bJackID; - __u8 iJack; -} __attribute__ ((packed)); - -#define USB_DT_MIDI_IN_SIZE 6 - -struct usb_midi_source_pin { - __u8 baSourceID; - __u8 baSourcePin; -} __attribute__ ((packed)); - -/* 6.1.2.3 MIDI OUT Jack Descriptor */ -struct usb_midi_out_jack_descriptor { - __u8 bLength; - __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */ - __u8 bDescriptorSubtype; /* USB_MS_MIDI_OUT_JACK */ - __u8 bJackType; /* USB_MS_EMBEDDED/EXTERNAL */ - __u8 bJackID; - __u8 bNrInputPins; /* p */ - struct usb_midi_source_pin pins[]; /* [p] */ - /*__u8 iJack; -- omitted due to variable-sized pins[] */ -} __attribute__ ((packed)); - -#define USB_DT_MIDI_OUT_SIZE(p) (7 + 2 * (p)) - -/* As above, but more useful for defining your own descriptors: */ -#define DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(p) \ -struct usb_midi_out_jack_descriptor_##p { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubtype; \ - __u8 bJackType; \ - __u8 bJackID; \ - __u8 bNrInputPins; \ - struct usb_midi_source_pin pins[p]; \ - __u8 iJack; \ -} __attribute__ ((packed)) - -/* 6.2.2 Class-Specific MS Bulk Data Endpoint Descriptor */ -struct usb_ms_endpoint_descriptor { - __u8 bLength; /* 4+n */ - __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */ - __u8 bDescriptorSubtype; /* USB_MS_GENERAL */ - __u8 bNumEmbMIDIJack; /* n */ - __u8 baAssocJackID[]; /* [n] */ -} __attribute__ ((packed)); - -#define USB_DT_MS_ENDPOINT_SIZE(n) (4 + (n)) - -/* As above, but more useful for defining your own descriptors: */ -#define DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(n) \ -struct usb_ms_endpoint_descriptor_##n { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubtype; \ - __u8 bNumEmbMIDIJack; \ - __u8 baAssocJackID[n]; \ -} __attribute__ ((packed)) - -#endif /* __LINUX_USB_MIDI_H */ diff --git a/include/linux/usb/ohci_pdriver.h b/include/linux/usb/ohci_pdriver.h index 74e7755168b7..012f2b7eb2b6 100644 --- a/include/linux/usb/ohci_pdriver.h +++ b/include/linux/usb/ohci_pdriver.h @@ -25,6 +25,7 @@ * @big_endian_desc: BE descriptors * @big_endian_mmio: BE registers * @no_big_frame_no: no big endian frame_no shift + * @num_ports: number of ports * * These are general configuration options for the OHCI controller. All of * these options are activating more or less workarounds for some hardware. @@ -33,6 +34,7 @@ struct usb_ohci_pdata { unsigned big_endian_desc:1; unsigned big_endian_mmio:1; unsigned no_big_frame_no:1; + unsigned int num_ports; /* Turn on all power and clocks */ int (*power_on)(struct platform_device *pdev); diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h index 06b5bae35b29..a29ae1eb9346 100644 --- a/include/linux/usb/phy.h +++ b/include/linux/usb/phy.h @@ -10,6 +10,7 @@ #define __LINUX_USB_PHY_H #include <linux/notifier.h> +#include <linux/usb.h> enum usb_phy_events { USB_EVENT_NONE, /* no events or cable disconnected */ @@ -99,8 +100,10 @@ struct usb_phy { int suspend); /* notify phy connect status change */ - int (*notify_connect)(struct usb_phy *x, int port); - int (*notify_disconnect)(struct usb_phy *x, int port); + int (*notify_connect)(struct usb_phy *x, + enum usb_device_speed speed); + int (*notify_disconnect)(struct usb_phy *x, + enum usb_device_speed speed); }; @@ -189,19 +192,19 @@ usb_phy_set_suspend(struct usb_phy *x, int suspend) } static inline int -usb_phy_notify_connect(struct usb_phy *x, int port) +usb_phy_notify_connect(struct usb_phy *x, enum usb_device_speed speed) { if (x->notify_connect) - return x->notify_connect(x, port); + return x->notify_connect(x, speed); else return 0; } static inline int -usb_phy_notify_disconnect(struct usb_phy *x, int port) +usb_phy_notify_disconnect(struct usb_phy *x, enum usb_device_speed speed) { if (x->notify_disconnect) - return x->notify_disconnect(x, port); + return x->notify_disconnect(x, speed); else return 0; } diff --git a/include/linux/usb/tmc.h b/include/linux/usb/tmc.h deleted file mode 100644 index c045ae12556c..000000000000 --- a/include/linux/usb/tmc.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright (C) 2007 Stefan Kopp, Gechingen, Germany - * Copyright (C) 2008 Novell, Inc. - * Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de> - * - * This file holds USB constants defined by the USB Device Class - * Definition for Test and Measurement devices published by the USB-IF. - * - * It also has the ioctl definitions for the usbtmc kernel driver that - * userspace needs to know about. - */ - -#ifndef __LINUX_USB_TMC_H -#define __LINUX_USB_TMC_H - -/* USB TMC status values */ -#define USBTMC_STATUS_SUCCESS 0x01 -#define USBTMC_STATUS_PENDING 0x02 -#define USBTMC_STATUS_FAILED 0x80 -#define USBTMC_STATUS_TRANSFER_NOT_IN_PROGRESS 0x81 -#define USBTMC_STATUS_SPLIT_NOT_IN_PROGRESS 0x82 -#define USBTMC_STATUS_SPLIT_IN_PROGRESS 0x83 - -/* USB TMC requests values */ -#define USBTMC_REQUEST_INITIATE_ABORT_BULK_OUT 1 -#define USBTMC_REQUEST_CHECK_ABORT_BULK_OUT_STATUS 2 -#define USBTMC_REQUEST_INITIATE_ABORT_BULK_IN 3 -#define USBTMC_REQUEST_CHECK_ABORT_BULK_IN_STATUS 4 -#define USBTMC_REQUEST_INITIATE_CLEAR 5 -#define USBTMC_REQUEST_CHECK_CLEAR_STATUS 6 -#define USBTMC_REQUEST_GET_CAPABILITIES 7 -#define USBTMC_REQUEST_INDICATOR_PULSE 64 - -/* Request values for USBTMC driver's ioctl entry point */ -#define USBTMC_IOC_NR 91 -#define USBTMC_IOCTL_INDICATOR_PULSE _IO(USBTMC_IOC_NR, 1) -#define USBTMC_IOCTL_CLEAR _IO(USBTMC_IOC_NR, 2) -#define USBTMC_IOCTL_ABORT_BULK_OUT _IO(USBTMC_IOC_NR, 3) -#define USBTMC_IOCTL_ABORT_BULK_IN _IO(USBTMC_IOC_NR, 4) -#define USBTMC_IOCTL_CLEAR_OUT_HALT _IO(USBTMC_IOC_NR, 6) -#define USBTMC_IOCTL_CLEAR_IN_HALT _IO(USBTMC_IOC_NR, 7) - -#endif diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index ddbbb7de894b..bd45eb7bedc8 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -69,6 +69,7 @@ struct usbnet { # define EVENT_DEV_ASLEEP 6 # define EVENT_DEV_OPEN 7 # define EVENT_DEVICE_REPORT_IDLE 8 +# define EVENT_NO_RUNTIME_PM 9 }; static inline struct usb_driver *driver_of(struct usb_interface *intf) @@ -163,6 +164,16 @@ extern int usbnet_resume(struct usb_interface *); extern void usbnet_disconnect(struct usb_interface *); extern void usbnet_device_suggests_idle(struct usbnet *dev); +extern int usbnet_read_cmd(struct usbnet *dev, u8 cmd, u8 reqtype, + u16 value, u16 index, void *data, u16 size); +extern int usbnet_write_cmd(struct usbnet *dev, u8 cmd, u8 reqtype, + u16 value, u16 index, const void *data, u16 size); +extern int usbnet_read_cmd_nopm(struct usbnet *dev, u8 cmd, u8 reqtype, + u16 value, u16 index, void *data, u16 size); +extern int usbnet_write_cmd_nopm(struct usbnet *dev, u8 cmd, u8 reqtype, + u16 value, u16 index, const void *data, u16 size); +extern int usbnet_write_cmd_async(struct usbnet *dev, u8 cmd, u8 reqtype, + u16 value, u16 index, const void *data, u16 size); /* Drivers that reuse some of the standard USB CDC infrastructure * (notably, using multiple interfaces according to the CDC @@ -230,4 +241,6 @@ extern void usbnet_set_msglevel(struct net_device *, u32); extern void usbnet_get_drvinfo(struct net_device *, struct ethtool_drvinfo *); extern int usbnet_nway_reset(struct net_device *net); +extern int usbnet_manage_power(struct usbnet *, int); + #endif /* __LINUX_USB_USBNET_H */ diff --git a/include/linux/usb/video.h b/include/linux/usb/video.h deleted file mode 100644 index 3b3b95e01f71..000000000000 --- a/include/linux/usb/video.h +++ /dev/null @@ -1,568 +0,0 @@ -/* - * USB Video Class definitions. - * - * Copyright (C) 2009 Laurent Pinchart <laurent.pinchart@skynet.be> - * - * This file holds USB constants and structures defined by the USB Device - * Class Definition for Video Devices. Unless otherwise stated, comments - * below reference relevant sections of the USB Video Class 1.1 specification - * available at - * - * http://www.usb.org/developers/devclass_docs/USB_Video_Class_1_1.zip - */ - -#ifndef __LINUX_USB_VIDEO_H -#define __LINUX_USB_VIDEO_H - -#include <linux/types.h> - -/* -------------------------------------------------------------------------- - * UVC constants - */ - -/* A.2. Video Interface Subclass Codes */ -#define UVC_SC_UNDEFINED 0x00 -#define UVC_SC_VIDEOCONTROL 0x01 -#define UVC_SC_VIDEOSTREAMING 0x02 -#define UVC_SC_VIDEO_INTERFACE_COLLECTION 0x03 - -/* A.3. Video Interface Protocol Codes */ -#define UVC_PC_PROTOCOL_UNDEFINED 0x00 - -/* A.5. Video Class-Specific VC Interface Descriptor Subtypes */ -#define UVC_VC_DESCRIPTOR_UNDEFINED 0x00 -#define UVC_VC_HEADER 0x01 -#define UVC_VC_INPUT_TERMINAL 0x02 -#define UVC_VC_OUTPUT_TERMINAL 0x03 -#define UVC_VC_SELECTOR_UNIT 0x04 -#define UVC_VC_PROCESSING_UNIT 0x05 -#define UVC_VC_EXTENSION_UNIT 0x06 - -/* A.6. Video Class-Specific VS Interface Descriptor Subtypes */ -#define UVC_VS_UNDEFINED 0x00 -#define UVC_VS_INPUT_HEADER 0x01 -#define UVC_VS_OUTPUT_HEADER 0x02 -#define UVC_VS_STILL_IMAGE_FRAME 0x03 -#define UVC_VS_FORMAT_UNCOMPRESSED 0x04 -#define UVC_VS_FRAME_UNCOMPRESSED 0x05 -#define UVC_VS_FORMAT_MJPEG 0x06 -#define UVC_VS_FRAME_MJPEG 0x07 -#define UVC_VS_FORMAT_MPEG2TS 0x0a -#define UVC_VS_FORMAT_DV 0x0c -#define UVC_VS_COLORFORMAT 0x0d -#define UVC_VS_FORMAT_FRAME_BASED 0x10 -#define UVC_VS_FRAME_FRAME_BASED 0x11 -#define UVC_VS_FORMAT_STREAM_BASED 0x12 - -/* A.7. Video Class-Specific Endpoint Descriptor Subtypes */ -#define UVC_EP_UNDEFINED 0x00 -#define UVC_EP_GENERAL 0x01 -#define UVC_EP_ENDPOINT 0x02 -#define UVC_EP_INTERRUPT 0x03 - -/* A.8. Video Class-Specific Request Codes */ -#define UVC_RC_UNDEFINED 0x00 -#define UVC_SET_CUR 0x01 -#define UVC_GET_CUR 0x81 -#define UVC_GET_MIN 0x82 -#define UVC_GET_MAX 0x83 -#define UVC_GET_RES 0x84 -#define UVC_GET_LEN 0x85 -#define UVC_GET_INFO 0x86 -#define UVC_GET_DEF 0x87 - -/* A.9.1. VideoControl Interface Control Selectors */ -#define UVC_VC_CONTROL_UNDEFINED 0x00 -#define UVC_VC_VIDEO_POWER_MODE_CONTROL 0x01 -#define UVC_VC_REQUEST_ERROR_CODE_CONTROL 0x02 - -/* A.9.2. Terminal Control Selectors */ -#define UVC_TE_CONTROL_UNDEFINED 0x00 - -/* A.9.3. Selector Unit Control Selectors */ -#define UVC_SU_CONTROL_UNDEFINED 0x00 -#define UVC_SU_INPUT_SELECT_CONTROL 0x01 - -/* A.9.4. Camera Terminal Control Selectors */ -#define UVC_CT_CONTROL_UNDEFINED 0x00 -#define UVC_CT_SCANNING_MODE_CONTROL 0x01 -#define UVC_CT_AE_MODE_CONTROL 0x02 -#define UVC_CT_AE_PRIORITY_CONTROL 0x03 -#define UVC_CT_EXPOSURE_TIME_ABSOLUTE_CONTROL 0x04 -#define UVC_CT_EXPOSURE_TIME_RELATIVE_CONTROL 0x05 -#define UVC_CT_FOCUS_ABSOLUTE_CONTROL 0x06 -#define UVC_CT_FOCUS_RELATIVE_CONTROL 0x07 -#define UVC_CT_FOCUS_AUTO_CONTROL 0x08 -#define UVC_CT_IRIS_ABSOLUTE_CONTROL 0x09 -#define UVC_CT_IRIS_RELATIVE_CONTROL 0x0a -#define UVC_CT_ZOOM_ABSOLUTE_CONTROL 0x0b -#define UVC_CT_ZOOM_RELATIVE_CONTROL 0x0c -#define UVC_CT_PANTILT_ABSOLUTE_CONTROL 0x0d -#define UVC_CT_PANTILT_RELATIVE_CONTROL 0x0e -#define UVC_CT_ROLL_ABSOLUTE_CONTROL 0x0f -#define UVC_CT_ROLL_RELATIVE_CONTROL 0x10 -#define UVC_CT_PRIVACY_CONTROL 0x11 - -/* A.9.5. Processing Unit Control Selectors */ -#define UVC_PU_CONTROL_UNDEFINED 0x00 -#define UVC_PU_BACKLIGHT_COMPENSATION_CONTROL 0x01 -#define UVC_PU_BRIGHTNESS_CONTROL 0x02 -#define UVC_PU_CONTRAST_CONTROL 0x03 -#define UVC_PU_GAIN_CONTROL 0x04 -#define UVC_PU_POWER_LINE_FREQUENCY_CONTROL 0x05 -#define UVC_PU_HUE_CONTROL 0x06 -#define UVC_PU_SATURATION_CONTROL 0x07 -#define UVC_PU_SHARPNESS_CONTROL 0x08 -#define UVC_PU_GAMMA_CONTROL 0x09 -#define UVC_PU_WHITE_BALANCE_TEMPERATURE_CONTROL 0x0a -#define UVC_PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL 0x0b -#define UVC_PU_WHITE_BALANCE_COMPONENT_CONTROL 0x0c -#define UVC_PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL 0x0d -#define UVC_PU_DIGITAL_MULTIPLIER_CONTROL 0x0e -#define UVC_PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL 0x0f -#define UVC_PU_HUE_AUTO_CONTROL 0x10 -#define UVC_PU_ANALOG_VIDEO_STANDARD_CONTROL 0x11 -#define UVC_PU_ANALOG_LOCK_STATUS_CONTROL 0x12 - -/* A.9.7. VideoStreaming Interface Control Selectors */ -#define UVC_VS_CONTROL_UNDEFINED 0x00 -#define UVC_VS_PROBE_CONTROL 0x01 -#define UVC_VS_COMMIT_CONTROL 0x02 -#define UVC_VS_STILL_PROBE_CONTROL 0x03 -#define UVC_VS_STILL_COMMIT_CONTROL 0x04 -#define UVC_VS_STILL_IMAGE_TRIGGER_CONTROL 0x05 -#define UVC_VS_STREAM_ERROR_CODE_CONTROL 0x06 -#define UVC_VS_GENERATE_KEY_FRAME_CONTROL 0x07 -#define UVC_VS_UPDATE_FRAME_SEGMENT_CONTROL 0x08 -#define UVC_VS_SYNC_DELAY_CONTROL 0x09 - -/* B.1. USB Terminal Types */ -#define UVC_TT_VENDOR_SPECIFIC 0x0100 -#define UVC_TT_STREAMING 0x0101 - -/* B.2. Input Terminal Types */ -#define UVC_ITT_VENDOR_SPECIFIC 0x0200 -#define UVC_ITT_CAMERA 0x0201 -#define UVC_ITT_MEDIA_TRANSPORT_INPUT 0x0202 - -/* B.3. Output Terminal Types */ -#define UVC_OTT_VENDOR_SPECIFIC 0x0300 -#define UVC_OTT_DISPLAY 0x0301 -#define UVC_OTT_MEDIA_TRANSPORT_OUTPUT 0x0302 - -/* B.4. External Terminal Types */ -#define UVC_EXTERNAL_VENDOR_SPECIFIC 0x0400 -#define UVC_COMPOSITE_CONNECTOR 0x0401 -#define UVC_SVIDEO_CONNECTOR 0x0402 -#define UVC_COMPONENT_CONNECTOR 0x0403 - -/* 2.4.2.2. Status Packet Type */ -#define UVC_STATUS_TYPE_CONTROL 1 -#define UVC_STATUS_TYPE_STREAMING 2 - -/* 2.4.3.3. Payload Header Information */ -#define UVC_STREAM_EOH (1 << 7) -#define UVC_STREAM_ERR (1 << 6) -#define UVC_STREAM_STI (1 << 5) -#define UVC_STREAM_RES (1 << 4) -#define UVC_STREAM_SCR (1 << 3) -#define UVC_STREAM_PTS (1 << 2) -#define UVC_STREAM_EOF (1 << 1) -#define UVC_STREAM_FID (1 << 0) - -/* 4.1.2. Control Capabilities */ -#define UVC_CONTROL_CAP_GET (1 << 0) -#define UVC_CONTROL_CAP_SET (1 << 1) -#define UVC_CONTROL_CAP_DISABLED (1 << 2) -#define UVC_CONTROL_CAP_AUTOUPDATE (1 << 3) -#define UVC_CONTROL_CAP_ASYNCHRONOUS (1 << 4) - -/* ------------------------------------------------------------------------ - * UVC structures - */ - -/* All UVC descriptors have these 3 fields at the beginning */ -struct uvc_descriptor_header { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; -} __attribute__((packed)); - -/* 3.7.2. Video Control Interface Header Descriptor */ -struct uvc_header_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u16 bcdUVC; - __u16 wTotalLength; - __u32 dwClockFrequency; - __u8 bInCollection; - __u8 baInterfaceNr[]; -} __attribute__((__packed__)); - -#define UVC_DT_HEADER_SIZE(n) (12+(n)) - -#define UVC_HEADER_DESCRIPTOR(n) \ - uvc_header_descriptor_##n - -#define DECLARE_UVC_HEADER_DESCRIPTOR(n) \ -struct UVC_HEADER_DESCRIPTOR(n) { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubType; \ - __u16 bcdUVC; \ - __u16 wTotalLength; \ - __u32 dwClockFrequency; \ - __u8 bInCollection; \ - __u8 baInterfaceNr[n]; \ -} __attribute__ ((packed)) - -/* 3.7.2.1. Input Terminal Descriptor */ -struct uvc_input_terminal_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bTerminalID; - __u16 wTerminalType; - __u8 bAssocTerminal; - __u8 iTerminal; -} __attribute__((__packed__)); - -#define UVC_DT_INPUT_TERMINAL_SIZE 8 - -/* 3.7.2.2. Output Terminal Descriptor */ -struct uvc_output_terminal_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bTerminalID; - __u16 wTerminalType; - __u8 bAssocTerminal; - __u8 bSourceID; - __u8 iTerminal; -} __attribute__((__packed__)); - -#define UVC_DT_OUTPUT_TERMINAL_SIZE 9 - -/* 3.7.2.3. Camera Terminal Descriptor */ -struct uvc_camera_terminal_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bTerminalID; - __u16 wTerminalType; - __u8 bAssocTerminal; - __u8 iTerminal; - __u16 wObjectiveFocalLengthMin; - __u16 wObjectiveFocalLengthMax; - __u16 wOcularFocalLength; - __u8 bControlSize; - __u8 bmControls[3]; -} __attribute__((__packed__)); - -#define UVC_DT_CAMERA_TERMINAL_SIZE(n) (15+(n)) - -/* 3.7.2.4. Selector Unit Descriptor */ -struct uvc_selector_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bUnitID; - __u8 bNrInPins; - __u8 baSourceID[0]; - __u8 iSelector; -} __attribute__((__packed__)); - -#define UVC_DT_SELECTOR_UNIT_SIZE(n) (6+(n)) - -#define UVC_SELECTOR_UNIT_DESCRIPTOR(n) \ - uvc_selector_unit_descriptor_##n - -#define DECLARE_UVC_SELECTOR_UNIT_DESCRIPTOR(n) \ -struct UVC_SELECTOR_UNIT_DESCRIPTOR(n) { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubType; \ - __u8 bUnitID; \ - __u8 bNrInPins; \ - __u8 baSourceID[n]; \ - __u8 iSelector; \ -} __attribute__ ((packed)) - -/* 3.7.2.5. Processing Unit Descriptor */ -struct uvc_processing_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bUnitID; - __u8 bSourceID; - __u16 wMaxMultiplier; - __u8 bControlSize; - __u8 bmControls[2]; - __u8 iProcessing; -} __attribute__((__packed__)); - -#define UVC_DT_PROCESSING_UNIT_SIZE(n) (9+(n)) - -/* 3.7.2.6. Extension Unit Descriptor */ -struct uvc_extension_unit_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bUnitID; - __u8 guidExtensionCode[16]; - __u8 bNumControls; - __u8 bNrInPins; - __u8 baSourceID[0]; - __u8 bControlSize; - __u8 bmControls[0]; - __u8 iExtension; -} __attribute__((__packed__)); - -#define UVC_DT_EXTENSION_UNIT_SIZE(p, n) (24+(p)+(n)) - -#define UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) \ - uvc_extension_unit_descriptor_##p_##n - -#define DECLARE_UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) \ -struct UVC_EXTENSION_UNIT_DESCRIPTOR(p, n) { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubType; \ - __u8 bUnitID; \ - __u8 guidExtensionCode[16]; \ - __u8 bNumControls; \ - __u8 bNrInPins; \ - __u8 baSourceID[p]; \ - __u8 bControlSize; \ - __u8 bmControls[n]; \ - __u8 iExtension; \ -} __attribute__ ((packed)) - -/* 3.8.2.2. Video Control Interrupt Endpoint Descriptor */ -struct uvc_control_endpoint_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u16 wMaxTransferSize; -} __attribute__((__packed__)); - -#define UVC_DT_CONTROL_ENDPOINT_SIZE 5 - -/* 3.9.2.1. Input Header Descriptor */ -struct uvc_input_header_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bNumFormats; - __u16 wTotalLength; - __u8 bEndpointAddress; - __u8 bmInfo; - __u8 bTerminalLink; - __u8 bStillCaptureMethod; - __u8 bTriggerSupport; - __u8 bTriggerUsage; - __u8 bControlSize; - __u8 bmaControls[]; -} __attribute__((__packed__)); - -#define UVC_DT_INPUT_HEADER_SIZE(n, p) (13+(n*p)) - -#define UVC_INPUT_HEADER_DESCRIPTOR(n, p) \ - uvc_input_header_descriptor_##n_##p - -#define DECLARE_UVC_INPUT_HEADER_DESCRIPTOR(n, p) \ -struct UVC_INPUT_HEADER_DESCRIPTOR(n, p) { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubType; \ - __u8 bNumFormats; \ - __u16 wTotalLength; \ - __u8 bEndpointAddress; \ - __u8 bmInfo; \ - __u8 bTerminalLink; \ - __u8 bStillCaptureMethod; \ - __u8 bTriggerSupport; \ - __u8 bTriggerUsage; \ - __u8 bControlSize; \ - __u8 bmaControls[p][n]; \ -} __attribute__ ((packed)) - -/* 3.9.2.2. Output Header Descriptor */ -struct uvc_output_header_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bNumFormats; - __u16 wTotalLength; - __u8 bEndpointAddress; - __u8 bTerminalLink; - __u8 bControlSize; - __u8 bmaControls[]; -} __attribute__((__packed__)); - -#define UVC_DT_OUTPUT_HEADER_SIZE(n, p) (9+(n*p)) - -#define UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) \ - uvc_output_header_descriptor_##n_##p - -#define DECLARE_UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) \ -struct UVC_OUTPUT_HEADER_DESCRIPTOR(n, p) { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubType; \ - __u8 bNumFormats; \ - __u16 wTotalLength; \ - __u8 bEndpointAddress; \ - __u8 bTerminalLink; \ - __u8 bControlSize; \ - __u8 bmaControls[p][n]; \ -} __attribute__ ((packed)) - -/* 3.9.2.6. Color matching descriptor */ -struct uvc_color_matching_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bColorPrimaries; - __u8 bTransferCharacteristics; - __u8 bMatrixCoefficients; -} __attribute__((__packed__)); - -#define UVC_DT_COLOR_MATCHING_SIZE 6 - -/* 4.3.1.1. Video Probe and Commit Controls */ -struct uvc_streaming_control { - __u16 bmHint; - __u8 bFormatIndex; - __u8 bFrameIndex; - __u32 dwFrameInterval; - __u16 wKeyFrameRate; - __u16 wPFrameRate; - __u16 wCompQuality; - __u16 wCompWindowSize; - __u16 wDelay; - __u32 dwMaxVideoFrameSize; - __u32 dwMaxPayloadTransferSize; - __u32 dwClockFrequency; - __u8 bmFramingInfo; - __u8 bPreferedVersion; - __u8 bMinVersion; - __u8 bMaxVersion; -} __attribute__((__packed__)); - -/* Uncompressed Payload - 3.1.1. Uncompressed Video Format Descriptor */ -struct uvc_format_uncompressed { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bFormatIndex; - __u8 bNumFrameDescriptors; - __u8 guidFormat[16]; - __u8 bBitsPerPixel; - __u8 bDefaultFrameIndex; - __u8 bAspectRatioX; - __u8 bAspectRatioY; - __u8 bmInterfaceFlags; - __u8 bCopyProtect; -} __attribute__((__packed__)); - -#define UVC_DT_FORMAT_UNCOMPRESSED_SIZE 27 - -/* Uncompressed Payload - 3.1.2. Uncompressed Video Frame Descriptor */ -struct uvc_frame_uncompressed { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bFrameIndex; - __u8 bmCapabilities; - __u16 wWidth; - __u16 wHeight; - __u32 dwMinBitRate; - __u32 dwMaxBitRate; - __u32 dwMaxVideoFrameBufferSize; - __u32 dwDefaultFrameInterval; - __u8 bFrameIntervalType; - __u32 dwFrameInterval[]; -} __attribute__((__packed__)); - -#define UVC_DT_FRAME_UNCOMPRESSED_SIZE(n) (26+4*(n)) - -#define UVC_FRAME_UNCOMPRESSED(n) \ - uvc_frame_uncompressed_##n - -#define DECLARE_UVC_FRAME_UNCOMPRESSED(n) \ -struct UVC_FRAME_UNCOMPRESSED(n) { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubType; \ - __u8 bFrameIndex; \ - __u8 bmCapabilities; \ - __u16 wWidth; \ - __u16 wHeight; \ - __u32 dwMinBitRate; \ - __u32 dwMaxBitRate; \ - __u32 dwMaxVideoFrameBufferSize; \ - __u32 dwDefaultFrameInterval; \ - __u8 bFrameIntervalType; \ - __u32 dwFrameInterval[n]; \ -} __attribute__ ((packed)) - -/* MJPEG Payload - 3.1.1. MJPEG Video Format Descriptor */ -struct uvc_format_mjpeg { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bFormatIndex; - __u8 bNumFrameDescriptors; - __u8 bmFlags; - __u8 bDefaultFrameIndex; - __u8 bAspectRatioX; - __u8 bAspectRatioY; - __u8 bmInterfaceFlags; - __u8 bCopyProtect; -} __attribute__((__packed__)); - -#define UVC_DT_FORMAT_MJPEG_SIZE 11 - -/* MJPEG Payload - 3.1.2. MJPEG Video Frame Descriptor */ -struct uvc_frame_mjpeg { - __u8 bLength; - __u8 bDescriptorType; - __u8 bDescriptorSubType; - __u8 bFrameIndex; - __u8 bmCapabilities; - __u16 wWidth; - __u16 wHeight; - __u32 dwMinBitRate; - __u32 dwMaxBitRate; - __u32 dwMaxVideoFrameBufferSize; - __u32 dwDefaultFrameInterval; - __u8 bFrameIntervalType; - __u32 dwFrameInterval[]; -} __attribute__((__packed__)); - -#define UVC_DT_FRAME_MJPEG_SIZE(n) (26+4*(n)) - -#define UVC_FRAME_MJPEG(n) \ - uvc_frame_mjpeg_##n - -#define DECLARE_UVC_FRAME_MJPEG(n) \ -struct UVC_FRAME_MJPEG(n) { \ - __u8 bLength; \ - __u8 bDescriptorType; \ - __u8 bDescriptorSubType; \ - __u8 bFrameIndex; \ - __u8 bmCapabilities; \ - __u16 wWidth; \ - __u16 wHeight; \ - __u32 dwMinBitRate; \ - __u32 dwMaxBitRate; \ - __u32 dwMaxVideoFrameBufferSize; \ - __u32 dwDefaultFrameInterval; \ - __u8 bFrameIntervalType; \ - __u32 dwFrameInterval[n]; \ -} __attribute__ ((packed)) - -#endif /* __LINUX_USB_VIDEO_H */ - diff --git a/include/linux/user_namespace.h b/include/linux/user_namespace.h index 95142cae446a..b9bd2e6c73cc 100644 --- a/include/linux/user_namespace.h +++ b/include/linux/user_namespace.h @@ -25,6 +25,7 @@ struct user_namespace { struct user_namespace *parent; kuid_t owner; kgid_t group; + unsigned int proc_inum; }; extern struct user_namespace init_user_ns; @@ -39,6 +40,7 @@ static inline struct user_namespace *get_user_ns(struct user_namespace *ns) } extern int create_user_ns(struct cred *new); +extern int unshare_userns(unsigned long unshare_flags, struct cred **new_cred); extern void free_user_ns(struct kref *kref); static inline void put_user_ns(struct user_namespace *ns) @@ -66,6 +68,14 @@ static inline int create_user_ns(struct cred *new) return -EINVAL; } +static inline int unshare_userns(unsigned long unshare_flags, + struct cred **new_cred) +{ + if (unshare_flags & CLONE_NEWUSER) + return -EINVAL; + return 0; +} + static inline void put_user_ns(struct user_namespace *ns) { } diff --git a/include/linux/utsname.h b/include/linux/utsname.h index 2b345206722a..239e27733d6c 100644 --- a/include/linux/utsname.h +++ b/include/linux/utsname.h @@ -23,6 +23,7 @@ struct uts_namespace { struct kref kref; struct new_utsname name; struct user_namespace *user_ns; + unsigned int proc_inum; }; extern struct uts_namespace init_uts_ns; @@ -33,7 +34,7 @@ static inline void get_uts_ns(struct uts_namespace *ns) } extern struct uts_namespace *copy_utsname(unsigned long flags, - struct task_struct *tsk); + struct user_namespace *user_ns, struct uts_namespace *old_ns); extern void free_uts_ns(struct kref *kref); static inline void put_uts_ns(struct uts_namespace *ns) @@ -50,12 +51,12 @@ static inline void put_uts_ns(struct uts_namespace *ns) } static inline struct uts_namespace *copy_utsname(unsigned long flags, - struct task_struct *tsk) + struct user_namespace *user_ns, struct uts_namespace *old_ns) { if (flags & CLONE_NEWUTS) return ERR_PTR(-EINVAL); - return tsk->nsproxy->uts_ns; + return old_ns; } #endif diff --git a/include/linux/vexpress.h b/include/linux/vexpress.h new file mode 100644 index 000000000000..c52215ff4245 --- /dev/null +++ b/include/linux/vexpress.h @@ -0,0 +1,121 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2012 ARM Limited + */ + +#ifndef _LINUX_VEXPRESS_H +#define _LINUX_VEXPRESS_H + +#include <linux/device.h> + +#define VEXPRESS_SITE_MB 0 +#define VEXPRESS_SITE_DB1 1 +#define VEXPRESS_SITE_DB2 2 +#define VEXPRESS_SITE_MASTER 0xf + +#define VEXPRESS_CONFIG_STATUS_DONE 0 +#define VEXPRESS_CONFIG_STATUS_WAIT 1 + +#define VEXPRESS_GPIO_MMC_CARDIN 0 +#define VEXPRESS_GPIO_MMC_WPROT 1 +#define VEXPRESS_GPIO_FLASH_WPn 2 + +#define VEXPRESS_RES_FUNC(_site, _func) \ +{ \ + .start = (_site), \ + .end = (_func), \ + .flags = IORESOURCE_BUS, \ +} + +/* Config bridge API */ + +/** + * struct vexpress_config_bridge_info - description of the platform + * configuration infrastructure bridge. + * + * @name: Bridge name + * + * @func_get: Obtains pointer to a configuration function for a given + * device or a Device Tree node, to be used with @func_put + * and @func_exec. The node pointer should take precedence + * over device pointer when both are passed. + * + * @func_put: Tells the bridge that the function will not be used any + * more, so all allocated resources can be released. + * + * @func_exec: Executes a configuration function read or write operation. + * The offset selects a 32 bit word of the value accessed. + * Must return VEXPRESS_CONFIG_STATUS_DONE when operation + * is finished immediately, VEXPRESS_CONFIG_STATUS_WAIT when + * will be completed in some time or negative value in case + * of error. + */ +struct vexpress_config_bridge_info { + const char *name; + void *(*func_get)(struct device *dev, struct device_node *node); + void (*func_put)(void *func); + int (*func_exec)(void *func, int offset, bool write, u32 *data); +}; + +struct vexpress_config_bridge; + +struct vexpress_config_bridge *vexpress_config_bridge_register( + struct device_node *node, + struct vexpress_config_bridge_info *info); +void vexpress_config_bridge_unregister(struct vexpress_config_bridge *bridge); + +void vexpress_config_complete(struct vexpress_config_bridge *bridge, + int status); + +/* Config function API */ + +struct vexpress_config_func; + +struct vexpress_config_func *__vexpress_config_func_get(struct device *dev, + struct device_node *node); +#define vexpress_config_func_get_by_dev(dev) \ + __vexpress_config_func_get(dev, NULL) +#define vexpress_config_func_get_by_node(node) \ + __vexpress_config_func_get(NULL, node) +void vexpress_config_func_put(struct vexpress_config_func *func); + +/* Both may sleep! */ +int vexpress_config_read(struct vexpress_config_func *func, int offset, + u32 *data); +int vexpress_config_write(struct vexpress_config_func *func, int offset, + u32 data); + +/* Platform control */ + +u32 vexpress_get_procid(int site); +u32 vexpress_get_hbi(int site); +void *vexpress_get_24mhz_clock_base(void); +void vexpress_flags_set(u32 data); + +#define vexpress_get_site_by_node(node) __vexpress_get_site(NULL, node) +#define vexpress_get_site_by_dev(dev) __vexpress_get_site(dev, NULL) +unsigned __vexpress_get_site(struct device *dev, struct device_node *node); + +void vexpress_sysreg_early_init(void __iomem *base); +void vexpress_sysreg_of_early_init(void); + +void vexpress_power_off(void); +void vexpress_restart(char str, const char *cmd); + +/* Clocks */ + +struct clk *vexpress_osc_setup(struct device *dev); +void vexpress_osc_of_setup(struct device_node *node); + +void vexpress_clk_init(void __iomem *sp810_base); +void vexpress_clk_of_init(void); + +#endif diff --git a/include/linux/vgaarb.h b/include/linux/vgaarb.h index 0ee42d9acdc0..2c02f3a8d2ba 100644 --- a/include/linux/vgaarb.h +++ b/include/linux/vgaarb.h @@ -78,7 +78,7 @@ extern void vga_set_legacy_decoding(struct pci_dev *pdev, * This function acquires VGA resources for the given * card and mark those resources locked. If the resource requested * are "normal" (and not legacy) resources, the arbiter will first check - * wether the card is doing legacy decoding for that type of resource. If + * whether the card is doing legacy decoding for that type of resource. If * yes, the lock is "converted" into a legacy resource lock. * The arbiter will first look for all VGA cards that might conflict * and disable their IOs and/or Memory access, including VGA forwarding @@ -89,7 +89,7 @@ extern void vga_set_legacy_decoding(struct pci_dev *pdev, * This function will block if some conflicting card is already locking * one of the required resources (or any resource on a different bus * segment, since P2P bridges don't differenciate VGA memory and IO - * afaik). You can indicate wether this blocking should be interruptible + * afaik). You can indicate whether this blocking should be interruptible * by a signal (for userland interface) or not. * Must not be called at interrupt time or in atomic context. * If the card already owns the resources, the function succeeds. diff --git a/include/linux/vm_event_item.h b/include/linux/vm_event_item.h index 3d3114594370..fce0a2799d43 100644 --- a/include/linux/vm_event_item.h +++ b/include/linux/vm_event_item.h @@ -38,8 +38,18 @@ enum vm_event_item { PGPGIN, PGPGOUT, PSWPIN, PSWPOUT, KSWAPD_LOW_WMARK_HIT_QUICKLY, KSWAPD_HIGH_WMARK_HIT_QUICKLY, KSWAPD_SKIP_CONGESTION_WAIT, PAGEOUTRUN, ALLOCSTALL, PGROTATED, +#ifdef CONFIG_NUMA_BALANCING + NUMA_PTE_UPDATES, + NUMA_HINT_FAULTS, + NUMA_HINT_FAULTS_LOCAL, + NUMA_PAGE_MIGRATE, +#endif +#ifdef CONFIG_MIGRATION + PGMIGRATE_SUCCESS, PGMIGRATE_FAIL, +#endif #ifdef CONFIG_COMPACTION - COMPACTBLOCKS, COMPACTPAGES, COMPACTPAGEFAILED, + COMPACTMIGRATE_SCANNED, COMPACTFREE_SCANNED, + COMPACTISOLATED, COMPACTSTALL, COMPACTFAIL, COMPACTSUCCESS, #endif #ifdef CONFIG_HUGETLB_PAGE @@ -58,6 +68,8 @@ enum vm_event_item { PGPGIN, PGPGOUT, PSWPIN, PSWPOUT, THP_COLLAPSE_ALLOC, THP_COLLAPSE_ALLOC_FAILED, THP_SPLIT, + THP_ZERO_PAGE_ALLOC, + THP_ZERO_PAGE_ALLOC_FAILED, #endif NR_VM_EVENT_ITEMS }; diff --git a/include/linux/vmstat.h b/include/linux/vmstat.h index 92a86b2cce33..a13291f7da88 100644 --- a/include/linux/vmstat.h +++ b/include/linux/vmstat.h @@ -80,6 +80,14 @@ static inline void vm_events_fold_cpu(int cpu) #endif /* CONFIG_VM_EVENT_COUNTERS */ +#ifdef CONFIG_NUMA_BALANCING +#define count_vm_numa_event(x) count_vm_event(x) +#define count_vm_numa_events(x, y) count_vm_events(x, y) +#else +#define count_vm_numa_event(x) do {} while (0) +#define count_vm_numa_events(x, y) do {} while (0) +#endif /* CONFIG_NUMA_BALANCING */ + #define __count_zone_vm_events(item, zone, delta) \ __count_vm_events(item##_NORMAL - ZONE_NORMAL + \ zone_idx(zone), delta) diff --git a/include/linux/vtime.h b/include/linux/vtime.h new file mode 100644 index 000000000000..ae30ab58431a --- /dev/null +++ b/include/linux/vtime.h @@ -0,0 +1,48 @@ +#ifndef _LINUX_KERNEL_VTIME_H +#define _LINUX_KERNEL_VTIME_H + +struct task_struct; + +#ifdef CONFIG_VIRT_CPU_ACCOUNTING +extern void vtime_task_switch(struct task_struct *prev); +extern void vtime_account_system(struct task_struct *tsk); +extern void vtime_account_system_irqsafe(struct task_struct *tsk); +extern void vtime_account_idle(struct task_struct *tsk); +extern void vtime_account_user(struct task_struct *tsk); +extern void vtime_account(struct task_struct *tsk); +#else +static inline void vtime_task_switch(struct task_struct *prev) { } +static inline void vtime_account_system(struct task_struct *tsk) { } +static inline void vtime_account_system_irqsafe(struct task_struct *tsk) { } +static inline void vtime_account(struct task_struct *tsk) { } +#endif + +#ifdef CONFIG_IRQ_TIME_ACCOUNTING +extern void irqtime_account_irq(struct task_struct *tsk); +#else +static inline void irqtime_account_irq(struct task_struct *tsk) { } +#endif + +static inline void vtime_account_irq_enter(struct task_struct *tsk) +{ + /* + * Hardirq can interrupt idle task anytime. So we need vtime_account() + * that performs the idle check in CONFIG_VIRT_CPU_ACCOUNTING. + * Softirq can also interrupt idle task directly if it calls + * local_bh_enable(). Such case probably don't exist but we never know. + * Ksoftirqd is not concerned because idle time is flushed on context + * switch. Softirqs in the end of hardirqs are also not a problem because + * the idle time is flushed on hardirq time already. + */ + vtime_account(tsk); + irqtime_account_irq(tsk); +} + +static inline void vtime_account_irq_exit(struct task_struct *tsk) +{ + /* On hard|softirq exit we always account to hard|softirq cputime */ + vtime_account_system(tsk); + irqtime_account_irq(tsk); +} + +#endif /* _LINUX_KERNEL_VTIME_H */ diff --git a/include/linux/wait.h b/include/linux/wait.h index 168dfe122dd3..7cb64d4b499d 100644 --- a/include/linux/wait.h +++ b/include/linux/wait.h @@ -550,6 +550,170 @@ do { \ __ret; \ }) + +#define __wait_event_lock_irq(wq, condition, lock, cmd) \ +do { \ + DEFINE_WAIT(__wait); \ + \ + for (;;) { \ + prepare_to_wait(&wq, &__wait, TASK_UNINTERRUPTIBLE); \ + if (condition) \ + break; \ + spin_unlock_irq(&lock); \ + cmd; \ + schedule(); \ + spin_lock_irq(&lock); \ + } \ + finish_wait(&wq, &__wait); \ +} while (0) + +/** + * wait_event_lock_irq_cmd - sleep until a condition gets true. The + * condition is checked under the lock. This + * is expected to be called with the lock + * taken. + * @wq: the waitqueue to wait on + * @condition: a C expression for the event to wait for + * @lock: a locked spinlock_t, which will be released before cmd + * and schedule() and reacquired afterwards. + * @cmd: a command which is invoked outside the critical section before + * sleep + * + * The process is put to sleep (TASK_UNINTERRUPTIBLE) until the + * @condition evaluates to true. The @condition is checked each time + * the waitqueue @wq is woken up. + * + * wake_up() has to be called after changing any variable that could + * change the result of the wait condition. + * + * This is supposed to be called while holding the lock. The lock is + * dropped before invoking the cmd and going to sleep and is reacquired + * afterwards. + */ +#define wait_event_lock_irq_cmd(wq, condition, lock, cmd) \ +do { \ + if (condition) \ + break; \ + __wait_event_lock_irq(wq, condition, lock, cmd); \ +} while (0) + +/** + * wait_event_lock_irq - sleep until a condition gets true. The + * condition is checked under the lock. This + * is expected to be called with the lock + * taken. + * @wq: the waitqueue to wait on + * @condition: a C expression for the event to wait for + * @lock: a locked spinlock_t, which will be released before schedule() + * and reacquired afterwards. + * + * The process is put to sleep (TASK_UNINTERRUPTIBLE) until the + * @condition evaluates to true. The @condition is checked each time + * the waitqueue @wq is woken up. + * + * wake_up() has to be called after changing any variable that could + * change the result of the wait condition. + * + * This is supposed to be called while holding the lock. The lock is + * dropped before going to sleep and is reacquired afterwards. + */ +#define wait_event_lock_irq(wq, condition, lock) \ +do { \ + if (condition) \ + break; \ + __wait_event_lock_irq(wq, condition, lock, ); \ +} while (0) + + +#define __wait_event_interruptible_lock_irq(wq, condition, \ + lock, ret, cmd) \ +do { \ + DEFINE_WAIT(__wait); \ + \ + for (;;) { \ + prepare_to_wait(&wq, &__wait, TASK_INTERRUPTIBLE); \ + if (condition) \ + break; \ + if (signal_pending(current)) { \ + ret = -ERESTARTSYS; \ + break; \ + } \ + spin_unlock_irq(&lock); \ + cmd; \ + schedule(); \ + spin_lock_irq(&lock); \ + } \ + finish_wait(&wq, &__wait); \ +} while (0) + +/** + * wait_event_interruptible_lock_irq_cmd - sleep until a condition gets true. + * The condition is checked under the lock. This is expected to + * be called with the lock taken. + * @wq: the waitqueue to wait on + * @condition: a C expression for the event to wait for + * @lock: a locked spinlock_t, which will be released before cmd and + * schedule() and reacquired afterwards. + * @cmd: a command which is invoked outside the critical section before + * sleep + * + * The process is put to sleep (TASK_INTERRUPTIBLE) until the + * @condition evaluates to true or a signal is received. The @condition is + * checked each time the waitqueue @wq is woken up. + * + * wake_up() has to be called after changing any variable that could + * change the result of the wait condition. + * + * This is supposed to be called while holding the lock. The lock is + * dropped before invoking the cmd and going to sleep and is reacquired + * afterwards. + * + * The macro will return -ERESTARTSYS if it was interrupted by a signal + * and 0 if @condition evaluated to true. + */ +#define wait_event_interruptible_lock_irq_cmd(wq, condition, lock, cmd) \ +({ \ + int __ret = 0; \ + \ + if (!(condition)) \ + __wait_event_interruptible_lock_irq(wq, condition, \ + lock, __ret, cmd); \ + __ret; \ +}) + +/** + * wait_event_interruptible_lock_irq - sleep until a condition gets true. + * The condition is checked under the lock. This is expected + * to be called with the lock taken. + * @wq: the waitqueue to wait on + * @condition: a C expression for the event to wait for + * @lock: a locked spinlock_t, which will be released before schedule() + * and reacquired afterwards. + * + * The process is put to sleep (TASK_INTERRUPTIBLE) until the + * @condition evaluates to true or signal is received. The @condition is + * checked each time the waitqueue @wq is woken up. + * + * wake_up() has to be called after changing any variable that could + * change the result of the wait condition. + * + * This is supposed to be called while holding the lock. The lock is + * dropped before going to sleep and is reacquired afterwards. + * + * The macro will return -ERESTARTSYS if it was interrupted by a signal + * and 0 if @condition evaluated to true. + */ +#define wait_event_interruptible_lock_irq(wq, condition, lock) \ +({ \ + int __ret = 0; \ + \ + if (!(condition)) \ + __wait_event_interruptible_lock_irq(wq, condition, \ + lock, __ret, ); \ + __ret; \ +}) + + /* * These are the old interfaces to sleep waiting for an event. * They are racy. DO NOT use them, use the wait_event* interfaces above. diff --git a/include/linux/watchdog.h b/include/linux/watchdog.h index b7f45d48b2de..87490ac4bd87 100644 --- a/include/linux/watchdog.h +++ b/include/linux/watchdog.h @@ -105,7 +105,7 @@ struct watchdog_device { #define WATCHDOG_NOWAYOUT_INIT_STATUS 0 #endif -/* Use the following function to check wether or not the watchdog is active */ +/* Use the following function to check whether or not the watchdog is active */ static inline bool watchdog_active(struct watchdog_device *wdd) { return test_bit(WDOG_ACTIVE, &wdd->status); diff --git a/include/linux/wimax/Kbuild b/include/linux/wimax/Kbuild deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/include/linux/wimax/Kbuild +++ /dev/null diff --git a/include/linux/writeback.h b/include/linux/writeback.h index 50c3e8fa06a8..b82a83aba311 100644 --- a/include/linux/writeback.h +++ b/include/linux/writeback.h @@ -161,14 +161,7 @@ void __bdi_update_bandwidth(struct backing_dev_info *bdi, unsigned long start_time); void page_writeback_init(void); -void balance_dirty_pages_ratelimited_nr(struct address_space *mapping, - unsigned long nr_pages_dirtied); - -static inline void -balance_dirty_pages_ratelimited(struct address_space *mapping) -{ - balance_dirty_pages_ratelimited_nr(mapping, 1); -} +void balance_dirty_pages_ratelimited(struct address_space *mapping); typedef int (*writepage_t)(struct page *page, struct writeback_control *wbc, void *data); |