diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/amd-pstate.h | 10 | ||||
| -rw-r--r-- | include/linux/cpufreq.h | 40 | ||||
| -rw-r--r-- | include/linux/energy_model.h | 166 | ||||
| -rw-r--r-- | include/linux/intel_rapl.h | 6 | ||||
| -rw-r--r-- | include/linux/pm.h | 30 | ||||
| -rw-r--r-- | include/linux/pm_opp.h | 18 | ||||
| -rw-r--r-- | include/linux/pm_runtime.h | 30 | ||||
| -rw-r--r-- | include/linux/scmi_protocol.h | 8 | ||||
| -rw-r--r-- | include/linux/suspend.h | 74 |
9 files changed, 208 insertions, 174 deletions
diff --git a/include/linux/amd-pstate.h b/include/linux/amd-pstate.h index 6ad02ad9c7b4..d21838835abd 100644 --- a/include/linux/amd-pstate.h +++ b/include/linux/amd-pstate.h @@ -39,11 +39,16 @@ struct amd_aperf_mperf { * @cppc_req_cached: cached performance request hints * @highest_perf: the maximum performance an individual processor may reach, * assuming ideal conditions + * For platforms that do not support the preferred core feature, the + * highest_pef may be configured with 166 or 255, to avoid max frequency + * calculated wrongly. we take the fixed value as the highest_perf. * @nominal_perf: the maximum sustained performance level of the processor, * assuming ideal operating conditions * @lowest_nonlinear_perf: the lowest performance level at which nonlinear power * savings are achieved * @lowest_perf: the absolute lowest performance level of the processor + * @prefcore_ranking: the preferred core ranking, the higher value indicates a higher + * priority. * @max_freq: the frequency that mapped to highest_perf * @min_freq: the frequency that mapped to lowest_perf * @nominal_freq: the frequency that mapped to nominal_perf @@ -52,6 +57,9 @@ struct amd_aperf_mperf { * @prev: Last Aperf/Mperf/tsc count value read from register * @freq: current cpu frequency value * @boost_supported: check whether the Processor or SBIOS supports boost mode + * @hw_prefcore: check whether HW supports preferred core featue. + * Only when hw_prefcore and early prefcore param are true, + * AMD P-State driver supports preferred core featue. * @epp_policy: Last saved policy used to set energy-performance preference * @epp_cached: Cached CPPC energy-performance preference value * @policy: Cpufreq policy value @@ -70,6 +78,7 @@ struct amd_cpudata { u32 nominal_perf; u32 lowest_nonlinear_perf; u32 lowest_perf; + u32 prefcore_ranking; u32 min_limit_perf; u32 max_limit_perf; u32 min_limit_freq; @@ -85,6 +94,7 @@ struct amd_cpudata { u64 freq; bool boost_supported; + bool hw_prefcore; /* EPP feature related attributes*/ s16 epp_policy; diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index afda5f24d3dd..836d57579828 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -263,6 +263,7 @@ static inline bool cpufreq_supports_freq_invariance(void) return false; } static inline void disable_cpufreq(void) { } +static inline void cpufreq_update_limits(unsigned int cpu) { } #endif #ifdef CONFIG_CPU_FREQ_STAT @@ -568,9 +569,7 @@ static inline unsigned long cpufreq_scale(unsigned long old, u_int div, /* * The polling frequency depends on the capability of the processor. Default - * polling frequency is 1000 times the transition latency of the processor. The - * ondemand governor will work on any processor with transition latency <= 10ms, - * using appropriate sampling rate. + * polling frequency is 1000 times the transition latency of the processor. */ #define LATENCY_MULTIPLIER (1000) @@ -694,26 +693,6 @@ struct cpufreq_frequency_table { * order */ }; -#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_PM_OPP) -int dev_pm_opp_init_cpufreq_table(struct device *dev, - struct cpufreq_frequency_table **table); -void dev_pm_opp_free_cpufreq_table(struct device *dev, - struct cpufreq_frequency_table **table); -#else -static inline int dev_pm_opp_init_cpufreq_table(struct device *dev, - struct cpufreq_frequency_table - **table) -{ - return -EINVAL; -} - -static inline void dev_pm_opp_free_cpufreq_table(struct device *dev, - struct cpufreq_frequency_table - **table) -{ -} -#endif - /* * cpufreq_for_each_entry - iterate over a cpufreq_frequency_table * @pos: the cpufreq_frequency_table * to use as a loop cursor. @@ -1021,6 +1000,18 @@ static inline int cpufreq_table_find_index_c(struct cpufreq_policy *policy, efficiencies); } +static inline bool cpufreq_is_in_limits(struct cpufreq_policy *policy, int idx) +{ + unsigned int freq; + + if (idx < 0) + return false; + + freq = policy->freq_table[idx].frequency; + + return freq == clamp_val(freq, policy->min, policy->max); +} + static inline int cpufreq_frequency_table_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) @@ -1054,7 +1045,8 @@ retry: return 0; } - if (idx < 0 && efficiencies) { + /* Limit frequency index to honor policy->min/max */ + if (!cpufreq_is_in_limits(policy, idx) && efficiencies) { efficiencies = false; goto retry; } diff --git a/include/linux/energy_model.h b/include/linux/energy_model.h index 88d91e087471..770755df852f 100644 --- a/include/linux/energy_model.h +++ b/include/linux/energy_model.h @@ -5,6 +5,7 @@ #include <linux/device.h> #include <linux/jump_label.h> #include <linux/kobject.h> +#include <linux/kref.h> #include <linux/rcupdate.h> #include <linux/sched/cpufreq.h> #include <linux/sched/topology.h> @@ -12,6 +13,7 @@ /** * struct em_perf_state - Performance state of a performance domain + * @performance: CPU performance (capacity) at a given frequency * @frequency: The frequency in KHz, for consistency with CPUFreq * @power: The power consumed at this level (by 1 CPU or by a registered * device). It can be a total power: static and dynamic. @@ -20,6 +22,7 @@ * @flags: see "em_perf_state flags" description below. */ struct em_perf_state { + unsigned long performance; unsigned long frequency; unsigned long power; unsigned long cost; @@ -37,8 +40,20 @@ struct em_perf_state { #define EM_PERF_STATE_INEFFICIENT BIT(0) /** + * struct em_perf_table - Performance states table + * @rcu: RCU used for safe access and destruction + * @kref: Reference counter to track the users + * @state: List of performance states, in ascending order + */ +struct em_perf_table { + struct rcu_head rcu; + struct kref kref; + struct em_perf_state state[]; +}; + +/** * struct em_perf_domain - Performance domain - * @table: List of performance states, in ascending order + * @em_table: Pointer to the runtime modifiable em_perf_table * @nr_perf_states: Number of performance states * @flags: See "em_perf_domain flags" * @cpus: Cpumask covering the CPUs of the domain. It's here @@ -53,7 +68,7 @@ struct em_perf_state { * field is unused. */ struct em_perf_domain { - struct em_perf_state *table; + struct em_perf_table __rcu *em_table; int nr_perf_states; unsigned long flags; unsigned long cpus[]; @@ -98,27 +113,6 @@ struct em_perf_domain { #define EM_MAX_NUM_CPUS 16 #endif -/* - * To avoid an overflow on 32bit machines while calculating the energy - * use a different order in the operation. First divide by the 'cpu_scale' - * which would reduce big value stored in the 'cost' field, then multiply by - * the 'sum_util'. This would allow to handle existing platforms, which have - * e.g. power ~1.3 Watt at max freq, so the 'cost' value > 1mln micro-Watts. - * In such scenario, where there are 4 CPUs in the Perf. Domain the 'sum_util' - * could be 4096, then multiplication: 'cost' * 'sum_util' would overflow. - * This reordering of operations has some limitations, we lose small - * precision in the estimation (comparing to 64bit platform w/o reordering). - * - * We are safe on 64bit machine. - */ -#ifdef CONFIG_64BIT -#define em_estimate_energy(cost, sum_util, scale_cpu) \ - (((cost) * (sum_util)) / (scale_cpu)) -#else -#define em_estimate_energy(cost, sum_util, scale_cpu) \ - (((cost) / (scale_cpu)) * (sum_util)) -#endif - struct em_data_callback { /** * active_power() - Provide power at the next performance state of @@ -168,40 +162,48 @@ struct em_data_callback { struct em_perf_domain *em_cpu_get(int cpu); struct em_perf_domain *em_pd_get(struct device *dev); +int em_dev_update_perf_domain(struct device *dev, + struct em_perf_table __rcu *new_table); int em_dev_register_perf_domain(struct device *dev, unsigned int nr_states, struct em_data_callback *cb, cpumask_t *span, bool microwatts); void em_dev_unregister_perf_domain(struct device *dev); +struct em_perf_table __rcu *em_table_alloc(struct em_perf_domain *pd); +void em_table_free(struct em_perf_table __rcu *table); +int em_dev_compute_costs(struct device *dev, struct em_perf_state *table, + int nr_states); /** * em_pd_get_efficient_state() - Get an efficient performance state from the EM - * @pd : Performance domain for which we want an efficient frequency - * @freq : Frequency to map with the EM + * @table: List of performance states, in ascending order + * @nr_perf_states: Number of performance states + * @max_util: Max utilization to map with the EM + * @pd_flags: Performance Domain flags * * It is called from the scheduler code quite frequently and as a consequence * doesn't implement any check. * - * Return: An efficient performance state, high enough to meet @freq + * Return: An efficient performance state id, high enough to meet @max_util * requirement. */ -static inline -struct em_perf_state *em_pd_get_efficient_state(struct em_perf_domain *pd, - unsigned long freq) +static inline int +em_pd_get_efficient_state(struct em_perf_state *table, int nr_perf_states, + unsigned long max_util, unsigned long pd_flags) { struct em_perf_state *ps; int i; - for (i = 0; i < pd->nr_perf_states; i++) { - ps = &pd->table[i]; - if (ps->frequency >= freq) { - if (pd->flags & EM_PERF_DOMAIN_SKIP_INEFFICIENCIES && + for (i = 0; i < nr_perf_states; i++) { + ps = &table[i]; + if (ps->performance >= max_util) { + if (pd_flags & EM_PERF_DOMAIN_SKIP_INEFFICIENCIES && ps->flags & EM_PERF_STATE_INEFFICIENT) continue; - break; + return i; } } - return ps; + return nr_perf_states - 1; } /** @@ -224,9 +226,13 @@ static inline unsigned long em_cpu_energy(struct em_perf_domain *pd, unsigned long max_util, unsigned long sum_util, unsigned long allowed_cpu_cap) { - unsigned long freq, ref_freq, scale_cpu; + struct em_perf_table *em_table; struct em_perf_state *ps; - int cpu; + int i; + +#ifdef CONFIG_SCHED_DEBUG + WARN_ONCE(!rcu_read_lock_held(), "EM: rcu read lock needed\n"); +#endif if (!sum_util) return 0; @@ -234,31 +240,30 @@ static inline unsigned long em_cpu_energy(struct em_perf_domain *pd, /* * In order to predict the performance state, map the utilization of * the most utilized CPU of the performance domain to a requested - * frequency, like schedutil. Take also into account that the real - * frequency might be set lower (due to thermal capping). Thus, clamp + * performance, like schedutil. Take also into account that the real + * performance might be set lower (due to thermal capping). Thus, clamp * max utilization to the allowed CPU capacity before calculating - * effective frequency. + * effective performance. */ - cpu = cpumask_first(to_cpumask(pd->cpus)); - scale_cpu = arch_scale_cpu_capacity(cpu); - ref_freq = arch_scale_freq_ref(cpu); - + max_util = map_util_perf(max_util); max_util = min(max_util, allowed_cpu_cap); - freq = map_util_freq(max_util, ref_freq, scale_cpu); /* * Find the lowest performance state of the Energy Model above the - * requested frequency. + * requested performance. */ - ps = em_pd_get_efficient_state(pd, freq); + em_table = rcu_dereference(pd->em_table); + i = em_pd_get_efficient_state(em_table->state, pd->nr_perf_states, + max_util, pd->flags); + ps = &em_table->state[i]; /* - * The capacity of a CPU in the domain at the performance state (ps) - * can be computed as: + * The performance (capacity) of a CPU in the domain at the performance + * state (ps) can be computed as: * - * ps->freq * scale_cpu - * ps->cap = -------------------- (1) - * cpu_max_freq + * ps->freq * scale_cpu + * ps->performance = -------------------- (1) + * cpu_max_freq * * So, ignoring the costs of idle states (which are not available in * the EM), the energy consumed by this CPU at that performance state @@ -266,9 +271,10 @@ static inline unsigned long em_cpu_energy(struct em_perf_domain *pd, * * ps->power * cpu_util * cpu_nrg = -------------------- (2) - * ps->cap + * ps->performance * - * since 'cpu_util / ps->cap' represents its percentage of busy time. + * since 'cpu_util / ps->performance' represents its percentage of busy + * time. * * NOTE: Although the result of this computation actually is in * units of power, it can be manipulated as an energy value @@ -278,9 +284,9 @@ static inline unsigned long em_cpu_energy(struct em_perf_domain *pd, * By injecting (1) in (2), 'cpu_nrg' can be re-expressed as a product * of two terms: * - * ps->power * cpu_max_freq cpu_util - * cpu_nrg = ------------------------ * --------- (3) - * ps->freq scale_cpu + * ps->power * cpu_max_freq + * cpu_nrg = ------------------------ * cpu_util (3) + * ps->freq * scale_cpu * * The first term is static, and is stored in the em_perf_state struct * as 'ps->cost'. @@ -290,11 +296,9 @@ static inline unsigned long em_cpu_energy(struct em_perf_domain *pd, * total energy of the domain (which is the simple sum of the energy of * all of its CPUs) can be factorized as: * - * ps->cost * \Sum cpu_util - * pd_nrg = ------------------------ (4) - * scale_cpu + * pd_nrg = ps->cost * \Sum cpu_util (4) */ - return em_estimate_energy(ps->cost, sum_util, scale_cpu); + return ps->cost * sum_util; } /** @@ -309,6 +313,23 @@ static inline int em_pd_nr_perf_states(struct em_perf_domain *pd) return pd->nr_perf_states; } +/** + * em_perf_state_from_pd() - Get the performance states table of perf. + * domain + * @pd : performance domain for which this must be done + * + * To use this function the rcu_read_lock() should be hold. After the usage + * of the performance states table is finished, the rcu_read_unlock() should + * be called. + * + * Return: the pointer to performance states table of the performance domain + */ +static inline +struct em_perf_state *em_perf_state_from_pd(struct em_perf_domain *pd) +{ + return rcu_dereference(pd->em_table)->state; +} + #else struct em_data_callback {}; #define EM_ADV_DATA_CB(_active_power_cb, _cost_cb) { } @@ -343,6 +364,29 @@ static inline int em_pd_nr_perf_states(struct em_perf_domain *pd) { return 0; } +static inline +struct em_perf_table __rcu *em_table_alloc(struct em_perf_domain *pd) +{ + return NULL; +} +static inline void em_table_free(struct em_perf_table __rcu *table) {} +static inline +int em_dev_update_perf_domain(struct device *dev, + struct em_perf_table __rcu *new_table) +{ + return -EINVAL; +} +static inline +struct em_perf_state *em_perf_state_from_pd(struct em_perf_domain *pd) +{ + return NULL; +} +static inline +int em_dev_compute_costs(struct device *dev, struct em_perf_state *table, + int nr_states) +{ + return -EINVAL; +} #endif #endif diff --git a/include/linux/intel_rapl.h b/include/linux/intel_rapl.h index 33f21bd85dbf..f3196f82fd8a 100644 --- a/include/linux/intel_rapl.h +++ b/include/linux/intel_rapl.h @@ -178,6 +178,12 @@ struct rapl_package { struct rapl_if_priv *priv; }; +struct rapl_package *rapl_find_package_domain_cpuslocked(int id, struct rapl_if_priv *priv, + bool id_is_cpu); +struct rapl_package *rapl_add_package_cpuslocked(int id, struct rapl_if_priv *priv, + bool id_is_cpu); +void rapl_remove_package_cpuslocked(struct rapl_package *rp); + struct rapl_package *rapl_find_package_domain(int id, struct rapl_if_priv *priv, bool id_is_cpu); struct rapl_package *rapl_add_package(int id, struct rapl_if_priv *priv, bool id_is_cpu); void rapl_remove_package(struct rapl_package *rp); diff --git a/include/linux/pm.h b/include/linux/pm.h index a2f3e53a8196..97b0e23363c8 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -662,8 +662,8 @@ struct pm_subsys_data { struct dev_pm_info { pm_message_t power_state; - unsigned int can_wakeup:1; - unsigned int async_suspend:1; + bool can_wakeup:1; + bool async_suspend:1; bool in_dpm_list:1; /* Owned by the PM core */ bool is_prepared:1; /* Owned by the PM core */ bool is_suspended:1; /* Ditto */ @@ -682,10 +682,10 @@ struct dev_pm_info { bool syscore:1; bool no_pm_callbacks:1; /* Owned by the PM core */ bool async_in_progress:1; /* Owned by the PM core */ - unsigned int must_resume:1; /* Owned by the PM core */ - unsigned int may_skip_resume:1; /* Set by subsystems */ + bool must_resume:1; /* Owned by the PM core */ + bool may_skip_resume:1; /* Set by subsystems */ #else - unsigned int should_wakeup:1; + bool should_wakeup:1; #endif #ifdef CONFIG_PM struct hrtimer suspend_timer; @@ -696,17 +696,17 @@ struct dev_pm_info { atomic_t usage_count; atomic_t child_count; unsigned int disable_depth:3; - unsigned int idle_notification:1; - unsigned int request_pending:1; - unsigned int deferred_resume:1; - unsigned int needs_force_resume:1; - unsigned int runtime_auto:1; + bool idle_notification:1; + bool request_pending:1; + bool deferred_resume:1; + bool needs_force_resume:1; + bool runtime_auto:1; bool ignore_children:1; - unsigned int no_callbacks:1; - unsigned int irq_safe:1; - unsigned int use_autosuspend:1; - unsigned int timer_autosuspends:1; - unsigned int memalloc_noio:1; + bool no_callbacks:1; + bool irq_safe:1; + bool use_autosuspend:1; + bool timer_autosuspends:1; + bool memalloc_noio:1; unsigned int links_count; enum rpm_request request; enum rpm_status runtime_status; diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h index 76dcb7f37bcd..065a47382302 100644 --- a/include/linux/pm_opp.h +++ b/include/linux/pm_opp.h @@ -16,6 +16,7 @@ #include <linux/notifier.h> struct clk; +struct cpufreq_frequency_table; struct regulator; struct dev_pm_opp; struct device; @@ -87,12 +88,14 @@ struct dev_pm_opp_config { /** * struct dev_pm_opp_data - The data to use to initialize an OPP. + * @turbo: Flag to indicate whether the OPP is to be marked turbo or not. * @level: The performance level for the OPP. Set level to OPP_LEVEL_UNSET if * level field isn't used. * @freq: The clock rate in Hz for the OPP. * @u_volt: The voltage in uV for the OPP. */ struct dev_pm_opp_data { + bool turbo; unsigned int level; unsigned long freq; unsigned long u_volt; @@ -444,6 +447,21 @@ static inline int dev_pm_opp_sync_regulators(struct device *dev) #endif /* CONFIG_PM_OPP */ +#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_PM_OPP) +int dev_pm_opp_init_cpufreq_table(struct device *dev, struct cpufreq_frequency_table **table); +void dev_pm_opp_free_cpufreq_table(struct device *dev, struct cpufreq_frequency_table **table); +#else +static inline int dev_pm_opp_init_cpufreq_table(struct device *dev, struct cpufreq_frequency_table **table) +{ + return -EINVAL; +} + +static inline void dev_pm_opp_free_cpufreq_table(struct device *dev, struct cpufreq_frequency_table **table) +{ +} +#endif + + #if defined(CONFIG_PM_OPP) && defined(CONFIG_OF) int dev_pm_opp_of_add_table(struct device *dev); int dev_pm_opp_of_add_table_indexed(struct device *dev, int index); diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h index 7c9b35448563..d39dc863f612 100644 --- a/include/linux/pm_runtime.h +++ b/include/linux/pm_runtime.h @@ -72,7 +72,8 @@ extern int pm_runtime_force_resume(struct device *dev); extern int __pm_runtime_idle(struct device *dev, int rpmflags); extern int __pm_runtime_suspend(struct device *dev, int rpmflags); extern int __pm_runtime_resume(struct device *dev, int rpmflags); -extern int pm_runtime_get_if_active(struct device *dev, bool ign_usage_count); +extern int pm_runtime_get_if_active(struct device *dev); +extern int pm_runtime_get_if_in_use(struct device *dev); extern int pm_schedule_suspend(struct device *dev, unsigned int delay); extern int __pm_runtime_set_status(struct device *dev, unsigned int status); extern int pm_runtime_barrier(struct device *dev); @@ -95,18 +96,6 @@ extern void pm_runtime_release_supplier(struct device_link *link); extern int devm_pm_runtime_enable(struct device *dev); /** - * pm_runtime_get_if_in_use - Conditionally bump up runtime PM usage counter. - * @dev: Target device. - * - * Increment the runtime PM usage counter of @dev if its runtime PM status is - * %RPM_ACTIVE and its runtime PM usage counter is greater than 0. - */ -static inline int pm_runtime_get_if_in_use(struct device *dev) -{ - return pm_runtime_get_if_active(dev, false); -} - -/** * pm_suspend_ignore_children - Set runtime PM behavior regarding children. * @dev: Target device. * @enable: Whether or not to ignore possible dependencies on children. @@ -275,8 +264,7 @@ static inline int pm_runtime_get_if_in_use(struct device *dev) { return -EINVAL; } -static inline int pm_runtime_get_if_active(struct device *dev, - bool ign_usage_count) +static inline int pm_runtime_get_if_active(struct device *dev) { return -EINVAL; } @@ -461,6 +449,18 @@ static inline int pm_runtime_put(struct device *dev) } /** + * __pm_runtime_put_autosuspend - Drop device usage counter and queue autosuspend if 0. + * @dev: Target device. + * + * Decrement the runtime PM usage counter of @dev and if it turns out to be + * equal to 0, queue up a work item for @dev like in pm_request_autosuspend(). + */ +static inline int __pm_runtime_put_autosuspend(struct device *dev) +{ + return __pm_runtime_suspend(dev, RPM_GET_PUT | RPM_ASYNC | RPM_AUTO); +} + +/** * pm_runtime_put_autosuspend - Drop device usage counter and queue autosuspend if 0. * @dev: Target device. * diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h index 2ee94ff0320c..b807141acc14 100644 --- a/include/linux/scmi_protocol.h +++ b/include/linux/scmi_protocol.h @@ -140,6 +140,8 @@ struct scmi_perf_domain_info { * @level_set: sets the performance level of a domain * @level_get: gets the performance level of a domain * @transition_latency_get: gets the DVFS transition latency for a given device + * @rate_limit_get: gets the minimum time (us) required between successive + * requests * @device_opps_add: adds all the OPPs for a given device * @freq_set: sets the frequency for a given device using sustained frequency * to sustained performance level mapping @@ -149,6 +151,8 @@ struct scmi_perf_domain_info { * at a given frequency * @fast_switch_possible: indicates if fast DVFS switching is possible or not * for a given device + * @fast_switch_rate_limit: gets the minimum time (us) required between + * successive fast_switching requests * @power_scale_mw_get: indicates if the power values provided are in milliWatts * or in some other (abstract) scale */ @@ -166,6 +170,8 @@ struct scmi_perf_proto_ops { u32 *level, bool poll); int (*transition_latency_get)(const struct scmi_protocol_handle *ph, u32 domain); + int (*rate_limit_get)(const struct scmi_protocol_handle *ph, + u32 domain, u32 *rate_limit); int (*device_opps_add)(const struct scmi_protocol_handle *ph, struct device *dev, u32 domain); int (*freq_set)(const struct scmi_protocol_handle *ph, u32 domain, @@ -176,6 +182,8 @@ struct scmi_perf_proto_ops { unsigned long *rate, unsigned long *power); bool (*fast_switch_possible)(const struct scmi_protocol_handle *ph, u32 domain); + int (*fast_switch_rate_limit)(const struct scmi_protocol_handle *ph, + u32 domain, u32 *rate_limit); enum scmi_power_scale (*power_scale_get)(const struct scmi_protocol_handle *ph); }; diff --git a/include/linux/suspend.h b/include/linux/suspend.h index ef503088942d..da6ebca3ff77 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -40,65 +40,6 @@ typedef int __bitwise suspend_state_t; #define PM_SUSPEND_MIN PM_SUSPEND_TO_IDLE #define PM_SUSPEND_MAX ((__force suspend_state_t) 4) -enum suspend_stat_step { - SUSPEND_FREEZE = 1, - SUSPEND_PREPARE, - SUSPEND_SUSPEND, - SUSPEND_SUSPEND_LATE, - SUSPEND_SUSPEND_NOIRQ, - SUSPEND_RESUME_NOIRQ, - SUSPEND_RESUME_EARLY, - SUSPEND_RESUME -}; - -struct suspend_stats { - int success; - int fail; - int failed_freeze; - int failed_prepare; - int failed_suspend; - int failed_suspend_late; - int failed_suspend_noirq; - int failed_resume; - int failed_resume_early; - int failed_resume_noirq; -#define REC_FAILED_NUM 2 - int last_failed_dev; - char failed_devs[REC_FAILED_NUM][40]; - int last_failed_errno; - int errno[REC_FAILED_NUM]; - int last_failed_step; - u64 last_hw_sleep; - u64 total_hw_sleep; - u64 max_hw_sleep; - enum suspend_stat_step failed_steps[REC_FAILED_NUM]; -}; - -extern struct suspend_stats suspend_stats; - -static inline void dpm_save_failed_dev(const char *name) -{ - strscpy(suspend_stats.failed_devs[suspend_stats.last_failed_dev], - name, - sizeof(suspend_stats.failed_devs[0])); - suspend_stats.last_failed_dev++; - suspend_stats.last_failed_dev %= REC_FAILED_NUM; -} - -static inline void dpm_save_failed_errno(int err) -{ - suspend_stats.errno[suspend_stats.last_failed_errno] = err; - suspend_stats.last_failed_errno++; - suspend_stats.last_failed_errno %= REC_FAILED_NUM; -} - -static inline void dpm_save_failed_step(enum suspend_stat_step step) -{ - suspend_stats.failed_steps[suspend_stats.last_failed_step] = step; - suspend_stats.last_failed_step++; - suspend_stats.last_failed_step %= REC_FAILED_NUM; -} - /** * struct platform_suspend_ops - Callbacks for managing platform dependent * system sleep states. @@ -626,4 +567,19 @@ static inline void queue_up_suspend_work(void) {} #endif /* !CONFIG_PM_AUTOSLEEP */ +enum suspend_stat_step { + SUSPEND_WORKING = 0, + SUSPEND_FREEZE, + SUSPEND_PREPARE, + SUSPEND_SUSPEND, + SUSPEND_SUSPEND_LATE, + SUSPEND_SUSPEND_NOIRQ, + SUSPEND_RESUME_NOIRQ, + SUSPEND_RESUME_EARLY, + SUSPEND_RESUME +}; + +void dpm_save_failed_dev(const char *name); +void dpm_save_failed_step(enum suspend_stat_step step); + #endif /* _LINUX_SUSPEND_H */ |