diff options
Diffstat (limited to 'include/linux/mmc')
| -rw-r--r-- | include/linux/mmc/card.h | 3 | ||||
| -rw-r--r-- | include/linux/mmc/host.h | 11 | ||||
| -rw-r--r-- | include/linux/mmc/mmc.h | 66 |
3 files changed, 78 insertions, 2 deletions
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 9478a6bf1bb1..9f22ba572de0 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -216,6 +216,7 @@ struct mmc_card { #define MMC_STATE_ULTRAHIGHSPEED (1<<5) /* card is in ultra high speed mode */ #define MMC_CARD_SDXC (1<<6) /* card is SDXC */ #define MMC_CARD_REMOVED (1<<7) /* card has been removed */ +#define MMC_STATE_HIGHSPEED_200 (1<<8) /* card is in HS200 mode */ unsigned int quirks; /* card quirks */ #define MMC_QUIRK_LENIENT_FN0 (1<<0) /* allow SDIO FN0 writes outside of the VS CCCR range */ #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1) /* use func->cur_blksize */ @@ -374,6 +375,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) #define mmc_card_present(c) ((c)->state & MMC_STATE_PRESENT) #define mmc_card_readonly(c) ((c)->state & MMC_STATE_READONLY) #define mmc_card_highspeed(c) ((c)->state & MMC_STATE_HIGHSPEED) +#define mmc_card_hs200(c) ((c)->state & MMC_STATE_HIGHSPEED_200) #define mmc_card_blockaddr(c) ((c)->state & MMC_STATE_BLOCKADDR) #define mmc_card_ddr_mode(c) ((c)->state & MMC_STATE_HIGHSPEED_DDR) #define mmc_card_uhs(c) ((c)->state & MMC_STATE_ULTRAHIGHSPEED) @@ -384,6 +386,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data) #define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT) #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY) #define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED) +#define mmc_card_set_hs200(c) ((c)->state |= MMC_STATE_HIGHSPEED_200) #define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR) #define mmc_card_set_ddr_mode(c) ((c)->state |= MMC_STATE_HIGHSPEED_DDR) #define mmc_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED) diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 031d865167a2..dd13e0539092 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -56,10 +56,13 @@ struct mmc_ios { #define MMC_TIMING_UHS_SDR50 3 #define MMC_TIMING_UHS_SDR104 4 #define MMC_TIMING_UHS_DDR50 5 +#define MMC_TIMING_MMC_HS200 6 #define MMC_SDR_MODE 0 #define MMC_1_2V_DDR_MODE 1 #define MMC_1_8V_DDR_MODE 2 +#define MMC_1_2V_SDR_MODE 3 +#define MMC_1_8V_SDR_MODE 4 unsigned char signal_voltage; /* signalling voltage (1.8V or 3.3V) */ @@ -148,7 +151,9 @@ struct mmc_host_ops { void (*init_card)(struct mmc_host *host, struct mmc_card *card); int (*start_signal_voltage_switch)(struct mmc_host *host, struct mmc_ios *ios); - int (*execute_tuning)(struct mmc_host *host); + + /* The tuning command opcode value is different for SD and eMMC cards */ + int (*execute_tuning)(struct mmc_host *host, u32 opcode); void (*enable_preset_value)(struct mmc_host *host, bool enable); int (*select_drive_strength)(unsigned int max_dtr, int host_drv, int card_drv); void (*hw_reset)(struct mmc_host *host); @@ -248,6 +253,10 @@ struct mmc_host { #define MMC_CAP2_POWEROFF_NOTIFY (1 << 2) /* Notify poweroff supported */ #define MMC_CAP2_NO_MULTI_READ (1 << 3) /* Multiblock reads don't work */ #define MMC_CAP2_NO_SLEEP_CMD (1 << 4) /* Don't allow sleep command */ +#define MMC_CAP2_HS200_1_8V_SDR (1 << 5) /* can support */ +#define MMC_CAP2_HS200_1_2V_SDR (1 << 6) /* can support */ +#define MMC_CAP2_HS200 (MMC_CAP2_HS200_1_8V_SDR | \ + MMC_CAP2_HS200_1_2V_SDR) mmc_pm_flag_t pm_caps; /* supported pm features */ unsigned int power_notify_type; diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 665548e639e8..fb9f6e116e1c 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -51,6 +51,7 @@ #define MMC_READ_SINGLE_BLOCK 17 /* adtc [31:0] data addr R1 */ #define MMC_READ_MULTIPLE_BLOCK 18 /* adtc [31:0] data addr R1 */ #define MMC_SEND_TUNING_BLOCK 19 /* adtc R1 */ +#define MMC_SEND_TUNING_BLOCK_HS200 21 /* adtc R1 */ /* class 3 */ #define MMC_WRITE_DAT_UNTIL_STOP 20 /* adtc [31:0] data addr R1 */ @@ -339,13 +340,76 @@ struct _mmc_csd { #define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */ #define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */ -#define EXT_CSD_CARD_TYPE_MASK 0xF /* Mask out reserved bits */ +#define EXT_CSD_CARD_TYPE_MASK 0x3F /* Mask out reserved bits */ #define EXT_CSD_CARD_TYPE_DDR_1_8V (1<<2) /* Card can run at 52MHz */ /* DDR mode @1.8V or 3V I/O */ #define EXT_CSD_CARD_TYPE_DDR_1_2V (1<<3) /* Card can run at 52MHz */ /* DDR mode @1.2V I/O */ #define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \ | EXT_CSD_CARD_TYPE_DDR_1_2V) +#define EXT_CSD_CARD_TYPE_SDR_1_8V (1<<4) /* Card can run at 200MHz */ +#define EXT_CSD_CARD_TYPE_SDR_1_2V (1<<5) /* Card can run at 200MHz */ + /* SDR mode @1.2V I/O */ + +#define EXT_CSD_CARD_TYPE_SDR_200 (EXT_CSD_CARD_TYPE_SDR_1_8V | \ + EXT_CSD_CARD_TYPE_SDR_1_2V) + +#define EXT_CSD_CARD_TYPE_SDR_ALL (EXT_CSD_CARD_TYPE_SDR_200 | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_1_2V_ALL (EXT_CSD_CARD_TYPE_SDR_1_2V | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_1_8V_ALL (EXT_CSD_CARD_TYPE_SDR_1_8V | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_8V (EXT_CSD_CARD_TYPE_SDR_1_2V | \ + EXT_CSD_CARD_TYPE_DDR_1_8V | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_8V (EXT_CSD_CARD_TYPE_SDR_1_8V | \ + EXT_CSD_CARD_TYPE_DDR_1_8V | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_2V (EXT_CSD_CARD_TYPE_SDR_1_2V | \ + EXT_CSD_CARD_TYPE_DDR_1_2V | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_2V (EXT_CSD_CARD_TYPE_SDR_1_8V | \ + EXT_CSD_CARD_TYPE_DDR_1_2V | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_52 (EXT_CSD_CARD_TYPE_SDR_1_2V | \ + EXT_CSD_CARD_TYPE_DDR_52 | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_52 (EXT_CSD_CARD_TYPE_SDR_1_8V | \ + EXT_CSD_CARD_TYPE_DDR_52 | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_8V (EXT_CSD_CARD_TYPE_SDR_200 | \ + EXT_CSD_CARD_TYPE_DDR_1_8V | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_2V (EXT_CSD_CARD_TYPE_SDR_200 | \ + EXT_CSD_CARD_TYPE_DDR_1_2V | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) + +#define EXT_CSD_CARD_TYPE_SDR_ALL_DDR_52 (EXT_CSD_CARD_TYPE_SDR_200 | \ + EXT_CSD_CARD_TYPE_DDR_52 | \ + EXT_CSD_CARD_TYPE_52 | \ + EXT_CSD_CARD_TYPE_26) #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ |